IOP-265 SRD
Looking for a specific replacement part? Ctrl-F (or Command-F for Mac users) brings up your browsers search panel and can search any text on the entire web page. Find parts by searching a part # or part description.
Register your equipment with BHS Optima, BHS's free app.
California Residents: WARNING: This product contains chemicals known to the State of California to cause cancer and/or reproductive harm, and birth defects or other reproductive harm. Learn more here.
Shipping and Receiving Desk (SRD) Parts & Service Manual
GENERAL INFORMATION
Read & understand this manual before installation, use, and maintenance for your desk. If you have any questions regarding operation, service, or the contents of this manual, please contact your dealer or BHS Technical Support 1.877.BHS.4YOU (1.877.247.4968).
The BHS SRD (Shipping/Receiving Desk) is a fully adjustable packing desk. Heavy duty formed steel frame and formed steel shelves provide a rigid, high capacity desk. Each unit contains (1) fixed lower shelf (500 lb capacity), (1) fixed platform top (500 lb capacity) and (2) adjustable shelves (350 lb capacity each). Platform top cut outs are available in left, right, and ambidextrous to accommodate operator’s handing; a flush platform top is also available. All cutouts and formed edges are outlined in heavy duty vinyl edging to eliminate sharp edges and corners. Included is a drop in scale tray with a cord grommet. Detachable monitor mount and key board tray can be mounted on either left or right hand side with multiple vertical adjustment points. Arms feature two lateral pivot points and tilt function to ergonomically position a screen and keyboard (34” full extension). Formed steel shelves are vertically adjustable in 3” increments, as well as horizontally in 2” increments. Please consult a dealer or sales representative for application specific needs.
MODEL NUMBER & OPTIONS
Available Platform Handing
LH - Left Hand Cutout 2
RH - Right Hand Cutout
FH - Flush Top, No Cutout
AMB - Ambidextrous Cutouts; Left and Right Hand
Available Platform Finish
PC - Powder Coat Platform Top
SST - Stainless Steel Platform Top 2
Standard Features
SRD-KEYBOARD = Detachable, Adjustable Keyboard Tray 2
SRD-MONITOR = Detachable, Adjustable Monitor Mount 2
SRD-LIGHT = Installed 48” Light Fixture, 120V ac 2
Additional Options
SRD-LOGO = Custom Lasered Logo 1
SRD-SUPPLY = Detachable Office Supply Caddy
SRD-SCAN = Detachable Scanner Gun Caddy
SRD-PAPER = Detachable Craft Paper Roll Bar
SRD-LABEL = Detachable Adjustable Label Roll Bar
SRD-POWER = Installed Power Module
SRD-NS = Non-Standard Option1
1 Consult factory for units with NS options as components may be completely unique to the particular unit. 2 Standard, unless otherwise specified.
PRODUCT SPECIFICATIONS
SRD-LH | SRD-RH | SRD-FH | SRD-AMB | |
OVERALL WIDTH | 44" (1118 mm) | 44" (1118 mm) | 44" (1118 mm) | 44" (1118 mm) |
OVERALL LENGTH | 72" (1829 mm) | 72" (1829 mm) | 72" (1829 mm) | 72" (1829 mm) |
OVERALL HEIGHT | 107.125" (2721 mm) | 107.125" (2721 mm) | 107.125" (2721 mm) | 107.125" (2721 mm) |
OVERALL CAPACITY | 2000 lb (907 kg) | 2000 lb (907 kg) | 2000 lb (907 kg) | 2000 lb (907 kg) |
COUNTER WIDTH | 42" (1067 mm) | 42" (1067 mm) | 42" (1067 mm) | 42" (1067 mm) |
COUNTER LENGTH | 72" (1829 mm) | 72" (1829 mm) | 72" (1829 mm) | 72" (1829 mm) |
COUNTER HEIGHT (A.F.F.) | 36" (915 mm) | 36" (915 mm) | 36" (915 mm) | 36" (915 mm) |
COUNTER CAPACITY | 500 lb (227 kg) | 500 lb (227 kg) | 500 lb (227 kg) | 500 lb (227 kg) |
LOWER SHELF WIDTH | 43" (1092 mm) | 43" (1092 mm) | 43" (1092 mm) | 43" (1092 mm) |
LOWER SHELF LENGTH | 65.25" (1658 mm) | 65.25" (1658 mm) | 65.25" (1658 mm) | 65.25" (1658 mm) |
LOWER SHELF HEIGHT (A.F.F.) | 6" (153 mm) | 6" (153 mm) | 6" (153 mm) | 6" (153 mm) |
LOWER SHELF CAPACITY | 500 lb (227 kg) | 500 lb (227 kg) | 500 lb (227 kg) | 500 lb (227 kg) |
UPPER SHELF WIDTH | 18.5" (470 mm) | 18.5" (470 mm) | 18.5" (470 mm) | 18.5" (470 mm) |
UPPER SHELF LENGTH | 64.375" (1635 mm) | 64.375" (1635 mm) | 64.375" (1635 mm) | 64.375" (1635 mm) |
UPPER SHELF CAPACITY | 350 lb (160 kg) | 350 lb (160 kg) | 350 lb (160 kg) | 350 lb (160 kg) |
SCALE CUTOUT WIDTH | (1 ea, LH) 19.188" (488 mm) | (1 ea, RH) 19.188" (488 mm) | NA (NO CUTOUT) | (2ea, LH/RH) 19.188" (488 mm) |
SCALE CUTOUT LENGTH | (1 ea, LH) 19.188" (488 mm) | (1 ea, RH) 19.188" (488 mm) | NA (NO CUTOUT) | (2ea, LH/RH) 19.188" (488 mm) |
SCALE TRAY DEPTH | 5.313" (135 mm) | 5.313" (135 mm) | NA (NOT INCLUDED) | 5.313" (135 mm) |
SCALE TRAY CAPACITY | 200 lb (91 kg) | 200 lb (91 kg) | NA (NOT INCLUDED) | 200 lb (91 kg) |
KEYBOARD TRAY WIDTH | 10" (254 mm) | 10" (254 mm) | 10" (254 mm) | 10" (254 mm) |
KEYBOARD TRAY LENGTH | 24" (610 mm) | 24" (610 mm) | 24" (610 mm) | 24" (610 mm) |
MONITOR MOUNT | 3.94" / 7.87" VESA (100 mm / 200 mm VESA) | 3.94" / 7.87" VESA (100 mm / 200 mm VESA) | 3.94" / 7.87" VESA (100 mm / 200 mm VESA) | 3.94" / 7.87" VESA (100 mm / 200 mm VESA) |
LIGHT FIXTURE WIDTH | 4.5" (114 mm) | 4.5" (114 mm) | 4.5" (114 mm) | 4.5" (114 mm) |
LIGHT FIXTURE LENGTH | 48" (1219 mm) | 48" (1219 mm) | 48" (1219 mm) | 48" (1219 mm) |
LIGHT FIXTURE BALLAST | RAPID START 120V ac | RAPID START 120V ac | RAPID START 120V ac | RAPID START 120V ac |
BULB | T8, n1" (n25.4 mm) 4100K, cool white light | T8, n1" (n25.4 mm) 4100K, cool white light | T8, n1" (n25.4 mm) 4100K, cool white light | T8, n1" (n25.4 mm) 4100K, cool white light |
FRAME
VERTICAL FRAME
ITEM | BHS PART NUMBER | DESCRIPTION | REF. KIT NO. | NOTES | NO. REQ |
1 | 26512005 | ASSEMBLY-SPANNER-LIGHT | PRE-ASSEMBLED | 1 | |
2 | 26517009 | PLATE-SUPPORT-LIGHT | 2 | ||
3 | 26515004 | WELDMENT-UPRIGHT-REAR | 2 | ||
4 | PT0644 | LEVELING MOUNT-1/2-13 x 2” | 2 | ||
5 | 26515006 | WELDMENT-SPANNER-REAR | 1 | ||
6 | 26518006 | SPANNER-POWER MODULE | 1 | ||
7 | HW0404 | BOLT-HHCS-3/8-16 x 1-1/2” | 4 | ||
8 | HW0403 | BOLT-HHCS-3/8-16 x 1-1/4” | 8 | ||
9 | HW0402 | BOLT-HHCS-3/8-16 x 1” | 4 | ||
10 | HW0108 | WASHER-FLAT-3/8-SAE | 32 | ||
11 | HW0006 | NUT-NILN-3/8-16 | 16 |
BASE FRAME
ITEM | BHS PART NUMBER | DESCRIPTION | REF. KIT NO. | NOTES | NO. REQ |
1 | 26512003 | ASSEMBLY-VERTICAL FRAME | SEE SECT. 1.0.2 & 1.0.3 | 1 | |
2 | 26512002 | ASSEMBLY-SUB FRAME | PRE-ASSEMBLED | 1 | |
3 | 26515001 | WELDMENT-SPANNER-SIDE | 4 | ||
4 | 26518003 | PLATE-SHIM-HALF | 2 | ||
5 | 26518002 | PLATE-SHIM | 2 | ||
6 | HW0403 | BOLT-HHCS-3/8-16 x 1-1/4” | 8 | ||
7 | HW0402 | BOLT-HHCS-3/8-16 x 1” | 8 | ||
8 | HW0108 | WASHER-FLAT-3/8-SAE | 16 | ||
9 | HW0006 | NUT-NILN-3/8-16 | 8 |
PLATFORM TOP
LEFT HAND / RIGHT HAND
SRD-LH
ITEM | BHS PART NUMBER | DESCRIPTION | REF. KIT NO. | NOTES | NO. REQ |
1 | 26515022 | WELDMENT-PLATFORM TOP-LEFT | PC - POWDER COAT, OPTION | 1 | |
26515007 | WELDMENT-PLATFORM TOP-LEFT | SST - STAINLESS STEEL | 1 | ||
2 | 26515008 | WELDMENT-SCALE TRAY | 1 | ||
3 | PL0503 | GROMMET-1-1/2” | 1 | ||
4 | HW0302 | BOLT-HHCS-1/4-20 x 3/4” | 10 | ||
5 | HW0104 | WASHER-FLAT-1/4-SAE | 20 | ||
6 | HW0003 | NUT-NILIN-1/4-20 | 10 |
SRD-RH
ITEM | BHS PART NUMBER | DESCRIPTION | REF. KIT NO. | NOTES | NO. REQ |
1 | 26515023 | WELDMENT-PLATFORM TOP-RIGHT | PC - POWDER COAT, OPTION | 1 | |
25015018 | WELDMENT-PLATFORM TOP-RIGHT | SST - STAINLESS STEEL | 1 | ||
2 | 26515008 | WELDMENT-SCALE TRAY | 1 | ||
3 | PL0503 | GROMMET-1-1/2” | 1 | ||
4 | HW0302 | BOLT-HHCS-1/4-20 x 3/4” | 10 | ||
5 | HW0104 | WASHER-FLAT-1/4-SAE | 20 | ||
6 | HW0003 | NUT-NILIN-1/4-20 | 10 |
FLUSH
ITEM | BHS PART NUMBER | DESCRIPTION | REF. KIT NO. | NOTES | NO. REQ |
1 | 26515026 | WELDMENT-PLATFORM TOP-FH | PC - POWDER COAT, OPTION | 1 | |
26515021 | WELDMENT-PLATFORM TOP-FH | SST - STAINLESS STEEL | 1 |
AMBIDEXTROUS
ITEM | BHS PART NUMBER | DESCRIPTION | REF. KIT NO. | NOTES | NO. REQ |
1 | 26515024 | WELDMENT-PLATFORM TOP-AMB | PC - POWDER COAT, OPTION | 1 | |
26515019 | WELDMENT-PLATFORM TOP-AMB | SST - STAINLESS STEEL | 1 | ||
2 | 26515025 | WELDMENT-COVER PLATE | PC - POWDER COAT, OPTION | 1 | |
26515020 | WELDMENT-COVER PLATE | SST - STAINLESS STEEL | 1 | ||
3 | 26515008 | WELDMENT-SCALE TRAY | 1 | ||
4 | PL0501 | GROMMET-1/2” | 1 | ||
5 | PL0503 | GROMMET-1-1/2” | 1 | ||
6 | HW0302 | BOLT-HHCS-1/4-20 x 3/4” | 16 | ||
7 | HW0104 | WASHER-FLAT-1/4-SAE | 32 | ||
8 | HW0003 | NUT-NILIN-1/4-20 | 16 |
INSTALLATION AND ASSEMBLY
ITEM | BHS PART NUMBER | DESCRIPTION | REF. KIT NO. | NOTES | NO. REQ |
1 | VARIES | ASSEMBLY-PLATFORM TOP | SEE MODEL NUMBER | 1 | |
2 | 26515009 | WELDMENT-SUPPORT | 1 | ||
3 | HW0403 | BOLT-HHCS-3/8-16 x 1-1/4” | 9 | ||
4 | HW0402 | BOLT-HHCS-3/8-16 x 1” | 6 | ||
5 | HW0108 | WASHER-FLAT-3/8-SAE | 30 | ||
6 | HW0006 | NUT-NILN-3/8-16 | 15 |
SHELVES
LOWER SHELF
ITEM | BHS PART NUMBER | DESCRIPTION | REF. KIT NO. | NOTES | NO. REQ |
1 | 26515010 | WELDMENT-LOWER SHELF | 1 | ||
2 | HW0402 | BOLT-HHCS-3/8-16 x 1” | 8 | ||
3 | HW0108 | WASHER-FLAT-3/8-SAE | 16 | ||
4 | HW0006 | NUT-NILN-3/8-16 | 8 |
UPPER SHELVES
ITEM | BHS PART NUMBER | DESCRIPTION | REF. KIT NO. | NOTES | NO. REQ |
1 | 26515011 | WELDMENT-SHELF-UPPER | 2 | ||
2 | 26517029-3 | GUSSET-SHELF-LHS | 2 | ||
3 | 26517029-4 | GUSSET-SHELF-RHS | 2 | ||
4 | 26517048 | PLATE-END-LHS | BHS LOGO | 2 | |
26517050 | PLATE-END-LHS | BLANK, NO LOGO | 2 | ||
5 | 26517049 | PLATE-END-RHS | BHS LOGO | 2 | |
26517051 | PLATE-END-RHS | BLANK, NO LOGO | 2 | ||
6 | 26517032 | PLATE-DIVIDER | 6 | ||
7 | 26518015 | SHAFT-STOP | 2 | ||
8 | HW0302 | BOLT-HHCS-1/4-20 x 3/4” | 4 | ||
9 | HW0003 | NUT-NILN-1/4-20 | 4 | ||
10 | HW0402 | BOLT-HHCS-3/8-16 x 1” | 8 | ||
11 | HW0431 | BOLT-CARRIAGE-3/8-16 x 1-1/4” | 16 | ||
12 | HW0108 | WASHER-FLAT-3/8-SAE | 32 | ||
13 | HW0006 | NUT-NILN-3/8-16 | 24 |
MOUNTING ARMS
KEYBOARD TRAY
ITEM | BHS PART NUMBER | DESCRIPTION | REF. KIT NO. | NOTES | NO. REQ |
1 | 26512007 | ASSEMBLY-KEYBOARD TRAY | PRE-ASSEMBLED | 1 | |
2 | HW0431 | BOLT-CARRIAGE-3/8-16 x 1-1/4” | 2 | ||
3 | HW0108 | WASHER-FLAT-3/8-SAE | 2 | ||
4 | HW0006 | NUT-NILN-3/8-16 | 2 |
MONITOR MOUNT
ITEM | BHS PART NUMBER | DESCRIPTION | REF. KIT NO. | NOTES | NO. REQ |
1 | 26512008 | ASSEMBLY-MONITOR MOUNT | PRE-ASSEMBLED † | 1 | |
2 | HW0431 | BOLT-CARRIAGE-3/8-16 x 1-1/4” | 2 | ||
3 | HW0108 | WASHER-FLAT-3/8-SAE | 2 | ||
4 | HW0006 | NUT-NILN-3/8-16 | 2 | ||
† NOTE: MONITOR ATTACHMENT HARDWARE NOT INCLUDED. | |||||
STANDARD AVAILABLE OPTIONS
SRD-SUPPLY
ITEM | BHS PART NUMBER | DESCRIPTION | REF. KIT NO. | NOTES | NO. REQ |
1 | 26515013 | WELDMENT-SUPPLY CADDY | 1 | ||
2 | HW0403 | BOLT-HHCS-3/8-16 x 1-1/4” | 4 | ||
3 | HW0108 | WASHER-FLAT-3/8-SAE | 8 | ||
4 | HW0006 | NUT-NILN-3/8-16 | 4 |
SRD-SCAN
ITEM | BHS PART NUMBER | DESCRIPTION | REF. KIT NO. | NOTES | NO. REQ |
1 | 26515012 | WELDMENT-SCANNER CADDY | 1 | ||
2 | HW0402 | BOLT-HHCS-3/8-16 x 1” | 2 | ||
3 | HW0107 | WASHER-LOCK-3/8-SAE | 2 |
SRD-PAPER
ITEM | BHS PART NUMBER | DESCRIPTION | REF. KIT NO. | NOTES | NO. REQ |
1 | 26517033-3 | PLATE-MOUNT-PAPER ROLL | 1 | ||
2 | 26517033-4 | PLATE-MOUNT-PAPER ROLL | 1 | ||
3 | 26517034 | PLATE-STOP-LABEL | 2 | ||
4 | HW0402 | BOLT-HHCS-3/8-16 x 1” | 1 | ||
5 | HW0431 | BOLT-CARRIAGE-3/8-16 x 1-1/4” | 2 | ||
6 | HW0108 | WASHER-FLAT-3/8-SAE | 2 | ||
7 | HW0006 | NUT-NILN-3/8-16 | 3 |
SRD-LABEL
ITEM | BHS PART NUMBER | DESCRIPTION | REF. KIT NO. | NOTES | NO. REQ |
1 | 26517036 | SPANNER-LABEL ROLL | 1 | ||
2 | 26517035 | BRAKCET-LABEL ROLL | 2 | ||
3 | HW0302 | BOLT-HHCS-1/4-20 x 3/4” | 2 | ||
4 | HW0104 | WASHER-FLAT-1/4-SAE | 4 | ||
5 | HW0003 | NUT-NILN-1/4-20 | 2 |
SRD-POWER
ITEM | BHS PART NUMBER | DESCRIPTION | REF. KIT NO. | NOTES | NO. REQ |
1 | E0672 | POWER MODULE-6 RECPT | 1 |
STATEMENT OF WARRANTY
Statement of Warranty
Click here for details on BHS' Statement of Warranty.