IOP-29401004 Lift Table Ladder (LTL-2034-133)

From Battery Handling Systems
Revision as of 16:06, 12 October 2026 by Tingx (talk | contribs) (NS layout=11/50)
Jump to navigation Jump to search


Looking for a specific replacement part? Ctrl-F (or Command-F for Mac users) brings up your browsers search panel and can search any text on the entire web page. Find parts by searching a part # or part description.

California Residents: WARNING: This product contains chemicals known to the State of California to cause cancer and/or reproductive harm, and birth defects or other reproductive harm. Learn more here.


Manual-icon.png Parts & Service Manual (PDF): IOP-29401004 Lift Table Ladder NS.pdf

Related manual: IOP-29401001 Lift Table Ladder

Lift Table Ladder NS Parts & Services Manual

General Information

Read and understand this manual before installation, use, and maintenance for your lift. Please be sure that no individual is allowed to use this lift unless they have been fully trained and familiarized with the operating instructions of this manual. Also, ensure that at least one person on site is familiar with the maintenance section of this manual and is responsible for performing the defined tasks. If you have 

any questions regarding operation, service, or the contents of this manual, please contact your dealer or BHS Technical Support 1.877.BHS.4YOU (1.877.247.4968) or visit tech.bhs1.com.

Lift Table Ladder (LTL) NS vertically positions materials at comfortable heights for improved ergonomics and productivity. Document number IOP-29401004. Drawing number 29401004 (est. weight 1023 LBS). The Lift Table Ladder is designed to reduce physical strain, fatigue, and prevent injury by eliminating heavy lifting, bending, and reaching. Please consult a dealer or sales representative for application specific needs.

General Safety

Read-icon.jpg

  • Read and understand all instructions and warnings before using or servicing this equipment.
  • Keep these instructions for future reference.
  • This unit shall only be used indoors in an industrial setting on a hard, nonslip, and level floor without irregularities including but not limited to holes, gouges, cracks, drains or obstacles comprised of concrete or other suitable industrial material.
  • Perform system and safety checks before operating.
  • Failure to follow these instructions and warnings may result in property damage, personal injury or death.

WORK AREA

  • Keep work area clean and well lit.  Cluttered work areas and poor lighting can lead to accidents.
  • Clean up/contain any fluid spills immediately to prevent slips or falls.
  • Be aware of potential hazards when performing any service or maintenance to the unit.

SERVICE & MAINTENANCE

Service personnel shall wear Personal Protective Equipment (PPE) appropriate for the task being performed.

LOCKOUT/TAGOUT

Lockout/tagout the LTL unit if damaged or not functioning properly.  Lockout/tagout and de-energize all systems prior to performing any maintenance or service to unit(s).

LEAD-ACID BATTERIES – EXPLOSION HAZARD

DANGER

DO NOT allow open flames or sparks of any kind near a battery.  Highly explosive gas is generated when charging a battery that can remain in battery cells for extended periods of time after charging is complete.

  • Always wear appropriate PPE including rubber apron, gloves, boots and full face shield when performing service or maintenance to any lead-acid batteries.

NOTICE

Retrieved from "https://tech.bhs1.com/index.php?title=IOP-29401004_Lift_Table_Ladder_(LTL-2034-133)&oldid=7782"