IOP-29401004 Lift Table Ladder (LTL-2034-133)

From Battery Handling Systems
Revision as of 15:59, 12 October 2026 by Tingx (talk | contribs) (Add label artwork links)
Jump to navigation Jump to search


Looking for a specific replacement part? Ctrl-F (or Command-F for Mac users) brings up your browsers search panel and can search any text on the entire web page.

California Residents: WARNING: This product contains chemicals known to the State of California to cause cancer and/or reproductive harm. Learn more here.

Manual-icon.png Parts & Service Manual (PDF): IOP-29401004 Lift Table Ladder NS.pdf

Related manual: IOP-29401001 Lift Table Ladder

Lift Table Ladder NS Parts & Services Manual

General Information

Read and understand this manual before installation, use, and maintenance for your lift. Please be sure that no individual is allowed to use this lift unless they have been fully trained and familiarized with the operating instructions of this manual. Also, ensure that at least one person on site is familiar with the maintenance section of this manual and is responsible for performing the defined tasks. If you have any questions, contact BHS Technical Support 1.877.BHS.4YOU (1.877.247.4968) or visit tech.bhs1.com.

Lift Table Ladder (LTL) NS vertically positions materials at comfortable heights for improved ergonomics and productivity. Document number IOP-29401004. Drawing number 29401004 (Lift Table Ladder NS).

General Safety

Read-icon.jpg

  • Read and understand all instructions and warnings before using or servicing this equipment.
  • Keep these instructions for future reference.
  • This unit shall only be used indoors in an industrial setting on a hard, nonslip, and level floor.
  • Perform system and safety checks before operating.
  • Failure to follow these instructions and warnings may result in property damage, personal injury or death.

WORK AREA

  • Keep work area clean and well lit.
  • Clean up/contain any fluid spills immediately to prevent slips or falls.
  • Be aware of potential hazards when performing any service or maintenance to the unit.

SERVICE & MAINTENANCE

Service personnel shall wear Personal Protective Equipment (PPE) appropriate for the task being performed.

LOCKOUT/TAGOUT

Lockout/tagout the LTL unit if damaged or not functioning properly. Lockout/tagout and de-energize all systems prior to performing any maintenance or service.

LEAD-ACID BATTERIES – EXPLOSION HAZARD

DANGER

DO NOT allow open flames or sparks of any kind near a battery. Always wear appropriate PPE when servicing lead-acid batteries.

NOTICE

This unit is not approved for outdoor use.

WARNING

Any instance in which the lift table ladder is impacted by a fork truck or other equipment, the unit should be inspected for structural integrity.

WARNING

Only one person may occupy and operate this unit at a time.

Operational Safety

Modifications shall not be made without prior written consent from the manufacturer.

NOTICE NEVER EXCEED THE RATED CAPACITY (450 LBS).

NOTICE NEVER ALLOW OPERATION IF THE LOAD IS NOT CENTERED. NOTICE ALWAYS ALLOW THE LTL TO COME TO A COMPLETE STOP PRIOR TO HANDLING.

DANGER ALWAYS KEEP LTL TRAVEL PATH CLEAR.

DANGER ALWAYS ENGAGE FLOOR LOCK PRIOR TO OPERATION.

Document and drawings

Safety & Warning Labels

Label part numbers from IOP-29401004:

  • 00196216 — LABEL-HAZARD-CHAIN ENTANGLEMENT (2)
  • 00196416 — LABEL-LMPS SAFETY (1)
  • 00196424 — LABEL-DANGER-NO RIDERS (3)
  • 00196429 — LABEL-DANGER-MAX OCCUPANCY (1)
  • 00196758 — LABEL-CAPACITY-450 LB (1)

LABEL-CAPACITY-450 LB.png LABEL-LMPS SAFETY.png Warning-ChainEntanglement-Icon.png

Parts Sections

Full chassis and electrical parts lists and drawings are in the PDF manual:

Shared reference figures:

  • Chassis reference
  • Electrical reference
  • Controls

See also

Package assets

Linked assets from the IOP-29401004 InDesign package (uploaded for reference with this NS manual).

Manuals and drawings

Label artwork