IOP-29401004 Lift Table Ladder (LTL-2034-133)

From Battery Handling Systems
Revision as of 15:36, 12 October 2026 by Tingx (talk | contribs) (Append section 2)
Jump to navigation Jump to search


Looking for a specific replacement part? Ctrl-F (or Command-F for Mac users) brings up your browsers search panel and can search any text on the entire web page.

California Residents: WARNING: This product contains chemicals known to the State of California to cause cancer and/or reproductive harm. Learn more here.

Manual-icon.png Parts & Service Manual (PDF): IOP-29401004 Lift Table Ladder NS.pdf

Related manual: IOP-29401001 Lift Table Ladder

Lift Table Ladder NS Parts & Services Manual

General Information

Read and understand this manual before installation, use, and maintenance for your lift. Please be sure that no individual is allowed to use this lift unless they have been fully trained and familiarized with the operating instructions of this manual. Also, ensure that at least one person on site is familiar with the maintenance section of this manual and is responsible for performing the defined tasks. If you have any questions, contact BHS Technical Support 1.877.BHS.4YOU (1.877.247.4968) or visit tech.bhs1.com.

Lift Table Ladder (LTL) NS vertically positions materials at comfortable heights for improved ergonomics and productivity. Document number IOP-29401004. Drawing number 29401004 (Lift Table Ladder NS).

General Safety

Read-icon.jpg

  • Read and understand all instructions and warnings before using or servicing this equipment.
  • Keep these instructions for future reference.
  • This unit shall only be used indoors in an industrial setting on a hard, nonslip, and level floor.
  • Perform system and safety checks before operating.
  • Failure to follow these instructions and warnings may result in property damage, personal injury or death.

WORK AREA

  • Keep work area clean and well lit.
  • Clean up/contain any fluid spills immediately to prevent slips or falls.
  • Be aware of potential hazards when performing any service or maintenance to the unit.