Revision as of 16:58, 15 December 2023

Looking for a specific replacement part? Ctrl-F (or Command-F for Mac users) brings up your browsers search panel and can search any text on the entire web page. Find parts by searching a part # or part description.

Register your equipment with BHS Optima, BHS's free app.

California Residents: WARNING: This product contains chemicals known to the State of California to cause cancer and/or reproductive harm, and birth defects or other reproductive harm. Learn more here.

Preface

This manual is to be used to service SINGLE LEVEL (BE-SL) as well as DOUBLE STACK (BE-DS) Battery Extractors.

Any views not specifically stated otherwise are of the Single Level Extractor. The parts listed are common for Single Level (BE-SL) and Double Stack (BE-DS) unless otherwise noted in the notes column of the Parts Lists. See Example Below.

ITEM	BHS PART NUMBER	DESCRIPTION	REF. KIT NO.	NOTES	NO. REQ
1	00158001-10	CHAIN-ROLLER-#60		BE-SL ONLY	4
1	00158001-12	CHAIN-ROLLER-#60		BE-DS ONLY	4

For Items or Assemblies that are unique to only the SL or DS, it will be designated as such on the diagram and have a separate, corresponding parts list for that diagram.

When servicing HIGH PERFORMANCE (BE-DS-HP) models, refer to the High Performance Option section for all parts unique to High Performance Units. If a particular part is not found in the High Performance Option section, refer tot the Standard Parts Section(s) of this manual.

TP-606 – Safety & De-Energization Procedures

Operational Safety

Read and understand all instructions and warnings before using or servicing this equipment.
Keep these instructions for future reference.

Battery Extractor (BE) units shall only be operated by suitable persons of at least 18 years of age, who have been trained in the proper and safe operation of the BE and expressly certified/charged, in writing, by the user or their representative.
Only one person is permitted to travel on the BE at any time.
BE units shall only be used indoors in an industrial setting on a hard, nonslip, and level floor without defects including but not limited to holes, gouges, cracks, drains or obstacles comprised of concrete or other suitable industrial material meeting the minimum requirements specified by BHS as well as any local requirements.
A licensed structural engineer should be consulted prior to installing a BE on any building level other than the ground floor.
BE units are not designed to be shipped or transported after initial delivery.
Failure to follow these instructions and warnings may result in property damage, personal injury or death.

Work Area

Keep work area clean and well lit. Cluttered work areas and poor lighting can lead to accidents.
Clean up/contain any fluid spills immediately to prevent slips or falls.
Be aware of potential hazards when performing any service or maintenance to the unit.

Service & Maintenance

Service personnel shall wear Personal Protective Equipment (PPE) appropriate for the task being performed.

Lockout/Tagout

Lockout/tagout the BE per your corporate policy, if damaged or not functioning properly. Lockout/tagout and de-energize all systems prior to performing any maintenance or service to unit.

Lead-Acid Battery Explosion Hazard

DO NOT allow open flames or sparks of any kind near a battery. Highly explosive gas is generated when charging a battery that can remain in battery cells for extended periods of time after charging is complete.

Always wear appropriate PPE including rubber apron, gloves, boots and full face shield when performing service or maintenance to any lead-acid batteries.
DO NOT place metal or other conductive objects on top of battery. Arcing may occur causing damage to the battery and/or serious personal injury or death.
Use only chargers matching the voltage and amperage of the battery being charged. Overcharging a battery can cause damage to the battery, charger and/or serious personal injury or death.
Turn off charger before disconnecting battery from charger. Arcing between battery and charger connectors can cause damage to the connectors and/or serious personal injury or death.

Hydraulic Hazards

AVOID HIGH PRESSURE FLUIDS-Escaping fluid under pressure can penetrate the skin causing serious injury. Relieve pressure before disconnecting hydraulic lines. Tighten all connections before applying pressure. Keep hands and body away from pin holes which eject fluids under high pressure. Use a piece of cardboard or paper to search for leaks. DO NOT use your hand.

Any fluid injected into the skin under high pressure should be considered a serious medical emergency despite an initial normal appearance of the skin. There will be a delayed onset of pain, and serious tissue damage may occur. Medical attention should be sought immediately.

Electromagnet Hazard

Units equipped with magnetic extraction generate strong magnetic fields. Persons with pacemakers SHOULD NOT operate or be in close proximity to equipment during operation.

Failure to comply with this direction could result in serious personal injury or death.

Operational Safety

Only personnel trained in the proper and safe operation of BE units may operate or service the BE.
Operators shall wear appropriate PPE suitable for working with industrial lead-acid batteries while operating the BE (See Lead-Acid Battery Explosion Hazard section).
All data plates, warning labels, placards, etc. shall be in place and legible at all times. Contact BHS for re-placement data plates, warning labels, placards or instructions.
All users and service personnel shall be familiar with the meaning and risks associated with all data plates, warning labels, etc.
All operators and service personnel shall be aware of potential crush and shear points while operating or servicing the BE.
Keep hands and arms inside the operator compartment while operating the BE.
Remove BE from service if damaged, defective, or operating improperly (or becomes such while operating) until repairs can be made to correct any problem(s).
All operators shall be aware of the location of the end stops in the travel path to prevent driving the BE into the end stops.

Do's and Don'ts

DO NOT exceed the maximum capacity of the BE.
DO NOT modify or fit the BE with attachments without prior, written approval from BHS.
DO NOT perform any maintenance or service to the BE with a battery loaded on the BE.
DO NOT allow anyone to ride in or on the BE.
DO NOT operate the BE with any guard or cover removed unless required for maintenance or repair.
Disconnect the BE from all power sources before attempting to perform service or maintenance to the unit.
DO NOT drive the BE into the end stops.
DO NOT operate the BE if disengaged from the guidance track.
DO NOT allow a battery to exit the BE when a lift truck or battery stand is not present to accept the battery.
DO NOT rotate the arm onto a battery such that any part of the extractor arm, vacuum cup or magnet contacts the top of the battery.
DO NOT allow anyone to enter the area under the carriage without the service stands properly installed.
DO NOT use the BE in a manner for which it is not intended. Some examples of prohibited use are but not limited to:
- To transport people
- As a vehicle jack
- To lift loads greater than its rated load capacity
- Where unintentional movement may exist
- Having direct contact with foodstuffs
- In a potentially explosive atmosphere

@@ Line 6: / Line 6: @@
 = <big>Preface</big> =
-<big>This manual is to be used to service '''SINGLE LEVEL (BE-SL)''' as well as '''DOUBLE STACK (BE-DS)''' Battery Extractors.</big>
+This manual is to be used to service '''SINGLE LEVEL (BE-SL)''' as well as '''DOUBLE STACK (BE-DS)''' Battery Extractors.
-<big>Any views not specifically stated otherwise are of the Single Level Extractor. The parts listed are common for Single Level (BE-SL) and Double Stack (BE-DS) unless otherwise noted in the notes column of the Parts Lists. ''See Example Below''.</big>
+Any views not specifically stated otherwise are of the Single Level Extractor. The parts listed are common for Single Level (BE-SL) and Double Stack (BE-DS) unless otherwise noted in the notes column of the Parts Lists. ''See Example Below''.
 {| class="wikitable"
-!<big>ITEM</big>
+!ITEM
-!<big>BHS PART NUMBER</big>
+!BHS PART NUMBER
-!<big>DESCRIPTION</big>
+!DESCRIPTION
-!<big>REF. KIT NO.</big>
+!REF. KIT NO.
-!<big>NOTES</big>
+!NOTES
-!<big>NO. REQ</big>
+!NO. REQ
 |-
-| rowspan="2" |<big>1</big>
+| rowspan="2" |1
-|<big>00158001-10</big>
+|00158001-10
-|<big>CHAIN-ROLLER-#60</big>
+|CHAIN-ROLLER-#60
 |
-|''<big>BE-SL ONLY</big>''
+|''BE-SL ONLY''
-|<big>4</big>
+|4
 |-
-|<big>00158001-12</big>
+|00158001-12
-|<big>CHAIN-ROLLER-#60</big>
+|CHAIN-ROLLER-#60
 |
-|''<big>BE-DS ONLY</big>''
+|''BE-DS ONLY''
-|<big>4</big>
+|4
 |}
-<big>For Items or Assemblies that are unique to only the SL or DS, it will be designated as such on the diagram and have a separate, corresponding parts list for that diagram.</big>
+For Items or Assemblies that are unique to only the SL or DS, it will be designated as such on the diagram and have a separate, corresponding parts list for that diagram.
-<big>When servicing '''HIGH PERFORMANCE (BE-DS-HP)''' models, refer to the [https://tech.bhs1.com/index.php/(BE-SL_%26_-DS)_Single_Level_%26_Double_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-400)?venotify=created#High_Performance_Option High Performance Option] section for all parts unique to High Performance Units. If a particular part is not found in the [https://tech.bhs1.com/index.php/(BE-SL_%26_-DS)_Single_Level_%26_Double_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-400)?venotify=created#High_Performance_Option High Performance Option] section, refer tot the Standard Parts Section(s) of this manual.</big>
+When servicing '''HIGH PERFORMANCE (BE-DS-HP)''' models, refer to the [https://tech.bhs1.com/index.php/(BE-SL_%26_-DS)_Single_Level_%26_Double_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-400)?venotify=created#High_Performance_Option High Performance Option] section for all parts unique to High Performance Units. If a particular part is not found in the [https://tech.bhs1.com/index.php/(BE-SL_%26_-DS)_Single_Level_%26_Double_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-400)?venotify=created#High_Performance_Option High Performance Option] section, refer tot the Standard Parts Section(s) of this manual.
 = <big>TP-606 – Safety & De-Energization Procedures</big> =
@@ Line 51: / Line 51: @@
 * Failure to follow these instructions and warnings may result in property damage, personal injury or death.
-=== <big>Work Area</big> ===
+=== <big><u>Work Area</u></big> ===
 * Keep work area clean and well lit. Cluttered work areas and poor lighting can lead to accidents.
@@ Line 57: / Line 57: @@
 * Be aware of potential hazards when performing any service or maintenance to the unit.
-===<big>Service & Maintenance</big>===
+===<big><u>Service & Maintenance</u></big>===
 Service personnel shall wear Personal Protective Equipment (PPE) appropriate for the task being performed.
 {|
@@ Line 63: / Line 63: @@
 [[File:Danger Warning.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Danger_Warning.png|alt=DANGER]]
 |
-===<big>Lockout/Tagout</big>===
+===<big><u>Lockout/Tagout</u></big>===
 '''Lockout/tagout the BE per your corporate policy, if damaged or not functioning properly. Lockout/tagout and de-energize all systems prior to performing any maintenance or service to unit.'''
 |}
@@ Line 70: / Line 70: @@
 [[File:Danger Warning.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Danger_Warning.png|alt=DANGER]]
 |
-===<big>Lead-Acid Battery Explosion Hazard</big>===
+===<big><u>Lead-Acid Battery Explosion Hazard</u></big>===
 '''DO NOT allow open flames or sparks of any kind near a battery. Highly explosive gas is generated when charging a battery that can remain in battery cells for extended periods of time after charging is complete.'''
 *Always wear appropriate PPE including rubber apron, gloves, boots and full face shield when performing service or maintenance to any lead-acid batteries.
@@ Line 81: / Line 81: @@
 [[File:Warning.png|alt=WARNING|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Warning.png]]
 |
-===<big>Hydraulic Hazards</big>===
+===<big><u>Hydraulic Hazards</u></big>===
 '''AVOID HIGH PRESSURE FLUIDS-Escaping fluid under pressure can penetrate the skin causing serious injury. Relieve pressure before disconnecting hydraulic lines. Tighten all connections before applying pressure. Keep hands and body away from pin holes which eject fluids under high pressure. Use a piece of cardboard or paper to search for leaks. DO NOT use your hand.'''
@@ Line 90: / Line 90: @@
 [[File:Warning.png|alt=WARNING|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Warning.png]]
 |
-===<big>Electromagnet Hazard</big>===
+===<big><u>Electromagnet Hazard</u></big>===
 '''Units equipped with magnetic extraction generate strong magnetic fields. Persons with pacemakers <u>SHOULD</u>''' <u>'''NOT'''</u> '''operate or be in close proximity to equipment during operation.'''
@@ Line 96: / Line 96: @@
 |}
-=== <big>Operational Safety</big> ===
+=== <big><u>Operational Safety</u></big> ===
 * Only personnel trained in the proper and safe operation of BE units may operate or service the BE.
-* Operators shall wear appropriate PPE suitable for working with industrial lead-acid batteries while operating the BE ''(See Lead-Acid Battery Explosion Hazard section).''
+* Operators shall wear appropriate PPE suitable for working with industrial lead-acid batteries while operating the BE ''(See [https://tech.bhs1.com/index.php/(BE-SL_%26_-DS)_Single_Level_%26_Double_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-400)#Lead-Acid_Battery_Explosion_Hazard Lead-Acid Battery Explosion Hazard] section).''
-* All data plates, warning labels, placards, etc shall be in place and legible at all times. Contact BHS for re-placement data plates, warning labels, placards or instructions.
+* All data plates, warning labels, placards, etc. shall be in place and legible at all times. Contact BHS for re-placement data plates, warning labels, placards or instructions.
 * All users and service personnel shall be familiar with the meaning and risks associated with all data plates, warning labels, etc.
 * All operators and service personnel shall be aware of potential crush and shear points while operating or servicing the BE.
@@ Line 106: / Line 106: @@
 * Remove BE from service if damaged, defective, or operating improperly (or becomes such while operating) until repairs can be made to correct any problem(s).
 * All operators shall be aware of the location of the end stops in the travel path to prevent driving the BE into the end stops.
+=== <u><big>Do's and Don'ts</big></u> ===
+* DO NOT exceed the maximum capacity of the BE.
+* DO NOT modify or fit the BE with attachments without prior, written approval from BHS.
+* DO NOT perform any maintenance or service to the BE with a battery loaded on the BE.
+* DO NOT allow anyone to ride in or on the BE.
+* DO NOT operate the BE with any guard or cover removed unless required for maintenance or repair.
+* Disconnect the BE from all power sources before attempting to perform service or maintenance to the unit.
+* DO NOT drive the BE into the end stops.
+* DO NOT operate the BE if disengaged from the guidance track.
+* DO NOT allow a battery to exit the BE when a lift truck or battery stand is not present to accept the battery.
+* DO NOT rotate the arm onto a battery such that any part of the extractor arm, vacuum cup or magnet contacts the top of the battery.
+* DO NOT allow anyone to enter the area under the carriage without the service stands properly installed.
+* DO NOT use the BE in a manner for which it is not intended. Some examples of prohibited use are but not limited to:
+** To transport people
+** As a vehicle jack
+** To lift loads greater than its rated load capacity
+** Where unintentional movement may exist
+** Having direct contact with foodstuffs
+** In a potentially explosive atmosphere
 = Specification Data =

Difference between revisions of "(BE-SL & -DS) Single Level & Double Stack Operator Aboard Battery Extractors – Parts & Service Manual (IOP-400)"

Revision as of 16:58, 15 December 2023

Contents

Preface

TP-606 – Safety & De-Energization Procedures