https://tech.bhs1.com/api.php?action=feedcontributions&feedformat=atom&user=Kperrier 2026-08-04T01:37:49Z User contributions MediaWiki 1.37.1 https://tech.bhs1.com/index.php?title=IOSM-240_BLB&diff=7682 2024-10-01T20:55:51Z

<p>Kperrier: /* LOAD CAPACITY STATEMENT MODEL BLB-6000 BATTERY LIFTING BEAM AND BUILT TO STANDARDS */ Fixed ASME</p> <hr /> <div><br /> <br /> '''Looking for a specific replacement part?''' Ctrl-F (or Command-F for Mac users) brings up your browsers search panel and can search any text on the entire web page. Find parts by searching a part # or part description.<br /> <br /> '''Register your equipment with [https://na.bhs1.com/media-library/bhs-optima/ BHS Optima], BHS's free app.'''<br /> <br /> '''California Residents''': WARNING: This product contains chemicals known to the State of California to cause cancer and/or reproductive harm, and birth defects or other reproductive harm. [https://na.bhs1.com/about-bhs/compliance-statement-for-california-proposition-65/ Learn more here.]<br /> <br /> == Battery Lifting Beam (BLB) System Parts &amp; Service Manual ==<br /> ===SAFETY ===<br /> [[File:IOSM-240-BLB-(03-06-07)-2.jpg|700px|border]]<br /> <br /> <br /> === GENERAL SAFETY PRACTICES WHEN HANDLING SUSPENDED LOADS ===<br /> [[File:IOSM-240-BLB-(03-06-07)-3.jpg|500px|right]]<br /> '''GENERAL SAFETY PRACTICES WHEN HANDLING SUSPENDED LOADS'''<br /> <br /> &lt;ol&gt;<br /> <br /> &lt;li&gt;Always lock your elbow and stay at least an arm's length away from the load.&lt;/li&gt;<br /> &lt;li&gt;Position hand at rear of lifting beam to help guide battery.&lt;/li&gt;<br /> &lt;li&gt;Never use your body or limbs to stop a swinging load.&lt;/li&gt;<br /> &lt;li&gt;Be sure feet are not under the battery and are out of the primary danger zone.&lt;/li&gt;<br /> &lt;li&gt;The operator, as required by your company's safety policy and/or O.S.H.A, '''SHALL''' wear the proper safety equipment.&lt;/li&gt;<br /> &lt;li&gt;All lifting apparatus '''SHALL''' be inspected at the beginning of each shift to ensure no damage or defects are present that could pose a safety hazard.&lt;/li&gt;<br /> &lt;li&gt;Areas of travel '''SHALL''' be clear of any trip hazards and obstacles.&lt;/li&gt;<br /> &lt;li&gt;Only trained and authorized personnel '''SHALL''' operate overhead lifting equipment and this battery below-the- hook device.&lt;/li&gt;<br /> &lt;li&gt;The operator '''SHALL''' verity that any load slings or below-the-hook devices are properly secured to the load prior to lifting or moving the load.&lt;/li&gt;<br /> &lt;li&gt;No other persons '''SHALL''' be in the work area or travel path of the load or empty below-the-hook device.&lt;/li&gt;<br /> &lt;li&gt;The operator '''SHALL NOT''' place hands or fingers on hooks.&lt;/li&gt;<br /> &lt;li&gt;The operator '''SHALL NOT''' tilt the below-the-hook device causing the hooks to hang outside the lines of the below-the-hook device.&lt;/li&gt;<br /> &lt;/ol&gt;<br /> <br /> === BATTERY LIFTING BEAM DAILY INSPECTION ===<br /> [[File:IOSM-240-BLB-(03-06-07)-4.jpg|700px|border]]<br /> <br /> '''BATTERY LIFTING BEAM DAILY INSPECTION'''<br /> <br /> Inspections are to be performed: &quot; At the beginning of each shift and/or before first use.&quot; Using a lifting device that is worn or damaged can cause loss of load and possible per­sonal injury or death.<br /> <br /> 1. Inspect the wood laminate load members for any cracks, splits, indentions, or delamination.<br /> <br /> 2. Inspect hook adjusting trunnions for wear or damage.<br /> <br /> 3. Inspect load pins on battery lift hooks for wear or damage.<br /> <br /> 4. Inspect battery hook engaging throat for excessive wear or damage.<br /> <br /> * Minimum throat height - 5/8&quot; at center of throat.<br /> <br /> 5. Inspect lift &quot;A&quot; plate for excessive wear.<br /> <br /> &lt;li&gt;Minimum height - 3/4&quot; at engagement point to hoist.<br /> &lt;/li&gt;<br /> <br /> '''If any of the above conditions do not meet wear and/or dimensional specifications, this device should be removed from service and replaced immediately.'''<br /> <br /> === PROPER HOOK ENGAGEMENT OPERATION ===<br /> '''PROPER HOOK ENGAGEMENT OPERATION'''<br /> <br /> Lower the lifting beam horizontally until the hooks are slightly above the battery eyelets.<br /> <br /> Push the beam forward a few inches to allow the hook farthest from you to pass the outside edge of the battery eyelet.<br /> <br /> Lower the beam until the hook inserts into the eyelet.<br /> <br /> Push down slightly on the heal of the beam closest to you and lower it until the hook can be inserted into the battery eyelet closest to you.<br /> <br /> Lift the beam slightly to engage the hooks complete­ly in the eyelets of the battery.<br /> <br /> Insure both hooks are fully engaged in the battery eyelet.<br /> <br /> Continue to lift and move battery.<br /> <br /> === PROPER HOOK POSITION FOR THE BHS BLB-6000 BATTERY LIFTING BEAM ===<br /> [[File:IOSM-240-BLB-(03-06-07)-6.jpg|500px|none]]<br /> '''PROPER HOOK POSITION FOR THE BHS BLB-6000 BATTERY LIFTING BEAM'''<br /> '''BASIC OPERATION NOTES'''<br /> <br /> Make sure hooks are fully engaged in battery lifting eyelet prior to lifting the battery. Hooks '''SHALL''' be fully inserted into the battery holes as shown in Figure #1<br /> <br /> Hooks '''SHALL''' be spaced equally around the center line of the below-the-hook device and be properly placed in the scalloped adjusting trunnions. Correct positioning of the hooks will allow the battery to be level when lifted.<br /> <br /> Hooks '''SHALL''' be hanging in a vertical position as shown in Figure #1. Do not allow hooks to be tilted inward or outward as in Figures #2 and #3.<br /> <br /> === PRIMARY DANGER ZONES FOR OPERATORS USING BLB-6000 LIFTING BEAM AND GANTRY CRANE ===<br /> [[File:IOSM-240-BLB-(03-06-07)-7.jpg|700px|border]]<br /> <br /> === BLB-6000 ===<br /> [[File:IOSM-240-BLB-(03-06-07)-4.jpg|700px|border]]<br /> <br /> '''BLB-6000'''<br /> <br /> &lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;<br /> <br /> <br /> &lt;table style=&quot;border-collapse:collapse;margin-left:92.8407pt&quot; cellspacing=&quot;0&quot;&gt;&lt;tr style=&quot;height:19pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s128&quot; style=&quot;padding-left: 2pt;text-indent: 0pt;line-height: 11pt;text-align: left;&quot;&gt;I&lt;span style=&quot; color: #1F2020;&quot;&gt;t&lt;/span&gt;e&lt;span style=&quot; color: #1F2020;&quot;&gt;m&lt;/span&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s128&quot; style=&quot;padding-left: 28pt;text-indent: 0pt;line-height: 11pt;text-align: left;&quot;&gt;P&lt;span style=&quot; color: #1F2020;&quot;&gt;Part No.&lt;/span&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s129&quot; style=&quot;padding-left: 26pt;text-indent: 0pt;text-align: left;&quot;&gt;Description&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s128&quot; style=&quot;padding-right: 2pt;text-indent: 0pt;text-align: right;&quot;&gt;Q&lt;span style=&quot; color: #1F2020;&quot;&gt;ty&lt;/span&gt;&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:20pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s130&quot; style=&quot;padding-top: 6pt;padding-left: 7pt;text-indent: 0pt;text-align: left;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-top: 6pt;padding-left: 28pt;text-indent: 0pt;text-align: left;&quot;&gt;24016003&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-top: 7pt;padding-left: 26pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;Wood BLB-6000 Beam&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-top: 8pt;padding-right: 5pt;text-indent: 0pt;line-height: 11pt;text-align: right;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:13pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 8pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 28pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;24015001&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 26pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;Hook Standard&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-right: 5pt;text-indent: 0pt;line-height: 11pt;text-align: right;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:13pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 8pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;3&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 28pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;240&lt;span style=&quot; color: #010101;&quot;&gt;1&lt;/span&gt;6001&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 26pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;Lift Plate - &lt;span style=&quot; color: #333;&quot;&gt;Hook&lt;/span&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-right: 5pt;text-indent: 0pt;line-height: 11pt;text-align: right;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:14pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 8pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;4&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 28pt;text-indent: 0pt;text-align: left;&quot;&gt;240&lt;span style=&quot; color: #010101;&quot;&gt;1&lt;/span&gt;7002&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 26pt;text-indent: 0pt;text-align: left;&quot;&gt;P&lt;span style=&quot; color: #010101;&quot;&gt;l&lt;/span&gt;ate Spanner&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-right: 5pt;text-indent: 0pt;text-align: right;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:15pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 8pt;text-indent: 0pt;text-align: left;&quot;&gt;5&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-top: 1pt;padding-left: 28pt;text-indent: 0pt;text-align: left;&quot;&gt;240&lt;span style=&quot; color: #010101;&quot;&gt;1&lt;/span&gt;7005&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-top: 1pt;padding-left: 26pt;text-indent: 0pt;text-align: left;&quot;&gt;Spacer &lt;span style=&quot; color: #333;&quot;&gt;- &lt;/span&gt;Block&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-top: 1pt;padding-right: 5pt;text-indent: 0pt;text-align: right;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:14pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 8pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;6&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-top: 1pt;padding-left: 28pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;24096001&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s130&quot; style=&quot;padding-top: 1pt;padding-left: 26pt;text-indent: 0pt;line-height: 11pt;text-align: left;&quot;&gt;Trunnion &lt;span style=&quot; color: #1F2020;&quot;&gt;- Aluminum&lt;/span&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-top: 1pt;padding-right: 5pt;text-indent: 0pt;line-height: 11pt;text-align: right;&quot;&gt;4&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:14pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 8pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;7&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 28pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;LB0080&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 26pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;Pin - Spring 1/4&quot; x &lt;span style=&quot; color: #333;&quot;&gt;1 1/2&quot;&lt;/span&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-top: 1pt;padding-right: 5pt;text-indent: 0pt;line-height: 11pt;text-align: right;&quot;&gt;8&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:14pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 8pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;8&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 28pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;LB0060&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 26pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;Straps - Tie&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-right: 5pt;text-indent: 0pt;line-height: 11pt;text-align: right;&quot;&gt;4&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:14pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 8pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;9&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s130&quot; style=&quot;padding-left: 28pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;LB0090&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 26pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;Bol&lt;span style=&quot; color: #010101;&quot;&gt;t &lt;/span&gt;1/2 x 5 NCGR5&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-top: 1pt;padding-right: 5pt;text-indent: 0pt;line-height: 11pt;text-align: right;&quot;&gt;5&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:13pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 2pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;10&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 28pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;HW0111&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 26pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;Washer 1/2 Flat &lt;span style=&quot; color: #333;&quot;&gt;- &lt;/span&gt;Zinc&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s133&quot; style=&quot;padding-right: 5pt;text-indent: 0pt;line-height: 11pt;text-align: right;&quot;&gt;10&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:14pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 2pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;11&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s130&quot; style=&quot;padding-left: 28pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;LB0100&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 26pt;text-indent: 0pt;line-height: 11pt;text-align: left;&quot;&gt;Nut- Lock &lt;span style=&quot; color: #333;&quot;&gt;- &lt;/span&gt;Cone 1/2&quot; x 13&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-right: 5pt;text-indent: 0pt;line-height: 11pt;text-align: right;&quot;&gt;5&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:14pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 2pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;12&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 27pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;00196411&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 26pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;Label Danger - &lt;span style=&quot; color: #333;&quot;&gt;Insure &lt;/span&gt;Engagement&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-top: 1pt;padding-right: 5pt;text-indent: 0pt;line-height: 11pt;text-align: right;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:13pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 2pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;13&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 27pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;00196703&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 26pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;Label &lt;span style=&quot; color: #333;&quot;&gt;- &lt;/span&gt;Capacity 6000 Lbs.&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-right: 5pt;text-indent: 0pt;line-height: 11pt;text-align: right;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:14pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 2pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;14&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 28pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;LB0070&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 26pt;text-indent: 0pt;line-height: 11pt;text-align: left;&quot;&gt;Screw Wood &lt;span style=&quot; color: #333;&quot;&gt;#10 &lt;/span&gt;x 2 &lt;span style=&quot; color: #333;&quot;&gt;FHWS&lt;/span&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-right: 6pt;text-indent: 0pt;line-height: 11pt;text-align: right;&quot;&gt;12&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:14pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 2pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;15&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 28pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;LB0130&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 26pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;Tag Serial &lt;span class=&quot;s134&quot;&gt;# &lt;/span&gt;&lt;span class=&quot;s135&quot;&gt;- &lt;/span&gt;BLB-6000&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-top: 1pt;padding-right: 6pt;text-indent: 0pt;line-height: 11pt;text-align: right;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:13pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 2pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;16&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 28pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;LB-Inspection La&lt;span style=&quot; color: #010101;&quot;&gt;b&lt;/span&gt;el&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 26pt;text-indent: 0pt;line-height: 11pt;text-align: left;&quot;&gt;Label - Caution - &lt;span style=&quot; color: #333;&quot;&gt;Inspection - &lt;/span&gt;BLB-6000&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-right: 6pt;text-indent: 0pt;line-height: 11pt;text-align: right;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:14pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 2pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;17&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 27pt;text-indent: 0pt;text-align: left;&quot;&gt;00196213&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 26pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;Warning Label&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s130&quot; style=&quot;padding-right: 6pt;text-indent: 0pt;line-height: 12pt;text-align: right;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:13pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s128&quot; style=&quot;padding-left: 27pt;text-indent: 0pt;line-height: 11pt;text-align: left;&quot;&gt;SP-2400&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s129&quot; style=&quot;padding-left: 26pt;text-indent: 0pt;line-height: 11pt;text-align: left;&quot;&gt;Parts &amp; Service Instructions&lt;/span&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s136&quot; style=&quot;padding-right: 5pt;text-indent: 0pt;line-height: 11pt;text-align: right;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;/table&gt;<br /> <br /> === LOAD CAPACITY STATEMENT MODEL BLB-6000 BATTERY LIFTING BEAM AND BUILT TO STANDARDS ===<br /> <br /> '''LOAD CAPACITY STATEMENT MODEL BLB-6OOO'''<br /> <br /> '''BATTERY LIFTING BEAM'''<br /> <br /> The battery lifting beam model number BLB-6000 has a stat­ed load capacity of 6000# (six thousand). It is designed and tested to meet or exceed any governing rules and regulations pertaining to sufficient factors of safety as well as safety fea­tures when used according to its original intent.<br /> <br /> Any misuse, abuse or modification to said unit voids all fac­tory warranties. As with any lifting device, units should be visually inspected before each use for any signs of damage or wear.<br /> <br /> '''Built To Standards''' <br /> <br /> The BLB-6000 was designed and built to current industry and government standards and guidelines. For more infor­mation see the following.<br /> &lt;ul&gt;<br /> &lt;li&gt;American Society of Mechanical Engineers (ASME) B30.20&lt;/li&gt;<br /> &lt;li&gt;American Society of Mechanical Engineers (ASME) B30.20&lt;/li&gt;<br /> &lt;li&gt;Occupational Safety and Health ACT (OSHA) (Standards 29 CFR)&lt;/li&gt;<br /> &lt;/ul&gt;<br /> <br /> ==STATEMENT OF WARRANTY==<br /> <br /> '''Statement of Warranty'''<br /> <br /> [https://store.bhs1.com/warranty Click here] for details on BHS' Statement of Warranty.</div>

Kperrier https://tech.bhs1.com/index.php?title=IOP-146_PGC-PDC&diff=7681 2024-10-01T20:50:20Z

<p>Kperrier: Changed &quot;OSHA&quot; to &quot;ASME&quot; in the DO's and DON'Ts sections</p> <hr /> <div>'''Looking for a specific replacement part?''' Ctrl-F (or Command-F for Mac users) brings up your browsers search panel and can search any text on the entire web page. Find parts by searching a part # or part description.<br /> <br /> '''Register your equipment with [https://na.bhs1.com/media-library/bhs-optima/ BHS Optima], BHS's free app.'''<br /> <br /> '''California Residents''': WARNING: This product contains chemicals known to the State of California to cause cancer and/or reproductive harm, and birth defects or other reproductive harm. [https://na.bhs1.com/about-bhs/compliance-statement-for-california-proposition-65/ Learn more here.]<br /> <br /> == Power Drive Gantry Crane (PGC-PDC) Parts &amp; Service Manual ==<br /> TP-603 - SAFETY AND DE-ENERGIZATION PROCEDURES<br /> === GENERAL SAFETY ===<br /> *Read and understand all instructions and warnings before using or servicing this equipment.<br /> <br /> *Keep these instructions for future reference.<br /> <br /> *For the purpose of this document, Portable Gantry Crane (PGC) will refer to the gantry structure as well as the hoist, functioning as one unit. <br /> <br /> *Refer to the hoist manufacturer’s operating and maintenance instructions for proper operation and service procedures before operating or performing any service or maintenance to the PGC. <br /> <br /> *PGC units shall only be used to handle industrial lead-acid batteries using a manufacturer approved battery lifting attachment. <br /> <br /> *PGC units shall only be used indoors in an industrial setting on a hard, nonslip, and level floor without defects including but not limited to: holes, gouges, cracks, drains or obstacles.<br /> <br /> *A licensed structural engineer should be consulted prior to installing a PGC on any building level other than the ground floor. <br /> <br /> *PGC units are not designed to be shipped or transported after initial delivery.<br /> <br /> *PGC units that do not travel on a designated guidance track should be maneuvered by two operators - one at each end of the PGC. <br /> <br /> *Perform system and safety check before operating.<br /> <br /> *Failure to follow these instructions and warnings may result in property damage, personal injury or death.<br /> <br /> ====WORK AREA====<br /> *Keep work area clean and well lit. Cluttered work areas and poor lighting can lead to accidents.<br /> *Clean up/contain any fluid spills immediately to prevent slips or falls.<br /> *Be aware of potential hazards when performing any service or maintenance to the unit.<br /> <br /> ====SERVICE &amp; MAINTENANCE====<br /> <br /> Service personnel shall wear Personal Protective Equipment (PPE) appropriate for the task being performed.<br /> <br /> ====LOCKOUT/TAGOUT====<br /> <br /> Lockout/tagout the PGC per your corporate policy, if PGC is damaged or not functioning properly. Lockout/tagout and de-energize all systems prior to performing any maintenance or service to PGC.<br /> <br /> ====LEAD-ACID BATTERIES-EXPLOSION HAZARD====<br /> <br /> [[File:Warning bhs sign (2).JPG]]<br /> <br /> '''Do not allow open flames or sparks of any kind near a battery. Highly explosive gas is generated when charging a battery that can remain in battery cells for extended periods of time after charging is complete.'''<br /> <br /> *Always wear appropriate PPE including rubber apron, gloves, boots and full face shield when performing service or maintenance to any lead-acid batteries. <br /> *Do not place metal or other conductive objects on top of battery. Arcing may occur causing damage to the battery and/or serious personal injury or death.<br /> <br /> *Use only chargers matching the voltage and amperage of the battery being charged. Overcharging a battery can cause damage to the battery, charger and/or serious personal injury or death. <br /> *Turn off charger before disconnecting battery from charger. Arcing between battery and charger connectors can cause damage to the connectors and/or serious personal injury or death.<br /> <br /> === OPERATIONAL SAFETY ===<br /> ====OPERATIONAL SAFETY ====<br /> *Only personnel trained in the proper and safe operation of PGC units may operate or service the PGC. <br /> <br /> *Operators shall wear appropriate PPE suitable for working with industrial lead-acid batteries while operating the PGC (see prior page).<br /> <br /> *All data plates, warning labels, placards, etc. shall be in place and legible at all times. Contact BHS for replacement data plates, warning labels, placards or instructions.<br /> <br /> *All users and service personnel shall be familiar with the meaning and risks associated with all data plates, warning labels, etc. <br /> <br /> *All operators and service personnel shall be aware of potential crush and shear points while operating or servicing the PGC. <br /> <br /> *PGC shall be operated in an area with ambient light levels of at least 50 lux.<br /> <br /> *Keep at least a straight arms length distance from battery while transporting a battery. <br /> <br /> *Avoid abrupt changes in direction when transporting a battery on the PGC to prevent loss of the battery and/ or loss of control of the PGC unit. <br /> <br /> *Watch for personnel, batteries, charger cables or other obstructions in the PGC travel path.<br /> <br /> *Remove the PGC from service if the PGC or hoist is damaged, defective, or operating improperly (or becomes such while operating) until repairs can be made to correct any problem(s).<br /> <br /> ====DO’s AND DON’T’s====<br /> *'''DO NOT''' exceed the maximum capacity of lowest rated component of a PGC unit. <br /> <br /> *'''DO NOT''' modify or fit the PGC with attachments without prior, written approval from BHS. <br /> <br /> * '''DO NOT''' perform any maintenance or service to the PGC with a battery loaded on the PGC. <br /> <br /> *'''DO NOT''' use the PGC to lift, support or transport people. <br /> <br /> *'''DO NOT''' operate the PGC with any guard or cover removed unless required for maintenance or repair. <br /> <br /> *'''DO NOT''' operate the PGC with the electrical enclosure door open. Keep door latches secure. <br /> <br /> *'''DO NOT''' change any program parameter on the Variable Frequency Drive (VFD). <br /> <br /> *Use only BHS, Inc. programmed replacement Electronic Programming Modules (EPM’s). <br /> <br /> *'''DO NOT''' run the PGC into the end stops. <br /> <br /> *'''DO NOT''' try to push or maneuver a battery while in motion. <br /> <br /> *'''DO NOT''' use your body weight to guide battery in or out of position. <br /> <br /> *'''DO NOT''' operate the PGC if disengaged from the guidance track. <br /> <br /> *'''DO NOT''' propel the PGC, battery and/or lifting device into equipment or personnel. <br /> <br /> *Ensure the lift truck mast clears the lowest point of the PGC prior to driving the truck into the designated battery changing area. <br /> <br /> *'''DO NOT''' use the PGC in a manner for which it is not intended. Some examples of prohibited use are but not limited to: <br /> <br /> :*As a vehicle jack<br /> :*To lift loads greater than its rated load capacity<br /> :*Where unintentional movement may exist<br /> :*Having direct contact with foodstuffs<br /> <br /> *Always travel with the battery as low as possible.<br /> <br /> *'''DO NOT''' use PGC with a twisted, kinked, damaged or worn load chain. <br /> <br /> *'''DO NOT''' lift batteries over people. <br /> <br /> *'''DO NOT''' step under a suspended battery.<br /> <br /> *'''DO NOT''' operate PGC unless all persons are (and remain) clear of the suspended battery and moving gantry structure travel path.<br /> <br /> *'''DO NOT''' operate PGC unless battery is centered under the hoist. <br /> <br /> *'''DO NOT''' attempt to lengthen the load chain or repair a damaged load chain.<br /> <br /> *Protect the PGC’s load chain from weld splatter* or other damaging contaminants. <br /> <br /> *'''DO NOT''' use the load chain as a sling or wrap the load chain around a battery.<br /> <br /> *'''DO NOT''' lift a battery unless the load chain is properly seated in the hoist’s chain wheel(s) or sprocket(s). <br /> <br /> *'''DO NOT''' operate PGC beyond the limits of the load chain travel.<br /> <br /> *'''DO NOT''' leave a battery suspended by the PGC unattended unless specific precautions have been taken.<br /> <br /> *'''DO NOT''' allow the load chain or hook to be used as an electrical or welding ground*.<br /> <br /> *'''DO NOT''' allow the load chain to be touched by a live welding electrode*. <br /> <br /> *'''DO NOT''' operate PGC unless the approved battery lifting attachment is properly sized, properly seated in the load hook saddle and the load hook latch is closed.<br /> <br /> *Lift battery carefully. Make sure battery is balanced, lifting device is properly engaged, and load holding action is secure before continuing. <br /> <br /> *Ensure hoist limit switches function properly.<br /> <br /> *Warn personnel of an approaching PGC or battery.<br /> <br /> *Maintain a firm footing or be otherwise secure when operating the PGC.<br /> <br /> *Check the hoist brake function by tensioning the hoist prior to each lift operation. <br /> <br /> *Ensure there are no obstacles in the travel path that could present a trip hazard prior to operating the PGC.<br /> <br /> *Ensure the hook latch is closed and not supporting any part of the battery lifting attachment. <br /> <br /> *Ensure the battery is free to move and will clear all obstructions.<br /> <br /> *Avoid swinging the battery, lifting device and/or load hook.<br /> <br /> *Inspect the PGC regularly. Replace damaged or worn parts and keep appropriate records of service and maintenance. <br /> <br /> *Use only manufacturer’s recommended parts when repairing the PGC. <br /> <br /> *'''DO NOT''' use the hoist load limiting or warning device to measure a battery weight. <br /> <br /> *'''DO NOT''' use the limit switches as routine operating stops unless expressly authorized by the manufacturer. Limit switches are emergency devices only. <br /> <br /> *'''DO NOT''' allow your attention to be diverted from operating the PGC.<br /> <br /> '''*NEVER''' weld inside a battery room. See LEAD-ACID BATTERIES-EXPLOSION HAZARD.<br /> <br /> ===LIFTING DEVICE SAFETY ===<br /> [[File:IOP-146 PGC-PDC (03-26-10)TP-605(4).jpg|700px|border]]<br /> <br /> ====DO’s AND DON’T’s====<br /> *Always maneuver the battery at a straight arm’s length with your hand at the end of the beam. <br /> <br /> *'''DO NOT''' place hands or fingers on or near hooks when handling a battery. <br /> <br /> *Inspect the lifting device for damage or wear prior to each use and keep appropriate records of service and maintenance. <br /> <br /> *Ensure the battery lifting device is properly seated in the load hook saddle and the load hook latch is closed. <br /> <br /> *Ensure the battery lifting device hooks are properly engaged prior to lifting a battery. <br /> <br /> *Ensure the battery lifting device is (and remains) level at all times when handling a battery. <br /> <br /> *'''DO NOT''' leave the battery lifting device attached to the load hook when not in use. (See ASME regulation B30.20-203.)<br /> <br /> &lt;u&gt;CORRECT&lt;/u&gt; '''HAND PLACEMENT FOR MANEUVERING A MOTIONLESS BATTERY''' <br /> <br /> NOTE: When maneuvering a battery, the operator is within the “PRIMARY DANGER ZONE” and should use extreme caution. <br /> <br /> [[File:IOP-146 PGC-PDC (03-26-10) 5 1.JPG|300px]]<br /> <br /> '''INCORRECT HAND PLACEMENT FOR MANEUVERING A BATTERY'''<br /> <br /> [[File:IOP-146 PGC-PDC (03-26-10) 5 2.JPG|500px]]<br /> <br /> === DE-ENERGIZATION===<br /> &lt;ol&gt;<br /> &lt;li&gt;To de-energize components external to the electrical enclosure, turn the disconnect switch on the enclosure to the “OFF” position. See Figure 1.&lt;/li&gt;<br /> [[File:Warning bhs sign (1).JPG]]<br /> <br /> '''Failure to disconnect electrical power to the PGC could result in electrical shock.''' <br /> <br /> [[File:IOP-146 PGC-PDC (03-26-10) Page 09 Image 0002.jpg|300px|none|caption]]<br /> FIGURE 1<br /> <br /> &lt;li&gt;To de-energize the entire PGC, including the electrical enclosure, disconnect power to the PGC or shut off the electrical branch circuit breaker.<br /> &lt;/li&gt;<br /> [[File:Warning bhs sign (1).JPG]]<br /> <br /> '''Failure to disconnect electrical power to the PGC could result in electrical shock.''' <br /> <br /> &lt;li&gt;Wait 3 minutes before performing any service to the unit to allow the capacitors in the motor drive circuit to fully discharge.&lt;/li&gt;<br /> <br /> [[File:Warning bhs sign (1).JPG]]<br /> <br /> '''Failure to wait 3 minutes to allow capacitors to fully discharge could result in electrical shock. ''' <br /> &lt;/ol&gt;<br /> <br /> ==GENERAL INFORMATION ==<br /> === SPECIFICATIONS===<br /> <br /> &lt;p class=&quot;s22&quot; style=&quot;padding-top: 5pt;padding-bottom: 2pt;padding-left: 0;text-indent: 0pt;text-align: left;&quot;&gt;'''PGC-PDC Specifications - Imperial / Metric'''&lt;/p&gt;<br /> <br /> &lt;table style=&quot;border-collapse:collapse;margin-left:0;&quot; cellspacing=&quot;0&quot;&gt;&lt;tr style=&quot;height:15pt&quot;&gt;&lt;td style=&quot;width:103pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 17pt;text-indent: 0pt;text-align: left;&quot;&gt;PGC-10PDC&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 17pt;text-indent: 0pt;text-align: left;&quot;&gt;PGC-12PDC&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 17pt;text-indent: 0pt;text-align: left;&quot;&gt;PGC-14PDC&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 17pt;text-indent: 0pt;text-align: left;&quot;&gt;PGC-16PDC&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 17pt;text-indent: 0pt;text-align: left;&quot;&gt;PGC-18PDC&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 17pt;text-indent: 0pt;text-align: left;&quot;&gt;PGC-20PDC&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:15pt&quot;&gt;&lt;td style=&quot;width:103pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;Capacity&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;4,000 lbs / 1814 kg&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;4,000 lbs / 1814 kg&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;4,000 lbs / 1814 kg&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;4,000 lbs / 1814 kg&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;4,000 lbs / 1814 kg&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;4,000 lbs / 1814 kg&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:15pt&quot;&gt;&lt;td style=&quot;width:103pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;Clear Between “A” Frame&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;10’ / 3050 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;12’ / 3660 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;14’ / 4270 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;16’ / 4880 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;18’/ 5490 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;20’ / 6100 mm&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:15pt&quot;&gt;&lt;td style=&quot;width:103pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;Overall Beam Length&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;12’ / 3660 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;14’ / 4270 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;16’ / 4880 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;18’ / 5490 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;20’ / 6100 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;22’ / 6710 mm&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:15pt&quot;&gt;&lt;td style=&quot;width:103pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;Overall Length Dimension&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;12’ 9” / 3890 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;14’ 9” / 4500 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;16’ 9” / 5110 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;18’ 9” / 5720 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;20’ 9” / 6320 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;22’ 9” / 6930 mm&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:15pt&quot;&gt;&lt;td style=&quot;width:103pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;Overall System Length &lt;span class=&quot;s24&quot;&gt;1&lt;/span&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;14’ / 4270 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;16’ / 4880 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;18’ / 5490 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;20’ / 6100 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;22’ / 6710 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;24’ / 7320 mm&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:15pt&quot;&gt;&lt;td style=&quot;width:103pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;Nominal Track / Wheel Distance &lt;span class=&quot;s24&quot;&gt;2&lt;/span&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;11 ’5” / 3480 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;13’ 5” / 4090 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;15’ 5” / 4700 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;17’ 5” / 5310 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;19’ 5” / 5920 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;21 ’5” / 6530 mm&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:15pt&quot;&gt;&lt;td style=&quot;width:103pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;Overall Height &lt;span class=&quot;s24&quot;&gt;3&lt;/span&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;11’ 1” / 3380 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;11’ 1” / 3380 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;11’ 3” / 3430 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;11’ 3” / 3430 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;11’ 5” / 3480 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;11’ 5” / 3480 mm&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:24pt&quot;&gt;&lt;td style=&quot;width:103pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 7pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;I-Beam Size&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;8” x 23# /&lt;/p&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;203.2 mm x 10.43 kg&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;8” x 23# /&lt;/p&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;203.2 mm x 10.43 kg&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;10” x 25.4# /&lt;/p&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;254.0 mm x 11.52 kg&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;10” x 25.4# /&lt;/p&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;254.0 mm x 11.52 kg&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;12” x 31.8# /&lt;/p&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;304.8 mm x 14.42 kg&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;12” x 31.8# /&lt;/p&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;304.8 mm x 14.42 kg&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:15pt&quot;&gt;&lt;td style=&quot;width:103pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;Weight&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;1,260 lbs / 571.53 kg&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;1,285 lbs / 582.87 kg&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;1,320 lbs / 598.74 kg&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;1,345 lbs / 610.08 kg&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;1,425 lbs / 646.37 kg&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;1,490 lbs / 678.85 kg&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:15pt&quot;&gt;&lt;td style=&quot;width:103pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;Under Beam Clearance Height&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;10’ 5” / 3170 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;10’ 5” / 3170 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;10’ 5” / 3170 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;10’ 5” / 3170 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;10’ 5” / 3170 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;10’ 5” / 3170 mm&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:24pt&quot;&gt;&lt;td style=&quot;width:103pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;padding-right: 1pt;text-indent: 0pt;text-align: left;&quot;&gt;Under Chain Container Clearance Height&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 7pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;8’ 5” / 2570 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 7pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;8’ 5” / 2570 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 7pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;8’ 5” / 2570 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 7pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;8’ 5” / 2570 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 7pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;8’ 5” / 2570 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 7pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;8’ 5” / 2570 mm&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:24pt&quot;&gt;&lt;td style=&quot;width:103pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;padding-right: 11pt;text-indent: 0pt;text-align: left;&quot;&gt;Max A.C. Amp Draw with Hoist at 480V / 3Ph / 60Hz&lt;span class=&quot;s24&quot;&gt;4&lt;/span&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 7pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;5.2 Amp&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 7pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;5.2 Amp&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 7pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;5.2 Amp&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 7pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;5.2 Amp&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 7pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;5.2 Amp&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 7pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;5.2 Amp&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:15pt&quot;&gt;&lt;td style=&quot;width:103pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;Travel Speed&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;45 FPM / .2286 MPS&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;45 FPM / .2286 MPS&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;45 FPM / .2286 MPS&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;45 FPM / .2286 MPS&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;45 FPM / .2286 MPS&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;45 FPM / .2286 MPS&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:15pt&quot;&gt;&lt;td style=&quot;width:103pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;A-Frame Base Width&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;68” / 1727.20 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;68” / 1727.20 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;68” / 1727.20 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;68” / 1727.20 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;68” / 1727.20 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 3pt;text-indent: 0pt;text-align: left;&quot;&gt;68” / 1727.20 mm&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;/table&gt;<br /> <br /> &lt;p class=&quot;s22&quot; style=&quot;padding-left: 0;text-indent: 0pt;text-align: left;&quot;&gt;'''3PGC-PDC Specifications - Imperial / Metric'''&lt;/p&gt;<br /> <br /> &lt;table style=&quot;border-collapse:collapse;margin-left:0;&quot; cellspacing=&quot;0&quot;&gt;&lt;tr style=&quot;height:15pt&quot;&gt;&lt;td style=&quot;width:103pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 15pt;text-indent: 0pt;text-align: left;&quot;&gt;3PGC-10PDC&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 15pt;text-indent: 0pt;text-align: left;&quot;&gt;3PGC-12PDC&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 15pt;text-indent: 0pt;text-align: left;&quot;&gt;3PGC-14PDC&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 15pt;text-indent: 0pt;text-align: left;&quot;&gt;3PGC-16PDC&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 15pt;text-indent: 0pt;text-align: left;&quot;&gt;3PGC-18PDC&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 15pt;text-indent: 0pt;text-align: left;&quot;&gt;3PGC-20PDC&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:24pt&quot;&gt;&lt;td style=&quot;width:103pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 7pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;Capacity&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;6,000 lbs /&lt;/p&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-left: 5pt;text-indent: 0pt;text-align: left;&quot;&gt;2721.55 kg&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;6,000 lbs /&lt;/p&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;2721.55 kg&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;6,000 lbs /&lt;/p&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;2721.55 kg&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;6,000 lbs /&lt;/p&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;2721.55 kg&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;6,000 lbs /&lt;/p&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;2721.55 kg&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;6,000 lbs /&lt;/p&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;2721.55 kg&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:15pt&quot;&gt;&lt;td style=&quot;width:103pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;Clear Between “A” Frame&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;10’ / 3050 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;12’ / 3660 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;14’ / 4270 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;16’ / 4880 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;18’ / 5490 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;20’ / 6100 mm&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:15pt&quot;&gt;&lt;td style=&quot;width:103pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;Overall Beam Length&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;12’ / 3660 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;14’ / 4270 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;16’ / 4880 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;18’ / 5490 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;20’ / 6100 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;22’ / 6710 mm&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:15pt&quot;&gt;&lt;td style=&quot;width:103pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;Overall Length Dimension&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;12’ 9” / 3890 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;14’ 9” / 4500 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;16’ 9” / 5110 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;18’ 9” / 5720 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;20’ 9” / 6320 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;22’ 9” / 6930 mm&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:15pt&quot;&gt;&lt;td style=&quot;width:103pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;Overall System Length &lt;span class=&quot;s24&quot;&gt;1&lt;/span&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;14’ / 4270 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;16’ / 4880 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;18’ / 5490 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;20’ / 6100 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;22’ / 6710 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;24’ / 7320 mm&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:15pt&quot;&gt;&lt;td style=&quot;width:103pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;Nominal Track / Wheel Distance &lt;span class=&quot;s24&quot;&gt;2&lt;/span&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;11’ 5” / 3480 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;13’ 5” / 4090 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;15’ 5” / 4700 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;17’ 5” / 5310 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;19’ 5” / 5920 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;21’ 5” / 6530 mm&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:15pt&quot;&gt;&lt;td style=&quot;width:103pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;Overall Height &lt;span class=&quot;s24&quot;&gt;3&lt;/span&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;11’ 1” / 3380 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;11’ 1” / 3380 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;11’ 3” / 3430 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;11’ 3” / 3430 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;11’ 5” / 3480 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;11’ 5” / 3480 mm&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:24pt&quot;&gt;&lt;td style=&quot;width:103pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 7pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;I-Beam Size&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;8” x 23# /&lt;/p&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;203.2 mm x 10.43 kg&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;10” x 25.4# /&lt;/p&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;254.0 mm x 11.52 kg&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;10” x 25.4# /&lt;/p&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;254.0 mm x 11.52 kg&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;12” x 31.8# /&lt;/p&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;304.8 mm x 14.42 kg&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;15” x 42.9# /&lt;/p&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;381.0 mm x 19.46 kg&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;15” x 42.9# /&lt;/p&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;381.0 mm x 19.46 kg&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:15pt&quot;&gt;&lt;td style=&quot;width:103pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;Weight&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;1,260 lbs / 571.53 kg&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;1,320 lbs / 598.74 kg&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;1,370 lbs / 621.42 kg&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;1,455 lbs / 659.98 kg&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;1,511 lbs / 685.38 kg&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;1,627 lbs / 737.99 kg&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:15pt&quot;&gt;&lt;td style=&quot;width:103pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;Under Beam Clearance Height&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;10’ 5” / 3170 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;10’ 5” / 3170 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;10’ 5” / 3170 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;10’ 5” / 3170 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;10’ 5” / 3170 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;10’ 5” / 3170 mm&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:24pt&quot;&gt;&lt;td style=&quot;width:103pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;padding-right: 1pt;text-indent: 0pt;text-align: left;&quot;&gt;Under Chain Container Clearance Height&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 7pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;8’ 5” / 2570 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 7pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;8’ 5” / 2570 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 7pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;8’ 5” / 2570 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 7pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;8’ 5” / 2570 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 7pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;8’ 5” / 2570 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 7pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;8’ 5” / 2570 mm&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:24pt&quot;&gt;&lt;td style=&quot;width:103pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;padding-right: 12pt;text-indent: 0pt;text-align: left;&quot;&gt;Max A.C. Amp Draw with Hoist at 480V / 3Ph / 60Hz&lt;span class=&quot;s24&quot;&gt;4&lt;/span&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 7pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;6.8 Amp&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 7pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;6.8 Amp&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 7pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;6.8 Amp&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 7pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;6.8 Amp&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 7pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;6.8 Amp&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 7pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;6.8 Amp&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:15pt&quot;&gt;&lt;td style=&quot;width:103pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;Travel Speed&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;45 FPM / .2286 MPS&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;45 FPM / .2286 MPS&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;45 FPM / .2286 MPS&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;45 FPM / .2286 MPS&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;45 FPM / .2286 MPS&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;45 FPM / .2286 MPS&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:15pt&quot;&gt;&lt;td style=&quot;width:103pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;A-Frame Base Width&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;68” / 1727.20 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;68” / 1727.20 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;68” / 1727.20 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;68” / 1727.20 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:71pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;68” / 1727.20 mm&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:70pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;text-indent: 0pt;text-align: left;&quot;&gt;68” / 1727.20 mm&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;/table&gt;<br /> <br /> === INSTALLATION ===<br /> <br /> The Powered Gantry System you have purchased was tested and left the factory in top condition. Inspect unit for any freight damages before starting installation.<br /> <br /> Your unit has been pre-assembled and pre-wired for your convenience. The following steps should be followed to ensure proper and safe operation. Area of installation should be cleared and uncluttered so a forklift and personnel can safely work in the area.<br /> <br /> 1) Lay &quot;I&quot; beam on floor in direction it is to be used. Remove &quot;A&quot; frame legs from shipping tees and locate which side of system control box will be mounted to and put that leg on the appropriate side. Gussets of &quot;A&quot; frames should point inward toward each other. <br /> <br /> 2) Install the 1/2&quot; bolts through beam mounting pad and into legs. Lightly snug bolts - do not tighten at this point. <br /> <br /> 3) After bolts are in place, make sure legs are perpendicular to floor and parallel to each other. To accomplish this, measure the distance from center-to-center of wheels on top and bottom of &quot;A&quot; frames. Then cross square by measuring diagonally from wheel center to wheel center. Cross square dimensions should be within 1/4&quot; of each other. <br /> <br /> 4) After unit is in a squared position, tighten up the beam mounting bolts and recheck squareness. Beam bolts should be torqued to approximately 75 - 90 lb/ft <br /> <br /> 5) While unit is still lying down, use beam clamps supplied to route cable for #2 drive motor assembly across top flange of beam. Cable ties or electrical tape should be used to attach cable up side of &quot;A&quot; frames so as not to have any hang points. <br /> <br /> 6) Unit can now be stood upright by positioning forklift under center of &quot;I&quot; beam and slowly raising. The assistance of one or two men on each leg is advisable to keep the unit stabilized and counteract any over swinging which could damage wheel assemblies.<br /> <br /> 7) Mark location of one side of track by using a chalk line to keep marks straight. Layout one section at a time and visually inspect to make certain each piece is straight. Minor bows can be adjusted by anchoring each end then forcing in bowed area and anchoring. (6 - 3/8&quot; concrete anchors are supplied for each 10' section of track.<br /> <br /> 8) There are two ways the second track (if required) can be installed.<br /> <br /> '''OPTION #1:'''<br /> <br /> Measure center-to-center on wheels of gantry, then position second track 1/8&quot; - 1/4&quot; wider than this dimension to allow for beam and leg deflection while under load.<br /> <br /> '''OPTION #2:''' <br /> <br /> Wait until hoist and trolley are mounted and &quot;A&quot; frame wiring is connected, then pick up approximately 1/2 of maximum load being handled and then anchor the outboard track as system is powered down the track at 5' intervals.<br /> <br /> ''NOTE: Refer to hoist manual for proper set-up and adjustment procedures.<br /> ''<br /> [[File:IOP-146 PGC-PDC (03-26-10)page 12.jpg|700px|none|border]]<br /> <br /> [[File:IOP-146 PGC-PDC (03-26-10)page13.jpg|700px|none|border]]<br /> <br /> === OPERATION ===<br /> '''Read and understand all instructions and warnings, including TP-605 - Safety and De-energization Procedures, prior to operating this equipment.'''<br /> <br /> The following instructions will guide you through the basic steps necessary to operate and change batteries with a PGC-PDC equipped with a BHS model BLB-6000 lifting beam. <br /> <br /> ''NOTE: Deviation from the following procedure may be required due to variation of particular battery room design and/or layout.''<br /> &lt;ol&gt;<br /> <br /> &lt;li&gt;If not already in place, position industrial truck (pallet or lift truck) which requires a battery change in the appropriate staging area.&lt;/li&gt;<br /> &lt;li&gt;Disconnect the battery leads and remove any battery restraints. Refer to the lift truck manual for proper procedure.<br /> &lt;/li&gt;<br /> &lt;li&gt;Position the hoist to the side (horizontally on the beam) on which the battery is to be extracted from the lift truck.&lt;/li&gt;<br /> &lt;li&gt;Move the PGC into position over the lift truck, aligning the hoist lift chain with the slot in the overhead guard of the lift truck.<br /> &lt;/li&gt;<br /> &lt;li&gt;Position the lifting beam in the direction the battery will be removed (typically parallel with the battery) and adjust the height to allow the lifting beam to be positioned over the battery.&lt;/li&gt;<br /> &lt;li&gt;Lower the lifting beam and engage the lifting beam hooks into the battery lifting eyes.<br /> &lt;/li&gt;<br /> <br /> [[File:Notice sign.jpg]]<br /> &lt;br&gt;<br /> '''Refer to the lifting attachment manual for proper hook engagement and operating procedures.''' <br /> <br /> &lt;li&gt;Ensure both hooks are fully engaged in the battery lifting eyes and carefully lift the battery a sufficient distance to clear any structure of the lift truck battery compartment. Observe the clearance of the hoist block and overhead guard.&lt;/li&gt;<br /> <br /> [[File:Notice sign.jpg]]<br /> &lt;br&gt;<br /> '''DO NOT allow the hook block to come in contact with the overhead guard. Damage to the hook block and or overhead guard may occur.''' <br /> &lt;li&gt;Move the battery out of the battery compartment until completely clear of the lift truck.&lt;/li&gt;<br /> <br /> [[File:Warning bhs sign (1).JPG]]<br /> &lt;br&gt;<br /> '''DO NOT place hands or fingers on or near hooks when handling a battery. A sudden unexpected shift of the battery or lifting beam could crush or sever hands and fingers. Refer to Safety and De-energization Procedures TP-605 for proper handling of a BHS lifting beam and battery.'''<br /> <br /> &lt;li&gt;Move the PGC to an open position on the battery stands and align the battery with the open slot ensuring sufficient clearance on both sides of the battery.&lt;/li&gt;<br /> <br /> &lt;li&gt;Adjust the height of the battery sufficient to clear the 11. battery stand deck.&lt;/li&gt;<br /> <br /> &lt;li&gt;Move the battery completely into the open position while observing the clearance of the lifting beam and hook block with battery stand charger shelf.&lt;/li&gt;<br /> <br /> [[File:Notice sign.jpg]]<br /> &lt;br&gt;<br /> '''DO NOT allow the hook block to come in contact with the overhead guard. Damage to the hook block and or overhead guard may occur.''' <br /> <br /> &lt;li&gt;Lower the battery onto the battery stand deck until the lifting beam hooks disengage from the battery lifting eyes.&lt;/li&gt;<br /> <br /> ''NOTE: It may be necessary to manually disconnect the lifting hooks if the lifting beam is equipped with locking-style hooks.''<br /> <br /> &lt;li&gt;Maneuver the lifting beam as required by lifting and turning the beam so the hooks are clear of any batteries and battery/charger cables. Ensure the lifting beam and/or hook block is clear of the charger shelf and any battery/charger cables.&lt;/li&gt;<br /> <br /> [[File:Notice sign.jpg]]<br /> &lt;br&gt;<br /> '''DO NOT allow the lifting beam or hook block to come in contact with or become entangled with the charger shelf or battery/charger cables. Damage to the lifting beam, charger shelf, and battery/chargers may occur.''' <br /> <br /> &lt;li&gt;Move the lifting beam away from the battery.&lt;/li&gt;<br /> <br /> &lt;li&gt;Move the PGC into position with the charged battery to be installed into the lift truck and disconnect the battery from the charger.&lt;/li&gt;<br /> <br /> [[File:Warning bhs sign (1).JPG]]<br /> &lt;br&gt;<br /> '''ALWAYS be sure charging has been completed and charger is not still charging battery. Dangerous sparking/arcing can occur if battery is unplugged from charger while charging.'''<br /> &lt;li&gt;The above process can be used to remove a charged battery from the battery stand and install it into the lift truck.&lt;/li&gt;<br /> <br /> [[File:Notice sign.jpg]]<br /> &lt;br&gt;<br /> '''DO NOT drive the PGC into the travel path end stops. The end stops are designed to prevent the PGC from accidentally traveling beyond its designated travel path. Driving the PGC into the end stops could cause damage to the end stop and/or the PGC.'''<br /> &lt;br&gt;<br /> [[File:Warning bhs sign (2).JPG]]<br /> &lt;br&gt;<br /> '''Driving the PGC into the end stops with a battery suspended form the hoist will cause the battery to swing which could cause the battery to fall. Serious personal injury or death may occur.'''<br /> <br /> === MANUAL UNLOADING===<br /> '''Lockout/tagout and de-energize all equipment prior to manually unloading any battery.'''<br /> <br /> In the event of power loss or an operational malfunction of the PGC and/or hoist not allowing a battery to be unloaded using normal operating procedures, it is recommended to unload the battery from the hoist using a lift truck.<br /> <br /> #If accessible, use a lift truck of sufficient capacity along with a pallet to carefully lift the battery such that the lifting device can be disconnected from the battery. If the battery is too low to allow a pallet to be placed under it, lift the battery directly by the lift truck forks.<br /> <br /> #Lower the battery for safe travel and slowly transport the battery out of the immediate area so repairs can be made<br /> <br /> Should the status of the PGC/hoist not permit access to or not allow for safe, manual unloading, only repairs required to safely maneuver the PGC/hoist to a position allowing for safe unloading should be made. Once the battery is safely unloaded, any remaining repairs can be made.<br /> <br /> [[File:Warning bhs sign (2).JPG]]<br /> <br /> '''Extreme care should be taken when working around a suspended load as well as equipment suspending a load. Unexpected movement of the equipment could cause the load and/or equipment to shift, possibly causing the load to fall. Serious personal injury or death may occur.''' <br /> <br /> === MAINTENANCE===<br /> Every effort has been made in design and manufacturing of this unit to make it as trouble free and low maintenance as possible. The gear boxes are lifetime lubricated and require no service. The following are a few steps to be taken on a regular basis dependent upon environment and application. A good starting point is every 60 days then adjust your schedule as conditions require.<br /> <br /> #Check all bolts on wheels, drive motor mounts and I-Beam for tightness. #Check drive wheels chains for proper tension and lubricate with light machine oil or spray chain lubricant. <br /> #Hoist lift chain should be wiped with a towel saturated with light machine oil. <br /> #The two drive wheels and two idler casters are equipped with grease fittings. A sufficient amount of grease should be pumped into grease fittings until grease just starts coming out of axle washers inside of forks. <br /> #Inspect lift chain for excessive wear, damaged or twisted links. #Inspect gear boxes for leakage.<br /> <br /> ===GANTRY CRANE SERIES PLANNED MAINTENANCE INSPECTION REPORT===<br /> [[File:IOP-146 PGC-PDC (03-26-10)D2.jpg|700px|border]]<br /> <br /> === SPARE PARTS===<br /> <br /> The following items are recommended by the factory to have on hand for PGC-PDC models to minimize any downtime due to minor breakdown that may occur under normal operating conditions.<br /> <br /> &lt;table style=&quot;border-collapse:collapse;margin-left:0;&quot; cellspacing=&quot;0&quot;&gt;&lt;tr style=&quot;height:25pt&quot;&gt;&lt;td style=&quot;width:72pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s180&quot; style=&quot;padding-left: 14pt;text-indent: -3pt;line-height: 12pt;text-align: left;&quot;&gt;BHS PART NUMBER&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:216pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s180&quot; style=&quot;padding-top: 7pt;padding-left: 72pt;padding-right: 71pt;text-indent: 0pt;text-align: center;&quot;&gt;DESCRIPTION&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:50pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s180&quot; style=&quot;padding-top: 7pt;padding-left: 13pt;padding-right: 12pt;text-indent: 0pt;text-align: center;&quot;&gt;QTY&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:72pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s180&quot; style=&quot;padding-left: 13pt;padding-right: 3pt;text-indent: -8pt;line-height: 12pt;text-align: left;&quot;&gt;REFERENCE SECTION&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:99pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s180&quot; style=&quot;padding-top: 7pt;padding-left: 5pt;padding-right: 4pt;text-indent: 0pt;text-align: center;&quot;&gt;NOTES&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:14pt&quot;&gt;&lt;td style=&quot;width:72pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s181&quot; style=&quot;padding-top: 1pt;padding-left: 12pt;padding-right: 11pt;text-indent: 0pt;text-align: center;&quot;&gt;HW0306&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:216pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s181&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;BOLT-FHSCS-1/4-20 X 1&quot;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:50pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s181&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;8&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:72pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s181&quot; style=&quot;padding-left: 23pt;padding-right: 22pt;text-indent: 0pt;text-align: center;&quot;&gt;2.0.1&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:99pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:15pt&quot;&gt;&lt;td style=&quot;width:72pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s181&quot; style=&quot;padding-top: 1pt;padding-left: 12pt;padding-right: 11pt;text-indent: 0pt;text-align: center;&quot;&gt;14024010&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:216pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s181&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;SPROCKET-36T&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:50pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s181&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:72pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s181&quot; style=&quot;padding-top: 1pt;padding-left: 23pt;padding-right: 22pt;text-indent: 0pt;text-align: center;&quot;&gt;2.0.1&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:99pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:15pt&quot;&gt;&lt;td style=&quot;width:72pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s181&quot; style=&quot;padding-top: 1pt;padding-left: 12pt;padding-right: 11pt;text-indent: 0pt;text-align: center;&quot;&gt;14026007&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:216pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s181&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;WHEEL-POLY- MODIFIED&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:50pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s181&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:72pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:2pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:2pt;border-right-color:#231F20&quot; rowspan=&quot;2&quot;&gt;&lt;p class=&quot;s181&quot; style=&quot;padding-top: 9pt;padding-left: 23pt;padding-right: 22pt;text-indent: 0pt;text-align: center;&quot;&gt;2.0.1&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:99pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:2pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot; rowspan=&quot;2&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 7pt;padding-left: 30pt;text-indent: -21pt;text-align: left;&quot;&gt;VERIFY TYPE PRIOR TO ORDERING&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:15pt&quot;&gt;&lt;td style=&quot;width:72pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s181&quot; style=&quot;padding-top: 1pt;padding-left: 12pt;padding-right: 11pt;text-indent: 0pt;text-align: center;&quot;&gt;14026006&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:216pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s181&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;WHEEL-V-GROOVE-MODIFED&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:50pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s181&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:15pt&quot;&gt;&lt;td style=&quot;width:72pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s181&quot; style=&quot;padding-top: 1pt;padding-left: 12pt;padding-right: 11pt;text-indent: 0pt;text-align: center;&quot;&gt;E1219&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:216pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s181&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;FUSE&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:50pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s181&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:72pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot; rowspan=&quot;4&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;p class=&quot;s181&quot; style=&quot;padding-left: 23pt;padding-right: 22pt;text-indent: 0pt;text-align: center;&quot;&gt;3.0.1&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:99pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 3pt;padding-left: 5pt;padding-right: 4pt;text-indent: 0pt;text-align: center;&quot;&gt;0.8A (ALL UNITS)&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:15pt&quot;&gt;&lt;td style=&quot;width:72pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s181&quot; style=&quot;padding-top: 1pt;padding-left: 12pt;padding-right: 11pt;text-indent: 0pt;text-align: center;&quot;&gt;E0340&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:216pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s181&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;FUSE&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:50pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s181&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;3&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:99pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 3pt;padding-left: 5pt;padding-right: 4pt;text-indent: 0pt;text-align: center;&quot;&gt;10A (208/240/480V UNITS)&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:15pt&quot;&gt;&lt;td style=&quot;width:72pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s181&quot; style=&quot;padding-top: 1pt;padding-left: 12pt;padding-right: 11pt;text-indent: 0pt;text-align: center;&quot;&gt;E0339&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:216pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s181&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;FUSE&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:50pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s181&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;3&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:99pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 3pt;padding-left: 5pt;padding-right: 4pt;text-indent: 0pt;text-align: center;&quot;&gt;12A (ALL UNITS)&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:15pt&quot;&gt;&lt;td style=&quot;width:72pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s181&quot; style=&quot;padding-top: 1pt;padding-left: 12pt;padding-right: 11pt;text-indent: 0pt;text-align: center;&quot;&gt;X350004&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:216pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s181&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;FUSE&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:50pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s181&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;3&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:99pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 3pt;padding-left: 5pt;padding-right: 4pt;text-indent: 0pt;text-align: center;&quot;&gt;12A (575V UNITS)&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;/table&gt;<br /> <br /> Use only BHS approved replacement parts.<br /> <br /> BHS recommends that a full maintenance inspection report similar to the one provided be done at least once a month.<br /> <br /> Any parts found to be excessively worn or damaged should promptly be replaced unless said parts pose a safety risk to the operator and/or extractor, in which case the unit should be removed from service until the problem(s) are remedied (See Operator’s Daily Checklist.)<br /> <br /> === GANTRY CRANE SERIES PLANNED MAINTENANCE INSPECTION REPORT ===<br /> [[File:IOP-146 PGC-PDC (03-26-10)page20.jpg|700px|border]]<br /> <br /> === TROUBLE SHOOTING ===<br /> <br /> [[File:IOP-146 PGC-PDC (03-26-10)E1.jpg|700px|border]]<br /> <br /> ==PARTS SECTIONS ==<br /> <br /> === CHASSIS ===<br /> <br /> ====I-BEAM &amp; LEGS====<br /> [[File:IOP-146 PGC-PDC (03-26-10)1.0.1.jpg|700px|border]]<br /> <br /> &lt;table style=&quot;border-collapse:collapse;margin-left:0;&quot; cellspacing=&quot;0&quot;&gt;&lt;tr style=&quot;height:24pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s202&quot; style=&quot;padding-top: 7pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;ITEM&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:73pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s202&quot; style=&quot;padding-top: 2pt;padding-left: 19pt;text-indent: -2pt;text-align: left;&quot;&gt;BHS PART NUMBER&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s202&quot; style=&quot;padding-top: 7pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;DESCRIPTION&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s202&quot; style=&quot;padding-top: 7pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;NOTES&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s202&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;padding-right: 2pt;text-indent: 1pt;text-align: left;&quot;&gt;NO. REQ&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:11pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot; rowspan=&quot;6&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;p class=&quot;s23&quot; style=&quot;text-indent: 0pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:73pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-left: 9pt;text-indent: 0pt;line-height: 9pt;text-align: left;&quot;&gt;PGC-BEAM-10&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-left: 9pt;text-indent: 0pt;line-height: 9pt;text-align: left;&quot;&gt;I-BEAM-12’ X 8”-23#-6 HOLE&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;2-TON&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;text-indent: 0pt;line-height: 9pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:73pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;PGC-BEAM-12&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;I-BEAM-14’ X 8”-23#-6 HOLE&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;2-TON&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:73pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;PGC-BEAM-14&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;I-BEAM-16’ X 10”-25.4#-6 HOLE&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;2-TON&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:73pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;PGC-BEAM-16&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;I-BEAM-18’ X 10”-25.4#-6 HOLE&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;2-TON&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:73pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;PGC-BEAM-18&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;I-BEAM-20’ X 12”-31.8#-6 HOLE&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;2-TON&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:73pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;PGC-BEAM-20&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;I-BEAM-22’ X 12&quot;-31.8#-8 HOLE&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;2-TON&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:73pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;HW0504&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;BOLT-HHCS-1/2-13 X 2&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 5pt;padding-right: 4pt;text-indent: 0pt;text-align: center;&quot;&gt;12&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;3&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:73pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;HW0111&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;WASHER-FLAT-1/2-SAE&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 5pt;padding-right: 4pt;text-indent: 0pt;text-align: center;&quot;&gt;24&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;4&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:73pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;HW0110&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;WASHER-LOCK-1/2&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 5pt;padding-right: 4pt;text-indent: 0pt;text-align: center;&quot;&gt;12&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;5&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:73pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;HW0007&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;NUT-HEX-1/2-13&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 5pt;padding-right: 4pt;text-indent: 0pt;text-align: center;&quot;&gt;12&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;6&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:73pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;14015001&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;2-TON LEG FRAME&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;PANEL SIDE&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;7&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:73pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;14015002&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;2-TON LEG FRAME&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;NON-PANEL SIDE&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot; rowspan=&quot;4&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;p class=&quot;s23&quot; style=&quot;text-indent: 0pt;text-align: center;&quot;&gt;8&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:73pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;3PGC-BEAM-12&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;I-BEAM-14’ X 10”-25.4#-8 HOLE&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;3-TON&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:73pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;3PGC-BEAM-14&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;I-BEAM-16’ X 10”-25.4#-8 HOLE&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;3-TON&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:73pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;3PGC-BEAM-16&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;I-BEAM-18’ X 12”-31.8#-8 HOLE&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;3-TON&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:73pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;3PGC-BEAM-18&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;I-BEAM-20' X 15”-42.9#-8 HOLE&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;3-TON&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;9&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:73pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;HW0504&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;BOLT-HHCS-1/2-13 X 2&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 5pt;padding-right: 4pt;text-indent: 0pt;text-align: center;&quot;&gt;16&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;10&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:73pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;HW0111&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;WASHER-FLAT-1/2-SAE&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 5pt;padding-right: 4pt;text-indent: 0pt;text-align: center;&quot;&gt;32&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;11&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:73pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;HW0110&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;WASHER-LOCK-1/2&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 5pt;padding-right: 4pt;text-indent: 0pt;text-align: center;&quot;&gt;16&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;12&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:73pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;HW0007&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;NUT-HEX-1/2-13&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 5pt;padding-right: 4pt;text-indent: 0pt;text-align: center;&quot;&gt;16&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;13&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:73pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;15015001&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;3-TON LEG FRAME&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;PANEL SIDE&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;14&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:73pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;15015002&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;3-TON LEG FRAME&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;NON-PANEL SIDE&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;/table&gt;<br /> <br /> === DRIVE &amp; IDLER WHEELS ===<br /> <br /> ====DRIVE WHEELS====<br /> [[File:IOP-146 PGC-PDC (03-26-10)2.0.1.jpg|700px|border]]<br /> <br /> &lt;table style=&quot;border-collapse:collapse;margin-left:0;&quot; cellspacing=&quot;0&quot;&gt;&lt;tr style=&quot;height:24pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s202&quot; style=&quot;padding-top: 7pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;ITEM&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s202&quot; style=&quot;padding-top: 2pt;padding-left: 16pt;text-indent: -2pt;text-align: left;&quot;&gt;BHS PART NUMBER&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s202&quot; style=&quot;padding-top: 7pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;DESCRIPTION&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s202&quot; style=&quot;padding-top: 7pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;NOTES&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s202&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;padding-right: 2pt;text-indent: 1pt;text-align: left;&quot;&gt;NO. REQ&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:13pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;HW0511&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:dashed;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;BOLT-HHCS-1/2-13 X 3 3/4&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:dashed;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;8&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:13pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;HW0111&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:dashed;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;WASHER-FLAT-1/2-SAE&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:dashed;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 5pt;padding-right: 4pt;text-indent: 0pt;text-align: center;&quot;&gt;16&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot; rowspan=&quot;2&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 7pt;text-indent: 0pt;text-align: center;&quot;&gt;3&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;14025001&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:dashed;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;PGC DRIVE WHEEL MOUNT&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:dashed;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;PANEL SIDE&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;14025003&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:dashed;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;PGC DRIVE WHEEL MOUNT&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:dashed;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;NON-PANEL SIDE&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;4&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;HW0306&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:dashed;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;BOLT-FHSCS-1/4-20 X 1&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:dashed;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 5pt;padding-right: 4pt;text-indent: 0pt;text-align: center;&quot;&gt;16&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;5&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;14024010&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:dashed;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;SPROCKET-GANTRY POWER DRIVE&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:dashed;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;36 TOOTH (SEE NOTES)&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;6&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;14027008&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:dashed;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;SPACER-SPROCKET/WHEEL&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:dashed;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot; rowspan=&quot;2&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 7pt;text-indent: 0pt;text-align: center;&quot;&gt;7&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;14026006&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:dashed;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;WHEEL-MODIFIED-V-GROOVE&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:dashed;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;14026007&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:dashed;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;WHEEL-MODIFIED-POLY&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:dashed;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot; rowspan=&quot;2&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 7pt;text-indent: 0pt;text-align: center;&quot;&gt;8&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;14022014&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:dashed;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;V-GROOVE WHEEL ASSEMBLY&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:dashed;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;W/ 36 TOOTH SPROCKET (SEE NOTES)&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;14022013&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:dashed;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;POLY WHEEL ASSEMBLY&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:dashed;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;W/ 36 TOOTH SPROCKET (SEE NOTES)&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;9&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;HW0701&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:dashed;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;BOLT-HHCS-3/4-10 X 5 1/2&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:dashed;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;10&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;HW0119&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:dashed;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;WASHER-FLAT-1-SAE&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:dashed;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;11&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;HW0017&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:dashed;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;NUT-HEX-3/4-10&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:dashed;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;12&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;C0090-1&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:dashed;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;SPANNER-BEARING-DRIVE WHEEL&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:dashed;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;13&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;HW0402&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:dashed;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;BOLT-HHCS-3/8-16 X 1 1/4&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:dashed;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 5pt;padding-right: 4pt;text-indent: 0pt;text-align: center;&quot;&gt;12&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;14&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;HW0108&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:dashed;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;WASHER-FLAT-3/8-SAE&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:dashed;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;4&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;15&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;HW0110&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:dashed;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;WASHER-LOCK-1/2&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:dashed;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;8&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;16&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;HW0007&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:dashed;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;NUT-HEX-1/2-13&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:dashed;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;8&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;17&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;HW0107&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:dashed;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;WASHER-LOCK-3/8&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:dashed;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;8&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;18&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;HW0108&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:dashed;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;WASHER-FLAT-3/8-SAE&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:dashed;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;8&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;19&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;HW0328&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;BOLT-HHCS-5/16-18 X 3/4&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;8&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:13pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;20&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;HW0106&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;WASHER-FLAT-5/16-SAE&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 5pt;padding-right: 4pt;text-indent: 0pt;text-align: center;&quot;&gt;16&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;21&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;HW0004&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;NUT-HEX-5/16-18&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;8&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;22&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;PT0003-1&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:dashed;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;SPROCKET-41 PITCH-13T-3/4&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:dashed;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;23&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;PT0005&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:dashed;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;LINK-CONNECTING-#41&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:dashed;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;24&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;14027009-2&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:dashed;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;MOUNT-GEARBOX&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:dashed;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;4&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;25&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;PT0100&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:dashed;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;GEAR BOX-30:1&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:dashed;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot; rowspan=&quot;2&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 7pt;padding-left: 7pt;text-indent: 0pt;text-align: left;&quot;&gt;26&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;00158001-21&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:dashed;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;CHAIN-DRIVE-#41&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:dashed;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s210&quot; style=&quot;padding-top: 2pt;text-indent: 0pt;text-align: center;&quot;&gt;FOR USE W/ 40 TOOTH SPROCKET (SEE NOTES)&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;00158001-26&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:dashed;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;CHAIN-DRIVE-#41&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:dashed;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s210&quot; style=&quot;padding-top: 2pt;text-indent: 0pt;text-align: center;&quot;&gt;FOR USE W/ 36 TOOTH SPROCKET (SEE NOTES)&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;27&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;E0121-1&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:dashed;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;MOTOR-1/2 HP&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:dashed;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;56C-1750RPM INV RATED TS&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;28&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;HW0103&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:dashed;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;WASHER-LOCK-1/4&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:dashed;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;8&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;29&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;HW0329&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:dashed;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;BOLT-HHCS-6MM X 12MM&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:dashed;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;8&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;30&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s211&quot; style=&quot;padding-left: 1pt;text-indent: 0pt;line-height: 11pt;text-align: center;&quot;&gt;-&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:dashed;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;SHAFT&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:dashed;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;INCLUDED WITH PT0100&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;31&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s211&quot; style=&quot;padding-left: 1pt;text-indent: 0pt;line-height: 11pt;text-align: center;&quot;&gt;-&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:dashed;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;WASHER&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:dashed;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;INCLUDED WITH PT0100&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;32&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s211&quot; style=&quot;padding-left: 1pt;text-indent: 0pt;line-height: 11pt;text-align: center;&quot;&gt;-&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:dashed;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;RETAINING RING&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:dashed;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;INCLUDED WITH PT0100&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;33&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;14017015-2&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:dashed;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;GUARD-CHAIN&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:dashed;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot; rowspan=&quot;4&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-left: 7pt;text-indent: 0pt;text-align: left;&quot;&gt;34&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;14022003&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:dashed;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;DRIVE WHEEL ASSEMBLY - V GROOVE&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:dashed;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;NON-PANEL SIDE&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;14022005&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:dashed;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;DRIVE WHEEL ASSEMBLY - V GROOVE&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:dashed;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;PANEL SIDE&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;14022004&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:dashed;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;DRIVE WHEEL ASSEMBLY - POLY OPTION&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:dashed;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;NON-PANEL SIDE&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;14022006&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:dashed;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;DRIVE WHEEL ASSEMBLY - POLY OPTION&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:dashed;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;PANEL SIDE&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;35&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;HW0105&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:dashed;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;WASHER-LOCK-5/16&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:dashed;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;8&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;36&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;00197017&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:dashed;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;KEY-3/16 X 1&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:dashed;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;FOR ITEM 22 (NOT SHOWN)&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;/table&gt;<br /> <br /> <br /> NOTE: 40 TOOTH SPROCKETS NO LONGER AVAILABLE. MUST CONVERT SPROCKETS AND CHAIN TO 36 TOOTH.<br /> <br /> ====IDLER WHEELS====<br /> [[File:IOP-146 PGC-PDC (03-26-10)2.1.1.jpg|700px|border]]<br /> <br /> &lt;table style=&quot;border-collapse:collapse;margin-left:0;&quot; cellspacing=&quot;0&quot;&gt;&lt;tr style=&quot;height:24pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s202&quot; style=&quot;padding-top: 7pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;ITEM&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s202&quot; style=&quot;padding-top: 2pt;padding-left: 16pt;text-indent: -2pt;text-align: left;&quot;&gt;BHS PART NUMBER&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s202&quot; style=&quot;padding-top: 7pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;DESCRIPTION&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:2pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s202&quot; style=&quot;padding-top: 7pt;padding-left: 55pt;padding-right: 54pt;text-indent: 0pt;text-align: center;&quot;&gt;NOTES&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:2pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s202&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;padding-right: 2pt;text-indent: 1pt;text-align: left;&quot;&gt;NO. REQ&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:11pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;text-indent: 0pt;line-height: 9pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-left: 9pt;text-indent: 0pt;line-height: 9pt;text-align: left;&quot;&gt;HW0511&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-left: 9pt;text-indent: 0pt;line-height: 9pt;text-align: left;&quot;&gt;BOLT-HHCS-1/2-13 X 3 3/4&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:2pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:2pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-left: 10pt;text-indent: 0pt;line-height: 9pt;text-align: left;&quot;&gt;8&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;HW0111&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;WASHER-FLAT-1/2-SAE&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:2pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:2pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 8pt;text-indent: 0pt;text-align: left;&quot;&gt;16&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot; rowspan=&quot;2&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 7pt;text-indent: 0pt;text-align: center;&quot;&gt;3&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;C0040&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;CASTER-10 X 3&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:2pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;padding-right: 13pt;text-indent: 0pt;text-align: right;&quot;&gt;FOR USE W/ V-GROOVE OPTION&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:2pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 11pt;text-indent: 0pt;text-align: left;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;C0095&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;CASTER-10 X 3-POLY&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:2pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;padding-right: 10pt;text-indent: 0pt;text-align: right;&quot;&gt;FOR USE W/ POLY WHEEL OPTION&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:2pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 11pt;text-indent: 0pt;text-align: left;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;4&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;HW0110&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;WASHER-LOCK-1/2&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:2pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:2pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 8pt;text-indent: 0pt;text-align: left;&quot;&gt;16&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;5&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;HW0007&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;NUT-HEX-1/2-13&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:2pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:2pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 8pt;text-indent: 0pt;text-align: left;&quot;&gt;16&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;6&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;14025002&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;MOUNT-CASTER&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:2pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:2pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 11pt;text-indent: 0pt;text-align: left;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;/table&gt;<br /> <br /> === ELECTRICAL ===<br /> <br /> ====CONTROL PANEL====<br /> [[File:IOP-146 PGC-PDC (03-26-10)3.0.1.jpg|700px|border]]<br /> <br /> &lt;table style=&quot;border-collapse:collapse;margin-left:0;&quot; cellspacing=&quot;0&quot;&gt;&lt;tr style=&quot;height:24pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s202&quot; style=&quot;padding-top: 7pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;ITEM&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s202&quot; style=&quot;padding-top: 2pt;padding-left: 16pt;text-indent: -2pt;text-align: left;&quot;&gt;BHS PART NUMBER&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s202&quot; style=&quot;padding-top: 7pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;DESCRIPTION&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s202&quot; style=&quot;padding-top: 7pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;NOTES&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s202&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;padding-right: 2pt;text-indent: 1pt;text-align: left;&quot;&gt;NO. REQ&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:11pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;text-indent: 0pt;line-height: 9pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-left: 9pt;padding-right: 8pt;text-indent: 0pt;line-height: 9pt;text-align: center;&quot;&gt;E1020&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-left: 9pt;text-indent: 0pt;line-height: 9pt;text-align: left;&quot;&gt;BLOCK-TERMINAL-LARGE-EA1&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-left: 5pt;padding-right: 4pt;text-indent: 0pt;line-height: 9pt;text-align: center;&quot;&gt;20&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;padding-right: 8pt;text-indent: 0pt;text-align: center;&quot;&gt;E1040&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;BARRIER-TERMINAL-END-LARGE&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;4&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;3&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;padding-right: 8pt;text-indent: 0pt;text-align: center;&quot;&gt;E0908&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;TRACK-MOUNTING&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot; rowspan=&quot;2&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;p class=&quot;s23&quot; style=&quot;text-indent: 0pt;text-align: center;&quot;&gt;4&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;padding-right: 8pt;text-indent: 0pt;text-align: center;&quot;&gt;E0340&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;FUSE-ATMR10&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;10A&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;3&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:13pt&quot;&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;padding-right: 8pt;text-indent: 0pt;text-align: center;&quot;&gt;X350004&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;FUSE&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 2pt;padding-left: 39pt;text-indent: 0pt;text-align: left;&quot;&gt;12A-FAST ACTING&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;3&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;5&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;padding-right: 8pt;text-indent: 0pt;text-align: center;&quot;&gt;E1012&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;RELAY&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;11 PIN&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;6&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;padding-right: 8pt;text-indent: 0pt;text-align: center;&quot;&gt;E1013&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;SOCKET-RELAY-11 PIN&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;7&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;padding-right: 8pt;text-indent: 0pt;text-align: center;&quot;&gt;E0339&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;FUSE-FLQ-12&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;12A, 600V&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;3&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;8&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;padding-right: 8pt;text-indent: 0pt;text-align: center;&quot;&gt;E0122-1&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;BASE-DISCONNECT&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s225&quot; style=&quot;padding-left: 47pt;text-indent: 0pt;line-height: 10pt;text-align: left;&quot;&gt;† &lt;span class=&quot;s182&quot;&gt;SEE NOTES&lt;/span&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;9&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;padding-right: 8pt;text-indent: 0pt;text-align: center;&quot;&gt;E0341&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;CLIP-GROUNDING&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot; rowspan=&quot;3&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-left: 7pt;text-indent: 0pt;text-align: left;&quot;&gt;10&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;padding-right: 8pt;text-indent: 0pt;text-align: center;&quot;&gt;RM0004N30&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;LINE REACTOR&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;padding-left: 28pt;text-indent: 0pt;text-align: left;&quot;&gt;FOR USE WITH 208/240V&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;padding-right: 8pt;text-indent: 0pt;text-align: center;&quot;&gt;RM0002M12&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;LINE REACTOR&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;padding-left: 35pt;text-indent: 0pt;text-align: left;&quot;&gt;FOR USE WITH 480V&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;padding-right: 8pt;text-indent: 0pt;text-align: center;&quot;&gt;X350003&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;LINE REACTOR - 575 VOLT&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;padding-left: 35pt;text-indent: 0pt;text-align: left;&quot;&gt;FOR USE WITH 575V&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot; rowspan=&quot;3&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-left: 8pt;text-indent: 0pt;text-align: left;&quot;&gt;11&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;padding-right: 8pt;text-indent: 0pt;text-align: center;&quot;&gt;E1212&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;TRANSFORMER&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;padding-left: 40pt;text-indent: 0pt;text-align: left;&quot;&gt;240/480V TO 120V&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;padding-right: 4pt;text-indent: 0pt;text-align: center;&quot;&gt;E0208&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;TRANSFORMER&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;padding-left: 47pt;text-indent: 0pt;text-align: left;&quot;&gt;208V TO 120V&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;padding-right: 8pt;text-indent: 0pt;text-align: center;&quot;&gt;X350000&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;TRANSFORMER&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;padding-left: 47pt;text-indent: 0pt;text-align: left;&quot;&gt;575V TO 120V&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;12&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;padding-right: 8pt;text-indent: 0pt;text-align: center;&quot;&gt;E1023&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;WIREWAY&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 5pt;padding-right: 4pt;text-indent: 0pt;text-align: center;&quot;&gt;AR&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot; rowspan=&quot;3&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-left: 7pt;text-indent: 0pt;text-align: left;&quot;&gt;13&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;padding-right: 8pt;text-indent: 0pt;text-align: center;&quot;&gt;E0015&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;VARIABLE FREQUENCY DRIVE (VFD)&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;padding-left: 28pt;text-indent: 0pt;text-align: left;&quot;&gt;FOR USE WITH 208/240V&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;padding-right: 8pt;text-indent: 0pt;text-align: center;&quot;&gt;E0014&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;VARIABLE FREQUENCY DRIVE (VFD)&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;padding-left: 35pt;text-indent: 0pt;text-align: left;&quot;&gt;FOR USE WITH 480V&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;padding-right: 8pt;text-indent: 0pt;text-align: center;&quot;&gt;X350002&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;VARIABLE FREQUENCY DRIVE (VFD)&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;padding-left: 35pt;text-indent: 0pt;text-align: left;&quot;&gt;FOR USE WITH 575V&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;14&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;padding-right: 8pt;text-indent: 0pt;text-align: center;&quot;&gt;E1219&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;FUSE&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;padding-left: 50pt;text-indent: 0pt;text-align: left;&quot;&gt;0.8A, 240/480V&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;15&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;padding-right: 8pt;text-indent: 0pt;text-align: center;&quot;&gt;E0123-1&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;HANDLE-DISCONNECT&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s225&quot; style=&quot;padding-left: 22pt;text-indent: 0pt;line-height: 10pt;text-align: left;&quot;&gt;† &lt;span class=&quot;s182&quot;&gt;SEE NOTES (NOT SHOWN)&lt;/span&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;16&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;padding-right: 8pt;text-indent: 0pt;text-align: center;&quot;&gt;E0124-2&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;SHAFT-DISCONNECT&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s225&quot; style=&quot;padding-left: 20pt;text-indent: 0pt;line-height: 10pt;text-align: left;&quot;&gt;†† &lt;span class=&quot;s182&quot;&gt;SEE NOTES (NOT SHOWN)&lt;/span&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;17&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;padding-right: 8pt;text-indent: 0pt;text-align: center;&quot;&gt;E0128&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;ADAPTER-SHAFT&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s225&quot; style=&quot;padding-left: 22pt;text-indent: 0pt;line-height: 10pt;text-align: left;&quot;&gt;† &lt;span class=&quot;s182&quot;&gt;SEE NOTES (NOT SHOWN)&lt;/span&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;/table&gt;<br /> <br /> † FOR UNITS BUILT PRIOR TO 01/12/10, A SHAFT ADAPTER (ITEM# 17) IS REQUIRED WHEN REPLACING EITHER ITEM #8 OR ITEM #15.<br /> <br /> † † FOR UNITS BUILT PRIOR TO 01/12/10, ITEM #’S 8 AND 15 MUST BE REPLACED IF REPLACING ITEM #16.<br /> <br /> IF THERE IS ANY QUESTION AS TO THE THE ITEMS NEEDED WHEN ORDERING A NEW DISCONNECT BASE, SHAFT OR HANDLE,<br /> PLEASE CONTACT BHS TECH SUPPORT WITH THE MANUFACTURER’S PART NUMBER OF THE DISCONNECT BASE AND HANDLE.<br /> <br /> [[File:IOP-146 PGC-PDC (03-26-10)3.0.2.jpg|700px|border]]<br /> <br /> &lt;table style=&quot;border-collapse:collapse;margin-left:0;&quot; cellspacing=&quot;0&quot;&gt;&lt;tr style=&quot;height:24pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s202&quot; style=&quot;padding-top: 7pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;ITEM&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s202&quot; style=&quot;padding-top: 2pt;padding-left: 16pt;text-indent: -2pt;text-align: left;&quot;&gt;BHS PART NUMBER&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s202&quot; style=&quot;padding-top: 7pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;DESCRIPTION&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s202&quot; style=&quot;padding-top: 7pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;NOTES&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s202&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;padding-right: 2pt;text-indent: 1pt;text-align: left;&quot;&gt;NO. REQ&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:11pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;text-indent: 0pt;line-height: 9pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-left: 9pt;padding-right: 8pt;text-indent: 0pt;line-height: 9pt;text-align: center;&quot;&gt;HW0402&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-left: 9pt;text-indent: 0pt;line-height: 9pt;text-align: left;&quot;&gt;BOLT-HHCS 3/8-16 X 1&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;text-indent: 0pt;line-height: 9pt;text-align: center;&quot;&gt;4&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:13pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;padding-right: 8pt;text-indent: 0pt;text-align: center;&quot;&gt;HW0108&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;WASHER-FLAT 3/8 SAE&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;8&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;3&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;padding-right: 8pt;text-indent: 0pt;text-align: center;&quot;&gt;HW0107&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;WASHER-LOCK 3/8&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;4&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;4&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;padding-right: 8pt;text-indent: 0pt;text-align: center;&quot;&gt;HW0005&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;NUT-HEX 3/8-16&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;4&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;5&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;*&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;CONTROL PANEL&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;(SEE NOTE)&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;6&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;*&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;CONNECTOR&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;(SEE NOTE)&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;7&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;*&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;CONNECTOR&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;(SEE NOTE)&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;/table&gt;<br /> <br /> NOTE: MODEL NUMBER, SERIAL NUMBER AND VOLTAGE REQUIREMENTS MUST BE SUPPLIED TO FACTORY FOR PROPER PART IDENTIFICATION.<br /> <br /> ====CABLE FESTOON====<br /> [[File:IOP-146 PGC-PDC (03-26-10)3.1.1.jpg|700px|border]]<br /> <br /> &lt;table style=&quot;border-collapse:collapse;margin-left:0;&quot; cellspacing=&quot;0&quot;&gt;&lt;tr style=&quot;height:24pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s202&quot; style=&quot;padding-top: 7pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;ITEM&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s202&quot; style=&quot;padding-top: 2pt;padding-left: 16pt;text-indent: -2pt;text-align: left;&quot;&gt;BHS PART NUMBER&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s202&quot; style=&quot;padding-top: 7pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;DESCRIPTION&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s202&quot; style=&quot;padding-top: 7pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;NOTES&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s202&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;padding-right: 2pt;text-indent: 1pt;text-align: left;&quot;&gt;NO. REQ&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:11pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;text-indent: 0pt;line-height: 9pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-left: 15pt;text-indent: 0pt;line-height: 9pt;text-align: left;&quot;&gt;SWS0010&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-left: 9pt;text-indent: 0pt;line-height: 9pt;text-align: left;&quot;&gt;TROLLEY-CABLE-TOW&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;text-indent: 0pt;line-height: 9pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 15pt;text-indent: 0pt;text-align: left;&quot;&gt;SWS0015&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;TROLLEY-CABLE&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;4&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;3&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;CLAMP-CABLE&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;INCLUDED WITH SWS0001&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;4&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;EYELET&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;INCLUDED WITH SWS0001&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;5&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;EYE-BOLT&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;INCLUDED WITH SWS0001&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;6&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;NUT&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;INCLUDED WITH SWS0001&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;4&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;7&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 15pt;text-indent: 0pt;text-align: left;&quot;&gt;SWS0001&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;HARDWARE KIT&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;8&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;BOLT&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;INCLUDED WITH SWS0021&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;9&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;FLAT WASHER&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;INCLUDED WITH SWS0021&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;4&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;10&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;CLAMP&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;INCLUDED WITH SWS0021&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;11&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;WING NUT&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;INCLUDED WITH SWS0021&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;12&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 15pt;text-indent: 0pt;text-align: left;&quot;&gt;SWS0021&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;CLIP-CABLE&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;6&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;13&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 19pt;text-indent: 0pt;text-align: left;&quot;&gt;CF0055&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;CABLE&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;NYLON COATED&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 5pt;padding-right: 4pt;text-indent: 0pt;text-align: center;&quot;&gt;AR&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;14&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 15pt;text-indent: 0pt;text-align: left;&quot;&gt;SWS0005&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;CLAMP-END-FIXED&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;15&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 15pt;text-indent: 0pt;text-align: left;&quot;&gt;14617122&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;BRACKET-CABLE&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;16&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 18pt;text-indent: 0pt;text-align: left;&quot;&gt;HW0401&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;BOLT-HHCS-3/8-16 X 3/4&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;17&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 18pt;text-indent: 0pt;text-align: left;&quot;&gt;HW0107&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;WASHER-LOCK3/8&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;4&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;18&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 18pt;text-indent: 0pt;text-align: left;&quot;&gt;HW0108&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;WASHER-FLAT-3/8-SAE&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;4&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;/table&gt;<br /> <br /> ====CONTROL PENDANT====<br /> <br /> [[File:IOP-146 PGC-PDC (03-26-10)3.2.1.jpg|700px|border]]<br /> <br /> &lt;table style=&quot;border-collapse:collapse;margin-left:0;&quot; cellspacing=&quot;0&quot;&gt;&lt;tr style=&quot;height:24pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s202&quot; style=&quot;padding-top: 7pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;ITEM&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s202&quot; style=&quot;padding-top: 2pt;padding-left: 16pt;text-indent: -2pt;text-align: left;&quot;&gt;BHS PART NUMBER&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s202&quot; style=&quot;padding-top: 7pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;DESCRIPTION&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s202&quot; style=&quot;padding-top: 7pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;NOTES&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s202&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;padding-right: 2pt;text-indent: 1pt;text-align: left;&quot;&gt;NO. REQ&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:11pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;text-indent: 0pt;line-height: 9pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-left: 22pt;text-indent: 0pt;line-height: 9pt;text-align: left;&quot;&gt;E0814&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-left: 9pt;text-indent: 0pt;line-height: 9pt;text-align: left;&quot;&gt;PENDANT-6 BUTTON &lt;i&gt;(YELLOW)&lt;/i&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;padding-left: 50pt;text-indent: 0pt;text-align: left;&quot;&gt;WITH 6&amp;#39; CORD&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;text-indent: 0pt;line-height: 9pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 22pt;text-indent: 0pt;text-align: left;&quot;&gt;E0518&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;16-10 SO CORD&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br/&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 5pt;padding-right: 4pt;text-indent: 0pt;text-align: center;&quot;&gt;A/R&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;3&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 21pt;text-indent: 0pt;text-align: left;&quot;&gt;PB358&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;PUSH BUTTON&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br/&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;6&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;4&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 19pt;text-indent: 0pt;text-align: left;&quot;&gt;536K50&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;CONTACT BLOCK&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br/&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;6&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;/table&gt;<br /> <br /> <br /> &lt;table style=&quot;border-collapse:collapse;margin-left:0;&quot; cellspacing=&quot;0&quot;&gt;&lt;tr style=&quot;height:24pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s202&quot; style=&quot;padding-top: 7pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;ITEM&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s202&quot; style=&quot;padding-top: 2pt;padding-left: 16pt;text-indent: -2pt;text-align: left;&quot;&gt;BHS PART NUMBER&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s202&quot; style=&quot;padding-top: 7pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;DESCRIPTION&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s202&quot; style=&quot;padding-top: 7pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;NOTES&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s202&quot; style=&quot;padding-top: 2pt;padding-left: 4pt;padding-right: 2pt;text-indent: 1pt;text-align: left;&quot;&gt;NO. REQ&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:11pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;text-indent: 0pt;line-height: 9pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-left: 9pt;padding-right: 8pt;text-indent: 0pt;line-height: 9pt;text-align: center;&quot;&gt;N/A&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-left: 9pt;text-indent: 0pt;line-height: 9pt;text-align: left;&quot;&gt;PENDANT-6 BUTTON &lt;i&gt;(ORANGE)&lt;/i&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;DISCONTINUED - MUST ORDER E0814&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-left: 1pt;text-indent: 0pt;line-height: 9pt;text-align: center;&quot;&gt;-&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;padding-right: 8pt;text-indent: 0pt;text-align: center;&quot;&gt;E0518&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;16-10 SO CORD&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br/&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 5pt;padding-right: 4pt;text-indent: 0pt;text-align: center;&quot;&gt;A/R&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;3&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;padding-right: 8pt;text-indent: 0pt;text-align: center;&quot;&gt;550-041&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;BUTTON COVER W/ LEGEND PLATE KIT&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s182&quot; style=&quot;padding-top: 1pt;padding-left: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;INCL. ALL 6 POSITIONS&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:12pt&quot;&gt;&lt;td style=&quot;width:25pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;4&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:67pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;padding-right: 8pt;text-indent: 0pt;text-align: center;&quot;&gt;550-039&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:188pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;padding-left: 9pt;text-indent: 0pt;text-align: left;&quot;&gt;SWITCH-2 BUTTON-1 SPEED&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:140pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br/&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:27pt;border-top-style:solid;border-top-width:1pt;border-top-color:#231F20;border-left-style:solid;border-left-width:1pt;border-left-color:#231F20;border-bottom-style:solid;border-bottom-width:1pt;border-bottom-color:#231F20;border-right-style:solid;border-right-width:1pt;border-right-color:#231F20&quot;&gt;&lt;p class=&quot;s23&quot; style=&quot;padding-top: 1pt;text-indent: 0pt;text-align: center;&quot;&gt;3&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;/table&gt;<br /> <br /> ==== ELECTRICAL SCHEMATICS====<br /> <br /> [[File:IOP-146 PGC-PDC (03-26-10)PAGE42.jpg|700px|border]]<br /> <br /> [[File:IOP-146 PGC-PDC (03-26-10)PAGE43.jpg|700px|border]]<br /> <br /> [[File:IOP-146 PGC-PDC (03-26-10)PAGE44.jpg|700px|border]]<br /> <br /> [[File:IOP-146 PGC-PDC (03-26-10)PAGE45.jpg|700px|border]]<br /> <br /> [[File:IOP-146 PGC-PDC (03-26-10)PAGE46.jpg|700px|border]]<br /> <br /> [[File:IOP-146 PGC-PDC (03-26-10)PAGE47.jpg|700px|border]]<br /> <br /> [[File:IOP-146 PGC-PDC (03-26-10)PAGE48.jpg|700px|border]]<br /> <br /> [[File:IOP-146 PGC-PDC (03-26-10)PAGE49.jpg|700px|border]]<br /> <br /> ==== ELECTRICAL WIRING DIAGRAMS====<br /> <br /> [[File:IOP-146 PGC-PDC (03-26-10)PAGE50.jpg|700px|border]]<br /> <br /> [[File:IOP-146 PGC-PDC (03-26-10)PAGE51.jpg|700px|border]]<br /> <br /> [[File:IOP-146 PGC-PDC (03-26-10)PAGE52.jpg|700px|border]]<br /> <br /> [[File:IOP-146 PGC-PDC (03-26-10)PAGE53.jpg|700px|border]]<br /> <br /> [[File:IOP-146 PGC-PDC (03-26-10)PAGE54.jpg|700px|border]]<br /> <br /> [[File:IOP-146 PGC-PDC (03-26-10)PAGE55.jpg|700px|border]]<br /> <br /> [[File:IOP-146 PGC-PDC (03-26-10)PAGE56.jpg|700px|border]]<br /> <br /> [[File:IOP-146 PGC-PDC (03-26-10)PAGE57.jpg|700px|border]]<br /> <br /> == STATEMENT OF WARRANTY ==<br /> '''Statement of Warranty'''<br /> <br /> [https://store.bhs1.com/warranty Click here] for details on BHS' Statement of Warranty.</div>

Kperrier https://tech.bhs1.com/index.php?title=IOSM-240_BLB&diff=7680 2024-09-10T20:40:54Z

<p>Kperrier: /* BATTERY LIFTING BEAM DAILY INSPECTION */</p> <hr /> <div><br /> <br /> '''Looking for a specific replacement part?''' Ctrl-F (or Command-F for Mac users) brings up your browsers search panel and can search any text on the entire web page. Find parts by searching a part # or part description.<br /> <br /> '''Register your equipment with [https://na.bhs1.com/media-library/bhs-optima/ BHS Optima], BHS's free app.'''<br /> <br /> '''California Residents''': WARNING: This product contains chemicals known to the State of California to cause cancer and/or reproductive harm, and birth defects or other reproductive harm. [https://na.bhs1.com/about-bhs/compliance-statement-for-california-proposition-65/ Learn more here.]<br /> <br /> == Battery Lifting Beam (BLB) System Parts &amp; Service Manual ==<br /> ===SAFETY ===<br /> [[File:IOSM-240-BLB-(03-06-07)-2.jpg|700px|border]]<br /> <br /> <br /> === GENERAL SAFETY PRACTICES WHEN HANDLING SUSPENDED LOADS ===<br /> [[File:IOSM-240-BLB-(03-06-07)-3.jpg|500px|right]]<br /> '''GENERAL SAFETY PRACTICES WHEN HANDLING SUSPENDED LOADS'''<br /> <br /> &lt;ol&gt;<br /> <br /> &lt;li&gt;Always lock your elbow and stay at least an arm's length away from the load.&lt;/li&gt;<br /> &lt;li&gt;Position hand at rear of lifting beam to help guide battery.&lt;/li&gt;<br /> &lt;li&gt;Never use your body or limbs to stop a swinging load.&lt;/li&gt;<br /> &lt;li&gt;Be sure feet are not under the battery and are out of the primary danger zone.&lt;/li&gt;<br /> &lt;li&gt;The operator, as required by your company's safety policy and/or O.S.H.A, '''SHALL''' wear the proper safety equipment.&lt;/li&gt;<br /> &lt;li&gt;All lifting apparatus '''SHALL''' be inspected at the beginning of each shift to ensure no damage or defects are present that could pose a safety hazard.&lt;/li&gt;<br /> &lt;li&gt;Areas of travel '''SHALL''' be clear of any trip hazards and obstacles.&lt;/li&gt;<br /> &lt;li&gt;Only trained and authorized personnel '''SHALL''' operate overhead lifting equipment and this battery below-the- hook device.&lt;/li&gt;<br /> &lt;li&gt;The operator '''SHALL''' verity that any load slings or below-the-hook devices are properly secured to the load prior to lifting or moving the load.&lt;/li&gt;<br /> &lt;li&gt;No other persons '''SHALL''' be in the work area or travel path of the load or empty below-the-hook device.&lt;/li&gt;<br /> &lt;li&gt;The operator '''SHALL NOT''' place hands or fingers on hooks.&lt;/li&gt;<br /> &lt;li&gt;The operator '''SHALL NOT''' tilt the below-the-hook device causing the hooks to hang outside the lines of the below-the-hook device.&lt;/li&gt;<br /> &lt;/ol&gt;<br /> <br /> === BATTERY LIFTING BEAM DAILY INSPECTION ===<br /> [[File:IOSM-240-BLB-(03-06-07)-4.jpg|700px|border]]<br /> <br /> '''BATTERY LIFTING BEAM DAILY INSPECTION'''<br /> <br /> Inspections are to be performed: &quot; At the beginning of each shift and/or before first use.&quot; Using a lifting device that is worn or damaged can cause loss of load and possible per­sonal injury or death.<br /> <br /> 1. Inspect the wood laminate load members for any cracks, splits, indentions, or delamination.<br /> <br /> 2. Inspect hook adjusting trunnions for wear or damage.<br /> <br /> 3. Inspect load pins on battery lift hooks for wear or damage.<br /> <br /> 4. Inspect battery hook engaging throat for excessive wear or damage.<br /> <br /> * Minimum throat height - 5/8&quot; at center of throat.<br /> <br /> 5. Inspect lift &quot;A&quot; plate for excessive wear.<br /> <br /> &lt;li&gt;Minimum height - 3/4&quot; at engagement point to hoist.<br /> &lt;/li&gt;<br /> <br /> '''If any of the above conditions do not meet wear and/or dimensional specifications, this device should be removed from service and replaced immediately.'''<br /> <br /> === PROPER HOOK ENGAGEMENT OPERATION ===<br /> '''PROPER HOOK ENGAGEMENT OPERATION'''<br /> <br /> Lower the lifting beam horizontally until the hooks are slightly above the battery eyelets.<br /> <br /> Push the beam forward a few inches to allow the hook farthest from you to pass the outside edge of the battery eyelet.<br /> <br /> Lower the beam until the hook inserts into the eyelet.<br /> <br /> Push down slightly on the heal of the beam closest to you and lower it until the hook can be inserted into the battery eyelet closest to you.<br /> <br /> Lift the beam slightly to engage the hooks complete­ly in the eyelets of the battery.<br /> <br /> Insure both hooks are fully engaged in the battery eyelet.<br /> <br /> Continue to lift and move battery.<br /> <br /> === PROPER HOOK POSITION FOR THE BHS BLB-6000 BATTERY LIFTING BEAM ===<br /> [[File:IOSM-240-BLB-(03-06-07)-6.jpg|500px|none]]<br /> '''PROPER HOOK POSITION FOR THE BHS BLB-6000 BATTERY LIFTING BEAM'''<br /> '''BASIC OPERATION NOTES'''<br /> <br /> Make sure hooks are fully engaged in battery lifting eyelet prior to lifting the battery. Hooks '''SHALL''' be fully inserted into the battery holes as shown in Figure #1<br /> <br /> Hooks '''SHALL''' be spaced equally around the center line of the below-the-hook device and be properly placed in the scalloped adjusting trunnions. Correct positioning of the hooks will allow the battery to be level when lifted.<br /> <br /> Hooks '''SHALL''' be hanging in a vertical position as shown in Figure #1. Do not allow hooks to be tilted inward or outward as in Figures #2 and #3.<br /> <br /> === PRIMARY DANGER ZONES FOR OPERATORS USING BLB-6000 LIFTING BEAM AND GANTRY CRANE ===<br /> [[File:IOSM-240-BLB-(03-06-07)-7.jpg|700px|border]]<br /> <br /> === BLB-6000 ===<br /> [[File:IOSM-240-BLB-(03-06-07)-4.jpg|700px|border]]<br /> <br /> '''BLB-6000'''<br /> <br /> &lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;<br /> <br /> <br /> &lt;table style=&quot;border-collapse:collapse;margin-left:92.8407pt&quot; cellspacing=&quot;0&quot;&gt;&lt;tr style=&quot;height:19pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s128&quot; style=&quot;padding-left: 2pt;text-indent: 0pt;line-height: 11pt;text-align: left;&quot;&gt;I&lt;span style=&quot; color: #1F2020;&quot;&gt;t&lt;/span&gt;e&lt;span style=&quot; color: #1F2020;&quot;&gt;m&lt;/span&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s128&quot; style=&quot;padding-left: 28pt;text-indent: 0pt;line-height: 11pt;text-align: left;&quot;&gt;P&lt;span style=&quot; color: #1F2020;&quot;&gt;Part No.&lt;/span&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s129&quot; style=&quot;padding-left: 26pt;text-indent: 0pt;text-align: left;&quot;&gt;Description&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s128&quot; style=&quot;padding-right: 2pt;text-indent: 0pt;text-align: right;&quot;&gt;Q&lt;span style=&quot; color: #1F2020;&quot;&gt;ty&lt;/span&gt;&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:20pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s130&quot; style=&quot;padding-top: 6pt;padding-left: 7pt;text-indent: 0pt;text-align: left;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-top: 6pt;padding-left: 28pt;text-indent: 0pt;text-align: left;&quot;&gt;24016003&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-top: 7pt;padding-left: 26pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;Wood BLB-6000 Beam&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-top: 8pt;padding-right: 5pt;text-indent: 0pt;line-height: 11pt;text-align: right;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:13pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 8pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 28pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;24015001&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 26pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;Hook Standard&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-right: 5pt;text-indent: 0pt;line-height: 11pt;text-align: right;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:13pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 8pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;3&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 28pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;240&lt;span style=&quot; color: #010101;&quot;&gt;1&lt;/span&gt;6001&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 26pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;Lift Plate - &lt;span style=&quot; color: #333;&quot;&gt;Hook&lt;/span&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-right: 5pt;text-indent: 0pt;line-height: 11pt;text-align: right;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:14pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 8pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;4&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 28pt;text-indent: 0pt;text-align: left;&quot;&gt;240&lt;span style=&quot; color: #010101;&quot;&gt;1&lt;/span&gt;7002&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 26pt;text-indent: 0pt;text-align: left;&quot;&gt;P&lt;span style=&quot; color: #010101;&quot;&gt;l&lt;/span&gt;ate Spanner&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-right: 5pt;text-indent: 0pt;text-align: right;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:15pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 8pt;text-indent: 0pt;text-align: left;&quot;&gt;5&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-top: 1pt;padding-left: 28pt;text-indent: 0pt;text-align: left;&quot;&gt;240&lt;span style=&quot; color: #010101;&quot;&gt;1&lt;/span&gt;7005&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-top: 1pt;padding-left: 26pt;text-indent: 0pt;text-align: left;&quot;&gt;Spacer &lt;span style=&quot; color: #333;&quot;&gt;- &lt;/span&gt;Block&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-top: 1pt;padding-right: 5pt;text-indent: 0pt;text-align: right;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:14pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 8pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;6&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-top: 1pt;padding-left: 28pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;24096001&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s130&quot; style=&quot;padding-top: 1pt;padding-left: 26pt;text-indent: 0pt;line-height: 11pt;text-align: left;&quot;&gt;Trunnion &lt;span style=&quot; color: #1F2020;&quot;&gt;- Aluminum&lt;/span&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-top: 1pt;padding-right: 5pt;text-indent: 0pt;line-height: 11pt;text-align: right;&quot;&gt;4&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:14pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 8pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;7&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 28pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;LB0080&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 26pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;Pin - Spring 1/4&quot; x &lt;span style=&quot; color: #333;&quot;&gt;1 1/2&quot;&lt;/span&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-top: 1pt;padding-right: 5pt;text-indent: 0pt;line-height: 11pt;text-align: right;&quot;&gt;8&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:14pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 8pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;8&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 28pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;LB0060&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 26pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;Straps - Tie&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-right: 5pt;text-indent: 0pt;line-height: 11pt;text-align: right;&quot;&gt;4&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:14pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 8pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;9&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s130&quot; style=&quot;padding-left: 28pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;LB0090&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 26pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;Bol&lt;span style=&quot; color: #010101;&quot;&gt;t &lt;/span&gt;1/2 x 5 NCGR5&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-top: 1pt;padding-right: 5pt;text-indent: 0pt;line-height: 11pt;text-align: right;&quot;&gt;5&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:13pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 2pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;10&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 28pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;HW0111&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 26pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;Washer 1/2 Flat &lt;span style=&quot; color: #333;&quot;&gt;- &lt;/span&gt;Zinc&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s133&quot; style=&quot;padding-right: 5pt;text-indent: 0pt;line-height: 11pt;text-align: right;&quot;&gt;10&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:14pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 2pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;11&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s130&quot; style=&quot;padding-left: 28pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;LB0100&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 26pt;text-indent: 0pt;line-height: 11pt;text-align: left;&quot;&gt;Nut- Lock &lt;span style=&quot; color: #333;&quot;&gt;- &lt;/span&gt;Cone 1/2&quot; x 13&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-right: 5pt;text-indent: 0pt;line-height: 11pt;text-align: right;&quot;&gt;5&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:14pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 2pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;12&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 27pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;00196411&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 26pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;Label Danger - &lt;span style=&quot; color: #333;&quot;&gt;Insure &lt;/span&gt;Engagement&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-top: 1pt;padding-right: 5pt;text-indent: 0pt;line-height: 11pt;text-align: right;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:13pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 2pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;13&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 27pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;00196703&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 26pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;Label &lt;span style=&quot; color: #333;&quot;&gt;- &lt;/span&gt;Capacity 6000 Lbs.&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-right: 5pt;text-indent: 0pt;line-height: 11pt;text-align: right;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:14pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 2pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;14&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 28pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;LB0070&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 26pt;text-indent: 0pt;line-height: 11pt;text-align: left;&quot;&gt;Screw Wood &lt;span style=&quot; color: #333;&quot;&gt;#10 &lt;/span&gt;x 2 &lt;span style=&quot; color: #333;&quot;&gt;FHWS&lt;/span&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-right: 6pt;text-indent: 0pt;line-height: 11pt;text-align: right;&quot;&gt;12&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:14pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 2pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;15&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 28pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;LB0130&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 26pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;Tag Serial &lt;span class=&quot;s134&quot;&gt;# &lt;/span&gt;&lt;span class=&quot;s135&quot;&gt;- &lt;/span&gt;BLB-6000&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-top: 1pt;padding-right: 6pt;text-indent: 0pt;line-height: 11pt;text-align: right;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:13pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 2pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;16&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 28pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;LB-Inspection La&lt;span style=&quot; color: #010101;&quot;&gt;b&lt;/span&gt;el&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 26pt;text-indent: 0pt;line-height: 11pt;text-align: left;&quot;&gt;Label - Caution - &lt;span style=&quot; color: #333;&quot;&gt;Inspection - &lt;/span&gt;BLB-6000&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-right: 6pt;text-indent: 0pt;line-height: 11pt;text-align: right;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:14pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 2pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;17&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 27pt;text-indent: 0pt;text-align: left;&quot;&gt;00196213&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 26pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;Warning Label&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s130&quot; style=&quot;padding-right: 6pt;text-indent: 0pt;line-height: 12pt;text-align: right;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:13pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s128&quot; style=&quot;padding-left: 27pt;text-indent: 0pt;line-height: 11pt;text-align: left;&quot;&gt;SP-2400&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s129&quot; style=&quot;padding-left: 26pt;text-indent: 0pt;line-height: 11pt;text-align: left;&quot;&gt;Parts &amp; Service Instructions&lt;/span&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s136&quot; style=&quot;padding-right: 5pt;text-indent: 0pt;line-height: 11pt;text-align: right;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;/table&gt;<br /> <br /> === LOAD CAPACITY STATEMENT MODEL BLB-6000 BATTERY LIFTING BEAM AND BUILT TO STANDARDS ===<br /> <br /> '''LOAD CAPACITY STATEMENT MODEL BLB-6OOO'''<br /> <br /> '''BATTERY LIFTING BEAM'''<br /> <br /> The battery lifting beam model number BLB-6000 has a stat­ed load capacity of 6000# (six thousand). It is designed and tested to meet or exceed any governing rules and regulations pertaining to sufficient factors of safety as well as safety fea­tures when used according to its original intent.<br /> <br /> Any misuse, abuse or modification to said unit voids all fac­tory warranties. As with any lifting device, units should be visually inspected before each use for any signs of damage or wear.<br /> <br /> '''Built To Standards''' <br /> <br /> The BLB-6000 was designed and built to current industry and government standards and guidelines. For more infor­mation see the following.<br /> &lt;ul&gt;<br /> &lt;li&gt;American National Standards Institute (ASME) B30.20&lt;/li&gt;<br /> &lt;li&gt;American National Standards Institute (ASME) B30.20&lt;/li&gt;<br /> &lt;li&gt;Occupational Safety and Health ACT (OSHA) (Standards 29 CFR)&lt;/li&gt;<br /> &lt;/ul&gt;<br /> <br /> ==STATEMENT OF WARRANTY==<br /> <br /> '''Statement of Warranty'''<br /> <br /> [https://store.bhs1.com/warranty Click here] for details on BHS' Statement of Warranty.</div>

Kperrier https://tech.bhs1.com/index.php?title=IOSM-240_BLB&diff=7679 2024-09-10T20:39:14Z

<p>Kperrier: /* STATEMENT OF WARRANTY */</p> <hr /> <div><br /> <br /> '''Looking for a specific replacement part?''' Ctrl-F (or Command-F for Mac users) brings up your browsers search panel and can search any text on the entire web page. Find parts by searching a part # or part description.<br /> <br /> '''Register your equipment with [https://na.bhs1.com/media-library/bhs-optima/ BHS Optima], BHS's free app.'''<br /> <br /> '''California Residents''': WARNING: This product contains chemicals known to the State of California to cause cancer and/or reproductive harm, and birth defects or other reproductive harm. [https://na.bhs1.com/about-bhs/compliance-statement-for-california-proposition-65/ Learn more here.]<br /> <br /> == Battery Lifting Beam (BLB) System Parts &amp; Service Manual ==<br /> ===SAFETY ===<br /> [[File:IOSM-240-BLB-(03-06-07)-2.jpg|700px|border]]<br /> <br /> <br /> === GENERAL SAFETY PRACTICES WHEN HANDLING SUSPENDED LOADS ===<br /> [[File:IOSM-240-BLB-(03-06-07)-3.jpg|500px|right]]<br /> '''GENERAL SAFETY PRACTICES WHEN HANDLING SUSPENDED LOADS'''<br /> <br /> &lt;ol&gt;<br /> <br /> &lt;li&gt;Always lock your elbow and stay at least an arm's length away from the load.&lt;/li&gt;<br /> &lt;li&gt;Position hand at rear of lifting beam to help guide battery.&lt;/li&gt;<br /> &lt;li&gt;Never use your body or limbs to stop a swinging load.&lt;/li&gt;<br /> &lt;li&gt;Be sure feet are not under the battery and are out of the primary danger zone.&lt;/li&gt;<br /> &lt;li&gt;The operator, as required by your company's safety policy and/or O.S.H.A, '''SHALL''' wear the proper safety equipment.&lt;/li&gt;<br /> &lt;li&gt;All lifting apparatus '''SHALL''' be inspected at the beginning of each shift to ensure no damage or defects are present that could pose a safety hazard.&lt;/li&gt;<br /> &lt;li&gt;Areas of travel '''SHALL''' be clear of any trip hazards and obstacles.&lt;/li&gt;<br /> &lt;li&gt;Only trained and authorized personnel '''SHALL''' operate overhead lifting equipment and this battery below-the- hook device.&lt;/li&gt;<br /> &lt;li&gt;The operator '''SHALL''' verity that any load slings or below-the-hook devices are properly secured to the load prior to lifting or moving the load.&lt;/li&gt;<br /> &lt;li&gt;No other persons '''SHALL''' be in the work area or travel path of the load or empty below-the-hook device.&lt;/li&gt;<br /> &lt;li&gt;The operator '''SHALL NOT''' place hands or fingers on hooks.&lt;/li&gt;<br /> &lt;li&gt;The operator '''SHALL NOT''' tilt the below-the-hook device causing the hooks to hang outside the lines of the below-the-hook device.&lt;/li&gt;<br /> &lt;/ol&gt;<br /> <br /> === BATTERY LIFTING BEAM DAILY INSPECTION ===<br /> [[File:IOSM-240-BLB-(03-06-07)-4.jpg|700px|border]]<br /> <br /> '''BATTERY LIFTING BEAM DAILY INSPECTION'''<br /> <br /> Inspections are to be performed: &quot; At the beginning of each shift and/or before first use.&quot; Using a lifting device that is worn or damaged can cause loss of load and possible per­sonal injury or death.<br /> &lt;ol&gt;<br /> &lt;li&gt;Inspect the wood laminate load members for any cracks, splits, indentions, or delamination.&lt;/li&gt;<br /> &lt;li&gt;Inspect all attaching hardware for tightness and wear.&lt;/li&gt;<br /> &lt;li&gt;Inspect hook adjusting trunnions for wear or damage.&lt;/li&gt;<br /> &lt;li&gt;Inspect load pins on battery lift hooks for wear or damage.&lt;/li&gt;<br /> &lt;li&gt;Inspect battery hook engaging throat for excessive wear or damage.<br /> &lt;li&gt;Minimum throat height - 5/8&quot; at center of throat.<br /> &lt;/li&gt;&lt;/li&gt;<br /> &lt;li&gt;Inspect lift &quot;A&quot; plate for excessive wear.<br /> &lt;li&gt;Minimum height - 3/4&quot; at engagement point to hoist.<br /> &lt;/li&gt;&lt;/li&gt;<br /> &lt;/ol&gt;<br /> '''If any of the above conditions do not meet wear and/or dimensional specifications, this device should be removed from service and replaced immediately.'''<br /> <br /> === PROPER HOOK ENGAGEMENT OPERATION ===<br /> <br /> <br /> <br /> '''PROPER HOOK ENGAGEMENT OPERATION'''<br /> <br /> Lower the lifting beam horizontally until the hooks are slightly above the battery eyelets.<br /> <br /> Push the beam forward a few inches to allow the hook farthest from you to pass the outside edge of the battery eyelet.<br /> <br /> Lower the beam until the hook inserts into the eyelet.<br /> <br /> Push down slightly on the heal of the beam closest to you and lower it until the hook can be inserted into the battery eyelet closest to you.<br /> <br /> Lift the beam slightly to engage the hooks complete­ly in the eyelets of the battery.<br /> <br /> Insure both hooks are fully engaged in the battery eyelet.<br /> <br /> Continue to lift and move battery.<br /> <br /> === PROPER HOOK POSITION FOR THE BHS BLB-6000 BATTERY LIFTING BEAM ===<br /> [[File:IOSM-240-BLB-(03-06-07)-6.jpg|500px|none]]<br /> '''PROPER HOOK POSITION FOR THE BHS BLB-6000 BATTERY LIFTING BEAM'''<br /> '''BASIC OPERATION NOTES'''<br /> <br /> Make sure hooks are fully engaged in battery lifting eyelet prior to lifting the battery. Hooks '''SHALL''' be fully inserted into the battery holes as shown in Figure #1<br /> <br /> Hooks '''SHALL''' be spaced equally around the center line of the below-the-hook device and be properly placed in the scalloped adjusting trunnions. Correct positioning of the hooks will allow the battery to be level when lifted.<br /> <br /> Hooks '''SHALL''' be hanging in a vertical position as shown in Figure #1. Do not allow hooks to be tilted inward or outward as in Figures #2 and #3.<br /> <br /> === PRIMARY DANGER ZONES FOR OPERATORS USING BLB-6000 LIFTING BEAM AND GANTRY CRANE ===<br /> [[File:IOSM-240-BLB-(03-06-07)-7.jpg|700px|border]]<br /> <br /> === BLB-6000 ===<br /> [[File:IOSM-240-BLB-(03-06-07)-4.jpg|700px|border]]<br /> <br /> '''BLB-6000'''<br /> <br /> &lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;<br /> <br /> <br /> &lt;table style=&quot;border-collapse:collapse;margin-left:92.8407pt&quot; cellspacing=&quot;0&quot;&gt;&lt;tr style=&quot;height:19pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s128&quot; style=&quot;padding-left: 2pt;text-indent: 0pt;line-height: 11pt;text-align: left;&quot;&gt;I&lt;span style=&quot; color: #1F2020;&quot;&gt;t&lt;/span&gt;e&lt;span style=&quot; color: #1F2020;&quot;&gt;m&lt;/span&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s128&quot; style=&quot;padding-left: 28pt;text-indent: 0pt;line-height: 11pt;text-align: left;&quot;&gt;P&lt;span style=&quot; color: #1F2020;&quot;&gt;Part No.&lt;/span&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s129&quot; style=&quot;padding-left: 26pt;text-indent: 0pt;text-align: left;&quot;&gt;Description&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s128&quot; style=&quot;padding-right: 2pt;text-indent: 0pt;text-align: right;&quot;&gt;Q&lt;span style=&quot; color: #1F2020;&quot;&gt;ty&lt;/span&gt;&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:20pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s130&quot; style=&quot;padding-top: 6pt;padding-left: 7pt;text-indent: 0pt;text-align: left;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-top: 6pt;padding-left: 28pt;text-indent: 0pt;text-align: left;&quot;&gt;24016003&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-top: 7pt;padding-left: 26pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;Wood BLB-6000 Beam&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-top: 8pt;padding-right: 5pt;text-indent: 0pt;line-height: 11pt;text-align: right;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:13pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 8pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 28pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;24015001&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 26pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;Hook Standard&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-right: 5pt;text-indent: 0pt;line-height: 11pt;text-align: right;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:13pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 8pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;3&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 28pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;240&lt;span style=&quot; color: #010101;&quot;&gt;1&lt;/span&gt;6001&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 26pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;Lift Plate - &lt;span style=&quot; color: #333;&quot;&gt;Hook&lt;/span&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-right: 5pt;text-indent: 0pt;line-height: 11pt;text-align: right;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:14pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 8pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;4&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 28pt;text-indent: 0pt;text-align: left;&quot;&gt;240&lt;span style=&quot; color: #010101;&quot;&gt;1&lt;/span&gt;7002&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 26pt;text-indent: 0pt;text-align: left;&quot;&gt;P&lt;span style=&quot; color: #010101;&quot;&gt;l&lt;/span&gt;ate Spanner&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-right: 5pt;text-indent: 0pt;text-align: right;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:15pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 8pt;text-indent: 0pt;text-align: left;&quot;&gt;5&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-top: 1pt;padding-left: 28pt;text-indent: 0pt;text-align: left;&quot;&gt;240&lt;span style=&quot; color: #010101;&quot;&gt;1&lt;/span&gt;7005&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-top: 1pt;padding-left: 26pt;text-indent: 0pt;text-align: left;&quot;&gt;Spacer &lt;span style=&quot; color: #333;&quot;&gt;- &lt;/span&gt;Block&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-top: 1pt;padding-right: 5pt;text-indent: 0pt;text-align: right;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:14pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 8pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;6&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-top: 1pt;padding-left: 28pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;24096001&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s130&quot; style=&quot;padding-top: 1pt;padding-left: 26pt;text-indent: 0pt;line-height: 11pt;text-align: left;&quot;&gt;Trunnion &lt;span style=&quot; color: #1F2020;&quot;&gt;- Aluminum&lt;/span&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-top: 1pt;padding-right: 5pt;text-indent: 0pt;line-height: 11pt;text-align: right;&quot;&gt;4&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:14pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 8pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;7&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 28pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;LB0080&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 26pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;Pin - Spring 1/4&quot; x &lt;span style=&quot; color: #333;&quot;&gt;1 1/2&quot;&lt;/span&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-top: 1pt;padding-right: 5pt;text-indent: 0pt;line-height: 11pt;text-align: right;&quot;&gt;8&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:14pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 8pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;8&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 28pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;LB0060&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 26pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;Straps - Tie&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-right: 5pt;text-indent: 0pt;line-height: 11pt;text-align: right;&quot;&gt;4&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:14pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 8pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;9&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s130&quot; style=&quot;padding-left: 28pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;LB0090&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 26pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;Bol&lt;span style=&quot; color: #010101;&quot;&gt;t &lt;/span&gt;1/2 x 5 NCGR5&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-top: 1pt;padding-right: 5pt;text-indent: 0pt;line-height: 11pt;text-align: right;&quot;&gt;5&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:13pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 2pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;10&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 28pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;HW0111&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 26pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;Washer 1/2 Flat &lt;span style=&quot; color: #333;&quot;&gt;- &lt;/span&gt;Zinc&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s133&quot; style=&quot;padding-right: 5pt;text-indent: 0pt;line-height: 11pt;text-align: right;&quot;&gt;10&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:14pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 2pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;11&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s130&quot; style=&quot;padding-left: 28pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;LB0100&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 26pt;text-indent: 0pt;line-height: 11pt;text-align: left;&quot;&gt;Nut- Lock &lt;span style=&quot; color: #333;&quot;&gt;- &lt;/span&gt;Cone 1/2&quot; x 13&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-right: 5pt;text-indent: 0pt;line-height: 11pt;text-align: right;&quot;&gt;5&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:14pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 2pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;12&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 27pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;00196411&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 26pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;Label Danger - &lt;span style=&quot; color: #333;&quot;&gt;Insure &lt;/span&gt;Engagement&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-top: 1pt;padding-right: 5pt;text-indent: 0pt;line-height: 11pt;text-align: right;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:13pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 2pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;13&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 27pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;00196703&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 26pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;Label &lt;span style=&quot; color: #333;&quot;&gt;- &lt;/span&gt;Capacity 6000 Lbs.&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-right: 5pt;text-indent: 0pt;line-height: 11pt;text-align: right;&quot;&gt;2&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:14pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 2pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;14&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 28pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;LB0070&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 26pt;text-indent: 0pt;line-height: 11pt;text-align: left;&quot;&gt;Screw Wood &lt;span style=&quot; color: #333;&quot;&gt;#10 &lt;/span&gt;x 2 &lt;span style=&quot; color: #333;&quot;&gt;FHWS&lt;/span&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-right: 6pt;text-indent: 0pt;line-height: 11pt;text-align: right;&quot;&gt;12&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:14pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 2pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;15&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 28pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;LB0130&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 26pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;Tag Serial &lt;span class=&quot;s134&quot;&gt;# &lt;/span&gt;&lt;span class=&quot;s135&quot;&gt;- &lt;/span&gt;BLB-6000&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-top: 1pt;padding-right: 6pt;text-indent: 0pt;line-height: 11pt;text-align: right;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:13pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 2pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;16&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 28pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;LB-Inspection La&lt;span style=&quot; color: #010101;&quot;&gt;b&lt;/span&gt;el&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 26pt;text-indent: 0pt;line-height: 11pt;text-align: left;&quot;&gt;Label - Caution - &lt;span style=&quot; color: #333;&quot;&gt;Inspection - &lt;/span&gt;BLB-6000&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-right: 6pt;text-indent: 0pt;line-height: 11pt;text-align: right;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:14pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 2pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;17&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 27pt;text-indent: 0pt;text-align: left;&quot;&gt;00196213&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s131&quot; style=&quot;padding-left: 26pt;text-indent: 0pt;line-height: 12pt;text-align: left;&quot;&gt;Warning Label&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s130&quot; style=&quot;padding-right: 6pt;text-indent: 0pt;line-height: 12pt;text-align: right;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;tr style=&quot;height:13pt&quot;&gt;&lt;td style=&quot;width:49pt&quot;&gt;&lt;p style=&quot;text-indent: 0pt;text-align: left;&quot;&gt;&lt;br&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:133pt&quot;&gt;&lt;p class=&quot;s128&quot; style=&quot;padding-left: 27pt;text-indent: 0pt;line-height: 11pt;text-align: left;&quot;&gt;SP-2400&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:191pt&quot;&gt;&lt;p class=&quot;s129&quot; style=&quot;padding-left: 26pt;text-indent: 0pt;line-height: 11pt;text-align: left;&quot;&gt;Parts &amp; Service Instructions&lt;/span&gt;&lt;/p&gt;&lt;/td&gt;&lt;td style=&quot;width:23pt&quot;&gt;&lt;p class=&quot;s136&quot; style=&quot;padding-right: 5pt;text-indent: 0pt;line-height: 11pt;text-align: right;&quot;&gt;1&lt;/p&gt;&lt;/td&gt;&lt;/tr&gt;&lt;/table&gt;<br /> <br /> === LOAD CAPACITY STATEMENT MODEL BLB-6000 BATTERY LIFTING BEAM AND BUILT TO STANDARDS ===<br /> <br /> '''LOAD CAPACITY STATEMENT MODEL BLB-6OOO'''<br /> <br /> '''BATTERY LIFTING BEAM'''<br /> <br /> The battery lifting beam model number BLB-6000 has a stat­ed load capacity of 6000# (six thousand). It is designed and tested to meet or exceed any governing rules and regulations pertaining to sufficient factors of safety as well as safety fea­tures when used according to its original intent.<br /> <br /> Any misuse, abuse or modification to said unit voids all fac­tory warranties. As with any lifting device, units should be visually inspected before each use for any signs of damage or wear.<br /> <br /> '''Built To Standards''' <br /> <br /> The BLB-6000 was designed and built to current industry and government standards and guidelines. For more infor­mation see the following.<br /> &lt;ul&gt;<br /> &lt;li&gt;American National Standards Institute (ASME) B30.20&lt;/li&gt;<br /> &lt;li&gt;American National Standards Institute (ASME) B30.20&lt;/li&gt;<br /> &lt;li&gt;Occupational Safety and Health ACT (OSHA) (Standards 29 CFR)&lt;/li&gt;<br /> &lt;/ul&gt;<br /> <br /> ==STATEMENT OF WARRANTY==<br /> <br /> '''Statement of Warranty'''<br /> <br /> [https://store.bhs1.com/warranty Click here] for details on BHS' Statement of Warranty.</div>

Kperrier https://tech.bhs1.com/index.php?title=Main_Page&diff=7676 2024-04-02T18:20:05Z

<p>Kperrier: linked to new version of (BE-TS)</p> <hr /> <div>=&lt;big&gt;BHS Product Manuals&lt;/big&gt;=<br /> <br /> == &lt;big&gt;North America&lt;/big&gt; ==<br /> <br /> === Battery Handling Equipment ===<br /> *[[IOP-080 Automatic Transfer Carriage (ATC) Parts &amp; Service Manual|(ATC) Automatic Transfer Carriage - Parts &amp; Service Manual]]<br /> *[[Battery Extractor Series Reports|(BE) Battery Extractor Series - Planned Maintenance Inspection Reports]]<br /> *[[IOP-403 BE-36-1-SS|(BE-SS) Single Side Battery Extractor - Parts &amp; Service Manual]]<br /> *[[(BE-SL &amp; -DS) Single Level &amp; Double Stack Operator Aboard Battery Extractors – Parts &amp; Service Manual (IOP-400)|(BE-SL&amp;DS) Single Level and Double Stack Operator Aboard Battery Extractors - Parts &amp; Service Manual]]<br /> *[[IOP-406SLN&amp;DSN|(BE-SLN &amp; DSN) Single Level and Double Stack Competitor Replacement Battery Extractors - Parts &amp; Service Manual]]<br /> <br /> *[[(BE-TS) Triple Stack Operator Aboard Battery Extractors – Parts &amp; Service Manual (IOP-401)|(BE-TS) Triple Stack Operator Aboard Battery Extractors - Parts &amp; Service Manual]]<br /> *[[IOP-407 BE-TSN|(BE-TSN) Triple Stack Competitor Replacement Battery Extractors - Parts &amp; Service Manual]]<br /> <br /> *[[IOP-402 BE-QS|(BE-QS) Quad Stack Operator Aboard Battery Extractors - Parts &amp; Service Manual]]<br /> *[[IOSM-240 BLB|(BLB) Battery Lifting Beam - Parts &amp; Service Manual]]<br /> *[[IOP-128 BT16-2|(BT16-2) Bridge Trolley - Parts &amp; Service Manual]]<br /> *[[IOP-050 BTC|(BTC) Battery Transfer Carriage - Parts &amp; Service Manual]]<br /> *[[IOM-421 BWC-1|(BWC-1) Battery Wash Cabinet with Manual Door &amp; Gravity Feed Rollers - Parts &amp; Service Manual]]<br /> *[[IOM-422 BWC-2 &amp; BWC-3|(BWC-2 &amp; BWC-3) Battery Wash Cabinet with Automatic Door &amp; Powered Rollers - Parts &amp; Service Manual]]<br /> <br /> *[[Fleet Tracker User Manual|(FLT) Fleet Tracker User Manual]]<br /> <br /> *[[Fleet_Tracker_IIOT_User_Manual |(FLT-IIOT) Fleet Tracker – IIOT - User Manual]]<br /> *[https://tech.bhs1.com/index.php/IOP-495_FST-330_Operating_Instructions (FST-330) Battery Watering &amp; Filling System Tank Operating Instructions]<br /> *[[IOP-350 (MBE-42)|(MBE-42) Mobile Battery Extractor - Parts &amp; Service Manual]]<br /> *[[IOP-146 PGC-PDC|(PGC-PDC) Power Drive Gantry Crane - Parts &amp; Service Manual]]<br /> *[[IOP-425 RNS-1|(RNS-1) Recirculation/Neutralization System, 125 Gallon - Parts &amp; Service Manual]]<br /> <br /> *[[IOP-426 RNS-4-SS|(RNS-4-SS) Recirculation/Neutralization System, Stainless Steel, 200 Gallon, Auto pH Monitoring - Parts &amp; Service Manual]]<br /> <br /> *[[IOP-427 RNS-3-SS|(RNS-3-SS) Recirculation/Neutralization System, Stainless Steel, 200 Gallon - Parts &amp; Service Manual]]<br /> <br /> *[[IOM-078 WTC |(WTC) Walkie Transfer Carriage - Parts &amp; Service Manual]]<br /> <br /> === Material Handling Equipment ===<br /> <br /> *[[IOP-29401001 Lift Table Ladder|(LTL) Lift Table Ladder - Parts &amp; Service Manual]]<br /> * [https://tech.bhs1.com/index.php/IOP-276_MMLT (MMLT) Mobile Manual Lift Table - Parts &amp; Service Manual]<br /> * [https://tech.bhs1.com/index.php/IOP-PCP-P_Manual#Pallet_Carousel_%26_Positioner_with_Self-Leveling_Pneumatic_Airbag_-_Parts_%26_Service_Manual (PCP-P) Pallet Carousel &amp; Positioner with Self-Leveling Pneumatic Airbag]<br /> * [https://tech.bhs1.com/index.php/IOP-60701004_Powered_Dock_Gate (PDG) Powered Dock Gate - Parts &amp; Service Manual]<br /> * [[IOP-265 SRD|(SRD) Shipping and Receiving Desk - Parts &amp; Service Manual]]<br /> * [https://tech.bhs1.com/index.php/IOP-TCD-1_Manual (TCD) Tilt Cart Dumper - Parts &amp; Service Manual]<br /> * [[IOP-620 - YARD RAMP|(YR) Yard Ramp - Parts &amp; Service Manual]]<br /> <br /> === Electrical Handling Equipment ===<br /> <br /> * [[IOP-SWT|(SWT) Spool Winding Trolley - Operational Manual]]<br /> <br /> *[[IOP-ORL OPERATING INSTRUCTIONS|(ORL) Overhead Reel Lifter - Operating Instructions]]<br /> <br /> *[[IOP-RHA OPERATING INSTRUCTIONS|(RHA) Reel Handler Attachment - Operating Instructions]]<br /> <br /> == &lt;big&gt;International&lt;/big&gt; ==<br /> <br /> === Battery Handling Equipment ===</div>

Kperrier https://tech.bhs1.com/index.php?title=(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)&diff=7675 2024-04-02T18:16:20Z

<p>Kperrier: /* Water Cart */</p> <hr /> <div>'''Looking for a specific replacement part?''' Ctrl-F (or Command-F for Mac users) brings up your browsers search panel and can search any text on the entire web page. Find parts by searching a part # or part description.<br /> <br /> '''Register your equipment with [https://na.bhs1.com/media-library/bhs-optima/ BHS Optima], BHS's free app.'''<br /> <br /> '''California Residents''': WARNING: This product contains chemicals known to the State of California to cause cancer and/or reproductive harm, and birth defects or other reproductive harm. [https://na.bhs1.com/about-bhs/compliance-statement-for-california-proposition-65/ Learn more here.]<br /> =&lt;big&gt;Preface&lt;/big&gt;=<br /> =&lt;big&gt;TP-606 – Safety &amp; De-Energization Procedures&lt;/big&gt;=<br /> ==&lt;big&gt;General Safety&lt;/big&gt;==<br /> {|<br /> |[[File:Read Before Operating Notice.png|alt=Read Before Operating|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:Read_Before_Operating_Notice.png]]<br /> |<br /> *Read and understand all instructions and warnings before using or servicing this equipment.<br /> *Keep these instructions for future reference.<br /> |}<br /> *Battery Extractor (BE) units shall only be operated by suitable persons of at least 18 years of age, who have been trained in the proper and safe operation of the BE and expressly certified/charged, in writing, by the user or their representative.<br /> *Only one person is permitted to travel on the BE at any time.<br /> *BE units shall only be used indoors in an industrial setting on a hard, nonslip, and level floor without defects including but not limited to holes, gouges, cracks, drains or obstacles comprised of concrete or other suitable industrial material meeting the minimum requirements specified by BHS as well as any local requirements.<br /> *A licensed structural engineer should be consulted prior to installing a BE on any building level other than the ground floor.<br /> *BE units are not designed to be shipped or transported after initial delivery.<br /> *Failure to follow these instructions and warnings may result in property damage, personal injury or death.<br /> ===&lt;big&gt;&lt;u&gt;Work Area&lt;/u&gt;&lt;/big&gt;===<br /> *Keep work area clean and well lit. Cluttered work areas and poor lighting can lead to accidents.<br /> *Clean up/contain any fluid spills immediately to prevent slips or falls.<br /> *Be aware of potential hazards when performing any service or maintenance to the unit.<br /> ===&lt;big&gt;&lt;u&gt;Service &amp; Maintenance&lt;/u&gt;&lt;/big&gt;===<br /> Service personnel shall wear Personal Protective Equipment (PPE) appropriate for the task being performed.<br /> {|<br /> |[[File:Electrical Hazard Warning.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Electrical_Hazard_Warning.png]]<br /> [[File:Danger Warning.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Danger_Warning.png|alt=DANGER]]<br /> |<br /> ===&lt;big&gt;&lt;u&gt;Lockout/Tagout&lt;/u&gt;&lt;/big&gt;===<br /> '''Lockout/tagout the BE per your corporate policy, if damaged or not functioning properly. Lockout/tagout and de-energize all systems prior to performing any maintenance or service to unit.'''<br /> |}<br /> {|<br /> |[[File:Warning-Battery-Explosion.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Warning-Battery-Explosion.png]]<br /> [[File:Danger Warning.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Danger_Warning.png|alt=DANGER]]<br /> |<br /> ===&lt;big&gt;&lt;u&gt;Lead-Acid Battery Explosion Hazard&lt;/u&gt;&lt;/big&gt;===<br /> '''DO NOT allow open flames or sparks of any kind near a battery. Highly explosive gas is generated when charging a battery that can remain in battery cells for extended periods of time after charging is complete.'''<br /> *Always wear appropriate PPE including rubber apron, gloves, boots and full face shield when performing service or maintenance to any lead-acid batteries.<br /> *DO NOT place metal or other conductive objects on top of battery. Arcing may occur causing damage to the battery and/or serious personal injury or death.<br /> *Use only chargers matching the voltage and amperage of the battery being charged. Overcharging a battery can cause damage to the battery, charger and/or serious personal injury or death.<br /> *Turn off charger before disconnecting battery from charger. Arcing between battery and charger connectors can cause damage to the connectors and/or serious personal injury or death.<br /> |}<br /> {|<br /> |[[File:Warning-Hydrualic-Hazard.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Warning-Hydrualic-Hazard.png]]<br /> [[File:Warning.png|alt=WARNING|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Warning.png]]<br /> |<br /> ===&lt;big&gt;&lt;u&gt;Hydraulic Hazards&lt;/u&gt;&lt;/big&gt;===<br /> '''AVOID HIGH PRESSURE FLUIDS-Escaping fluid under pressure can penetrate the skin causing serious injury. Relieve pressure before disconnecting hydraulic lines. Tighten all connections before applying pressure. Keep hands and body away from pin holes which eject fluids under high pressure. Use a piece of cardboard or paper to search for leaks. DO NOT use your hand.'''<br /> <br /> '''Any fluid injected into the skin under high pressure should be considered a serious medical emergency despite an initial normal appearance of the skin. There will be a delayed onset of pain, and serious tissue damage may occur. Medical attention should be sought immediately.'''<br /> |}<br /> {|<br /> ![[File:No Pacemakers Notice.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:No_Pacemakers_Notice.png]][[File:Strong Magnet Field Hazard Warning.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Strong_Magnet_Field_Hazard_Warning.png]]<br /> [[File:Warning.png|alt=WARNING|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Warning.png]]<br /> |<br /> ===&lt;big&gt;&lt;u&gt;Electromagnet Hazard&lt;/u&gt;&lt;/big&gt;===<br /> '''Units equipped with magnetic extraction generate strong magnetic fields. Persons with pacemakers &lt;u&gt;SHOULD&lt;/u&gt;''' &lt;u&gt;'''NOT'''&lt;/u&gt; '''operate or be in close proximity to equipment during operation.'''<br /> <br /> '''Failure to comply with this direction''' '''could result in serious personal injury or death.'''<br /> |}<br /> ===&lt;big&gt;&lt;u&gt;Operational Safety&lt;/u&gt;&lt;/big&gt;===<br /> *Only personnel trained in the proper and safe operation of BE units may operate or service the BE.<br /> *Operators shall wear appropriate PPE suitable for working with industrial lead-acid batteries while operating the BE ''(See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Lead-Acid_Battery_Explosion_Hazard Lead-Acid Battery Explosion Hazard] section).''<br /> *All data plates, warning labels, placards, etc. shall be in place and legible at all times. Contact BHS for re-placement data plates, warning labels, placards or instructions.<br /> *All users and service personnel shall be familiar with the meaning and risks associated with all data plates, warning labels, etc.<br /> *All operators and service personnel shall be aware of potential crush and shear points while operating or servicing the BE.<br /> *Keep hands and arms inside the operator compartment while operating the BE.<br /> *Remove BE from service if damaged, defective, or operating improperly (or becomes such while operating) until repairs can be made to correct any problem(s).<br /> *All operators shall be aware of the location of the end stops in the travel path to prevent driving the BE into the end stops.<br /> ===&lt;u&gt;&lt;big&gt;Do's and Don'ts&lt;/big&gt;&lt;/u&gt;===<br /> *'''DO NOT''' exceed the maximum capacity of the BE.<br /> *'''DO NOT''' modify or fit the BE with attachments without prior, written approval from BHS.<br /> *'''DO NOT''' perform any maintenance or service to the BE with a battery loaded on the BE.<br /> *'''DO NOT''' allow anyone to ride in or on the BE.<br /> *'''DO NOT''' operate the BE with any guard or cover removed unless required for maintenance or repair.<br /> *Disconnect the BE from all power sources before attempting to perform service or maintenance to the unit.<br /> *'''DO NOT''' drive the BE into the end stops.<br /> *'''DO NOT''' operate the BE if disengaged from the guidance track.<br /> *'''DO NOT''' allow a battery to exit the BE when a lift truck or battery stand is not present to accept the battery.<br /> *'''DO NOT''' rotate the arm onto a battery such that any part of the extractor arm, vacuum cup or magnet contacts the top of the battery.<br /> *'''DO NOT''' allow anyone to enter the area under the carriage without the service stands properly installed.<br /> *'''DO NOT''' use the BE in a manner for which it is not intended. Some examples of prohibited use are but not limited to:<br /> **To transport people<br /> **As a vehicle jack<br /> **To lift loads greater than its rated load capacity<br /> **Where unintentional movement may exist<br /> **Having direct contact with foodstuffs<br /> **In a potentially explosive atmosphere<br /> ==&lt;big&gt;De-Energization&lt;/big&gt;==<br /> 1. Fully lower the BE roller bed or position the roller bed on service stands if service requires the bed be raised. See Figures 1 &amp; 2.<br /> {|<br /> |[[File:WARNING-warn.png|alt=WARNING|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:WARNING-warn.png]]<br /> !Failure to properly support the roller bed when performing service under the BE could result in injury from the roller bed lowering unexpectedly.<br /> |}[[File:IOP-400 BE-SL&amp;DS (10-23) Fully Lower BE Roller Bed.png|alt=Fully lowered BE roller bed|none|thumb|FIGURE 1|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Fully_Lower_BE_Roller_Bed.png]][[File:IOP-400 BE-SL&amp;DS (10-23) BE Roller Bed on Service Stands .png|alt=Raised BE roller bed positioned on service stands|none|thumb|FIGURE 2|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_BE_Roller_Bed_on_Service_Stands_.png]]2. Turn key on dashboard to the “OFF” position. See Figure 3.[[File:IOP-400 BE-SL&amp;DS (10-23) De-Energization Figure 3.png|alt=Key on BE dashboard turned to the “OFF” position.|none|thumb|FIGURE 3|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_De-Energization_Figure_3.png]]3. Disconnect power to the extractor or shut off the electrical branch circuit breaker.<br /> {|<br /> |[[File:Danger Warning.png|alt=DANGER|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Danger_Warning.png]]<br /> |'''Failure to disconnect electrical power to the BE could result in electrical shock. Serious personal injury or death will occur.'''<br /> |}4. Actuate all hydraulic levers in both directions to re-lease any stored hydraulic pressure. See Figure 4.<br /> {|<br /> |[[File:WARNING-warn.png|alt=WARNING|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:WARNING-warn.png]]<br /> |'''Failure to release any stored hydraulic pres-sure could result in injury from:'''<br /> *'''Escaping hydraulic fluid under high pressure (see ''[https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Hydraulic_Hazards HYDRAULIC HAZARDS]'' in the ''[https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#General_Safety GENERAL SAFETY]'' section).'''<br /> *'''Unexpected movement of hydraulic components.'''<br /> |}[[File:IOP-400 BE-SL&amp;DS (10-23) Actuate all Hydraulic Levers in Both Directions.png|alt=Actuate all hydraulic levers in both directions to release any stored hydraulic pressure.|none|thumb|FIGURE 4|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Actuate_all_Hydraulic_Levers_in_Both_Directions.png]]<br /> ==&lt;big&gt;Labels &amp; Placards&lt;/big&gt;==<br /> '''Operators should be familiar with the meaning of the following labels and placards found on the BE to ensure proper and safe operation.'''<br /> {| class=&quot;wikitable&quot;<br /> |-<br /> ![[File:Read Before Operating Notice.png|alt=Read Before Operating|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Read_Before_Operating_Notice.png]]<br /> |'''Read and understand instruction manual prior to use.'''<br /> |-<br /> ![[File:Lockout-Before-Servicing-Notice.png|alt=Lockout Before Servicing Unit|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Lockout-Before-Servicing-Notice.png]]<br /> |'''Lockout before servicing.'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Extractor Arm Positioning Arrows.png|alt=BE-SL &amp; BE-DS Extractor Arm Positioning Arrows|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Extractor_Arm_Positioning_Arrows.png]]<br /> |'''Extractor arm positioning arrows'''<br /> |-<br /> ![[File:Do Not Operate Without Guards or Covers Notice.png|alt=DO NOT Operate Without Guards or Covers Notice|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Do_Not_Operate_Without_Guards_or_Covers_Notice.png]]<br /> |'''DO NOT operate with guards or covers removed'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) No Riders Allowed.png|alt=No riders allowed|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_No_Riders_Allowed.png]]<br /> |'''NO riders allowed.'''<br /> |-<br /> ![[File:No Pacemakers Notice.png|alt=DO NOT operate by or in close proximity to people with pacemakers.|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:No_Pacemakers_Notice.png]]<br /> |'''DO NOT operate by or in close proximity to people with pacemakers.'''<br /> |-<br /> ![[File:Strong Magnet Field Hazard Warning.png|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Strong_Magnet_Field_Hazard_Warning.png]]<br /> [[File:Warning.png|alt=WARNING|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Warning.png]]<br /> |'''Strong Magnet Field Hazard'''<br /> *Attraction between magnet and metallic objects can crush.<br /> *Keep unsecured metallic objects away from magnet.<br /> *De-energize and lockout/tagout before servicing.<br /> |-<br /> ![[File:Chain Entanglement Hazard Warning.png|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Chain_Entanglement_Hazard_Warning.png]]<br /> [[File:Warning.png|alt=WARNING|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Warning.png]]<br /> |'''Chain Entanglement Hazard'''<br /> *Moving chains and sprockets can crush and cut.<br /> *Keep hands and fingers clear. Do not operate with guards removed.<br /> *De-energize and lockout/tagout before servicing.<br /> |-<br /> ![[File:Electrical Hazard Warning.png|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Electrical_Hazard_Warning.png]]<br /> [[File:Danger Warning.png|alt=DANGER|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Danger_Warning.png]]<br /> |'''Electrical Hazard'''<br /> *Energized components can cause electrical shock.<br /> *De-energize and lockout/tagout before servicing.<br /> |-<br /> ![[File:BE-SL and BE-DS Power Off-On.png|alt=BE-SL and BE-DS Power Off-On|frameless|180x180px|link=https://tech.bhs1.com/index.php/File:BE-SL_and_BE-DS_Power_Off-On.png]]<br /> |'''Power Off/On'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Horn Control.png|alt=BE-SL and BE-DS Horn Control |frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Horn_Control.png]]<br /> |'''Horn (If equipped)'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Vacuum Control.png|alt=BE-SL and BE-DS Vacuum Control |frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Vacuum_Control.png]]<br /> |'''Vacuum Off/On (If equipped)'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Magnet Extraction.png|alt=BE-SL and BE-DS Magnet Off/On|frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Magnet_Extraction.png]]<br /> |'''Magnet Off/On (If equipped)'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Powered Roller Cut Off Override.png|alt=BE-SL and BE-DS Powered Roller Cut Off Override|frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Powered_Roller_Cut_Off_Override.png]]<br /> |'''Powered Roller Cutout Override (If equipped)'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Rack-Level-Assist.png|alt=BE-SL and BE-DS Rack Level Assist |frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Rack-Level-Assist.png]]<br /> |'''Rack Level Assist Indicator (If equipped)'''<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> ! rowspan=&quot;3&quot; |[[File:IOP-400_BE-SL&amp;DS_(10-23)_Power_Rollers_and_Arm_Travel.png.png|alt=BE-SL &amp; DS Powered Roller and Arm Travel Controls|frameless|504x504px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Power_Rollers_and_Arm_Travel.png.png]]<br /> |'''Far Power Rollers'''<br /> |-<br /> |'''Arm Travel'''<br /> |-<br /> |'''Near Power Rollers'''<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> |+''BE-SL &amp; DS UNITS ONLY''<br /> ! colspan=&quot;3&quot; |[[File:IOP-400 BE-SL&amp;DS (10-23) BE-SL&amp;DS Units Platform Controls.png|alt=BE-SL &amp; DS Specific Controls|frameless|460x460px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_BE-SL&amp;DS_Units_Platform_Controls.png]]<br /> |-<br /> |Drive Forward/Reverse<br /> |Platform Raise/Lower<br /> |Arm Rotation Near/Far<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> |+''BE-TS &amp; QS UNITS ONLY''<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) BE-TS &amp; BE-QS Platform Raise and Lower Controls.png|alt=BE-TS &amp; BE-QS Platform Raise and Lower Controls|frameless|240x240px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_BE-TS_&amp;_BE-QS_Platform_Raise_and_Lower_Controls.png]]<br /> ! colspan=&quot;2&quot; |[[File:IOP-400 BE-SL&amp;DS (10-23)BE-TS &amp; BE-QS Specific Controls.png|alt=BE-TS &amp; BE-QS Specific-Controls|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)BE-TS_&amp;_BE-QS_Specific_Controls.png]]<br /> |-<br /> |Platform Raise/Lower<br /> |Drive Foward/Reverse<br /> |Arm Rotation Near/Far<br /> |}<br /> =&lt;big&gt;General Information&lt;/big&gt;=<br /> ==&lt;big&gt;Specification Data&lt;/big&gt;==<br /> [[File:BE-TS Specification Data.png|alt=IOP-401 BE-TS (10-23) Specification Data|frameless|600x600px]]<br /> {| class=&quot;wikitable&quot;<br /> | colspan=&quot;2&quot; |<br /> !BE-24-2-TS<br /> !BE-36-2-TS<br /> !BE-42-2-TS<br /> |-<br /> !A<br /> |Overall Length<br /> |156.5&quot;<br /> |180.5&quot;<br /> |192.5&quot;<br /> |-<br /> !B<br /> |Overall Width<br /> |72&quot;<br /> |72&quot;<br /> |72&quot;<br /> |-<br /> !C<br /> |Overall Height (Lowered)<br /> |158.188&quot;<br /> |158.188&quot;<br /> |160.688&quot;<br /> |-<br /> !<br /> |Overall Height (Raised w/ Overhead Guard)<br /> |182.375&quot;<br /> |182.375&quot;<br /> |182.375&quot;<br /> |-<br /> !<br /> |Overall Height (Raised w/ Strobe &amp; Alarm)<br /> |191.75&quot;<br /> |191.75&quot;<br /> |191.75&quot;<br /> |-<br /> !D<br /> |Wheel Base<br /> |98&quot;<br /> |122&quot;<br /> |134&quot;<br /> |-<br /> !E<br /> |Drive Wheel Center line<br /> |51&quot;<br /> |51&quot;<br /> |51&quot;<br /> |-<br /> !F<br /> |Battery Compartment Width<br /> |24&quot;<br /> |36&quot;<br /> |42&quot;<br /> |-<br /> !G<br /> |Ground Clearance<br /> |.625&quot;<br /> |.625&quot;<br /> |.625&quot;<br /> |-<br /> !H<br /> |Minimum Roller Height<br /> |6.5&quot;<br /> |6.5&quot;<br /> |6.5&quot;<br /> |-<br /> !I<br /> |Maximum Roller Height<br /> |96&quot;<br /> |96&quot;<br /> |96&quot;<br /> |-<br /> !J<br /> |Operator Platform Height (Lowered/Raised)<br /> |11&quot; / 103&quot;<br /> |11&quot; / 103&quot;<br /> |11&quot; / 103&quot;<br /> |}<br /> <br /> === UNITS WITH 10 HP POWER UNIT USED PRIOR TO DECEMBER, 2014 ===<br /> {| class=&quot;wikitable&quot;<br /> !<br /> !BE-24-2-TS<br /> !BE-36-2-TS<br /> !BE-42-2-TS<br /> |-<br /> |Travel Speed<br /> |0 to 190 ft/min / 0 to 0.97 m/s<br /> |0 to 190 ft/min / 0 to 0.97 m/s<br /> |0 to 190 ft/min / 0 to 0.97 m/s<br /> |-<br /> |Raise - Lower Speed<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |-<br /> |Powered Roller Speed<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |-<br /> |Arm Traverse Speed<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |-<br /> |Arm Rotation Time<br /> |6 s to 8 s<br /> |6 s to 8 s<br /> |6 s to 8 s<br /> |-<br /> |Draw Bar Pull / Vacuum<br /> <br /> (12&quot; / 305 mm Round Cup)<br /> |1,000 lb / 454 kg<br /> |1,000 lb / 454 kg<br /> |1,000 lb / 454 kg<br /> |-<br /> |Draw Bar Pull Magnet*<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |-<br /> |Vacuum Attach Time<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |-<br /> |Vacuum Release Time<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |-<br /> |Input Voltage<br /> |480 V / 3 ph / 60Hz<br /> |480 V / 3 ph / 60Hz<br /> |480 V / 3 ph / 60Hz<br /> |-<br /> |AC Current Draw<br /> |16.5 A<br /> |16.5 A<br /> |16.5 A<br /> |-<br /> |Control Circuit Voltage<br /> |120 V ac<br /> |120 V ac<br /> |120 V ac<br /> |-<br /> |Hydraulic Power Unit<br /> |10 hp / 7.46 kW<br /> |10 hp / 7.46 kW<br /> |10 hp / 7.46 kW<br /> |-<br /> |Hydraulic Pump<br /> |16 gal/min / 61 L/min<br /> |16 gal/min / 61 L/min<br /> |16 gal/min / 61 L/min<br /> |-<br /> |Power Unit<br /> |Hydraulic, Variable Displacement<br /> |Hydraulic, Variable Displacement<br /> |Hydraulic, Variable Displacement<br /> |-<br /> |Operating Pressure<br /> |1,500 psi / 103 bar<br /> |1,500 psi / 103 bar<br /> |1,500 psi / 103 bar<br /> |-<br /> |Vacuum Pump<br /> |1/3 hp / 0.25 kW<br /> |1/3 hp / 0.25 kW<br /> |1/3 hp / 0.25 kW<br /> |-<br /> |Vacuum<br /> |21&quot; Hg / 711 mbar<br /> |21&quot; Hg / 711 mbar<br /> |21&quot; Hg / 711 mbar<br /> |-<br /> |Full Load Capacity<br /> |10,000 lb / 4535 kg<br /> |10,000 lb / 4535 kg<br /> |10,000 lb / 4535 kg<br /> |-<br /> |Weight (Empty)<br /> |8,000 lb / 3629 kg<br /> |8,300 lb / 3765 kg<br /> |8,600 lb / 3901 kg<br /> |-<br /> |Total Compartment Rollers / Powered<br /> |11/5<br /> |11/5<br /> |11/5<br /> |-<br /> |Guide Track<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |-<br /> |Overall Dimensions (L x W x H)<br /> |156.5&quot; x 72&quot; x 158.188&quot;<br /> <br /> 3975 mm x 1829 mm x 4018 mm<br /> |180.5&quot; x 72&quot; x 158.188&quot;<br /> <br /> 4585 mm x 1829 mm x 4018 mm<br /> |192.5&quot; x 72&quot; x 160.688&quot;<br /> <br /> 4890 mm x 1829 mm x 4081 mm<br /> |-<br /> |Vacuum Arm Reach<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |-<br /> |Vacuum Arm Reach (Hydraulic Extension)<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |-<br /> |Magnet Arm Reach (Hydraulic Extension) Truck Side<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |-<br /> |Wheel Base<br /> |98&quot; / 2489 mm<br /> |122&quot; / 3099 mm<br /> |134&quot; / 3404 mm<br /> |-<br /> |Drive Wheel Center Line<br /> |51&quot; / 1295 mm<br /> |51&quot; / 1295 mm<br /> |51&quot; / 1295 mm<br /> |-<br /> |Battery Compartment Width<br /> |24&quot; / 610 mm<br /> |36&quot; / 915 mm<br /> |42&quot; / 1067 mm<br /> |-<br /> |Maximum Battery Dimensions<br /> <br /> (L x W x H)<br /> |48&quot; x 23&quot; x 34&quot;<br /> <br /> 1219 mm x 584 mm x 864 mm<br /> |48&quot; x 35&quot; x 34&quot;<br /> <br /> 1219 mm x 889 mm x 864 mm<br /> |48&quot; x 41&quot; x 34&quot;<br /> <br /> 1219 mm x 1041 mm x 864 mm<br /> |-<br /> |Minimum Battery Width<br /> <br /> (with vacuum / magnet)<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |-<br /> |Minimum Battery Height<br /> |17.75&quot; / 451 mm<br /> |17.75&quot; / 451 mm<br /> |17.75&quot; / 451 mm<br /> |-<br /> |Ground Clearance<br /> |0.63&quot; / 16 mm<br /> |0.63&quot; / 16 mm<br /> |0.63&quot; / 16 mm<br /> |-<br /> |Roller Height<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |-<br /> ! colspan=&quot;4&quot; |NOTES<br /> |-<br /> | colspan=&quot;4&quot; |''Specifications may vary ± 5% because of temperature, floor considerations, and operator efficiency. Values represented under normal operating conditions.''<br /> |-<br /> | colspan=&quot;4&quot; |''* Varies with battery case thickness and condition.''<br /> |}<br /> <br /> === UNITS WITH 20 HP POWER UNIT USED DECEMBER, 2014 TO PRESENT ===<br /> {| class=&quot;wikitable&quot;<br /> !<br /> !BE-24-2-TS<br /> !BE-36-2-TS<br /> !BE-42-2-TS<br /> |-<br /> |Travel Speed<br /> |0 to 240 ft/min / 0 to 1.22 m/s<br /> |0 to 240 ft/min / 0 to 1.22 m/s<br /> |0 to 240 ft/min / 0 to 1.22 m/s<br /> |-<br /> |Raise - Lower Speed<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |-<br /> |Powered Roller Speed<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |-<br /> |Arm Traverse Speed<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |-<br /> |Arm Rotation Time<br /> |6 s to 8 s<br /> |6 s to 8 s<br /> |6 s to 8 s<br /> |-<br /> |Draw Bar Pull / Vacuum<br /> <br /> (12&quot; / 305 mm Round Cup)<br /> |1,000 lb / 454 kg<br /> |1,000 lb / 454 kg<br /> |1,000 lb / 454 kg<br /> |-<br /> |Draw Bar Pull Magnet*<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |-<br /> |Vacuum Attach Time<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |-<br /> |Vacuum Release Time<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |-<br /> |Input Voltage<br /> |480 V / 3 ph / 60Hz<br /> |480 V / 3 ph / 60Hz<br /> |480 V / 3 ph / 60Hz<br /> |-<br /> |AC Current Draw<br /> |35 A<br /> |35 A<br /> |35 A<br /> |-<br /> |AC Current Draw w/ Electric Drive Option<br /> |42 A<br /> |42 A<br /> |42 A<br /> |-<br /> |Control Circuit Voltage<br /> |120 V ac<br /> |120 V ac<br /> |120 V ac<br /> |-<br /> |Hydraulic Power Unit<br /> |20 hp / 14.9 kW<br /> |20 hp / 14.9 kW<br /> |20 hp / 14.9 kW<br /> |-<br /> |Hydraulic Power Unit w/ Electric Drive Option<br /> |25 hp / 18.7 kW<br /> |25 hp / 18.7 kW<br /> |25 hp / 18.7 kW<br /> |-<br /> |Hydraulic Pump<br /> |22 gal/min / 83 L/min<br /> |22 gal/min / 83 L/min<br /> |22 gal/min / 83 L/min<br /> |-<br /> |Power Unit<br /> |Hydraulic, Variable Displacement<br /> |Hydraulic, Variable Displacement<br /> |Hydraulic, Variable Displacement<br /> |-<br /> |Operating Pressure<br /> |1,500 psi / 103 bar<br /> |1,500 psi / 103 bar<br /> |1,500 psi / 103 bar<br /> |-<br /> |Vacuum Pump<br /> |1/3 hp / 0.25 kW<br /> |1/3 hp / 0.25 kW<br /> |1/3 hp / 0.25 kW<br /> |-<br /> |Vacuum<br /> |21&quot; Hg / 711 mbar<br /> |21&quot; Hg / 711 mbar<br /> |21&quot; Hg / 711 mbar<br /> |-<br /> |Full Load Capacity<br /> |10,000 lb / 4535 kg<br /> |10,000 lb / 4535 kg<br /> |10,000 lb / 4535 kg<br /> |-<br /> |Weight (Empty)<br /> |8,000 lb / 3629 kg<br /> |8,300 lb / 3765 kg<br /> |8,600 lb / 3901 kg<br /> |-<br /> |Total Compartment Rollers / Powered<br /> |11/5<br /> |11/5<br /> |11/5<br /> |-<br /> |Guide Track<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |-<br /> |Overall Dimensions (L x W x H)<br /> |156.5&quot; x 72&quot; x 158.188&quot;<br /> <br /> 3975 mm x 1829 mm x 4018 mm<br /> |180.5&quot; x 72&quot; x 158.188&quot;<br /> <br /> 4585 mm x 1829 mm x 4018 mm<br /> |192.5&quot; x 72&quot; x 160.688&quot;<br /> <br /> 4890 mm x 1829 mm x 4081 mm<br /> |-<br /> |Vacuum Arm Reach<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |-<br /> |Vacuum Arm Reach (Hydraulic Extension)<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |-<br /> |Magnet Arm Reach (Hydraulic Extension) Truck Side<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |-<br /> |Wheel Base<br /> |98&quot; / 2489 mm<br /> |122&quot; / 3099 mm<br /> |134&quot; / 3404 mm<br /> |-<br /> |Drive Wheel Center Line<br /> |51&quot; / 1295 mm<br /> |51&quot; / 1295 mm<br /> |51&quot; / 1295 mm<br /> |-<br /> |Battery Compartment Width<br /> |24&quot; / 610 mm<br /> |36&quot; / 915 mm<br /> |42&quot; / 1067 mm<br /> |-<br /> |Maximum Battery Dimensions<br /> <br /> (L x W x H)<br /> |48&quot; x 23&quot; x 34&quot;<br /> <br /> 1219 mm x 584 mm x 864 mm<br /> |48&quot; x 35&quot; x 34&quot;<br /> <br /> 1219 mm x 889 mm x 864 mm<br /> |48&quot; x 41&quot; x 34&quot;<br /> <br /> 1219 mm x 1041 mm x 864 mm<br /> |-<br /> |Minimum Battery Width<br /> <br /> (with vacuum / magnet)<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |-<br /> |Minimum Battery Height<br /> |17.75&quot; / 451 mm<br /> |17.75&quot; / 451 mm<br /> |17.75&quot; / 451 mm<br /> |-<br /> |Ground Clearance<br /> |0.63&quot; / 16 mm<br /> |0.63&quot; / 16 mm<br /> |0.63&quot; / 16 mm<br /> |-<br /> |Roller Height<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |-<br /> ! colspan=&quot;4&quot; |NOTES<br /> |-<br /> | colspan=&quot;4&quot; |''Specifications may vary ± 5% because of temperature, floor considerations, and operator efficiency. Values represented under normal operating conditions.''<br /> |-<br /> | colspan=&quot;4&quot; |''* Varies with battery case thickness and condition.''<br /> |}<br /> ==&lt;big&gt;Pre-Installation Check&lt;/big&gt;==<br /> ===&lt;big&gt;&lt;u&gt;Floor Conditions&lt;/u&gt;&lt;/big&gt;===<br /> The floor is the single most critical area of the battery room.  A bad floor can cause significant issues with the installation as well as downtime and maintenance problems with the extractor.  The floor should be verified as to its minimum thickness and strength with user.  As noted on the drawing, the specific requirement of flatness for your particular type of system is listed. Below is a chart stating floor requirements.  If possible, especially on double stack and higher systems, a digital level should be used to shoot the grade for compliance with the specification.  The floor should also be inspected for severe cracks or excessively wide expansion joints in the travel path of the machine.  If floor drains are present, they must not have a grade to the opening that encroaches into the travel path. <br /> <br /> F-min is a rating method used to evaluate the flatness and levelness of a floor designated as &quot;defined travel path&quot;.  For example, an F-min rating of 60 means that there is no more than .129&quot; of variation in the transverse axis (wheels left to right) and .287&quot; variation in the longitudinal axis (front to back) on the equipment.<br /> <br /> To avoid potential damage to drive wheel assemblies, guide track, structural components, guide rollers  and issues with the inner frame equalization the &quot;defined travel path&quot; of the Battery Extractor should meet or exceed the recommended F-min specification. See chart below for the model specifications.<br /> {| class=&quot;wikitable&quot;<br /> !Model<br /> !F-Min<br /> !+/- Longitudinal<br /> !+/- Transverse<br /> !Slope Defect<br /> |-<br /> |SL, DS<br /> |40<br /> |.287&quot;<br /> |.192&quot;<br /> |.096&quot;<br /> |-<br /> |TS<br /> |60<br /> |.186&quot;<br /> |.129&quot;<br /> |.066&quot;<br /> |-<br /> |QS<br /> |85<br /> |.131&quot;<br /> |.091&quot;<br /> |.047&quot;<br /> |}[[File:IOP-400 BE-SL&amp;DS (10-23) Floor Conditions Pre-Installation Check.png|alt=BE-TS Floor Conditions Pre-Installation Check|frameless|500x500px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Floor_Conditions_Pre-Installation_Check.png]]<br /> ==&lt;big&gt;Operating Controls &amp; Instructions&lt;/big&gt;==<br /> <br /> === &lt;big&gt;&lt;u&gt;Operator Console&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Operator Console.png|alt=BE-TS Operator Console|frameless|1080x1080px]]<br /> <br /> '''''NOTE:''' Safety devices for the machine and the machine operating area SHALL NOT be rendered inoperable or misused.'' <br /> <br /> ''Typical BE-TS operator console shown above. Position of optional controls may vary from that shown depending on age of unit and/or combination of optional controls present.''<br /> <br /> ''HMI display standard on units shipped after February, 2020 for Industrial Internet of Things (IIoT) package.''<br /> <br /> ==== &lt;u&gt;&lt;big&gt;Safety Features&lt;/big&gt;&lt;/u&gt; ====<br /> &lt;u&gt;Key Switch&lt;/u&gt; – Located on the dash (see above).  Primary on/off switch to prevent unauthorized personnel from operating the BE.<br /> <br /> &lt;u&gt;Emergency Stop&lt;/u&gt; – Located on the dash (see above). Will stop all functions immediately, locking all hydraulics in place. To use, press down on the red button. The machine key must be used to reset the emergency stop.<br /> <br /> &lt;u&gt;Foot Switch&lt;/u&gt; – Must be depressed to operate the BE.  Stepping off the foot switch will stop all functions immediately, locking all hydraulics in place.  To resume use, depress the foot switch.<br /> <br /> &lt;u&gt;Gate Switch&lt;/u&gt; – The gate must be fully closed for the BE to operate.<br /> <br /> &lt;u&gt;Extractor Arm Switch&lt;/u&gt; – Does not permit the machine to move forward or backward unless the extractor arm is located in the center of the carriage between the indicating arrows located on the arm guard.<br /> <br /> &lt;u&gt;Powered Roller Cutout (PRC-1 or PRC-2) ''(if equipped)''&lt;/u&gt; – Disengages the powered roller function when the photo eye positioned on the edge of the BE battery compartment is disrupted by a battery, requiring additional input from the operator. Pressing the &quot;Power Roller Cutout&quot; override button (see above) on the dash will resume  powered roller operation when loading or unloading batteries from the BE carriage.<br /> <br /> &lt;u&gt;Horn ''(If equipped)''&lt;/u&gt; – Button located on the dash (see above).  Used to alert personnel before moving the BE.<br /> <br /> &lt;u&gt;Strobe Light ''(If equipped)''&lt;/u&gt; – Located on a vertical stanchion mounted to the right rear of the operator compartment. For units equipped with optional overhead guard (OHG), the beacon is located above of the operator compartment.  Beacon automatically flashes when the BE is switched on to visually notify the BE is in use.<br /> <br /> &lt;u&gt;Audible Alarm ''(if equipped)''&lt;/u&gt; – Mounted in the same location as the Strobe Light.  Automatically sounds when the BE is switched on to notify personnel that the BE is in use.<br /> <br /> &lt;u&gt;Blue Light ''(if equipped)''&lt;/u&gt; - Mounted at an elevated position on either end of the extractor which project a bright, highly concentrated blue beam pattern on the ground visually alerting personnel to the direction the extractor is moving.<br /> <br /> === &lt;big&gt;&lt;u&gt;Operation Overview&lt;/u&gt;&lt;/big&gt; ===<br /> <br /> * All operators should be familiar with the operator console of the extractor before performing any battery changes.  The controls of the console are simple and well marked.  It consists of six, manually operated, hydraulic control valves and a three position selector switch which controls the left and right vacuum cups (or optional magnets).<br /> * The operator shall make certain there are no persons or obstacles in the extractor path prior to traveling forward or reverse.<br /> * All manual valves are moved in the direction of the function travel which it controls with exception of the lift/lower valve, which is pulled toward the operator for &quot;up&quot; and pushed away for &quot;down.&quot;<br /> * In the event of any failure or malfunction, step off the dead-man switch or press the E-stop button and all functions will stop immediately, locking all hydraulics in place.<br /> * The extractor arm must be in the center of the carriage or the unit will not travel forward or reverse.<br /> * To ensure smooth operation, all valve movements should be made in a slow, deliberate motion.<br /> * Only one key should be provided to operate the extractor.<br /> * When leaving the machine, the operator shall turn off the key switch, remove the key and logout out of the IIoT (if equipped) to prevent unauthorized use<br /> * Ensure all the batteries and cables are properly stored in the battery stands prior to moving the BE.<br /> * The BE is designed to carry only one battery in each compartment on the carriage.<br /> * When loading the BE, position the batteries in the center of the compartments on the powered rollers to prevent any battery movement when transporting.<br /> * Ensure there are no projections outside of the carriage before moving the BE.<br /> <br /> === &lt;u&gt;&lt;big&gt;Operating Instructions&lt;/big&gt;&lt;/u&gt; ===<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Pre-Change Out Preparation&lt;/u&gt;&lt;/big&gt; ====<br /> 1. Position lift truck for change out in designated area.<br /> <br /> 2. Remove all battery restraints and disconnect battery cables following manufacturers guidelines.  (Be sure to position battery cables so as not to be damaged by the battery during change out.)<br /> <br /> 3. Board battery extractor and close safety gate.  (Gate must be fully closed or unit will not operate.)<br /> <br /> 4. Turn key switch to &quot;ON&quot; position. <br /> <br /> 5. Log in on the HMI display (if equipped with BE-IIoT package).<br /> <br /> 6. Depress foot pedal.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Discharged Battery Removal&lt;/u&gt;&lt;/big&gt; ====<br /> 1. Move extractor forward or reverse to position center of empty compartment with center of lift truck battery compartment. (Lead roller of extractor is equipped with a centering groove.  Users may find it beneficial to mark center of lift truck compartment to aid in alignment.)<br /> <br /> 2. Align extractor's roller compartment height with lift truck's battery compartment.<br /> <br /> 3. Rotate extractor arm into battery compartment aligned in Step 2.<br /> <br /> 4. Move extractor arm toward battery until vacuum cup/magnet contacts battery.<br /> <br /> [[File:NOTICE-warn.png|alt=NOTICE|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:NOTICE-warn.png]] '''DO NOT force cup/magnet into battery after initial contact with battery is made.'''<br /> <br /> 5. Energize vacuum/magnet by turning selector switch to proper direction, left or right.<br /> <br /> 6. Move extractor arm away from lift truck toward center of extractor roller bed, removing discharged battery.  (Battery should be pulled past first three idler rollers onto first or second powered roller.)<br /> <br /> 7. Turn off vacuum/magnet and move extractor arm away from battery 1&quot; to 2&quot;.<br /> <br /> 8. Rotate extractor arm out of battery compartment into opposite compartment (if empty) and center arm in carriage.<br /> <br /> 9. Move battery into center of compartment using powered rollers.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Charged Battery Retrieval&lt;/u&gt;&lt;/big&gt; ====<br /> 1. Locate charged battery for appropriate type of lift truck being changed.<br /> <br /> 2. Raise battery extractor roller compartment to proper level to gain access as needed to disconnect desired battery from its charger and disengage battery safety stop.<br /> <br /> [[File:WARNING-warn.png|alt=WARNING|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:WARNING-warn.png]] '''ALWAYS be sure charging has been completed and charger is not still charging battery. Dangerous sparking/arcing can occur if battery is unplugged from charger while charging.'''<br /> <br /> 3. Move extractor to appropriate rack position and align empty roller compartment with the center of the battery storage rack compartment.  ''(The battery safety stop of each compartment is the center of that compartment and should be used for alignment with the groove in the lead roller of the battery extractor compartment.'') <br /> <br /> 4. Rotate arm into empty compartment (if not already positioned there.)<br /> <br /> 5. Move extractor arm toward battery until vacuum cup/magnet contacts battery.<br /> <br /> 6. Energize vacuum cup/magnet by turning selector switch to proper direction, left or right.<br /> <br /> [[File:NOTICE-warn.png|alt=NOTICE|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:NOTICE-warn.png]] '''DO NOT force cup/magnet into battery after initial contact with battery is made.'''<br /> <br /> 7. Move extractor arm away from battery rack toward center of extractor roller bed, removing charged battery.  (Battery should be pulled past first three idler rollers onto first or second powered roller.)<br /> <br /> 8. Turn off vacuum/magnet and move extractor arm away from battery 1&quot; to 2&quot;.<br /> <br /> 9. Rotate extractor arm out of battery compartment into fully vertical position.<br /> <br /> 10. Move battery into center of compartment using powered rollers.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Discharged Battery Return&lt;/u&gt;&lt;/big&gt; ====<br /> 1. If required, adjust extractor compartment height to battery rack level with open battery compartment.  Drive extractor to align roller compartment containing discharged battery with open battery compartment.<br /> <br /> 2. Return discharged battery to battery rack using powered rollers.<br /> <br /> '''''NOTE:''''' ''In most instances, batteries can be deposited into battery racks in one motion using only powered rollers.  When this does not work, the battery may need slight assistance from extractor arm.  To do this, rotate arm into compartment such as one would if removing battery from rack.  If extractor is vacuum equipped, position top edge of cup slightly higher than edge of battery (or over lifting eye if so equipped) to prevent cup from adhering to battery - No vacuum/magnet is necessary for pushing. DO NOT activate vacuum/magnet switch.  Slowly push battery into rack until fully into compartment.''<br /> <br /> 3. Engage battery safety stop and connect battery to charger as required.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Charged Battery Installation&lt;/u&gt;&lt;/big&gt; ====<br /> 1. Lower extractor to fully lowered position.<br /> <br /> 2. Drive extractor back to lift truck and align roller compartment containing charged battery as performed in steps 1 and 2 of &quot;Discharged Battery Removal&quot;.<br /> <br /> 3. Move charged battery toward lift truck compartment by using powered rollers, verifying precise battery alignment.<br /> <br /> [[File:NOTICE-warn.png|alt=NOTICE|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:NOTICE-warn.png]] '''Many batteries are a tight fit into lift truck battery compartments. Care MUST be taken to ensure alignment is precise to avoid damage to battery, lift truck, and/or battery extractor.'''<br /> <br /> 4. Adjust extractor vertically as well as horizontally, if needed<br /> <br /> 5. Insert battery into lift truck as far as possible using only the powered rollers.<br /> <br /> 6. Rotate extractor arm into compartment and SLOWLY push battery into lift truck.  (Be sure to watch battery cables for interference.)<br /> <br /> 7. Return extractor arm to center of roller bed and lower extractor to fully lowered position.  Drive extractor out of immediate area.<br /> <br /> 8. Turn off key switch, remove key from switch, log out on the HMI display (if equipped with BE-IIoT package) and carefully exit extractor.<br /> <br /> 9. Secure newly installed battery in lift truck and reconnect battery cables.<br /> <br /> 10. Return lift truck to service<br /> {|<br /> ![[File:Caution-Warning.png|alt=CAUTION|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:Caution-Warning.png]]<br /> |'''DO NOT drive the BE into the travel path end stops. The end stops are designed to prevent the BE from accidentally traveling beyond its designated travel path. Driving the BE into the end stops will cause the BE to stop suddenly, possibly causing damage to the end stop, the BE and/or personal injury.'''<br /> |}<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Optional Powered Roller Cutout Operation&lt;/u&gt;&lt;/big&gt; ====<br /> Units equipped with optional Powered Roller Cutout, the powered roller override button must be depressed in addition to actuating the hydraulic valve when a battery disrupts the photo eye(s) at the edge of the battery compartments while using the powered rollers to transfer batteries on and off of the battery extractor.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;IIoT Equipped Units&lt;/u&gt;&lt;/big&gt; ====<br /> Units shipped after February, 2020 are equipped with BE-IIoT (Industrial Internet of Things) package. Operators must log in to the BE-IIoT system using the HMI (Human Machine Interface) display located on the dashboard to operate the extractor.<br /> <br /> When finished operating the extractor, the operator should log out of the BE-IIoT to prevent unauthorized access and/or operation of the extractor.<br /> <br /> == &lt;big&gt;Manual Unloading&lt;/big&gt; ==<br /> '''Lockout/tagout and de-energize all equipment prior to manually unloading any battery.'''<br /> <br /> In the event of power loss or an operational malfunction of the BE not allowing a battery to be unloaded using normal operating procedures, it is recommended a battery be removed from the BE using certified and approved vertical extraction methods and devices.<br /> {|<br /> |[[File:DANGER-warn.png|alt=DANGER|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:DANGER-warn.png]]<br /> |'''Read, understand and observe all safety warnings and procedures related to the vertical extraction device(s) being used.'''<br /> |}<br /> Should the status of the BE not allow for safe vertical extraction (due to position in the battery aisle or level of the inner carriage), only repairs required to safely maneuver the BE to a position allowing for safe vertical extraction should be made.  Once any batteries are safely unloaded, any remaining repairs can be made.<br /> {|<br /> |[[File:DANGER-warn.png|alt=DANGER|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:DANGER-warn.png]]<br /> |'''Extreme care should be taken when working under or around equipment supporting elevated loads. Unexpected movement of the equipment could cause the load and/or equipment to fall. ALWAYS be sure devices of adequate size and strength are in place to prevent any personnel working under the elevated load from being crushed. Serious personal injury or death will occur.'''<br /> |}<br /> <br /> == &lt;big&gt;Spare Parts List&lt;/big&gt; ==<br /> Use only BHS approved replacement parts.<br /> <br /> Refer to the appropriate Spare Parts Kit (vacuum equipped units - Pt# BE-SPKV-TS, magnet equipped units - Pt# BE-SPKM-TS) for the list of items recommended by BHS to have on hand for BE-TS models to minimize any downtime due to minor breakdowns that may occur under normal operating conditions.<br /> <br /> BHS offers many replacement parts kits containing relevant or related parts when replacing certain individual parts or replacing any obsolete / upgraded parts.<br /> <br /> BHS also offers a supplement hose kit (Pt# 80342003) which contains an assortment of hoses allowing any hose on the extractor to be replaced immediately with a temporary hose of equal length or longer. After the extractor is back up and running, the failed hose can be taken to have an exact replacement made. Once the new hose is made and installed, the temporary hose can be returned to the kit for future use.<br /> <br /> Go to [[www.bhs1.com]] and click &quot;Parts&quot; for all the latest parts kits and corresponding installation instructions (if applicable).<br /> <br /> BHS recommends that a full maintenance inspection report similar to the one provided be done at least once a month.<br /> <br /> Any parts found to be excessively worn or damaged should promptly be replaced unless said parts pose a safety risk to the operator and/or extractor, in which case the unit should be removed from service until the problem(s) are remedied (See<br /> <br /> Operator's Daily Checklist.)<br /> <br /> ''Note: Spare parts kits contain parts for the most current machine design/configuration. Due to continuous design and manufacturing updates and improvements, not all the parts in the spare parts kits may be compatible with older units. Consult factory when ordering spare or replacement parts for existing units in the field to ensure part compatibility.''<br /> <br /> = &lt;big&gt;Parts Sections&lt;/big&gt; =<br /> <br /> == &lt;big&gt;Chassis&lt;/big&gt; ==<br /> <br /> === &lt;big&gt;&lt;u&gt;Equalization Components&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Equalization Components.png|alt=BE-TS Chassis Equalization|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PT0222-1<br /> |LINK-CONNECTING-#60<br /> |<br /> |<br /> |8<br /> |-<br /> |2<br /> |HW0017<br /> |NUT-HEX-3/4-10<br /> |<br /> |<br /> |8<br /> |-<br /> |3<br /> |HW0115<br /> |WASHER-LOCK-3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |43097001<br /> |STUD-ANCHOR-5&quot;<br /> |<br /> |''Upper''<br /> |4<br /> |-<br /> |5<br /> |HW0020<br /> |NUT-JAM-3/4-10<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43097002<br /> |STUD-ANCHOR-2&quot;<br /> |<br /> |''Lower''<br /> |4<br /> |-<br /> |7<br /> |00158001-14<br /> |CHAIN-ROLLER-#60<br /> |<br /> |<br /> |4<br /> |}<br /> [[File:BE-TS Equalization Components - 1.0.2.png|alt=BE-TS Chassis Equalization 2|frameless|575x575px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PT0416<br /> |COLLAR-SHAFT-1 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |2<br /> |43097006<br /> |KEY-3/8&quot; X 2 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |PT0224<br /> |SPROCKET-60B12 X 1 1/2&quot;<br /> |<br /> |''Keyed in line''<br /> |8<br /> |-<br /> |4<br /> |PT0405<br /> |FLANGE BEARING-2 BOLT-1 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1 1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |6<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> | rowspan=&quot;4&quot; |7<br /> |43127001<br /> |SHAFT-EQUALIZATION-81.75&quot;<br /> |<br /> |''BE-24-2-TS''<br /> |2<br /> |-<br /> |43327001<br /> |SHAFT-EQUALIZATION-105.75&quot;<br /> |<br /> |''BE-36-2-TS''<br /> |2<br /> |-<br /> |44327001<br /> |SHAFT-EQUALIZATION-117.75&quot;<br /> |<br /> |''BE-42-2-TS''<br /> |2<br /> |-<br /> |44527001<br /> |SHAFT-EQUALIZATION-75.75&quot;<br /> |<br /> |''BE-42-1-TS''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |8<br /> |PT0503<br /> |BEARING-FLANGED LOAD-2 1/4&quot;<br /> |<br /> |''Used after December 2003''<br /> |8<br /> |-<br /> |43026001<br /> |BEARING-FLANGED LOAD-2 1/4&quot; ''(MACHINED)''<br /> |<br /> |''Used prior to December 2003''<br /> |8<br /> |-<br /> |9<br /> |HW0025<br /> |NUT-JAM-7/8-14<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0117<br /> |WASHER-LOCK-7/8&quot; ''(NOT SHOWN)''<br /> |<br /> |''Used prior to August 2002''<br /> |8<br /> |}<br /> <br /> === &lt;u&gt;'''&lt;big&gt;Bridge &amp; Cross Bar&lt;/big&gt;'''&lt;/u&gt; ===<br /> [[File:BE-TS Bridge and Cross Bar.png|alt=BE-TS Bridge and Cross Bar|frameless|524x524px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1 1/4&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |2<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |20<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |20<br /> |-<br /> |4<br /> |HW0515<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |''Fully Threaded''<br /> |8<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> === &lt;u&gt;'''&lt;big&gt;Lift Cylinder Connections&lt;/big&gt;'''&lt;/u&gt; ===<br /> [[File:BE-TS Lift Cylinder Connections.png|alt=BE-TS Lift Cylinder Connections|frameless|589x589px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |00158001-13<br /> |CHAIN-ROLLER-#80<br /> |<br /> |<br /> |4<br /> |-<br /> |2<br /> |HW0014<br /> |NUT-HEX-1-8<br /> |<br /> |<br /> |8<br /> |-<br /> |3<br /> |43897002<br /> |STUD-LIFT-INNER FRAME<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |PT0204<br /> |LINK-CONNECTING-#80<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |43897001<br /> |STUD-LIFT-OUTER FRAME<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43815018<br /> |BRACKET-CYLINDER SUPPORT<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |SS0761<br /> |U-BOLT-CYLINDER MOUNTING<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |12<br /> |-<br /> |9<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |10<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |8<br /> |-<br /> | rowspan=&quot;2&quot; |11<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |<br /> |''Idler caster end of unit'' <br /> |2<br /> |-<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |''Drive wheel end of unit'' <br /> |2<br /> |-<br /> |12<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |14<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |43822002<br /> |CLEVIS ASSEMBLY<br /> |<br /> |''Sold as assembly only''<br /> |4<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Guidance Arm&lt;/big&gt;&lt;/u&gt;''' ===<br /> [[File:BE-TS Guidance Arm.png|alt=BE-TS Guidance Arm|frameless|562x562px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> ! colspan=&quot;2&quot; |NO. REQ<br /> |-<br /> |1<br /> |43015011<br /> |GUIDE ARM WELDMENT, 2 ROLLER<br /> |<br /> |<br /> |2<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |2<br /> |43017025<br /> |SPACER-GUIDE ARM<br /> |<br /> |''† 1/2&quot; thick''<br /> |4<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |3<br /> |41215204<br /> |GUIDE ARM WELDMENT, 4 ROLLER<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |2<br /> |-<br /> |4<br /> |41217274<br /> |SPACER-GUIDE ARM<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |4<br /> |-<br /> |5<br /> |43012007<br /> |CAM ROLLER-1 3/4&quot;<br /> |<br /> |<br /> |4<br /> |8<br /> |-<br /> |6<br /> |HW0115<br /> |WASHER-LOCK-3/4&quot;<br /> |<br /> |<br /> |4<br /> |8<br /> |-<br /> |7<br /> |HW0011<br /> |NUT-HEX-3/4-16<br /> |<br /> |<br /> |4<br /> |8<br /> |-<br /> |8<br /> |HW0509<br /> |BOLT-HHCS-1/2-13 X 4-1/2&quot;<br /> |<br /> |<br /> |4<br /> |6<br /> |-<br /> |9<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |6<br /> |-<br /> |10<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |4<br /> |6<br /> |-<br /> |11<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |4<br /> |6<br /> |-<br /> |12<br /> |41215234<br /> |GUIDE ARM WELDMENT (POLY)<br /> |<br /> |<br /> |2<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |13<br /> |41217317<br /> |POLY SLIDE MOUNTING BLOCK<br /> |<br /> |<br /> |4<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |14<br /> |41217318<br /> |POLY SLIDE<br /> |<br /> |<br /> |4<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |15<br /> |HW0501<br /> |BOLT-HHCS-1/2-13 X 1&quot;<br /> |<br /> |<br /> |12<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |16<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |12<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |17<br /> |91253A546<br /> |BOLT FHSCS-1/4-20 X 1-1/2&quot;<br /> |<br /> |<br /> |8<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |18<br /> |HW0003<br /> |NUT-NILN-1/4-20<br /> |<br /> |<br /> |8<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> ! colspan=&quot;7&quot; |NOTES<br /> |-<br /> | colspan=&quot;7&quot; |''† Older units equipped with (1) 1&quot; thick spacer per guide arm bracket.'' <br /> |-<br /> | colspan=&quot;7&quot; |''†† Multiple styles of guide arms have been utilized on extractors. Refer to the parts diagrams for correct replacement parts.'' <br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Roller Bed Componenets&lt;/big&gt;&lt;/u&gt;''' ===<br /> ==== '''&lt;big&gt;''Idler Rollers''&lt;/big&gt;''' ====<br /> [[File:BE-TS Idler Rollers.png|alt=BE-TS Idler Rollers|frameless|746x746px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;3&quot; |1<br /> |43182001<br /> |LEAD ROLLER ASSEMBLY-24&quot;<br /> |<br /> |''With alignment groove''<br /> |4<br /> |-<br /> |43382001<br /> |LEAD ROLLER ASSEMBLY-36&quot;<br /> |<br /> |''With alignment groove''<br /> |4<br /> |-<br /> |43482001<br /> |LEAD ROLLER ASSEMBLY-42&quot;<br /> |<br /> |''With alignment groove''<br /> |4<br /> |-<br /> | rowspan=&quot;3&quot; |2<br /> |43182002<br /> |IDLER ROLLER ASSEMBLY-24&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |43382002<br /> |IDLER ROLLER ASSEMBLY-36&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |43482002<br /> |IDLER ROLLER ASSEMBLY-42&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> | rowspan=&quot;3&quot; |3<br /> |43187002<br /> |SHAFT-HEX-.75&quot; X 25.75&quot;<br /> |<br /> |''24&quot; compartments''<br /> |8<br /> |-<br /> |43387002<br /> |SHAFT-HEX-.75&quot; X 37.75&quot;<br /> |<br /> |''36&quot; compartments''<br /> |8<br /> |-<br /> |43487002<br /> |SHAFT-HEX-.75&quot; X 43.75&quot;<br /> |<br /> |''42&quot; compartments''<br /> |8<br /> |-<br /> | rowspan=&quot;3&quot; |4<br /> |43187003<br /> |SHAFT-HEX-.75&quot; X 27.5&quot;<br /> |<br /> |''24&quot; compartments''<br /> |4<br /> |-<br /> |43387003<br /> |SHAFT-HEX-.75&quot; X 39.5&quot;<br /> |<br /> |''36&quot; compartments''<br /> |4<br /> |-<br /> |43487003<br /> |SHAFT-HEX-.75&quot; X 45.5&quot;<br /> |<br /> |''42&quot; compartments''<br /> |4<br /> |-<br /> |5<br /> |HW1058<br /> |PIN-HITCH<br /> |<br /> |<br /> |24<br /> |}<br /> '''&lt;big&gt;''Powered Rollers''&lt;/big&gt;'''<br /> <br /> [[File:BE-TS Powered Rollers.png|alt=BE-TS Powered Rollers|frameless|546x546px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;3&quot; |1<br /> |43182003<br /> |POWERED ROLLER-24&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |43382003<br /> |POWERED ROLLER-36&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |43485003<br /> |POWERED ROLLER-42&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |2<br /> |43087001<br /> |JOURNAL-POWERED ROLLER<br /> |<br /> |<br /> |10<br /> |-<br /> |3<br /> |PT0404<br /> |FLANGE BEARING-3-BOLT-1&quot;<br /> |<br /> |<br /> |20<br /> |-<br /> |4<br /> |HW0321<br /> |BOLT-HHCS-5/16-18 X 1 1/4&quot;<br /> |<br /> |<br /> |60<br /> |-<br /> |5<br /> |HW0105<br /> |WASHER-LOCK-5/16&quot;<br /> |<br /> |<br /> |60<br /> |-<br /> |6<br /> |HW0004<br /> |NUT-HEX-5/16-18<br /> |<br /> |<br /> |60<br /> |-<br /> |7<br /> |PT0033<br /> |SPROCKET-35B18 X 1&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |8<br /> |00197028<br /> |KEY-1/4&quot; X 1 1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |00158001-16<br /> |CHAIN-ROLLER-#35<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |PT0031<br /> |LINK-CONNECTING-#35<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |PT0418<br /> |COLLAR-SHAFT-1&quot;<br /> |<br /> |<br /> |10<br /> |}<br /> [[File:BE-TS Powered Rollers Detail A.png|alt=BE-TS Powered Rollers Detail A|frameless|542x542px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0120<br /> |MOTOR-HYDRAULIC-160CC<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW1071<br /> |KEY-WOODRUFF-#808 STD<br /> |<br /> |''Supplied with Item 1''<br /> |A/R<br /> |-<br /> |3<br /> |H1544<br /> |ADAPTER-#6 JICM X #10 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |18<br /> |-<br /> |5<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |18<br /> |-<br /> |6<br /> |43017004<br /> |PLATE-MOTOR MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |PT0302-1<br /> |COUPLING BODY-#40 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |PT0301<br /> |CHAIN-COUPLING-#40<br /> |<br /> |''Includes connecting pin''<br /> |2<br /> |-<br /> |9<br /> |00197026<br /> |KEY-1/4&quot; X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43097003<br /> |KEY-1/4&quot; X 5/8&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Hose Carrier&lt;/big&gt;&lt;/u&gt;''' ===<br /> [[File:BE-TS Hose Carrier.png|alt=BE-TS Hose Carrier|frameless|550x550px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PT0629<br /> |CARRIER TRACK<br /> |<br /> |''81 links required''<br /> |10'<br /> |-<br /> |2<br /> |PT0631<br /> |BRACKET-UPPER MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0212<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0032<br /> |NUT-NILN-#10-24<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |PT0630<br /> |BRACKET-LOWER MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |7<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |43817056-2<br /> |BRACKET-CARRIER TRACK MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |HW0401<br /> |BOLT-HHCS-3/8-16 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |14<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |43817057<br /> |PLATE-CARRIER TRACK SUPPORT<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === &lt;big&gt;'''&lt;u&gt;Cable Retractor&lt;/u&gt;'''&lt;/big&gt; ===<br /> [[File:BE-TS Cable Retractor.png|alt=BE-TS Cable Retractor|frameless|585x585px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |CCR-12HD<br /> |TAKE UP REEL-CARRIER TRACK<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Operator Gate&lt;/big&gt;&lt;/u&gt;''' ===<br /> [[File:BE-TS Discontinued Drop Bar Operator Gate.png|alt=BE-TS Discontinued Drop Bar Operator Gate|frameless|568x568px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43015004<br /> |GATE-OPERATOR<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0407<br /> |BOLT-HHCS-3/8-16 X 2 3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |<br /> |<br /> |1<br /> |}<br /> [[File:BE-TS Operator Gate Continued.png|alt=BE-TS Operator Gate Continued|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43017064-2<br /> |LATCH-SWING GATE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0418<br /> |BOLT-HHCS-3/8-16 X 2 1/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0031<br /> |NUT-LOCK-3/8-16<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |N/A<br /> |HINGE-SPRING<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |5<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |HW1037<br /> |STOP-GATE<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0003<br /> |NUT-NILN-1/4-20<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |N/A<br /> |TORSION SPRING<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |11<br /> |HW0816<br /> |SCREW-HHCS-SELF DRILLING-#10 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |43806001<br /> |ANTI-FATIGUE MAT<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |43017058-2<br /> |THRESHOLD<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |HW0107<br /> |WASHER-LOCK3/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |HW9002<br /> |GAS SPRING<br /> |80292015<br /> |<br /> |1<br /> |-<br /> |19<br /> |43017086-2<br /> |BRACKET-MOUNTING-SPRING<br /> |80292015<br /> |<br /> |2<br /> |-<br /> |20<br /> |HW0815<br /> |SCREW-SELF DRILLING-#12-24 X 1&quot; T-4<br /> |80292015<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Part Discontinued. Spring Hinge and Torsion Spring must be replaced with Gas Spring Kit.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Guarding&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Outer Carriage Guards&lt;/big&gt;''''' ====<br /> <br /> ===== '''''1-Piece Outside Frame Guarding''''' =====<br /> [[File:BE-TS Outside Frame Guard 1-Piece.png|alt=BE-TS Outside Frame Guard 1-Piece|frameless|550x550px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817038<br /> |GUARD-FAR END-TOP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817037<br /> |GUARD-FAR END-MIDDLE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43817035<br /> |GUARD-FAR END-BOTTOM<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |33<br /> |}<br /> <br /> ===== '''''Split Outside Frame Guarding''''' =====<br /> [[File:BE-TS Outside Split Frame Guard.png|alt=BE-TS Outside Split Frame Guard|frameless|562x562px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817103<br /> |GUARD-FAR END-TOP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817102<br /> |GUARD-FAR END-MIDDLE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43817101<br /> |GUARD-FAR END-BOTTOM<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |37<br /> |}<br /> <br /> ==== '''&lt;big&gt;''Inner Carriage Guards''&lt;/big&gt;''' ====<br /> <br /> ===== '''''Inner Carriage Guards (Rotary Actuator)''''' =====<br /> [[File:BE-TS Inner Carriage Guard Rotary.png|alt=BE-TS Inner Carriage Guard (Rotary Actuator Units)|frameless|554x554px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817041-2<br /> |GUARD-FRONT-OPERATOR CONSOLE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817042-2<br /> |GUARD-INNER-FRAME<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |43014006-2<br /> |GUARD-LINEAR DRIVE SCREW<br /> |<br /> |<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |4<br /> |43017010-2<br /> |GUARD-SIDE-ARM CARRIER SHAFT<br /> |<br /> |<br /> |2<br /> |-<br /> |44517002-2<br /> |GUARD-SIDE-ARM CARRIER SHAFT<br /> |<br /> |''† Single compartment units only''<br /> |1<br /> |-<br /> |5<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |34<br /> |-<br /> |6<br /> |43017009-2<br /> |BRACKET-SCREW GUARD MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Single Compartment Guard replaces standard, Far Side Arm Carrier Shaft Guard.'' <br /> |}<br /> '''''Inner Carriage Guards (Helical Actuator)'''''<br /> <br /> [[File:BE-TS Inner Carriage Guard Helical Actuator.png|alt=BE-TS Inner Carriage Guard (Helical Actuator Units)|frameless|547x547px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817041-2<br /> |GUARD-FRONT-OPERATOR CONSOLE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817042-2<br /> |GUARD-INNER-FRAME<br /> |<br /> |<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |3<br /> |43017081-2<br /> |GUARD-SIDE-ARM CARRIER SHAFT<br /> |<br /> |<br /> |2<br /> |-<br /> |44517003-2<br /> |GUARD-SIDE-ARM CARRIER SHAFT<br /> |<br /> |''† Single compartment units only''<br /> |1<br /> |-<br /> |4<br /> |43017080-2<br /> |BRACKET-SIDE GUARD MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |43017082-3<br /> |MOUNT-CHAIN GUARD-LEAD SCREW<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43017082-4<br /> |MOUNT-CHAIN GUARD-LEAD SCREW<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |43017083-2<br /> |GUARD-CHAIN-LEAD SCREW<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0347<br /> |BOLT-BHSCS-1/4-20 X 3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |28<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Single Compartment Guard replaces standard, Far Side Arm Carrier Shaft Guard.'' <br /> |}<br /> <br /> ==== '''&lt;big&gt;''Dash &amp; Platform Guards''&lt;/big&gt;''' ====<br /> [[File:BE-TS Dash &amp; Platform Guards.png|alt=BE-TS Dash &amp; Platform Guards|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41614004-2<br /> |DASHBOARD-OPERATOR CONSOLE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817040<br /> |KICK PLATE-OPERATOR CONSOLE<br /> |<br /> |''41.5&quot; high''<br /> |1<br /> |-<br /> |3<br /> |43817086-2<br /> |DASHBOARD-OPERATOR CONSOLE<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43817088<br /> |KICK PLATE-OPERATOR CONSOLE<br /> |<br /> |''33.5&quot;'' ''high''<br /> |1<br /> |-<br /> |5<br /> |43817110-2<br /> |FRAME-DASHBOARD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |A/R<br /> |PLATE-DASHBOARD<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |7<br /> |HW0060<br /> |NUT-CLIP-#10-24<br /> |<br /> |<br /> |12<br /> |-<br /> |8<br /> |SS0114<br /> |BHSCS-#10-24 X 1/2&quot;-SST<br /> |<br /> |<br /> |12<br /> |-<br /> |9<br /> |PL0602<br /> |VINYL EDGING<br /> |<br /> |''At Foot Switch (Not shown)'' <br /> |1'<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Consult factory''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Lift Cylinder Guards&lt;/big&gt;''''' ====<br /> [[File:BE-TS Lift Cylinder Guards.png|alt=BE-TS Lift Cylinder Guards|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;2&quot; |1<br /> |43815016<br /> |GUARD-CLEVIS<br /> |<br /> |Operator right / Far left<br /> |2<br /> |-<br /> |43815017<br /> |GUARD-CLEVIS<br /> |<br /> |Operator left / Far right<br /> |2<br /> |-<br /> |2<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Labels &amp; Placards&lt;/big&gt;&lt;/u&gt;''' ===<br /> [[File:BE-TS Labels &amp; Placards Chassis.png|alt=BE-TS Labels &amp; Placards Chassis|frameless|546x546px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |00196616<br /> |LABEL-&quot;NO RIDERS ALLOWED&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |00196210<br /> |LABEL-WARNING-&quot;OPERATION BY AUTHORIZED PERSONNEL ONLY&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43696001<br /> |PLACARD-OFF / ON<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43096018<br /> |PLACARD-RACK LEVEL ASSIST<br /> |<br /> |''† If equipped''<br /> |1<br /> |-<br /> |5<br /> |43096015<br /> |PLACARD-PLATFORM RAISE / LOWER<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43096010<br /> |PLACARD-HORN<br /> |<br /> |''† If equipped''<br /> |1<br /> |-<br /> |7<br /> |43096016<br /> |PLACARD-DRIVE / ARM ROTATION<br /> |<br /> |<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |8<br /> |43096012<br /> |PLACARD-VACUUM OFF / ON<br /> |<br /> |''Vacuum units only''<br /> |1<br /> |-<br /> |43096011<br /> |PLACARD-MAGNET OFF / ON<br /> |<br /> |''Magnet units only (Not shown)''<br /> |1<br /> |-<br /> |9<br /> |43096017<br /> |PLACARD-POWERED ROLLER CUTOUT OVERRIDE<br /> |<br /> |''† If equipped''<br /> |1<br /> |-<br /> |10<br /> |43096013<br /> |PLACARD-POWERED ROLLERS / ARM TRAVERSE<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |00196633<br /> |LABEL-NOTICE-&quot;IN LINE VACUUM FILTER...&quot;<br /> |<br /> |''(1) per side (Vacuum units only)''<br /> |2<br /> |-<br /> |12<br /> |SM-1197<br /> |LABEL-ARM POSITION ARROW<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |00196609<br /> |LABEL-NOTICE-&quot;ARM MUST BE POSITIONED BETWEEN ARROWS...&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |00196602<br /> |LABEL-NOTICE-&quot;LUBRICATION POINTS ON UNDERSIDE&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |00196218<br /> |LABEL-WARNING-&quot;ELECTRICAL VOLTAGE HAZARD&quot;<br /> |<br /> |''Magnet units only''<br /> |1<br /> |-<br /> |16<br /> |00196238<br /> |LABEL-WARNING-&quot;STRONG MAGNETIC<br /> <br /> FIELD/DO NOT USE WITH PACEMAKER&quot;<br /> |<br /> |''†† Magnet units only''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Rack Level Assist (LAI), Horn and Powered Roller Cutout (PRC) are optional features. Not all units are equipped with these options.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Pacemaker Warning Label takes the place of the discontinued, Triangular Magnetic Field Label.''<br /> |}<br /> [[File:BE-TS Labels &amp; Placards Frame.png|alt=BE-TS Labels &amp; Placards Frame|frameless|549x549px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |00196004<br /> |LABEL-CAUTION-&quot;WATCH FOR BATTERY AND CHARGER CABLES IN TRAVEL PATH&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |00196216<br /> |LABEL-WARNING-&quot;CHAIN ENTANGLEMENT<br /> <br /> HAZARD&quot;<br /> |<br /> |''(1) per Clevis Guard'' <br /> |4<br /> |-<br /> |3<br /> |00196622<br /> |LABEL-LIFT POINT<br /> |<br /> |''(2) each end''<br /> |4<br /> |-<br /> |4<br /> |00196700<br /> |DECAL-BHS-24&quot; X 7.875&quot;<br /> |<br /> |''Far end (Not shown)''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |5<br /> |00196630<br /> |LABEL-NOTICE-HYD. OIL SPEC. (AW 68)<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |00196645<br /> |LABEL-NOTICE-HYD. OIL SPEC. (AW 32)<br /> |<br /> |''† See notes'' <br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |† Most units shipped prior to December 2014 require AW 68 Hydraulic Oil. Some units shipped prior to December 2014 shipped with AW 32 for low temperature applications.<br /> |}<br /> <br /> == &lt;big&gt;Extractor Arm&lt;/big&gt; ==<br /> {| class=&quot;wikitable&quot;<br /> !SYMBOL<br /> !DESCRIPTION / NOTICE<br /> !ACTUATOR DIAGRAM<br /> |-<br /> |[[File:IOP-400 BE-SL&amp;DS (10-23) Rotary Actuator Symbol.png|alt=Rotary Actuator Symbol|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Rotary_Actuator_Symbol.png]]<br /> |<br /> ==='''&lt;u&gt;&lt;big&gt;Rotary Actuator Symbol&lt;/big&gt;&lt;/u&gt;'''===<br /> Battery Extractors shipped prior to May 2020 are equipped with Rotary Actuator Extractor Arms. Parts Diagrams Specific to the Rotary Actuator design are indicated with the Rotary Actuator symbol.<br /> |[[File:IOP-400 BE-SL&amp;DS (10-23) Rotary Actuator Extractor Arm.png|alt=BE-TS Rotary Actuator|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Rotary_Actuator_Extractor_Arm.png]]<br /> |-<br /> |[[File:IOP-400 BE-SL&amp;DS (10-23) Helical Actuator Symbol.png|alt=Helical Actuator Symbol|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Helical_Actuator_Symbol.png]]<br /> |<br /> ===&lt;big&gt;'''&lt;u&gt;Helical Actuator Symbol&lt;/u&gt;'''&lt;/big&gt;===<br /> Battery Extractors shipped from May 2020 to Present are equipped with Helical Actuator Extractor Arms. Parts Diagrams Specific to the Rotary Actuator design are indicated with the Helical Actuator Symbol.<br /> |[[File:IOP-400 BE-SL&amp;DS (10-23) Helical Actuator Extractor Arm.png|alt=BE-TS Helical Actuator|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Helical_Actuator_Extractor_Arm.png]]<br /> |}<br /> ===&lt;big&gt;&lt;u&gt;Vacuum Components &amp; Swing Arms&lt;/u&gt;&lt;/big&gt;===<br /> ====''&lt;big&gt;Vacuum Arms (Rotary Actuator)&lt;/big&gt;''====<br /> [[File:BE-TS Vacuum Arms (Rotary Actuator).png|alt=BE-TS Vacuum Arms (Rotary Actuator)|frameless|619x619px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;2&quot; |1<br /> |N/A<br /> |ARM-PUSH/PULL-30&quot;<br /> |<br /> |''&lt;sup&gt;†&lt;/sup&gt; Discontinued''<br /> |1<br /> |-<br /> |N/A<br /> |ARM-PUSH/PULL-36&quot;<br /> |<br /> |''&lt;sup&gt;†&lt;/sup&gt; Discontinued''<br /> |1<br /> |-<br /> |2<br /> |HW0509<br /> |BOLT-HHCS-1/2-13 X 4 1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |P0505<br /> |BUSHING-RED-#6 NPT X #4 FNPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |P0402<br /> |HOSE BARB-1/4 X #4 MNPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0428<br /> |STUD-VACUUM-3/8-16 X 5&quot;<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |9<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |HW-KIT-2<br /> |<br /> |40<br /> |-<br /> |10<br /> |HW1001<br /> |SPRING-3/8&quot;<br /> |HW-KIT-2<br /> |<br /> |24<br /> |-<br /> |11<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |12<br /> |HW0424<br /> |NUT-JAM-3/8-16<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |REF<br /> |43052006<br /> |ADJUSTABLE PUSH/PULL ARM<br /> |<br /> |''Includes Items 13 through 17''<br /> |1<br /> |-<br /> |13<br /> |43057034<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |43055008<br /> |VACUUM CUP MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''&lt;sup&gt;†&lt;/sup&gt; One-piece Arms no longer available. Must replace with Adjustable Arm.''<br /> |}<br /> <br /> ====&lt;big&gt;''Vacuum Cups''&lt;/big&gt;====<br /> [[File:BE-TS Vacuum Cups.png|alt=Vacuum Cups|frameless|563x563px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;4&quot; |A/R<br /> |00162004<br /> |VACUUM CUP-10&quot; 3-PC (STANDARD)<br /> |<br /> |''&lt;sup&gt;†&lt;/sup&gt; Includes Items 1 through 4''<br /> | rowspan=&quot;4&quot; |A/R<br /> |-<br /> |00162003<br /> |VACUUM CUP-12&quot; 3-PC (STANDARD)<br /> |<br /> |''&lt;sup&gt;†&lt;/sup&gt; Includes Items 4 through 7''<br /> |-<br /> |00162007<br /> |VACUUM CUP-10&quot; 3-PC, REINFORCED<br /> |<br /> |''Includes Items 1,3,4 &amp; 8''<br /> |-<br /> |00162005<br /> |VACUUM CUP-12&quot; 3-PC, REINFORCED<br /> |<br /> |''Includes Items 4,5,7 &amp; 9''<br /> |-<br /> |1<br /> |00164006<br /> |CASTING-10&quot; VACUUM CUP<br /> |<br /> | rowspan=&quot;3&quot; |''10&quot; cup only''<br /> |1<br /> |-<br /> |2<br /> |00164004<br /> |SEAL-RUBBER-10&quot;<br /> |<br /> |1<br /> |-<br /> |3<br /> |00165002<br /> |PLATE-FRONT-10&quot;<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0311<br /> |BOLT-FHSCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |00166001<br /> |CASTING-12&quot; VACUUM CUP<br /> |<br /> | rowspan=&quot;3&quot; |''12&quot; cup only''<br /> |1<br /> |-<br /> |6<br /> |00164001<br /> |SEAL-RUBBER-12&quot;<br /> |<br /> |1<br /> |-<br /> |7<br /> |00165001<br /> |PLATE-FRONT-12&quot;<br /> |<br /> |1<br /> |-<br /> |8<br /> |00164007<br /> |SEAL-RUBBER-10&quot;-REINFORCED<br /> |<br /> |<br /> |A/R<br /> |-<br /> |9<br /> |00167003<br /> |SEAL-RUBBER-12&quot;-REINFORCED<br /> |<br /> |<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''&lt;sup&gt;†&lt;/sup&gt; 10&quot; and 12&quot; 1-Piece Cups no longer available. Must replace with 3-Piece Cup. Verify required cup size prior to ordering.''<br /> |}<br /> <br /> ====&lt;big&gt;''Swing Arms (Rotary Actuator)''&lt;/big&gt;====<br /> [[File:BE-TS Swing Arms (Rotary Actuator).png|alt=BE-TS Swing Arms (Rotary Actuator)|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> |ITEM<br /> |BHS PART NUMBER<br /> |DESCRIPTION<br /> |REF. KIT NO.<br /> |NOTES<br /> |NO. REQ<br /> |-<br /> | rowspan=&quot;3&quot; |1<br /> |45055001<br /> |TIE PLATE-SWING ARM<br /> |<br /> |BE-24-2-TS<br /> |1<br /> |-<br /> |45255001<br /> |TIE PLATE-SWING ARM<br /> |<br /> |BE-36-2-TS (NOT SHOWN)<br /> |1<br /> |-<br /> |45355001<br /> |TIE PLATE-SWING ARM<br /> |<br /> |BE-42-2-TS (NOT SHOWN)<br /> |1<br /> |-<br /> |2<br /> |43055004<br /> |SWING ARM-RHS<br /> |†<br /> |NOT SOLD INDIVIDUALLY<br /> |1<br /> |-<br /> |3<br /> |43055002<br /> |SWING ARM-LHS<br /> |†<br /> |NOT SOLD INDIVIDUALLY<br /> |1<br /> |-<br /> |4<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0113<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0010<br /> |NUT-JAM-5/8-11<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |PT0413<br /> |COLLAR-SHAFT-3&quot;<br /> |80252001<br /> |<br /> |2<br /> |-<br /> |8<br /> |43027001<br /> |SHAFT-ROTARY ACTUATOR<br /> |80252001<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW1013<br /> |KEY-3/8&quot; X 12&quot;<br /> |80252001<br /> |<br /> |1<br /> |-<br /> |10<br /> |PT0419<br /> |BEARING-SAE 841-2&quot; I.D., 3&quot; OD, 1/8&quot; THICK<br /> |80252001<br /> |<br /> |3<br /> |-<br /> |11<br /> |43052005<br /> |CAP-BEARING<br /> |<br /> |INCLUDES BEARING<br /> |2<br /> |-<br /> |12<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |13<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |14<br /> |43057014<br /> |STANDOFF-WIRE<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |HW0312<br /> |SCREW-SHSS-1/4-20 X 1&quot;-CUP POINT<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |43057003<br /> |CUSHION-SWING ARM<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |43055001<br /> |STOP-SWING ARM<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |20<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |21<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |H1565<br /> |ADAPTER-45 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |23<br /> |H1600<br /> |ADAPTER-90 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |&lt;sup&gt;†&lt;/sup&gt; ''Included in multiple kits.''<br /> |-<br /> | colspan=&quot;6&quot; |See ''Single Compartment Swing Arm Stop for the the Single Compartment Swing Arm Stop.''<br /> |}<br /> <br /> === '''''Vacuum Swing Arm Stop (Rotary Actuator)''''' ===<br /> [[File:BE-TS Single Compartment Swing Arms (Rotary Actuator).png|alt=BE-TS Single Compartment Swing Arms (Rotary Actuator)|frameless|575x575px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |44555001<br /> |STOP-SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43057003<br /> |CUSHION-SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43057008<br /> |SPACER-SWING ARM STOP<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |}<br /> ====''&lt;big&gt;Vacuum Pump (Rotary Actuator)&lt;/big&gt;''====<br /> [[File:BE-TS Vacuum Pumps (Rotary Actuator).png|alt=BE-TS Vacuum Pumps (Rotary Actuator)|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |P0005<br /> |PUMP-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |P0208<br /> |FILTER-HI FLOW<br /> |<br /> |<br /> |3<br /> |-<br /> |3<br /> |P0503<br /> |NIPPLE-#4 NPT-BRASS<br /> |<br /> |<br /> |3<br /> |-<br /> |4<br /> |P0502<br /> |TEE-#4 FNPT-BRASS<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |P0506<br /> |ELBOW-STR-90 DEG-#4 NPT-BRASS<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |P0402<br /> |HOSE BARB-1/4 X #4 NPTM-BRASS<br /> |<br /> |<br /> |6<br /> |-<br /> |7<br /> |P0207<br /> |VALVE-VACUUM RELEASE<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |P0302<br /> |HOSE-VACUUM-1/4&quot; I.D.<br /> |<br /> |''Two 6&quot; pieces''<br /> |1'<br /> |-<br /> |9<br /> |P0302<br /> |HOSE-VACUUM-1/4&quot; I.D.<br /> |<br /> |''Short Arm side''<br /> |1'<br /> |-<br /> |10<br /> |P0302<br /> |HOSE-VACUUM-1/4&quot; I.D.<br /> |<br /> |''Long Arm side''<br /> |2'<br /> |-<br /> |11<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |HW0212<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |E0624<br /> |CONNECTOR-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |15a<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |''Not shown''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |16<br /> |E0501<br /> |CORD-14-4 SW/SOW<br /> |<br /> |''Withtout Ground Connection in Arm''<br /> | rowspan=&quot;2&quot; |15'<br /> |-<br /> |E0514<br /> |CORD-16-5 SW/SOW<br /> |<br /> |<br /> |-<br /> |17<br /> |43057014<br /> |STANDOFF-CABLE<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |HW0206<br /> |SCREW-RHMS-#10-32 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |19<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |20<br /> |43057021<br /> |PLATE-STIFFENER<br /> |†<br /> |<br /> |2<br /> |-<br /> |21<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |†<br /> |<br /> |12<br /> |-<br /> |22<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |†<br /> |<br /> |12<br /> |-<br /> |23<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |†<br /> |<br /> |12<br /> |-<br /> |24<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |†<br /> |''Not shown''<br /> |24<br /> |-<br /> |25<br /> |P0111<br /> |FILTER-VACUUM-INLINE<br /> |<br /> |''Not shown''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |&lt;sup&gt;†&lt;/sup&gt; ''Included in multiple kits.''<br /> |}<br /> ===&lt;u&gt;&lt;big&gt;Rotary Actuator&lt;/big&gt;&lt;/u&gt;===<br /> [[File:BE-TS Rotary Actuator.png|alt=BE-TS Rotary Actuator|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43046001<br /> |ROTARY ACTUATOR<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |80000002<br /> |ROTARY ACTUATOR BASE ASSEMBLY<br /> |<br /> |''Without Actuator''<br /> |1<br /> |-<br /> |2A<br /> |N/A<br /> |VERTICAL CARRIER PLATE-OUTER<br /> |<br /> |''Included with 80000002''<br /> |2<br /> |-<br /> |2B<br /> |N/A<br /> |VERTICAL CARRIER PLATE-INNER<br /> |<br /> |''Included with 80000002''<br /> |1<br /> |-<br /> |2C<br /> |N/A<br /> |CARRIER BASE PLATE<br /> |<br /> |''Included with 80000002''<br /> |1<br /> |-<br /> |3<br /> |HW1070<br /> |PIN-PULL DOWEL-5/8&quot; X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0508<br /> |BOLT-SHCS-1/2-13 X 3/4&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW1045<br /> |PIN-PULL DOWEL-3/8&quot; X 1 1/2&quot;<br /> |<br /> |''Included with 80000002''<br /> |6<br /> |-<br /> |6<br /> |HW0412<br /> |BOLT-SHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |''Included with 80000002''<br /> |12<br /> |-<br /> |7<br /> |H0010<br /> |FITTING-BULKHEAD-3/4-16 X #4 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 NPTM<br /> |<br /> |<br /> |2<br /> |}<br /> ===&lt;u&gt;&lt;big&gt;Carrier Shafts &amp; Bearings ''(Rotary Actuator)''&lt;/big&gt;&lt;/u&gt;===<br /> [[File:BE-TS Rotary Actuator Carrier Shafts.png|alt=BE-TS Carrier Shafts (Rotary Actuator)|frameless|560x560px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43057045<br /> |CARRIER SHAFT-EXTRACTOR ARM<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |2<br /> |43054007<br /> |BEARING-EXTRACTOR ARM CARRIER<br /> |80252002<br /> |''†† See notes''<br /> |4<br /> |-<br /> |3<br /> |HW0412<br /> |BOLT-SHCS-3/8-16 X 1 1/4&quot;<br /> |80252002<br /> |<br /> |16<br /> |-<br /> |4<br /> |PT0413<br /> |COLLAR-SHAFT-3&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |PT0624<br /> |FITTING-ZERK<br /> |80252002<br /> |''Not shown''<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Vacuum_Extended_Reach_(Rotary_Actuator) Vacuum Extended Reach (Rotary Actuator)] section for Extended Reach equipped units.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Carrier_Shafts_&amp;_Bearings Carrier Shafts &amp; Bearings (Helical Actuator)] section for Helical Actuator equipped units.''<br /> |}<br /> <br /> ===&lt;u&gt;&lt;big&gt;Drive Screw Components ''(Rotary Actuator)''&lt;/big&gt;&lt;/u&gt;===<br /> ====''&lt;big&gt;Drive Nut Assembly (Rotary Actuator)&lt;/big&gt;''====<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Drive Nut Assembly Rotary Actuator.png|alt=BE-SL&amp;DS Drive Nut Assembly Rotary Actuator|frameless|537x537px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Drive_Nut_Assembly_Rotary_Actuator.png]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43054006<br /> |DRIVE NUT ASSEMBLY<br /> |80252003<br /> |&lt;sup&gt;''†''&lt;/sup&gt; ''See notes''<br /> |1<br /> |-<br /> |2<br /> |HW0426<br /> |BOLT-SHCS-3/8-16 X 5 1/2&quot;<br /> |80252003<br /> |&lt;sup&gt;''††''&lt;/sup&gt; ''See notes''<br /> |4<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |80252003<br /> |&lt;sup&gt;''††''&lt;/sup&gt; ''See notes''<br /> |4<br /> |-<br /> |4<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |80252003<br /> |&lt;sup&gt;''††''&lt;/sup&gt; ''See notes''<br /> |4<br /> |-<br /> |5<br /> |PT0624<br /> |FITTING-ZERK<br /> |80252003<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''&lt;sup&gt;†&lt;/sup&gt; See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Drive_Nut_Assembly_(Helical_Actuator) Drive Nut Assembly (Helical Actuator)] section for Helical Actuator equipped units.''<br /> |-<br /> | colspan=&quot;6&quot; |''&lt;sup&gt;††&lt;/sup&gt; It is recommended to replace mounting hardware when replacing Drive Nut Assembly.''<br /> |}<br /> ====''&lt;big&gt;Drive Screw&lt;/big&gt;''====<br /> =====''[Current] Drive Screw Assembly (Frame #'s 374 to Present)''=====<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Drive Screw Rotary Current.png|alt=Current BE-SL &amp; BE-DS Drive Screw (Rotary Actuator)|frameless|531x531px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Drive_Screw_Rotary_Current.png]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43024001<br /> |SCREW-LINEAR DRIVE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |PT0119<br /> |SPROCKET-50B15 X 1 3/16&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43097004<br /> |KEY-1/4 X 7/8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |00158001-15<br /> |CHAIN-ROLLER-#50<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |PT0102<br /> |LINK-CONNECTING-#50<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |PT0406<br /> |FLANGE BEARING-4 BOLT-1 3/16&quot;<br /> |<br /> |''Alloy casting''<br /> |2<br /> |-<br /> |7<br /> |HW0503<br /> |BOLT-HHCS-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |PT0107<br /> |SPROCKET-50B15 X 1&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HC0121<br /> |MOTOR-HYDRAULIC-100CC<br /> |<br /> |''SAE 2-Bolt mount''<br /> |1<br /> |-<br /> |11<br /> |H1605<br /> |ADAPTER-90 DEG-#6 JICM X #10 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW1071<br /> |KEY-WOODRUFF-#808 STD<br /> |<br /> |''Supplied with Item 10''<br /> |A/R<br /> |-<br /> |13<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |14<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |15<br /> |43017007<br /> |PLATE-MOUNTING-SCREW DRIVE MOTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |43057019<br /> |PLATE-COVER<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0415<br /> |BOLT-SHCS-3/8-16 X 3/4&quot;<br /> |<br /> |<br /> |8<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> ! colspan=&quot;6&quot; |ITEMS BELOW ARE REQUIRED FOR REPLACING THE LINEAR DRIVE<br /> <br /> SCREW ON UNITS WITH FRAME #'S OF 373 AND EARLIER<br /> |-<br /> ! colspan=&quot;6&quot; |LINEAR DRIVE SCREW UPDATE KIT<br /> |-<br /> |REF<br /> |80252011<br /> |UPGRADE KIT<br /> |<br /> |<br /> |1<br /> |-<br /> |1<br /> |43024001<br /> |SCREW-LINEAR DRIVE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |PT0119<br /> |SPROCKET-50B15 X 1 3/16&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43097004<br /> |KEY-1/4&quot; X 7/8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |PT0406<br /> |FLANGE BEARING-4 BOLT-1 3/16&quot;<br /> |<br /> |''Alloy casting''<br /> |2<br /> |-<br /> |7<br /> |HW0503<br /> |BOLT-HHCS-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |16<br /> |43057019<br /> |PLATE-COVER<br /> |<br /> |<br /> |2<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |43057022<br /> |SHIM-18GA<br /> |<br /> |''May not be required'' - ''(Not shown)''<br /> |2<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |43057018<br /> |TEMPLATE-BEARING MOUNT PATTERN<br /> |<br /> |''(Not shown)''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |43057020<br /> |SPACER PLATE<br /> |<br /> |''(Not shown)''<br /> |2<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |80000015<br /> |INSTRUCTION DETAIL<br /> |<br /> |''(Not shown)''<br /> |REF<br /> |}<br /> <br /> =====''[Discontinued] Drive Screw Assembly (Frame #'s 373 and Earlier)''=====<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Drive Screw (Rotary Actuator) Discontinued.png|alt=Discontinued BE-SL &amp; BE-DS Drive Screw (Rotary Actuator)|frameless|532x532px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Drive_Screw_(Rotary_Actuator)_Discontinued.png]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |SCREW-LINEAR DRIVE (DISCONTINUED)<br /> |<br /> |''See 80252011 Upgrade Kit''<br /> |1<br /> |-<br /> |2<br /> |PT0118<br /> |SPROCKET-50B12 X 1 3/16&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43097004<br /> |KEY-1/4&quot; X 7/8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |00158001-15<br /> |CHAIN-ROLLER-#50<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |PT0102<br /> |LINK-CONNECTING-#50<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43057016<br /> |BLOCK-BEARING RETAINER<br /> |<br /> |<br /> |2<br /> |-<br /> |6a<br /> |PT0414<br /> |RACE-TAPERED ROLLER BEARING<br /> |<br /> |''Included with 43057016''<br /> |2<br /> |-<br /> |7<br /> |PT0623<br /> |SEAL-GREASE<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0416<br /> |BOLT-SHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |PT0415<br /> |BEARING-TAPERED ROLLER<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW1050<br /> |NUT-LOCK<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |43057017<br /> |PLATE-COVER<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0415<br /> |BOLT-SHCS-3/8-16 X 3/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |13<br /> |PT0624<br /> |FITTING-ZERK<br /> |<br /> |<br /> |2<br /> |}<br /> ===&lt;big&gt;&lt;u&gt;Hose Carrier Plate&lt;/u&gt;&lt;/big&gt;===<br /> [[File:BE-TS Hose Carrier Plate.png|alt=BE-TS Hose Carrier Plate|frameless|554x554px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43915018<br /> |PLATE-HOSE CARRIER<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |PT0618<br /> |BRACKET-FIXED END<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |PT0617<br /> |HOSE CARRIER<br /> |<br /> |''20 links required''<br /> |3 FT<br /> |-<br /> |5<br /> |PT0619<br /> |BRACKET-MOVING END<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |9<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |10<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HC0262<br /> |VALVE-CROSS PORT RELIEF<br /> |<br /> |''Includes cartridges''<br /> |1<br /> |-<br /> |12a<br /> |43846002<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''†† For Item 12 (Not shown)''<br /> |2<br /> |-<br /> |13<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |H1560<br /> |ADAPTER-45 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |E1329<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |''PVC - Includes cover''<br /> |1<br /> |-<br /> |19<br /> |HW0212<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |20<br /> |HW0102<br /> |WASHER-FLAT-#10-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |21<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |22<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |23<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |''For Items 21 &amp; 22 (Not shown)''<br /> |3<br /> |-<br /> |24<br /> |HW1076<br /> |BOLT-FHSCS-3/8-16 X 1&quot;<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Units built prior to February 2014 without extended reach option use (4) HW0403 mounting bolts.''<br /> <br /> ''†† Cartridges are for replacement only.''<br /> |}<br /> <br /> === &lt;big&gt;'''&lt;u&gt;Magnet Components ''(Rotary Actuator)''&lt;/u&gt;'''&lt;/big&gt; ===<br /> <br /> ==== '''''&lt;big&gt;[Discontinued] Magnet Arm Configuration&lt;/big&gt;''''' ====<br /> [[File:BE-TS (Discontinued) Magnet Arm Configuration.png|alt=BE-TS (Discontinued) Magnet Arm Configuration|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41257014<br /> |TIE PLATE-SWING ARM<br /> |<br /> |''All units''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |41655008<br /> |EXTENSION-ARM<br /> |<br /> |''BE-36 only (Not shown)''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |43455001<br /> |EXTENSION-ARM<br /> |<br /> |''BE-42 only (Not shown)''<br /> |1<br /> |-<br /> |2<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0113<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0010<br /> |NUT-JAM-5/8-11<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |41655001<br /> |CARRIER TUBE-MAGNET SWING SHAFT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |7<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |9<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |6<br /> |-<br /> |10<br /> |41657006<br /> |SHAFT-MAGNET SWING<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |41698001<br /> |KEY-3/8&quot; X 7/16&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |N/A<br /> |STOP-MAGNET SWING<br /> |<br /> |''† Dicontinued''<br /> |1<br /> |-<br /> |13<br /> |PT0430<br /> |FLANGE BEARING-4 BOLT-1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |HW0513<br /> |BOLT-HHCS-1/2-13 X 2 1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |15<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |16<br /> |-<br /> |16<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |17<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |-<br /> |18<br /> |41655002<br /> |PLATE-MAGNET MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |41257015<br /> |BLOCK-TIGHTENER<br /> |<br /> |''2-piece item''<br /> |1<br /> |-<br /> |20<br /> |41257016<br /> |BLOCK-FIXED<br /> |<br /> |''2-piece item''<br /> |1<br /> |-<br /> |21<br /> |HW0423<br /> |BOLT-SHCS-3/8-16 X 3 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0806<br /> |SET SCREW-3/8-16 X 2&quot;<br /> |<br /> |''Replaces Swivel Head''<br /> |4<br /> |-<br /> |24<br /> |HW0424<br /> |NUT-JAM-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |25<br /> |41657017<br /> |INSULATOR-MAGNET MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |26<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |27<br /> |41657008<br /> |PAD-MAGNET SLIDE<br /> |<br /> |<br /> |2<br /> |-<br /> |28<br /> |HW0314<br /> |BOLT-FHSCS-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Refer to [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#&amp;#x5B;Current&amp;#x5D;_Magnet_Arm_Configuration_(Rotary_Actuator) &lt;nowiki&gt;[Current] Magnet Arm Configuration (Rotary Actuator)&lt;/nowiki&gt;] section for replacement / upgrade parts.''<br /> |}<br /> <br /> ==== '''&lt;big&gt;''Magnet Pivot Stop (Rotary Actuator)''&lt;/big&gt;''' ====<br /> [[File:BE-TS Magnet Pivot Stop.png|alt=BE-TS Magnet Pivot Stop|frameless|547x547px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |MAGNET PUSH/PULL ARM<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |43055010<br /> |MAGNET MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |PT0470<br /> |BEARING-MAGNET PIVOT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0525<br /> |BOLT-CARRIAGE-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |5<br /> |HW0524<br /> |BOLT-CARRIAGE-1/2-13 X 2&quot;<br /> |<br /> |''†† Stop Plate location''<br /> |4<br /> |-<br /> |6<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |7<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |16<br /> |-<br /> |8<br /> |43058009<br /> |PLATE-ROTATION STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |43058003<br /> |SLEEVE-STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43058010<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |PL0501<br /> |GROMMET-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |43057037<br /> |INSULATOR-BOTTOM<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |16<br /> |41657008<br /> |SLIDE-MAGNET<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0314<br /> |BOLT-FHSCS-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |44558001<br /> |PLATE-ROTATION STOP<br /> |<br /> |''†† Single compartment units only''<br /> |2<br /> |-<br /> |REF<br /> |43052014<br /> |ADJUSTABLE PUSH-PULL ARM<br /> |<br /> |''Includes Items 19-23''<br /> |A/R<br /> |-<br /> |19<br /> |43055018<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |20<br /> |43055019<br /> |MAGNET MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |21<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |22<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† 1-Piece Arm no longer available. Must be replaced with Adjustable Arm.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Single compartment Stop Plates require (1) additional 2&quot; long Carriage Bolt each''<br /> |}<br /> <br /> ==== &lt;big&gt;''[Current] Magnet Arm Configuration (Rotary Actuator)''&lt;/big&gt; ====<br /> [[File:BE-TS (Current) Magnet Arm Configuration.png|alt=BE-TS (Current) Magnet Arm Configuration|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |80252012<br /> |MAGNET SWING STOP KIT<br /> |<br /> |''Includes Items 1 through 6''<br /> |A/R<br /> |-<br /> |1<br /> |43057029<br /> |PLATE-STOP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43058003<br /> |SLEEVE-STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |43057030<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |PL0501<br /> |GROMMET-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0509<br /> |BOLT-HHCS-1/2-13 X 4 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |44557003<br /> |PLATE-STOP<br /> |<br /> |''† Single compartment units only''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† For units equipped with Pivot Shaft. See [Current] Magnet Arm Configuration (Rotary Actuator) for units with Independent Magnet Pivot Bearings.'' <br /> |}<br /> <br /> ==== &lt;big&gt;''Magnet Mounting Hardware (Rotary Actuator)''&lt;/big&gt; ====<br /> [[File:BE-TS Magnet Mounting Hardware (Rotary Actuator).png|alt=BE-TS Magnet Mounting Hardware (Rotary Actuator)|frameless|554x554px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43032009<br /> |MAGNET ASSEMBLY<br /> |<br /> |''Includes Items 1 through 12''<br /> |A/R<br /> |-<br /> |1<br /> |N/A<br /> |ELECTROMAGNET-95VDC<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |E0314<br /> |SENSOR-PROXIMITY-30MM<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |N/A<br /> |GASKET-REAR<br /> |<br /> |''Discontinued - Not used''<br /> |2<br /> |-<br /> |4<br /> |41657002<br /> |COVER-PROXIMITY SENSOR HOUSING<br /> |<br /> |''Rear''<br /> |2<br /> |-<br /> |5<br /> |HW1065<br /> |SCREW-SHCS-#6-32 X 3/8&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |6<br /> |HW1066<br /> |WASHER-LOCK-#6<br /> |<br /> |<br /> |8<br /> |-<br /> |7<br /> |E0376<br /> |INDICATOR LIGHT<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |8<br /> |E0335<br /> |RECEPTACLE-5 PIN MALE<br /> |<br /> |''With 12&quot; lead''<br /> |2<br /> |-<br /> |9<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |N/A<br /> |GASKET-FRONT<br /> |<br /> |''Discontinued - Not used''<br /> |2<br /> |-<br /> |11<br /> |41657003<br /> |COVER-PROXIMITY SENSOR HOUSING<br /> |80252015<br /> |''Front''<br /> |2<br /> |-<br /> |12<br /> |HW0138<br /> |SCREW-FHSCS-#8-32 X 3/8&quot;<br /> |80252015<br /> |<br /> |8<br /> |-<br /> |13<br /> |HW0433<br /> |STUD-1/2-13 X 5&quot;<br /> |80252006<br /> | rowspan=&quot;5&quot; |''For units with Magnet Pivot Shaft only.'' <br /> <br /> ''See [Discontinued] Magnet Arm Configuration for units built prior to 11/01/14''<br /> |8<br /> |-<br /> |14<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |80252006<br /> |8<br /> |-<br /> |15<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |80252006<br /> |40<br /> |-<br /> |16<br /> |HW1002<br /> |SPRING-1/2&quot;<br /> |80252006<br /> |24<br /> |-<br /> |17<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |80252006<br /> |8<br /> |-<br /> |18<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |80252014<br /> | rowspan=&quot;4&quot; |''For units with independent Pivot Bearings only.'' <br /> <br /> ''See [Current] Magnet Arm Configuration for units built 11/01/14 to present)''<br /> |4<br /> |-<br /> |19<br /> |HW1002<br /> |SPRING-1/2&quot;<br /> |80252014<br /> |4<br /> |-<br /> |20<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |80252014<br /> |8<br /> |-<br /> |21<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |80252014<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Extractors built or replacement magnets shipped prior to October 2021 used multi-piece indicator lights with replaceable bulb and lens and are no longer available. Current indicator light is a 1-piece LED assembly. Replacement of any multi-piece component requires replacing entire assembly with current, 1-piece indicator light.''<br /> |}<br /> <br /> === '''''Magnet Cords (Rotary Actuator)''''' ===<br /> [[File:BE-TS Magnet Cords.png|alt=BE-TS Magnet Cords|frameless|555x555px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1105<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |''Weather proof box''<br /> |1<br /> |-<br /> |2<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |E1106<br /> |COVER-JUNCTION BOX<br /> |<br /> |''Weather proof with gasket'' <br /> |1<br /> |-<br /> |4<br /> |E0333<br /> |RECEPTACLE-9 PIN MALE<br /> |<br /> |''With 12&quot; lead''<br /> |1<br /> |-<br /> |5<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |6<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |7<br /> |E0334<br /> |CORD-5 PIN FEMALE<br /> |<br /> |''With 36&quot; lead''<br /> |2<br /> |-<br /> |8<br /> |E0332<br /> |CORD-9 PIN FEMALE-90 DEG<br /> |<br /> |''With 36&quot; lead''<br /> |1<br /> |-<br /> |9<br /> |PL0501<br /> |GROMMET-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |41657013-2<br /> |PLATE-PANEL MOUNTING<br /> |<br /> |''With single cable hole''<br /> |1<br /> |-<br /> |11<br /> |E0334-6<br /> |CORD-5 PIN FEMALE<br /> |<br /> |''With 72&quot; lead''<br /> |2<br /> |-<br /> |12<br /> |43057038-2<br /> |PLATE-PANEL MOUNTING<br /> |<br /> |''With dual cable holes''<br /> |1<br /> |}<br /> '''''&lt;big&gt;Magnet Panel Mounting (Rotary Actuator)&lt;/big&gt;'''''<br /> <br /> [[File:BE-TS Panel Mounting (Rotary Actuator).png|alt=BE-TS Panel Mounting (Rotary Actuator)|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43057021<br /> |PLATE-STIFFENER<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |''Not shown''<br /> |24<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |5<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |12<br /> |-<br /> |6<br /> |41637001<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0325<br /> |BOLT-5/16-18 X 1 3/4&quot;-PAN HEAD<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |N/A<br /> |INSULATOR-THREADED FEMALE<br /> |<br /> |''Discontinued''<br /> |4<br /> |-<br /> |9<br /> |HW0106<br /> |WASHER-FLAT-5/16&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0326<br /> |NUT-NILN-5/16-18<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |E1016<br /> |FUSE HOLDER<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |E0325<br /> |FUSE-7AMP-250VAC<br /> |<br /> |''FLM-7 or FNM-7''<br /> |1<br /> |-<br /> |16<br /> |PL0307<br /> |INSULATOR-MALE STUD<br /> |<br /> |<br /> |4<br /> |}<br /> '''''&lt;big&gt;Magnet Extractor Electrical Panel (Rotary Actuator)&lt;/big&gt;'''''<br /> <br /> [[File:BE-TS Magnet Extractor Electrical Panel (Rotary Actuator).png|alt=BE-TS Magnet Extractor Electrical Panel (Rotary Actuator)|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41637001<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41637002<br /> |WIRE WAY<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |41637003<br /> |WIRE WAY<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |41637004<br /> |TRACK-TERMINAL BLOCK MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |41637005<br /> |TRACK-TERMINAL BLOCK MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |7<br /> |HW0132<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |<br /> |10<br /> |-<br /> |8<br /> |HW0133<br /> |NUT-NILN-#8-32<br /> |<br /> |''Not shown''<br /> |16<br /> |-<br /> |9<br /> |E1020<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |12<br /> |-<br /> |10<br /> |E1040<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |E1330<br /> |END ANCHOR<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |E1009<br /> |RECTIFIER-FULL WAVE BRIDGE<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |HW0135<br /> |SCREW-RHMS-#8-32 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |E1313<br /> |SOCKET-RELAY-8 PIN<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0139<br /> |SCREW-RHMS-#8-32 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |E0331<br /> |RELAY-DPDT-110VAC<br /> |<br /> |''with Indicator Light''<br /> |2<br /> |}<br /> <br /> === &lt;big&gt;'''&lt;u&gt;Swing Arm Stop (Rotary Actuator)&lt;/u&gt;'''&lt;/big&gt; ===<br /> [[File:BE-TS Swing Arm Stop (Rotary Actuator).png|alt=BE-TS Swing Arm Stop (Rotary Actuator)|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055007<br /> |MOUNT-STOP-SWING ARM<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |2<br /> |43057024<br /> |STOP-SWING ARM<br /> |<br /> |''BE-24''<br /> |4<br /> |-<br /> |43057023<br /> |STOP-SWING ARM<br /> |<br /> |''BE-36 &amp; BE-42''<br /> |4<br /> |-<br /> |3<br /> |HW0304<br /> |BOLT-HHCS-1/4-20 X 1 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Vacuum_Swing_Arm_Stop_(Rotary_Actuator) Vacuum Swing Arm Stop (Rotary Actuator)] section for single compartment stop mount and stop.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Extended Reach (Rotary Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Vacuum Extended Reach (Rotary Actuator).png|alt=BE-TS Vacuum Extended Reach (Rotary Actuator)|frameless|536x536px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41257014<br /> |TIE PLATE-SWING ARM<br /> |<br /> |''All units''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |41655008<br /> |EXTENSION-ARM<br /> |<br /> |''BE-36 only (Not shown)''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |43455001<br /> |EXTENSION-ARM<br /> |<br /> |''BE-42 only (Not shown)''<br /> |1<br /> |-<br /> |2<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |P0301-1<br /> |HOSE-COIL-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |41257035<br /> |STANDOFF<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW1072<br /> |RESTRAINT-HOSE<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0318<br /> |BOLT-SHCS-1/4-20 X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |HW0312<br /> |SCREW-SHSS-1/4-20 X 1&quot;-CUP POINT<br /> |<br /> |<br /> |1<br /> |}<br /> [[File:BE-TS Vacuum Extended Reach (Rotary Actuator) 2.png|alt=BE-TS Vacuum Extended Reach (Rotary Actuator)|frameless|547x547px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41255005<br /> |ARM-EXTENSION-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0416<br /> |CYLINDER-EXTENDED REACH-VACUUM<br /> |<br /> |''2 1/2&quot; X 12&quot; Cylinder''<br /> |1<br /> |-<br /> |3<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JICM X #6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |41257031<br /> |PIN-CLEVIS END<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |00197036<br /> |PIN-ROD END<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1058<br /> |PIN-HITCH<br /> |<br /> |<br /> |4<br /> |}<br /> [[File:BE-TS Vacuum Extended Reach (Rotary Actuator) 3.png|alt=BE-TS Vacuum Extended Reach (Rotary Actuator) 3|frameless|541x541px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41255004<br /> |HOUSING-EXTENDED REACH-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41257030<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |41258002<br /> |PLATE-BEARING<br /> |80258001<br /> |''Side''<br /> |2<br /> |-<br /> |8<br /> |41258005<br /> |PLATE-SHIM<br /> |80258001<br /> |''Side''<br /> |2<br /> |-<br /> |9<br /> |41258003<br /> |PLATE-BEARING<br /> |80258001<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |10<br /> |41258004<br /> |PLATE-SHIM<br /> |80258001<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |11<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |28<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |28<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Extended Reach (Rotary Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Extended Reach Rotary Actuator.png|alt=BE-TS Extended Reach Rotary Actuator|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43046001<br /> |ROTARY ACTUATOR<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |80000002<br /> |ROTARY ACTUATOR BASE ASSEMBLY<br /> |<br /> |''Without Actuator''<br /> |1<br /> |-<br /> |2A<br /> |N/A<br /> |VERTICAL CARRIER PLATE-OUTER<br /> |<br /> |''Included with 80000002''<br /> |2<br /> |-<br /> |2B<br /> |N/A<br /> |VERTICAL CARRIER PLATE-INNER<br /> |<br /> |''Included with 80000002''<br /> |1<br /> |-<br /> |2C<br /> |N/A<br /> |CARRIER BASE PLATE<br /> |<br /> |''Included with 80000002''<br /> |1<br /> |-<br /> |3<br /> |HW1070<br /> |PIN-PULL DOWEL-5/8&quot; X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0508<br /> |BOLT-SHCS-1/2-13 X 3/4&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW1045<br /> |PIN-PULL DOWEL-3/8&quot; X 1 1/2&quot;<br /> |<br /> |''Included with 80000002''<br /> |6<br /> |-<br /> |6<br /> |HW0412<br /> |BOLT-SHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |''Included with 80000002''<br /> |12<br /> |-<br /> |7<br /> |H0010<br /> |FITTING-BULKHEAD-3/4-16 X #4 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |4<br /> |}<br /> [[File:BE-TS Extended Reach Rotary Actuator 2.png|alt=BE-TS Extended Reach Rotary Actuator |frameless|535x535px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PT0634<br /> |BRACKET-MALE END<br /> |<br /> |''Sols as a set''<br /> |1<br /> |-<br /> |2<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |10<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |PT0627<br /> |HOSE CARRIER<br /> |<br /> |''14 links required''<br /> |39&quot;<br /> |-<br /> |7<br /> |PT0634<br /> |BRACKET-FEMALE END<br /> |<br /> |''Sols as a set''<br /> |1<br /> |-<br /> |8<br /> |HC0262<br /> |VALVE-CROSS PORT RELIEF<br /> |<br /> |<br /> |1<br /> |-<br /> |8a<br /> |43046003<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''† For Item 8 (Not shown)''<br /> |2<br /> |-<br /> |9<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |H1546<br /> |ADAPTER-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |H1617<br /> |ADAPTER-45 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HC0237<br /> |VALVE-SEQUENCING<br /> |<br /> |<br /> |1<br /> |-<br /> |12a<br /> |43046005<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''† For Item 12 (Not shown)''<br /> |A/R<br /> |-<br /> |13<br /> |HW0317<br /> |BOLT-HHCS-1/4-20 X 3 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |H1560<br /> |ADAPTER-45 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |H1600<br /> |ADAPTER-90 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Cartridges are for replacement only''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Extended Reach (Rotary Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Extended Reach (Rotary Actuator).png|alt=BE-TS Magnet Extended Reach (Rotary Actuator)|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055011<br /> |ARM-EXTENSION-MAGNET<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0415<br /> |CYLINDER-EXTENDED REACH-MAGNET<br /> |<br /> |''2 1/2&quot; X 8&quot; Cylinder''<br /> |1<br /> |-<br /> |3<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JICM X #6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CLEVIS END<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-ROD END<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-EXTERNAL-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW1043<br /> |CLAMP-CYLINDER<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |43057044-2<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |43058019<br /> |SUPPORT-CABLE-BAND CLAMP<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> [[File:BE-TS Magnet Extended Reach (Rotary Actuator) 2.png|alt=BE-TS Magnet Extended Reach (Rotary Actuator) |frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055012<br /> |HOUSING-EXTENDED REACH-MAGNET<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |43058013<br /> |PLATE-BEARING-SIDE<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |43058016<br /> |PLATE-SHIM-SIDE<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |43058014<br /> |PLATE-BEARING-UPPER/LOWER<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43058015<br /> |PLATE-SHIM-UPPER/LOWER<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |24<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |24<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Extended Reach End Plate&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Extended Reach End Plate.png|alt=BE-TS Extended Reach End Plate|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |CARRIER SHAFT-EXTRACTOR ARM<br /> |<br /> |''† 3-Hole version''<br /> |A/R<br /> |-<br /> |2<br /> |PT0413<br /> |COLLAR-SHAFT-3&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |50057009<br /> |PLATE-END-3 HOLE<br /> |<br /> |''Replacement part only''<br /> |4<br /> |-<br /> |4<br /> |50057010<br /> |SHIM-END PLATE<br /> |<br /> |''†† See notes''<br /> |A/R<br /> |-<br /> |5<br /> |HW1076<br /> |BOLT-FHSCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |6<br /> |43057045<br /> |CARRIER SHAFT-EXTRACTOR ARM<br /> |<br /> |''1-Hole version''<br /> |2<br /> |-<br /> |7<br /> |43017076<br /> |PLATE-END-1 HOLE<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† 3-Hole Carrier Shaft no longer available. Must replace 3-Hole shaft with current, 1-Hole version along with new ennd plates &amp; hardware.'' <br /> |-<br /> | colspan=&quot;6&quot; |''†† Shim quantity varies due to manufacturing tolerances.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Carrier Shafts &amp; Bearings&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Carrier Shafts &amp; Bearings (Helical Actuator).png|alt=BE-TS Carrier Shafts &amp; Bearings (Helical Actuator)|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43057045<br /> |CARRIER SHAFT-EXTRACTOR ARM<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |2<br /> |43054007<br /> |BEARING-EXTRACTOR ARM CARRIER<br /> |80252002<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0412<br /> |BOLT-SHCS-3/8-16 X 1 1/4&quot;<br /> |80252002<br /> |<br /> |16<br /> |-<br /> |4<br /> |PT0413<br /> |COLLAR-SHAFT-3&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |50057010<br /> |SHIM-END PLATE<br /> |<br /> |<br /> |A/R<br /> |-<br /> |6<br /> |43017076<br /> |PLATE-END-1 HOLE<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |PT0624<br /> |FITTING-ZERK<br /> |80252002<br /> |''Not shown''<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Extended_Reach_End_Plate Extended Reach End Plate] section for Extended Reach equipped units.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Drive Nut Assembly (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Drive Nut Assembly (Helical Actuator).png|alt=BE-TS Drive Nut Assembly (Helical Actuator)|frameless|600x600px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43054006<br /> |DRIVE NUT ASSEMBLY<br /> |80252003<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0426<br /> |BOLT-SHCS-3/8-16 X 5 1/2&quot;<br /> |80252003<br /> |''† See notes''<br /> |4<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |80252003<br /> |''† See notes''<br /> |4<br /> |-<br /> |4<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |80252003<br /> |''† See notes''<br /> |4<br /> |-<br /> |5<br /> |PT0624<br /> |FITTING-ZERK<br /> |80252003<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† It is recommended to replce mounting hardware when replacing Drive Nut Assembly.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Swing Arms &amp; Actuator (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;[Discontinued] Helical Actuator&lt;/big&gt;''''' ====<br /> [[File:BE-TS Swing Arms &amp; Actuator (Helical Actuator).png|alt=BE-TS [Discontinued] Swing Arms &amp; Actuator (Helical Actuator)|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |HELICAL ACTUATOR<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |43057046<br /> |ACTUATOR BASE PLATE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43058022<br /> |SPACER-ACTUATOR<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0725<br /> |BOLT-HHCS-3/4-16 X 4-3/4&quot;-GR8<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0066<br /> |NUT-JAM-3/4-16-GR8<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43055013<br /> |SWING ARM-LHS<br /> |<br /> | rowspan=&quot;6&quot; |''†† See notes''<br /> |1<br /> |-<br /> |7<br /> |HW0620<br /> |BOLT-HHCS-5/8-11 X 1-1/4&quot;<br /> |<br /> |6<br /> |-<br /> |8<br /> |HW0013<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |6<br /> |-<br /> |9<br /> |43055014<br /> |SWING ARM-RHS<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1-1/4&quot;<br /> |<br /> |6<br /> |-<br /> |11<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |6<br /> |-<br /> |12<br /> |43042008<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |43042010<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE, LONG<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |H1619<br /> |ADAPTER-90 DEG-#6 JICM X #4 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |H0010<br /> |FITTING-H-BULKHEAD-1/4 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |H1504<br /> |ADAPTER-#6 JICM X #4 NPTM<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW1082<br /> |CLAMP-HOSE<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Discontinued Helical Actuator no longer available. Must replace with current Helical Actuator Retro Kit 80252032. See [Current] Helical Actuator.'' <br /> <br /> ''†† Swing arms manufactured prior to January 2022 use 10 bolts &amp; washers per Swing Arm.'' <br /> |}<br /> <br /> ==== '''''&lt;big&gt;[Current] Helical Actuator&lt;/big&gt;''''' ====<br /> [[File:BE-TS (Current) Swing Arms &amp; Actuator (Helical Actuator).png|alt=BE-TS (Current) Swing Arms &amp; Actuator (Helical Actuator)|frameless|544x544px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |N/A<br /> |43052020<br /> |HELICAL ACTUATOR ASSEMBLY<br /> |<br /> |''Includes Items 1 through 17''<br /> |1<br /> |-<br /> |1<br /> |HC0180<br /> |HELICAL ACTUATOR<br /> |80252032<br /> |<br /> |1<br /> |-<br /> |2<br /> |43057046<br /> |ACTUATOR BASE PLATE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43058022<br /> |SPACER-ACTUATOR<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0725<br /> |BOLT-HHCS-3/4-16 X 4-3/4&quot;-GR8<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0066<br /> |NUT-JAM-3/4-16-GR8<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43055013<br /> |SWING ARM-LHS<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0620<br /> |BOLT-HHCS-5/8-11 X 1-1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |8<br /> |HW0013<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |9<br /> |43055014<br /> |SWING ARM-RHS<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1-1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |11<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |12<br /> |43042011<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE, 90 DEG<br /> |80252032<br /> |''† See notes''<br /> |1<br /> |-<br /> |13<br /> |43042012<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE, SHORT<br /> |80252032<br /> |''† See notes''<br /> |1<br /> |-<br /> |14<br /> |H1619<br /> |ADAPTER-90 DEG-#6 JICM X #4 SAEM<br /> |80252032<br /> |<br /> |2<br /> |-<br /> |15<br /> |H0010<br /> |FITTING-H-BULKHEAD-1/4 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |H1504<br /> |ADAPTER-#6 JICM X #4 NPTM<br /> |80252032<br /> |<br /> |1<br /> |-<br /> |17<br /> |H1691<br /> |ADAPTER-45 DEG-#6 JICM X #4 NPTM<br /> |80252032<br /> |''† See notes''<br /> |1<br /> |-<br /> |18<br /> |HW1082<br /> |CLAMP-HOSE<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Hard-Pipes and 45 degree adapter required if replacing discontinued actuator with current Actuator Kit Part # 80252032 required for discontinued actuator replacement.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Swing Arm Stops &amp; Tie Plate&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Swing Arm Stops &amp; Tie Plate (Helical Actuator).png|alt=BE-TS Swing Arm Stops &amp; Tie Plate (Helical Actuator)|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43057050<br /> |TIE PLATE-HELICAL SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0113<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0010<br /> |NUT-JAM-5/8-11<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |43057052<br /> |STOP-POLY-SWING ARM<br /> |<br /> |''† See notes''<br /> |4<br /> |-<br /> |6<br /> |HW0441<br /> |BOLT-FHSCS-3/8-16 X 1-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW0031<br /> |NUT-LOCK-3/8-16, DEFORMED THREAD<br /> |<br /> |''† † See notes''<br /> |4<br /> |-<br /> |8<br /> |44555002<br /> |SWING ARM STOP<br /> |<br /> |''Single compartment use only''<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Replacement Poly Stop design updated from Square to Round. Stop Spacers not required with current, Round-Style Stops.''<br /> |-<br /> | colspan=&quot;6&quot; |''† † Deformed Thread Lock Nut replaces Acorn Nut and Split Lock Washer used previously.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Push/Pull Arm Mounting (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Push-Pull Arm Mounting.png|alt=BE-TS Push-Pull Arm Mounting (Helical Actuator)|frameless|542x542px]]<br /> {| class=&quot;wikitable&quot;<br /> ! rowspan=&quot;2&quot; |ITEM<br /> ! rowspan=&quot;2&quot; |BHS PART NUMBER<br /> ! rowspan=&quot;2&quot; |DESCRIPTION<br /> ! rowspan=&quot;2&quot; |REF. KIT NO.<br /> ! rowspan=&quot;2&quot; |NOTES<br /> ! colspan=&quot;3&quot; |NO. REQ<br /> |-<br /> !BE-24<br /> !BE-36<br /> !BE-42<br /> |-<br /> | rowspan=&quot;2&quot; |1<br /> |41655008<br /> |EXTENSION-ARM<br /> |<br /> |''†BE-36 units only''<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |1<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |43455001<br /> |EXTENSION-ARM<br /> |<br /> |''†BE-42 units only''<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |1<br /> |-<br /> |2<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> | colspan=&quot;2&quot; |12<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |12<br /> | colspan=&quot;2&quot; |24<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> | colspan=&quot;2&quot; |12<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |6<br /> | colspan=&quot;2&quot; |12<br /> |-<br /> ! colspan=&quot;8&quot; |NOTES<br /> |-<br /> | colspan=&quot;8&quot; |''† BE-24 units do not utilize an Arm Extension.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Extractor Arm (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Non-Pivoting Vacuum Cup Arm (Helical Actuator)&lt;/big&gt;''''' ====<br /> [[File:BE-TS Non-Pivoting Vacuum Cup Arm (Helical Actuator).png|alt=BE-TS Non-Pivoting Vacuum Cup Arm (Helical Actuator)|frameless|578x578px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0428<br /> |STUD-VACUUM-3/8-16 X 5&quot;<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |2<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |HW-KIT-2<br /> |<br /> |40<br /> |-<br /> |3<br /> |HW1001<br /> |SPRING-3/8&quot;<br /> |HW-KIT-2<br /> |<br /> |24<br /> |-<br /> |4<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0424<br /> |NUT-JAM-3/8-16<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |6<br /> |P0402<br /> |HOSE BARB-1/4&quot; X #4 MNPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |REF<br /> |43052014<br /> |ADJUSTABLE PUSH-PULL ARM<br /> |<br /> |''Includes Items 7 through 11''<br /> |A/R<br /> |-<br /> |7<br /> |43055018<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |43055019<br /> |VACUUM CUP MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Pivoting Vacuum Cup Arm (Helical Actuator)&lt;/big&gt;''''' ====<br /> [[File:BE-TS Pivoting Vacuum Cup Arm (Helical Actuator).png|alt=BE-TS Pivoting Vacuum Cup Arm (Helical Actuator)|frameless|525x525px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43052014<br /> |ADJUSTABLE PUSH-PULL ARM<br /> |<br /> |''Includes Items 1 through 5''<br /> |A/R<br /> |-<br /> |1<br /> |43055018<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43055019<br /> |VACUUM CUP MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |43055020<br /> |MOUNT-PIVOT-VACUUM CUP<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |PT0470<br /> |BEARING-PIVOT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0525<br /> |BOLT-CARRIAGE-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |9<br /> |HW0524<br /> |BOLT-CARRIAGE-1/2-13 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |11<br /> |HW0008<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |16<br /> |-<br /> |12<br /> |43058009<br /> |PLATE-ROTATION STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |43058003<br /> |SLEEVE-STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |43058010<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |4<br /> |-<br /> |16<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |43037002-2<br /> |SUPPORT-CABLE RESTRAINT<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |21<br /> |P0506<br /> |ELBOW-STR-90 DEG-#4 NPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |22<br /> |P0402<br /> |HOSE BARB-1/4&quot; X #4 MNPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |23<br /> |43057056-2<br /> |BRACKET-HOSE SUPPORT<br /> |<br /> |<br /> |2<br /> |-<br /> |24<br /> |PL0507<br /> |GROMMET-5/8&quot; I.D.<br /> |<br /> |<br /> |2<br /> |-<br /> |25<br /> |P0302<br /> |HOSE-VACUUM-1/4&quot; I.D.<br /> |<br /> |''2 pieces at 48&quot; each''<br /> |96&quot;<br /> |-<br /> |26<br /> |HW0443<br /> |BOLT-HHCS-3/8-16 X 3-1/2&quot;<br /> |HW-KIT-3<br /> |<br /> |8<br /> |-<br /> |27<br /> |HW1001<br /> |SPRING-3/8&quot;<br /> |HW-KIT-3<br /> |<br /> |16<br /> |-<br /> |28<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |HW-KIT-3<br /> |<br /> |32<br /> |-<br /> |29<br /> |HW0424<br /> |NUT-JAM-3/8-16<br /> |HW-KIT-3<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Cup Rotation Stop (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Vacuum Cup Rotation Stop (Helical Actuator).png|alt=BE-TS Vacuum Cup Rotation Stop (Helical Actuator)|frameless|583x583px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |445558001<br /> |PLATE-ROTATION STOP<br /> |<br /> |''† Single compartment units only''<br /> |2<br /> |-<br /> |2<br /> |HW0525<br /> |BOLT-CARRIAGE-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0524<br /> |BOLT-CARRIAGE-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0008<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Components (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Vacuum Components (Helical Actuator).png|alt=BE-TS Vacuum Components (Helical Actuator)|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43058021<br /> |STIFFENER PLATE-HELICAL SWING ARM<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |24<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |5<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |12<br /> |-<br /> |6<br /> |P0005<br /> |PUMP-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |P0207<br /> |VALVE-VACUUM RELEASE<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |P0208<br /> |FILTER-HI FLOW<br /> |<br /> |<br /> |3<br /> |-<br /> |9<br /> |H0011<br /> |NIPPLE-#4 X 2&quot;-BRASS<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |P0502<br /> |TEE-#4 FNPT-BRASS<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |P0506<br /> |ELBOW-STR-90 DEG-#4 NPT-BRASS<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |P0503<br /> |NIPPLE-#4 NPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |P0402<br /> |HOSE BARB-1/4&quot; X #4 MNPT-BRASS<br /> |<br /> |<br /> |6<br /> |-<br /> |14<br /> |P0111<br /> |FILTER-VACUUM-IN-LINE<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0206<br /> |SCREW-RHMS-#10-32 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |43037014-2<br /> |BRACKET-CABLE RESTRAINT<br /> |<br /> |<br /> |1<br /> |-<br /> |17<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |18<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |21<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |22<br /> |E0624<br /> |CONNECTOR-1/2&quot;<br /> |<br /> |''Includes Lock Nut''<br /> |1<br /> |-<br /> |23<br /> |HW0212<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Arm (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Arm (Helical Actuator).png|alt=BE-TS Magnet Arm (Helical Actuator)|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43052014<br /> |ADJUSTABLE PUSH-PULL ARM<br /> |<br /> |''Includes Items 1 through 5''<br /> |A/R<br /> |-<br /> |1<br /> |43055018<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43055019<br /> |VACUUM CUP MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |43055016<br /> |MOUNT-PIVOT-MAGNET<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |PT0470<br /> |BEARING-PIVOT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0525<br /> |BOLT-CARRIAGE-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |9<br /> |HW0524<br /> |BOLT-CARRIAGE-1/2-13 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |11<br /> |HW0008<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |16<br /> |-<br /> |12<br /> |43058009<br /> |PLATE-ROTATION STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |43058003<br /> |SLEEVE-STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |43058010<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |18<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |43037002-2<br /> |SUPPORT-CABLE RESTRAINT<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |21<br /> |E0334-6'<br /> |CORD-5 PIN FEMALE<br /> |<br /> |''With 72&quot; lead''<br /> |2<br /> |-<br /> |22<br /> |E1041<br /> |WIRE LOOM-SPIRAL-3/8&quot;<br /> |<br /> |''2 pieces at 24&quot; each''<br /> |48&quot;<br /> |-<br /> |23<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |2<br /> |-<br /> |24<br /> |43057037<br /> |INSULATOR-BOTTOM<br /> |<br /> |<br /> |2<br /> |-<br /> |25<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |26<br /> |41657008<br /> |SLIDE-MAGNET<br /> |<br /> |<br /> |2<br /> |-<br /> |27<br /> |HW0314<br /> |BOLT-FHSCS-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Assembly (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Assembly (Helical Actuator).png|alt=BE-TS Magnet Assembly (Helical Actuator)|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43032009<br /> |MAGNET ASSEMBLY<br /> |<br /> |''Includes Items 1 through 12''<br /> |A/R<br /> |-<br /> |1<br /> |N/A<br /> |ELECTROMAGNET-95VDC<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |E0314<br /> |SENSOR-PROXIMITY-30MM<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |41657002<br /> |COVER-PROXIMITY SENSOR HOUSING<br /> |<br /> |''Rear''<br /> |2<br /> |-<br /> |4<br /> |HW1065<br /> |SCREW-SHCS-#6-32 X 3/8&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW1066<br /> |WASHER-LOCK-#6<br /> |<br /> |<br /> |8<br /> |-<br /> |6<br /> |E0335<br /> |RECEPTACLE-5 PIN MALE<br /> |<br /> |''With 12&quot; lead''<br /> |2<br /> |-<br /> |7<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |E0376<br /> |INDICATOR LIGHT<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |9<br /> |41657003<br /> |COVER-PROXIMITY SENSOR HOUSING<br /> |80252015<br /> |''Front''<br /> |2<br /> |-<br /> |10<br /> |HW0138<br /> |SCREW-FHSCS-#8-32 X 3/8&quot;<br /> |80252015<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |80252014<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW1002<br /> |SPRING-1/2&quot;<br /> |80252014<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |80252014<br /> |<br /> |8<br /> |-<br /> |14<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |80252014<br /> |<br /> |4<br /> |-<br /> |15<br /> |E0336<br /> |METAL OXIDE VARISTOR<br /> |<br /> |''Not shown''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Extractors built or replacement magnets shipped prior to October 2021 used Multi-Piece Indicator Lights with replaceable bulb and lens and are no longer available. Current Indicator Light is a 1-Piece LED assembly. Replacement of any Multi-Piece component requires replacing entire assembly with current, 1-Piece Indicator Light.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Components (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Components (Helical Actuator).png|alt=BE-TS Magnet Components (Helical Actuator)|frameless|534x534px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43058021<br /> |STIFFENER PLATE-HELICAL SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43057051-2<br /> |STIFFENER-MAGNET-HELICAL SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |4<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |24<br /> |-<br /> |5<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |6<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |12<br /> |-<br /> |7<br /> |PL0307<br /> |INSULATOR-MALE STUD<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0106<br /> |WASHER-FLAT-5/16&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |HW0105<br /> |WASHER-LOCK-5/16&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0004<br /> |NUT-HEX-5/16-18<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |12<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |13<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |14<br /> |E1016<br /> |FUSE HOLDER<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |E0325<br /> |FUSE-7 AMP-250VAC<br /> |<br /> |''FLM-7 or FNM-7''<br /> |1<br /> |-<br /> |16<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |17<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Panel (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Panel (Helical Actuator).png|alt=BE-TS Magnet Panel (Helical Actuator)|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41637001<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41637002<br /> |WIRE WAY-SHORT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |41637003<br /> |WIRE WAY-LONG<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |41637004<br /> |TRACK-MOUNTING-SHORT<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |41637005<br /> |TRACK-MOUNTING-LONG<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> | rowspan=&quot;3&quot; |''Mounting track hardware (Not shown)''<br /> |10<br /> |-<br /> |7<br /> |HW0132<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |10<br /> |-<br /> |8<br /> |HW0133<br /> |NUT-NILN-#8-32<br /> |<br /> |16<br /> |-<br /> |9<br /> |E1020<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |12<br /> |-<br /> |10<br /> |E1040<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |E1330<br /> |END ANCHOR<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |E1009<br /> |RECTIFIER-FULL WAVE BRIDGE<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |HW0135<br /> |SCREW-RHMS-#8-32 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |E1313<br /> |SOCKET-RELAY-8 PIN<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |E0331<br /> |RELAY-DPDT-110VAC<br /> |<br /> |''With Indicator Light''<br /> |2<br /> |-<br /> |16<br /> |HW0139<br /> |SCREW-RHMS-#8-32 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Extended Reach Hydraulics (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== &lt;big&gt;''[Discontinued] Helical Actuator''&lt;/big&gt; ====<br /> [[File:BE-TS (Discontinued) Helical Actuator.png|alt=BE-TS (Discontinued) Helical Actuator|frameless|546x546px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43042009<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |H0010<br /> |FITTING-BULKHEAD-3/4-16 X #4 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |43055017<br /> |ELBOW-BULKHEAD<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> | rowspan=&quot;3&quot; |7<br /> |4-48-0402-0402<br /> |HYD HOSE-1/4&quot; X 48&quot; (BE-24 UNITS)<br /> |<br /> | rowspan=&quot;3&quot; |''Cylinder rod-end hose''<br /> | rowspan=&quot;3&quot; |1<br /> |-<br /> |4-54-0402-0402<br /> |HYD HOSE-1/4&quot; X 54&quot; (BE-36 UNITS)<br /> |<br /> |-<br /> |4-56-0402-0402<br /> |HYD HOSE-1/4&quot; X 56&quot; (BE-42 UNITS)<br /> |<br /> |-<br /> | rowspan=&quot;3&quot; |8<br /> |4-38-0402-0402<br /> |HYD HOSE-1/4&quot; X 38&quot; (BE-24 UNITS)<br /> |<br /> | rowspan=&quot;3&quot; |''Cylinder rod-end hose''<br /> | rowspan=&quot;3&quot; |1<br /> |-<br /> |4-44-0402-0402<br /> |HYD HOSE-1/4&quot; X 44&quot; (BE-36 UNITS)<br /> |<br /> |-<br /> |4-46-0402-0402<br /> |HYD HOSE-1/4&quot; X 46&quot; (BE-42 UNITS)<br /> |<br /> |-<br /> |9<br /> |41257035<br /> |STANDOFF-HOSE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW1093<br /> |CLAMP-CABLE-3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0311<br /> |BOLT-FHSCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> ==== &lt;big&gt;''[Current] Helical Actuator''&lt;/big&gt; ====<br /> [[File:BE-TS (Current) Helical Actuator.png|alt=BE-TS (Current) Helical Actuator|frameless|567x567px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43042013<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |H0010<br /> |FITTING-BULKHEAD-3/4-16 X #4 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |43055021<br /> |ELBOW-BULKHEAD<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> | rowspan=&quot;3&quot; |7<br /> |4-48-0402-0402<br /> |HYD HOSE-1/4&quot; X 48&quot; (BE-24 UNITS)<br /> |<br /> | rowspan=&quot;3&quot; |''Cylinder rod-end hose''<br /> | rowspan=&quot;3&quot; |1<br /> |-<br /> |4-54-0402-0402<br /> |HYD HOSE-1/4&quot; X 54&quot; (BE-36 UNITS)<br /> |<br /> |-<br /> |4-56-0402-0402<br /> |HYD HOSE-1/4&quot; X 56&quot; (BE-42 UNITS)<br /> |<br /> |-<br /> | rowspan=&quot;3&quot; |8<br /> |4-38-0402-0402<br /> |HYD HOSE-1/4&quot; X 38&quot; (BE-24 UNITS)<br /> |<br /> | rowspan=&quot;3&quot; |''Cylinder rod-end hose''<br /> | rowspan=&quot;3&quot; |1<br /> |-<br /> |4-44-0402-0402<br /> |HYD HOSE-1/4&quot; X 44&quot; (BE-36 UNITS)<br /> |<br /> |-<br /> |4-46-0402-0402<br /> |HYD HOSE-1/4&quot; X 46&quot; (BE-42 UNITS)<br /> |<br /> |-<br /> |9<br /> |41257035<br /> |STANDOFF-HOSE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW1093<br /> |CLAMP-CABLE-3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0311<br /> |BOLT-FHSCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Extended Reach (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== &lt;big&gt;'''''Non-Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator)'''''&lt;/big&gt; ====<br /> [[File:BE-TS Non-Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator).png|alt=BE-TS Non-Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator)|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41255005<br /> |ARM-EXTENSION<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41255004<br /> |HOUSING-EXTENDED REACH<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0416<br /> |CYLINDER-2 1/2&quot; X 12&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CYLINDER-REAR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-CYLINDER-ROD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JIC X # 6 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |28<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |28<br /> |-<br /> |15<br /> |41258002<br /> |PLATE-BEARING<br /> |80258001<br /> |''Side''<br /> |2<br /> |-<br /> |16<br /> |41258005<br /> |PLATE-SHIM<br /> |80258001<br /> |''Side''<br /> |2<br /> |-<br /> |17<br /> |41258003<br /> |PLATE-BEARING<br /> |80258001<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |18<br /> |41258004<br /> |PLATE-SHIM<br /> |80258001<br /> |''Upper / lower''<br /> |2<br /> |}<br /> &lt;big&gt;'''''Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator)'''''&lt;/big&gt;<br /> <br /> [[File:BE-TS Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator).png|alt=BE-TS Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator)|frameless|553x553px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055011<br /> |ARM-EXTENSION<br /> |<br /> |''Pivoting cup only''<br /> |1<br /> |-<br /> |2<br /> |43055012<br /> |HOUSING-EXTENDED REACH<br /> |<br /> |''Pivoting cup only''<br /> |1<br /> |-<br /> |3<br /> |HC0415<br /> |CYLINDER-2 1/2&quot; X 8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CYLINDER-REAR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-CYLINDER-ROD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JIC X # 6 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |24<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |24<br /> |-<br /> |15<br /> |43058013<br /> |PLATE-BEARING<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |16<br /> |43058016<br /> |PLATE-SHIM<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |17<br /> |43058014<br /> |PLATE-BEARING<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |18<br /> |43058015<br /> |PLATE-SHIM<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |19<br /> |HW1043<br /> |CLAMP-CYLINDER<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |43058019<br /> |SUPPORT-CABLE-BAND CLAMP<br /> |<br /> |<br /> |2<br /> |-<br /> |21<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |22<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |23<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |24<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Extended Reach (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== &lt;big&gt;'''''[Discontinued] Extended Reach Magnet Arm (Helical Actuator)'''''&lt;/big&gt; ====<br /> [[File:BE-TS (Discontinued) Extended Reach Magnet Arm (Helical Actuator).png|alt=BE-TS (Discontinued) Extended Reach Magnet Arm (Helical Actuator)|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055011<br /> |ARM-EXTENSION<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43055012<br /> |HOUSING-EXTENDED REACH<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0415<br /> |CYLINDER-2 1/2&quot; X 8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CYLINDER-REAR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-CYLINDER-ROD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JIC X # 6 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |24<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |24<br /> |-<br /> |15<br /> |43058013<br /> |PLATE-BEARING<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |16<br /> |43058016<br /> |PLATE-SHIM<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |17<br /> |43058014<br /> |PLATE-BEARING<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |18<br /> |43058015<br /> |PLATE-SHIM<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |19<br /> |HW1043<br /> |CLAMP-CYLINDER<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |43058019<br /> |SUPPORT-CABLE-BAND CLAMP<br /> |<br /> |<br /> |2<br /> |-<br /> |21<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |24<br /> |43057004-2<br /> |SUPPORT-CABLE-MAGNET<br /> |<br /> |<br /> |2<br /> |}<br /> &lt;big&gt;'''''[Current] Extended Reach Magnet Arm (Helical Actuator)'''''&lt;/big&gt;<br /> <br /> [[File:BE-TS (Current) Extended Reach Magnet Arm (Helical Actuator).png|alt=BE-TS (Current) Extended Reach Magnet Arm (Helical Actuator)|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |50055004<br /> |ARM-EXTENSION<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |50055005<br /> |HOUSING-EXTENDED REACH<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0415<br /> |CYLINDER-2 1/2&quot; X 8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CYLINDER-REAR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-CYLINDER-ROD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JIC X # 6 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |20<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |20<br /> |-<br /> |15<br /> |50058009<br /> |PLATE-BEARING<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |16<br /> |50058012<br /> |PLATE-SHIM<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |17<br /> |50058010<br /> |PLATE-BEARING<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |18<br /> |50058011<br /> |PLATE-SHIM<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |19<br /> |HW1043<br /> |CLAMP-CYLINDER<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |43058019<br /> |SUPPORT-CABLE-BAND CLAMP<br /> |<br /> |<br /> |2<br /> |-<br /> |21<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |24<br /> |43057004-2<br /> |SUPPORT-CABLE-MAGNET<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> == &lt;big&gt;Drive and Idler Wheels&lt;/big&gt; ==<br /> <br /> === &lt;big&gt;&lt;u&gt;Drive Wheel Mounting&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Drive Wheel Mounting.png|alt=BE-TS Drive Wheel Mounting|frameless|519x519px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0503<br /> |BOLT-HHCS-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |2<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |''Cylinder Bracket bolt only''<br /> |2<br /> |-<br /> |3<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> === &lt;big&gt;&lt;u&gt;Drive Wheel Motors&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Drive Wheel Motors.png|alt=BE-TS Drive Wheel Motors|frameless|535x535px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;2&quot; |1<br /> |43822001-6B<br /> |FLOOR DRIVE ASSEMBLY (W/ 200CC MOTOR)<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |43822004-6B<br /> |FLOOR DRIVE ASSEMBLY (W/ 400CC MOTOR)<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |2<br /> |43827004<br /> |PLATE-MOTOR MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0416<br /> |BOLT-SHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |H1612<br /> |ADAPTER-90 DEG-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |N/A<br /> |ROD-THREADED-1/2-13 X 7 3/4&quot;<br /> |<br /> |''†† See notes''<br /> |8<br /> |-<br /> |7<br /> |N/A<br /> |SPACER-DRIVE WHEEL-4.75&quot; LG<br /> |<br /> |''†† See notes''<br /> |8<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |43827006<br /> |SPACER-DRIVE WHEEL-4.125&quot; LG<br /> |<br /> |Must be ordered as a set of 4<br /> |8<br /> |-<br /> |11<br /> |HW0516<br /> |BOLT-HHCS-1/2-13 X 6 1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |12<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> | rowspan=&quot;2&quot; |13<br /> |N/A<br /> |MOTOR-HYDRAULIC-200CC<br /> |<br /> |''††† Keyed Shaft''<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |N/A<br /> |MOTOR-HYDRAULIC-400CC<br /> |<br /> |''††† Keyed Shaft''<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |14<br /> |HW1071<br /> |KEY-WOODRUFF-#808 STD<br /> |<br /> |<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |15<br /> |HC0124-6B<br /> |MOTOR-HYDRAULIC-200CC<br /> |<br /> |''† Spline Shaft''<br /> |2<br /> |-<br /> |HC0126-6B<br /> |MOTOR-HYDRAULIC-400CC<br /> |80322003<br /> |''† Spline Shaft''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† 200CC Motors required for units equipped with Parallel Drive Circuit.''<br /> ''400CC Motors required for units equipped with Series Drive Circuit.''<br /> <br /> ''See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Cross_Port_Relief Cross Port Relief] section to determine if unit is Parallel or Series equipped and approximate effectivity of each type.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Parts obsolete and no longer available. Must replace with Items 10 &amp; 11.''<br /> |-<br /> | colspan=&quot;6&quot; |''††† Parts obsolete and no longer available. Must replace with Spline Drive Conversion Kit.''<br /> |-<br /> | colspan=&quot;6&quot; |'''''NOTE:''' Effectivity dates refer to dates new extractor units are shipped from the factory. Replacement part effectivity &lt;u&gt;may&lt;/u&gt; differ due to factory inventory levels at time of parts order. Consult factory if unsure of parts needed.''<br /> |}<br /> <br /> === &lt;big&gt;&lt;u&gt;Drive Wheel Bearings&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Drive Wheel Bearings.png|alt=BE-TS Drive Wheel Bearings|frameless|537x537px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43825001<br /> |FRAME-FLOOR DRIVE<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |C0510-1<br /> |WHEEL-10&quot; X 5&quot;-POLY<br /> |80322001<br /> |<br /> |2<br /> |-<br /> |3<br /> |43822003<br /> |SHAFT-WHEEL (W/ COUPLING BODY)<br /> |<br /> |''Available in multiple kits''<br /> |2<br /> |-<br /> |4<br /> |43897004<br /> |KEY-3/8&quot; X 4 3/4&quot;<br /> |80322001<br /> |<br /> |2<br /> |-<br /> |5<br /> |PT0430<br /> |FLANGE BEARING-4 BOLT-1 1/2&quot;<br /> |80322001<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |7<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |16<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |9<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |16<br /> |-<br /> |10<br /> |PT0321<br /> |CHAIN-COUPLING-#50<br /> |<br /> |''Includes connecting pin''<br /> |2<br /> |-<br /> |11<br /> |N/A<br /> |COUPLING BODY-TAPER BORE-#50<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |12<br /> |N/A<br /> |BUSHING-TAPER LOCK-1&quot;<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |13<br /> |HW0323<br /> |BOLT-HHCS-5/16-18 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |14<br /> |PT0330<br /> |COUPLING BODY-#50-SPLINE BORE<br /> |80322003<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW1110<br /> |RETAINING RING-1 1/2&quot;-HEAVY DUTY<br /> |<br /> |''†† Available in multiple kits''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Parts obsolete and no longer available. Spline Drive Conversion Kit required. Reuse of bushing after disassembly not recommended.'' <br /> |-<br /> | colspan=&quot;6&quot; |''† † Retaining Rings used on units shipped after 7/01/12. Units shipped from 7/01/13 are equipped with (2) Retaining Rings per shaft - (1) on each side of the wheel. Units shipped after 11/01/13 are equipped with only (1) Snap Rings as shown. Second Snap Ring is no longer used or required.''<br /> |-<br /> | colspan=&quot;6&quot; |''NOTE: Effectivity dates refer to dates new extractor units are shipped from the factory. Replacement part effectivity &lt;u&gt;'''may'''&lt;/u&gt; differ due to factory inventory levels at time of parts order. Consult factory if unsure of parts needed.''<br /> |}<br /> <br /> === &lt;big&gt;&lt;u&gt;Drive Wheel Assembly&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Drive Wheel Assembly.png|alt=BE-TS Drive Wheel Assembly|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43822005<br /> |RADIAL PISTON DRIVE WHEEL ASSEMBLY<br /> |<br /> |''Includes Items 1 through 6''<br /> |2<br /> |-<br /> |1<br /> |43825003<br /> |RADIAL PISTON DRIVE WHEEL MOUNT<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0160-1<br /> |400CC RADIAL PISTON MOTOR<br /> |<br /> |''Includes nuts &amp; studs''<br /> |1<br /> |-<br /> |REF<br /> |HC0160-STUD<br /> |STUD-M14-1.5 X 46MM<br /> |<br /> |''Replacement motor stud''<br /> |A/R<br /> |-<br /> |REF<br /> |HC0160-NUT<br /> |NUT-FLANGED HEX-M14-1.5<br /> |<br /> |''Replacement motor nut''<br /> |A/R<br /> |-<br /> |3<br /> |C0511<br /> |WHEEL-POLY-10 X 5&quot;-FLANGE MOUNT<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |5<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |6<br /> |-<br /> |7<br /> |H1612<br /> |ADAPTER-H-90 DEG-#10 SAEM X #8 JICM<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |H1539<br /> |ADAPTER-#8 JIC X #6 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1586<br /> |ADAPTER-90 DEG-#8 JICSW X #6 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |H0801<br /> |TEE-H-#6 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H1501<br /> |ADAPTER-#8 JIC X #6 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |H0200<br /> |REDUCER-#6 NPT X #4 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |H0206<br /> |PLUG-#4 NPT<br /> |<br /> |''† Left Drive Wheel only''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Plug used on Left Drive Wheel Assembly only. Hose from Left Drive Wheel Assembly is connected to tee on Right Drive Wheel Assembly.'' <br /> |}<br /> <br /> === &lt;big&gt;&lt;u&gt;Idler Casters&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Idler Casters.png|alt=BE-TS Idler Casters|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |C0500-1<br /> |CASTER-RIGID-10&quot; X 5&quot;-POLY<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |3<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |<br /> |''For Cylinder Bracket position'' <br /> |2<br /> |-<br /> |4<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |16<br /> |-<br /> |5<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |6<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> == &lt;big&gt;Electrical&lt;/big&gt; ==<br /> <br /> === &lt;u&gt;&lt;big&gt;AC Power Stanchion&lt;/big&gt;&lt;/u&gt; ===<br /> <br /> ==== &lt;big&gt;''Aero-Motive Energy Rail''&lt;/big&gt; ====<br /> [[File:BE-TS Aero-Motive Energy Rail.png|alt=BE-TS Aero-Motive Energy Rail|frameless|536x536px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43835001<br /> |STANCHION-POWER<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0511<br /> |BOLT-HHCS-1/2-13 X 3 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |46837014-2<br /> |TOW ARM-COLLECTOR TROLLEY<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |46838015<br /> |SPACER BLOCK-TOW ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW1030<br /> |U-BOLT-3/8-16 X 2&quot; X 5&quot;-SQUARE BEND<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .625&quot; to .750&quot;''<br /> |1<br /> |-<br /> |13<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |HW1051<br /> |EYE BOLT-3/8-16 X 5 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0126<br /> |WASHER-FLAT-3/8&quot;-FENDER<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |BD0010<br /> |TROLLEY-ENERGY RAIL<br /> |<br /> | rowspan=&quot;2&quot; |''Aero-Motive Rail only''<br /> <br /> ''(orange housing color)''<br /> |1<br /> |-<br /> |19<br /> |BD0100<br /> |BRUSH-TROLLEY<br /> |<br /> |4<br /> |}<br /> <br /> ==== '''&lt;big&gt;''Vahle Energy Rail''&lt;/big&gt;''' ====<br /> [[File:BE-TS Vahle Energy Rail.png|alt=BE-TS Vahle Energy Rail|frameless|535x535px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1A<br /> |BD0031<br /> |TROLLEY-ENERGY RAIL, KSL<br /> |<br /> | rowspan=&quot;3&quot; |''† Vahle KSL Rail only''<br /> <br /> ''(green housing color)''<br /> |1<br /> |-<br /> |2A<br /> |BD0040<br /> |BRUSH-PHASE, KSL<br /> |<br /> |3<br /> |-<br /> |3A<br /> |BD0041<br /> |BRUSH-GROUND, KSL<br /> |<br /> |1<br /> |-<br /> |1B<br /> |BD0231<br /> |TROLLEY-ENERGY RAIL, KBH<br /> |<br /> | rowspan=&quot;3&quot; |''† Vahle KBH Rail only''<br /> <br /> ''(gray housing color)''<br /> <br /> ''(Nots shown)''<br /> |1<br /> |-<br /> |2B<br /> |BD0240<br /> |BRUSH-PHASE, KBH<br /> |<br /> |3<br /> |-<br /> |3B<br /> |BD0241<br /> |BRUSH-GROUND, KBH<br /> |<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |4<br /> |BD0030<br /> |TOW ARM-COLLECTOR TROLLEY, KSL<br /> |<br /> |''† Vahle KSL Rail only''<br /> <br /> ''(green housing color)''<br /> |1<br /> |-<br /> |BD0230<br /> |TOW ARM-COLLECTOR TROLLEY, KBH<br /> |<br /> |''† Vahle KBH Rail only''<br /> <br /> ''(gray housing color)''<br /> |1<br /> |-<br /> |5<br /> |46838015<br /> |SPACER-BLOCK-TOW ARM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |6<br /> |41237083-2<br /> |BRACKET-TOW ARM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |7<br /> |HW1054<br /> |U-BOLT-5/16-18 X 2&quot; X 5&quot;-SQUARE BEND<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW0323<br /> |BOLT-HHCS-5/16-18 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0106<br /> |WASHER-FLAT-5/16&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0150<br /> |WASHER-FLAT-5/16&quot;-FENDER<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0105<br /> |WASHER-LOCK-5/16&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0004<br /> |NUT-HEX-5/16-18<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Verify Energy Rail type (KSL OR KBH) by the color of the energy rail housing.'' <br /> |-<br /> | colspan=&quot;6&quot; |''†† Not all units equipped with Tow Arm Bracket. Location of Spacer Block and/or Tow Arm Bracket may vary from configuration shown.'' <br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Control Panel&lt;/big&gt;&lt;/u&gt;''' ===<br /> '''&lt;big&gt;''[Discontinued] Control Panel for Units with 10 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS (Discontinued) Control Panel for Units with 10HP.png|alt=BE-TS (Discontinued) Control Panel for Units with 10HP|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-CONTROL PANEL-16&quot; X 14&quot; X 6&quot;<br /> |<br /> |CONSULT FACTORY<br /> |1<br /> |-<br /> |2<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |Grip size .250&quot; to.375&quot;<br /> |1<br /> |-<br /> |6<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |Grip size .625&quot; to .750&quot;<br /> |2<br /> |-<br /> |7<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |Grip size .500&quot; to .625&quot;<br /> |2<br /> |-<br /> |8<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |''Not shown''<br /> |1<br /> |-<br /> |9<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |''Not shown''<br /> |4<br /> |}<br /> [[File:BE-TS (Discontinued) Control Panel for Units with 10HP Detail.png|alt=BE-TS (Discontinued) Control Panel for Units with 10HP Detail|frameless|556x556px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0640<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |BLANK PANEL WITHOUT HOLES<br /> |1<br /> |-<br /> |2<br /> |E0120<br /> |MAGNETIC STARTER-NEMA 1 3/4&quot;<br /> |<br /> |WITH OVERLOAD<br /> |1<br /> |-<br /> |3<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |<br /> |17<br /> |-<br /> |4<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |<br /> |17<br /> |-<br /> |5<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |17<br /> |-<br /> |6<br /> |E0207-1<br /> |TRANSFORMER<br /> |<br /> |480VAC TO 120VAC, 0.75 Kva<br /> |1<br /> |-<br /> |7<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |HW0003<br /> |NUT-NILN-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |E1023<br /> |WIREWAY<br /> |<br /> |SOLD BY LENGTH<br /> |A/R<br /> |-<br /> |11<br /> |E1024<br /> |MOUNTING TRACK<br /> |<br /> |SOLD BY LENGTH<br /> |A/R<br /> |-<br /> |12<br /> |E1020<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |16<br /> |-<br /> |13<br /> |E1040<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |E1330<br /> |END ANCHOR<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |E0341<br /> |GROUND LUG<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |E0902<br /> |FUSE-6A<br /> |<br /> |FLM-6<br /> |1<br /> |}<br /> <br /> ==== '''&lt;big&gt;''[Current] Control Panel for Units with 20 HP Power Unit''&lt;/big&gt;''' ====<br /> [[File:BE-TS (Current) Control Panel for Units with 20HP.png|alt=BE-TS (Current) Control Panel for Units with 20HP|frameless|601x601px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-24&quot; X 16&quot; X 6&quot;<br /> |<br /> |CONSULT FACTORY<br /> |1<br /> |-<br /> |2<br /> |E0123-1<br /> |HANDLE-DISCONNECT<br /> |<br /> |INCL. MOUNTING SCREWS<br /> |1<br /> |-<br /> |3<br /> |E0662<br /> |RESTRAINT-3/4&quot;-LIQUID TIGHT<br /> |<br /> |INCL. LOCKNUT<br /> |1<br /> |-<br /> |4<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |GRIP SIZE .500&quot; TO .625&quot;<br /> |2<br /> |-<br /> |5<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |GRIP SIZE .625&quot; TO .750&quot;<br /> |1<br /> |-<br /> |6<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |7<br /> |E0661<br /> |RESTRAINT-3/4&quot;-90 DEG-LIQUID TIGHT<br /> |<br /> |INCL. LOCKNUT<br /> |1<br /> |-<br /> |8<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |GRIP SIZE .250&quot; TO .375&quot;<br /> |1<br /> |-<br /> |9<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |GRIP SIZE .450&quot; TO .560&quot;<br /> |2<br /> |-<br /> |10<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |11<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |}<br /> [[File:BE-TS (Current) Control Panel for Units with 20HP Details.png|alt=BE-TS (Current) Control Panel for Units with 20HP Details|frameless|645x645px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |YE0506<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |''Blank panel without holes''<br /> |1<br /> |-<br /> |2<br /> |YE0205-1<br /> |SWITCH-DISCONNECT-80A<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43036007<br /> |SHAFT-DISCONNECT<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |YE0409<br /> |FUSE HOLDER-SINGLE POLE<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |E0914<br /> |FUSE-10A<br /> |<br /> |''FLM-10''<br /> |1<br /> |-<br /> |6<br /> |E0902<br /> |FUSE-6A<br /> |<br /> |''FLM-6''<br /> |1<br /> |-<br /> |7<br /> |E0903<br /> |FUSE-12A<br /> |<br /> |''FLM-12''<br /> |1<br /> |-<br /> |8<br /> |YE0402<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |17<br /> |-<br /> |9<br /> |YE0405<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |YE0406<br /> |END ANCHOR<br /> |<br /> |<br /> |6<br /> |-<br /> |11<br /> |E0136<br /> |FUSE HOLDER-3 POLE<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |YE0901<br /> |FUSE-40A<br /> |<br /> |JTD-40-ID<br /> |3<br /> |-<br /> |13<br /> |E1013<br /> |BASE-RELAY<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |E1012<br /> |RELAY-11 PIN<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |E0137<br /> |FUSE HOLDER-2 POLE<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |YE0902<br /> |FUSE-10A<br /> |<br /> |''KLDR-10''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |17<br /> |N/A<br /> |CONTACTOR, &quot;A40&quot; SERIES<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |E0132-1<br /> |CONTACTOR, &quot;AF38&quot; SERIES<br /> |80332009<br /> |<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |18<br /> |N/A<br /> |OVERLOAD, &quot;TA&quot; SERIES<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |E0131-1<br /> |OVERLOAD, &quot;TF&quot; SERIES<br /> |80332009<br /> |<br /> |1<br /> |-<br /> |19<br /> |E1023<br /> |WIREWAY<br /> |<br /> |''Sold by length''<br /> |A/R<br /> |-<br /> |20<br /> |E0908<br /> |MOUNTING RAIL<br /> |<br /> |''Sold by length''<br /> |A/R<br /> |-<br /> |21<br /> |E1070<br /> |GROUND BAR-4 POSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |22<br /> |E1071<br /> |GROUND BAR-7 POSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |23<br /> |HW1061<br /> |SCREW-RHMS-#8-32 X 1&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |24<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> | rowspan=&quot;3&quot; |''Track and Wireway mounting hardware (Not shown)''<br /> |14<br /> |-<br /> |25<br /> |HW0133<br /> |WASHER-FLAT-#8<br /> |<br /> |14<br /> |-<br /> |26<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |17<br /> |-<br /> |27<br /> |E0139<br /> |AUXILIARY CONTACT BLOCK<br /> |80332009<br /> |''†† See notes''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† &quot;A40&quot; Series Contactor and &quot;TA&quot; Series Overload no longer available as of mid-March 2022. Components must be replaced with current Overload &amp; Relay Kit 80332009.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Auxiliary contact Block required for units equipped with &quot;AF38&quot; Series Contactor &amp; &quot;TF&quot; Series Overload.''<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Transformer&lt;/big&gt;&lt;/u&gt;''' ===<br /> '''&lt;big&gt;''Transformer for Units with 20 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS Transformer for Units with 20HP.png|alt=BE-TS Transformer for Units with 20HP|frameless|554x554px]]<br /> <br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0220<br /> |TRANSFORMER<br /> |<br /> |''480VAC to 120VAC, 3kVA''<br /> |1<br /> |-<br /> |2<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |3<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |7<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |3<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;Operator Console&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Operator Console Electrical.png|alt=BE-TS Operator Console Electrical|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0327<br /> |KEYED ACTUATOR ASSEMBLY<br /> |<br /> |''Includes 2 Keys &amp; Contact Block'' <br /> |1<br /> |-<br /> |2<br /> |E0351<br /> |KEY-REPLACEMENT<br /> |<br /> |''Set of 2 Keys''<br /> |A/R<br /> |-<br /> |3<br /> |E0309-1<br /> |HOUR METER<br /> |<br /> |''† Includes mounting hardware''<br /> |1<br /> |-<br /> |4<br /> |N/A<br /> |SWITCH-SELECTOR-3 POSITION<br /> |<br /> |''ON-OFF-ON, †† See notes''<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |5<br /> |N/A<br /> |LEGEND PLATE-VACUUM<br /> |<br /> |''††† See notes''<br /> |1<br /> |-<br /> |N/A<br /> |LEGEND PLATE-MAGNET<br /> |<br /> |''††† See notes''<br /> |1<br /> |-<br /> |6<br /> |N/A<br /> |CONTACT BLOCK-N/O<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |7<br /> |N/A<br /> |CONTACT BLOCK-N/C<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |8<br /> |E1083<br /> |SWITCH-SELECTOR-3 POSITION<br /> |80232001<br /> |''OFF-ON-OFF''<br /> |1<br /> |-<br /> |9<br /> |E1080<br /> |CONTACT BLOCK-N/O &amp; N/C<br /> |80232001<br /> |<br /> |2<br /> |-<br /> |10<br /> |YE0311<br /> |SWITCH-EMERGENCY STOP<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |YE0407<br /> |LEGEND PLATE-EMERGENCY STOP<br /> |<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Current Hour Meter is 3-Bolt version. Replacement of 4-Bolt version will require new mounting holes to be drilled in dashboard.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Parts no longer available. Must order new Selector Switch Kit 80232001''<br /> |-<br /> | colspan=&quot;6&quot; |''††† Parts no longer available. See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Labels_&amp;_Placards Labels &amp; Placards] section for current Placards''<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;Foot Switch&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Foot Switch Electrical.png|alt=BE-TS Foot Switch Electrical|frameless|701x701px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0301-1<br /> |SWITCH-FOOT OPERATED<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .500&quot; to .625&quot;''<br /> |1<br /> |-<br /> |3<br /> |E0515<br /> |CORD-14-3-SO/SOW<br /> |<br /> |<br /> |9'<br /> |-<br /> |4<br /> |HC0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |''If equipped''<br /> |2<br /> |-<br /> |5<br /> |HC0103<br /> |WASHER-1/4&quot;-LOCK<br /> |<br /> |''If equipped''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Open-Style Switch is a direct replacement for discontinued, Covered-Style Switch.'' <br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''Gate Switch'''&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Gate Switch Electrical.png|alt=BE-TS Gate Switch Electrical|frameless|613x613px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0312<br /> |SWITCH-PUSH BUTTON<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43017041<br /> |MOUNT-GATE SWITCH<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW1077<br /> |SCREW-RHMS-#10-24 X 5/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0307<br /> |BOLT-SHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |PL0502<br /> |GROMMET-3/8&quot; I.D.<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |YE0305<br /> |SWITCH-ROLLER<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |SS0303<br /> |WASHER-FLAT-#8<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |SS0111<br /> |SCREW-SHCS-#8-32 X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |SS0203<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''Proximity Switch'''&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Proximity Switch Electrical.png|alt=BE-TS Proximity Switch Electrical|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0314<br /> |SENSOR-PROXIMITY-30MM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43017027-2<br /> |BRACKET-PROXIMITY SENSOR<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |6<br /> |43017037-2<br /> |ANGLE-PROXIMITY SENSOR TARGET<br /> |<br /> |''Rotary Actuator units'' <br /> |1<br /> |-<br /> |43017084-2<br /> |ANGLE-PROXIMITY SENSOR TARGET<br /> |<br /> |''Helical Actuator units'' <br /> |1<br /> |-<br /> |7<br /> |HW0341<br /> |BOLT-FHSCS-1/4-20 X 5/8&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''120V Receptacle'''&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS 120V-Receptacle.png|alt=BE-TS 120V Receptacle|frameless|544x544px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |3<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0650<br /> |RECEPTACLE-DUPLEX<br /> |<br /> |''† 20A''<br /> |1<br /> |-<br /> |5<br /> |E0651<br /> |COVER-RECEPTACLE-DUPLEX<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0655<br /> |RECEPTACLE-GFCI<br /> |<br /> |''20A''<br /> |1<br /> |-<br /> |7<br /> |E0656<br /> |COVER-RECEPTACLE-GFCI<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |E0654<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |E0657<br /> |COVER-RECEPTACLE-DUPLEX/GFCI<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |''Mounting hardware (Not shown)''<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† If Duplex Receptacle has Split Feed (1 set of black &amp; white wires for each plug), the Break-Off Fin must be removed prior to installation.'' <br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''Console Enclosure'''&lt;/big&gt;&lt;/u&gt; ===<br /> <br /> ==== '''&lt;big&gt;''[Discontinued] Operator Console Enclosure for Units with 10 HP Power Unit''&lt;/big&gt;''' ====<br /> [[File:BE-TS (Discontinued) Operator Console Enclosure for Units with 10 HP Power Unit.png|alt=BE-TS (Discontinued) Operator Console Enclosure for Units with 10 HP Power Unit|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-6&quot; X 6&quot; X 4 &quot;<br /> |<br /> |''Consult factory''<br /> |1<br /> |-<br /> |2<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |3<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |4<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |5<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |8<br /> |43817087-2<br /> |BRACKET-MOUNTING-ENCLOSURE<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> | rowspan=&quot;4&quot; |''Mounting bracket hardware (Not shown)''<br /> |2<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |2<br /> |}<br /> '''&lt;big&gt;''[Discontinued] Operator Console Enclosure Panel for Units with 10 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS (Discontinued) Operator Console Enclosure Panel for Units with 10 HP Power Unit.png|alt=BE-TS (Discontinued) Operator Console Enclosure Panel for Units with 10 HP Power Unit|frameless|566x566px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0639<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |''Without holes''<br /> |1<br /> |-<br /> |2<br /> |E1024<br /> |TRACK-TERMINAL BLOCK<br /> |<br /> |''4 7/8&quot; LG''<br /> |1<br /> |-<br /> |3<br /> |E1020<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |9<br /> |-<br /> |4<br /> |E1330<br /> |END ANCHOR<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |E1040<br /> |END BARRIER<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0341<br /> |GROUND LUG<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |''2 for track mounting''<br /> |3<br /> |-<br /> |8<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |''2 for track mounting''<br /> |3<br /> |-<br /> |9<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |''2 for track mounting''<br /> |3<br /> |}<br /> '''&lt;big&gt;''[Current] Operator Console Enclosure for Units with 20 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS (Current) Operator Console Enclosure for Units with 20 HP Power Unit.png|alt=BE-TS (Current) Operator Console Enclosure for Units with 20 HP Power Unit|frameless|549x549px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-8&quot; X 8&quot; X 4&quot;<br /> |<br /> |''Consult factory''<br /> |1<br /> |-<br /> |2<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |3<br /> |-<br /> |3<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .625&quot; to .750&quot;''<br /> |1<br /> |-<br /> |4<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''† Grip size .450&quot; to .560&quot;''<br /> |4<br /> |-<br /> |5<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''†'' ''Grip size .250&quot; to .375&quot;''<br /> |4<br /> |-<br /> |6<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |11<br /> |-<br /> |7<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |E1349<br /> |SEAL-KNOCKOUT-1/2&quot;<br /> |<br /> |''† See notes''<br /> |A/R<br /> |-<br /> |9<br /> |43037003-2<br /> |BRACKET-MOUNTING-ENCLOSURE<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> | rowspan=&quot;4&quot; |''Mounting bracket hardware (Not shown)''<br /> |2<br /> |-<br /> |12<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |2<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Restraints sold for machines equipped with all available options. Machines built without certain options will have Knockout Seals (Item #8) installed in place of restraints.''<br /> |}<br /> '''&lt;big&gt;''[Current] Operator Console Enclosure Panel for Units with 20 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS (Current) Operator Console Enclosure Panel for Units with 20 HP Power Unit.png|alt=BE-TS (Current) Operator Console Enclosure Panel for Units with 20 HP Power Unit|frameless|527x527px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0135<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |''Blank panel without holes''<br /> |1<br /> |-<br /> |2<br /> |E0908<br /> |MOUNTING RAIL<br /> |<br /> |''Sold by length''<br /> |A/R<br /> |-<br /> |3<br /> |YE0402<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |14<br /> |-<br /> |4<br /> |YE0405<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |YE0406<br /> |END ANCHOR<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |E1074<br /> |JUMPER-2 POLE<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |E0130<br /> |GROUND BAR-7 POSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW1061<br /> |SCREW-RHMS-#8-32 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> | rowspan=&quot;3&quot; |''Track and Wireway mounting hardware (Not shown)''<br /> |2<br /> |-<br /> |10<br /> |HW0133<br /> |WASHER-FLAT-#8<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |4<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''Junction Box'''&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Junction Box.png|alt=BE-TS Junction Box|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |2<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |3<br /> |-<br /> |3<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .500&quot; to .625&quot;''<br /> |4<br /> |-<br /> |4<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .625&quot; to .750&quot;''<br /> |2<br /> |-<br /> |5<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Top Module Junction Box&lt;/big&gt;''''' ====<br /> [[File:BE-TS Top Module Junction Box.png|alt=BE-TS Top Module Junction Box|frameless|532x532px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1329<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0662<br /> |RESTRAINT-3/4&quot;-LIQUID TIGHT<br /> |<br /> |''Includes Locknut'' <br /> |1<br /> |-<br /> |3<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .625&quot; to .750&quot;''<br /> |1<br /> |-<br /> |4<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Wiring Diagrams&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;BE-TS with 10 HP Motor Wiring Diagram&lt;/big&gt;''''' ====<br /> [[File:BE-TS Wiring Diagram-10HP Motor.png|alt=BE-TS Wiring Diagram-10HP Motor|frameless|800x800px]]<br /> <br /> ==== '''''&lt;big&gt;BE-TS with Magnet and 10 HP Motor Wiring Diagram&lt;/big&gt;''''' ====<br /> [[File:BE-TS with Magnet and 10HP Motor Wiring Diagram.png|alt=BE-TS with Magnet and 10HP Motor Wiring Diagram|frameless|800x800px]]<br /> <br /> ==== '''''&lt;big&gt;BE-TS with Magnet and 20 HP Motor Wiring Diagram&lt;/big&gt;''''' ====<br /> [[File:BE-TS Magnet Wiring Diagram-20HP Motor.png|alt=BE-TS Magnet Wiring Diagram-20HP Motor|frameless|800x800px]]<br /> <br /> [[File:BE-TS Magnet Wiring Diagram-20HP Motor-02.png|alt=BE-TS Magnet Wiring Diagram-20HP Motor-02|frameless|800x800px]]<br /> <br /> [[File:BE-TS Magnet Wiring Diagram-20HP Motor-03.png|alt=BE-TS Magnet Wiring Diagram-20HP Motor-03|frameless|800x800px]]<br /> <br /> [[File:BE-TS Magnet Wiring Diagram-20HP Motor-04.png|alt=BE-TS Magnet Wiring Diagram-20HP Motor-04|frameless|800x800px]]<br /> <br /> == &lt;big&gt;Hydraulics&lt;/big&gt; ==<br /> <br /> === '''&lt;big&gt;&lt;u&gt;[Discontinued] 10 HP Power Unit&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:(Discontinued) BE-TS Power Unit (10HP).png|alt=(Discontinued) BE-TS Power Unit (10HP)|frameless|553x553px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0011<br /> |MOTOR-ELECTRIC-10HP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0326<br /> |ADAPTER-PUMP TO MOTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0325<br /> |PUMP-VANE-16 GPM<br /> |<br /> |''Variable displacement''<br /> |1<br /> |-<br /> |4<br /> |HC0327<br /> |COUPLING BODY-1 3/8&quot;<br /> |<br /> |''Motor end''<br /> |1<br /> |-<br /> |5<br /> |HC0329<br /> |SPIDER-COUPLING INSERT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HC0328<br /> |COUPLING BODY-7/8&quot;<br /> |<br /> |''Pump end''<br /> |1<br /> |-<br /> |7<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1 1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H1549<br /> |ADAPTER-#20 JICM X #24 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |H1595<br /> |ADAPTER-90 DEG-#20 JICM X #20 JICSW<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |H1609<br /> |ADAPTER-90 DEG-#12 JICM X #16 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |H1522<br /> |ADAPTER-#12 JICSW X #12 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |HC0260<br /> |VALVE-MAIN SYSTEM RELIEF<br /> |<br /> |<br /> |1<br /> |-<br /> |15a<br /> |43846003<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''†† For Item 15 (Not shown)''<br /> |A/R<br /> |-<br /> |16<br /> |HC0318<br /> |GAUGE-PRESSURE<br /> |<br /> |<br /> |1<br /> |-<br /> |17<br /> |H0206<br /> |PLUG-#4 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |H1108<br /> |ADAPTER-#10 JICM X #12 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |H1522<br /> |ADAPTER-#12 JICSW X #12 SAEM<br /> |<br /> |''† See note''<br /> |1<br /> |-<br /> |20<br /> |H1542<br /> |ADAPTER-#12 JICM X #12 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |21<br /> |HC0280<br /> |VALVE-CHECK<br /> |<br /> |''† See note''<br /> |1<br /> |-<br /> |22<br /> |H1542<br /> |ADAPTER-#12 JICM X #12 SAEM<br /> |<br /> |''† See note''<br /> |1<br /> |-<br /> |23<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .500&quot; to .625&quot;''<br /> |1<br /> |-<br /> |23a<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |''For Item 23 (Not shown)''<br /> |1<br /> |-<br /> |24<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |25<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |26<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |27<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Parts noted used on units built after April 2001.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Cartridges are for replacement only.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;[Discontinued] 30 Gallon Reservoir&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:(Discontinued) BE-TS 30 Gallon Reservoir.png|alt=(Discontinued) BE-TS 30 Gallon Reservoir|frameless|542x542px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43842001<br /> |RESERVOIR-VERTICAL-30 GAL<br /> |<br /> |''Includes Items 1 through 8''<br /> |1<br /> |-<br /> |1<br /> |HC0542<br /> |GASKET-CHANNEL<br /> |<br /> |''Sold by length''<br /> |7'<br /> |-<br /> |2<br /> |HC0340<br /> |GAUGE-SIGHT<br /> |<br /> |''with Thermometer''<br /> |1<br /> |-<br /> |3<br /> |HC0306<br /> |STRAINER-SUCTION<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HC0308<br /> |FILLER/BREATHER ASSEMBLY<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0209<br /> |SCREW-RHMS-10-32 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |BI0110<br /> |ELBOW-STR-90 DEG-#16 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |8<br /> |H0208<br /> |PLUG-#12 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1590<br /> |ADAPTER-90 DEG-#16 JICM X #16 FNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |BI0102<br /> |ELBOW-#12 FNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |BI0020<br /> |NIPPLE-#12 NPT X 3&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |BI0301<br /> |TEE-#12 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |H1502<br /> |ADAPTER-#8 JICM X #12 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |BI0002<br /> |NIPPLE-CLOSE-#12 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HC0307<br /> |RETURN LINE FILTER ASSEMBLY<br /> |<br /> |''Housing and Filter''<br /> |1<br /> |-<br /> |16<br /> |HC0317<br /> |FILTER-RETURN LINE<br /> |<br /> |''Replacement filter''<br /> |1<br /> |-<br /> |17<br /> |H1509<br /> |ADAPTER-#10 JICM X #12 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> | rowspan=&quot;4&quot; |''Mounting hardware''<br /> <br /> ''(Not shown)''<br /> |4<br /> |-<br /> |19<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |8<br /> |-<br /> |20<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |4<br /> |-<br /> |21<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;[Current] Power Unit (20 HP)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:(Current) BE-TS 30 Power Unit (20 HP).png|alt=(Current) BE-TS 30 Power Unit (20 HP)|frameless|531x531px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0040<br /> |MOTOR-ELECTRIC-20 HP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0357<br /> |ADAPTER-PUMP TO MOTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0356<br /> |PUMP-PISTON-71CC<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HC0358-M<br /> |COUPLING BODY-M300-1 5/8&quot; BORE<br /> |<br /> |''MOTOR SIDE''<br /> |1<br /> |-<br /> |5<br /> |HC0358-I<br /> |SPIDER-COUPLING INSERT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HC0358-P<br /> |COUPLING BODY-M300-1 1/4&quot; BORE<br /> |<br /> |''PUMP SIDE''<br /> |1<br /> |-<br /> |7<br /> |HW0602<br /> |BOLT-HHCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0113<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |H1604<br /> |ADAPTER-90 DEG-#12 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HC0363<br /> |ADAPTER-FLANGE-#32 NPT<br /> |<br /> |''Includes O-ring''<br /> |1<br /> |-<br /> |11<br /> |HC0240<br /> |BLOCK-CHECK VALVE<br /> |<br /> |''Includes Cartridge &amp; O-ring''<br /> |1<br /> |-<br /> |12<br /> |N/A<br /> |CARTRIDGE-CHECK VALVE<br /> |<br /> |''† Replacement cartridge''<br /> |A/R<br /> |-<br /> |13<br /> |H0300<br /> |ELBOW-STR-90 DEG-#4 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |HC0318<br /> |GAUGE-PRESSURE<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |HE0704<br /> |ADAPTER-SPLIT FLANGE-1&quot;<br /> |<br /> |''2-Piece adapter with O-ring''<br /> |1<br /> |-<br /> |16<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |H0211<br /> |ADAPTER-#24 NPT X #12<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |E0661<br /> |RESTRAINT-3/4&quot;-90 DEG-LIQUID TIGHT<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |HW0513<br /> |BOLT-HHCS-1/2-13 X 2 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |20<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |21<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTE<br /> |-<br /> | colspan=&quot;6&quot; |''† Consult factory''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;[Current] 45 Gallon Reservoir&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:(Current) BE-TS 45 Gallon Reservoir.png|alt=(Current) BE-TS 45 Gallon Reservoir|frameless|547x547px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43842010<br /> |45 GAL RESERVOIR ASSEMBLY<br /> |<br /> |''Includes Items 1 through 7''<br /> |A/R<br /> |-<br /> |1<br /> |43848005<br /> |PLATE-COVER<br /> |<br /> |''† See note''<br /> |1<br /> |-<br /> |2<br /> |HC0308<br /> |FILLER/BREATHER ASSEMBLY<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0209<br /> |SCREW-RHMS-10-32 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |4<br /> |HC0340<br /> |GAUGE-SIGHT<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H0208<br /> |PLUG-#12 NPT<br /> |<br /> |''Non-IIoT equipped units only''<br /> |1<br /> |-<br /> |6<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |7<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |8<br /> |HC0361<br /> |HOUSING-FILTER<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HC0354<br /> |CARTRIDGE-FILTER<br /> |<br /> |''10 Micron filtration''<br /> |1<br /> |-<br /> |10<br /> |HC0362<br /> |FLANGE-SUCTION TUBE<br /> |<br /> |''Includes hardware''<br /> |1<br /> |-<br /> |11<br /> |43848008<br /> |TUBE-SUCTION<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |H1569<br /> |ADAPTER-45 DEG-#12 JICM X #12 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |H0202<br /> |REDUCER-#24 SAE X #12 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |H1622<br /> |ADAPTER-90 DEG-#12 SAEM X #12 JICM<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |H1644<br /> |PLUG-#24 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |H1610<br /> |ADAPTER-45 DEG-#12 JICSW X #12 JICM<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |PB0311-1<br /> |NIPPLE-#12 NPT X 2&quot;-BRASS<br /> |<br /> | rowspan=&quot;3&quot; |''†† See notes''<br /> |1<br /> |-<br /> |20<br /> |BI0301<br /> |TEE-#12 FNPT<br /> |<br /> |1<br /> |-<br /> |21<br /> |H1502<br /> |ADAPTER-#8 JICM X #12 MNPT<br /> |<br /> |2<br /> |-<br /> |22<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> | rowspan=&quot;5&quot; |''Reservoir mounting hardware'' <br /> <br /> ''(Not shown)''<br /> |2<br /> |-<br /> |23<br /> |HW0405<br /> |BOLT-HHCS-3/8-16 X 2&quot;<br /> |<br /> |2<br /> |-<br /> |24<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |8<br /> |-<br /> |25<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |4<br /> |-<br /> |26<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† RVT silicone required to seal cover plate after removal.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Components required for units equipped with radial piston drive wheel motors plumbed with case drain hoses. See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Drive_Wheel_Assembly Drive Wheel Assembly] section.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Valve Assembly&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Lift Valve and Manifold Detail&lt;/big&gt;''''' ====<br /> [[File:BE-TS Lift Valve and Manifold.png|alt=BE-TS Lift Valve and Manifold|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |80342001<br /> |LEVER VALVE RETRO KIT<br /> |<br /> |''† Required prior to 2006'' <br /> |A/R<br /> |-<br /> |1<br /> |HC0257<br /> |VALVE-LEVER<br /> |<br /> |''Effective from 2006 to Present''<br /> |1<br /> |-<br /> |2<br /> |HC0252<br /> |MANIFOLD-D05-1 BANK<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0318<br /> |BOLT-SHCS-1/4-20 X 1 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |H1642<br /> |PLUG-#12 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H1542<br /> |ADAPTER-#12 JICM X #12 SAEM<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HC0248<br /> |FIXED FLOW REGULATOR<br /> |<br /> |''††14 GPM''<br /> |1<br /> |-<br /> |12<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |13<br /> |H1540<br /> |ADAPTER-#8 JICM X #8 SAEM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |14<br /> |43817085<br /> |PLATE-ADAPTER-VALVE<br /> |<br /> |''† Not shown''<br /> |1<br /> |-<br /> |15<br /> |SS0104<br /> |BOLT-SHCS-1/4-20 X 5/8&quot;-SST<br /> |<br /> |''† Not shown''<br /> |4<br /> |-<br /> |16<br /> |SS0300<br /> |WASHER-FLAT-1/4&quot;-SAE-SST<br /> |<br /> |''† Not shown''<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |<br /> |-<br /> | colspan=&quot;6&quot; |''† Kit includes Items 1 &amp; 14 through 16. Minor modifications to the dash board required.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† For units shipped April 2017 to present''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Floor Drive / Arm Rotation Valve and Manifold Detail&lt;/big&gt;''''' ====<br /> [[File:BE-TS Floor Drive-Arm Rotation Valve and Manifold.png|alt=BE-TS Floor Drive-Arm Rotation Valve and Manifold|frameless|570x570px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0233<br /> |VALVE-LEVER<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HC0251<br /> |MANIFOLD-D03-2 BANK<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1545<br /> |ADAPTER-#10 JICM X #10 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |H1600<br /> |ADAPTER-90 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |H1587<br /> |ADAPTER-#6 JICSW X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HC0211<br /> |VALVE-ADJUSTABLE FLOW CONTROL<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |H1504<br /> |ADAPTER-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |H1640<br /> |PLUG-#6 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |43817033-2<br /> |RISER PLATE<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |14<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |HC0233-SK<br /> |SEAL KIT<br /> |<br /> |''For Item 1 (Not shown)''<br /> |A/R<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Valve Assembly&lt;/big&gt;''''' ====<br /> [[File:BE-TS Valve Assembly.png|alt=BE-TS Valve Assembly|frameless|538x538px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0233<br /> |VALVE-LEVER<br /> |<br /> |<br /> |3<br /> |-<br /> |2<br /> |HC0250<br /> |MANIFOLD-D03-3 BANK<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1610<br /> |ADAPTER-90 DEG-#10 JICM X #10 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |H1641<br /> |PLUG-#10 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H1000<br /> |ADAPTER-#8 SAEM X #4 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |H0001<br /> |NIPPLE-#4 NPT<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HC0247<br /> |FIXED FLOW REGULATOR-2.25 GPM<br /> |<br /> |''† See notes''<br /> |4<br /> |-<br /> |8<br /> |H1504<br /> |ADAPTER-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |H1640<br /> |PLUG-#6 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |H1540<br /> |ADAPTER-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |43817034-2<br /> |RISER PLATE<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |14<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |15<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HC0233-SK<br /> |SEAL KIT<br /> |<br /> |''For Item 1 (Not shown)''<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Units built prior to January 2107 equipped with Adjustable Flow Controls. Fixed Flow Regulators are direct replacement for Adjustable Flow Controls.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Lift Cylinder&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Lift Cylinder.png|alt=BE-TS Lift Cylinder|frameless|582x582px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43822006<br /> |CLEVIS ASSEMBLY<br /> |<br /> |''Sold as assembly only''<br /> |4<br /> |-<br /> |2<br /> |HW0813<br /> |SCREW-SHSS-3/8-16 X 1/2&quot;<br /> |<br /> |''Nylon tipped''<br /> |8<br /> |-<br /> |3<br /> |HC0420<br /> |CYLINDER-LIFT<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |H1645<br /> |ADAPTER-90 DEG-#8 SAEM X #6 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |H0212<br /> |ADAPTER-#6 NPT X #8 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HC0425<br /> |VELOCITY FUSE<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Lift Circuit&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Lift Circuit.png|alt=BE-TS Lift Circuit|frameless|553x553px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43017014-2<br /> |SUPPORT-PILOT DOWN MANIFOLD<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43718008<br /> |STANDOFF<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0315<br /> |BOLT-HHCS-1/4-20 X 4 1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |10<br /> |-<br /> |7<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |5<br /> |-<br /> |8<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |5<br /> |}<br /> <br /> ==== '''''&lt;big&gt;[Discontinued] Lift Circuit Configuration&lt;/big&gt;''''' ====<br /> [[File:(Discontinued) BE-TS Lift Circuit Configuration.png|alt=(Discontinued) BE-TS Lift Circuit Configuration|frameless|507x507px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |H1507<br /> |ADAPTER-#8 JICM X #8 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0264<br /> |VALVE-CHECK-PILOT TO OPEN<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H1621<br /> |ADAPTER-#4 SAEM X #2 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HC0269<br /> |VALVE-ADJUSTABLE FLOW CONTROL<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |H1591<br /> |ADAPTER-90 DEG-#6 JICM X #2 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |H1587<br /> |ADAPTER-#6 JICSW X #4 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1501<br /> |ADAPTER-#8 JICM X #6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43047002<br /> |MANIFOLD-PILOT DOWN<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> ==== '''''&lt;big&gt;[Current] Lift Circuit Configuration&lt;/big&gt;''''' ====<br /> [[File:(Current) BE-TS Lift Circuit Configuration.png|alt=(Current) BE-TS Lift Circuit Configuration|frameless|534x534px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0215<br /> |VALVE-CHECK-CARTRIDGE<br /> |<br /> |<br /> |8<br /> |-<br /> |2<br /> |H1560<br /> |ADAPTER-45 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |H1670<br /> |ADAPTER-45 DEG-#12 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |H1612<br /> |ADAPTER-90 DEG-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HC0283<br /> |VALVE-COUNTER BALANCE<br /> |<br /> |''Includes cartridge''<br /> |1<br /> |-<br /> |6<br /> |43846004<br /> |CARTRIDGE-COUNTER BALANCE<br /> |<br /> |''Replacement cartridge''<br /> |A/R<br /> |-<br /> |7<br /> |H1552<br /> |ADAPTER-#6 JICM X #6 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |H1587<br /> |ADAPTER-#6 JICSW X #4 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1501<br /> |ADAPTER-#8 JICM X #6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43047002<br /> |MANIFOLD-PILOT DOWN<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Cartridges are for replacement only''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Down-Speed Flow Control&lt;/big&gt;''''' ====<br /> [[File:BE-TS Down-Speed Flow Control.png|alt=BE-TS Down-Speed Flow Control|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0270<br /> |VALVE-ADJUSTABLE FLOW CONTROL<br /> |<br /> |''Pressure compensated''<br /> |1<br /> |-<br /> |2<br /> |H0007<br /> |NIPPLE-#8 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1647<br /> |ADAPTER-90 DEG-#10 SAEM X #8 FNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |H1680<br /> |ADAPTER-#10 JICM X #8 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H1690<br /> |ADAPTER-#10 JICSW X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HC0248<br /> |FIXED FLOW REGULATOR<br /> |<br /> |''14 GPM''<br /> |1<br /> |-<br /> |7<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |H1612<br /> |ADAPTER-90 DEG-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1547<br /> |ADAPTER-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Cross Port Relief&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Mounting Configuration&lt;/big&gt;''''' ====<br /> [[File:BE-TS Cross Port Relief Mounting Configuration.png|alt=BE-TS Cross Port Relief Mounting Configuration|frameless|546x546px]]<br /> {| class=&quot;wikitable&quot;<br /> ! colspan=&quot;6&quot; |UNITS BUILT PRIOR TO SEPTEMBER, 2014<br /> |-<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> ! colspan=&quot;6&quot; |UNITS BUILT SEPTEMBER, 2014 TO DECEMBER, 2014<br /> |-<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW0305<br /> |BOLT-HHCS-1/4-20 X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |7<br /> |43058004<br /> |PLATE-SPACER<br /> |<br /> |<br /> |1<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> ! colspan=&quot;6&quot; |UNITS BUILT DECEMBER, 2014 TO PRESENT<br /> |-<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |2<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |}<br /> ''NOTE: Effectivity dates refer to dates new extractor units shipped from the factory. Replacement part effectivity may differ due to factory inventory levels at time of parts order. Consult factory if unsure of parts needed.''<br /> <br /> ==== '''''&lt;big&gt;Components&lt;/big&gt;''''' ====<br /> [[File:BE-TS Cross Port Relief Components.png|alt=BE-TS Cross Port Relief Components|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0262<br /> |VALVE-CROSS PORT RELIEF<br /> |<br /> |''Includes cartridges''<br /> |1<br /> |-<br /> |2<br /> |43046002<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''For Item 1''<br /> |A/R<br /> |-<br /> |3<br /> |H1540<br /> |ADAPTER-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |H1507<br /> |ADAPTER-#8 JICM X #8 MNPT<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |HC0239<br /> |VALVE-ADJUSTABLE FLOW CONTROL<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |H1568<br /> |ADAPTER-45 DEG-#8 JICM X #8 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |H1646<br /> |ADAPTER-90 DEG-#8 SAEM X #6 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |H0805<br /> |TEE-#6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HC0273<br /> |REGULATOR-FIXED FLOW<br /> |<br /> |''7.0 GPM''<br /> |4<br /> |-<br /> |11<br /> |H1501<br /> |ADAPTER-#8 JICM X #6 MNPT<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Floor Drive Cutout&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Floor Drive Cutout.png|alt=BE-TS Floor Drive Cutout|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |SOLENOID-DRIVE CUTOUT<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |7<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |BI0001<br /> |NIPPLE-CLOSE-#8 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |N/A<br /> |SOLENOID-DRIVE CUTOUT<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |10<br /> |YE0501<br /> |CONNECTOR-SOLENOID<br /> |<br /> |''DIN 43650''<br /> |1<br /> |-<br /> |11<br /> |43058004<br /> |PLATE-SPACER<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |HC0278-TS/QS<br /> |SOLENOID-DRIVE CUTOUT<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |H1547<br /> |ADAPTER-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |H1612<br /> |ADAPTER-90 DEG-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Part obsolete. Must be replaced with Retro Kit Part # 80242007.''<br /> |-<br /> | colspan=&quot;6&quot; |''NOTE: Effectivity dates refer to dates new extractor units shipped from the factory. Replacement part effectivity may differ due to factory inventory levels at time of parts order. Consult factory if unsure of parts needed.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Counter Balance Valve&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Counter Balance Valve.png|alt=BE-TS Counter Balance Valve|frameless|554x554px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0263<br /> |VALVE-COUNTER BALANCE<br /> |<br /> |<br /> |1<br /> |-<br /> |1a<br /> |43046004<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''† For Item 1 (Not shown)''<br /> |A/R<br /> |-<br /> |2<br /> |H1615<br /> |ADAPTER-90 DEG-#6 JICM X #6 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |H1552<br /> |ADAPTER-#6 JICM X #6 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0305<br /> |BOLT-HHCS-1/4-20 X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Cartridges are for replacement only''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Transition Plate&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Transition Plate.png|alt=BE-TS Transition Plate|frameless|576x576px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817067-2<br /> |PLATE-TRANSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |H0020<br /> |UNION-BULKHEAD-45 DEG-#6 JICM<br /> |<br /> |<br /> |8<br /> |-<br /> |3<br /> |H0021<br /> |NUT-BULKHEAD-#6 JIC<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Return Line Manifold&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Return Line Manifold.png|alt=BE-TS Return Line Manifold|frameless|555x555px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43847001<br /> |MANIFOLD-RETURN LINE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |H1501<br /> |ADAPTER-#8 JICM X #6 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1503<br /> |ADAPTER-#12 JICM X #12 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |43817069-2<br /> |BRACKET-BULKHEAD<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |H0015<br /> |UNION-BULKHEAD-90 DEG-#12 JICM<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H0016<br /> |NUT-BULKHEAD-#12 JIC<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;EQ Chain Hose Guard&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS EQ Chain Hose Guard.png|alt=BE-TS EQ Chain Hose Guard|frameless|577x577px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43017074-2<br /> |GUARD-HOSE-EQ CHAIN<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Used on units manufactured after May 2015.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Hydraulic Schematics&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Hydraulic Schematic.png|alt=BE-TS Hydraulic Schematic|frameless|1180x1180px]]<br /> <br /> ==== '''''&lt;big&gt;Extended Reach Hydraulic Schematics&lt;/big&gt;''''' ====<br /> [[File:BE-TS Hydraulic Schematic Extended Reach.png|alt=BE-TS Hydraulic Schematic Extended Reach|frameless|905x905px]]<br /> <br /> == &lt;big&gt;Standard Available Options&lt;/big&gt; ==<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Strobe &amp; Alarm&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''&lt;big&gt;''[Discontinued] Strobe Light &amp; Stanchion Configuration''&lt;/big&gt;''' ====<br /> [[File:(Discontinued) BE-TS Strobe Light.png|alt=(Discontinued) BE-TS Strobe Light|frameless|722x722px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0317<br /> |STROBE LIGHT<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41215014<br /> |STANCHION<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0401<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |E1010<br /> |RECEPTACLE-TWIST LOCK<br /> |<br /> |''(Not shown)''<br /> |1<br /> |-<br /> |7<br /> |E1011<br /> |PLUG-TWIST LOCK<br /> |<br /> |''(Not shown)''<br /> |1<br /> |}<br /> <br /> ==== '''&lt;big&gt;''[Discontinued] Audible Alarm Configuration''&lt;/big&gt;''' ====<br /> [[File:(Discontinued) BE-TS Audible Alarm.png|alt=(Discontinued) BE-TS Audible Alarm|frameless|490x490px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0317-A<br /> |AUDIBLE ALARM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0654<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |00117101-2<br /> |MOUNTING BRACKET<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |5<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> ==== '''&lt;big&gt;''[Current] Stack Light Strobe &amp; Alarm Configuration''&lt;/big&gt;''' ====<br /> [[File:(Current) BE-TS Stack Light Strobe and Alarm Configuration.png|alt=(Current) BE-TS Stack Light Strobe and Alarm Configuration|frameless|844x844px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0362<br /> |MOUNTING BASE<br /> |<br /> |''Includes restraints''<br /> |1<br /> |-<br /> |2<br /> |E0365<br /> |TERMINAL BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0363<br /> |STROBE LIGHT-AMBER-120VAC<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |4<br /> |E0364<br /> |AUDIBLE ALARM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |5<br /> |SS0118<br /> |SCREW-SHCS-#8-32 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |SS0303<br /> |WASHER-FLAT-#8<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |SS0203<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |E1010<br /> |RECEPTACLE-TWIST LOCK<br /> |<br /> |''(Not shown)''<br /> |1<br /> |-<br /> |9<br /> |E1011<br /> |PLUG-TWIST LOCK<br /> |<br /> |''(Not shown)''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† For units not equipped with the audible alarm option, a cap (not shown) mounts on top of the strobe light in place of the audible alarm. Cap included with base.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† For units not equipped with the strobe light option, the audible alarm mounts directly to the terminal base in place of the strobe light.'' <br /> |}<br /> <br /> ==== '''&lt;big&gt;''Strobe &amp; Alarm Mounting''&lt;/big&gt;''' ====<br /> [[File:BE-TS Strobe and Alarm Mounting.png|alt=BE-TS Strobe and Alarm Mounting|frameless|516x516px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41235060<br /> |STACK LIGHT STANCHION<br /> |<br /> |''Discontinued''<br /> |A/R<br /> |-<br /> |2<br /> |HW0401<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |3<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |4<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |REF<br /> |43032006<br /> |STANCHION ASSEMBLY<br /> |<br /> |''Includes items 5 through 8''<br /> |A/R<br /> |-<br /> |5<br /> |43035003<br /> |STACK LIGHT STANCHION<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43037007-2<br /> |CLAMP BRACKET<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0305<br /> |BOLT-HHCS-1/4-20 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0050<br /> |NUT-FLANGED-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |43037004-2<br /> |MOUNTING BRACKET<br /> |<br /> |''Overhead Guard only''<br /> |1<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Horn&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Horn.png|alt=BE-TS Horn|frameless|565x565px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |YE0308<br /> |BUTTON-HORN<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0317-A<br /> |AUDIBLE ALARM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0654<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |00117101-2<br /> |MOUNTING BRACKET<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |11<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Overhead Guard&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Overhead Guard.png|alt=BE-TS Overhead Guard|frameless|530x530px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817119-2<br /> |GUARD-SIDE<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |2<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0406<br /> |BOLT-HHCS-3/8-16 X 2-1/2&quot;<br /> |<br /> |<br /> |5<br /> |-<br /> |5<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |6<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |<br /> |<br /> |5<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Side Guards used on units built November 2013 to Present. Mounting hardware valid for all units with Removable Overhead Guard.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Operator Sheild&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''&lt;big&gt;''[Current] Operator Shield''&lt;/big&gt;''' ====<br /> [[File:(Current) BE-TS 30 Operator Sheild.png|alt=(Current) BE-TS 30 Operator Sheild|frameless|566x566px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43814025<br /> |OPERATOR SHIELD<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |HC0542<br /> |GASKET EDGING<br /> |<br /> |''(2) @ 38&quot; LG, (1) @ 60&quot; LG''<br /> |136&quot;<br /> |-<br /> |3<br /> |43817116-2<br /> |BRACKET-TOP<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |1412FSW<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |43817117-2<br /> |BRACKET-CENTER SUPPORT-OUTSIDE<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43817118-2<br /> |BRACKET-CENTER SUPPORT-INSIDE<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |SS0114<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |8<br /> |SS0502<br /> |LANYARD-8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |SS0501<br /> |PIN-QUICK RELEASE-3/16&quot; X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Consult factory for units built prior to November 2013 with plexiglass bolted directly to Overhead Guard structure on front and sides.'' <br /> |}<br /> <br /> ==== '''&lt;big&gt;''Operator Shield (Used Prior to November 2013)''&lt;/big&gt;''' ====<br /> [[File:BE-TS Operator Shield (Used Prior to November 2013).png|alt=BE-TS Operator Shield (Used Prior to November 2013)|frameless|559x559px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43717116<br /> |SHIELD-OPERATOR<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |43015010<br /> |FRAME-OPERATOR SHIELD WELDMENT<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43017066-2<br /> |SUPPORT-SIDE<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |43017065-2<br /> |SUPPORT-LOWER<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43017067-2<br /> |SUPPORT-UPPER<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |7<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |32<br /> |-<br /> |8<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |9<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |16<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Consult factory for units with plexiglass bolted directly to frame.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Powered Roller Cutout&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Powered Roller Cutout Photo Eye &amp; Reflector Locations (Prior to May 2022)&lt;/big&gt;''''' ====<br /> [[File:BE-TS Powered Roller Cutout Photo Eye &amp; Reflector Locations.png|alt=BE-TS Powered Roller Cutout Photo Eye &amp; Reflector Locations|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1321A<br /> |PHOTO EYE<br /> |<br /> |''† Polarized''<br /> |1<br /> |-<br /> |2<br /> |41217170-2<br /> |MOUNT-PHOTO EYE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0216<br /> |SCREW-#10-24 X 2&quot;<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |4<br /> |HW0032<br /> |NUT-NILN-#10-24<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |E1321-R<br /> |REFLECTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |41217171<br /> |MOUNT-REFLECTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |SS0803<br /> |SCREW-RHMS-#6-32 X 5/8&quot;<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |8<br /> |SS0125<br /> |BOLT-HHCS-1/4-20 X 5/8&quot;<br /> |<br /> |''††† See notes''<br /> |4<br /> |-<br /> |9<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''Quantities provided are for Single-Sided (PRC-1) Power Roller Cutout option. For units with Double Sided (PRC-2) option, quantities are double.''<br /> |-<br /> | colspan=&quot;6&quot; |''† Polarized Photo Eye recommended to prevent potential operational issues with very smooth or shiny battery cases.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Photo Eye &amp; Reflector mounting screws are trimmed to length.''<br /> |-<br /> | colspan=&quot;6&quot; |''††† Photo Eye &amp; Reflector Bracket Mounting Screws may be required to ground flush to prevent intereferance with guards.''<br /> |}<br /> '''''&lt;big&gt;Powered Roller Cutout Photo Eye &amp; Reflector Locations (May 2022 to Present)&lt;/big&gt;'''''<br /> <br /> [[File:BE-TS Powered Roller Cutout Photo Eye &amp; Reflector Locations (May 2022 to Present).png|alt=BE-TS Powered Roller Cutout Photo Eye &amp; Reflector Locations (May 2022 to Present)|frameless|555x555px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1321A<br /> |PHOTO EYE<br /> |<br /> |''† Polarized''<br /> |1<br /> |-<br /> |2<br /> |13537001-2<br /> |MOUNT-PHOTO EYE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E1321-R<br /> |REFLECTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |41217171<br /> |MOUNT-REFLECTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |SS0803<br /> |SCREW-RHMS-#6-32 X 5/8&quot;<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |PL0506<br /> |GROMMET-SEALING-2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''Quantities provided are for Single-Sided (PRC-1) Power Roller Cutout option. For units with Double Sided (PRC-2) option, quantities are double.''<br /> |-<br /> | colspan=&quot;6&quot; |''† Polarized Photo Eye recommended to prevent potential operational issues with very smooth or shiny battery cases.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Reflector mounting screws are trimmed to length.''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Powered Roller Cutout Mounting&lt;/big&gt;''''' ====<br /> [[File:BE-TS Powered Roller Cutout Mounting.png|alt=BE-TS Powered Roller Cutout Mounting|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0281<br /> |SOLENOID VALVE<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |BI0001<br /> |NIPPLE-CLOSE-#8 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |6<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |7<br /> |H1600<br /> |ADAPTER-90 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |H1546<br /> |ADAPTER-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Powered Roller Cutout Override Button&lt;/big&gt;''''' ====<br /> [[File:BE-TS Powered Roller Cutout Override Button.png|alt=BE-TS Powered Roller Cutout Override Button|frameless|568x568px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ACTUATOR-PUSH BUTTON (DISCONTINUED)<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |N/A<br /> |CONTACT BLOCK-N/C (DISCONTINUED)<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |3<br /> |E0384<br /> |ACTUATOR-PUSH BUTTON<br /> |80932002<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0386<br /> |CONTACT BLOCK-N/C<br /> |80932002<br /> |<br /> |1<br /> |-<br /> |5<br /> |E0387<br /> |DUMMY BLOCK<br /> |80932002<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0388<br /> |PUSH BUTTON-GREEN<br /> |80932002<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''Button location on dash may vary from position shown.''<br /> |-<br /> | colspan=&quot;6&quot; |''† Parts no longer available. Must order new Push-Button Switch Kit 80932002''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Powered Roller Cutout Junction Box&lt;/big&gt;''''' ====<br /> [[File:BE-TS Powered Roller Cutout Junction Box.png|alt=BE-TS Powered Roller Cutout Junction Box|frameless|535x535px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |3<br /> |-<br /> |4<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |4<br /> |-<br /> |5<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |7<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |''Mounting bolts (Not shown)''<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Level Assist&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Level Assist.png|alt=BE-TS Level Assist|frameless|568x568px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1321A<br /> |PHOTO EYE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |13537001-2<br /> |MOUNT-PHOTO EYE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |PL0502<br /> |GROMMET<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43837007<br /> |TARGET ANGLE<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |E0376<br /> |INDICATOR LIGHT<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |7<br /> |HW0152<br /> |WASHER-5/8&quot; I.D.<br /> |<br /> |''†† See notes (Not shown)''<br /> |2<br /> |-<br /> |8<br /> |E1321-RT<br /> |REFLECTIVE TAPE<br /> |<br /> |''(Not shown)''<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''Location of Indicator Light on the dash may vary from location shown''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Extractors built prior to October 2021 used Multi-Piece Indicator Lights with Replaceable Bulb and Lens are no longer available. Current Indicator Light is a 1-Piece LED Assembly. Replacement of any Multi-Piece Component requires replacing entire assembly with current, 1-Piece Indicator Light.''<br /> |-<br /> | colspan=&quot;6&quot; |''††† Washers required for units that did not ship with Level Assist option from the factory.''<br /> |}<br /> '''&lt;big&gt;''Level Assist Junction Box''&lt;/big&gt;'''<br /> <br /> [[File:BE-TS Level Assist Junction Box.png|alt=BE-TS Level Assist Junction Box|frameless|524x524px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |4<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |5<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |''Mounting bolts (Not shown)''<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Blue Light&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Blue Light.png|alt=BE-TS Blue Light|frameless|611x611px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |EW2002B<br /> |BLUE PROJECTION SPOTLIGHT<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW0401<br /> |BOLT-HHCS-3/8-16 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0107<br /> |WASHER-LOCK-3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |4<br /> |-<br /> |5<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43835001<br /> |STANCHION-POWER<br /> |<br /> |<br /> |2<br /> |}<br /> [[File:BE-TS Blue Light Enclosure.png|alt=BE-TS Blue Light Enclosure|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-8&quot; X 8&quot; X 4&quot;<br /> |<br /> |''Consult factory''<br /> |1<br /> |-<br /> |2<br /> |E0135<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |''Blank panel without holes''<br /> |1<br /> |-<br /> |3<br /> |PS5R-SC12<br /> |POWER SUPPLY<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0908<br /> |MOUNTING RAIL<br /> |<br /> |''Sold by length''<br /> |A/R<br /> |-<br /> |5<br /> |YE0402<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |YE0405<br /> |END BARRIER<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |YE0406<br /> |END ANCHOR<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |E0341<br /> |GROUND LUG<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |3<br /> |-<br /> |10<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |11<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |''2 per Mounting Rail''<br /> |5<br /> |-<br /> |12<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |''2 per Mounting Rail''<br /> |5<br /> |-<br /> |13<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |''2 per Mounting Rail''<br /> |5<br /> |-<br /> |14<br /> |00196404<br /> |LABEL-DANGER<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Water Cart&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Water Cart.png|alt=BE-TS Water Cart|frameless|549x549px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PB0033<br /> |OVERFILL INDICATOR<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |PB0034<br /> |LOCKNUT-CONDUIT-2&quot;-NYLON<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0308<br /> |FILLER/BREATHER ASSEMBLY<br /> |<br /> |Includes gaskets<br /> |1<br /> |-<br /> |4<br /> |HW0209<br /> |SCREW-RHMS-10-32 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |5<br /> |550-057<br /> |HOSE-FILL-3/4&quot; X 15'<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |550-027<br /> |ON/OFF VALVE<br /> |<br /> |''(Not shown)''<br /> |1<br /> |-<br /> |7<br /> |PB0902<br /> |HOSE-3/4&quot;<br /> |<br /> |<br /> |30&quot;<br /> |-<br /> |8<br /> |HW1018<br /> |HOSE CLAMP-3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |PB0603<br /> |ADAPTER-3/4&quot; NPT X 3/4&quot; BARB<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |PB0456<br /> |ELBOW-STR-90 DEG-3/4&quot; NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |PB0451<br /> |ADAPTER-3/4&quot; NPT X 3/4 GHT<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |PB0302<br /> |PLUG-3/4&quot; NPT<br /> |<br /> |<br /> |<br /> |-<br /> |13<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |14<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |SS0106<br /> |SHCS-#10-24 X 1/2&quot;-SST<br /> |<br /> |<br /> |6<br /> |-<br /> |16<br /> |SS0114<br /> |BHSCS-#10-24 X 1/2&quot; SST<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |SS0301<br /> |WASHER-FLAT-#10-SAE-SST<br /> |<br /> |<br /> |10<br /> |-<br /> |18<br /> |00196701<br /> |DECAL-BHS-12&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |00196404<br /> |LABEL-DANGER-&quot;120 VOLTS&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |20<br /> |00166648<br /> |LABEL, NON-POTABLE<br /> |<br /> |<br /> |1<br /> |-<br /> |21<br /> |HW0418<br /> |BOLT-HHCS-3/8-16 X 2-1/4&quot;<br /> |<br /> | rowspan=&quot;3&quot; |''Mounting bolts'' <br /> <br /> ''(Not shown)''<br /> |2<br /> |-<br /> |22<br /> |HW0031<br /> |NUT-HEX-3/8-16 CENTERLOCK<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |2<br /> |}<br /> [[File:BE-TS Water Cart 2.png|alt=BE-TS Water Cart|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PB0150<br /> |PUMP-SUBMERSIBLE<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |HW1018<br /> |HOSE CLAMP-3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |46932005<br /> |LEVEL SWITCH CONDUIT ASSEMBLY<br /> |<br /> |''Includes (2) Item #4 and wiring''<br /> |1<br /> |-<br /> |4<br /> |E1381<br /> |SWITCH-LIQUID LEVEL<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |SS0760<br /> |HOSE CLAMP-4&quot; TO 7&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1019<br /> |HOSE CLAMP-1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |SS06010<br /> |HANDLE<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Hose barb fitting modified at factory during assembly to remove threaded portion from hose barb end. Modification of fitting required prior to installing replacement pump.''<br /> |}<br /> [[File:BE-TS Water Cart 02.png|alt=BE-TS Water Cart 02|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1511<br /> |SWITCH-ROCKER<br /> |<br /> |''Submersible rated''<br /> |1<br /> |-<br /> |2<br /> |E0378<br /> |INDICATOR LIGHT-120VAC-GREEN<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |3<br /> |E0376<br /> |INDICATOR LIGHT-120VAC-AMBER<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |4<br /> |E0377<br /> |INDICATOR LIGHT-120VAC-RED<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |5<br /> |46917015<br /> |PLACARD-INDICATOR LIGHT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0505<br /> |16-3 SO CORD<br /> |<br /> |<br /> |72&quot;<br /> |-<br /> |7<br /> |E0653<br /> |PLUG-120V/15A<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |9<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |PL0501<br /> |GROMMET-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |E1313<br /> |SOCKET-RELAY-8 PIN<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |E0331<br /> |RELAY-DPDT-110VAC<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |E0440<br /> |TERMINAL BLOCK-8 POLE<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |E1070<br /> |GROUND BAR-4 POSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |HW0139<br /> |SCREW-RHMS-#8-32 X 1 1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |HW0135<br /> |SCREW-RHMS-#8-32 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW1061<br /> |SCREW-RHMS-#8-32 X 1&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |5<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Water carts built prior to October 2021 used Multi-Piece Indicator Lights with Replaceable Bulb and Lens and are no longer available. Current Indicator Lights are a 1-Piece LED Assemblly.''<br /> ''Replacement of any Mutli-Piece component requires replacing entire assembly with current 1-Piece Indicator Light.''<br /> |}<br /> <br /> = &lt;big&gt;Service &amp; Maintenance&lt;/big&gt; =<br /> <br /> == &lt;big&gt;Daily Inspection List&lt;/big&gt; ==<br /> The points listed below should be visually inspected daily prior to initial start up of the Battery Extractor to ensure safe and proper operation of the unit and to help avoid unnecessary down time.<br /> <br /> # Walk around unit and inspect for any physical damage to machine not previously noted.<br /> # Verify all guards are in place.<br /> # Inspect the AC power feed for any damage.<br /> # Vacuum equipped units: Inspect vacuum cups for damage to cup sealing surface, backup casting, and vacuum hoses. Magnet equipped units: Inspect magnets for damage to attachment face, proximity sensor cover, cables and connections.<br /> # Inspect travel path and area around unit for any hydraulic oil that could be a potential repair/maintenance issue and/or safety hazard.<br /> # Check oil level in hydraulic reservoir at fill level gauge.<br /> # Check that operator safety gate and all safety switches are in proper working order.<br /> # Verify extractor path is free of obstructions.<br /> # Check roller beds for any debris and clean as required.<br /> # Board unit, engage system and verify all functions are operating properly and that no abnormal or unusual noises are present.<br /> <br /> ''* Use form IF-5008 when preforming daily inspections''<br /> <br /> == &lt;big&gt;Operator's Daily Checklist&lt;/big&gt; ==<br /> [[File:BE-TS Operator's Daily Checklist.png|alt=BE-TS Operator's Daily Checklist|frameless|1180x1180px]]<br /> <br /> == &lt;big&gt;Recommended Battery Extractor Lubrication Intervals&lt;/big&gt; ==<br /> {| class=&quot;wikitable&quot;<br /> !Lubrication Task<br /> !'''# of Places'''<br /> !Intervals<br /> |-<br /> |'''1. Lubricate grease fittings using #2 lithium based grease'''<br /> |<br /> |<br /> |-<br /> |A. Extractor arm drive nut and carrier bearings<br /> |5 places<br /> |50 hrs / Weekly<br /> |-<br /> |B. Idler casters<br /> |2 places<br /> |200 hrs / Weekly<br /> |-<br /> |'''2. Wipe off and lubricate chains using light machine oil'''<br /> |<br /> |<br /> |-<br /> |A. #80 Lift chains (Not applicable to BE-SL units)<br /> |4 places<br /> |200 hrs / Monthly<br /> |-<br /> |B. #60 Equalization chains<br /> |4 places<br /> |200 hrs / Monthly<br /> |-<br /> |C. #35 Powered roller chains<br /> |8 places<br /> |200 hrs / Monthly<br /> |-<br /> |'''3. Change return line hydraulic fluid filter'''<br /> ''(Oil filtration of at least 20 microns is recommended)''<br /> |1 place<br /> |300 hrs / Twice Quarterly<br /> |-<br /> |'''4. Change hydraulic fluid'''<br /> | -<br /> |600 hrs / Quarterly *<br /> |-<br /> |'''5. Complete preventative maintenance (PM)'''<br /> Use form IF-5029 for Vacuum equipped units.<br /> <br /> Use form IF-5028 for Magnet equipped units.<br /> | -<br /> |600 hrs / Quarterly<br /> |-<br /> ! colspan=&quot;3&quot; |NOTES<br /> |-<br /> | colspan=&quot;3&quot; |''These recommendations are based on average use in a typical warehouse environment and may be adjusted based on specific circumstances. Dusty and/or extreme hot/cold environments may require more frequent lubrication.''<br /> |-<br /> | colspan=&quot;3&quot; |''* BHS recommends implementing an oil sampling and analysis program to monitor hydraulic fluid condition and determine when hydraulic fluid changes are required. The fluid analysis program should be a continuous process and all results should be evaluated. Changes in the condition of the hydraulic system may indicate component wear, fluid deterioration and/or contamination.''<br /> |}<br /> {|<br /> |[[File:NOTICE-warn.png|alt=NOTICE|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:NOTICE-warn.png]]<br /> |<br /> *'''The mounted bearings used on the power rollers, equalization shafts, drive wheels, and drive screw are sealed and shielded bearings. Lubrication may breach the seals of these bearings, therefore these bearings should not be lubricated unless the machine has been cleaned with a high pressure wash on a regular basis (not recommended).'''<br /> *'''Hydraulic fluid should not exceed 140°F (60°C) for extended periods.'''<br /> |}<br /> ===&lt;big&gt;'''&lt;u&gt;Reservoir Capacities ''(APPROX.)''&lt;/u&gt;'''&lt;/big&gt;===<br /> {|<br /> |BE-SL<br /> |18 gal (68 L)<br /> |-<br /> |BE-DS<br /> |18 gal (68 L)<br /> |-<br /> | rowspan=&quot;2&quot; |BE-TS<br /> |30 gal (114 L) ''(Units built Pre-2014)''<br /> |-<br /> |45 gal (170 L) ''(Units built 2014 to Present)''<br /> |-<br /> |BE-QS<br /> |60 gal (227 L)<br /> |}The reservoir should be filled so fluid level is within a half inch (1/2&quot;) of the top of sight glass. Use Chevron AW 68 or equivalent ISO 68 grade hydraulic oil with anti-wear additives and foam suppressant.<br /> <br /> '''''NOTE'':''' Some units shipped from the factory with AW 32 oil for cold environment operation. Units using AW 32 from the factory may experience poor performance if AW 68 is used instead of AW 32 due to the increased viscosity of the oil.<br /> <br /> ==&lt;big&gt;Preventative Maintenance Reports&lt;/big&gt;==<br /> ===&lt;big&gt;&lt;u&gt;Vacuum Extraction&lt;/u&gt;&lt;/big&gt;===<br /> [[File:Battery Extractor Series - Vacuum Extraction Planned Maintenance Inspection Report Page 1.png|alt=Battery Extractor Series - Vacuum Extraction Planned Maintenance Inspection Report Page1|frameless|1238x1238px|link=https://tech.bhs1.com/index.php/File:Battery_Extractor_Series_-_Vacuum_Extraction_Planned_Maintenance_Inspection_Report_Page_1.png]]<br /> <br /> [[File:Battery Extractor Series - Vacuum Extraction Planned Maintenance Inspection Report page2.png|alt=Battery Extractor Series - Vacuum Extraction Planned Maintenance Inspection Report Page 2|frameless|1230x1230px|link=https://tech.bhs1.com/index.php/File:Battery_Extractor_Series_-_Vacuum_Extraction_Planned_Maintenance_Inspection_Report_page2.png]]<br /> ===&lt;big&gt;&lt;u&gt;Magnet Extraction&lt;/u&gt;&lt;/big&gt;===<br /> [[File:Battery Extractor Series - Magnet Extraction Planned Maintenance Inspection Report Page 1.png|alt=Battery Extractor Series - Magnet Extraction Planned Maintenance Inspection Report Page 1|frameless|1224x1224px|link=https://tech.bhs1.com/index.php/File:Battery_Extractor_Series_-_Magnet_Extraction_Planned_Maintenance_Inspection_Report_Page_1.png]]<br /> <br /> [[File:Battery Extractor Series - Magnet Extraction Planned Maintenance Inspection Report Page 2.png|alt=Battery Extractor Series - Magnet Extraction Planned Maintenance Inspection Report Page 2|frameless|1233x1233px|link=https://tech.bhs1.com/index.php/File:Battery_Extractor_Series_-_Magnet_Extraction_Planned_Maintenance_Inspection_Report_Page_2.png]]<br /> <br /> ==&lt;big&gt;80292002-i – Equalization Chain Installation / Resetting Procedure&lt;/big&gt;==<br /> ===&lt;big&gt;&lt;u&gt;Required Tools&lt;/u&gt;&lt;/big&gt;===<br /> *Large standard screwdriver<br /> *1/8&quot;, 5/32&quot;, 3/16&quot; Allen wrench<br /> *(2) 1-1/8&quot; Open-end wrenches<br /> *Needle nose pliers<br /> *6&quot; Steel scale (ruler)<br /> *Brake cleaner (non-chlorinated)<br /> *Loctite #242 (blue)<br /> *80292002 - E.Q. Adjustment stop kit (SL, DS, TS) or 80492001 - BE-QS E.Q. Adjustment stop kit<br /> *Ladder or work platform ''(see notes)''<br /> ===&lt;big&gt;&lt;u&gt;''Optional Tools''&lt;/u&gt;&lt;/big&gt;===<br /> *Wire brush for removing Loctite from components prior to reassembly<br /> ===&lt;big&gt;&lt;u&gt;Notes&lt;/u&gt;&lt;/big&gt;===<br /> *''A ladder, man lift or other device is required to access the upper E.Q. studs on BE-TS and BE-QS units.''<br /> *''The following procedures must be performed with the extractor unloaded and in a level area of the travel path.''<br /> *''Installation of the E.Q. stop kit requires (4) persons plus a trained battery extractor operator to raise and lower the inner carriage.''<br /> *''It is recommended to have new E.Q. chain connecting links on hand prior to performing the following procedures.''<br /> *''The upper E.Q. stud lock washers cannot be reused and must be replaced prior to reassembly.''<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Page 369 Image 0001.png|alt=BE-TS with EQ Adjustment Stops Installed|none|thumb|300x300px|BE-TS with EQ Adjustment Stops Installed|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Page_369_Image_0001.png]]<br /> ===&lt;big&gt;&lt;u&gt;IMPORTANT&lt;/u&gt;&lt;/big&gt;===<br /> *'''Read and understand the Safety and De-energization Procedure TP-606 before starting this procedure.'''<br /> *'''Read and understand these instructions completely before starting this procedure.'''<br /> ===&lt;big&gt;&lt;u&gt;Procedure&lt;/u&gt;&lt;/big&gt;===<br /> 1. Remove the inner and outer frame guards to access the lower equalization studs.<br /> <br /> 2. Raise the inner frame approximately 30&quot; (762 mm) for SL, DS and TS units or 50&quot; (1270 mm) for QS units from the fully lowered position. Install (1) adjustment stop at each corner of the roller bed. See Figure 1.[[File:IOP-400 BE-SL&amp;DS (10-23) EQ Chain Instructions-Figure1.png|alt=|none|thumb|375x375px|FIGURE 1|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_EQ_Chain_Instructions-Figure1.png]]3. Slowly lower the inner carriage until the roller bed is firmly and securely seated against all four stops. See Figure 2.[[File:IOP-400 BE-SL&amp;DS (10-23) Page 370 Image 0002.png|alt=Roller bed firmly seated against all four stops|none|thumb|398x398px|FIGURE 2|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Page_370_Image_0002.png]]4. Lockout/tagout the B.E. per your corporate policy.<br /> <br /> 5. De-energize the B.E. per BHS Safety and De-energization procedure TP-606.<br /> <br /> 6. Loosen and remove the upper hex nuts and remove the upper chain studs. Remove the lock washers from the upper chain studs. Save the hex nuts for reassembly later. Discard the lock washers and obtain new, 3/4&quot; split-ring lock washers for reassembly.<br /> <br /> 7. If replacing the chain, remove the upper stud and remove the chain from the lower stud. Discard the connecting links.<br /> *''If the E.Q. chains are being reset due to a connecting link failure, it is recommended to also replace the stud where the connecting link failed.''<br /> *''It is recommended to replace the connecting links when replacing or resetting the E.Q. chains.''<br /> 8. If replacing a lower stud, remove the connecting link and disconnect the chain. Loosen the hex nut and remove the stud. Remove the hex nut from the old stud and reinstall it on the new stud. Reinstall the new stud so that it is flush with the bottom of the frame and the hole is aligned front-to-back with the extractor.<br /> <br /> 9. Attach the chains to the lower studs using the connecting links. Attach the upper studs to the chains using the connecting links, making sure the nut is threaded down near the connecting link and lay the chains in the frame. See Figure 3.<br /> *''Do not fully assemble the lower connecting links by bending the cotter pins as the connecting link may need to be removed later for stud adjustment.''[[File:IOP-400 BE-SL&amp;DS (10-23) EQ Chain Attached to Upper Stud.png|alt=BE-TS Chain Attached to Upper Stud|none|thumb|300x300px|FIGURE 3|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_EQ_Chain_Attached_to_Upper_Stud.png]]<br /> 10. If new E.Q. sprockets are to be installed, remove the clamp collars and old sprockets. Install the new sprockets and reinstall the clamp collars. DO NOT tighten the set screws at this point as adjustment/alignment may be required.<br /> *''Sprockets MUST be keyed in-line.''<br /> 11. Align the E.Q. shafts so that the keyways are in the 2 o'clock position (approximately 60 degrees from vertical). This will bring the sprocket set screws to the top of the sprocket when the inner carriage is lowered. See Figure 4.[[File:IOP-400 BE-SL&amp;DS (10-23) EQ Shafts aligned 60 Degrees from Vertical.png|alt=BE-TS EQ Shafts aligned 60 Degrees from Vertical|none|thumb|300x300px|FIGURE 4|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_EQ_Shafts_aligned_60_Degrees_from_Vertical.png]]12. Starting with the inside chain, route the chain over the sprocket directly above the lower stud and under the inside sprocket on the opposite shaft. Attach the upper stud to the top cross bar, making sure a new 3/4&quot; split -ring lock washer is installed between the cross bar and lower hex nut. Hand tighten the upper stud adjusting nut to remove slack from the chain. See Figure 5.<br /> <br /> 13. Route the outer chain over the sprocket, above the stud and under the sprocket on the opposite shaft. Attach the upper stud to the top cross bar, making sure a new, 3/4&quot; split-ring lock washer is installed between the cross bar and lower hex nut. Hand tighten the upper stud adjusting nut to remove slack from the chain. See Figure 5.<br /> *''It is recommended to begin at the operator end where room is limited allowing easier access at the opposite end to route the chain under the final sprocket.''<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Inside and Outside EQ Chains.png|alt=BE-TS Inside and Outside EQ Chains|none|thumb|499x499px|FIGURE 5|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Inside_and_Outside_EQ_Chains.png]]14. Repeat steps 11 through 13 for the opposite side of the extractor. It is likely that a large, standard screwdriver will be necessary to position the final chain over the sprocket. See Figure 6.[[File:IOP-400 BE-SL&amp;DS (10-23) Page 371 Image 0002.png|alt=It is likely that a large, standard screwdriver will be necessary to position the final chain over the sprocket.|none|thumb|300x300px|FIGURE 6|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Page_371_Image_0002.png]]15. Adjust the lower studs up or down as necessary to take the slack out of the chain between the lower studs and the sprockets by removing the connecting link from the stud and turning the stud. Tighten the hex nuts against the frame once the studs have been adjusted. Reattach the chain.<br /> *DO NOT allow the stud to twist when tightening the hex nuts.<br /> 16. Tighten the upper hex nut on the upper studs until there is approximately 1/4&quot; (7 mm) of total deflection in the middle of the upper, vertical chain sections. Tighten the lower hex nuts on the upper studs to lock the studs in place.<br /> *''Each section of chain between the sprockets should have approximately the same tension as the other on the same side. See Figure 5.''<br /> 17. Raise the inner frame and remove the adjustment stops from the four corners and lower the inside frame.<br /> <br /> 18. Verify equalization sprocket and stud alignment by using a 6&quot; scale. Measure the distance from the inside roller bed frame to the center of the equalization stud. Compare this distance with the measurements from the inside roller bed frame to the center-lines of the sprockets. Adjust the position of the sprocket as necessary to make the distances equal. This will ensure the chain and sprockets are in line with the stud. Repeat this process for the three remaining chains. See Figures 7 &amp; 8.<br /> <br /> 19. Raise and lower the inner frame several times and listen for any chain popping noises to confirm the sprockets are in line with the lower studs. If there is no popping noise, lower the inner frame all the way down.[[File:IOP-400 BE-SL&amp;DS (10-23) EQ Chain Verify equalization sprocket and stud alignment by using a 6in scale-Fig7.png|alt=BE-TS EQ Chain Procedure Figure 7 - Verify equalization sprocket and stud alignment by using a 6&quot; scale|none|thumb|300x300px|FIGURE 7|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_EQ_Chain_Verify_equalization_sprocket_and_stud_alignment_by_using_a_6in_scale-Fig7.png]][[File:IOP-400 BE-SL&amp;DS (10-23) EQ Chain Verify equalization sprocket and stud alignment by using a 6in scale-Fig8.png|alt=BE-TS EQ Chain Verify equalization sprocket and stud alignment by using a 6in scale - Fig 8|none|thumb|300x300px|FIGURE 8|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_EQ_Chain_Verify_equalization_sprocket_and_stud_alignment_by_using_a_6in_scale-Fig8.png]]20. Clean any existing, hardened Loctite from the sprockets, sprocket sets screws, clamp collars and clamp collar bolts.<br /> <br /> 21. Apply Loctite to and tighten the set screws on the sprockets. Slide the clamp collars against the outside sprocket, loctite and tighten the clamp collars.<br /> ==&lt;big&gt;80292001-i – Battery Extractor Service Stand Installation Instructions&lt;/big&gt;==<br /> ===&lt;big&gt;&lt;u&gt;Required Tools&lt;/u&gt;&lt;/big&gt;===<br /> None<br /> ===&lt;big&gt;&lt;u&gt;Notes&lt;/u&gt;&lt;/big&gt;===<br /> *''Refer to kit part # 80292001 or 80392001 for the complete bill of materials supplied.''<br /> *''Remove ALL batteries from extractor prior to installation / service.''<br /> *''Installation of service stands requires (2) persons plus a trained battery extractor operator to raise and lower the inner carriage. DO NOT attempt installation with less than (3) persons.''<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Single Level Service Stand Properly Installed.png|alt=Single Level Service Stand Properly Installed|none|thumb|368x368px|Single Level Service Stand Properly Installed|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Single_Level_Service_Stand_Properly_Installed.png]]<br /> ===&lt;big&gt;&lt;u&gt;IMPORTANT&lt;/u&gt;&lt;/big&gt;===<br /> *'''Read and understand the Safety and De-energization Procedure TP-606 before starting this procedure.'''<br /> *'''Read and understand these instructions completely before starting this procedure.'''<br /> ===&lt;big&gt;&lt;u&gt;Procedure&lt;/u&gt;&lt;/big&gt;===<br /> 1. Have a qualified operator raise the inner carriage of the extractor to the required height for installation. For single level applications, the required height will be approximately 25&quot; (64 cm) from the fully lowered position. For double, triple, and quad stack machines, the required height will be approximately 55&quot; (140 cm) from the fully lowered position.<br /> *On double, triple, and quad stack battery extractors, the operator either must remain on the operator platform during service or be provided an OSHA approved method of egress. This is not applicable to single level battery extractors as the operator platform height is fixed.<br /> 2. Install the stands by engaging the top of the stand into the inner carriage cutouts. Place the bottom channel of the stand over the tube of the outer frame. The top flanges of each stand are tapered to aid in proper alignment of the stand with the inner frame.<br /> <br /> See Figures 1 &amp; 2.[[File:IOP-400 BE-SL&amp;DS (10-23) engaging the top of the stand into the inner carriage cutout.png|alt=Properly seated in cutout|none|thumb|300x300px|FIGURE 1|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_engaging_the_top_of_the_stand_into_the_inner_carriage_cutout.png]][[File:IOP-400 BE-SL&amp;DS (10-23) Page 374 Image 0005.png|none|thumb|300x300px|FIGURE 2|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Page_374_Image_0005.png]]3. Once BOTH stands have been properly placed, SLOWLY lower the inner carriage while the stands are held in place.<br /> <br /> 4. Once the inner carriage is firmly seated on the service stands, verify the stands are securely installed. See Figure 3.[[File:IOP-400 BE-SL&amp;DS (10-23) Page 374 Image 0006.png|none|thumb|450x450px|FIGURE 3|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Page_374_Image_0006.png]]<br /> ==&lt;big&gt;Trouble Shooting Guide&lt;/big&gt;==<br /> {| class=&quot;wikitable&quot;<br /> !Problem Symptom<br /> !Probable Cause<br /> !Solution<br /> |-<br /> |Hydraulic power Unit does not operate.<br /> No electric to power unit motor.<br /> |1. No AC power to Unit.<br /> 2. Reset on magnetic motor starter tripped.<br /> <br /> 3. Gate switch not actuated.<br /> <br /> 4. Foot Pedal switch not engaged.<br /> <br /> 5. Emergency Stop switch is depressed.<br /> |1. Check fuses or breaker.<br /> 2. Check reset button.<br /> <br /> 3. Make sure safety gate is engaging switch.<br /> <br /> 4. Check foot pedal for obstruction.<br /> <br /> 5. Reset button using machine key.<br /> |-<br /> |Power unit runs but no pressure reading at gauge,<br /> also no functions move.<br /> |1. AC input is in reverse phase. Motor is running backwards.<br /> 2. Main system relief valve stuck open or defective.<br /> <br /> 3. Coupling between motor and pump loose.<br /> |1. Reverse any two of the three hot lines to unit.<br /> 2. Check relief valve cartridge for trash or debris.<br /> <br /> Replace as required.<br /> <br /> 3. Inspect coupling assy.<br /> |-<br /> |Magnetic starter contact chatters-at startup.<br /> Contact chatters while traveling.<br /> |1. 1 leg of 3 phase input power out.<br /> 2. Safety gate and/or gate switch out of adjustment.<br /> |1. Check fuse or circuit breaker at service panel.<br /> 2. Check and adjust gate or switch as required to<br /> <br /> ensure full engagement of plunger on gate<br /> <br /> switch and that the safety gate is not bouncing<br /> <br /> due to vibration.<br /> |-<br /> |No floor travel empty or loaded-all other functions work properly.<br /> |1. Extractor arm off center-left to right.<br /> 2. Proximity switch or sensing bracket out of target range.<br /> <br /> 3. Proximity switch defective or broken.<br /> <br /> 4. Bad solenoid coil on floor cutout valve.<br /> <br /> 5. Spool on floor cutout valve stuck open.<br /> |1. Center arm.<br /> 2. Adjust as needed to achieve 1/4” clearance.<br /> <br /> 3. Check switch and replace.<br /> <br /> 4. Check solenoid and replace if needed.<br /> <br /> 5. Remove and clean spool cartridge or replace.<br /> |-<br /> |Floor travel moves but is sluggish<br /> and stalls with a load at certain points.<br /> |1. Uneven floor conditions. High/low spots.<br /> 2. Excessive tire wear.<br /> <br /> 3. Wheel shaft-to-motor shaft coupling on drive wheel assembly loose or broken.<br /> <br /> 4. Debris lodged under battery extractor.<br /> |1. Check flatness of floor. Check guidance track for scraping of guide arm on top of angle.<br /> 2. Measure under clearance of battery extractor. Should be no less than 5/8” replace poly wheels as needed.<br /> <br /> 3. Inspect drive assembly while under load to see if shafts and couplings are moving in unison. Repair as needed.<br /> <br /> 4. Inspect under unit and remove debris.<br /> |-<br /> |Inner carriage bounces while lifting under load,<br /> but not when empty.<br /> |1. Down speed adjustment valve open too far.<br /> |1. Adjust as needed to eliminate carriage bounce.<br /> |-<br /> |Inner carriage does not lift evenly.<br /> Four corners do not land evenly against outer frame tube.<br /> |1. Equalization chains are out of adjustment.<br /> 2. Excessive chain or sprocket wear.<br /> <br /> 3. Equalization chains are out of synchronization. Possibly may have jumped a sprocket tooth.<br /> <br /> 4. Broken bearing housing on mounted shaft.<br /> <br /> 5. Lift cylinder roping chains out of adjustment.<br /> |1. Readjust with the top stud until equal tension is achieved.<br /> 2. Replace as needed.<br /> <br /> 3. Evaluate and resynchronize as required.<br /> <br /> 4. Inspect and replace.<br /> <br /> 5. Readjust as needed to equal tension on all four cylinders in full down position.<br /> |}<br /> =&lt;big&gt;Aftermarket Support&lt;/big&gt;=<br /> [https://na.bhs1.com/blog/post/tt-922-technical-support Click here] for details on BHS' Aftermarket Support.<br /> =&lt;big&gt;Statement of Warranty&lt;/big&gt;=<br /> [https://store.bhs1.com/warranty Click here] for details on BHS' Statement of Warranty.</div>

Kperrier https://tech.bhs1.com/index.php?title=(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)&diff=7674 2024-04-02T17:27:20Z

<p>Kperrier: /* Water Cart */ added missing water cart</p> <hr /> <div>'''Looking for a specific replacement part?''' Ctrl-F (or Command-F for Mac users) brings up your browsers search panel and can search any text on the entire web page. Find parts by searching a part # or part description.<br /> <br /> '''Register your equipment with [https://na.bhs1.com/media-library/bhs-optima/ BHS Optima], BHS's free app.'''<br /> <br /> '''California Residents''': WARNING: This product contains chemicals known to the State of California to cause cancer and/or reproductive harm, and birth defects or other reproductive harm. [https://na.bhs1.com/about-bhs/compliance-statement-for-california-proposition-65/ Learn more here.]<br /> =&lt;big&gt;Preface&lt;/big&gt;=<br /> =&lt;big&gt;TP-606 – Safety &amp; De-Energization Procedures&lt;/big&gt;=<br /> ==&lt;big&gt;General Safety&lt;/big&gt;==<br /> {|<br /> |[[File:Read Before Operating Notice.png|alt=Read Before Operating|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:Read_Before_Operating_Notice.png]]<br /> |<br /> *Read and understand all instructions and warnings before using or servicing this equipment.<br /> *Keep these instructions for future reference.<br /> |}<br /> *Battery Extractor (BE) units shall only be operated by suitable persons of at least 18 years of age, who have been trained in the proper and safe operation of the BE and expressly certified/charged, in writing, by the user or their representative.<br /> *Only one person is permitted to travel on the BE at any time.<br /> *BE units shall only be used indoors in an industrial setting on a hard, nonslip, and level floor without defects including but not limited to holes, gouges, cracks, drains or obstacles comprised of concrete or other suitable industrial material meeting the minimum requirements specified by BHS as well as any local requirements.<br /> *A licensed structural engineer should be consulted prior to installing a BE on any building level other than the ground floor.<br /> *BE units are not designed to be shipped or transported after initial delivery.<br /> *Failure to follow these instructions and warnings may result in property damage, personal injury or death.<br /> ===&lt;big&gt;&lt;u&gt;Work Area&lt;/u&gt;&lt;/big&gt;===<br /> *Keep work area clean and well lit. Cluttered work areas and poor lighting can lead to accidents.<br /> *Clean up/contain any fluid spills immediately to prevent slips or falls.<br /> *Be aware of potential hazards when performing any service or maintenance to the unit.<br /> ===&lt;big&gt;&lt;u&gt;Service &amp; Maintenance&lt;/u&gt;&lt;/big&gt;===<br /> Service personnel shall wear Personal Protective Equipment (PPE) appropriate for the task being performed.<br /> {|<br /> |[[File:Electrical Hazard Warning.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Electrical_Hazard_Warning.png]]<br /> [[File:Danger Warning.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Danger_Warning.png|alt=DANGER]]<br /> |<br /> ===&lt;big&gt;&lt;u&gt;Lockout/Tagout&lt;/u&gt;&lt;/big&gt;===<br /> '''Lockout/tagout the BE per your corporate policy, if damaged or not functioning properly. Lockout/tagout and de-energize all systems prior to performing any maintenance or service to unit.'''<br /> |}<br /> {|<br /> |[[File:Warning-Battery-Explosion.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Warning-Battery-Explosion.png]]<br /> [[File:Danger Warning.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Danger_Warning.png|alt=DANGER]]<br /> |<br /> ===&lt;big&gt;&lt;u&gt;Lead-Acid Battery Explosion Hazard&lt;/u&gt;&lt;/big&gt;===<br /> '''DO NOT allow open flames or sparks of any kind near a battery. Highly explosive gas is generated when charging a battery that can remain in battery cells for extended periods of time after charging is complete.'''<br /> *Always wear appropriate PPE including rubber apron, gloves, boots and full face shield when performing service or maintenance to any lead-acid batteries.<br /> *DO NOT place metal or other conductive objects on top of battery. Arcing may occur causing damage to the battery and/or serious personal injury or death.<br /> *Use only chargers matching the voltage and amperage of the battery being charged. Overcharging a battery can cause damage to the battery, charger and/or serious personal injury or death.<br /> *Turn off charger before disconnecting battery from charger. Arcing between battery and charger connectors can cause damage to the connectors and/or serious personal injury or death.<br /> |}<br /> {|<br /> |[[File:Warning-Hydrualic-Hazard.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Warning-Hydrualic-Hazard.png]]<br /> [[File:Warning.png|alt=WARNING|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Warning.png]]<br /> |<br /> ===&lt;big&gt;&lt;u&gt;Hydraulic Hazards&lt;/u&gt;&lt;/big&gt;===<br /> '''AVOID HIGH PRESSURE FLUIDS-Escaping fluid under pressure can penetrate the skin causing serious injury. Relieve pressure before disconnecting hydraulic lines. Tighten all connections before applying pressure. Keep hands and body away from pin holes which eject fluids under high pressure. Use a piece of cardboard or paper to search for leaks. DO NOT use your hand.'''<br /> <br /> '''Any fluid injected into the skin under high pressure should be considered a serious medical emergency despite an initial normal appearance of the skin. There will be a delayed onset of pain, and serious tissue damage may occur. Medical attention should be sought immediately.'''<br /> |}<br /> {|<br /> ![[File:No Pacemakers Notice.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:No_Pacemakers_Notice.png]][[File:Strong Magnet Field Hazard Warning.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Strong_Magnet_Field_Hazard_Warning.png]]<br /> [[File:Warning.png|alt=WARNING|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Warning.png]]<br /> |<br /> ===&lt;big&gt;&lt;u&gt;Electromagnet Hazard&lt;/u&gt;&lt;/big&gt;===<br /> '''Units equipped with magnetic extraction generate strong magnetic fields. Persons with pacemakers &lt;u&gt;SHOULD&lt;/u&gt;''' &lt;u&gt;'''NOT'''&lt;/u&gt; '''operate or be in close proximity to equipment during operation.'''<br /> <br /> '''Failure to comply with this direction''' '''could result in serious personal injury or death.'''<br /> |}<br /> ===&lt;big&gt;&lt;u&gt;Operational Safety&lt;/u&gt;&lt;/big&gt;===<br /> *Only personnel trained in the proper and safe operation of BE units may operate or service the BE.<br /> *Operators shall wear appropriate PPE suitable for working with industrial lead-acid batteries while operating the BE ''(See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Lead-Acid_Battery_Explosion_Hazard Lead-Acid Battery Explosion Hazard] section).''<br /> *All data plates, warning labels, placards, etc. shall be in place and legible at all times. Contact BHS for re-placement data plates, warning labels, placards or instructions.<br /> *All users and service personnel shall be familiar with the meaning and risks associated with all data plates, warning labels, etc.<br /> *All operators and service personnel shall be aware of potential crush and shear points while operating or servicing the BE.<br /> *Keep hands and arms inside the operator compartment while operating the BE.<br /> *Remove BE from service if damaged, defective, or operating improperly (or becomes such while operating) until repairs can be made to correct any problem(s).<br /> *All operators shall be aware of the location of the end stops in the travel path to prevent driving the BE into the end stops.<br /> ===&lt;u&gt;&lt;big&gt;Do's and Don'ts&lt;/big&gt;&lt;/u&gt;===<br /> *'''DO NOT''' exceed the maximum capacity of the BE.<br /> *'''DO NOT''' modify or fit the BE with attachments without prior, written approval from BHS.<br /> *'''DO NOT''' perform any maintenance or service to the BE with a battery loaded on the BE.<br /> *'''DO NOT''' allow anyone to ride in or on the BE.<br /> *'''DO NOT''' operate the BE with any guard or cover removed unless required for maintenance or repair.<br /> *Disconnect the BE from all power sources before attempting to perform service or maintenance to the unit.<br /> *'''DO NOT''' drive the BE into the end stops.<br /> *'''DO NOT''' operate the BE if disengaged from the guidance track.<br /> *'''DO NOT''' allow a battery to exit the BE when a lift truck or battery stand is not present to accept the battery.<br /> *'''DO NOT''' rotate the arm onto a battery such that any part of the extractor arm, vacuum cup or magnet contacts the top of the battery.<br /> *'''DO NOT''' allow anyone to enter the area under the carriage without the service stands properly installed.<br /> *'''DO NOT''' use the BE in a manner for which it is not intended. Some examples of prohibited use are but not limited to:<br /> **To transport people<br /> **As a vehicle jack<br /> **To lift loads greater than its rated load capacity<br /> **Where unintentional movement may exist<br /> **Having direct contact with foodstuffs<br /> **In a potentially explosive atmosphere<br /> ==&lt;big&gt;De-Energization&lt;/big&gt;==<br /> 1. Fully lower the BE roller bed or position the roller bed on service stands if service requires the bed be raised. See Figures 1 &amp; 2.<br /> {|<br /> |[[File:WARNING-warn.png|alt=WARNING|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:WARNING-warn.png]]<br /> !Failure to properly support the roller bed when performing service under the BE could result in injury from the roller bed lowering unexpectedly.<br /> |}[[File:IOP-400 BE-SL&amp;DS (10-23) Fully Lower BE Roller Bed.png|alt=Fully lowered BE roller bed|none|thumb|FIGURE 1|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Fully_Lower_BE_Roller_Bed.png]][[File:IOP-400 BE-SL&amp;DS (10-23) BE Roller Bed on Service Stands .png|alt=Raised BE roller bed positioned on service stands|none|thumb|FIGURE 2|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_BE_Roller_Bed_on_Service_Stands_.png]]2. Turn key on dashboard to the “OFF” position. See Figure 3.[[File:IOP-400 BE-SL&amp;DS (10-23) De-Energization Figure 3.png|alt=Key on BE dashboard turned to the “OFF” position.|none|thumb|FIGURE 3|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_De-Energization_Figure_3.png]]3. Disconnect power to the extractor or shut off the electrical branch circuit breaker.<br /> {|<br /> |[[File:Danger Warning.png|alt=DANGER|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Danger_Warning.png]]<br /> |'''Failure to disconnect electrical power to the BE could result in electrical shock. Serious personal injury or death will occur.'''<br /> |}4. Actuate all hydraulic levers in both directions to re-lease any stored hydraulic pressure. See Figure 4.<br /> {|<br /> |[[File:WARNING-warn.png|alt=WARNING|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:WARNING-warn.png]]<br /> |'''Failure to release any stored hydraulic pres-sure could result in injury from:'''<br /> *'''Escaping hydraulic fluid under high pressure (see ''[https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Hydraulic_Hazards HYDRAULIC HAZARDS]'' in the ''[https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#General_Safety GENERAL SAFETY]'' section).'''<br /> *'''Unexpected movement of hydraulic components.'''<br /> |}[[File:IOP-400 BE-SL&amp;DS (10-23) Actuate all Hydraulic Levers in Both Directions.png|alt=Actuate all hydraulic levers in both directions to release any stored hydraulic pressure.|none|thumb|FIGURE 4|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Actuate_all_Hydraulic_Levers_in_Both_Directions.png]]<br /> ==&lt;big&gt;Labels &amp; Placards&lt;/big&gt;==<br /> '''Operators should be familiar with the meaning of the following labels and placards found on the BE to ensure proper and safe operation.'''<br /> {| class=&quot;wikitable&quot;<br /> |-<br /> ![[File:Read Before Operating Notice.png|alt=Read Before Operating|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Read_Before_Operating_Notice.png]]<br /> |'''Read and understand instruction manual prior to use.'''<br /> |-<br /> ![[File:Lockout-Before-Servicing-Notice.png|alt=Lockout Before Servicing Unit|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Lockout-Before-Servicing-Notice.png]]<br /> |'''Lockout before servicing.'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Extractor Arm Positioning Arrows.png|alt=BE-SL &amp; BE-DS Extractor Arm Positioning Arrows|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Extractor_Arm_Positioning_Arrows.png]]<br /> |'''Extractor arm positioning arrows'''<br /> |-<br /> ![[File:Do Not Operate Without Guards or Covers Notice.png|alt=DO NOT Operate Without Guards or Covers Notice|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Do_Not_Operate_Without_Guards_or_Covers_Notice.png]]<br /> |'''DO NOT operate with guards or covers removed'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) No Riders Allowed.png|alt=No riders allowed|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_No_Riders_Allowed.png]]<br /> |'''NO riders allowed.'''<br /> |-<br /> ![[File:No Pacemakers Notice.png|alt=DO NOT operate by or in close proximity to people with pacemakers.|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:No_Pacemakers_Notice.png]]<br /> |'''DO NOT operate by or in close proximity to people with pacemakers.'''<br /> |-<br /> ![[File:Strong Magnet Field Hazard Warning.png|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Strong_Magnet_Field_Hazard_Warning.png]]<br /> [[File:Warning.png|alt=WARNING|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Warning.png]]<br /> |'''Strong Magnet Field Hazard'''<br /> *Attraction between magnet and metallic objects can crush.<br /> *Keep unsecured metallic objects away from magnet.<br /> *De-energize and lockout/tagout before servicing.<br /> |-<br /> ![[File:Chain Entanglement Hazard Warning.png|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Chain_Entanglement_Hazard_Warning.png]]<br /> [[File:Warning.png|alt=WARNING|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Warning.png]]<br /> |'''Chain Entanglement Hazard'''<br /> *Moving chains and sprockets can crush and cut.<br /> *Keep hands and fingers clear. Do not operate with guards removed.<br /> *De-energize and lockout/tagout before servicing.<br /> |-<br /> ![[File:Electrical Hazard Warning.png|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Electrical_Hazard_Warning.png]]<br /> [[File:Danger Warning.png|alt=DANGER|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Danger_Warning.png]]<br /> |'''Electrical Hazard'''<br /> *Energized components can cause electrical shock.<br /> *De-energize and lockout/tagout before servicing.<br /> |-<br /> ![[File:BE-SL and BE-DS Power Off-On.png|alt=BE-SL and BE-DS Power Off-On|frameless|180x180px|link=https://tech.bhs1.com/index.php/File:BE-SL_and_BE-DS_Power_Off-On.png]]<br /> |'''Power Off/On'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Horn Control.png|alt=BE-SL and BE-DS Horn Control |frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Horn_Control.png]]<br /> |'''Horn (If equipped)'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Vacuum Control.png|alt=BE-SL and BE-DS Vacuum Control |frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Vacuum_Control.png]]<br /> |'''Vacuum Off/On (If equipped)'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Magnet Extraction.png|alt=BE-SL and BE-DS Magnet Off/On|frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Magnet_Extraction.png]]<br /> |'''Magnet Off/On (If equipped)'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Powered Roller Cut Off Override.png|alt=BE-SL and BE-DS Powered Roller Cut Off Override|frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Powered_Roller_Cut_Off_Override.png]]<br /> |'''Powered Roller Cutout Override (If equipped)'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Rack-Level-Assist.png|alt=BE-SL and BE-DS Rack Level Assist |frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Rack-Level-Assist.png]]<br /> |'''Rack Level Assist Indicator (If equipped)'''<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> ! rowspan=&quot;3&quot; |[[File:IOP-400_BE-SL&amp;DS_(10-23)_Power_Rollers_and_Arm_Travel.png.png|alt=BE-SL &amp; DS Powered Roller and Arm Travel Controls|frameless|504x504px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Power_Rollers_and_Arm_Travel.png.png]]<br /> |'''Far Power Rollers'''<br /> |-<br /> |'''Arm Travel'''<br /> |-<br /> |'''Near Power Rollers'''<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> |+''BE-SL &amp; DS UNITS ONLY''<br /> ! colspan=&quot;3&quot; |[[File:IOP-400 BE-SL&amp;DS (10-23) BE-SL&amp;DS Units Platform Controls.png|alt=BE-SL &amp; DS Specific Controls|frameless|460x460px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_BE-SL&amp;DS_Units_Platform_Controls.png]]<br /> |-<br /> |Drive Forward/Reverse<br /> |Platform Raise/Lower<br /> |Arm Rotation Near/Far<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> |+''BE-TS &amp; QS UNITS ONLY''<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) BE-TS &amp; BE-QS Platform Raise and Lower Controls.png|alt=BE-TS &amp; BE-QS Platform Raise and Lower Controls|frameless|240x240px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_BE-TS_&amp;_BE-QS_Platform_Raise_and_Lower_Controls.png]]<br /> ! colspan=&quot;2&quot; |[[File:IOP-400 BE-SL&amp;DS (10-23)BE-TS &amp; BE-QS Specific Controls.png|alt=BE-TS &amp; BE-QS Specific-Controls|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)BE-TS_&amp;_BE-QS_Specific_Controls.png]]<br /> |-<br /> |Platform Raise/Lower<br /> |Drive Foward/Reverse<br /> |Arm Rotation Near/Far<br /> |}<br /> =&lt;big&gt;General Information&lt;/big&gt;=<br /> ==&lt;big&gt;Specification Data&lt;/big&gt;==<br /> [[File:BE-TS Specification Data.png|alt=IOP-401 BE-TS (10-23) Specification Data|frameless|600x600px]]<br /> {| class=&quot;wikitable&quot;<br /> | colspan=&quot;2&quot; |<br /> !BE-24-2-TS<br /> !BE-36-2-TS<br /> !BE-42-2-TS<br /> |-<br /> !A<br /> |Overall Length<br /> |156.5&quot;<br /> |180.5&quot;<br /> |192.5&quot;<br /> |-<br /> !B<br /> |Overall Width<br /> |72&quot;<br /> |72&quot;<br /> |72&quot;<br /> |-<br /> !C<br /> |Overall Height (Lowered)<br /> |158.188&quot;<br /> |158.188&quot;<br /> |160.688&quot;<br /> |-<br /> !<br /> |Overall Height (Raised w/ Overhead Guard)<br /> |182.375&quot;<br /> |182.375&quot;<br /> |182.375&quot;<br /> |-<br /> !<br /> |Overall Height (Raised w/ Strobe &amp; Alarm)<br /> |191.75&quot;<br /> |191.75&quot;<br /> |191.75&quot;<br /> |-<br /> !D<br /> |Wheel Base<br /> |98&quot;<br /> |122&quot;<br /> |134&quot;<br /> |-<br /> !E<br /> |Drive Wheel Center line<br /> |51&quot;<br /> |51&quot;<br /> |51&quot;<br /> |-<br /> !F<br /> |Battery Compartment Width<br /> |24&quot;<br /> |36&quot;<br /> |42&quot;<br /> |-<br /> !G<br /> |Ground Clearance<br /> |.625&quot;<br /> |.625&quot;<br /> |.625&quot;<br /> |-<br /> !H<br /> |Minimum Roller Height<br /> |6.5&quot;<br /> |6.5&quot;<br /> |6.5&quot;<br /> |-<br /> !I<br /> |Maximum Roller Height<br /> |96&quot;<br /> |96&quot;<br /> |96&quot;<br /> |-<br /> !J<br /> |Operator Platform Height (Lowered/Raised)<br /> |11&quot; / 103&quot;<br /> |11&quot; / 103&quot;<br /> |11&quot; / 103&quot;<br /> |}<br /> <br /> === UNITS WITH 10 HP POWER UNIT USED PRIOR TO DECEMBER, 2014 ===<br /> {| class=&quot;wikitable&quot;<br /> !<br /> !BE-24-2-TS<br /> !BE-36-2-TS<br /> !BE-42-2-TS<br /> |-<br /> |Travel Speed<br /> |0 to 190 ft/min / 0 to 0.97 m/s<br /> |0 to 190 ft/min / 0 to 0.97 m/s<br /> |0 to 190 ft/min / 0 to 0.97 m/s<br /> |-<br /> |Raise - Lower Speed<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |-<br /> |Powered Roller Speed<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |-<br /> |Arm Traverse Speed<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |-<br /> |Arm Rotation Time<br /> |6 s to 8 s<br /> |6 s to 8 s<br /> |6 s to 8 s<br /> |-<br /> |Draw Bar Pull / Vacuum<br /> <br /> (12&quot; / 305 mm Round Cup)<br /> |1,000 lb / 454 kg<br /> |1,000 lb / 454 kg<br /> |1,000 lb / 454 kg<br /> |-<br /> |Draw Bar Pull Magnet*<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |-<br /> |Vacuum Attach Time<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |-<br /> |Vacuum Release Time<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |-<br /> |Input Voltage<br /> |480 V / 3 ph / 60Hz<br /> |480 V / 3 ph / 60Hz<br /> |480 V / 3 ph / 60Hz<br /> |-<br /> |AC Current Draw<br /> |16.5 A<br /> |16.5 A<br /> |16.5 A<br /> |-<br /> |Control Circuit Voltage<br /> |120 V ac<br /> |120 V ac<br /> |120 V ac<br /> |-<br /> |Hydraulic Power Unit<br /> |10 hp / 7.46 kW<br /> |10 hp / 7.46 kW<br /> |10 hp / 7.46 kW<br /> |-<br /> |Hydraulic Pump<br /> |16 gal/min / 61 L/min<br /> |16 gal/min / 61 L/min<br /> |16 gal/min / 61 L/min<br /> |-<br /> |Power Unit<br /> |Hydraulic, Variable Displacement<br /> |Hydraulic, Variable Displacement<br /> |Hydraulic, Variable Displacement<br /> |-<br /> |Operating Pressure<br /> |1,500 psi / 103 bar<br /> |1,500 psi / 103 bar<br /> |1,500 psi / 103 bar<br /> |-<br /> |Vacuum Pump<br /> |1/3 hp / 0.25 kW<br /> |1/3 hp / 0.25 kW<br /> |1/3 hp / 0.25 kW<br /> |-<br /> |Vacuum<br /> |21&quot; Hg / 711 mbar<br /> |21&quot; Hg / 711 mbar<br /> |21&quot; Hg / 711 mbar<br /> |-<br /> |Full Load Capacity<br /> |10,000 lb / 4535 kg<br /> |10,000 lb / 4535 kg<br /> |10,000 lb / 4535 kg<br /> |-<br /> |Weight (Empty)<br /> |8,000 lb / 3629 kg<br /> |8,300 lb / 3765 kg<br /> |8,600 lb / 3901 kg<br /> |-<br /> |Total Compartment Rollers / Powered<br /> |11/5<br /> |11/5<br /> |11/5<br /> |-<br /> |Guide Track<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |-<br /> |Overall Dimensions (L x W x H)<br /> |156.5&quot; x 72&quot; x 158.188&quot;<br /> <br /> 3975 mm x 1829 mm x 4018 mm<br /> |180.5&quot; x 72&quot; x 158.188&quot;<br /> <br /> 4585 mm x 1829 mm x 4018 mm<br /> |192.5&quot; x 72&quot; x 160.688&quot;<br /> <br /> 4890 mm x 1829 mm x 4081 mm<br /> |-<br /> |Vacuum Arm Reach<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |-<br /> |Vacuum Arm Reach (Hydraulic Extension)<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |-<br /> |Magnet Arm Reach (Hydraulic Extension) Truck Side<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |-<br /> |Wheel Base<br /> |98&quot; / 2489 mm<br /> |122&quot; / 3099 mm<br /> |134&quot; / 3404 mm<br /> |-<br /> |Drive Wheel Center Line<br /> |51&quot; / 1295 mm<br /> |51&quot; / 1295 mm<br /> |51&quot; / 1295 mm<br /> |-<br /> |Battery Compartment Width<br /> |24&quot; / 610 mm<br /> |36&quot; / 915 mm<br /> |42&quot; / 1067 mm<br /> |-<br /> |Maximum Battery Dimensions<br /> <br /> (L x W x H)<br /> |48&quot; x 23&quot; x 34&quot;<br /> <br /> 1219 mm x 584 mm x 864 mm<br /> |48&quot; x 35&quot; x 34&quot;<br /> <br /> 1219 mm x 889 mm x 864 mm<br /> |48&quot; x 41&quot; x 34&quot;<br /> <br /> 1219 mm x 1041 mm x 864 mm<br /> |-<br /> |Minimum Battery Width<br /> <br /> (with vacuum / magnet)<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |-<br /> |Minimum Battery Height<br /> |17.75&quot; / 451 mm<br /> |17.75&quot; / 451 mm<br /> |17.75&quot; / 451 mm<br /> |-<br /> |Ground Clearance<br /> |0.63&quot; / 16 mm<br /> |0.63&quot; / 16 mm<br /> |0.63&quot; / 16 mm<br /> |-<br /> |Roller Height<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |-<br /> ! colspan=&quot;4&quot; |NOTES<br /> |-<br /> | colspan=&quot;4&quot; |''Specifications may vary ± 5% because of temperature, floor considerations, and operator efficiency. Values represented under normal operating conditions.''<br /> |-<br /> | colspan=&quot;4&quot; |''* Varies with battery case thickness and condition.''<br /> |}<br /> <br /> === UNITS WITH 20 HP POWER UNIT USED DECEMBER, 2014 TO PRESENT ===<br /> {| class=&quot;wikitable&quot;<br /> !<br /> !BE-24-2-TS<br /> !BE-36-2-TS<br /> !BE-42-2-TS<br /> |-<br /> |Travel Speed<br /> |0 to 240 ft/min / 0 to 1.22 m/s<br /> |0 to 240 ft/min / 0 to 1.22 m/s<br /> |0 to 240 ft/min / 0 to 1.22 m/s<br /> |-<br /> |Raise - Lower Speed<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |-<br /> |Powered Roller Speed<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |-<br /> |Arm Traverse Speed<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |-<br /> |Arm Rotation Time<br /> |6 s to 8 s<br /> |6 s to 8 s<br /> |6 s to 8 s<br /> |-<br /> |Draw Bar Pull / Vacuum<br /> <br /> (12&quot; / 305 mm Round Cup)<br /> |1,000 lb / 454 kg<br /> |1,000 lb / 454 kg<br /> |1,000 lb / 454 kg<br /> |-<br /> |Draw Bar Pull Magnet*<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |-<br /> |Vacuum Attach Time<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |-<br /> |Vacuum Release Time<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |-<br /> |Input Voltage<br /> |480 V / 3 ph / 60Hz<br /> |480 V / 3 ph / 60Hz<br /> |480 V / 3 ph / 60Hz<br /> |-<br /> |AC Current Draw<br /> |35 A<br /> |35 A<br /> |35 A<br /> |-<br /> |AC Current Draw w/ Electric Drive Option<br /> |42 A<br /> |42 A<br /> |42 A<br /> |-<br /> |Control Circuit Voltage<br /> |120 V ac<br /> |120 V ac<br /> |120 V ac<br /> |-<br /> |Hydraulic Power Unit<br /> |20 hp / 14.9 kW<br /> |20 hp / 14.9 kW<br /> |20 hp / 14.9 kW<br /> |-<br /> |Hydraulic Power Unit w/ Electric Drive Option<br /> |25 hp / 18.7 kW<br /> |25 hp / 18.7 kW<br /> |25 hp / 18.7 kW<br /> |-<br /> |Hydraulic Pump<br /> |22 gal/min / 83 L/min<br /> |22 gal/min / 83 L/min<br /> |22 gal/min / 83 L/min<br /> |-<br /> |Power Unit<br /> |Hydraulic, Variable Displacement<br /> |Hydraulic, Variable Displacement<br /> |Hydraulic, Variable Displacement<br /> |-<br /> |Operating Pressure<br /> |1,500 psi / 103 bar<br /> |1,500 psi / 103 bar<br /> |1,500 psi / 103 bar<br /> |-<br /> |Vacuum Pump<br /> |1/3 hp / 0.25 kW<br /> |1/3 hp / 0.25 kW<br /> |1/3 hp / 0.25 kW<br /> |-<br /> |Vacuum<br /> |21&quot; Hg / 711 mbar<br /> |21&quot; Hg / 711 mbar<br /> |21&quot; Hg / 711 mbar<br /> |-<br /> |Full Load Capacity<br /> |10,000 lb / 4535 kg<br /> |10,000 lb / 4535 kg<br /> |10,000 lb / 4535 kg<br /> |-<br /> |Weight (Empty)<br /> |8,000 lb / 3629 kg<br /> |8,300 lb / 3765 kg<br /> |8,600 lb / 3901 kg<br /> |-<br /> |Total Compartment Rollers / Powered<br /> |11/5<br /> |11/5<br /> |11/5<br /> |-<br /> |Guide Track<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |-<br /> |Overall Dimensions (L x W x H)<br /> |156.5&quot; x 72&quot; x 158.188&quot;<br /> <br /> 3975 mm x 1829 mm x 4018 mm<br /> |180.5&quot; x 72&quot; x 158.188&quot;<br /> <br /> 4585 mm x 1829 mm x 4018 mm<br /> |192.5&quot; x 72&quot; x 160.688&quot;<br /> <br /> 4890 mm x 1829 mm x 4081 mm<br /> |-<br /> |Vacuum Arm Reach<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |-<br /> |Vacuum Arm Reach (Hydraulic Extension)<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |-<br /> |Magnet Arm Reach (Hydraulic Extension) Truck Side<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |-<br /> |Wheel Base<br /> |98&quot; / 2489 mm<br /> |122&quot; / 3099 mm<br /> |134&quot; / 3404 mm<br /> |-<br /> |Drive Wheel Center Line<br /> |51&quot; / 1295 mm<br /> |51&quot; / 1295 mm<br /> |51&quot; / 1295 mm<br /> |-<br /> |Battery Compartment Width<br /> |24&quot; / 610 mm<br /> |36&quot; / 915 mm<br /> |42&quot; / 1067 mm<br /> |-<br /> |Maximum Battery Dimensions<br /> <br /> (L x W x H)<br /> |48&quot; x 23&quot; x 34&quot;<br /> <br /> 1219 mm x 584 mm x 864 mm<br /> |48&quot; x 35&quot; x 34&quot;<br /> <br /> 1219 mm x 889 mm x 864 mm<br /> |48&quot; x 41&quot; x 34&quot;<br /> <br /> 1219 mm x 1041 mm x 864 mm<br /> |-<br /> |Minimum Battery Width<br /> <br /> (with vacuum / magnet)<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |-<br /> |Minimum Battery Height<br /> |17.75&quot; / 451 mm<br /> |17.75&quot; / 451 mm<br /> |17.75&quot; / 451 mm<br /> |-<br /> |Ground Clearance<br /> |0.63&quot; / 16 mm<br /> |0.63&quot; / 16 mm<br /> |0.63&quot; / 16 mm<br /> |-<br /> |Roller Height<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |-<br /> ! colspan=&quot;4&quot; |NOTES<br /> |-<br /> | colspan=&quot;4&quot; |''Specifications may vary ± 5% because of temperature, floor considerations, and operator efficiency. Values represented under normal operating conditions.''<br /> |-<br /> | colspan=&quot;4&quot; |''* Varies with battery case thickness and condition.''<br /> |}<br /> ==&lt;big&gt;Pre-Installation Check&lt;/big&gt;==<br /> ===&lt;big&gt;&lt;u&gt;Floor Conditions&lt;/u&gt;&lt;/big&gt;===<br /> The floor is the single most critical area of the battery room.  A bad floor can cause significant issues with the installation as well as downtime and maintenance problems with the extractor.  The floor should be verified as to its minimum thickness and strength with user.  As noted on the drawing, the specific requirement of flatness for your particular type of system is listed. Below is a chart stating floor requirements.  If possible, especially on double stack and higher systems, a digital level should be used to shoot the grade for compliance with the specification.  The floor should also be inspected for severe cracks or excessively wide expansion joints in the travel path of the machine.  If floor drains are present, they must not have a grade to the opening that encroaches into the travel path. <br /> <br /> F-min is a rating method used to evaluate the flatness and levelness of a floor designated as &quot;defined travel path&quot;.  For example, an F-min rating of 60 means that there is no more than .129&quot; of variation in the transverse axis (wheels left to right) and .287&quot; variation in the longitudinal axis (front to back) on the equipment.<br /> <br /> To avoid potential damage to drive wheel assemblies, guide track, structural components, guide rollers  and issues with the inner frame equalization the &quot;defined travel path&quot; of the Battery Extractor should meet or exceed the recommended F-min specification. See chart below for the model specifications.<br /> {| class=&quot;wikitable&quot;<br /> !Model<br /> !F-Min<br /> !+/- Longitudinal<br /> !+/- Transverse<br /> !Slope Defect<br /> |-<br /> |SL, DS<br /> |40<br /> |.287&quot;<br /> |.192&quot;<br /> |.096&quot;<br /> |-<br /> |TS<br /> |60<br /> |.186&quot;<br /> |.129&quot;<br /> |.066&quot;<br /> |-<br /> |QS<br /> |85<br /> |.131&quot;<br /> |.091&quot;<br /> |.047&quot;<br /> |}[[File:IOP-400 BE-SL&amp;DS (10-23) Floor Conditions Pre-Installation Check.png|alt=BE-TS Floor Conditions Pre-Installation Check|frameless|500x500px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Floor_Conditions_Pre-Installation_Check.png]]<br /> ==&lt;big&gt;Operating Controls &amp; Instructions&lt;/big&gt;==<br /> <br /> === &lt;big&gt;&lt;u&gt;Operator Console&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Operator Console.png|alt=BE-TS Operator Console|frameless|1080x1080px]]<br /> <br /> '''''NOTE:''' Safety devices for the machine and the machine operating area SHALL NOT be rendered inoperable or misused.'' <br /> <br /> ''Typical BE-TS operator console shown above. Position of optional controls may vary from that shown depending on age of unit and/or combination of optional controls present.''<br /> <br /> ''HMI display standard on units shipped after February, 2020 for Industrial Internet of Things (IIoT) package.''<br /> <br /> ==== &lt;u&gt;&lt;big&gt;Safety Features&lt;/big&gt;&lt;/u&gt; ====<br /> &lt;u&gt;Key Switch&lt;/u&gt; – Located on the dash (see above).  Primary on/off switch to prevent unauthorized personnel from operating the BE.<br /> <br /> &lt;u&gt;Emergency Stop&lt;/u&gt; – Located on the dash (see above). Will stop all functions immediately, locking all hydraulics in place. To use, press down on the red button. The machine key must be used to reset the emergency stop.<br /> <br /> &lt;u&gt;Foot Switch&lt;/u&gt; – Must be depressed to operate the BE.  Stepping off the foot switch will stop all functions immediately, locking all hydraulics in place.  To resume use, depress the foot switch.<br /> <br /> &lt;u&gt;Gate Switch&lt;/u&gt; – The gate must be fully closed for the BE to operate.<br /> <br /> &lt;u&gt;Extractor Arm Switch&lt;/u&gt; – Does not permit the machine to move forward or backward unless the extractor arm is located in the center of the carriage between the indicating arrows located on the arm guard.<br /> <br /> &lt;u&gt;Powered Roller Cutout (PRC-1 or PRC-2) ''(if equipped)''&lt;/u&gt; – Disengages the powered roller function when the photo eye positioned on the edge of the BE battery compartment is disrupted by a battery, requiring additional input from the operator. Pressing the &quot;Power Roller Cutout&quot; override button (see above) on the dash will resume  powered roller operation when loading or unloading batteries from the BE carriage.<br /> <br /> &lt;u&gt;Horn ''(If equipped)''&lt;/u&gt; – Button located on the dash (see above).  Used to alert personnel before moving the BE.<br /> <br /> &lt;u&gt;Strobe Light ''(If equipped)''&lt;/u&gt; – Located on a vertical stanchion mounted to the right rear of the operator compartment. For units equipped with optional overhead guard (OHG), the beacon is located above of the operator compartment.  Beacon automatically flashes when the BE is switched on to visually notify the BE is in use.<br /> <br /> &lt;u&gt;Audible Alarm ''(if equipped)''&lt;/u&gt; – Mounted in the same location as the Strobe Light.  Automatically sounds when the BE is switched on to notify personnel that the BE is in use.<br /> <br /> &lt;u&gt;Blue Light ''(if equipped)''&lt;/u&gt; - Mounted at an elevated position on either end of the extractor which project a bright, highly concentrated blue beam pattern on the ground visually alerting personnel to the direction the extractor is moving.<br /> <br /> === &lt;big&gt;&lt;u&gt;Operation Overview&lt;/u&gt;&lt;/big&gt; ===<br /> <br /> * All operators should be familiar with the operator console of the extractor before performing any battery changes.  The controls of the console are simple and well marked.  It consists of six, manually operated, hydraulic control valves and a three position selector switch which controls the left and right vacuum cups (or optional magnets).<br /> * The operator shall make certain there are no persons or obstacles in the extractor path prior to traveling forward or reverse.<br /> * All manual valves are moved in the direction of the function travel which it controls with exception of the lift/lower valve, which is pulled toward the operator for &quot;up&quot; and pushed away for &quot;down.&quot;<br /> * In the event of any failure or malfunction, step off the dead-man switch or press the E-stop button and all functions will stop immediately, locking all hydraulics in place.<br /> * The extractor arm must be in the center of the carriage or the unit will not travel forward or reverse.<br /> * To ensure smooth operation, all valve movements should be made in a slow, deliberate motion.<br /> * Only one key should be provided to operate the extractor.<br /> * When leaving the machine, the operator shall turn off the key switch, remove the key and logout out of the IIoT (if equipped) to prevent unauthorized use<br /> * Ensure all the batteries and cables are properly stored in the battery stands prior to moving the BE.<br /> * The BE is designed to carry only one battery in each compartment on the carriage.<br /> * When loading the BE, position the batteries in the center of the compartments on the powered rollers to prevent any battery movement when transporting.<br /> * Ensure there are no projections outside of the carriage before moving the BE.<br /> <br /> === &lt;u&gt;&lt;big&gt;Operating Instructions&lt;/big&gt;&lt;/u&gt; ===<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Pre-Change Out Preparation&lt;/u&gt;&lt;/big&gt; ====<br /> 1. Position lift truck for change out in designated area.<br /> <br /> 2. Remove all battery restraints and disconnect battery cables following manufacturers guidelines.  (Be sure to position battery cables so as not to be damaged by the battery during change out.)<br /> <br /> 3. Board battery extractor and close safety gate.  (Gate must be fully closed or unit will not operate.)<br /> <br /> 4. Turn key switch to &quot;ON&quot; position. <br /> <br /> 5. Log in on the HMI display (if equipped with BE-IIoT package).<br /> <br /> 6. Depress foot pedal.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Discharged Battery Removal&lt;/u&gt;&lt;/big&gt; ====<br /> 1. Move extractor forward or reverse to position center of empty compartment with center of lift truck battery compartment. (Lead roller of extractor is equipped with a centering groove.  Users may find it beneficial to mark center of lift truck compartment to aid in alignment.)<br /> <br /> 2. Align extractor's roller compartment height with lift truck's battery compartment.<br /> <br /> 3. Rotate extractor arm into battery compartment aligned in Step 2.<br /> <br /> 4. Move extractor arm toward battery until vacuum cup/magnet contacts battery.<br /> <br /> [[File:NOTICE-warn.png|alt=NOTICE|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:NOTICE-warn.png]] '''DO NOT force cup/magnet into battery after initial contact with battery is made.'''<br /> <br /> 5. Energize vacuum/magnet by turning selector switch to proper direction, left or right.<br /> <br /> 6. Move extractor arm away from lift truck toward center of extractor roller bed, removing discharged battery.  (Battery should be pulled past first three idler rollers onto first or second powered roller.)<br /> <br /> 7. Turn off vacuum/magnet and move extractor arm away from battery 1&quot; to 2&quot;.<br /> <br /> 8. Rotate extractor arm out of battery compartment into opposite compartment (if empty) and center arm in carriage.<br /> <br /> 9. Move battery into center of compartment using powered rollers.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Charged Battery Retrieval&lt;/u&gt;&lt;/big&gt; ====<br /> 1. Locate charged battery for appropriate type of lift truck being changed.<br /> <br /> 2. Raise battery extractor roller compartment to proper level to gain access as needed to disconnect desired battery from its charger and disengage battery safety stop.<br /> <br /> [[File:WARNING-warn.png|alt=WARNING|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:WARNING-warn.png]] '''ALWAYS be sure charging has been completed and charger is not still charging battery. Dangerous sparking/arcing can occur if battery is unplugged from charger while charging.'''<br /> <br /> 3. Move extractor to appropriate rack position and align empty roller compartment with the center of the battery storage rack compartment.  ''(The battery safety stop of each compartment is the center of that compartment and should be used for alignment with the groove in the lead roller of the battery extractor compartment.'') <br /> <br /> 4. Rotate arm into empty compartment (if not already positioned there.)<br /> <br /> 5. Move extractor arm toward battery until vacuum cup/magnet contacts battery.<br /> <br /> 6. Energize vacuum cup/magnet by turning selector switch to proper direction, left or right.<br /> <br /> [[File:NOTICE-warn.png|alt=NOTICE|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:NOTICE-warn.png]] '''DO NOT force cup/magnet into battery after initial contact with battery is made.'''<br /> <br /> 7. Move extractor arm away from battery rack toward center of extractor roller bed, removing charged battery.  (Battery should be pulled past first three idler rollers onto first or second powered roller.)<br /> <br /> 8. Turn off vacuum/magnet and move extractor arm away from battery 1&quot; to 2&quot;.<br /> <br /> 9. Rotate extractor arm out of battery compartment into fully vertical position.<br /> <br /> 10. Move battery into center of compartment using powered rollers.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Discharged Battery Return&lt;/u&gt;&lt;/big&gt; ====<br /> 1. If required, adjust extractor compartment height to battery rack level with open battery compartment.  Drive extractor to align roller compartment containing discharged battery with open battery compartment.<br /> <br /> 2. Return discharged battery to battery rack using powered rollers.<br /> <br /> '''''NOTE:''''' ''In most instances, batteries can be deposited into battery racks in one motion using only powered rollers.  When this does not work, the battery may need slight assistance from extractor arm.  To do this, rotate arm into compartment such as one would if removing battery from rack.  If extractor is vacuum equipped, position top edge of cup slightly higher than edge of battery (or over lifting eye if so equipped) to prevent cup from adhering to battery - No vacuum/magnet is necessary for pushing. DO NOT activate vacuum/magnet switch.  Slowly push battery into rack until fully into compartment.''<br /> <br /> 3. Engage battery safety stop and connect battery to charger as required.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Charged Battery Installation&lt;/u&gt;&lt;/big&gt; ====<br /> 1. Lower extractor to fully lowered position.<br /> <br /> 2. Drive extractor back to lift truck and align roller compartment containing charged battery as performed in steps 1 and 2 of &quot;Discharged Battery Removal&quot;.<br /> <br /> 3. Move charged battery toward lift truck compartment by using powered rollers, verifying precise battery alignment.<br /> <br /> [[File:NOTICE-warn.png|alt=NOTICE|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:NOTICE-warn.png]] '''Many batteries are a tight fit into lift truck battery compartments. Care MUST be taken to ensure alignment is precise to avoid damage to battery, lift truck, and/or battery extractor.'''<br /> <br /> 4. Adjust extractor vertically as well as horizontally, if needed<br /> <br /> 5. Insert battery into lift truck as far as possible using only the powered rollers.<br /> <br /> 6. Rotate extractor arm into compartment and SLOWLY push battery into lift truck.  (Be sure to watch battery cables for interference.)<br /> <br /> 7. Return extractor arm to center of roller bed and lower extractor to fully lowered position.  Drive extractor out of immediate area.<br /> <br /> 8. Turn off key switch, remove key from switch, log out on the HMI display (if equipped with BE-IIoT package) and carefully exit extractor.<br /> <br /> 9. Secure newly installed battery in lift truck and reconnect battery cables.<br /> <br /> 10. Return lift truck to service<br /> {|<br /> ![[File:Caution-Warning.png|alt=CAUTION|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:Caution-Warning.png]]<br /> |'''DO NOT drive the BE into the travel path end stops. The end stops are designed to prevent the BE from accidentally traveling beyond its designated travel path. Driving the BE into the end stops will cause the BE to stop suddenly, possibly causing damage to the end stop, the BE and/or personal injury.'''<br /> |}<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Optional Powered Roller Cutout Operation&lt;/u&gt;&lt;/big&gt; ====<br /> Units equipped with optional Powered Roller Cutout, the powered roller override button must be depressed in addition to actuating the hydraulic valve when a battery disrupts the photo eye(s) at the edge of the battery compartments while using the powered rollers to transfer batteries on and off of the battery extractor.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;IIoT Equipped Units&lt;/u&gt;&lt;/big&gt; ====<br /> Units shipped after February, 2020 are equipped with BE-IIoT (Industrial Internet of Things) package. Operators must log in to the BE-IIoT system using the HMI (Human Machine Interface) display located on the dashboard to operate the extractor.<br /> <br /> When finished operating the extractor, the operator should log out of the BE-IIoT to prevent unauthorized access and/or operation of the extractor.<br /> <br /> == &lt;big&gt;Manual Unloading&lt;/big&gt; ==<br /> '''Lockout/tagout and de-energize all equipment prior to manually unloading any battery.'''<br /> <br /> In the event of power loss or an operational malfunction of the BE not allowing a battery to be unloaded using normal operating procedures, it is recommended a battery be removed from the BE using certified and approved vertical extraction methods and devices.<br /> {|<br /> |[[File:DANGER-warn.png|alt=DANGER|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:DANGER-warn.png]]<br /> |'''Read, understand and observe all safety warnings and procedures related to the vertical extraction device(s) being used.'''<br /> |}<br /> Should the status of the BE not allow for safe vertical extraction (due to position in the battery aisle or level of the inner carriage), only repairs required to safely maneuver the BE to a position allowing for safe vertical extraction should be made.  Once any batteries are safely unloaded, any remaining repairs can be made.<br /> {|<br /> |[[File:DANGER-warn.png|alt=DANGER|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:DANGER-warn.png]]<br /> |'''Extreme care should be taken when working under or around equipment supporting elevated loads. Unexpected movement of the equipment could cause the load and/or equipment to fall. ALWAYS be sure devices of adequate size and strength are in place to prevent any personnel working under the elevated load from being crushed. Serious personal injury or death will occur.'''<br /> |}<br /> <br /> == &lt;big&gt;Spare Parts List&lt;/big&gt; ==<br /> Use only BHS approved replacement parts.<br /> <br /> Refer to the appropriate Spare Parts Kit (vacuum equipped units - Pt# BE-SPKV-TS, magnet equipped units - Pt# BE-SPKM-TS) for the list of items recommended by BHS to have on hand for BE-TS models to minimize any downtime due to minor breakdowns that may occur under normal operating conditions.<br /> <br /> BHS offers many replacement parts kits containing relevant or related parts when replacing certain individual parts or replacing any obsolete / upgraded parts.<br /> <br /> BHS also offers a supplement hose kit (Pt# 80342003) which contains an assortment of hoses allowing any hose on the extractor to be replaced immediately with a temporary hose of equal length or longer. After the extractor is back up and running, the failed hose can be taken to have an exact replacement made. Once the new hose is made and installed, the temporary hose can be returned to the kit for future use.<br /> <br /> Go to [[www.bhs1.com]] and click &quot;Parts&quot; for all the latest parts kits and corresponding installation instructions (if applicable).<br /> <br /> BHS recommends that a full maintenance inspection report similar to the one provided be done at least once a month.<br /> <br /> Any parts found to be excessively worn or damaged should promptly be replaced unless said parts pose a safety risk to the operator and/or extractor, in which case the unit should be removed from service until the problem(s) are remedied (See<br /> <br /> Operator's Daily Checklist.)<br /> <br /> ''Note: Spare parts kits contain parts for the most current machine design/configuration. Due to continuous design and manufacturing updates and improvements, not all the parts in the spare parts kits may be compatible with older units. Consult factory when ordering spare or replacement parts for existing units in the field to ensure part compatibility.''<br /> <br /> = &lt;big&gt;Parts Sections&lt;/big&gt; =<br /> <br /> == &lt;big&gt;Chassis&lt;/big&gt; ==<br /> <br /> === &lt;big&gt;&lt;u&gt;Equalization Components&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Equalization Components.png|alt=BE-TS Chassis Equalization|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PT0222-1<br /> |LINK-CONNECTING-#60<br /> |<br /> |<br /> |8<br /> |-<br /> |2<br /> |HW0017<br /> |NUT-HEX-3/4-10<br /> |<br /> |<br /> |8<br /> |-<br /> |3<br /> |HW0115<br /> |WASHER-LOCK-3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |43097001<br /> |STUD-ANCHOR-5&quot;<br /> |<br /> |''Upper''<br /> |4<br /> |-<br /> |5<br /> |HW0020<br /> |NUT-JAM-3/4-10<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43097002<br /> |STUD-ANCHOR-2&quot;<br /> |<br /> |''Lower''<br /> |4<br /> |-<br /> |7<br /> |00158001-14<br /> |CHAIN-ROLLER-#60<br /> |<br /> |<br /> |4<br /> |}<br /> [[File:BE-TS Equalization Components - 1.0.2.png|alt=BE-TS Chassis Equalization 2|frameless|575x575px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PT0416<br /> |COLLAR-SHAFT-1 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |2<br /> |43097006<br /> |KEY-3/8&quot; X 2 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |PT0224<br /> |SPROCKET-60B12 X 1 1/2&quot;<br /> |<br /> |''Keyed in line''<br /> |8<br /> |-<br /> |4<br /> |PT0405<br /> |FLANGE BEARING-2 BOLT-1 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1 1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |6<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> | rowspan=&quot;4&quot; |7<br /> |43127001<br /> |SHAFT-EQUALIZATION-81.75&quot;<br /> |<br /> |''BE-24-2-TS''<br /> |2<br /> |-<br /> |43327001<br /> |SHAFT-EQUALIZATION-105.75&quot;<br /> |<br /> |''BE-36-2-TS''<br /> |2<br /> |-<br /> |44327001<br /> |SHAFT-EQUALIZATION-117.75&quot;<br /> |<br /> |''BE-42-2-TS''<br /> |2<br /> |-<br /> |44527001<br /> |SHAFT-EQUALIZATION-75.75&quot;<br /> |<br /> |''BE-42-1-TS''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |8<br /> |PT0503<br /> |BEARING-FLANGED LOAD-2 1/4&quot;<br /> |<br /> |''Used after December 2003''<br /> |8<br /> |-<br /> |43026001<br /> |BEARING-FLANGED LOAD-2 1/4&quot; ''(MACHINED)''<br /> |<br /> |''Used prior to December 2003''<br /> |8<br /> |-<br /> |9<br /> |HW0025<br /> |NUT-JAM-7/8-14<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0117<br /> |WASHER-LOCK-7/8&quot; ''(NOT SHOWN)''<br /> |<br /> |''Used prior to August 2002''<br /> |8<br /> |}<br /> <br /> === &lt;u&gt;'''&lt;big&gt;Bridge &amp; Cross Bar&lt;/big&gt;'''&lt;/u&gt; ===<br /> [[File:BE-TS Bridge and Cross Bar.png|alt=BE-TS Bridge and Cross Bar|frameless|524x524px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1 1/4&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |2<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |20<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |20<br /> |-<br /> |4<br /> |HW0515<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |''Fully Threaded''<br /> |8<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> === &lt;u&gt;'''&lt;big&gt;Lift Cylinder Connections&lt;/big&gt;'''&lt;/u&gt; ===<br /> [[File:BE-TS Lift Cylinder Connections.png|alt=BE-TS Lift Cylinder Connections|frameless|589x589px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |00158001-13<br /> |CHAIN-ROLLER-#80<br /> |<br /> |<br /> |4<br /> |-<br /> |2<br /> |HW0014<br /> |NUT-HEX-1-8<br /> |<br /> |<br /> |8<br /> |-<br /> |3<br /> |43897002<br /> |STUD-LIFT-INNER FRAME<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |PT0204<br /> |LINK-CONNECTING-#80<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |43897001<br /> |STUD-LIFT-OUTER FRAME<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43815018<br /> |BRACKET-CYLINDER SUPPORT<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |SS0761<br /> |U-BOLT-CYLINDER MOUNTING<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |12<br /> |-<br /> |9<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |10<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |8<br /> |-<br /> | rowspan=&quot;2&quot; |11<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |<br /> |''Idler caster end of unit'' <br /> |2<br /> |-<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |''Drive wheel end of unit'' <br /> |2<br /> |-<br /> |12<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |14<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |43822002<br /> |CLEVIS ASSEMBLY<br /> |<br /> |''Sold as assembly only''<br /> |4<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Guidance Arm&lt;/big&gt;&lt;/u&gt;''' ===<br /> [[File:BE-TS Guidance Arm.png|alt=BE-TS Guidance Arm|frameless|562x562px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> ! colspan=&quot;2&quot; |NO. REQ<br /> |-<br /> |1<br /> |43015011<br /> |GUIDE ARM WELDMENT, 2 ROLLER<br /> |<br /> |<br /> |2<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |2<br /> |43017025<br /> |SPACER-GUIDE ARM<br /> |<br /> |''† 1/2&quot; thick''<br /> |4<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |3<br /> |41215204<br /> |GUIDE ARM WELDMENT, 4 ROLLER<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |2<br /> |-<br /> |4<br /> |41217274<br /> |SPACER-GUIDE ARM<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |4<br /> |-<br /> |5<br /> |43012007<br /> |CAM ROLLER-1 3/4&quot;<br /> |<br /> |<br /> |4<br /> |8<br /> |-<br /> |6<br /> |HW0115<br /> |WASHER-LOCK-3/4&quot;<br /> |<br /> |<br /> |4<br /> |8<br /> |-<br /> |7<br /> |HW0011<br /> |NUT-HEX-3/4-16<br /> |<br /> |<br /> |4<br /> |8<br /> |-<br /> |8<br /> |HW0509<br /> |BOLT-HHCS-1/2-13 X 4-1/2&quot;<br /> |<br /> |<br /> |4<br /> |6<br /> |-<br /> |9<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |6<br /> |-<br /> |10<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |4<br /> |6<br /> |-<br /> |11<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |4<br /> |6<br /> |-<br /> |12<br /> |41215234<br /> |GUIDE ARM WELDMENT (POLY)<br /> |<br /> |<br /> |2<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |13<br /> |41217317<br /> |POLY SLIDE MOUNTING BLOCK<br /> |<br /> |<br /> |4<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |14<br /> |41217318<br /> |POLY SLIDE<br /> |<br /> |<br /> |4<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |15<br /> |HW0501<br /> |BOLT-HHCS-1/2-13 X 1&quot;<br /> |<br /> |<br /> |12<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |16<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |12<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |17<br /> |91253A546<br /> |BOLT FHSCS-1/4-20 X 1-1/2&quot;<br /> |<br /> |<br /> |8<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |18<br /> |HW0003<br /> |NUT-NILN-1/4-20<br /> |<br /> |<br /> |8<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> ! colspan=&quot;7&quot; |NOTES<br /> |-<br /> | colspan=&quot;7&quot; |''† Older units equipped with (1) 1&quot; thick spacer per guide arm bracket.'' <br /> |-<br /> | colspan=&quot;7&quot; |''†† Multiple styles of guide arms have been utilized on extractors. Refer to the parts diagrams for correct replacement parts.'' <br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Roller Bed Componenets&lt;/big&gt;&lt;/u&gt;''' ===<br /> ==== '''&lt;big&gt;''Idler Rollers''&lt;/big&gt;''' ====<br /> [[File:BE-TS Idler Rollers.png|alt=BE-TS Idler Rollers|frameless|746x746px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;3&quot; |1<br /> |43182001<br /> |LEAD ROLLER ASSEMBLY-24&quot;<br /> |<br /> |''With alignment groove''<br /> |4<br /> |-<br /> |43382001<br /> |LEAD ROLLER ASSEMBLY-36&quot;<br /> |<br /> |''With alignment groove''<br /> |4<br /> |-<br /> |43482001<br /> |LEAD ROLLER ASSEMBLY-42&quot;<br /> |<br /> |''With alignment groove''<br /> |4<br /> |-<br /> | rowspan=&quot;3&quot; |2<br /> |43182002<br /> |IDLER ROLLER ASSEMBLY-24&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |43382002<br /> |IDLER ROLLER ASSEMBLY-36&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |43482002<br /> |IDLER ROLLER ASSEMBLY-42&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> | rowspan=&quot;3&quot; |3<br /> |43187002<br /> |SHAFT-HEX-.75&quot; X 25.75&quot;<br /> |<br /> |''24&quot; compartments''<br /> |8<br /> |-<br /> |43387002<br /> |SHAFT-HEX-.75&quot; X 37.75&quot;<br /> |<br /> |''36&quot; compartments''<br /> |8<br /> |-<br /> |43487002<br /> |SHAFT-HEX-.75&quot; X 43.75&quot;<br /> |<br /> |''42&quot; compartments''<br /> |8<br /> |-<br /> | rowspan=&quot;3&quot; |4<br /> |43187003<br /> |SHAFT-HEX-.75&quot; X 27.5&quot;<br /> |<br /> |''24&quot; compartments''<br /> |4<br /> |-<br /> |43387003<br /> |SHAFT-HEX-.75&quot; X 39.5&quot;<br /> |<br /> |''36&quot; compartments''<br /> |4<br /> |-<br /> |43487003<br /> |SHAFT-HEX-.75&quot; X 45.5&quot;<br /> |<br /> |''42&quot; compartments''<br /> |4<br /> |-<br /> |5<br /> |HW1058<br /> |PIN-HITCH<br /> |<br /> |<br /> |24<br /> |}<br /> '''&lt;big&gt;''Powered Rollers''&lt;/big&gt;'''<br /> <br /> [[File:BE-TS Powered Rollers.png|alt=BE-TS Powered Rollers|frameless|546x546px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;3&quot; |1<br /> |43182003<br /> |POWERED ROLLER-24&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |43382003<br /> |POWERED ROLLER-36&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |43485003<br /> |POWERED ROLLER-42&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |2<br /> |43087001<br /> |JOURNAL-POWERED ROLLER<br /> |<br /> |<br /> |10<br /> |-<br /> |3<br /> |PT0404<br /> |FLANGE BEARING-3-BOLT-1&quot;<br /> |<br /> |<br /> |20<br /> |-<br /> |4<br /> |HW0321<br /> |BOLT-HHCS-5/16-18 X 1 1/4&quot;<br /> |<br /> |<br /> |60<br /> |-<br /> |5<br /> |HW0105<br /> |WASHER-LOCK-5/16&quot;<br /> |<br /> |<br /> |60<br /> |-<br /> |6<br /> |HW0004<br /> |NUT-HEX-5/16-18<br /> |<br /> |<br /> |60<br /> |-<br /> |7<br /> |PT0033<br /> |SPROCKET-35B18 X 1&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |8<br /> |00197028<br /> |KEY-1/4&quot; X 1 1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |00158001-16<br /> |CHAIN-ROLLER-#35<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |PT0031<br /> |LINK-CONNECTING-#35<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |PT0418<br /> |COLLAR-SHAFT-1&quot;<br /> |<br /> |<br /> |10<br /> |}<br /> [[File:BE-TS Powered Rollers Detail A.png|alt=BE-TS Powered Rollers Detail A|frameless|542x542px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0120<br /> |MOTOR-HYDRAULIC-160CC<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW1071<br /> |KEY-WOODRUFF-#808 STD<br /> |<br /> |''Supplied with Item 1''<br /> |A/R<br /> |-<br /> |3<br /> |H1544<br /> |ADAPTER-#6 JICM X #10 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |18<br /> |-<br /> |5<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |18<br /> |-<br /> |6<br /> |43017004<br /> |PLATE-MOTOR MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |PT0302-1<br /> |COUPLING BODY-#40 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |PT0301<br /> |CHAIN-COUPLING-#40<br /> |<br /> |''Includes connecting pin''<br /> |2<br /> |-<br /> |9<br /> |00197026<br /> |KEY-1/4&quot; X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43097003<br /> |KEY-1/4&quot; X 5/8&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Hose Carrier&lt;/big&gt;&lt;/u&gt;''' ===<br /> [[File:BE-TS Hose Carrier.png|alt=BE-TS Hose Carrier|frameless|550x550px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PT0629<br /> |CARRIER TRACK<br /> |<br /> |''81 links required''<br /> |10'<br /> |-<br /> |2<br /> |PT0631<br /> |BRACKET-UPPER MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0212<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0032<br /> |NUT-NILN-#10-24<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |PT0630<br /> |BRACKET-LOWER MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |7<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |43817056-2<br /> |BRACKET-CARRIER TRACK MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |HW0401<br /> |BOLT-HHCS-3/8-16 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |14<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |43817057<br /> |PLATE-CARRIER TRACK SUPPORT<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === &lt;big&gt;'''&lt;u&gt;Cable Retractor&lt;/u&gt;'''&lt;/big&gt; ===<br /> [[File:BE-TS Cable Retractor.png|alt=BE-TS Cable Retractor|frameless|585x585px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |CCR-12HD<br /> |TAKE UP REEL-CARRIER TRACK<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Operator Gate&lt;/big&gt;&lt;/u&gt;''' ===<br /> [[File:BE-TS Discontinued Drop Bar Operator Gate.png|alt=BE-TS Discontinued Drop Bar Operator Gate|frameless|568x568px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43015004<br /> |GATE-OPERATOR<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0407<br /> |BOLT-HHCS-3/8-16 X 2 3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |<br /> |<br /> |1<br /> |}<br /> [[File:BE-TS Operator Gate Continued.png|alt=BE-TS Operator Gate Continued|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43017064-2<br /> |LATCH-SWING GATE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0418<br /> |BOLT-HHCS-3/8-16 X 2 1/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0031<br /> |NUT-LOCK-3/8-16<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |N/A<br /> |HINGE-SPRING<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |5<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |HW1037<br /> |STOP-GATE<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0003<br /> |NUT-NILN-1/4-20<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |N/A<br /> |TORSION SPRING<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |11<br /> |HW0816<br /> |SCREW-HHCS-SELF DRILLING-#10 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |43806001<br /> |ANTI-FATIGUE MAT<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |43017058-2<br /> |THRESHOLD<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |HW0107<br /> |WASHER-LOCK3/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |HW9002<br /> |GAS SPRING<br /> |80292015<br /> |<br /> |1<br /> |-<br /> |19<br /> |43017086-2<br /> |BRACKET-MOUNTING-SPRING<br /> |80292015<br /> |<br /> |2<br /> |-<br /> |20<br /> |HW0815<br /> |SCREW-SELF DRILLING-#12-24 X 1&quot; T-4<br /> |80292015<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Part Discontinued. Spring Hinge and Torsion Spring must be replaced with Gas Spring Kit.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Guarding&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Outer Carriage Guards&lt;/big&gt;''''' ====<br /> <br /> ===== '''''1-Piece Outside Frame Guarding''''' =====<br /> [[File:BE-TS Outside Frame Guard 1-Piece.png|alt=BE-TS Outside Frame Guard 1-Piece|frameless|550x550px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817038<br /> |GUARD-FAR END-TOP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817037<br /> |GUARD-FAR END-MIDDLE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43817035<br /> |GUARD-FAR END-BOTTOM<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |33<br /> |}<br /> <br /> ===== '''''Split Outside Frame Guarding''''' =====<br /> [[File:BE-TS Outside Split Frame Guard.png|alt=BE-TS Outside Split Frame Guard|frameless|562x562px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817103<br /> |GUARD-FAR END-TOP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817102<br /> |GUARD-FAR END-MIDDLE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43817101<br /> |GUARD-FAR END-BOTTOM<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |37<br /> |}<br /> <br /> ==== '''&lt;big&gt;''Inner Carriage Guards''&lt;/big&gt;''' ====<br /> <br /> ===== '''''Inner Carriage Guards (Rotary Actuator)''''' =====<br /> [[File:BE-TS Inner Carriage Guard Rotary.png|alt=BE-TS Inner Carriage Guard (Rotary Actuator Units)|frameless|554x554px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817041-2<br /> |GUARD-FRONT-OPERATOR CONSOLE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817042-2<br /> |GUARD-INNER-FRAME<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |43014006-2<br /> |GUARD-LINEAR DRIVE SCREW<br /> |<br /> |<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |4<br /> |43017010-2<br /> |GUARD-SIDE-ARM CARRIER SHAFT<br /> |<br /> |<br /> |2<br /> |-<br /> |44517002-2<br /> |GUARD-SIDE-ARM CARRIER SHAFT<br /> |<br /> |''† Single compartment units only''<br /> |1<br /> |-<br /> |5<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |34<br /> |-<br /> |6<br /> |43017009-2<br /> |BRACKET-SCREW GUARD MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Single Compartment Guard replaces standard, Far Side Arm Carrier Shaft Guard.'' <br /> |}<br /> '''''Inner Carriage Guards (Helical Actuator)'''''<br /> <br /> [[File:BE-TS Inner Carriage Guard Helical Actuator.png|alt=BE-TS Inner Carriage Guard (Helical Actuator Units)|frameless|547x547px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817041-2<br /> |GUARD-FRONT-OPERATOR CONSOLE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817042-2<br /> |GUARD-INNER-FRAME<br /> |<br /> |<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |3<br /> |43017081-2<br /> |GUARD-SIDE-ARM CARRIER SHAFT<br /> |<br /> |<br /> |2<br /> |-<br /> |44517003-2<br /> |GUARD-SIDE-ARM CARRIER SHAFT<br /> |<br /> |''† Single compartment units only''<br /> |1<br /> |-<br /> |4<br /> |43017080-2<br /> |BRACKET-SIDE GUARD MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |43017082-3<br /> |MOUNT-CHAIN GUARD-LEAD SCREW<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43017082-4<br /> |MOUNT-CHAIN GUARD-LEAD SCREW<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |43017083-2<br /> |GUARD-CHAIN-LEAD SCREW<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0347<br /> |BOLT-BHSCS-1/4-20 X 3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |28<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Single Compartment Guard replaces standard, Far Side Arm Carrier Shaft Guard.'' <br /> |}<br /> <br /> ==== '''&lt;big&gt;''Dash &amp; Platform Guards''&lt;/big&gt;''' ====<br /> [[File:BE-TS Dash &amp; Platform Guards.png|alt=BE-TS Dash &amp; Platform Guards|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41614004-2<br /> |DASHBOARD-OPERATOR CONSOLE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817040<br /> |KICK PLATE-OPERATOR CONSOLE<br /> |<br /> |''41.5&quot; high''<br /> |1<br /> |-<br /> |3<br /> |43817086-2<br /> |DASHBOARD-OPERATOR CONSOLE<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43817088<br /> |KICK PLATE-OPERATOR CONSOLE<br /> |<br /> |''33.5&quot;'' ''high''<br /> |1<br /> |-<br /> |5<br /> |43817110-2<br /> |FRAME-DASHBOARD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |A/R<br /> |PLATE-DASHBOARD<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |7<br /> |HW0060<br /> |NUT-CLIP-#10-24<br /> |<br /> |<br /> |12<br /> |-<br /> |8<br /> |SS0114<br /> |BHSCS-#10-24 X 1/2&quot;-SST<br /> |<br /> |<br /> |12<br /> |-<br /> |9<br /> |PL0602<br /> |VINYL EDGING<br /> |<br /> |''At Foot Switch (Not shown)'' <br /> |1'<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Consult factory''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Lift Cylinder Guards&lt;/big&gt;''''' ====<br /> [[File:BE-TS Lift Cylinder Guards.png|alt=BE-TS Lift Cylinder Guards|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;2&quot; |1<br /> |43815016<br /> |GUARD-CLEVIS<br /> |<br /> |Operator right / Far left<br /> |2<br /> |-<br /> |43815017<br /> |GUARD-CLEVIS<br /> |<br /> |Operator left / Far right<br /> |2<br /> |-<br /> |2<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Labels &amp; Placards&lt;/big&gt;&lt;/u&gt;''' ===<br /> [[File:BE-TS Labels &amp; Placards Chassis.png|alt=BE-TS Labels &amp; Placards Chassis|frameless|546x546px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |00196616<br /> |LABEL-&quot;NO RIDERS ALLOWED&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |00196210<br /> |LABEL-WARNING-&quot;OPERATION BY AUTHORIZED PERSONNEL ONLY&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43696001<br /> |PLACARD-OFF / ON<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43096018<br /> |PLACARD-RACK LEVEL ASSIST<br /> |<br /> |''† If equipped''<br /> |1<br /> |-<br /> |5<br /> |43096015<br /> |PLACARD-PLATFORM RAISE / LOWER<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43096010<br /> |PLACARD-HORN<br /> |<br /> |''† If equipped''<br /> |1<br /> |-<br /> |7<br /> |43096016<br /> |PLACARD-DRIVE / ARM ROTATION<br /> |<br /> |<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |8<br /> |43096012<br /> |PLACARD-VACUUM OFF / ON<br /> |<br /> |''Vacuum units only''<br /> |1<br /> |-<br /> |43096011<br /> |PLACARD-MAGNET OFF / ON<br /> |<br /> |''Magnet units only (Not shown)''<br /> |1<br /> |-<br /> |9<br /> |43096017<br /> |PLACARD-POWERED ROLLER CUTOUT OVERRIDE<br /> |<br /> |''† If equipped''<br /> |1<br /> |-<br /> |10<br /> |43096013<br /> |PLACARD-POWERED ROLLERS / ARM TRAVERSE<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |00196633<br /> |LABEL-NOTICE-&quot;IN LINE VACUUM FILTER...&quot;<br /> |<br /> |''(1) per side (Vacuum units only)''<br /> |2<br /> |-<br /> |12<br /> |SM-1197<br /> |LABEL-ARM POSITION ARROW<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |00196609<br /> |LABEL-NOTICE-&quot;ARM MUST BE POSITIONED BETWEEN ARROWS...&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |00196602<br /> |LABEL-NOTICE-&quot;LUBRICATION POINTS ON UNDERSIDE&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |00196218<br /> |LABEL-WARNING-&quot;ELECTRICAL VOLTAGE HAZARD&quot;<br /> |<br /> |''Magnet units only''<br /> |1<br /> |-<br /> |16<br /> |00196238<br /> |LABEL-WARNING-&quot;STRONG MAGNETIC<br /> <br /> FIELD/DO NOT USE WITH PACEMAKER&quot;<br /> |<br /> |''†† Magnet units only''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Rack Level Assist (LAI), Horn and Powered Roller Cutout (PRC) are optional features. Not all units are equipped with these options.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Pacemaker Warning Label takes the place of the discontinued, Triangular Magnetic Field Label.''<br /> |}<br /> [[File:BE-TS Labels &amp; Placards Frame.png|alt=BE-TS Labels &amp; Placards Frame|frameless|549x549px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |00196004<br /> |LABEL-CAUTION-&quot;WATCH FOR BATTERY AND CHARGER CABLES IN TRAVEL PATH&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |00196216<br /> |LABEL-WARNING-&quot;CHAIN ENTANGLEMENT<br /> <br /> HAZARD&quot;<br /> |<br /> |''(1) per Clevis Guard'' <br /> |4<br /> |-<br /> |3<br /> |00196622<br /> |LABEL-LIFT POINT<br /> |<br /> |''(2) each end''<br /> |4<br /> |-<br /> |4<br /> |00196700<br /> |DECAL-BHS-24&quot; X 7.875&quot;<br /> |<br /> |''Far end (Not shown)''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |5<br /> |00196630<br /> |LABEL-NOTICE-HYD. OIL SPEC. (AW 68)<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |00196645<br /> |LABEL-NOTICE-HYD. OIL SPEC. (AW 32)<br /> |<br /> |''† See notes'' <br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |† Most units shipped prior to December 2014 require AW 68 Hydraulic Oil. Some units shipped prior to December 2014 shipped with AW 32 for low temperature applications.<br /> |}<br /> <br /> == &lt;big&gt;Extractor Arm&lt;/big&gt; ==<br /> {| class=&quot;wikitable&quot;<br /> !SYMBOL<br /> !DESCRIPTION / NOTICE<br /> !ACTUATOR DIAGRAM<br /> |-<br /> |[[File:IOP-400 BE-SL&amp;DS (10-23) Rotary Actuator Symbol.png|alt=Rotary Actuator Symbol|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Rotary_Actuator_Symbol.png]]<br /> |<br /> ==='''&lt;u&gt;&lt;big&gt;Rotary Actuator Symbol&lt;/big&gt;&lt;/u&gt;'''===<br /> Battery Extractors shipped prior to May 2020 are equipped with Rotary Actuator Extractor Arms. Parts Diagrams Specific to the Rotary Actuator design are indicated with the Rotary Actuator symbol.<br /> |[[File:IOP-400 BE-SL&amp;DS (10-23) Rotary Actuator Extractor Arm.png|alt=BE-TS Rotary Actuator|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Rotary_Actuator_Extractor_Arm.png]]<br /> |-<br /> |[[File:IOP-400 BE-SL&amp;DS (10-23) Helical Actuator Symbol.png|alt=Helical Actuator Symbol|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Helical_Actuator_Symbol.png]]<br /> |<br /> ===&lt;big&gt;'''&lt;u&gt;Helical Actuator Symbol&lt;/u&gt;'''&lt;/big&gt;===<br /> Battery Extractors shipped from May 2020 to Present are equipped with Helical Actuator Extractor Arms. Parts Diagrams Specific to the Rotary Actuator design are indicated with the Helical Actuator Symbol.<br /> |[[File:IOP-400 BE-SL&amp;DS (10-23) Helical Actuator Extractor Arm.png|alt=BE-TS Helical Actuator|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Helical_Actuator_Extractor_Arm.png]]<br /> |}<br /> ===&lt;big&gt;&lt;u&gt;Vacuum Components &amp; Swing Arms&lt;/u&gt;&lt;/big&gt;===<br /> ====''&lt;big&gt;Vacuum Arms (Rotary Actuator)&lt;/big&gt;''====<br /> [[File:BE-TS Vacuum Arms (Rotary Actuator).png|alt=BE-TS Vacuum Arms (Rotary Actuator)|frameless|619x619px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;2&quot; |1<br /> |N/A<br /> |ARM-PUSH/PULL-30&quot;<br /> |<br /> |''&lt;sup&gt;†&lt;/sup&gt; Discontinued''<br /> |1<br /> |-<br /> |N/A<br /> |ARM-PUSH/PULL-36&quot;<br /> |<br /> |''&lt;sup&gt;†&lt;/sup&gt; Discontinued''<br /> |1<br /> |-<br /> |2<br /> |HW0509<br /> |BOLT-HHCS-1/2-13 X 4 1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |P0505<br /> |BUSHING-RED-#6 NPT X #4 FNPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |P0402<br /> |HOSE BARB-1/4 X #4 MNPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0428<br /> |STUD-VACUUM-3/8-16 X 5&quot;<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |9<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |HW-KIT-2<br /> |<br /> |40<br /> |-<br /> |10<br /> |HW1001<br /> |SPRING-3/8&quot;<br /> |HW-KIT-2<br /> |<br /> |24<br /> |-<br /> |11<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |12<br /> |HW0424<br /> |NUT-JAM-3/8-16<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |REF<br /> |43052006<br /> |ADJUSTABLE PUSH/PULL ARM<br /> |<br /> |''Includes Items 13 through 17''<br /> |1<br /> |-<br /> |13<br /> |43057034<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |43055008<br /> |VACUUM CUP MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''&lt;sup&gt;†&lt;/sup&gt; One-piece Arms no longer available. Must replace with Adjustable Arm.''<br /> |}<br /> <br /> ====&lt;big&gt;''Vacuum Cups''&lt;/big&gt;====<br /> [[File:BE-TS Vacuum Cups.png|alt=Vacuum Cups|frameless|563x563px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;4&quot; |A/R<br /> |00162004<br /> |VACUUM CUP-10&quot; 3-PC (STANDARD)<br /> |<br /> |''&lt;sup&gt;†&lt;/sup&gt; Includes Items 1 through 4''<br /> | rowspan=&quot;4&quot; |A/R<br /> |-<br /> |00162003<br /> |VACUUM CUP-12&quot; 3-PC (STANDARD)<br /> |<br /> |''&lt;sup&gt;†&lt;/sup&gt; Includes Items 4 through 7''<br /> |-<br /> |00162007<br /> |VACUUM CUP-10&quot; 3-PC, REINFORCED<br /> |<br /> |''Includes Items 1,3,4 &amp; 8''<br /> |-<br /> |00162005<br /> |VACUUM CUP-12&quot; 3-PC, REINFORCED<br /> |<br /> |''Includes Items 4,5,7 &amp; 9''<br /> |-<br /> |1<br /> |00164006<br /> |CASTING-10&quot; VACUUM CUP<br /> |<br /> | rowspan=&quot;3&quot; |''10&quot; cup only''<br /> |1<br /> |-<br /> |2<br /> |00164004<br /> |SEAL-RUBBER-10&quot;<br /> |<br /> |1<br /> |-<br /> |3<br /> |00165002<br /> |PLATE-FRONT-10&quot;<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0311<br /> |BOLT-FHSCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |00166001<br /> |CASTING-12&quot; VACUUM CUP<br /> |<br /> | rowspan=&quot;3&quot; |''12&quot; cup only''<br /> |1<br /> |-<br /> |6<br /> |00164001<br /> |SEAL-RUBBER-12&quot;<br /> |<br /> |1<br /> |-<br /> |7<br /> |00165001<br /> |PLATE-FRONT-12&quot;<br /> |<br /> |1<br /> |-<br /> |8<br /> |00164007<br /> |SEAL-RUBBER-10&quot;-REINFORCED<br /> |<br /> |<br /> |A/R<br /> |-<br /> |9<br /> |00167003<br /> |SEAL-RUBBER-12&quot;-REINFORCED<br /> |<br /> |<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''&lt;sup&gt;†&lt;/sup&gt; 10&quot; and 12&quot; 1-Piece Cups no longer available. Must replace with 3-Piece Cup. Verify required cup size prior to ordering.''<br /> |}<br /> <br /> ====&lt;big&gt;''Swing Arms (Rotary Actuator)''&lt;/big&gt;====<br /> [[File:BE-TS Swing Arms (Rotary Actuator).png|alt=BE-TS Swing Arms (Rotary Actuator)|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> |ITEM<br /> |BHS PART NUMBER<br /> |DESCRIPTION<br /> |REF. KIT NO.<br /> |NOTES<br /> |NO. REQ<br /> |-<br /> | rowspan=&quot;3&quot; |1<br /> |45055001<br /> |TIE PLATE-SWING ARM<br /> |<br /> |BE-24-2-TS<br /> |1<br /> |-<br /> |45255001<br /> |TIE PLATE-SWING ARM<br /> |<br /> |BE-36-2-TS (NOT SHOWN)<br /> |1<br /> |-<br /> |45355001<br /> |TIE PLATE-SWING ARM<br /> |<br /> |BE-42-2-TS (NOT SHOWN)<br /> |1<br /> |-<br /> |2<br /> |43055004<br /> |SWING ARM-RHS<br /> |†<br /> |NOT SOLD INDIVIDUALLY<br /> |1<br /> |-<br /> |3<br /> |43055002<br /> |SWING ARM-LHS<br /> |†<br /> |NOT SOLD INDIVIDUALLY<br /> |1<br /> |-<br /> |4<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0113<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0010<br /> |NUT-JAM-5/8-11<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |PT0413<br /> |COLLAR-SHAFT-3&quot;<br /> |80252001<br /> |<br /> |2<br /> |-<br /> |8<br /> |43027001<br /> |SHAFT-ROTARY ACTUATOR<br /> |80252001<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW1013<br /> |KEY-3/8&quot; X 12&quot;<br /> |80252001<br /> |<br /> |1<br /> |-<br /> |10<br /> |PT0419<br /> |BEARING-SAE 841-2&quot; I.D., 3&quot; OD, 1/8&quot; THICK<br /> |80252001<br /> |<br /> |3<br /> |-<br /> |11<br /> |43052005<br /> |CAP-BEARING<br /> |<br /> |INCLUDES BEARING<br /> |2<br /> |-<br /> |12<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |13<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |14<br /> |43057014<br /> |STANDOFF-WIRE<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |HW0312<br /> |SCREW-SHSS-1/4-20 X 1&quot;-CUP POINT<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |43057003<br /> |CUSHION-SWING ARM<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |43055001<br /> |STOP-SWING ARM<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |20<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |21<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |H1565<br /> |ADAPTER-45 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |23<br /> |H1600<br /> |ADAPTER-90 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |&lt;sup&gt;†&lt;/sup&gt; ''Included in multiple kits.''<br /> |-<br /> | colspan=&quot;6&quot; |See ''Single Compartment Swing Arm Stop for the the Single Compartment Swing Arm Stop.''<br /> |}<br /> <br /> === '''''Vacuum Swing Arm Stop (Rotary Actuator)''''' ===<br /> [[File:BE-TS Single Compartment Swing Arms (Rotary Actuator).png|alt=BE-TS Single Compartment Swing Arms (Rotary Actuator)|frameless|575x575px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |44555001<br /> |STOP-SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43057003<br /> |CUSHION-SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43057008<br /> |SPACER-SWING ARM STOP<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |}<br /> ====''&lt;big&gt;Vacuum Pump (Rotary Actuator)&lt;/big&gt;''====<br /> [[File:BE-TS Vacuum Pumps (Rotary Actuator).png|alt=BE-TS Vacuum Pumps (Rotary Actuator)|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |P0005<br /> |PUMP-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |P0208<br /> |FILTER-HI FLOW<br /> |<br /> |<br /> |3<br /> |-<br /> |3<br /> |P0503<br /> |NIPPLE-#4 NPT-BRASS<br /> |<br /> |<br /> |3<br /> |-<br /> |4<br /> |P0502<br /> |TEE-#4 FNPT-BRASS<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |P0506<br /> |ELBOW-STR-90 DEG-#4 NPT-BRASS<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |P0402<br /> |HOSE BARB-1/4 X #4 NPTM-BRASS<br /> |<br /> |<br /> |6<br /> |-<br /> |7<br /> |P0207<br /> |VALVE-VACUUM RELEASE<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |P0302<br /> |HOSE-VACUUM-1/4&quot; I.D.<br /> |<br /> |''Two 6&quot; pieces''<br /> |1'<br /> |-<br /> |9<br /> |P0302<br /> |HOSE-VACUUM-1/4&quot; I.D.<br /> |<br /> |''Short Arm side''<br /> |1'<br /> |-<br /> |10<br /> |P0302<br /> |HOSE-VACUUM-1/4&quot; I.D.<br /> |<br /> |''Long Arm side''<br /> |2'<br /> |-<br /> |11<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |HW0212<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |E0624<br /> |CONNECTOR-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |15a<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |''Not shown''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |16<br /> |E0501<br /> |CORD-14-4 SW/SOW<br /> |<br /> |''Withtout Ground Connection in Arm''<br /> | rowspan=&quot;2&quot; |15'<br /> |-<br /> |E0514<br /> |CORD-16-5 SW/SOW<br /> |<br /> |<br /> |-<br /> |17<br /> |43057014<br /> |STANDOFF-CABLE<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |HW0206<br /> |SCREW-RHMS-#10-32 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |19<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |20<br /> |43057021<br /> |PLATE-STIFFENER<br /> |†<br /> |<br /> |2<br /> |-<br /> |21<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |†<br /> |<br /> |12<br /> |-<br /> |22<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |†<br /> |<br /> |12<br /> |-<br /> |23<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |†<br /> |<br /> |12<br /> |-<br /> |24<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |†<br /> |''Not shown''<br /> |24<br /> |-<br /> |25<br /> |P0111<br /> |FILTER-VACUUM-INLINE<br /> |<br /> |''Not shown''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |&lt;sup&gt;†&lt;/sup&gt; ''Included in multiple kits.''<br /> |}<br /> ===&lt;u&gt;&lt;big&gt;Rotary Actuator&lt;/big&gt;&lt;/u&gt;===<br /> [[File:BE-TS Rotary Actuator.png|alt=BE-TS Rotary Actuator|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43046001<br /> |ROTARY ACTUATOR<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |80000002<br /> |ROTARY ACTUATOR BASE ASSEMBLY<br /> |<br /> |''Without Actuator''<br /> |1<br /> |-<br /> |2A<br /> |N/A<br /> |VERTICAL CARRIER PLATE-OUTER<br /> |<br /> |''Included with 80000002''<br /> |2<br /> |-<br /> |2B<br /> |N/A<br /> |VERTICAL CARRIER PLATE-INNER<br /> |<br /> |''Included with 80000002''<br /> |1<br /> |-<br /> |2C<br /> |N/A<br /> |CARRIER BASE PLATE<br /> |<br /> |''Included with 80000002''<br /> |1<br /> |-<br /> |3<br /> |HW1070<br /> |PIN-PULL DOWEL-5/8&quot; X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0508<br /> |BOLT-SHCS-1/2-13 X 3/4&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW1045<br /> |PIN-PULL DOWEL-3/8&quot; X 1 1/2&quot;<br /> |<br /> |''Included with 80000002''<br /> |6<br /> |-<br /> |6<br /> |HW0412<br /> |BOLT-SHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |''Included with 80000002''<br /> |12<br /> |-<br /> |7<br /> |H0010<br /> |FITTING-BULKHEAD-3/4-16 X #4 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 NPTM<br /> |<br /> |<br /> |2<br /> |}<br /> ===&lt;u&gt;&lt;big&gt;Carrier Shafts &amp; Bearings ''(Rotary Actuator)''&lt;/big&gt;&lt;/u&gt;===<br /> [[File:BE-TS Rotary Actuator Carrier Shafts.png|alt=BE-TS Carrier Shafts (Rotary Actuator)|frameless|560x560px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43057045<br /> |CARRIER SHAFT-EXTRACTOR ARM<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |2<br /> |43054007<br /> |BEARING-EXTRACTOR ARM CARRIER<br /> |80252002<br /> |''†† See notes''<br /> |4<br /> |-<br /> |3<br /> |HW0412<br /> |BOLT-SHCS-3/8-16 X 1 1/4&quot;<br /> |80252002<br /> |<br /> |16<br /> |-<br /> |4<br /> |PT0413<br /> |COLLAR-SHAFT-3&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |PT0624<br /> |FITTING-ZERK<br /> |80252002<br /> |''Not shown''<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Vacuum_Extended_Reach_(Rotary_Actuator) Vacuum Extended Reach (Rotary Actuator)] section for Extended Reach equipped units.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Carrier_Shafts_&amp;_Bearings Carrier Shafts &amp; Bearings (Helical Actuator)] section for Helical Actuator equipped units.''<br /> |}<br /> <br /> ===&lt;u&gt;&lt;big&gt;Drive Screw Components ''(Rotary Actuator)''&lt;/big&gt;&lt;/u&gt;===<br /> ====''&lt;big&gt;Drive Nut Assembly (Rotary Actuator)&lt;/big&gt;''====<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Drive Nut Assembly Rotary Actuator.png|alt=BE-SL&amp;DS Drive Nut Assembly Rotary Actuator|frameless|537x537px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Drive_Nut_Assembly_Rotary_Actuator.png]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43054006<br /> |DRIVE NUT ASSEMBLY<br /> |80252003<br /> |&lt;sup&gt;''†''&lt;/sup&gt; ''See notes''<br /> |1<br /> |-<br /> |2<br /> |HW0426<br /> |BOLT-SHCS-3/8-16 X 5 1/2&quot;<br /> |80252003<br /> |&lt;sup&gt;''††''&lt;/sup&gt; ''See notes''<br /> |4<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |80252003<br /> |&lt;sup&gt;''††''&lt;/sup&gt; ''See notes''<br /> |4<br /> |-<br /> |4<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |80252003<br /> |&lt;sup&gt;''††''&lt;/sup&gt; ''See notes''<br /> |4<br /> |-<br /> |5<br /> |PT0624<br /> |FITTING-ZERK<br /> |80252003<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''&lt;sup&gt;†&lt;/sup&gt; See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Drive_Nut_Assembly_(Helical_Actuator) Drive Nut Assembly (Helical Actuator)] section for Helical Actuator equipped units.''<br /> |-<br /> | colspan=&quot;6&quot; |''&lt;sup&gt;††&lt;/sup&gt; It is recommended to replace mounting hardware when replacing Drive Nut Assembly.''<br /> |}<br /> ====''&lt;big&gt;Drive Screw&lt;/big&gt;''====<br /> =====''[Current] Drive Screw Assembly (Frame #'s 374 to Present)''=====<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Drive Screw Rotary Current.png|alt=Current BE-SL &amp; BE-DS Drive Screw (Rotary Actuator)|frameless|531x531px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Drive_Screw_Rotary_Current.png]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43024001<br /> |SCREW-LINEAR DRIVE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |PT0119<br /> |SPROCKET-50B15 X 1 3/16&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43097004<br /> |KEY-1/4 X 7/8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |00158001-15<br /> |CHAIN-ROLLER-#50<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |PT0102<br /> |LINK-CONNECTING-#50<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |PT0406<br /> |FLANGE BEARING-4 BOLT-1 3/16&quot;<br /> |<br /> |''Alloy casting''<br /> |2<br /> |-<br /> |7<br /> |HW0503<br /> |BOLT-HHCS-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |PT0107<br /> |SPROCKET-50B15 X 1&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HC0121<br /> |MOTOR-HYDRAULIC-100CC<br /> |<br /> |''SAE 2-Bolt mount''<br /> |1<br /> |-<br /> |11<br /> |H1605<br /> |ADAPTER-90 DEG-#6 JICM X #10 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW1071<br /> |KEY-WOODRUFF-#808 STD<br /> |<br /> |''Supplied with Item 10''<br /> |A/R<br /> |-<br /> |13<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |14<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |15<br /> |43017007<br /> |PLATE-MOUNTING-SCREW DRIVE MOTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |43057019<br /> |PLATE-COVER<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0415<br /> |BOLT-SHCS-3/8-16 X 3/4&quot;<br /> |<br /> |<br /> |8<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> ! colspan=&quot;6&quot; |ITEMS BELOW ARE REQUIRED FOR REPLACING THE LINEAR DRIVE<br /> <br /> SCREW ON UNITS WITH FRAME #'S OF 373 AND EARLIER<br /> |-<br /> ! colspan=&quot;6&quot; |LINEAR DRIVE SCREW UPDATE KIT<br /> |-<br /> |REF<br /> |80252011<br /> |UPGRADE KIT<br /> |<br /> |<br /> |1<br /> |-<br /> |1<br /> |43024001<br /> |SCREW-LINEAR DRIVE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |PT0119<br /> |SPROCKET-50B15 X 1 3/16&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43097004<br /> |KEY-1/4&quot; X 7/8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |PT0406<br /> |FLANGE BEARING-4 BOLT-1 3/16&quot;<br /> |<br /> |''Alloy casting''<br /> |2<br /> |-<br /> |7<br /> |HW0503<br /> |BOLT-HHCS-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |16<br /> |43057019<br /> |PLATE-COVER<br /> |<br /> |<br /> |2<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |43057022<br /> |SHIM-18GA<br /> |<br /> |''May not be required'' - ''(Not shown)''<br /> |2<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |43057018<br /> |TEMPLATE-BEARING MOUNT PATTERN<br /> |<br /> |''(Not shown)''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |43057020<br /> |SPACER PLATE<br /> |<br /> |''(Not shown)''<br /> |2<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |80000015<br /> |INSTRUCTION DETAIL<br /> |<br /> |''(Not shown)''<br /> |REF<br /> |}<br /> <br /> =====''[Discontinued] Drive Screw Assembly (Frame #'s 373 and Earlier)''=====<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Drive Screw (Rotary Actuator) Discontinued.png|alt=Discontinued BE-SL &amp; BE-DS Drive Screw (Rotary Actuator)|frameless|532x532px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Drive_Screw_(Rotary_Actuator)_Discontinued.png]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |SCREW-LINEAR DRIVE (DISCONTINUED)<br /> |<br /> |''See 80252011 Upgrade Kit''<br /> |1<br /> |-<br /> |2<br /> |PT0118<br /> |SPROCKET-50B12 X 1 3/16&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43097004<br /> |KEY-1/4&quot; X 7/8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |00158001-15<br /> |CHAIN-ROLLER-#50<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |PT0102<br /> |LINK-CONNECTING-#50<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43057016<br /> |BLOCK-BEARING RETAINER<br /> |<br /> |<br /> |2<br /> |-<br /> |6a<br /> |PT0414<br /> |RACE-TAPERED ROLLER BEARING<br /> |<br /> |''Included with 43057016''<br /> |2<br /> |-<br /> |7<br /> |PT0623<br /> |SEAL-GREASE<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0416<br /> |BOLT-SHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |PT0415<br /> |BEARING-TAPERED ROLLER<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW1050<br /> |NUT-LOCK<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |43057017<br /> |PLATE-COVER<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0415<br /> |BOLT-SHCS-3/8-16 X 3/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |13<br /> |PT0624<br /> |FITTING-ZERK<br /> |<br /> |<br /> |2<br /> |}<br /> ===&lt;big&gt;&lt;u&gt;Hose Carrier Plate&lt;/u&gt;&lt;/big&gt;===<br /> [[File:BE-TS Hose Carrier Plate.png|alt=BE-TS Hose Carrier Plate|frameless|554x554px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43915018<br /> |PLATE-HOSE CARRIER<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |PT0618<br /> |BRACKET-FIXED END<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |PT0617<br /> |HOSE CARRIER<br /> |<br /> |''20 links required''<br /> |3 FT<br /> |-<br /> |5<br /> |PT0619<br /> |BRACKET-MOVING END<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |9<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |10<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HC0262<br /> |VALVE-CROSS PORT RELIEF<br /> |<br /> |''Includes cartridges''<br /> |1<br /> |-<br /> |12a<br /> |43846002<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''†† For Item 12 (Not shown)''<br /> |2<br /> |-<br /> |13<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |H1560<br /> |ADAPTER-45 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |E1329<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |''PVC - Includes cover''<br /> |1<br /> |-<br /> |19<br /> |HW0212<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |20<br /> |HW0102<br /> |WASHER-FLAT-#10-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |21<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |22<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |23<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |''For Items 21 &amp; 22 (Not shown)''<br /> |3<br /> |-<br /> |24<br /> |HW1076<br /> |BOLT-FHSCS-3/8-16 X 1&quot;<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Units built prior to February 2014 without extended reach option use (4) HW0403 mounting bolts.''<br /> <br /> ''†† Cartridges are for replacement only.''<br /> |}<br /> <br /> === &lt;big&gt;'''&lt;u&gt;Magnet Components ''(Rotary Actuator)''&lt;/u&gt;'''&lt;/big&gt; ===<br /> <br /> ==== '''''&lt;big&gt;[Discontinued] Magnet Arm Configuration&lt;/big&gt;''''' ====<br /> [[File:BE-TS (Discontinued) Magnet Arm Configuration.png|alt=BE-TS (Discontinued) Magnet Arm Configuration|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41257014<br /> |TIE PLATE-SWING ARM<br /> |<br /> |''All units''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |41655008<br /> |EXTENSION-ARM<br /> |<br /> |''BE-36 only (Not shown)''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |43455001<br /> |EXTENSION-ARM<br /> |<br /> |''BE-42 only (Not shown)''<br /> |1<br /> |-<br /> |2<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0113<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0010<br /> |NUT-JAM-5/8-11<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |41655001<br /> |CARRIER TUBE-MAGNET SWING SHAFT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |7<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |9<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |6<br /> |-<br /> |10<br /> |41657006<br /> |SHAFT-MAGNET SWING<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |41698001<br /> |KEY-3/8&quot; X 7/16&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |N/A<br /> |STOP-MAGNET SWING<br /> |<br /> |''† Dicontinued''<br /> |1<br /> |-<br /> |13<br /> |PT0430<br /> |FLANGE BEARING-4 BOLT-1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |HW0513<br /> |BOLT-HHCS-1/2-13 X 2 1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |15<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |16<br /> |-<br /> |16<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |17<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |-<br /> |18<br /> |41655002<br /> |PLATE-MAGNET MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |41257015<br /> |BLOCK-TIGHTENER<br /> |<br /> |''2-piece item''<br /> |1<br /> |-<br /> |20<br /> |41257016<br /> |BLOCK-FIXED<br /> |<br /> |''2-piece item''<br /> |1<br /> |-<br /> |21<br /> |HW0423<br /> |BOLT-SHCS-3/8-16 X 3 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0806<br /> |SET SCREW-3/8-16 X 2&quot;<br /> |<br /> |''Replaces Swivel Head''<br /> |4<br /> |-<br /> |24<br /> |HW0424<br /> |NUT-JAM-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |25<br /> |41657017<br /> |INSULATOR-MAGNET MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |26<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |27<br /> |41657008<br /> |PAD-MAGNET SLIDE<br /> |<br /> |<br /> |2<br /> |-<br /> |28<br /> |HW0314<br /> |BOLT-FHSCS-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Refer to [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#&amp;#x5B;Current&amp;#x5D;_Magnet_Arm_Configuration_(Rotary_Actuator) &lt;nowiki&gt;[Current] Magnet Arm Configuration (Rotary Actuator)&lt;/nowiki&gt;] section for replacement / upgrade parts.''<br /> |}<br /> <br /> ==== '''&lt;big&gt;''Magnet Pivot Stop (Rotary Actuator)''&lt;/big&gt;''' ====<br /> [[File:BE-TS Magnet Pivot Stop.png|alt=BE-TS Magnet Pivot Stop|frameless|547x547px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |MAGNET PUSH/PULL ARM<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |43055010<br /> |MAGNET MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |PT0470<br /> |BEARING-MAGNET PIVOT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0525<br /> |BOLT-CARRIAGE-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |5<br /> |HW0524<br /> |BOLT-CARRIAGE-1/2-13 X 2&quot;<br /> |<br /> |''†† Stop Plate location''<br /> |4<br /> |-<br /> |6<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |7<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |16<br /> |-<br /> |8<br /> |43058009<br /> |PLATE-ROTATION STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |43058003<br /> |SLEEVE-STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43058010<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |PL0501<br /> |GROMMET-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |43057037<br /> |INSULATOR-BOTTOM<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |16<br /> |41657008<br /> |SLIDE-MAGNET<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0314<br /> |BOLT-FHSCS-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |44558001<br /> |PLATE-ROTATION STOP<br /> |<br /> |''†† Single compartment units only''<br /> |2<br /> |-<br /> |REF<br /> |43052014<br /> |ADJUSTABLE PUSH-PULL ARM<br /> |<br /> |''Includes Items 19-23''<br /> |A/R<br /> |-<br /> |19<br /> |43055018<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |20<br /> |43055019<br /> |MAGNET MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |21<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |22<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† 1-Piece Arm no longer available. Must be replaced with Adjustable Arm.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Single compartment Stop Plates require (1) additional 2&quot; long Carriage Bolt each''<br /> |}<br /> <br /> ==== &lt;big&gt;''[Current] Magnet Arm Configuration (Rotary Actuator)''&lt;/big&gt; ====<br /> [[File:BE-TS (Current) Magnet Arm Configuration.png|alt=BE-TS (Current) Magnet Arm Configuration|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |80252012<br /> |MAGNET SWING STOP KIT<br /> |<br /> |''Includes Items 1 through 6''<br /> |A/R<br /> |-<br /> |1<br /> |43057029<br /> |PLATE-STOP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43058003<br /> |SLEEVE-STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |43057030<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |PL0501<br /> |GROMMET-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0509<br /> |BOLT-HHCS-1/2-13 X 4 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |44557003<br /> |PLATE-STOP<br /> |<br /> |''† Single compartment units only''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† For units equipped with Pivot Shaft. See [Current] Magnet Arm Configuration (Rotary Actuator) for units with Independent Magnet Pivot Bearings.'' <br /> |}<br /> <br /> ==== &lt;big&gt;''Magnet Mounting Hardware (Rotary Actuator)''&lt;/big&gt; ====<br /> [[File:BE-TS Magnet Mounting Hardware (Rotary Actuator).png|alt=BE-TS Magnet Mounting Hardware (Rotary Actuator)|frameless|554x554px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43032009<br /> |MAGNET ASSEMBLY<br /> |<br /> |''Includes Items 1 through 12''<br /> |A/R<br /> |-<br /> |1<br /> |N/A<br /> |ELECTROMAGNET-95VDC<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |E0314<br /> |SENSOR-PROXIMITY-30MM<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |N/A<br /> |GASKET-REAR<br /> |<br /> |''Discontinued - Not used''<br /> |2<br /> |-<br /> |4<br /> |41657002<br /> |COVER-PROXIMITY SENSOR HOUSING<br /> |<br /> |''Rear''<br /> |2<br /> |-<br /> |5<br /> |HW1065<br /> |SCREW-SHCS-#6-32 X 3/8&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |6<br /> |HW1066<br /> |WASHER-LOCK-#6<br /> |<br /> |<br /> |8<br /> |-<br /> |7<br /> |E0376<br /> |INDICATOR LIGHT<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |8<br /> |E0335<br /> |RECEPTACLE-5 PIN MALE<br /> |<br /> |''With 12&quot; lead''<br /> |2<br /> |-<br /> |9<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |N/A<br /> |GASKET-FRONT<br /> |<br /> |''Discontinued - Not used''<br /> |2<br /> |-<br /> |11<br /> |41657003<br /> |COVER-PROXIMITY SENSOR HOUSING<br /> |80252015<br /> |''Front''<br /> |2<br /> |-<br /> |12<br /> |HW0138<br /> |SCREW-FHSCS-#8-32 X 3/8&quot;<br /> |80252015<br /> |<br /> |8<br /> |-<br /> |13<br /> |HW0433<br /> |STUD-1/2-13 X 5&quot;<br /> |80252006<br /> | rowspan=&quot;5&quot; |''For units with Magnet Pivot Shaft only.'' <br /> <br /> ''See [Discontinued] Magnet Arm Configuration for units built prior to 11/01/14''<br /> |8<br /> |-<br /> |14<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |80252006<br /> |8<br /> |-<br /> |15<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |80252006<br /> |40<br /> |-<br /> |16<br /> |HW1002<br /> |SPRING-1/2&quot;<br /> |80252006<br /> |24<br /> |-<br /> |17<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |80252006<br /> |8<br /> |-<br /> |18<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |80252014<br /> | rowspan=&quot;4&quot; |''For units with independent Pivot Bearings only.'' <br /> <br /> ''See [Current] Magnet Arm Configuration for units built 11/01/14 to present)''<br /> |4<br /> |-<br /> |19<br /> |HW1002<br /> |SPRING-1/2&quot;<br /> |80252014<br /> |4<br /> |-<br /> |20<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |80252014<br /> |8<br /> |-<br /> |21<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |80252014<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Extractors built or replacement magnets shipped prior to October 2021 used multi-piece indicator lights with replaceable bulb and lens and are no longer available. Current indicator light is a 1-piece LED assembly. Replacement of any multi-piece component requires replacing entire assembly with current, 1-piece indicator light.''<br /> |}<br /> <br /> === '''''Magnet Cords (Rotary Actuator)''''' ===<br /> [[File:BE-TS Magnet Cords.png|alt=BE-TS Magnet Cords|frameless|555x555px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1105<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |''Weather proof box''<br /> |1<br /> |-<br /> |2<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |E1106<br /> |COVER-JUNCTION BOX<br /> |<br /> |''Weather proof with gasket'' <br /> |1<br /> |-<br /> |4<br /> |E0333<br /> |RECEPTACLE-9 PIN MALE<br /> |<br /> |''With 12&quot; lead''<br /> |1<br /> |-<br /> |5<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |6<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |7<br /> |E0334<br /> |CORD-5 PIN FEMALE<br /> |<br /> |''With 36&quot; lead''<br /> |2<br /> |-<br /> |8<br /> |E0332<br /> |CORD-9 PIN FEMALE-90 DEG<br /> |<br /> |''With 36&quot; lead''<br /> |1<br /> |-<br /> |9<br /> |PL0501<br /> |GROMMET-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |41657013-2<br /> |PLATE-PANEL MOUNTING<br /> |<br /> |''With single cable hole''<br /> |1<br /> |-<br /> |11<br /> |E0334-6<br /> |CORD-5 PIN FEMALE<br /> |<br /> |''With 72&quot; lead''<br /> |2<br /> |-<br /> |12<br /> |43057038-2<br /> |PLATE-PANEL MOUNTING<br /> |<br /> |''With dual cable holes''<br /> |1<br /> |}<br /> '''''&lt;big&gt;Magnet Panel Mounting (Rotary Actuator)&lt;/big&gt;'''''<br /> <br /> [[File:BE-TS Panel Mounting (Rotary Actuator).png|alt=BE-TS Panel Mounting (Rotary Actuator)|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43057021<br /> |PLATE-STIFFENER<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |''Not shown''<br /> |24<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |5<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |12<br /> |-<br /> |6<br /> |41637001<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0325<br /> |BOLT-5/16-18 X 1 3/4&quot;-PAN HEAD<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |N/A<br /> |INSULATOR-THREADED FEMALE<br /> |<br /> |''Discontinued''<br /> |4<br /> |-<br /> |9<br /> |HW0106<br /> |WASHER-FLAT-5/16&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0326<br /> |NUT-NILN-5/16-18<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |E1016<br /> |FUSE HOLDER<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |E0325<br /> |FUSE-7AMP-250VAC<br /> |<br /> |''FLM-7 or FNM-7''<br /> |1<br /> |-<br /> |16<br /> |PL0307<br /> |INSULATOR-MALE STUD<br /> |<br /> |<br /> |4<br /> |}<br /> '''''&lt;big&gt;Magnet Extractor Electrical Panel (Rotary Actuator)&lt;/big&gt;'''''<br /> <br /> [[File:BE-TS Magnet Extractor Electrical Panel (Rotary Actuator).png|alt=BE-TS Magnet Extractor Electrical Panel (Rotary Actuator)|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41637001<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41637002<br /> |WIRE WAY<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |41637003<br /> |WIRE WAY<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |41637004<br /> |TRACK-TERMINAL BLOCK MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |41637005<br /> |TRACK-TERMINAL BLOCK MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |7<br /> |HW0132<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |<br /> |10<br /> |-<br /> |8<br /> |HW0133<br /> |NUT-NILN-#8-32<br /> |<br /> |''Not shown''<br /> |16<br /> |-<br /> |9<br /> |E1020<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |12<br /> |-<br /> |10<br /> |E1040<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |E1330<br /> |END ANCHOR<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |E1009<br /> |RECTIFIER-FULL WAVE BRIDGE<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |HW0135<br /> |SCREW-RHMS-#8-32 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |E1313<br /> |SOCKET-RELAY-8 PIN<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0139<br /> |SCREW-RHMS-#8-32 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |E0331<br /> |RELAY-DPDT-110VAC<br /> |<br /> |''with Indicator Light''<br /> |2<br /> |}<br /> <br /> === &lt;big&gt;'''&lt;u&gt;Swing Arm Stop (Rotary Actuator)&lt;/u&gt;'''&lt;/big&gt; ===<br /> [[File:BE-TS Swing Arm Stop (Rotary Actuator).png|alt=BE-TS Swing Arm Stop (Rotary Actuator)|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055007<br /> |MOUNT-STOP-SWING ARM<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |2<br /> |43057024<br /> |STOP-SWING ARM<br /> |<br /> |''BE-24''<br /> |4<br /> |-<br /> |43057023<br /> |STOP-SWING ARM<br /> |<br /> |''BE-36 &amp; BE-42''<br /> |4<br /> |-<br /> |3<br /> |HW0304<br /> |BOLT-HHCS-1/4-20 X 1 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Vacuum_Swing_Arm_Stop_(Rotary_Actuator) Vacuum Swing Arm Stop (Rotary Actuator)] section for single compartment stop mount and stop.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Extended Reach (Rotary Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Vacuum Extended Reach (Rotary Actuator).png|alt=BE-TS Vacuum Extended Reach (Rotary Actuator)|frameless|536x536px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41257014<br /> |TIE PLATE-SWING ARM<br /> |<br /> |''All units''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |41655008<br /> |EXTENSION-ARM<br /> |<br /> |''BE-36 only (Not shown)''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |43455001<br /> |EXTENSION-ARM<br /> |<br /> |''BE-42 only (Not shown)''<br /> |1<br /> |-<br /> |2<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |P0301-1<br /> |HOSE-COIL-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |41257035<br /> |STANDOFF<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW1072<br /> |RESTRAINT-HOSE<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0318<br /> |BOLT-SHCS-1/4-20 X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |HW0312<br /> |SCREW-SHSS-1/4-20 X 1&quot;-CUP POINT<br /> |<br /> |<br /> |1<br /> |}<br /> [[File:BE-TS Vacuum Extended Reach (Rotary Actuator) 2.png|alt=BE-TS Vacuum Extended Reach (Rotary Actuator)|frameless|547x547px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41255005<br /> |ARM-EXTENSION-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0416<br /> |CYLINDER-EXTENDED REACH-VACUUM<br /> |<br /> |''2 1/2&quot; X 12&quot; Cylinder''<br /> |1<br /> |-<br /> |3<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JICM X #6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |41257031<br /> |PIN-CLEVIS END<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |00197036<br /> |PIN-ROD END<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1058<br /> |PIN-HITCH<br /> |<br /> |<br /> |4<br /> |}<br /> [[File:BE-TS Vacuum Extended Reach (Rotary Actuator) 3.png|alt=BE-TS Vacuum Extended Reach (Rotary Actuator) 3|frameless|541x541px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41255004<br /> |HOUSING-EXTENDED REACH-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41257030<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |41258002<br /> |PLATE-BEARING<br /> |80258001<br /> |''Side''<br /> |2<br /> |-<br /> |8<br /> |41258005<br /> |PLATE-SHIM<br /> |80258001<br /> |''Side''<br /> |2<br /> |-<br /> |9<br /> |41258003<br /> |PLATE-BEARING<br /> |80258001<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |10<br /> |41258004<br /> |PLATE-SHIM<br /> |80258001<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |11<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |28<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |28<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Extended Reach (Rotary Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Extended Reach Rotary Actuator.png|alt=BE-TS Extended Reach Rotary Actuator|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43046001<br /> |ROTARY ACTUATOR<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |80000002<br /> |ROTARY ACTUATOR BASE ASSEMBLY<br /> |<br /> |''Without Actuator''<br /> |1<br /> |-<br /> |2A<br /> |N/A<br /> |VERTICAL CARRIER PLATE-OUTER<br /> |<br /> |''Included with 80000002''<br /> |2<br /> |-<br /> |2B<br /> |N/A<br /> |VERTICAL CARRIER PLATE-INNER<br /> |<br /> |''Included with 80000002''<br /> |1<br /> |-<br /> |2C<br /> |N/A<br /> |CARRIER BASE PLATE<br /> |<br /> |''Included with 80000002''<br /> |1<br /> |-<br /> |3<br /> |HW1070<br /> |PIN-PULL DOWEL-5/8&quot; X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0508<br /> |BOLT-SHCS-1/2-13 X 3/4&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW1045<br /> |PIN-PULL DOWEL-3/8&quot; X 1 1/2&quot;<br /> |<br /> |''Included with 80000002''<br /> |6<br /> |-<br /> |6<br /> |HW0412<br /> |BOLT-SHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |''Included with 80000002''<br /> |12<br /> |-<br /> |7<br /> |H0010<br /> |FITTING-BULKHEAD-3/4-16 X #4 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |4<br /> |}<br /> [[File:BE-TS Extended Reach Rotary Actuator 2.png|alt=BE-TS Extended Reach Rotary Actuator |frameless|535x535px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PT0634<br /> |BRACKET-MALE END<br /> |<br /> |''Sols as a set''<br /> |1<br /> |-<br /> |2<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |10<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |PT0627<br /> |HOSE CARRIER<br /> |<br /> |''14 links required''<br /> |39&quot;<br /> |-<br /> |7<br /> |PT0634<br /> |BRACKET-FEMALE END<br /> |<br /> |''Sols as a set''<br /> |1<br /> |-<br /> |8<br /> |HC0262<br /> |VALVE-CROSS PORT RELIEF<br /> |<br /> |<br /> |1<br /> |-<br /> |8a<br /> |43046003<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''† For Item 8 (Not shown)''<br /> |2<br /> |-<br /> |9<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |H1546<br /> |ADAPTER-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |H1617<br /> |ADAPTER-45 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HC0237<br /> |VALVE-SEQUENCING<br /> |<br /> |<br /> |1<br /> |-<br /> |12a<br /> |43046005<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''† For Item 12 (Not shown)''<br /> |A/R<br /> |-<br /> |13<br /> |HW0317<br /> |BOLT-HHCS-1/4-20 X 3 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |H1560<br /> |ADAPTER-45 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |H1600<br /> |ADAPTER-90 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Cartridges are for replacement only''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Extended Reach (Rotary Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Extended Reach (Rotary Actuator).png|alt=BE-TS Magnet Extended Reach (Rotary Actuator)|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055011<br /> |ARM-EXTENSION-MAGNET<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0415<br /> |CYLINDER-EXTENDED REACH-MAGNET<br /> |<br /> |''2 1/2&quot; X 8&quot; Cylinder''<br /> |1<br /> |-<br /> |3<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JICM X #6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CLEVIS END<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-ROD END<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-EXTERNAL-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW1043<br /> |CLAMP-CYLINDER<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |43057044-2<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |43058019<br /> |SUPPORT-CABLE-BAND CLAMP<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> [[File:BE-TS Magnet Extended Reach (Rotary Actuator) 2.png|alt=BE-TS Magnet Extended Reach (Rotary Actuator) |frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055012<br /> |HOUSING-EXTENDED REACH-MAGNET<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |43058013<br /> |PLATE-BEARING-SIDE<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |43058016<br /> |PLATE-SHIM-SIDE<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |43058014<br /> |PLATE-BEARING-UPPER/LOWER<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43058015<br /> |PLATE-SHIM-UPPER/LOWER<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |24<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |24<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Extended Reach End Plate&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Extended Reach End Plate.png|alt=BE-TS Extended Reach End Plate|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |CARRIER SHAFT-EXTRACTOR ARM<br /> |<br /> |''† 3-Hole version''<br /> |A/R<br /> |-<br /> |2<br /> |PT0413<br /> |COLLAR-SHAFT-3&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |50057009<br /> |PLATE-END-3 HOLE<br /> |<br /> |''Replacement part only''<br /> |4<br /> |-<br /> |4<br /> |50057010<br /> |SHIM-END PLATE<br /> |<br /> |''†† See notes''<br /> |A/R<br /> |-<br /> |5<br /> |HW1076<br /> |BOLT-FHSCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |6<br /> |43057045<br /> |CARRIER SHAFT-EXTRACTOR ARM<br /> |<br /> |''1-Hole version''<br /> |2<br /> |-<br /> |7<br /> |43017076<br /> |PLATE-END-1 HOLE<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† 3-Hole Carrier Shaft no longer available. Must replace 3-Hole shaft with current, 1-Hole version along with new ennd plates &amp; hardware.'' <br /> |-<br /> | colspan=&quot;6&quot; |''†† Shim quantity varies due to manufacturing tolerances.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Carrier Shafts &amp; Bearings&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Carrier Shafts &amp; Bearings (Helical Actuator).png|alt=BE-TS Carrier Shafts &amp; Bearings (Helical Actuator)|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43057045<br /> |CARRIER SHAFT-EXTRACTOR ARM<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |2<br /> |43054007<br /> |BEARING-EXTRACTOR ARM CARRIER<br /> |80252002<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0412<br /> |BOLT-SHCS-3/8-16 X 1 1/4&quot;<br /> |80252002<br /> |<br /> |16<br /> |-<br /> |4<br /> |PT0413<br /> |COLLAR-SHAFT-3&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |50057010<br /> |SHIM-END PLATE<br /> |<br /> |<br /> |A/R<br /> |-<br /> |6<br /> |43017076<br /> |PLATE-END-1 HOLE<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |PT0624<br /> |FITTING-ZERK<br /> |80252002<br /> |''Not shown''<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Extended_Reach_End_Plate Extended Reach End Plate] section for Extended Reach equipped units.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Drive Nut Assembly (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Drive Nut Assembly (Helical Actuator).png|alt=BE-TS Drive Nut Assembly (Helical Actuator)|frameless|600x600px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43054006<br /> |DRIVE NUT ASSEMBLY<br /> |80252003<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0426<br /> |BOLT-SHCS-3/8-16 X 5 1/2&quot;<br /> |80252003<br /> |''† See notes''<br /> |4<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |80252003<br /> |''† See notes''<br /> |4<br /> |-<br /> |4<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |80252003<br /> |''† See notes''<br /> |4<br /> |-<br /> |5<br /> |PT0624<br /> |FITTING-ZERK<br /> |80252003<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† It is recommended to replce mounting hardware when replacing Drive Nut Assembly.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Swing Arms &amp; Actuator (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;[Discontinued] Helical Actuator&lt;/big&gt;''''' ====<br /> [[File:BE-TS Swing Arms &amp; Actuator (Helical Actuator).png|alt=BE-TS [Discontinued] Swing Arms &amp; Actuator (Helical Actuator)|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |HELICAL ACTUATOR<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |43057046<br /> |ACTUATOR BASE PLATE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43058022<br /> |SPACER-ACTUATOR<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0725<br /> |BOLT-HHCS-3/4-16 X 4-3/4&quot;-GR8<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0066<br /> |NUT-JAM-3/4-16-GR8<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43055013<br /> |SWING ARM-LHS<br /> |<br /> | rowspan=&quot;6&quot; |''†† See notes''<br /> |1<br /> |-<br /> |7<br /> |HW0620<br /> |BOLT-HHCS-5/8-11 X 1-1/4&quot;<br /> |<br /> |6<br /> |-<br /> |8<br /> |HW0013<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |6<br /> |-<br /> |9<br /> |43055014<br /> |SWING ARM-RHS<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1-1/4&quot;<br /> |<br /> |6<br /> |-<br /> |11<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |6<br /> |-<br /> |12<br /> |43042008<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |43042010<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE, LONG<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |H1619<br /> |ADAPTER-90 DEG-#6 JICM X #4 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |H0010<br /> |FITTING-H-BULKHEAD-1/4 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |H1504<br /> |ADAPTER-#6 JICM X #4 NPTM<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW1082<br /> |CLAMP-HOSE<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Discontinued Helical Actuator no longer available. Must replace with current Helical Actuator Retro Kit 80252032. See [Current] Helical Actuator.'' <br /> <br /> ''†† Swing arms manufactured prior to January 2022 use 10 bolts &amp; washers per Swing Arm.'' <br /> |}<br /> <br /> ==== '''''&lt;big&gt;[Current] Helical Actuator&lt;/big&gt;''''' ====<br /> [[File:BE-TS (Current) Swing Arms &amp; Actuator (Helical Actuator).png|alt=BE-TS (Current) Swing Arms &amp; Actuator (Helical Actuator)|frameless|544x544px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |N/A<br /> |43052020<br /> |HELICAL ACTUATOR ASSEMBLY<br /> |<br /> |''Includes Items 1 through 17''<br /> |1<br /> |-<br /> |1<br /> |HC0180<br /> |HELICAL ACTUATOR<br /> |80252032<br /> |<br /> |1<br /> |-<br /> |2<br /> |43057046<br /> |ACTUATOR BASE PLATE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43058022<br /> |SPACER-ACTUATOR<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0725<br /> |BOLT-HHCS-3/4-16 X 4-3/4&quot;-GR8<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0066<br /> |NUT-JAM-3/4-16-GR8<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43055013<br /> |SWING ARM-LHS<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0620<br /> |BOLT-HHCS-5/8-11 X 1-1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |8<br /> |HW0013<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |9<br /> |43055014<br /> |SWING ARM-RHS<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1-1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |11<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |12<br /> |43042011<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE, 90 DEG<br /> |80252032<br /> |''† See notes''<br /> |1<br /> |-<br /> |13<br /> |43042012<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE, SHORT<br /> |80252032<br /> |''† See notes''<br /> |1<br /> |-<br /> |14<br /> |H1619<br /> |ADAPTER-90 DEG-#6 JICM X #4 SAEM<br /> |80252032<br /> |<br /> |2<br /> |-<br /> |15<br /> |H0010<br /> |FITTING-H-BULKHEAD-1/4 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |H1504<br /> |ADAPTER-#6 JICM X #4 NPTM<br /> |80252032<br /> |<br /> |1<br /> |-<br /> |17<br /> |H1691<br /> |ADAPTER-45 DEG-#6 JICM X #4 NPTM<br /> |80252032<br /> |''† See notes''<br /> |1<br /> |-<br /> |18<br /> |HW1082<br /> |CLAMP-HOSE<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Hard-Pipes and 45 degree adapter required if replacing discontinued actuator with current Actuator Kit Part # 80252032 required for discontinued actuator replacement.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Swing Arm Stops &amp; Tie Plate&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Swing Arm Stops &amp; Tie Plate (Helical Actuator).png|alt=BE-TS Swing Arm Stops &amp; Tie Plate (Helical Actuator)|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43057050<br /> |TIE PLATE-HELICAL SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0113<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0010<br /> |NUT-JAM-5/8-11<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |43057052<br /> |STOP-POLY-SWING ARM<br /> |<br /> |''† See notes''<br /> |4<br /> |-<br /> |6<br /> |HW0441<br /> |BOLT-FHSCS-3/8-16 X 1-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW0031<br /> |NUT-LOCK-3/8-16, DEFORMED THREAD<br /> |<br /> |''† † See notes''<br /> |4<br /> |-<br /> |8<br /> |44555002<br /> |SWING ARM STOP<br /> |<br /> |''Single compartment use only''<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Replacement Poly Stop design updated from Square to Round. Stop Spacers not required with current, Round-Style Stops.''<br /> |-<br /> | colspan=&quot;6&quot; |''† † Deformed Thread Lock Nut replaces Acorn Nut and Split Lock Washer used previously.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Push/Pull Arm Mounting (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Push-Pull Arm Mounting.png|alt=BE-TS Push-Pull Arm Mounting (Helical Actuator)|frameless|542x542px]]<br /> {| class=&quot;wikitable&quot;<br /> ! rowspan=&quot;2&quot; |ITEM<br /> ! rowspan=&quot;2&quot; |BHS PART NUMBER<br /> ! rowspan=&quot;2&quot; |DESCRIPTION<br /> ! rowspan=&quot;2&quot; |REF. KIT NO.<br /> ! rowspan=&quot;2&quot; |NOTES<br /> ! colspan=&quot;3&quot; |NO. REQ<br /> |-<br /> !BE-24<br /> !BE-36<br /> !BE-42<br /> |-<br /> | rowspan=&quot;2&quot; |1<br /> |41655008<br /> |EXTENSION-ARM<br /> |<br /> |''†BE-36 units only''<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |1<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |43455001<br /> |EXTENSION-ARM<br /> |<br /> |''†BE-42 units only''<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |1<br /> |-<br /> |2<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> | colspan=&quot;2&quot; |12<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |12<br /> | colspan=&quot;2&quot; |24<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> | colspan=&quot;2&quot; |12<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |6<br /> | colspan=&quot;2&quot; |12<br /> |-<br /> ! colspan=&quot;8&quot; |NOTES<br /> |-<br /> | colspan=&quot;8&quot; |''† BE-24 units do not utilize an Arm Extension.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Extractor Arm (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Non-Pivoting Vacuum Cup Arm (Helical Actuator)&lt;/big&gt;''''' ====<br /> [[File:BE-TS Non-Pivoting Vacuum Cup Arm (Helical Actuator).png|alt=BE-TS Non-Pivoting Vacuum Cup Arm (Helical Actuator)|frameless|578x578px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0428<br /> |STUD-VACUUM-3/8-16 X 5&quot;<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |2<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |HW-KIT-2<br /> |<br /> |40<br /> |-<br /> |3<br /> |HW1001<br /> |SPRING-3/8&quot;<br /> |HW-KIT-2<br /> |<br /> |24<br /> |-<br /> |4<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0424<br /> |NUT-JAM-3/8-16<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |6<br /> |P0402<br /> |HOSE BARB-1/4&quot; X #4 MNPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |REF<br /> |43052014<br /> |ADJUSTABLE PUSH-PULL ARM<br /> |<br /> |''Includes Items 7 through 11''<br /> |A/R<br /> |-<br /> |7<br /> |43055018<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |43055019<br /> |VACUUM CUP MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Pivoting Vacuum Cup Arm (Helical Actuator)&lt;/big&gt;''''' ====<br /> [[File:BE-TS Pivoting Vacuum Cup Arm (Helical Actuator).png|alt=BE-TS Pivoting Vacuum Cup Arm (Helical Actuator)|frameless|525x525px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43052014<br /> |ADJUSTABLE PUSH-PULL ARM<br /> |<br /> |''Includes Items 1 through 5''<br /> |A/R<br /> |-<br /> |1<br /> |43055018<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43055019<br /> |VACUUM CUP MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |43055020<br /> |MOUNT-PIVOT-VACUUM CUP<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |PT0470<br /> |BEARING-PIVOT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0525<br /> |BOLT-CARRIAGE-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |9<br /> |HW0524<br /> |BOLT-CARRIAGE-1/2-13 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |11<br /> |HW0008<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |16<br /> |-<br /> |12<br /> |43058009<br /> |PLATE-ROTATION STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |43058003<br /> |SLEEVE-STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |43058010<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |4<br /> |-<br /> |16<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |43037002-2<br /> |SUPPORT-CABLE RESTRAINT<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |21<br /> |P0506<br /> |ELBOW-STR-90 DEG-#4 NPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |22<br /> |P0402<br /> |HOSE BARB-1/4&quot; X #4 MNPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |23<br /> |43057056-2<br /> |BRACKET-HOSE SUPPORT<br /> |<br /> |<br /> |2<br /> |-<br /> |24<br /> |PL0507<br /> |GROMMET-5/8&quot; I.D.<br /> |<br /> |<br /> |2<br /> |-<br /> |25<br /> |P0302<br /> |HOSE-VACUUM-1/4&quot; I.D.<br /> |<br /> |''2 pieces at 48&quot; each''<br /> |96&quot;<br /> |-<br /> |26<br /> |HW0443<br /> |BOLT-HHCS-3/8-16 X 3-1/2&quot;<br /> |HW-KIT-3<br /> |<br /> |8<br /> |-<br /> |27<br /> |HW1001<br /> |SPRING-3/8&quot;<br /> |HW-KIT-3<br /> |<br /> |16<br /> |-<br /> |28<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |HW-KIT-3<br /> |<br /> |32<br /> |-<br /> |29<br /> |HW0424<br /> |NUT-JAM-3/8-16<br /> |HW-KIT-3<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Cup Rotation Stop (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Vacuum Cup Rotation Stop (Helical Actuator).png|alt=BE-TS Vacuum Cup Rotation Stop (Helical Actuator)|frameless|583x583px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |445558001<br /> |PLATE-ROTATION STOP<br /> |<br /> |''† Single compartment units only''<br /> |2<br /> |-<br /> |2<br /> |HW0525<br /> |BOLT-CARRIAGE-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0524<br /> |BOLT-CARRIAGE-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0008<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Components (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Vacuum Components (Helical Actuator).png|alt=BE-TS Vacuum Components (Helical Actuator)|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43058021<br /> |STIFFENER PLATE-HELICAL SWING ARM<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |24<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |5<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |12<br /> |-<br /> |6<br /> |P0005<br /> |PUMP-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |P0207<br /> |VALVE-VACUUM RELEASE<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |P0208<br /> |FILTER-HI FLOW<br /> |<br /> |<br /> |3<br /> |-<br /> |9<br /> |H0011<br /> |NIPPLE-#4 X 2&quot;-BRASS<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |P0502<br /> |TEE-#4 FNPT-BRASS<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |P0506<br /> |ELBOW-STR-90 DEG-#4 NPT-BRASS<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |P0503<br /> |NIPPLE-#4 NPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |P0402<br /> |HOSE BARB-1/4&quot; X #4 MNPT-BRASS<br /> |<br /> |<br /> |6<br /> |-<br /> |14<br /> |P0111<br /> |FILTER-VACUUM-IN-LINE<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0206<br /> |SCREW-RHMS-#10-32 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |43037014-2<br /> |BRACKET-CABLE RESTRAINT<br /> |<br /> |<br /> |1<br /> |-<br /> |17<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |18<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |21<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |22<br /> |E0624<br /> |CONNECTOR-1/2&quot;<br /> |<br /> |''Includes Lock Nut''<br /> |1<br /> |-<br /> |23<br /> |HW0212<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Arm (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Arm (Helical Actuator).png|alt=BE-TS Magnet Arm (Helical Actuator)|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43052014<br /> |ADJUSTABLE PUSH-PULL ARM<br /> |<br /> |''Includes Items 1 through 5''<br /> |A/R<br /> |-<br /> |1<br /> |43055018<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43055019<br /> |VACUUM CUP MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |43055016<br /> |MOUNT-PIVOT-MAGNET<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |PT0470<br /> |BEARING-PIVOT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0525<br /> |BOLT-CARRIAGE-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |9<br /> |HW0524<br /> |BOLT-CARRIAGE-1/2-13 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |11<br /> |HW0008<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |16<br /> |-<br /> |12<br /> |43058009<br /> |PLATE-ROTATION STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |43058003<br /> |SLEEVE-STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |43058010<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |18<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |43037002-2<br /> |SUPPORT-CABLE RESTRAINT<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |21<br /> |E0334-6'<br /> |CORD-5 PIN FEMALE<br /> |<br /> |''With 72&quot; lead''<br /> |2<br /> |-<br /> |22<br /> |E1041<br /> |WIRE LOOM-SPIRAL-3/8&quot;<br /> |<br /> |''2 pieces at 24&quot; each''<br /> |48&quot;<br /> |-<br /> |23<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |2<br /> |-<br /> |24<br /> |43057037<br /> |INSULATOR-BOTTOM<br /> |<br /> |<br /> |2<br /> |-<br /> |25<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |26<br /> |41657008<br /> |SLIDE-MAGNET<br /> |<br /> |<br /> |2<br /> |-<br /> |27<br /> |HW0314<br /> |BOLT-FHSCS-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Assembly (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Assembly (Helical Actuator).png|alt=BE-TS Magnet Assembly (Helical Actuator)|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43032009<br /> |MAGNET ASSEMBLY<br /> |<br /> |''Includes Items 1 through 12''<br /> |A/R<br /> |-<br /> |1<br /> |N/A<br /> |ELECTROMAGNET-95VDC<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |E0314<br /> |SENSOR-PROXIMITY-30MM<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |41657002<br /> |COVER-PROXIMITY SENSOR HOUSING<br /> |<br /> |''Rear''<br /> |2<br /> |-<br /> |4<br /> |HW1065<br /> |SCREW-SHCS-#6-32 X 3/8&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW1066<br /> |WASHER-LOCK-#6<br /> |<br /> |<br /> |8<br /> |-<br /> |6<br /> |E0335<br /> |RECEPTACLE-5 PIN MALE<br /> |<br /> |''With 12&quot; lead''<br /> |2<br /> |-<br /> |7<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |E0376<br /> |INDICATOR LIGHT<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |9<br /> |41657003<br /> |COVER-PROXIMITY SENSOR HOUSING<br /> |80252015<br /> |''Front''<br /> |2<br /> |-<br /> |10<br /> |HW0138<br /> |SCREW-FHSCS-#8-32 X 3/8&quot;<br /> |80252015<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |80252014<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW1002<br /> |SPRING-1/2&quot;<br /> |80252014<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |80252014<br /> |<br /> |8<br /> |-<br /> |14<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |80252014<br /> |<br /> |4<br /> |-<br /> |15<br /> |E0336<br /> |METAL OXIDE VARISTOR<br /> |<br /> |''Not shown''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Extractors built or replacement magnets shipped prior to October 2021 used Multi-Piece Indicator Lights with replaceable bulb and lens and are no longer available. Current Indicator Light is a 1-Piece LED assembly. Replacement of any Multi-Piece component requires replacing entire assembly with current, 1-Piece Indicator Light.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Components (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Components (Helical Actuator).png|alt=BE-TS Magnet Components (Helical Actuator)|frameless|534x534px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43058021<br /> |STIFFENER PLATE-HELICAL SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43057051-2<br /> |STIFFENER-MAGNET-HELICAL SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |4<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |24<br /> |-<br /> |5<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |6<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |12<br /> |-<br /> |7<br /> |PL0307<br /> |INSULATOR-MALE STUD<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0106<br /> |WASHER-FLAT-5/16&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |HW0105<br /> |WASHER-LOCK-5/16&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0004<br /> |NUT-HEX-5/16-18<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |12<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |13<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |14<br /> |E1016<br /> |FUSE HOLDER<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |E0325<br /> |FUSE-7 AMP-250VAC<br /> |<br /> |''FLM-7 or FNM-7''<br /> |1<br /> |-<br /> |16<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |17<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Panel (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Panel (Helical Actuator).png|alt=BE-TS Magnet Panel (Helical Actuator)|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41637001<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41637002<br /> |WIRE WAY-SHORT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |41637003<br /> |WIRE WAY-LONG<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |41637004<br /> |TRACK-MOUNTING-SHORT<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |41637005<br /> |TRACK-MOUNTING-LONG<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> | rowspan=&quot;3&quot; |''Mounting track hardware (Not shown)''<br /> |10<br /> |-<br /> |7<br /> |HW0132<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |10<br /> |-<br /> |8<br /> |HW0133<br /> |NUT-NILN-#8-32<br /> |<br /> |16<br /> |-<br /> |9<br /> |E1020<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |12<br /> |-<br /> |10<br /> |E1040<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |E1330<br /> |END ANCHOR<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |E1009<br /> |RECTIFIER-FULL WAVE BRIDGE<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |HW0135<br /> |SCREW-RHMS-#8-32 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |E1313<br /> |SOCKET-RELAY-8 PIN<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |E0331<br /> |RELAY-DPDT-110VAC<br /> |<br /> |''With Indicator Light''<br /> |2<br /> |-<br /> |16<br /> |HW0139<br /> |SCREW-RHMS-#8-32 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Extended Reach Hydraulics (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== &lt;big&gt;''[Discontinued] Helical Actuator''&lt;/big&gt; ====<br /> [[File:BE-TS (Discontinued) Helical Actuator.png|alt=BE-TS (Discontinued) Helical Actuator|frameless|546x546px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43042009<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |H0010<br /> |FITTING-BULKHEAD-3/4-16 X #4 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |43055017<br /> |ELBOW-BULKHEAD<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> | rowspan=&quot;3&quot; |7<br /> |4-48-0402-0402<br /> |HYD HOSE-1/4&quot; X 48&quot; (BE-24 UNITS)<br /> |<br /> | rowspan=&quot;3&quot; |''Cylinder rod-end hose''<br /> | rowspan=&quot;3&quot; |1<br /> |-<br /> |4-54-0402-0402<br /> |HYD HOSE-1/4&quot; X 54&quot; (BE-36 UNITS)<br /> |<br /> |-<br /> |4-56-0402-0402<br /> |HYD HOSE-1/4&quot; X 56&quot; (BE-42 UNITS)<br /> |<br /> |-<br /> | rowspan=&quot;3&quot; |8<br /> |4-38-0402-0402<br /> |HYD HOSE-1/4&quot; X 38&quot; (BE-24 UNITS)<br /> |<br /> | rowspan=&quot;3&quot; |''Cylinder rod-end hose''<br /> | rowspan=&quot;3&quot; |1<br /> |-<br /> |4-44-0402-0402<br /> |HYD HOSE-1/4&quot; X 44&quot; (BE-36 UNITS)<br /> |<br /> |-<br /> |4-46-0402-0402<br /> |HYD HOSE-1/4&quot; X 46&quot; (BE-42 UNITS)<br /> |<br /> |-<br /> |9<br /> |41257035<br /> |STANDOFF-HOSE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW1093<br /> |CLAMP-CABLE-3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0311<br /> |BOLT-FHSCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> ==== &lt;big&gt;''[Current] Helical Actuator''&lt;/big&gt; ====<br /> [[File:BE-TS (Current) Helical Actuator.png|alt=BE-TS (Current) Helical Actuator|frameless|567x567px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43042013<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |H0010<br /> |FITTING-BULKHEAD-3/4-16 X #4 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |43055021<br /> |ELBOW-BULKHEAD<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> | rowspan=&quot;3&quot; |7<br /> |4-48-0402-0402<br /> |HYD HOSE-1/4&quot; X 48&quot; (BE-24 UNITS)<br /> |<br /> | rowspan=&quot;3&quot; |''Cylinder rod-end hose''<br /> | rowspan=&quot;3&quot; |1<br /> |-<br /> |4-54-0402-0402<br /> |HYD HOSE-1/4&quot; X 54&quot; (BE-36 UNITS)<br /> |<br /> |-<br /> |4-56-0402-0402<br /> |HYD HOSE-1/4&quot; X 56&quot; (BE-42 UNITS)<br /> |<br /> |-<br /> | rowspan=&quot;3&quot; |8<br /> |4-38-0402-0402<br /> |HYD HOSE-1/4&quot; X 38&quot; (BE-24 UNITS)<br /> |<br /> | rowspan=&quot;3&quot; |''Cylinder rod-end hose''<br /> | rowspan=&quot;3&quot; |1<br /> |-<br /> |4-44-0402-0402<br /> |HYD HOSE-1/4&quot; X 44&quot; (BE-36 UNITS)<br /> |<br /> |-<br /> |4-46-0402-0402<br /> |HYD HOSE-1/4&quot; X 46&quot; (BE-42 UNITS)<br /> |<br /> |-<br /> |9<br /> |41257035<br /> |STANDOFF-HOSE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW1093<br /> |CLAMP-CABLE-3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0311<br /> |BOLT-FHSCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Extended Reach (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== &lt;big&gt;'''''Non-Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator)'''''&lt;/big&gt; ====<br /> [[File:BE-TS Non-Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator).png|alt=BE-TS Non-Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator)|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41255005<br /> |ARM-EXTENSION<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41255004<br /> |HOUSING-EXTENDED REACH<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0416<br /> |CYLINDER-2 1/2&quot; X 12&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CYLINDER-REAR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-CYLINDER-ROD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JIC X # 6 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |28<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |28<br /> |-<br /> |15<br /> |41258002<br /> |PLATE-BEARING<br /> |80258001<br /> |''Side''<br /> |2<br /> |-<br /> |16<br /> |41258005<br /> |PLATE-SHIM<br /> |80258001<br /> |''Side''<br /> |2<br /> |-<br /> |17<br /> |41258003<br /> |PLATE-BEARING<br /> |80258001<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |18<br /> |41258004<br /> |PLATE-SHIM<br /> |80258001<br /> |''Upper / lower''<br /> |2<br /> |}<br /> &lt;big&gt;'''''Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator)'''''&lt;/big&gt;<br /> <br /> [[File:BE-TS Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator).png|alt=BE-TS Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator)|frameless|553x553px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055011<br /> |ARM-EXTENSION<br /> |<br /> |''Pivoting cup only''<br /> |1<br /> |-<br /> |2<br /> |43055012<br /> |HOUSING-EXTENDED REACH<br /> |<br /> |''Pivoting cup only''<br /> |1<br /> |-<br /> |3<br /> |HC0415<br /> |CYLINDER-2 1/2&quot; X 8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CYLINDER-REAR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-CYLINDER-ROD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JIC X # 6 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |24<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |24<br /> |-<br /> |15<br /> |43058013<br /> |PLATE-BEARING<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |16<br /> |43058016<br /> |PLATE-SHIM<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |17<br /> |43058014<br /> |PLATE-BEARING<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |18<br /> |43058015<br /> |PLATE-SHIM<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |19<br /> |HW1043<br /> |CLAMP-CYLINDER<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |43058019<br /> |SUPPORT-CABLE-BAND CLAMP<br /> |<br /> |<br /> |2<br /> |-<br /> |21<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |22<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |23<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |24<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Extended Reach (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== &lt;big&gt;'''''[Discontinued] Extended Reach Magnet Arm (Helical Actuator)'''''&lt;/big&gt; ====<br /> [[File:BE-TS (Discontinued) Extended Reach Magnet Arm (Helical Actuator).png|alt=BE-TS (Discontinued) Extended Reach Magnet Arm (Helical Actuator)|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055011<br /> |ARM-EXTENSION<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43055012<br /> |HOUSING-EXTENDED REACH<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0415<br /> |CYLINDER-2 1/2&quot; X 8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CYLINDER-REAR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-CYLINDER-ROD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JIC X # 6 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |24<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |24<br /> |-<br /> |15<br /> |43058013<br /> |PLATE-BEARING<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |16<br /> |43058016<br /> |PLATE-SHIM<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |17<br /> |43058014<br /> |PLATE-BEARING<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |18<br /> |43058015<br /> |PLATE-SHIM<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |19<br /> |HW1043<br /> |CLAMP-CYLINDER<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |43058019<br /> |SUPPORT-CABLE-BAND CLAMP<br /> |<br /> |<br /> |2<br /> |-<br /> |21<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |24<br /> |43057004-2<br /> |SUPPORT-CABLE-MAGNET<br /> |<br /> |<br /> |2<br /> |}<br /> &lt;big&gt;'''''[Current] Extended Reach Magnet Arm (Helical Actuator)'''''&lt;/big&gt;<br /> <br /> [[File:BE-TS (Current) Extended Reach Magnet Arm (Helical Actuator).png|alt=BE-TS (Current) Extended Reach Magnet Arm (Helical Actuator)|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |50055004<br /> |ARM-EXTENSION<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |50055005<br /> |HOUSING-EXTENDED REACH<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0415<br /> |CYLINDER-2 1/2&quot; X 8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CYLINDER-REAR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-CYLINDER-ROD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JIC X # 6 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |20<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |20<br /> |-<br /> |15<br /> |50058009<br /> |PLATE-BEARING<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |16<br /> |50058012<br /> |PLATE-SHIM<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |17<br /> |50058010<br /> |PLATE-BEARING<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |18<br /> |50058011<br /> |PLATE-SHIM<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |19<br /> |HW1043<br /> |CLAMP-CYLINDER<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |43058019<br /> |SUPPORT-CABLE-BAND CLAMP<br /> |<br /> |<br /> |2<br /> |-<br /> |21<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |24<br /> |43057004-2<br /> |SUPPORT-CABLE-MAGNET<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> == &lt;big&gt;Drive and Idler Wheels&lt;/big&gt; ==<br /> <br /> === &lt;big&gt;&lt;u&gt;Drive Wheel Mounting&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Drive Wheel Mounting.png|alt=BE-TS Drive Wheel Mounting|frameless|519x519px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0503<br /> |BOLT-HHCS-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |2<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |''Cylinder Bracket bolt only''<br /> |2<br /> |-<br /> |3<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> === &lt;big&gt;&lt;u&gt;Drive Wheel Motors&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Drive Wheel Motors.png|alt=BE-TS Drive Wheel Motors|frameless|535x535px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;2&quot; |1<br /> |43822001-6B<br /> |FLOOR DRIVE ASSEMBLY (W/ 200CC MOTOR)<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |43822004-6B<br /> |FLOOR DRIVE ASSEMBLY (W/ 400CC MOTOR)<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |2<br /> |43827004<br /> |PLATE-MOTOR MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0416<br /> |BOLT-SHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |H1612<br /> |ADAPTER-90 DEG-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |N/A<br /> |ROD-THREADED-1/2-13 X 7 3/4&quot;<br /> |<br /> |''†† See notes''<br /> |8<br /> |-<br /> |7<br /> |N/A<br /> |SPACER-DRIVE WHEEL-4.75&quot; LG<br /> |<br /> |''†† See notes''<br /> |8<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |43827006<br /> |SPACER-DRIVE WHEEL-4.125&quot; LG<br /> |<br /> |Must be ordered as a set of 4<br /> |8<br /> |-<br /> |11<br /> |HW0516<br /> |BOLT-HHCS-1/2-13 X 6 1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |12<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> | rowspan=&quot;2&quot; |13<br /> |N/A<br /> |MOTOR-HYDRAULIC-200CC<br /> |<br /> |''††† Keyed Shaft''<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |N/A<br /> |MOTOR-HYDRAULIC-400CC<br /> |<br /> |''††† Keyed Shaft''<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |14<br /> |HW1071<br /> |KEY-WOODRUFF-#808 STD<br /> |<br /> |<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |15<br /> |HC0124-6B<br /> |MOTOR-HYDRAULIC-200CC<br /> |<br /> |''† Spline Shaft''<br /> |2<br /> |-<br /> |HC0126-6B<br /> |MOTOR-HYDRAULIC-400CC<br /> |80322003<br /> |''† Spline Shaft''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† 200CC Motors required for units equipped with Parallel Drive Circuit.''<br /> ''400CC Motors required for units equipped with Series Drive Circuit.''<br /> <br /> ''See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Cross_Port_Relief Cross Port Relief] section to determine if unit is Parallel or Series equipped and approximate effectivity of each type.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Parts obsolete and no longer available. Must replace with Items 10 &amp; 11.''<br /> |-<br /> | colspan=&quot;6&quot; |''††† Parts obsolete and no longer available. Must replace with Spline Drive Conversion Kit.''<br /> |-<br /> | colspan=&quot;6&quot; |'''''NOTE:''' Effectivity dates refer to dates new extractor units are shipped from the factory. Replacement part effectivity &lt;u&gt;may&lt;/u&gt; differ due to factory inventory levels at time of parts order. Consult factory if unsure of parts needed.''<br /> |}<br /> <br /> === &lt;big&gt;&lt;u&gt;Drive Wheel Bearings&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Drive Wheel Bearings.png|alt=BE-TS Drive Wheel Bearings|frameless|537x537px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43825001<br /> |FRAME-FLOOR DRIVE<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |C0510-1<br /> |WHEEL-10&quot; X 5&quot;-POLY<br /> |80322001<br /> |<br /> |2<br /> |-<br /> |3<br /> |43822003<br /> |SHAFT-WHEEL (W/ COUPLING BODY)<br /> |<br /> |''Available in multiple kits''<br /> |2<br /> |-<br /> |4<br /> |43897004<br /> |KEY-3/8&quot; X 4 3/4&quot;<br /> |80322001<br /> |<br /> |2<br /> |-<br /> |5<br /> |PT0430<br /> |FLANGE BEARING-4 BOLT-1 1/2&quot;<br /> |80322001<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |7<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |16<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |9<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |16<br /> |-<br /> |10<br /> |PT0321<br /> |CHAIN-COUPLING-#50<br /> |<br /> |''Includes connecting pin''<br /> |2<br /> |-<br /> |11<br /> |N/A<br /> |COUPLING BODY-TAPER BORE-#50<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |12<br /> |N/A<br /> |BUSHING-TAPER LOCK-1&quot;<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |13<br /> |HW0323<br /> |BOLT-HHCS-5/16-18 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |14<br /> |PT0330<br /> |COUPLING BODY-#50-SPLINE BORE<br /> |80322003<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW1110<br /> |RETAINING RING-1 1/2&quot;-HEAVY DUTY<br /> |<br /> |''†† Available in multiple kits''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Parts obsolete and no longer available. Spline Drive Conversion Kit required. Reuse of bushing after disassembly not recommended.'' <br /> |-<br /> | colspan=&quot;6&quot; |''† † Retaining Rings used on units shipped after 7/01/12. Units shipped from 7/01/13 are equipped with (2) Retaining Rings per shaft - (1) on each side of the wheel. Units shipped after 11/01/13 are equipped with only (1) Snap Rings as shown. Second Snap Ring is no longer used or required.''<br /> |-<br /> | colspan=&quot;6&quot; |''NOTE: Effectivity dates refer to dates new extractor units are shipped from the factory. Replacement part effectivity &lt;u&gt;'''may'''&lt;/u&gt; differ due to factory inventory levels at time of parts order. Consult factory if unsure of parts needed.''<br /> |}<br /> <br /> === &lt;big&gt;&lt;u&gt;Drive Wheel Assembly&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Drive Wheel Assembly.png|alt=BE-TS Drive Wheel Assembly|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43822005<br /> |RADIAL PISTON DRIVE WHEEL ASSEMBLY<br /> |<br /> |''Includes Items 1 through 6''<br /> |2<br /> |-<br /> |1<br /> |43825003<br /> |RADIAL PISTON DRIVE WHEEL MOUNT<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0160-1<br /> |400CC RADIAL PISTON MOTOR<br /> |<br /> |''Includes nuts &amp; studs''<br /> |1<br /> |-<br /> |REF<br /> |HC0160-STUD<br /> |STUD-M14-1.5 X 46MM<br /> |<br /> |''Replacement motor stud''<br /> |A/R<br /> |-<br /> |REF<br /> |HC0160-NUT<br /> |NUT-FLANGED HEX-M14-1.5<br /> |<br /> |''Replacement motor nut''<br /> |A/R<br /> |-<br /> |3<br /> |C0511<br /> |WHEEL-POLY-10 X 5&quot;-FLANGE MOUNT<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |5<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |6<br /> |-<br /> |7<br /> |H1612<br /> |ADAPTER-H-90 DEG-#10 SAEM X #8 JICM<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |H1539<br /> |ADAPTER-#8 JIC X #6 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1586<br /> |ADAPTER-90 DEG-#8 JICSW X #6 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |H0801<br /> |TEE-H-#6 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H1501<br /> |ADAPTER-#8 JIC X #6 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |H0200<br /> |REDUCER-#6 NPT X #4 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |H0206<br /> |PLUG-#4 NPT<br /> |<br /> |''† Left Drive Wheel only''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Plug used on Left Drive Wheel Assembly only. Hose from Left Drive Wheel Assembly is connected to tee on Right Drive Wheel Assembly.'' <br /> |}<br /> <br /> === &lt;big&gt;&lt;u&gt;Idler Casters&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Idler Casters.png|alt=BE-TS Idler Casters|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |C0500-1<br /> |CASTER-RIGID-10&quot; X 5&quot;-POLY<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |3<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |<br /> |''For Cylinder Bracket position'' <br /> |2<br /> |-<br /> |4<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |16<br /> |-<br /> |5<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |6<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> == &lt;big&gt;Electrical&lt;/big&gt; ==<br /> <br /> === &lt;u&gt;&lt;big&gt;AC Power Stanchion&lt;/big&gt;&lt;/u&gt; ===<br /> <br /> ==== &lt;big&gt;''Aero-Motive Energy Rail''&lt;/big&gt; ====<br /> [[File:BE-TS Aero-Motive Energy Rail.png|alt=BE-TS Aero-Motive Energy Rail|frameless|536x536px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43835001<br /> |STANCHION-POWER<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0511<br /> |BOLT-HHCS-1/2-13 X 3 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |46837014-2<br /> |TOW ARM-COLLECTOR TROLLEY<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |46838015<br /> |SPACER BLOCK-TOW ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW1030<br /> |U-BOLT-3/8-16 X 2&quot; X 5&quot;-SQUARE BEND<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .625&quot; to .750&quot;''<br /> |1<br /> |-<br /> |13<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |HW1051<br /> |EYE BOLT-3/8-16 X 5 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0126<br /> |WASHER-FLAT-3/8&quot;-FENDER<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |BD0010<br /> |TROLLEY-ENERGY RAIL<br /> |<br /> | rowspan=&quot;2&quot; |''Aero-Motive Rail only''<br /> <br /> ''(orange housing color)''<br /> |1<br /> |-<br /> |19<br /> |BD0100<br /> |BRUSH-TROLLEY<br /> |<br /> |4<br /> |}<br /> <br /> ==== '''&lt;big&gt;''Vahle Energy Rail''&lt;/big&gt;''' ====<br /> [[File:BE-TS Vahle Energy Rail.png|alt=BE-TS Vahle Energy Rail|frameless|535x535px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1A<br /> |BD0031<br /> |TROLLEY-ENERGY RAIL, KSL<br /> |<br /> | rowspan=&quot;3&quot; |''† Vahle KSL Rail only''<br /> <br /> ''(green housing color)''<br /> |1<br /> |-<br /> |2A<br /> |BD0040<br /> |BRUSH-PHASE, KSL<br /> |<br /> |3<br /> |-<br /> |3A<br /> |BD0041<br /> |BRUSH-GROUND, KSL<br /> |<br /> |1<br /> |-<br /> |1B<br /> |BD0231<br /> |TROLLEY-ENERGY RAIL, KBH<br /> |<br /> | rowspan=&quot;3&quot; |''† Vahle KBH Rail only''<br /> <br /> ''(gray housing color)''<br /> <br /> ''(Nots shown)''<br /> |1<br /> |-<br /> |2B<br /> |BD0240<br /> |BRUSH-PHASE, KBH<br /> |<br /> |3<br /> |-<br /> |3B<br /> |BD0241<br /> |BRUSH-GROUND, KBH<br /> |<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |4<br /> |BD0030<br /> |TOW ARM-COLLECTOR TROLLEY, KSL<br /> |<br /> |''† Vahle KSL Rail only''<br /> <br /> ''(green housing color)''<br /> |1<br /> |-<br /> |BD0230<br /> |TOW ARM-COLLECTOR TROLLEY, KBH<br /> |<br /> |''† Vahle KBH Rail only''<br /> <br /> ''(gray housing color)''<br /> |1<br /> |-<br /> |5<br /> |46838015<br /> |SPACER-BLOCK-TOW ARM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |6<br /> |41237083-2<br /> |BRACKET-TOW ARM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |7<br /> |HW1054<br /> |U-BOLT-5/16-18 X 2&quot; X 5&quot;-SQUARE BEND<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW0323<br /> |BOLT-HHCS-5/16-18 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0106<br /> |WASHER-FLAT-5/16&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0150<br /> |WASHER-FLAT-5/16&quot;-FENDER<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0105<br /> |WASHER-LOCK-5/16&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0004<br /> |NUT-HEX-5/16-18<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Verify Energy Rail type (KSL OR KBH) by the color of the energy rail housing.'' <br /> |-<br /> | colspan=&quot;6&quot; |''†† Not all units equipped with Tow Arm Bracket. Location of Spacer Block and/or Tow Arm Bracket may vary from configuration shown.'' <br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Control Panel&lt;/big&gt;&lt;/u&gt;''' ===<br /> '''&lt;big&gt;''[Discontinued] Control Panel for Units with 10 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS (Discontinued) Control Panel for Units with 10HP.png|alt=BE-TS (Discontinued) Control Panel for Units with 10HP|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-CONTROL PANEL-16&quot; X 14&quot; X 6&quot;<br /> |<br /> |CONSULT FACTORY<br /> |1<br /> |-<br /> |2<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |Grip size .250&quot; to.375&quot;<br /> |1<br /> |-<br /> |6<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |Grip size .625&quot; to .750&quot;<br /> |2<br /> |-<br /> |7<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |Grip size .500&quot; to .625&quot;<br /> |2<br /> |-<br /> |8<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |''Not shown''<br /> |1<br /> |-<br /> |9<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |''Not shown''<br /> |4<br /> |}<br /> [[File:BE-TS (Discontinued) Control Panel for Units with 10HP Detail.png|alt=BE-TS (Discontinued) Control Panel for Units with 10HP Detail|frameless|556x556px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0640<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |BLANK PANEL WITHOUT HOLES<br /> |1<br /> |-<br /> |2<br /> |E0120<br /> |MAGNETIC STARTER-NEMA 1 3/4&quot;<br /> |<br /> |WITH OVERLOAD<br /> |1<br /> |-<br /> |3<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |<br /> |17<br /> |-<br /> |4<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |<br /> |17<br /> |-<br /> |5<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |17<br /> |-<br /> |6<br /> |E0207-1<br /> |TRANSFORMER<br /> |<br /> |480VAC TO 120VAC, 0.75 Kva<br /> |1<br /> |-<br /> |7<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |HW0003<br /> |NUT-NILN-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |E1023<br /> |WIREWAY<br /> |<br /> |SOLD BY LENGTH<br /> |A/R<br /> |-<br /> |11<br /> |E1024<br /> |MOUNTING TRACK<br /> |<br /> |SOLD BY LENGTH<br /> |A/R<br /> |-<br /> |12<br /> |E1020<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |16<br /> |-<br /> |13<br /> |E1040<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |E1330<br /> |END ANCHOR<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |E0341<br /> |GROUND LUG<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |E0902<br /> |FUSE-6A<br /> |<br /> |FLM-6<br /> |1<br /> |}<br /> <br /> ==== '''&lt;big&gt;''[Current] Control Panel for Units with 20 HP Power Unit''&lt;/big&gt;''' ====<br /> [[File:BE-TS (Current) Control Panel for Units with 20HP.png|alt=BE-TS (Current) Control Panel for Units with 20HP|frameless|601x601px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-24&quot; X 16&quot; X 6&quot;<br /> |<br /> |CONSULT FACTORY<br /> |1<br /> |-<br /> |2<br /> |E0123-1<br /> |HANDLE-DISCONNECT<br /> |<br /> |INCL. MOUNTING SCREWS<br /> |1<br /> |-<br /> |3<br /> |E0662<br /> |RESTRAINT-3/4&quot;-LIQUID TIGHT<br /> |<br /> |INCL. LOCKNUT<br /> |1<br /> |-<br /> |4<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |GRIP SIZE .500&quot; TO .625&quot;<br /> |2<br /> |-<br /> |5<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |GRIP SIZE .625&quot; TO .750&quot;<br /> |1<br /> |-<br /> |6<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |7<br /> |E0661<br /> |RESTRAINT-3/4&quot;-90 DEG-LIQUID TIGHT<br /> |<br /> |INCL. LOCKNUT<br /> |1<br /> |-<br /> |8<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |GRIP SIZE .250&quot; TO .375&quot;<br /> |1<br /> |-<br /> |9<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |GRIP SIZE .450&quot; TO .560&quot;<br /> |2<br /> |-<br /> |10<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |11<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |}<br /> [[File:BE-TS (Current) Control Panel for Units with 20HP Details.png|alt=BE-TS (Current) Control Panel for Units with 20HP Details|frameless|645x645px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |YE0506<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |''Blank panel without holes''<br /> |1<br /> |-<br /> |2<br /> |YE0205-1<br /> |SWITCH-DISCONNECT-80A<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43036007<br /> |SHAFT-DISCONNECT<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |YE0409<br /> |FUSE HOLDER-SINGLE POLE<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |E0914<br /> |FUSE-10A<br /> |<br /> |''FLM-10''<br /> |1<br /> |-<br /> |6<br /> |E0902<br /> |FUSE-6A<br /> |<br /> |''FLM-6''<br /> |1<br /> |-<br /> |7<br /> |E0903<br /> |FUSE-12A<br /> |<br /> |''FLM-12''<br /> |1<br /> |-<br /> |8<br /> |YE0402<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |17<br /> |-<br /> |9<br /> |YE0405<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |YE0406<br /> |END ANCHOR<br /> |<br /> |<br /> |6<br /> |-<br /> |11<br /> |E0136<br /> |FUSE HOLDER-3 POLE<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |YE0901<br /> |FUSE-40A<br /> |<br /> |JTD-40-ID<br /> |3<br /> |-<br /> |13<br /> |E1013<br /> |BASE-RELAY<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |E1012<br /> |RELAY-11 PIN<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |E0137<br /> |FUSE HOLDER-2 POLE<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |YE0902<br /> |FUSE-10A<br /> |<br /> |''KLDR-10''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |17<br /> |N/A<br /> |CONTACTOR, &quot;A40&quot; SERIES<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |E0132-1<br /> |CONTACTOR, &quot;AF38&quot; SERIES<br /> |80332009<br /> |<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |18<br /> |N/A<br /> |OVERLOAD, &quot;TA&quot; SERIES<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |E0131-1<br /> |OVERLOAD, &quot;TF&quot; SERIES<br /> |80332009<br /> |<br /> |1<br /> |-<br /> |19<br /> |E1023<br /> |WIREWAY<br /> |<br /> |''Sold by length''<br /> |A/R<br /> |-<br /> |20<br /> |E0908<br /> |MOUNTING RAIL<br /> |<br /> |''Sold by length''<br /> |A/R<br /> |-<br /> |21<br /> |E1070<br /> |GROUND BAR-4 POSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |22<br /> |E1071<br /> |GROUND BAR-7 POSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |23<br /> |HW1061<br /> |SCREW-RHMS-#8-32 X 1&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |24<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> | rowspan=&quot;3&quot; |''Track and Wireway mounting hardware (Not shown)''<br /> |14<br /> |-<br /> |25<br /> |HW0133<br /> |WASHER-FLAT-#8<br /> |<br /> |14<br /> |-<br /> |26<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |17<br /> |-<br /> |27<br /> |E0139<br /> |AUXILIARY CONTACT BLOCK<br /> |80332009<br /> |''†† See notes''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† &quot;A40&quot; Series Contactor and &quot;TA&quot; Series Overload no longer available as of mid-March 2022. Components must be replaced with current Overload &amp; Relay Kit 80332009.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Auxiliary contact Block required for units equipped with &quot;AF38&quot; Series Contactor &amp; &quot;TF&quot; Series Overload.''<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Transformer&lt;/big&gt;&lt;/u&gt;''' ===<br /> '''&lt;big&gt;''Transformer for Units with 20 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS Transformer for Units with 20HP.png|alt=BE-TS Transformer for Units with 20HP|frameless|554x554px]]<br /> <br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0220<br /> |TRANSFORMER<br /> |<br /> |''480VAC to 120VAC, 3kVA''<br /> |1<br /> |-<br /> |2<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |3<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |7<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |3<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;Operator Console&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Operator Console Electrical.png|alt=BE-TS Operator Console Electrical|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0327<br /> |KEYED ACTUATOR ASSEMBLY<br /> |<br /> |''Includes 2 Keys &amp; Contact Block'' <br /> |1<br /> |-<br /> |2<br /> |E0351<br /> |KEY-REPLACEMENT<br /> |<br /> |''Set of 2 Keys''<br /> |A/R<br /> |-<br /> |3<br /> |E0309-1<br /> |HOUR METER<br /> |<br /> |''† Includes mounting hardware''<br /> |1<br /> |-<br /> |4<br /> |N/A<br /> |SWITCH-SELECTOR-3 POSITION<br /> |<br /> |''ON-OFF-ON, †† See notes''<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |5<br /> |N/A<br /> |LEGEND PLATE-VACUUM<br /> |<br /> |''††† See notes''<br /> |1<br /> |-<br /> |N/A<br /> |LEGEND PLATE-MAGNET<br /> |<br /> |''††† See notes''<br /> |1<br /> |-<br /> |6<br /> |N/A<br /> |CONTACT BLOCK-N/O<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |7<br /> |N/A<br /> |CONTACT BLOCK-N/C<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |8<br /> |E1083<br /> |SWITCH-SELECTOR-3 POSITION<br /> |80232001<br /> |''OFF-ON-OFF''<br /> |1<br /> |-<br /> |9<br /> |E1080<br /> |CONTACT BLOCK-N/O &amp; N/C<br /> |80232001<br /> |<br /> |2<br /> |-<br /> |10<br /> |YE0311<br /> |SWITCH-EMERGENCY STOP<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |YE0407<br /> |LEGEND PLATE-EMERGENCY STOP<br /> |<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Current Hour Meter is 3-Bolt version. Replacement of 4-Bolt version will require new mounting holes to be drilled in dashboard.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Parts no longer available. Must order new Selector Switch Kit 80232001''<br /> |-<br /> | colspan=&quot;6&quot; |''††† Parts no longer available. See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Labels_&amp;_Placards Labels &amp; Placards] section for current Placards''<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;Foot Switch&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Foot Switch Electrical.png|alt=BE-TS Foot Switch Electrical|frameless|701x701px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0301-1<br /> |SWITCH-FOOT OPERATED<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .500&quot; to .625&quot;''<br /> |1<br /> |-<br /> |3<br /> |E0515<br /> |CORD-14-3-SO/SOW<br /> |<br /> |<br /> |9'<br /> |-<br /> |4<br /> |HC0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |''If equipped''<br /> |2<br /> |-<br /> |5<br /> |HC0103<br /> |WASHER-1/4&quot;-LOCK<br /> |<br /> |''If equipped''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Open-Style Switch is a direct replacement for discontinued, Covered-Style Switch.'' <br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''Gate Switch'''&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Gate Switch Electrical.png|alt=BE-TS Gate Switch Electrical|frameless|613x613px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0312<br /> |SWITCH-PUSH BUTTON<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43017041<br /> |MOUNT-GATE SWITCH<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW1077<br /> |SCREW-RHMS-#10-24 X 5/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0307<br /> |BOLT-SHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |PL0502<br /> |GROMMET-3/8&quot; I.D.<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |YE0305<br /> |SWITCH-ROLLER<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |SS0303<br /> |WASHER-FLAT-#8<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |SS0111<br /> |SCREW-SHCS-#8-32 X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |SS0203<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''Proximity Switch'''&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Proximity Switch Electrical.png|alt=BE-TS Proximity Switch Electrical|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0314<br /> |SENSOR-PROXIMITY-30MM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43017027-2<br /> |BRACKET-PROXIMITY SENSOR<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |6<br /> |43017037-2<br /> |ANGLE-PROXIMITY SENSOR TARGET<br /> |<br /> |''Rotary Actuator units'' <br /> |1<br /> |-<br /> |43017084-2<br /> |ANGLE-PROXIMITY SENSOR TARGET<br /> |<br /> |''Helical Actuator units'' <br /> |1<br /> |-<br /> |7<br /> |HW0341<br /> |BOLT-FHSCS-1/4-20 X 5/8&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''120V Receptacle'''&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS 120V-Receptacle.png|alt=BE-TS 120V Receptacle|frameless|544x544px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |3<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0650<br /> |RECEPTACLE-DUPLEX<br /> |<br /> |''† 20A''<br /> |1<br /> |-<br /> |5<br /> |E0651<br /> |COVER-RECEPTACLE-DUPLEX<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0655<br /> |RECEPTACLE-GFCI<br /> |<br /> |''20A''<br /> |1<br /> |-<br /> |7<br /> |E0656<br /> |COVER-RECEPTACLE-GFCI<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |E0654<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |E0657<br /> |COVER-RECEPTACLE-DUPLEX/GFCI<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |''Mounting hardware (Not shown)''<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† If Duplex Receptacle has Split Feed (1 set of black &amp; white wires for each plug), the Break-Off Fin must be removed prior to installation.'' <br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''Console Enclosure'''&lt;/big&gt;&lt;/u&gt; ===<br /> <br /> ==== '''&lt;big&gt;''[Discontinued] Operator Console Enclosure for Units with 10 HP Power Unit''&lt;/big&gt;''' ====<br /> [[File:BE-TS (Discontinued) Operator Console Enclosure for Units with 10 HP Power Unit.png|alt=BE-TS (Discontinued) Operator Console Enclosure for Units with 10 HP Power Unit|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-6&quot; X 6&quot; X 4 &quot;<br /> |<br /> |''Consult factory''<br /> |1<br /> |-<br /> |2<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |3<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |4<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |5<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |8<br /> |43817087-2<br /> |BRACKET-MOUNTING-ENCLOSURE<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> | rowspan=&quot;4&quot; |''Mounting bracket hardware (Not shown)''<br /> |2<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |2<br /> |}<br /> '''&lt;big&gt;''[Discontinued] Operator Console Enclosure Panel for Units with 10 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS (Discontinued) Operator Console Enclosure Panel for Units with 10 HP Power Unit.png|alt=BE-TS (Discontinued) Operator Console Enclosure Panel for Units with 10 HP Power Unit|frameless|566x566px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0639<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |''Without holes''<br /> |1<br /> |-<br /> |2<br /> |E1024<br /> |TRACK-TERMINAL BLOCK<br /> |<br /> |''4 7/8&quot; LG''<br /> |1<br /> |-<br /> |3<br /> |E1020<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |9<br /> |-<br /> |4<br /> |E1330<br /> |END ANCHOR<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |E1040<br /> |END BARRIER<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0341<br /> |GROUND LUG<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |''2 for track mounting''<br /> |3<br /> |-<br /> |8<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |''2 for track mounting''<br /> |3<br /> |-<br /> |9<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |''2 for track mounting''<br /> |3<br /> |}<br /> '''&lt;big&gt;''[Current] Operator Console Enclosure for Units with 20 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS (Current) Operator Console Enclosure for Units with 20 HP Power Unit.png|alt=BE-TS (Current) Operator Console Enclosure for Units with 20 HP Power Unit|frameless|549x549px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-8&quot; X 8&quot; X 4&quot;<br /> |<br /> |''Consult factory''<br /> |1<br /> |-<br /> |2<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |3<br /> |-<br /> |3<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .625&quot; to .750&quot;''<br /> |1<br /> |-<br /> |4<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''† Grip size .450&quot; to .560&quot;''<br /> |4<br /> |-<br /> |5<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''†'' ''Grip size .250&quot; to .375&quot;''<br /> |4<br /> |-<br /> |6<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |11<br /> |-<br /> |7<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |E1349<br /> |SEAL-KNOCKOUT-1/2&quot;<br /> |<br /> |''† See notes''<br /> |A/R<br /> |-<br /> |9<br /> |43037003-2<br /> |BRACKET-MOUNTING-ENCLOSURE<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> | rowspan=&quot;4&quot; |''Mounting bracket hardware (Not shown)''<br /> |2<br /> |-<br /> |12<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |2<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Restraints sold for machines equipped with all available options. Machines built without certain options will have Knockout Seals (Item #8) installed in place of restraints.''<br /> |}<br /> '''&lt;big&gt;''[Current] Operator Console Enclosure Panel for Units with 20 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS (Current) Operator Console Enclosure Panel for Units with 20 HP Power Unit.png|alt=BE-TS (Current) Operator Console Enclosure Panel for Units with 20 HP Power Unit|frameless|527x527px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0135<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |''Blank panel without holes''<br /> |1<br /> |-<br /> |2<br /> |E0908<br /> |MOUNTING RAIL<br /> |<br /> |''Sold by length''<br /> |A/R<br /> |-<br /> |3<br /> |YE0402<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |14<br /> |-<br /> |4<br /> |YE0405<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |YE0406<br /> |END ANCHOR<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |E1074<br /> |JUMPER-2 POLE<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |E0130<br /> |GROUND BAR-7 POSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW1061<br /> |SCREW-RHMS-#8-32 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> | rowspan=&quot;3&quot; |''Track and Wireway mounting hardware (Not shown)''<br /> |2<br /> |-<br /> |10<br /> |HW0133<br /> |WASHER-FLAT-#8<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |4<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''Junction Box'''&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Junction Box.png|alt=BE-TS Junction Box|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |2<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |3<br /> |-<br /> |3<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .500&quot; to .625&quot;''<br /> |4<br /> |-<br /> |4<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .625&quot; to .750&quot;''<br /> |2<br /> |-<br /> |5<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Top Module Junction Box&lt;/big&gt;''''' ====<br /> [[File:BE-TS Top Module Junction Box.png|alt=BE-TS Top Module Junction Box|frameless|532x532px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1329<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0662<br /> |RESTRAINT-3/4&quot;-LIQUID TIGHT<br /> |<br /> |''Includes Locknut'' <br /> |1<br /> |-<br /> |3<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .625&quot; to .750&quot;''<br /> |1<br /> |-<br /> |4<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Wiring Diagrams&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;BE-TS with 10 HP Motor Wiring Diagram&lt;/big&gt;''''' ====<br /> [[File:BE-TS Wiring Diagram-10HP Motor.png|alt=BE-TS Wiring Diagram-10HP Motor|frameless|800x800px]]<br /> <br /> ==== '''''&lt;big&gt;BE-TS with Magnet and 10 HP Motor Wiring Diagram&lt;/big&gt;''''' ====<br /> [[File:BE-TS with Magnet and 10HP Motor Wiring Diagram.png|alt=BE-TS with Magnet and 10HP Motor Wiring Diagram|frameless|800x800px]]<br /> <br /> ==== '''''&lt;big&gt;BE-TS with Magnet and 20 HP Motor Wiring Diagram&lt;/big&gt;''''' ====<br /> [[File:BE-TS Magnet Wiring Diagram-20HP Motor.png|alt=BE-TS Magnet Wiring Diagram-20HP Motor|frameless|800x800px]]<br /> <br /> [[File:BE-TS Magnet Wiring Diagram-20HP Motor-02.png|alt=BE-TS Magnet Wiring Diagram-20HP Motor-02|frameless|800x800px]]<br /> <br /> [[File:BE-TS Magnet Wiring Diagram-20HP Motor-03.png|alt=BE-TS Magnet Wiring Diagram-20HP Motor-03|frameless|800x800px]]<br /> <br /> [[File:BE-TS Magnet Wiring Diagram-20HP Motor-04.png|alt=BE-TS Magnet Wiring Diagram-20HP Motor-04|frameless|800x800px]]<br /> <br /> == &lt;big&gt;Hydraulics&lt;/big&gt; ==<br /> <br /> === '''&lt;big&gt;&lt;u&gt;[Discontinued] 10 HP Power Unit&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:(Discontinued) BE-TS Power Unit (10HP).png|alt=(Discontinued) BE-TS Power Unit (10HP)|frameless|553x553px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0011<br /> |MOTOR-ELECTRIC-10HP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0326<br /> |ADAPTER-PUMP TO MOTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0325<br /> |PUMP-VANE-16 GPM<br /> |<br /> |''Variable displacement''<br /> |1<br /> |-<br /> |4<br /> |HC0327<br /> |COUPLING BODY-1 3/8&quot;<br /> |<br /> |''Motor end''<br /> |1<br /> |-<br /> |5<br /> |HC0329<br /> |SPIDER-COUPLING INSERT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HC0328<br /> |COUPLING BODY-7/8&quot;<br /> |<br /> |''Pump end''<br /> |1<br /> |-<br /> |7<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1 1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H1549<br /> |ADAPTER-#20 JICM X #24 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |H1595<br /> |ADAPTER-90 DEG-#20 JICM X #20 JICSW<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |H1609<br /> |ADAPTER-90 DEG-#12 JICM X #16 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |H1522<br /> |ADAPTER-#12 JICSW X #12 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |HC0260<br /> |VALVE-MAIN SYSTEM RELIEF<br /> |<br /> |<br /> |1<br /> |-<br /> |15a<br /> |43846003<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''†† For Item 15 (Not shown)''<br /> |A/R<br /> |-<br /> |16<br /> |HC0318<br /> |GAUGE-PRESSURE<br /> |<br /> |<br /> |1<br /> |-<br /> |17<br /> |H0206<br /> |PLUG-#4 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |H1108<br /> |ADAPTER-#10 JICM X #12 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |H1522<br /> |ADAPTER-#12 JICSW X #12 SAEM<br /> |<br /> |''† See note''<br /> |1<br /> |-<br /> |20<br /> |H1542<br /> |ADAPTER-#12 JICM X #12 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |21<br /> |HC0280<br /> |VALVE-CHECK<br /> |<br /> |''† See note''<br /> |1<br /> |-<br /> |22<br /> |H1542<br /> |ADAPTER-#12 JICM X #12 SAEM<br /> |<br /> |''† See note''<br /> |1<br /> |-<br /> |23<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .500&quot; to .625&quot;''<br /> |1<br /> |-<br /> |23a<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |''For Item 23 (Not shown)''<br /> |1<br /> |-<br /> |24<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |25<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |26<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |27<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Parts noted used on units built after April 2001.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Cartridges are for replacement only.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;[Discontinued] 30 Gallon Reservoir&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:(Discontinued) BE-TS 30 Gallon Reservoir.png|alt=(Discontinued) BE-TS 30 Gallon Reservoir|frameless|542x542px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43842001<br /> |RESERVOIR-VERTICAL-30 GAL<br /> |<br /> |''Includes Items 1 through 8''<br /> |1<br /> |-<br /> |1<br /> |HC0542<br /> |GASKET-CHANNEL<br /> |<br /> |''Sold by length''<br /> |7'<br /> |-<br /> |2<br /> |HC0340<br /> |GAUGE-SIGHT<br /> |<br /> |''with Thermometer''<br /> |1<br /> |-<br /> |3<br /> |HC0306<br /> |STRAINER-SUCTION<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HC0308<br /> |FILLER/BREATHER ASSEMBLY<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0209<br /> |SCREW-RHMS-10-32 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |BI0110<br /> |ELBOW-STR-90 DEG-#16 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |8<br /> |H0208<br /> |PLUG-#12 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1590<br /> |ADAPTER-90 DEG-#16 JICM X #16 FNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |BI0102<br /> |ELBOW-#12 FNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |BI0020<br /> |NIPPLE-#12 NPT X 3&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |BI0301<br /> |TEE-#12 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |H1502<br /> |ADAPTER-#8 JICM X #12 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |BI0002<br /> |NIPPLE-CLOSE-#12 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HC0307<br /> |RETURN LINE FILTER ASSEMBLY<br /> |<br /> |''Housing and Filter''<br /> |1<br /> |-<br /> |16<br /> |HC0317<br /> |FILTER-RETURN LINE<br /> |<br /> |''Replacement filter''<br /> |1<br /> |-<br /> |17<br /> |H1509<br /> |ADAPTER-#10 JICM X #12 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> | rowspan=&quot;4&quot; |''Mounting hardware''<br /> <br /> ''(Not shown)''<br /> |4<br /> |-<br /> |19<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |8<br /> |-<br /> |20<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |4<br /> |-<br /> |21<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;[Current] Power Unit (20 HP)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:(Current) BE-TS 30 Power Unit (20 HP).png|alt=(Current) BE-TS 30 Power Unit (20 HP)|frameless|531x531px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0040<br /> |MOTOR-ELECTRIC-20 HP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0357<br /> |ADAPTER-PUMP TO MOTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0356<br /> |PUMP-PISTON-71CC<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HC0358-M<br /> |COUPLING BODY-M300-1 5/8&quot; BORE<br /> |<br /> |''MOTOR SIDE''<br /> |1<br /> |-<br /> |5<br /> |HC0358-I<br /> |SPIDER-COUPLING INSERT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HC0358-P<br /> |COUPLING BODY-M300-1 1/4&quot; BORE<br /> |<br /> |''PUMP SIDE''<br /> |1<br /> |-<br /> |7<br /> |HW0602<br /> |BOLT-HHCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0113<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |H1604<br /> |ADAPTER-90 DEG-#12 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HC0363<br /> |ADAPTER-FLANGE-#32 NPT<br /> |<br /> |''Includes O-ring''<br /> |1<br /> |-<br /> |11<br /> |HC0240<br /> |BLOCK-CHECK VALVE<br /> |<br /> |''Includes Cartridge &amp; O-ring''<br /> |1<br /> |-<br /> |12<br /> |N/A<br /> |CARTRIDGE-CHECK VALVE<br /> |<br /> |''† Replacement cartridge''<br /> |A/R<br /> |-<br /> |13<br /> |H0300<br /> |ELBOW-STR-90 DEG-#4 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |HC0318<br /> |GAUGE-PRESSURE<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |HE0704<br /> |ADAPTER-SPLIT FLANGE-1&quot;<br /> |<br /> |''2-Piece adapter with O-ring''<br /> |1<br /> |-<br /> |16<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |H0211<br /> |ADAPTER-#24 NPT X #12<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |E0661<br /> |RESTRAINT-3/4&quot;-90 DEG-LIQUID TIGHT<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |HW0513<br /> |BOLT-HHCS-1/2-13 X 2 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |20<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |21<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTE<br /> |-<br /> | colspan=&quot;6&quot; |''† Consult factory''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;[Current] 45 Gallon Reservoir&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:(Current) BE-TS 45 Gallon Reservoir.png|alt=(Current) BE-TS 45 Gallon Reservoir|frameless|547x547px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43842010<br /> |45 GAL RESERVOIR ASSEMBLY<br /> |<br /> |''Includes Items 1 through 7''<br /> |A/R<br /> |-<br /> |1<br /> |43848005<br /> |PLATE-COVER<br /> |<br /> |''† See note''<br /> |1<br /> |-<br /> |2<br /> |HC0308<br /> |FILLER/BREATHER ASSEMBLY<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0209<br /> |SCREW-RHMS-10-32 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |4<br /> |HC0340<br /> |GAUGE-SIGHT<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H0208<br /> |PLUG-#12 NPT<br /> |<br /> |''Non-IIoT equipped units only''<br /> |1<br /> |-<br /> |6<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |7<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |8<br /> |HC0361<br /> |HOUSING-FILTER<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HC0354<br /> |CARTRIDGE-FILTER<br /> |<br /> |''10 Micron filtration''<br /> |1<br /> |-<br /> |10<br /> |HC0362<br /> |FLANGE-SUCTION TUBE<br /> |<br /> |''Includes hardware''<br /> |1<br /> |-<br /> |11<br /> |43848008<br /> |TUBE-SUCTION<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |H1569<br /> |ADAPTER-45 DEG-#12 JICM X #12 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |H0202<br /> |REDUCER-#24 SAE X #12 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |H1622<br /> |ADAPTER-90 DEG-#12 SAEM X #12 JICM<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |H1644<br /> |PLUG-#24 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |H1610<br /> |ADAPTER-45 DEG-#12 JICSW X #12 JICM<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |PB0311-1<br /> |NIPPLE-#12 NPT X 2&quot;-BRASS<br /> |<br /> | rowspan=&quot;3&quot; |''†† See notes''<br /> |1<br /> |-<br /> |20<br /> |BI0301<br /> |TEE-#12 FNPT<br /> |<br /> |1<br /> |-<br /> |21<br /> |H1502<br /> |ADAPTER-#8 JICM X #12 MNPT<br /> |<br /> |2<br /> |-<br /> |22<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> | rowspan=&quot;5&quot; |''Reservoir mounting hardware'' <br /> <br /> ''(Not shown)''<br /> |2<br /> |-<br /> |23<br /> |HW0405<br /> |BOLT-HHCS-3/8-16 X 2&quot;<br /> |<br /> |2<br /> |-<br /> |24<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |8<br /> |-<br /> |25<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |4<br /> |-<br /> |26<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† RVT silicone required to seal cover plate after removal.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Components required for units equipped with radial piston drive wheel motors plumbed with case drain hoses. See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Drive_Wheel_Assembly Drive Wheel Assembly] section.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Valve Assembly&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Lift Valve and Manifold Detail&lt;/big&gt;''''' ====<br /> [[File:BE-TS Lift Valve and Manifold.png|alt=BE-TS Lift Valve and Manifold|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |80342001<br /> |LEVER VALVE RETRO KIT<br /> |<br /> |''† Required prior to 2006'' <br /> |A/R<br /> |-<br /> |1<br /> |HC0257<br /> |VALVE-LEVER<br /> |<br /> |''Effective from 2006 to Present''<br /> |1<br /> |-<br /> |2<br /> |HC0252<br /> |MANIFOLD-D05-1 BANK<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0318<br /> |BOLT-SHCS-1/4-20 X 1 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |H1642<br /> |PLUG-#12 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H1542<br /> |ADAPTER-#12 JICM X #12 SAEM<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HC0248<br /> |FIXED FLOW REGULATOR<br /> |<br /> |''††14 GPM''<br /> |1<br /> |-<br /> |12<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |13<br /> |H1540<br /> |ADAPTER-#8 JICM X #8 SAEM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |14<br /> |43817085<br /> |PLATE-ADAPTER-VALVE<br /> |<br /> |''† Not shown''<br /> |1<br /> |-<br /> |15<br /> |SS0104<br /> |BOLT-SHCS-1/4-20 X 5/8&quot;-SST<br /> |<br /> |''† Not shown''<br /> |4<br /> |-<br /> |16<br /> |SS0300<br /> |WASHER-FLAT-1/4&quot;-SAE-SST<br /> |<br /> |''† Not shown''<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |<br /> |-<br /> | colspan=&quot;6&quot; |''† Kit includes Items 1 &amp; 14 through 16. Minor modifications to the dash board required.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† For units shipped April 2017 to present''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Floor Drive / Arm Rotation Valve and Manifold Detail&lt;/big&gt;''''' ====<br /> [[File:BE-TS Floor Drive-Arm Rotation Valve and Manifold.png|alt=BE-TS Floor Drive-Arm Rotation Valve and Manifold|frameless|570x570px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0233<br /> |VALVE-LEVER<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HC0251<br /> |MANIFOLD-D03-2 BANK<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1545<br /> |ADAPTER-#10 JICM X #10 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |H1600<br /> |ADAPTER-90 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |H1587<br /> |ADAPTER-#6 JICSW X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HC0211<br /> |VALVE-ADJUSTABLE FLOW CONTROL<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |H1504<br /> |ADAPTER-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |H1640<br /> |PLUG-#6 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |43817033-2<br /> |RISER PLATE<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |14<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |HC0233-SK<br /> |SEAL KIT<br /> |<br /> |''For Item 1 (Not shown)''<br /> |A/R<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Valve Assembly&lt;/big&gt;''''' ====<br /> [[File:BE-TS Valve Assembly.png|alt=BE-TS Valve Assembly|frameless|538x538px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0233<br /> |VALVE-LEVER<br /> |<br /> |<br /> |3<br /> |-<br /> |2<br /> |HC0250<br /> |MANIFOLD-D03-3 BANK<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1610<br /> |ADAPTER-90 DEG-#10 JICM X #10 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |H1641<br /> |PLUG-#10 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H1000<br /> |ADAPTER-#8 SAEM X #4 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |H0001<br /> |NIPPLE-#4 NPT<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HC0247<br /> |FIXED FLOW REGULATOR-2.25 GPM<br /> |<br /> |''† See notes''<br /> |4<br /> |-<br /> |8<br /> |H1504<br /> |ADAPTER-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |H1640<br /> |PLUG-#6 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |H1540<br /> |ADAPTER-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |43817034-2<br /> |RISER PLATE<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |14<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |15<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HC0233-SK<br /> |SEAL KIT<br /> |<br /> |''For Item 1 (Not shown)''<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Units built prior to January 2107 equipped with Adjustable Flow Controls. Fixed Flow Regulators are direct replacement for Adjustable Flow Controls.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Lift Cylinder&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Lift Cylinder.png|alt=BE-TS Lift Cylinder|frameless|582x582px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43822006<br /> |CLEVIS ASSEMBLY<br /> |<br /> |''Sold as assembly only''<br /> |4<br /> |-<br /> |2<br /> |HW0813<br /> |SCREW-SHSS-3/8-16 X 1/2&quot;<br /> |<br /> |''Nylon tipped''<br /> |8<br /> |-<br /> |3<br /> |HC0420<br /> |CYLINDER-LIFT<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |H1645<br /> |ADAPTER-90 DEG-#8 SAEM X #6 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |H0212<br /> |ADAPTER-#6 NPT X #8 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HC0425<br /> |VELOCITY FUSE<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Lift Circuit&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Lift Circuit.png|alt=BE-TS Lift Circuit|frameless|553x553px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43017014-2<br /> |SUPPORT-PILOT DOWN MANIFOLD<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43718008<br /> |STANDOFF<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0315<br /> |BOLT-HHCS-1/4-20 X 4 1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |10<br /> |-<br /> |7<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |5<br /> |-<br /> |8<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |5<br /> |}<br /> <br /> ==== '''''&lt;big&gt;[Discontinued] Lift Circuit Configuration&lt;/big&gt;''''' ====<br /> [[File:(Discontinued) BE-TS Lift Circuit Configuration.png|alt=(Discontinued) BE-TS Lift Circuit Configuration|frameless|507x507px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |H1507<br /> |ADAPTER-#8 JICM X #8 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0264<br /> |VALVE-CHECK-PILOT TO OPEN<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H1621<br /> |ADAPTER-#4 SAEM X #2 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HC0269<br /> |VALVE-ADJUSTABLE FLOW CONTROL<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |H1591<br /> |ADAPTER-90 DEG-#6 JICM X #2 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |H1587<br /> |ADAPTER-#6 JICSW X #4 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1501<br /> |ADAPTER-#8 JICM X #6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43047002<br /> |MANIFOLD-PILOT DOWN<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> ==== '''''&lt;big&gt;[Current] Lift Circuit Configuration&lt;/big&gt;''''' ====<br /> [[File:(Current) BE-TS Lift Circuit Configuration.png|alt=(Current) BE-TS Lift Circuit Configuration|frameless|534x534px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0215<br /> |VALVE-CHECK-CARTRIDGE<br /> |<br /> |<br /> |8<br /> |-<br /> |2<br /> |H1560<br /> |ADAPTER-45 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |H1670<br /> |ADAPTER-45 DEG-#12 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |H1612<br /> |ADAPTER-90 DEG-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HC0283<br /> |VALVE-COUNTER BALANCE<br /> |<br /> |''Includes cartridge''<br /> |1<br /> |-<br /> |6<br /> |43846004<br /> |CARTRIDGE-COUNTER BALANCE<br /> |<br /> |''Replacement cartridge''<br /> |A/R<br /> |-<br /> |7<br /> |H1552<br /> |ADAPTER-#6 JICM X #6 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |H1587<br /> |ADAPTER-#6 JICSW X #4 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1501<br /> |ADAPTER-#8 JICM X #6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43047002<br /> |MANIFOLD-PILOT DOWN<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Cartridges are for replacement only''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Down-Speed Flow Control&lt;/big&gt;''''' ====<br /> [[File:BE-TS Down-Speed Flow Control.png|alt=BE-TS Down-Speed Flow Control|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0270<br /> |VALVE-ADJUSTABLE FLOW CONTROL<br /> |<br /> |''Pressure compensated''<br /> |1<br /> |-<br /> |2<br /> |H0007<br /> |NIPPLE-#8 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1647<br /> |ADAPTER-90 DEG-#10 SAEM X #8 FNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |H1680<br /> |ADAPTER-#10 JICM X #8 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H1690<br /> |ADAPTER-#10 JICSW X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HC0248<br /> |FIXED FLOW REGULATOR<br /> |<br /> |''14 GPM''<br /> |1<br /> |-<br /> |7<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |H1612<br /> |ADAPTER-90 DEG-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1547<br /> |ADAPTER-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Cross Port Relief&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Mounting Configuration&lt;/big&gt;''''' ====<br /> [[File:BE-TS Cross Port Relief Mounting Configuration.png|alt=BE-TS Cross Port Relief Mounting Configuration|frameless|546x546px]]<br /> {| class=&quot;wikitable&quot;<br /> ! colspan=&quot;6&quot; |UNITS BUILT PRIOR TO SEPTEMBER, 2014<br /> |-<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> ! colspan=&quot;6&quot; |UNITS BUILT SEPTEMBER, 2014 TO DECEMBER, 2014<br /> |-<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW0305<br /> |BOLT-HHCS-1/4-20 X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |7<br /> |43058004<br /> |PLATE-SPACER<br /> |<br /> |<br /> |1<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> ! colspan=&quot;6&quot; |UNITS BUILT DECEMBER, 2014 TO PRESENT<br /> |-<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |2<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |}<br /> ''NOTE: Effectivity dates refer to dates new extractor units shipped from the factory. Replacement part effectivity may differ due to factory inventory levels at time of parts order. Consult factory if unsure of parts needed.''<br /> <br /> ==== '''''&lt;big&gt;Components&lt;/big&gt;''''' ====<br /> [[File:BE-TS Cross Port Relief Components.png|alt=BE-TS Cross Port Relief Components|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0262<br /> |VALVE-CROSS PORT RELIEF<br /> |<br /> |''Includes cartridges''<br /> |1<br /> |-<br /> |2<br /> |43046002<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''For Item 1''<br /> |A/R<br /> |-<br /> |3<br /> |H1540<br /> |ADAPTER-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |H1507<br /> |ADAPTER-#8 JICM X #8 MNPT<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |HC0239<br /> |VALVE-ADJUSTABLE FLOW CONTROL<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |H1568<br /> |ADAPTER-45 DEG-#8 JICM X #8 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |H1646<br /> |ADAPTER-90 DEG-#8 SAEM X #6 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |H0805<br /> |TEE-#6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HC0273<br /> |REGULATOR-FIXED FLOW<br /> |<br /> |''7.0 GPM''<br /> |4<br /> |-<br /> |11<br /> |H1501<br /> |ADAPTER-#8 JICM X #6 MNPT<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Floor Drive Cutout&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Floor Drive Cutout.png|alt=BE-TS Floor Drive Cutout|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |SOLENOID-DRIVE CUTOUT<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |7<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |BI0001<br /> |NIPPLE-CLOSE-#8 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |N/A<br /> |SOLENOID-DRIVE CUTOUT<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |10<br /> |YE0501<br /> |CONNECTOR-SOLENOID<br /> |<br /> |''DIN 43650''<br /> |1<br /> |-<br /> |11<br /> |43058004<br /> |PLATE-SPACER<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |HC0278-TS/QS<br /> |SOLENOID-DRIVE CUTOUT<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |H1547<br /> |ADAPTER-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |H1612<br /> |ADAPTER-90 DEG-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Part obsolete. Must be replaced with Retro Kit Part # 80242007.''<br /> |-<br /> | colspan=&quot;6&quot; |''NOTE: Effectivity dates refer to dates new extractor units shipped from the factory. Replacement part effectivity may differ due to factory inventory levels at time of parts order. Consult factory if unsure of parts needed.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Counter Balance Valve&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Counter Balance Valve.png|alt=BE-TS Counter Balance Valve|frameless|554x554px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0263<br /> |VALVE-COUNTER BALANCE<br /> |<br /> |<br /> |1<br /> |-<br /> |1a<br /> |43046004<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''† For Item 1 (Not shown)''<br /> |A/R<br /> |-<br /> |2<br /> |H1615<br /> |ADAPTER-90 DEG-#6 JICM X #6 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |H1552<br /> |ADAPTER-#6 JICM X #6 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0305<br /> |BOLT-HHCS-1/4-20 X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Cartridges are for replacement only''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Transition Plate&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Transition Plate.png|alt=BE-TS Transition Plate|frameless|576x576px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817067-2<br /> |PLATE-TRANSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |H0020<br /> |UNION-BULKHEAD-45 DEG-#6 JICM<br /> |<br /> |<br /> |8<br /> |-<br /> |3<br /> |H0021<br /> |NUT-BULKHEAD-#6 JIC<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Return Line Manifold&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Return Line Manifold.png|alt=BE-TS Return Line Manifold|frameless|555x555px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43847001<br /> |MANIFOLD-RETURN LINE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |H1501<br /> |ADAPTER-#8 JICM X #6 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1503<br /> |ADAPTER-#12 JICM X #12 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |43817069-2<br /> |BRACKET-BULKHEAD<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |H0015<br /> |UNION-BULKHEAD-90 DEG-#12 JICM<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H0016<br /> |NUT-BULKHEAD-#12 JIC<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;EQ Chain Hose Guard&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS EQ Chain Hose Guard.png|alt=BE-TS EQ Chain Hose Guard|frameless|577x577px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43017074-2<br /> |GUARD-HOSE-EQ CHAIN<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Used on units manufactured after May 2015.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Hydraulic Schematics&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Hydraulic Schematic.png|alt=BE-TS Hydraulic Schematic|frameless|1180x1180px]]<br /> <br /> ==== '''''&lt;big&gt;Extended Reach Hydraulic Schematics&lt;/big&gt;''''' ====<br /> [[File:BE-TS Hydraulic Schematic Extended Reach.png|alt=BE-TS Hydraulic Schematic Extended Reach|frameless|905x905px]]<br /> <br /> == &lt;big&gt;Standard Available Options&lt;/big&gt; ==<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Strobe &amp; Alarm&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''&lt;big&gt;''[Discontinued] Strobe Light &amp; Stanchion Configuration''&lt;/big&gt;''' ====<br /> [[File:(Discontinued) BE-TS Strobe Light.png|alt=(Discontinued) BE-TS Strobe Light|frameless|722x722px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0317<br /> |STROBE LIGHT<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41215014<br /> |STANCHION<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0401<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |E1010<br /> |RECEPTACLE-TWIST LOCK<br /> |<br /> |''(Not shown)''<br /> |1<br /> |-<br /> |7<br /> |E1011<br /> |PLUG-TWIST LOCK<br /> |<br /> |''(Not shown)''<br /> |1<br /> |}<br /> <br /> ==== '''&lt;big&gt;''[Discontinued] Audible Alarm Configuration''&lt;/big&gt;''' ====<br /> [[File:(Discontinued) BE-TS Audible Alarm.png|alt=(Discontinued) BE-TS Audible Alarm|frameless|490x490px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0317-A<br /> |AUDIBLE ALARM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0654<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |00117101-2<br /> |MOUNTING BRACKET<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |5<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> ==== '''&lt;big&gt;''[Current] Stack Light Strobe &amp; Alarm Configuration''&lt;/big&gt;''' ====<br /> [[File:(Current) BE-TS Stack Light Strobe and Alarm Configuration.png|alt=(Current) BE-TS Stack Light Strobe and Alarm Configuration|frameless|844x844px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0362<br /> |MOUNTING BASE<br /> |<br /> |''Includes restraints''<br /> |1<br /> |-<br /> |2<br /> |E0365<br /> |TERMINAL BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0363<br /> |STROBE LIGHT-AMBER-120VAC<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |4<br /> |E0364<br /> |AUDIBLE ALARM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |5<br /> |SS0118<br /> |SCREW-SHCS-#8-32 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |SS0303<br /> |WASHER-FLAT-#8<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |SS0203<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |E1010<br /> |RECEPTACLE-TWIST LOCK<br /> |<br /> |''(Not shown)''<br /> |1<br /> |-<br /> |9<br /> |E1011<br /> |PLUG-TWIST LOCK<br /> |<br /> |''(Not shown)''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† For units not equipped with the audible alarm option, a cap (not shown) mounts on top of the strobe light in place of the audible alarm. Cap included with base.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† For units not equipped with the strobe light option, the audible alarm mounts directly to the terminal base in place of the strobe light.'' <br /> |}<br /> <br /> ==== '''&lt;big&gt;''Strobe &amp; Alarm Mounting''&lt;/big&gt;''' ====<br /> [[File:BE-TS Strobe and Alarm Mounting.png|alt=BE-TS Strobe and Alarm Mounting|frameless|516x516px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41235060<br /> |STACK LIGHT STANCHION<br /> |<br /> |''Discontinued''<br /> |A/R<br /> |-<br /> |2<br /> |HW0401<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |3<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |4<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |REF<br /> |43032006<br /> |STANCHION ASSEMBLY<br /> |<br /> |''Includes items 5 through 8''<br /> |A/R<br /> |-<br /> |5<br /> |43035003<br /> |STACK LIGHT STANCHION<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43037007-2<br /> |CLAMP BRACKET<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0305<br /> |BOLT-HHCS-1/4-20 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0050<br /> |NUT-FLANGED-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |43037004-2<br /> |MOUNTING BRACKET<br /> |<br /> |''Overhead Guard only''<br /> |1<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Horn&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Horn.png|alt=BE-TS Horn|frameless|565x565px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |YE0308<br /> |BUTTON-HORN<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0317-A<br /> |AUDIBLE ALARM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0654<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |00117101-2<br /> |MOUNTING BRACKET<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |11<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Overhead Guard&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Overhead Guard.png|alt=BE-TS Overhead Guard|frameless|530x530px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817119-2<br /> |GUARD-SIDE<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |2<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0406<br /> |BOLT-HHCS-3/8-16 X 2-1/2&quot;<br /> |<br /> |<br /> |5<br /> |-<br /> |5<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |6<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |<br /> |<br /> |5<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Side Guards used on units built November 2013 to Present. Mounting hardware valid for all units with Removable Overhead Guard.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Operator Sheild&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''&lt;big&gt;''[Current] Operator Shield''&lt;/big&gt;''' ====<br /> [[File:(Current) BE-TS 30 Operator Sheild.png|alt=(Current) BE-TS 30 Operator Sheild|frameless|566x566px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43814025<br /> |OPERATOR SHIELD<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |HC0542<br /> |GASKET EDGING<br /> |<br /> |''(2) @ 38&quot; LG, (1) @ 60&quot; LG''<br /> |136&quot;<br /> |-<br /> |3<br /> |43817116-2<br /> |BRACKET-TOP<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |1412FSW<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |43817117-2<br /> |BRACKET-CENTER SUPPORT-OUTSIDE<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43817118-2<br /> |BRACKET-CENTER SUPPORT-INSIDE<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |SS0114<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |8<br /> |SS0502<br /> |LANYARD-8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |SS0501<br /> |PIN-QUICK RELEASE-3/16&quot; X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Consult factory for units built prior to November 2013 with plexiglass bolted directly to Overhead Guard structure on front and sides.'' <br /> |}<br /> <br /> ==== '''&lt;big&gt;''Operator Shield (Used Prior to November 2013)''&lt;/big&gt;''' ====<br /> [[File:BE-TS Operator Shield (Used Prior to November 2013).png|alt=BE-TS Operator Shield (Used Prior to November 2013)|frameless|559x559px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43717116<br /> |SHIELD-OPERATOR<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |43015010<br /> |FRAME-OPERATOR SHIELD WELDMENT<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43017066-2<br /> |SUPPORT-SIDE<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |43017065-2<br /> |SUPPORT-LOWER<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43017067-2<br /> |SUPPORT-UPPER<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |7<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |32<br /> |-<br /> |8<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |9<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |16<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Consult factory for units with plexiglass bolted directly to frame.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Powered Roller Cutout&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Powered Roller Cutout Photo Eye &amp; Reflector Locations (Prior to May 2022)&lt;/big&gt;''''' ====<br /> [[File:BE-TS Powered Roller Cutout Photo Eye &amp; Reflector Locations.png|alt=BE-TS Powered Roller Cutout Photo Eye &amp; Reflector Locations|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1321A<br /> |PHOTO EYE<br /> |<br /> |''† Polarized''<br /> |1<br /> |-<br /> |2<br /> |41217170-2<br /> |MOUNT-PHOTO EYE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0216<br /> |SCREW-#10-24 X 2&quot;<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |4<br /> |HW0032<br /> |NUT-NILN-#10-24<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |E1321-R<br /> |REFLECTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |41217171<br /> |MOUNT-REFLECTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |SS0803<br /> |SCREW-RHMS-#6-32 X 5/8&quot;<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |8<br /> |SS0125<br /> |BOLT-HHCS-1/4-20 X 5/8&quot;<br /> |<br /> |''††† See notes''<br /> |4<br /> |-<br /> |9<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''Quantities provided are for Single-Sided (PRC-1) Power Roller Cutout option. For units with Double Sided (PRC-2) option, quantities are double.''<br /> |-<br /> | colspan=&quot;6&quot; |''† Polarized Photo Eye recommended to prevent potential operational issues with very smooth or shiny battery cases.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Photo Eye &amp; Reflector mounting screws are trimmed to length.''<br /> |-<br /> | colspan=&quot;6&quot; |''††† Photo Eye &amp; Reflector Bracket Mounting Screws may be required to ground flush to prevent intereferance with guards.''<br /> |}<br /> '''''&lt;big&gt;Powered Roller Cutout Photo Eye &amp; Reflector Locations (May 2022 to Present)&lt;/big&gt;'''''<br /> <br /> [[File:BE-TS Powered Roller Cutout Photo Eye &amp; Reflector Locations (May 2022 to Present).png|alt=BE-TS Powered Roller Cutout Photo Eye &amp; Reflector Locations (May 2022 to Present)|frameless|555x555px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1321A<br /> |PHOTO EYE<br /> |<br /> |''† Polarized''<br /> |1<br /> |-<br /> |2<br /> |13537001-2<br /> |MOUNT-PHOTO EYE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E1321-R<br /> |REFLECTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |41217171<br /> |MOUNT-REFLECTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |SS0803<br /> |SCREW-RHMS-#6-32 X 5/8&quot;<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |PL0506<br /> |GROMMET-SEALING-2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''Quantities provided are for Single-Sided (PRC-1) Power Roller Cutout option. For units with Double Sided (PRC-2) option, quantities are double.''<br /> |-<br /> | colspan=&quot;6&quot; |''† Polarized Photo Eye recommended to prevent potential operational issues with very smooth or shiny battery cases.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Reflector mounting screws are trimmed to length.''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Powered Roller Cutout Mounting&lt;/big&gt;''''' ====<br /> [[File:BE-TS Powered Roller Cutout Mounting.png|alt=BE-TS Powered Roller Cutout Mounting|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0281<br /> |SOLENOID VALVE<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |BI0001<br /> |NIPPLE-CLOSE-#8 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |6<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |7<br /> |H1600<br /> |ADAPTER-90 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |H1546<br /> |ADAPTER-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Powered Roller Cutout Override Button&lt;/big&gt;''''' ====<br /> [[File:BE-TS Powered Roller Cutout Override Button.png|alt=BE-TS Powered Roller Cutout Override Button|frameless|568x568px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ACTUATOR-PUSH BUTTON (DISCONTINUED)<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |N/A<br /> |CONTACT BLOCK-N/C (DISCONTINUED)<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |3<br /> |E0384<br /> |ACTUATOR-PUSH BUTTON<br /> |80932002<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0386<br /> |CONTACT BLOCK-N/C<br /> |80932002<br /> |<br /> |1<br /> |-<br /> |5<br /> |E0387<br /> |DUMMY BLOCK<br /> |80932002<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0388<br /> |PUSH BUTTON-GREEN<br /> |80932002<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''Button location on dash may vary from position shown.''<br /> |-<br /> | colspan=&quot;6&quot; |''† Parts no longer available. Must order new Push-Button Switch Kit 80932002''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Powered Roller Cutout Junction Box&lt;/big&gt;''''' ====<br /> [[File:BE-TS Powered Roller Cutout Junction Box.png|alt=BE-TS Powered Roller Cutout Junction Box|frameless|535x535px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |3<br /> |-<br /> |4<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |4<br /> |-<br /> |5<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |7<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |''Mounting bolts (Not shown)''<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Level Assist&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Level Assist.png|alt=BE-TS Level Assist|frameless|568x568px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1321A<br /> |PHOTO EYE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |13537001-2<br /> |MOUNT-PHOTO EYE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |PL0502<br /> |GROMMET<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43837007<br /> |TARGET ANGLE<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |E0376<br /> |INDICATOR LIGHT<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |7<br /> |HW0152<br /> |WASHER-5/8&quot; I.D.<br /> |<br /> |''†† See notes (Not shown)''<br /> |2<br /> |-<br /> |8<br /> |E1321-RT<br /> |REFLECTIVE TAPE<br /> |<br /> |''(Not shown)''<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''Location of Indicator Light on the dash may vary from location shown''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Extractors built prior to October 2021 used Multi-Piece Indicator Lights with Replaceable Bulb and Lens are no longer available. Current Indicator Light is a 1-Piece LED Assembly. Replacement of any Multi-Piece Component requires replacing entire assembly with current, 1-Piece Indicator Light.''<br /> |-<br /> | colspan=&quot;6&quot; |''††† Washers required for units that did not ship with Level Assist option from the factory.''<br /> |}<br /> '''&lt;big&gt;''Level Assist Junction Box''&lt;/big&gt;'''<br /> <br /> [[File:BE-TS Level Assist Junction Box.png|alt=BE-TS Level Assist Junction Box|frameless|524x524px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |4<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |5<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |''Mounting bolts (Not shown)''<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Blue Light&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Blue Light.png|alt=BE-TS Blue Light|frameless|611x611px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |EW2002B<br /> |BLUE PROJECTION SPOTLIGHT<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW0401<br /> |BOLT-HHCS-3/8-16 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0107<br /> |WASHER-LOCK-3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |4<br /> |-<br /> |5<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43835001<br /> |STANCHION-POWER<br /> |<br /> |<br /> |2<br /> |}<br /> [[File:BE-TS Blue Light Enclosure.png|alt=BE-TS Blue Light Enclosure|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-8&quot; X 8&quot; X 4&quot;<br /> |<br /> |''Consult factory''<br /> |1<br /> |-<br /> |2<br /> |E0135<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |''Blank panel without holes''<br /> |1<br /> |-<br /> |3<br /> |PS5R-SC12<br /> |POWER SUPPLY<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0908<br /> |MOUNTING RAIL<br /> |<br /> |''Sold by length''<br /> |A/R<br /> |-<br /> |5<br /> |YE0402<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |YE0405<br /> |END BARRIER<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |YE0406<br /> |END ANCHOR<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |E0341<br /> |GROUND LUG<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |3<br /> |-<br /> |10<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |11<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |''2 per Mounting Rail''<br /> |5<br /> |-<br /> |12<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |''2 per Mounting Rail''<br /> |5<br /> |-<br /> |13<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |''2 per Mounting Rail''<br /> |5<br /> |-<br /> |14<br /> |00196404<br /> |LABEL-DANGER<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Water Cart&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Water Cart.png|alt=BE-TS Water Cart|frameless|549x549px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PB0033<br /> |OVERFILL INDICATOR<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |PB0034<br /> |LOCKNUT-CONDUIT-2&quot;-NYLON<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0308<br /> |FILLER/BREATHER ASSEMBLY<br /> |<br /> |Includes gaskets<br /> |1<br /> |-<br /> |4<br /> |HW0209<br /> |SCREW-RHMS-10-32 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |5<br /> |550-057<br /> |HOSE-FILL-3/4&quot; X 15'<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |550-027<br /> |ON/OFF VALVE<br /> |<br /> |''(Not shown)''<br /> |1<br /> |-<br /> |7<br /> |PB0902<br /> |HOSE-3/4&quot;<br /> |<br /> |<br /> |30&quot;<br /> |-<br /> |8<br /> |HW1018<br /> |HOSE CLAMP-3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |PB0603<br /> |ADAPTER-3/4&quot; NPT X 3/4&quot; BARB<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |PB0456<br /> |ELBOW-STR-90 DEG-3/4&quot; NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |PB0451<br /> |ADAPTER-3/4&quot; NPT X 3/4 GHT<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |PB0302<br /> |PLUG-3/4&quot; NPT<br /> |<br /> |<br /> |<br /> |-<br /> |13<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |14<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |SS0106<br /> |SHCS-#10-24 X 1/2&quot;-SST<br /> |<br /> |<br /> |6<br /> |-<br /> |16<br /> |SS0114<br /> |BHSCS-#10-24 X 1/2&quot; SST<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |SS0301<br /> |WASHER-FLAT-#10-SAE-SST<br /> |<br /> |<br /> |10<br /> |-<br /> |18<br /> |00196701<br /> |DECAL-BHS-12&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |00196404<br /> |LABEL-DANGER-&quot;120 VOLTS&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |20<br /> |00166648<br /> |LABEL, NON-POTABLE<br /> |<br /> |<br /> |1<br /> |-<br /> |21<br /> |HW0418<br /> |BOLT-HHCS-3/8-16 X 2-1/4&quot;<br /> |<br /> | rowspan=&quot;3&quot; |''Mounting bolts'' <br /> <br /> ''(Not shown)''<br /> |2<br /> |-<br /> |22<br /> |HW0031<br /> |NUT-HEX-3/8-16 CENTERLOCK<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |2<br /> |}<br /> [[File:BE-TS Water Cart 2.png|alt=BE-TS Water Cart|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1511<br /> |SWITCH-ROCKER<br /> |<br /> |Submersible rated<br /> |1<br /> |-<br /> |2<br /> |E0378<br /> |INDICATOR LIGHT-120VAC-GREEN<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |3<br /> |E0376<br /> |INDICATOR LIGHT-120VAC-AMBER<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |4<br /> |E0377<br /> |INDICATOR LIGHT-120VAC-RED<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |5<br /> |46917015<br /> |PLACARD-INDICATOR LIGHT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0505<br /> |16-3 SO CORD<br /> |<br /> |<br /> |72&quot;<br /> |-<br /> |7<br /> |E0653<br /> |PLUG-120V/15A<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |9<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |PL0501<br /> |GROMMET-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |E1313<br /> |SOCKET-RELAY-8 PIN<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |E0331<br /> |RELAY-DPDT-110VAC<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |E0440<br /> |TERMINAL BLOCK-8 POLE<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |E1070<br /> |GROUND BAR-4 POSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |HW0139<br /> |SCREW-RHMS-#8-32 X 1 1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |HW0135<br /> |SCREW-RHMS-#8-32 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW1061<br /> |SCREW-RHMS-#8-32 X 1&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |5<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Water carts built prior to October 2021 used Multi-Piece Indicator Lights with Replaceable Bulb and Lens and are no longer available. Current Indicator Lights are a 1-Piece LED Assemblly.'' <br /> <br /> ''Replacement of any Mutli-Piece component requires replacing entire assembly with current 1-Piece Indicator Light.'' <br /> |}<br /> [[File:BE-TS Water Cart 02.png|alt=BE-TS Water Cart 02|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1511<br /> |SWITCH-ROCKER<br /> |<br /> |''Submersible rated''<br /> |1<br /> |-<br /> |2<br /> |E0378<br /> |INDICATOR LIGHT-120VAC-GREEN<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |3<br /> |E0376<br /> |INDICATOR LIGHT-120VAC-AMBER<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |4<br /> |E0377<br /> |INDICATOR LIGHT-120VAC-RED<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |5<br /> |46917015<br /> |PLACARD-INDICATOR LIGHT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0505<br /> |16-3 SO CORD<br /> |<br /> |<br /> |72&quot;<br /> |-<br /> |7<br /> |E0653<br /> |PLUG-120V/15A<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |9<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |PL0501<br /> |GROMMET-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |E1313<br /> |SOCKET-RELAY-8 PIN<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |E0331<br /> |RELAY-DPDT-110VAC<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |E0440<br /> |TERMINAL BLOCK-8 POLE<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |E1070<br /> |GROUND BAR-4 POSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |HW0139<br /> |SCREW-RHMS-#8-32 X 1 1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |HW0135<br /> |SCREW-RHMS-#8-32 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW1061<br /> |SCREW-RHMS-#8-32 X 1&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |5<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Water carts built prior to October 2021 used Multi-piece Indicator Lights with replaceable bulb and lens and are no longer available. Current Indicator Light s are a 1-piece LED assembly with Current, 1-Piece Indicator Light''<br /> |}<br /> <br /> = &lt;big&gt;Service &amp; Maintenance&lt;/big&gt; =<br /> <br /> == &lt;big&gt;Daily Inspection List&lt;/big&gt; ==<br /> The points listed below should be visually inspected daily prior to initial start up of the Battery Extractor to ensure safe and proper operation of the unit and to help avoid unnecessary down time.<br /> <br /> # Walk around unit and inspect for any physical damage to machine not previously noted.<br /> # Verify all guards are in place.<br /> # Inspect the AC power feed for any damage.<br /> # Vacuum equipped units: Inspect vacuum cups for damage to cup sealing surface, backup casting, and vacuum hoses. Magnet equipped units: Inspect magnets for damage to attachment face, proximity sensor cover, cables and connections.<br /> # Inspect travel path and area around unit for any hydraulic oil that could be a potential repair/maintenance issue and/or safety hazard.<br /> # Check oil level in hydraulic reservoir at fill level gauge.<br /> # Check that operator safety gate and all safety switches are in proper working order.<br /> # Verify extractor path is free of obstructions.<br /> # Check roller beds for any debris and clean as required.<br /> # Board unit, engage system and verify all functions are operating properly and that no abnormal or unusual noises are present.<br /> <br /> ''* Use form IF-5008 when preforming daily inspections''<br /> <br /> == &lt;big&gt;Operator's Daily Checklist&lt;/big&gt; ==<br /> [[File:BE-TS Operator's Daily Checklist.png|alt=BE-TS Operator's Daily Checklist|frameless|1180x1180px]]<br /> <br /> == &lt;big&gt;Recommended Battery Extractor Lubrication Intervals&lt;/big&gt; ==<br /> {| class=&quot;wikitable&quot;<br /> !Lubrication Task<br /> !'''# of Places'''<br /> !Intervals<br /> |-<br /> |'''1. Lubricate grease fittings using #2 lithium based grease'''<br /> |<br /> |<br /> |-<br /> |A. Extractor arm drive nut and carrier bearings<br /> |5 places<br /> |50 hrs / Weekly<br /> |-<br /> |B. Idler casters<br /> |2 places<br /> |200 hrs / Weekly<br /> |-<br /> |'''2. Wipe off and lubricate chains using light machine oil'''<br /> |<br /> |<br /> |-<br /> |A. #80 Lift chains (Not applicable to BE-SL units)<br /> |4 places<br /> |200 hrs / Monthly<br /> |-<br /> |B. #60 Equalization chains<br /> |4 places<br /> |200 hrs / Monthly<br /> |-<br /> |C. #35 Powered roller chains<br /> |8 places<br /> |200 hrs / Monthly<br /> |-<br /> |'''3. Change return line hydraulic fluid filter'''<br /> ''(Oil filtration of at least 20 microns is recommended)''<br /> |1 place<br /> |300 hrs / Twice Quarterly<br /> |-<br /> |'''4. Change hydraulic fluid'''<br /> | -<br /> |600 hrs / Quarterly *<br /> |-<br /> |'''5. Complete preventative maintenance (PM)'''<br /> Use form IF-5029 for Vacuum equipped units.<br /> <br /> Use form IF-5028 for Magnet equipped units.<br /> | -<br /> |600 hrs / Quarterly<br /> |-<br /> ! colspan=&quot;3&quot; |NOTES<br /> |-<br /> | colspan=&quot;3&quot; |''These recommendations are based on average use in a typical warehouse environment and may be adjusted based on specific circumstances. Dusty and/or extreme hot/cold environments may require more frequent lubrication.''<br /> |-<br /> | colspan=&quot;3&quot; |''* BHS recommends implementing an oil sampling and analysis program to monitor hydraulic fluid condition and determine when hydraulic fluid changes are required. The fluid analysis program should be a continuous process and all results should be evaluated. Changes in the condition of the hydraulic system may indicate component wear, fluid deterioration and/or contamination.''<br /> |}<br /> {|<br /> |[[File:NOTICE-warn.png|alt=NOTICE|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:NOTICE-warn.png]]<br /> |<br /> *'''The mounted bearings used on the power rollers, equalization shafts, drive wheels, and drive screw are sealed and shielded bearings. Lubrication may breach the seals of these bearings, therefore these bearings should not be lubricated unless the machine has been cleaned with a high pressure wash on a regular basis (not recommended).'''<br /> *'''Hydraulic fluid should not exceed 140°F (60°C) for extended periods.'''<br /> |}<br /> ===&lt;big&gt;'''&lt;u&gt;Reservoir Capacities ''(APPROX.)''&lt;/u&gt;'''&lt;/big&gt;===<br /> {|<br /> |BE-SL<br /> |18 gal (68 L)<br /> |-<br /> |BE-DS<br /> |18 gal (68 L)<br /> |-<br /> | rowspan=&quot;2&quot; |BE-TS<br /> |30 gal (114 L) ''(Units built Pre-2014)''<br /> |-<br /> |45 gal (170 L) ''(Units built 2014 to Present)''<br /> |-<br /> |BE-QS<br /> |60 gal (227 L)<br /> |}The reservoir should be filled so fluid level is within a half inch (1/2&quot;) of the top of sight glass. Use Chevron AW 68 or equivalent ISO 68 grade hydraulic oil with anti-wear additives and foam suppressant.<br /> <br /> '''''NOTE'':''' Some units shipped from the factory with AW 32 oil for cold environment operation. Units using AW 32 from the factory may experience poor performance if AW 68 is used instead of AW 32 due to the increased viscosity of the oil.<br /> <br /> ==&lt;big&gt;Preventative Maintenance Reports&lt;/big&gt;==<br /> ===&lt;big&gt;&lt;u&gt;Vacuum Extraction&lt;/u&gt;&lt;/big&gt;===<br /> [[File:Battery Extractor Series - Vacuum Extraction Planned Maintenance Inspection Report Page 1.png|alt=Battery Extractor Series - Vacuum Extraction Planned Maintenance Inspection Report Page1|frameless|1238x1238px|link=https://tech.bhs1.com/index.php/File:Battery_Extractor_Series_-_Vacuum_Extraction_Planned_Maintenance_Inspection_Report_Page_1.png]]<br /> <br /> [[File:Battery Extractor Series - Vacuum Extraction Planned Maintenance Inspection Report page2.png|alt=Battery Extractor Series - Vacuum Extraction Planned Maintenance Inspection Report Page 2|frameless|1230x1230px|link=https://tech.bhs1.com/index.php/File:Battery_Extractor_Series_-_Vacuum_Extraction_Planned_Maintenance_Inspection_Report_page2.png]]<br /> ===&lt;big&gt;&lt;u&gt;Magnet Extraction&lt;/u&gt;&lt;/big&gt;===<br /> [[File:Battery Extractor Series - Magnet Extraction Planned Maintenance Inspection Report Page 1.png|alt=Battery Extractor Series - Magnet Extraction Planned Maintenance Inspection Report Page 1|frameless|1224x1224px|link=https://tech.bhs1.com/index.php/File:Battery_Extractor_Series_-_Magnet_Extraction_Planned_Maintenance_Inspection_Report_Page_1.png]]<br /> <br /> [[File:Battery Extractor Series - Magnet Extraction Planned Maintenance Inspection Report Page 2.png|alt=Battery Extractor Series - Magnet Extraction Planned Maintenance Inspection Report Page 2|frameless|1233x1233px|link=https://tech.bhs1.com/index.php/File:Battery_Extractor_Series_-_Magnet_Extraction_Planned_Maintenance_Inspection_Report_Page_2.png]]<br /> <br /> ==&lt;big&gt;80292002-i – Equalization Chain Installation / Resetting Procedure&lt;/big&gt;==<br /> ===&lt;big&gt;&lt;u&gt;Required Tools&lt;/u&gt;&lt;/big&gt;===<br /> *Large standard screwdriver<br /> *1/8&quot;, 5/32&quot;, 3/16&quot; Allen wrench<br /> *(2) 1-1/8&quot; Open-end wrenches<br /> *Needle nose pliers<br /> *6&quot; Steel scale (ruler)<br /> *Brake cleaner (non-chlorinated)<br /> *Loctite #242 (blue)<br /> *80292002 - E.Q. Adjustment stop kit (SL, DS, TS) or 80492001 - BE-QS E.Q. Adjustment stop kit<br /> *Ladder or work platform ''(see notes)''<br /> ===&lt;big&gt;&lt;u&gt;''Optional Tools''&lt;/u&gt;&lt;/big&gt;===<br /> *Wire brush for removing Loctite from components prior to reassembly<br /> ===&lt;big&gt;&lt;u&gt;Notes&lt;/u&gt;&lt;/big&gt;===<br /> *''A ladder, man lift or other device is required to access the upper E.Q. studs on BE-TS and BE-QS units.''<br /> *''The following procedures must be performed with the extractor unloaded and in a level area of the travel path.''<br /> *''Installation of the E.Q. stop kit requires (4) persons plus a trained battery extractor operator to raise and lower the inner carriage.''<br /> *''It is recommended to have new E.Q. chain connecting links on hand prior to performing the following procedures.''<br /> *''The upper E.Q. stud lock washers cannot be reused and must be replaced prior to reassembly.''<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Page 369 Image 0001.png|alt=BE-TS with EQ Adjustment Stops Installed|none|thumb|300x300px|BE-TS with EQ Adjustment Stops Installed|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Page_369_Image_0001.png]]<br /> ===&lt;big&gt;&lt;u&gt;IMPORTANT&lt;/u&gt;&lt;/big&gt;===<br /> *'''Read and understand the Safety and De-energization Procedure TP-606 before starting this procedure.'''<br /> *'''Read and understand these instructions completely before starting this procedure.'''<br /> ===&lt;big&gt;&lt;u&gt;Procedure&lt;/u&gt;&lt;/big&gt;===<br /> 1. Remove the inner and outer frame guards to access the lower equalization studs.<br /> <br /> 2. Raise the inner frame approximately 30&quot; (762 mm) for SL, DS and TS units or 50&quot; (1270 mm) for QS units from the fully lowered position. Install (1) adjustment stop at each corner of the roller bed. See Figure 1.[[File:IOP-400 BE-SL&amp;DS (10-23) EQ Chain Instructions-Figure1.png|alt=|none|thumb|375x375px|FIGURE 1|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_EQ_Chain_Instructions-Figure1.png]]3. Slowly lower the inner carriage until the roller bed is firmly and securely seated against all four stops. See Figure 2.[[File:IOP-400 BE-SL&amp;DS (10-23) Page 370 Image 0002.png|alt=Roller bed firmly seated against all four stops|none|thumb|398x398px|FIGURE 2|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Page_370_Image_0002.png]]4. Lockout/tagout the B.E. per your corporate policy.<br /> <br /> 5. De-energize the B.E. per BHS Safety and De-energization procedure TP-606.<br /> <br /> 6. Loosen and remove the upper hex nuts and remove the upper chain studs. Remove the lock washers from the upper chain studs. Save the hex nuts for reassembly later. Discard the lock washers and obtain new, 3/4&quot; split-ring lock washers for reassembly.<br /> <br /> 7. If replacing the chain, remove the upper stud and remove the chain from the lower stud. Discard the connecting links.<br /> *''If the E.Q. chains are being reset due to a connecting link failure, it is recommended to also replace the stud where the connecting link failed.''<br /> *''It is recommended to replace the connecting links when replacing or resetting the E.Q. chains.''<br /> 8. If replacing a lower stud, remove the connecting link and disconnect the chain. Loosen the hex nut and remove the stud. Remove the hex nut from the old stud and reinstall it on the new stud. Reinstall the new stud so that it is flush with the bottom of the frame and the hole is aligned front-to-back with the extractor.<br /> <br /> 9. Attach the chains to the lower studs using the connecting links. Attach the upper studs to the chains using the connecting links, making sure the nut is threaded down near the connecting link and lay the chains in the frame. See Figure 3.<br /> *''Do not fully assemble the lower connecting links by bending the cotter pins as the connecting link may need to be removed later for stud adjustment.''[[File:IOP-400 BE-SL&amp;DS (10-23) EQ Chain Attached to Upper Stud.png|alt=BE-TS Chain Attached to Upper Stud|none|thumb|300x300px|FIGURE 3|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_EQ_Chain_Attached_to_Upper_Stud.png]]<br /> 10. If new E.Q. sprockets are to be installed, remove the clamp collars and old sprockets. Install the new sprockets and reinstall the clamp collars. DO NOT tighten the set screws at this point as adjustment/alignment may be required.<br /> *''Sprockets MUST be keyed in-line.''<br /> 11. Align the E.Q. shafts so that the keyways are in the 2 o'clock position (approximately 60 degrees from vertical). This will bring the sprocket set screws to the top of the sprocket when the inner carriage is lowered. See Figure 4.[[File:IOP-400 BE-SL&amp;DS (10-23) EQ Shafts aligned 60 Degrees from Vertical.png|alt=BE-TS EQ Shafts aligned 60 Degrees from Vertical|none|thumb|300x300px|FIGURE 4|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_EQ_Shafts_aligned_60_Degrees_from_Vertical.png]]12. Starting with the inside chain, route the chain over the sprocket directly above the lower stud and under the inside sprocket on the opposite shaft. Attach the upper stud to the top cross bar, making sure a new 3/4&quot; split -ring lock washer is installed between the cross bar and lower hex nut. Hand tighten the upper stud adjusting nut to remove slack from the chain. See Figure 5.<br /> <br /> 13. Route the outer chain over the sprocket, above the stud and under the sprocket on the opposite shaft. Attach the upper stud to the top cross bar, making sure a new, 3/4&quot; split-ring lock washer is installed between the cross bar and lower hex nut. Hand tighten the upper stud adjusting nut to remove slack from the chain. See Figure 5.<br /> *''It is recommended to begin at the operator end where room is limited allowing easier access at the opposite end to route the chain under the final sprocket.''<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Inside and Outside EQ Chains.png|alt=BE-TS Inside and Outside EQ Chains|none|thumb|499x499px|FIGURE 5|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Inside_and_Outside_EQ_Chains.png]]14. Repeat steps 11 through 13 for the opposite side of the extractor. It is likely that a large, standard screwdriver will be necessary to position the final chain over the sprocket. See Figure 6.[[File:IOP-400 BE-SL&amp;DS (10-23) Page 371 Image 0002.png|alt=It is likely that a large, standard screwdriver will be necessary to position the final chain over the sprocket.|none|thumb|300x300px|FIGURE 6|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Page_371_Image_0002.png]]15. Adjust the lower studs up or down as necessary to take the slack out of the chain between the lower studs and the sprockets by removing the connecting link from the stud and turning the stud. Tighten the hex nuts against the frame once the studs have been adjusted. Reattach the chain.<br /> *DO NOT allow the stud to twist when tightening the hex nuts.<br /> 16. Tighten the upper hex nut on the upper studs until there is approximately 1/4&quot; (7 mm) of total deflection in the middle of the upper, vertical chain sections. Tighten the lower hex nuts on the upper studs to lock the studs in place.<br /> *''Each section of chain between the sprockets should have approximately the same tension as the other on the same side. See Figure 5.''<br /> 17. Raise the inner frame and remove the adjustment stops from the four corners and lower the inside frame.<br /> <br /> 18. Verify equalization sprocket and stud alignment by using a 6&quot; scale. Measure the distance from the inside roller bed frame to the center of the equalization stud. Compare this distance with the measurements from the inside roller bed frame to the center-lines of the sprockets. Adjust the position of the sprocket as necessary to make the distances equal. This will ensure the chain and sprockets are in line with the stud. Repeat this process for the three remaining chains. See Figures 7 &amp; 8.<br /> <br /> 19. Raise and lower the inner frame several times and listen for any chain popping noises to confirm the sprockets are in line with the lower studs. If there is no popping noise, lower the inner frame all the way down.[[File:IOP-400 BE-SL&amp;DS (10-23) EQ Chain Verify equalization sprocket and stud alignment by using a 6in scale-Fig7.png|alt=BE-TS EQ Chain Procedure Figure 7 - Verify equalization sprocket and stud alignment by using a 6&quot; scale|none|thumb|300x300px|FIGURE 7|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_EQ_Chain_Verify_equalization_sprocket_and_stud_alignment_by_using_a_6in_scale-Fig7.png]][[File:IOP-400 BE-SL&amp;DS (10-23) EQ Chain Verify equalization sprocket and stud alignment by using a 6in scale-Fig8.png|alt=BE-TS EQ Chain Verify equalization sprocket and stud alignment by using a 6in scale - Fig 8|none|thumb|300x300px|FIGURE 8|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_EQ_Chain_Verify_equalization_sprocket_and_stud_alignment_by_using_a_6in_scale-Fig8.png]]20. Clean any existing, hardened Loctite from the sprockets, sprocket sets screws, clamp collars and clamp collar bolts.<br /> <br /> 21. Apply Loctite to and tighten the set screws on the sprockets. Slide the clamp collars against the outside sprocket, loctite and tighten the clamp collars.<br /> ==&lt;big&gt;80292001-i – Battery Extractor Service Stand Installation Instructions&lt;/big&gt;==<br /> ===&lt;big&gt;&lt;u&gt;Required Tools&lt;/u&gt;&lt;/big&gt;===<br /> None<br /> ===&lt;big&gt;&lt;u&gt;Notes&lt;/u&gt;&lt;/big&gt;===<br /> *''Refer to kit part # 80292001 or 80392001 for the complete bill of materials supplied.''<br /> *''Remove ALL batteries from extractor prior to installation / service.''<br /> *''Installation of service stands requires (2) persons plus a trained battery extractor operator to raise and lower the inner carriage. DO NOT attempt installation with less than (3) persons.''<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Single Level Service Stand Properly Installed.png|alt=Single Level Service Stand Properly Installed|none|thumb|368x368px|Single Level Service Stand Properly Installed|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Single_Level_Service_Stand_Properly_Installed.png]]<br /> ===&lt;big&gt;&lt;u&gt;IMPORTANT&lt;/u&gt;&lt;/big&gt;===<br /> *'''Read and understand the Safety and De-energization Procedure TP-606 before starting this procedure.'''<br /> *'''Read and understand these instructions completely before starting this procedure.'''<br /> ===&lt;big&gt;&lt;u&gt;Procedure&lt;/u&gt;&lt;/big&gt;===<br /> 1. Have a qualified operator raise the inner carriage of the extractor to the required height for installation. For single level applications, the required height will be approximately 25&quot; (64 cm) from the fully lowered position. For double, triple, and quad stack machines, the required height will be approximately 55&quot; (140 cm) from the fully lowered position.<br /> *On double, triple, and quad stack battery extractors, the operator either must remain on the operator platform during service or be provided an OSHA approved method of egress. This is not applicable to single level battery extractors as the operator platform height is fixed.<br /> 2. Install the stands by engaging the top of the stand into the inner carriage cutouts. Place the bottom channel of the stand over the tube of the outer frame. The top flanges of each stand are tapered to aid in proper alignment of the stand with the inner frame.<br /> <br /> See Figures 1 &amp; 2.[[File:IOP-400 BE-SL&amp;DS (10-23) engaging the top of the stand into the inner carriage cutout.png|alt=Properly seated in cutout|none|thumb|300x300px|FIGURE 1|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_engaging_the_top_of_the_stand_into_the_inner_carriage_cutout.png]][[File:IOP-400 BE-SL&amp;DS (10-23) Page 374 Image 0005.png|none|thumb|300x300px|FIGURE 2|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Page_374_Image_0005.png]]3. Once BOTH stands have been properly placed, SLOWLY lower the inner carriage while the stands are held in place.<br /> <br /> 4. Once the inner carriage is firmly seated on the service stands, verify the stands are securely installed. See Figure 3.[[File:IOP-400 BE-SL&amp;DS (10-23) Page 374 Image 0006.png|none|thumb|450x450px|FIGURE 3|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Page_374_Image_0006.png]]<br /> ==&lt;big&gt;Trouble Shooting Guide&lt;/big&gt;==<br /> {| class=&quot;wikitable&quot;<br /> !Problem Symptom<br /> !Probable Cause<br /> !Solution<br /> |-<br /> |Hydraulic power Unit does not operate.<br /> No electric to power unit motor.<br /> |1. No AC power to Unit.<br /> 2. Reset on magnetic motor starter tripped.<br /> <br /> 3. Gate switch not actuated.<br /> <br /> 4. Foot Pedal switch not engaged.<br /> <br /> 5. Emergency Stop switch is depressed.<br /> |1. Check fuses or breaker.<br /> 2. Check reset button.<br /> <br /> 3. Make sure safety gate is engaging switch.<br /> <br /> 4. Check foot pedal for obstruction.<br /> <br /> 5. Reset button using machine key.<br /> |-<br /> |Power unit runs but no pressure reading at gauge,<br /> also no functions move.<br /> |1. AC input is in reverse phase. Motor is running backwards.<br /> 2. Main system relief valve stuck open or defective.<br /> <br /> 3. Coupling between motor and pump loose.<br /> |1. Reverse any two of the three hot lines to unit.<br /> 2. Check relief valve cartridge for trash or debris.<br /> <br /> Replace as required.<br /> <br /> 3. Inspect coupling assy.<br /> |-<br /> |Magnetic starter contact chatters-at startup.<br /> Contact chatters while traveling.<br /> |1. 1 leg of 3 phase input power out.<br /> 2. Safety gate and/or gate switch out of adjustment.<br /> |1. Check fuse or circuit breaker at service panel.<br /> 2. Check and adjust gate or switch as required to<br /> <br /> ensure full engagement of plunger on gate<br /> <br /> switch and that the safety gate is not bouncing<br /> <br /> due to vibration.<br /> |-<br /> |No floor travel empty or loaded-all other functions work properly.<br /> |1. Extractor arm off center-left to right.<br /> 2. Proximity switch or sensing bracket out of target range.<br /> <br /> 3. Proximity switch defective or broken.<br /> <br /> 4. Bad solenoid coil on floor cutout valve.<br /> <br /> 5. Spool on floor cutout valve stuck open.<br /> |1. Center arm.<br /> 2. Adjust as needed to achieve 1/4” clearance.<br /> <br /> 3. Check switch and replace.<br /> <br /> 4. Check solenoid and replace if needed.<br /> <br /> 5. Remove and clean spool cartridge or replace.<br /> |-<br /> |Floor travel moves but is sluggish<br /> and stalls with a load at certain points.<br /> |1. Uneven floor conditions. High/low spots.<br /> 2. Excessive tire wear.<br /> <br /> 3. Wheel shaft-to-motor shaft coupling on drive wheel assembly loose or broken.<br /> <br /> 4. Debris lodged under battery extractor.<br /> |1. Check flatness of floor. Check guidance track for scraping of guide arm on top of angle.<br /> 2. Measure under clearance of battery extractor. Should be no less than 5/8” replace poly wheels as needed.<br /> <br /> 3. Inspect drive assembly while under load to see if shafts and couplings are moving in unison. Repair as needed.<br /> <br /> 4. Inspect under unit and remove debris.<br /> |-<br /> |Inner carriage bounces while lifting under load,<br /> but not when empty.<br /> |1. Down speed adjustment valve open too far.<br /> |1. Adjust as needed to eliminate carriage bounce.<br /> |-<br /> |Inner carriage does not lift evenly.<br /> Four corners do not land evenly against outer frame tube.<br /> |1. Equalization chains are out of adjustment.<br /> 2. Excessive chain or sprocket wear.<br /> <br /> 3. Equalization chains are out of synchronization. Possibly may have jumped a sprocket tooth.<br /> <br /> 4. Broken bearing housing on mounted shaft.<br /> <br /> 5. Lift cylinder roping chains out of adjustment.<br /> |1. Readjust with the top stud until equal tension is achieved.<br /> 2. Replace as needed.<br /> <br /> 3. Evaluate and resynchronize as required.<br /> <br /> 4. Inspect and replace.<br /> <br /> 5. Readjust as needed to equal tension on all four cylinders in full down position.<br /> |}<br /> =&lt;big&gt;Aftermarket Support&lt;/big&gt;=<br /> [https://na.bhs1.com/blog/post/tt-922-technical-support Click here] for details on BHS' Aftermarket Support.<br /> =&lt;big&gt;Statement of Warranty&lt;/big&gt;=<br /> [https://store.bhs1.com/warranty Click here] for details on BHS' Statement of Warranty.</div>

Kperrier https://tech.bhs1.com/index.php?title=File:BE-TS_Water_Cart_02.png&diff=7673 2024-04-02T17:21:55Z

<p>Kperrier: </p> <hr /> <div>BE-TS Water Cart 02</div>

Kperrier https://tech.bhs1.com/index.php?title=(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)&diff=7672 2024-04-02T17:15:17Z

<p>Kperrier: /* Top Module Junction Box */</p> <hr /> <div>'''Looking for a specific replacement part?''' Ctrl-F (or Command-F for Mac users) brings up your browsers search panel and can search any text on the entire web page. Find parts by searching a part # or part description.<br /> <br /> '''Register your equipment with [https://na.bhs1.com/media-library/bhs-optima/ BHS Optima], BHS's free app.'''<br /> <br /> '''California Residents''': WARNING: This product contains chemicals known to the State of California to cause cancer and/or reproductive harm, and birth defects or other reproductive harm. [https://na.bhs1.com/about-bhs/compliance-statement-for-california-proposition-65/ Learn more here.]<br /> =&lt;big&gt;Preface&lt;/big&gt;=<br /> =&lt;big&gt;TP-606 – Safety &amp; De-Energization Procedures&lt;/big&gt;=<br /> ==&lt;big&gt;General Safety&lt;/big&gt;==<br /> {|<br /> |[[File:Read Before Operating Notice.png|alt=Read Before Operating|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:Read_Before_Operating_Notice.png]]<br /> |<br /> *Read and understand all instructions and warnings before using or servicing this equipment.<br /> *Keep these instructions for future reference.<br /> |}<br /> *Battery Extractor (BE) units shall only be operated by suitable persons of at least 18 years of age, who have been trained in the proper and safe operation of the BE and expressly certified/charged, in writing, by the user or their representative.<br /> *Only one person is permitted to travel on the BE at any time.<br /> *BE units shall only be used indoors in an industrial setting on a hard, nonslip, and level floor without defects including but not limited to holes, gouges, cracks, drains or obstacles comprised of concrete or other suitable industrial material meeting the minimum requirements specified by BHS as well as any local requirements.<br /> *A licensed structural engineer should be consulted prior to installing a BE on any building level other than the ground floor.<br /> *BE units are not designed to be shipped or transported after initial delivery.<br /> *Failure to follow these instructions and warnings may result in property damage, personal injury or death.<br /> ===&lt;big&gt;&lt;u&gt;Work Area&lt;/u&gt;&lt;/big&gt;===<br /> *Keep work area clean and well lit. Cluttered work areas and poor lighting can lead to accidents.<br /> *Clean up/contain any fluid spills immediately to prevent slips or falls.<br /> *Be aware of potential hazards when performing any service or maintenance to the unit.<br /> ===&lt;big&gt;&lt;u&gt;Service &amp; Maintenance&lt;/u&gt;&lt;/big&gt;===<br /> Service personnel shall wear Personal Protective Equipment (PPE) appropriate for the task being performed.<br /> {|<br /> |[[File:Electrical Hazard Warning.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Electrical_Hazard_Warning.png]]<br /> [[File:Danger Warning.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Danger_Warning.png|alt=DANGER]]<br /> |<br /> ===&lt;big&gt;&lt;u&gt;Lockout/Tagout&lt;/u&gt;&lt;/big&gt;===<br /> '''Lockout/tagout the BE per your corporate policy, if damaged or not functioning properly. Lockout/tagout and de-energize all systems prior to performing any maintenance or service to unit.'''<br /> |}<br /> {|<br /> |[[File:Warning-Battery-Explosion.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Warning-Battery-Explosion.png]]<br /> [[File:Danger Warning.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Danger_Warning.png|alt=DANGER]]<br /> |<br /> ===&lt;big&gt;&lt;u&gt;Lead-Acid Battery Explosion Hazard&lt;/u&gt;&lt;/big&gt;===<br /> '''DO NOT allow open flames or sparks of any kind near a battery. Highly explosive gas is generated when charging a battery that can remain in battery cells for extended periods of time after charging is complete.'''<br /> *Always wear appropriate PPE including rubber apron, gloves, boots and full face shield when performing service or maintenance to any lead-acid batteries.<br /> *DO NOT place metal or other conductive objects on top of battery. Arcing may occur causing damage to the battery and/or serious personal injury or death.<br /> *Use only chargers matching the voltage and amperage of the battery being charged. Overcharging a battery can cause damage to the battery, charger and/or serious personal injury or death.<br /> *Turn off charger before disconnecting battery from charger. Arcing between battery and charger connectors can cause damage to the connectors and/or serious personal injury or death.<br /> |}<br /> {|<br /> |[[File:Warning-Hydrualic-Hazard.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Warning-Hydrualic-Hazard.png]]<br /> [[File:Warning.png|alt=WARNING|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Warning.png]]<br /> |<br /> ===&lt;big&gt;&lt;u&gt;Hydraulic Hazards&lt;/u&gt;&lt;/big&gt;===<br /> '''AVOID HIGH PRESSURE FLUIDS-Escaping fluid under pressure can penetrate the skin causing serious injury. Relieve pressure before disconnecting hydraulic lines. Tighten all connections before applying pressure. Keep hands and body away from pin holes which eject fluids under high pressure. Use a piece of cardboard or paper to search for leaks. DO NOT use your hand.'''<br /> <br /> '''Any fluid injected into the skin under high pressure should be considered a serious medical emergency despite an initial normal appearance of the skin. There will be a delayed onset of pain, and serious tissue damage may occur. Medical attention should be sought immediately.'''<br /> |}<br /> {|<br /> ![[File:No Pacemakers Notice.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:No_Pacemakers_Notice.png]][[File:Strong Magnet Field Hazard Warning.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Strong_Magnet_Field_Hazard_Warning.png]]<br /> [[File:Warning.png|alt=WARNING|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Warning.png]]<br /> |<br /> ===&lt;big&gt;&lt;u&gt;Electromagnet Hazard&lt;/u&gt;&lt;/big&gt;===<br /> '''Units equipped with magnetic extraction generate strong magnetic fields. Persons with pacemakers &lt;u&gt;SHOULD&lt;/u&gt;''' &lt;u&gt;'''NOT'''&lt;/u&gt; '''operate or be in close proximity to equipment during operation.'''<br /> <br /> '''Failure to comply with this direction''' '''could result in serious personal injury or death.'''<br /> |}<br /> ===&lt;big&gt;&lt;u&gt;Operational Safety&lt;/u&gt;&lt;/big&gt;===<br /> *Only personnel trained in the proper and safe operation of BE units may operate or service the BE.<br /> *Operators shall wear appropriate PPE suitable for working with industrial lead-acid batteries while operating the BE ''(See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Lead-Acid_Battery_Explosion_Hazard Lead-Acid Battery Explosion Hazard] section).''<br /> *All data plates, warning labels, placards, etc. shall be in place and legible at all times. Contact BHS for re-placement data plates, warning labels, placards or instructions.<br /> *All users and service personnel shall be familiar with the meaning and risks associated with all data plates, warning labels, etc.<br /> *All operators and service personnel shall be aware of potential crush and shear points while operating or servicing the BE.<br /> *Keep hands and arms inside the operator compartment while operating the BE.<br /> *Remove BE from service if damaged, defective, or operating improperly (or becomes such while operating) until repairs can be made to correct any problem(s).<br /> *All operators shall be aware of the location of the end stops in the travel path to prevent driving the BE into the end stops.<br /> ===&lt;u&gt;&lt;big&gt;Do's and Don'ts&lt;/big&gt;&lt;/u&gt;===<br /> *'''DO NOT''' exceed the maximum capacity of the BE.<br /> *'''DO NOT''' modify or fit the BE with attachments without prior, written approval from BHS.<br /> *'''DO NOT''' perform any maintenance or service to the BE with a battery loaded on the BE.<br /> *'''DO NOT''' allow anyone to ride in or on the BE.<br /> *'''DO NOT''' operate the BE with any guard or cover removed unless required for maintenance or repair.<br /> *Disconnect the BE from all power sources before attempting to perform service or maintenance to the unit.<br /> *'''DO NOT''' drive the BE into the end stops.<br /> *'''DO NOT''' operate the BE if disengaged from the guidance track.<br /> *'''DO NOT''' allow a battery to exit the BE when a lift truck or battery stand is not present to accept the battery.<br /> *'''DO NOT''' rotate the arm onto a battery such that any part of the extractor arm, vacuum cup or magnet contacts the top of the battery.<br /> *'''DO NOT''' allow anyone to enter the area under the carriage without the service stands properly installed.<br /> *'''DO NOT''' use the BE in a manner for which it is not intended. Some examples of prohibited use are but not limited to:<br /> **To transport people<br /> **As a vehicle jack<br /> **To lift loads greater than its rated load capacity<br /> **Where unintentional movement may exist<br /> **Having direct contact with foodstuffs<br /> **In a potentially explosive atmosphere<br /> ==&lt;big&gt;De-Energization&lt;/big&gt;==<br /> 1. Fully lower the BE roller bed or position the roller bed on service stands if service requires the bed be raised. See Figures 1 &amp; 2.<br /> {|<br /> |[[File:WARNING-warn.png|alt=WARNING|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:WARNING-warn.png]]<br /> !Failure to properly support the roller bed when performing service under the BE could result in injury from the roller bed lowering unexpectedly.<br /> |}[[File:IOP-400 BE-SL&amp;DS (10-23) Fully Lower BE Roller Bed.png|alt=Fully lowered BE roller bed|none|thumb|FIGURE 1|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Fully_Lower_BE_Roller_Bed.png]][[File:IOP-400 BE-SL&amp;DS (10-23) BE Roller Bed on Service Stands .png|alt=Raised BE roller bed positioned on service stands|none|thumb|FIGURE 2|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_BE_Roller_Bed_on_Service_Stands_.png]]2. Turn key on dashboard to the “OFF” position. See Figure 3.[[File:IOP-400 BE-SL&amp;DS (10-23) De-Energization Figure 3.png|alt=Key on BE dashboard turned to the “OFF” position.|none|thumb|FIGURE 3|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_De-Energization_Figure_3.png]]3. Disconnect power to the extractor or shut off the electrical branch circuit breaker.<br /> {|<br /> |[[File:Danger Warning.png|alt=DANGER|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Danger_Warning.png]]<br /> |'''Failure to disconnect electrical power to the BE could result in electrical shock. Serious personal injury or death will occur.'''<br /> |}4. Actuate all hydraulic levers in both directions to re-lease any stored hydraulic pressure. See Figure 4.<br /> {|<br /> |[[File:WARNING-warn.png|alt=WARNING|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:WARNING-warn.png]]<br /> |'''Failure to release any stored hydraulic pres-sure could result in injury from:'''<br /> *'''Escaping hydraulic fluid under high pressure (see ''[https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Hydraulic_Hazards HYDRAULIC HAZARDS]'' in the ''[https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#General_Safety GENERAL SAFETY]'' section).'''<br /> *'''Unexpected movement of hydraulic components.'''<br /> |}[[File:IOP-400 BE-SL&amp;DS (10-23) Actuate all Hydraulic Levers in Both Directions.png|alt=Actuate all hydraulic levers in both directions to release any stored hydraulic pressure.|none|thumb|FIGURE 4|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Actuate_all_Hydraulic_Levers_in_Both_Directions.png]]<br /> ==&lt;big&gt;Labels &amp; Placards&lt;/big&gt;==<br /> '''Operators should be familiar with the meaning of the following labels and placards found on the BE to ensure proper and safe operation.'''<br /> {| class=&quot;wikitable&quot;<br /> |-<br /> ![[File:Read Before Operating Notice.png|alt=Read Before Operating|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Read_Before_Operating_Notice.png]]<br /> |'''Read and understand instruction manual prior to use.'''<br /> |-<br /> ![[File:Lockout-Before-Servicing-Notice.png|alt=Lockout Before Servicing Unit|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Lockout-Before-Servicing-Notice.png]]<br /> |'''Lockout before servicing.'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Extractor Arm Positioning Arrows.png|alt=BE-SL &amp; BE-DS Extractor Arm Positioning Arrows|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Extractor_Arm_Positioning_Arrows.png]]<br /> |'''Extractor arm positioning arrows'''<br /> |-<br /> ![[File:Do Not Operate Without Guards or Covers Notice.png|alt=DO NOT Operate Without Guards or Covers Notice|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Do_Not_Operate_Without_Guards_or_Covers_Notice.png]]<br /> |'''DO NOT operate with guards or covers removed'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) No Riders Allowed.png|alt=No riders allowed|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_No_Riders_Allowed.png]]<br /> |'''NO riders allowed.'''<br /> |-<br /> ![[File:No Pacemakers Notice.png|alt=DO NOT operate by or in close proximity to people with pacemakers.|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:No_Pacemakers_Notice.png]]<br /> |'''DO NOT operate by or in close proximity to people with pacemakers.'''<br /> |-<br /> ![[File:Strong Magnet Field Hazard Warning.png|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Strong_Magnet_Field_Hazard_Warning.png]]<br /> [[File:Warning.png|alt=WARNING|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Warning.png]]<br /> |'''Strong Magnet Field Hazard'''<br /> *Attraction between magnet and metallic objects can crush.<br /> *Keep unsecured metallic objects away from magnet.<br /> *De-energize and lockout/tagout before servicing.<br /> |-<br /> ![[File:Chain Entanglement Hazard Warning.png|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Chain_Entanglement_Hazard_Warning.png]]<br /> [[File:Warning.png|alt=WARNING|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Warning.png]]<br /> |'''Chain Entanglement Hazard'''<br /> *Moving chains and sprockets can crush and cut.<br /> *Keep hands and fingers clear. Do not operate with guards removed.<br /> *De-energize and lockout/tagout before servicing.<br /> |-<br /> ![[File:Electrical Hazard Warning.png|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Electrical_Hazard_Warning.png]]<br /> [[File:Danger Warning.png|alt=DANGER|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Danger_Warning.png]]<br /> |'''Electrical Hazard'''<br /> *Energized components can cause electrical shock.<br /> *De-energize and lockout/tagout before servicing.<br /> |-<br /> ![[File:BE-SL and BE-DS Power Off-On.png|alt=BE-SL and BE-DS Power Off-On|frameless|180x180px|link=https://tech.bhs1.com/index.php/File:BE-SL_and_BE-DS_Power_Off-On.png]]<br /> |'''Power Off/On'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Horn Control.png|alt=BE-SL and BE-DS Horn Control |frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Horn_Control.png]]<br /> |'''Horn (If equipped)'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Vacuum Control.png|alt=BE-SL and BE-DS Vacuum Control |frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Vacuum_Control.png]]<br /> |'''Vacuum Off/On (If equipped)'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Magnet Extraction.png|alt=BE-SL and BE-DS Magnet Off/On|frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Magnet_Extraction.png]]<br /> |'''Magnet Off/On (If equipped)'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Powered Roller Cut Off Override.png|alt=BE-SL and BE-DS Powered Roller Cut Off Override|frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Powered_Roller_Cut_Off_Override.png]]<br /> |'''Powered Roller Cutout Override (If equipped)'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Rack-Level-Assist.png|alt=BE-SL and BE-DS Rack Level Assist |frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Rack-Level-Assist.png]]<br /> |'''Rack Level Assist Indicator (If equipped)'''<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> ! rowspan=&quot;3&quot; |[[File:IOP-400_BE-SL&amp;DS_(10-23)_Power_Rollers_and_Arm_Travel.png.png|alt=BE-SL &amp; DS Powered Roller and Arm Travel Controls|frameless|504x504px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Power_Rollers_and_Arm_Travel.png.png]]<br /> |'''Far Power Rollers'''<br /> |-<br /> |'''Arm Travel'''<br /> |-<br /> |'''Near Power Rollers'''<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> |+''BE-SL &amp; DS UNITS ONLY''<br /> ! colspan=&quot;3&quot; |[[File:IOP-400 BE-SL&amp;DS (10-23) BE-SL&amp;DS Units Platform Controls.png|alt=BE-SL &amp; DS Specific Controls|frameless|460x460px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_BE-SL&amp;DS_Units_Platform_Controls.png]]<br /> |-<br /> |Drive Forward/Reverse<br /> |Platform Raise/Lower<br /> |Arm Rotation Near/Far<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> |+''BE-TS &amp; QS UNITS ONLY''<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) BE-TS &amp; BE-QS Platform Raise and Lower Controls.png|alt=BE-TS &amp; BE-QS Platform Raise and Lower Controls|frameless|240x240px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_BE-TS_&amp;_BE-QS_Platform_Raise_and_Lower_Controls.png]]<br /> ! colspan=&quot;2&quot; |[[File:IOP-400 BE-SL&amp;DS (10-23)BE-TS &amp; BE-QS Specific Controls.png|alt=BE-TS &amp; BE-QS Specific-Controls|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)BE-TS_&amp;_BE-QS_Specific_Controls.png]]<br /> |-<br /> |Platform Raise/Lower<br /> |Drive Foward/Reverse<br /> |Arm Rotation Near/Far<br /> |}<br /> =&lt;big&gt;General Information&lt;/big&gt;=<br /> ==&lt;big&gt;Specification Data&lt;/big&gt;==<br /> [[File:BE-TS Specification Data.png|alt=IOP-401 BE-TS (10-23) Specification Data|frameless|600x600px]]<br /> {| class=&quot;wikitable&quot;<br /> | colspan=&quot;2&quot; |<br /> !BE-24-2-TS<br /> !BE-36-2-TS<br /> !BE-42-2-TS<br /> |-<br /> !A<br /> |Overall Length<br /> |156.5&quot;<br /> |180.5&quot;<br /> |192.5&quot;<br /> |-<br /> !B<br /> |Overall Width<br /> |72&quot;<br /> |72&quot;<br /> |72&quot;<br /> |-<br /> !C<br /> |Overall Height (Lowered)<br /> |158.188&quot;<br /> |158.188&quot;<br /> |160.688&quot;<br /> |-<br /> !<br /> |Overall Height (Raised w/ Overhead Guard)<br /> |182.375&quot;<br /> |182.375&quot;<br /> |182.375&quot;<br /> |-<br /> !<br /> |Overall Height (Raised w/ Strobe &amp; Alarm)<br /> |191.75&quot;<br /> |191.75&quot;<br /> |191.75&quot;<br /> |-<br /> !D<br /> |Wheel Base<br /> |98&quot;<br /> |122&quot;<br /> |134&quot;<br /> |-<br /> !E<br /> |Drive Wheel Center line<br /> |51&quot;<br /> |51&quot;<br /> |51&quot;<br /> |-<br /> !F<br /> |Battery Compartment Width<br /> |24&quot;<br /> |36&quot;<br /> |42&quot;<br /> |-<br /> !G<br /> |Ground Clearance<br /> |.625&quot;<br /> |.625&quot;<br /> |.625&quot;<br /> |-<br /> !H<br /> |Minimum Roller Height<br /> |6.5&quot;<br /> |6.5&quot;<br /> |6.5&quot;<br /> |-<br /> !I<br /> |Maximum Roller Height<br /> |96&quot;<br /> |96&quot;<br /> |96&quot;<br /> |-<br /> !J<br /> |Operator Platform Height (Lowered/Raised)<br /> |11&quot; / 103&quot;<br /> |11&quot; / 103&quot;<br /> |11&quot; / 103&quot;<br /> |}<br /> <br /> === UNITS WITH 10 HP POWER UNIT USED PRIOR TO DECEMBER, 2014 ===<br /> {| class=&quot;wikitable&quot;<br /> !<br /> !BE-24-2-TS<br /> !BE-36-2-TS<br /> !BE-42-2-TS<br /> |-<br /> |Travel Speed<br /> |0 to 190 ft/min / 0 to 0.97 m/s<br /> |0 to 190 ft/min / 0 to 0.97 m/s<br /> |0 to 190 ft/min / 0 to 0.97 m/s<br /> |-<br /> |Raise - Lower Speed<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |-<br /> |Powered Roller Speed<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |-<br /> |Arm Traverse Speed<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |-<br /> |Arm Rotation Time<br /> |6 s to 8 s<br /> |6 s to 8 s<br /> |6 s to 8 s<br /> |-<br /> |Draw Bar Pull / Vacuum<br /> <br /> (12&quot; / 305 mm Round Cup)<br /> |1,000 lb / 454 kg<br /> |1,000 lb / 454 kg<br /> |1,000 lb / 454 kg<br /> |-<br /> |Draw Bar Pull Magnet*<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |-<br /> |Vacuum Attach Time<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |-<br /> |Vacuum Release Time<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |-<br /> |Input Voltage<br /> |480 V / 3 ph / 60Hz<br /> |480 V / 3 ph / 60Hz<br /> |480 V / 3 ph / 60Hz<br /> |-<br /> |AC Current Draw<br /> |16.5 A<br /> |16.5 A<br /> |16.5 A<br /> |-<br /> |Control Circuit Voltage<br /> |120 V ac<br /> |120 V ac<br /> |120 V ac<br /> |-<br /> |Hydraulic Power Unit<br /> |10 hp / 7.46 kW<br /> |10 hp / 7.46 kW<br /> |10 hp / 7.46 kW<br /> |-<br /> |Hydraulic Pump<br /> |16 gal/min / 61 L/min<br /> |16 gal/min / 61 L/min<br /> |16 gal/min / 61 L/min<br /> |-<br /> |Power Unit<br /> |Hydraulic, Variable Displacement<br /> |Hydraulic, Variable Displacement<br /> |Hydraulic, Variable Displacement<br /> |-<br /> |Operating Pressure<br /> |1,500 psi / 103 bar<br /> |1,500 psi / 103 bar<br /> |1,500 psi / 103 bar<br /> |-<br /> |Vacuum Pump<br /> |1/3 hp / 0.25 kW<br /> |1/3 hp / 0.25 kW<br /> |1/3 hp / 0.25 kW<br /> |-<br /> |Vacuum<br /> |21&quot; Hg / 711 mbar<br /> |21&quot; Hg / 711 mbar<br /> |21&quot; Hg / 711 mbar<br /> |-<br /> |Full Load Capacity<br /> |10,000 lb / 4535 kg<br /> |10,000 lb / 4535 kg<br /> |10,000 lb / 4535 kg<br /> |-<br /> |Weight (Empty)<br /> |8,000 lb / 3629 kg<br /> |8,300 lb / 3765 kg<br /> |8,600 lb / 3901 kg<br /> |-<br /> |Total Compartment Rollers / Powered<br /> |11/5<br /> |11/5<br /> |11/5<br /> |-<br /> |Guide Track<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |-<br /> |Overall Dimensions (L x W x H)<br /> |156.5&quot; x 72&quot; x 158.188&quot;<br /> <br /> 3975 mm x 1829 mm x 4018 mm<br /> |180.5&quot; x 72&quot; x 158.188&quot;<br /> <br /> 4585 mm x 1829 mm x 4018 mm<br /> |192.5&quot; x 72&quot; x 160.688&quot;<br /> <br /> 4890 mm x 1829 mm x 4081 mm<br /> |-<br /> |Vacuum Arm Reach<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |-<br /> |Vacuum Arm Reach (Hydraulic Extension)<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |-<br /> |Magnet Arm Reach (Hydraulic Extension) Truck Side<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |-<br /> |Wheel Base<br /> |98&quot; / 2489 mm<br /> |122&quot; / 3099 mm<br /> |134&quot; / 3404 mm<br /> |-<br /> |Drive Wheel Center Line<br /> |51&quot; / 1295 mm<br /> |51&quot; / 1295 mm<br /> |51&quot; / 1295 mm<br /> |-<br /> |Battery Compartment Width<br /> |24&quot; / 610 mm<br /> |36&quot; / 915 mm<br /> |42&quot; / 1067 mm<br /> |-<br /> |Maximum Battery Dimensions<br /> <br /> (L x W x H)<br /> |48&quot; x 23&quot; x 34&quot;<br /> <br /> 1219 mm x 584 mm x 864 mm<br /> |48&quot; x 35&quot; x 34&quot;<br /> <br /> 1219 mm x 889 mm x 864 mm<br /> |48&quot; x 41&quot; x 34&quot;<br /> <br /> 1219 mm x 1041 mm x 864 mm<br /> |-<br /> |Minimum Battery Width<br /> <br /> (with vacuum / magnet)<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |-<br /> |Minimum Battery Height<br /> |17.75&quot; / 451 mm<br /> |17.75&quot; / 451 mm<br /> |17.75&quot; / 451 mm<br /> |-<br /> |Ground Clearance<br /> |0.63&quot; / 16 mm<br /> |0.63&quot; / 16 mm<br /> |0.63&quot; / 16 mm<br /> |-<br /> |Roller Height<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |-<br /> ! colspan=&quot;4&quot; |NOTES<br /> |-<br /> | colspan=&quot;4&quot; |''Specifications may vary ± 5% because of temperature, floor considerations, and operator efficiency. Values represented under normal operating conditions.''<br /> |-<br /> | colspan=&quot;4&quot; |''* Varies with battery case thickness and condition.''<br /> |}<br /> <br /> === UNITS WITH 20 HP POWER UNIT USED DECEMBER, 2014 TO PRESENT ===<br /> {| class=&quot;wikitable&quot;<br /> !<br /> !BE-24-2-TS<br /> !BE-36-2-TS<br /> !BE-42-2-TS<br /> |-<br /> |Travel Speed<br /> |0 to 240 ft/min / 0 to 1.22 m/s<br /> |0 to 240 ft/min / 0 to 1.22 m/s<br /> |0 to 240 ft/min / 0 to 1.22 m/s<br /> |-<br /> |Raise - Lower Speed<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |-<br /> |Powered Roller Speed<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |-<br /> |Arm Traverse Speed<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |-<br /> |Arm Rotation Time<br /> |6 s to 8 s<br /> |6 s to 8 s<br /> |6 s to 8 s<br /> |-<br /> |Draw Bar Pull / Vacuum<br /> <br /> (12&quot; / 305 mm Round Cup)<br /> |1,000 lb / 454 kg<br /> |1,000 lb / 454 kg<br /> |1,000 lb / 454 kg<br /> |-<br /> |Draw Bar Pull Magnet*<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |-<br /> |Vacuum Attach Time<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |-<br /> |Vacuum Release Time<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |-<br /> |Input Voltage<br /> |480 V / 3 ph / 60Hz<br /> |480 V / 3 ph / 60Hz<br /> |480 V / 3 ph / 60Hz<br /> |-<br /> |AC Current Draw<br /> |35 A<br /> |35 A<br /> |35 A<br /> |-<br /> |AC Current Draw w/ Electric Drive Option<br /> |42 A<br /> |42 A<br /> |42 A<br /> |-<br /> |Control Circuit Voltage<br /> |120 V ac<br /> |120 V ac<br /> |120 V ac<br /> |-<br /> |Hydraulic Power Unit<br /> |20 hp / 14.9 kW<br /> |20 hp / 14.9 kW<br /> |20 hp / 14.9 kW<br /> |-<br /> |Hydraulic Power Unit w/ Electric Drive Option<br /> |25 hp / 18.7 kW<br /> |25 hp / 18.7 kW<br /> |25 hp / 18.7 kW<br /> |-<br /> |Hydraulic Pump<br /> |22 gal/min / 83 L/min<br /> |22 gal/min / 83 L/min<br /> |22 gal/min / 83 L/min<br /> |-<br /> |Power Unit<br /> |Hydraulic, Variable Displacement<br /> |Hydraulic, Variable Displacement<br /> |Hydraulic, Variable Displacement<br /> |-<br /> |Operating Pressure<br /> |1,500 psi / 103 bar<br /> |1,500 psi / 103 bar<br /> |1,500 psi / 103 bar<br /> |-<br /> |Vacuum Pump<br /> |1/3 hp / 0.25 kW<br /> |1/3 hp / 0.25 kW<br /> |1/3 hp / 0.25 kW<br /> |-<br /> |Vacuum<br /> |21&quot; Hg / 711 mbar<br /> |21&quot; Hg / 711 mbar<br /> |21&quot; Hg / 711 mbar<br /> |-<br /> |Full Load Capacity<br /> |10,000 lb / 4535 kg<br /> |10,000 lb / 4535 kg<br /> |10,000 lb / 4535 kg<br /> |-<br /> |Weight (Empty)<br /> |8,000 lb / 3629 kg<br /> |8,300 lb / 3765 kg<br /> |8,600 lb / 3901 kg<br /> |-<br /> |Total Compartment Rollers / Powered<br /> |11/5<br /> |11/5<br /> |11/5<br /> |-<br /> |Guide Track<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |-<br /> |Overall Dimensions (L x W x H)<br /> |156.5&quot; x 72&quot; x 158.188&quot;<br /> <br /> 3975 mm x 1829 mm x 4018 mm<br /> |180.5&quot; x 72&quot; x 158.188&quot;<br /> <br /> 4585 mm x 1829 mm x 4018 mm<br /> |192.5&quot; x 72&quot; x 160.688&quot;<br /> <br /> 4890 mm x 1829 mm x 4081 mm<br /> |-<br /> |Vacuum Arm Reach<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |-<br /> |Vacuum Arm Reach (Hydraulic Extension)<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |-<br /> |Magnet Arm Reach (Hydraulic Extension) Truck Side<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |-<br /> |Wheel Base<br /> |98&quot; / 2489 mm<br /> |122&quot; / 3099 mm<br /> |134&quot; / 3404 mm<br /> |-<br /> |Drive Wheel Center Line<br /> |51&quot; / 1295 mm<br /> |51&quot; / 1295 mm<br /> |51&quot; / 1295 mm<br /> |-<br /> |Battery Compartment Width<br /> |24&quot; / 610 mm<br /> |36&quot; / 915 mm<br /> |42&quot; / 1067 mm<br /> |-<br /> |Maximum Battery Dimensions<br /> <br /> (L x W x H)<br /> |48&quot; x 23&quot; x 34&quot;<br /> <br /> 1219 mm x 584 mm x 864 mm<br /> |48&quot; x 35&quot; x 34&quot;<br /> <br /> 1219 mm x 889 mm x 864 mm<br /> |48&quot; x 41&quot; x 34&quot;<br /> <br /> 1219 mm x 1041 mm x 864 mm<br /> |-<br /> |Minimum Battery Width<br /> <br /> (with vacuum / magnet)<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |-<br /> |Minimum Battery Height<br /> |17.75&quot; / 451 mm<br /> |17.75&quot; / 451 mm<br /> |17.75&quot; / 451 mm<br /> |-<br /> |Ground Clearance<br /> |0.63&quot; / 16 mm<br /> |0.63&quot; / 16 mm<br /> |0.63&quot; / 16 mm<br /> |-<br /> |Roller Height<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |-<br /> ! colspan=&quot;4&quot; |NOTES<br /> |-<br /> | colspan=&quot;4&quot; |''Specifications may vary ± 5% because of temperature, floor considerations, and operator efficiency. Values represented under normal operating conditions.''<br /> |-<br /> | colspan=&quot;4&quot; |''* Varies with battery case thickness and condition.''<br /> |}<br /> ==&lt;big&gt;Pre-Installation Check&lt;/big&gt;==<br /> ===&lt;big&gt;&lt;u&gt;Floor Conditions&lt;/u&gt;&lt;/big&gt;===<br /> The floor is the single most critical area of the battery room.  A bad floor can cause significant issues with the installation as well as downtime and maintenance problems with the extractor.  The floor should be verified as to its minimum thickness and strength with user.  As noted on the drawing, the specific requirement of flatness for your particular type of system is listed. Below is a chart stating floor requirements.  If possible, especially on double stack and higher systems, a digital level should be used to shoot the grade for compliance with the specification.  The floor should also be inspected for severe cracks or excessively wide expansion joints in the travel path of the machine.  If floor drains are present, they must not have a grade to the opening that encroaches into the travel path. <br /> <br /> F-min is a rating method used to evaluate the flatness and levelness of a floor designated as &quot;defined travel path&quot;.  For example, an F-min rating of 60 means that there is no more than .129&quot; of variation in the transverse axis (wheels left to right) and .287&quot; variation in the longitudinal axis (front to back) on the equipment.<br /> <br /> To avoid potential damage to drive wheel assemblies, guide track, structural components, guide rollers  and issues with the inner frame equalization the &quot;defined travel path&quot; of the Battery Extractor should meet or exceed the recommended F-min specification. See chart below for the model specifications.<br /> {| class=&quot;wikitable&quot;<br /> !Model<br /> !F-Min<br /> !+/- Longitudinal<br /> !+/- Transverse<br /> !Slope Defect<br /> |-<br /> |SL, DS<br /> |40<br /> |.287&quot;<br /> |.192&quot;<br /> |.096&quot;<br /> |-<br /> |TS<br /> |60<br /> |.186&quot;<br /> |.129&quot;<br /> |.066&quot;<br /> |-<br /> |QS<br /> |85<br /> |.131&quot;<br /> |.091&quot;<br /> |.047&quot;<br /> |}[[File:IOP-400 BE-SL&amp;DS (10-23) Floor Conditions Pre-Installation Check.png|alt=BE-TS Floor Conditions Pre-Installation Check|frameless|500x500px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Floor_Conditions_Pre-Installation_Check.png]]<br /> ==&lt;big&gt;Operating Controls &amp; Instructions&lt;/big&gt;==<br /> <br /> === &lt;big&gt;&lt;u&gt;Operator Console&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Operator Console.png|alt=BE-TS Operator Console|frameless|1080x1080px]]<br /> <br /> '''''NOTE:''' Safety devices for the machine and the machine operating area SHALL NOT be rendered inoperable or misused.'' <br /> <br /> ''Typical BE-TS operator console shown above. Position of optional controls may vary from that shown depending on age of unit and/or combination of optional controls present.''<br /> <br /> ''HMI display standard on units shipped after February, 2020 for Industrial Internet of Things (IIoT) package.''<br /> <br /> ==== &lt;u&gt;&lt;big&gt;Safety Features&lt;/big&gt;&lt;/u&gt; ====<br /> &lt;u&gt;Key Switch&lt;/u&gt; – Located on the dash (see above).  Primary on/off switch to prevent unauthorized personnel from operating the BE.<br /> <br /> &lt;u&gt;Emergency Stop&lt;/u&gt; – Located on the dash (see above). Will stop all functions immediately, locking all hydraulics in place. To use, press down on the red button. The machine key must be used to reset the emergency stop.<br /> <br /> &lt;u&gt;Foot Switch&lt;/u&gt; – Must be depressed to operate the BE.  Stepping off the foot switch will stop all functions immediately, locking all hydraulics in place.  To resume use, depress the foot switch.<br /> <br /> &lt;u&gt;Gate Switch&lt;/u&gt; – The gate must be fully closed for the BE to operate.<br /> <br /> &lt;u&gt;Extractor Arm Switch&lt;/u&gt; – Does not permit the machine to move forward or backward unless the extractor arm is located in the center of the carriage between the indicating arrows located on the arm guard.<br /> <br /> &lt;u&gt;Powered Roller Cutout (PRC-1 or PRC-2) ''(if equipped)''&lt;/u&gt; – Disengages the powered roller function when the photo eye positioned on the edge of the BE battery compartment is disrupted by a battery, requiring additional input from the operator. Pressing the &quot;Power Roller Cutout&quot; override button (see above) on the dash will resume  powered roller operation when loading or unloading batteries from the BE carriage.<br /> <br /> &lt;u&gt;Horn ''(If equipped)''&lt;/u&gt; – Button located on the dash (see above).  Used to alert personnel before moving the BE.<br /> <br /> &lt;u&gt;Strobe Light ''(If equipped)''&lt;/u&gt; – Located on a vertical stanchion mounted to the right rear of the operator compartment. For units equipped with optional overhead guard (OHG), the beacon is located above of the operator compartment.  Beacon automatically flashes when the BE is switched on to visually notify the BE is in use.<br /> <br /> &lt;u&gt;Audible Alarm ''(if equipped)''&lt;/u&gt; – Mounted in the same location as the Strobe Light.  Automatically sounds when the BE is switched on to notify personnel that the BE is in use.<br /> <br /> &lt;u&gt;Blue Light ''(if equipped)''&lt;/u&gt; - Mounted at an elevated position on either end of the extractor which project a bright, highly concentrated blue beam pattern on the ground visually alerting personnel to the direction the extractor is moving.<br /> <br /> === &lt;big&gt;&lt;u&gt;Operation Overview&lt;/u&gt;&lt;/big&gt; ===<br /> <br /> * All operators should be familiar with the operator console of the extractor before performing any battery changes.  The controls of the console are simple and well marked.  It consists of six, manually operated, hydraulic control valves and a three position selector switch which controls the left and right vacuum cups (or optional magnets).<br /> * The operator shall make certain there are no persons or obstacles in the extractor path prior to traveling forward or reverse.<br /> * All manual valves are moved in the direction of the function travel which it controls with exception of the lift/lower valve, which is pulled toward the operator for &quot;up&quot; and pushed away for &quot;down.&quot;<br /> * In the event of any failure or malfunction, step off the dead-man switch or press the E-stop button and all functions will stop immediately, locking all hydraulics in place.<br /> * The extractor arm must be in the center of the carriage or the unit will not travel forward or reverse.<br /> * To ensure smooth operation, all valve movements should be made in a slow, deliberate motion.<br /> * Only one key should be provided to operate the extractor.<br /> * When leaving the machine, the operator shall turn off the key switch, remove the key and logout out of the IIoT (if equipped) to prevent unauthorized use<br /> * Ensure all the batteries and cables are properly stored in the battery stands prior to moving the BE.<br /> * The BE is designed to carry only one battery in each compartment on the carriage.<br /> * When loading the BE, position the batteries in the center of the compartments on the powered rollers to prevent any battery movement when transporting.<br /> * Ensure there are no projections outside of the carriage before moving the BE.<br /> <br /> === &lt;u&gt;&lt;big&gt;Operating Instructions&lt;/big&gt;&lt;/u&gt; ===<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Pre-Change Out Preparation&lt;/u&gt;&lt;/big&gt; ====<br /> 1. Position lift truck for change out in designated area.<br /> <br /> 2. Remove all battery restraints and disconnect battery cables following manufacturers guidelines.  (Be sure to position battery cables so as not to be damaged by the battery during change out.)<br /> <br /> 3. Board battery extractor and close safety gate.  (Gate must be fully closed or unit will not operate.)<br /> <br /> 4. Turn key switch to &quot;ON&quot; position. <br /> <br /> 5. Log in on the HMI display (if equipped with BE-IIoT package).<br /> <br /> 6. Depress foot pedal.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Discharged Battery Removal&lt;/u&gt;&lt;/big&gt; ====<br /> 1. Move extractor forward or reverse to position center of empty compartment with center of lift truck battery compartment. (Lead roller of extractor is equipped with a centering groove.  Users may find it beneficial to mark center of lift truck compartment to aid in alignment.)<br /> <br /> 2. Align extractor's roller compartment height with lift truck's battery compartment.<br /> <br /> 3. Rotate extractor arm into battery compartment aligned in Step 2.<br /> <br /> 4. Move extractor arm toward battery until vacuum cup/magnet contacts battery.<br /> <br /> [[File:NOTICE-warn.png|alt=NOTICE|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:NOTICE-warn.png]] '''DO NOT force cup/magnet into battery after initial contact with battery is made.'''<br /> <br /> 5. Energize vacuum/magnet by turning selector switch to proper direction, left or right.<br /> <br /> 6. Move extractor arm away from lift truck toward center of extractor roller bed, removing discharged battery.  (Battery should be pulled past first three idler rollers onto first or second powered roller.)<br /> <br /> 7. Turn off vacuum/magnet and move extractor arm away from battery 1&quot; to 2&quot;.<br /> <br /> 8. Rotate extractor arm out of battery compartment into opposite compartment (if empty) and center arm in carriage.<br /> <br /> 9. Move battery into center of compartment using powered rollers.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Charged Battery Retrieval&lt;/u&gt;&lt;/big&gt; ====<br /> 1. Locate charged battery for appropriate type of lift truck being changed.<br /> <br /> 2. Raise battery extractor roller compartment to proper level to gain access as needed to disconnect desired battery from its charger and disengage battery safety stop.<br /> <br /> [[File:WARNING-warn.png|alt=WARNING|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:WARNING-warn.png]] '''ALWAYS be sure charging has been completed and charger is not still charging battery. Dangerous sparking/arcing can occur if battery is unplugged from charger while charging.'''<br /> <br /> 3. Move extractor to appropriate rack position and align empty roller compartment with the center of the battery storage rack compartment.  ''(The battery safety stop of each compartment is the center of that compartment and should be used for alignment with the groove in the lead roller of the battery extractor compartment.'') <br /> <br /> 4. Rotate arm into empty compartment (if not already positioned there.)<br /> <br /> 5. Move extractor arm toward battery until vacuum cup/magnet contacts battery.<br /> <br /> 6. Energize vacuum cup/magnet by turning selector switch to proper direction, left or right.<br /> <br /> [[File:NOTICE-warn.png|alt=NOTICE|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:NOTICE-warn.png]] '''DO NOT force cup/magnet into battery after initial contact with battery is made.'''<br /> <br /> 7. Move extractor arm away from battery rack toward center of extractor roller bed, removing charged battery.  (Battery should be pulled past first three idler rollers onto first or second powered roller.)<br /> <br /> 8. Turn off vacuum/magnet and move extractor arm away from battery 1&quot; to 2&quot;.<br /> <br /> 9. Rotate extractor arm out of battery compartment into fully vertical position.<br /> <br /> 10. Move battery into center of compartment using powered rollers.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Discharged Battery Return&lt;/u&gt;&lt;/big&gt; ====<br /> 1. If required, adjust extractor compartment height to battery rack level with open battery compartment.  Drive extractor to align roller compartment containing discharged battery with open battery compartment.<br /> <br /> 2. Return discharged battery to battery rack using powered rollers.<br /> <br /> '''''NOTE:''''' ''In most instances, batteries can be deposited into battery racks in one motion using only powered rollers.  When this does not work, the battery may need slight assistance from extractor arm.  To do this, rotate arm into compartment such as one would if removing battery from rack.  If extractor is vacuum equipped, position top edge of cup slightly higher than edge of battery (or over lifting eye if so equipped) to prevent cup from adhering to battery - No vacuum/magnet is necessary for pushing. DO NOT activate vacuum/magnet switch.  Slowly push battery into rack until fully into compartment.''<br /> <br /> 3. Engage battery safety stop and connect battery to charger as required.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Charged Battery Installation&lt;/u&gt;&lt;/big&gt; ====<br /> 1. Lower extractor to fully lowered position.<br /> <br /> 2. Drive extractor back to lift truck and align roller compartment containing charged battery as performed in steps 1 and 2 of &quot;Discharged Battery Removal&quot;.<br /> <br /> 3. Move charged battery toward lift truck compartment by using powered rollers, verifying precise battery alignment.<br /> <br /> [[File:NOTICE-warn.png|alt=NOTICE|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:NOTICE-warn.png]] '''Many batteries are a tight fit into lift truck battery compartments. Care MUST be taken to ensure alignment is precise to avoid damage to battery, lift truck, and/or battery extractor.'''<br /> <br /> 4. Adjust extractor vertically as well as horizontally, if needed<br /> <br /> 5. Insert battery into lift truck as far as possible using only the powered rollers.<br /> <br /> 6. Rotate extractor arm into compartment and SLOWLY push battery into lift truck.  (Be sure to watch battery cables for interference.)<br /> <br /> 7. Return extractor arm to center of roller bed and lower extractor to fully lowered position.  Drive extractor out of immediate area.<br /> <br /> 8. Turn off key switch, remove key from switch, log out on the HMI display (if equipped with BE-IIoT package) and carefully exit extractor.<br /> <br /> 9. Secure newly installed battery in lift truck and reconnect battery cables.<br /> <br /> 10. Return lift truck to service<br /> {|<br /> ![[File:Caution-Warning.png|alt=CAUTION|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:Caution-Warning.png]]<br /> |'''DO NOT drive the BE into the travel path end stops. The end stops are designed to prevent the BE from accidentally traveling beyond its designated travel path. Driving the BE into the end stops will cause the BE to stop suddenly, possibly causing damage to the end stop, the BE and/or personal injury.'''<br /> |}<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Optional Powered Roller Cutout Operation&lt;/u&gt;&lt;/big&gt; ====<br /> Units equipped with optional Powered Roller Cutout, the powered roller override button must be depressed in addition to actuating the hydraulic valve when a battery disrupts the photo eye(s) at the edge of the battery compartments while using the powered rollers to transfer batteries on and off of the battery extractor.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;IIoT Equipped Units&lt;/u&gt;&lt;/big&gt; ====<br /> Units shipped after February, 2020 are equipped with BE-IIoT (Industrial Internet of Things) package. Operators must log in to the BE-IIoT system using the HMI (Human Machine Interface) display located on the dashboard to operate the extractor.<br /> <br /> When finished operating the extractor, the operator should log out of the BE-IIoT to prevent unauthorized access and/or operation of the extractor.<br /> <br /> == &lt;big&gt;Manual Unloading&lt;/big&gt; ==<br /> '''Lockout/tagout and de-energize all equipment prior to manually unloading any battery.'''<br /> <br /> In the event of power loss or an operational malfunction of the BE not allowing a battery to be unloaded using normal operating procedures, it is recommended a battery be removed from the BE using certified and approved vertical extraction methods and devices.<br /> {|<br /> |[[File:DANGER-warn.png|alt=DANGER|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:DANGER-warn.png]]<br /> |'''Read, understand and observe all safety warnings and procedures related to the vertical extraction device(s) being used.'''<br /> |}<br /> Should the status of the BE not allow for safe vertical extraction (due to position in the battery aisle or level of the inner carriage), only repairs required to safely maneuver the BE to a position allowing for safe vertical extraction should be made.  Once any batteries are safely unloaded, any remaining repairs can be made.<br /> {|<br /> |[[File:DANGER-warn.png|alt=DANGER|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:DANGER-warn.png]]<br /> |'''Extreme care should be taken when working under or around equipment supporting elevated loads. Unexpected movement of the equipment could cause the load and/or equipment to fall. ALWAYS be sure devices of adequate size and strength are in place to prevent any personnel working under the elevated load from being crushed. Serious personal injury or death will occur.'''<br /> |}<br /> <br /> == &lt;big&gt;Spare Parts List&lt;/big&gt; ==<br /> Use only BHS approved replacement parts.<br /> <br /> Refer to the appropriate Spare Parts Kit (vacuum equipped units - Pt# BE-SPKV-TS, magnet equipped units - Pt# BE-SPKM-TS) for the list of items recommended by BHS to have on hand for BE-TS models to minimize any downtime due to minor breakdowns that may occur under normal operating conditions.<br /> <br /> BHS offers many replacement parts kits containing relevant or related parts when replacing certain individual parts or replacing any obsolete / upgraded parts.<br /> <br /> BHS also offers a supplement hose kit (Pt# 80342003) which contains an assortment of hoses allowing any hose on the extractor to be replaced immediately with a temporary hose of equal length or longer. After the extractor is back up and running, the failed hose can be taken to have an exact replacement made. Once the new hose is made and installed, the temporary hose can be returned to the kit for future use.<br /> <br /> Go to [[www.bhs1.com]] and click &quot;Parts&quot; for all the latest parts kits and corresponding installation instructions (if applicable).<br /> <br /> BHS recommends that a full maintenance inspection report similar to the one provided be done at least once a month.<br /> <br /> Any parts found to be excessively worn or damaged should promptly be replaced unless said parts pose a safety risk to the operator and/or extractor, in which case the unit should be removed from service until the problem(s) are remedied (See<br /> <br /> Operator's Daily Checklist.)<br /> <br /> ''Note: Spare parts kits contain parts for the most current machine design/configuration. Due to continuous design and manufacturing updates and improvements, not all the parts in the spare parts kits may be compatible with older units. Consult factory when ordering spare or replacement parts for existing units in the field to ensure part compatibility.''<br /> <br /> = &lt;big&gt;Parts Sections&lt;/big&gt; =<br /> <br /> == &lt;big&gt;Chassis&lt;/big&gt; ==<br /> <br /> === &lt;big&gt;&lt;u&gt;Equalization Components&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Equalization Components.png|alt=BE-TS Chassis Equalization|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PT0222-1<br /> |LINK-CONNECTING-#60<br /> |<br /> |<br /> |8<br /> |-<br /> |2<br /> |HW0017<br /> |NUT-HEX-3/4-10<br /> |<br /> |<br /> |8<br /> |-<br /> |3<br /> |HW0115<br /> |WASHER-LOCK-3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |43097001<br /> |STUD-ANCHOR-5&quot;<br /> |<br /> |''Upper''<br /> |4<br /> |-<br /> |5<br /> |HW0020<br /> |NUT-JAM-3/4-10<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43097002<br /> |STUD-ANCHOR-2&quot;<br /> |<br /> |''Lower''<br /> |4<br /> |-<br /> |7<br /> |00158001-14<br /> |CHAIN-ROLLER-#60<br /> |<br /> |<br /> |4<br /> |}<br /> [[File:BE-TS Equalization Components - 1.0.2.png|alt=BE-TS Chassis Equalization 2|frameless|575x575px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PT0416<br /> |COLLAR-SHAFT-1 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |2<br /> |43097006<br /> |KEY-3/8&quot; X 2 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |PT0224<br /> |SPROCKET-60B12 X 1 1/2&quot;<br /> |<br /> |''Keyed in line''<br /> |8<br /> |-<br /> |4<br /> |PT0405<br /> |FLANGE BEARING-2 BOLT-1 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1 1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |6<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> | rowspan=&quot;4&quot; |7<br /> |43127001<br /> |SHAFT-EQUALIZATION-81.75&quot;<br /> |<br /> |''BE-24-2-TS''<br /> |2<br /> |-<br /> |43327001<br /> |SHAFT-EQUALIZATION-105.75&quot;<br /> |<br /> |''BE-36-2-TS''<br /> |2<br /> |-<br /> |44327001<br /> |SHAFT-EQUALIZATION-117.75&quot;<br /> |<br /> |''BE-42-2-TS''<br /> |2<br /> |-<br /> |44527001<br /> |SHAFT-EQUALIZATION-75.75&quot;<br /> |<br /> |''BE-42-1-TS''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |8<br /> |PT0503<br /> |BEARING-FLANGED LOAD-2 1/4&quot;<br /> |<br /> |''Used after December 2003''<br /> |8<br /> |-<br /> |43026001<br /> |BEARING-FLANGED LOAD-2 1/4&quot; ''(MACHINED)''<br /> |<br /> |''Used prior to December 2003''<br /> |8<br /> |-<br /> |9<br /> |HW0025<br /> |NUT-JAM-7/8-14<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0117<br /> |WASHER-LOCK-7/8&quot; ''(NOT SHOWN)''<br /> |<br /> |''Used prior to August 2002''<br /> |8<br /> |}<br /> <br /> === &lt;u&gt;'''&lt;big&gt;Bridge &amp; Cross Bar&lt;/big&gt;'''&lt;/u&gt; ===<br /> [[File:BE-TS Bridge and Cross Bar.png|alt=BE-TS Bridge and Cross Bar|frameless|524x524px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1 1/4&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |2<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |20<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |20<br /> |-<br /> |4<br /> |HW0515<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |''Fully Threaded''<br /> |8<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> === &lt;u&gt;'''&lt;big&gt;Lift Cylinder Connections&lt;/big&gt;'''&lt;/u&gt; ===<br /> [[File:BE-TS Lift Cylinder Connections.png|alt=BE-TS Lift Cylinder Connections|frameless|589x589px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |00158001-13<br /> |CHAIN-ROLLER-#80<br /> |<br /> |<br /> |4<br /> |-<br /> |2<br /> |HW0014<br /> |NUT-HEX-1-8<br /> |<br /> |<br /> |8<br /> |-<br /> |3<br /> |43897002<br /> |STUD-LIFT-INNER FRAME<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |PT0204<br /> |LINK-CONNECTING-#80<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |43897001<br /> |STUD-LIFT-OUTER FRAME<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43815018<br /> |BRACKET-CYLINDER SUPPORT<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |SS0761<br /> |U-BOLT-CYLINDER MOUNTING<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |12<br /> |-<br /> |9<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |10<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |8<br /> |-<br /> | rowspan=&quot;2&quot; |11<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |<br /> |''Idler caster end of unit'' <br /> |2<br /> |-<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |''Drive wheel end of unit'' <br /> |2<br /> |-<br /> |12<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |14<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |43822002<br /> |CLEVIS ASSEMBLY<br /> |<br /> |''Sold as assembly only''<br /> |4<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Guidance Arm&lt;/big&gt;&lt;/u&gt;''' ===<br /> [[File:BE-TS Guidance Arm.png|alt=BE-TS Guidance Arm|frameless|562x562px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> ! colspan=&quot;2&quot; |NO. REQ<br /> |-<br /> |1<br /> |43015011<br /> |GUIDE ARM WELDMENT, 2 ROLLER<br /> |<br /> |<br /> |2<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |2<br /> |43017025<br /> |SPACER-GUIDE ARM<br /> |<br /> |''† 1/2&quot; thick''<br /> |4<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |3<br /> |41215204<br /> |GUIDE ARM WELDMENT, 4 ROLLER<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |2<br /> |-<br /> |4<br /> |41217274<br /> |SPACER-GUIDE ARM<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |4<br /> |-<br /> |5<br /> |43012007<br /> |CAM ROLLER-1 3/4&quot;<br /> |<br /> |<br /> |4<br /> |8<br /> |-<br /> |6<br /> |HW0115<br /> |WASHER-LOCK-3/4&quot;<br /> |<br /> |<br /> |4<br /> |8<br /> |-<br /> |7<br /> |HW0011<br /> |NUT-HEX-3/4-16<br /> |<br /> |<br /> |4<br /> |8<br /> |-<br /> |8<br /> |HW0509<br /> |BOLT-HHCS-1/2-13 X 4-1/2&quot;<br /> |<br /> |<br /> |4<br /> |6<br /> |-<br /> |9<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |6<br /> |-<br /> |10<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |4<br /> |6<br /> |-<br /> |11<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |4<br /> |6<br /> |-<br /> |12<br /> |41215234<br /> |GUIDE ARM WELDMENT (POLY)<br /> |<br /> |<br /> |2<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |13<br /> |41217317<br /> |POLY SLIDE MOUNTING BLOCK<br /> |<br /> |<br /> |4<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |14<br /> |41217318<br /> |POLY SLIDE<br /> |<br /> |<br /> |4<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |15<br /> |HW0501<br /> |BOLT-HHCS-1/2-13 X 1&quot;<br /> |<br /> |<br /> |12<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |16<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |12<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |17<br /> |91253A546<br /> |BOLT FHSCS-1/4-20 X 1-1/2&quot;<br /> |<br /> |<br /> |8<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |18<br /> |HW0003<br /> |NUT-NILN-1/4-20<br /> |<br /> |<br /> |8<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> ! colspan=&quot;7&quot; |NOTES<br /> |-<br /> | colspan=&quot;7&quot; |''† Older units equipped with (1) 1&quot; thick spacer per guide arm bracket.'' <br /> |-<br /> | colspan=&quot;7&quot; |''†† Multiple styles of guide arms have been utilized on extractors. Refer to the parts diagrams for correct replacement parts.'' <br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Roller Bed Componenets&lt;/big&gt;&lt;/u&gt;''' ===<br /> ==== '''&lt;big&gt;''Idler Rollers''&lt;/big&gt;''' ====<br /> [[File:BE-TS Idler Rollers.png|alt=BE-TS Idler Rollers|frameless|746x746px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;3&quot; |1<br /> |43182001<br /> |LEAD ROLLER ASSEMBLY-24&quot;<br /> |<br /> |''With alignment groove''<br /> |4<br /> |-<br /> |43382001<br /> |LEAD ROLLER ASSEMBLY-36&quot;<br /> |<br /> |''With alignment groove''<br /> |4<br /> |-<br /> |43482001<br /> |LEAD ROLLER ASSEMBLY-42&quot;<br /> |<br /> |''With alignment groove''<br /> |4<br /> |-<br /> | rowspan=&quot;3&quot; |2<br /> |43182002<br /> |IDLER ROLLER ASSEMBLY-24&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |43382002<br /> |IDLER ROLLER ASSEMBLY-36&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |43482002<br /> |IDLER ROLLER ASSEMBLY-42&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> | rowspan=&quot;3&quot; |3<br /> |43187002<br /> |SHAFT-HEX-.75&quot; X 25.75&quot;<br /> |<br /> |''24&quot; compartments''<br /> |8<br /> |-<br /> |43387002<br /> |SHAFT-HEX-.75&quot; X 37.75&quot;<br /> |<br /> |''36&quot; compartments''<br /> |8<br /> |-<br /> |43487002<br /> |SHAFT-HEX-.75&quot; X 43.75&quot;<br /> |<br /> |''42&quot; compartments''<br /> |8<br /> |-<br /> | rowspan=&quot;3&quot; |4<br /> |43187003<br /> |SHAFT-HEX-.75&quot; X 27.5&quot;<br /> |<br /> |''24&quot; compartments''<br /> |4<br /> |-<br /> |43387003<br /> |SHAFT-HEX-.75&quot; X 39.5&quot;<br /> |<br /> |''36&quot; compartments''<br /> |4<br /> |-<br /> |43487003<br /> |SHAFT-HEX-.75&quot; X 45.5&quot;<br /> |<br /> |''42&quot; compartments''<br /> |4<br /> |-<br /> |5<br /> |HW1058<br /> |PIN-HITCH<br /> |<br /> |<br /> |24<br /> |}<br /> '''&lt;big&gt;''Powered Rollers''&lt;/big&gt;'''<br /> <br /> [[File:BE-TS Powered Rollers.png|alt=BE-TS Powered Rollers|frameless|546x546px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;3&quot; |1<br /> |43182003<br /> |POWERED ROLLER-24&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |43382003<br /> |POWERED ROLLER-36&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |43485003<br /> |POWERED ROLLER-42&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |2<br /> |43087001<br /> |JOURNAL-POWERED ROLLER<br /> |<br /> |<br /> |10<br /> |-<br /> |3<br /> |PT0404<br /> |FLANGE BEARING-3-BOLT-1&quot;<br /> |<br /> |<br /> |20<br /> |-<br /> |4<br /> |HW0321<br /> |BOLT-HHCS-5/16-18 X 1 1/4&quot;<br /> |<br /> |<br /> |60<br /> |-<br /> |5<br /> |HW0105<br /> |WASHER-LOCK-5/16&quot;<br /> |<br /> |<br /> |60<br /> |-<br /> |6<br /> |HW0004<br /> |NUT-HEX-5/16-18<br /> |<br /> |<br /> |60<br /> |-<br /> |7<br /> |PT0033<br /> |SPROCKET-35B18 X 1&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |8<br /> |00197028<br /> |KEY-1/4&quot; X 1 1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |00158001-16<br /> |CHAIN-ROLLER-#35<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |PT0031<br /> |LINK-CONNECTING-#35<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |PT0418<br /> |COLLAR-SHAFT-1&quot;<br /> |<br /> |<br /> |10<br /> |}<br /> [[File:BE-TS Powered Rollers Detail A.png|alt=BE-TS Powered Rollers Detail A|frameless|542x542px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0120<br /> |MOTOR-HYDRAULIC-160CC<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW1071<br /> |KEY-WOODRUFF-#808 STD<br /> |<br /> |''Supplied with Item 1''<br /> |A/R<br /> |-<br /> |3<br /> |H1544<br /> |ADAPTER-#6 JICM X #10 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |18<br /> |-<br /> |5<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |18<br /> |-<br /> |6<br /> |43017004<br /> |PLATE-MOTOR MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |PT0302-1<br /> |COUPLING BODY-#40 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |PT0301<br /> |CHAIN-COUPLING-#40<br /> |<br /> |''Includes connecting pin''<br /> |2<br /> |-<br /> |9<br /> |00197026<br /> |KEY-1/4&quot; X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43097003<br /> |KEY-1/4&quot; X 5/8&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Hose Carrier&lt;/big&gt;&lt;/u&gt;''' ===<br /> [[File:BE-TS Hose Carrier.png|alt=BE-TS Hose Carrier|frameless|550x550px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PT0629<br /> |CARRIER TRACK<br /> |<br /> |''81 links required''<br /> |10'<br /> |-<br /> |2<br /> |PT0631<br /> |BRACKET-UPPER MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0212<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0032<br /> |NUT-NILN-#10-24<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |PT0630<br /> |BRACKET-LOWER MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |7<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |43817056-2<br /> |BRACKET-CARRIER TRACK MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |HW0401<br /> |BOLT-HHCS-3/8-16 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |14<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |43817057<br /> |PLATE-CARRIER TRACK SUPPORT<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === &lt;big&gt;'''&lt;u&gt;Cable Retractor&lt;/u&gt;'''&lt;/big&gt; ===<br /> [[File:BE-TS Cable Retractor.png|alt=BE-TS Cable Retractor|frameless|585x585px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |CCR-12HD<br /> |TAKE UP REEL-CARRIER TRACK<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Operator Gate&lt;/big&gt;&lt;/u&gt;''' ===<br /> [[File:BE-TS Discontinued Drop Bar Operator Gate.png|alt=BE-TS Discontinued Drop Bar Operator Gate|frameless|568x568px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43015004<br /> |GATE-OPERATOR<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0407<br /> |BOLT-HHCS-3/8-16 X 2 3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |<br /> |<br /> |1<br /> |}<br /> [[File:BE-TS Operator Gate Continued.png|alt=BE-TS Operator Gate Continued|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43017064-2<br /> |LATCH-SWING GATE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0418<br /> |BOLT-HHCS-3/8-16 X 2 1/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0031<br /> |NUT-LOCK-3/8-16<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |N/A<br /> |HINGE-SPRING<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |5<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |HW1037<br /> |STOP-GATE<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0003<br /> |NUT-NILN-1/4-20<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |N/A<br /> |TORSION SPRING<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |11<br /> |HW0816<br /> |SCREW-HHCS-SELF DRILLING-#10 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |43806001<br /> |ANTI-FATIGUE MAT<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |43017058-2<br /> |THRESHOLD<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |HW0107<br /> |WASHER-LOCK3/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |HW9002<br /> |GAS SPRING<br /> |80292015<br /> |<br /> |1<br /> |-<br /> |19<br /> |43017086-2<br /> |BRACKET-MOUNTING-SPRING<br /> |80292015<br /> |<br /> |2<br /> |-<br /> |20<br /> |HW0815<br /> |SCREW-SELF DRILLING-#12-24 X 1&quot; T-4<br /> |80292015<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Part Discontinued. Spring Hinge and Torsion Spring must be replaced with Gas Spring Kit.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Guarding&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Outer Carriage Guards&lt;/big&gt;''''' ====<br /> <br /> ===== '''''1-Piece Outside Frame Guarding''''' =====<br /> [[File:BE-TS Outside Frame Guard 1-Piece.png|alt=BE-TS Outside Frame Guard 1-Piece|frameless|550x550px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817038<br /> |GUARD-FAR END-TOP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817037<br /> |GUARD-FAR END-MIDDLE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43817035<br /> |GUARD-FAR END-BOTTOM<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |33<br /> |}<br /> <br /> ===== '''''Split Outside Frame Guarding''''' =====<br /> [[File:BE-TS Outside Split Frame Guard.png|alt=BE-TS Outside Split Frame Guard|frameless|562x562px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817103<br /> |GUARD-FAR END-TOP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817102<br /> |GUARD-FAR END-MIDDLE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43817101<br /> |GUARD-FAR END-BOTTOM<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |37<br /> |}<br /> <br /> ==== '''&lt;big&gt;''Inner Carriage Guards''&lt;/big&gt;''' ====<br /> <br /> ===== '''''Inner Carriage Guards (Rotary Actuator)''''' =====<br /> [[File:BE-TS Inner Carriage Guard Rotary.png|alt=BE-TS Inner Carriage Guard (Rotary Actuator Units)|frameless|554x554px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817041-2<br /> |GUARD-FRONT-OPERATOR CONSOLE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817042-2<br /> |GUARD-INNER-FRAME<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |43014006-2<br /> |GUARD-LINEAR DRIVE SCREW<br /> |<br /> |<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |4<br /> |43017010-2<br /> |GUARD-SIDE-ARM CARRIER SHAFT<br /> |<br /> |<br /> |2<br /> |-<br /> |44517002-2<br /> |GUARD-SIDE-ARM CARRIER SHAFT<br /> |<br /> |''† Single compartment units only''<br /> |1<br /> |-<br /> |5<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |34<br /> |-<br /> |6<br /> |43017009-2<br /> |BRACKET-SCREW GUARD MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Single Compartment Guard replaces standard, Far Side Arm Carrier Shaft Guard.'' <br /> |}<br /> '''''Inner Carriage Guards (Helical Actuator)'''''<br /> <br /> [[File:BE-TS Inner Carriage Guard Helical Actuator.png|alt=BE-TS Inner Carriage Guard (Helical Actuator Units)|frameless|547x547px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817041-2<br /> |GUARD-FRONT-OPERATOR CONSOLE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817042-2<br /> |GUARD-INNER-FRAME<br /> |<br /> |<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |3<br /> |43017081-2<br /> |GUARD-SIDE-ARM CARRIER SHAFT<br /> |<br /> |<br /> |2<br /> |-<br /> |44517003-2<br /> |GUARD-SIDE-ARM CARRIER SHAFT<br /> |<br /> |''† Single compartment units only''<br /> |1<br /> |-<br /> |4<br /> |43017080-2<br /> |BRACKET-SIDE GUARD MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |43017082-3<br /> |MOUNT-CHAIN GUARD-LEAD SCREW<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43017082-4<br /> |MOUNT-CHAIN GUARD-LEAD SCREW<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |43017083-2<br /> |GUARD-CHAIN-LEAD SCREW<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0347<br /> |BOLT-BHSCS-1/4-20 X 3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |28<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Single Compartment Guard replaces standard, Far Side Arm Carrier Shaft Guard.'' <br /> |}<br /> <br /> ==== '''&lt;big&gt;''Dash &amp; Platform Guards''&lt;/big&gt;''' ====<br /> [[File:BE-TS Dash &amp; Platform Guards.png|alt=BE-TS Dash &amp; Platform Guards|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41614004-2<br /> |DASHBOARD-OPERATOR CONSOLE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817040<br /> |KICK PLATE-OPERATOR CONSOLE<br /> |<br /> |''41.5&quot; high''<br /> |1<br /> |-<br /> |3<br /> |43817086-2<br /> |DASHBOARD-OPERATOR CONSOLE<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43817088<br /> |KICK PLATE-OPERATOR CONSOLE<br /> |<br /> |''33.5&quot;'' ''high''<br /> |1<br /> |-<br /> |5<br /> |43817110-2<br /> |FRAME-DASHBOARD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |A/R<br /> |PLATE-DASHBOARD<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |7<br /> |HW0060<br /> |NUT-CLIP-#10-24<br /> |<br /> |<br /> |12<br /> |-<br /> |8<br /> |SS0114<br /> |BHSCS-#10-24 X 1/2&quot;-SST<br /> |<br /> |<br /> |12<br /> |-<br /> |9<br /> |PL0602<br /> |VINYL EDGING<br /> |<br /> |''At Foot Switch (Not shown)'' <br /> |1'<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Consult factory''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Lift Cylinder Guards&lt;/big&gt;''''' ====<br /> [[File:BE-TS Lift Cylinder Guards.png|alt=BE-TS Lift Cylinder Guards|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;2&quot; |1<br /> |43815016<br /> |GUARD-CLEVIS<br /> |<br /> |Operator right / Far left<br /> |2<br /> |-<br /> |43815017<br /> |GUARD-CLEVIS<br /> |<br /> |Operator left / Far right<br /> |2<br /> |-<br /> |2<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Labels &amp; Placards&lt;/big&gt;&lt;/u&gt;''' ===<br /> [[File:BE-TS Labels &amp; Placards Chassis.png|alt=BE-TS Labels &amp; Placards Chassis|frameless|546x546px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |00196616<br /> |LABEL-&quot;NO RIDERS ALLOWED&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |00196210<br /> |LABEL-WARNING-&quot;OPERATION BY AUTHORIZED PERSONNEL ONLY&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43696001<br /> |PLACARD-OFF / ON<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43096018<br /> |PLACARD-RACK LEVEL ASSIST<br /> |<br /> |''† If equipped''<br /> |1<br /> |-<br /> |5<br /> |43096015<br /> |PLACARD-PLATFORM RAISE / LOWER<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43096010<br /> |PLACARD-HORN<br /> |<br /> |''† If equipped''<br /> |1<br /> |-<br /> |7<br /> |43096016<br /> |PLACARD-DRIVE / ARM ROTATION<br /> |<br /> |<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |8<br /> |43096012<br /> |PLACARD-VACUUM OFF / ON<br /> |<br /> |''Vacuum units only''<br /> |1<br /> |-<br /> |43096011<br /> |PLACARD-MAGNET OFF / ON<br /> |<br /> |''Magnet units only (Not shown)''<br /> |1<br /> |-<br /> |9<br /> |43096017<br /> |PLACARD-POWERED ROLLER CUTOUT OVERRIDE<br /> |<br /> |''† If equipped''<br /> |1<br /> |-<br /> |10<br /> |43096013<br /> |PLACARD-POWERED ROLLERS / ARM TRAVERSE<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |00196633<br /> |LABEL-NOTICE-&quot;IN LINE VACUUM FILTER...&quot;<br /> |<br /> |''(1) per side (Vacuum units only)''<br /> |2<br /> |-<br /> |12<br /> |SM-1197<br /> |LABEL-ARM POSITION ARROW<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |00196609<br /> |LABEL-NOTICE-&quot;ARM MUST BE POSITIONED BETWEEN ARROWS...&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |00196602<br /> |LABEL-NOTICE-&quot;LUBRICATION POINTS ON UNDERSIDE&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |00196218<br /> |LABEL-WARNING-&quot;ELECTRICAL VOLTAGE HAZARD&quot;<br /> |<br /> |''Magnet units only''<br /> |1<br /> |-<br /> |16<br /> |00196238<br /> |LABEL-WARNING-&quot;STRONG MAGNETIC<br /> <br /> FIELD/DO NOT USE WITH PACEMAKER&quot;<br /> |<br /> |''†† Magnet units only''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Rack Level Assist (LAI), Horn and Powered Roller Cutout (PRC) are optional features. Not all units are equipped with these options.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Pacemaker Warning Label takes the place of the discontinued, Triangular Magnetic Field Label.''<br /> |}<br /> [[File:BE-TS Labels &amp; Placards Frame.png|alt=BE-TS Labels &amp; Placards Frame|frameless|549x549px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |00196004<br /> |LABEL-CAUTION-&quot;WATCH FOR BATTERY AND CHARGER CABLES IN TRAVEL PATH&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |00196216<br /> |LABEL-WARNING-&quot;CHAIN ENTANGLEMENT<br /> <br /> HAZARD&quot;<br /> |<br /> |''(1) per Clevis Guard'' <br /> |4<br /> |-<br /> |3<br /> |00196622<br /> |LABEL-LIFT POINT<br /> |<br /> |''(2) each end''<br /> |4<br /> |-<br /> |4<br /> |00196700<br /> |DECAL-BHS-24&quot; X 7.875&quot;<br /> |<br /> |''Far end (Not shown)''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |5<br /> |00196630<br /> |LABEL-NOTICE-HYD. OIL SPEC. (AW 68)<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |00196645<br /> |LABEL-NOTICE-HYD. OIL SPEC. (AW 32)<br /> |<br /> |''† See notes'' <br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |† Most units shipped prior to December 2014 require AW 68 Hydraulic Oil. Some units shipped prior to December 2014 shipped with AW 32 for low temperature applications.<br /> |}<br /> <br /> == &lt;big&gt;Extractor Arm&lt;/big&gt; ==<br /> {| class=&quot;wikitable&quot;<br /> !SYMBOL<br /> !DESCRIPTION / NOTICE<br /> !ACTUATOR DIAGRAM<br /> |-<br /> |[[File:IOP-400 BE-SL&amp;DS (10-23) Rotary Actuator Symbol.png|alt=Rotary Actuator Symbol|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Rotary_Actuator_Symbol.png]]<br /> |<br /> ==='''&lt;u&gt;&lt;big&gt;Rotary Actuator Symbol&lt;/big&gt;&lt;/u&gt;'''===<br /> Battery Extractors shipped prior to May 2020 are equipped with Rotary Actuator Extractor Arms. Parts Diagrams Specific to the Rotary Actuator design are indicated with the Rotary Actuator symbol.<br /> |[[File:IOP-400 BE-SL&amp;DS (10-23) Rotary Actuator Extractor Arm.png|alt=BE-TS Rotary Actuator|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Rotary_Actuator_Extractor_Arm.png]]<br /> |-<br /> |[[File:IOP-400 BE-SL&amp;DS (10-23) Helical Actuator Symbol.png|alt=Helical Actuator Symbol|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Helical_Actuator_Symbol.png]]<br /> |<br /> ===&lt;big&gt;'''&lt;u&gt;Helical Actuator Symbol&lt;/u&gt;'''&lt;/big&gt;===<br /> Battery Extractors shipped from May 2020 to Present are equipped with Helical Actuator Extractor Arms. Parts Diagrams Specific to the Rotary Actuator design are indicated with the Helical Actuator Symbol.<br /> |[[File:IOP-400 BE-SL&amp;DS (10-23) Helical Actuator Extractor Arm.png|alt=BE-TS Helical Actuator|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Helical_Actuator_Extractor_Arm.png]]<br /> |}<br /> ===&lt;big&gt;&lt;u&gt;Vacuum Components &amp; Swing Arms&lt;/u&gt;&lt;/big&gt;===<br /> ====''&lt;big&gt;Vacuum Arms (Rotary Actuator)&lt;/big&gt;''====<br /> [[File:BE-TS Vacuum Arms (Rotary Actuator).png|alt=BE-TS Vacuum Arms (Rotary Actuator)|frameless|619x619px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;2&quot; |1<br /> |N/A<br /> |ARM-PUSH/PULL-30&quot;<br /> |<br /> |''&lt;sup&gt;†&lt;/sup&gt; Discontinued''<br /> |1<br /> |-<br /> |N/A<br /> |ARM-PUSH/PULL-36&quot;<br /> |<br /> |''&lt;sup&gt;†&lt;/sup&gt; Discontinued''<br /> |1<br /> |-<br /> |2<br /> |HW0509<br /> |BOLT-HHCS-1/2-13 X 4 1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |P0505<br /> |BUSHING-RED-#6 NPT X #4 FNPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |P0402<br /> |HOSE BARB-1/4 X #4 MNPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0428<br /> |STUD-VACUUM-3/8-16 X 5&quot;<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |9<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |HW-KIT-2<br /> |<br /> |40<br /> |-<br /> |10<br /> |HW1001<br /> |SPRING-3/8&quot;<br /> |HW-KIT-2<br /> |<br /> |24<br /> |-<br /> |11<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |12<br /> |HW0424<br /> |NUT-JAM-3/8-16<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |REF<br /> |43052006<br /> |ADJUSTABLE PUSH/PULL ARM<br /> |<br /> |''Includes Items 13 through 17''<br /> |1<br /> |-<br /> |13<br /> |43057034<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |43055008<br /> |VACUUM CUP MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''&lt;sup&gt;†&lt;/sup&gt; One-piece Arms no longer available. Must replace with Adjustable Arm.''<br /> |}<br /> <br /> ====&lt;big&gt;''Vacuum Cups''&lt;/big&gt;====<br /> [[File:BE-TS Vacuum Cups.png|alt=Vacuum Cups|frameless|563x563px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;4&quot; |A/R<br /> |00162004<br /> |VACUUM CUP-10&quot; 3-PC (STANDARD)<br /> |<br /> |''&lt;sup&gt;†&lt;/sup&gt; Includes Items 1 through 4''<br /> | rowspan=&quot;4&quot; |A/R<br /> |-<br /> |00162003<br /> |VACUUM CUP-12&quot; 3-PC (STANDARD)<br /> |<br /> |''&lt;sup&gt;†&lt;/sup&gt; Includes Items 4 through 7''<br /> |-<br /> |00162007<br /> |VACUUM CUP-10&quot; 3-PC, REINFORCED<br /> |<br /> |''Includes Items 1,3,4 &amp; 8''<br /> |-<br /> |00162005<br /> |VACUUM CUP-12&quot; 3-PC, REINFORCED<br /> |<br /> |''Includes Items 4,5,7 &amp; 9''<br /> |-<br /> |1<br /> |00164006<br /> |CASTING-10&quot; VACUUM CUP<br /> |<br /> | rowspan=&quot;3&quot; |''10&quot; cup only''<br /> |1<br /> |-<br /> |2<br /> |00164004<br /> |SEAL-RUBBER-10&quot;<br /> |<br /> |1<br /> |-<br /> |3<br /> |00165002<br /> |PLATE-FRONT-10&quot;<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0311<br /> |BOLT-FHSCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |00166001<br /> |CASTING-12&quot; VACUUM CUP<br /> |<br /> | rowspan=&quot;3&quot; |''12&quot; cup only''<br /> |1<br /> |-<br /> |6<br /> |00164001<br /> |SEAL-RUBBER-12&quot;<br /> |<br /> |1<br /> |-<br /> |7<br /> |00165001<br /> |PLATE-FRONT-12&quot;<br /> |<br /> |1<br /> |-<br /> |8<br /> |00164007<br /> |SEAL-RUBBER-10&quot;-REINFORCED<br /> |<br /> |<br /> |A/R<br /> |-<br /> |9<br /> |00167003<br /> |SEAL-RUBBER-12&quot;-REINFORCED<br /> |<br /> |<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''&lt;sup&gt;†&lt;/sup&gt; 10&quot; and 12&quot; 1-Piece Cups no longer available. Must replace with 3-Piece Cup. Verify required cup size prior to ordering.''<br /> |}<br /> <br /> ====&lt;big&gt;''Swing Arms (Rotary Actuator)''&lt;/big&gt;====<br /> [[File:BE-TS Swing Arms (Rotary Actuator).png|alt=BE-TS Swing Arms (Rotary Actuator)|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> |ITEM<br /> |BHS PART NUMBER<br /> |DESCRIPTION<br /> |REF. KIT NO.<br /> |NOTES<br /> |NO. REQ<br /> |-<br /> | rowspan=&quot;3&quot; |1<br /> |45055001<br /> |TIE PLATE-SWING ARM<br /> |<br /> |BE-24-2-TS<br /> |1<br /> |-<br /> |45255001<br /> |TIE PLATE-SWING ARM<br /> |<br /> |BE-36-2-TS (NOT SHOWN)<br /> |1<br /> |-<br /> |45355001<br /> |TIE PLATE-SWING ARM<br /> |<br /> |BE-42-2-TS (NOT SHOWN)<br /> |1<br /> |-<br /> |2<br /> |43055004<br /> |SWING ARM-RHS<br /> |†<br /> |NOT SOLD INDIVIDUALLY<br /> |1<br /> |-<br /> |3<br /> |43055002<br /> |SWING ARM-LHS<br /> |†<br /> |NOT SOLD INDIVIDUALLY<br /> |1<br /> |-<br /> |4<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0113<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0010<br /> |NUT-JAM-5/8-11<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |PT0413<br /> |COLLAR-SHAFT-3&quot;<br /> |80252001<br /> |<br /> |2<br /> |-<br /> |8<br /> |43027001<br /> |SHAFT-ROTARY ACTUATOR<br /> |80252001<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW1013<br /> |KEY-3/8&quot; X 12&quot;<br /> |80252001<br /> |<br /> |1<br /> |-<br /> |10<br /> |PT0419<br /> |BEARING-SAE 841-2&quot; I.D., 3&quot; OD, 1/8&quot; THICK<br /> |80252001<br /> |<br /> |3<br /> |-<br /> |11<br /> |43052005<br /> |CAP-BEARING<br /> |<br /> |INCLUDES BEARING<br /> |2<br /> |-<br /> |12<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |13<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |14<br /> |43057014<br /> |STANDOFF-WIRE<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |HW0312<br /> |SCREW-SHSS-1/4-20 X 1&quot;-CUP POINT<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |43057003<br /> |CUSHION-SWING ARM<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |43055001<br /> |STOP-SWING ARM<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |20<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |21<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |H1565<br /> |ADAPTER-45 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |23<br /> |H1600<br /> |ADAPTER-90 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |&lt;sup&gt;†&lt;/sup&gt; ''Included in multiple kits.''<br /> |-<br /> | colspan=&quot;6&quot; |See ''Single Compartment Swing Arm Stop for the the Single Compartment Swing Arm Stop.''<br /> |}<br /> <br /> === '''''Vacuum Swing Arm Stop (Rotary Actuator)''''' ===<br /> [[File:BE-TS Single Compartment Swing Arms (Rotary Actuator).png|alt=BE-TS Single Compartment Swing Arms (Rotary Actuator)|frameless|575x575px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |44555001<br /> |STOP-SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43057003<br /> |CUSHION-SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43057008<br /> |SPACER-SWING ARM STOP<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |}<br /> ====''&lt;big&gt;Vacuum Pump (Rotary Actuator)&lt;/big&gt;''====<br /> [[File:BE-TS Vacuum Pumps (Rotary Actuator).png|alt=BE-TS Vacuum Pumps (Rotary Actuator)|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |P0005<br /> |PUMP-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |P0208<br /> |FILTER-HI FLOW<br /> |<br /> |<br /> |3<br /> |-<br /> |3<br /> |P0503<br /> |NIPPLE-#4 NPT-BRASS<br /> |<br /> |<br /> |3<br /> |-<br /> |4<br /> |P0502<br /> |TEE-#4 FNPT-BRASS<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |P0506<br /> |ELBOW-STR-90 DEG-#4 NPT-BRASS<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |P0402<br /> |HOSE BARB-1/4 X #4 NPTM-BRASS<br /> |<br /> |<br /> |6<br /> |-<br /> |7<br /> |P0207<br /> |VALVE-VACUUM RELEASE<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |P0302<br /> |HOSE-VACUUM-1/4&quot; I.D.<br /> |<br /> |''Two 6&quot; pieces''<br /> |1'<br /> |-<br /> |9<br /> |P0302<br /> |HOSE-VACUUM-1/4&quot; I.D.<br /> |<br /> |''Short Arm side''<br /> |1'<br /> |-<br /> |10<br /> |P0302<br /> |HOSE-VACUUM-1/4&quot; I.D.<br /> |<br /> |''Long Arm side''<br /> |2'<br /> |-<br /> |11<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |HW0212<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |E0624<br /> |CONNECTOR-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |15a<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |''Not shown''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |16<br /> |E0501<br /> |CORD-14-4 SW/SOW<br /> |<br /> |''Withtout Ground Connection in Arm''<br /> | rowspan=&quot;2&quot; |15'<br /> |-<br /> |E0514<br /> |CORD-16-5 SW/SOW<br /> |<br /> |<br /> |-<br /> |17<br /> |43057014<br /> |STANDOFF-CABLE<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |HW0206<br /> |SCREW-RHMS-#10-32 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |19<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |20<br /> |43057021<br /> |PLATE-STIFFENER<br /> |†<br /> |<br /> |2<br /> |-<br /> |21<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |†<br /> |<br /> |12<br /> |-<br /> |22<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |†<br /> |<br /> |12<br /> |-<br /> |23<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |†<br /> |<br /> |12<br /> |-<br /> |24<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |†<br /> |''Not shown''<br /> |24<br /> |-<br /> |25<br /> |P0111<br /> |FILTER-VACUUM-INLINE<br /> |<br /> |''Not shown''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |&lt;sup&gt;†&lt;/sup&gt; ''Included in multiple kits.''<br /> |}<br /> ===&lt;u&gt;&lt;big&gt;Rotary Actuator&lt;/big&gt;&lt;/u&gt;===<br /> [[File:BE-TS Rotary Actuator.png|alt=BE-TS Rotary Actuator|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43046001<br /> |ROTARY ACTUATOR<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |80000002<br /> |ROTARY ACTUATOR BASE ASSEMBLY<br /> |<br /> |''Without Actuator''<br /> |1<br /> |-<br /> |2A<br /> |N/A<br /> |VERTICAL CARRIER PLATE-OUTER<br /> |<br /> |''Included with 80000002''<br /> |2<br /> |-<br /> |2B<br /> |N/A<br /> |VERTICAL CARRIER PLATE-INNER<br /> |<br /> |''Included with 80000002''<br /> |1<br /> |-<br /> |2C<br /> |N/A<br /> |CARRIER BASE PLATE<br /> |<br /> |''Included with 80000002''<br /> |1<br /> |-<br /> |3<br /> |HW1070<br /> |PIN-PULL DOWEL-5/8&quot; X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0508<br /> |BOLT-SHCS-1/2-13 X 3/4&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW1045<br /> |PIN-PULL DOWEL-3/8&quot; X 1 1/2&quot;<br /> |<br /> |''Included with 80000002''<br /> |6<br /> |-<br /> |6<br /> |HW0412<br /> |BOLT-SHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |''Included with 80000002''<br /> |12<br /> |-<br /> |7<br /> |H0010<br /> |FITTING-BULKHEAD-3/4-16 X #4 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 NPTM<br /> |<br /> |<br /> |2<br /> |}<br /> ===&lt;u&gt;&lt;big&gt;Carrier Shafts &amp; Bearings ''(Rotary Actuator)''&lt;/big&gt;&lt;/u&gt;===<br /> [[File:BE-TS Rotary Actuator Carrier Shafts.png|alt=BE-TS Carrier Shafts (Rotary Actuator)|frameless|560x560px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43057045<br /> |CARRIER SHAFT-EXTRACTOR ARM<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |2<br /> |43054007<br /> |BEARING-EXTRACTOR ARM CARRIER<br /> |80252002<br /> |''†† See notes''<br /> |4<br /> |-<br /> |3<br /> |HW0412<br /> |BOLT-SHCS-3/8-16 X 1 1/4&quot;<br /> |80252002<br /> |<br /> |16<br /> |-<br /> |4<br /> |PT0413<br /> |COLLAR-SHAFT-3&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |PT0624<br /> |FITTING-ZERK<br /> |80252002<br /> |''Not shown''<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Vacuum_Extended_Reach_(Rotary_Actuator) Vacuum Extended Reach (Rotary Actuator)] section for Extended Reach equipped units.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Carrier_Shafts_&amp;_Bearings Carrier Shafts &amp; Bearings (Helical Actuator)] section for Helical Actuator equipped units.''<br /> |}<br /> <br /> ===&lt;u&gt;&lt;big&gt;Drive Screw Components ''(Rotary Actuator)''&lt;/big&gt;&lt;/u&gt;===<br /> ====''&lt;big&gt;Drive Nut Assembly (Rotary Actuator)&lt;/big&gt;''====<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Drive Nut Assembly Rotary Actuator.png|alt=BE-SL&amp;DS Drive Nut Assembly Rotary Actuator|frameless|537x537px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Drive_Nut_Assembly_Rotary_Actuator.png]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43054006<br /> |DRIVE NUT ASSEMBLY<br /> |80252003<br /> |&lt;sup&gt;''†''&lt;/sup&gt; ''See notes''<br /> |1<br /> |-<br /> |2<br /> |HW0426<br /> |BOLT-SHCS-3/8-16 X 5 1/2&quot;<br /> |80252003<br /> |&lt;sup&gt;''††''&lt;/sup&gt; ''See notes''<br /> |4<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |80252003<br /> |&lt;sup&gt;''††''&lt;/sup&gt; ''See notes''<br /> |4<br /> |-<br /> |4<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |80252003<br /> |&lt;sup&gt;''††''&lt;/sup&gt; ''See notes''<br /> |4<br /> |-<br /> |5<br /> |PT0624<br /> |FITTING-ZERK<br /> |80252003<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''&lt;sup&gt;†&lt;/sup&gt; See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Drive_Nut_Assembly_(Helical_Actuator) Drive Nut Assembly (Helical Actuator)] section for Helical Actuator equipped units.''<br /> |-<br /> | colspan=&quot;6&quot; |''&lt;sup&gt;††&lt;/sup&gt; It is recommended to replace mounting hardware when replacing Drive Nut Assembly.''<br /> |}<br /> ====''&lt;big&gt;Drive Screw&lt;/big&gt;''====<br /> =====''[Current] Drive Screw Assembly (Frame #'s 374 to Present)''=====<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Drive Screw Rotary Current.png|alt=Current BE-SL &amp; BE-DS Drive Screw (Rotary Actuator)|frameless|531x531px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Drive_Screw_Rotary_Current.png]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43024001<br /> |SCREW-LINEAR DRIVE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |PT0119<br /> |SPROCKET-50B15 X 1 3/16&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43097004<br /> |KEY-1/4 X 7/8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |00158001-15<br /> |CHAIN-ROLLER-#50<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |PT0102<br /> |LINK-CONNECTING-#50<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |PT0406<br /> |FLANGE BEARING-4 BOLT-1 3/16&quot;<br /> |<br /> |''Alloy casting''<br /> |2<br /> |-<br /> |7<br /> |HW0503<br /> |BOLT-HHCS-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |PT0107<br /> |SPROCKET-50B15 X 1&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HC0121<br /> |MOTOR-HYDRAULIC-100CC<br /> |<br /> |''SAE 2-Bolt mount''<br /> |1<br /> |-<br /> |11<br /> |H1605<br /> |ADAPTER-90 DEG-#6 JICM X #10 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW1071<br /> |KEY-WOODRUFF-#808 STD<br /> |<br /> |''Supplied with Item 10''<br /> |A/R<br /> |-<br /> |13<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |14<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |15<br /> |43017007<br /> |PLATE-MOUNTING-SCREW DRIVE MOTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |43057019<br /> |PLATE-COVER<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0415<br /> |BOLT-SHCS-3/8-16 X 3/4&quot;<br /> |<br /> |<br /> |8<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> ! colspan=&quot;6&quot; |ITEMS BELOW ARE REQUIRED FOR REPLACING THE LINEAR DRIVE<br /> <br /> SCREW ON UNITS WITH FRAME #'S OF 373 AND EARLIER<br /> |-<br /> ! colspan=&quot;6&quot; |LINEAR DRIVE SCREW UPDATE KIT<br /> |-<br /> |REF<br /> |80252011<br /> |UPGRADE KIT<br /> |<br /> |<br /> |1<br /> |-<br /> |1<br /> |43024001<br /> |SCREW-LINEAR DRIVE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |PT0119<br /> |SPROCKET-50B15 X 1 3/16&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43097004<br /> |KEY-1/4&quot; X 7/8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |PT0406<br /> |FLANGE BEARING-4 BOLT-1 3/16&quot;<br /> |<br /> |''Alloy casting''<br /> |2<br /> |-<br /> |7<br /> |HW0503<br /> |BOLT-HHCS-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |16<br /> |43057019<br /> |PLATE-COVER<br /> |<br /> |<br /> |2<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |43057022<br /> |SHIM-18GA<br /> |<br /> |''May not be required'' - ''(Not shown)''<br /> |2<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |43057018<br /> |TEMPLATE-BEARING MOUNT PATTERN<br /> |<br /> |''(Not shown)''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |43057020<br /> |SPACER PLATE<br /> |<br /> |''(Not shown)''<br /> |2<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |80000015<br /> |INSTRUCTION DETAIL<br /> |<br /> |''(Not shown)''<br /> |REF<br /> |}<br /> <br /> =====''[Discontinued] Drive Screw Assembly (Frame #'s 373 and Earlier)''=====<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Drive Screw (Rotary Actuator) Discontinued.png|alt=Discontinued BE-SL &amp; BE-DS Drive Screw (Rotary Actuator)|frameless|532x532px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Drive_Screw_(Rotary_Actuator)_Discontinued.png]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |SCREW-LINEAR DRIVE (DISCONTINUED)<br /> |<br /> |''See 80252011 Upgrade Kit''<br /> |1<br /> |-<br /> |2<br /> |PT0118<br /> |SPROCKET-50B12 X 1 3/16&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43097004<br /> |KEY-1/4&quot; X 7/8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |00158001-15<br /> |CHAIN-ROLLER-#50<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |PT0102<br /> |LINK-CONNECTING-#50<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43057016<br /> |BLOCK-BEARING RETAINER<br /> |<br /> |<br /> |2<br /> |-<br /> |6a<br /> |PT0414<br /> |RACE-TAPERED ROLLER BEARING<br /> |<br /> |''Included with 43057016''<br /> |2<br /> |-<br /> |7<br /> |PT0623<br /> |SEAL-GREASE<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0416<br /> |BOLT-SHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |PT0415<br /> |BEARING-TAPERED ROLLER<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW1050<br /> |NUT-LOCK<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |43057017<br /> |PLATE-COVER<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0415<br /> |BOLT-SHCS-3/8-16 X 3/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |13<br /> |PT0624<br /> |FITTING-ZERK<br /> |<br /> |<br /> |2<br /> |}<br /> ===&lt;big&gt;&lt;u&gt;Hose Carrier Plate&lt;/u&gt;&lt;/big&gt;===<br /> [[File:BE-TS Hose Carrier Plate.png|alt=BE-TS Hose Carrier Plate|frameless|554x554px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43915018<br /> |PLATE-HOSE CARRIER<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |PT0618<br /> |BRACKET-FIXED END<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |PT0617<br /> |HOSE CARRIER<br /> |<br /> |''20 links required''<br /> |3 FT<br /> |-<br /> |5<br /> |PT0619<br /> |BRACKET-MOVING END<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |9<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |10<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HC0262<br /> |VALVE-CROSS PORT RELIEF<br /> |<br /> |''Includes cartridges''<br /> |1<br /> |-<br /> |12a<br /> |43846002<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''†† For Item 12 (Not shown)''<br /> |2<br /> |-<br /> |13<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |H1560<br /> |ADAPTER-45 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |E1329<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |''PVC - Includes cover''<br /> |1<br /> |-<br /> |19<br /> |HW0212<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |20<br /> |HW0102<br /> |WASHER-FLAT-#10-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |21<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |22<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |23<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |''For Items 21 &amp; 22 (Not shown)''<br /> |3<br /> |-<br /> |24<br /> |HW1076<br /> |BOLT-FHSCS-3/8-16 X 1&quot;<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Units built prior to February 2014 without extended reach option use (4) HW0403 mounting bolts.''<br /> <br /> ''†† Cartridges are for replacement only.''<br /> |}<br /> <br /> === &lt;big&gt;'''&lt;u&gt;Magnet Components ''(Rotary Actuator)''&lt;/u&gt;'''&lt;/big&gt; ===<br /> <br /> ==== '''''&lt;big&gt;[Discontinued] Magnet Arm Configuration&lt;/big&gt;''''' ====<br /> [[File:BE-TS (Discontinued) Magnet Arm Configuration.png|alt=BE-TS (Discontinued) Magnet Arm Configuration|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41257014<br /> |TIE PLATE-SWING ARM<br /> |<br /> |''All units''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |41655008<br /> |EXTENSION-ARM<br /> |<br /> |''BE-36 only (Not shown)''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |43455001<br /> |EXTENSION-ARM<br /> |<br /> |''BE-42 only (Not shown)''<br /> |1<br /> |-<br /> |2<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0113<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0010<br /> |NUT-JAM-5/8-11<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |41655001<br /> |CARRIER TUBE-MAGNET SWING SHAFT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |7<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |9<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |6<br /> |-<br /> |10<br /> |41657006<br /> |SHAFT-MAGNET SWING<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |41698001<br /> |KEY-3/8&quot; X 7/16&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |N/A<br /> |STOP-MAGNET SWING<br /> |<br /> |''† Dicontinued''<br /> |1<br /> |-<br /> |13<br /> |PT0430<br /> |FLANGE BEARING-4 BOLT-1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |HW0513<br /> |BOLT-HHCS-1/2-13 X 2 1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |15<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |16<br /> |-<br /> |16<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |17<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |-<br /> |18<br /> |41655002<br /> |PLATE-MAGNET MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |41257015<br /> |BLOCK-TIGHTENER<br /> |<br /> |''2-piece item''<br /> |1<br /> |-<br /> |20<br /> |41257016<br /> |BLOCK-FIXED<br /> |<br /> |''2-piece item''<br /> |1<br /> |-<br /> |21<br /> |HW0423<br /> |BOLT-SHCS-3/8-16 X 3 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0806<br /> |SET SCREW-3/8-16 X 2&quot;<br /> |<br /> |''Replaces Swivel Head''<br /> |4<br /> |-<br /> |24<br /> |HW0424<br /> |NUT-JAM-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |25<br /> |41657017<br /> |INSULATOR-MAGNET MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |26<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |27<br /> |41657008<br /> |PAD-MAGNET SLIDE<br /> |<br /> |<br /> |2<br /> |-<br /> |28<br /> |HW0314<br /> |BOLT-FHSCS-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Refer to [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#&amp;#x5B;Current&amp;#x5D;_Magnet_Arm_Configuration_(Rotary_Actuator) &lt;nowiki&gt;[Current] Magnet Arm Configuration (Rotary Actuator)&lt;/nowiki&gt;] section for replacement / upgrade parts.''<br /> |}<br /> <br /> ==== '''&lt;big&gt;''Magnet Pivot Stop (Rotary Actuator)''&lt;/big&gt;''' ====<br /> [[File:BE-TS Magnet Pivot Stop.png|alt=BE-TS Magnet Pivot Stop|frameless|547x547px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |MAGNET PUSH/PULL ARM<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |43055010<br /> |MAGNET MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |PT0470<br /> |BEARING-MAGNET PIVOT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0525<br /> |BOLT-CARRIAGE-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |5<br /> |HW0524<br /> |BOLT-CARRIAGE-1/2-13 X 2&quot;<br /> |<br /> |''†† Stop Plate location''<br /> |4<br /> |-<br /> |6<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |7<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |16<br /> |-<br /> |8<br /> |43058009<br /> |PLATE-ROTATION STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |43058003<br /> |SLEEVE-STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43058010<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |PL0501<br /> |GROMMET-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |43057037<br /> |INSULATOR-BOTTOM<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |16<br /> |41657008<br /> |SLIDE-MAGNET<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0314<br /> |BOLT-FHSCS-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |44558001<br /> |PLATE-ROTATION STOP<br /> |<br /> |''†† Single compartment units only''<br /> |2<br /> |-<br /> |REF<br /> |43052014<br /> |ADJUSTABLE PUSH-PULL ARM<br /> |<br /> |''Includes Items 19-23''<br /> |A/R<br /> |-<br /> |19<br /> |43055018<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |20<br /> |43055019<br /> |MAGNET MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |21<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |22<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† 1-Piece Arm no longer available. Must be replaced with Adjustable Arm.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Single compartment Stop Plates require (1) additional 2&quot; long Carriage Bolt each''<br /> |}<br /> <br /> ==== &lt;big&gt;''[Current] Magnet Arm Configuration (Rotary Actuator)''&lt;/big&gt; ====<br /> [[File:BE-TS (Current) Magnet Arm Configuration.png|alt=BE-TS (Current) Magnet Arm Configuration|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |80252012<br /> |MAGNET SWING STOP KIT<br /> |<br /> |''Includes Items 1 through 6''<br /> |A/R<br /> |-<br /> |1<br /> |43057029<br /> |PLATE-STOP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43058003<br /> |SLEEVE-STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |43057030<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |PL0501<br /> |GROMMET-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0509<br /> |BOLT-HHCS-1/2-13 X 4 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |44557003<br /> |PLATE-STOP<br /> |<br /> |''† Single compartment units only''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† For units equipped with Pivot Shaft. See [Current] Magnet Arm Configuration (Rotary Actuator) for units with Independent Magnet Pivot Bearings.'' <br /> |}<br /> <br /> ==== &lt;big&gt;''Magnet Mounting Hardware (Rotary Actuator)''&lt;/big&gt; ====<br /> [[File:BE-TS Magnet Mounting Hardware (Rotary Actuator).png|alt=BE-TS Magnet Mounting Hardware (Rotary Actuator)|frameless|554x554px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43032009<br /> |MAGNET ASSEMBLY<br /> |<br /> |''Includes Items 1 through 12''<br /> |A/R<br /> |-<br /> |1<br /> |N/A<br /> |ELECTROMAGNET-95VDC<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |E0314<br /> |SENSOR-PROXIMITY-30MM<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |N/A<br /> |GASKET-REAR<br /> |<br /> |''Discontinued - Not used''<br /> |2<br /> |-<br /> |4<br /> |41657002<br /> |COVER-PROXIMITY SENSOR HOUSING<br /> |<br /> |''Rear''<br /> |2<br /> |-<br /> |5<br /> |HW1065<br /> |SCREW-SHCS-#6-32 X 3/8&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |6<br /> |HW1066<br /> |WASHER-LOCK-#6<br /> |<br /> |<br /> |8<br /> |-<br /> |7<br /> |E0376<br /> |INDICATOR LIGHT<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |8<br /> |E0335<br /> |RECEPTACLE-5 PIN MALE<br /> |<br /> |''With 12&quot; lead''<br /> |2<br /> |-<br /> |9<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |N/A<br /> |GASKET-FRONT<br /> |<br /> |''Discontinued - Not used''<br /> |2<br /> |-<br /> |11<br /> |41657003<br /> |COVER-PROXIMITY SENSOR HOUSING<br /> |80252015<br /> |''Front''<br /> |2<br /> |-<br /> |12<br /> |HW0138<br /> |SCREW-FHSCS-#8-32 X 3/8&quot;<br /> |80252015<br /> |<br /> |8<br /> |-<br /> |13<br /> |HW0433<br /> |STUD-1/2-13 X 5&quot;<br /> |80252006<br /> | rowspan=&quot;5&quot; |''For units with Magnet Pivot Shaft only.'' <br /> <br /> ''See [Discontinued] Magnet Arm Configuration for units built prior to 11/01/14''<br /> |8<br /> |-<br /> |14<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |80252006<br /> |8<br /> |-<br /> |15<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |80252006<br /> |40<br /> |-<br /> |16<br /> |HW1002<br /> |SPRING-1/2&quot;<br /> |80252006<br /> |24<br /> |-<br /> |17<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |80252006<br /> |8<br /> |-<br /> |18<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |80252014<br /> | rowspan=&quot;4&quot; |''For units with independent Pivot Bearings only.'' <br /> <br /> ''See [Current] Magnet Arm Configuration for units built 11/01/14 to present)''<br /> |4<br /> |-<br /> |19<br /> |HW1002<br /> |SPRING-1/2&quot;<br /> |80252014<br /> |4<br /> |-<br /> |20<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |80252014<br /> |8<br /> |-<br /> |21<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |80252014<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Extractors built or replacement magnets shipped prior to October 2021 used multi-piece indicator lights with replaceable bulb and lens and are no longer available. Current indicator light is a 1-piece LED assembly. Replacement of any multi-piece component requires replacing entire assembly with current, 1-piece indicator light.''<br /> |}<br /> <br /> === '''''Magnet Cords (Rotary Actuator)''''' ===<br /> [[File:BE-TS Magnet Cords.png|alt=BE-TS Magnet Cords|frameless|555x555px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1105<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |''Weather proof box''<br /> |1<br /> |-<br /> |2<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |E1106<br /> |COVER-JUNCTION BOX<br /> |<br /> |''Weather proof with gasket'' <br /> |1<br /> |-<br /> |4<br /> |E0333<br /> |RECEPTACLE-9 PIN MALE<br /> |<br /> |''With 12&quot; lead''<br /> |1<br /> |-<br /> |5<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |6<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |7<br /> |E0334<br /> |CORD-5 PIN FEMALE<br /> |<br /> |''With 36&quot; lead''<br /> |2<br /> |-<br /> |8<br /> |E0332<br /> |CORD-9 PIN FEMALE-90 DEG<br /> |<br /> |''With 36&quot; lead''<br /> |1<br /> |-<br /> |9<br /> |PL0501<br /> |GROMMET-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |41657013-2<br /> |PLATE-PANEL MOUNTING<br /> |<br /> |''With single cable hole''<br /> |1<br /> |-<br /> |11<br /> |E0334-6<br /> |CORD-5 PIN FEMALE<br /> |<br /> |''With 72&quot; lead''<br /> |2<br /> |-<br /> |12<br /> |43057038-2<br /> |PLATE-PANEL MOUNTING<br /> |<br /> |''With dual cable holes''<br /> |1<br /> |}<br /> '''''&lt;big&gt;Magnet Panel Mounting (Rotary Actuator)&lt;/big&gt;'''''<br /> <br /> [[File:BE-TS Panel Mounting (Rotary Actuator).png|alt=BE-TS Panel Mounting (Rotary Actuator)|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43057021<br /> |PLATE-STIFFENER<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |''Not shown''<br /> |24<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |5<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |12<br /> |-<br /> |6<br /> |41637001<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0325<br /> |BOLT-5/16-18 X 1 3/4&quot;-PAN HEAD<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |N/A<br /> |INSULATOR-THREADED FEMALE<br /> |<br /> |''Discontinued''<br /> |4<br /> |-<br /> |9<br /> |HW0106<br /> |WASHER-FLAT-5/16&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0326<br /> |NUT-NILN-5/16-18<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |E1016<br /> |FUSE HOLDER<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |E0325<br /> |FUSE-7AMP-250VAC<br /> |<br /> |''FLM-7 or FNM-7''<br /> |1<br /> |-<br /> |16<br /> |PL0307<br /> |INSULATOR-MALE STUD<br /> |<br /> |<br /> |4<br /> |}<br /> '''''&lt;big&gt;Magnet Extractor Electrical Panel (Rotary Actuator)&lt;/big&gt;'''''<br /> <br /> [[File:BE-TS Magnet Extractor Electrical Panel (Rotary Actuator).png|alt=BE-TS Magnet Extractor Electrical Panel (Rotary Actuator)|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41637001<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41637002<br /> |WIRE WAY<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |41637003<br /> |WIRE WAY<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |41637004<br /> |TRACK-TERMINAL BLOCK MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |41637005<br /> |TRACK-TERMINAL BLOCK MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |7<br /> |HW0132<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |<br /> |10<br /> |-<br /> |8<br /> |HW0133<br /> |NUT-NILN-#8-32<br /> |<br /> |''Not shown''<br /> |16<br /> |-<br /> |9<br /> |E1020<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |12<br /> |-<br /> |10<br /> |E1040<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |E1330<br /> |END ANCHOR<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |E1009<br /> |RECTIFIER-FULL WAVE BRIDGE<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |HW0135<br /> |SCREW-RHMS-#8-32 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |E1313<br /> |SOCKET-RELAY-8 PIN<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0139<br /> |SCREW-RHMS-#8-32 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |E0331<br /> |RELAY-DPDT-110VAC<br /> |<br /> |''with Indicator Light''<br /> |2<br /> |}<br /> <br /> === &lt;big&gt;'''&lt;u&gt;Swing Arm Stop (Rotary Actuator)&lt;/u&gt;'''&lt;/big&gt; ===<br /> [[File:BE-TS Swing Arm Stop (Rotary Actuator).png|alt=BE-TS Swing Arm Stop (Rotary Actuator)|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055007<br /> |MOUNT-STOP-SWING ARM<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |2<br /> |43057024<br /> |STOP-SWING ARM<br /> |<br /> |''BE-24''<br /> |4<br /> |-<br /> |43057023<br /> |STOP-SWING ARM<br /> |<br /> |''BE-36 &amp; BE-42''<br /> |4<br /> |-<br /> |3<br /> |HW0304<br /> |BOLT-HHCS-1/4-20 X 1 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Vacuum_Swing_Arm_Stop_(Rotary_Actuator) Vacuum Swing Arm Stop (Rotary Actuator)] section for single compartment stop mount and stop.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Extended Reach (Rotary Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Vacuum Extended Reach (Rotary Actuator).png|alt=BE-TS Vacuum Extended Reach (Rotary Actuator)|frameless|536x536px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41257014<br /> |TIE PLATE-SWING ARM<br /> |<br /> |''All units''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |41655008<br /> |EXTENSION-ARM<br /> |<br /> |''BE-36 only (Not shown)''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |43455001<br /> |EXTENSION-ARM<br /> |<br /> |''BE-42 only (Not shown)''<br /> |1<br /> |-<br /> |2<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |P0301-1<br /> |HOSE-COIL-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |41257035<br /> |STANDOFF<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW1072<br /> |RESTRAINT-HOSE<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0318<br /> |BOLT-SHCS-1/4-20 X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |HW0312<br /> |SCREW-SHSS-1/4-20 X 1&quot;-CUP POINT<br /> |<br /> |<br /> |1<br /> |}<br /> [[File:BE-TS Vacuum Extended Reach (Rotary Actuator) 2.png|alt=BE-TS Vacuum Extended Reach (Rotary Actuator)|frameless|547x547px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41255005<br /> |ARM-EXTENSION-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0416<br /> |CYLINDER-EXTENDED REACH-VACUUM<br /> |<br /> |''2 1/2&quot; X 12&quot; Cylinder''<br /> |1<br /> |-<br /> |3<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JICM X #6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |41257031<br /> |PIN-CLEVIS END<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |00197036<br /> |PIN-ROD END<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1058<br /> |PIN-HITCH<br /> |<br /> |<br /> |4<br /> |}<br /> [[File:BE-TS Vacuum Extended Reach (Rotary Actuator) 3.png|alt=BE-TS Vacuum Extended Reach (Rotary Actuator) 3|frameless|541x541px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41255004<br /> |HOUSING-EXTENDED REACH-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41257030<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |41258002<br /> |PLATE-BEARING<br /> |80258001<br /> |''Side''<br /> |2<br /> |-<br /> |8<br /> |41258005<br /> |PLATE-SHIM<br /> |80258001<br /> |''Side''<br /> |2<br /> |-<br /> |9<br /> |41258003<br /> |PLATE-BEARING<br /> |80258001<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |10<br /> |41258004<br /> |PLATE-SHIM<br /> |80258001<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |11<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |28<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |28<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Extended Reach (Rotary Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Extended Reach Rotary Actuator.png|alt=BE-TS Extended Reach Rotary Actuator|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43046001<br /> |ROTARY ACTUATOR<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |80000002<br /> |ROTARY ACTUATOR BASE ASSEMBLY<br /> |<br /> |''Without Actuator''<br /> |1<br /> |-<br /> |2A<br /> |N/A<br /> |VERTICAL CARRIER PLATE-OUTER<br /> |<br /> |''Included with 80000002''<br /> |2<br /> |-<br /> |2B<br /> |N/A<br /> |VERTICAL CARRIER PLATE-INNER<br /> |<br /> |''Included with 80000002''<br /> |1<br /> |-<br /> |2C<br /> |N/A<br /> |CARRIER BASE PLATE<br /> |<br /> |''Included with 80000002''<br /> |1<br /> |-<br /> |3<br /> |HW1070<br /> |PIN-PULL DOWEL-5/8&quot; X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0508<br /> |BOLT-SHCS-1/2-13 X 3/4&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW1045<br /> |PIN-PULL DOWEL-3/8&quot; X 1 1/2&quot;<br /> |<br /> |''Included with 80000002''<br /> |6<br /> |-<br /> |6<br /> |HW0412<br /> |BOLT-SHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |''Included with 80000002''<br /> |12<br /> |-<br /> |7<br /> |H0010<br /> |FITTING-BULKHEAD-3/4-16 X #4 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |4<br /> |}<br /> [[File:BE-TS Extended Reach Rotary Actuator 2.png|alt=BE-TS Extended Reach Rotary Actuator |frameless|535x535px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PT0634<br /> |BRACKET-MALE END<br /> |<br /> |''Sols as a set''<br /> |1<br /> |-<br /> |2<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |10<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |PT0627<br /> |HOSE CARRIER<br /> |<br /> |''14 links required''<br /> |39&quot;<br /> |-<br /> |7<br /> |PT0634<br /> |BRACKET-FEMALE END<br /> |<br /> |''Sols as a set''<br /> |1<br /> |-<br /> |8<br /> |HC0262<br /> |VALVE-CROSS PORT RELIEF<br /> |<br /> |<br /> |1<br /> |-<br /> |8a<br /> |43046003<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''† For Item 8 (Not shown)''<br /> |2<br /> |-<br /> |9<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |H1546<br /> |ADAPTER-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |H1617<br /> |ADAPTER-45 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HC0237<br /> |VALVE-SEQUENCING<br /> |<br /> |<br /> |1<br /> |-<br /> |12a<br /> |43046005<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''† For Item 12 (Not shown)''<br /> |A/R<br /> |-<br /> |13<br /> |HW0317<br /> |BOLT-HHCS-1/4-20 X 3 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |H1560<br /> |ADAPTER-45 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |H1600<br /> |ADAPTER-90 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Cartridges are for replacement only''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Extended Reach (Rotary Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Extended Reach (Rotary Actuator).png|alt=BE-TS Magnet Extended Reach (Rotary Actuator)|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055011<br /> |ARM-EXTENSION-MAGNET<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0415<br /> |CYLINDER-EXTENDED REACH-MAGNET<br /> |<br /> |''2 1/2&quot; X 8&quot; Cylinder''<br /> |1<br /> |-<br /> |3<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JICM X #6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CLEVIS END<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-ROD END<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-EXTERNAL-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW1043<br /> |CLAMP-CYLINDER<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |43057044-2<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |43058019<br /> |SUPPORT-CABLE-BAND CLAMP<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> [[File:BE-TS Magnet Extended Reach (Rotary Actuator) 2.png|alt=BE-TS Magnet Extended Reach (Rotary Actuator) |frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055012<br /> |HOUSING-EXTENDED REACH-MAGNET<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |43058013<br /> |PLATE-BEARING-SIDE<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |43058016<br /> |PLATE-SHIM-SIDE<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |43058014<br /> |PLATE-BEARING-UPPER/LOWER<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43058015<br /> |PLATE-SHIM-UPPER/LOWER<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |24<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |24<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Extended Reach End Plate&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Extended Reach End Plate.png|alt=BE-TS Extended Reach End Plate|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |CARRIER SHAFT-EXTRACTOR ARM<br /> |<br /> |''† 3-Hole version''<br /> |A/R<br /> |-<br /> |2<br /> |PT0413<br /> |COLLAR-SHAFT-3&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |50057009<br /> |PLATE-END-3 HOLE<br /> |<br /> |''Replacement part only''<br /> |4<br /> |-<br /> |4<br /> |50057010<br /> |SHIM-END PLATE<br /> |<br /> |''†† See notes''<br /> |A/R<br /> |-<br /> |5<br /> |HW1076<br /> |BOLT-FHSCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |6<br /> |43057045<br /> |CARRIER SHAFT-EXTRACTOR ARM<br /> |<br /> |''1-Hole version''<br /> |2<br /> |-<br /> |7<br /> |43017076<br /> |PLATE-END-1 HOLE<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† 3-Hole Carrier Shaft no longer available. Must replace 3-Hole shaft with current, 1-Hole version along with new ennd plates &amp; hardware.'' <br /> |-<br /> | colspan=&quot;6&quot; |''†† Shim quantity varies due to manufacturing tolerances.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Carrier Shafts &amp; Bearings&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Carrier Shafts &amp; Bearings (Helical Actuator).png|alt=BE-TS Carrier Shafts &amp; Bearings (Helical Actuator)|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43057045<br /> |CARRIER SHAFT-EXTRACTOR ARM<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |2<br /> |43054007<br /> |BEARING-EXTRACTOR ARM CARRIER<br /> |80252002<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0412<br /> |BOLT-SHCS-3/8-16 X 1 1/4&quot;<br /> |80252002<br /> |<br /> |16<br /> |-<br /> |4<br /> |PT0413<br /> |COLLAR-SHAFT-3&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |50057010<br /> |SHIM-END PLATE<br /> |<br /> |<br /> |A/R<br /> |-<br /> |6<br /> |43017076<br /> |PLATE-END-1 HOLE<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |PT0624<br /> |FITTING-ZERK<br /> |80252002<br /> |''Not shown''<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Extended_Reach_End_Plate Extended Reach End Plate] section for Extended Reach equipped units.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Drive Nut Assembly (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Drive Nut Assembly (Helical Actuator).png|alt=BE-TS Drive Nut Assembly (Helical Actuator)|frameless|600x600px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43054006<br /> |DRIVE NUT ASSEMBLY<br /> |80252003<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0426<br /> |BOLT-SHCS-3/8-16 X 5 1/2&quot;<br /> |80252003<br /> |''† See notes''<br /> |4<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |80252003<br /> |''† See notes''<br /> |4<br /> |-<br /> |4<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |80252003<br /> |''† See notes''<br /> |4<br /> |-<br /> |5<br /> |PT0624<br /> |FITTING-ZERK<br /> |80252003<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† It is recommended to replce mounting hardware when replacing Drive Nut Assembly.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Swing Arms &amp; Actuator (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;[Discontinued] Helical Actuator&lt;/big&gt;''''' ====<br /> [[File:BE-TS Swing Arms &amp; Actuator (Helical Actuator).png|alt=BE-TS [Discontinued] Swing Arms &amp; Actuator (Helical Actuator)|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |HELICAL ACTUATOR<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |43057046<br /> |ACTUATOR BASE PLATE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43058022<br /> |SPACER-ACTUATOR<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0725<br /> |BOLT-HHCS-3/4-16 X 4-3/4&quot;-GR8<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0066<br /> |NUT-JAM-3/4-16-GR8<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43055013<br /> |SWING ARM-LHS<br /> |<br /> | rowspan=&quot;6&quot; |''†† See notes''<br /> |1<br /> |-<br /> |7<br /> |HW0620<br /> |BOLT-HHCS-5/8-11 X 1-1/4&quot;<br /> |<br /> |6<br /> |-<br /> |8<br /> |HW0013<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |6<br /> |-<br /> |9<br /> |43055014<br /> |SWING ARM-RHS<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1-1/4&quot;<br /> |<br /> |6<br /> |-<br /> |11<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |6<br /> |-<br /> |12<br /> |43042008<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |43042010<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE, LONG<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |H1619<br /> |ADAPTER-90 DEG-#6 JICM X #4 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |H0010<br /> |FITTING-H-BULKHEAD-1/4 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |H1504<br /> |ADAPTER-#6 JICM X #4 NPTM<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW1082<br /> |CLAMP-HOSE<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Discontinued Helical Actuator no longer available. Must replace with current Helical Actuator Retro Kit 80252032. See [Current] Helical Actuator.'' <br /> <br /> ''†† Swing arms manufactured prior to January 2022 use 10 bolts &amp; washers per Swing Arm.'' <br /> |}<br /> <br /> ==== '''''&lt;big&gt;[Current] Helical Actuator&lt;/big&gt;''''' ====<br /> [[File:BE-TS (Current) Swing Arms &amp; Actuator (Helical Actuator).png|alt=BE-TS (Current) Swing Arms &amp; Actuator (Helical Actuator)|frameless|544x544px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |N/A<br /> |43052020<br /> |HELICAL ACTUATOR ASSEMBLY<br /> |<br /> |''Includes Items 1 through 17''<br /> |1<br /> |-<br /> |1<br /> |HC0180<br /> |HELICAL ACTUATOR<br /> |80252032<br /> |<br /> |1<br /> |-<br /> |2<br /> |43057046<br /> |ACTUATOR BASE PLATE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43058022<br /> |SPACER-ACTUATOR<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0725<br /> |BOLT-HHCS-3/4-16 X 4-3/4&quot;-GR8<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0066<br /> |NUT-JAM-3/4-16-GR8<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43055013<br /> |SWING ARM-LHS<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0620<br /> |BOLT-HHCS-5/8-11 X 1-1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |8<br /> |HW0013<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |9<br /> |43055014<br /> |SWING ARM-RHS<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1-1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |11<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |12<br /> |43042011<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE, 90 DEG<br /> |80252032<br /> |''† See notes''<br /> |1<br /> |-<br /> |13<br /> |43042012<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE, SHORT<br /> |80252032<br /> |''† See notes''<br /> |1<br /> |-<br /> |14<br /> |H1619<br /> |ADAPTER-90 DEG-#6 JICM X #4 SAEM<br /> |80252032<br /> |<br /> |2<br /> |-<br /> |15<br /> |H0010<br /> |FITTING-H-BULKHEAD-1/4 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |H1504<br /> |ADAPTER-#6 JICM X #4 NPTM<br /> |80252032<br /> |<br /> |1<br /> |-<br /> |17<br /> |H1691<br /> |ADAPTER-45 DEG-#6 JICM X #4 NPTM<br /> |80252032<br /> |''† See notes''<br /> |1<br /> |-<br /> |18<br /> |HW1082<br /> |CLAMP-HOSE<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Hard-Pipes and 45 degree adapter required if replacing discontinued actuator with current Actuator Kit Part # 80252032 required for discontinued actuator replacement.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Swing Arm Stops &amp; Tie Plate&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Swing Arm Stops &amp; Tie Plate (Helical Actuator).png|alt=BE-TS Swing Arm Stops &amp; Tie Plate (Helical Actuator)|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43057050<br /> |TIE PLATE-HELICAL SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0113<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0010<br /> |NUT-JAM-5/8-11<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |43057052<br /> |STOP-POLY-SWING ARM<br /> |<br /> |''† See notes''<br /> |4<br /> |-<br /> |6<br /> |HW0441<br /> |BOLT-FHSCS-3/8-16 X 1-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW0031<br /> |NUT-LOCK-3/8-16, DEFORMED THREAD<br /> |<br /> |''† † See notes''<br /> |4<br /> |-<br /> |8<br /> |44555002<br /> |SWING ARM STOP<br /> |<br /> |''Single compartment use only''<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Replacement Poly Stop design updated from Square to Round. Stop Spacers not required with current, Round-Style Stops.''<br /> |-<br /> | colspan=&quot;6&quot; |''† † Deformed Thread Lock Nut replaces Acorn Nut and Split Lock Washer used previously.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Push/Pull Arm Mounting (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Push-Pull Arm Mounting.png|alt=BE-TS Push-Pull Arm Mounting (Helical Actuator)|frameless|542x542px]]<br /> {| class=&quot;wikitable&quot;<br /> ! rowspan=&quot;2&quot; |ITEM<br /> ! rowspan=&quot;2&quot; |BHS PART NUMBER<br /> ! rowspan=&quot;2&quot; |DESCRIPTION<br /> ! rowspan=&quot;2&quot; |REF. KIT NO.<br /> ! rowspan=&quot;2&quot; |NOTES<br /> ! colspan=&quot;3&quot; |NO. REQ<br /> |-<br /> !BE-24<br /> !BE-36<br /> !BE-42<br /> |-<br /> | rowspan=&quot;2&quot; |1<br /> |41655008<br /> |EXTENSION-ARM<br /> |<br /> |''†BE-36 units only''<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |1<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |43455001<br /> |EXTENSION-ARM<br /> |<br /> |''†BE-42 units only''<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |1<br /> |-<br /> |2<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> | colspan=&quot;2&quot; |12<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |12<br /> | colspan=&quot;2&quot; |24<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> | colspan=&quot;2&quot; |12<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |6<br /> | colspan=&quot;2&quot; |12<br /> |-<br /> ! colspan=&quot;8&quot; |NOTES<br /> |-<br /> | colspan=&quot;8&quot; |''† BE-24 units do not utilize an Arm Extension.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Extractor Arm (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Non-Pivoting Vacuum Cup Arm (Helical Actuator)&lt;/big&gt;''''' ====<br /> [[File:BE-TS Non-Pivoting Vacuum Cup Arm (Helical Actuator).png|alt=BE-TS Non-Pivoting Vacuum Cup Arm (Helical Actuator)|frameless|578x578px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0428<br /> |STUD-VACUUM-3/8-16 X 5&quot;<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |2<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |HW-KIT-2<br /> |<br /> |40<br /> |-<br /> |3<br /> |HW1001<br /> |SPRING-3/8&quot;<br /> |HW-KIT-2<br /> |<br /> |24<br /> |-<br /> |4<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0424<br /> |NUT-JAM-3/8-16<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |6<br /> |P0402<br /> |HOSE BARB-1/4&quot; X #4 MNPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |REF<br /> |43052014<br /> |ADJUSTABLE PUSH-PULL ARM<br /> |<br /> |''Includes Items 7 through 11''<br /> |A/R<br /> |-<br /> |7<br /> |43055018<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |43055019<br /> |VACUUM CUP MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Pivoting Vacuum Cup Arm (Helical Actuator)&lt;/big&gt;''''' ====<br /> [[File:BE-TS Pivoting Vacuum Cup Arm (Helical Actuator).png|alt=BE-TS Pivoting Vacuum Cup Arm (Helical Actuator)|frameless|525x525px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43052014<br /> |ADJUSTABLE PUSH-PULL ARM<br /> |<br /> |''Includes Items 1 through 5''<br /> |A/R<br /> |-<br /> |1<br /> |43055018<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43055019<br /> |VACUUM CUP MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |43055020<br /> |MOUNT-PIVOT-VACUUM CUP<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |PT0470<br /> |BEARING-PIVOT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0525<br /> |BOLT-CARRIAGE-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |9<br /> |HW0524<br /> |BOLT-CARRIAGE-1/2-13 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |11<br /> |HW0008<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |16<br /> |-<br /> |12<br /> |43058009<br /> |PLATE-ROTATION STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |43058003<br /> |SLEEVE-STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |43058010<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |4<br /> |-<br /> |16<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |43037002-2<br /> |SUPPORT-CABLE RESTRAINT<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |21<br /> |P0506<br /> |ELBOW-STR-90 DEG-#4 NPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |22<br /> |P0402<br /> |HOSE BARB-1/4&quot; X #4 MNPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |23<br /> |43057056-2<br /> |BRACKET-HOSE SUPPORT<br /> |<br /> |<br /> |2<br /> |-<br /> |24<br /> |PL0507<br /> |GROMMET-5/8&quot; I.D.<br /> |<br /> |<br /> |2<br /> |-<br /> |25<br /> |P0302<br /> |HOSE-VACUUM-1/4&quot; I.D.<br /> |<br /> |''2 pieces at 48&quot; each''<br /> |96&quot;<br /> |-<br /> |26<br /> |HW0443<br /> |BOLT-HHCS-3/8-16 X 3-1/2&quot;<br /> |HW-KIT-3<br /> |<br /> |8<br /> |-<br /> |27<br /> |HW1001<br /> |SPRING-3/8&quot;<br /> |HW-KIT-3<br /> |<br /> |16<br /> |-<br /> |28<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |HW-KIT-3<br /> |<br /> |32<br /> |-<br /> |29<br /> |HW0424<br /> |NUT-JAM-3/8-16<br /> |HW-KIT-3<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Cup Rotation Stop (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Vacuum Cup Rotation Stop (Helical Actuator).png|alt=BE-TS Vacuum Cup Rotation Stop (Helical Actuator)|frameless|583x583px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |445558001<br /> |PLATE-ROTATION STOP<br /> |<br /> |''† Single compartment units only''<br /> |2<br /> |-<br /> |2<br /> |HW0525<br /> |BOLT-CARRIAGE-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0524<br /> |BOLT-CARRIAGE-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0008<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Components (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Vacuum Components (Helical Actuator).png|alt=BE-TS Vacuum Components (Helical Actuator)|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43058021<br /> |STIFFENER PLATE-HELICAL SWING ARM<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |24<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |5<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |12<br /> |-<br /> |6<br /> |P0005<br /> |PUMP-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |P0207<br /> |VALVE-VACUUM RELEASE<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |P0208<br /> |FILTER-HI FLOW<br /> |<br /> |<br /> |3<br /> |-<br /> |9<br /> |H0011<br /> |NIPPLE-#4 X 2&quot;-BRASS<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |P0502<br /> |TEE-#4 FNPT-BRASS<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |P0506<br /> |ELBOW-STR-90 DEG-#4 NPT-BRASS<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |P0503<br /> |NIPPLE-#4 NPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |P0402<br /> |HOSE BARB-1/4&quot; X #4 MNPT-BRASS<br /> |<br /> |<br /> |6<br /> |-<br /> |14<br /> |P0111<br /> |FILTER-VACUUM-IN-LINE<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0206<br /> |SCREW-RHMS-#10-32 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |43037014-2<br /> |BRACKET-CABLE RESTRAINT<br /> |<br /> |<br /> |1<br /> |-<br /> |17<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |18<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |21<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |22<br /> |E0624<br /> |CONNECTOR-1/2&quot;<br /> |<br /> |''Includes Lock Nut''<br /> |1<br /> |-<br /> |23<br /> |HW0212<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Arm (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Arm (Helical Actuator).png|alt=BE-TS Magnet Arm (Helical Actuator)|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43052014<br /> |ADJUSTABLE PUSH-PULL ARM<br /> |<br /> |''Includes Items 1 through 5''<br /> |A/R<br /> |-<br /> |1<br /> |43055018<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43055019<br /> |VACUUM CUP MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |43055016<br /> |MOUNT-PIVOT-MAGNET<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |PT0470<br /> |BEARING-PIVOT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0525<br /> |BOLT-CARRIAGE-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |9<br /> |HW0524<br /> |BOLT-CARRIAGE-1/2-13 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |11<br /> |HW0008<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |16<br /> |-<br /> |12<br /> |43058009<br /> |PLATE-ROTATION STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |43058003<br /> |SLEEVE-STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |43058010<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |18<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |43037002-2<br /> |SUPPORT-CABLE RESTRAINT<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |21<br /> |E0334-6'<br /> |CORD-5 PIN FEMALE<br /> |<br /> |''With 72&quot; lead''<br /> |2<br /> |-<br /> |22<br /> |E1041<br /> |WIRE LOOM-SPIRAL-3/8&quot;<br /> |<br /> |''2 pieces at 24&quot; each''<br /> |48&quot;<br /> |-<br /> |23<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |2<br /> |-<br /> |24<br /> |43057037<br /> |INSULATOR-BOTTOM<br /> |<br /> |<br /> |2<br /> |-<br /> |25<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |26<br /> |41657008<br /> |SLIDE-MAGNET<br /> |<br /> |<br /> |2<br /> |-<br /> |27<br /> |HW0314<br /> |BOLT-FHSCS-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Assembly (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Assembly (Helical Actuator).png|alt=BE-TS Magnet Assembly (Helical Actuator)|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43032009<br /> |MAGNET ASSEMBLY<br /> |<br /> |''Includes Items 1 through 12''<br /> |A/R<br /> |-<br /> |1<br /> |N/A<br /> |ELECTROMAGNET-95VDC<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |E0314<br /> |SENSOR-PROXIMITY-30MM<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |41657002<br /> |COVER-PROXIMITY SENSOR HOUSING<br /> |<br /> |''Rear''<br /> |2<br /> |-<br /> |4<br /> |HW1065<br /> |SCREW-SHCS-#6-32 X 3/8&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW1066<br /> |WASHER-LOCK-#6<br /> |<br /> |<br /> |8<br /> |-<br /> |6<br /> |E0335<br /> |RECEPTACLE-5 PIN MALE<br /> |<br /> |''With 12&quot; lead''<br /> |2<br /> |-<br /> |7<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |E0376<br /> |INDICATOR LIGHT<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |9<br /> |41657003<br /> |COVER-PROXIMITY SENSOR HOUSING<br /> |80252015<br /> |''Front''<br /> |2<br /> |-<br /> |10<br /> |HW0138<br /> |SCREW-FHSCS-#8-32 X 3/8&quot;<br /> |80252015<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |80252014<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW1002<br /> |SPRING-1/2&quot;<br /> |80252014<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |80252014<br /> |<br /> |8<br /> |-<br /> |14<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |80252014<br /> |<br /> |4<br /> |-<br /> |15<br /> |E0336<br /> |METAL OXIDE VARISTOR<br /> |<br /> |''Not shown''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Extractors built or replacement magnets shipped prior to October 2021 used Multi-Piece Indicator Lights with replaceable bulb and lens and are no longer available. Current Indicator Light is a 1-Piece LED assembly. Replacement of any Multi-Piece component requires replacing entire assembly with current, 1-Piece Indicator Light.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Components (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Components (Helical Actuator).png|alt=BE-TS Magnet Components (Helical Actuator)|frameless|534x534px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43058021<br /> |STIFFENER PLATE-HELICAL SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43057051-2<br /> |STIFFENER-MAGNET-HELICAL SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |4<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |24<br /> |-<br /> |5<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |6<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |12<br /> |-<br /> |7<br /> |PL0307<br /> |INSULATOR-MALE STUD<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0106<br /> |WASHER-FLAT-5/16&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |HW0105<br /> |WASHER-LOCK-5/16&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0004<br /> |NUT-HEX-5/16-18<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |12<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |13<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |14<br /> |E1016<br /> |FUSE HOLDER<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |E0325<br /> |FUSE-7 AMP-250VAC<br /> |<br /> |''FLM-7 or FNM-7''<br /> |1<br /> |-<br /> |16<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |17<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Panel (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Panel (Helical Actuator).png|alt=BE-TS Magnet Panel (Helical Actuator)|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41637001<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41637002<br /> |WIRE WAY-SHORT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |41637003<br /> |WIRE WAY-LONG<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |41637004<br /> |TRACK-MOUNTING-SHORT<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |41637005<br /> |TRACK-MOUNTING-LONG<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> | rowspan=&quot;3&quot; |''Mounting track hardware (Not shown)''<br /> |10<br /> |-<br /> |7<br /> |HW0132<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |10<br /> |-<br /> |8<br /> |HW0133<br /> |NUT-NILN-#8-32<br /> |<br /> |16<br /> |-<br /> |9<br /> |E1020<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |12<br /> |-<br /> |10<br /> |E1040<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |E1330<br /> |END ANCHOR<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |E1009<br /> |RECTIFIER-FULL WAVE BRIDGE<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |HW0135<br /> |SCREW-RHMS-#8-32 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |E1313<br /> |SOCKET-RELAY-8 PIN<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |E0331<br /> |RELAY-DPDT-110VAC<br /> |<br /> |''With Indicator Light''<br /> |2<br /> |-<br /> |16<br /> |HW0139<br /> |SCREW-RHMS-#8-32 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Extended Reach Hydraulics (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== &lt;big&gt;''[Discontinued] Helical Actuator''&lt;/big&gt; ====<br /> [[File:BE-TS (Discontinued) Helical Actuator.png|alt=BE-TS (Discontinued) Helical Actuator|frameless|546x546px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43042009<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |H0010<br /> |FITTING-BULKHEAD-3/4-16 X #4 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |43055017<br /> |ELBOW-BULKHEAD<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> | rowspan=&quot;3&quot; |7<br /> |4-48-0402-0402<br /> |HYD HOSE-1/4&quot; X 48&quot; (BE-24 UNITS)<br /> |<br /> | rowspan=&quot;3&quot; |''Cylinder rod-end hose''<br /> | rowspan=&quot;3&quot; |1<br /> |-<br /> |4-54-0402-0402<br /> |HYD HOSE-1/4&quot; X 54&quot; (BE-36 UNITS)<br /> |<br /> |-<br /> |4-56-0402-0402<br /> |HYD HOSE-1/4&quot; X 56&quot; (BE-42 UNITS)<br /> |<br /> |-<br /> | rowspan=&quot;3&quot; |8<br /> |4-38-0402-0402<br /> |HYD HOSE-1/4&quot; X 38&quot; (BE-24 UNITS)<br /> |<br /> | rowspan=&quot;3&quot; |''Cylinder rod-end hose''<br /> | rowspan=&quot;3&quot; |1<br /> |-<br /> |4-44-0402-0402<br /> |HYD HOSE-1/4&quot; X 44&quot; (BE-36 UNITS)<br /> |<br /> |-<br /> |4-46-0402-0402<br /> |HYD HOSE-1/4&quot; X 46&quot; (BE-42 UNITS)<br /> |<br /> |-<br /> |9<br /> |41257035<br /> |STANDOFF-HOSE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW1093<br /> |CLAMP-CABLE-3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0311<br /> |BOLT-FHSCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> ==== &lt;big&gt;''[Current] Helical Actuator''&lt;/big&gt; ====<br /> [[File:BE-TS (Current) Helical Actuator.png|alt=BE-TS (Current) Helical Actuator|frameless|567x567px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43042013<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |H0010<br /> |FITTING-BULKHEAD-3/4-16 X #4 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |43055021<br /> |ELBOW-BULKHEAD<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> | rowspan=&quot;3&quot; |7<br /> |4-48-0402-0402<br /> |HYD HOSE-1/4&quot; X 48&quot; (BE-24 UNITS)<br /> |<br /> | rowspan=&quot;3&quot; |''Cylinder rod-end hose''<br /> | rowspan=&quot;3&quot; |1<br /> |-<br /> |4-54-0402-0402<br /> |HYD HOSE-1/4&quot; X 54&quot; (BE-36 UNITS)<br /> |<br /> |-<br /> |4-56-0402-0402<br /> |HYD HOSE-1/4&quot; X 56&quot; (BE-42 UNITS)<br /> |<br /> |-<br /> | rowspan=&quot;3&quot; |8<br /> |4-38-0402-0402<br /> |HYD HOSE-1/4&quot; X 38&quot; (BE-24 UNITS)<br /> |<br /> | rowspan=&quot;3&quot; |''Cylinder rod-end hose''<br /> | rowspan=&quot;3&quot; |1<br /> |-<br /> |4-44-0402-0402<br /> |HYD HOSE-1/4&quot; X 44&quot; (BE-36 UNITS)<br /> |<br /> |-<br /> |4-46-0402-0402<br /> |HYD HOSE-1/4&quot; X 46&quot; (BE-42 UNITS)<br /> |<br /> |-<br /> |9<br /> |41257035<br /> |STANDOFF-HOSE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW1093<br /> |CLAMP-CABLE-3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0311<br /> |BOLT-FHSCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Extended Reach (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== &lt;big&gt;'''''Non-Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator)'''''&lt;/big&gt; ====<br /> [[File:BE-TS Non-Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator).png|alt=BE-TS Non-Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator)|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41255005<br /> |ARM-EXTENSION<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41255004<br /> |HOUSING-EXTENDED REACH<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0416<br /> |CYLINDER-2 1/2&quot; X 12&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CYLINDER-REAR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-CYLINDER-ROD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JIC X # 6 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |28<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |28<br /> |-<br /> |15<br /> |41258002<br /> |PLATE-BEARING<br /> |80258001<br /> |''Side''<br /> |2<br /> |-<br /> |16<br /> |41258005<br /> |PLATE-SHIM<br /> |80258001<br /> |''Side''<br /> |2<br /> |-<br /> |17<br /> |41258003<br /> |PLATE-BEARING<br /> |80258001<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |18<br /> |41258004<br /> |PLATE-SHIM<br /> |80258001<br /> |''Upper / lower''<br /> |2<br /> |}<br /> &lt;big&gt;'''''Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator)'''''&lt;/big&gt;<br /> <br /> [[File:BE-TS Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator).png|alt=BE-TS Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator)|frameless|553x553px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055011<br /> |ARM-EXTENSION<br /> |<br /> |''Pivoting cup only''<br /> |1<br /> |-<br /> |2<br /> |43055012<br /> |HOUSING-EXTENDED REACH<br /> |<br /> |''Pivoting cup only''<br /> |1<br /> |-<br /> |3<br /> |HC0415<br /> |CYLINDER-2 1/2&quot; X 8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CYLINDER-REAR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-CYLINDER-ROD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JIC X # 6 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |24<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |24<br /> |-<br /> |15<br /> |43058013<br /> |PLATE-BEARING<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |16<br /> |43058016<br /> |PLATE-SHIM<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |17<br /> |43058014<br /> |PLATE-BEARING<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |18<br /> |43058015<br /> |PLATE-SHIM<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |19<br /> |HW1043<br /> |CLAMP-CYLINDER<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |43058019<br /> |SUPPORT-CABLE-BAND CLAMP<br /> |<br /> |<br /> |2<br /> |-<br /> |21<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |22<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |23<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |24<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Extended Reach (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== &lt;big&gt;'''''[Discontinued] Extended Reach Magnet Arm (Helical Actuator)'''''&lt;/big&gt; ====<br /> [[File:BE-TS (Discontinued) Extended Reach Magnet Arm (Helical Actuator).png|alt=BE-TS (Discontinued) Extended Reach Magnet Arm (Helical Actuator)|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055011<br /> |ARM-EXTENSION<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43055012<br /> |HOUSING-EXTENDED REACH<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0415<br /> |CYLINDER-2 1/2&quot; X 8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CYLINDER-REAR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-CYLINDER-ROD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JIC X # 6 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |24<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |24<br /> |-<br /> |15<br /> |43058013<br /> |PLATE-BEARING<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |16<br /> |43058016<br /> |PLATE-SHIM<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |17<br /> |43058014<br /> |PLATE-BEARING<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |18<br /> |43058015<br /> |PLATE-SHIM<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |19<br /> |HW1043<br /> |CLAMP-CYLINDER<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |43058019<br /> |SUPPORT-CABLE-BAND CLAMP<br /> |<br /> |<br /> |2<br /> |-<br /> |21<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |24<br /> |43057004-2<br /> |SUPPORT-CABLE-MAGNET<br /> |<br /> |<br /> |2<br /> |}<br /> &lt;big&gt;'''''[Current] Extended Reach Magnet Arm (Helical Actuator)'''''&lt;/big&gt;<br /> <br /> [[File:BE-TS (Current) Extended Reach Magnet Arm (Helical Actuator).png|alt=BE-TS (Current) Extended Reach Magnet Arm (Helical Actuator)|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |50055004<br /> |ARM-EXTENSION<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |50055005<br /> |HOUSING-EXTENDED REACH<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0415<br /> |CYLINDER-2 1/2&quot; X 8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CYLINDER-REAR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-CYLINDER-ROD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JIC X # 6 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |20<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |20<br /> |-<br /> |15<br /> |50058009<br /> |PLATE-BEARING<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |16<br /> |50058012<br /> |PLATE-SHIM<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |17<br /> |50058010<br /> |PLATE-BEARING<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |18<br /> |50058011<br /> |PLATE-SHIM<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |19<br /> |HW1043<br /> |CLAMP-CYLINDER<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |43058019<br /> |SUPPORT-CABLE-BAND CLAMP<br /> |<br /> |<br /> |2<br /> |-<br /> |21<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |24<br /> |43057004-2<br /> |SUPPORT-CABLE-MAGNET<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> == &lt;big&gt;Drive and Idler Wheels&lt;/big&gt; ==<br /> <br /> === &lt;big&gt;&lt;u&gt;Drive Wheel Mounting&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Drive Wheel Mounting.png|alt=BE-TS Drive Wheel Mounting|frameless|519x519px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0503<br /> |BOLT-HHCS-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |2<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |''Cylinder Bracket bolt only''<br /> |2<br /> |-<br /> |3<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> === &lt;big&gt;&lt;u&gt;Drive Wheel Motors&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Drive Wheel Motors.png|alt=BE-TS Drive Wheel Motors|frameless|535x535px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;2&quot; |1<br /> |43822001-6B<br /> |FLOOR DRIVE ASSEMBLY (W/ 200CC MOTOR)<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |43822004-6B<br /> |FLOOR DRIVE ASSEMBLY (W/ 400CC MOTOR)<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |2<br /> |43827004<br /> |PLATE-MOTOR MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0416<br /> |BOLT-SHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |H1612<br /> |ADAPTER-90 DEG-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |N/A<br /> |ROD-THREADED-1/2-13 X 7 3/4&quot;<br /> |<br /> |''†† See notes''<br /> |8<br /> |-<br /> |7<br /> |N/A<br /> |SPACER-DRIVE WHEEL-4.75&quot; LG<br /> |<br /> |''†† See notes''<br /> |8<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |43827006<br /> |SPACER-DRIVE WHEEL-4.125&quot; LG<br /> |<br /> |Must be ordered as a set of 4<br /> |8<br /> |-<br /> |11<br /> |HW0516<br /> |BOLT-HHCS-1/2-13 X 6 1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |12<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> | rowspan=&quot;2&quot; |13<br /> |N/A<br /> |MOTOR-HYDRAULIC-200CC<br /> |<br /> |''††† Keyed Shaft''<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |N/A<br /> |MOTOR-HYDRAULIC-400CC<br /> |<br /> |''††† Keyed Shaft''<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |14<br /> |HW1071<br /> |KEY-WOODRUFF-#808 STD<br /> |<br /> |<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |15<br /> |HC0124-6B<br /> |MOTOR-HYDRAULIC-200CC<br /> |<br /> |''† Spline Shaft''<br /> |2<br /> |-<br /> |HC0126-6B<br /> |MOTOR-HYDRAULIC-400CC<br /> |80322003<br /> |''† Spline Shaft''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† 200CC Motors required for units equipped with Parallel Drive Circuit.''<br /> ''400CC Motors required for units equipped with Series Drive Circuit.''<br /> <br /> ''See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Cross_Port_Relief Cross Port Relief] section to determine if unit is Parallel or Series equipped and approximate effectivity of each type.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Parts obsolete and no longer available. Must replace with Items 10 &amp; 11.''<br /> |-<br /> | colspan=&quot;6&quot; |''††† Parts obsolete and no longer available. Must replace with Spline Drive Conversion Kit.''<br /> |-<br /> | colspan=&quot;6&quot; |'''''NOTE:''' Effectivity dates refer to dates new extractor units are shipped from the factory. Replacement part effectivity &lt;u&gt;may&lt;/u&gt; differ due to factory inventory levels at time of parts order. Consult factory if unsure of parts needed.''<br /> |}<br /> <br /> === &lt;big&gt;&lt;u&gt;Drive Wheel Bearings&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Drive Wheel Bearings.png|alt=BE-TS Drive Wheel Bearings|frameless|537x537px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43825001<br /> |FRAME-FLOOR DRIVE<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |C0510-1<br /> |WHEEL-10&quot; X 5&quot;-POLY<br /> |80322001<br /> |<br /> |2<br /> |-<br /> |3<br /> |43822003<br /> |SHAFT-WHEEL (W/ COUPLING BODY)<br /> |<br /> |''Available in multiple kits''<br /> |2<br /> |-<br /> |4<br /> |43897004<br /> |KEY-3/8&quot; X 4 3/4&quot;<br /> |80322001<br /> |<br /> |2<br /> |-<br /> |5<br /> |PT0430<br /> |FLANGE BEARING-4 BOLT-1 1/2&quot;<br /> |80322001<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |7<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |16<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |9<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |16<br /> |-<br /> |10<br /> |PT0321<br /> |CHAIN-COUPLING-#50<br /> |<br /> |''Includes connecting pin''<br /> |2<br /> |-<br /> |11<br /> |N/A<br /> |COUPLING BODY-TAPER BORE-#50<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |12<br /> |N/A<br /> |BUSHING-TAPER LOCK-1&quot;<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |13<br /> |HW0323<br /> |BOLT-HHCS-5/16-18 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |14<br /> |PT0330<br /> |COUPLING BODY-#50-SPLINE BORE<br /> |80322003<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW1110<br /> |RETAINING RING-1 1/2&quot;-HEAVY DUTY<br /> |<br /> |''†† Available in multiple kits''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Parts obsolete and no longer available. Spline Drive Conversion Kit required. Reuse of bushing after disassembly not recommended.'' <br /> |-<br /> | colspan=&quot;6&quot; |''† † Retaining Rings used on units shipped after 7/01/12. Units shipped from 7/01/13 are equipped with (2) Retaining Rings per shaft - (1) on each side of the wheel. Units shipped after 11/01/13 are equipped with only (1) Snap Rings as shown. Second Snap Ring is no longer used or required.''<br /> |-<br /> | colspan=&quot;6&quot; |''NOTE: Effectivity dates refer to dates new extractor units are shipped from the factory. Replacement part effectivity &lt;u&gt;'''may'''&lt;/u&gt; differ due to factory inventory levels at time of parts order. Consult factory if unsure of parts needed.''<br /> |}<br /> <br /> === &lt;big&gt;&lt;u&gt;Drive Wheel Assembly&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Drive Wheel Assembly.png|alt=BE-TS Drive Wheel Assembly|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43822005<br /> |RADIAL PISTON DRIVE WHEEL ASSEMBLY<br /> |<br /> |''Includes Items 1 through 6''<br /> |2<br /> |-<br /> |1<br /> |43825003<br /> |RADIAL PISTON DRIVE WHEEL MOUNT<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0160-1<br /> |400CC RADIAL PISTON MOTOR<br /> |<br /> |''Includes nuts &amp; studs''<br /> |1<br /> |-<br /> |REF<br /> |HC0160-STUD<br /> |STUD-M14-1.5 X 46MM<br /> |<br /> |''Replacement motor stud''<br /> |A/R<br /> |-<br /> |REF<br /> |HC0160-NUT<br /> |NUT-FLANGED HEX-M14-1.5<br /> |<br /> |''Replacement motor nut''<br /> |A/R<br /> |-<br /> |3<br /> |C0511<br /> |WHEEL-POLY-10 X 5&quot;-FLANGE MOUNT<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |5<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |6<br /> |-<br /> |7<br /> |H1612<br /> |ADAPTER-H-90 DEG-#10 SAEM X #8 JICM<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |H1539<br /> |ADAPTER-#8 JIC X #6 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1586<br /> |ADAPTER-90 DEG-#8 JICSW X #6 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |H0801<br /> |TEE-H-#6 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H1501<br /> |ADAPTER-#8 JIC X #6 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |H0200<br /> |REDUCER-#6 NPT X #4 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |H0206<br /> |PLUG-#4 NPT<br /> |<br /> |''† Left Drive Wheel only''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Plug used on Left Drive Wheel Assembly only. Hose from Left Drive Wheel Assembly is connected to tee on Right Drive Wheel Assembly.'' <br /> |}<br /> <br /> === &lt;big&gt;&lt;u&gt;Idler Casters&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Idler Casters.png|alt=BE-TS Idler Casters|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |C0500-1<br /> |CASTER-RIGID-10&quot; X 5&quot;-POLY<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |3<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |<br /> |''For Cylinder Bracket position'' <br /> |2<br /> |-<br /> |4<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |16<br /> |-<br /> |5<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |6<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> == &lt;big&gt;Electrical&lt;/big&gt; ==<br /> <br /> === &lt;u&gt;&lt;big&gt;AC Power Stanchion&lt;/big&gt;&lt;/u&gt; ===<br /> <br /> ==== &lt;big&gt;''Aero-Motive Energy Rail''&lt;/big&gt; ====<br /> [[File:BE-TS Aero-Motive Energy Rail.png|alt=BE-TS Aero-Motive Energy Rail|frameless|536x536px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43835001<br /> |STANCHION-POWER<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0511<br /> |BOLT-HHCS-1/2-13 X 3 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |46837014-2<br /> |TOW ARM-COLLECTOR TROLLEY<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |46838015<br /> |SPACER BLOCK-TOW ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW1030<br /> |U-BOLT-3/8-16 X 2&quot; X 5&quot;-SQUARE BEND<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .625&quot; to .750&quot;''<br /> |1<br /> |-<br /> |13<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |HW1051<br /> |EYE BOLT-3/8-16 X 5 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0126<br /> |WASHER-FLAT-3/8&quot;-FENDER<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |BD0010<br /> |TROLLEY-ENERGY RAIL<br /> |<br /> | rowspan=&quot;2&quot; |''Aero-Motive Rail only''<br /> <br /> ''(orange housing color)''<br /> |1<br /> |-<br /> |19<br /> |BD0100<br /> |BRUSH-TROLLEY<br /> |<br /> |4<br /> |}<br /> <br /> ==== '''&lt;big&gt;''Vahle Energy Rail''&lt;/big&gt;''' ====<br /> [[File:BE-TS Vahle Energy Rail.png|alt=BE-TS Vahle Energy Rail|frameless|535x535px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1A<br /> |BD0031<br /> |TROLLEY-ENERGY RAIL, KSL<br /> |<br /> | rowspan=&quot;3&quot; |''† Vahle KSL Rail only''<br /> <br /> ''(green housing color)''<br /> |1<br /> |-<br /> |2A<br /> |BD0040<br /> |BRUSH-PHASE, KSL<br /> |<br /> |3<br /> |-<br /> |3A<br /> |BD0041<br /> |BRUSH-GROUND, KSL<br /> |<br /> |1<br /> |-<br /> |1B<br /> |BD0231<br /> |TROLLEY-ENERGY RAIL, KBH<br /> |<br /> | rowspan=&quot;3&quot; |''† Vahle KBH Rail only''<br /> <br /> ''(gray housing color)''<br /> <br /> ''(Nots shown)''<br /> |1<br /> |-<br /> |2B<br /> |BD0240<br /> |BRUSH-PHASE, KBH<br /> |<br /> |3<br /> |-<br /> |3B<br /> |BD0241<br /> |BRUSH-GROUND, KBH<br /> |<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |4<br /> |BD0030<br /> |TOW ARM-COLLECTOR TROLLEY, KSL<br /> |<br /> |''† Vahle KSL Rail only''<br /> <br /> ''(green housing color)''<br /> |1<br /> |-<br /> |BD0230<br /> |TOW ARM-COLLECTOR TROLLEY, KBH<br /> |<br /> |''† Vahle KBH Rail only''<br /> <br /> ''(gray housing color)''<br /> |1<br /> |-<br /> |5<br /> |46838015<br /> |SPACER-BLOCK-TOW ARM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |6<br /> |41237083-2<br /> |BRACKET-TOW ARM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |7<br /> |HW1054<br /> |U-BOLT-5/16-18 X 2&quot; X 5&quot;-SQUARE BEND<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW0323<br /> |BOLT-HHCS-5/16-18 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0106<br /> |WASHER-FLAT-5/16&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0150<br /> |WASHER-FLAT-5/16&quot;-FENDER<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0105<br /> |WASHER-LOCK-5/16&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0004<br /> |NUT-HEX-5/16-18<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Verify Energy Rail type (KSL OR KBH) by the color of the energy rail housing.'' <br /> |-<br /> | colspan=&quot;6&quot; |''†† Not all units equipped with Tow Arm Bracket. Location of Spacer Block and/or Tow Arm Bracket may vary from configuration shown.'' <br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Control Panel&lt;/big&gt;&lt;/u&gt;''' ===<br /> '''&lt;big&gt;''[Discontinued] Control Panel for Units with 10 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS (Discontinued) Control Panel for Units with 10HP.png|alt=BE-TS (Discontinued) Control Panel for Units with 10HP|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-CONTROL PANEL-16&quot; X 14&quot; X 6&quot;<br /> |<br /> |CONSULT FACTORY<br /> |1<br /> |-<br /> |2<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |Grip size .250&quot; to.375&quot;<br /> |1<br /> |-<br /> |6<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |Grip size .625&quot; to .750&quot;<br /> |2<br /> |-<br /> |7<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |Grip size .500&quot; to .625&quot;<br /> |2<br /> |-<br /> |8<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |''Not shown''<br /> |1<br /> |-<br /> |9<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |''Not shown''<br /> |4<br /> |}<br /> [[File:BE-TS (Discontinued) Control Panel for Units with 10HP Detail.png|alt=BE-TS (Discontinued) Control Panel for Units with 10HP Detail|frameless|556x556px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0640<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |BLANK PANEL WITHOUT HOLES<br /> |1<br /> |-<br /> |2<br /> |E0120<br /> |MAGNETIC STARTER-NEMA 1 3/4&quot;<br /> |<br /> |WITH OVERLOAD<br /> |1<br /> |-<br /> |3<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |<br /> |17<br /> |-<br /> |4<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |<br /> |17<br /> |-<br /> |5<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |17<br /> |-<br /> |6<br /> |E0207-1<br /> |TRANSFORMER<br /> |<br /> |480VAC TO 120VAC, 0.75 Kva<br /> |1<br /> |-<br /> |7<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |HW0003<br /> |NUT-NILN-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |E1023<br /> |WIREWAY<br /> |<br /> |SOLD BY LENGTH<br /> |A/R<br /> |-<br /> |11<br /> |E1024<br /> |MOUNTING TRACK<br /> |<br /> |SOLD BY LENGTH<br /> |A/R<br /> |-<br /> |12<br /> |E1020<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |16<br /> |-<br /> |13<br /> |E1040<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |E1330<br /> |END ANCHOR<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |E0341<br /> |GROUND LUG<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |E0902<br /> |FUSE-6A<br /> |<br /> |FLM-6<br /> |1<br /> |}<br /> <br /> ==== '''&lt;big&gt;''[Current] Control Panel for Units with 20 HP Power Unit''&lt;/big&gt;''' ====<br /> [[File:BE-TS (Current) Control Panel for Units with 20HP.png|alt=BE-TS (Current) Control Panel for Units with 20HP|frameless|601x601px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-24&quot; X 16&quot; X 6&quot;<br /> |<br /> |CONSULT FACTORY<br /> |1<br /> |-<br /> |2<br /> |E0123-1<br /> |HANDLE-DISCONNECT<br /> |<br /> |INCL. MOUNTING SCREWS<br /> |1<br /> |-<br /> |3<br /> |E0662<br /> |RESTRAINT-3/4&quot;-LIQUID TIGHT<br /> |<br /> |INCL. LOCKNUT<br /> |1<br /> |-<br /> |4<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |GRIP SIZE .500&quot; TO .625&quot;<br /> |2<br /> |-<br /> |5<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |GRIP SIZE .625&quot; TO .750&quot;<br /> |1<br /> |-<br /> |6<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |7<br /> |E0661<br /> |RESTRAINT-3/4&quot;-90 DEG-LIQUID TIGHT<br /> |<br /> |INCL. LOCKNUT<br /> |1<br /> |-<br /> |8<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |GRIP SIZE .250&quot; TO .375&quot;<br /> |1<br /> |-<br /> |9<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |GRIP SIZE .450&quot; TO .560&quot;<br /> |2<br /> |-<br /> |10<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |11<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |}<br /> [[File:BE-TS (Current) Control Panel for Units with 20HP Details.png|alt=BE-TS (Current) Control Panel for Units with 20HP Details|frameless|645x645px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |YE0506<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |''Blank panel without holes''<br /> |1<br /> |-<br /> |2<br /> |YE0205-1<br /> |SWITCH-DISCONNECT-80A<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43036007<br /> |SHAFT-DISCONNECT<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |YE0409<br /> |FUSE HOLDER-SINGLE POLE<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |E0914<br /> |FUSE-10A<br /> |<br /> |''FLM-10''<br /> |1<br /> |-<br /> |6<br /> |E0902<br /> |FUSE-6A<br /> |<br /> |''FLM-6''<br /> |1<br /> |-<br /> |7<br /> |E0903<br /> |FUSE-12A<br /> |<br /> |''FLM-12''<br /> |1<br /> |-<br /> |8<br /> |YE0402<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |17<br /> |-<br /> |9<br /> |YE0405<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |YE0406<br /> |END ANCHOR<br /> |<br /> |<br /> |6<br /> |-<br /> |11<br /> |E0136<br /> |FUSE HOLDER-3 POLE<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |YE0901<br /> |FUSE-40A<br /> |<br /> |JTD-40-ID<br /> |3<br /> |-<br /> |13<br /> |E1013<br /> |BASE-RELAY<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |E1012<br /> |RELAY-11 PIN<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |E0137<br /> |FUSE HOLDER-2 POLE<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |YE0902<br /> |FUSE-10A<br /> |<br /> |''KLDR-10''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |17<br /> |N/A<br /> |CONTACTOR, &quot;A40&quot; SERIES<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |E0132-1<br /> |CONTACTOR, &quot;AF38&quot; SERIES<br /> |80332009<br /> |<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |18<br /> |N/A<br /> |OVERLOAD, &quot;TA&quot; SERIES<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |E0131-1<br /> |OVERLOAD, &quot;TF&quot; SERIES<br /> |80332009<br /> |<br /> |1<br /> |-<br /> |19<br /> |E1023<br /> |WIREWAY<br /> |<br /> |''Sold by length''<br /> |A/R<br /> |-<br /> |20<br /> |E0908<br /> |MOUNTING RAIL<br /> |<br /> |''Sold by length''<br /> |A/R<br /> |-<br /> |21<br /> |E1070<br /> |GROUND BAR-4 POSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |22<br /> |E1071<br /> |GROUND BAR-7 POSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |23<br /> |HW1061<br /> |SCREW-RHMS-#8-32 X 1&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |24<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> | rowspan=&quot;3&quot; |''Track and Wireway mounting hardware (Not shown)''<br /> |14<br /> |-<br /> |25<br /> |HW0133<br /> |WASHER-FLAT-#8<br /> |<br /> |14<br /> |-<br /> |26<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |17<br /> |-<br /> |27<br /> |E0139<br /> |AUXILIARY CONTACT BLOCK<br /> |80332009<br /> |''†† See notes''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† &quot;A40&quot; Series Contactor and &quot;TA&quot; Series Overload no longer available as of mid-March 2022. Components must be replaced with current Overload &amp; Relay Kit 80332009.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Auxiliary contact Block required for units equipped with &quot;AF38&quot; Series Contactor &amp; &quot;TF&quot; Series Overload.''<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Transformer&lt;/big&gt;&lt;/u&gt;''' ===<br /> '''&lt;big&gt;''Transformer for Units with 20 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS Transformer for Units with 20HP.png|alt=BE-TS Transformer for Units with 20HP|frameless|554x554px]]<br /> <br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0220<br /> |TRANSFORMER<br /> |<br /> |''480VAC to 120VAC, 3kVA''<br /> |1<br /> |-<br /> |2<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |3<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |7<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |3<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;Operator Console&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Operator Console Electrical.png|alt=BE-TS Operator Console Electrical|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0327<br /> |KEYED ACTUATOR ASSEMBLY<br /> |<br /> |''Includes 2 Keys &amp; Contact Block'' <br /> |1<br /> |-<br /> |2<br /> |E0351<br /> |KEY-REPLACEMENT<br /> |<br /> |''Set of 2 Keys''<br /> |A/R<br /> |-<br /> |3<br /> |E0309-1<br /> |HOUR METER<br /> |<br /> |''† Includes mounting hardware''<br /> |1<br /> |-<br /> |4<br /> |N/A<br /> |SWITCH-SELECTOR-3 POSITION<br /> |<br /> |''ON-OFF-ON, †† See notes''<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |5<br /> |N/A<br /> |LEGEND PLATE-VACUUM<br /> |<br /> |''††† See notes''<br /> |1<br /> |-<br /> |N/A<br /> |LEGEND PLATE-MAGNET<br /> |<br /> |''††† See notes''<br /> |1<br /> |-<br /> |6<br /> |N/A<br /> |CONTACT BLOCK-N/O<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |7<br /> |N/A<br /> |CONTACT BLOCK-N/C<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |8<br /> |E1083<br /> |SWITCH-SELECTOR-3 POSITION<br /> |80232001<br /> |''OFF-ON-OFF''<br /> |1<br /> |-<br /> |9<br /> |E1080<br /> |CONTACT BLOCK-N/O &amp; N/C<br /> |80232001<br /> |<br /> |2<br /> |-<br /> |10<br /> |YE0311<br /> |SWITCH-EMERGENCY STOP<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |YE0407<br /> |LEGEND PLATE-EMERGENCY STOP<br /> |<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Current Hour Meter is 3-Bolt version. Replacement of 4-Bolt version will require new mounting holes to be drilled in dashboard.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Parts no longer available. Must order new Selector Switch Kit 80232001''<br /> |-<br /> | colspan=&quot;6&quot; |''††† Parts no longer available. See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Labels_&amp;_Placards Labels &amp; Placards] section for current Placards''<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;Foot Switch&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Foot Switch Electrical.png|alt=BE-TS Foot Switch Electrical|frameless|701x701px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0301-1<br /> |SWITCH-FOOT OPERATED<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .500&quot; to .625&quot;''<br /> |1<br /> |-<br /> |3<br /> |E0515<br /> |CORD-14-3-SO/SOW<br /> |<br /> |<br /> |9'<br /> |-<br /> |4<br /> |HC0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |''If equipped''<br /> |2<br /> |-<br /> |5<br /> |HC0103<br /> |WASHER-1/4&quot;-LOCK<br /> |<br /> |''If equipped''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Open-Style Switch is a direct replacement for discontinued, Covered-Style Switch.'' <br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''Gate Switch'''&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Gate Switch Electrical.png|alt=BE-TS Gate Switch Electrical|frameless|613x613px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0312<br /> |SWITCH-PUSH BUTTON<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43017041<br /> |MOUNT-GATE SWITCH<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW1077<br /> |SCREW-RHMS-#10-24 X 5/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0307<br /> |BOLT-SHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |PL0502<br /> |GROMMET-3/8&quot; I.D.<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |YE0305<br /> |SWITCH-ROLLER<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |SS0303<br /> |WASHER-FLAT-#8<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |SS0111<br /> |SCREW-SHCS-#8-32 X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |SS0203<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''Proximity Switch'''&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Proximity Switch Electrical.png|alt=BE-TS Proximity Switch Electrical|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0314<br /> |SENSOR-PROXIMITY-30MM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43017027-2<br /> |BRACKET-PROXIMITY SENSOR<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |6<br /> |43017037-2<br /> |ANGLE-PROXIMITY SENSOR TARGET<br /> |<br /> |''Rotary Actuator units'' <br /> |1<br /> |-<br /> |43017084-2<br /> |ANGLE-PROXIMITY SENSOR TARGET<br /> |<br /> |''Helical Actuator units'' <br /> |1<br /> |-<br /> |7<br /> |HW0341<br /> |BOLT-FHSCS-1/4-20 X 5/8&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''120V Receptacle'''&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS 120V-Receptacle.png|alt=BE-TS 120V Receptacle|frameless|544x544px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |3<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0650<br /> |RECEPTACLE-DUPLEX<br /> |<br /> |''† 20A''<br /> |1<br /> |-<br /> |5<br /> |E0651<br /> |COVER-RECEPTACLE-DUPLEX<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0655<br /> |RECEPTACLE-GFCI<br /> |<br /> |''20A''<br /> |1<br /> |-<br /> |7<br /> |E0656<br /> |COVER-RECEPTACLE-GFCI<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |E0654<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |E0657<br /> |COVER-RECEPTACLE-DUPLEX/GFCI<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |''Mounting hardware (Not shown)''<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† If Duplex Receptacle has Split Feed (1 set of black &amp; white wires for each plug), the Break-Off Fin must be removed prior to installation.'' <br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''Console Enclosure'''&lt;/big&gt;&lt;/u&gt; ===<br /> <br /> ==== '''&lt;big&gt;''[Discontinued] Operator Console Enclosure for Units with 10 HP Power Unit''&lt;/big&gt;''' ====<br /> [[File:BE-TS (Discontinued) Operator Console Enclosure for Units with 10 HP Power Unit.png|alt=BE-TS (Discontinued) Operator Console Enclosure for Units with 10 HP Power Unit|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-6&quot; X 6&quot; X 4 &quot;<br /> |<br /> |''Consult factory''<br /> |1<br /> |-<br /> |2<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |3<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |4<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |5<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |8<br /> |43817087-2<br /> |BRACKET-MOUNTING-ENCLOSURE<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> | rowspan=&quot;4&quot; |''Mounting bracket hardware (Not shown)''<br /> |2<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |2<br /> |}<br /> '''&lt;big&gt;''[Discontinued] Operator Console Enclosure Panel for Units with 10 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS (Discontinued) Operator Console Enclosure Panel for Units with 10 HP Power Unit.png|alt=BE-TS (Discontinued) Operator Console Enclosure Panel for Units with 10 HP Power Unit|frameless|566x566px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0639<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |''Without holes''<br /> |1<br /> |-<br /> |2<br /> |E1024<br /> |TRACK-TERMINAL BLOCK<br /> |<br /> |''4 7/8&quot; LG''<br /> |1<br /> |-<br /> |3<br /> |E1020<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |9<br /> |-<br /> |4<br /> |E1330<br /> |END ANCHOR<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |E1040<br /> |END BARRIER<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0341<br /> |GROUND LUG<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |''2 for track mounting''<br /> |3<br /> |-<br /> |8<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |''2 for track mounting''<br /> |3<br /> |-<br /> |9<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |''2 for track mounting''<br /> |3<br /> |}<br /> '''&lt;big&gt;''[Current] Operator Console Enclosure for Units with 20 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS (Current) Operator Console Enclosure for Units with 20 HP Power Unit.png|alt=BE-TS (Current) Operator Console Enclosure for Units with 20 HP Power Unit|frameless|549x549px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-8&quot; X 8&quot; X 4&quot;<br /> |<br /> |''Consult factory''<br /> |1<br /> |-<br /> |2<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |3<br /> |-<br /> |3<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .625&quot; to .750&quot;''<br /> |1<br /> |-<br /> |4<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''† Grip size .450&quot; to .560&quot;''<br /> |4<br /> |-<br /> |5<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''†'' ''Grip size .250&quot; to .375&quot;''<br /> |4<br /> |-<br /> |6<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |11<br /> |-<br /> |7<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |E1349<br /> |SEAL-KNOCKOUT-1/2&quot;<br /> |<br /> |''† See notes''<br /> |A/R<br /> |-<br /> |9<br /> |43037003-2<br /> |BRACKET-MOUNTING-ENCLOSURE<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> | rowspan=&quot;4&quot; |''Mounting bracket hardware (Not shown)''<br /> |2<br /> |-<br /> |12<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |2<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Restraints sold for machines equipped with all available options. Machines built without certain options will have Knockout Seals (Item #8) installed in place of restraints.''<br /> |}<br /> '''&lt;big&gt;''[Current] Operator Console Enclosure Panel for Units with 20 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS (Current) Operator Console Enclosure Panel for Units with 20 HP Power Unit.png|alt=BE-TS (Current) Operator Console Enclosure Panel for Units with 20 HP Power Unit|frameless|527x527px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0135<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |''Blank panel without holes''<br /> |1<br /> |-<br /> |2<br /> |E0908<br /> |MOUNTING RAIL<br /> |<br /> |''Sold by length''<br /> |A/R<br /> |-<br /> |3<br /> |YE0402<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |14<br /> |-<br /> |4<br /> |YE0405<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |YE0406<br /> |END ANCHOR<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |E1074<br /> |JUMPER-2 POLE<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |E0130<br /> |GROUND BAR-7 POSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW1061<br /> |SCREW-RHMS-#8-32 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> | rowspan=&quot;3&quot; |''Track and Wireway mounting hardware (Not shown)''<br /> |2<br /> |-<br /> |10<br /> |HW0133<br /> |WASHER-FLAT-#8<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |4<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''Junction Box'''&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Junction Box.png|alt=BE-TS Junction Box|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |2<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |3<br /> |-<br /> |3<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .500&quot; to .625&quot;''<br /> |4<br /> |-<br /> |4<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .625&quot; to .750&quot;''<br /> |2<br /> |-<br /> |5<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Top Module Junction Box&lt;/big&gt;''''' ====<br /> [[File:BE-TS Top Module Junction Box.png|alt=BE-TS Top Module Junction Box|frameless|532x532px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1329<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0662<br /> |RESTRAINT-3/4&quot;-LIQUID TIGHT<br /> |<br /> |''Includes Locknut'' <br /> |1<br /> |-<br /> |3<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .625&quot; to .750&quot;''<br /> |1<br /> |-<br /> |4<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Wiring Diagrams&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;BE-TS with 10 HP Motor Wiring Diagram&lt;/big&gt;''''' ====<br /> [[File:BE-TS Wiring Diagram-10HP Motor.png|alt=BE-TS Wiring Diagram-10HP Motor|frameless|800x800px]]<br /> <br /> ==== '''''&lt;big&gt;BE-TS with Magnet and 10 HP Motor Wiring Diagram&lt;/big&gt;''''' ====<br /> [[File:BE-TS with Magnet and 10HP Motor Wiring Diagram.png|alt=BE-TS with Magnet and 10HP Motor Wiring Diagram|frameless|800x800px]]<br /> <br /> ==== '''''&lt;big&gt;BE-TS with Magnet and 20 HP Motor Wiring Diagram&lt;/big&gt;''''' ====<br /> [[File:BE-TS Magnet Wiring Diagram-20HP Motor.png|alt=BE-TS Magnet Wiring Diagram-20HP Motor|frameless|800x800px]]<br /> <br /> [[File:BE-TS Magnet Wiring Diagram-20HP Motor-02.png|alt=BE-TS Magnet Wiring Diagram-20HP Motor-02|frameless|800x800px]]<br /> <br /> [[File:BE-TS Magnet Wiring Diagram-20HP Motor-03.png|alt=BE-TS Magnet Wiring Diagram-20HP Motor-03|frameless|800x800px]]<br /> <br /> [[File:BE-TS Magnet Wiring Diagram-20HP Motor-04.png|alt=BE-TS Magnet Wiring Diagram-20HP Motor-04|frameless|800x800px]]<br /> <br /> == &lt;big&gt;Hydraulics&lt;/big&gt; ==<br /> <br /> === '''&lt;big&gt;&lt;u&gt;[Discontinued] 10 HP Power Unit&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:(Discontinued) BE-TS Power Unit (10HP).png|alt=(Discontinued) BE-TS Power Unit (10HP)|frameless|553x553px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0011<br /> |MOTOR-ELECTRIC-10HP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0326<br /> |ADAPTER-PUMP TO MOTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0325<br /> |PUMP-VANE-16 GPM<br /> |<br /> |''Variable displacement''<br /> |1<br /> |-<br /> |4<br /> |HC0327<br /> |COUPLING BODY-1 3/8&quot;<br /> |<br /> |''Motor end''<br /> |1<br /> |-<br /> |5<br /> |HC0329<br /> |SPIDER-COUPLING INSERT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HC0328<br /> |COUPLING BODY-7/8&quot;<br /> |<br /> |''Pump end''<br /> |1<br /> |-<br /> |7<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1 1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H1549<br /> |ADAPTER-#20 JICM X #24 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |H1595<br /> |ADAPTER-90 DEG-#20 JICM X #20 JICSW<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |H1609<br /> |ADAPTER-90 DEG-#12 JICM X #16 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |H1522<br /> |ADAPTER-#12 JICSW X #12 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |HC0260<br /> |VALVE-MAIN SYSTEM RELIEF<br /> |<br /> |<br /> |1<br /> |-<br /> |15a<br /> |43846003<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''†† For Item 15 (Not shown)''<br /> |A/R<br /> |-<br /> |16<br /> |HC0318<br /> |GAUGE-PRESSURE<br /> |<br /> |<br /> |1<br /> |-<br /> |17<br /> |H0206<br /> |PLUG-#4 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |H1108<br /> |ADAPTER-#10 JICM X #12 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |H1522<br /> |ADAPTER-#12 JICSW X #12 SAEM<br /> |<br /> |''† See note''<br /> |1<br /> |-<br /> |20<br /> |H1542<br /> |ADAPTER-#12 JICM X #12 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |21<br /> |HC0280<br /> |VALVE-CHECK<br /> |<br /> |''† See note''<br /> |1<br /> |-<br /> |22<br /> |H1542<br /> |ADAPTER-#12 JICM X #12 SAEM<br /> |<br /> |''† See note''<br /> |1<br /> |-<br /> |23<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .500&quot; to .625&quot;''<br /> |1<br /> |-<br /> |23a<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |''For Item 23 (Not shown)''<br /> |1<br /> |-<br /> |24<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |25<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |26<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |27<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Parts noted used on units built after April 2001.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Cartridges are for replacement only.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;[Discontinued] 30 Gallon Reservoir&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:(Discontinued) BE-TS 30 Gallon Reservoir.png|alt=(Discontinued) BE-TS 30 Gallon Reservoir|frameless|542x542px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43842001<br /> |RESERVOIR-VERTICAL-30 GAL<br /> |<br /> |''Includes Items 1 through 8''<br /> |1<br /> |-<br /> |1<br /> |HC0542<br /> |GASKET-CHANNEL<br /> |<br /> |''Sold by length''<br /> |7'<br /> |-<br /> |2<br /> |HC0340<br /> |GAUGE-SIGHT<br /> |<br /> |''with Thermometer''<br /> |1<br /> |-<br /> |3<br /> |HC0306<br /> |STRAINER-SUCTION<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HC0308<br /> |FILLER/BREATHER ASSEMBLY<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0209<br /> |SCREW-RHMS-10-32 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |BI0110<br /> |ELBOW-STR-90 DEG-#16 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |8<br /> |H0208<br /> |PLUG-#12 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1590<br /> |ADAPTER-90 DEG-#16 JICM X #16 FNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |BI0102<br /> |ELBOW-#12 FNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |BI0020<br /> |NIPPLE-#12 NPT X 3&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |BI0301<br /> |TEE-#12 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |H1502<br /> |ADAPTER-#8 JICM X #12 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |BI0002<br /> |NIPPLE-CLOSE-#12 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HC0307<br /> |RETURN LINE FILTER ASSEMBLY<br /> |<br /> |''Housing and Filter''<br /> |1<br /> |-<br /> |16<br /> |HC0317<br /> |FILTER-RETURN LINE<br /> |<br /> |''Replacement filter''<br /> |1<br /> |-<br /> |17<br /> |H1509<br /> |ADAPTER-#10 JICM X #12 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> | rowspan=&quot;4&quot; |''Mounting hardware''<br /> <br /> ''(Not shown)''<br /> |4<br /> |-<br /> |19<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |8<br /> |-<br /> |20<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |4<br /> |-<br /> |21<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;[Current] Power Unit (20 HP)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:(Current) BE-TS 30 Power Unit (20 HP).png|alt=(Current) BE-TS 30 Power Unit (20 HP)|frameless|531x531px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0040<br /> |MOTOR-ELECTRIC-20 HP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0357<br /> |ADAPTER-PUMP TO MOTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0356<br /> |PUMP-PISTON-71CC<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HC0358-M<br /> |COUPLING BODY-M300-1 5/8&quot; BORE<br /> |<br /> |''MOTOR SIDE''<br /> |1<br /> |-<br /> |5<br /> |HC0358-I<br /> |SPIDER-COUPLING INSERT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HC0358-P<br /> |COUPLING BODY-M300-1 1/4&quot; BORE<br /> |<br /> |''PUMP SIDE''<br /> |1<br /> |-<br /> |7<br /> |HW0602<br /> |BOLT-HHCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0113<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |H1604<br /> |ADAPTER-90 DEG-#12 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HC0363<br /> |ADAPTER-FLANGE-#32 NPT<br /> |<br /> |''Includes O-ring''<br /> |1<br /> |-<br /> |11<br /> |HC0240<br /> |BLOCK-CHECK VALVE<br /> |<br /> |''Includes Cartridge &amp; O-ring''<br /> |1<br /> |-<br /> |12<br /> |N/A<br /> |CARTRIDGE-CHECK VALVE<br /> |<br /> |''† Replacement cartridge''<br /> |A/R<br /> |-<br /> |13<br /> |H0300<br /> |ELBOW-STR-90 DEG-#4 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |HC0318<br /> |GAUGE-PRESSURE<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |HE0704<br /> |ADAPTER-SPLIT FLANGE-1&quot;<br /> |<br /> |''2-Piece adapter with O-ring''<br /> |1<br /> |-<br /> |16<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |H0211<br /> |ADAPTER-#24 NPT X #12<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |E0661<br /> |RESTRAINT-3/4&quot;-90 DEG-LIQUID TIGHT<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |HW0513<br /> |BOLT-HHCS-1/2-13 X 2 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |20<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |21<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTE<br /> |-<br /> | colspan=&quot;6&quot; |''† Consult factory''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;[Current] 45 Gallon Reservoir&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:(Current) BE-TS 45 Gallon Reservoir.png|alt=(Current) BE-TS 45 Gallon Reservoir|frameless|547x547px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43842010<br /> |45 GAL RESERVOIR ASSEMBLY<br /> |<br /> |''Includes Items 1 through 7''<br /> |A/R<br /> |-<br /> |1<br /> |43848005<br /> |PLATE-COVER<br /> |<br /> |''† See note''<br /> |1<br /> |-<br /> |2<br /> |HC0308<br /> |FILLER/BREATHER ASSEMBLY<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0209<br /> |SCREW-RHMS-10-32 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |4<br /> |HC0340<br /> |GAUGE-SIGHT<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H0208<br /> |PLUG-#12 NPT<br /> |<br /> |''Non-IIoT equipped units only''<br /> |1<br /> |-<br /> |6<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |7<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |8<br /> |HC0361<br /> |HOUSING-FILTER<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HC0354<br /> |CARTRIDGE-FILTER<br /> |<br /> |''10 Micron filtration''<br /> |1<br /> |-<br /> |10<br /> |HC0362<br /> |FLANGE-SUCTION TUBE<br /> |<br /> |''Includes hardware''<br /> |1<br /> |-<br /> |11<br /> |43848008<br /> |TUBE-SUCTION<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |H1569<br /> |ADAPTER-45 DEG-#12 JICM X #12 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |H0202<br /> |REDUCER-#24 SAE X #12 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |H1622<br /> |ADAPTER-90 DEG-#12 SAEM X #12 JICM<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |H1644<br /> |PLUG-#24 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |H1610<br /> |ADAPTER-45 DEG-#12 JICSW X #12 JICM<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |PB0311-1<br /> |NIPPLE-#12 NPT X 2&quot;-BRASS<br /> |<br /> | rowspan=&quot;3&quot; |''†† See notes''<br /> |1<br /> |-<br /> |20<br /> |BI0301<br /> |TEE-#12 FNPT<br /> |<br /> |1<br /> |-<br /> |21<br /> |H1502<br /> |ADAPTER-#8 JICM X #12 MNPT<br /> |<br /> |2<br /> |-<br /> |22<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> | rowspan=&quot;5&quot; |''Reservoir mounting hardware'' <br /> <br /> ''(Not shown)''<br /> |2<br /> |-<br /> |23<br /> |HW0405<br /> |BOLT-HHCS-3/8-16 X 2&quot;<br /> |<br /> |2<br /> |-<br /> |24<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |8<br /> |-<br /> |25<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |4<br /> |-<br /> |26<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† RVT silicone required to seal cover plate after removal.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Components required for units equipped with radial piston drive wheel motors plumbed with case drain hoses. See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Drive_Wheel_Assembly Drive Wheel Assembly] section.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Valve Assembly&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Lift Valve and Manifold Detail&lt;/big&gt;''''' ====<br /> [[File:BE-TS Lift Valve and Manifold.png|alt=BE-TS Lift Valve and Manifold|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |80342001<br /> |LEVER VALVE RETRO KIT<br /> |<br /> |''† Required prior to 2006'' <br /> |A/R<br /> |-<br /> |1<br /> |HC0257<br /> |VALVE-LEVER<br /> |<br /> |''Effective from 2006 to Present''<br /> |1<br /> |-<br /> |2<br /> |HC0252<br /> |MANIFOLD-D05-1 BANK<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0318<br /> |BOLT-SHCS-1/4-20 X 1 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |H1642<br /> |PLUG-#12 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H1542<br /> |ADAPTER-#12 JICM X #12 SAEM<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HC0248<br /> |FIXED FLOW REGULATOR<br /> |<br /> |''††14 GPM''<br /> |1<br /> |-<br /> |12<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |13<br /> |H1540<br /> |ADAPTER-#8 JICM X #8 SAEM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |14<br /> |43817085<br /> |PLATE-ADAPTER-VALVE<br /> |<br /> |''† Not shown''<br /> |1<br /> |-<br /> |15<br /> |SS0104<br /> |BOLT-SHCS-1/4-20 X 5/8&quot;-SST<br /> |<br /> |''† Not shown''<br /> |4<br /> |-<br /> |16<br /> |SS0300<br /> |WASHER-FLAT-1/4&quot;-SAE-SST<br /> |<br /> |''† Not shown''<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |<br /> |-<br /> | colspan=&quot;6&quot; |''† Kit includes Items 1 &amp; 14 through 16. Minor modifications to the dash board required.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† For units shipped April 2017 to present''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Floor Drive / Arm Rotation Valve and Manifold Detail&lt;/big&gt;''''' ====<br /> [[File:BE-TS Floor Drive-Arm Rotation Valve and Manifold.png|alt=BE-TS Floor Drive-Arm Rotation Valve and Manifold|frameless|570x570px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0233<br /> |VALVE-LEVER<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HC0251<br /> |MANIFOLD-D03-2 BANK<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1545<br /> |ADAPTER-#10 JICM X #10 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |H1600<br /> |ADAPTER-90 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |H1587<br /> |ADAPTER-#6 JICSW X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HC0211<br /> |VALVE-ADJUSTABLE FLOW CONTROL<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |H1504<br /> |ADAPTER-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |H1640<br /> |PLUG-#6 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |43817033-2<br /> |RISER PLATE<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |14<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |HC0233-SK<br /> |SEAL KIT<br /> |<br /> |''For Item 1 (Not shown)''<br /> |A/R<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Valve Assembly&lt;/big&gt;''''' ====<br /> [[File:BE-TS Valve Assembly.png|alt=BE-TS Valve Assembly|frameless|538x538px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0233<br /> |VALVE-LEVER<br /> |<br /> |<br /> |3<br /> |-<br /> |2<br /> |HC0250<br /> |MANIFOLD-D03-3 BANK<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1610<br /> |ADAPTER-90 DEG-#10 JICM X #10 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |H1641<br /> |PLUG-#10 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H1000<br /> |ADAPTER-#8 SAEM X #4 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |H0001<br /> |NIPPLE-#4 NPT<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HC0247<br /> |FIXED FLOW REGULATOR-2.25 GPM<br /> |<br /> |''† See notes''<br /> |4<br /> |-<br /> |8<br /> |H1504<br /> |ADAPTER-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |H1640<br /> |PLUG-#6 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |H1540<br /> |ADAPTER-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |43817034-2<br /> |RISER PLATE<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |14<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |15<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HC0233-SK<br /> |SEAL KIT<br /> |<br /> |''For Item 1 (Not shown)''<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Units built prior to January 2107 equipped with Adjustable Flow Controls. Fixed Flow Regulators are direct replacement for Adjustable Flow Controls.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Lift Cylinder&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Lift Cylinder.png|alt=BE-TS Lift Cylinder|frameless|582x582px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43822006<br /> |CLEVIS ASSEMBLY<br /> |<br /> |''Sold as assembly only''<br /> |4<br /> |-<br /> |2<br /> |HW0813<br /> |SCREW-SHSS-3/8-16 X 1/2&quot;<br /> |<br /> |''Nylon tipped''<br /> |8<br /> |-<br /> |3<br /> |HC0420<br /> |CYLINDER-LIFT<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |H1645<br /> |ADAPTER-90 DEG-#8 SAEM X #6 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |H0212<br /> |ADAPTER-#6 NPT X #8 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HC0425<br /> |VELOCITY FUSE<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Lift Circuit&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Lift Circuit.png|alt=BE-TS Lift Circuit|frameless|553x553px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43017014-2<br /> |SUPPORT-PILOT DOWN MANIFOLD<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43718008<br /> |STANDOFF<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0315<br /> |BOLT-HHCS-1/4-20 X 4 1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |10<br /> |-<br /> |7<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |5<br /> |-<br /> |8<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |5<br /> |}<br /> <br /> ==== '''''&lt;big&gt;[Discontinued] Lift Circuit Configuration&lt;/big&gt;''''' ====<br /> [[File:(Discontinued) BE-TS Lift Circuit Configuration.png|alt=(Discontinued) BE-TS Lift Circuit Configuration|frameless|507x507px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |H1507<br /> |ADAPTER-#8 JICM X #8 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0264<br /> |VALVE-CHECK-PILOT TO OPEN<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H1621<br /> |ADAPTER-#4 SAEM X #2 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HC0269<br /> |VALVE-ADJUSTABLE FLOW CONTROL<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |H1591<br /> |ADAPTER-90 DEG-#6 JICM X #2 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |H1587<br /> |ADAPTER-#6 JICSW X #4 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1501<br /> |ADAPTER-#8 JICM X #6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43047002<br /> |MANIFOLD-PILOT DOWN<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> ==== '''''&lt;big&gt;[Current] Lift Circuit Configuration&lt;/big&gt;''''' ====<br /> [[File:(Current) BE-TS Lift Circuit Configuration.png|alt=(Current) BE-TS Lift Circuit Configuration|frameless|534x534px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0215<br /> |VALVE-CHECK-CARTRIDGE<br /> |<br /> |<br /> |8<br /> |-<br /> |2<br /> |H1560<br /> |ADAPTER-45 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |H1670<br /> |ADAPTER-45 DEG-#12 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |H1612<br /> |ADAPTER-90 DEG-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HC0283<br /> |VALVE-COUNTER BALANCE<br /> |<br /> |''Includes cartridge''<br /> |1<br /> |-<br /> |6<br /> |43846004<br /> |CARTRIDGE-COUNTER BALANCE<br /> |<br /> |''Replacement cartridge''<br /> |A/R<br /> |-<br /> |7<br /> |H1552<br /> |ADAPTER-#6 JICM X #6 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |H1587<br /> |ADAPTER-#6 JICSW X #4 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1501<br /> |ADAPTER-#8 JICM X #6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43047002<br /> |MANIFOLD-PILOT DOWN<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Cartridges are for replacement only''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Down-Speed Flow Control&lt;/big&gt;''''' ====<br /> [[File:BE-TS Down-Speed Flow Control.png|alt=BE-TS Down-Speed Flow Control|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0270<br /> |VALVE-ADJUSTABLE FLOW CONTROL<br /> |<br /> |''Pressure compensated''<br /> |1<br /> |-<br /> |2<br /> |H0007<br /> |NIPPLE-#8 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1647<br /> |ADAPTER-90 DEG-#10 SAEM X #8 FNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |H1680<br /> |ADAPTER-#10 JICM X #8 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H1690<br /> |ADAPTER-#10 JICSW X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HC0248<br /> |FIXED FLOW REGULATOR<br /> |<br /> |''14 GPM''<br /> |1<br /> |-<br /> |7<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |H1612<br /> |ADAPTER-90 DEG-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1547<br /> |ADAPTER-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Cross Port Relief&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Mounting Configuration&lt;/big&gt;''''' ====<br /> [[File:BE-TS Cross Port Relief Mounting Configuration.png|alt=BE-TS Cross Port Relief Mounting Configuration|frameless|546x546px]]<br /> {| class=&quot;wikitable&quot;<br /> ! colspan=&quot;6&quot; |UNITS BUILT PRIOR TO SEPTEMBER, 2014<br /> |-<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> ! colspan=&quot;6&quot; |UNITS BUILT SEPTEMBER, 2014 TO DECEMBER, 2014<br /> |-<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW0305<br /> |BOLT-HHCS-1/4-20 X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |7<br /> |43058004<br /> |PLATE-SPACER<br /> |<br /> |<br /> |1<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> ! colspan=&quot;6&quot; |UNITS BUILT DECEMBER, 2014 TO PRESENT<br /> |-<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |2<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |}<br /> ''NOTE: Effectivity dates refer to dates new extractor units shipped from the factory. Replacement part effectivity may differ due to factory inventory levels at time of parts order. Consult factory if unsure of parts needed.''<br /> <br /> ==== '''''&lt;big&gt;Components&lt;/big&gt;''''' ====<br /> [[File:BE-TS Cross Port Relief Components.png|alt=BE-TS Cross Port Relief Components|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0262<br /> |VALVE-CROSS PORT RELIEF<br /> |<br /> |''Includes cartridges''<br /> |1<br /> |-<br /> |2<br /> |43046002<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''For Item 1''<br /> |A/R<br /> |-<br /> |3<br /> |H1540<br /> |ADAPTER-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |H1507<br /> |ADAPTER-#8 JICM X #8 MNPT<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |HC0239<br /> |VALVE-ADJUSTABLE FLOW CONTROL<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |H1568<br /> |ADAPTER-45 DEG-#8 JICM X #8 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |H1646<br /> |ADAPTER-90 DEG-#8 SAEM X #6 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |H0805<br /> |TEE-#6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HC0273<br /> |REGULATOR-FIXED FLOW<br /> |<br /> |''7.0 GPM''<br /> |4<br /> |-<br /> |11<br /> |H1501<br /> |ADAPTER-#8 JICM X #6 MNPT<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Floor Drive Cutout&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Floor Drive Cutout.png|alt=BE-TS Floor Drive Cutout|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |SOLENOID-DRIVE CUTOUT<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |7<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |BI0001<br /> |NIPPLE-CLOSE-#8 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |N/A<br /> |SOLENOID-DRIVE CUTOUT<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |10<br /> |YE0501<br /> |CONNECTOR-SOLENOID<br /> |<br /> |''DIN 43650''<br /> |1<br /> |-<br /> |11<br /> |43058004<br /> |PLATE-SPACER<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |HC0278-TS/QS<br /> |SOLENOID-DRIVE CUTOUT<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |H1547<br /> |ADAPTER-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |H1612<br /> |ADAPTER-90 DEG-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Part obsolete. Must be replaced with Retro Kit Part # 80242007.''<br /> |-<br /> | colspan=&quot;6&quot; |''NOTE: Effectivity dates refer to dates new extractor units shipped from the factory. Replacement part effectivity may differ due to factory inventory levels at time of parts order. Consult factory if unsure of parts needed.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Counter Balance Valve&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Counter Balance Valve.png|alt=BE-TS Counter Balance Valve|frameless|554x554px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0263<br /> |VALVE-COUNTER BALANCE<br /> |<br /> |<br /> |1<br /> |-<br /> |1a<br /> |43046004<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''† For Item 1 (Not shown)''<br /> |A/R<br /> |-<br /> |2<br /> |H1615<br /> |ADAPTER-90 DEG-#6 JICM X #6 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |H1552<br /> |ADAPTER-#6 JICM X #6 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0305<br /> |BOLT-HHCS-1/4-20 X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Cartridges are for replacement only''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Transition Plate&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Transition Plate.png|alt=BE-TS Transition Plate|frameless|576x576px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817067-2<br /> |PLATE-TRANSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |H0020<br /> |UNION-BULKHEAD-45 DEG-#6 JICM<br /> |<br /> |<br /> |8<br /> |-<br /> |3<br /> |H0021<br /> |NUT-BULKHEAD-#6 JIC<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Return Line Manifold&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Return Line Manifold.png|alt=BE-TS Return Line Manifold|frameless|555x555px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43847001<br /> |MANIFOLD-RETURN LINE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |H1501<br /> |ADAPTER-#8 JICM X #6 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1503<br /> |ADAPTER-#12 JICM X #12 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |43817069-2<br /> |BRACKET-BULKHEAD<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |H0015<br /> |UNION-BULKHEAD-90 DEG-#12 JICM<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H0016<br /> |NUT-BULKHEAD-#12 JIC<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;EQ Chain Hose Guard&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS EQ Chain Hose Guard.png|alt=BE-TS EQ Chain Hose Guard|frameless|577x577px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43017074-2<br /> |GUARD-HOSE-EQ CHAIN<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Used on units manufactured after May 2015.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Hydraulic Schematics&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Hydraulic Schematic.png|alt=BE-TS Hydraulic Schematic|frameless|1180x1180px]]<br /> <br /> ==== '''''&lt;big&gt;Extended Reach Hydraulic Schematics&lt;/big&gt;''''' ====<br /> [[File:BE-TS Hydraulic Schematic Extended Reach.png|alt=BE-TS Hydraulic Schematic Extended Reach|frameless|905x905px]]<br /> <br /> == &lt;big&gt;Standard Available Options&lt;/big&gt; ==<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Strobe &amp; Alarm&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''&lt;big&gt;''[Discontinued] Strobe Light &amp; Stanchion Configuration''&lt;/big&gt;''' ====<br /> [[File:(Discontinued) BE-TS Strobe Light.png|alt=(Discontinued) BE-TS Strobe Light|frameless|722x722px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0317<br /> |STROBE LIGHT<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41215014<br /> |STANCHION<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0401<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |E1010<br /> |RECEPTACLE-TWIST LOCK<br /> |<br /> |''(Not shown)''<br /> |1<br /> |-<br /> |7<br /> |E1011<br /> |PLUG-TWIST LOCK<br /> |<br /> |''(Not shown)''<br /> |1<br /> |}<br /> <br /> ==== '''&lt;big&gt;''[Discontinued] Audible Alarm Configuration''&lt;/big&gt;''' ====<br /> [[File:(Discontinued) BE-TS Audible Alarm.png|alt=(Discontinued) BE-TS Audible Alarm|frameless|490x490px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0317-A<br /> |AUDIBLE ALARM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0654<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |00117101-2<br /> |MOUNTING BRACKET<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |5<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> ==== '''&lt;big&gt;''[Current] Stack Light Strobe &amp; Alarm Configuration''&lt;/big&gt;''' ====<br /> [[File:(Current) BE-TS Stack Light Strobe and Alarm Configuration.png|alt=(Current) BE-TS Stack Light Strobe and Alarm Configuration|frameless|844x844px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0362<br /> |MOUNTING BASE<br /> |<br /> |''Includes restraints''<br /> |1<br /> |-<br /> |2<br /> |E0365<br /> |TERMINAL BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0363<br /> |STROBE LIGHT-AMBER-120VAC<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |4<br /> |E0364<br /> |AUDIBLE ALARM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |5<br /> |SS0118<br /> |SCREW-SHCS-#8-32 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |SS0303<br /> |WASHER-FLAT-#8<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |SS0203<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |E1010<br /> |RECEPTACLE-TWIST LOCK<br /> |<br /> |''(Not shown)''<br /> |1<br /> |-<br /> |9<br /> |E1011<br /> |PLUG-TWIST LOCK<br /> |<br /> |''(Not shown)''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† For units not equipped with the audible alarm option, a cap (not shown) mounts on top of the strobe light in place of the audible alarm. Cap included with base.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† For units not equipped with the strobe light option, the audible alarm mounts directly to the terminal base in place of the strobe light.'' <br /> |}<br /> <br /> ==== '''&lt;big&gt;''Strobe &amp; Alarm Mounting''&lt;/big&gt;''' ====<br /> [[File:BE-TS Strobe and Alarm Mounting.png|alt=BE-TS Strobe and Alarm Mounting|frameless|516x516px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41235060<br /> |STACK LIGHT STANCHION<br /> |<br /> |''Discontinued''<br /> |A/R<br /> |-<br /> |2<br /> |HW0401<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |3<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |4<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |REF<br /> |43032006<br /> |STANCHION ASSEMBLY<br /> |<br /> |''Includes items 5 through 8''<br /> |A/R<br /> |-<br /> |5<br /> |43035003<br /> |STACK LIGHT STANCHION<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43037007-2<br /> |CLAMP BRACKET<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0305<br /> |BOLT-HHCS-1/4-20 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0050<br /> |NUT-FLANGED-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |43037004-2<br /> |MOUNTING BRACKET<br /> |<br /> |''Overhead Guard only''<br /> |1<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Horn&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Horn.png|alt=BE-TS Horn|frameless|565x565px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |YE0308<br /> |BUTTON-HORN<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0317-A<br /> |AUDIBLE ALARM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0654<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |00117101-2<br /> |MOUNTING BRACKET<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |11<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Overhead Guard&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Overhead Guard.png|alt=BE-TS Overhead Guard|frameless|530x530px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817119-2<br /> |GUARD-SIDE<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |2<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0406<br /> |BOLT-HHCS-3/8-16 X 2-1/2&quot;<br /> |<br /> |<br /> |5<br /> |-<br /> |5<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |6<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |<br /> |<br /> |5<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Side Guards used on units built November 2013 to Present. Mounting hardware valid for all units with Removable Overhead Guard.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Operator Sheild&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''&lt;big&gt;''[Current] Operator Shield''&lt;/big&gt;''' ====<br /> [[File:(Current) BE-TS 30 Operator Sheild.png|alt=(Current) BE-TS 30 Operator Sheild|frameless|566x566px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43814025<br /> |OPERATOR SHIELD<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |HC0542<br /> |GASKET EDGING<br /> |<br /> |''(2) @ 38&quot; LG, (1) @ 60&quot; LG''<br /> |136&quot;<br /> |-<br /> |3<br /> |43817116-2<br /> |BRACKET-TOP<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |1412FSW<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |43817117-2<br /> |BRACKET-CENTER SUPPORT-OUTSIDE<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43817118-2<br /> |BRACKET-CENTER SUPPORT-INSIDE<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |SS0114<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |8<br /> |SS0502<br /> |LANYARD-8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |SS0501<br /> |PIN-QUICK RELEASE-3/16&quot; X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Consult factory for units built prior to November 2013 with plexiglass bolted directly to Overhead Guard structure on front and sides.'' <br /> |}<br /> <br /> ==== '''&lt;big&gt;''Operator Shield (Used Prior to November 2013)''&lt;/big&gt;''' ====<br /> [[File:BE-TS Operator Shield (Used Prior to November 2013).png|alt=BE-TS Operator Shield (Used Prior to November 2013)|frameless|559x559px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43717116<br /> |SHIELD-OPERATOR<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |43015010<br /> |FRAME-OPERATOR SHIELD WELDMENT<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43017066-2<br /> |SUPPORT-SIDE<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |43017065-2<br /> |SUPPORT-LOWER<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43017067-2<br /> |SUPPORT-UPPER<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |7<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |32<br /> |-<br /> |8<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |9<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |16<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Consult factory for units with plexiglass bolted directly to frame.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Powered Roller Cutout&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Powered Roller Cutout Photo Eye &amp; Reflector Locations (Prior to May 2022)&lt;/big&gt;''''' ====<br /> [[File:BE-TS Powered Roller Cutout Photo Eye &amp; Reflector Locations.png|alt=BE-TS Powered Roller Cutout Photo Eye &amp; Reflector Locations|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1321A<br /> |PHOTO EYE<br /> |<br /> |''† Polarized''<br /> |1<br /> |-<br /> |2<br /> |41217170-2<br /> |MOUNT-PHOTO EYE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0216<br /> |SCREW-#10-24 X 2&quot;<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |4<br /> |HW0032<br /> |NUT-NILN-#10-24<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |E1321-R<br /> |REFLECTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |41217171<br /> |MOUNT-REFLECTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |SS0803<br /> |SCREW-RHMS-#6-32 X 5/8&quot;<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |8<br /> |SS0125<br /> |BOLT-HHCS-1/4-20 X 5/8&quot;<br /> |<br /> |''††† See notes''<br /> |4<br /> |-<br /> |9<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''Quantities provided are for Single-Sided (PRC-1) Power Roller Cutout option. For units with Double Sided (PRC-2) option, quantities are double.''<br /> |-<br /> | colspan=&quot;6&quot; |''† Polarized Photo Eye recommended to prevent potential operational issues with very smooth or shiny battery cases.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Photo Eye &amp; Reflector mounting screws are trimmed to length.''<br /> |-<br /> | colspan=&quot;6&quot; |''††† Photo Eye &amp; Reflector Bracket Mounting Screws may be required to ground flush to prevent intereferance with guards.''<br /> |}<br /> '''''&lt;big&gt;Powered Roller Cutout Photo Eye &amp; Reflector Locations (May 2022 to Present)&lt;/big&gt;'''''<br /> <br /> [[File:BE-TS Powered Roller Cutout Photo Eye &amp; Reflector Locations (May 2022 to Present).png|alt=BE-TS Powered Roller Cutout Photo Eye &amp; Reflector Locations (May 2022 to Present)|frameless|555x555px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1321A<br /> |PHOTO EYE<br /> |<br /> |''† Polarized''<br /> |1<br /> |-<br /> |2<br /> |13537001-2<br /> |MOUNT-PHOTO EYE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E1321-R<br /> |REFLECTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |41217171<br /> |MOUNT-REFLECTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |SS0803<br /> |SCREW-RHMS-#6-32 X 5/8&quot;<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |PL0506<br /> |GROMMET-SEALING-2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''Quantities provided are for Single-Sided (PRC-1) Power Roller Cutout option. For units with Double Sided (PRC-2) option, quantities are double.''<br /> |-<br /> | colspan=&quot;6&quot; |''† Polarized Photo Eye recommended to prevent potential operational issues with very smooth or shiny battery cases.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Reflector mounting screws are trimmed to length.''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Powered Roller Cutout Mounting&lt;/big&gt;''''' ====<br /> [[File:BE-TS Powered Roller Cutout Mounting.png|alt=BE-TS Powered Roller Cutout Mounting|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0281<br /> |SOLENOID VALVE<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |BI0001<br /> |NIPPLE-CLOSE-#8 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |6<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |7<br /> |H1600<br /> |ADAPTER-90 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |H1546<br /> |ADAPTER-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Powered Roller Cutout Override Button&lt;/big&gt;''''' ====<br /> [[File:BE-TS Powered Roller Cutout Override Button.png|alt=BE-TS Powered Roller Cutout Override Button|frameless|568x568px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ACTUATOR-PUSH BUTTON (DISCONTINUED)<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |N/A<br /> |CONTACT BLOCK-N/C (DISCONTINUED)<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |3<br /> |E0384<br /> |ACTUATOR-PUSH BUTTON<br /> |80932002<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0386<br /> |CONTACT BLOCK-N/C<br /> |80932002<br /> |<br /> |1<br /> |-<br /> |5<br /> |E0387<br /> |DUMMY BLOCK<br /> |80932002<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0388<br /> |PUSH BUTTON-GREEN<br /> |80932002<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''Button location on dash may vary from position shown.''<br /> |-<br /> | colspan=&quot;6&quot; |''† Parts no longer available. Must order new Push-Button Switch Kit 80932002''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Powered Roller Cutout Junction Box&lt;/big&gt;''''' ====<br /> [[File:BE-TS Powered Roller Cutout Junction Box.png|alt=BE-TS Powered Roller Cutout Junction Box|frameless|535x535px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |3<br /> |-<br /> |4<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |4<br /> |-<br /> |5<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |7<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |''Mounting bolts (Not shown)''<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Level Assist&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Level Assist.png|alt=BE-TS Level Assist|frameless|568x568px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1321A<br /> |PHOTO EYE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |13537001-2<br /> |MOUNT-PHOTO EYE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |PL0502<br /> |GROMMET<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43837007<br /> |TARGET ANGLE<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |E0376<br /> |INDICATOR LIGHT<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |7<br /> |HW0152<br /> |WASHER-5/8&quot; I.D.<br /> |<br /> |''†† See notes (Not shown)''<br /> |2<br /> |-<br /> |8<br /> |E1321-RT<br /> |REFLECTIVE TAPE<br /> |<br /> |''(Not shown)''<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''Location of Indicator Light on the dash may vary from location shown''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Extractors built prior to October 2021 used Multi-Piece Indicator Lights with Replaceable Bulb and Lens are no longer available. Current Indicator Light is a 1-Piece LED Assembly. Replacement of any Multi-Piece Component requires replacing entire assembly with current, 1-Piece Indicator Light.''<br /> |-<br /> | colspan=&quot;6&quot; |''††† Washers required for units that did not ship with Level Assist option from the factory.''<br /> |}<br /> '''&lt;big&gt;''Level Assist Junction Box''&lt;/big&gt;'''<br /> <br /> [[File:BE-TS Level Assist Junction Box.png|alt=BE-TS Level Assist Junction Box|frameless|524x524px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |4<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |5<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |''Mounting bolts (Not shown)''<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Blue Light&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Blue Light.png|alt=BE-TS Blue Light|frameless|611x611px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |EW2002B<br /> |BLUE PROJECTION SPOTLIGHT<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW0401<br /> |BOLT-HHCS-3/8-16 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0107<br /> |WASHER-LOCK-3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |4<br /> |-<br /> |5<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43835001<br /> |STANCHION-POWER<br /> |<br /> |<br /> |2<br /> |}<br /> [[File:BE-TS Blue Light Enclosure.png|alt=BE-TS Blue Light Enclosure|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-8&quot; X 8&quot; X 4&quot;<br /> |<br /> |''Consult factory''<br /> |1<br /> |-<br /> |2<br /> |E0135<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |''Blank panel without holes''<br /> |1<br /> |-<br /> |3<br /> |PS5R-SC12<br /> |POWER SUPPLY<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0908<br /> |MOUNTING RAIL<br /> |<br /> |''Sold by length''<br /> |A/R<br /> |-<br /> |5<br /> |YE0402<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |YE0405<br /> |END BARRIER<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |YE0406<br /> |END ANCHOR<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |E0341<br /> |GROUND LUG<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |3<br /> |-<br /> |10<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |11<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |''2 per Mounting Rail''<br /> |5<br /> |-<br /> |12<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |''2 per Mounting Rail''<br /> |5<br /> |-<br /> |13<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |''2 per Mounting Rail''<br /> |5<br /> |-<br /> |14<br /> |00196404<br /> |LABEL-DANGER<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Water Cart&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Water Cart.png|alt=BE-TS Water Cart|frameless|549x549px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PB0033<br /> |OVERFILL INDICATOR<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |PB0034<br /> |LOCKNUT-CONDUIT-2&quot;-NYLON<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0308<br /> |FILLER/BREATHER ASSEMBLY<br /> |<br /> |Includes gaskets<br /> |1<br /> |-<br /> |4<br /> |HW0209<br /> |SCREW-RHMS-10-32 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |5<br /> |550-057<br /> |HOSE-FILL-3/4&quot; X 15'<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |550-027<br /> |ON/OFF VALVE<br /> |<br /> |''(Not shown)''<br /> |1<br /> |-<br /> |7<br /> |PB0902<br /> |HOSE-3/4&quot;<br /> |<br /> |<br /> |30&quot;<br /> |-<br /> |8<br /> |HW1018<br /> |HOSE CLAMP-3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |PB0603<br /> |ADAPTER-3/4&quot; NPT X 3/4&quot; BARB<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |PB0456<br /> |ELBOW-STR-90 DEG-3/4&quot; NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |PB0451<br /> |ADAPTER-3/4&quot; NPT X 3/4 GHT<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |PB0302<br /> |PLUG-3/4&quot; NPT<br /> |<br /> |<br /> |<br /> |-<br /> |13<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |14<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |SS0106<br /> |SHCS-#10-24 X 1/2&quot;-SST<br /> |<br /> |<br /> |6<br /> |-<br /> |16<br /> |SS0114<br /> |BHSCS-#10-24 X 1/2&quot; SST<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |SS0301<br /> |WASHER-FLAT-#10-SAE-SST<br /> |<br /> |<br /> |10<br /> |-<br /> |18<br /> |00196701<br /> |DECAL-BHS-12&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |00196404<br /> |LABEL-DANGER-&quot;120 VOLTS&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |20<br /> |00166648<br /> |LABEL, NON-POTABLE<br /> |<br /> |<br /> |1<br /> |-<br /> |21<br /> |HW0418<br /> |BOLT-HHCS-3/8-16 X 2-1/4&quot;<br /> |<br /> | rowspan=&quot;3&quot; |''Mounting bolts'' <br /> <br /> ''(Not shown)''<br /> |2<br /> |-<br /> |22<br /> |HW0031<br /> |NUT-HEX-3/8-16 CENTERLOCK<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |2<br /> |}<br /> [[File:BE-TS Water Cart 2.png|alt=BE-TS Water Cart|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1511<br /> |SWITCH-ROCKER<br /> |<br /> |Submersible rated<br /> |1<br /> |-<br /> |2<br /> |E0378<br /> |INDICATOR LIGHT-120VAC-GREEN<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |3<br /> |E0376<br /> |INDICATOR LIGHT-120VAC-AMBER<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |4<br /> |E0377<br /> |INDICATOR LIGHT-120VAC-RED<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |5<br /> |46917015<br /> |PLACARD-INDICATOR LIGHT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0505<br /> |16-3 SO CORD<br /> |<br /> |<br /> |72&quot;<br /> |-<br /> |7<br /> |E0653<br /> |PLUG-120V/15A<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |9<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |PL0501<br /> |GROMMET-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |E1313<br /> |SOCKET-RELAY-8 PIN<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |E0331<br /> |RELAY-DPDT-110VAC<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |E0440<br /> |TERMINAL BLOCK-8 POLE<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |E1070<br /> |GROUND BAR-4 POSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |HW0139<br /> |SCREW-RHMS-#8-32 X 1 1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |HW0135<br /> |SCREW-RHMS-#8-32 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW1061<br /> |SCREW-RHMS-#8-32 X 1&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |5<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Water carts built prior to October 2021 used Multi-Piece Indicator Lights with Replaceable Bulb and Lens and are no longer available. Current Indicator Lights are a 1-Piece LED Assemblly.'' <br /> <br /> ''Replacement of any Mutli-Piece component requires replacing entire assembly with current 1-Piece Indicator Light.'' <br /> |}<br /> <br /> = &lt;big&gt;Service &amp; Maintenance&lt;/big&gt; =<br /> <br /> == &lt;big&gt;Daily Inspection List&lt;/big&gt; ==<br /> The points listed below should be visually inspected daily prior to initial start up of the Battery Extractor to ensure safe and proper operation of the unit and to help avoid unnecessary down time.<br /> <br /> # Walk around unit and inspect for any physical damage to machine not previously noted.<br /> # Verify all guards are in place.<br /> # Inspect the AC power feed for any damage.<br /> # Vacuum equipped units: Inspect vacuum cups for damage to cup sealing surface, backup casting, and vacuum hoses. Magnet equipped units: Inspect magnets for damage to attachment face, proximity sensor cover, cables and connections.<br /> # Inspect travel path and area around unit for any hydraulic oil that could be a potential repair/maintenance issue and/or safety hazard.<br /> # Check oil level in hydraulic reservoir at fill level gauge.<br /> # Check that operator safety gate and all safety switches are in proper working order.<br /> # Verify extractor path is free of obstructions.<br /> # Check roller beds for any debris and clean as required.<br /> # Board unit, engage system and verify all functions are operating properly and that no abnormal or unusual noises are present.<br /> <br /> ''* Use form IF-5008 when preforming daily inspections''<br /> <br /> == &lt;big&gt;Operator's Daily Checklist&lt;/big&gt; ==<br /> [[File:BE-TS Operator's Daily Checklist.png|alt=BE-TS Operator's Daily Checklist|frameless|1180x1180px]]<br /> <br /> == &lt;big&gt;Recommended Battery Extractor Lubrication Intervals&lt;/big&gt; ==<br /> {| class=&quot;wikitable&quot;<br /> !Lubrication Task<br /> !'''# of Places'''<br /> !Intervals<br /> |-<br /> |'''1. Lubricate grease fittings using #2 lithium based grease'''<br /> |<br /> |<br /> |-<br /> |A. Extractor arm drive nut and carrier bearings<br /> |5 places<br /> |50 hrs / Weekly<br /> |-<br /> |B. Idler casters<br /> |2 places<br /> |200 hrs / Weekly<br /> |-<br /> |'''2. Wipe off and lubricate chains using light machine oil'''<br /> |<br /> |<br /> |-<br /> |A. #80 Lift chains (Not applicable to BE-SL units)<br /> |4 places<br /> |200 hrs / Monthly<br /> |-<br /> |B. #60 Equalization chains<br /> |4 places<br /> |200 hrs / Monthly<br /> |-<br /> |C. #35 Powered roller chains<br /> |8 places<br /> |200 hrs / Monthly<br /> |-<br /> |'''3. Change return line hydraulic fluid filter'''<br /> ''(Oil filtration of at least 20 microns is recommended)''<br /> |1 place<br /> |300 hrs / Twice Quarterly<br /> |-<br /> |'''4. Change hydraulic fluid'''<br /> | -<br /> |600 hrs / Quarterly *<br /> |-<br /> |'''5. Complete preventative maintenance (PM)'''<br /> Use form IF-5029 for Vacuum equipped units.<br /> <br /> Use form IF-5028 for Magnet equipped units.<br /> | -<br /> |600 hrs / Quarterly<br /> |-<br /> ! colspan=&quot;3&quot; |NOTES<br /> |-<br /> | colspan=&quot;3&quot; |''These recommendations are based on average use in a typical warehouse environment and may be adjusted based on specific circumstances. Dusty and/or extreme hot/cold environments may require more frequent lubrication.''<br /> |-<br /> | colspan=&quot;3&quot; |''* BHS recommends implementing an oil sampling and analysis program to monitor hydraulic fluid condition and determine when hydraulic fluid changes are required. The fluid analysis program should be a continuous process and all results should be evaluated. Changes in the condition of the hydraulic system may indicate component wear, fluid deterioration and/or contamination.''<br /> |}<br /> {|<br /> |[[File:NOTICE-warn.png|alt=NOTICE|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:NOTICE-warn.png]]<br /> |<br /> *'''The mounted bearings used on the power rollers, equalization shafts, drive wheels, and drive screw are sealed and shielded bearings. Lubrication may breach the seals of these bearings, therefore these bearings should not be lubricated unless the machine has been cleaned with a high pressure wash on a regular basis (not recommended).'''<br /> *'''Hydraulic fluid should not exceed 140°F (60°C) for extended periods.'''<br /> |}<br /> ===&lt;big&gt;'''&lt;u&gt;Reservoir Capacities ''(APPROX.)''&lt;/u&gt;'''&lt;/big&gt;===<br /> {|<br /> |BE-SL<br /> |18 gal (68 L)<br /> |-<br /> |BE-DS<br /> |18 gal (68 L)<br /> |-<br /> | rowspan=&quot;2&quot; |BE-TS<br /> |30 gal (114 L) ''(Units built Pre-2014)''<br /> |-<br /> |45 gal (170 L) ''(Units built 2014 to Present)''<br /> |-<br /> |BE-QS<br /> |60 gal (227 L)<br /> |}The reservoir should be filled so fluid level is within a half inch (1/2&quot;) of the top of sight glass. Use Chevron AW 68 or equivalent ISO 68 grade hydraulic oil with anti-wear additives and foam suppressant.<br /> <br /> '''''NOTE'':''' Some units shipped from the factory with AW 32 oil for cold environment operation. Units using AW 32 from the factory may experience poor performance if AW 68 is used instead of AW 32 due to the increased viscosity of the oil.<br /> <br /> ==&lt;big&gt;Preventative Maintenance Reports&lt;/big&gt;==<br /> ===&lt;big&gt;&lt;u&gt;Vacuum Extraction&lt;/u&gt;&lt;/big&gt;===<br /> [[File:Battery Extractor Series - Vacuum Extraction Planned Maintenance Inspection Report Page 1.png|alt=Battery Extractor Series - Vacuum Extraction Planned Maintenance Inspection Report Page1|frameless|1238x1238px|link=https://tech.bhs1.com/index.php/File:Battery_Extractor_Series_-_Vacuum_Extraction_Planned_Maintenance_Inspection_Report_Page_1.png]]<br /> <br /> [[File:Battery Extractor Series - Vacuum Extraction Planned Maintenance Inspection Report page2.png|alt=Battery Extractor Series - Vacuum Extraction Planned Maintenance Inspection Report Page 2|frameless|1230x1230px|link=https://tech.bhs1.com/index.php/File:Battery_Extractor_Series_-_Vacuum_Extraction_Planned_Maintenance_Inspection_Report_page2.png]]<br /> ===&lt;big&gt;&lt;u&gt;Magnet Extraction&lt;/u&gt;&lt;/big&gt;===<br /> [[File:Battery Extractor Series - Magnet Extraction Planned Maintenance Inspection Report Page 1.png|alt=Battery Extractor Series - Magnet Extraction Planned Maintenance Inspection Report Page 1|frameless|1224x1224px|link=https://tech.bhs1.com/index.php/File:Battery_Extractor_Series_-_Magnet_Extraction_Planned_Maintenance_Inspection_Report_Page_1.png]]<br /> <br /> [[File:Battery Extractor Series - Magnet Extraction Planned Maintenance Inspection Report Page 2.png|alt=Battery Extractor Series - Magnet Extraction Planned Maintenance Inspection Report Page 2|frameless|1233x1233px|link=https://tech.bhs1.com/index.php/File:Battery_Extractor_Series_-_Magnet_Extraction_Planned_Maintenance_Inspection_Report_Page_2.png]]<br /> <br /> ==&lt;big&gt;80292002-i – Equalization Chain Installation / Resetting Procedure&lt;/big&gt;==<br /> ===&lt;big&gt;&lt;u&gt;Required Tools&lt;/u&gt;&lt;/big&gt;===<br /> *Large standard screwdriver<br /> *1/8&quot;, 5/32&quot;, 3/16&quot; Allen wrench<br /> *(2) 1-1/8&quot; Open-end wrenches<br /> *Needle nose pliers<br /> *6&quot; Steel scale (ruler)<br /> *Brake cleaner (non-chlorinated)<br /> *Loctite #242 (blue)<br /> *80292002 - E.Q. Adjustment stop kit (SL, DS, TS) or 80492001 - BE-QS E.Q. Adjustment stop kit<br /> *Ladder or work platform ''(see notes)''<br /> ===&lt;big&gt;&lt;u&gt;''Optional Tools''&lt;/u&gt;&lt;/big&gt;===<br /> *Wire brush for removing Loctite from components prior to reassembly<br /> ===&lt;big&gt;&lt;u&gt;Notes&lt;/u&gt;&lt;/big&gt;===<br /> *''A ladder, man lift or other device is required to access the upper E.Q. studs on BE-TS and BE-QS units.''<br /> *''The following procedures must be performed with the extractor unloaded and in a level area of the travel path.''<br /> *''Installation of the E.Q. stop kit requires (4) persons plus a trained battery extractor operator to raise and lower the inner carriage.''<br /> *''It is recommended to have new E.Q. chain connecting links on hand prior to performing the following procedures.''<br /> *''The upper E.Q. stud lock washers cannot be reused and must be replaced prior to reassembly.''<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Page 369 Image 0001.png|alt=BE-TS with EQ Adjustment Stops Installed|none|thumb|300x300px|BE-TS with EQ Adjustment Stops Installed|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Page_369_Image_0001.png]]<br /> ===&lt;big&gt;&lt;u&gt;IMPORTANT&lt;/u&gt;&lt;/big&gt;===<br /> *'''Read and understand the Safety and De-energization Procedure TP-606 before starting this procedure.'''<br /> *'''Read and understand these instructions completely before starting this procedure.'''<br /> ===&lt;big&gt;&lt;u&gt;Procedure&lt;/u&gt;&lt;/big&gt;===<br /> 1. Remove the inner and outer frame guards to access the lower equalization studs.<br /> <br /> 2. Raise the inner frame approximately 30&quot; (762 mm) for SL, DS and TS units or 50&quot; (1270 mm) for QS units from the fully lowered position. Install (1) adjustment stop at each corner of the roller bed. See Figure 1.[[File:IOP-400 BE-SL&amp;DS (10-23) EQ Chain Instructions-Figure1.png|alt=|none|thumb|375x375px|FIGURE 1|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_EQ_Chain_Instructions-Figure1.png]]3. Slowly lower the inner carriage until the roller bed is firmly and securely seated against all four stops. See Figure 2.[[File:IOP-400 BE-SL&amp;DS (10-23) Page 370 Image 0002.png|alt=Roller bed firmly seated against all four stops|none|thumb|398x398px|FIGURE 2|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Page_370_Image_0002.png]]4. Lockout/tagout the B.E. per your corporate policy.<br /> <br /> 5. De-energize the B.E. per BHS Safety and De-energization procedure TP-606.<br /> <br /> 6. Loosen and remove the upper hex nuts and remove the upper chain studs. Remove the lock washers from the upper chain studs. Save the hex nuts for reassembly later. Discard the lock washers and obtain new, 3/4&quot; split-ring lock washers for reassembly.<br /> <br /> 7. If replacing the chain, remove the upper stud and remove the chain from the lower stud. Discard the connecting links.<br /> *''If the E.Q. chains are being reset due to a connecting link failure, it is recommended to also replace the stud where the connecting link failed.''<br /> *''It is recommended to replace the connecting links when replacing or resetting the E.Q. chains.''<br /> 8. If replacing a lower stud, remove the connecting link and disconnect the chain. Loosen the hex nut and remove the stud. Remove the hex nut from the old stud and reinstall it on the new stud. Reinstall the new stud so that it is flush with the bottom of the frame and the hole is aligned front-to-back with the extractor.<br /> <br /> 9. Attach the chains to the lower studs using the connecting links. Attach the upper studs to the chains using the connecting links, making sure the nut is threaded down near the connecting link and lay the chains in the frame. See Figure 3.<br /> *''Do not fully assemble the lower connecting links by bending the cotter pins as the connecting link may need to be removed later for stud adjustment.''[[File:IOP-400 BE-SL&amp;DS (10-23) EQ Chain Attached to Upper Stud.png|alt=BE-TS Chain Attached to Upper Stud|none|thumb|300x300px|FIGURE 3|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_EQ_Chain_Attached_to_Upper_Stud.png]]<br /> 10. If new E.Q. sprockets are to be installed, remove the clamp collars and old sprockets. Install the new sprockets and reinstall the clamp collars. DO NOT tighten the set screws at this point as adjustment/alignment may be required.<br /> *''Sprockets MUST be keyed in-line.''<br /> 11. Align the E.Q. shafts so that the keyways are in the 2 o'clock position (approximately 60 degrees from vertical). This will bring the sprocket set screws to the top of the sprocket when the inner carriage is lowered. See Figure 4.[[File:IOP-400 BE-SL&amp;DS (10-23) EQ Shafts aligned 60 Degrees from Vertical.png|alt=BE-TS EQ Shafts aligned 60 Degrees from Vertical|none|thumb|300x300px|FIGURE 4|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_EQ_Shafts_aligned_60_Degrees_from_Vertical.png]]12. Starting with the inside chain, route the chain over the sprocket directly above the lower stud and under the inside sprocket on the opposite shaft. Attach the upper stud to the top cross bar, making sure a new 3/4&quot; split -ring lock washer is installed between the cross bar and lower hex nut. Hand tighten the upper stud adjusting nut to remove slack from the chain. See Figure 5.<br /> <br /> 13. Route the outer chain over the sprocket, above the stud and under the sprocket on the opposite shaft. Attach the upper stud to the top cross bar, making sure a new, 3/4&quot; split-ring lock washer is installed between the cross bar and lower hex nut. Hand tighten the upper stud adjusting nut to remove slack from the chain. See Figure 5.<br /> *''It is recommended to begin at the operator end where room is limited allowing easier access at the opposite end to route the chain under the final sprocket.''<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Inside and Outside EQ Chains.png|alt=BE-TS Inside and Outside EQ Chains|none|thumb|499x499px|FIGURE 5|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Inside_and_Outside_EQ_Chains.png]]14. Repeat steps 11 through 13 for the opposite side of the extractor. It is likely that a large, standard screwdriver will be necessary to position the final chain over the sprocket. See Figure 6.[[File:IOP-400 BE-SL&amp;DS (10-23) Page 371 Image 0002.png|alt=It is likely that a large, standard screwdriver will be necessary to position the final chain over the sprocket.|none|thumb|300x300px|FIGURE 6|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Page_371_Image_0002.png]]15. Adjust the lower studs up or down as necessary to take the slack out of the chain between the lower studs and the sprockets by removing the connecting link from the stud and turning the stud. Tighten the hex nuts against the frame once the studs have been adjusted. Reattach the chain.<br /> *DO NOT allow the stud to twist when tightening the hex nuts.<br /> 16. Tighten the upper hex nut on the upper studs until there is approximately 1/4&quot; (7 mm) of total deflection in the middle of the upper, vertical chain sections. Tighten the lower hex nuts on the upper studs to lock the studs in place.<br /> *''Each section of chain between the sprockets should have approximately the same tension as the other on the same side. See Figure 5.''<br /> 17. Raise the inner frame and remove the adjustment stops from the four corners and lower the inside frame.<br /> <br /> 18. Verify equalization sprocket and stud alignment by using a 6&quot; scale. Measure the distance from the inside roller bed frame to the center of the equalization stud. Compare this distance with the measurements from the inside roller bed frame to the center-lines of the sprockets. Adjust the position of the sprocket as necessary to make the distances equal. This will ensure the chain and sprockets are in line with the stud. Repeat this process for the three remaining chains. See Figures 7 &amp; 8.<br /> <br /> 19. Raise and lower the inner frame several times and listen for any chain popping noises to confirm the sprockets are in line with the lower studs. If there is no popping noise, lower the inner frame all the way down.[[File:IOP-400 BE-SL&amp;DS (10-23) EQ Chain Verify equalization sprocket and stud alignment by using a 6in scale-Fig7.png|alt=BE-TS EQ Chain Procedure Figure 7 - Verify equalization sprocket and stud alignment by using a 6&quot; scale|none|thumb|300x300px|FIGURE 7|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_EQ_Chain_Verify_equalization_sprocket_and_stud_alignment_by_using_a_6in_scale-Fig7.png]][[File:IOP-400 BE-SL&amp;DS (10-23) EQ Chain Verify equalization sprocket and stud alignment by using a 6in scale-Fig8.png|alt=BE-TS EQ Chain Verify equalization sprocket and stud alignment by using a 6in scale - Fig 8|none|thumb|300x300px|FIGURE 8|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_EQ_Chain_Verify_equalization_sprocket_and_stud_alignment_by_using_a_6in_scale-Fig8.png]]20. Clean any existing, hardened Loctite from the sprockets, sprocket sets screws, clamp collars and clamp collar bolts.<br /> <br /> 21. Apply Loctite to and tighten the set screws on the sprockets. Slide the clamp collars against the outside sprocket, loctite and tighten the clamp collars.<br /> ==&lt;big&gt;80292001-i – Battery Extractor Service Stand Installation Instructions&lt;/big&gt;==<br /> ===&lt;big&gt;&lt;u&gt;Required Tools&lt;/u&gt;&lt;/big&gt;===<br /> None<br /> ===&lt;big&gt;&lt;u&gt;Notes&lt;/u&gt;&lt;/big&gt;===<br /> *''Refer to kit part # 80292001 or 80392001 for the complete bill of materials supplied.''<br /> *''Remove ALL batteries from extractor prior to installation / service.''<br /> *''Installation of service stands requires (2) persons plus a trained battery extractor operator to raise and lower the inner carriage. DO NOT attempt installation with less than (3) persons.''<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Single Level Service Stand Properly Installed.png|alt=Single Level Service Stand Properly Installed|none|thumb|368x368px|Single Level Service Stand Properly Installed|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Single_Level_Service_Stand_Properly_Installed.png]]<br /> ===&lt;big&gt;&lt;u&gt;IMPORTANT&lt;/u&gt;&lt;/big&gt;===<br /> *'''Read and understand the Safety and De-energization Procedure TP-606 before starting this procedure.'''<br /> *'''Read and understand these instructions completely before starting this procedure.'''<br /> ===&lt;big&gt;&lt;u&gt;Procedure&lt;/u&gt;&lt;/big&gt;===<br /> 1. Have a qualified operator raise the inner carriage of the extractor to the required height for installation. For single level applications, the required height will be approximately 25&quot; (64 cm) from the fully lowered position. For double, triple, and quad stack machines, the required height will be approximately 55&quot; (140 cm) from the fully lowered position.<br /> *On double, triple, and quad stack battery extractors, the operator either must remain on the operator platform during service or be provided an OSHA approved method of egress. This is not applicable to single level battery extractors as the operator platform height is fixed.<br /> 2. Install the stands by engaging the top of the stand into the inner carriage cutouts. Place the bottom channel of the stand over the tube of the outer frame. The top flanges of each stand are tapered to aid in proper alignment of the stand with the inner frame.<br /> <br /> See Figures 1 &amp; 2.[[File:IOP-400 BE-SL&amp;DS (10-23) engaging the top of the stand into the inner carriage cutout.png|alt=Properly seated in cutout|none|thumb|300x300px|FIGURE 1|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_engaging_the_top_of_the_stand_into_the_inner_carriage_cutout.png]][[File:IOP-400 BE-SL&amp;DS (10-23) Page 374 Image 0005.png|none|thumb|300x300px|FIGURE 2|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Page_374_Image_0005.png]]3. Once BOTH stands have been properly placed, SLOWLY lower the inner carriage while the stands are held in place.<br /> <br /> 4. Once the inner carriage is firmly seated on the service stands, verify the stands are securely installed. See Figure 3.[[File:IOP-400 BE-SL&amp;DS (10-23) Page 374 Image 0006.png|none|thumb|450x450px|FIGURE 3|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Page_374_Image_0006.png]]<br /> ==&lt;big&gt;Trouble Shooting Guide&lt;/big&gt;==<br /> {| class=&quot;wikitable&quot;<br /> !Problem Symptom<br /> !Probable Cause<br /> !Solution<br /> |-<br /> |Hydraulic power Unit does not operate.<br /> No electric to power unit motor.<br /> |1. No AC power to Unit.<br /> 2. Reset on magnetic motor starter tripped.<br /> <br /> 3. Gate switch not actuated.<br /> <br /> 4. Foot Pedal switch not engaged.<br /> <br /> 5. Emergency Stop switch is depressed.<br /> |1. Check fuses or breaker.<br /> 2. Check reset button.<br /> <br /> 3. Make sure safety gate is engaging switch.<br /> <br /> 4. Check foot pedal for obstruction.<br /> <br /> 5. Reset button using machine key.<br /> |-<br /> |Power unit runs but no pressure reading at gauge,<br /> also no functions move.<br /> |1. AC input is in reverse phase. Motor is running backwards.<br /> 2. Main system relief valve stuck open or defective.<br /> <br /> 3. Coupling between motor and pump loose.<br /> |1. Reverse any two of the three hot lines to unit.<br /> 2. Check relief valve cartridge for trash or debris.<br /> <br /> Replace as required.<br /> <br /> 3. Inspect coupling assy.<br /> |-<br /> |Magnetic starter contact chatters-at startup.<br /> Contact chatters while traveling.<br /> |1. 1 leg of 3 phase input power out.<br /> 2. Safety gate and/or gate switch out of adjustment.<br /> |1. Check fuse or circuit breaker at service panel.<br /> 2. Check and adjust gate or switch as required to<br /> <br /> ensure full engagement of plunger on gate<br /> <br /> switch and that the safety gate is not bouncing<br /> <br /> due to vibration.<br /> |-<br /> |No floor travel empty or loaded-all other functions work properly.<br /> |1. Extractor arm off center-left to right.<br /> 2. Proximity switch or sensing bracket out of target range.<br /> <br /> 3. Proximity switch defective or broken.<br /> <br /> 4. Bad solenoid coil on floor cutout valve.<br /> <br /> 5. Spool on floor cutout valve stuck open.<br /> |1. Center arm.<br /> 2. Adjust as needed to achieve 1/4” clearance.<br /> <br /> 3. Check switch and replace.<br /> <br /> 4. Check solenoid and replace if needed.<br /> <br /> 5. Remove and clean spool cartridge or replace.<br /> |-<br /> |Floor travel moves but is sluggish<br /> and stalls with a load at certain points.<br /> |1. Uneven floor conditions. High/low spots.<br /> 2. Excessive tire wear.<br /> <br /> 3. Wheel shaft-to-motor shaft coupling on drive wheel assembly loose or broken.<br /> <br /> 4. Debris lodged under battery extractor.<br /> |1. Check flatness of floor. Check guidance track for scraping of guide arm on top of angle.<br /> 2. Measure under clearance of battery extractor. Should be no less than 5/8” replace poly wheels as needed.<br /> <br /> 3. Inspect drive assembly while under load to see if shafts and couplings are moving in unison. Repair as needed.<br /> <br /> 4. Inspect under unit and remove debris.<br /> |-<br /> |Inner carriage bounces while lifting under load,<br /> but not when empty.<br /> |1. Down speed adjustment valve open too far.<br /> |1. Adjust as needed to eliminate carriage bounce.<br /> |-<br /> |Inner carriage does not lift evenly.<br /> Four corners do not land evenly against outer frame tube.<br /> |1. Equalization chains are out of adjustment.<br /> 2. Excessive chain or sprocket wear.<br /> <br /> 3. Equalization chains are out of synchronization. Possibly may have jumped a sprocket tooth.<br /> <br /> 4. Broken bearing housing on mounted shaft.<br /> <br /> 5. Lift cylinder roping chains out of adjustment.<br /> |1. Readjust with the top stud until equal tension is achieved.<br /> 2. Replace as needed.<br /> <br /> 3. Evaluate and resynchronize as required.<br /> <br /> 4. Inspect and replace.<br /> <br /> 5. Readjust as needed to equal tension on all four cylinders in full down position.<br /> |}<br /> =&lt;big&gt;Aftermarket Support&lt;/big&gt;=<br /> [https://na.bhs1.com/blog/post/tt-922-technical-support Click here] for details on BHS' Aftermarket Support.<br /> =&lt;big&gt;Statement of Warranty&lt;/big&gt;=<br /> [https://store.bhs1.com/warranty Click here] for details on BHS' Statement of Warranty.</div>

Kperrier https://tech.bhs1.com/index.php?title=File:BE-TS_Top_Module_Junction_Box.png&diff=7671 2024-04-02T17:13:38Z

<p>Kperrier: </p> <hr /> <div>BE-TS Top Module Junction Box</div>

Kperrier https://tech.bhs1.com/index.php?title=(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)&diff=7670 2024-04-02T17:11:06Z

<p>Kperrier: /* 120V Receptacle */</p> <hr /> <div>'''Looking for a specific replacement part?''' Ctrl-F (or Command-F for Mac users) brings up your browsers search panel and can search any text on the entire web page. Find parts by searching a part # or part description.<br /> <br /> '''Register your equipment with [https://na.bhs1.com/media-library/bhs-optima/ BHS Optima], BHS's free app.'''<br /> <br /> '''California Residents''': WARNING: This product contains chemicals known to the State of California to cause cancer and/or reproductive harm, and birth defects or other reproductive harm. [https://na.bhs1.com/about-bhs/compliance-statement-for-california-proposition-65/ Learn more here.]<br /> =&lt;big&gt;Preface&lt;/big&gt;=<br /> =&lt;big&gt;TP-606 – Safety &amp; De-Energization Procedures&lt;/big&gt;=<br /> ==&lt;big&gt;General Safety&lt;/big&gt;==<br /> {|<br /> |[[File:Read Before Operating Notice.png|alt=Read Before Operating|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:Read_Before_Operating_Notice.png]]<br /> |<br /> *Read and understand all instructions and warnings before using or servicing this equipment.<br /> *Keep these instructions for future reference.<br /> |}<br /> *Battery Extractor (BE) units shall only be operated by suitable persons of at least 18 years of age, who have been trained in the proper and safe operation of the BE and expressly certified/charged, in writing, by the user or their representative.<br /> *Only one person is permitted to travel on the BE at any time.<br /> *BE units shall only be used indoors in an industrial setting on a hard, nonslip, and level floor without defects including but not limited to holes, gouges, cracks, drains or obstacles comprised of concrete or other suitable industrial material meeting the minimum requirements specified by BHS as well as any local requirements.<br /> *A licensed structural engineer should be consulted prior to installing a BE on any building level other than the ground floor.<br /> *BE units are not designed to be shipped or transported after initial delivery.<br /> *Failure to follow these instructions and warnings may result in property damage, personal injury or death.<br /> ===&lt;big&gt;&lt;u&gt;Work Area&lt;/u&gt;&lt;/big&gt;===<br /> *Keep work area clean and well lit. Cluttered work areas and poor lighting can lead to accidents.<br /> *Clean up/contain any fluid spills immediately to prevent slips or falls.<br /> *Be aware of potential hazards when performing any service or maintenance to the unit.<br /> ===&lt;big&gt;&lt;u&gt;Service &amp; Maintenance&lt;/u&gt;&lt;/big&gt;===<br /> Service personnel shall wear Personal Protective Equipment (PPE) appropriate for the task being performed.<br /> {|<br /> |[[File:Electrical Hazard Warning.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Electrical_Hazard_Warning.png]]<br /> [[File:Danger Warning.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Danger_Warning.png|alt=DANGER]]<br /> |<br /> ===&lt;big&gt;&lt;u&gt;Lockout/Tagout&lt;/u&gt;&lt;/big&gt;===<br /> '''Lockout/tagout the BE per your corporate policy, if damaged or not functioning properly. Lockout/tagout and de-energize all systems prior to performing any maintenance or service to unit.'''<br /> |}<br /> {|<br /> |[[File:Warning-Battery-Explosion.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Warning-Battery-Explosion.png]]<br /> [[File:Danger Warning.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Danger_Warning.png|alt=DANGER]]<br /> |<br /> ===&lt;big&gt;&lt;u&gt;Lead-Acid Battery Explosion Hazard&lt;/u&gt;&lt;/big&gt;===<br /> '''DO NOT allow open flames or sparks of any kind near a battery. Highly explosive gas is generated when charging a battery that can remain in battery cells for extended periods of time after charging is complete.'''<br /> *Always wear appropriate PPE including rubber apron, gloves, boots and full face shield when performing service or maintenance to any lead-acid batteries.<br /> *DO NOT place metal or other conductive objects on top of battery. Arcing may occur causing damage to the battery and/or serious personal injury or death.<br /> *Use only chargers matching the voltage and amperage of the battery being charged. Overcharging a battery can cause damage to the battery, charger and/or serious personal injury or death.<br /> *Turn off charger before disconnecting battery from charger. Arcing between battery and charger connectors can cause damage to the connectors and/or serious personal injury or death.<br /> |}<br /> {|<br /> |[[File:Warning-Hydrualic-Hazard.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Warning-Hydrualic-Hazard.png]]<br /> [[File:Warning.png|alt=WARNING|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Warning.png]]<br /> |<br /> ===&lt;big&gt;&lt;u&gt;Hydraulic Hazards&lt;/u&gt;&lt;/big&gt;===<br /> '''AVOID HIGH PRESSURE FLUIDS-Escaping fluid under pressure can penetrate the skin causing serious injury. Relieve pressure before disconnecting hydraulic lines. Tighten all connections before applying pressure. Keep hands and body away from pin holes which eject fluids under high pressure. Use a piece of cardboard or paper to search for leaks. DO NOT use your hand.'''<br /> <br /> '''Any fluid injected into the skin under high pressure should be considered a serious medical emergency despite an initial normal appearance of the skin. There will be a delayed onset of pain, and serious tissue damage may occur. Medical attention should be sought immediately.'''<br /> |}<br /> {|<br /> ![[File:No Pacemakers Notice.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:No_Pacemakers_Notice.png]][[File:Strong Magnet Field Hazard Warning.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Strong_Magnet_Field_Hazard_Warning.png]]<br /> [[File:Warning.png|alt=WARNING|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Warning.png]]<br /> |<br /> ===&lt;big&gt;&lt;u&gt;Electromagnet Hazard&lt;/u&gt;&lt;/big&gt;===<br /> '''Units equipped with magnetic extraction generate strong magnetic fields. Persons with pacemakers &lt;u&gt;SHOULD&lt;/u&gt;''' &lt;u&gt;'''NOT'''&lt;/u&gt; '''operate or be in close proximity to equipment during operation.'''<br /> <br /> '''Failure to comply with this direction''' '''could result in serious personal injury or death.'''<br /> |}<br /> ===&lt;big&gt;&lt;u&gt;Operational Safety&lt;/u&gt;&lt;/big&gt;===<br /> *Only personnel trained in the proper and safe operation of BE units may operate or service the BE.<br /> *Operators shall wear appropriate PPE suitable for working with industrial lead-acid batteries while operating the BE ''(See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Lead-Acid_Battery_Explosion_Hazard Lead-Acid Battery Explosion Hazard] section).''<br /> *All data plates, warning labels, placards, etc. shall be in place and legible at all times. Contact BHS for re-placement data plates, warning labels, placards or instructions.<br /> *All users and service personnel shall be familiar with the meaning and risks associated with all data plates, warning labels, etc.<br /> *All operators and service personnel shall be aware of potential crush and shear points while operating or servicing the BE.<br /> *Keep hands and arms inside the operator compartment while operating the BE.<br /> *Remove BE from service if damaged, defective, or operating improperly (or becomes such while operating) until repairs can be made to correct any problem(s).<br /> *All operators shall be aware of the location of the end stops in the travel path to prevent driving the BE into the end stops.<br /> ===&lt;u&gt;&lt;big&gt;Do's and Don'ts&lt;/big&gt;&lt;/u&gt;===<br /> *'''DO NOT''' exceed the maximum capacity of the BE.<br /> *'''DO NOT''' modify or fit the BE with attachments without prior, written approval from BHS.<br /> *'''DO NOT''' perform any maintenance or service to the BE with a battery loaded on the BE.<br /> *'''DO NOT''' allow anyone to ride in or on the BE.<br /> *'''DO NOT''' operate the BE with any guard or cover removed unless required for maintenance or repair.<br /> *Disconnect the BE from all power sources before attempting to perform service or maintenance to the unit.<br /> *'''DO NOT''' drive the BE into the end stops.<br /> *'''DO NOT''' operate the BE if disengaged from the guidance track.<br /> *'''DO NOT''' allow a battery to exit the BE when a lift truck or battery stand is not present to accept the battery.<br /> *'''DO NOT''' rotate the arm onto a battery such that any part of the extractor arm, vacuum cup or magnet contacts the top of the battery.<br /> *'''DO NOT''' allow anyone to enter the area under the carriage without the service stands properly installed.<br /> *'''DO NOT''' use the BE in a manner for which it is not intended. Some examples of prohibited use are but not limited to:<br /> **To transport people<br /> **As a vehicle jack<br /> **To lift loads greater than its rated load capacity<br /> **Where unintentional movement may exist<br /> **Having direct contact with foodstuffs<br /> **In a potentially explosive atmosphere<br /> ==&lt;big&gt;De-Energization&lt;/big&gt;==<br /> 1. Fully lower the BE roller bed or position the roller bed on service stands if service requires the bed be raised. See Figures 1 &amp; 2.<br /> {|<br /> |[[File:WARNING-warn.png|alt=WARNING|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:WARNING-warn.png]]<br /> !Failure to properly support the roller bed when performing service under the BE could result in injury from the roller bed lowering unexpectedly.<br /> |}[[File:IOP-400 BE-SL&amp;DS (10-23) Fully Lower BE Roller Bed.png|alt=Fully lowered BE roller bed|none|thumb|FIGURE 1|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Fully_Lower_BE_Roller_Bed.png]][[File:IOP-400 BE-SL&amp;DS (10-23) BE Roller Bed on Service Stands .png|alt=Raised BE roller bed positioned on service stands|none|thumb|FIGURE 2|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_BE_Roller_Bed_on_Service_Stands_.png]]2. Turn key on dashboard to the “OFF” position. See Figure 3.[[File:IOP-400 BE-SL&amp;DS (10-23) De-Energization Figure 3.png|alt=Key on BE dashboard turned to the “OFF” position.|none|thumb|FIGURE 3|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_De-Energization_Figure_3.png]]3. Disconnect power to the extractor or shut off the electrical branch circuit breaker.<br /> {|<br /> |[[File:Danger Warning.png|alt=DANGER|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Danger_Warning.png]]<br /> |'''Failure to disconnect electrical power to the BE could result in electrical shock. Serious personal injury or death will occur.'''<br /> |}4. Actuate all hydraulic levers in both directions to re-lease any stored hydraulic pressure. See Figure 4.<br /> {|<br /> |[[File:WARNING-warn.png|alt=WARNING|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:WARNING-warn.png]]<br /> |'''Failure to release any stored hydraulic pres-sure could result in injury from:'''<br /> *'''Escaping hydraulic fluid under high pressure (see ''[https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Hydraulic_Hazards HYDRAULIC HAZARDS]'' in the ''[https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#General_Safety GENERAL SAFETY]'' section).'''<br /> *'''Unexpected movement of hydraulic components.'''<br /> |}[[File:IOP-400 BE-SL&amp;DS (10-23) Actuate all Hydraulic Levers in Both Directions.png|alt=Actuate all hydraulic levers in both directions to release any stored hydraulic pressure.|none|thumb|FIGURE 4|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Actuate_all_Hydraulic_Levers_in_Both_Directions.png]]<br /> ==&lt;big&gt;Labels &amp; Placards&lt;/big&gt;==<br /> '''Operators should be familiar with the meaning of the following labels and placards found on the BE to ensure proper and safe operation.'''<br /> {| class=&quot;wikitable&quot;<br /> |-<br /> ![[File:Read Before Operating Notice.png|alt=Read Before Operating|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Read_Before_Operating_Notice.png]]<br /> |'''Read and understand instruction manual prior to use.'''<br /> |-<br /> ![[File:Lockout-Before-Servicing-Notice.png|alt=Lockout Before Servicing Unit|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Lockout-Before-Servicing-Notice.png]]<br /> |'''Lockout before servicing.'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Extractor Arm Positioning Arrows.png|alt=BE-SL &amp; BE-DS Extractor Arm Positioning Arrows|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Extractor_Arm_Positioning_Arrows.png]]<br /> |'''Extractor arm positioning arrows'''<br /> |-<br /> ![[File:Do Not Operate Without Guards or Covers Notice.png|alt=DO NOT Operate Without Guards or Covers Notice|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Do_Not_Operate_Without_Guards_or_Covers_Notice.png]]<br /> |'''DO NOT operate with guards or covers removed'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) No Riders Allowed.png|alt=No riders allowed|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_No_Riders_Allowed.png]]<br /> |'''NO riders allowed.'''<br /> |-<br /> ![[File:No Pacemakers Notice.png|alt=DO NOT operate by or in close proximity to people with pacemakers.|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:No_Pacemakers_Notice.png]]<br /> |'''DO NOT operate by or in close proximity to people with pacemakers.'''<br /> |-<br /> ![[File:Strong Magnet Field Hazard Warning.png|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Strong_Magnet_Field_Hazard_Warning.png]]<br /> [[File:Warning.png|alt=WARNING|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Warning.png]]<br /> |'''Strong Magnet Field Hazard'''<br /> *Attraction between magnet and metallic objects can crush.<br /> *Keep unsecured metallic objects away from magnet.<br /> *De-energize and lockout/tagout before servicing.<br /> |-<br /> ![[File:Chain Entanglement Hazard Warning.png|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Chain_Entanglement_Hazard_Warning.png]]<br /> [[File:Warning.png|alt=WARNING|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Warning.png]]<br /> |'''Chain Entanglement Hazard'''<br /> *Moving chains and sprockets can crush and cut.<br /> *Keep hands and fingers clear. Do not operate with guards removed.<br /> *De-energize and lockout/tagout before servicing.<br /> |-<br /> ![[File:Electrical Hazard Warning.png|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Electrical_Hazard_Warning.png]]<br /> [[File:Danger Warning.png|alt=DANGER|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Danger_Warning.png]]<br /> |'''Electrical Hazard'''<br /> *Energized components can cause electrical shock.<br /> *De-energize and lockout/tagout before servicing.<br /> |-<br /> ![[File:BE-SL and BE-DS Power Off-On.png|alt=BE-SL and BE-DS Power Off-On|frameless|180x180px|link=https://tech.bhs1.com/index.php/File:BE-SL_and_BE-DS_Power_Off-On.png]]<br /> |'''Power Off/On'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Horn Control.png|alt=BE-SL and BE-DS Horn Control |frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Horn_Control.png]]<br /> |'''Horn (If equipped)'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Vacuum Control.png|alt=BE-SL and BE-DS Vacuum Control |frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Vacuum_Control.png]]<br /> |'''Vacuum Off/On (If equipped)'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Magnet Extraction.png|alt=BE-SL and BE-DS Magnet Off/On|frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Magnet_Extraction.png]]<br /> |'''Magnet Off/On (If equipped)'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Powered Roller Cut Off Override.png|alt=BE-SL and BE-DS Powered Roller Cut Off Override|frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Powered_Roller_Cut_Off_Override.png]]<br /> |'''Powered Roller Cutout Override (If equipped)'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Rack-Level-Assist.png|alt=BE-SL and BE-DS Rack Level Assist |frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Rack-Level-Assist.png]]<br /> |'''Rack Level Assist Indicator (If equipped)'''<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> ! rowspan=&quot;3&quot; |[[File:IOP-400_BE-SL&amp;DS_(10-23)_Power_Rollers_and_Arm_Travel.png.png|alt=BE-SL &amp; DS Powered Roller and Arm Travel Controls|frameless|504x504px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Power_Rollers_and_Arm_Travel.png.png]]<br /> |'''Far Power Rollers'''<br /> |-<br /> |'''Arm Travel'''<br /> |-<br /> |'''Near Power Rollers'''<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> |+''BE-SL &amp; DS UNITS ONLY''<br /> ! colspan=&quot;3&quot; |[[File:IOP-400 BE-SL&amp;DS (10-23) BE-SL&amp;DS Units Platform Controls.png|alt=BE-SL &amp; DS Specific Controls|frameless|460x460px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_BE-SL&amp;DS_Units_Platform_Controls.png]]<br /> |-<br /> |Drive Forward/Reverse<br /> |Platform Raise/Lower<br /> |Arm Rotation Near/Far<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> |+''BE-TS &amp; QS UNITS ONLY''<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) BE-TS &amp; BE-QS Platform Raise and Lower Controls.png|alt=BE-TS &amp; BE-QS Platform Raise and Lower Controls|frameless|240x240px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_BE-TS_&amp;_BE-QS_Platform_Raise_and_Lower_Controls.png]]<br /> ! colspan=&quot;2&quot; |[[File:IOP-400 BE-SL&amp;DS (10-23)BE-TS &amp; BE-QS Specific Controls.png|alt=BE-TS &amp; BE-QS Specific-Controls|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)BE-TS_&amp;_BE-QS_Specific_Controls.png]]<br /> |-<br /> |Platform Raise/Lower<br /> |Drive Foward/Reverse<br /> |Arm Rotation Near/Far<br /> |}<br /> =&lt;big&gt;General Information&lt;/big&gt;=<br /> ==&lt;big&gt;Specification Data&lt;/big&gt;==<br /> [[File:BE-TS Specification Data.png|alt=IOP-401 BE-TS (10-23) Specification Data|frameless|600x600px]]<br /> {| class=&quot;wikitable&quot;<br /> | colspan=&quot;2&quot; |<br /> !BE-24-2-TS<br /> !BE-36-2-TS<br /> !BE-42-2-TS<br /> |-<br /> !A<br /> |Overall Length<br /> |156.5&quot;<br /> |180.5&quot;<br /> |192.5&quot;<br /> |-<br /> !B<br /> |Overall Width<br /> |72&quot;<br /> |72&quot;<br /> |72&quot;<br /> |-<br /> !C<br /> |Overall Height (Lowered)<br /> |158.188&quot;<br /> |158.188&quot;<br /> |160.688&quot;<br /> |-<br /> !<br /> |Overall Height (Raised w/ Overhead Guard)<br /> |182.375&quot;<br /> |182.375&quot;<br /> |182.375&quot;<br /> |-<br /> !<br /> |Overall Height (Raised w/ Strobe &amp; Alarm)<br /> |191.75&quot;<br /> |191.75&quot;<br /> |191.75&quot;<br /> |-<br /> !D<br /> |Wheel Base<br /> |98&quot;<br /> |122&quot;<br /> |134&quot;<br /> |-<br /> !E<br /> |Drive Wheel Center line<br /> |51&quot;<br /> |51&quot;<br /> |51&quot;<br /> |-<br /> !F<br /> |Battery Compartment Width<br /> |24&quot;<br /> |36&quot;<br /> |42&quot;<br /> |-<br /> !G<br /> |Ground Clearance<br /> |.625&quot;<br /> |.625&quot;<br /> |.625&quot;<br /> |-<br /> !H<br /> |Minimum Roller Height<br /> |6.5&quot;<br /> |6.5&quot;<br /> |6.5&quot;<br /> |-<br /> !I<br /> |Maximum Roller Height<br /> |96&quot;<br /> |96&quot;<br /> |96&quot;<br /> |-<br /> !J<br /> |Operator Platform Height (Lowered/Raised)<br /> |11&quot; / 103&quot;<br /> |11&quot; / 103&quot;<br /> |11&quot; / 103&quot;<br /> |}<br /> <br /> === UNITS WITH 10 HP POWER UNIT USED PRIOR TO DECEMBER, 2014 ===<br /> {| class=&quot;wikitable&quot;<br /> !<br /> !BE-24-2-TS<br /> !BE-36-2-TS<br /> !BE-42-2-TS<br /> |-<br /> |Travel Speed<br /> |0 to 190 ft/min / 0 to 0.97 m/s<br /> |0 to 190 ft/min / 0 to 0.97 m/s<br /> |0 to 190 ft/min / 0 to 0.97 m/s<br /> |-<br /> |Raise - Lower Speed<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |-<br /> |Powered Roller Speed<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |-<br /> |Arm Traverse Speed<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |-<br /> |Arm Rotation Time<br /> |6 s to 8 s<br /> |6 s to 8 s<br /> |6 s to 8 s<br /> |-<br /> |Draw Bar Pull / Vacuum<br /> <br /> (12&quot; / 305 mm Round Cup)<br /> |1,000 lb / 454 kg<br /> |1,000 lb / 454 kg<br /> |1,000 lb / 454 kg<br /> |-<br /> |Draw Bar Pull Magnet*<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |-<br /> |Vacuum Attach Time<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |-<br /> |Vacuum Release Time<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |-<br /> |Input Voltage<br /> |480 V / 3 ph / 60Hz<br /> |480 V / 3 ph / 60Hz<br /> |480 V / 3 ph / 60Hz<br /> |-<br /> |AC Current Draw<br /> |16.5 A<br /> |16.5 A<br /> |16.5 A<br /> |-<br /> |Control Circuit Voltage<br /> |120 V ac<br /> |120 V ac<br /> |120 V ac<br /> |-<br /> |Hydraulic Power Unit<br /> |10 hp / 7.46 kW<br /> |10 hp / 7.46 kW<br /> |10 hp / 7.46 kW<br /> |-<br /> |Hydraulic Pump<br /> |16 gal/min / 61 L/min<br /> |16 gal/min / 61 L/min<br /> |16 gal/min / 61 L/min<br /> |-<br /> |Power Unit<br /> |Hydraulic, Variable Displacement<br /> |Hydraulic, Variable Displacement<br /> |Hydraulic, Variable Displacement<br /> |-<br /> |Operating Pressure<br /> |1,500 psi / 103 bar<br /> |1,500 psi / 103 bar<br /> |1,500 psi / 103 bar<br /> |-<br /> |Vacuum Pump<br /> |1/3 hp / 0.25 kW<br /> |1/3 hp / 0.25 kW<br /> |1/3 hp / 0.25 kW<br /> |-<br /> |Vacuum<br /> |21&quot; Hg / 711 mbar<br /> |21&quot; Hg / 711 mbar<br /> |21&quot; Hg / 711 mbar<br /> |-<br /> |Full Load Capacity<br /> |10,000 lb / 4535 kg<br /> |10,000 lb / 4535 kg<br /> |10,000 lb / 4535 kg<br /> |-<br /> |Weight (Empty)<br /> |8,000 lb / 3629 kg<br /> |8,300 lb / 3765 kg<br /> |8,600 lb / 3901 kg<br /> |-<br /> |Total Compartment Rollers / Powered<br /> |11/5<br /> |11/5<br /> |11/5<br /> |-<br /> |Guide Track<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |-<br /> |Overall Dimensions (L x W x H)<br /> |156.5&quot; x 72&quot; x 158.188&quot;<br /> <br /> 3975 mm x 1829 mm x 4018 mm<br /> |180.5&quot; x 72&quot; x 158.188&quot;<br /> <br /> 4585 mm x 1829 mm x 4018 mm<br /> |192.5&quot; x 72&quot; x 160.688&quot;<br /> <br /> 4890 mm x 1829 mm x 4081 mm<br /> |-<br /> |Vacuum Arm Reach<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |-<br /> |Vacuum Arm Reach (Hydraulic Extension)<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |-<br /> |Magnet Arm Reach (Hydraulic Extension) Truck Side<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |-<br /> |Wheel Base<br /> |98&quot; / 2489 mm<br /> |122&quot; / 3099 mm<br /> |134&quot; / 3404 mm<br /> |-<br /> |Drive Wheel Center Line<br /> |51&quot; / 1295 mm<br /> |51&quot; / 1295 mm<br /> |51&quot; / 1295 mm<br /> |-<br /> |Battery Compartment Width<br /> |24&quot; / 610 mm<br /> |36&quot; / 915 mm<br /> |42&quot; / 1067 mm<br /> |-<br /> |Maximum Battery Dimensions<br /> <br /> (L x W x H)<br /> |48&quot; x 23&quot; x 34&quot;<br /> <br /> 1219 mm x 584 mm x 864 mm<br /> |48&quot; x 35&quot; x 34&quot;<br /> <br /> 1219 mm x 889 mm x 864 mm<br /> |48&quot; x 41&quot; x 34&quot;<br /> <br /> 1219 mm x 1041 mm x 864 mm<br /> |-<br /> |Minimum Battery Width<br /> <br /> (with vacuum / magnet)<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |-<br /> |Minimum Battery Height<br /> |17.75&quot; / 451 mm<br /> |17.75&quot; / 451 mm<br /> |17.75&quot; / 451 mm<br /> |-<br /> |Ground Clearance<br /> |0.63&quot; / 16 mm<br /> |0.63&quot; / 16 mm<br /> |0.63&quot; / 16 mm<br /> |-<br /> |Roller Height<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |-<br /> ! colspan=&quot;4&quot; |NOTES<br /> |-<br /> | colspan=&quot;4&quot; |''Specifications may vary ± 5% because of temperature, floor considerations, and operator efficiency. Values represented under normal operating conditions.''<br /> |-<br /> | colspan=&quot;4&quot; |''* Varies with battery case thickness and condition.''<br /> |}<br /> <br /> === UNITS WITH 20 HP POWER UNIT USED DECEMBER, 2014 TO PRESENT ===<br /> {| class=&quot;wikitable&quot;<br /> !<br /> !BE-24-2-TS<br /> !BE-36-2-TS<br /> !BE-42-2-TS<br /> |-<br /> |Travel Speed<br /> |0 to 240 ft/min / 0 to 1.22 m/s<br /> |0 to 240 ft/min / 0 to 1.22 m/s<br /> |0 to 240 ft/min / 0 to 1.22 m/s<br /> |-<br /> |Raise - Lower Speed<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |-<br /> |Powered Roller Speed<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |-<br /> |Arm Traverse Speed<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |-<br /> |Arm Rotation Time<br /> |6 s to 8 s<br /> |6 s to 8 s<br /> |6 s to 8 s<br /> |-<br /> |Draw Bar Pull / Vacuum<br /> <br /> (12&quot; / 305 mm Round Cup)<br /> |1,000 lb / 454 kg<br /> |1,000 lb / 454 kg<br /> |1,000 lb / 454 kg<br /> |-<br /> |Draw Bar Pull Magnet*<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |-<br /> |Vacuum Attach Time<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |-<br /> |Vacuum Release Time<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |-<br /> |Input Voltage<br /> |480 V / 3 ph / 60Hz<br /> |480 V / 3 ph / 60Hz<br /> |480 V / 3 ph / 60Hz<br /> |-<br /> |AC Current Draw<br /> |35 A<br /> |35 A<br /> |35 A<br /> |-<br /> |AC Current Draw w/ Electric Drive Option<br /> |42 A<br /> |42 A<br /> |42 A<br /> |-<br /> |Control Circuit Voltage<br /> |120 V ac<br /> |120 V ac<br /> |120 V ac<br /> |-<br /> |Hydraulic Power Unit<br /> |20 hp / 14.9 kW<br /> |20 hp / 14.9 kW<br /> |20 hp / 14.9 kW<br /> |-<br /> |Hydraulic Power Unit w/ Electric Drive Option<br /> |25 hp / 18.7 kW<br /> |25 hp / 18.7 kW<br /> |25 hp / 18.7 kW<br /> |-<br /> |Hydraulic Pump<br /> |22 gal/min / 83 L/min<br /> |22 gal/min / 83 L/min<br /> |22 gal/min / 83 L/min<br /> |-<br /> |Power Unit<br /> |Hydraulic, Variable Displacement<br /> |Hydraulic, Variable Displacement<br /> |Hydraulic, Variable Displacement<br /> |-<br /> |Operating Pressure<br /> |1,500 psi / 103 bar<br /> |1,500 psi / 103 bar<br /> |1,500 psi / 103 bar<br /> |-<br /> |Vacuum Pump<br /> |1/3 hp / 0.25 kW<br /> |1/3 hp / 0.25 kW<br /> |1/3 hp / 0.25 kW<br /> |-<br /> |Vacuum<br /> |21&quot; Hg / 711 mbar<br /> |21&quot; Hg / 711 mbar<br /> |21&quot; Hg / 711 mbar<br /> |-<br /> |Full Load Capacity<br /> |10,000 lb / 4535 kg<br /> |10,000 lb / 4535 kg<br /> |10,000 lb / 4535 kg<br /> |-<br /> |Weight (Empty)<br /> |8,000 lb / 3629 kg<br /> |8,300 lb / 3765 kg<br /> |8,600 lb / 3901 kg<br /> |-<br /> |Total Compartment Rollers / Powered<br /> |11/5<br /> |11/5<br /> |11/5<br /> |-<br /> |Guide Track<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |-<br /> |Overall Dimensions (L x W x H)<br /> |156.5&quot; x 72&quot; x 158.188&quot;<br /> <br /> 3975 mm x 1829 mm x 4018 mm<br /> |180.5&quot; x 72&quot; x 158.188&quot;<br /> <br /> 4585 mm x 1829 mm x 4018 mm<br /> |192.5&quot; x 72&quot; x 160.688&quot;<br /> <br /> 4890 mm x 1829 mm x 4081 mm<br /> |-<br /> |Vacuum Arm Reach<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |-<br /> |Vacuum Arm Reach (Hydraulic Extension)<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |-<br /> |Magnet Arm Reach (Hydraulic Extension) Truck Side<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |-<br /> |Wheel Base<br /> |98&quot; / 2489 mm<br /> |122&quot; / 3099 mm<br /> |134&quot; / 3404 mm<br /> |-<br /> |Drive Wheel Center Line<br /> |51&quot; / 1295 mm<br /> |51&quot; / 1295 mm<br /> |51&quot; / 1295 mm<br /> |-<br /> |Battery Compartment Width<br /> |24&quot; / 610 mm<br /> |36&quot; / 915 mm<br /> |42&quot; / 1067 mm<br /> |-<br /> |Maximum Battery Dimensions<br /> <br /> (L x W x H)<br /> |48&quot; x 23&quot; x 34&quot;<br /> <br /> 1219 mm x 584 mm x 864 mm<br /> |48&quot; x 35&quot; x 34&quot;<br /> <br /> 1219 mm x 889 mm x 864 mm<br /> |48&quot; x 41&quot; x 34&quot;<br /> <br /> 1219 mm x 1041 mm x 864 mm<br /> |-<br /> |Minimum Battery Width<br /> <br /> (with vacuum / magnet)<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |-<br /> |Minimum Battery Height<br /> |17.75&quot; / 451 mm<br /> |17.75&quot; / 451 mm<br /> |17.75&quot; / 451 mm<br /> |-<br /> |Ground Clearance<br /> |0.63&quot; / 16 mm<br /> |0.63&quot; / 16 mm<br /> |0.63&quot; / 16 mm<br /> |-<br /> |Roller Height<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |-<br /> ! colspan=&quot;4&quot; |NOTES<br /> |-<br /> | colspan=&quot;4&quot; |''Specifications may vary ± 5% because of temperature, floor considerations, and operator efficiency. Values represented under normal operating conditions.''<br /> |-<br /> | colspan=&quot;4&quot; |''* Varies with battery case thickness and condition.''<br /> |}<br /> ==&lt;big&gt;Pre-Installation Check&lt;/big&gt;==<br /> ===&lt;big&gt;&lt;u&gt;Floor Conditions&lt;/u&gt;&lt;/big&gt;===<br /> The floor is the single most critical area of the battery room.  A bad floor can cause significant issues with the installation as well as downtime and maintenance problems with the extractor.  The floor should be verified as to its minimum thickness and strength with user.  As noted on the drawing, the specific requirement of flatness for your particular type of system is listed. Below is a chart stating floor requirements.  If possible, especially on double stack and higher systems, a digital level should be used to shoot the grade for compliance with the specification.  The floor should also be inspected for severe cracks or excessively wide expansion joints in the travel path of the machine.  If floor drains are present, they must not have a grade to the opening that encroaches into the travel path. <br /> <br /> F-min is a rating method used to evaluate the flatness and levelness of a floor designated as &quot;defined travel path&quot;.  For example, an F-min rating of 60 means that there is no more than .129&quot; of variation in the transverse axis (wheels left to right) and .287&quot; variation in the longitudinal axis (front to back) on the equipment.<br /> <br /> To avoid potential damage to drive wheel assemblies, guide track, structural components, guide rollers  and issues with the inner frame equalization the &quot;defined travel path&quot; of the Battery Extractor should meet or exceed the recommended F-min specification. See chart below for the model specifications.<br /> {| class=&quot;wikitable&quot;<br /> !Model<br /> !F-Min<br /> !+/- Longitudinal<br /> !+/- Transverse<br /> !Slope Defect<br /> |-<br /> |SL, DS<br /> |40<br /> |.287&quot;<br /> |.192&quot;<br /> |.096&quot;<br /> |-<br /> |TS<br /> |60<br /> |.186&quot;<br /> |.129&quot;<br /> |.066&quot;<br /> |-<br /> |QS<br /> |85<br /> |.131&quot;<br /> |.091&quot;<br /> |.047&quot;<br /> |}[[File:IOP-400 BE-SL&amp;DS (10-23) Floor Conditions Pre-Installation Check.png|alt=BE-TS Floor Conditions Pre-Installation Check|frameless|500x500px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Floor_Conditions_Pre-Installation_Check.png]]<br /> ==&lt;big&gt;Operating Controls &amp; Instructions&lt;/big&gt;==<br /> <br /> === &lt;big&gt;&lt;u&gt;Operator Console&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Operator Console.png|alt=BE-TS Operator Console|frameless|1080x1080px]]<br /> <br /> '''''NOTE:''' Safety devices for the machine and the machine operating area SHALL NOT be rendered inoperable or misused.'' <br /> <br /> ''Typical BE-TS operator console shown above. Position of optional controls may vary from that shown depending on age of unit and/or combination of optional controls present.''<br /> <br /> ''HMI display standard on units shipped after February, 2020 for Industrial Internet of Things (IIoT) package.''<br /> <br /> ==== &lt;u&gt;&lt;big&gt;Safety Features&lt;/big&gt;&lt;/u&gt; ====<br /> &lt;u&gt;Key Switch&lt;/u&gt; – Located on the dash (see above).  Primary on/off switch to prevent unauthorized personnel from operating the BE.<br /> <br /> &lt;u&gt;Emergency Stop&lt;/u&gt; – Located on the dash (see above). Will stop all functions immediately, locking all hydraulics in place. To use, press down on the red button. The machine key must be used to reset the emergency stop.<br /> <br /> &lt;u&gt;Foot Switch&lt;/u&gt; – Must be depressed to operate the BE.  Stepping off the foot switch will stop all functions immediately, locking all hydraulics in place.  To resume use, depress the foot switch.<br /> <br /> &lt;u&gt;Gate Switch&lt;/u&gt; – The gate must be fully closed for the BE to operate.<br /> <br /> &lt;u&gt;Extractor Arm Switch&lt;/u&gt; – Does not permit the machine to move forward or backward unless the extractor arm is located in the center of the carriage between the indicating arrows located on the arm guard.<br /> <br /> &lt;u&gt;Powered Roller Cutout (PRC-1 or PRC-2) ''(if equipped)''&lt;/u&gt; – Disengages the powered roller function when the photo eye positioned on the edge of the BE battery compartment is disrupted by a battery, requiring additional input from the operator. Pressing the &quot;Power Roller Cutout&quot; override button (see above) on the dash will resume  powered roller operation when loading or unloading batteries from the BE carriage.<br /> <br /> &lt;u&gt;Horn ''(If equipped)''&lt;/u&gt; – Button located on the dash (see above).  Used to alert personnel before moving the BE.<br /> <br /> &lt;u&gt;Strobe Light ''(If equipped)''&lt;/u&gt; – Located on a vertical stanchion mounted to the right rear of the operator compartment. For units equipped with optional overhead guard (OHG), the beacon is located above of the operator compartment.  Beacon automatically flashes when the BE is switched on to visually notify the BE is in use.<br /> <br /> &lt;u&gt;Audible Alarm ''(if equipped)''&lt;/u&gt; – Mounted in the same location as the Strobe Light.  Automatically sounds when the BE is switched on to notify personnel that the BE is in use.<br /> <br /> &lt;u&gt;Blue Light ''(if equipped)''&lt;/u&gt; - Mounted at an elevated position on either end of the extractor which project a bright, highly concentrated blue beam pattern on the ground visually alerting personnel to the direction the extractor is moving.<br /> <br /> === &lt;big&gt;&lt;u&gt;Operation Overview&lt;/u&gt;&lt;/big&gt; ===<br /> <br /> * All operators should be familiar with the operator console of the extractor before performing any battery changes.  The controls of the console are simple and well marked.  It consists of six, manually operated, hydraulic control valves and a three position selector switch which controls the left and right vacuum cups (or optional magnets).<br /> * The operator shall make certain there are no persons or obstacles in the extractor path prior to traveling forward or reverse.<br /> * All manual valves are moved in the direction of the function travel which it controls with exception of the lift/lower valve, which is pulled toward the operator for &quot;up&quot; and pushed away for &quot;down.&quot;<br /> * In the event of any failure or malfunction, step off the dead-man switch or press the E-stop button and all functions will stop immediately, locking all hydraulics in place.<br /> * The extractor arm must be in the center of the carriage or the unit will not travel forward or reverse.<br /> * To ensure smooth operation, all valve movements should be made in a slow, deliberate motion.<br /> * Only one key should be provided to operate the extractor.<br /> * When leaving the machine, the operator shall turn off the key switch, remove the key and logout out of the IIoT (if equipped) to prevent unauthorized use<br /> * Ensure all the batteries and cables are properly stored in the battery stands prior to moving the BE.<br /> * The BE is designed to carry only one battery in each compartment on the carriage.<br /> * When loading the BE, position the batteries in the center of the compartments on the powered rollers to prevent any battery movement when transporting.<br /> * Ensure there are no projections outside of the carriage before moving the BE.<br /> <br /> === &lt;u&gt;&lt;big&gt;Operating Instructions&lt;/big&gt;&lt;/u&gt; ===<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Pre-Change Out Preparation&lt;/u&gt;&lt;/big&gt; ====<br /> 1. Position lift truck for change out in designated area.<br /> <br /> 2. Remove all battery restraints and disconnect battery cables following manufacturers guidelines.  (Be sure to position battery cables so as not to be damaged by the battery during change out.)<br /> <br /> 3. Board battery extractor and close safety gate.  (Gate must be fully closed or unit will not operate.)<br /> <br /> 4. Turn key switch to &quot;ON&quot; position. <br /> <br /> 5. Log in on the HMI display (if equipped with BE-IIoT package).<br /> <br /> 6. Depress foot pedal.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Discharged Battery Removal&lt;/u&gt;&lt;/big&gt; ====<br /> 1. Move extractor forward or reverse to position center of empty compartment with center of lift truck battery compartment. (Lead roller of extractor is equipped with a centering groove.  Users may find it beneficial to mark center of lift truck compartment to aid in alignment.)<br /> <br /> 2. Align extractor's roller compartment height with lift truck's battery compartment.<br /> <br /> 3. Rotate extractor arm into battery compartment aligned in Step 2.<br /> <br /> 4. Move extractor arm toward battery until vacuum cup/magnet contacts battery.<br /> <br /> [[File:NOTICE-warn.png|alt=NOTICE|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:NOTICE-warn.png]] '''DO NOT force cup/magnet into battery after initial contact with battery is made.'''<br /> <br /> 5. Energize vacuum/magnet by turning selector switch to proper direction, left or right.<br /> <br /> 6. Move extractor arm away from lift truck toward center of extractor roller bed, removing discharged battery.  (Battery should be pulled past first three idler rollers onto first or second powered roller.)<br /> <br /> 7. Turn off vacuum/magnet and move extractor arm away from battery 1&quot; to 2&quot;.<br /> <br /> 8. Rotate extractor arm out of battery compartment into opposite compartment (if empty) and center arm in carriage.<br /> <br /> 9. Move battery into center of compartment using powered rollers.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Charged Battery Retrieval&lt;/u&gt;&lt;/big&gt; ====<br /> 1. Locate charged battery for appropriate type of lift truck being changed.<br /> <br /> 2. Raise battery extractor roller compartment to proper level to gain access as needed to disconnect desired battery from its charger and disengage battery safety stop.<br /> <br /> [[File:WARNING-warn.png|alt=WARNING|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:WARNING-warn.png]] '''ALWAYS be sure charging has been completed and charger is not still charging battery. Dangerous sparking/arcing can occur if battery is unplugged from charger while charging.'''<br /> <br /> 3. Move extractor to appropriate rack position and align empty roller compartment with the center of the battery storage rack compartment.  ''(The battery safety stop of each compartment is the center of that compartment and should be used for alignment with the groove in the lead roller of the battery extractor compartment.'') <br /> <br /> 4. Rotate arm into empty compartment (if not already positioned there.)<br /> <br /> 5. Move extractor arm toward battery until vacuum cup/magnet contacts battery.<br /> <br /> 6. Energize vacuum cup/magnet by turning selector switch to proper direction, left or right.<br /> <br /> [[File:NOTICE-warn.png|alt=NOTICE|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:NOTICE-warn.png]] '''DO NOT force cup/magnet into battery after initial contact with battery is made.'''<br /> <br /> 7. Move extractor arm away from battery rack toward center of extractor roller bed, removing charged battery.  (Battery should be pulled past first three idler rollers onto first or second powered roller.)<br /> <br /> 8. Turn off vacuum/magnet and move extractor arm away from battery 1&quot; to 2&quot;.<br /> <br /> 9. Rotate extractor arm out of battery compartment into fully vertical position.<br /> <br /> 10. Move battery into center of compartment using powered rollers.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Discharged Battery Return&lt;/u&gt;&lt;/big&gt; ====<br /> 1. If required, adjust extractor compartment height to battery rack level with open battery compartment.  Drive extractor to align roller compartment containing discharged battery with open battery compartment.<br /> <br /> 2. Return discharged battery to battery rack using powered rollers.<br /> <br /> '''''NOTE:''''' ''In most instances, batteries can be deposited into battery racks in one motion using only powered rollers.  When this does not work, the battery may need slight assistance from extractor arm.  To do this, rotate arm into compartment such as one would if removing battery from rack.  If extractor is vacuum equipped, position top edge of cup slightly higher than edge of battery (or over lifting eye if so equipped) to prevent cup from adhering to battery - No vacuum/magnet is necessary for pushing. DO NOT activate vacuum/magnet switch.  Slowly push battery into rack until fully into compartment.''<br /> <br /> 3. Engage battery safety stop and connect battery to charger as required.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Charged Battery Installation&lt;/u&gt;&lt;/big&gt; ====<br /> 1. Lower extractor to fully lowered position.<br /> <br /> 2. Drive extractor back to lift truck and align roller compartment containing charged battery as performed in steps 1 and 2 of &quot;Discharged Battery Removal&quot;.<br /> <br /> 3. Move charged battery toward lift truck compartment by using powered rollers, verifying precise battery alignment.<br /> <br /> [[File:NOTICE-warn.png|alt=NOTICE|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:NOTICE-warn.png]] '''Many batteries are a tight fit into lift truck battery compartments. Care MUST be taken to ensure alignment is precise to avoid damage to battery, lift truck, and/or battery extractor.'''<br /> <br /> 4. Adjust extractor vertically as well as horizontally, if needed<br /> <br /> 5. Insert battery into lift truck as far as possible using only the powered rollers.<br /> <br /> 6. Rotate extractor arm into compartment and SLOWLY push battery into lift truck.  (Be sure to watch battery cables for interference.)<br /> <br /> 7. Return extractor arm to center of roller bed and lower extractor to fully lowered position.  Drive extractor out of immediate area.<br /> <br /> 8. Turn off key switch, remove key from switch, log out on the HMI display (if equipped with BE-IIoT package) and carefully exit extractor.<br /> <br /> 9. Secure newly installed battery in lift truck and reconnect battery cables.<br /> <br /> 10. Return lift truck to service<br /> {|<br /> ![[File:Caution-Warning.png|alt=CAUTION|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:Caution-Warning.png]]<br /> |'''DO NOT drive the BE into the travel path end stops. The end stops are designed to prevent the BE from accidentally traveling beyond its designated travel path. Driving the BE into the end stops will cause the BE to stop suddenly, possibly causing damage to the end stop, the BE and/or personal injury.'''<br /> |}<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Optional Powered Roller Cutout Operation&lt;/u&gt;&lt;/big&gt; ====<br /> Units equipped with optional Powered Roller Cutout, the powered roller override button must be depressed in addition to actuating the hydraulic valve when a battery disrupts the photo eye(s) at the edge of the battery compartments while using the powered rollers to transfer batteries on and off of the battery extractor.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;IIoT Equipped Units&lt;/u&gt;&lt;/big&gt; ====<br /> Units shipped after February, 2020 are equipped with BE-IIoT (Industrial Internet of Things) package. Operators must log in to the BE-IIoT system using the HMI (Human Machine Interface) display located on the dashboard to operate the extractor.<br /> <br /> When finished operating the extractor, the operator should log out of the BE-IIoT to prevent unauthorized access and/or operation of the extractor.<br /> <br /> == &lt;big&gt;Manual Unloading&lt;/big&gt; ==<br /> '''Lockout/tagout and de-energize all equipment prior to manually unloading any battery.'''<br /> <br /> In the event of power loss or an operational malfunction of the BE not allowing a battery to be unloaded using normal operating procedures, it is recommended a battery be removed from the BE using certified and approved vertical extraction methods and devices.<br /> {|<br /> |[[File:DANGER-warn.png|alt=DANGER|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:DANGER-warn.png]]<br /> |'''Read, understand and observe all safety warnings and procedures related to the vertical extraction device(s) being used.'''<br /> |}<br /> Should the status of the BE not allow for safe vertical extraction (due to position in the battery aisle or level of the inner carriage), only repairs required to safely maneuver the BE to a position allowing for safe vertical extraction should be made.  Once any batteries are safely unloaded, any remaining repairs can be made.<br /> {|<br /> |[[File:DANGER-warn.png|alt=DANGER|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:DANGER-warn.png]]<br /> |'''Extreme care should be taken when working under or around equipment supporting elevated loads. Unexpected movement of the equipment could cause the load and/or equipment to fall. ALWAYS be sure devices of adequate size and strength are in place to prevent any personnel working under the elevated load from being crushed. Serious personal injury or death will occur.'''<br /> |}<br /> <br /> == &lt;big&gt;Spare Parts List&lt;/big&gt; ==<br /> Use only BHS approved replacement parts.<br /> <br /> Refer to the appropriate Spare Parts Kit (vacuum equipped units - Pt# BE-SPKV-TS, magnet equipped units - Pt# BE-SPKM-TS) for the list of items recommended by BHS to have on hand for BE-TS models to minimize any downtime due to minor breakdowns that may occur under normal operating conditions.<br /> <br /> BHS offers many replacement parts kits containing relevant or related parts when replacing certain individual parts or replacing any obsolete / upgraded parts.<br /> <br /> BHS also offers a supplement hose kit (Pt# 80342003) which contains an assortment of hoses allowing any hose on the extractor to be replaced immediately with a temporary hose of equal length or longer. After the extractor is back up and running, the failed hose can be taken to have an exact replacement made. Once the new hose is made and installed, the temporary hose can be returned to the kit for future use.<br /> <br /> Go to [[www.bhs1.com]] and click &quot;Parts&quot; for all the latest parts kits and corresponding installation instructions (if applicable).<br /> <br /> BHS recommends that a full maintenance inspection report similar to the one provided be done at least once a month.<br /> <br /> Any parts found to be excessively worn or damaged should promptly be replaced unless said parts pose a safety risk to the operator and/or extractor, in which case the unit should be removed from service until the problem(s) are remedied (See<br /> <br /> Operator's Daily Checklist.)<br /> <br /> ''Note: Spare parts kits contain parts for the most current machine design/configuration. Due to continuous design and manufacturing updates and improvements, not all the parts in the spare parts kits may be compatible with older units. Consult factory when ordering spare or replacement parts for existing units in the field to ensure part compatibility.''<br /> <br /> = &lt;big&gt;Parts Sections&lt;/big&gt; =<br /> <br /> == &lt;big&gt;Chassis&lt;/big&gt; ==<br /> <br /> === &lt;big&gt;&lt;u&gt;Equalization Components&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Equalization Components.png|alt=BE-TS Chassis Equalization|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PT0222-1<br /> |LINK-CONNECTING-#60<br /> |<br /> |<br /> |8<br /> |-<br /> |2<br /> |HW0017<br /> |NUT-HEX-3/4-10<br /> |<br /> |<br /> |8<br /> |-<br /> |3<br /> |HW0115<br /> |WASHER-LOCK-3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |43097001<br /> |STUD-ANCHOR-5&quot;<br /> |<br /> |''Upper''<br /> |4<br /> |-<br /> |5<br /> |HW0020<br /> |NUT-JAM-3/4-10<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43097002<br /> |STUD-ANCHOR-2&quot;<br /> |<br /> |''Lower''<br /> |4<br /> |-<br /> |7<br /> |00158001-14<br /> |CHAIN-ROLLER-#60<br /> |<br /> |<br /> |4<br /> |}<br /> [[File:BE-TS Equalization Components - 1.0.2.png|alt=BE-TS Chassis Equalization 2|frameless|575x575px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PT0416<br /> |COLLAR-SHAFT-1 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |2<br /> |43097006<br /> |KEY-3/8&quot; X 2 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |PT0224<br /> |SPROCKET-60B12 X 1 1/2&quot;<br /> |<br /> |''Keyed in line''<br /> |8<br /> |-<br /> |4<br /> |PT0405<br /> |FLANGE BEARING-2 BOLT-1 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1 1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |6<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> | rowspan=&quot;4&quot; |7<br /> |43127001<br /> |SHAFT-EQUALIZATION-81.75&quot;<br /> |<br /> |''BE-24-2-TS''<br /> |2<br /> |-<br /> |43327001<br /> |SHAFT-EQUALIZATION-105.75&quot;<br /> |<br /> |''BE-36-2-TS''<br /> |2<br /> |-<br /> |44327001<br /> |SHAFT-EQUALIZATION-117.75&quot;<br /> |<br /> |''BE-42-2-TS''<br /> |2<br /> |-<br /> |44527001<br /> |SHAFT-EQUALIZATION-75.75&quot;<br /> |<br /> |''BE-42-1-TS''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |8<br /> |PT0503<br /> |BEARING-FLANGED LOAD-2 1/4&quot;<br /> |<br /> |''Used after December 2003''<br /> |8<br /> |-<br /> |43026001<br /> |BEARING-FLANGED LOAD-2 1/4&quot; ''(MACHINED)''<br /> |<br /> |''Used prior to December 2003''<br /> |8<br /> |-<br /> |9<br /> |HW0025<br /> |NUT-JAM-7/8-14<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0117<br /> |WASHER-LOCK-7/8&quot; ''(NOT SHOWN)''<br /> |<br /> |''Used prior to August 2002''<br /> |8<br /> |}<br /> <br /> === &lt;u&gt;'''&lt;big&gt;Bridge &amp; Cross Bar&lt;/big&gt;'''&lt;/u&gt; ===<br /> [[File:BE-TS Bridge and Cross Bar.png|alt=BE-TS Bridge and Cross Bar|frameless|524x524px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1 1/4&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |2<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |20<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |20<br /> |-<br /> |4<br /> |HW0515<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |''Fully Threaded''<br /> |8<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> === &lt;u&gt;'''&lt;big&gt;Lift Cylinder Connections&lt;/big&gt;'''&lt;/u&gt; ===<br /> [[File:BE-TS Lift Cylinder Connections.png|alt=BE-TS Lift Cylinder Connections|frameless|589x589px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |00158001-13<br /> |CHAIN-ROLLER-#80<br /> |<br /> |<br /> |4<br /> |-<br /> |2<br /> |HW0014<br /> |NUT-HEX-1-8<br /> |<br /> |<br /> |8<br /> |-<br /> |3<br /> |43897002<br /> |STUD-LIFT-INNER FRAME<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |PT0204<br /> |LINK-CONNECTING-#80<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |43897001<br /> |STUD-LIFT-OUTER FRAME<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43815018<br /> |BRACKET-CYLINDER SUPPORT<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |SS0761<br /> |U-BOLT-CYLINDER MOUNTING<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |12<br /> |-<br /> |9<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |10<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |8<br /> |-<br /> | rowspan=&quot;2&quot; |11<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |<br /> |''Idler caster end of unit'' <br /> |2<br /> |-<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |''Drive wheel end of unit'' <br /> |2<br /> |-<br /> |12<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |14<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |43822002<br /> |CLEVIS ASSEMBLY<br /> |<br /> |''Sold as assembly only''<br /> |4<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Guidance Arm&lt;/big&gt;&lt;/u&gt;''' ===<br /> [[File:BE-TS Guidance Arm.png|alt=BE-TS Guidance Arm|frameless|562x562px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> ! colspan=&quot;2&quot; |NO. REQ<br /> |-<br /> |1<br /> |43015011<br /> |GUIDE ARM WELDMENT, 2 ROLLER<br /> |<br /> |<br /> |2<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |2<br /> |43017025<br /> |SPACER-GUIDE ARM<br /> |<br /> |''† 1/2&quot; thick''<br /> |4<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |3<br /> |41215204<br /> |GUIDE ARM WELDMENT, 4 ROLLER<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |2<br /> |-<br /> |4<br /> |41217274<br /> |SPACER-GUIDE ARM<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |4<br /> |-<br /> |5<br /> |43012007<br /> |CAM ROLLER-1 3/4&quot;<br /> |<br /> |<br /> |4<br /> |8<br /> |-<br /> |6<br /> |HW0115<br /> |WASHER-LOCK-3/4&quot;<br /> |<br /> |<br /> |4<br /> |8<br /> |-<br /> |7<br /> |HW0011<br /> |NUT-HEX-3/4-16<br /> |<br /> |<br /> |4<br /> |8<br /> |-<br /> |8<br /> |HW0509<br /> |BOLT-HHCS-1/2-13 X 4-1/2&quot;<br /> |<br /> |<br /> |4<br /> |6<br /> |-<br /> |9<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |6<br /> |-<br /> |10<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |4<br /> |6<br /> |-<br /> |11<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |4<br /> |6<br /> |-<br /> |12<br /> |41215234<br /> |GUIDE ARM WELDMENT (POLY)<br /> |<br /> |<br /> |2<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |13<br /> |41217317<br /> |POLY SLIDE MOUNTING BLOCK<br /> |<br /> |<br /> |4<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |14<br /> |41217318<br /> |POLY SLIDE<br /> |<br /> |<br /> |4<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |15<br /> |HW0501<br /> |BOLT-HHCS-1/2-13 X 1&quot;<br /> |<br /> |<br /> |12<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |16<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |12<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |17<br /> |91253A546<br /> |BOLT FHSCS-1/4-20 X 1-1/2&quot;<br /> |<br /> |<br /> |8<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |18<br /> |HW0003<br /> |NUT-NILN-1/4-20<br /> |<br /> |<br /> |8<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> ! colspan=&quot;7&quot; |NOTES<br /> |-<br /> | colspan=&quot;7&quot; |''† Older units equipped with (1) 1&quot; thick spacer per guide arm bracket.'' <br /> |-<br /> | colspan=&quot;7&quot; |''†† Multiple styles of guide arms have been utilized on extractors. Refer to the parts diagrams for correct replacement parts.'' <br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Roller Bed Componenets&lt;/big&gt;&lt;/u&gt;''' ===<br /> ==== '''&lt;big&gt;''Idler Rollers''&lt;/big&gt;''' ====<br /> [[File:BE-TS Idler Rollers.png|alt=BE-TS Idler Rollers|frameless|746x746px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;3&quot; |1<br /> |43182001<br /> |LEAD ROLLER ASSEMBLY-24&quot;<br /> |<br /> |''With alignment groove''<br /> |4<br /> |-<br /> |43382001<br /> |LEAD ROLLER ASSEMBLY-36&quot;<br /> |<br /> |''With alignment groove''<br /> |4<br /> |-<br /> |43482001<br /> |LEAD ROLLER ASSEMBLY-42&quot;<br /> |<br /> |''With alignment groove''<br /> |4<br /> |-<br /> | rowspan=&quot;3&quot; |2<br /> |43182002<br /> |IDLER ROLLER ASSEMBLY-24&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |43382002<br /> |IDLER ROLLER ASSEMBLY-36&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |43482002<br /> |IDLER ROLLER ASSEMBLY-42&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> | rowspan=&quot;3&quot; |3<br /> |43187002<br /> |SHAFT-HEX-.75&quot; X 25.75&quot;<br /> |<br /> |''24&quot; compartments''<br /> |8<br /> |-<br /> |43387002<br /> |SHAFT-HEX-.75&quot; X 37.75&quot;<br /> |<br /> |''36&quot; compartments''<br /> |8<br /> |-<br /> |43487002<br /> |SHAFT-HEX-.75&quot; X 43.75&quot;<br /> |<br /> |''42&quot; compartments''<br /> |8<br /> |-<br /> | rowspan=&quot;3&quot; |4<br /> |43187003<br /> |SHAFT-HEX-.75&quot; X 27.5&quot;<br /> |<br /> |''24&quot; compartments''<br /> |4<br /> |-<br /> |43387003<br /> |SHAFT-HEX-.75&quot; X 39.5&quot;<br /> |<br /> |''36&quot; compartments''<br /> |4<br /> |-<br /> |43487003<br /> |SHAFT-HEX-.75&quot; X 45.5&quot;<br /> |<br /> |''42&quot; compartments''<br /> |4<br /> |-<br /> |5<br /> |HW1058<br /> |PIN-HITCH<br /> |<br /> |<br /> |24<br /> |}<br /> '''&lt;big&gt;''Powered Rollers''&lt;/big&gt;'''<br /> <br /> [[File:BE-TS Powered Rollers.png|alt=BE-TS Powered Rollers|frameless|546x546px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;3&quot; |1<br /> |43182003<br /> |POWERED ROLLER-24&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |43382003<br /> |POWERED ROLLER-36&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |43485003<br /> |POWERED ROLLER-42&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |2<br /> |43087001<br /> |JOURNAL-POWERED ROLLER<br /> |<br /> |<br /> |10<br /> |-<br /> |3<br /> |PT0404<br /> |FLANGE BEARING-3-BOLT-1&quot;<br /> |<br /> |<br /> |20<br /> |-<br /> |4<br /> |HW0321<br /> |BOLT-HHCS-5/16-18 X 1 1/4&quot;<br /> |<br /> |<br /> |60<br /> |-<br /> |5<br /> |HW0105<br /> |WASHER-LOCK-5/16&quot;<br /> |<br /> |<br /> |60<br /> |-<br /> |6<br /> |HW0004<br /> |NUT-HEX-5/16-18<br /> |<br /> |<br /> |60<br /> |-<br /> |7<br /> |PT0033<br /> |SPROCKET-35B18 X 1&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |8<br /> |00197028<br /> |KEY-1/4&quot; X 1 1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |00158001-16<br /> |CHAIN-ROLLER-#35<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |PT0031<br /> |LINK-CONNECTING-#35<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |PT0418<br /> |COLLAR-SHAFT-1&quot;<br /> |<br /> |<br /> |10<br /> |}<br /> [[File:BE-TS Powered Rollers Detail A.png|alt=BE-TS Powered Rollers Detail A|frameless|542x542px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0120<br /> |MOTOR-HYDRAULIC-160CC<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW1071<br /> |KEY-WOODRUFF-#808 STD<br /> |<br /> |''Supplied with Item 1''<br /> |A/R<br /> |-<br /> |3<br /> |H1544<br /> |ADAPTER-#6 JICM X #10 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |18<br /> |-<br /> |5<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |18<br /> |-<br /> |6<br /> |43017004<br /> |PLATE-MOTOR MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |PT0302-1<br /> |COUPLING BODY-#40 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |PT0301<br /> |CHAIN-COUPLING-#40<br /> |<br /> |''Includes connecting pin''<br /> |2<br /> |-<br /> |9<br /> |00197026<br /> |KEY-1/4&quot; X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43097003<br /> |KEY-1/4&quot; X 5/8&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Hose Carrier&lt;/big&gt;&lt;/u&gt;''' ===<br /> [[File:BE-TS Hose Carrier.png|alt=BE-TS Hose Carrier|frameless|550x550px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PT0629<br /> |CARRIER TRACK<br /> |<br /> |''81 links required''<br /> |10'<br /> |-<br /> |2<br /> |PT0631<br /> |BRACKET-UPPER MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0212<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0032<br /> |NUT-NILN-#10-24<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |PT0630<br /> |BRACKET-LOWER MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |7<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |43817056-2<br /> |BRACKET-CARRIER TRACK MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |HW0401<br /> |BOLT-HHCS-3/8-16 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |14<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |43817057<br /> |PLATE-CARRIER TRACK SUPPORT<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === &lt;big&gt;'''&lt;u&gt;Cable Retractor&lt;/u&gt;'''&lt;/big&gt; ===<br /> [[File:BE-TS Cable Retractor.png|alt=BE-TS Cable Retractor|frameless|585x585px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |CCR-12HD<br /> |TAKE UP REEL-CARRIER TRACK<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Operator Gate&lt;/big&gt;&lt;/u&gt;''' ===<br /> [[File:BE-TS Discontinued Drop Bar Operator Gate.png|alt=BE-TS Discontinued Drop Bar Operator Gate|frameless|568x568px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43015004<br /> |GATE-OPERATOR<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0407<br /> |BOLT-HHCS-3/8-16 X 2 3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |<br /> |<br /> |1<br /> |}<br /> [[File:BE-TS Operator Gate Continued.png|alt=BE-TS Operator Gate Continued|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43017064-2<br /> |LATCH-SWING GATE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0418<br /> |BOLT-HHCS-3/8-16 X 2 1/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0031<br /> |NUT-LOCK-3/8-16<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |N/A<br /> |HINGE-SPRING<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |5<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |HW1037<br /> |STOP-GATE<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0003<br /> |NUT-NILN-1/4-20<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |N/A<br /> |TORSION SPRING<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |11<br /> |HW0816<br /> |SCREW-HHCS-SELF DRILLING-#10 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |43806001<br /> |ANTI-FATIGUE MAT<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |43017058-2<br /> |THRESHOLD<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |HW0107<br /> |WASHER-LOCK3/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |HW9002<br /> |GAS SPRING<br /> |80292015<br /> |<br /> |1<br /> |-<br /> |19<br /> |43017086-2<br /> |BRACKET-MOUNTING-SPRING<br /> |80292015<br /> |<br /> |2<br /> |-<br /> |20<br /> |HW0815<br /> |SCREW-SELF DRILLING-#12-24 X 1&quot; T-4<br /> |80292015<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Part Discontinued. Spring Hinge and Torsion Spring must be replaced with Gas Spring Kit.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Guarding&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Outer Carriage Guards&lt;/big&gt;''''' ====<br /> <br /> ===== '''''1-Piece Outside Frame Guarding''''' =====<br /> [[File:BE-TS Outside Frame Guard 1-Piece.png|alt=BE-TS Outside Frame Guard 1-Piece|frameless|550x550px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817038<br /> |GUARD-FAR END-TOP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817037<br /> |GUARD-FAR END-MIDDLE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43817035<br /> |GUARD-FAR END-BOTTOM<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |33<br /> |}<br /> <br /> ===== '''''Split Outside Frame Guarding''''' =====<br /> [[File:BE-TS Outside Split Frame Guard.png|alt=BE-TS Outside Split Frame Guard|frameless|562x562px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817103<br /> |GUARD-FAR END-TOP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817102<br /> |GUARD-FAR END-MIDDLE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43817101<br /> |GUARD-FAR END-BOTTOM<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |37<br /> |}<br /> <br /> ==== '''&lt;big&gt;''Inner Carriage Guards''&lt;/big&gt;''' ====<br /> <br /> ===== '''''Inner Carriage Guards (Rotary Actuator)''''' =====<br /> [[File:BE-TS Inner Carriage Guard Rotary.png|alt=BE-TS Inner Carriage Guard (Rotary Actuator Units)|frameless|554x554px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817041-2<br /> |GUARD-FRONT-OPERATOR CONSOLE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817042-2<br /> |GUARD-INNER-FRAME<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |43014006-2<br /> |GUARD-LINEAR DRIVE SCREW<br /> |<br /> |<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |4<br /> |43017010-2<br /> |GUARD-SIDE-ARM CARRIER SHAFT<br /> |<br /> |<br /> |2<br /> |-<br /> |44517002-2<br /> |GUARD-SIDE-ARM CARRIER SHAFT<br /> |<br /> |''† Single compartment units only''<br /> |1<br /> |-<br /> |5<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |34<br /> |-<br /> |6<br /> |43017009-2<br /> |BRACKET-SCREW GUARD MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Single Compartment Guard replaces standard, Far Side Arm Carrier Shaft Guard.'' <br /> |}<br /> '''''Inner Carriage Guards (Helical Actuator)'''''<br /> <br /> [[File:BE-TS Inner Carriage Guard Helical Actuator.png|alt=BE-TS Inner Carriage Guard (Helical Actuator Units)|frameless|547x547px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817041-2<br /> |GUARD-FRONT-OPERATOR CONSOLE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817042-2<br /> |GUARD-INNER-FRAME<br /> |<br /> |<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |3<br /> |43017081-2<br /> |GUARD-SIDE-ARM CARRIER SHAFT<br /> |<br /> |<br /> |2<br /> |-<br /> |44517003-2<br /> |GUARD-SIDE-ARM CARRIER SHAFT<br /> |<br /> |''† Single compartment units only''<br /> |1<br /> |-<br /> |4<br /> |43017080-2<br /> |BRACKET-SIDE GUARD MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |43017082-3<br /> |MOUNT-CHAIN GUARD-LEAD SCREW<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43017082-4<br /> |MOUNT-CHAIN GUARD-LEAD SCREW<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |43017083-2<br /> |GUARD-CHAIN-LEAD SCREW<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0347<br /> |BOLT-BHSCS-1/4-20 X 3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |28<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Single Compartment Guard replaces standard, Far Side Arm Carrier Shaft Guard.'' <br /> |}<br /> <br /> ==== '''&lt;big&gt;''Dash &amp; Platform Guards''&lt;/big&gt;''' ====<br /> [[File:BE-TS Dash &amp; Platform Guards.png|alt=BE-TS Dash &amp; Platform Guards|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41614004-2<br /> |DASHBOARD-OPERATOR CONSOLE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817040<br /> |KICK PLATE-OPERATOR CONSOLE<br /> |<br /> |''41.5&quot; high''<br /> |1<br /> |-<br /> |3<br /> |43817086-2<br /> |DASHBOARD-OPERATOR CONSOLE<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43817088<br /> |KICK PLATE-OPERATOR CONSOLE<br /> |<br /> |''33.5&quot;'' ''high''<br /> |1<br /> |-<br /> |5<br /> |43817110-2<br /> |FRAME-DASHBOARD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |A/R<br /> |PLATE-DASHBOARD<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |7<br /> |HW0060<br /> |NUT-CLIP-#10-24<br /> |<br /> |<br /> |12<br /> |-<br /> |8<br /> |SS0114<br /> |BHSCS-#10-24 X 1/2&quot;-SST<br /> |<br /> |<br /> |12<br /> |-<br /> |9<br /> |PL0602<br /> |VINYL EDGING<br /> |<br /> |''At Foot Switch (Not shown)'' <br /> |1'<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Consult factory''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Lift Cylinder Guards&lt;/big&gt;''''' ====<br /> [[File:BE-TS Lift Cylinder Guards.png|alt=BE-TS Lift Cylinder Guards|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;2&quot; |1<br /> |43815016<br /> |GUARD-CLEVIS<br /> |<br /> |Operator right / Far left<br /> |2<br /> |-<br /> |43815017<br /> |GUARD-CLEVIS<br /> |<br /> |Operator left / Far right<br /> |2<br /> |-<br /> |2<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Labels &amp; Placards&lt;/big&gt;&lt;/u&gt;''' ===<br /> [[File:BE-TS Labels &amp; Placards Chassis.png|alt=BE-TS Labels &amp; Placards Chassis|frameless|546x546px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |00196616<br /> |LABEL-&quot;NO RIDERS ALLOWED&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |00196210<br /> |LABEL-WARNING-&quot;OPERATION BY AUTHORIZED PERSONNEL ONLY&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43696001<br /> |PLACARD-OFF / ON<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43096018<br /> |PLACARD-RACK LEVEL ASSIST<br /> |<br /> |''† If equipped''<br /> |1<br /> |-<br /> |5<br /> |43096015<br /> |PLACARD-PLATFORM RAISE / LOWER<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43096010<br /> |PLACARD-HORN<br /> |<br /> |''† If equipped''<br /> |1<br /> |-<br /> |7<br /> |43096016<br /> |PLACARD-DRIVE / ARM ROTATION<br /> |<br /> |<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |8<br /> |43096012<br /> |PLACARD-VACUUM OFF / ON<br /> |<br /> |''Vacuum units only''<br /> |1<br /> |-<br /> |43096011<br /> |PLACARD-MAGNET OFF / ON<br /> |<br /> |''Magnet units only (Not shown)''<br /> |1<br /> |-<br /> |9<br /> |43096017<br /> |PLACARD-POWERED ROLLER CUTOUT OVERRIDE<br /> |<br /> |''† If equipped''<br /> |1<br /> |-<br /> |10<br /> |43096013<br /> |PLACARD-POWERED ROLLERS / ARM TRAVERSE<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |00196633<br /> |LABEL-NOTICE-&quot;IN LINE VACUUM FILTER...&quot;<br /> |<br /> |''(1) per side (Vacuum units only)''<br /> |2<br /> |-<br /> |12<br /> |SM-1197<br /> |LABEL-ARM POSITION ARROW<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |00196609<br /> |LABEL-NOTICE-&quot;ARM MUST BE POSITIONED BETWEEN ARROWS...&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |00196602<br /> |LABEL-NOTICE-&quot;LUBRICATION POINTS ON UNDERSIDE&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |00196218<br /> |LABEL-WARNING-&quot;ELECTRICAL VOLTAGE HAZARD&quot;<br /> |<br /> |''Magnet units only''<br /> |1<br /> |-<br /> |16<br /> |00196238<br /> |LABEL-WARNING-&quot;STRONG MAGNETIC<br /> <br /> FIELD/DO NOT USE WITH PACEMAKER&quot;<br /> |<br /> |''†† Magnet units only''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Rack Level Assist (LAI), Horn and Powered Roller Cutout (PRC) are optional features. Not all units are equipped with these options.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Pacemaker Warning Label takes the place of the discontinued, Triangular Magnetic Field Label.''<br /> |}<br /> [[File:BE-TS Labels &amp; Placards Frame.png|alt=BE-TS Labels &amp; Placards Frame|frameless|549x549px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |00196004<br /> |LABEL-CAUTION-&quot;WATCH FOR BATTERY AND CHARGER CABLES IN TRAVEL PATH&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |00196216<br /> |LABEL-WARNING-&quot;CHAIN ENTANGLEMENT<br /> <br /> HAZARD&quot;<br /> |<br /> |''(1) per Clevis Guard'' <br /> |4<br /> |-<br /> |3<br /> |00196622<br /> |LABEL-LIFT POINT<br /> |<br /> |''(2) each end''<br /> |4<br /> |-<br /> |4<br /> |00196700<br /> |DECAL-BHS-24&quot; X 7.875&quot;<br /> |<br /> |''Far end (Not shown)''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |5<br /> |00196630<br /> |LABEL-NOTICE-HYD. OIL SPEC. (AW 68)<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |00196645<br /> |LABEL-NOTICE-HYD. OIL SPEC. (AW 32)<br /> |<br /> |''† See notes'' <br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |† Most units shipped prior to December 2014 require AW 68 Hydraulic Oil. Some units shipped prior to December 2014 shipped with AW 32 for low temperature applications.<br /> |}<br /> <br /> == &lt;big&gt;Extractor Arm&lt;/big&gt; ==<br /> {| class=&quot;wikitable&quot;<br /> !SYMBOL<br /> !DESCRIPTION / NOTICE<br /> !ACTUATOR DIAGRAM<br /> |-<br /> |[[File:IOP-400 BE-SL&amp;DS (10-23) Rotary Actuator Symbol.png|alt=Rotary Actuator Symbol|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Rotary_Actuator_Symbol.png]]<br /> |<br /> ==='''&lt;u&gt;&lt;big&gt;Rotary Actuator Symbol&lt;/big&gt;&lt;/u&gt;'''===<br /> Battery Extractors shipped prior to May 2020 are equipped with Rotary Actuator Extractor Arms. Parts Diagrams Specific to the Rotary Actuator design are indicated with the Rotary Actuator symbol.<br /> |[[File:IOP-400 BE-SL&amp;DS (10-23) Rotary Actuator Extractor Arm.png|alt=BE-TS Rotary Actuator|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Rotary_Actuator_Extractor_Arm.png]]<br /> |-<br /> |[[File:IOP-400 BE-SL&amp;DS (10-23) Helical Actuator Symbol.png|alt=Helical Actuator Symbol|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Helical_Actuator_Symbol.png]]<br /> |<br /> ===&lt;big&gt;'''&lt;u&gt;Helical Actuator Symbol&lt;/u&gt;'''&lt;/big&gt;===<br /> Battery Extractors shipped from May 2020 to Present are equipped with Helical Actuator Extractor Arms. Parts Diagrams Specific to the Rotary Actuator design are indicated with the Helical Actuator Symbol.<br /> |[[File:IOP-400 BE-SL&amp;DS (10-23) Helical Actuator Extractor Arm.png|alt=BE-TS Helical Actuator|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Helical_Actuator_Extractor_Arm.png]]<br /> |}<br /> ===&lt;big&gt;&lt;u&gt;Vacuum Components &amp; Swing Arms&lt;/u&gt;&lt;/big&gt;===<br /> ====''&lt;big&gt;Vacuum Arms (Rotary Actuator)&lt;/big&gt;''====<br /> [[File:BE-TS Vacuum Arms (Rotary Actuator).png|alt=BE-TS Vacuum Arms (Rotary Actuator)|frameless|619x619px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;2&quot; |1<br /> |N/A<br /> |ARM-PUSH/PULL-30&quot;<br /> |<br /> |''&lt;sup&gt;†&lt;/sup&gt; Discontinued''<br /> |1<br /> |-<br /> |N/A<br /> |ARM-PUSH/PULL-36&quot;<br /> |<br /> |''&lt;sup&gt;†&lt;/sup&gt; Discontinued''<br /> |1<br /> |-<br /> |2<br /> |HW0509<br /> |BOLT-HHCS-1/2-13 X 4 1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |P0505<br /> |BUSHING-RED-#6 NPT X #4 FNPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |P0402<br /> |HOSE BARB-1/4 X #4 MNPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0428<br /> |STUD-VACUUM-3/8-16 X 5&quot;<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |9<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |HW-KIT-2<br /> |<br /> |40<br /> |-<br /> |10<br /> |HW1001<br /> |SPRING-3/8&quot;<br /> |HW-KIT-2<br /> |<br /> |24<br /> |-<br /> |11<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |12<br /> |HW0424<br /> |NUT-JAM-3/8-16<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |REF<br /> |43052006<br /> |ADJUSTABLE PUSH/PULL ARM<br /> |<br /> |''Includes Items 13 through 17''<br /> |1<br /> |-<br /> |13<br /> |43057034<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |43055008<br /> |VACUUM CUP MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''&lt;sup&gt;†&lt;/sup&gt; One-piece Arms no longer available. Must replace with Adjustable Arm.''<br /> |}<br /> <br /> ====&lt;big&gt;''Vacuum Cups''&lt;/big&gt;====<br /> [[File:BE-TS Vacuum Cups.png|alt=Vacuum Cups|frameless|563x563px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;4&quot; |A/R<br /> |00162004<br /> |VACUUM CUP-10&quot; 3-PC (STANDARD)<br /> |<br /> |''&lt;sup&gt;†&lt;/sup&gt; Includes Items 1 through 4''<br /> | rowspan=&quot;4&quot; |A/R<br /> |-<br /> |00162003<br /> |VACUUM CUP-12&quot; 3-PC (STANDARD)<br /> |<br /> |''&lt;sup&gt;†&lt;/sup&gt; Includes Items 4 through 7''<br /> |-<br /> |00162007<br /> |VACUUM CUP-10&quot; 3-PC, REINFORCED<br /> |<br /> |''Includes Items 1,3,4 &amp; 8''<br /> |-<br /> |00162005<br /> |VACUUM CUP-12&quot; 3-PC, REINFORCED<br /> |<br /> |''Includes Items 4,5,7 &amp; 9''<br /> |-<br /> |1<br /> |00164006<br /> |CASTING-10&quot; VACUUM CUP<br /> |<br /> | rowspan=&quot;3&quot; |''10&quot; cup only''<br /> |1<br /> |-<br /> |2<br /> |00164004<br /> |SEAL-RUBBER-10&quot;<br /> |<br /> |1<br /> |-<br /> |3<br /> |00165002<br /> |PLATE-FRONT-10&quot;<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0311<br /> |BOLT-FHSCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |00166001<br /> |CASTING-12&quot; VACUUM CUP<br /> |<br /> | rowspan=&quot;3&quot; |''12&quot; cup only''<br /> |1<br /> |-<br /> |6<br /> |00164001<br /> |SEAL-RUBBER-12&quot;<br /> |<br /> |1<br /> |-<br /> |7<br /> |00165001<br /> |PLATE-FRONT-12&quot;<br /> |<br /> |1<br /> |-<br /> |8<br /> |00164007<br /> |SEAL-RUBBER-10&quot;-REINFORCED<br /> |<br /> |<br /> |A/R<br /> |-<br /> |9<br /> |00167003<br /> |SEAL-RUBBER-12&quot;-REINFORCED<br /> |<br /> |<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''&lt;sup&gt;†&lt;/sup&gt; 10&quot; and 12&quot; 1-Piece Cups no longer available. Must replace with 3-Piece Cup. Verify required cup size prior to ordering.''<br /> |}<br /> <br /> ====&lt;big&gt;''Swing Arms (Rotary Actuator)''&lt;/big&gt;====<br /> [[File:BE-TS Swing Arms (Rotary Actuator).png|alt=BE-TS Swing Arms (Rotary Actuator)|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> |ITEM<br /> |BHS PART NUMBER<br /> |DESCRIPTION<br /> |REF. KIT NO.<br /> |NOTES<br /> |NO. REQ<br /> |-<br /> | rowspan=&quot;3&quot; |1<br /> |45055001<br /> |TIE PLATE-SWING ARM<br /> |<br /> |BE-24-2-TS<br /> |1<br /> |-<br /> |45255001<br /> |TIE PLATE-SWING ARM<br /> |<br /> |BE-36-2-TS (NOT SHOWN)<br /> |1<br /> |-<br /> |45355001<br /> |TIE PLATE-SWING ARM<br /> |<br /> |BE-42-2-TS (NOT SHOWN)<br /> |1<br /> |-<br /> |2<br /> |43055004<br /> |SWING ARM-RHS<br /> |†<br /> |NOT SOLD INDIVIDUALLY<br /> |1<br /> |-<br /> |3<br /> |43055002<br /> |SWING ARM-LHS<br /> |†<br /> |NOT SOLD INDIVIDUALLY<br /> |1<br /> |-<br /> |4<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0113<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0010<br /> |NUT-JAM-5/8-11<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |PT0413<br /> |COLLAR-SHAFT-3&quot;<br /> |80252001<br /> |<br /> |2<br /> |-<br /> |8<br /> |43027001<br /> |SHAFT-ROTARY ACTUATOR<br /> |80252001<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW1013<br /> |KEY-3/8&quot; X 12&quot;<br /> |80252001<br /> |<br /> |1<br /> |-<br /> |10<br /> |PT0419<br /> |BEARING-SAE 841-2&quot; I.D., 3&quot; OD, 1/8&quot; THICK<br /> |80252001<br /> |<br /> |3<br /> |-<br /> |11<br /> |43052005<br /> |CAP-BEARING<br /> |<br /> |INCLUDES BEARING<br /> |2<br /> |-<br /> |12<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |13<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |14<br /> |43057014<br /> |STANDOFF-WIRE<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |HW0312<br /> |SCREW-SHSS-1/4-20 X 1&quot;-CUP POINT<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |43057003<br /> |CUSHION-SWING ARM<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |43055001<br /> |STOP-SWING ARM<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |20<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |21<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |H1565<br /> |ADAPTER-45 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |23<br /> |H1600<br /> |ADAPTER-90 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |&lt;sup&gt;†&lt;/sup&gt; ''Included in multiple kits.''<br /> |-<br /> | colspan=&quot;6&quot; |See ''Single Compartment Swing Arm Stop for the the Single Compartment Swing Arm Stop.''<br /> |}<br /> <br /> === '''''Vacuum Swing Arm Stop (Rotary Actuator)''''' ===<br /> [[File:BE-TS Single Compartment Swing Arms (Rotary Actuator).png|alt=BE-TS Single Compartment Swing Arms (Rotary Actuator)|frameless|575x575px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |44555001<br /> |STOP-SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43057003<br /> |CUSHION-SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43057008<br /> |SPACER-SWING ARM STOP<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |}<br /> ====''&lt;big&gt;Vacuum Pump (Rotary Actuator)&lt;/big&gt;''====<br /> [[File:BE-TS Vacuum Pumps (Rotary Actuator).png|alt=BE-TS Vacuum Pumps (Rotary Actuator)|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |P0005<br /> |PUMP-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |P0208<br /> |FILTER-HI FLOW<br /> |<br /> |<br /> |3<br /> |-<br /> |3<br /> |P0503<br /> |NIPPLE-#4 NPT-BRASS<br /> |<br /> |<br /> |3<br /> |-<br /> |4<br /> |P0502<br /> |TEE-#4 FNPT-BRASS<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |P0506<br /> |ELBOW-STR-90 DEG-#4 NPT-BRASS<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |P0402<br /> |HOSE BARB-1/4 X #4 NPTM-BRASS<br /> |<br /> |<br /> |6<br /> |-<br /> |7<br /> |P0207<br /> |VALVE-VACUUM RELEASE<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |P0302<br /> |HOSE-VACUUM-1/4&quot; I.D.<br /> |<br /> |''Two 6&quot; pieces''<br /> |1'<br /> |-<br /> |9<br /> |P0302<br /> |HOSE-VACUUM-1/4&quot; I.D.<br /> |<br /> |''Short Arm side''<br /> |1'<br /> |-<br /> |10<br /> |P0302<br /> |HOSE-VACUUM-1/4&quot; I.D.<br /> |<br /> |''Long Arm side''<br /> |2'<br /> |-<br /> |11<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |HW0212<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |E0624<br /> |CONNECTOR-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |15a<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |''Not shown''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |16<br /> |E0501<br /> |CORD-14-4 SW/SOW<br /> |<br /> |''Withtout Ground Connection in Arm''<br /> | rowspan=&quot;2&quot; |15'<br /> |-<br /> |E0514<br /> |CORD-16-5 SW/SOW<br /> |<br /> |<br /> |-<br /> |17<br /> |43057014<br /> |STANDOFF-CABLE<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |HW0206<br /> |SCREW-RHMS-#10-32 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |19<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |20<br /> |43057021<br /> |PLATE-STIFFENER<br /> |†<br /> |<br /> |2<br /> |-<br /> |21<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |†<br /> |<br /> |12<br /> |-<br /> |22<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |†<br /> |<br /> |12<br /> |-<br /> |23<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |†<br /> |<br /> |12<br /> |-<br /> |24<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |†<br /> |''Not shown''<br /> |24<br /> |-<br /> |25<br /> |P0111<br /> |FILTER-VACUUM-INLINE<br /> |<br /> |''Not shown''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |&lt;sup&gt;†&lt;/sup&gt; ''Included in multiple kits.''<br /> |}<br /> ===&lt;u&gt;&lt;big&gt;Rotary Actuator&lt;/big&gt;&lt;/u&gt;===<br /> [[File:BE-TS Rotary Actuator.png|alt=BE-TS Rotary Actuator|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43046001<br /> |ROTARY ACTUATOR<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |80000002<br /> |ROTARY ACTUATOR BASE ASSEMBLY<br /> |<br /> |''Without Actuator''<br /> |1<br /> |-<br /> |2A<br /> |N/A<br /> |VERTICAL CARRIER PLATE-OUTER<br /> |<br /> |''Included with 80000002''<br /> |2<br /> |-<br /> |2B<br /> |N/A<br /> |VERTICAL CARRIER PLATE-INNER<br /> |<br /> |''Included with 80000002''<br /> |1<br /> |-<br /> |2C<br /> |N/A<br /> |CARRIER BASE PLATE<br /> |<br /> |''Included with 80000002''<br /> |1<br /> |-<br /> |3<br /> |HW1070<br /> |PIN-PULL DOWEL-5/8&quot; X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0508<br /> |BOLT-SHCS-1/2-13 X 3/4&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW1045<br /> |PIN-PULL DOWEL-3/8&quot; X 1 1/2&quot;<br /> |<br /> |''Included with 80000002''<br /> |6<br /> |-<br /> |6<br /> |HW0412<br /> |BOLT-SHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |''Included with 80000002''<br /> |12<br /> |-<br /> |7<br /> |H0010<br /> |FITTING-BULKHEAD-3/4-16 X #4 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 NPTM<br /> |<br /> |<br /> |2<br /> |}<br /> ===&lt;u&gt;&lt;big&gt;Carrier Shafts &amp; Bearings ''(Rotary Actuator)''&lt;/big&gt;&lt;/u&gt;===<br /> [[File:BE-TS Rotary Actuator Carrier Shafts.png|alt=BE-TS Carrier Shafts (Rotary Actuator)|frameless|560x560px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43057045<br /> |CARRIER SHAFT-EXTRACTOR ARM<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |2<br /> |43054007<br /> |BEARING-EXTRACTOR ARM CARRIER<br /> |80252002<br /> |''†† See notes''<br /> |4<br /> |-<br /> |3<br /> |HW0412<br /> |BOLT-SHCS-3/8-16 X 1 1/4&quot;<br /> |80252002<br /> |<br /> |16<br /> |-<br /> |4<br /> |PT0413<br /> |COLLAR-SHAFT-3&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |PT0624<br /> |FITTING-ZERK<br /> |80252002<br /> |''Not shown''<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Vacuum_Extended_Reach_(Rotary_Actuator) Vacuum Extended Reach (Rotary Actuator)] section for Extended Reach equipped units.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Carrier_Shafts_&amp;_Bearings Carrier Shafts &amp; Bearings (Helical Actuator)] section for Helical Actuator equipped units.''<br /> |}<br /> <br /> ===&lt;u&gt;&lt;big&gt;Drive Screw Components ''(Rotary Actuator)''&lt;/big&gt;&lt;/u&gt;===<br /> ====''&lt;big&gt;Drive Nut Assembly (Rotary Actuator)&lt;/big&gt;''====<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Drive Nut Assembly Rotary Actuator.png|alt=BE-SL&amp;DS Drive Nut Assembly Rotary Actuator|frameless|537x537px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Drive_Nut_Assembly_Rotary_Actuator.png]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43054006<br /> |DRIVE NUT ASSEMBLY<br /> |80252003<br /> |&lt;sup&gt;''†''&lt;/sup&gt; ''See notes''<br /> |1<br /> |-<br /> |2<br /> |HW0426<br /> |BOLT-SHCS-3/8-16 X 5 1/2&quot;<br /> |80252003<br /> |&lt;sup&gt;''††''&lt;/sup&gt; ''See notes''<br /> |4<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |80252003<br /> |&lt;sup&gt;''††''&lt;/sup&gt; ''See notes''<br /> |4<br /> |-<br /> |4<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |80252003<br /> |&lt;sup&gt;''††''&lt;/sup&gt; ''See notes''<br /> |4<br /> |-<br /> |5<br /> |PT0624<br /> |FITTING-ZERK<br /> |80252003<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''&lt;sup&gt;†&lt;/sup&gt; See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Drive_Nut_Assembly_(Helical_Actuator) Drive Nut Assembly (Helical Actuator)] section for Helical Actuator equipped units.''<br /> |-<br /> | colspan=&quot;6&quot; |''&lt;sup&gt;††&lt;/sup&gt; It is recommended to replace mounting hardware when replacing Drive Nut Assembly.''<br /> |}<br /> ====''&lt;big&gt;Drive Screw&lt;/big&gt;''====<br /> =====''[Current] Drive Screw Assembly (Frame #'s 374 to Present)''=====<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Drive Screw Rotary Current.png|alt=Current BE-SL &amp; BE-DS Drive Screw (Rotary Actuator)|frameless|531x531px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Drive_Screw_Rotary_Current.png]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43024001<br /> |SCREW-LINEAR DRIVE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |PT0119<br /> |SPROCKET-50B15 X 1 3/16&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43097004<br /> |KEY-1/4 X 7/8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |00158001-15<br /> |CHAIN-ROLLER-#50<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |PT0102<br /> |LINK-CONNECTING-#50<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |PT0406<br /> |FLANGE BEARING-4 BOLT-1 3/16&quot;<br /> |<br /> |''Alloy casting''<br /> |2<br /> |-<br /> |7<br /> |HW0503<br /> |BOLT-HHCS-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |PT0107<br /> |SPROCKET-50B15 X 1&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HC0121<br /> |MOTOR-HYDRAULIC-100CC<br /> |<br /> |''SAE 2-Bolt mount''<br /> |1<br /> |-<br /> |11<br /> |H1605<br /> |ADAPTER-90 DEG-#6 JICM X #10 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW1071<br /> |KEY-WOODRUFF-#808 STD<br /> |<br /> |''Supplied with Item 10''<br /> |A/R<br /> |-<br /> |13<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |14<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |15<br /> |43017007<br /> |PLATE-MOUNTING-SCREW DRIVE MOTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |43057019<br /> |PLATE-COVER<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0415<br /> |BOLT-SHCS-3/8-16 X 3/4&quot;<br /> |<br /> |<br /> |8<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> ! colspan=&quot;6&quot; |ITEMS BELOW ARE REQUIRED FOR REPLACING THE LINEAR DRIVE<br /> <br /> SCREW ON UNITS WITH FRAME #'S OF 373 AND EARLIER<br /> |-<br /> ! colspan=&quot;6&quot; |LINEAR DRIVE SCREW UPDATE KIT<br /> |-<br /> |REF<br /> |80252011<br /> |UPGRADE KIT<br /> |<br /> |<br /> |1<br /> |-<br /> |1<br /> |43024001<br /> |SCREW-LINEAR DRIVE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |PT0119<br /> |SPROCKET-50B15 X 1 3/16&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43097004<br /> |KEY-1/4&quot; X 7/8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |PT0406<br /> |FLANGE BEARING-4 BOLT-1 3/16&quot;<br /> |<br /> |''Alloy casting''<br /> |2<br /> |-<br /> |7<br /> |HW0503<br /> |BOLT-HHCS-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |16<br /> |43057019<br /> |PLATE-COVER<br /> |<br /> |<br /> |2<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |43057022<br /> |SHIM-18GA<br /> |<br /> |''May not be required'' - ''(Not shown)''<br /> |2<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |43057018<br /> |TEMPLATE-BEARING MOUNT PATTERN<br /> |<br /> |''(Not shown)''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |43057020<br /> |SPACER PLATE<br /> |<br /> |''(Not shown)''<br /> |2<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |80000015<br /> |INSTRUCTION DETAIL<br /> |<br /> |''(Not shown)''<br /> |REF<br /> |}<br /> <br /> =====''[Discontinued] Drive Screw Assembly (Frame #'s 373 and Earlier)''=====<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Drive Screw (Rotary Actuator) Discontinued.png|alt=Discontinued BE-SL &amp; BE-DS Drive Screw (Rotary Actuator)|frameless|532x532px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Drive_Screw_(Rotary_Actuator)_Discontinued.png]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |SCREW-LINEAR DRIVE (DISCONTINUED)<br /> |<br /> |''See 80252011 Upgrade Kit''<br /> |1<br /> |-<br /> |2<br /> |PT0118<br /> |SPROCKET-50B12 X 1 3/16&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43097004<br /> |KEY-1/4&quot; X 7/8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |00158001-15<br /> |CHAIN-ROLLER-#50<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |PT0102<br /> |LINK-CONNECTING-#50<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43057016<br /> |BLOCK-BEARING RETAINER<br /> |<br /> |<br /> |2<br /> |-<br /> |6a<br /> |PT0414<br /> |RACE-TAPERED ROLLER BEARING<br /> |<br /> |''Included with 43057016''<br /> |2<br /> |-<br /> |7<br /> |PT0623<br /> |SEAL-GREASE<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0416<br /> |BOLT-SHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |PT0415<br /> |BEARING-TAPERED ROLLER<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW1050<br /> |NUT-LOCK<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |43057017<br /> |PLATE-COVER<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0415<br /> |BOLT-SHCS-3/8-16 X 3/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |13<br /> |PT0624<br /> |FITTING-ZERK<br /> |<br /> |<br /> |2<br /> |}<br /> ===&lt;big&gt;&lt;u&gt;Hose Carrier Plate&lt;/u&gt;&lt;/big&gt;===<br /> [[File:BE-TS Hose Carrier Plate.png|alt=BE-TS Hose Carrier Plate|frameless|554x554px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43915018<br /> |PLATE-HOSE CARRIER<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |PT0618<br /> |BRACKET-FIXED END<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |PT0617<br /> |HOSE CARRIER<br /> |<br /> |''20 links required''<br /> |3 FT<br /> |-<br /> |5<br /> |PT0619<br /> |BRACKET-MOVING END<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |9<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |10<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HC0262<br /> |VALVE-CROSS PORT RELIEF<br /> |<br /> |''Includes cartridges''<br /> |1<br /> |-<br /> |12a<br /> |43846002<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''†† For Item 12 (Not shown)''<br /> |2<br /> |-<br /> |13<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |H1560<br /> |ADAPTER-45 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |E1329<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |''PVC - Includes cover''<br /> |1<br /> |-<br /> |19<br /> |HW0212<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |20<br /> |HW0102<br /> |WASHER-FLAT-#10-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |21<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |22<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |23<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |''For Items 21 &amp; 22 (Not shown)''<br /> |3<br /> |-<br /> |24<br /> |HW1076<br /> |BOLT-FHSCS-3/8-16 X 1&quot;<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Units built prior to February 2014 without extended reach option use (4) HW0403 mounting bolts.''<br /> <br /> ''†† Cartridges are for replacement only.''<br /> |}<br /> <br /> === &lt;big&gt;'''&lt;u&gt;Magnet Components ''(Rotary Actuator)''&lt;/u&gt;'''&lt;/big&gt; ===<br /> <br /> ==== '''''&lt;big&gt;[Discontinued] Magnet Arm Configuration&lt;/big&gt;''''' ====<br /> [[File:BE-TS (Discontinued) Magnet Arm Configuration.png|alt=BE-TS (Discontinued) Magnet Arm Configuration|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41257014<br /> |TIE PLATE-SWING ARM<br /> |<br /> |''All units''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |41655008<br /> |EXTENSION-ARM<br /> |<br /> |''BE-36 only (Not shown)''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |43455001<br /> |EXTENSION-ARM<br /> |<br /> |''BE-42 only (Not shown)''<br /> |1<br /> |-<br /> |2<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0113<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0010<br /> |NUT-JAM-5/8-11<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |41655001<br /> |CARRIER TUBE-MAGNET SWING SHAFT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |7<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |9<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |6<br /> |-<br /> |10<br /> |41657006<br /> |SHAFT-MAGNET SWING<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |41698001<br /> |KEY-3/8&quot; X 7/16&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |N/A<br /> |STOP-MAGNET SWING<br /> |<br /> |''† Dicontinued''<br /> |1<br /> |-<br /> |13<br /> |PT0430<br /> |FLANGE BEARING-4 BOLT-1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |HW0513<br /> |BOLT-HHCS-1/2-13 X 2 1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |15<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |16<br /> |-<br /> |16<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |17<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |-<br /> |18<br /> |41655002<br /> |PLATE-MAGNET MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |41257015<br /> |BLOCK-TIGHTENER<br /> |<br /> |''2-piece item''<br /> |1<br /> |-<br /> |20<br /> |41257016<br /> |BLOCK-FIXED<br /> |<br /> |''2-piece item''<br /> |1<br /> |-<br /> |21<br /> |HW0423<br /> |BOLT-SHCS-3/8-16 X 3 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0806<br /> |SET SCREW-3/8-16 X 2&quot;<br /> |<br /> |''Replaces Swivel Head''<br /> |4<br /> |-<br /> |24<br /> |HW0424<br /> |NUT-JAM-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |25<br /> |41657017<br /> |INSULATOR-MAGNET MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |26<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |27<br /> |41657008<br /> |PAD-MAGNET SLIDE<br /> |<br /> |<br /> |2<br /> |-<br /> |28<br /> |HW0314<br /> |BOLT-FHSCS-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Refer to [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#&amp;#x5B;Current&amp;#x5D;_Magnet_Arm_Configuration_(Rotary_Actuator) &lt;nowiki&gt;[Current] Magnet Arm Configuration (Rotary Actuator)&lt;/nowiki&gt;] section for replacement / upgrade parts.''<br /> |}<br /> <br /> ==== '''&lt;big&gt;''Magnet Pivot Stop (Rotary Actuator)''&lt;/big&gt;''' ====<br /> [[File:BE-TS Magnet Pivot Stop.png|alt=BE-TS Magnet Pivot Stop|frameless|547x547px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |MAGNET PUSH/PULL ARM<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |43055010<br /> |MAGNET MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |PT0470<br /> |BEARING-MAGNET PIVOT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0525<br /> |BOLT-CARRIAGE-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |5<br /> |HW0524<br /> |BOLT-CARRIAGE-1/2-13 X 2&quot;<br /> |<br /> |''†† Stop Plate location''<br /> |4<br /> |-<br /> |6<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |7<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |16<br /> |-<br /> |8<br /> |43058009<br /> |PLATE-ROTATION STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |43058003<br /> |SLEEVE-STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43058010<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |PL0501<br /> |GROMMET-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |43057037<br /> |INSULATOR-BOTTOM<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |16<br /> |41657008<br /> |SLIDE-MAGNET<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0314<br /> |BOLT-FHSCS-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |44558001<br /> |PLATE-ROTATION STOP<br /> |<br /> |''†† Single compartment units only''<br /> |2<br /> |-<br /> |REF<br /> |43052014<br /> |ADJUSTABLE PUSH-PULL ARM<br /> |<br /> |''Includes Items 19-23''<br /> |A/R<br /> |-<br /> |19<br /> |43055018<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |20<br /> |43055019<br /> |MAGNET MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |21<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |22<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† 1-Piece Arm no longer available. Must be replaced with Adjustable Arm.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Single compartment Stop Plates require (1) additional 2&quot; long Carriage Bolt each''<br /> |}<br /> <br /> ==== &lt;big&gt;''[Current] Magnet Arm Configuration (Rotary Actuator)''&lt;/big&gt; ====<br /> [[File:BE-TS (Current) Magnet Arm Configuration.png|alt=BE-TS (Current) Magnet Arm Configuration|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |80252012<br /> |MAGNET SWING STOP KIT<br /> |<br /> |''Includes Items 1 through 6''<br /> |A/R<br /> |-<br /> |1<br /> |43057029<br /> |PLATE-STOP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43058003<br /> |SLEEVE-STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |43057030<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |PL0501<br /> |GROMMET-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0509<br /> |BOLT-HHCS-1/2-13 X 4 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |44557003<br /> |PLATE-STOP<br /> |<br /> |''† Single compartment units only''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† For units equipped with Pivot Shaft. See [Current] Magnet Arm Configuration (Rotary Actuator) for units with Independent Magnet Pivot Bearings.'' <br /> |}<br /> <br /> ==== &lt;big&gt;''Magnet Mounting Hardware (Rotary Actuator)''&lt;/big&gt; ====<br /> [[File:BE-TS Magnet Mounting Hardware (Rotary Actuator).png|alt=BE-TS Magnet Mounting Hardware (Rotary Actuator)|frameless|554x554px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43032009<br /> |MAGNET ASSEMBLY<br /> |<br /> |''Includes Items 1 through 12''<br /> |A/R<br /> |-<br /> |1<br /> |N/A<br /> |ELECTROMAGNET-95VDC<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |E0314<br /> |SENSOR-PROXIMITY-30MM<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |N/A<br /> |GASKET-REAR<br /> |<br /> |''Discontinued - Not used''<br /> |2<br /> |-<br /> |4<br /> |41657002<br /> |COVER-PROXIMITY SENSOR HOUSING<br /> |<br /> |''Rear''<br /> |2<br /> |-<br /> |5<br /> |HW1065<br /> |SCREW-SHCS-#6-32 X 3/8&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |6<br /> |HW1066<br /> |WASHER-LOCK-#6<br /> |<br /> |<br /> |8<br /> |-<br /> |7<br /> |E0376<br /> |INDICATOR LIGHT<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |8<br /> |E0335<br /> |RECEPTACLE-5 PIN MALE<br /> |<br /> |''With 12&quot; lead''<br /> |2<br /> |-<br /> |9<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |N/A<br /> |GASKET-FRONT<br /> |<br /> |''Discontinued - Not used''<br /> |2<br /> |-<br /> |11<br /> |41657003<br /> |COVER-PROXIMITY SENSOR HOUSING<br /> |80252015<br /> |''Front''<br /> |2<br /> |-<br /> |12<br /> |HW0138<br /> |SCREW-FHSCS-#8-32 X 3/8&quot;<br /> |80252015<br /> |<br /> |8<br /> |-<br /> |13<br /> |HW0433<br /> |STUD-1/2-13 X 5&quot;<br /> |80252006<br /> | rowspan=&quot;5&quot; |''For units with Magnet Pivot Shaft only.'' <br /> <br /> ''See [Discontinued] Magnet Arm Configuration for units built prior to 11/01/14''<br /> |8<br /> |-<br /> |14<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |80252006<br /> |8<br /> |-<br /> |15<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |80252006<br /> |40<br /> |-<br /> |16<br /> |HW1002<br /> |SPRING-1/2&quot;<br /> |80252006<br /> |24<br /> |-<br /> |17<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |80252006<br /> |8<br /> |-<br /> |18<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |80252014<br /> | rowspan=&quot;4&quot; |''For units with independent Pivot Bearings only.'' <br /> <br /> ''See [Current] Magnet Arm Configuration for units built 11/01/14 to present)''<br /> |4<br /> |-<br /> |19<br /> |HW1002<br /> |SPRING-1/2&quot;<br /> |80252014<br /> |4<br /> |-<br /> |20<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |80252014<br /> |8<br /> |-<br /> |21<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |80252014<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Extractors built or replacement magnets shipped prior to October 2021 used multi-piece indicator lights with replaceable bulb and lens and are no longer available. Current indicator light is a 1-piece LED assembly. Replacement of any multi-piece component requires replacing entire assembly with current, 1-piece indicator light.''<br /> |}<br /> <br /> === '''''Magnet Cords (Rotary Actuator)''''' ===<br /> [[File:BE-TS Magnet Cords.png|alt=BE-TS Magnet Cords|frameless|555x555px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1105<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |''Weather proof box''<br /> |1<br /> |-<br /> |2<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |E1106<br /> |COVER-JUNCTION BOX<br /> |<br /> |''Weather proof with gasket'' <br /> |1<br /> |-<br /> |4<br /> |E0333<br /> |RECEPTACLE-9 PIN MALE<br /> |<br /> |''With 12&quot; lead''<br /> |1<br /> |-<br /> |5<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |6<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |7<br /> |E0334<br /> |CORD-5 PIN FEMALE<br /> |<br /> |''With 36&quot; lead''<br /> |2<br /> |-<br /> |8<br /> |E0332<br /> |CORD-9 PIN FEMALE-90 DEG<br /> |<br /> |''With 36&quot; lead''<br /> |1<br /> |-<br /> |9<br /> |PL0501<br /> |GROMMET-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |41657013-2<br /> |PLATE-PANEL MOUNTING<br /> |<br /> |''With single cable hole''<br /> |1<br /> |-<br /> |11<br /> |E0334-6<br /> |CORD-5 PIN FEMALE<br /> |<br /> |''With 72&quot; lead''<br /> |2<br /> |-<br /> |12<br /> |43057038-2<br /> |PLATE-PANEL MOUNTING<br /> |<br /> |''With dual cable holes''<br /> |1<br /> |}<br /> '''''&lt;big&gt;Magnet Panel Mounting (Rotary Actuator)&lt;/big&gt;'''''<br /> <br /> [[File:BE-TS Panel Mounting (Rotary Actuator).png|alt=BE-TS Panel Mounting (Rotary Actuator)|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43057021<br /> |PLATE-STIFFENER<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |''Not shown''<br /> |24<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |5<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |12<br /> |-<br /> |6<br /> |41637001<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0325<br /> |BOLT-5/16-18 X 1 3/4&quot;-PAN HEAD<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |N/A<br /> |INSULATOR-THREADED FEMALE<br /> |<br /> |''Discontinued''<br /> |4<br /> |-<br /> |9<br /> |HW0106<br /> |WASHER-FLAT-5/16&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0326<br /> |NUT-NILN-5/16-18<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |E1016<br /> |FUSE HOLDER<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |E0325<br /> |FUSE-7AMP-250VAC<br /> |<br /> |''FLM-7 or FNM-7''<br /> |1<br /> |-<br /> |16<br /> |PL0307<br /> |INSULATOR-MALE STUD<br /> |<br /> |<br /> |4<br /> |}<br /> '''''&lt;big&gt;Magnet Extractor Electrical Panel (Rotary Actuator)&lt;/big&gt;'''''<br /> <br /> [[File:BE-TS Magnet Extractor Electrical Panel (Rotary Actuator).png|alt=BE-TS Magnet Extractor Electrical Panel (Rotary Actuator)|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41637001<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41637002<br /> |WIRE WAY<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |41637003<br /> |WIRE WAY<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |41637004<br /> |TRACK-TERMINAL BLOCK MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |41637005<br /> |TRACK-TERMINAL BLOCK MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |7<br /> |HW0132<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |<br /> |10<br /> |-<br /> |8<br /> |HW0133<br /> |NUT-NILN-#8-32<br /> |<br /> |''Not shown''<br /> |16<br /> |-<br /> |9<br /> |E1020<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |12<br /> |-<br /> |10<br /> |E1040<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |E1330<br /> |END ANCHOR<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |E1009<br /> |RECTIFIER-FULL WAVE BRIDGE<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |HW0135<br /> |SCREW-RHMS-#8-32 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |E1313<br /> |SOCKET-RELAY-8 PIN<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0139<br /> |SCREW-RHMS-#8-32 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |E0331<br /> |RELAY-DPDT-110VAC<br /> |<br /> |''with Indicator Light''<br /> |2<br /> |}<br /> <br /> === &lt;big&gt;'''&lt;u&gt;Swing Arm Stop (Rotary Actuator)&lt;/u&gt;'''&lt;/big&gt; ===<br /> [[File:BE-TS Swing Arm Stop (Rotary Actuator).png|alt=BE-TS Swing Arm Stop (Rotary Actuator)|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055007<br /> |MOUNT-STOP-SWING ARM<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |2<br /> |43057024<br /> |STOP-SWING ARM<br /> |<br /> |''BE-24''<br /> |4<br /> |-<br /> |43057023<br /> |STOP-SWING ARM<br /> |<br /> |''BE-36 &amp; BE-42''<br /> |4<br /> |-<br /> |3<br /> |HW0304<br /> |BOLT-HHCS-1/4-20 X 1 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Vacuum_Swing_Arm_Stop_(Rotary_Actuator) Vacuum Swing Arm Stop (Rotary Actuator)] section for single compartment stop mount and stop.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Extended Reach (Rotary Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Vacuum Extended Reach (Rotary Actuator).png|alt=BE-TS Vacuum Extended Reach (Rotary Actuator)|frameless|536x536px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41257014<br /> |TIE PLATE-SWING ARM<br /> |<br /> |''All units''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |41655008<br /> |EXTENSION-ARM<br /> |<br /> |''BE-36 only (Not shown)''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |43455001<br /> |EXTENSION-ARM<br /> |<br /> |''BE-42 only (Not shown)''<br /> |1<br /> |-<br /> |2<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |P0301-1<br /> |HOSE-COIL-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |41257035<br /> |STANDOFF<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW1072<br /> |RESTRAINT-HOSE<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0318<br /> |BOLT-SHCS-1/4-20 X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |HW0312<br /> |SCREW-SHSS-1/4-20 X 1&quot;-CUP POINT<br /> |<br /> |<br /> |1<br /> |}<br /> [[File:BE-TS Vacuum Extended Reach (Rotary Actuator) 2.png|alt=BE-TS Vacuum Extended Reach (Rotary Actuator)|frameless|547x547px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41255005<br /> |ARM-EXTENSION-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0416<br /> |CYLINDER-EXTENDED REACH-VACUUM<br /> |<br /> |''2 1/2&quot; X 12&quot; Cylinder''<br /> |1<br /> |-<br /> |3<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JICM X #6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |41257031<br /> |PIN-CLEVIS END<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |00197036<br /> |PIN-ROD END<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1058<br /> |PIN-HITCH<br /> |<br /> |<br /> |4<br /> |}<br /> [[File:BE-TS Vacuum Extended Reach (Rotary Actuator) 3.png|alt=BE-TS Vacuum Extended Reach (Rotary Actuator) 3|frameless|541x541px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41255004<br /> |HOUSING-EXTENDED REACH-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41257030<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |41258002<br /> |PLATE-BEARING<br /> |80258001<br /> |''Side''<br /> |2<br /> |-<br /> |8<br /> |41258005<br /> |PLATE-SHIM<br /> |80258001<br /> |''Side''<br /> |2<br /> |-<br /> |9<br /> |41258003<br /> |PLATE-BEARING<br /> |80258001<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |10<br /> |41258004<br /> |PLATE-SHIM<br /> |80258001<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |11<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |28<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |28<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Extended Reach (Rotary Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Extended Reach Rotary Actuator.png|alt=BE-TS Extended Reach Rotary Actuator|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43046001<br /> |ROTARY ACTUATOR<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |80000002<br /> |ROTARY ACTUATOR BASE ASSEMBLY<br /> |<br /> |''Without Actuator''<br /> |1<br /> |-<br /> |2A<br /> |N/A<br /> |VERTICAL CARRIER PLATE-OUTER<br /> |<br /> |''Included with 80000002''<br /> |2<br /> |-<br /> |2B<br /> |N/A<br /> |VERTICAL CARRIER PLATE-INNER<br /> |<br /> |''Included with 80000002''<br /> |1<br /> |-<br /> |2C<br /> |N/A<br /> |CARRIER BASE PLATE<br /> |<br /> |''Included with 80000002''<br /> |1<br /> |-<br /> |3<br /> |HW1070<br /> |PIN-PULL DOWEL-5/8&quot; X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0508<br /> |BOLT-SHCS-1/2-13 X 3/4&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW1045<br /> |PIN-PULL DOWEL-3/8&quot; X 1 1/2&quot;<br /> |<br /> |''Included with 80000002''<br /> |6<br /> |-<br /> |6<br /> |HW0412<br /> |BOLT-SHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |''Included with 80000002''<br /> |12<br /> |-<br /> |7<br /> |H0010<br /> |FITTING-BULKHEAD-3/4-16 X #4 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |4<br /> |}<br /> [[File:BE-TS Extended Reach Rotary Actuator 2.png|alt=BE-TS Extended Reach Rotary Actuator |frameless|535x535px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PT0634<br /> |BRACKET-MALE END<br /> |<br /> |''Sols as a set''<br /> |1<br /> |-<br /> |2<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |10<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |PT0627<br /> |HOSE CARRIER<br /> |<br /> |''14 links required''<br /> |39&quot;<br /> |-<br /> |7<br /> |PT0634<br /> |BRACKET-FEMALE END<br /> |<br /> |''Sols as a set''<br /> |1<br /> |-<br /> |8<br /> |HC0262<br /> |VALVE-CROSS PORT RELIEF<br /> |<br /> |<br /> |1<br /> |-<br /> |8a<br /> |43046003<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''† For Item 8 (Not shown)''<br /> |2<br /> |-<br /> |9<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |H1546<br /> |ADAPTER-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |H1617<br /> |ADAPTER-45 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HC0237<br /> |VALVE-SEQUENCING<br /> |<br /> |<br /> |1<br /> |-<br /> |12a<br /> |43046005<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''† For Item 12 (Not shown)''<br /> |A/R<br /> |-<br /> |13<br /> |HW0317<br /> |BOLT-HHCS-1/4-20 X 3 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |H1560<br /> |ADAPTER-45 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |H1600<br /> |ADAPTER-90 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Cartridges are for replacement only''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Extended Reach (Rotary Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Extended Reach (Rotary Actuator).png|alt=BE-TS Magnet Extended Reach (Rotary Actuator)|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055011<br /> |ARM-EXTENSION-MAGNET<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0415<br /> |CYLINDER-EXTENDED REACH-MAGNET<br /> |<br /> |''2 1/2&quot; X 8&quot; Cylinder''<br /> |1<br /> |-<br /> |3<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JICM X #6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CLEVIS END<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-ROD END<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-EXTERNAL-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW1043<br /> |CLAMP-CYLINDER<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |43057044-2<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |43058019<br /> |SUPPORT-CABLE-BAND CLAMP<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> [[File:BE-TS Magnet Extended Reach (Rotary Actuator) 2.png|alt=BE-TS Magnet Extended Reach (Rotary Actuator) |frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055012<br /> |HOUSING-EXTENDED REACH-MAGNET<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |43058013<br /> |PLATE-BEARING-SIDE<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |43058016<br /> |PLATE-SHIM-SIDE<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |43058014<br /> |PLATE-BEARING-UPPER/LOWER<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43058015<br /> |PLATE-SHIM-UPPER/LOWER<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |24<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |24<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Extended Reach End Plate&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Extended Reach End Plate.png|alt=BE-TS Extended Reach End Plate|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |CARRIER SHAFT-EXTRACTOR ARM<br /> |<br /> |''† 3-Hole version''<br /> |A/R<br /> |-<br /> |2<br /> |PT0413<br /> |COLLAR-SHAFT-3&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |50057009<br /> |PLATE-END-3 HOLE<br /> |<br /> |''Replacement part only''<br /> |4<br /> |-<br /> |4<br /> |50057010<br /> |SHIM-END PLATE<br /> |<br /> |''†† See notes''<br /> |A/R<br /> |-<br /> |5<br /> |HW1076<br /> |BOLT-FHSCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |6<br /> |43057045<br /> |CARRIER SHAFT-EXTRACTOR ARM<br /> |<br /> |''1-Hole version''<br /> |2<br /> |-<br /> |7<br /> |43017076<br /> |PLATE-END-1 HOLE<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† 3-Hole Carrier Shaft no longer available. Must replace 3-Hole shaft with current, 1-Hole version along with new ennd plates &amp; hardware.'' <br /> |-<br /> | colspan=&quot;6&quot; |''†† Shim quantity varies due to manufacturing tolerances.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Carrier Shafts &amp; Bearings&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Carrier Shafts &amp; Bearings (Helical Actuator).png|alt=BE-TS Carrier Shafts &amp; Bearings (Helical Actuator)|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43057045<br /> |CARRIER SHAFT-EXTRACTOR ARM<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |2<br /> |43054007<br /> |BEARING-EXTRACTOR ARM CARRIER<br /> |80252002<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0412<br /> |BOLT-SHCS-3/8-16 X 1 1/4&quot;<br /> |80252002<br /> |<br /> |16<br /> |-<br /> |4<br /> |PT0413<br /> |COLLAR-SHAFT-3&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |50057010<br /> |SHIM-END PLATE<br /> |<br /> |<br /> |A/R<br /> |-<br /> |6<br /> |43017076<br /> |PLATE-END-1 HOLE<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |PT0624<br /> |FITTING-ZERK<br /> |80252002<br /> |''Not shown''<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Extended_Reach_End_Plate Extended Reach End Plate] section for Extended Reach equipped units.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Drive Nut Assembly (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Drive Nut Assembly (Helical Actuator).png|alt=BE-TS Drive Nut Assembly (Helical Actuator)|frameless|600x600px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43054006<br /> |DRIVE NUT ASSEMBLY<br /> |80252003<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0426<br /> |BOLT-SHCS-3/8-16 X 5 1/2&quot;<br /> |80252003<br /> |''† See notes''<br /> |4<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |80252003<br /> |''† See notes''<br /> |4<br /> |-<br /> |4<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |80252003<br /> |''† See notes''<br /> |4<br /> |-<br /> |5<br /> |PT0624<br /> |FITTING-ZERK<br /> |80252003<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† It is recommended to replce mounting hardware when replacing Drive Nut Assembly.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Swing Arms &amp; Actuator (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;[Discontinued] Helical Actuator&lt;/big&gt;''''' ====<br /> [[File:BE-TS Swing Arms &amp; Actuator (Helical Actuator).png|alt=BE-TS [Discontinued] Swing Arms &amp; Actuator (Helical Actuator)|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |HELICAL ACTUATOR<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |43057046<br /> |ACTUATOR BASE PLATE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43058022<br /> |SPACER-ACTUATOR<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0725<br /> |BOLT-HHCS-3/4-16 X 4-3/4&quot;-GR8<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0066<br /> |NUT-JAM-3/4-16-GR8<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43055013<br /> |SWING ARM-LHS<br /> |<br /> | rowspan=&quot;6&quot; |''†† See notes''<br /> |1<br /> |-<br /> |7<br /> |HW0620<br /> |BOLT-HHCS-5/8-11 X 1-1/4&quot;<br /> |<br /> |6<br /> |-<br /> |8<br /> |HW0013<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |6<br /> |-<br /> |9<br /> |43055014<br /> |SWING ARM-RHS<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1-1/4&quot;<br /> |<br /> |6<br /> |-<br /> |11<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |6<br /> |-<br /> |12<br /> |43042008<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |43042010<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE, LONG<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |H1619<br /> |ADAPTER-90 DEG-#6 JICM X #4 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |H0010<br /> |FITTING-H-BULKHEAD-1/4 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |H1504<br /> |ADAPTER-#6 JICM X #4 NPTM<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW1082<br /> |CLAMP-HOSE<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Discontinued Helical Actuator no longer available. Must replace with current Helical Actuator Retro Kit 80252032. See [Current] Helical Actuator.'' <br /> <br /> ''†† Swing arms manufactured prior to January 2022 use 10 bolts &amp; washers per Swing Arm.'' <br /> |}<br /> <br /> ==== '''''&lt;big&gt;[Current] Helical Actuator&lt;/big&gt;''''' ====<br /> [[File:BE-TS (Current) Swing Arms &amp; Actuator (Helical Actuator).png|alt=BE-TS (Current) Swing Arms &amp; Actuator (Helical Actuator)|frameless|544x544px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |N/A<br /> |43052020<br /> |HELICAL ACTUATOR ASSEMBLY<br /> |<br /> |''Includes Items 1 through 17''<br /> |1<br /> |-<br /> |1<br /> |HC0180<br /> |HELICAL ACTUATOR<br /> |80252032<br /> |<br /> |1<br /> |-<br /> |2<br /> |43057046<br /> |ACTUATOR BASE PLATE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43058022<br /> |SPACER-ACTUATOR<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0725<br /> |BOLT-HHCS-3/4-16 X 4-3/4&quot;-GR8<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0066<br /> |NUT-JAM-3/4-16-GR8<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43055013<br /> |SWING ARM-LHS<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0620<br /> |BOLT-HHCS-5/8-11 X 1-1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |8<br /> |HW0013<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |9<br /> |43055014<br /> |SWING ARM-RHS<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1-1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |11<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |12<br /> |43042011<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE, 90 DEG<br /> |80252032<br /> |''† See notes''<br /> |1<br /> |-<br /> |13<br /> |43042012<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE, SHORT<br /> |80252032<br /> |''† See notes''<br /> |1<br /> |-<br /> |14<br /> |H1619<br /> |ADAPTER-90 DEG-#6 JICM X #4 SAEM<br /> |80252032<br /> |<br /> |2<br /> |-<br /> |15<br /> |H0010<br /> |FITTING-H-BULKHEAD-1/4 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |H1504<br /> |ADAPTER-#6 JICM X #4 NPTM<br /> |80252032<br /> |<br /> |1<br /> |-<br /> |17<br /> |H1691<br /> |ADAPTER-45 DEG-#6 JICM X #4 NPTM<br /> |80252032<br /> |''† See notes''<br /> |1<br /> |-<br /> |18<br /> |HW1082<br /> |CLAMP-HOSE<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Hard-Pipes and 45 degree adapter required if replacing discontinued actuator with current Actuator Kit Part # 80252032 required for discontinued actuator replacement.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Swing Arm Stops &amp; Tie Plate&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Swing Arm Stops &amp; Tie Plate (Helical Actuator).png|alt=BE-TS Swing Arm Stops &amp; Tie Plate (Helical Actuator)|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43057050<br /> |TIE PLATE-HELICAL SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0113<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0010<br /> |NUT-JAM-5/8-11<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |43057052<br /> |STOP-POLY-SWING ARM<br /> |<br /> |''† See notes''<br /> |4<br /> |-<br /> |6<br /> |HW0441<br /> |BOLT-FHSCS-3/8-16 X 1-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW0031<br /> |NUT-LOCK-3/8-16, DEFORMED THREAD<br /> |<br /> |''† † See notes''<br /> |4<br /> |-<br /> |8<br /> |44555002<br /> |SWING ARM STOP<br /> |<br /> |''Single compartment use only''<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Replacement Poly Stop design updated from Square to Round. Stop Spacers not required with current, Round-Style Stops.''<br /> |-<br /> | colspan=&quot;6&quot; |''† † Deformed Thread Lock Nut replaces Acorn Nut and Split Lock Washer used previously.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Push/Pull Arm Mounting (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Push-Pull Arm Mounting.png|alt=BE-TS Push-Pull Arm Mounting (Helical Actuator)|frameless|542x542px]]<br /> {| class=&quot;wikitable&quot;<br /> ! rowspan=&quot;2&quot; |ITEM<br /> ! rowspan=&quot;2&quot; |BHS PART NUMBER<br /> ! rowspan=&quot;2&quot; |DESCRIPTION<br /> ! rowspan=&quot;2&quot; |REF. KIT NO.<br /> ! rowspan=&quot;2&quot; |NOTES<br /> ! colspan=&quot;3&quot; |NO. REQ<br /> |-<br /> !BE-24<br /> !BE-36<br /> !BE-42<br /> |-<br /> | rowspan=&quot;2&quot; |1<br /> |41655008<br /> |EXTENSION-ARM<br /> |<br /> |''†BE-36 units only''<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |1<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |43455001<br /> |EXTENSION-ARM<br /> |<br /> |''†BE-42 units only''<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |1<br /> |-<br /> |2<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> | colspan=&quot;2&quot; |12<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |12<br /> | colspan=&quot;2&quot; |24<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> | colspan=&quot;2&quot; |12<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |6<br /> | colspan=&quot;2&quot; |12<br /> |-<br /> ! colspan=&quot;8&quot; |NOTES<br /> |-<br /> | colspan=&quot;8&quot; |''† BE-24 units do not utilize an Arm Extension.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Extractor Arm (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Non-Pivoting Vacuum Cup Arm (Helical Actuator)&lt;/big&gt;''''' ====<br /> [[File:BE-TS Non-Pivoting Vacuum Cup Arm (Helical Actuator).png|alt=BE-TS Non-Pivoting Vacuum Cup Arm (Helical Actuator)|frameless|578x578px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0428<br /> |STUD-VACUUM-3/8-16 X 5&quot;<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |2<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |HW-KIT-2<br /> |<br /> |40<br /> |-<br /> |3<br /> |HW1001<br /> |SPRING-3/8&quot;<br /> |HW-KIT-2<br /> |<br /> |24<br /> |-<br /> |4<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0424<br /> |NUT-JAM-3/8-16<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |6<br /> |P0402<br /> |HOSE BARB-1/4&quot; X #4 MNPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |REF<br /> |43052014<br /> |ADJUSTABLE PUSH-PULL ARM<br /> |<br /> |''Includes Items 7 through 11''<br /> |A/R<br /> |-<br /> |7<br /> |43055018<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |43055019<br /> |VACUUM CUP MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Pivoting Vacuum Cup Arm (Helical Actuator)&lt;/big&gt;''''' ====<br /> [[File:BE-TS Pivoting Vacuum Cup Arm (Helical Actuator).png|alt=BE-TS Pivoting Vacuum Cup Arm (Helical Actuator)|frameless|525x525px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43052014<br /> |ADJUSTABLE PUSH-PULL ARM<br /> |<br /> |''Includes Items 1 through 5''<br /> |A/R<br /> |-<br /> |1<br /> |43055018<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43055019<br /> |VACUUM CUP MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |43055020<br /> |MOUNT-PIVOT-VACUUM CUP<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |PT0470<br /> |BEARING-PIVOT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0525<br /> |BOLT-CARRIAGE-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |9<br /> |HW0524<br /> |BOLT-CARRIAGE-1/2-13 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |11<br /> |HW0008<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |16<br /> |-<br /> |12<br /> |43058009<br /> |PLATE-ROTATION STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |43058003<br /> |SLEEVE-STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |43058010<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |4<br /> |-<br /> |16<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |43037002-2<br /> |SUPPORT-CABLE RESTRAINT<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |21<br /> |P0506<br /> |ELBOW-STR-90 DEG-#4 NPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |22<br /> |P0402<br /> |HOSE BARB-1/4&quot; X #4 MNPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |23<br /> |43057056-2<br /> |BRACKET-HOSE SUPPORT<br /> |<br /> |<br /> |2<br /> |-<br /> |24<br /> |PL0507<br /> |GROMMET-5/8&quot; I.D.<br /> |<br /> |<br /> |2<br /> |-<br /> |25<br /> |P0302<br /> |HOSE-VACUUM-1/4&quot; I.D.<br /> |<br /> |''2 pieces at 48&quot; each''<br /> |96&quot;<br /> |-<br /> |26<br /> |HW0443<br /> |BOLT-HHCS-3/8-16 X 3-1/2&quot;<br /> |HW-KIT-3<br /> |<br /> |8<br /> |-<br /> |27<br /> |HW1001<br /> |SPRING-3/8&quot;<br /> |HW-KIT-3<br /> |<br /> |16<br /> |-<br /> |28<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |HW-KIT-3<br /> |<br /> |32<br /> |-<br /> |29<br /> |HW0424<br /> |NUT-JAM-3/8-16<br /> |HW-KIT-3<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Cup Rotation Stop (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Vacuum Cup Rotation Stop (Helical Actuator).png|alt=BE-TS Vacuum Cup Rotation Stop (Helical Actuator)|frameless|583x583px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |445558001<br /> |PLATE-ROTATION STOP<br /> |<br /> |''† Single compartment units only''<br /> |2<br /> |-<br /> |2<br /> |HW0525<br /> |BOLT-CARRIAGE-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0524<br /> |BOLT-CARRIAGE-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0008<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Components (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Vacuum Components (Helical Actuator).png|alt=BE-TS Vacuum Components (Helical Actuator)|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43058021<br /> |STIFFENER PLATE-HELICAL SWING ARM<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |24<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |5<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |12<br /> |-<br /> |6<br /> |P0005<br /> |PUMP-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |P0207<br /> |VALVE-VACUUM RELEASE<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |P0208<br /> |FILTER-HI FLOW<br /> |<br /> |<br /> |3<br /> |-<br /> |9<br /> |H0011<br /> |NIPPLE-#4 X 2&quot;-BRASS<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |P0502<br /> |TEE-#4 FNPT-BRASS<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |P0506<br /> |ELBOW-STR-90 DEG-#4 NPT-BRASS<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |P0503<br /> |NIPPLE-#4 NPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |P0402<br /> |HOSE BARB-1/4&quot; X #4 MNPT-BRASS<br /> |<br /> |<br /> |6<br /> |-<br /> |14<br /> |P0111<br /> |FILTER-VACUUM-IN-LINE<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0206<br /> |SCREW-RHMS-#10-32 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |43037014-2<br /> |BRACKET-CABLE RESTRAINT<br /> |<br /> |<br /> |1<br /> |-<br /> |17<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |18<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |21<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |22<br /> |E0624<br /> |CONNECTOR-1/2&quot;<br /> |<br /> |''Includes Lock Nut''<br /> |1<br /> |-<br /> |23<br /> |HW0212<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Arm (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Arm (Helical Actuator).png|alt=BE-TS Magnet Arm (Helical Actuator)|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43052014<br /> |ADJUSTABLE PUSH-PULL ARM<br /> |<br /> |''Includes Items 1 through 5''<br /> |A/R<br /> |-<br /> |1<br /> |43055018<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43055019<br /> |VACUUM CUP MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |43055016<br /> |MOUNT-PIVOT-MAGNET<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |PT0470<br /> |BEARING-PIVOT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0525<br /> |BOLT-CARRIAGE-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |9<br /> |HW0524<br /> |BOLT-CARRIAGE-1/2-13 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |11<br /> |HW0008<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |16<br /> |-<br /> |12<br /> |43058009<br /> |PLATE-ROTATION STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |43058003<br /> |SLEEVE-STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |43058010<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |18<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |43037002-2<br /> |SUPPORT-CABLE RESTRAINT<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |21<br /> |E0334-6'<br /> |CORD-5 PIN FEMALE<br /> |<br /> |''With 72&quot; lead''<br /> |2<br /> |-<br /> |22<br /> |E1041<br /> |WIRE LOOM-SPIRAL-3/8&quot;<br /> |<br /> |''2 pieces at 24&quot; each''<br /> |48&quot;<br /> |-<br /> |23<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |2<br /> |-<br /> |24<br /> |43057037<br /> |INSULATOR-BOTTOM<br /> |<br /> |<br /> |2<br /> |-<br /> |25<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |26<br /> |41657008<br /> |SLIDE-MAGNET<br /> |<br /> |<br /> |2<br /> |-<br /> |27<br /> |HW0314<br /> |BOLT-FHSCS-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Assembly (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Assembly (Helical Actuator).png|alt=BE-TS Magnet Assembly (Helical Actuator)|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43032009<br /> |MAGNET ASSEMBLY<br /> |<br /> |''Includes Items 1 through 12''<br /> |A/R<br /> |-<br /> |1<br /> |N/A<br /> |ELECTROMAGNET-95VDC<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |E0314<br /> |SENSOR-PROXIMITY-30MM<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |41657002<br /> |COVER-PROXIMITY SENSOR HOUSING<br /> |<br /> |''Rear''<br /> |2<br /> |-<br /> |4<br /> |HW1065<br /> |SCREW-SHCS-#6-32 X 3/8&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW1066<br /> |WASHER-LOCK-#6<br /> |<br /> |<br /> |8<br /> |-<br /> |6<br /> |E0335<br /> |RECEPTACLE-5 PIN MALE<br /> |<br /> |''With 12&quot; lead''<br /> |2<br /> |-<br /> |7<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |E0376<br /> |INDICATOR LIGHT<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |9<br /> |41657003<br /> |COVER-PROXIMITY SENSOR HOUSING<br /> |80252015<br /> |''Front''<br /> |2<br /> |-<br /> |10<br /> |HW0138<br /> |SCREW-FHSCS-#8-32 X 3/8&quot;<br /> |80252015<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |80252014<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW1002<br /> |SPRING-1/2&quot;<br /> |80252014<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |80252014<br /> |<br /> |8<br /> |-<br /> |14<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |80252014<br /> |<br /> |4<br /> |-<br /> |15<br /> |E0336<br /> |METAL OXIDE VARISTOR<br /> |<br /> |''Not shown''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Extractors built or replacement magnets shipped prior to October 2021 used Multi-Piece Indicator Lights with replaceable bulb and lens and are no longer available. Current Indicator Light is a 1-Piece LED assembly. Replacement of any Multi-Piece component requires replacing entire assembly with current, 1-Piece Indicator Light.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Components (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Components (Helical Actuator).png|alt=BE-TS Magnet Components (Helical Actuator)|frameless|534x534px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43058021<br /> |STIFFENER PLATE-HELICAL SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43057051-2<br /> |STIFFENER-MAGNET-HELICAL SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |4<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |24<br /> |-<br /> |5<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |6<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |12<br /> |-<br /> |7<br /> |PL0307<br /> |INSULATOR-MALE STUD<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0106<br /> |WASHER-FLAT-5/16&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |HW0105<br /> |WASHER-LOCK-5/16&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0004<br /> |NUT-HEX-5/16-18<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |12<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |13<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |14<br /> |E1016<br /> |FUSE HOLDER<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |E0325<br /> |FUSE-7 AMP-250VAC<br /> |<br /> |''FLM-7 or FNM-7''<br /> |1<br /> |-<br /> |16<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |17<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Panel (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Panel (Helical Actuator).png|alt=BE-TS Magnet Panel (Helical Actuator)|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41637001<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41637002<br /> |WIRE WAY-SHORT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |41637003<br /> |WIRE WAY-LONG<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |41637004<br /> |TRACK-MOUNTING-SHORT<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |41637005<br /> |TRACK-MOUNTING-LONG<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> | rowspan=&quot;3&quot; |''Mounting track hardware (Not shown)''<br /> |10<br /> |-<br /> |7<br /> |HW0132<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |10<br /> |-<br /> |8<br /> |HW0133<br /> |NUT-NILN-#8-32<br /> |<br /> |16<br /> |-<br /> |9<br /> |E1020<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |12<br /> |-<br /> |10<br /> |E1040<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |E1330<br /> |END ANCHOR<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |E1009<br /> |RECTIFIER-FULL WAVE BRIDGE<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |HW0135<br /> |SCREW-RHMS-#8-32 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |E1313<br /> |SOCKET-RELAY-8 PIN<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |E0331<br /> |RELAY-DPDT-110VAC<br /> |<br /> |''With Indicator Light''<br /> |2<br /> |-<br /> |16<br /> |HW0139<br /> |SCREW-RHMS-#8-32 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Extended Reach Hydraulics (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== &lt;big&gt;''[Discontinued] Helical Actuator''&lt;/big&gt; ====<br /> [[File:BE-TS (Discontinued) Helical Actuator.png|alt=BE-TS (Discontinued) Helical Actuator|frameless|546x546px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43042009<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |H0010<br /> |FITTING-BULKHEAD-3/4-16 X #4 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |43055017<br /> |ELBOW-BULKHEAD<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> | rowspan=&quot;3&quot; |7<br /> |4-48-0402-0402<br /> |HYD HOSE-1/4&quot; X 48&quot; (BE-24 UNITS)<br /> |<br /> | rowspan=&quot;3&quot; |''Cylinder rod-end hose''<br /> | rowspan=&quot;3&quot; |1<br /> |-<br /> |4-54-0402-0402<br /> |HYD HOSE-1/4&quot; X 54&quot; (BE-36 UNITS)<br /> |<br /> |-<br /> |4-56-0402-0402<br /> |HYD HOSE-1/4&quot; X 56&quot; (BE-42 UNITS)<br /> |<br /> |-<br /> | rowspan=&quot;3&quot; |8<br /> |4-38-0402-0402<br /> |HYD HOSE-1/4&quot; X 38&quot; (BE-24 UNITS)<br /> |<br /> | rowspan=&quot;3&quot; |''Cylinder rod-end hose''<br /> | rowspan=&quot;3&quot; |1<br /> |-<br /> |4-44-0402-0402<br /> |HYD HOSE-1/4&quot; X 44&quot; (BE-36 UNITS)<br /> |<br /> |-<br /> |4-46-0402-0402<br /> |HYD HOSE-1/4&quot; X 46&quot; (BE-42 UNITS)<br /> |<br /> |-<br /> |9<br /> |41257035<br /> |STANDOFF-HOSE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW1093<br /> |CLAMP-CABLE-3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0311<br /> |BOLT-FHSCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> ==== &lt;big&gt;''[Current] Helical Actuator''&lt;/big&gt; ====<br /> [[File:BE-TS (Current) Helical Actuator.png|alt=BE-TS (Current) Helical Actuator|frameless|567x567px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43042013<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |H0010<br /> |FITTING-BULKHEAD-3/4-16 X #4 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |43055021<br /> |ELBOW-BULKHEAD<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> | rowspan=&quot;3&quot; |7<br /> |4-48-0402-0402<br /> |HYD HOSE-1/4&quot; X 48&quot; (BE-24 UNITS)<br /> |<br /> | rowspan=&quot;3&quot; |''Cylinder rod-end hose''<br /> | rowspan=&quot;3&quot; |1<br /> |-<br /> |4-54-0402-0402<br /> |HYD HOSE-1/4&quot; X 54&quot; (BE-36 UNITS)<br /> |<br /> |-<br /> |4-56-0402-0402<br /> |HYD HOSE-1/4&quot; X 56&quot; (BE-42 UNITS)<br /> |<br /> |-<br /> | rowspan=&quot;3&quot; |8<br /> |4-38-0402-0402<br /> |HYD HOSE-1/4&quot; X 38&quot; (BE-24 UNITS)<br /> |<br /> | rowspan=&quot;3&quot; |''Cylinder rod-end hose''<br /> | rowspan=&quot;3&quot; |1<br /> |-<br /> |4-44-0402-0402<br /> |HYD HOSE-1/4&quot; X 44&quot; (BE-36 UNITS)<br /> |<br /> |-<br /> |4-46-0402-0402<br /> |HYD HOSE-1/4&quot; X 46&quot; (BE-42 UNITS)<br /> |<br /> |-<br /> |9<br /> |41257035<br /> |STANDOFF-HOSE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW1093<br /> |CLAMP-CABLE-3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0311<br /> |BOLT-FHSCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Extended Reach (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== &lt;big&gt;'''''Non-Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator)'''''&lt;/big&gt; ====<br /> [[File:BE-TS Non-Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator).png|alt=BE-TS Non-Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator)|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41255005<br /> |ARM-EXTENSION<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41255004<br /> |HOUSING-EXTENDED REACH<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0416<br /> |CYLINDER-2 1/2&quot; X 12&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CYLINDER-REAR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-CYLINDER-ROD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JIC X # 6 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |28<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |28<br /> |-<br /> |15<br /> |41258002<br /> |PLATE-BEARING<br /> |80258001<br /> |''Side''<br /> |2<br /> |-<br /> |16<br /> |41258005<br /> |PLATE-SHIM<br /> |80258001<br /> |''Side''<br /> |2<br /> |-<br /> |17<br /> |41258003<br /> |PLATE-BEARING<br /> |80258001<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |18<br /> |41258004<br /> |PLATE-SHIM<br /> |80258001<br /> |''Upper / lower''<br /> |2<br /> |}<br /> &lt;big&gt;'''''Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator)'''''&lt;/big&gt;<br /> <br /> [[File:BE-TS Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator).png|alt=BE-TS Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator)|frameless|553x553px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055011<br /> |ARM-EXTENSION<br /> |<br /> |''Pivoting cup only''<br /> |1<br /> |-<br /> |2<br /> |43055012<br /> |HOUSING-EXTENDED REACH<br /> |<br /> |''Pivoting cup only''<br /> |1<br /> |-<br /> |3<br /> |HC0415<br /> |CYLINDER-2 1/2&quot; X 8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CYLINDER-REAR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-CYLINDER-ROD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JIC X # 6 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |24<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |24<br /> |-<br /> |15<br /> |43058013<br /> |PLATE-BEARING<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |16<br /> |43058016<br /> |PLATE-SHIM<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |17<br /> |43058014<br /> |PLATE-BEARING<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |18<br /> |43058015<br /> |PLATE-SHIM<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |19<br /> |HW1043<br /> |CLAMP-CYLINDER<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |43058019<br /> |SUPPORT-CABLE-BAND CLAMP<br /> |<br /> |<br /> |2<br /> |-<br /> |21<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |22<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |23<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |24<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Extended Reach (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== &lt;big&gt;'''''[Discontinued] Extended Reach Magnet Arm (Helical Actuator)'''''&lt;/big&gt; ====<br /> [[File:BE-TS (Discontinued) Extended Reach Magnet Arm (Helical Actuator).png|alt=BE-TS (Discontinued) Extended Reach Magnet Arm (Helical Actuator)|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055011<br /> |ARM-EXTENSION<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43055012<br /> |HOUSING-EXTENDED REACH<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0415<br /> |CYLINDER-2 1/2&quot; X 8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CYLINDER-REAR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-CYLINDER-ROD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JIC X # 6 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |24<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |24<br /> |-<br /> |15<br /> |43058013<br /> |PLATE-BEARING<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |16<br /> |43058016<br /> |PLATE-SHIM<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |17<br /> |43058014<br /> |PLATE-BEARING<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |18<br /> |43058015<br /> |PLATE-SHIM<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |19<br /> |HW1043<br /> |CLAMP-CYLINDER<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |43058019<br /> |SUPPORT-CABLE-BAND CLAMP<br /> |<br /> |<br /> |2<br /> |-<br /> |21<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |24<br /> |43057004-2<br /> |SUPPORT-CABLE-MAGNET<br /> |<br /> |<br /> |2<br /> |}<br /> &lt;big&gt;'''''[Current] Extended Reach Magnet Arm (Helical Actuator)'''''&lt;/big&gt;<br /> <br /> [[File:BE-TS (Current) Extended Reach Magnet Arm (Helical Actuator).png|alt=BE-TS (Current) Extended Reach Magnet Arm (Helical Actuator)|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |50055004<br /> |ARM-EXTENSION<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |50055005<br /> |HOUSING-EXTENDED REACH<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0415<br /> |CYLINDER-2 1/2&quot; X 8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CYLINDER-REAR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-CYLINDER-ROD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JIC X # 6 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |20<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |20<br /> |-<br /> |15<br /> |50058009<br /> |PLATE-BEARING<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |16<br /> |50058012<br /> |PLATE-SHIM<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |17<br /> |50058010<br /> |PLATE-BEARING<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |18<br /> |50058011<br /> |PLATE-SHIM<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |19<br /> |HW1043<br /> |CLAMP-CYLINDER<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |43058019<br /> |SUPPORT-CABLE-BAND CLAMP<br /> |<br /> |<br /> |2<br /> |-<br /> |21<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |24<br /> |43057004-2<br /> |SUPPORT-CABLE-MAGNET<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> == &lt;big&gt;Drive and Idler Wheels&lt;/big&gt; ==<br /> <br /> === &lt;big&gt;&lt;u&gt;Drive Wheel Mounting&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Drive Wheel Mounting.png|alt=BE-TS Drive Wheel Mounting|frameless|519x519px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0503<br /> |BOLT-HHCS-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |2<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |''Cylinder Bracket bolt only''<br /> |2<br /> |-<br /> |3<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> === &lt;big&gt;&lt;u&gt;Drive Wheel Motors&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Drive Wheel Motors.png|alt=BE-TS Drive Wheel Motors|frameless|535x535px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;2&quot; |1<br /> |43822001-6B<br /> |FLOOR DRIVE ASSEMBLY (W/ 200CC MOTOR)<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |43822004-6B<br /> |FLOOR DRIVE ASSEMBLY (W/ 400CC MOTOR)<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |2<br /> |43827004<br /> |PLATE-MOTOR MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0416<br /> |BOLT-SHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |H1612<br /> |ADAPTER-90 DEG-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |N/A<br /> |ROD-THREADED-1/2-13 X 7 3/4&quot;<br /> |<br /> |''†† See notes''<br /> |8<br /> |-<br /> |7<br /> |N/A<br /> |SPACER-DRIVE WHEEL-4.75&quot; LG<br /> |<br /> |''†† See notes''<br /> |8<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |43827006<br /> |SPACER-DRIVE WHEEL-4.125&quot; LG<br /> |<br /> |Must be ordered as a set of 4<br /> |8<br /> |-<br /> |11<br /> |HW0516<br /> |BOLT-HHCS-1/2-13 X 6 1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |12<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> | rowspan=&quot;2&quot; |13<br /> |N/A<br /> |MOTOR-HYDRAULIC-200CC<br /> |<br /> |''††† Keyed Shaft''<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |N/A<br /> |MOTOR-HYDRAULIC-400CC<br /> |<br /> |''††† Keyed Shaft''<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |14<br /> |HW1071<br /> |KEY-WOODRUFF-#808 STD<br /> |<br /> |<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |15<br /> |HC0124-6B<br /> |MOTOR-HYDRAULIC-200CC<br /> |<br /> |''† Spline Shaft''<br /> |2<br /> |-<br /> |HC0126-6B<br /> |MOTOR-HYDRAULIC-400CC<br /> |80322003<br /> |''† Spline Shaft''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† 200CC Motors required for units equipped with Parallel Drive Circuit.''<br /> ''400CC Motors required for units equipped with Series Drive Circuit.''<br /> <br /> ''See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Cross_Port_Relief Cross Port Relief] section to determine if unit is Parallel or Series equipped and approximate effectivity of each type.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Parts obsolete and no longer available. Must replace with Items 10 &amp; 11.''<br /> |-<br /> | colspan=&quot;6&quot; |''††† Parts obsolete and no longer available. Must replace with Spline Drive Conversion Kit.''<br /> |-<br /> | colspan=&quot;6&quot; |'''''NOTE:''' Effectivity dates refer to dates new extractor units are shipped from the factory. Replacement part effectivity &lt;u&gt;may&lt;/u&gt; differ due to factory inventory levels at time of parts order. Consult factory if unsure of parts needed.''<br /> |}<br /> <br /> === &lt;big&gt;&lt;u&gt;Drive Wheel Bearings&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Drive Wheel Bearings.png|alt=BE-TS Drive Wheel Bearings|frameless|537x537px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43825001<br /> |FRAME-FLOOR DRIVE<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |C0510-1<br /> |WHEEL-10&quot; X 5&quot;-POLY<br /> |80322001<br /> |<br /> |2<br /> |-<br /> |3<br /> |43822003<br /> |SHAFT-WHEEL (W/ COUPLING BODY)<br /> |<br /> |''Available in multiple kits''<br /> |2<br /> |-<br /> |4<br /> |43897004<br /> |KEY-3/8&quot; X 4 3/4&quot;<br /> |80322001<br /> |<br /> |2<br /> |-<br /> |5<br /> |PT0430<br /> |FLANGE BEARING-4 BOLT-1 1/2&quot;<br /> |80322001<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |7<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |16<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |9<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |16<br /> |-<br /> |10<br /> |PT0321<br /> |CHAIN-COUPLING-#50<br /> |<br /> |''Includes connecting pin''<br /> |2<br /> |-<br /> |11<br /> |N/A<br /> |COUPLING BODY-TAPER BORE-#50<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |12<br /> |N/A<br /> |BUSHING-TAPER LOCK-1&quot;<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |13<br /> |HW0323<br /> |BOLT-HHCS-5/16-18 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |14<br /> |PT0330<br /> |COUPLING BODY-#50-SPLINE BORE<br /> |80322003<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW1110<br /> |RETAINING RING-1 1/2&quot;-HEAVY DUTY<br /> |<br /> |''†† Available in multiple kits''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Parts obsolete and no longer available. Spline Drive Conversion Kit required. Reuse of bushing after disassembly not recommended.'' <br /> |-<br /> | colspan=&quot;6&quot; |''† † Retaining Rings used on units shipped after 7/01/12. Units shipped from 7/01/13 are equipped with (2) Retaining Rings per shaft - (1) on each side of the wheel. Units shipped after 11/01/13 are equipped with only (1) Snap Rings as shown. Second Snap Ring is no longer used or required.''<br /> |-<br /> | colspan=&quot;6&quot; |''NOTE: Effectivity dates refer to dates new extractor units are shipped from the factory. Replacement part effectivity &lt;u&gt;'''may'''&lt;/u&gt; differ due to factory inventory levels at time of parts order. Consult factory if unsure of parts needed.''<br /> |}<br /> <br /> === &lt;big&gt;&lt;u&gt;Drive Wheel Assembly&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Drive Wheel Assembly.png|alt=BE-TS Drive Wheel Assembly|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43822005<br /> |RADIAL PISTON DRIVE WHEEL ASSEMBLY<br /> |<br /> |''Includes Items 1 through 6''<br /> |2<br /> |-<br /> |1<br /> |43825003<br /> |RADIAL PISTON DRIVE WHEEL MOUNT<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0160-1<br /> |400CC RADIAL PISTON MOTOR<br /> |<br /> |''Includes nuts &amp; studs''<br /> |1<br /> |-<br /> |REF<br /> |HC0160-STUD<br /> |STUD-M14-1.5 X 46MM<br /> |<br /> |''Replacement motor stud''<br /> |A/R<br /> |-<br /> |REF<br /> |HC0160-NUT<br /> |NUT-FLANGED HEX-M14-1.5<br /> |<br /> |''Replacement motor nut''<br /> |A/R<br /> |-<br /> |3<br /> |C0511<br /> |WHEEL-POLY-10 X 5&quot;-FLANGE MOUNT<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |5<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |6<br /> |-<br /> |7<br /> |H1612<br /> |ADAPTER-H-90 DEG-#10 SAEM X #8 JICM<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |H1539<br /> |ADAPTER-#8 JIC X #6 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1586<br /> |ADAPTER-90 DEG-#8 JICSW X #6 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |H0801<br /> |TEE-H-#6 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H1501<br /> |ADAPTER-#8 JIC X #6 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |H0200<br /> |REDUCER-#6 NPT X #4 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |H0206<br /> |PLUG-#4 NPT<br /> |<br /> |''† Left Drive Wheel only''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Plug used on Left Drive Wheel Assembly only. Hose from Left Drive Wheel Assembly is connected to tee on Right Drive Wheel Assembly.'' <br /> |}<br /> <br /> === &lt;big&gt;&lt;u&gt;Idler Casters&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Idler Casters.png|alt=BE-TS Idler Casters|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |C0500-1<br /> |CASTER-RIGID-10&quot; X 5&quot;-POLY<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |3<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |<br /> |''For Cylinder Bracket position'' <br /> |2<br /> |-<br /> |4<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |16<br /> |-<br /> |5<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |6<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> == &lt;big&gt;Electrical&lt;/big&gt; ==<br /> <br /> === &lt;u&gt;&lt;big&gt;AC Power Stanchion&lt;/big&gt;&lt;/u&gt; ===<br /> <br /> ==== &lt;big&gt;''Aero-Motive Energy Rail''&lt;/big&gt; ====<br /> [[File:BE-TS Aero-Motive Energy Rail.png|alt=BE-TS Aero-Motive Energy Rail|frameless|536x536px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43835001<br /> |STANCHION-POWER<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0511<br /> |BOLT-HHCS-1/2-13 X 3 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |46837014-2<br /> |TOW ARM-COLLECTOR TROLLEY<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |46838015<br /> |SPACER BLOCK-TOW ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW1030<br /> |U-BOLT-3/8-16 X 2&quot; X 5&quot;-SQUARE BEND<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .625&quot; to .750&quot;''<br /> |1<br /> |-<br /> |13<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |HW1051<br /> |EYE BOLT-3/8-16 X 5 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0126<br /> |WASHER-FLAT-3/8&quot;-FENDER<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |BD0010<br /> |TROLLEY-ENERGY RAIL<br /> |<br /> | rowspan=&quot;2&quot; |''Aero-Motive Rail only''<br /> <br /> ''(orange housing color)''<br /> |1<br /> |-<br /> |19<br /> |BD0100<br /> |BRUSH-TROLLEY<br /> |<br /> |4<br /> |}<br /> <br /> ==== '''&lt;big&gt;''Vahle Energy Rail''&lt;/big&gt;''' ====<br /> [[File:BE-TS Vahle Energy Rail.png|alt=BE-TS Vahle Energy Rail|frameless|535x535px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1A<br /> |BD0031<br /> |TROLLEY-ENERGY RAIL, KSL<br /> |<br /> | rowspan=&quot;3&quot; |''† Vahle KSL Rail only''<br /> <br /> ''(green housing color)''<br /> |1<br /> |-<br /> |2A<br /> |BD0040<br /> |BRUSH-PHASE, KSL<br /> |<br /> |3<br /> |-<br /> |3A<br /> |BD0041<br /> |BRUSH-GROUND, KSL<br /> |<br /> |1<br /> |-<br /> |1B<br /> |BD0231<br /> |TROLLEY-ENERGY RAIL, KBH<br /> |<br /> | rowspan=&quot;3&quot; |''† Vahle KBH Rail only''<br /> <br /> ''(gray housing color)''<br /> <br /> ''(Nots shown)''<br /> |1<br /> |-<br /> |2B<br /> |BD0240<br /> |BRUSH-PHASE, KBH<br /> |<br /> |3<br /> |-<br /> |3B<br /> |BD0241<br /> |BRUSH-GROUND, KBH<br /> |<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |4<br /> |BD0030<br /> |TOW ARM-COLLECTOR TROLLEY, KSL<br /> |<br /> |''† Vahle KSL Rail only''<br /> <br /> ''(green housing color)''<br /> |1<br /> |-<br /> |BD0230<br /> |TOW ARM-COLLECTOR TROLLEY, KBH<br /> |<br /> |''† Vahle KBH Rail only''<br /> <br /> ''(gray housing color)''<br /> |1<br /> |-<br /> |5<br /> |46838015<br /> |SPACER-BLOCK-TOW ARM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |6<br /> |41237083-2<br /> |BRACKET-TOW ARM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |7<br /> |HW1054<br /> |U-BOLT-5/16-18 X 2&quot; X 5&quot;-SQUARE BEND<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW0323<br /> |BOLT-HHCS-5/16-18 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0106<br /> |WASHER-FLAT-5/16&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0150<br /> |WASHER-FLAT-5/16&quot;-FENDER<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0105<br /> |WASHER-LOCK-5/16&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0004<br /> |NUT-HEX-5/16-18<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Verify Energy Rail type (KSL OR KBH) by the color of the energy rail housing.'' <br /> |-<br /> | colspan=&quot;6&quot; |''†† Not all units equipped with Tow Arm Bracket. Location of Spacer Block and/or Tow Arm Bracket may vary from configuration shown.'' <br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Control Panel&lt;/big&gt;&lt;/u&gt;''' ===<br /> '''&lt;big&gt;''[Discontinued] Control Panel for Units with 10 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS (Discontinued) Control Panel for Units with 10HP.png|alt=BE-TS (Discontinued) Control Panel for Units with 10HP|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-CONTROL PANEL-16&quot; X 14&quot; X 6&quot;<br /> |<br /> |CONSULT FACTORY<br /> |1<br /> |-<br /> |2<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |Grip size .250&quot; to.375&quot;<br /> |1<br /> |-<br /> |6<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |Grip size .625&quot; to .750&quot;<br /> |2<br /> |-<br /> |7<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |Grip size .500&quot; to .625&quot;<br /> |2<br /> |-<br /> |8<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |''Not shown''<br /> |1<br /> |-<br /> |9<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |''Not shown''<br /> |4<br /> |}<br /> [[File:BE-TS (Discontinued) Control Panel for Units with 10HP Detail.png|alt=BE-TS (Discontinued) Control Panel for Units with 10HP Detail|frameless|556x556px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0640<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |BLANK PANEL WITHOUT HOLES<br /> |1<br /> |-<br /> |2<br /> |E0120<br /> |MAGNETIC STARTER-NEMA 1 3/4&quot;<br /> |<br /> |WITH OVERLOAD<br /> |1<br /> |-<br /> |3<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |<br /> |17<br /> |-<br /> |4<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |<br /> |17<br /> |-<br /> |5<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |17<br /> |-<br /> |6<br /> |E0207-1<br /> |TRANSFORMER<br /> |<br /> |480VAC TO 120VAC, 0.75 Kva<br /> |1<br /> |-<br /> |7<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |HW0003<br /> |NUT-NILN-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |E1023<br /> |WIREWAY<br /> |<br /> |SOLD BY LENGTH<br /> |A/R<br /> |-<br /> |11<br /> |E1024<br /> |MOUNTING TRACK<br /> |<br /> |SOLD BY LENGTH<br /> |A/R<br /> |-<br /> |12<br /> |E1020<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |16<br /> |-<br /> |13<br /> |E1040<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |E1330<br /> |END ANCHOR<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |E0341<br /> |GROUND LUG<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |E0902<br /> |FUSE-6A<br /> |<br /> |FLM-6<br /> |1<br /> |}<br /> <br /> ==== '''&lt;big&gt;''[Current] Control Panel for Units with 20 HP Power Unit''&lt;/big&gt;''' ====<br /> [[File:BE-TS (Current) Control Panel for Units with 20HP.png|alt=BE-TS (Current) Control Panel for Units with 20HP|frameless|601x601px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-24&quot; X 16&quot; X 6&quot;<br /> |<br /> |CONSULT FACTORY<br /> |1<br /> |-<br /> |2<br /> |E0123-1<br /> |HANDLE-DISCONNECT<br /> |<br /> |INCL. MOUNTING SCREWS<br /> |1<br /> |-<br /> |3<br /> |E0662<br /> |RESTRAINT-3/4&quot;-LIQUID TIGHT<br /> |<br /> |INCL. LOCKNUT<br /> |1<br /> |-<br /> |4<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |GRIP SIZE .500&quot; TO .625&quot;<br /> |2<br /> |-<br /> |5<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |GRIP SIZE .625&quot; TO .750&quot;<br /> |1<br /> |-<br /> |6<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |7<br /> |E0661<br /> |RESTRAINT-3/4&quot;-90 DEG-LIQUID TIGHT<br /> |<br /> |INCL. LOCKNUT<br /> |1<br /> |-<br /> |8<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |GRIP SIZE .250&quot; TO .375&quot;<br /> |1<br /> |-<br /> |9<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |GRIP SIZE .450&quot; TO .560&quot;<br /> |2<br /> |-<br /> |10<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |11<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |}<br /> [[File:BE-TS (Current) Control Panel for Units with 20HP Details.png|alt=BE-TS (Current) Control Panel for Units with 20HP Details|frameless|645x645px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |YE0506<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |''Blank panel without holes''<br /> |1<br /> |-<br /> |2<br /> |YE0205-1<br /> |SWITCH-DISCONNECT-80A<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43036007<br /> |SHAFT-DISCONNECT<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |YE0409<br /> |FUSE HOLDER-SINGLE POLE<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |E0914<br /> |FUSE-10A<br /> |<br /> |''FLM-10''<br /> |1<br /> |-<br /> |6<br /> |E0902<br /> |FUSE-6A<br /> |<br /> |''FLM-6''<br /> |1<br /> |-<br /> |7<br /> |E0903<br /> |FUSE-12A<br /> |<br /> |''FLM-12''<br /> |1<br /> |-<br /> |8<br /> |YE0402<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |17<br /> |-<br /> |9<br /> |YE0405<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |YE0406<br /> |END ANCHOR<br /> |<br /> |<br /> |6<br /> |-<br /> |11<br /> |E0136<br /> |FUSE HOLDER-3 POLE<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |YE0901<br /> |FUSE-40A<br /> |<br /> |JTD-40-ID<br /> |3<br /> |-<br /> |13<br /> |E1013<br /> |BASE-RELAY<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |E1012<br /> |RELAY-11 PIN<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |E0137<br /> |FUSE HOLDER-2 POLE<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |YE0902<br /> |FUSE-10A<br /> |<br /> |''KLDR-10''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |17<br /> |N/A<br /> |CONTACTOR, &quot;A40&quot; SERIES<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |E0132-1<br /> |CONTACTOR, &quot;AF38&quot; SERIES<br /> |80332009<br /> |<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |18<br /> |N/A<br /> |OVERLOAD, &quot;TA&quot; SERIES<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |E0131-1<br /> |OVERLOAD, &quot;TF&quot; SERIES<br /> |80332009<br /> |<br /> |1<br /> |-<br /> |19<br /> |E1023<br /> |WIREWAY<br /> |<br /> |''Sold by length''<br /> |A/R<br /> |-<br /> |20<br /> |E0908<br /> |MOUNTING RAIL<br /> |<br /> |''Sold by length''<br /> |A/R<br /> |-<br /> |21<br /> |E1070<br /> |GROUND BAR-4 POSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |22<br /> |E1071<br /> |GROUND BAR-7 POSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |23<br /> |HW1061<br /> |SCREW-RHMS-#8-32 X 1&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |24<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> | rowspan=&quot;3&quot; |''Track and Wireway mounting hardware (Not shown)''<br /> |14<br /> |-<br /> |25<br /> |HW0133<br /> |WASHER-FLAT-#8<br /> |<br /> |14<br /> |-<br /> |26<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |17<br /> |-<br /> |27<br /> |E0139<br /> |AUXILIARY CONTACT BLOCK<br /> |80332009<br /> |''†† See notes''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† &quot;A40&quot; Series Contactor and &quot;TA&quot; Series Overload no longer available as of mid-March 2022. Components must be replaced with current Overload &amp; Relay Kit 80332009.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Auxiliary contact Block required for units equipped with &quot;AF38&quot; Series Contactor &amp; &quot;TF&quot; Series Overload.''<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Transformer&lt;/big&gt;&lt;/u&gt;''' ===<br /> '''&lt;big&gt;''Transformer for Units with 20 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS Transformer for Units with 20HP.png|alt=BE-TS Transformer for Units with 20HP|frameless|554x554px]]<br /> <br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0220<br /> |TRANSFORMER<br /> |<br /> |''480VAC to 120VAC, 3kVA''<br /> |1<br /> |-<br /> |2<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |3<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |7<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |3<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;Operator Console&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Operator Console Electrical.png|alt=BE-TS Operator Console Electrical|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0327<br /> |KEYED ACTUATOR ASSEMBLY<br /> |<br /> |''Includes 2 Keys &amp; Contact Block'' <br /> |1<br /> |-<br /> |2<br /> |E0351<br /> |KEY-REPLACEMENT<br /> |<br /> |''Set of 2 Keys''<br /> |A/R<br /> |-<br /> |3<br /> |E0309-1<br /> |HOUR METER<br /> |<br /> |''† Includes mounting hardware''<br /> |1<br /> |-<br /> |4<br /> |N/A<br /> |SWITCH-SELECTOR-3 POSITION<br /> |<br /> |''ON-OFF-ON, †† See notes''<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |5<br /> |N/A<br /> |LEGEND PLATE-VACUUM<br /> |<br /> |''††† See notes''<br /> |1<br /> |-<br /> |N/A<br /> |LEGEND PLATE-MAGNET<br /> |<br /> |''††† See notes''<br /> |1<br /> |-<br /> |6<br /> |N/A<br /> |CONTACT BLOCK-N/O<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |7<br /> |N/A<br /> |CONTACT BLOCK-N/C<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |8<br /> |E1083<br /> |SWITCH-SELECTOR-3 POSITION<br /> |80232001<br /> |''OFF-ON-OFF''<br /> |1<br /> |-<br /> |9<br /> |E1080<br /> |CONTACT BLOCK-N/O &amp; N/C<br /> |80232001<br /> |<br /> |2<br /> |-<br /> |10<br /> |YE0311<br /> |SWITCH-EMERGENCY STOP<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |YE0407<br /> |LEGEND PLATE-EMERGENCY STOP<br /> |<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Current Hour Meter is 3-Bolt version. Replacement of 4-Bolt version will require new mounting holes to be drilled in dashboard.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Parts no longer available. Must order new Selector Switch Kit 80232001''<br /> |-<br /> | colspan=&quot;6&quot; |''††† Parts no longer available. See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Labels_&amp;_Placards Labels &amp; Placards] section for current Placards''<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;Foot Switch&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Foot Switch Electrical.png|alt=BE-TS Foot Switch Electrical|frameless|701x701px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0301-1<br /> |SWITCH-FOOT OPERATED<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .500&quot; to .625&quot;''<br /> |1<br /> |-<br /> |3<br /> |E0515<br /> |CORD-14-3-SO/SOW<br /> |<br /> |<br /> |9'<br /> |-<br /> |4<br /> |HC0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |''If equipped''<br /> |2<br /> |-<br /> |5<br /> |HC0103<br /> |WASHER-1/4&quot;-LOCK<br /> |<br /> |''If equipped''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Open-Style Switch is a direct replacement for discontinued, Covered-Style Switch.'' <br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''Gate Switch'''&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Gate Switch Electrical.png|alt=BE-TS Gate Switch Electrical|frameless|613x613px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0312<br /> |SWITCH-PUSH BUTTON<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43017041<br /> |MOUNT-GATE SWITCH<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW1077<br /> |SCREW-RHMS-#10-24 X 5/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0307<br /> |BOLT-SHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |PL0502<br /> |GROMMET-3/8&quot; I.D.<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |YE0305<br /> |SWITCH-ROLLER<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |SS0303<br /> |WASHER-FLAT-#8<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |SS0111<br /> |SCREW-SHCS-#8-32 X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |SS0203<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''Proximity Switch'''&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Proximity Switch Electrical.png|alt=BE-TS Proximity Switch Electrical|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0314<br /> |SENSOR-PROXIMITY-30MM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43017027-2<br /> |BRACKET-PROXIMITY SENSOR<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |6<br /> |43017037-2<br /> |ANGLE-PROXIMITY SENSOR TARGET<br /> |<br /> |''Rotary Actuator units'' <br /> |1<br /> |-<br /> |43017084-2<br /> |ANGLE-PROXIMITY SENSOR TARGET<br /> |<br /> |''Helical Actuator units'' <br /> |1<br /> |-<br /> |7<br /> |HW0341<br /> |BOLT-FHSCS-1/4-20 X 5/8&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''120V Receptacle'''&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS 120V-Receptacle.png|alt=BE-TS 120V Receptacle|frameless|544x544px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |3<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0650<br /> |RECEPTACLE-DUPLEX<br /> |<br /> |''† 20A''<br /> |1<br /> |-<br /> |5<br /> |E0651<br /> |COVER-RECEPTACLE-DUPLEX<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0655<br /> |RECEPTACLE-GFCI<br /> |<br /> |''20A''<br /> |1<br /> |-<br /> |7<br /> |E0656<br /> |COVER-RECEPTACLE-GFCI<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |E0654<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |E0657<br /> |COVER-RECEPTACLE-DUPLEX/GFCI<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |''Mounting hardware (Not shown)''<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† If Duplex Receptacle has Split Feed (1 set of black &amp; white wires for each plug), the Break-Off Fin must be removed prior to installation.'' <br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''Console Enclosure'''&lt;/big&gt;&lt;/u&gt; ===<br /> <br /> ==== '''&lt;big&gt;''[Discontinued] Operator Console Enclosure for Units with 10 HP Power Unit''&lt;/big&gt;''' ====<br /> [[File:BE-TS (Discontinued) Operator Console Enclosure for Units with 10 HP Power Unit.png|alt=BE-TS (Discontinued) Operator Console Enclosure for Units with 10 HP Power Unit|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-6&quot; X 6&quot; X 4 &quot;<br /> |<br /> |''Consult factory''<br /> |1<br /> |-<br /> |2<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |3<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |4<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |5<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |8<br /> |43817087-2<br /> |BRACKET-MOUNTING-ENCLOSURE<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> | rowspan=&quot;4&quot; |''Mounting bracket hardware (Not shown)''<br /> |2<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |2<br /> |}<br /> '''&lt;big&gt;''[Discontinued] Operator Console Enclosure Panel for Units with 10 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS (Discontinued) Operator Console Enclosure Panel for Units with 10 HP Power Unit.png|alt=BE-TS (Discontinued) Operator Console Enclosure Panel for Units with 10 HP Power Unit|frameless|566x566px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0639<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |''Without holes''<br /> |1<br /> |-<br /> |2<br /> |E1024<br /> |TRACK-TERMINAL BLOCK<br /> |<br /> |''4 7/8&quot; LG''<br /> |1<br /> |-<br /> |3<br /> |E1020<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |9<br /> |-<br /> |4<br /> |E1330<br /> |END ANCHOR<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |E1040<br /> |END BARRIER<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0341<br /> |GROUND LUG<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |''2 for track mounting''<br /> |3<br /> |-<br /> |8<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |''2 for track mounting''<br /> |3<br /> |-<br /> |9<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |''2 for track mounting''<br /> |3<br /> |}<br /> '''&lt;big&gt;''[Current] Operator Console Enclosure for Units with 20 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS (Current) Operator Console Enclosure for Units with 20 HP Power Unit.png|alt=BE-TS (Current) Operator Console Enclosure for Units with 20 HP Power Unit|frameless|549x549px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-8&quot; X 8&quot; X 4&quot;<br /> |<br /> |''Consult factory''<br /> |1<br /> |-<br /> |2<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |3<br /> |-<br /> |3<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .625&quot; to .750&quot;''<br /> |1<br /> |-<br /> |4<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''† Grip size .450&quot; to .560&quot;''<br /> |4<br /> |-<br /> |5<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''†'' ''Grip size .250&quot; to .375&quot;''<br /> |4<br /> |-<br /> |6<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |11<br /> |-<br /> |7<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |E1349<br /> |SEAL-KNOCKOUT-1/2&quot;<br /> |<br /> |''† See notes''<br /> |A/R<br /> |-<br /> |9<br /> |43037003-2<br /> |BRACKET-MOUNTING-ENCLOSURE<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> | rowspan=&quot;4&quot; |''Mounting bracket hardware (Not shown)''<br /> |2<br /> |-<br /> |12<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |2<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Restraints sold for machines equipped with all available options. Machines built without certain options will have Knockout Seals (Item #8) installed in place of restraints.''<br /> |}<br /> '''&lt;big&gt;''[Current] Operator Console Enclosure Panel for Units with 20 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS (Current) Operator Console Enclosure Panel for Units with 20 HP Power Unit.png|alt=BE-TS (Current) Operator Console Enclosure Panel for Units with 20 HP Power Unit|frameless|527x527px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0135<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |''Blank panel without holes''<br /> |1<br /> |-<br /> |2<br /> |E0908<br /> |MOUNTING RAIL<br /> |<br /> |''Sold by length''<br /> |A/R<br /> |-<br /> |3<br /> |YE0402<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |14<br /> |-<br /> |4<br /> |YE0405<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |YE0406<br /> |END ANCHOR<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |E1074<br /> |JUMPER-2 POLE<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |E0130<br /> |GROUND BAR-7 POSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW1061<br /> |SCREW-RHMS-#8-32 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> | rowspan=&quot;3&quot; |''Track and Wireway mounting hardware (Not shown)''<br /> |2<br /> |-<br /> |10<br /> |HW0133<br /> |WASHER-FLAT-#8<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |4<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''Junction Box'''&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Junction Box.png|alt=BE-TS Junction Box|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |2<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |3<br /> |-<br /> |3<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .500&quot; to .625&quot;''<br /> |4<br /> |-<br /> |4<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .625&quot; to .750&quot;''<br /> |2<br /> |-<br /> |5<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Top Module Junction Box&lt;/big&gt;''''' ====<br /> [[File:BE-TS Junction Box.png|alt=BE-TS Junction Box|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1329<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0662<br /> |RESTRAINT-3/4&quot;-LIQUID TIGHT<br /> |<br /> |''Includes Locknut'' <br /> |1<br /> |-<br /> |3<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .625&quot; to .750&quot;''<br /> |1<br /> |-<br /> |4<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Wiring Diagrams&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;BE-TS with 10 HP Motor Wiring Diagram&lt;/big&gt;''''' ====<br /> [[File:BE-TS Wiring Diagram-10HP Motor.png|alt=BE-TS Wiring Diagram-10HP Motor|frameless|800x800px]]<br /> <br /> ==== '''''&lt;big&gt;BE-TS with Magnet and 10 HP Motor Wiring Diagram&lt;/big&gt;''''' ====<br /> [[File:BE-TS with Magnet and 10HP Motor Wiring Diagram.png|alt=BE-TS with Magnet and 10HP Motor Wiring Diagram|frameless|800x800px]]<br /> <br /> ==== '''''&lt;big&gt;BE-TS with Magnet and 20 HP Motor Wiring Diagram&lt;/big&gt;''''' ====<br /> [[File:BE-TS Magnet Wiring Diagram-20HP Motor.png|alt=BE-TS Magnet Wiring Diagram-20HP Motor|frameless|800x800px]]<br /> <br /> [[File:BE-TS Magnet Wiring Diagram-20HP Motor-02.png|alt=BE-TS Magnet Wiring Diagram-20HP Motor-02|frameless|800x800px]]<br /> <br /> [[File:BE-TS Magnet Wiring Diagram-20HP Motor-03.png|alt=BE-TS Magnet Wiring Diagram-20HP Motor-03|frameless|800x800px]]<br /> <br /> [[File:BE-TS Magnet Wiring Diagram-20HP Motor-04.png|alt=BE-TS Magnet Wiring Diagram-20HP Motor-04|frameless|800x800px]]<br /> <br /> == &lt;big&gt;Hydraulics&lt;/big&gt; ==<br /> <br /> === '''&lt;big&gt;&lt;u&gt;[Discontinued] 10 HP Power Unit&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:(Discontinued) BE-TS Power Unit (10HP).png|alt=(Discontinued) BE-TS Power Unit (10HP)|frameless|553x553px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0011<br /> |MOTOR-ELECTRIC-10HP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0326<br /> |ADAPTER-PUMP TO MOTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0325<br /> |PUMP-VANE-16 GPM<br /> |<br /> |''Variable displacement''<br /> |1<br /> |-<br /> |4<br /> |HC0327<br /> |COUPLING BODY-1 3/8&quot;<br /> |<br /> |''Motor end''<br /> |1<br /> |-<br /> |5<br /> |HC0329<br /> |SPIDER-COUPLING INSERT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HC0328<br /> |COUPLING BODY-7/8&quot;<br /> |<br /> |''Pump end''<br /> |1<br /> |-<br /> |7<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1 1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H1549<br /> |ADAPTER-#20 JICM X #24 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |H1595<br /> |ADAPTER-90 DEG-#20 JICM X #20 JICSW<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |H1609<br /> |ADAPTER-90 DEG-#12 JICM X #16 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |H1522<br /> |ADAPTER-#12 JICSW X #12 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |HC0260<br /> |VALVE-MAIN SYSTEM RELIEF<br /> |<br /> |<br /> |1<br /> |-<br /> |15a<br /> |43846003<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''†† For Item 15 (Not shown)''<br /> |A/R<br /> |-<br /> |16<br /> |HC0318<br /> |GAUGE-PRESSURE<br /> |<br /> |<br /> |1<br /> |-<br /> |17<br /> |H0206<br /> |PLUG-#4 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |H1108<br /> |ADAPTER-#10 JICM X #12 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |H1522<br /> |ADAPTER-#12 JICSW X #12 SAEM<br /> |<br /> |''† See note''<br /> |1<br /> |-<br /> |20<br /> |H1542<br /> |ADAPTER-#12 JICM X #12 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |21<br /> |HC0280<br /> |VALVE-CHECK<br /> |<br /> |''† See note''<br /> |1<br /> |-<br /> |22<br /> |H1542<br /> |ADAPTER-#12 JICM X #12 SAEM<br /> |<br /> |''† See note''<br /> |1<br /> |-<br /> |23<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .500&quot; to .625&quot;''<br /> |1<br /> |-<br /> |23a<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |''For Item 23 (Not shown)''<br /> |1<br /> |-<br /> |24<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |25<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |26<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |27<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Parts noted used on units built after April 2001.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Cartridges are for replacement only.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;[Discontinued] 30 Gallon Reservoir&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:(Discontinued) BE-TS 30 Gallon Reservoir.png|alt=(Discontinued) BE-TS 30 Gallon Reservoir|frameless|542x542px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43842001<br /> |RESERVOIR-VERTICAL-30 GAL<br /> |<br /> |''Includes Items 1 through 8''<br /> |1<br /> |-<br /> |1<br /> |HC0542<br /> |GASKET-CHANNEL<br /> |<br /> |''Sold by length''<br /> |7'<br /> |-<br /> |2<br /> |HC0340<br /> |GAUGE-SIGHT<br /> |<br /> |''with Thermometer''<br /> |1<br /> |-<br /> |3<br /> |HC0306<br /> |STRAINER-SUCTION<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HC0308<br /> |FILLER/BREATHER ASSEMBLY<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0209<br /> |SCREW-RHMS-10-32 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |BI0110<br /> |ELBOW-STR-90 DEG-#16 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |8<br /> |H0208<br /> |PLUG-#12 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1590<br /> |ADAPTER-90 DEG-#16 JICM X #16 FNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |BI0102<br /> |ELBOW-#12 FNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |BI0020<br /> |NIPPLE-#12 NPT X 3&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |BI0301<br /> |TEE-#12 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |H1502<br /> |ADAPTER-#8 JICM X #12 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |BI0002<br /> |NIPPLE-CLOSE-#12 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HC0307<br /> |RETURN LINE FILTER ASSEMBLY<br /> |<br /> |''Housing and Filter''<br /> |1<br /> |-<br /> |16<br /> |HC0317<br /> |FILTER-RETURN LINE<br /> |<br /> |''Replacement filter''<br /> |1<br /> |-<br /> |17<br /> |H1509<br /> |ADAPTER-#10 JICM X #12 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> | rowspan=&quot;4&quot; |''Mounting hardware''<br /> <br /> ''(Not shown)''<br /> |4<br /> |-<br /> |19<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |8<br /> |-<br /> |20<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |4<br /> |-<br /> |21<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;[Current] Power Unit (20 HP)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:(Current) BE-TS 30 Power Unit (20 HP).png|alt=(Current) BE-TS 30 Power Unit (20 HP)|frameless|531x531px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0040<br /> |MOTOR-ELECTRIC-20 HP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0357<br /> |ADAPTER-PUMP TO MOTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0356<br /> |PUMP-PISTON-71CC<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HC0358-M<br /> |COUPLING BODY-M300-1 5/8&quot; BORE<br /> |<br /> |''MOTOR SIDE''<br /> |1<br /> |-<br /> |5<br /> |HC0358-I<br /> |SPIDER-COUPLING INSERT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HC0358-P<br /> |COUPLING BODY-M300-1 1/4&quot; BORE<br /> |<br /> |''PUMP SIDE''<br /> |1<br /> |-<br /> |7<br /> |HW0602<br /> |BOLT-HHCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0113<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |H1604<br /> |ADAPTER-90 DEG-#12 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HC0363<br /> |ADAPTER-FLANGE-#32 NPT<br /> |<br /> |''Includes O-ring''<br /> |1<br /> |-<br /> |11<br /> |HC0240<br /> |BLOCK-CHECK VALVE<br /> |<br /> |''Includes Cartridge &amp; O-ring''<br /> |1<br /> |-<br /> |12<br /> |N/A<br /> |CARTRIDGE-CHECK VALVE<br /> |<br /> |''† Replacement cartridge''<br /> |A/R<br /> |-<br /> |13<br /> |H0300<br /> |ELBOW-STR-90 DEG-#4 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |HC0318<br /> |GAUGE-PRESSURE<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |HE0704<br /> |ADAPTER-SPLIT FLANGE-1&quot;<br /> |<br /> |''2-Piece adapter with O-ring''<br /> |1<br /> |-<br /> |16<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |H0211<br /> |ADAPTER-#24 NPT X #12<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |E0661<br /> |RESTRAINT-3/4&quot;-90 DEG-LIQUID TIGHT<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |HW0513<br /> |BOLT-HHCS-1/2-13 X 2 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |20<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |21<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTE<br /> |-<br /> | colspan=&quot;6&quot; |''† Consult factory''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;[Current] 45 Gallon Reservoir&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:(Current) BE-TS 45 Gallon Reservoir.png|alt=(Current) BE-TS 45 Gallon Reservoir|frameless|547x547px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43842010<br /> |45 GAL RESERVOIR ASSEMBLY<br /> |<br /> |''Includes Items 1 through 7''<br /> |A/R<br /> |-<br /> |1<br /> |43848005<br /> |PLATE-COVER<br /> |<br /> |''† See note''<br /> |1<br /> |-<br /> |2<br /> |HC0308<br /> |FILLER/BREATHER ASSEMBLY<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0209<br /> |SCREW-RHMS-10-32 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |4<br /> |HC0340<br /> |GAUGE-SIGHT<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H0208<br /> |PLUG-#12 NPT<br /> |<br /> |''Non-IIoT equipped units only''<br /> |1<br /> |-<br /> |6<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |7<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |8<br /> |HC0361<br /> |HOUSING-FILTER<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HC0354<br /> |CARTRIDGE-FILTER<br /> |<br /> |''10 Micron filtration''<br /> |1<br /> |-<br /> |10<br /> |HC0362<br /> |FLANGE-SUCTION TUBE<br /> |<br /> |''Includes hardware''<br /> |1<br /> |-<br /> |11<br /> |43848008<br /> |TUBE-SUCTION<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |H1569<br /> |ADAPTER-45 DEG-#12 JICM X #12 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |H0202<br /> |REDUCER-#24 SAE X #12 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |H1622<br /> |ADAPTER-90 DEG-#12 SAEM X #12 JICM<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |H1644<br /> |PLUG-#24 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |H1610<br /> |ADAPTER-45 DEG-#12 JICSW X #12 JICM<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |PB0311-1<br /> |NIPPLE-#12 NPT X 2&quot;-BRASS<br /> |<br /> | rowspan=&quot;3&quot; |''†† See notes''<br /> |1<br /> |-<br /> |20<br /> |BI0301<br /> |TEE-#12 FNPT<br /> |<br /> |1<br /> |-<br /> |21<br /> |H1502<br /> |ADAPTER-#8 JICM X #12 MNPT<br /> |<br /> |2<br /> |-<br /> |22<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> | rowspan=&quot;5&quot; |''Reservoir mounting hardware'' <br /> <br /> ''(Not shown)''<br /> |2<br /> |-<br /> |23<br /> |HW0405<br /> |BOLT-HHCS-3/8-16 X 2&quot;<br /> |<br /> |2<br /> |-<br /> |24<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |8<br /> |-<br /> |25<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |4<br /> |-<br /> |26<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† RVT silicone required to seal cover plate after removal.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Components required for units equipped with radial piston drive wheel motors plumbed with case drain hoses. See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Drive_Wheel_Assembly Drive Wheel Assembly] section.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Valve Assembly&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Lift Valve and Manifold Detail&lt;/big&gt;''''' ====<br /> [[File:BE-TS Lift Valve and Manifold.png|alt=BE-TS Lift Valve and Manifold|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |80342001<br /> |LEVER VALVE RETRO KIT<br /> |<br /> |''† Required prior to 2006'' <br /> |A/R<br /> |-<br /> |1<br /> |HC0257<br /> |VALVE-LEVER<br /> |<br /> |''Effective from 2006 to Present''<br /> |1<br /> |-<br /> |2<br /> |HC0252<br /> |MANIFOLD-D05-1 BANK<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0318<br /> |BOLT-SHCS-1/4-20 X 1 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |H1642<br /> |PLUG-#12 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H1542<br /> |ADAPTER-#12 JICM X #12 SAEM<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HC0248<br /> |FIXED FLOW REGULATOR<br /> |<br /> |''††14 GPM''<br /> |1<br /> |-<br /> |12<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |13<br /> |H1540<br /> |ADAPTER-#8 JICM X #8 SAEM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |14<br /> |43817085<br /> |PLATE-ADAPTER-VALVE<br /> |<br /> |''† Not shown''<br /> |1<br /> |-<br /> |15<br /> |SS0104<br /> |BOLT-SHCS-1/4-20 X 5/8&quot;-SST<br /> |<br /> |''† Not shown''<br /> |4<br /> |-<br /> |16<br /> |SS0300<br /> |WASHER-FLAT-1/4&quot;-SAE-SST<br /> |<br /> |''† Not shown''<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |<br /> |-<br /> | colspan=&quot;6&quot; |''† Kit includes Items 1 &amp; 14 through 16. Minor modifications to the dash board required.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† For units shipped April 2017 to present''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Floor Drive / Arm Rotation Valve and Manifold Detail&lt;/big&gt;''''' ====<br /> [[File:BE-TS Floor Drive-Arm Rotation Valve and Manifold.png|alt=BE-TS Floor Drive-Arm Rotation Valve and Manifold|frameless|570x570px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0233<br /> |VALVE-LEVER<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HC0251<br /> |MANIFOLD-D03-2 BANK<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1545<br /> |ADAPTER-#10 JICM X #10 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |H1600<br /> |ADAPTER-90 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |H1587<br /> |ADAPTER-#6 JICSW X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HC0211<br /> |VALVE-ADJUSTABLE FLOW CONTROL<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |H1504<br /> |ADAPTER-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |H1640<br /> |PLUG-#6 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |43817033-2<br /> |RISER PLATE<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |14<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |HC0233-SK<br /> |SEAL KIT<br /> |<br /> |''For Item 1 (Not shown)''<br /> |A/R<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Valve Assembly&lt;/big&gt;''''' ====<br /> [[File:BE-TS Valve Assembly.png|alt=BE-TS Valve Assembly|frameless|538x538px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0233<br /> |VALVE-LEVER<br /> |<br /> |<br /> |3<br /> |-<br /> |2<br /> |HC0250<br /> |MANIFOLD-D03-3 BANK<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1610<br /> |ADAPTER-90 DEG-#10 JICM X #10 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |H1641<br /> |PLUG-#10 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H1000<br /> |ADAPTER-#8 SAEM X #4 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |H0001<br /> |NIPPLE-#4 NPT<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HC0247<br /> |FIXED FLOW REGULATOR-2.25 GPM<br /> |<br /> |''† See notes''<br /> |4<br /> |-<br /> |8<br /> |H1504<br /> |ADAPTER-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |H1640<br /> |PLUG-#6 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |H1540<br /> |ADAPTER-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |43817034-2<br /> |RISER PLATE<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |14<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |15<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HC0233-SK<br /> |SEAL KIT<br /> |<br /> |''For Item 1 (Not shown)''<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Units built prior to January 2107 equipped with Adjustable Flow Controls. Fixed Flow Regulators are direct replacement for Adjustable Flow Controls.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Lift Cylinder&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Lift Cylinder.png|alt=BE-TS Lift Cylinder|frameless|582x582px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43822006<br /> |CLEVIS ASSEMBLY<br /> |<br /> |''Sold as assembly only''<br /> |4<br /> |-<br /> |2<br /> |HW0813<br /> |SCREW-SHSS-3/8-16 X 1/2&quot;<br /> |<br /> |''Nylon tipped''<br /> |8<br /> |-<br /> |3<br /> |HC0420<br /> |CYLINDER-LIFT<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |H1645<br /> |ADAPTER-90 DEG-#8 SAEM X #6 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |H0212<br /> |ADAPTER-#6 NPT X #8 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HC0425<br /> |VELOCITY FUSE<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Lift Circuit&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Lift Circuit.png|alt=BE-TS Lift Circuit|frameless|553x553px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43017014-2<br /> |SUPPORT-PILOT DOWN MANIFOLD<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43718008<br /> |STANDOFF<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0315<br /> |BOLT-HHCS-1/4-20 X 4 1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |10<br /> |-<br /> |7<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |5<br /> |-<br /> |8<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |5<br /> |}<br /> <br /> ==== '''''&lt;big&gt;[Discontinued] Lift Circuit Configuration&lt;/big&gt;''''' ====<br /> [[File:(Discontinued) BE-TS Lift Circuit Configuration.png|alt=(Discontinued) BE-TS Lift Circuit Configuration|frameless|507x507px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |H1507<br /> |ADAPTER-#8 JICM X #8 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0264<br /> |VALVE-CHECK-PILOT TO OPEN<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H1621<br /> |ADAPTER-#4 SAEM X #2 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HC0269<br /> |VALVE-ADJUSTABLE FLOW CONTROL<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |H1591<br /> |ADAPTER-90 DEG-#6 JICM X #2 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |H1587<br /> |ADAPTER-#6 JICSW X #4 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1501<br /> |ADAPTER-#8 JICM X #6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43047002<br /> |MANIFOLD-PILOT DOWN<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> ==== '''''&lt;big&gt;[Current] Lift Circuit Configuration&lt;/big&gt;''''' ====<br /> [[File:(Current) BE-TS Lift Circuit Configuration.png|alt=(Current) BE-TS Lift Circuit Configuration|frameless|534x534px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0215<br /> |VALVE-CHECK-CARTRIDGE<br /> |<br /> |<br /> |8<br /> |-<br /> |2<br /> |H1560<br /> |ADAPTER-45 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |H1670<br /> |ADAPTER-45 DEG-#12 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |H1612<br /> |ADAPTER-90 DEG-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HC0283<br /> |VALVE-COUNTER BALANCE<br /> |<br /> |''Includes cartridge''<br /> |1<br /> |-<br /> |6<br /> |43846004<br /> |CARTRIDGE-COUNTER BALANCE<br /> |<br /> |''Replacement cartridge''<br /> |A/R<br /> |-<br /> |7<br /> |H1552<br /> |ADAPTER-#6 JICM X #6 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |H1587<br /> |ADAPTER-#6 JICSW X #4 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1501<br /> |ADAPTER-#8 JICM X #6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43047002<br /> |MANIFOLD-PILOT DOWN<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Cartridges are for replacement only''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Down-Speed Flow Control&lt;/big&gt;''''' ====<br /> [[File:BE-TS Down-Speed Flow Control.png|alt=BE-TS Down-Speed Flow Control|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0270<br /> |VALVE-ADJUSTABLE FLOW CONTROL<br /> |<br /> |''Pressure compensated''<br /> |1<br /> |-<br /> |2<br /> |H0007<br /> |NIPPLE-#8 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1647<br /> |ADAPTER-90 DEG-#10 SAEM X #8 FNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |H1680<br /> |ADAPTER-#10 JICM X #8 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H1690<br /> |ADAPTER-#10 JICSW X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HC0248<br /> |FIXED FLOW REGULATOR<br /> |<br /> |''14 GPM''<br /> |1<br /> |-<br /> |7<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |H1612<br /> |ADAPTER-90 DEG-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1547<br /> |ADAPTER-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Cross Port Relief&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Mounting Configuration&lt;/big&gt;''''' ====<br /> [[File:BE-TS Cross Port Relief Mounting Configuration.png|alt=BE-TS Cross Port Relief Mounting Configuration|frameless|546x546px]]<br /> {| class=&quot;wikitable&quot;<br /> ! colspan=&quot;6&quot; |UNITS BUILT PRIOR TO SEPTEMBER, 2014<br /> |-<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> ! colspan=&quot;6&quot; |UNITS BUILT SEPTEMBER, 2014 TO DECEMBER, 2014<br /> |-<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW0305<br /> |BOLT-HHCS-1/4-20 X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |7<br /> |43058004<br /> |PLATE-SPACER<br /> |<br /> |<br /> |1<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> ! colspan=&quot;6&quot; |UNITS BUILT DECEMBER, 2014 TO PRESENT<br /> |-<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |2<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |}<br /> ''NOTE: Effectivity dates refer to dates new extractor units shipped from the factory. Replacement part effectivity may differ due to factory inventory levels at time of parts order. Consult factory if unsure of parts needed.''<br /> <br /> ==== '''''&lt;big&gt;Components&lt;/big&gt;''''' ====<br /> [[File:BE-TS Cross Port Relief Components.png|alt=BE-TS Cross Port Relief Components|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0262<br /> |VALVE-CROSS PORT RELIEF<br /> |<br /> |''Includes cartridges''<br /> |1<br /> |-<br /> |2<br /> |43046002<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''For Item 1''<br /> |A/R<br /> |-<br /> |3<br /> |H1540<br /> |ADAPTER-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |H1507<br /> |ADAPTER-#8 JICM X #8 MNPT<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |HC0239<br /> |VALVE-ADJUSTABLE FLOW CONTROL<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |H1568<br /> |ADAPTER-45 DEG-#8 JICM X #8 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |H1646<br /> |ADAPTER-90 DEG-#8 SAEM X #6 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |H0805<br /> |TEE-#6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HC0273<br /> |REGULATOR-FIXED FLOW<br /> |<br /> |''7.0 GPM''<br /> |4<br /> |-<br /> |11<br /> |H1501<br /> |ADAPTER-#8 JICM X #6 MNPT<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Floor Drive Cutout&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Floor Drive Cutout.png|alt=BE-TS Floor Drive Cutout|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |SOLENOID-DRIVE CUTOUT<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |7<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |BI0001<br /> |NIPPLE-CLOSE-#8 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |N/A<br /> |SOLENOID-DRIVE CUTOUT<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |10<br /> |YE0501<br /> |CONNECTOR-SOLENOID<br /> |<br /> |''DIN 43650''<br /> |1<br /> |-<br /> |11<br /> |43058004<br /> |PLATE-SPACER<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |HC0278-TS/QS<br /> |SOLENOID-DRIVE CUTOUT<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |H1547<br /> |ADAPTER-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |H1612<br /> |ADAPTER-90 DEG-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Part obsolete. Must be replaced with Retro Kit Part # 80242007.''<br /> |-<br /> | colspan=&quot;6&quot; |''NOTE: Effectivity dates refer to dates new extractor units shipped from the factory. Replacement part effectivity may differ due to factory inventory levels at time of parts order. Consult factory if unsure of parts needed.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Counter Balance Valve&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Counter Balance Valve.png|alt=BE-TS Counter Balance Valve|frameless|554x554px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0263<br /> |VALVE-COUNTER BALANCE<br /> |<br /> |<br /> |1<br /> |-<br /> |1a<br /> |43046004<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''† For Item 1 (Not shown)''<br /> |A/R<br /> |-<br /> |2<br /> |H1615<br /> |ADAPTER-90 DEG-#6 JICM X #6 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |H1552<br /> |ADAPTER-#6 JICM X #6 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0305<br /> |BOLT-HHCS-1/4-20 X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Cartridges are for replacement only''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Transition Plate&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Transition Plate.png|alt=BE-TS Transition Plate|frameless|576x576px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817067-2<br /> |PLATE-TRANSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |H0020<br /> |UNION-BULKHEAD-45 DEG-#6 JICM<br /> |<br /> |<br /> |8<br /> |-<br /> |3<br /> |H0021<br /> |NUT-BULKHEAD-#6 JIC<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Return Line Manifold&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Return Line Manifold.png|alt=BE-TS Return Line Manifold|frameless|555x555px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43847001<br /> |MANIFOLD-RETURN LINE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |H1501<br /> |ADAPTER-#8 JICM X #6 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1503<br /> |ADAPTER-#12 JICM X #12 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |43817069-2<br /> |BRACKET-BULKHEAD<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |H0015<br /> |UNION-BULKHEAD-90 DEG-#12 JICM<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H0016<br /> |NUT-BULKHEAD-#12 JIC<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;EQ Chain Hose Guard&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS EQ Chain Hose Guard.png|alt=BE-TS EQ Chain Hose Guard|frameless|577x577px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43017074-2<br /> |GUARD-HOSE-EQ CHAIN<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Used on units manufactured after May 2015.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Hydraulic Schematics&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Hydraulic Schematic.png|alt=BE-TS Hydraulic Schematic|frameless|1180x1180px]]<br /> <br /> ==== '''''&lt;big&gt;Extended Reach Hydraulic Schematics&lt;/big&gt;''''' ====<br /> [[File:BE-TS Hydraulic Schematic Extended Reach.png|alt=BE-TS Hydraulic Schematic Extended Reach|frameless|905x905px]]<br /> <br /> == &lt;big&gt;Standard Available Options&lt;/big&gt; ==<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Strobe &amp; Alarm&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''&lt;big&gt;''[Discontinued] Strobe Light &amp; Stanchion Configuration''&lt;/big&gt;''' ====<br /> [[File:(Discontinued) BE-TS Strobe Light.png|alt=(Discontinued) BE-TS Strobe Light|frameless|722x722px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0317<br /> |STROBE LIGHT<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41215014<br /> |STANCHION<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0401<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |E1010<br /> |RECEPTACLE-TWIST LOCK<br /> |<br /> |''(Not shown)''<br /> |1<br /> |-<br /> |7<br /> |E1011<br /> |PLUG-TWIST LOCK<br /> |<br /> |''(Not shown)''<br /> |1<br /> |}<br /> <br /> ==== '''&lt;big&gt;''[Discontinued] Audible Alarm Configuration''&lt;/big&gt;''' ====<br /> [[File:(Discontinued) BE-TS Audible Alarm.png|alt=(Discontinued) BE-TS Audible Alarm|frameless|490x490px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0317-A<br /> |AUDIBLE ALARM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0654<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |00117101-2<br /> |MOUNTING BRACKET<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |5<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> ==== '''&lt;big&gt;''[Current] Stack Light Strobe &amp; Alarm Configuration''&lt;/big&gt;''' ====<br /> [[File:(Current) BE-TS Stack Light Strobe and Alarm Configuration.png|alt=(Current) BE-TS Stack Light Strobe and Alarm Configuration|frameless|844x844px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0362<br /> |MOUNTING BASE<br /> |<br /> |''Includes restraints''<br /> |1<br /> |-<br /> |2<br /> |E0365<br /> |TERMINAL BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0363<br /> |STROBE LIGHT-AMBER-120VAC<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |4<br /> |E0364<br /> |AUDIBLE ALARM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |5<br /> |SS0118<br /> |SCREW-SHCS-#8-32 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |SS0303<br /> |WASHER-FLAT-#8<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |SS0203<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |E1010<br /> |RECEPTACLE-TWIST LOCK<br /> |<br /> |''(Not shown)''<br /> |1<br /> |-<br /> |9<br /> |E1011<br /> |PLUG-TWIST LOCK<br /> |<br /> |''(Not shown)''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† For units not equipped with the audible alarm option, a cap (not shown) mounts on top of the strobe light in place of the audible alarm. Cap included with base.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† For units not equipped with the strobe light option, the audible alarm mounts directly to the terminal base in place of the strobe light.'' <br /> |}<br /> <br /> ==== '''&lt;big&gt;''Strobe &amp; Alarm Mounting''&lt;/big&gt;''' ====<br /> [[File:BE-TS Strobe and Alarm Mounting.png|alt=BE-TS Strobe and Alarm Mounting|frameless|516x516px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41235060<br /> |STACK LIGHT STANCHION<br /> |<br /> |''Discontinued''<br /> |A/R<br /> |-<br /> |2<br /> |HW0401<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |3<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |4<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |REF<br /> |43032006<br /> |STANCHION ASSEMBLY<br /> |<br /> |''Includes items 5 through 8''<br /> |A/R<br /> |-<br /> |5<br /> |43035003<br /> |STACK LIGHT STANCHION<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43037007-2<br /> |CLAMP BRACKET<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0305<br /> |BOLT-HHCS-1/4-20 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0050<br /> |NUT-FLANGED-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |43037004-2<br /> |MOUNTING BRACKET<br /> |<br /> |''Overhead Guard only''<br /> |1<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Horn&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Horn.png|alt=BE-TS Horn|frameless|565x565px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |YE0308<br /> |BUTTON-HORN<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0317-A<br /> |AUDIBLE ALARM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0654<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |00117101-2<br /> |MOUNTING BRACKET<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |11<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Overhead Guard&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Overhead Guard.png|alt=BE-TS Overhead Guard|frameless|530x530px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817119-2<br /> |GUARD-SIDE<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |2<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0406<br /> |BOLT-HHCS-3/8-16 X 2-1/2&quot;<br /> |<br /> |<br /> |5<br /> |-<br /> |5<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |6<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |<br /> |<br /> |5<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Side Guards used on units built November 2013 to Present. Mounting hardware valid for all units with Removable Overhead Guard.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Operator Sheild&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''&lt;big&gt;''[Current] Operator Shield''&lt;/big&gt;''' ====<br /> [[File:(Current) BE-TS 30 Operator Sheild.png|alt=(Current) BE-TS 30 Operator Sheild|frameless|566x566px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43814025<br /> |OPERATOR SHIELD<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |HC0542<br /> |GASKET EDGING<br /> |<br /> |''(2) @ 38&quot; LG, (1) @ 60&quot; LG''<br /> |136&quot;<br /> |-<br /> |3<br /> |43817116-2<br /> |BRACKET-TOP<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |1412FSW<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |43817117-2<br /> |BRACKET-CENTER SUPPORT-OUTSIDE<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43817118-2<br /> |BRACKET-CENTER SUPPORT-INSIDE<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |SS0114<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |8<br /> |SS0502<br /> |LANYARD-8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |SS0501<br /> |PIN-QUICK RELEASE-3/16&quot; X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Consult factory for units built prior to November 2013 with plexiglass bolted directly to Overhead Guard structure on front and sides.'' <br /> |}<br /> <br /> ==== '''&lt;big&gt;''Operator Shield (Used Prior to November 2013)''&lt;/big&gt;''' ====<br /> [[File:BE-TS Operator Shield (Used Prior to November 2013).png|alt=BE-TS Operator Shield (Used Prior to November 2013)|frameless|559x559px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43717116<br /> |SHIELD-OPERATOR<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |43015010<br /> |FRAME-OPERATOR SHIELD WELDMENT<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43017066-2<br /> |SUPPORT-SIDE<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |43017065-2<br /> |SUPPORT-LOWER<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43017067-2<br /> |SUPPORT-UPPER<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |7<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |32<br /> |-<br /> |8<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |9<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |16<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Consult factory for units with plexiglass bolted directly to frame.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Powered Roller Cutout&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Powered Roller Cutout Photo Eye &amp; Reflector Locations (Prior to May 2022)&lt;/big&gt;''''' ====<br /> [[File:BE-TS Powered Roller Cutout Photo Eye &amp; Reflector Locations.png|alt=BE-TS Powered Roller Cutout Photo Eye &amp; Reflector Locations|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1321A<br /> |PHOTO EYE<br /> |<br /> |''† Polarized''<br /> |1<br /> |-<br /> |2<br /> |41217170-2<br /> |MOUNT-PHOTO EYE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0216<br /> |SCREW-#10-24 X 2&quot;<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |4<br /> |HW0032<br /> |NUT-NILN-#10-24<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |E1321-R<br /> |REFLECTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |41217171<br /> |MOUNT-REFLECTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |SS0803<br /> |SCREW-RHMS-#6-32 X 5/8&quot;<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |8<br /> |SS0125<br /> |BOLT-HHCS-1/4-20 X 5/8&quot;<br /> |<br /> |''††† See notes''<br /> |4<br /> |-<br /> |9<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''Quantities provided are for Single-Sided (PRC-1) Power Roller Cutout option. For units with Double Sided (PRC-2) option, quantities are double.''<br /> |-<br /> | colspan=&quot;6&quot; |''† Polarized Photo Eye recommended to prevent potential operational issues with very smooth or shiny battery cases.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Photo Eye &amp; Reflector mounting screws are trimmed to length.''<br /> |-<br /> | colspan=&quot;6&quot; |''††† Photo Eye &amp; Reflector Bracket Mounting Screws may be required to ground flush to prevent intereferance with guards.''<br /> |}<br /> '''''&lt;big&gt;Powered Roller Cutout Photo Eye &amp; Reflector Locations (May 2022 to Present)&lt;/big&gt;'''''<br /> <br /> [[File:BE-TS Powered Roller Cutout Photo Eye &amp; Reflector Locations (May 2022 to Present).png|alt=BE-TS Powered Roller Cutout Photo Eye &amp; Reflector Locations (May 2022 to Present)|frameless|555x555px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1321A<br /> |PHOTO EYE<br /> |<br /> |''† Polarized''<br /> |1<br /> |-<br /> |2<br /> |13537001-2<br /> |MOUNT-PHOTO EYE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E1321-R<br /> |REFLECTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |41217171<br /> |MOUNT-REFLECTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |SS0803<br /> |SCREW-RHMS-#6-32 X 5/8&quot;<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |PL0506<br /> |GROMMET-SEALING-2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''Quantities provided are for Single-Sided (PRC-1) Power Roller Cutout option. For units with Double Sided (PRC-2) option, quantities are double.''<br /> |-<br /> | colspan=&quot;6&quot; |''† Polarized Photo Eye recommended to prevent potential operational issues with very smooth or shiny battery cases.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Reflector mounting screws are trimmed to length.''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Powered Roller Cutout Mounting&lt;/big&gt;''''' ====<br /> [[File:BE-TS Powered Roller Cutout Mounting.png|alt=BE-TS Powered Roller Cutout Mounting|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0281<br /> |SOLENOID VALVE<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |BI0001<br /> |NIPPLE-CLOSE-#8 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |6<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |7<br /> |H1600<br /> |ADAPTER-90 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |H1546<br /> |ADAPTER-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Powered Roller Cutout Override Button&lt;/big&gt;''''' ====<br /> [[File:BE-TS Powered Roller Cutout Override Button.png|alt=BE-TS Powered Roller Cutout Override Button|frameless|568x568px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ACTUATOR-PUSH BUTTON (DISCONTINUED)<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |N/A<br /> |CONTACT BLOCK-N/C (DISCONTINUED)<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |3<br /> |E0384<br /> |ACTUATOR-PUSH BUTTON<br /> |80932002<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0386<br /> |CONTACT BLOCK-N/C<br /> |80932002<br /> |<br /> |1<br /> |-<br /> |5<br /> |E0387<br /> |DUMMY BLOCK<br /> |80932002<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0388<br /> |PUSH BUTTON-GREEN<br /> |80932002<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''Button location on dash may vary from position shown.''<br /> |-<br /> | colspan=&quot;6&quot; |''† Parts no longer available. Must order new Push-Button Switch Kit 80932002''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Powered Roller Cutout Junction Box&lt;/big&gt;''''' ====<br /> [[File:BE-TS Powered Roller Cutout Junction Box.png|alt=BE-TS Powered Roller Cutout Junction Box|frameless|535x535px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |3<br /> |-<br /> |4<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |4<br /> |-<br /> |5<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |7<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |''Mounting bolts (Not shown)''<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Level Assist&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Level Assist.png|alt=BE-TS Level Assist|frameless|568x568px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1321A<br /> |PHOTO EYE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |13537001-2<br /> |MOUNT-PHOTO EYE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |PL0502<br /> |GROMMET<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43837007<br /> |TARGET ANGLE<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |E0376<br /> |INDICATOR LIGHT<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |7<br /> |HW0152<br /> |WASHER-5/8&quot; I.D.<br /> |<br /> |''†† See notes (Not shown)''<br /> |2<br /> |-<br /> |8<br /> |E1321-RT<br /> |REFLECTIVE TAPE<br /> |<br /> |''(Not shown)''<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''Location of Indicator Light on the dash may vary from location shown''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Extractors built prior to October 2021 used Multi-Piece Indicator Lights with Replaceable Bulb and Lens are no longer available. Current Indicator Light is a 1-Piece LED Assembly. Replacement of any Multi-Piece Component requires replacing entire assembly with current, 1-Piece Indicator Light.''<br /> |-<br /> | colspan=&quot;6&quot; |''††† Washers required for units that did not ship with Level Assist option from the factory.''<br /> |}<br /> '''&lt;big&gt;''Level Assist Junction Box''&lt;/big&gt;'''<br /> <br /> [[File:BE-TS Level Assist Junction Box.png|alt=BE-TS Level Assist Junction Box|frameless|524x524px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |4<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |5<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |''Mounting bolts (Not shown)''<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Blue Light&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Blue Light.png|alt=BE-TS Blue Light|frameless|611x611px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |EW2002B<br /> |BLUE PROJECTION SPOTLIGHT<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW0401<br /> |BOLT-HHCS-3/8-16 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0107<br /> |WASHER-LOCK-3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |4<br /> |-<br /> |5<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43835001<br /> |STANCHION-POWER<br /> |<br /> |<br /> |2<br /> |}<br /> [[File:BE-TS Blue Light Enclosure.png|alt=BE-TS Blue Light Enclosure|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-8&quot; X 8&quot; X 4&quot;<br /> |<br /> |''Consult factory''<br /> |1<br /> |-<br /> |2<br /> |E0135<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |''Blank panel without holes''<br /> |1<br /> |-<br /> |3<br /> |PS5R-SC12<br /> |POWER SUPPLY<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0908<br /> |MOUNTING RAIL<br /> |<br /> |''Sold by length''<br /> |A/R<br /> |-<br /> |5<br /> |YE0402<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |YE0405<br /> |END BARRIER<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |YE0406<br /> |END ANCHOR<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |E0341<br /> |GROUND LUG<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |3<br /> |-<br /> |10<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |11<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |''2 per Mounting Rail''<br /> |5<br /> |-<br /> |12<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |''2 per Mounting Rail''<br /> |5<br /> |-<br /> |13<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |''2 per Mounting Rail''<br /> |5<br /> |-<br /> |14<br /> |00196404<br /> |LABEL-DANGER<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Water Cart&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Water Cart.png|alt=BE-TS Water Cart|frameless|549x549px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PB0033<br /> |OVERFILL INDICATOR<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |PB0034<br /> |LOCKNUT-CONDUIT-2&quot;-NYLON<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0308<br /> |FILLER/BREATHER ASSEMBLY<br /> |<br /> |Includes gaskets<br /> |1<br /> |-<br /> |4<br /> |HW0209<br /> |SCREW-RHMS-10-32 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |5<br /> |550-057<br /> |HOSE-FILL-3/4&quot; X 15'<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |550-027<br /> |ON/OFF VALVE<br /> |<br /> |''(Not shown)''<br /> |1<br /> |-<br /> |7<br /> |PB0902<br /> |HOSE-3/4&quot;<br /> |<br /> |<br /> |30&quot;<br /> |-<br /> |8<br /> |HW1018<br /> |HOSE CLAMP-3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |PB0603<br /> |ADAPTER-3/4&quot; NPT X 3/4&quot; BARB<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |PB0456<br /> |ELBOW-STR-90 DEG-3/4&quot; NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |PB0451<br /> |ADAPTER-3/4&quot; NPT X 3/4 GHT<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |PB0302<br /> |PLUG-3/4&quot; NPT<br /> |<br /> |<br /> |<br /> |-<br /> |13<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |14<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |SS0106<br /> |SHCS-#10-24 X 1/2&quot;-SST<br /> |<br /> |<br /> |6<br /> |-<br /> |16<br /> |SS0114<br /> |BHSCS-#10-24 X 1/2&quot; SST<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |SS0301<br /> |WASHER-FLAT-#10-SAE-SST<br /> |<br /> |<br /> |10<br /> |-<br /> |18<br /> |00196701<br /> |DECAL-BHS-12&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |00196404<br /> |LABEL-DANGER-&quot;120 VOLTS&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |20<br /> |00166648<br /> |LABEL, NON-POTABLE<br /> |<br /> |<br /> |1<br /> |-<br /> |21<br /> |HW0418<br /> |BOLT-HHCS-3/8-16 X 2-1/4&quot;<br /> |<br /> | rowspan=&quot;3&quot; |''Mounting bolts'' <br /> <br /> ''(Not shown)''<br /> |2<br /> |-<br /> |22<br /> |HW0031<br /> |NUT-HEX-3/8-16 CENTERLOCK<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |2<br /> |}<br /> [[File:BE-TS Water Cart 2.png|alt=BE-TS Water Cart|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1511<br /> |SWITCH-ROCKER<br /> |<br /> |Submersible rated<br /> |1<br /> |-<br /> |2<br /> |E0378<br /> |INDICATOR LIGHT-120VAC-GREEN<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |3<br /> |E0376<br /> |INDICATOR LIGHT-120VAC-AMBER<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |4<br /> |E0377<br /> |INDICATOR LIGHT-120VAC-RED<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |5<br /> |46917015<br /> |PLACARD-INDICATOR LIGHT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0505<br /> |16-3 SO CORD<br /> |<br /> |<br /> |72&quot;<br /> |-<br /> |7<br /> |E0653<br /> |PLUG-120V/15A<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |9<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |PL0501<br /> |GROMMET-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |E1313<br /> |SOCKET-RELAY-8 PIN<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |E0331<br /> |RELAY-DPDT-110VAC<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |E0440<br /> |TERMINAL BLOCK-8 POLE<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |E1070<br /> |GROUND BAR-4 POSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |HW0139<br /> |SCREW-RHMS-#8-32 X 1 1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |HW0135<br /> |SCREW-RHMS-#8-32 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW1061<br /> |SCREW-RHMS-#8-32 X 1&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |5<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Water carts built prior to October 2021 used Multi-Piece Indicator Lights with Replaceable Bulb and Lens and are no longer available. Current Indicator Lights are a 1-Piece LED Assemblly.'' <br /> <br /> ''Replacement of any Mutli-Piece component requires replacing entire assembly with current 1-Piece Indicator Light.'' <br /> |}<br /> <br /> = &lt;big&gt;Service &amp; Maintenance&lt;/big&gt; =<br /> <br /> == &lt;big&gt;Daily Inspection List&lt;/big&gt; ==<br /> The points listed below should be visually inspected daily prior to initial start up of the Battery Extractor to ensure safe and proper operation of the unit and to help avoid unnecessary down time.<br /> <br /> # Walk around unit and inspect for any physical damage to machine not previously noted.<br /> # Verify all guards are in place.<br /> # Inspect the AC power feed for any damage.<br /> # Vacuum equipped units: Inspect vacuum cups for damage to cup sealing surface, backup casting, and vacuum hoses. Magnet equipped units: Inspect magnets for damage to attachment face, proximity sensor cover, cables and connections.<br /> # Inspect travel path and area around unit for any hydraulic oil that could be a potential repair/maintenance issue and/or safety hazard.<br /> # Check oil level in hydraulic reservoir at fill level gauge.<br /> # Check that operator safety gate and all safety switches are in proper working order.<br /> # Verify extractor path is free of obstructions.<br /> # Check roller beds for any debris and clean as required.<br /> # Board unit, engage system and verify all functions are operating properly and that no abnormal or unusual noises are present.<br /> <br /> ''* Use form IF-5008 when preforming daily inspections''<br /> <br /> == &lt;big&gt;Operator's Daily Checklist&lt;/big&gt; ==<br /> [[File:BE-TS Operator's Daily Checklist.png|alt=BE-TS Operator's Daily Checklist|frameless|1180x1180px]]<br /> <br /> == &lt;big&gt;Recommended Battery Extractor Lubrication Intervals&lt;/big&gt; ==<br /> {| class=&quot;wikitable&quot;<br /> !Lubrication Task<br /> !'''# of Places'''<br /> !Intervals<br /> |-<br /> |'''1. Lubricate grease fittings using #2 lithium based grease'''<br /> |<br /> |<br /> |-<br /> |A. Extractor arm drive nut and carrier bearings<br /> |5 places<br /> |50 hrs / Weekly<br /> |-<br /> |B. Idler casters<br /> |2 places<br /> |200 hrs / Weekly<br /> |-<br /> |'''2. Wipe off and lubricate chains using light machine oil'''<br /> |<br /> |<br /> |-<br /> |A. #80 Lift chains (Not applicable to BE-SL units)<br /> |4 places<br /> |200 hrs / Monthly<br /> |-<br /> |B. #60 Equalization chains<br /> |4 places<br /> |200 hrs / Monthly<br /> |-<br /> |C. #35 Powered roller chains<br /> |8 places<br /> |200 hrs / Monthly<br /> |-<br /> |'''3. Change return line hydraulic fluid filter'''<br /> ''(Oil filtration of at least 20 microns is recommended)''<br /> |1 place<br /> |300 hrs / Twice Quarterly<br /> |-<br /> |'''4. Change hydraulic fluid'''<br /> | -<br /> |600 hrs / Quarterly *<br /> |-<br /> |'''5. Complete preventative maintenance (PM)'''<br /> Use form IF-5029 for Vacuum equipped units.<br /> <br /> Use form IF-5028 for Magnet equipped units.<br /> | -<br /> |600 hrs / Quarterly<br /> |-<br /> ! colspan=&quot;3&quot; |NOTES<br /> |-<br /> | colspan=&quot;3&quot; |''These recommendations are based on average use in a typical warehouse environment and may be adjusted based on specific circumstances. Dusty and/or extreme hot/cold environments may require more frequent lubrication.''<br /> |-<br /> | colspan=&quot;3&quot; |''* BHS recommends implementing an oil sampling and analysis program to monitor hydraulic fluid condition and determine when hydraulic fluid changes are required. The fluid analysis program should be a continuous process and all results should be evaluated. Changes in the condition of the hydraulic system may indicate component wear, fluid deterioration and/or contamination.''<br /> |}<br /> {|<br /> |[[File:NOTICE-warn.png|alt=NOTICE|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:NOTICE-warn.png]]<br /> |<br /> *'''The mounted bearings used on the power rollers, equalization shafts, drive wheels, and drive screw are sealed and shielded bearings. Lubrication may breach the seals of these bearings, therefore these bearings should not be lubricated unless the machine has been cleaned with a high pressure wash on a regular basis (not recommended).'''<br /> *'''Hydraulic fluid should not exceed 140°F (60°C) for extended periods.'''<br /> |}<br /> ===&lt;big&gt;'''&lt;u&gt;Reservoir Capacities ''(APPROX.)''&lt;/u&gt;'''&lt;/big&gt;===<br /> {|<br /> |BE-SL<br /> |18 gal (68 L)<br /> |-<br /> |BE-DS<br /> |18 gal (68 L)<br /> |-<br /> | rowspan=&quot;2&quot; |BE-TS<br /> |30 gal (114 L) ''(Units built Pre-2014)''<br /> |-<br /> |45 gal (170 L) ''(Units built 2014 to Present)''<br /> |-<br /> |BE-QS<br /> |60 gal (227 L)<br /> |}The reservoir should be filled so fluid level is within a half inch (1/2&quot;) of the top of sight glass. Use Chevron AW 68 or equivalent ISO 68 grade hydraulic oil with anti-wear additives and foam suppressant.<br /> <br /> '''''NOTE'':''' Some units shipped from the factory with AW 32 oil for cold environment operation. Units using AW 32 from the factory may experience poor performance if AW 68 is used instead of AW 32 due to the increased viscosity of the oil.<br /> <br /> ==&lt;big&gt;Preventative Maintenance Reports&lt;/big&gt;==<br /> ===&lt;big&gt;&lt;u&gt;Vacuum Extraction&lt;/u&gt;&lt;/big&gt;===<br /> [[File:Battery Extractor Series - Vacuum Extraction Planned Maintenance Inspection Report Page 1.png|alt=Battery Extractor Series - Vacuum Extraction Planned Maintenance Inspection Report Page1|frameless|1238x1238px|link=https://tech.bhs1.com/index.php/File:Battery_Extractor_Series_-_Vacuum_Extraction_Planned_Maintenance_Inspection_Report_Page_1.png]]<br /> <br /> [[File:Battery Extractor Series - Vacuum Extraction Planned Maintenance Inspection Report page2.png|alt=Battery Extractor Series - Vacuum Extraction Planned Maintenance Inspection Report Page 2|frameless|1230x1230px|link=https://tech.bhs1.com/index.php/File:Battery_Extractor_Series_-_Vacuum_Extraction_Planned_Maintenance_Inspection_Report_page2.png]]<br /> ===&lt;big&gt;&lt;u&gt;Magnet Extraction&lt;/u&gt;&lt;/big&gt;===<br /> [[File:Battery Extractor Series - Magnet Extraction Planned Maintenance Inspection Report Page 1.png|alt=Battery Extractor Series - Magnet Extraction Planned Maintenance Inspection Report Page 1|frameless|1224x1224px|link=https://tech.bhs1.com/index.php/File:Battery_Extractor_Series_-_Magnet_Extraction_Planned_Maintenance_Inspection_Report_Page_1.png]]<br /> <br /> [[File:Battery Extractor Series - Magnet Extraction Planned Maintenance Inspection Report Page 2.png|alt=Battery Extractor Series - Magnet Extraction Planned Maintenance Inspection Report Page 2|frameless|1233x1233px|link=https://tech.bhs1.com/index.php/File:Battery_Extractor_Series_-_Magnet_Extraction_Planned_Maintenance_Inspection_Report_Page_2.png]]<br /> <br /> ==&lt;big&gt;80292002-i – Equalization Chain Installation / Resetting Procedure&lt;/big&gt;==<br /> ===&lt;big&gt;&lt;u&gt;Required Tools&lt;/u&gt;&lt;/big&gt;===<br /> *Large standard screwdriver<br /> *1/8&quot;, 5/32&quot;, 3/16&quot; Allen wrench<br /> *(2) 1-1/8&quot; Open-end wrenches<br /> *Needle nose pliers<br /> *6&quot; Steel scale (ruler)<br /> *Brake cleaner (non-chlorinated)<br /> *Loctite #242 (blue)<br /> *80292002 - E.Q. Adjustment stop kit (SL, DS, TS) or 80492001 - BE-QS E.Q. Adjustment stop kit<br /> *Ladder or work platform ''(see notes)''<br /> ===&lt;big&gt;&lt;u&gt;''Optional Tools''&lt;/u&gt;&lt;/big&gt;===<br /> *Wire brush for removing Loctite from components prior to reassembly<br /> ===&lt;big&gt;&lt;u&gt;Notes&lt;/u&gt;&lt;/big&gt;===<br /> *''A ladder, man lift or other device is required to access the upper E.Q. studs on BE-TS and BE-QS units.''<br /> *''The following procedures must be performed with the extractor unloaded and in a level area of the travel path.''<br /> *''Installation of the E.Q. stop kit requires (4) persons plus a trained battery extractor operator to raise and lower the inner carriage.''<br /> *''It is recommended to have new E.Q. chain connecting links on hand prior to performing the following procedures.''<br /> *''The upper E.Q. stud lock washers cannot be reused and must be replaced prior to reassembly.''<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Page 369 Image 0001.png|alt=BE-TS with EQ Adjustment Stops Installed|none|thumb|300x300px|BE-TS with EQ Adjustment Stops Installed|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Page_369_Image_0001.png]]<br /> ===&lt;big&gt;&lt;u&gt;IMPORTANT&lt;/u&gt;&lt;/big&gt;===<br /> *'''Read and understand the Safety and De-energization Procedure TP-606 before starting this procedure.'''<br /> *'''Read and understand these instructions completely before starting this procedure.'''<br /> ===&lt;big&gt;&lt;u&gt;Procedure&lt;/u&gt;&lt;/big&gt;===<br /> 1. Remove the inner and outer frame guards to access the lower equalization studs.<br /> <br /> 2. Raise the inner frame approximately 30&quot; (762 mm) for SL, DS and TS units or 50&quot; (1270 mm) for QS units from the fully lowered position. Install (1) adjustment stop at each corner of the roller bed. See Figure 1.[[File:IOP-400 BE-SL&amp;DS (10-23) EQ Chain Instructions-Figure1.png|alt=|none|thumb|375x375px|FIGURE 1|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_EQ_Chain_Instructions-Figure1.png]]3. Slowly lower the inner carriage until the roller bed is firmly and securely seated against all four stops. See Figure 2.[[File:IOP-400 BE-SL&amp;DS (10-23) Page 370 Image 0002.png|alt=Roller bed firmly seated against all four stops|none|thumb|398x398px|FIGURE 2|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Page_370_Image_0002.png]]4. Lockout/tagout the B.E. per your corporate policy.<br /> <br /> 5. De-energize the B.E. per BHS Safety and De-energization procedure TP-606.<br /> <br /> 6. Loosen and remove the upper hex nuts and remove the upper chain studs. Remove the lock washers from the upper chain studs. Save the hex nuts for reassembly later. Discard the lock washers and obtain new, 3/4&quot; split-ring lock washers for reassembly.<br /> <br /> 7. If replacing the chain, remove the upper stud and remove the chain from the lower stud. Discard the connecting links.<br /> *''If the E.Q. chains are being reset due to a connecting link failure, it is recommended to also replace the stud where the connecting link failed.''<br /> *''It is recommended to replace the connecting links when replacing or resetting the E.Q. chains.''<br /> 8. If replacing a lower stud, remove the connecting link and disconnect the chain. Loosen the hex nut and remove the stud. Remove the hex nut from the old stud and reinstall it on the new stud. Reinstall the new stud so that it is flush with the bottom of the frame and the hole is aligned front-to-back with the extractor.<br /> <br /> 9. Attach the chains to the lower studs using the connecting links. Attach the upper studs to the chains using the connecting links, making sure the nut is threaded down near the connecting link and lay the chains in the frame. See Figure 3.<br /> *''Do not fully assemble the lower connecting links by bending the cotter pins as the connecting link may need to be removed later for stud adjustment.''[[File:IOP-400 BE-SL&amp;DS (10-23) EQ Chain Attached to Upper Stud.png|alt=BE-TS Chain Attached to Upper Stud|none|thumb|300x300px|FIGURE 3|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_EQ_Chain_Attached_to_Upper_Stud.png]]<br /> 10. If new E.Q. sprockets are to be installed, remove the clamp collars and old sprockets. Install the new sprockets and reinstall the clamp collars. DO NOT tighten the set screws at this point as adjustment/alignment may be required.<br /> *''Sprockets MUST be keyed in-line.''<br /> 11. Align the E.Q. shafts so that the keyways are in the 2 o'clock position (approximately 60 degrees from vertical). This will bring the sprocket set screws to the top of the sprocket when the inner carriage is lowered. See Figure 4.[[File:IOP-400 BE-SL&amp;DS (10-23) EQ Shafts aligned 60 Degrees from Vertical.png|alt=BE-TS EQ Shafts aligned 60 Degrees from Vertical|none|thumb|300x300px|FIGURE 4|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_EQ_Shafts_aligned_60_Degrees_from_Vertical.png]]12. Starting with the inside chain, route the chain over the sprocket directly above the lower stud and under the inside sprocket on the opposite shaft. Attach the upper stud to the top cross bar, making sure a new 3/4&quot; split -ring lock washer is installed between the cross bar and lower hex nut. Hand tighten the upper stud adjusting nut to remove slack from the chain. See Figure 5.<br /> <br /> 13. Route the outer chain over the sprocket, above the stud and under the sprocket on the opposite shaft. Attach the upper stud to the top cross bar, making sure a new, 3/4&quot; split-ring lock washer is installed between the cross bar and lower hex nut. Hand tighten the upper stud adjusting nut to remove slack from the chain. See Figure 5.<br /> *''It is recommended to begin at the operator end where room is limited allowing easier access at the opposite end to route the chain under the final sprocket.''<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Inside and Outside EQ Chains.png|alt=BE-TS Inside and Outside EQ Chains|none|thumb|499x499px|FIGURE 5|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Inside_and_Outside_EQ_Chains.png]]14. Repeat steps 11 through 13 for the opposite side of the extractor. It is likely that a large, standard screwdriver will be necessary to position the final chain over the sprocket. See Figure 6.[[File:IOP-400 BE-SL&amp;DS (10-23) Page 371 Image 0002.png|alt=It is likely that a large, standard screwdriver will be necessary to position the final chain over the sprocket.|none|thumb|300x300px|FIGURE 6|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Page_371_Image_0002.png]]15. Adjust the lower studs up or down as necessary to take the slack out of the chain between the lower studs and the sprockets by removing the connecting link from the stud and turning the stud. Tighten the hex nuts against the frame once the studs have been adjusted. Reattach the chain.<br /> *DO NOT allow the stud to twist when tightening the hex nuts.<br /> 16. Tighten the upper hex nut on the upper studs until there is approximately 1/4&quot; (7 mm) of total deflection in the middle of the upper, vertical chain sections. Tighten the lower hex nuts on the upper studs to lock the studs in place.<br /> *''Each section of chain between the sprockets should have approximately the same tension as the other on the same side. See Figure 5.''<br /> 17. Raise the inner frame and remove the adjustment stops from the four corners and lower the inside frame.<br /> <br /> 18. Verify equalization sprocket and stud alignment by using a 6&quot; scale. Measure the distance from the inside roller bed frame to the center of the equalization stud. Compare this distance with the measurements from the inside roller bed frame to the center-lines of the sprockets. Adjust the position of the sprocket as necessary to make the distances equal. This will ensure the chain and sprockets are in line with the stud. Repeat this process for the three remaining chains. See Figures 7 &amp; 8.<br /> <br /> 19. Raise and lower the inner frame several times and listen for any chain popping noises to confirm the sprockets are in line with the lower studs. If there is no popping noise, lower the inner frame all the way down.[[File:IOP-400 BE-SL&amp;DS (10-23) EQ Chain Verify equalization sprocket and stud alignment by using a 6in scale-Fig7.png|alt=BE-TS EQ Chain Procedure Figure 7 - Verify equalization sprocket and stud alignment by using a 6&quot; scale|none|thumb|300x300px|FIGURE 7|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_EQ_Chain_Verify_equalization_sprocket_and_stud_alignment_by_using_a_6in_scale-Fig7.png]][[File:IOP-400 BE-SL&amp;DS (10-23) EQ Chain Verify equalization sprocket and stud alignment by using a 6in scale-Fig8.png|alt=BE-TS EQ Chain Verify equalization sprocket and stud alignment by using a 6in scale - Fig 8|none|thumb|300x300px|FIGURE 8|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_EQ_Chain_Verify_equalization_sprocket_and_stud_alignment_by_using_a_6in_scale-Fig8.png]]20. Clean any existing, hardened Loctite from the sprockets, sprocket sets screws, clamp collars and clamp collar bolts.<br /> <br /> 21. Apply Loctite to and tighten the set screws on the sprockets. Slide the clamp collars against the outside sprocket, loctite and tighten the clamp collars.<br /> ==&lt;big&gt;80292001-i – Battery Extractor Service Stand Installation Instructions&lt;/big&gt;==<br /> ===&lt;big&gt;&lt;u&gt;Required Tools&lt;/u&gt;&lt;/big&gt;===<br /> None<br /> ===&lt;big&gt;&lt;u&gt;Notes&lt;/u&gt;&lt;/big&gt;===<br /> *''Refer to kit part # 80292001 or 80392001 for the complete bill of materials supplied.''<br /> *''Remove ALL batteries from extractor prior to installation / service.''<br /> *''Installation of service stands requires (2) persons plus a trained battery extractor operator to raise and lower the inner carriage. DO NOT attempt installation with less than (3) persons.''<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Single Level Service Stand Properly Installed.png|alt=Single Level Service Stand Properly Installed|none|thumb|368x368px|Single Level Service Stand Properly Installed|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Single_Level_Service_Stand_Properly_Installed.png]]<br /> ===&lt;big&gt;&lt;u&gt;IMPORTANT&lt;/u&gt;&lt;/big&gt;===<br /> *'''Read and understand the Safety and De-energization Procedure TP-606 before starting this procedure.'''<br /> *'''Read and understand these instructions completely before starting this procedure.'''<br /> ===&lt;big&gt;&lt;u&gt;Procedure&lt;/u&gt;&lt;/big&gt;===<br /> 1. Have a qualified operator raise the inner carriage of the extractor to the required height for installation. For single level applications, the required height will be approximately 25&quot; (64 cm) from the fully lowered position. For double, triple, and quad stack machines, the required height will be approximately 55&quot; (140 cm) from the fully lowered position.<br /> *On double, triple, and quad stack battery extractors, the operator either must remain on the operator platform during service or be provided an OSHA approved method of egress. This is not applicable to single level battery extractors as the operator platform height is fixed.<br /> 2. Install the stands by engaging the top of the stand into the inner carriage cutouts. Place the bottom channel of the stand over the tube of the outer frame. The top flanges of each stand are tapered to aid in proper alignment of the stand with the inner frame.<br /> <br /> See Figures 1 &amp; 2.[[File:IOP-400 BE-SL&amp;DS (10-23) engaging the top of the stand into the inner carriage cutout.png|alt=Properly seated in cutout|none|thumb|300x300px|FIGURE 1|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_engaging_the_top_of_the_stand_into_the_inner_carriage_cutout.png]][[File:IOP-400 BE-SL&amp;DS (10-23) Page 374 Image 0005.png|none|thumb|300x300px|FIGURE 2|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Page_374_Image_0005.png]]3. Once BOTH stands have been properly placed, SLOWLY lower the inner carriage while the stands are held in place.<br /> <br /> 4. Once the inner carriage is firmly seated on the service stands, verify the stands are securely installed. See Figure 3.[[File:IOP-400 BE-SL&amp;DS (10-23) Page 374 Image 0006.png|none|thumb|450x450px|FIGURE 3|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Page_374_Image_0006.png]]<br /> ==&lt;big&gt;Trouble Shooting Guide&lt;/big&gt;==<br /> {| class=&quot;wikitable&quot;<br /> !Problem Symptom<br /> !Probable Cause<br /> !Solution<br /> |-<br /> |Hydraulic power Unit does not operate.<br /> No electric to power unit motor.<br /> |1. No AC power to Unit.<br /> 2. Reset on magnetic motor starter tripped.<br /> <br /> 3. Gate switch not actuated.<br /> <br /> 4. Foot Pedal switch not engaged.<br /> <br /> 5. Emergency Stop switch is depressed.<br /> |1. Check fuses or breaker.<br /> 2. Check reset button.<br /> <br /> 3. Make sure safety gate is engaging switch.<br /> <br /> 4. Check foot pedal for obstruction.<br /> <br /> 5. Reset button using machine key.<br /> |-<br /> |Power unit runs but no pressure reading at gauge,<br /> also no functions move.<br /> |1. AC input is in reverse phase. Motor is running backwards.<br /> 2. Main system relief valve stuck open or defective.<br /> <br /> 3. Coupling between motor and pump loose.<br /> |1. Reverse any two of the three hot lines to unit.<br /> 2. Check relief valve cartridge for trash or debris.<br /> <br /> Replace as required.<br /> <br /> 3. Inspect coupling assy.<br /> |-<br /> |Magnetic starter contact chatters-at startup.<br /> Contact chatters while traveling.<br /> |1. 1 leg of 3 phase input power out.<br /> 2. Safety gate and/or gate switch out of adjustment.<br /> |1. Check fuse or circuit breaker at service panel.<br /> 2. Check and adjust gate or switch as required to<br /> <br /> ensure full engagement of plunger on gate<br /> <br /> switch and that the safety gate is not bouncing<br /> <br /> due to vibration.<br /> |-<br /> |No floor travel empty or loaded-all other functions work properly.<br /> |1. Extractor arm off center-left to right.<br /> 2. Proximity switch or sensing bracket out of target range.<br /> <br /> 3. Proximity switch defective or broken.<br /> <br /> 4. Bad solenoid coil on floor cutout valve.<br /> <br /> 5. Spool on floor cutout valve stuck open.<br /> |1. Center arm.<br /> 2. Adjust as needed to achieve 1/4” clearance.<br /> <br /> 3. Check switch and replace.<br /> <br /> 4. Check solenoid and replace if needed.<br /> <br /> 5. Remove and clean spool cartridge or replace.<br /> |-<br /> |Floor travel moves but is sluggish<br /> and stalls with a load at certain points.<br /> |1. Uneven floor conditions. High/low spots.<br /> 2. Excessive tire wear.<br /> <br /> 3. Wheel shaft-to-motor shaft coupling on drive wheel assembly loose or broken.<br /> <br /> 4. Debris lodged under battery extractor.<br /> |1. Check flatness of floor. Check guidance track for scraping of guide arm on top of angle.<br /> 2. Measure under clearance of battery extractor. Should be no less than 5/8” replace poly wheels as needed.<br /> <br /> 3. Inspect drive assembly while under load to see if shafts and couplings are moving in unison. Repair as needed.<br /> <br /> 4. Inspect under unit and remove debris.<br /> |-<br /> |Inner carriage bounces while lifting under load,<br /> but not when empty.<br /> |1. Down speed adjustment valve open too far.<br /> |1. Adjust as needed to eliminate carriage bounce.<br /> |-<br /> |Inner carriage does not lift evenly.<br /> Four corners do not land evenly against outer frame tube.<br /> |1. Equalization chains are out of adjustment.<br /> 2. Excessive chain or sprocket wear.<br /> <br /> 3. Equalization chains are out of synchronization. Possibly may have jumped a sprocket tooth.<br /> <br /> 4. Broken bearing housing on mounted shaft.<br /> <br /> 5. Lift cylinder roping chains out of adjustment.<br /> |1. Readjust with the top stud until equal tension is achieved.<br /> 2. Replace as needed.<br /> <br /> 3. Evaluate and resynchronize as required.<br /> <br /> 4. Inspect and replace.<br /> <br /> 5. Readjust as needed to equal tension on all four cylinders in full down position.<br /> |}<br /> =&lt;big&gt;Aftermarket Support&lt;/big&gt;=<br /> [https://na.bhs1.com/blog/post/tt-922-technical-support Click here] for details on BHS' Aftermarket Support.<br /> =&lt;big&gt;Statement of Warranty&lt;/big&gt;=<br /> [https://store.bhs1.com/warranty Click here] for details on BHS' Statement of Warranty.</div>

Kperrier https://tech.bhs1.com/index.php?title=File:BE-TS_120V-Receptacle.png&diff=7669 2024-04-02T17:10:30Z

<p>Kperrier: </p> <hr /> <div>BE-TS 120V Receptacle</div>

Kperrier https://tech.bhs1.com/index.php?title=File:BE-TS_Proximity_Switch_Electrical.png&diff=7668 2024-04-02T17:09:58Z

<p>Kperrier: Kperrier reverted File:BE-TS Proximity Switch Electrical.png to an old version</p> <hr /> <div>BE-TS Proximity Switch Electrical</div>

Kperrier https://tech.bhs1.com/index.php?title=File:BE-TS_Junction_Box.png&diff=7667 2024-04-02T17:08:45Z

<p>Kperrier: Kperrier reverted File:BE-TS Junction Box.png to an old version</p> <hr /> <div>BE-TS Junction Box</div>

Kperrier https://tech.bhs1.com/index.php?title=File:BE-TS_Junction_Box.png&diff=7666 2024-04-02T17:08:25Z

<p>Kperrier: Kperrier uploaded a new version of File:BE-TS Junction Box.png</p> <hr /> <div>BE-TS Junction Box</div>

Kperrier https://tech.bhs1.com/index.php?title=File:BE-TS_Proximity_Switch_Electrical.png&diff=7665 2024-04-02T17:04:58Z

<p>Kperrier: Kperrier uploaded a new version of File:BE-TS Proximity Switch Electrical.png</p> <hr /> <div>BE-TS Proximity Switch Electrical</div>

Kperrier https://tech.bhs1.com/index.php?title=(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)&diff=7664 2024-04-02T17:00:45Z

<p>Kperrier: /* Drive Wheel Motors */</p> <hr /> <div>'''Looking for a specific replacement part?''' Ctrl-F (or Command-F for Mac users) brings up your browsers search panel and can search any text on the entire web page. Find parts by searching a part # or part description.<br /> <br /> '''Register your equipment with [https://na.bhs1.com/media-library/bhs-optima/ BHS Optima], BHS's free app.'''<br /> <br /> '''California Residents''': WARNING: This product contains chemicals known to the State of California to cause cancer and/or reproductive harm, and birth defects or other reproductive harm. [https://na.bhs1.com/about-bhs/compliance-statement-for-california-proposition-65/ Learn more here.]<br /> =&lt;big&gt;Preface&lt;/big&gt;=<br /> =&lt;big&gt;TP-606 – Safety &amp; De-Energization Procedures&lt;/big&gt;=<br /> ==&lt;big&gt;General Safety&lt;/big&gt;==<br /> {|<br /> |[[File:Read Before Operating Notice.png|alt=Read Before Operating|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:Read_Before_Operating_Notice.png]]<br /> |<br /> *Read and understand all instructions and warnings before using or servicing this equipment.<br /> *Keep these instructions for future reference.<br /> |}<br /> *Battery Extractor (BE) units shall only be operated by suitable persons of at least 18 years of age, who have been trained in the proper and safe operation of the BE and expressly certified/charged, in writing, by the user or their representative.<br /> *Only one person is permitted to travel on the BE at any time.<br /> *BE units shall only be used indoors in an industrial setting on a hard, nonslip, and level floor without defects including but not limited to holes, gouges, cracks, drains or obstacles comprised of concrete or other suitable industrial material meeting the minimum requirements specified by BHS as well as any local requirements.<br /> *A licensed structural engineer should be consulted prior to installing a BE on any building level other than the ground floor.<br /> *BE units are not designed to be shipped or transported after initial delivery.<br /> *Failure to follow these instructions and warnings may result in property damage, personal injury or death.<br /> ===&lt;big&gt;&lt;u&gt;Work Area&lt;/u&gt;&lt;/big&gt;===<br /> *Keep work area clean and well lit. Cluttered work areas and poor lighting can lead to accidents.<br /> *Clean up/contain any fluid spills immediately to prevent slips or falls.<br /> *Be aware of potential hazards when performing any service or maintenance to the unit.<br /> ===&lt;big&gt;&lt;u&gt;Service &amp; Maintenance&lt;/u&gt;&lt;/big&gt;===<br /> Service personnel shall wear Personal Protective Equipment (PPE) appropriate for the task being performed.<br /> {|<br /> |[[File:Electrical Hazard Warning.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Electrical_Hazard_Warning.png]]<br /> [[File:Danger Warning.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Danger_Warning.png|alt=DANGER]]<br /> |<br /> ===&lt;big&gt;&lt;u&gt;Lockout/Tagout&lt;/u&gt;&lt;/big&gt;===<br /> '''Lockout/tagout the BE per your corporate policy, if damaged or not functioning properly. Lockout/tagout and de-energize all systems prior to performing any maintenance or service to unit.'''<br /> |}<br /> {|<br /> |[[File:Warning-Battery-Explosion.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Warning-Battery-Explosion.png]]<br /> [[File:Danger Warning.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Danger_Warning.png|alt=DANGER]]<br /> |<br /> ===&lt;big&gt;&lt;u&gt;Lead-Acid Battery Explosion Hazard&lt;/u&gt;&lt;/big&gt;===<br /> '''DO NOT allow open flames or sparks of any kind near a battery. Highly explosive gas is generated when charging a battery that can remain in battery cells for extended periods of time after charging is complete.'''<br /> *Always wear appropriate PPE including rubber apron, gloves, boots and full face shield when performing service or maintenance to any lead-acid batteries.<br /> *DO NOT place metal or other conductive objects on top of battery. Arcing may occur causing damage to the battery and/or serious personal injury or death.<br /> *Use only chargers matching the voltage and amperage of the battery being charged. Overcharging a battery can cause damage to the battery, charger and/or serious personal injury or death.<br /> *Turn off charger before disconnecting battery from charger. Arcing between battery and charger connectors can cause damage to the connectors and/or serious personal injury or death.<br /> |}<br /> {|<br /> |[[File:Warning-Hydrualic-Hazard.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Warning-Hydrualic-Hazard.png]]<br /> [[File:Warning.png|alt=WARNING|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Warning.png]]<br /> |<br /> ===&lt;big&gt;&lt;u&gt;Hydraulic Hazards&lt;/u&gt;&lt;/big&gt;===<br /> '''AVOID HIGH PRESSURE FLUIDS-Escaping fluid under pressure can penetrate the skin causing serious injury. Relieve pressure before disconnecting hydraulic lines. Tighten all connections before applying pressure. Keep hands and body away from pin holes which eject fluids under high pressure. Use a piece of cardboard or paper to search for leaks. DO NOT use your hand.'''<br /> <br /> '''Any fluid injected into the skin under high pressure should be considered a serious medical emergency despite an initial normal appearance of the skin. There will be a delayed onset of pain, and serious tissue damage may occur. Medical attention should be sought immediately.'''<br /> |}<br /> {|<br /> ![[File:No Pacemakers Notice.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:No_Pacemakers_Notice.png]][[File:Strong Magnet Field Hazard Warning.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Strong_Magnet_Field_Hazard_Warning.png]]<br /> [[File:Warning.png|alt=WARNING|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Warning.png]]<br /> |<br /> ===&lt;big&gt;&lt;u&gt;Electromagnet Hazard&lt;/u&gt;&lt;/big&gt;===<br /> '''Units equipped with magnetic extraction generate strong magnetic fields. Persons with pacemakers &lt;u&gt;SHOULD&lt;/u&gt;''' &lt;u&gt;'''NOT'''&lt;/u&gt; '''operate or be in close proximity to equipment during operation.'''<br /> <br /> '''Failure to comply with this direction''' '''could result in serious personal injury or death.'''<br /> |}<br /> ===&lt;big&gt;&lt;u&gt;Operational Safety&lt;/u&gt;&lt;/big&gt;===<br /> *Only personnel trained in the proper and safe operation of BE units may operate or service the BE.<br /> *Operators shall wear appropriate PPE suitable for working with industrial lead-acid batteries while operating the BE ''(See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Lead-Acid_Battery_Explosion_Hazard Lead-Acid Battery Explosion Hazard] section).''<br /> *All data plates, warning labels, placards, etc. shall be in place and legible at all times. Contact BHS for re-placement data plates, warning labels, placards or instructions.<br /> *All users and service personnel shall be familiar with the meaning and risks associated with all data plates, warning labels, etc.<br /> *All operators and service personnel shall be aware of potential crush and shear points while operating or servicing the BE.<br /> *Keep hands and arms inside the operator compartment while operating the BE.<br /> *Remove BE from service if damaged, defective, or operating improperly (or becomes such while operating) until repairs can be made to correct any problem(s).<br /> *All operators shall be aware of the location of the end stops in the travel path to prevent driving the BE into the end stops.<br /> ===&lt;u&gt;&lt;big&gt;Do's and Don'ts&lt;/big&gt;&lt;/u&gt;===<br /> *'''DO NOT''' exceed the maximum capacity of the BE.<br /> *'''DO NOT''' modify or fit the BE with attachments without prior, written approval from BHS.<br /> *'''DO NOT''' perform any maintenance or service to the BE with a battery loaded on the BE.<br /> *'''DO NOT''' allow anyone to ride in or on the BE.<br /> *'''DO NOT''' operate the BE with any guard or cover removed unless required for maintenance or repair.<br /> *Disconnect the BE from all power sources before attempting to perform service or maintenance to the unit.<br /> *'''DO NOT''' drive the BE into the end stops.<br /> *'''DO NOT''' operate the BE if disengaged from the guidance track.<br /> *'''DO NOT''' allow a battery to exit the BE when a lift truck or battery stand is not present to accept the battery.<br /> *'''DO NOT''' rotate the arm onto a battery such that any part of the extractor arm, vacuum cup or magnet contacts the top of the battery.<br /> *'''DO NOT''' allow anyone to enter the area under the carriage without the service stands properly installed.<br /> *'''DO NOT''' use the BE in a manner for which it is not intended. Some examples of prohibited use are but not limited to:<br /> **To transport people<br /> **As a vehicle jack<br /> **To lift loads greater than its rated load capacity<br /> **Where unintentional movement may exist<br /> **Having direct contact with foodstuffs<br /> **In a potentially explosive atmosphere<br /> ==&lt;big&gt;De-Energization&lt;/big&gt;==<br /> 1. Fully lower the BE roller bed or position the roller bed on service stands if service requires the bed be raised. See Figures 1 &amp; 2.<br /> {|<br /> |[[File:WARNING-warn.png|alt=WARNING|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:WARNING-warn.png]]<br /> !Failure to properly support the roller bed when performing service under the BE could result in injury from the roller bed lowering unexpectedly.<br /> |}[[File:IOP-400 BE-SL&amp;DS (10-23) Fully Lower BE Roller Bed.png|alt=Fully lowered BE roller bed|none|thumb|FIGURE 1|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Fully_Lower_BE_Roller_Bed.png]][[File:IOP-400 BE-SL&amp;DS (10-23) BE Roller Bed on Service Stands .png|alt=Raised BE roller bed positioned on service stands|none|thumb|FIGURE 2|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_BE_Roller_Bed_on_Service_Stands_.png]]2. Turn key on dashboard to the “OFF” position. See Figure 3.[[File:IOP-400 BE-SL&amp;DS (10-23) De-Energization Figure 3.png|alt=Key on BE dashboard turned to the “OFF” position.|none|thumb|FIGURE 3|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_De-Energization_Figure_3.png]]3. Disconnect power to the extractor or shut off the electrical branch circuit breaker.<br /> {|<br /> |[[File:Danger Warning.png|alt=DANGER|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Danger_Warning.png]]<br /> |'''Failure to disconnect electrical power to the BE could result in electrical shock. Serious personal injury or death will occur.'''<br /> |}4. Actuate all hydraulic levers in both directions to re-lease any stored hydraulic pressure. See Figure 4.<br /> {|<br /> |[[File:WARNING-warn.png|alt=WARNING|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:WARNING-warn.png]]<br /> |'''Failure to release any stored hydraulic pres-sure could result in injury from:'''<br /> *'''Escaping hydraulic fluid under high pressure (see ''[https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Hydraulic_Hazards HYDRAULIC HAZARDS]'' in the ''[https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#General_Safety GENERAL SAFETY]'' section).'''<br /> *'''Unexpected movement of hydraulic components.'''<br /> |}[[File:IOP-400 BE-SL&amp;DS (10-23) Actuate all Hydraulic Levers in Both Directions.png|alt=Actuate all hydraulic levers in both directions to release any stored hydraulic pressure.|none|thumb|FIGURE 4|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Actuate_all_Hydraulic_Levers_in_Both_Directions.png]]<br /> ==&lt;big&gt;Labels &amp; Placards&lt;/big&gt;==<br /> '''Operators should be familiar with the meaning of the following labels and placards found on the BE to ensure proper and safe operation.'''<br /> {| class=&quot;wikitable&quot;<br /> |-<br /> ![[File:Read Before Operating Notice.png|alt=Read Before Operating|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Read_Before_Operating_Notice.png]]<br /> |'''Read and understand instruction manual prior to use.'''<br /> |-<br /> ![[File:Lockout-Before-Servicing-Notice.png|alt=Lockout Before Servicing Unit|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Lockout-Before-Servicing-Notice.png]]<br /> |'''Lockout before servicing.'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Extractor Arm Positioning Arrows.png|alt=BE-SL &amp; BE-DS Extractor Arm Positioning Arrows|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Extractor_Arm_Positioning_Arrows.png]]<br /> |'''Extractor arm positioning arrows'''<br /> |-<br /> ![[File:Do Not Operate Without Guards or Covers Notice.png|alt=DO NOT Operate Without Guards or Covers Notice|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Do_Not_Operate_Without_Guards_or_Covers_Notice.png]]<br /> |'''DO NOT operate with guards or covers removed'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) No Riders Allowed.png|alt=No riders allowed|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_No_Riders_Allowed.png]]<br /> |'''NO riders allowed.'''<br /> |-<br /> ![[File:No Pacemakers Notice.png|alt=DO NOT operate by or in close proximity to people with pacemakers.|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:No_Pacemakers_Notice.png]]<br /> |'''DO NOT operate by or in close proximity to people with pacemakers.'''<br /> |-<br /> ![[File:Strong Magnet Field Hazard Warning.png|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Strong_Magnet_Field_Hazard_Warning.png]]<br /> [[File:Warning.png|alt=WARNING|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Warning.png]]<br /> |'''Strong Magnet Field Hazard'''<br /> *Attraction between magnet and metallic objects can crush.<br /> *Keep unsecured metallic objects away from magnet.<br /> *De-energize and lockout/tagout before servicing.<br /> |-<br /> ![[File:Chain Entanglement Hazard Warning.png|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Chain_Entanglement_Hazard_Warning.png]]<br /> [[File:Warning.png|alt=WARNING|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Warning.png]]<br /> |'''Chain Entanglement Hazard'''<br /> *Moving chains and sprockets can crush and cut.<br /> *Keep hands and fingers clear. Do not operate with guards removed.<br /> *De-energize and lockout/tagout before servicing.<br /> |-<br /> ![[File:Electrical Hazard Warning.png|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Electrical_Hazard_Warning.png]]<br /> [[File:Danger Warning.png|alt=DANGER|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Danger_Warning.png]]<br /> |'''Electrical Hazard'''<br /> *Energized components can cause electrical shock.<br /> *De-energize and lockout/tagout before servicing.<br /> |-<br /> ![[File:BE-SL and BE-DS Power Off-On.png|alt=BE-SL and BE-DS Power Off-On|frameless|180x180px|link=https://tech.bhs1.com/index.php/File:BE-SL_and_BE-DS_Power_Off-On.png]]<br /> |'''Power Off/On'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Horn Control.png|alt=BE-SL and BE-DS Horn Control |frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Horn_Control.png]]<br /> |'''Horn (If equipped)'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Vacuum Control.png|alt=BE-SL and BE-DS Vacuum Control |frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Vacuum_Control.png]]<br /> |'''Vacuum Off/On (If equipped)'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Magnet Extraction.png|alt=BE-SL and BE-DS Magnet Off/On|frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Magnet_Extraction.png]]<br /> |'''Magnet Off/On (If equipped)'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Powered Roller Cut Off Override.png|alt=BE-SL and BE-DS Powered Roller Cut Off Override|frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Powered_Roller_Cut_Off_Override.png]]<br /> |'''Powered Roller Cutout Override (If equipped)'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Rack-Level-Assist.png|alt=BE-SL and BE-DS Rack Level Assist |frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Rack-Level-Assist.png]]<br /> |'''Rack Level Assist Indicator (If equipped)'''<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> ! rowspan=&quot;3&quot; |[[File:IOP-400_BE-SL&amp;DS_(10-23)_Power_Rollers_and_Arm_Travel.png.png|alt=BE-SL &amp; DS Powered Roller and Arm Travel Controls|frameless|504x504px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Power_Rollers_and_Arm_Travel.png.png]]<br /> |'''Far Power Rollers'''<br /> |-<br /> |'''Arm Travel'''<br /> |-<br /> |'''Near Power Rollers'''<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> |+''BE-SL &amp; DS UNITS ONLY''<br /> ! colspan=&quot;3&quot; |[[File:IOP-400 BE-SL&amp;DS (10-23) BE-SL&amp;DS Units Platform Controls.png|alt=BE-SL &amp; DS Specific Controls|frameless|460x460px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_BE-SL&amp;DS_Units_Platform_Controls.png]]<br /> |-<br /> |Drive Forward/Reverse<br /> |Platform Raise/Lower<br /> |Arm Rotation Near/Far<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> |+''BE-TS &amp; QS UNITS ONLY''<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) BE-TS &amp; BE-QS Platform Raise and Lower Controls.png|alt=BE-TS &amp; BE-QS Platform Raise and Lower Controls|frameless|240x240px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_BE-TS_&amp;_BE-QS_Platform_Raise_and_Lower_Controls.png]]<br /> ! colspan=&quot;2&quot; |[[File:IOP-400 BE-SL&amp;DS (10-23)BE-TS &amp; BE-QS Specific Controls.png|alt=BE-TS &amp; BE-QS Specific-Controls|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)BE-TS_&amp;_BE-QS_Specific_Controls.png]]<br /> |-<br /> |Platform Raise/Lower<br /> |Drive Foward/Reverse<br /> |Arm Rotation Near/Far<br /> |}<br /> =&lt;big&gt;General Information&lt;/big&gt;=<br /> ==&lt;big&gt;Specification Data&lt;/big&gt;==<br /> [[File:BE-TS Specification Data.png|alt=IOP-401 BE-TS (10-23) Specification Data|frameless|600x600px]]<br /> {| class=&quot;wikitable&quot;<br /> | colspan=&quot;2&quot; |<br /> !BE-24-2-TS<br /> !BE-36-2-TS<br /> !BE-42-2-TS<br /> |-<br /> !A<br /> |Overall Length<br /> |156.5&quot;<br /> |180.5&quot;<br /> |192.5&quot;<br /> |-<br /> !B<br /> |Overall Width<br /> |72&quot;<br /> |72&quot;<br /> |72&quot;<br /> |-<br /> !C<br /> |Overall Height (Lowered)<br /> |158.188&quot;<br /> |158.188&quot;<br /> |160.688&quot;<br /> |-<br /> !<br /> |Overall Height (Raised w/ Overhead Guard)<br /> |182.375&quot;<br /> |182.375&quot;<br /> |182.375&quot;<br /> |-<br /> !<br /> |Overall Height (Raised w/ Strobe &amp; Alarm)<br /> |191.75&quot;<br /> |191.75&quot;<br /> |191.75&quot;<br /> |-<br /> !D<br /> |Wheel Base<br /> |98&quot;<br /> |122&quot;<br /> |134&quot;<br /> |-<br /> !E<br /> |Drive Wheel Center line<br /> |51&quot;<br /> |51&quot;<br /> |51&quot;<br /> |-<br /> !F<br /> |Battery Compartment Width<br /> |24&quot;<br /> |36&quot;<br /> |42&quot;<br /> |-<br /> !G<br /> |Ground Clearance<br /> |.625&quot;<br /> |.625&quot;<br /> |.625&quot;<br /> |-<br /> !H<br /> |Minimum Roller Height<br /> |6.5&quot;<br /> |6.5&quot;<br /> |6.5&quot;<br /> |-<br /> !I<br /> |Maximum Roller Height<br /> |96&quot;<br /> |96&quot;<br /> |96&quot;<br /> |-<br /> !J<br /> |Operator Platform Height (Lowered/Raised)<br /> |11&quot; / 103&quot;<br /> |11&quot; / 103&quot;<br /> |11&quot; / 103&quot;<br /> |}<br /> <br /> === UNITS WITH 10 HP POWER UNIT USED PRIOR TO DECEMBER, 2014 ===<br /> {| class=&quot;wikitable&quot;<br /> !<br /> !BE-24-2-TS<br /> !BE-36-2-TS<br /> !BE-42-2-TS<br /> |-<br /> |Travel Speed<br /> |0 to 190 ft/min / 0 to 0.97 m/s<br /> |0 to 190 ft/min / 0 to 0.97 m/s<br /> |0 to 190 ft/min / 0 to 0.97 m/s<br /> |-<br /> |Raise - Lower Speed<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |-<br /> |Powered Roller Speed<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |-<br /> |Arm Traverse Speed<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |-<br /> |Arm Rotation Time<br /> |6 s to 8 s<br /> |6 s to 8 s<br /> |6 s to 8 s<br /> |-<br /> |Draw Bar Pull / Vacuum<br /> <br /> (12&quot; / 305 mm Round Cup)<br /> |1,000 lb / 454 kg<br /> |1,000 lb / 454 kg<br /> |1,000 lb / 454 kg<br /> |-<br /> |Draw Bar Pull Magnet*<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |-<br /> |Vacuum Attach Time<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |-<br /> |Vacuum Release Time<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |-<br /> |Input Voltage<br /> |480 V / 3 ph / 60Hz<br /> |480 V / 3 ph / 60Hz<br /> |480 V / 3 ph / 60Hz<br /> |-<br /> |AC Current Draw<br /> |16.5 A<br /> |16.5 A<br /> |16.5 A<br /> |-<br /> |Control Circuit Voltage<br /> |120 V ac<br /> |120 V ac<br /> |120 V ac<br /> |-<br /> |Hydraulic Power Unit<br /> |10 hp / 7.46 kW<br /> |10 hp / 7.46 kW<br /> |10 hp / 7.46 kW<br /> |-<br /> |Hydraulic Pump<br /> |16 gal/min / 61 L/min<br /> |16 gal/min / 61 L/min<br /> |16 gal/min / 61 L/min<br /> |-<br /> |Power Unit<br /> |Hydraulic, Variable Displacement<br /> |Hydraulic, Variable Displacement<br /> |Hydraulic, Variable Displacement<br /> |-<br /> |Operating Pressure<br /> |1,500 psi / 103 bar<br /> |1,500 psi / 103 bar<br /> |1,500 psi / 103 bar<br /> |-<br /> |Vacuum Pump<br /> |1/3 hp / 0.25 kW<br /> |1/3 hp / 0.25 kW<br /> |1/3 hp / 0.25 kW<br /> |-<br /> |Vacuum<br /> |21&quot; Hg / 711 mbar<br /> |21&quot; Hg / 711 mbar<br /> |21&quot; Hg / 711 mbar<br /> |-<br /> |Full Load Capacity<br /> |10,000 lb / 4535 kg<br /> |10,000 lb / 4535 kg<br /> |10,000 lb / 4535 kg<br /> |-<br /> |Weight (Empty)<br /> |8,000 lb / 3629 kg<br /> |8,300 lb / 3765 kg<br /> |8,600 lb / 3901 kg<br /> |-<br /> |Total Compartment Rollers / Powered<br /> |11/5<br /> |11/5<br /> |11/5<br /> |-<br /> |Guide Track<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |-<br /> |Overall Dimensions (L x W x H)<br /> |156.5&quot; x 72&quot; x 158.188&quot;<br /> <br /> 3975 mm x 1829 mm x 4018 mm<br /> |180.5&quot; x 72&quot; x 158.188&quot;<br /> <br /> 4585 mm x 1829 mm x 4018 mm<br /> |192.5&quot; x 72&quot; x 160.688&quot;<br /> <br /> 4890 mm x 1829 mm x 4081 mm<br /> |-<br /> |Vacuum Arm Reach<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |-<br /> |Vacuum Arm Reach (Hydraulic Extension)<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |-<br /> |Magnet Arm Reach (Hydraulic Extension) Truck Side<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |-<br /> |Wheel Base<br /> |98&quot; / 2489 mm<br /> |122&quot; / 3099 mm<br /> |134&quot; / 3404 mm<br /> |-<br /> |Drive Wheel Center Line<br /> |51&quot; / 1295 mm<br /> |51&quot; / 1295 mm<br /> |51&quot; / 1295 mm<br /> |-<br /> |Battery Compartment Width<br /> |24&quot; / 610 mm<br /> |36&quot; / 915 mm<br /> |42&quot; / 1067 mm<br /> |-<br /> |Maximum Battery Dimensions<br /> <br /> (L x W x H)<br /> |48&quot; x 23&quot; x 34&quot;<br /> <br /> 1219 mm x 584 mm x 864 mm<br /> |48&quot; x 35&quot; x 34&quot;<br /> <br /> 1219 mm x 889 mm x 864 mm<br /> |48&quot; x 41&quot; x 34&quot;<br /> <br /> 1219 mm x 1041 mm x 864 mm<br /> |-<br /> |Minimum Battery Width<br /> <br /> (with vacuum / magnet)<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |-<br /> |Minimum Battery Height<br /> |17.75&quot; / 451 mm<br /> |17.75&quot; / 451 mm<br /> |17.75&quot; / 451 mm<br /> |-<br /> |Ground Clearance<br /> |0.63&quot; / 16 mm<br /> |0.63&quot; / 16 mm<br /> |0.63&quot; / 16 mm<br /> |-<br /> |Roller Height<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |-<br /> ! colspan=&quot;4&quot; |NOTES<br /> |-<br /> | colspan=&quot;4&quot; |''Specifications may vary ± 5% because of temperature, floor considerations, and operator efficiency. Values represented under normal operating conditions.''<br /> |-<br /> | colspan=&quot;4&quot; |''* Varies with battery case thickness and condition.''<br /> |}<br /> <br /> === UNITS WITH 20 HP POWER UNIT USED DECEMBER, 2014 TO PRESENT ===<br /> {| class=&quot;wikitable&quot;<br /> !<br /> !BE-24-2-TS<br /> !BE-36-2-TS<br /> !BE-42-2-TS<br /> |-<br /> |Travel Speed<br /> |0 to 240 ft/min / 0 to 1.22 m/s<br /> |0 to 240 ft/min / 0 to 1.22 m/s<br /> |0 to 240 ft/min / 0 to 1.22 m/s<br /> |-<br /> |Raise - Lower Speed<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |-<br /> |Powered Roller Speed<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |-<br /> |Arm Traverse Speed<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |-<br /> |Arm Rotation Time<br /> |6 s to 8 s<br /> |6 s to 8 s<br /> |6 s to 8 s<br /> |-<br /> |Draw Bar Pull / Vacuum<br /> <br /> (12&quot; / 305 mm Round Cup)<br /> |1,000 lb / 454 kg<br /> |1,000 lb / 454 kg<br /> |1,000 lb / 454 kg<br /> |-<br /> |Draw Bar Pull Magnet*<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |-<br /> |Vacuum Attach Time<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |-<br /> |Vacuum Release Time<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |-<br /> |Input Voltage<br /> |480 V / 3 ph / 60Hz<br /> |480 V / 3 ph / 60Hz<br /> |480 V / 3 ph / 60Hz<br /> |-<br /> |AC Current Draw<br /> |35 A<br /> |35 A<br /> |35 A<br /> |-<br /> |AC Current Draw w/ Electric Drive Option<br /> |42 A<br /> |42 A<br /> |42 A<br /> |-<br /> |Control Circuit Voltage<br /> |120 V ac<br /> |120 V ac<br /> |120 V ac<br /> |-<br /> |Hydraulic Power Unit<br /> |20 hp / 14.9 kW<br /> |20 hp / 14.9 kW<br /> |20 hp / 14.9 kW<br /> |-<br /> |Hydraulic Power Unit w/ Electric Drive Option<br /> |25 hp / 18.7 kW<br /> |25 hp / 18.7 kW<br /> |25 hp / 18.7 kW<br /> |-<br /> |Hydraulic Pump<br /> |22 gal/min / 83 L/min<br /> |22 gal/min / 83 L/min<br /> |22 gal/min / 83 L/min<br /> |-<br /> |Power Unit<br /> |Hydraulic, Variable Displacement<br /> |Hydraulic, Variable Displacement<br /> |Hydraulic, Variable Displacement<br /> |-<br /> |Operating Pressure<br /> |1,500 psi / 103 bar<br /> |1,500 psi / 103 bar<br /> |1,500 psi / 103 bar<br /> |-<br /> |Vacuum Pump<br /> |1/3 hp / 0.25 kW<br /> |1/3 hp / 0.25 kW<br /> |1/3 hp / 0.25 kW<br /> |-<br /> |Vacuum<br /> |21&quot; Hg / 711 mbar<br /> |21&quot; Hg / 711 mbar<br /> |21&quot; Hg / 711 mbar<br /> |-<br /> |Full Load Capacity<br /> |10,000 lb / 4535 kg<br /> |10,000 lb / 4535 kg<br /> |10,000 lb / 4535 kg<br /> |-<br /> |Weight (Empty)<br /> |8,000 lb / 3629 kg<br /> |8,300 lb / 3765 kg<br /> |8,600 lb / 3901 kg<br /> |-<br /> |Total Compartment Rollers / Powered<br /> |11/5<br /> |11/5<br /> |11/5<br /> |-<br /> |Guide Track<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |-<br /> |Overall Dimensions (L x W x H)<br /> |156.5&quot; x 72&quot; x 158.188&quot;<br /> <br /> 3975 mm x 1829 mm x 4018 mm<br /> |180.5&quot; x 72&quot; x 158.188&quot;<br /> <br /> 4585 mm x 1829 mm x 4018 mm<br /> |192.5&quot; x 72&quot; x 160.688&quot;<br /> <br /> 4890 mm x 1829 mm x 4081 mm<br /> |-<br /> |Vacuum Arm Reach<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |-<br /> |Vacuum Arm Reach (Hydraulic Extension)<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |-<br /> |Magnet Arm Reach (Hydraulic Extension) Truck Side<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |-<br /> |Wheel Base<br /> |98&quot; / 2489 mm<br /> |122&quot; / 3099 mm<br /> |134&quot; / 3404 mm<br /> |-<br /> |Drive Wheel Center Line<br /> |51&quot; / 1295 mm<br /> |51&quot; / 1295 mm<br /> |51&quot; / 1295 mm<br /> |-<br /> |Battery Compartment Width<br /> |24&quot; / 610 mm<br /> |36&quot; / 915 mm<br /> |42&quot; / 1067 mm<br /> |-<br /> |Maximum Battery Dimensions<br /> <br /> (L x W x H)<br /> |48&quot; x 23&quot; x 34&quot;<br /> <br /> 1219 mm x 584 mm x 864 mm<br /> |48&quot; x 35&quot; x 34&quot;<br /> <br /> 1219 mm x 889 mm x 864 mm<br /> |48&quot; x 41&quot; x 34&quot;<br /> <br /> 1219 mm x 1041 mm x 864 mm<br /> |-<br /> |Minimum Battery Width<br /> <br /> (with vacuum / magnet)<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |-<br /> |Minimum Battery Height<br /> |17.75&quot; / 451 mm<br /> |17.75&quot; / 451 mm<br /> |17.75&quot; / 451 mm<br /> |-<br /> |Ground Clearance<br /> |0.63&quot; / 16 mm<br /> |0.63&quot; / 16 mm<br /> |0.63&quot; / 16 mm<br /> |-<br /> |Roller Height<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |-<br /> ! colspan=&quot;4&quot; |NOTES<br /> |-<br /> | colspan=&quot;4&quot; |''Specifications may vary ± 5% because of temperature, floor considerations, and operator efficiency. Values represented under normal operating conditions.''<br /> |-<br /> | colspan=&quot;4&quot; |''* Varies with battery case thickness and condition.''<br /> |}<br /> ==&lt;big&gt;Pre-Installation Check&lt;/big&gt;==<br /> ===&lt;big&gt;&lt;u&gt;Floor Conditions&lt;/u&gt;&lt;/big&gt;===<br /> The floor is the single most critical area of the battery room.  A bad floor can cause significant issues with the installation as well as downtime and maintenance problems with the extractor.  The floor should be verified as to its minimum thickness and strength with user.  As noted on the drawing, the specific requirement of flatness for your particular type of system is listed. Below is a chart stating floor requirements.  If possible, especially on double stack and higher systems, a digital level should be used to shoot the grade for compliance with the specification.  The floor should also be inspected for severe cracks or excessively wide expansion joints in the travel path of the machine.  If floor drains are present, they must not have a grade to the opening that encroaches into the travel path. <br /> <br /> F-min is a rating method used to evaluate the flatness and levelness of a floor designated as &quot;defined travel path&quot;.  For example, an F-min rating of 60 means that there is no more than .129&quot; of variation in the transverse axis (wheels left to right) and .287&quot; variation in the longitudinal axis (front to back) on the equipment.<br /> <br /> To avoid potential damage to drive wheel assemblies, guide track, structural components, guide rollers  and issues with the inner frame equalization the &quot;defined travel path&quot; of the Battery Extractor should meet or exceed the recommended F-min specification. See chart below for the model specifications.<br /> {| class=&quot;wikitable&quot;<br /> !Model<br /> !F-Min<br /> !+/- Longitudinal<br /> !+/- Transverse<br /> !Slope Defect<br /> |-<br /> |SL, DS<br /> |40<br /> |.287&quot;<br /> |.192&quot;<br /> |.096&quot;<br /> |-<br /> |TS<br /> |60<br /> |.186&quot;<br /> |.129&quot;<br /> |.066&quot;<br /> |-<br /> |QS<br /> |85<br /> |.131&quot;<br /> |.091&quot;<br /> |.047&quot;<br /> |}[[File:IOP-400 BE-SL&amp;DS (10-23) Floor Conditions Pre-Installation Check.png|alt=BE-TS Floor Conditions Pre-Installation Check|frameless|500x500px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Floor_Conditions_Pre-Installation_Check.png]]<br /> ==&lt;big&gt;Operating Controls &amp; Instructions&lt;/big&gt;==<br /> <br /> === &lt;big&gt;&lt;u&gt;Operator Console&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Operator Console.png|alt=BE-TS Operator Console|frameless|1080x1080px]]<br /> <br /> '''''NOTE:''' Safety devices for the machine and the machine operating area SHALL NOT be rendered inoperable or misused.'' <br /> <br /> ''Typical BE-TS operator console shown above. Position of optional controls may vary from that shown depending on age of unit and/or combination of optional controls present.''<br /> <br /> ''HMI display standard on units shipped after February, 2020 for Industrial Internet of Things (IIoT) package.''<br /> <br /> ==== &lt;u&gt;&lt;big&gt;Safety Features&lt;/big&gt;&lt;/u&gt; ====<br /> &lt;u&gt;Key Switch&lt;/u&gt; – Located on the dash (see above).  Primary on/off switch to prevent unauthorized personnel from operating the BE.<br /> <br /> &lt;u&gt;Emergency Stop&lt;/u&gt; – Located on the dash (see above). Will stop all functions immediately, locking all hydraulics in place. To use, press down on the red button. The machine key must be used to reset the emergency stop.<br /> <br /> &lt;u&gt;Foot Switch&lt;/u&gt; – Must be depressed to operate the BE.  Stepping off the foot switch will stop all functions immediately, locking all hydraulics in place.  To resume use, depress the foot switch.<br /> <br /> &lt;u&gt;Gate Switch&lt;/u&gt; – The gate must be fully closed for the BE to operate.<br /> <br /> &lt;u&gt;Extractor Arm Switch&lt;/u&gt; – Does not permit the machine to move forward or backward unless the extractor arm is located in the center of the carriage between the indicating arrows located on the arm guard.<br /> <br /> &lt;u&gt;Powered Roller Cutout (PRC-1 or PRC-2) ''(if equipped)''&lt;/u&gt; – Disengages the powered roller function when the photo eye positioned on the edge of the BE battery compartment is disrupted by a battery, requiring additional input from the operator. Pressing the &quot;Power Roller Cutout&quot; override button (see above) on the dash will resume  powered roller operation when loading or unloading batteries from the BE carriage.<br /> <br /> &lt;u&gt;Horn ''(If equipped)''&lt;/u&gt; – Button located on the dash (see above).  Used to alert personnel before moving the BE.<br /> <br /> &lt;u&gt;Strobe Light ''(If equipped)''&lt;/u&gt; – Located on a vertical stanchion mounted to the right rear of the operator compartment. For units equipped with optional overhead guard (OHG), the beacon is located above of the operator compartment.  Beacon automatically flashes when the BE is switched on to visually notify the BE is in use.<br /> <br /> &lt;u&gt;Audible Alarm ''(if equipped)''&lt;/u&gt; – Mounted in the same location as the Strobe Light.  Automatically sounds when the BE is switched on to notify personnel that the BE is in use.<br /> <br /> &lt;u&gt;Blue Light ''(if equipped)''&lt;/u&gt; - Mounted at an elevated position on either end of the extractor which project a bright, highly concentrated blue beam pattern on the ground visually alerting personnel to the direction the extractor is moving.<br /> <br /> === &lt;big&gt;&lt;u&gt;Operation Overview&lt;/u&gt;&lt;/big&gt; ===<br /> <br /> * All operators should be familiar with the operator console of the extractor before performing any battery changes.  The controls of the console are simple and well marked.  It consists of six, manually operated, hydraulic control valves and a three position selector switch which controls the left and right vacuum cups (or optional magnets).<br /> * The operator shall make certain there are no persons or obstacles in the extractor path prior to traveling forward or reverse.<br /> * All manual valves are moved in the direction of the function travel which it controls with exception of the lift/lower valve, which is pulled toward the operator for &quot;up&quot; and pushed away for &quot;down.&quot;<br /> * In the event of any failure or malfunction, step off the dead-man switch or press the E-stop button and all functions will stop immediately, locking all hydraulics in place.<br /> * The extractor arm must be in the center of the carriage or the unit will not travel forward or reverse.<br /> * To ensure smooth operation, all valve movements should be made in a slow, deliberate motion.<br /> * Only one key should be provided to operate the extractor.<br /> * When leaving the machine, the operator shall turn off the key switch, remove the key and logout out of the IIoT (if equipped) to prevent unauthorized use<br /> * Ensure all the batteries and cables are properly stored in the battery stands prior to moving the BE.<br /> * The BE is designed to carry only one battery in each compartment on the carriage.<br /> * When loading the BE, position the batteries in the center of the compartments on the powered rollers to prevent any battery movement when transporting.<br /> * Ensure there are no projections outside of the carriage before moving the BE.<br /> <br /> === &lt;u&gt;&lt;big&gt;Operating Instructions&lt;/big&gt;&lt;/u&gt; ===<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Pre-Change Out Preparation&lt;/u&gt;&lt;/big&gt; ====<br /> 1. Position lift truck for change out in designated area.<br /> <br /> 2. Remove all battery restraints and disconnect battery cables following manufacturers guidelines.  (Be sure to position battery cables so as not to be damaged by the battery during change out.)<br /> <br /> 3. Board battery extractor and close safety gate.  (Gate must be fully closed or unit will not operate.)<br /> <br /> 4. Turn key switch to &quot;ON&quot; position. <br /> <br /> 5. Log in on the HMI display (if equipped with BE-IIoT package).<br /> <br /> 6. Depress foot pedal.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Discharged Battery Removal&lt;/u&gt;&lt;/big&gt; ====<br /> 1. Move extractor forward or reverse to position center of empty compartment with center of lift truck battery compartment. (Lead roller of extractor is equipped with a centering groove.  Users may find it beneficial to mark center of lift truck compartment to aid in alignment.)<br /> <br /> 2. Align extractor's roller compartment height with lift truck's battery compartment.<br /> <br /> 3. Rotate extractor arm into battery compartment aligned in Step 2.<br /> <br /> 4. Move extractor arm toward battery until vacuum cup/magnet contacts battery.<br /> <br /> [[File:NOTICE-warn.png|alt=NOTICE|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:NOTICE-warn.png]] '''DO NOT force cup/magnet into battery after initial contact with battery is made.'''<br /> <br /> 5. Energize vacuum/magnet by turning selector switch to proper direction, left or right.<br /> <br /> 6. Move extractor arm away from lift truck toward center of extractor roller bed, removing discharged battery.  (Battery should be pulled past first three idler rollers onto first or second powered roller.)<br /> <br /> 7. Turn off vacuum/magnet and move extractor arm away from battery 1&quot; to 2&quot;.<br /> <br /> 8. Rotate extractor arm out of battery compartment into opposite compartment (if empty) and center arm in carriage.<br /> <br /> 9. Move battery into center of compartment using powered rollers.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Charged Battery Retrieval&lt;/u&gt;&lt;/big&gt; ====<br /> 1. Locate charged battery for appropriate type of lift truck being changed.<br /> <br /> 2. Raise battery extractor roller compartment to proper level to gain access as needed to disconnect desired battery from its charger and disengage battery safety stop.<br /> <br /> [[File:WARNING-warn.png|alt=WARNING|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:WARNING-warn.png]] '''ALWAYS be sure charging has been completed and charger is not still charging battery. Dangerous sparking/arcing can occur if battery is unplugged from charger while charging.'''<br /> <br /> 3. Move extractor to appropriate rack position and align empty roller compartment with the center of the battery storage rack compartment.  ''(The battery safety stop of each compartment is the center of that compartment and should be used for alignment with the groove in the lead roller of the battery extractor compartment.'') <br /> <br /> 4. Rotate arm into empty compartment (if not already positioned there.)<br /> <br /> 5. Move extractor arm toward battery until vacuum cup/magnet contacts battery.<br /> <br /> 6. Energize vacuum cup/magnet by turning selector switch to proper direction, left or right.<br /> <br /> [[File:NOTICE-warn.png|alt=NOTICE|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:NOTICE-warn.png]] '''DO NOT force cup/magnet into battery after initial contact with battery is made.'''<br /> <br /> 7. Move extractor arm away from battery rack toward center of extractor roller bed, removing charged battery.  (Battery should be pulled past first three idler rollers onto first or second powered roller.)<br /> <br /> 8. Turn off vacuum/magnet and move extractor arm away from battery 1&quot; to 2&quot;.<br /> <br /> 9. Rotate extractor arm out of battery compartment into fully vertical position.<br /> <br /> 10. Move battery into center of compartment using powered rollers.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Discharged Battery Return&lt;/u&gt;&lt;/big&gt; ====<br /> 1. If required, adjust extractor compartment height to battery rack level with open battery compartment.  Drive extractor to align roller compartment containing discharged battery with open battery compartment.<br /> <br /> 2. Return discharged battery to battery rack using powered rollers.<br /> <br /> '''''NOTE:''''' ''In most instances, batteries can be deposited into battery racks in one motion using only powered rollers.  When this does not work, the battery may need slight assistance from extractor arm.  To do this, rotate arm into compartment such as one would if removing battery from rack.  If extractor is vacuum equipped, position top edge of cup slightly higher than edge of battery (or over lifting eye if so equipped) to prevent cup from adhering to battery - No vacuum/magnet is necessary for pushing. DO NOT activate vacuum/magnet switch.  Slowly push battery into rack until fully into compartment.''<br /> <br /> 3. Engage battery safety stop and connect battery to charger as required.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Charged Battery Installation&lt;/u&gt;&lt;/big&gt; ====<br /> 1. Lower extractor to fully lowered position.<br /> <br /> 2. Drive extractor back to lift truck and align roller compartment containing charged battery as performed in steps 1 and 2 of &quot;Discharged Battery Removal&quot;.<br /> <br /> 3. Move charged battery toward lift truck compartment by using powered rollers, verifying precise battery alignment.<br /> <br /> [[File:NOTICE-warn.png|alt=NOTICE|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:NOTICE-warn.png]] '''Many batteries are a tight fit into lift truck battery compartments. Care MUST be taken to ensure alignment is precise to avoid damage to battery, lift truck, and/or battery extractor.'''<br /> <br /> 4. Adjust extractor vertically as well as horizontally, if needed<br /> <br /> 5. Insert battery into lift truck as far as possible using only the powered rollers.<br /> <br /> 6. Rotate extractor arm into compartment and SLOWLY push battery into lift truck.  (Be sure to watch battery cables for interference.)<br /> <br /> 7. Return extractor arm to center of roller bed and lower extractor to fully lowered position.  Drive extractor out of immediate area.<br /> <br /> 8. Turn off key switch, remove key from switch, log out on the HMI display (if equipped with BE-IIoT package) and carefully exit extractor.<br /> <br /> 9. Secure newly installed battery in lift truck and reconnect battery cables.<br /> <br /> 10. Return lift truck to service<br /> {|<br /> ![[File:Caution-Warning.png|alt=CAUTION|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:Caution-Warning.png]]<br /> |'''DO NOT drive the BE into the travel path end stops. The end stops are designed to prevent the BE from accidentally traveling beyond its designated travel path. Driving the BE into the end stops will cause the BE to stop suddenly, possibly causing damage to the end stop, the BE and/or personal injury.'''<br /> |}<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Optional Powered Roller Cutout Operation&lt;/u&gt;&lt;/big&gt; ====<br /> Units equipped with optional Powered Roller Cutout, the powered roller override button must be depressed in addition to actuating the hydraulic valve when a battery disrupts the photo eye(s) at the edge of the battery compartments while using the powered rollers to transfer batteries on and off of the battery extractor.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;IIoT Equipped Units&lt;/u&gt;&lt;/big&gt; ====<br /> Units shipped after February, 2020 are equipped with BE-IIoT (Industrial Internet of Things) package. Operators must log in to the BE-IIoT system using the HMI (Human Machine Interface) display located on the dashboard to operate the extractor.<br /> <br /> When finished operating the extractor, the operator should log out of the BE-IIoT to prevent unauthorized access and/or operation of the extractor.<br /> <br /> == &lt;big&gt;Manual Unloading&lt;/big&gt; ==<br /> '''Lockout/tagout and de-energize all equipment prior to manually unloading any battery.'''<br /> <br /> In the event of power loss or an operational malfunction of the BE not allowing a battery to be unloaded using normal operating procedures, it is recommended a battery be removed from the BE using certified and approved vertical extraction methods and devices.<br /> {|<br /> |[[File:DANGER-warn.png|alt=DANGER|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:DANGER-warn.png]]<br /> |'''Read, understand and observe all safety warnings and procedures related to the vertical extraction device(s) being used.'''<br /> |}<br /> Should the status of the BE not allow for safe vertical extraction (due to position in the battery aisle or level of the inner carriage), only repairs required to safely maneuver the BE to a position allowing for safe vertical extraction should be made.  Once any batteries are safely unloaded, any remaining repairs can be made.<br /> {|<br /> |[[File:DANGER-warn.png|alt=DANGER|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:DANGER-warn.png]]<br /> |'''Extreme care should be taken when working under or around equipment supporting elevated loads. Unexpected movement of the equipment could cause the load and/or equipment to fall. ALWAYS be sure devices of adequate size and strength are in place to prevent any personnel working under the elevated load from being crushed. Serious personal injury or death will occur.'''<br /> |}<br /> <br /> == &lt;big&gt;Spare Parts List&lt;/big&gt; ==<br /> Use only BHS approved replacement parts.<br /> <br /> Refer to the appropriate Spare Parts Kit (vacuum equipped units - Pt# BE-SPKV-TS, magnet equipped units - Pt# BE-SPKM-TS) for the list of items recommended by BHS to have on hand for BE-TS models to minimize any downtime due to minor breakdowns that may occur under normal operating conditions.<br /> <br /> BHS offers many replacement parts kits containing relevant or related parts when replacing certain individual parts or replacing any obsolete / upgraded parts.<br /> <br /> BHS also offers a supplement hose kit (Pt# 80342003) which contains an assortment of hoses allowing any hose on the extractor to be replaced immediately with a temporary hose of equal length or longer. After the extractor is back up and running, the failed hose can be taken to have an exact replacement made. Once the new hose is made and installed, the temporary hose can be returned to the kit for future use.<br /> <br /> Go to [[www.bhs1.com]] and click &quot;Parts&quot; for all the latest parts kits and corresponding installation instructions (if applicable).<br /> <br /> BHS recommends that a full maintenance inspection report similar to the one provided be done at least once a month.<br /> <br /> Any parts found to be excessively worn or damaged should promptly be replaced unless said parts pose a safety risk to the operator and/or extractor, in which case the unit should be removed from service until the problem(s) are remedied (See<br /> <br /> Operator's Daily Checklist.)<br /> <br /> ''Note: Spare parts kits contain parts for the most current machine design/configuration. Due to continuous design and manufacturing updates and improvements, not all the parts in the spare parts kits may be compatible with older units. Consult factory when ordering spare or replacement parts for existing units in the field to ensure part compatibility.''<br /> <br /> = &lt;big&gt;Parts Sections&lt;/big&gt; =<br /> <br /> == &lt;big&gt;Chassis&lt;/big&gt; ==<br /> <br /> === &lt;big&gt;&lt;u&gt;Equalization Components&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Equalization Components.png|alt=BE-TS Chassis Equalization|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PT0222-1<br /> |LINK-CONNECTING-#60<br /> |<br /> |<br /> |8<br /> |-<br /> |2<br /> |HW0017<br /> |NUT-HEX-3/4-10<br /> |<br /> |<br /> |8<br /> |-<br /> |3<br /> |HW0115<br /> |WASHER-LOCK-3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |43097001<br /> |STUD-ANCHOR-5&quot;<br /> |<br /> |''Upper''<br /> |4<br /> |-<br /> |5<br /> |HW0020<br /> |NUT-JAM-3/4-10<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43097002<br /> |STUD-ANCHOR-2&quot;<br /> |<br /> |''Lower''<br /> |4<br /> |-<br /> |7<br /> |00158001-14<br /> |CHAIN-ROLLER-#60<br /> |<br /> |<br /> |4<br /> |}<br /> [[File:BE-TS Equalization Components - 1.0.2.png|alt=BE-TS Chassis Equalization 2|frameless|575x575px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PT0416<br /> |COLLAR-SHAFT-1 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |2<br /> |43097006<br /> |KEY-3/8&quot; X 2 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |PT0224<br /> |SPROCKET-60B12 X 1 1/2&quot;<br /> |<br /> |''Keyed in line''<br /> |8<br /> |-<br /> |4<br /> |PT0405<br /> |FLANGE BEARING-2 BOLT-1 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1 1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |6<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> | rowspan=&quot;4&quot; |7<br /> |43127001<br /> |SHAFT-EQUALIZATION-81.75&quot;<br /> |<br /> |''BE-24-2-TS''<br /> |2<br /> |-<br /> |43327001<br /> |SHAFT-EQUALIZATION-105.75&quot;<br /> |<br /> |''BE-36-2-TS''<br /> |2<br /> |-<br /> |44327001<br /> |SHAFT-EQUALIZATION-117.75&quot;<br /> |<br /> |''BE-42-2-TS''<br /> |2<br /> |-<br /> |44527001<br /> |SHAFT-EQUALIZATION-75.75&quot;<br /> |<br /> |''BE-42-1-TS''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |8<br /> |PT0503<br /> |BEARING-FLANGED LOAD-2 1/4&quot;<br /> |<br /> |''Used after December 2003''<br /> |8<br /> |-<br /> |43026001<br /> |BEARING-FLANGED LOAD-2 1/4&quot; ''(MACHINED)''<br /> |<br /> |''Used prior to December 2003''<br /> |8<br /> |-<br /> |9<br /> |HW0025<br /> |NUT-JAM-7/8-14<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0117<br /> |WASHER-LOCK-7/8&quot; ''(NOT SHOWN)''<br /> |<br /> |''Used prior to August 2002''<br /> |8<br /> |}<br /> <br /> === &lt;u&gt;'''&lt;big&gt;Bridge &amp; Cross Bar&lt;/big&gt;'''&lt;/u&gt; ===<br /> [[File:BE-TS Bridge and Cross Bar.png|alt=BE-TS Bridge and Cross Bar|frameless|524x524px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1 1/4&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |2<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |20<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |20<br /> |-<br /> |4<br /> |HW0515<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |''Fully Threaded''<br /> |8<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> === &lt;u&gt;'''&lt;big&gt;Lift Cylinder Connections&lt;/big&gt;'''&lt;/u&gt; ===<br /> [[File:BE-TS Lift Cylinder Connections.png|alt=BE-TS Lift Cylinder Connections|frameless|589x589px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |00158001-13<br /> |CHAIN-ROLLER-#80<br /> |<br /> |<br /> |4<br /> |-<br /> |2<br /> |HW0014<br /> |NUT-HEX-1-8<br /> |<br /> |<br /> |8<br /> |-<br /> |3<br /> |43897002<br /> |STUD-LIFT-INNER FRAME<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |PT0204<br /> |LINK-CONNECTING-#80<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |43897001<br /> |STUD-LIFT-OUTER FRAME<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43815018<br /> |BRACKET-CYLINDER SUPPORT<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |SS0761<br /> |U-BOLT-CYLINDER MOUNTING<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |12<br /> |-<br /> |9<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |10<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |8<br /> |-<br /> | rowspan=&quot;2&quot; |11<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |<br /> |''Idler caster end of unit'' <br /> |2<br /> |-<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |''Drive wheel end of unit'' <br /> |2<br /> |-<br /> |12<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |14<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |43822002<br /> |CLEVIS ASSEMBLY<br /> |<br /> |''Sold as assembly only''<br /> |4<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Guidance Arm&lt;/big&gt;&lt;/u&gt;''' ===<br /> [[File:BE-TS Guidance Arm.png|alt=BE-TS Guidance Arm|frameless|562x562px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> ! colspan=&quot;2&quot; |NO. REQ<br /> |-<br /> |1<br /> |43015011<br /> |GUIDE ARM WELDMENT, 2 ROLLER<br /> |<br /> |<br /> |2<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |2<br /> |43017025<br /> |SPACER-GUIDE ARM<br /> |<br /> |''† 1/2&quot; thick''<br /> |4<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |3<br /> |41215204<br /> |GUIDE ARM WELDMENT, 4 ROLLER<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |2<br /> |-<br /> |4<br /> |41217274<br /> |SPACER-GUIDE ARM<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |4<br /> |-<br /> |5<br /> |43012007<br /> |CAM ROLLER-1 3/4&quot;<br /> |<br /> |<br /> |4<br /> |8<br /> |-<br /> |6<br /> |HW0115<br /> |WASHER-LOCK-3/4&quot;<br /> |<br /> |<br /> |4<br /> |8<br /> |-<br /> |7<br /> |HW0011<br /> |NUT-HEX-3/4-16<br /> |<br /> |<br /> |4<br /> |8<br /> |-<br /> |8<br /> |HW0509<br /> |BOLT-HHCS-1/2-13 X 4-1/2&quot;<br /> |<br /> |<br /> |4<br /> |6<br /> |-<br /> |9<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |6<br /> |-<br /> |10<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |4<br /> |6<br /> |-<br /> |11<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |4<br /> |6<br /> |-<br /> |12<br /> |41215234<br /> |GUIDE ARM WELDMENT (POLY)<br /> |<br /> |<br /> |2<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |13<br /> |41217317<br /> |POLY SLIDE MOUNTING BLOCK<br /> |<br /> |<br /> |4<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |14<br /> |41217318<br /> |POLY SLIDE<br /> |<br /> |<br /> |4<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |15<br /> |HW0501<br /> |BOLT-HHCS-1/2-13 X 1&quot;<br /> |<br /> |<br /> |12<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |16<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |12<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |17<br /> |91253A546<br /> |BOLT FHSCS-1/4-20 X 1-1/2&quot;<br /> |<br /> |<br /> |8<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |18<br /> |HW0003<br /> |NUT-NILN-1/4-20<br /> |<br /> |<br /> |8<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> ! colspan=&quot;7&quot; |NOTES<br /> |-<br /> | colspan=&quot;7&quot; |''† Older units equipped with (1) 1&quot; thick spacer per guide arm bracket.'' <br /> |-<br /> | colspan=&quot;7&quot; |''†† Multiple styles of guide arms have been utilized on extractors. Refer to the parts diagrams for correct replacement parts.'' <br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Roller Bed Componenets&lt;/big&gt;&lt;/u&gt;''' ===<br /> ==== '''&lt;big&gt;''Idler Rollers''&lt;/big&gt;''' ====<br /> [[File:BE-TS Idler Rollers.png|alt=BE-TS Idler Rollers|frameless|746x746px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;3&quot; |1<br /> |43182001<br /> |LEAD ROLLER ASSEMBLY-24&quot;<br /> |<br /> |''With alignment groove''<br /> |4<br /> |-<br /> |43382001<br /> |LEAD ROLLER ASSEMBLY-36&quot;<br /> |<br /> |''With alignment groove''<br /> |4<br /> |-<br /> |43482001<br /> |LEAD ROLLER ASSEMBLY-42&quot;<br /> |<br /> |''With alignment groove''<br /> |4<br /> |-<br /> | rowspan=&quot;3&quot; |2<br /> |43182002<br /> |IDLER ROLLER ASSEMBLY-24&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |43382002<br /> |IDLER ROLLER ASSEMBLY-36&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |43482002<br /> |IDLER ROLLER ASSEMBLY-42&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> | rowspan=&quot;3&quot; |3<br /> |43187002<br /> |SHAFT-HEX-.75&quot; X 25.75&quot;<br /> |<br /> |''24&quot; compartments''<br /> |8<br /> |-<br /> |43387002<br /> |SHAFT-HEX-.75&quot; X 37.75&quot;<br /> |<br /> |''36&quot; compartments''<br /> |8<br /> |-<br /> |43487002<br /> |SHAFT-HEX-.75&quot; X 43.75&quot;<br /> |<br /> |''42&quot; compartments''<br /> |8<br /> |-<br /> | rowspan=&quot;3&quot; |4<br /> |43187003<br /> |SHAFT-HEX-.75&quot; X 27.5&quot;<br /> |<br /> |''24&quot; compartments''<br /> |4<br /> |-<br /> |43387003<br /> |SHAFT-HEX-.75&quot; X 39.5&quot;<br /> |<br /> |''36&quot; compartments''<br /> |4<br /> |-<br /> |43487003<br /> |SHAFT-HEX-.75&quot; X 45.5&quot;<br /> |<br /> |''42&quot; compartments''<br /> |4<br /> |-<br /> |5<br /> |HW1058<br /> |PIN-HITCH<br /> |<br /> |<br /> |24<br /> |}<br /> '''&lt;big&gt;''Powered Rollers''&lt;/big&gt;'''<br /> <br /> [[File:BE-TS Powered Rollers.png|alt=BE-TS Powered Rollers|frameless|546x546px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;3&quot; |1<br /> |43182003<br /> |POWERED ROLLER-24&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |43382003<br /> |POWERED ROLLER-36&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |43485003<br /> |POWERED ROLLER-42&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |2<br /> |43087001<br /> |JOURNAL-POWERED ROLLER<br /> |<br /> |<br /> |10<br /> |-<br /> |3<br /> |PT0404<br /> |FLANGE BEARING-3-BOLT-1&quot;<br /> |<br /> |<br /> |20<br /> |-<br /> |4<br /> |HW0321<br /> |BOLT-HHCS-5/16-18 X 1 1/4&quot;<br /> |<br /> |<br /> |60<br /> |-<br /> |5<br /> |HW0105<br /> |WASHER-LOCK-5/16&quot;<br /> |<br /> |<br /> |60<br /> |-<br /> |6<br /> |HW0004<br /> |NUT-HEX-5/16-18<br /> |<br /> |<br /> |60<br /> |-<br /> |7<br /> |PT0033<br /> |SPROCKET-35B18 X 1&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |8<br /> |00197028<br /> |KEY-1/4&quot; X 1 1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |00158001-16<br /> |CHAIN-ROLLER-#35<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |PT0031<br /> |LINK-CONNECTING-#35<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |PT0418<br /> |COLLAR-SHAFT-1&quot;<br /> |<br /> |<br /> |10<br /> |}<br /> [[File:BE-TS Powered Rollers Detail A.png|alt=BE-TS Powered Rollers Detail A|frameless|542x542px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0120<br /> |MOTOR-HYDRAULIC-160CC<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW1071<br /> |KEY-WOODRUFF-#808 STD<br /> |<br /> |''Supplied with Item 1''<br /> |A/R<br /> |-<br /> |3<br /> |H1544<br /> |ADAPTER-#6 JICM X #10 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |18<br /> |-<br /> |5<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |18<br /> |-<br /> |6<br /> |43017004<br /> |PLATE-MOTOR MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |PT0302-1<br /> |COUPLING BODY-#40 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |PT0301<br /> |CHAIN-COUPLING-#40<br /> |<br /> |''Includes connecting pin''<br /> |2<br /> |-<br /> |9<br /> |00197026<br /> |KEY-1/4&quot; X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43097003<br /> |KEY-1/4&quot; X 5/8&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Hose Carrier&lt;/big&gt;&lt;/u&gt;''' ===<br /> [[File:BE-TS Hose Carrier.png|alt=BE-TS Hose Carrier|frameless|550x550px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PT0629<br /> |CARRIER TRACK<br /> |<br /> |''81 links required''<br /> |10'<br /> |-<br /> |2<br /> |PT0631<br /> |BRACKET-UPPER MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0212<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0032<br /> |NUT-NILN-#10-24<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |PT0630<br /> |BRACKET-LOWER MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |7<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |43817056-2<br /> |BRACKET-CARRIER TRACK MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |HW0401<br /> |BOLT-HHCS-3/8-16 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |14<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |43817057<br /> |PLATE-CARRIER TRACK SUPPORT<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === &lt;big&gt;'''&lt;u&gt;Cable Retractor&lt;/u&gt;'''&lt;/big&gt; ===<br /> [[File:BE-TS Cable Retractor.png|alt=BE-TS Cable Retractor|frameless|585x585px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |CCR-12HD<br /> |TAKE UP REEL-CARRIER TRACK<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Operator Gate&lt;/big&gt;&lt;/u&gt;''' ===<br /> [[File:BE-TS Discontinued Drop Bar Operator Gate.png|alt=BE-TS Discontinued Drop Bar Operator Gate|frameless|568x568px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43015004<br /> |GATE-OPERATOR<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0407<br /> |BOLT-HHCS-3/8-16 X 2 3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |<br /> |<br /> |1<br /> |}<br /> [[File:BE-TS Operator Gate Continued.png|alt=BE-TS Operator Gate Continued|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43017064-2<br /> |LATCH-SWING GATE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0418<br /> |BOLT-HHCS-3/8-16 X 2 1/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0031<br /> |NUT-LOCK-3/8-16<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |N/A<br /> |HINGE-SPRING<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |5<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |HW1037<br /> |STOP-GATE<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0003<br /> |NUT-NILN-1/4-20<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |N/A<br /> |TORSION SPRING<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |11<br /> |HW0816<br /> |SCREW-HHCS-SELF DRILLING-#10 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |43806001<br /> |ANTI-FATIGUE MAT<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |43017058-2<br /> |THRESHOLD<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |HW0107<br /> |WASHER-LOCK3/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |HW9002<br /> |GAS SPRING<br /> |80292015<br /> |<br /> |1<br /> |-<br /> |19<br /> |43017086-2<br /> |BRACKET-MOUNTING-SPRING<br /> |80292015<br /> |<br /> |2<br /> |-<br /> |20<br /> |HW0815<br /> |SCREW-SELF DRILLING-#12-24 X 1&quot; T-4<br /> |80292015<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Part Discontinued. Spring Hinge and Torsion Spring must be replaced with Gas Spring Kit.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Guarding&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Outer Carriage Guards&lt;/big&gt;''''' ====<br /> <br /> ===== '''''1-Piece Outside Frame Guarding''''' =====<br /> [[File:BE-TS Outside Frame Guard 1-Piece.png|alt=BE-TS Outside Frame Guard 1-Piece|frameless|550x550px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817038<br /> |GUARD-FAR END-TOP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817037<br /> |GUARD-FAR END-MIDDLE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43817035<br /> |GUARD-FAR END-BOTTOM<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |33<br /> |}<br /> <br /> ===== '''''Split Outside Frame Guarding''''' =====<br /> [[File:BE-TS Outside Split Frame Guard.png|alt=BE-TS Outside Split Frame Guard|frameless|562x562px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817103<br /> |GUARD-FAR END-TOP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817102<br /> |GUARD-FAR END-MIDDLE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43817101<br /> |GUARD-FAR END-BOTTOM<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |37<br /> |}<br /> <br /> ==== '''&lt;big&gt;''Inner Carriage Guards''&lt;/big&gt;''' ====<br /> <br /> ===== '''''Inner Carriage Guards (Rotary Actuator)''''' =====<br /> [[File:BE-TS Inner Carriage Guard Rotary.png|alt=BE-TS Inner Carriage Guard (Rotary Actuator Units)|frameless|554x554px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817041-2<br /> |GUARD-FRONT-OPERATOR CONSOLE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817042-2<br /> |GUARD-INNER-FRAME<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |43014006-2<br /> |GUARD-LINEAR DRIVE SCREW<br /> |<br /> |<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |4<br /> |43017010-2<br /> |GUARD-SIDE-ARM CARRIER SHAFT<br /> |<br /> |<br /> |2<br /> |-<br /> |44517002-2<br /> |GUARD-SIDE-ARM CARRIER SHAFT<br /> |<br /> |''† Single compartment units only''<br /> |1<br /> |-<br /> |5<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |34<br /> |-<br /> |6<br /> |43017009-2<br /> |BRACKET-SCREW GUARD MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Single Compartment Guard replaces standard, Far Side Arm Carrier Shaft Guard.'' <br /> |}<br /> '''''Inner Carriage Guards (Helical Actuator)'''''<br /> <br /> [[File:BE-TS Inner Carriage Guard Helical Actuator.png|alt=BE-TS Inner Carriage Guard (Helical Actuator Units)|frameless|547x547px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817041-2<br /> |GUARD-FRONT-OPERATOR CONSOLE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817042-2<br /> |GUARD-INNER-FRAME<br /> |<br /> |<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |3<br /> |43017081-2<br /> |GUARD-SIDE-ARM CARRIER SHAFT<br /> |<br /> |<br /> |2<br /> |-<br /> |44517003-2<br /> |GUARD-SIDE-ARM CARRIER SHAFT<br /> |<br /> |''† Single compartment units only''<br /> |1<br /> |-<br /> |4<br /> |43017080-2<br /> |BRACKET-SIDE GUARD MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |43017082-3<br /> |MOUNT-CHAIN GUARD-LEAD SCREW<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43017082-4<br /> |MOUNT-CHAIN GUARD-LEAD SCREW<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |43017083-2<br /> |GUARD-CHAIN-LEAD SCREW<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0347<br /> |BOLT-BHSCS-1/4-20 X 3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |28<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Single Compartment Guard replaces standard, Far Side Arm Carrier Shaft Guard.'' <br /> |}<br /> <br /> ==== '''&lt;big&gt;''Dash &amp; Platform Guards''&lt;/big&gt;''' ====<br /> [[File:BE-TS Dash &amp; Platform Guards.png|alt=BE-TS Dash &amp; Platform Guards|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41614004-2<br /> |DASHBOARD-OPERATOR CONSOLE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817040<br /> |KICK PLATE-OPERATOR CONSOLE<br /> |<br /> |''41.5&quot; high''<br /> |1<br /> |-<br /> |3<br /> |43817086-2<br /> |DASHBOARD-OPERATOR CONSOLE<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43817088<br /> |KICK PLATE-OPERATOR CONSOLE<br /> |<br /> |''33.5&quot;'' ''high''<br /> |1<br /> |-<br /> |5<br /> |43817110-2<br /> |FRAME-DASHBOARD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |A/R<br /> |PLATE-DASHBOARD<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |7<br /> |HW0060<br /> |NUT-CLIP-#10-24<br /> |<br /> |<br /> |12<br /> |-<br /> |8<br /> |SS0114<br /> |BHSCS-#10-24 X 1/2&quot;-SST<br /> |<br /> |<br /> |12<br /> |-<br /> |9<br /> |PL0602<br /> |VINYL EDGING<br /> |<br /> |''At Foot Switch (Not shown)'' <br /> |1'<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Consult factory''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Lift Cylinder Guards&lt;/big&gt;''''' ====<br /> [[File:BE-TS Lift Cylinder Guards.png|alt=BE-TS Lift Cylinder Guards|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;2&quot; |1<br /> |43815016<br /> |GUARD-CLEVIS<br /> |<br /> |Operator right / Far left<br /> |2<br /> |-<br /> |43815017<br /> |GUARD-CLEVIS<br /> |<br /> |Operator left / Far right<br /> |2<br /> |-<br /> |2<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Labels &amp; Placards&lt;/big&gt;&lt;/u&gt;''' ===<br /> [[File:BE-TS Labels &amp; Placards Chassis.png|alt=BE-TS Labels &amp; Placards Chassis|frameless|546x546px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |00196616<br /> |LABEL-&quot;NO RIDERS ALLOWED&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |00196210<br /> |LABEL-WARNING-&quot;OPERATION BY AUTHORIZED PERSONNEL ONLY&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43696001<br /> |PLACARD-OFF / ON<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43096018<br /> |PLACARD-RACK LEVEL ASSIST<br /> |<br /> |''† If equipped''<br /> |1<br /> |-<br /> |5<br /> |43096015<br /> |PLACARD-PLATFORM RAISE / LOWER<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43096010<br /> |PLACARD-HORN<br /> |<br /> |''† If equipped''<br /> |1<br /> |-<br /> |7<br /> |43096016<br /> |PLACARD-DRIVE / ARM ROTATION<br /> |<br /> |<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |8<br /> |43096012<br /> |PLACARD-VACUUM OFF / ON<br /> |<br /> |''Vacuum units only''<br /> |1<br /> |-<br /> |43096011<br /> |PLACARD-MAGNET OFF / ON<br /> |<br /> |''Magnet units only (Not shown)''<br /> |1<br /> |-<br /> |9<br /> |43096017<br /> |PLACARD-POWERED ROLLER CUTOUT OVERRIDE<br /> |<br /> |''† If equipped''<br /> |1<br /> |-<br /> |10<br /> |43096013<br /> |PLACARD-POWERED ROLLERS / ARM TRAVERSE<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |00196633<br /> |LABEL-NOTICE-&quot;IN LINE VACUUM FILTER...&quot;<br /> |<br /> |''(1) per side (Vacuum units only)''<br /> |2<br /> |-<br /> |12<br /> |SM-1197<br /> |LABEL-ARM POSITION ARROW<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |00196609<br /> |LABEL-NOTICE-&quot;ARM MUST BE POSITIONED BETWEEN ARROWS...&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |00196602<br /> |LABEL-NOTICE-&quot;LUBRICATION POINTS ON UNDERSIDE&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |00196218<br /> |LABEL-WARNING-&quot;ELECTRICAL VOLTAGE HAZARD&quot;<br /> |<br /> |''Magnet units only''<br /> |1<br /> |-<br /> |16<br /> |00196238<br /> |LABEL-WARNING-&quot;STRONG MAGNETIC<br /> <br /> FIELD/DO NOT USE WITH PACEMAKER&quot;<br /> |<br /> |''†† Magnet units only''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Rack Level Assist (LAI), Horn and Powered Roller Cutout (PRC) are optional features. Not all units are equipped with these options.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Pacemaker Warning Label takes the place of the discontinued, Triangular Magnetic Field Label.''<br /> |}<br /> [[File:BE-TS Labels &amp; Placards Frame.png|alt=BE-TS Labels &amp; Placards Frame|frameless|549x549px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |00196004<br /> |LABEL-CAUTION-&quot;WATCH FOR BATTERY AND CHARGER CABLES IN TRAVEL PATH&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |00196216<br /> |LABEL-WARNING-&quot;CHAIN ENTANGLEMENT<br /> <br /> HAZARD&quot;<br /> |<br /> |''(1) per Clevis Guard'' <br /> |4<br /> |-<br /> |3<br /> |00196622<br /> |LABEL-LIFT POINT<br /> |<br /> |''(2) each end''<br /> |4<br /> |-<br /> |4<br /> |00196700<br /> |DECAL-BHS-24&quot; X 7.875&quot;<br /> |<br /> |''Far end (Not shown)''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |5<br /> |00196630<br /> |LABEL-NOTICE-HYD. OIL SPEC. (AW 68)<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |00196645<br /> |LABEL-NOTICE-HYD. OIL SPEC. (AW 32)<br /> |<br /> |''† See notes'' <br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |† Most units shipped prior to December 2014 require AW 68 Hydraulic Oil. Some units shipped prior to December 2014 shipped with AW 32 for low temperature applications.<br /> |}<br /> <br /> == &lt;big&gt;Extractor Arm&lt;/big&gt; ==<br /> {| class=&quot;wikitable&quot;<br /> !SYMBOL<br /> !DESCRIPTION / NOTICE<br /> !ACTUATOR DIAGRAM<br /> |-<br /> |[[File:IOP-400 BE-SL&amp;DS (10-23) Rotary Actuator Symbol.png|alt=Rotary Actuator Symbol|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Rotary_Actuator_Symbol.png]]<br /> |<br /> ==='''&lt;u&gt;&lt;big&gt;Rotary Actuator Symbol&lt;/big&gt;&lt;/u&gt;'''===<br /> Battery Extractors shipped prior to May 2020 are equipped with Rotary Actuator Extractor Arms. Parts Diagrams Specific to the Rotary Actuator design are indicated with the Rotary Actuator symbol.<br /> |[[File:IOP-400 BE-SL&amp;DS (10-23) Rotary Actuator Extractor Arm.png|alt=BE-TS Rotary Actuator|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Rotary_Actuator_Extractor_Arm.png]]<br /> |-<br /> |[[File:IOP-400 BE-SL&amp;DS (10-23) Helical Actuator Symbol.png|alt=Helical Actuator Symbol|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Helical_Actuator_Symbol.png]]<br /> |<br /> ===&lt;big&gt;'''&lt;u&gt;Helical Actuator Symbol&lt;/u&gt;'''&lt;/big&gt;===<br /> Battery Extractors shipped from May 2020 to Present are equipped with Helical Actuator Extractor Arms. Parts Diagrams Specific to the Rotary Actuator design are indicated with the Helical Actuator Symbol.<br /> |[[File:IOP-400 BE-SL&amp;DS (10-23) Helical Actuator Extractor Arm.png|alt=BE-TS Helical Actuator|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Helical_Actuator_Extractor_Arm.png]]<br /> |}<br /> ===&lt;big&gt;&lt;u&gt;Vacuum Components &amp; Swing Arms&lt;/u&gt;&lt;/big&gt;===<br /> ====''&lt;big&gt;Vacuum Arms (Rotary Actuator)&lt;/big&gt;''====<br /> [[File:BE-TS Vacuum Arms (Rotary Actuator).png|alt=BE-TS Vacuum Arms (Rotary Actuator)|frameless|619x619px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;2&quot; |1<br /> |N/A<br /> |ARM-PUSH/PULL-30&quot;<br /> |<br /> |''&lt;sup&gt;†&lt;/sup&gt; Discontinued''<br /> |1<br /> |-<br /> |N/A<br /> |ARM-PUSH/PULL-36&quot;<br /> |<br /> |''&lt;sup&gt;†&lt;/sup&gt; Discontinued''<br /> |1<br /> |-<br /> |2<br /> |HW0509<br /> |BOLT-HHCS-1/2-13 X 4 1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |P0505<br /> |BUSHING-RED-#6 NPT X #4 FNPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |P0402<br /> |HOSE BARB-1/4 X #4 MNPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0428<br /> |STUD-VACUUM-3/8-16 X 5&quot;<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |9<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |HW-KIT-2<br /> |<br /> |40<br /> |-<br /> |10<br /> |HW1001<br /> |SPRING-3/8&quot;<br /> |HW-KIT-2<br /> |<br /> |24<br /> |-<br /> |11<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |12<br /> |HW0424<br /> |NUT-JAM-3/8-16<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |REF<br /> |43052006<br /> |ADJUSTABLE PUSH/PULL ARM<br /> |<br /> |''Includes Items 13 through 17''<br /> |1<br /> |-<br /> |13<br /> |43057034<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |43055008<br /> |VACUUM CUP MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''&lt;sup&gt;†&lt;/sup&gt; One-piece Arms no longer available. Must replace with Adjustable Arm.''<br /> |}<br /> <br /> ====&lt;big&gt;''Vacuum Cups''&lt;/big&gt;====<br /> [[File:BE-TS Vacuum Cups.png|alt=Vacuum Cups|frameless|563x563px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;4&quot; |A/R<br /> |00162004<br /> |VACUUM CUP-10&quot; 3-PC (STANDARD)<br /> |<br /> |''&lt;sup&gt;†&lt;/sup&gt; Includes Items 1 through 4''<br /> | rowspan=&quot;4&quot; |A/R<br /> |-<br /> |00162003<br /> |VACUUM CUP-12&quot; 3-PC (STANDARD)<br /> |<br /> |''&lt;sup&gt;†&lt;/sup&gt; Includes Items 4 through 7''<br /> |-<br /> |00162007<br /> |VACUUM CUP-10&quot; 3-PC, REINFORCED<br /> |<br /> |''Includes Items 1,3,4 &amp; 8''<br /> |-<br /> |00162005<br /> |VACUUM CUP-12&quot; 3-PC, REINFORCED<br /> |<br /> |''Includes Items 4,5,7 &amp; 9''<br /> |-<br /> |1<br /> |00164006<br /> |CASTING-10&quot; VACUUM CUP<br /> |<br /> | rowspan=&quot;3&quot; |''10&quot; cup only''<br /> |1<br /> |-<br /> |2<br /> |00164004<br /> |SEAL-RUBBER-10&quot;<br /> |<br /> |1<br /> |-<br /> |3<br /> |00165002<br /> |PLATE-FRONT-10&quot;<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0311<br /> |BOLT-FHSCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |00166001<br /> |CASTING-12&quot; VACUUM CUP<br /> |<br /> | rowspan=&quot;3&quot; |''12&quot; cup only''<br /> |1<br /> |-<br /> |6<br /> |00164001<br /> |SEAL-RUBBER-12&quot;<br /> |<br /> |1<br /> |-<br /> |7<br /> |00165001<br /> |PLATE-FRONT-12&quot;<br /> |<br /> |1<br /> |-<br /> |8<br /> |00164007<br /> |SEAL-RUBBER-10&quot;-REINFORCED<br /> |<br /> |<br /> |A/R<br /> |-<br /> |9<br /> |00167003<br /> |SEAL-RUBBER-12&quot;-REINFORCED<br /> |<br /> |<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''&lt;sup&gt;†&lt;/sup&gt; 10&quot; and 12&quot; 1-Piece Cups no longer available. Must replace with 3-Piece Cup. Verify required cup size prior to ordering.''<br /> |}<br /> <br /> ====&lt;big&gt;''Swing Arms (Rotary Actuator)''&lt;/big&gt;====<br /> [[File:BE-TS Swing Arms (Rotary Actuator).png|alt=BE-TS Swing Arms (Rotary Actuator)|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> |ITEM<br /> |BHS PART NUMBER<br /> |DESCRIPTION<br /> |REF. KIT NO.<br /> |NOTES<br /> |NO. REQ<br /> |-<br /> | rowspan=&quot;3&quot; |1<br /> |45055001<br /> |TIE PLATE-SWING ARM<br /> |<br /> |BE-24-2-TS<br /> |1<br /> |-<br /> |45255001<br /> |TIE PLATE-SWING ARM<br /> |<br /> |BE-36-2-TS (NOT SHOWN)<br /> |1<br /> |-<br /> |45355001<br /> |TIE PLATE-SWING ARM<br /> |<br /> |BE-42-2-TS (NOT SHOWN)<br /> |1<br /> |-<br /> |2<br /> |43055004<br /> |SWING ARM-RHS<br /> |†<br /> |NOT SOLD INDIVIDUALLY<br /> |1<br /> |-<br /> |3<br /> |43055002<br /> |SWING ARM-LHS<br /> |†<br /> |NOT SOLD INDIVIDUALLY<br /> |1<br /> |-<br /> |4<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0113<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0010<br /> |NUT-JAM-5/8-11<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |PT0413<br /> |COLLAR-SHAFT-3&quot;<br /> |80252001<br /> |<br /> |2<br /> |-<br /> |8<br /> |43027001<br /> |SHAFT-ROTARY ACTUATOR<br /> |80252001<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW1013<br /> |KEY-3/8&quot; X 12&quot;<br /> |80252001<br /> |<br /> |1<br /> |-<br /> |10<br /> |PT0419<br /> |BEARING-SAE 841-2&quot; I.D., 3&quot; OD, 1/8&quot; THICK<br /> |80252001<br /> |<br /> |3<br /> |-<br /> |11<br /> |43052005<br /> |CAP-BEARING<br /> |<br /> |INCLUDES BEARING<br /> |2<br /> |-<br /> |12<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |13<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |14<br /> |43057014<br /> |STANDOFF-WIRE<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |HW0312<br /> |SCREW-SHSS-1/4-20 X 1&quot;-CUP POINT<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |43057003<br /> |CUSHION-SWING ARM<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |43055001<br /> |STOP-SWING ARM<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |20<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |21<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |H1565<br /> |ADAPTER-45 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |23<br /> |H1600<br /> |ADAPTER-90 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |&lt;sup&gt;†&lt;/sup&gt; ''Included in multiple kits.''<br /> |-<br /> | colspan=&quot;6&quot; |See ''Single Compartment Swing Arm Stop for the the Single Compartment Swing Arm Stop.''<br /> |}<br /> <br /> === '''''Vacuum Swing Arm Stop (Rotary Actuator)''''' ===<br /> [[File:BE-TS Single Compartment Swing Arms (Rotary Actuator).png|alt=BE-TS Single Compartment Swing Arms (Rotary Actuator)|frameless|575x575px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |44555001<br /> |STOP-SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43057003<br /> |CUSHION-SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43057008<br /> |SPACER-SWING ARM STOP<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |}<br /> ====''&lt;big&gt;Vacuum Pump (Rotary Actuator)&lt;/big&gt;''====<br /> [[File:BE-TS Vacuum Pumps (Rotary Actuator).png|alt=BE-TS Vacuum Pumps (Rotary Actuator)|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |P0005<br /> |PUMP-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |P0208<br /> |FILTER-HI FLOW<br /> |<br /> |<br /> |3<br /> |-<br /> |3<br /> |P0503<br /> |NIPPLE-#4 NPT-BRASS<br /> |<br /> |<br /> |3<br /> |-<br /> |4<br /> |P0502<br /> |TEE-#4 FNPT-BRASS<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |P0506<br /> |ELBOW-STR-90 DEG-#4 NPT-BRASS<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |P0402<br /> |HOSE BARB-1/4 X #4 NPTM-BRASS<br /> |<br /> |<br /> |6<br /> |-<br /> |7<br /> |P0207<br /> |VALVE-VACUUM RELEASE<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |P0302<br /> |HOSE-VACUUM-1/4&quot; I.D.<br /> |<br /> |''Two 6&quot; pieces''<br /> |1'<br /> |-<br /> |9<br /> |P0302<br /> |HOSE-VACUUM-1/4&quot; I.D.<br /> |<br /> |''Short Arm side''<br /> |1'<br /> |-<br /> |10<br /> |P0302<br /> |HOSE-VACUUM-1/4&quot; I.D.<br /> |<br /> |''Long Arm side''<br /> |2'<br /> |-<br /> |11<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |HW0212<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |E0624<br /> |CONNECTOR-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |15a<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |''Not shown''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |16<br /> |E0501<br /> |CORD-14-4 SW/SOW<br /> |<br /> |''Withtout Ground Connection in Arm''<br /> | rowspan=&quot;2&quot; |15'<br /> |-<br /> |E0514<br /> |CORD-16-5 SW/SOW<br /> |<br /> |<br /> |-<br /> |17<br /> |43057014<br /> |STANDOFF-CABLE<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |HW0206<br /> |SCREW-RHMS-#10-32 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |19<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |20<br /> |43057021<br /> |PLATE-STIFFENER<br /> |†<br /> |<br /> |2<br /> |-<br /> |21<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |†<br /> |<br /> |12<br /> |-<br /> |22<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |†<br /> |<br /> |12<br /> |-<br /> |23<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |†<br /> |<br /> |12<br /> |-<br /> |24<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |†<br /> |''Not shown''<br /> |24<br /> |-<br /> |25<br /> |P0111<br /> |FILTER-VACUUM-INLINE<br /> |<br /> |''Not shown''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |&lt;sup&gt;†&lt;/sup&gt; ''Included in multiple kits.''<br /> |}<br /> ===&lt;u&gt;&lt;big&gt;Rotary Actuator&lt;/big&gt;&lt;/u&gt;===<br /> [[File:BE-TS Rotary Actuator.png|alt=BE-TS Rotary Actuator|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43046001<br /> |ROTARY ACTUATOR<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |80000002<br /> |ROTARY ACTUATOR BASE ASSEMBLY<br /> |<br /> |''Without Actuator''<br /> |1<br /> |-<br /> |2A<br /> |N/A<br /> |VERTICAL CARRIER PLATE-OUTER<br /> |<br /> |''Included with 80000002''<br /> |2<br /> |-<br /> |2B<br /> |N/A<br /> |VERTICAL CARRIER PLATE-INNER<br /> |<br /> |''Included with 80000002''<br /> |1<br /> |-<br /> |2C<br /> |N/A<br /> |CARRIER BASE PLATE<br /> |<br /> |''Included with 80000002''<br /> |1<br /> |-<br /> |3<br /> |HW1070<br /> |PIN-PULL DOWEL-5/8&quot; X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0508<br /> |BOLT-SHCS-1/2-13 X 3/4&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW1045<br /> |PIN-PULL DOWEL-3/8&quot; X 1 1/2&quot;<br /> |<br /> |''Included with 80000002''<br /> |6<br /> |-<br /> |6<br /> |HW0412<br /> |BOLT-SHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |''Included with 80000002''<br /> |12<br /> |-<br /> |7<br /> |H0010<br /> |FITTING-BULKHEAD-3/4-16 X #4 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 NPTM<br /> |<br /> |<br /> |2<br /> |}<br /> ===&lt;u&gt;&lt;big&gt;Carrier Shafts &amp; Bearings ''(Rotary Actuator)''&lt;/big&gt;&lt;/u&gt;===<br /> [[File:BE-TS Rotary Actuator Carrier Shafts.png|alt=BE-TS Carrier Shafts (Rotary Actuator)|frameless|560x560px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43057045<br /> |CARRIER SHAFT-EXTRACTOR ARM<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |2<br /> |43054007<br /> |BEARING-EXTRACTOR ARM CARRIER<br /> |80252002<br /> |''†† See notes''<br /> |4<br /> |-<br /> |3<br /> |HW0412<br /> |BOLT-SHCS-3/8-16 X 1 1/4&quot;<br /> |80252002<br /> |<br /> |16<br /> |-<br /> |4<br /> |PT0413<br /> |COLLAR-SHAFT-3&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |PT0624<br /> |FITTING-ZERK<br /> |80252002<br /> |''Not shown''<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Vacuum_Extended_Reach_(Rotary_Actuator) Vacuum Extended Reach (Rotary Actuator)] section for Extended Reach equipped units.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Carrier_Shafts_&amp;_Bearings Carrier Shafts &amp; Bearings (Helical Actuator)] section for Helical Actuator equipped units.''<br /> |}<br /> <br /> ===&lt;u&gt;&lt;big&gt;Drive Screw Components ''(Rotary Actuator)''&lt;/big&gt;&lt;/u&gt;===<br /> ====''&lt;big&gt;Drive Nut Assembly (Rotary Actuator)&lt;/big&gt;''====<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Drive Nut Assembly Rotary Actuator.png|alt=BE-SL&amp;DS Drive Nut Assembly Rotary Actuator|frameless|537x537px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Drive_Nut_Assembly_Rotary_Actuator.png]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43054006<br /> |DRIVE NUT ASSEMBLY<br /> |80252003<br /> |&lt;sup&gt;''†''&lt;/sup&gt; ''See notes''<br /> |1<br /> |-<br /> |2<br /> |HW0426<br /> |BOLT-SHCS-3/8-16 X 5 1/2&quot;<br /> |80252003<br /> |&lt;sup&gt;''††''&lt;/sup&gt; ''See notes''<br /> |4<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |80252003<br /> |&lt;sup&gt;''††''&lt;/sup&gt; ''See notes''<br /> |4<br /> |-<br /> |4<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |80252003<br /> |&lt;sup&gt;''††''&lt;/sup&gt; ''See notes''<br /> |4<br /> |-<br /> |5<br /> |PT0624<br /> |FITTING-ZERK<br /> |80252003<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''&lt;sup&gt;†&lt;/sup&gt; See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Drive_Nut_Assembly_(Helical_Actuator) Drive Nut Assembly (Helical Actuator)] section for Helical Actuator equipped units.''<br /> |-<br /> | colspan=&quot;6&quot; |''&lt;sup&gt;††&lt;/sup&gt; It is recommended to replace mounting hardware when replacing Drive Nut Assembly.''<br /> |}<br /> ====''&lt;big&gt;Drive Screw&lt;/big&gt;''====<br /> =====''[Current] Drive Screw Assembly (Frame #'s 374 to Present)''=====<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Drive Screw Rotary Current.png|alt=Current BE-SL &amp; BE-DS Drive Screw (Rotary Actuator)|frameless|531x531px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Drive_Screw_Rotary_Current.png]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43024001<br /> |SCREW-LINEAR DRIVE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |PT0119<br /> |SPROCKET-50B15 X 1 3/16&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43097004<br /> |KEY-1/4 X 7/8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |00158001-15<br /> |CHAIN-ROLLER-#50<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |PT0102<br /> |LINK-CONNECTING-#50<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |PT0406<br /> |FLANGE BEARING-4 BOLT-1 3/16&quot;<br /> |<br /> |''Alloy casting''<br /> |2<br /> |-<br /> |7<br /> |HW0503<br /> |BOLT-HHCS-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |PT0107<br /> |SPROCKET-50B15 X 1&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HC0121<br /> |MOTOR-HYDRAULIC-100CC<br /> |<br /> |''SAE 2-Bolt mount''<br /> |1<br /> |-<br /> |11<br /> |H1605<br /> |ADAPTER-90 DEG-#6 JICM X #10 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW1071<br /> |KEY-WOODRUFF-#808 STD<br /> |<br /> |''Supplied with Item 10''<br /> |A/R<br /> |-<br /> |13<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |14<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |15<br /> |43017007<br /> |PLATE-MOUNTING-SCREW DRIVE MOTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |43057019<br /> |PLATE-COVER<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0415<br /> |BOLT-SHCS-3/8-16 X 3/4&quot;<br /> |<br /> |<br /> |8<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> ! colspan=&quot;6&quot; |ITEMS BELOW ARE REQUIRED FOR REPLACING THE LINEAR DRIVE<br /> <br /> SCREW ON UNITS WITH FRAME #'S OF 373 AND EARLIER<br /> |-<br /> ! colspan=&quot;6&quot; |LINEAR DRIVE SCREW UPDATE KIT<br /> |-<br /> |REF<br /> |80252011<br /> |UPGRADE KIT<br /> |<br /> |<br /> |1<br /> |-<br /> |1<br /> |43024001<br /> |SCREW-LINEAR DRIVE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |PT0119<br /> |SPROCKET-50B15 X 1 3/16&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43097004<br /> |KEY-1/4&quot; X 7/8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |PT0406<br /> |FLANGE BEARING-4 BOLT-1 3/16&quot;<br /> |<br /> |''Alloy casting''<br /> |2<br /> |-<br /> |7<br /> |HW0503<br /> |BOLT-HHCS-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |16<br /> |43057019<br /> |PLATE-COVER<br /> |<br /> |<br /> |2<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |43057022<br /> |SHIM-18GA<br /> |<br /> |''May not be required'' - ''(Not shown)''<br /> |2<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |43057018<br /> |TEMPLATE-BEARING MOUNT PATTERN<br /> |<br /> |''(Not shown)''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |43057020<br /> |SPACER PLATE<br /> |<br /> |''(Not shown)''<br /> |2<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |80000015<br /> |INSTRUCTION DETAIL<br /> |<br /> |''(Not shown)''<br /> |REF<br /> |}<br /> <br /> =====''[Discontinued] Drive Screw Assembly (Frame #'s 373 and Earlier)''=====<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Drive Screw (Rotary Actuator) Discontinued.png|alt=Discontinued BE-SL &amp; BE-DS Drive Screw (Rotary Actuator)|frameless|532x532px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Drive_Screw_(Rotary_Actuator)_Discontinued.png]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |SCREW-LINEAR DRIVE (DISCONTINUED)<br /> |<br /> |''See 80252011 Upgrade Kit''<br /> |1<br /> |-<br /> |2<br /> |PT0118<br /> |SPROCKET-50B12 X 1 3/16&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43097004<br /> |KEY-1/4&quot; X 7/8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |00158001-15<br /> |CHAIN-ROLLER-#50<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |PT0102<br /> |LINK-CONNECTING-#50<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43057016<br /> |BLOCK-BEARING RETAINER<br /> |<br /> |<br /> |2<br /> |-<br /> |6a<br /> |PT0414<br /> |RACE-TAPERED ROLLER BEARING<br /> |<br /> |''Included with 43057016''<br /> |2<br /> |-<br /> |7<br /> |PT0623<br /> |SEAL-GREASE<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0416<br /> |BOLT-SHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |PT0415<br /> |BEARING-TAPERED ROLLER<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW1050<br /> |NUT-LOCK<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |43057017<br /> |PLATE-COVER<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0415<br /> |BOLT-SHCS-3/8-16 X 3/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |13<br /> |PT0624<br /> |FITTING-ZERK<br /> |<br /> |<br /> |2<br /> |}<br /> ===&lt;big&gt;&lt;u&gt;Hose Carrier Plate&lt;/u&gt;&lt;/big&gt;===<br /> [[File:BE-TS Hose Carrier Plate.png|alt=BE-TS Hose Carrier Plate|frameless|554x554px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43915018<br /> |PLATE-HOSE CARRIER<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |PT0618<br /> |BRACKET-FIXED END<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |PT0617<br /> |HOSE CARRIER<br /> |<br /> |''20 links required''<br /> |3 FT<br /> |-<br /> |5<br /> |PT0619<br /> |BRACKET-MOVING END<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |9<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |10<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HC0262<br /> |VALVE-CROSS PORT RELIEF<br /> |<br /> |''Includes cartridges''<br /> |1<br /> |-<br /> |12a<br /> |43846002<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''†† For Item 12 (Not shown)''<br /> |2<br /> |-<br /> |13<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |H1560<br /> |ADAPTER-45 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |E1329<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |''PVC - Includes cover''<br /> |1<br /> |-<br /> |19<br /> |HW0212<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |20<br /> |HW0102<br /> |WASHER-FLAT-#10-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |21<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |22<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |23<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |''For Items 21 &amp; 22 (Not shown)''<br /> |3<br /> |-<br /> |24<br /> |HW1076<br /> |BOLT-FHSCS-3/8-16 X 1&quot;<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Units built prior to February 2014 without extended reach option use (4) HW0403 mounting bolts.''<br /> <br /> ''†† Cartridges are for replacement only.''<br /> |}<br /> <br /> === &lt;big&gt;'''&lt;u&gt;Magnet Components ''(Rotary Actuator)''&lt;/u&gt;'''&lt;/big&gt; ===<br /> <br /> ==== '''''&lt;big&gt;[Discontinued] Magnet Arm Configuration&lt;/big&gt;''''' ====<br /> [[File:BE-TS (Discontinued) Magnet Arm Configuration.png|alt=BE-TS (Discontinued) Magnet Arm Configuration|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41257014<br /> |TIE PLATE-SWING ARM<br /> |<br /> |''All units''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |41655008<br /> |EXTENSION-ARM<br /> |<br /> |''BE-36 only (Not shown)''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |43455001<br /> |EXTENSION-ARM<br /> |<br /> |''BE-42 only (Not shown)''<br /> |1<br /> |-<br /> |2<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0113<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0010<br /> |NUT-JAM-5/8-11<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |41655001<br /> |CARRIER TUBE-MAGNET SWING SHAFT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |7<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |9<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |6<br /> |-<br /> |10<br /> |41657006<br /> |SHAFT-MAGNET SWING<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |41698001<br /> |KEY-3/8&quot; X 7/16&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |N/A<br /> |STOP-MAGNET SWING<br /> |<br /> |''† Dicontinued''<br /> |1<br /> |-<br /> |13<br /> |PT0430<br /> |FLANGE BEARING-4 BOLT-1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |HW0513<br /> |BOLT-HHCS-1/2-13 X 2 1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |15<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |16<br /> |-<br /> |16<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |17<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |-<br /> |18<br /> |41655002<br /> |PLATE-MAGNET MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |41257015<br /> |BLOCK-TIGHTENER<br /> |<br /> |''2-piece item''<br /> |1<br /> |-<br /> |20<br /> |41257016<br /> |BLOCK-FIXED<br /> |<br /> |''2-piece item''<br /> |1<br /> |-<br /> |21<br /> |HW0423<br /> |BOLT-SHCS-3/8-16 X 3 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0806<br /> |SET SCREW-3/8-16 X 2&quot;<br /> |<br /> |''Replaces Swivel Head''<br /> |4<br /> |-<br /> |24<br /> |HW0424<br /> |NUT-JAM-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |25<br /> |41657017<br /> |INSULATOR-MAGNET MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |26<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |27<br /> |41657008<br /> |PAD-MAGNET SLIDE<br /> |<br /> |<br /> |2<br /> |-<br /> |28<br /> |HW0314<br /> |BOLT-FHSCS-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Refer to [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#&amp;#x5B;Current&amp;#x5D;_Magnet_Arm_Configuration_(Rotary_Actuator) &lt;nowiki&gt;[Current] Magnet Arm Configuration (Rotary Actuator)&lt;/nowiki&gt;] section for replacement / upgrade parts.''<br /> |}<br /> <br /> ==== '''&lt;big&gt;''Magnet Pivot Stop (Rotary Actuator)''&lt;/big&gt;''' ====<br /> [[File:BE-TS Magnet Pivot Stop.png|alt=BE-TS Magnet Pivot Stop|frameless|547x547px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |MAGNET PUSH/PULL ARM<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |43055010<br /> |MAGNET MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |PT0470<br /> |BEARING-MAGNET PIVOT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0525<br /> |BOLT-CARRIAGE-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |5<br /> |HW0524<br /> |BOLT-CARRIAGE-1/2-13 X 2&quot;<br /> |<br /> |''†† Stop Plate location''<br /> |4<br /> |-<br /> |6<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |7<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |16<br /> |-<br /> |8<br /> |43058009<br /> |PLATE-ROTATION STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |43058003<br /> |SLEEVE-STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43058010<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |PL0501<br /> |GROMMET-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |43057037<br /> |INSULATOR-BOTTOM<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |16<br /> |41657008<br /> |SLIDE-MAGNET<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0314<br /> |BOLT-FHSCS-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |44558001<br /> |PLATE-ROTATION STOP<br /> |<br /> |''†† Single compartment units only''<br /> |2<br /> |-<br /> |REF<br /> |43052014<br /> |ADJUSTABLE PUSH-PULL ARM<br /> |<br /> |''Includes Items 19-23''<br /> |A/R<br /> |-<br /> |19<br /> |43055018<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |20<br /> |43055019<br /> |MAGNET MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |21<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |22<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† 1-Piece Arm no longer available. Must be replaced with Adjustable Arm.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Single compartment Stop Plates require (1) additional 2&quot; long Carriage Bolt each''<br /> |}<br /> <br /> ==== &lt;big&gt;''[Current] Magnet Arm Configuration (Rotary Actuator)''&lt;/big&gt; ====<br /> [[File:BE-TS (Current) Magnet Arm Configuration.png|alt=BE-TS (Current) Magnet Arm Configuration|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |80252012<br /> |MAGNET SWING STOP KIT<br /> |<br /> |''Includes Items 1 through 6''<br /> |A/R<br /> |-<br /> |1<br /> |43057029<br /> |PLATE-STOP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43058003<br /> |SLEEVE-STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |43057030<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |PL0501<br /> |GROMMET-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0509<br /> |BOLT-HHCS-1/2-13 X 4 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |44557003<br /> |PLATE-STOP<br /> |<br /> |''† Single compartment units only''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† For units equipped with Pivot Shaft. See [Current] Magnet Arm Configuration (Rotary Actuator) for units with Independent Magnet Pivot Bearings.'' <br /> |}<br /> <br /> ==== &lt;big&gt;''Magnet Mounting Hardware (Rotary Actuator)''&lt;/big&gt; ====<br /> [[File:BE-TS Magnet Mounting Hardware (Rotary Actuator).png|alt=BE-TS Magnet Mounting Hardware (Rotary Actuator)|frameless|554x554px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43032009<br /> |MAGNET ASSEMBLY<br /> |<br /> |''Includes Items 1 through 12''<br /> |A/R<br /> |-<br /> |1<br /> |N/A<br /> |ELECTROMAGNET-95VDC<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |E0314<br /> |SENSOR-PROXIMITY-30MM<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |N/A<br /> |GASKET-REAR<br /> |<br /> |''Discontinued - Not used''<br /> |2<br /> |-<br /> |4<br /> |41657002<br /> |COVER-PROXIMITY SENSOR HOUSING<br /> |<br /> |''Rear''<br /> |2<br /> |-<br /> |5<br /> |HW1065<br /> |SCREW-SHCS-#6-32 X 3/8&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |6<br /> |HW1066<br /> |WASHER-LOCK-#6<br /> |<br /> |<br /> |8<br /> |-<br /> |7<br /> |E0376<br /> |INDICATOR LIGHT<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |8<br /> |E0335<br /> |RECEPTACLE-5 PIN MALE<br /> |<br /> |''With 12&quot; lead''<br /> |2<br /> |-<br /> |9<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |N/A<br /> |GASKET-FRONT<br /> |<br /> |''Discontinued - Not used''<br /> |2<br /> |-<br /> |11<br /> |41657003<br /> |COVER-PROXIMITY SENSOR HOUSING<br /> |80252015<br /> |''Front''<br /> |2<br /> |-<br /> |12<br /> |HW0138<br /> |SCREW-FHSCS-#8-32 X 3/8&quot;<br /> |80252015<br /> |<br /> |8<br /> |-<br /> |13<br /> |HW0433<br /> |STUD-1/2-13 X 5&quot;<br /> |80252006<br /> | rowspan=&quot;5&quot; |''For units with Magnet Pivot Shaft only.'' <br /> <br /> ''See [Discontinued] Magnet Arm Configuration for units built prior to 11/01/14''<br /> |8<br /> |-<br /> |14<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |80252006<br /> |8<br /> |-<br /> |15<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |80252006<br /> |40<br /> |-<br /> |16<br /> |HW1002<br /> |SPRING-1/2&quot;<br /> |80252006<br /> |24<br /> |-<br /> |17<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |80252006<br /> |8<br /> |-<br /> |18<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |80252014<br /> | rowspan=&quot;4&quot; |''For units with independent Pivot Bearings only.'' <br /> <br /> ''See [Current] Magnet Arm Configuration for units built 11/01/14 to present)''<br /> |4<br /> |-<br /> |19<br /> |HW1002<br /> |SPRING-1/2&quot;<br /> |80252014<br /> |4<br /> |-<br /> |20<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |80252014<br /> |8<br /> |-<br /> |21<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |80252014<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Extractors built or replacement magnets shipped prior to October 2021 used multi-piece indicator lights with replaceable bulb and lens and are no longer available. Current indicator light is a 1-piece LED assembly. Replacement of any multi-piece component requires replacing entire assembly with current, 1-piece indicator light.''<br /> |}<br /> <br /> === '''''Magnet Cords (Rotary Actuator)''''' ===<br /> [[File:BE-TS Magnet Cords.png|alt=BE-TS Magnet Cords|frameless|555x555px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1105<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |''Weather proof box''<br /> |1<br /> |-<br /> |2<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |E1106<br /> |COVER-JUNCTION BOX<br /> |<br /> |''Weather proof with gasket'' <br /> |1<br /> |-<br /> |4<br /> |E0333<br /> |RECEPTACLE-9 PIN MALE<br /> |<br /> |''With 12&quot; lead''<br /> |1<br /> |-<br /> |5<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |6<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |7<br /> |E0334<br /> |CORD-5 PIN FEMALE<br /> |<br /> |''With 36&quot; lead''<br /> |2<br /> |-<br /> |8<br /> |E0332<br /> |CORD-9 PIN FEMALE-90 DEG<br /> |<br /> |''With 36&quot; lead''<br /> |1<br /> |-<br /> |9<br /> |PL0501<br /> |GROMMET-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |41657013-2<br /> |PLATE-PANEL MOUNTING<br /> |<br /> |''With single cable hole''<br /> |1<br /> |-<br /> |11<br /> |E0334-6<br /> |CORD-5 PIN FEMALE<br /> |<br /> |''With 72&quot; lead''<br /> |2<br /> |-<br /> |12<br /> |43057038-2<br /> |PLATE-PANEL MOUNTING<br /> |<br /> |''With dual cable holes''<br /> |1<br /> |}<br /> '''''&lt;big&gt;Magnet Panel Mounting (Rotary Actuator)&lt;/big&gt;'''''<br /> <br /> [[File:BE-TS Panel Mounting (Rotary Actuator).png|alt=BE-TS Panel Mounting (Rotary Actuator)|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43057021<br /> |PLATE-STIFFENER<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |''Not shown''<br /> |24<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |5<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |12<br /> |-<br /> |6<br /> |41637001<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0325<br /> |BOLT-5/16-18 X 1 3/4&quot;-PAN HEAD<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |N/A<br /> |INSULATOR-THREADED FEMALE<br /> |<br /> |''Discontinued''<br /> |4<br /> |-<br /> |9<br /> |HW0106<br /> |WASHER-FLAT-5/16&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0326<br /> |NUT-NILN-5/16-18<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |E1016<br /> |FUSE HOLDER<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |E0325<br /> |FUSE-7AMP-250VAC<br /> |<br /> |''FLM-7 or FNM-7''<br /> |1<br /> |-<br /> |16<br /> |PL0307<br /> |INSULATOR-MALE STUD<br /> |<br /> |<br /> |4<br /> |}<br /> '''''&lt;big&gt;Magnet Extractor Electrical Panel (Rotary Actuator)&lt;/big&gt;'''''<br /> <br /> [[File:BE-TS Magnet Extractor Electrical Panel (Rotary Actuator).png|alt=BE-TS Magnet Extractor Electrical Panel (Rotary Actuator)|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41637001<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41637002<br /> |WIRE WAY<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |41637003<br /> |WIRE WAY<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |41637004<br /> |TRACK-TERMINAL BLOCK MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |41637005<br /> |TRACK-TERMINAL BLOCK MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |7<br /> |HW0132<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |<br /> |10<br /> |-<br /> |8<br /> |HW0133<br /> |NUT-NILN-#8-32<br /> |<br /> |''Not shown''<br /> |16<br /> |-<br /> |9<br /> |E1020<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |12<br /> |-<br /> |10<br /> |E1040<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |E1330<br /> |END ANCHOR<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |E1009<br /> |RECTIFIER-FULL WAVE BRIDGE<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |HW0135<br /> |SCREW-RHMS-#8-32 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |E1313<br /> |SOCKET-RELAY-8 PIN<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0139<br /> |SCREW-RHMS-#8-32 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |E0331<br /> |RELAY-DPDT-110VAC<br /> |<br /> |''with Indicator Light''<br /> |2<br /> |}<br /> <br /> === &lt;big&gt;'''&lt;u&gt;Swing Arm Stop (Rotary Actuator)&lt;/u&gt;'''&lt;/big&gt; ===<br /> [[File:BE-TS Swing Arm Stop (Rotary Actuator).png|alt=BE-TS Swing Arm Stop (Rotary Actuator)|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055007<br /> |MOUNT-STOP-SWING ARM<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |2<br /> |43057024<br /> |STOP-SWING ARM<br /> |<br /> |''BE-24''<br /> |4<br /> |-<br /> |43057023<br /> |STOP-SWING ARM<br /> |<br /> |''BE-36 &amp; BE-42''<br /> |4<br /> |-<br /> |3<br /> |HW0304<br /> |BOLT-HHCS-1/4-20 X 1 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Vacuum_Swing_Arm_Stop_(Rotary_Actuator) Vacuum Swing Arm Stop (Rotary Actuator)] section for single compartment stop mount and stop.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Extended Reach (Rotary Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Vacuum Extended Reach (Rotary Actuator).png|alt=BE-TS Vacuum Extended Reach (Rotary Actuator)|frameless|536x536px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41257014<br /> |TIE PLATE-SWING ARM<br /> |<br /> |''All units''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |41655008<br /> |EXTENSION-ARM<br /> |<br /> |''BE-36 only (Not shown)''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |43455001<br /> |EXTENSION-ARM<br /> |<br /> |''BE-42 only (Not shown)''<br /> |1<br /> |-<br /> |2<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |P0301-1<br /> |HOSE-COIL-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |41257035<br /> |STANDOFF<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW1072<br /> |RESTRAINT-HOSE<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0318<br /> |BOLT-SHCS-1/4-20 X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |HW0312<br /> |SCREW-SHSS-1/4-20 X 1&quot;-CUP POINT<br /> |<br /> |<br /> |1<br /> |}<br /> [[File:BE-TS Vacuum Extended Reach (Rotary Actuator) 2.png|alt=BE-TS Vacuum Extended Reach (Rotary Actuator)|frameless|547x547px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41255005<br /> |ARM-EXTENSION-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0416<br /> |CYLINDER-EXTENDED REACH-VACUUM<br /> |<br /> |''2 1/2&quot; X 12&quot; Cylinder''<br /> |1<br /> |-<br /> |3<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JICM X #6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |41257031<br /> |PIN-CLEVIS END<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |00197036<br /> |PIN-ROD END<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1058<br /> |PIN-HITCH<br /> |<br /> |<br /> |4<br /> |}<br /> [[File:BE-TS Vacuum Extended Reach (Rotary Actuator) 3.png|alt=BE-TS Vacuum Extended Reach (Rotary Actuator) 3|frameless|541x541px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41255004<br /> |HOUSING-EXTENDED REACH-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41257030<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |41258002<br /> |PLATE-BEARING<br /> |80258001<br /> |''Side''<br /> |2<br /> |-<br /> |8<br /> |41258005<br /> |PLATE-SHIM<br /> |80258001<br /> |''Side''<br /> |2<br /> |-<br /> |9<br /> |41258003<br /> |PLATE-BEARING<br /> |80258001<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |10<br /> |41258004<br /> |PLATE-SHIM<br /> |80258001<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |11<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |28<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |28<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Extended Reach (Rotary Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Extended Reach Rotary Actuator.png|alt=BE-TS Extended Reach Rotary Actuator|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43046001<br /> |ROTARY ACTUATOR<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |80000002<br /> |ROTARY ACTUATOR BASE ASSEMBLY<br /> |<br /> |''Without Actuator''<br /> |1<br /> |-<br /> |2A<br /> |N/A<br /> |VERTICAL CARRIER PLATE-OUTER<br /> |<br /> |''Included with 80000002''<br /> |2<br /> |-<br /> |2B<br /> |N/A<br /> |VERTICAL CARRIER PLATE-INNER<br /> |<br /> |''Included with 80000002''<br /> |1<br /> |-<br /> |2C<br /> |N/A<br /> |CARRIER BASE PLATE<br /> |<br /> |''Included with 80000002''<br /> |1<br /> |-<br /> |3<br /> |HW1070<br /> |PIN-PULL DOWEL-5/8&quot; X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0508<br /> |BOLT-SHCS-1/2-13 X 3/4&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW1045<br /> |PIN-PULL DOWEL-3/8&quot; X 1 1/2&quot;<br /> |<br /> |''Included with 80000002''<br /> |6<br /> |-<br /> |6<br /> |HW0412<br /> |BOLT-SHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |''Included with 80000002''<br /> |12<br /> |-<br /> |7<br /> |H0010<br /> |FITTING-BULKHEAD-3/4-16 X #4 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |4<br /> |}<br /> [[File:BE-TS Extended Reach Rotary Actuator 2.png|alt=BE-TS Extended Reach Rotary Actuator |frameless|535x535px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PT0634<br /> |BRACKET-MALE END<br /> |<br /> |''Sols as a set''<br /> |1<br /> |-<br /> |2<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |10<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |PT0627<br /> |HOSE CARRIER<br /> |<br /> |''14 links required''<br /> |39&quot;<br /> |-<br /> |7<br /> |PT0634<br /> |BRACKET-FEMALE END<br /> |<br /> |''Sols as a set''<br /> |1<br /> |-<br /> |8<br /> |HC0262<br /> |VALVE-CROSS PORT RELIEF<br /> |<br /> |<br /> |1<br /> |-<br /> |8a<br /> |43046003<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''† For Item 8 (Not shown)''<br /> |2<br /> |-<br /> |9<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |H1546<br /> |ADAPTER-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |H1617<br /> |ADAPTER-45 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HC0237<br /> |VALVE-SEQUENCING<br /> |<br /> |<br /> |1<br /> |-<br /> |12a<br /> |43046005<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''† For Item 12 (Not shown)''<br /> |A/R<br /> |-<br /> |13<br /> |HW0317<br /> |BOLT-HHCS-1/4-20 X 3 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |H1560<br /> |ADAPTER-45 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |H1600<br /> |ADAPTER-90 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Cartridges are for replacement only''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Extended Reach (Rotary Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Extended Reach (Rotary Actuator).png|alt=BE-TS Magnet Extended Reach (Rotary Actuator)|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055011<br /> |ARM-EXTENSION-MAGNET<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0415<br /> |CYLINDER-EXTENDED REACH-MAGNET<br /> |<br /> |''2 1/2&quot; X 8&quot; Cylinder''<br /> |1<br /> |-<br /> |3<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JICM X #6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CLEVIS END<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-ROD END<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-EXTERNAL-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW1043<br /> |CLAMP-CYLINDER<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |43057044-2<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |43058019<br /> |SUPPORT-CABLE-BAND CLAMP<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> [[File:BE-TS Magnet Extended Reach (Rotary Actuator) 2.png|alt=BE-TS Magnet Extended Reach (Rotary Actuator) |frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055012<br /> |HOUSING-EXTENDED REACH-MAGNET<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |43058013<br /> |PLATE-BEARING-SIDE<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |43058016<br /> |PLATE-SHIM-SIDE<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |43058014<br /> |PLATE-BEARING-UPPER/LOWER<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43058015<br /> |PLATE-SHIM-UPPER/LOWER<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |24<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |24<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Extended Reach End Plate&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Extended Reach End Plate.png|alt=BE-TS Extended Reach End Plate|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |CARRIER SHAFT-EXTRACTOR ARM<br /> |<br /> |''† 3-Hole version''<br /> |A/R<br /> |-<br /> |2<br /> |PT0413<br /> |COLLAR-SHAFT-3&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |50057009<br /> |PLATE-END-3 HOLE<br /> |<br /> |''Replacement part only''<br /> |4<br /> |-<br /> |4<br /> |50057010<br /> |SHIM-END PLATE<br /> |<br /> |''†† See notes''<br /> |A/R<br /> |-<br /> |5<br /> |HW1076<br /> |BOLT-FHSCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |6<br /> |43057045<br /> |CARRIER SHAFT-EXTRACTOR ARM<br /> |<br /> |''1-Hole version''<br /> |2<br /> |-<br /> |7<br /> |43017076<br /> |PLATE-END-1 HOLE<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† 3-Hole Carrier Shaft no longer available. Must replace 3-Hole shaft with current, 1-Hole version along with new ennd plates &amp; hardware.'' <br /> |-<br /> | colspan=&quot;6&quot; |''†† Shim quantity varies due to manufacturing tolerances.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Carrier Shafts &amp; Bearings&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Carrier Shafts &amp; Bearings (Helical Actuator).png|alt=BE-TS Carrier Shafts &amp; Bearings (Helical Actuator)|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43057045<br /> |CARRIER SHAFT-EXTRACTOR ARM<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |2<br /> |43054007<br /> |BEARING-EXTRACTOR ARM CARRIER<br /> |80252002<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0412<br /> |BOLT-SHCS-3/8-16 X 1 1/4&quot;<br /> |80252002<br /> |<br /> |16<br /> |-<br /> |4<br /> |PT0413<br /> |COLLAR-SHAFT-3&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |50057010<br /> |SHIM-END PLATE<br /> |<br /> |<br /> |A/R<br /> |-<br /> |6<br /> |43017076<br /> |PLATE-END-1 HOLE<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |PT0624<br /> |FITTING-ZERK<br /> |80252002<br /> |''Not shown''<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Extended_Reach_End_Plate Extended Reach End Plate] section for Extended Reach equipped units.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Drive Nut Assembly (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Drive Nut Assembly (Helical Actuator).png|alt=BE-TS Drive Nut Assembly (Helical Actuator)|frameless|600x600px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43054006<br /> |DRIVE NUT ASSEMBLY<br /> |80252003<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0426<br /> |BOLT-SHCS-3/8-16 X 5 1/2&quot;<br /> |80252003<br /> |''† See notes''<br /> |4<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |80252003<br /> |''† See notes''<br /> |4<br /> |-<br /> |4<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |80252003<br /> |''† See notes''<br /> |4<br /> |-<br /> |5<br /> |PT0624<br /> |FITTING-ZERK<br /> |80252003<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† It is recommended to replce mounting hardware when replacing Drive Nut Assembly.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Swing Arms &amp; Actuator (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;[Discontinued] Helical Actuator&lt;/big&gt;''''' ====<br /> [[File:BE-TS Swing Arms &amp; Actuator (Helical Actuator).png|alt=BE-TS [Discontinued] Swing Arms &amp; Actuator (Helical Actuator)|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |HELICAL ACTUATOR<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |43057046<br /> |ACTUATOR BASE PLATE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43058022<br /> |SPACER-ACTUATOR<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0725<br /> |BOLT-HHCS-3/4-16 X 4-3/4&quot;-GR8<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0066<br /> |NUT-JAM-3/4-16-GR8<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43055013<br /> |SWING ARM-LHS<br /> |<br /> | rowspan=&quot;6&quot; |''†† See notes''<br /> |1<br /> |-<br /> |7<br /> |HW0620<br /> |BOLT-HHCS-5/8-11 X 1-1/4&quot;<br /> |<br /> |6<br /> |-<br /> |8<br /> |HW0013<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |6<br /> |-<br /> |9<br /> |43055014<br /> |SWING ARM-RHS<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1-1/4&quot;<br /> |<br /> |6<br /> |-<br /> |11<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |6<br /> |-<br /> |12<br /> |43042008<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |43042010<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE, LONG<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |H1619<br /> |ADAPTER-90 DEG-#6 JICM X #4 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |H0010<br /> |FITTING-H-BULKHEAD-1/4 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |H1504<br /> |ADAPTER-#6 JICM X #4 NPTM<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW1082<br /> |CLAMP-HOSE<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Discontinued Helical Actuator no longer available. Must replace with current Helical Actuator Retro Kit 80252032. See [Current] Helical Actuator.'' <br /> <br /> ''†† Swing arms manufactured prior to January 2022 use 10 bolts &amp; washers per Swing Arm.'' <br /> |}<br /> <br /> ==== '''''&lt;big&gt;[Current] Helical Actuator&lt;/big&gt;''''' ====<br /> [[File:BE-TS (Current) Swing Arms &amp; Actuator (Helical Actuator).png|alt=BE-TS (Current) Swing Arms &amp; Actuator (Helical Actuator)|frameless|544x544px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |N/A<br /> |43052020<br /> |HELICAL ACTUATOR ASSEMBLY<br /> |<br /> |''Includes Items 1 through 17''<br /> |1<br /> |-<br /> |1<br /> |HC0180<br /> |HELICAL ACTUATOR<br /> |80252032<br /> |<br /> |1<br /> |-<br /> |2<br /> |43057046<br /> |ACTUATOR BASE PLATE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43058022<br /> |SPACER-ACTUATOR<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0725<br /> |BOLT-HHCS-3/4-16 X 4-3/4&quot;-GR8<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0066<br /> |NUT-JAM-3/4-16-GR8<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43055013<br /> |SWING ARM-LHS<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0620<br /> |BOLT-HHCS-5/8-11 X 1-1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |8<br /> |HW0013<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |9<br /> |43055014<br /> |SWING ARM-RHS<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1-1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |11<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |12<br /> |43042011<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE, 90 DEG<br /> |80252032<br /> |''† See notes''<br /> |1<br /> |-<br /> |13<br /> |43042012<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE, SHORT<br /> |80252032<br /> |''† See notes''<br /> |1<br /> |-<br /> |14<br /> |H1619<br /> |ADAPTER-90 DEG-#6 JICM X #4 SAEM<br /> |80252032<br /> |<br /> |2<br /> |-<br /> |15<br /> |H0010<br /> |FITTING-H-BULKHEAD-1/4 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |H1504<br /> |ADAPTER-#6 JICM X #4 NPTM<br /> |80252032<br /> |<br /> |1<br /> |-<br /> |17<br /> |H1691<br /> |ADAPTER-45 DEG-#6 JICM X #4 NPTM<br /> |80252032<br /> |''† See notes''<br /> |1<br /> |-<br /> |18<br /> |HW1082<br /> |CLAMP-HOSE<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Hard-Pipes and 45 degree adapter required if replacing discontinued actuator with current Actuator Kit Part # 80252032 required for discontinued actuator replacement.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Swing Arm Stops &amp; Tie Plate&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Swing Arm Stops &amp; Tie Plate (Helical Actuator).png|alt=BE-TS Swing Arm Stops &amp; Tie Plate (Helical Actuator)|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43057050<br /> |TIE PLATE-HELICAL SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0113<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0010<br /> |NUT-JAM-5/8-11<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |43057052<br /> |STOP-POLY-SWING ARM<br /> |<br /> |''† See notes''<br /> |4<br /> |-<br /> |6<br /> |HW0441<br /> |BOLT-FHSCS-3/8-16 X 1-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW0031<br /> |NUT-LOCK-3/8-16, DEFORMED THREAD<br /> |<br /> |''† † See notes''<br /> |4<br /> |-<br /> |8<br /> |44555002<br /> |SWING ARM STOP<br /> |<br /> |''Single compartment use only''<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Replacement Poly Stop design updated from Square to Round. Stop Spacers not required with current, Round-Style Stops.''<br /> |-<br /> | colspan=&quot;6&quot; |''† † Deformed Thread Lock Nut replaces Acorn Nut and Split Lock Washer used previously.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Push/Pull Arm Mounting (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Push-Pull Arm Mounting.png|alt=BE-TS Push-Pull Arm Mounting (Helical Actuator)|frameless|542x542px]]<br /> {| class=&quot;wikitable&quot;<br /> ! rowspan=&quot;2&quot; |ITEM<br /> ! rowspan=&quot;2&quot; |BHS PART NUMBER<br /> ! rowspan=&quot;2&quot; |DESCRIPTION<br /> ! rowspan=&quot;2&quot; |REF. KIT NO.<br /> ! rowspan=&quot;2&quot; |NOTES<br /> ! colspan=&quot;3&quot; |NO. REQ<br /> |-<br /> !BE-24<br /> !BE-36<br /> !BE-42<br /> |-<br /> | rowspan=&quot;2&quot; |1<br /> |41655008<br /> |EXTENSION-ARM<br /> |<br /> |''†BE-36 units only''<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |1<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |43455001<br /> |EXTENSION-ARM<br /> |<br /> |''†BE-42 units only''<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |1<br /> |-<br /> |2<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> | colspan=&quot;2&quot; |12<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |12<br /> | colspan=&quot;2&quot; |24<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> | colspan=&quot;2&quot; |12<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |6<br /> | colspan=&quot;2&quot; |12<br /> |-<br /> ! colspan=&quot;8&quot; |NOTES<br /> |-<br /> | colspan=&quot;8&quot; |''† BE-24 units do not utilize an Arm Extension.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Extractor Arm (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Non-Pivoting Vacuum Cup Arm (Helical Actuator)&lt;/big&gt;''''' ====<br /> [[File:BE-TS Non-Pivoting Vacuum Cup Arm (Helical Actuator).png|alt=BE-TS Non-Pivoting Vacuum Cup Arm (Helical Actuator)|frameless|578x578px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0428<br /> |STUD-VACUUM-3/8-16 X 5&quot;<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |2<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |HW-KIT-2<br /> |<br /> |40<br /> |-<br /> |3<br /> |HW1001<br /> |SPRING-3/8&quot;<br /> |HW-KIT-2<br /> |<br /> |24<br /> |-<br /> |4<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0424<br /> |NUT-JAM-3/8-16<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |6<br /> |P0402<br /> |HOSE BARB-1/4&quot; X #4 MNPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |REF<br /> |43052014<br /> |ADJUSTABLE PUSH-PULL ARM<br /> |<br /> |''Includes Items 7 through 11''<br /> |A/R<br /> |-<br /> |7<br /> |43055018<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |43055019<br /> |VACUUM CUP MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Pivoting Vacuum Cup Arm (Helical Actuator)&lt;/big&gt;''''' ====<br /> [[File:BE-TS Pivoting Vacuum Cup Arm (Helical Actuator).png|alt=BE-TS Pivoting Vacuum Cup Arm (Helical Actuator)|frameless|525x525px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43052014<br /> |ADJUSTABLE PUSH-PULL ARM<br /> |<br /> |''Includes Items 1 through 5''<br /> |A/R<br /> |-<br /> |1<br /> |43055018<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43055019<br /> |VACUUM CUP MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |43055020<br /> |MOUNT-PIVOT-VACUUM CUP<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |PT0470<br /> |BEARING-PIVOT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0525<br /> |BOLT-CARRIAGE-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |9<br /> |HW0524<br /> |BOLT-CARRIAGE-1/2-13 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |11<br /> |HW0008<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |16<br /> |-<br /> |12<br /> |43058009<br /> |PLATE-ROTATION STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |43058003<br /> |SLEEVE-STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |43058010<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |4<br /> |-<br /> |16<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |43037002-2<br /> |SUPPORT-CABLE RESTRAINT<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |21<br /> |P0506<br /> |ELBOW-STR-90 DEG-#4 NPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |22<br /> |P0402<br /> |HOSE BARB-1/4&quot; X #4 MNPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |23<br /> |43057056-2<br /> |BRACKET-HOSE SUPPORT<br /> |<br /> |<br /> |2<br /> |-<br /> |24<br /> |PL0507<br /> |GROMMET-5/8&quot; I.D.<br /> |<br /> |<br /> |2<br /> |-<br /> |25<br /> |P0302<br /> |HOSE-VACUUM-1/4&quot; I.D.<br /> |<br /> |''2 pieces at 48&quot; each''<br /> |96&quot;<br /> |-<br /> |26<br /> |HW0443<br /> |BOLT-HHCS-3/8-16 X 3-1/2&quot;<br /> |HW-KIT-3<br /> |<br /> |8<br /> |-<br /> |27<br /> |HW1001<br /> |SPRING-3/8&quot;<br /> |HW-KIT-3<br /> |<br /> |16<br /> |-<br /> |28<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |HW-KIT-3<br /> |<br /> |32<br /> |-<br /> |29<br /> |HW0424<br /> |NUT-JAM-3/8-16<br /> |HW-KIT-3<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Cup Rotation Stop (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Vacuum Cup Rotation Stop (Helical Actuator).png|alt=BE-TS Vacuum Cup Rotation Stop (Helical Actuator)|frameless|583x583px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |445558001<br /> |PLATE-ROTATION STOP<br /> |<br /> |''† Single compartment units only''<br /> |2<br /> |-<br /> |2<br /> |HW0525<br /> |BOLT-CARRIAGE-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0524<br /> |BOLT-CARRIAGE-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0008<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Components (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Vacuum Components (Helical Actuator).png|alt=BE-TS Vacuum Components (Helical Actuator)|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43058021<br /> |STIFFENER PLATE-HELICAL SWING ARM<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |24<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |5<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |12<br /> |-<br /> |6<br /> |P0005<br /> |PUMP-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |P0207<br /> |VALVE-VACUUM RELEASE<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |P0208<br /> |FILTER-HI FLOW<br /> |<br /> |<br /> |3<br /> |-<br /> |9<br /> |H0011<br /> |NIPPLE-#4 X 2&quot;-BRASS<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |P0502<br /> |TEE-#4 FNPT-BRASS<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |P0506<br /> |ELBOW-STR-90 DEG-#4 NPT-BRASS<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |P0503<br /> |NIPPLE-#4 NPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |P0402<br /> |HOSE BARB-1/4&quot; X #4 MNPT-BRASS<br /> |<br /> |<br /> |6<br /> |-<br /> |14<br /> |P0111<br /> |FILTER-VACUUM-IN-LINE<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0206<br /> |SCREW-RHMS-#10-32 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |43037014-2<br /> |BRACKET-CABLE RESTRAINT<br /> |<br /> |<br /> |1<br /> |-<br /> |17<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |18<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |21<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |22<br /> |E0624<br /> |CONNECTOR-1/2&quot;<br /> |<br /> |''Includes Lock Nut''<br /> |1<br /> |-<br /> |23<br /> |HW0212<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Arm (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Arm (Helical Actuator).png|alt=BE-TS Magnet Arm (Helical Actuator)|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43052014<br /> |ADJUSTABLE PUSH-PULL ARM<br /> |<br /> |''Includes Items 1 through 5''<br /> |A/R<br /> |-<br /> |1<br /> |43055018<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43055019<br /> |VACUUM CUP MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |43055016<br /> |MOUNT-PIVOT-MAGNET<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |PT0470<br /> |BEARING-PIVOT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0525<br /> |BOLT-CARRIAGE-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |9<br /> |HW0524<br /> |BOLT-CARRIAGE-1/2-13 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |11<br /> |HW0008<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |16<br /> |-<br /> |12<br /> |43058009<br /> |PLATE-ROTATION STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |43058003<br /> |SLEEVE-STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |43058010<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |18<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |43037002-2<br /> |SUPPORT-CABLE RESTRAINT<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |21<br /> |E0334-6'<br /> |CORD-5 PIN FEMALE<br /> |<br /> |''With 72&quot; lead''<br /> |2<br /> |-<br /> |22<br /> |E1041<br /> |WIRE LOOM-SPIRAL-3/8&quot;<br /> |<br /> |''2 pieces at 24&quot; each''<br /> |48&quot;<br /> |-<br /> |23<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |2<br /> |-<br /> |24<br /> |43057037<br /> |INSULATOR-BOTTOM<br /> |<br /> |<br /> |2<br /> |-<br /> |25<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |26<br /> |41657008<br /> |SLIDE-MAGNET<br /> |<br /> |<br /> |2<br /> |-<br /> |27<br /> |HW0314<br /> |BOLT-FHSCS-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Assembly (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Assembly (Helical Actuator).png|alt=BE-TS Magnet Assembly (Helical Actuator)|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43032009<br /> |MAGNET ASSEMBLY<br /> |<br /> |''Includes Items 1 through 12''<br /> |A/R<br /> |-<br /> |1<br /> |N/A<br /> |ELECTROMAGNET-95VDC<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |E0314<br /> |SENSOR-PROXIMITY-30MM<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |41657002<br /> |COVER-PROXIMITY SENSOR HOUSING<br /> |<br /> |''Rear''<br /> |2<br /> |-<br /> |4<br /> |HW1065<br /> |SCREW-SHCS-#6-32 X 3/8&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW1066<br /> |WASHER-LOCK-#6<br /> |<br /> |<br /> |8<br /> |-<br /> |6<br /> |E0335<br /> |RECEPTACLE-5 PIN MALE<br /> |<br /> |''With 12&quot; lead''<br /> |2<br /> |-<br /> |7<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |E0376<br /> |INDICATOR LIGHT<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |9<br /> |41657003<br /> |COVER-PROXIMITY SENSOR HOUSING<br /> |80252015<br /> |''Front''<br /> |2<br /> |-<br /> |10<br /> |HW0138<br /> |SCREW-FHSCS-#8-32 X 3/8&quot;<br /> |80252015<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |80252014<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW1002<br /> |SPRING-1/2&quot;<br /> |80252014<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |80252014<br /> |<br /> |8<br /> |-<br /> |14<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |80252014<br /> |<br /> |4<br /> |-<br /> |15<br /> |E0336<br /> |METAL OXIDE VARISTOR<br /> |<br /> |''Not shown''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Extractors built or replacement magnets shipped prior to October 2021 used Multi-Piece Indicator Lights with replaceable bulb and lens and are no longer available. Current Indicator Light is a 1-Piece LED assembly. Replacement of any Multi-Piece component requires replacing entire assembly with current, 1-Piece Indicator Light.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Components (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Components (Helical Actuator).png|alt=BE-TS Magnet Components (Helical Actuator)|frameless|534x534px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43058021<br /> |STIFFENER PLATE-HELICAL SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43057051-2<br /> |STIFFENER-MAGNET-HELICAL SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |4<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |24<br /> |-<br /> |5<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |6<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |12<br /> |-<br /> |7<br /> |PL0307<br /> |INSULATOR-MALE STUD<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0106<br /> |WASHER-FLAT-5/16&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |HW0105<br /> |WASHER-LOCK-5/16&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0004<br /> |NUT-HEX-5/16-18<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |12<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |13<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |14<br /> |E1016<br /> |FUSE HOLDER<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |E0325<br /> |FUSE-7 AMP-250VAC<br /> |<br /> |''FLM-7 or FNM-7''<br /> |1<br /> |-<br /> |16<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |17<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Panel (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Panel (Helical Actuator).png|alt=BE-TS Magnet Panel (Helical Actuator)|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41637001<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41637002<br /> |WIRE WAY-SHORT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |41637003<br /> |WIRE WAY-LONG<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |41637004<br /> |TRACK-MOUNTING-SHORT<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |41637005<br /> |TRACK-MOUNTING-LONG<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> | rowspan=&quot;3&quot; |''Mounting track hardware (Not shown)''<br /> |10<br /> |-<br /> |7<br /> |HW0132<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |10<br /> |-<br /> |8<br /> |HW0133<br /> |NUT-NILN-#8-32<br /> |<br /> |16<br /> |-<br /> |9<br /> |E1020<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |12<br /> |-<br /> |10<br /> |E1040<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |E1330<br /> |END ANCHOR<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |E1009<br /> |RECTIFIER-FULL WAVE BRIDGE<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |HW0135<br /> |SCREW-RHMS-#8-32 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |E1313<br /> |SOCKET-RELAY-8 PIN<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |E0331<br /> |RELAY-DPDT-110VAC<br /> |<br /> |''With Indicator Light''<br /> |2<br /> |-<br /> |16<br /> |HW0139<br /> |SCREW-RHMS-#8-32 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Extended Reach Hydraulics (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== &lt;big&gt;''[Discontinued] Helical Actuator''&lt;/big&gt; ====<br /> [[File:BE-TS (Discontinued) Helical Actuator.png|alt=BE-TS (Discontinued) Helical Actuator|frameless|546x546px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43042009<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |H0010<br /> |FITTING-BULKHEAD-3/4-16 X #4 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |43055017<br /> |ELBOW-BULKHEAD<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> | rowspan=&quot;3&quot; |7<br /> |4-48-0402-0402<br /> |HYD HOSE-1/4&quot; X 48&quot; (BE-24 UNITS)<br /> |<br /> | rowspan=&quot;3&quot; |''Cylinder rod-end hose''<br /> | rowspan=&quot;3&quot; |1<br /> |-<br /> |4-54-0402-0402<br /> |HYD HOSE-1/4&quot; X 54&quot; (BE-36 UNITS)<br /> |<br /> |-<br /> |4-56-0402-0402<br /> |HYD HOSE-1/4&quot; X 56&quot; (BE-42 UNITS)<br /> |<br /> |-<br /> | rowspan=&quot;3&quot; |8<br /> |4-38-0402-0402<br /> |HYD HOSE-1/4&quot; X 38&quot; (BE-24 UNITS)<br /> |<br /> | rowspan=&quot;3&quot; |''Cylinder rod-end hose''<br /> | rowspan=&quot;3&quot; |1<br /> |-<br /> |4-44-0402-0402<br /> |HYD HOSE-1/4&quot; X 44&quot; (BE-36 UNITS)<br /> |<br /> |-<br /> |4-46-0402-0402<br /> |HYD HOSE-1/4&quot; X 46&quot; (BE-42 UNITS)<br /> |<br /> |-<br /> |9<br /> |41257035<br /> |STANDOFF-HOSE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW1093<br /> |CLAMP-CABLE-3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0311<br /> |BOLT-FHSCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> ==== &lt;big&gt;''[Current] Helical Actuator''&lt;/big&gt; ====<br /> [[File:BE-TS (Current) Helical Actuator.png|alt=BE-TS (Current) Helical Actuator|frameless|567x567px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43042013<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |H0010<br /> |FITTING-BULKHEAD-3/4-16 X #4 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |43055021<br /> |ELBOW-BULKHEAD<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> | rowspan=&quot;3&quot; |7<br /> |4-48-0402-0402<br /> |HYD HOSE-1/4&quot; X 48&quot; (BE-24 UNITS)<br /> |<br /> | rowspan=&quot;3&quot; |''Cylinder rod-end hose''<br /> | rowspan=&quot;3&quot; |1<br /> |-<br /> |4-54-0402-0402<br /> |HYD HOSE-1/4&quot; X 54&quot; (BE-36 UNITS)<br /> |<br /> |-<br /> |4-56-0402-0402<br /> |HYD HOSE-1/4&quot; X 56&quot; (BE-42 UNITS)<br /> |<br /> |-<br /> | rowspan=&quot;3&quot; |8<br /> |4-38-0402-0402<br /> |HYD HOSE-1/4&quot; X 38&quot; (BE-24 UNITS)<br /> |<br /> | rowspan=&quot;3&quot; |''Cylinder rod-end hose''<br /> | rowspan=&quot;3&quot; |1<br /> |-<br /> |4-44-0402-0402<br /> |HYD HOSE-1/4&quot; X 44&quot; (BE-36 UNITS)<br /> |<br /> |-<br /> |4-46-0402-0402<br /> |HYD HOSE-1/4&quot; X 46&quot; (BE-42 UNITS)<br /> |<br /> |-<br /> |9<br /> |41257035<br /> |STANDOFF-HOSE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW1093<br /> |CLAMP-CABLE-3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0311<br /> |BOLT-FHSCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Extended Reach (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== &lt;big&gt;'''''Non-Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator)'''''&lt;/big&gt; ====<br /> [[File:BE-TS Non-Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator).png|alt=BE-TS Non-Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator)|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41255005<br /> |ARM-EXTENSION<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41255004<br /> |HOUSING-EXTENDED REACH<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0416<br /> |CYLINDER-2 1/2&quot; X 12&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CYLINDER-REAR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-CYLINDER-ROD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JIC X # 6 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |28<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |28<br /> |-<br /> |15<br /> |41258002<br /> |PLATE-BEARING<br /> |80258001<br /> |''Side''<br /> |2<br /> |-<br /> |16<br /> |41258005<br /> |PLATE-SHIM<br /> |80258001<br /> |''Side''<br /> |2<br /> |-<br /> |17<br /> |41258003<br /> |PLATE-BEARING<br /> |80258001<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |18<br /> |41258004<br /> |PLATE-SHIM<br /> |80258001<br /> |''Upper / lower''<br /> |2<br /> |}<br /> &lt;big&gt;'''''Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator)'''''&lt;/big&gt;<br /> <br /> [[File:BE-TS Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator).png|alt=BE-TS Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator)|frameless|553x553px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055011<br /> |ARM-EXTENSION<br /> |<br /> |''Pivoting cup only''<br /> |1<br /> |-<br /> |2<br /> |43055012<br /> |HOUSING-EXTENDED REACH<br /> |<br /> |''Pivoting cup only''<br /> |1<br /> |-<br /> |3<br /> |HC0415<br /> |CYLINDER-2 1/2&quot; X 8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CYLINDER-REAR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-CYLINDER-ROD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JIC X # 6 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |24<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |24<br /> |-<br /> |15<br /> |43058013<br /> |PLATE-BEARING<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |16<br /> |43058016<br /> |PLATE-SHIM<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |17<br /> |43058014<br /> |PLATE-BEARING<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |18<br /> |43058015<br /> |PLATE-SHIM<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |19<br /> |HW1043<br /> |CLAMP-CYLINDER<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |43058019<br /> |SUPPORT-CABLE-BAND CLAMP<br /> |<br /> |<br /> |2<br /> |-<br /> |21<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |22<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |23<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |24<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Extended Reach (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== &lt;big&gt;'''''[Discontinued] Extended Reach Magnet Arm (Helical Actuator)'''''&lt;/big&gt; ====<br /> [[File:BE-TS (Discontinued) Extended Reach Magnet Arm (Helical Actuator).png|alt=BE-TS (Discontinued) Extended Reach Magnet Arm (Helical Actuator)|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055011<br /> |ARM-EXTENSION<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43055012<br /> |HOUSING-EXTENDED REACH<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0415<br /> |CYLINDER-2 1/2&quot; X 8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CYLINDER-REAR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-CYLINDER-ROD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JIC X # 6 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |24<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |24<br /> |-<br /> |15<br /> |43058013<br /> |PLATE-BEARING<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |16<br /> |43058016<br /> |PLATE-SHIM<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |17<br /> |43058014<br /> |PLATE-BEARING<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |18<br /> |43058015<br /> |PLATE-SHIM<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |19<br /> |HW1043<br /> |CLAMP-CYLINDER<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |43058019<br /> |SUPPORT-CABLE-BAND CLAMP<br /> |<br /> |<br /> |2<br /> |-<br /> |21<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |24<br /> |43057004-2<br /> |SUPPORT-CABLE-MAGNET<br /> |<br /> |<br /> |2<br /> |}<br /> &lt;big&gt;'''''[Current] Extended Reach Magnet Arm (Helical Actuator)'''''&lt;/big&gt;<br /> <br /> [[File:BE-TS (Current) Extended Reach Magnet Arm (Helical Actuator).png|alt=BE-TS (Current) Extended Reach Magnet Arm (Helical Actuator)|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |50055004<br /> |ARM-EXTENSION<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |50055005<br /> |HOUSING-EXTENDED REACH<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0415<br /> |CYLINDER-2 1/2&quot; X 8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CYLINDER-REAR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-CYLINDER-ROD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JIC X # 6 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |20<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |20<br /> |-<br /> |15<br /> |50058009<br /> |PLATE-BEARING<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |16<br /> |50058012<br /> |PLATE-SHIM<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |17<br /> |50058010<br /> |PLATE-BEARING<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |18<br /> |50058011<br /> |PLATE-SHIM<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |19<br /> |HW1043<br /> |CLAMP-CYLINDER<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |43058019<br /> |SUPPORT-CABLE-BAND CLAMP<br /> |<br /> |<br /> |2<br /> |-<br /> |21<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |24<br /> |43057004-2<br /> |SUPPORT-CABLE-MAGNET<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> == &lt;big&gt;Drive and Idler Wheels&lt;/big&gt; ==<br /> <br /> === &lt;big&gt;&lt;u&gt;Drive Wheel Mounting&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Drive Wheel Mounting.png|alt=BE-TS Drive Wheel Mounting|frameless|519x519px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0503<br /> |BOLT-HHCS-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |2<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |''Cylinder Bracket bolt only''<br /> |2<br /> |-<br /> |3<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> === &lt;big&gt;&lt;u&gt;Drive Wheel Motors&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Drive Wheel Motors.png|alt=BE-TS Drive Wheel Motors|frameless|535x535px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;2&quot; |1<br /> |43822001-6B<br /> |FLOOR DRIVE ASSEMBLY (W/ 200CC MOTOR)<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |43822004-6B<br /> |FLOOR DRIVE ASSEMBLY (W/ 400CC MOTOR)<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |2<br /> |43827004<br /> |PLATE-MOTOR MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0416<br /> |BOLT-SHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |H1612<br /> |ADAPTER-90 DEG-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |N/A<br /> |ROD-THREADED-1/2-13 X 7 3/4&quot;<br /> |<br /> |''†† See notes''<br /> |8<br /> |-<br /> |7<br /> |N/A<br /> |SPACER-DRIVE WHEEL-4.75&quot; LG<br /> |<br /> |''†† See notes''<br /> |8<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |43827006<br /> |SPACER-DRIVE WHEEL-4.125&quot; LG<br /> |<br /> |Must be ordered as a set of 4<br /> |8<br /> |-<br /> |11<br /> |HW0516<br /> |BOLT-HHCS-1/2-13 X 6 1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |12<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> | rowspan=&quot;2&quot; |13<br /> |N/A<br /> |MOTOR-HYDRAULIC-200CC<br /> |<br /> |''††† Keyed Shaft''<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |N/A<br /> |MOTOR-HYDRAULIC-400CC<br /> |<br /> |''††† Keyed Shaft''<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |14<br /> |HW1071<br /> |KEY-WOODRUFF-#808 STD<br /> |<br /> |<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |15<br /> |HC0124-6B<br /> |MOTOR-HYDRAULIC-200CC<br /> |<br /> |''† Spline Shaft''<br /> |2<br /> |-<br /> |HC0126-6B<br /> |MOTOR-HYDRAULIC-400CC<br /> |80322003<br /> |''† Spline Shaft''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† 200CC Motors required for units equipped with Parallel Drive Circuit.''<br /> ''400CC Motors required for units equipped with Series Drive Circuit.''<br /> <br /> ''See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Cross_Port_Relief Cross Port Relief] section to determine if unit is Parallel or Series equipped and approximate effectivity of each type.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Parts obsolete and no longer available. Must replace with Items 10 &amp; 11.''<br /> |-<br /> | colspan=&quot;6&quot; |''††† Parts obsolete and no longer available. Must replace with Spline Drive Conversion Kit.''<br /> |-<br /> | colspan=&quot;6&quot; |'''''NOTE:''' Effectivity dates refer to dates new extractor units are shipped from the factory. Replacement part effectivity &lt;u&gt;may&lt;/u&gt; differ due to factory inventory levels at time of parts order. Consult factory if unsure of parts needed.''<br /> |}<br /> <br /> === &lt;big&gt;&lt;u&gt;Drive Wheel Bearings&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Drive Wheel Bearings.png|alt=BE-TS Drive Wheel Bearings|frameless|537x537px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43825001<br /> |FRAME-FLOOR DRIVE<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |C0510-1<br /> |WHEEL-10&quot; X 5&quot;-POLY<br /> |80322001<br /> |<br /> |2<br /> |-<br /> |3<br /> |43822003<br /> |SHAFT-WHEEL (W/ COUPLING BODY)<br /> |<br /> |''Available in multiple kits''<br /> |2<br /> |-<br /> |4<br /> |43897004<br /> |KEY-3/8&quot; X 4 3/4&quot;<br /> |80322001<br /> |<br /> |2<br /> |-<br /> |5<br /> |PT0430<br /> |FLANGE BEARING-4 BOLT-1 1/2&quot;<br /> |80322001<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |7<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |16<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |9<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |16<br /> |-<br /> |10<br /> |PT0321<br /> |CHAIN-COUPLING-#50<br /> |<br /> |''Includes connecting pin''<br /> |2<br /> |-<br /> |11<br /> |N/A<br /> |COUPLING BODY-TAPER BORE-#50<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |12<br /> |N/A<br /> |BUSHING-TAPER LOCK-1&quot;<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |13<br /> |HW0323<br /> |BOLT-HHCS-5/16-18 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |14<br /> |PT0330<br /> |COUPLING BODY-#50-SPLINE BORE<br /> |80322003<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW1110<br /> |RETAINING RING-1 1/2&quot;-HEAVY DUTY<br /> |<br /> |''†† Available in multiple kits''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Parts obsolete and no longer available. Spline Drive Conversion Kit required. Reuse of bushing after disassembly not recommended.'' <br /> |-<br /> | colspan=&quot;6&quot; |''† † Retaining Rings used on units shipped after 7/01/12. Units shipped from 7/01/13 are equipped with (2) Retaining Rings per shaft - (1) on each side of the wheel. Units shipped after 11/01/13 are equipped with only (1) Snap Rings as shown. Second Snap Ring is no longer used or required.''<br /> |-<br /> | colspan=&quot;6&quot; |''NOTE: Effectivity dates refer to dates new extractor units are shipped from the factory. Replacement part effectivity &lt;u&gt;'''may'''&lt;/u&gt; differ due to factory inventory levels at time of parts order. Consult factory if unsure of parts needed.''<br /> |}<br /> <br /> === &lt;big&gt;&lt;u&gt;Drive Wheel Assembly&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Drive Wheel Assembly.png|alt=BE-TS Drive Wheel Assembly|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43822005<br /> |RADIAL PISTON DRIVE WHEEL ASSEMBLY<br /> |<br /> |''Includes Items 1 through 6''<br /> |2<br /> |-<br /> |1<br /> |43825003<br /> |RADIAL PISTON DRIVE WHEEL MOUNT<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0160-1<br /> |400CC RADIAL PISTON MOTOR<br /> |<br /> |''Includes nuts &amp; studs''<br /> |1<br /> |-<br /> |REF<br /> |HC0160-STUD<br /> |STUD-M14-1.5 X 46MM<br /> |<br /> |''Replacement motor stud''<br /> |A/R<br /> |-<br /> |REF<br /> |HC0160-NUT<br /> |NUT-FLANGED HEX-M14-1.5<br /> |<br /> |''Replacement motor nut''<br /> |A/R<br /> |-<br /> |3<br /> |C0511<br /> |WHEEL-POLY-10 X 5&quot;-FLANGE MOUNT<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |5<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |6<br /> |-<br /> |7<br /> |H1612<br /> |ADAPTER-H-90 DEG-#10 SAEM X #8 JICM<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |H1539<br /> |ADAPTER-#8 JIC X #6 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1586<br /> |ADAPTER-90 DEG-#8 JICSW X #6 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |H0801<br /> |TEE-H-#6 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H1501<br /> |ADAPTER-#8 JIC X #6 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |H0200<br /> |REDUCER-#6 NPT X #4 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |H0206<br /> |PLUG-#4 NPT<br /> |<br /> |''† Left Drive Wheel only''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Plug used on Left Drive Wheel Assembly only. Hose from Left Drive Wheel Assembly is connected to tee on Right Drive Wheel Assembly.'' <br /> |}<br /> <br /> === &lt;big&gt;&lt;u&gt;Idler Casters&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Idler Casters.png|alt=BE-TS Idler Casters|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |C0500-1<br /> |CASTER-RIGID-10&quot; X 5&quot;-POLY<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |3<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |<br /> |''For Cylinder Bracket position'' <br /> |2<br /> |-<br /> |4<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |16<br /> |-<br /> |5<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |6<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> == &lt;big&gt;Electrical&lt;/big&gt; ==<br /> <br /> === &lt;u&gt;&lt;big&gt;AC Power Stanchion&lt;/big&gt;&lt;/u&gt; ===<br /> <br /> ==== &lt;big&gt;''Aero-Motive Energy Rail''&lt;/big&gt; ====<br /> [[File:BE-TS Aero-Motive Energy Rail.png|alt=BE-TS Aero-Motive Energy Rail|frameless|536x536px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43835001<br /> |STANCHION-POWER<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0511<br /> |BOLT-HHCS-1/2-13 X 3 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |46837014-2<br /> |TOW ARM-COLLECTOR TROLLEY<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |46838015<br /> |SPACER BLOCK-TOW ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW1030<br /> |U-BOLT-3/8-16 X 2&quot; X 5&quot;-SQUARE BEND<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .625&quot; to .750&quot;''<br /> |1<br /> |-<br /> |13<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |HW1051<br /> |EYE BOLT-3/8-16 X 5 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0126<br /> |WASHER-FLAT-3/8&quot;-FENDER<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |BD0010<br /> |TROLLEY-ENERGY RAIL<br /> |<br /> | rowspan=&quot;2&quot; |''Aero-Motive Rail only''<br /> <br /> ''(orange housing color)''<br /> |1<br /> |-<br /> |19<br /> |BD0100<br /> |BRUSH-TROLLEY<br /> |<br /> |4<br /> |}<br /> <br /> ==== '''&lt;big&gt;''Vahle Energy Rail''&lt;/big&gt;''' ====<br /> [[File:BE-TS Vahle Energy Rail.png|alt=BE-TS Vahle Energy Rail|frameless|535x535px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1A<br /> |BD0031<br /> |TROLLEY-ENERGY RAIL, KSL<br /> |<br /> | rowspan=&quot;3&quot; |''† Vahle KSL Rail only''<br /> <br /> ''(green housing color)''<br /> |1<br /> |-<br /> |2A<br /> |BD0040<br /> |BRUSH-PHASE, KSL<br /> |<br /> |3<br /> |-<br /> |3A<br /> |BD0041<br /> |BRUSH-GROUND, KSL<br /> |<br /> |1<br /> |-<br /> |1B<br /> |BD0231<br /> |TROLLEY-ENERGY RAIL, KBH<br /> |<br /> | rowspan=&quot;3&quot; |''† Vahle KBH Rail only''<br /> <br /> ''(gray housing color)''<br /> <br /> ''(Nots shown)''<br /> |1<br /> |-<br /> |2B<br /> |BD0240<br /> |BRUSH-PHASE, KBH<br /> |<br /> |3<br /> |-<br /> |3B<br /> |BD0241<br /> |BRUSH-GROUND, KBH<br /> |<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |4<br /> |BD0030<br /> |TOW ARM-COLLECTOR TROLLEY, KSL<br /> |<br /> |''† Vahle KSL Rail only''<br /> <br /> ''(green housing color)''<br /> |1<br /> |-<br /> |BD0230<br /> |TOW ARM-COLLECTOR TROLLEY, KBH<br /> |<br /> |''† Vahle KBH Rail only''<br /> <br /> ''(gray housing color)''<br /> |1<br /> |-<br /> |5<br /> |46838015<br /> |SPACER-BLOCK-TOW ARM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |6<br /> |41237083-2<br /> |BRACKET-TOW ARM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |7<br /> |HW1054<br /> |U-BOLT-5/16-18 X 2&quot; X 5&quot;-SQUARE BEND<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW0323<br /> |BOLT-HHCS-5/16-18 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0106<br /> |WASHER-FLAT-5/16&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0150<br /> |WASHER-FLAT-5/16&quot;-FENDER<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0105<br /> |WASHER-LOCK-5/16&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0004<br /> |NUT-HEX-5/16-18<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Verify Energy Rail type (KSL OR KBH) by the color of the energy rail housing.'' <br /> |-<br /> | colspan=&quot;6&quot; |''†† Not all units equipped with Tow Arm Bracket. Location of Spacer Block and/or Tow Arm Bracket may vary from configuration shown.'' <br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Control Panel&lt;/big&gt;&lt;/u&gt;''' ===<br /> '''&lt;big&gt;''[Discontinued] Control Panel for Units with 10 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS (Discontinued) Control Panel for Units with 10HP.png|alt=BE-TS (Discontinued) Control Panel for Units with 10HP|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-CONTROL PANEL-16&quot; X 14&quot; X 6&quot;<br /> |<br /> |CONSULT FACTORY<br /> |1<br /> |-<br /> |2<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |Grip size .250&quot; to.375&quot;<br /> |1<br /> |-<br /> |6<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |Grip size .625&quot; to .750&quot;<br /> |2<br /> |-<br /> |7<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |Grip size .500&quot; to .625&quot;<br /> |2<br /> |-<br /> |8<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |''Not shown''<br /> |1<br /> |-<br /> |9<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |''Not shown''<br /> |4<br /> |}<br /> [[File:BE-TS (Discontinued) Control Panel for Units with 10HP Detail.png|alt=BE-TS (Discontinued) Control Panel for Units with 10HP Detail|frameless|556x556px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0640<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |BLANK PANEL WITHOUT HOLES<br /> |1<br /> |-<br /> |2<br /> |E0120<br /> |MAGNETIC STARTER-NEMA 1 3/4&quot;<br /> |<br /> |WITH OVERLOAD<br /> |1<br /> |-<br /> |3<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |<br /> |17<br /> |-<br /> |4<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |<br /> |17<br /> |-<br /> |5<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |17<br /> |-<br /> |6<br /> |E0207-1<br /> |TRANSFORMER<br /> |<br /> |480VAC TO 120VAC, 0.75 Kva<br /> |1<br /> |-<br /> |7<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |HW0003<br /> |NUT-NILN-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |E1023<br /> |WIREWAY<br /> |<br /> |SOLD BY LENGTH<br /> |A/R<br /> |-<br /> |11<br /> |E1024<br /> |MOUNTING TRACK<br /> |<br /> |SOLD BY LENGTH<br /> |A/R<br /> |-<br /> |12<br /> |E1020<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |16<br /> |-<br /> |13<br /> |E1040<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |E1330<br /> |END ANCHOR<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |E0341<br /> |GROUND LUG<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |E0902<br /> |FUSE-6A<br /> |<br /> |FLM-6<br /> |1<br /> |}<br /> <br /> ==== '''&lt;big&gt;''[Current] Control Panel for Units with 20 HP Power Unit''&lt;/big&gt;''' ====<br /> [[File:BE-TS (Current) Control Panel for Units with 20HP.png|alt=BE-TS (Current) Control Panel for Units with 20HP|frameless|601x601px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-24&quot; X 16&quot; X 6&quot;<br /> |<br /> |CONSULT FACTORY<br /> |1<br /> |-<br /> |2<br /> |E0123-1<br /> |HANDLE-DISCONNECT<br /> |<br /> |INCL. MOUNTING SCREWS<br /> |1<br /> |-<br /> |3<br /> |E0662<br /> |RESTRAINT-3/4&quot;-LIQUID TIGHT<br /> |<br /> |INCL. LOCKNUT<br /> |1<br /> |-<br /> |4<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |GRIP SIZE .500&quot; TO .625&quot;<br /> |2<br /> |-<br /> |5<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |GRIP SIZE .625&quot; TO .750&quot;<br /> |1<br /> |-<br /> |6<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |7<br /> |E0661<br /> |RESTRAINT-3/4&quot;-90 DEG-LIQUID TIGHT<br /> |<br /> |INCL. LOCKNUT<br /> |1<br /> |-<br /> |8<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |GRIP SIZE .250&quot; TO .375&quot;<br /> |1<br /> |-<br /> |9<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |GRIP SIZE .450&quot; TO .560&quot;<br /> |2<br /> |-<br /> |10<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |11<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |}<br /> [[File:BE-TS (Current) Control Panel for Units with 20HP Details.png|alt=BE-TS (Current) Control Panel for Units with 20HP Details|frameless|645x645px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |YE0506<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |''Blank panel without holes''<br /> |1<br /> |-<br /> |2<br /> |YE0205-1<br /> |SWITCH-DISCONNECT-80A<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43036007<br /> |SHAFT-DISCONNECT<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |YE0409<br /> |FUSE HOLDER-SINGLE POLE<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |E0914<br /> |FUSE-10A<br /> |<br /> |''FLM-10''<br /> |1<br /> |-<br /> |6<br /> |E0902<br /> |FUSE-6A<br /> |<br /> |''FLM-6''<br /> |1<br /> |-<br /> |7<br /> |E0903<br /> |FUSE-12A<br /> |<br /> |''FLM-12''<br /> |1<br /> |-<br /> |8<br /> |YE0402<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |17<br /> |-<br /> |9<br /> |YE0405<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |YE0406<br /> |END ANCHOR<br /> |<br /> |<br /> |6<br /> |-<br /> |11<br /> |E0136<br /> |FUSE HOLDER-3 POLE<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |YE0901<br /> |FUSE-40A<br /> |<br /> |JTD-40-ID<br /> |3<br /> |-<br /> |13<br /> |E1013<br /> |BASE-RELAY<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |E1012<br /> |RELAY-11 PIN<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |E0137<br /> |FUSE HOLDER-2 POLE<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |YE0902<br /> |FUSE-10A<br /> |<br /> |''KLDR-10''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |17<br /> |N/A<br /> |CONTACTOR, &quot;A40&quot; SERIES<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |E0132-1<br /> |CONTACTOR, &quot;AF38&quot; SERIES<br /> |80332009<br /> |<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |18<br /> |N/A<br /> |OVERLOAD, &quot;TA&quot; SERIES<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |E0131-1<br /> |OVERLOAD, &quot;TF&quot; SERIES<br /> |80332009<br /> |<br /> |1<br /> |-<br /> |19<br /> |E1023<br /> |WIREWAY<br /> |<br /> |''Sold by length''<br /> |A/R<br /> |-<br /> |20<br /> |E0908<br /> |MOUNTING RAIL<br /> |<br /> |''Sold by length''<br /> |A/R<br /> |-<br /> |21<br /> |E1070<br /> |GROUND BAR-4 POSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |22<br /> |E1071<br /> |GROUND BAR-7 POSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |23<br /> |HW1061<br /> |SCREW-RHMS-#8-32 X 1&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |24<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> | rowspan=&quot;3&quot; |''Track and Wireway mounting hardware (Not shown)''<br /> |14<br /> |-<br /> |25<br /> |HW0133<br /> |WASHER-FLAT-#8<br /> |<br /> |14<br /> |-<br /> |26<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |17<br /> |-<br /> |27<br /> |E0139<br /> |AUXILIARY CONTACT BLOCK<br /> |80332009<br /> |''†† See notes''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† &quot;A40&quot; Series Contactor and &quot;TA&quot; Series Overload no longer available as of mid-March 2022. Components must be replaced with current Overload &amp; Relay Kit 80332009.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Auxiliary contact Block required for units equipped with &quot;AF38&quot; Series Contactor &amp; &quot;TF&quot; Series Overload.''<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Transformer&lt;/big&gt;&lt;/u&gt;''' ===<br /> '''&lt;big&gt;''Transformer for Units with 20 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS Transformer for Units with 20HP.png|alt=BE-TS Transformer for Units with 20HP|frameless|554x554px]]<br /> <br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0220<br /> |TRANSFORMER<br /> |<br /> |''480VAC to 120VAC, 3kVA''<br /> |1<br /> |-<br /> |2<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |3<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |7<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |3<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;Operator Console&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Operator Console Electrical.png|alt=BE-TS Operator Console Electrical|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0327<br /> |KEYED ACTUATOR ASSEMBLY<br /> |<br /> |''Includes 2 Keys &amp; Contact Block'' <br /> |1<br /> |-<br /> |2<br /> |E0351<br /> |KEY-REPLACEMENT<br /> |<br /> |''Set of 2 Keys''<br /> |A/R<br /> |-<br /> |3<br /> |E0309-1<br /> |HOUR METER<br /> |<br /> |''† Includes mounting hardware''<br /> |1<br /> |-<br /> |4<br /> |N/A<br /> |SWITCH-SELECTOR-3 POSITION<br /> |<br /> |''ON-OFF-ON, †† See notes''<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |5<br /> |N/A<br /> |LEGEND PLATE-VACUUM<br /> |<br /> |''††† See notes''<br /> |1<br /> |-<br /> |N/A<br /> |LEGEND PLATE-MAGNET<br /> |<br /> |''††† See notes''<br /> |1<br /> |-<br /> |6<br /> |N/A<br /> |CONTACT BLOCK-N/O<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |7<br /> |N/A<br /> |CONTACT BLOCK-N/C<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |8<br /> |E1083<br /> |SWITCH-SELECTOR-3 POSITION<br /> |80232001<br /> |''OFF-ON-OFF''<br /> |1<br /> |-<br /> |9<br /> |E1080<br /> |CONTACT BLOCK-N/O &amp; N/C<br /> |80232001<br /> |<br /> |2<br /> |-<br /> |10<br /> |YE0311<br /> |SWITCH-EMERGENCY STOP<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |YE0407<br /> |LEGEND PLATE-EMERGENCY STOP<br /> |<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Current Hour Meter is 3-Bolt version. Replacement of 4-Bolt version will require new mounting holes to be drilled in dashboard.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Parts no longer available. Must order new Selector Switch Kit 80232001''<br /> |-<br /> | colspan=&quot;6&quot; |''††† Parts no longer available. See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Labels_&amp;_Placards Labels &amp; Placards] section for current Placards''<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;Foot Switch&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Foot Switch Electrical.png|alt=BE-TS Foot Switch Electrical|frameless|701x701px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0301-1<br /> |SWITCH-FOOT OPERATED<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .500&quot; to .625&quot;''<br /> |1<br /> |-<br /> |3<br /> |E0515<br /> |CORD-14-3-SO/SOW<br /> |<br /> |<br /> |9'<br /> |-<br /> |4<br /> |HC0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |''If equipped''<br /> |2<br /> |-<br /> |5<br /> |HC0103<br /> |WASHER-1/4&quot;-LOCK<br /> |<br /> |''If equipped''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Open-Style Switch is a direct replacement for discontinued, Covered-Style Switch.'' <br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''Gate Switch'''&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Gate Switch Electrical.png|alt=BE-TS Gate Switch Electrical|frameless|613x613px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0312<br /> |SWITCH-PUSH BUTTON<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43017041<br /> |MOUNT-GATE SWITCH<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW1077<br /> |SCREW-RHMS-#10-24 X 5/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0307<br /> |BOLT-SHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |PL0502<br /> |GROMMET-3/8&quot; I.D.<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |YE0305<br /> |SWITCH-ROLLER<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |SS0303<br /> |WASHER-FLAT-#8<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |SS0111<br /> |SCREW-SHCS-#8-32 X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |SS0203<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''Proximity Switch'''&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Proximity Switch Electrical.png|alt=BE-TS Proximity Switch Electrical|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0314<br /> |SENSOR-PROXIMITY-30MM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43017027-2<br /> |BRACKET-PROXIMITY SENSOR<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |6<br /> |43017037-2<br /> |ANGLE-PROXIMITY SENSOR TARGET<br /> |<br /> |''Rotary Actuator units'' <br /> |1<br /> |-<br /> |43017084-2<br /> |ANGLE-PROXIMITY SENSOR TARGET<br /> |<br /> |''Helical Actuator units'' <br /> |1<br /> |-<br /> |7<br /> |HW0341<br /> |BOLT-FHSCS-1/4-20 X 5/8&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''120V Receptacle'''&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Proximity Switch Electrical.png|alt=BE-TS Proximity Switch Electrical|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |3<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0650<br /> |RECEPTACLE-DUPLEX<br /> |<br /> |''† 20A''<br /> |1<br /> |-<br /> |5<br /> |E0651<br /> |COVER-RECEPTACLE-DUPLEX<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0655<br /> |RECEPTACLE-GFCI<br /> |<br /> |''20A''<br /> |1<br /> |-<br /> |7<br /> |E0656<br /> |COVER-RECEPTACLE-GFCI<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |E0654<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |E0657<br /> |COVER-RECEPTACLE-DUPLEX/GFCI<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |''Mounting hardware (Not shown)''<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† If Duplex Receptacle has Split Feed (1 set of black &amp; white wires for each plug), the Break-Off Fin must be removed prior to installation.'' <br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''Console Enclosure'''&lt;/big&gt;&lt;/u&gt; ===<br /> <br /> ==== '''&lt;big&gt;''[Discontinued] Operator Console Enclosure for Units with 10 HP Power Unit''&lt;/big&gt;''' ====<br /> [[File:BE-TS (Discontinued) Operator Console Enclosure for Units with 10 HP Power Unit.png|alt=BE-TS (Discontinued) Operator Console Enclosure for Units with 10 HP Power Unit|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-6&quot; X 6&quot; X 4 &quot;<br /> |<br /> |''Consult factory''<br /> |1<br /> |-<br /> |2<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |3<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |4<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |5<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |8<br /> |43817087-2<br /> |BRACKET-MOUNTING-ENCLOSURE<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> | rowspan=&quot;4&quot; |''Mounting bracket hardware (Not shown)''<br /> |2<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |2<br /> |}<br /> '''&lt;big&gt;''[Discontinued] Operator Console Enclosure Panel for Units with 10 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS (Discontinued) Operator Console Enclosure Panel for Units with 10 HP Power Unit.png|alt=BE-TS (Discontinued) Operator Console Enclosure Panel for Units with 10 HP Power Unit|frameless|566x566px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0639<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |''Without holes''<br /> |1<br /> |-<br /> |2<br /> |E1024<br /> |TRACK-TERMINAL BLOCK<br /> |<br /> |''4 7/8&quot; LG''<br /> |1<br /> |-<br /> |3<br /> |E1020<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |9<br /> |-<br /> |4<br /> |E1330<br /> |END ANCHOR<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |E1040<br /> |END BARRIER<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0341<br /> |GROUND LUG<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |''2 for track mounting''<br /> |3<br /> |-<br /> |8<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |''2 for track mounting''<br /> |3<br /> |-<br /> |9<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |''2 for track mounting''<br /> |3<br /> |}<br /> '''&lt;big&gt;''[Current] Operator Console Enclosure for Units with 20 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS (Current) Operator Console Enclosure for Units with 20 HP Power Unit.png|alt=BE-TS (Current) Operator Console Enclosure for Units with 20 HP Power Unit|frameless|549x549px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-8&quot; X 8&quot; X 4&quot;<br /> |<br /> |''Consult factory''<br /> |1<br /> |-<br /> |2<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |3<br /> |-<br /> |3<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .625&quot; to .750&quot;''<br /> |1<br /> |-<br /> |4<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''† Grip size .450&quot; to .560&quot;''<br /> |4<br /> |-<br /> |5<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''†'' ''Grip size .250&quot; to .375&quot;''<br /> |4<br /> |-<br /> |6<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |11<br /> |-<br /> |7<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |E1349<br /> |SEAL-KNOCKOUT-1/2&quot;<br /> |<br /> |''† See notes''<br /> |A/R<br /> |-<br /> |9<br /> |43037003-2<br /> |BRACKET-MOUNTING-ENCLOSURE<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> | rowspan=&quot;4&quot; |''Mounting bracket hardware (Not shown)''<br /> |2<br /> |-<br /> |12<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |2<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Restraints sold for machines equipped with all available options. Machines built without certain options will have Knockout Seals (Item #8) installed in place of restraints.''<br /> |}<br /> '''&lt;big&gt;''[Current] Operator Console Enclosure Panel for Units with 20 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS (Current) Operator Console Enclosure Panel for Units with 20 HP Power Unit.png|alt=BE-TS (Current) Operator Console Enclosure Panel for Units with 20 HP Power Unit|frameless|527x527px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0135<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |''Blank panel without holes''<br /> |1<br /> |-<br /> |2<br /> |E0908<br /> |MOUNTING RAIL<br /> |<br /> |''Sold by length''<br /> |A/R<br /> |-<br /> |3<br /> |YE0402<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |14<br /> |-<br /> |4<br /> |YE0405<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |YE0406<br /> |END ANCHOR<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |E1074<br /> |JUMPER-2 POLE<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |E0130<br /> |GROUND BAR-7 POSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW1061<br /> |SCREW-RHMS-#8-32 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> | rowspan=&quot;3&quot; |''Track and Wireway mounting hardware (Not shown)''<br /> |2<br /> |-<br /> |10<br /> |HW0133<br /> |WASHER-FLAT-#8<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |4<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''Junction Box'''&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Junction Box.png|alt=BE-TS Junction Box|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |2<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |3<br /> |-<br /> |3<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .500&quot; to .625&quot;''<br /> |4<br /> |-<br /> |4<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .625&quot; to .750&quot;''<br /> |2<br /> |-<br /> |5<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Top Module Junction Box&lt;/big&gt;''''' ====<br /> [[File:BE-TS Junction Box.png|alt=BE-TS Junction Box|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1329<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0662<br /> |RESTRAINT-3/4&quot;-LIQUID TIGHT<br /> |<br /> |''Includes Locknut'' <br /> |1<br /> |-<br /> |3<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .625&quot; to .750&quot;''<br /> |1<br /> |-<br /> |4<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Wiring Diagrams&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;BE-TS with 10 HP Motor Wiring Diagram&lt;/big&gt;''''' ====<br /> [[File:BE-TS Wiring Diagram-10HP Motor.png|alt=BE-TS Wiring Diagram-10HP Motor|frameless|800x800px]]<br /> <br /> ==== '''''&lt;big&gt;BE-TS with Magnet and 10 HP Motor Wiring Diagram&lt;/big&gt;''''' ====<br /> [[File:BE-TS with Magnet and 10HP Motor Wiring Diagram.png|alt=BE-TS with Magnet and 10HP Motor Wiring Diagram|frameless|800x800px]]<br /> <br /> ==== '''''&lt;big&gt;BE-TS with Magnet and 20 HP Motor Wiring Diagram&lt;/big&gt;''''' ====<br /> [[File:BE-TS Magnet Wiring Diagram-20HP Motor.png|alt=BE-TS Magnet Wiring Diagram-20HP Motor|frameless|800x800px]]<br /> <br /> [[File:BE-TS Magnet Wiring Diagram-20HP Motor-02.png|alt=BE-TS Magnet Wiring Diagram-20HP Motor-02|frameless|800x800px]]<br /> <br /> [[File:BE-TS Magnet Wiring Diagram-20HP Motor-03.png|alt=BE-TS Magnet Wiring Diagram-20HP Motor-03|frameless|800x800px]]<br /> <br /> [[File:BE-TS Magnet Wiring Diagram-20HP Motor-04.png|alt=BE-TS Magnet Wiring Diagram-20HP Motor-04|frameless|800x800px]]<br /> <br /> == &lt;big&gt;Hydraulics&lt;/big&gt; ==<br /> <br /> === '''&lt;big&gt;&lt;u&gt;[Discontinued] 10 HP Power Unit&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:(Discontinued) BE-TS Power Unit (10HP).png|alt=(Discontinued) BE-TS Power Unit (10HP)|frameless|553x553px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0011<br /> |MOTOR-ELECTRIC-10HP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0326<br /> |ADAPTER-PUMP TO MOTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0325<br /> |PUMP-VANE-16 GPM<br /> |<br /> |''Variable displacement''<br /> |1<br /> |-<br /> |4<br /> |HC0327<br /> |COUPLING BODY-1 3/8&quot;<br /> |<br /> |''Motor end''<br /> |1<br /> |-<br /> |5<br /> |HC0329<br /> |SPIDER-COUPLING INSERT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HC0328<br /> |COUPLING BODY-7/8&quot;<br /> |<br /> |''Pump end''<br /> |1<br /> |-<br /> |7<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1 1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H1549<br /> |ADAPTER-#20 JICM X #24 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |H1595<br /> |ADAPTER-90 DEG-#20 JICM X #20 JICSW<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |H1609<br /> |ADAPTER-90 DEG-#12 JICM X #16 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |H1522<br /> |ADAPTER-#12 JICSW X #12 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |HC0260<br /> |VALVE-MAIN SYSTEM RELIEF<br /> |<br /> |<br /> |1<br /> |-<br /> |15a<br /> |43846003<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''†† For Item 15 (Not shown)''<br /> |A/R<br /> |-<br /> |16<br /> |HC0318<br /> |GAUGE-PRESSURE<br /> |<br /> |<br /> |1<br /> |-<br /> |17<br /> |H0206<br /> |PLUG-#4 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |H1108<br /> |ADAPTER-#10 JICM X #12 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |H1522<br /> |ADAPTER-#12 JICSW X #12 SAEM<br /> |<br /> |''† See note''<br /> |1<br /> |-<br /> |20<br /> |H1542<br /> |ADAPTER-#12 JICM X #12 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |21<br /> |HC0280<br /> |VALVE-CHECK<br /> |<br /> |''† See note''<br /> |1<br /> |-<br /> |22<br /> |H1542<br /> |ADAPTER-#12 JICM X #12 SAEM<br /> |<br /> |''† See note''<br /> |1<br /> |-<br /> |23<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .500&quot; to .625&quot;''<br /> |1<br /> |-<br /> |23a<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |''For Item 23 (Not shown)''<br /> |1<br /> |-<br /> |24<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |25<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |26<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |27<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Parts noted used on units built after April 2001.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Cartridges are for replacement only.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;[Discontinued] 30 Gallon Reservoir&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:(Discontinued) BE-TS 30 Gallon Reservoir.png|alt=(Discontinued) BE-TS 30 Gallon Reservoir|frameless|542x542px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43842001<br /> |RESERVOIR-VERTICAL-30 GAL<br /> |<br /> |''Includes Items 1 through 8''<br /> |1<br /> |-<br /> |1<br /> |HC0542<br /> |GASKET-CHANNEL<br /> |<br /> |''Sold by length''<br /> |7'<br /> |-<br /> |2<br /> |HC0340<br /> |GAUGE-SIGHT<br /> |<br /> |''with Thermometer''<br /> |1<br /> |-<br /> |3<br /> |HC0306<br /> |STRAINER-SUCTION<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HC0308<br /> |FILLER/BREATHER ASSEMBLY<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0209<br /> |SCREW-RHMS-10-32 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |BI0110<br /> |ELBOW-STR-90 DEG-#16 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |8<br /> |H0208<br /> |PLUG-#12 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1590<br /> |ADAPTER-90 DEG-#16 JICM X #16 FNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |BI0102<br /> |ELBOW-#12 FNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |BI0020<br /> |NIPPLE-#12 NPT X 3&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |BI0301<br /> |TEE-#12 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |H1502<br /> |ADAPTER-#8 JICM X #12 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |BI0002<br /> |NIPPLE-CLOSE-#12 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HC0307<br /> |RETURN LINE FILTER ASSEMBLY<br /> |<br /> |''Housing and Filter''<br /> |1<br /> |-<br /> |16<br /> |HC0317<br /> |FILTER-RETURN LINE<br /> |<br /> |''Replacement filter''<br /> |1<br /> |-<br /> |17<br /> |H1509<br /> |ADAPTER-#10 JICM X #12 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> | rowspan=&quot;4&quot; |''Mounting hardware''<br /> <br /> ''(Not shown)''<br /> |4<br /> |-<br /> |19<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |8<br /> |-<br /> |20<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |4<br /> |-<br /> |21<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;[Current] Power Unit (20 HP)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:(Current) BE-TS 30 Power Unit (20 HP).png|alt=(Current) BE-TS 30 Power Unit (20 HP)|frameless|531x531px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0040<br /> |MOTOR-ELECTRIC-20 HP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0357<br /> |ADAPTER-PUMP TO MOTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0356<br /> |PUMP-PISTON-71CC<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HC0358-M<br /> |COUPLING BODY-M300-1 5/8&quot; BORE<br /> |<br /> |''MOTOR SIDE''<br /> |1<br /> |-<br /> |5<br /> |HC0358-I<br /> |SPIDER-COUPLING INSERT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HC0358-P<br /> |COUPLING BODY-M300-1 1/4&quot; BORE<br /> |<br /> |''PUMP SIDE''<br /> |1<br /> |-<br /> |7<br /> |HW0602<br /> |BOLT-HHCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0113<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |H1604<br /> |ADAPTER-90 DEG-#12 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HC0363<br /> |ADAPTER-FLANGE-#32 NPT<br /> |<br /> |''Includes O-ring''<br /> |1<br /> |-<br /> |11<br /> |HC0240<br /> |BLOCK-CHECK VALVE<br /> |<br /> |''Includes Cartridge &amp; O-ring''<br /> |1<br /> |-<br /> |12<br /> |N/A<br /> |CARTRIDGE-CHECK VALVE<br /> |<br /> |''† Replacement cartridge''<br /> |A/R<br /> |-<br /> |13<br /> |H0300<br /> |ELBOW-STR-90 DEG-#4 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |HC0318<br /> |GAUGE-PRESSURE<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |HE0704<br /> |ADAPTER-SPLIT FLANGE-1&quot;<br /> |<br /> |''2-Piece adapter with O-ring''<br /> |1<br /> |-<br /> |16<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |H0211<br /> |ADAPTER-#24 NPT X #12<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |E0661<br /> |RESTRAINT-3/4&quot;-90 DEG-LIQUID TIGHT<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |HW0513<br /> |BOLT-HHCS-1/2-13 X 2 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |20<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |21<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTE<br /> |-<br /> | colspan=&quot;6&quot; |''† Consult factory''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;[Current] 45 Gallon Reservoir&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:(Current) BE-TS 45 Gallon Reservoir.png|alt=(Current) BE-TS 45 Gallon Reservoir|frameless|547x547px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43842010<br /> |45 GAL RESERVOIR ASSEMBLY<br /> |<br /> |''Includes Items 1 through 7''<br /> |A/R<br /> |-<br /> |1<br /> |43848005<br /> |PLATE-COVER<br /> |<br /> |''† See note''<br /> |1<br /> |-<br /> |2<br /> |HC0308<br /> |FILLER/BREATHER ASSEMBLY<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0209<br /> |SCREW-RHMS-10-32 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |4<br /> |HC0340<br /> |GAUGE-SIGHT<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H0208<br /> |PLUG-#12 NPT<br /> |<br /> |''Non-IIoT equipped units only''<br /> |1<br /> |-<br /> |6<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |7<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |8<br /> |HC0361<br /> |HOUSING-FILTER<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HC0354<br /> |CARTRIDGE-FILTER<br /> |<br /> |''10 Micron filtration''<br /> |1<br /> |-<br /> |10<br /> |HC0362<br /> |FLANGE-SUCTION TUBE<br /> |<br /> |''Includes hardware''<br /> |1<br /> |-<br /> |11<br /> |43848008<br /> |TUBE-SUCTION<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |H1569<br /> |ADAPTER-45 DEG-#12 JICM X #12 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |H0202<br /> |REDUCER-#24 SAE X #12 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |H1622<br /> |ADAPTER-90 DEG-#12 SAEM X #12 JICM<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |H1644<br /> |PLUG-#24 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |H1610<br /> |ADAPTER-45 DEG-#12 JICSW X #12 JICM<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |PB0311-1<br /> |NIPPLE-#12 NPT X 2&quot;-BRASS<br /> |<br /> | rowspan=&quot;3&quot; |''†† See notes''<br /> |1<br /> |-<br /> |20<br /> |BI0301<br /> |TEE-#12 FNPT<br /> |<br /> |1<br /> |-<br /> |21<br /> |H1502<br /> |ADAPTER-#8 JICM X #12 MNPT<br /> |<br /> |2<br /> |-<br /> |22<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> | rowspan=&quot;5&quot; |''Reservoir mounting hardware'' <br /> <br /> ''(Not shown)''<br /> |2<br /> |-<br /> |23<br /> |HW0405<br /> |BOLT-HHCS-3/8-16 X 2&quot;<br /> |<br /> |2<br /> |-<br /> |24<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |8<br /> |-<br /> |25<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |4<br /> |-<br /> |26<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† RVT silicone required to seal cover plate after removal.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Components required for units equipped with radial piston drive wheel motors plumbed with case drain hoses. See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Drive_Wheel_Assembly Drive Wheel Assembly] section.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Valve Assembly&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Lift Valve and Manifold Detail&lt;/big&gt;''''' ====<br /> [[File:BE-TS Lift Valve and Manifold.png|alt=BE-TS Lift Valve and Manifold|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |80342001<br /> |LEVER VALVE RETRO KIT<br /> |<br /> |''† Required prior to 2006'' <br /> |A/R<br /> |-<br /> |1<br /> |HC0257<br /> |VALVE-LEVER<br /> |<br /> |''Effective from 2006 to Present''<br /> |1<br /> |-<br /> |2<br /> |HC0252<br /> |MANIFOLD-D05-1 BANK<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0318<br /> |BOLT-SHCS-1/4-20 X 1 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |H1642<br /> |PLUG-#12 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H1542<br /> |ADAPTER-#12 JICM X #12 SAEM<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HC0248<br /> |FIXED FLOW REGULATOR<br /> |<br /> |''††14 GPM''<br /> |1<br /> |-<br /> |12<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |13<br /> |H1540<br /> |ADAPTER-#8 JICM X #8 SAEM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |14<br /> |43817085<br /> |PLATE-ADAPTER-VALVE<br /> |<br /> |''† Not shown''<br /> |1<br /> |-<br /> |15<br /> |SS0104<br /> |BOLT-SHCS-1/4-20 X 5/8&quot;-SST<br /> |<br /> |''† Not shown''<br /> |4<br /> |-<br /> |16<br /> |SS0300<br /> |WASHER-FLAT-1/4&quot;-SAE-SST<br /> |<br /> |''† Not shown''<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |<br /> |-<br /> | colspan=&quot;6&quot; |''† Kit includes Items 1 &amp; 14 through 16. Minor modifications to the dash board required.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† For units shipped April 2017 to present''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Floor Drive / Arm Rotation Valve and Manifold Detail&lt;/big&gt;''''' ====<br /> [[File:BE-TS Floor Drive-Arm Rotation Valve and Manifold.png|alt=BE-TS Floor Drive-Arm Rotation Valve and Manifold|frameless|570x570px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0233<br /> |VALVE-LEVER<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HC0251<br /> |MANIFOLD-D03-2 BANK<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1545<br /> |ADAPTER-#10 JICM X #10 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |H1600<br /> |ADAPTER-90 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |H1587<br /> |ADAPTER-#6 JICSW X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HC0211<br /> |VALVE-ADJUSTABLE FLOW CONTROL<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |H1504<br /> |ADAPTER-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |H1640<br /> |PLUG-#6 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |43817033-2<br /> |RISER PLATE<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |14<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |HC0233-SK<br /> |SEAL KIT<br /> |<br /> |''For Item 1 (Not shown)''<br /> |A/R<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Valve Assembly&lt;/big&gt;''''' ====<br /> [[File:BE-TS Valve Assembly.png|alt=BE-TS Valve Assembly|frameless|538x538px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0233<br /> |VALVE-LEVER<br /> |<br /> |<br /> |3<br /> |-<br /> |2<br /> |HC0250<br /> |MANIFOLD-D03-3 BANK<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1610<br /> |ADAPTER-90 DEG-#10 JICM X #10 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |H1641<br /> |PLUG-#10 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H1000<br /> |ADAPTER-#8 SAEM X #4 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |H0001<br /> |NIPPLE-#4 NPT<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HC0247<br /> |FIXED FLOW REGULATOR-2.25 GPM<br /> |<br /> |''† See notes''<br /> |4<br /> |-<br /> |8<br /> |H1504<br /> |ADAPTER-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |H1640<br /> |PLUG-#6 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |H1540<br /> |ADAPTER-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |43817034-2<br /> |RISER PLATE<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |14<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |15<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HC0233-SK<br /> |SEAL KIT<br /> |<br /> |''For Item 1 (Not shown)''<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Units built prior to January 2107 equipped with Adjustable Flow Controls. Fixed Flow Regulators are direct replacement for Adjustable Flow Controls.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Lift Cylinder&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Lift Cylinder.png|alt=BE-TS Lift Cylinder|frameless|582x582px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43822006<br /> |CLEVIS ASSEMBLY<br /> |<br /> |''Sold as assembly only''<br /> |4<br /> |-<br /> |2<br /> |HW0813<br /> |SCREW-SHSS-3/8-16 X 1/2&quot;<br /> |<br /> |''Nylon tipped''<br /> |8<br /> |-<br /> |3<br /> |HC0420<br /> |CYLINDER-LIFT<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |H1645<br /> |ADAPTER-90 DEG-#8 SAEM X #6 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |H0212<br /> |ADAPTER-#6 NPT X #8 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HC0425<br /> |VELOCITY FUSE<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Lift Circuit&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Lift Circuit.png|alt=BE-TS Lift Circuit|frameless|553x553px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43017014-2<br /> |SUPPORT-PILOT DOWN MANIFOLD<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43718008<br /> |STANDOFF<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0315<br /> |BOLT-HHCS-1/4-20 X 4 1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |10<br /> |-<br /> |7<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |5<br /> |-<br /> |8<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |5<br /> |}<br /> <br /> ==== '''''&lt;big&gt;[Discontinued] Lift Circuit Configuration&lt;/big&gt;''''' ====<br /> [[File:(Discontinued) BE-TS Lift Circuit Configuration.png|alt=(Discontinued) BE-TS Lift Circuit Configuration|frameless|507x507px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |H1507<br /> |ADAPTER-#8 JICM X #8 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0264<br /> |VALVE-CHECK-PILOT TO OPEN<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H1621<br /> |ADAPTER-#4 SAEM X #2 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HC0269<br /> |VALVE-ADJUSTABLE FLOW CONTROL<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |H1591<br /> |ADAPTER-90 DEG-#6 JICM X #2 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |H1587<br /> |ADAPTER-#6 JICSW X #4 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1501<br /> |ADAPTER-#8 JICM X #6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43047002<br /> |MANIFOLD-PILOT DOWN<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> ==== '''''&lt;big&gt;[Current] Lift Circuit Configuration&lt;/big&gt;''''' ====<br /> [[File:(Current) BE-TS Lift Circuit Configuration.png|alt=(Current) BE-TS Lift Circuit Configuration|frameless|534x534px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0215<br /> |VALVE-CHECK-CARTRIDGE<br /> |<br /> |<br /> |8<br /> |-<br /> |2<br /> |H1560<br /> |ADAPTER-45 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |H1670<br /> |ADAPTER-45 DEG-#12 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |H1612<br /> |ADAPTER-90 DEG-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HC0283<br /> |VALVE-COUNTER BALANCE<br /> |<br /> |''Includes cartridge''<br /> |1<br /> |-<br /> |6<br /> |43846004<br /> |CARTRIDGE-COUNTER BALANCE<br /> |<br /> |''Replacement cartridge''<br /> |A/R<br /> |-<br /> |7<br /> |H1552<br /> |ADAPTER-#6 JICM X #6 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |H1587<br /> |ADAPTER-#6 JICSW X #4 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1501<br /> |ADAPTER-#8 JICM X #6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43047002<br /> |MANIFOLD-PILOT DOWN<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Cartridges are for replacement only''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Down-Speed Flow Control&lt;/big&gt;''''' ====<br /> [[File:BE-TS Down-Speed Flow Control.png|alt=BE-TS Down-Speed Flow Control|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0270<br /> |VALVE-ADJUSTABLE FLOW CONTROL<br /> |<br /> |''Pressure compensated''<br /> |1<br /> |-<br /> |2<br /> |H0007<br /> |NIPPLE-#8 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1647<br /> |ADAPTER-90 DEG-#10 SAEM X #8 FNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |H1680<br /> |ADAPTER-#10 JICM X #8 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H1690<br /> |ADAPTER-#10 JICSW X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HC0248<br /> |FIXED FLOW REGULATOR<br /> |<br /> |''14 GPM''<br /> |1<br /> |-<br /> |7<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |H1612<br /> |ADAPTER-90 DEG-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1547<br /> |ADAPTER-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Cross Port Relief&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Mounting Configuration&lt;/big&gt;''''' ====<br /> [[File:BE-TS Cross Port Relief Mounting Configuration.png|alt=BE-TS Cross Port Relief Mounting Configuration|frameless|546x546px]]<br /> {| class=&quot;wikitable&quot;<br /> ! colspan=&quot;6&quot; |UNITS BUILT PRIOR TO SEPTEMBER, 2014<br /> |-<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> ! colspan=&quot;6&quot; |UNITS BUILT SEPTEMBER, 2014 TO DECEMBER, 2014<br /> |-<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW0305<br /> |BOLT-HHCS-1/4-20 X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |7<br /> |43058004<br /> |PLATE-SPACER<br /> |<br /> |<br /> |1<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> ! colspan=&quot;6&quot; |UNITS BUILT DECEMBER, 2014 TO PRESENT<br /> |-<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |2<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |}<br /> ''NOTE: Effectivity dates refer to dates new extractor units shipped from the factory. Replacement part effectivity may differ due to factory inventory levels at time of parts order. Consult factory if unsure of parts needed.''<br /> <br /> ==== '''''&lt;big&gt;Components&lt;/big&gt;''''' ====<br /> [[File:BE-TS Cross Port Relief Components.png|alt=BE-TS Cross Port Relief Components|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0262<br /> |VALVE-CROSS PORT RELIEF<br /> |<br /> |''Includes cartridges''<br /> |1<br /> |-<br /> |2<br /> |43046002<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''For Item 1''<br /> |A/R<br /> |-<br /> |3<br /> |H1540<br /> |ADAPTER-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |H1507<br /> |ADAPTER-#8 JICM X #8 MNPT<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |HC0239<br /> |VALVE-ADJUSTABLE FLOW CONTROL<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |H1568<br /> |ADAPTER-45 DEG-#8 JICM X #8 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |H1646<br /> |ADAPTER-90 DEG-#8 SAEM X #6 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |H0805<br /> |TEE-#6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HC0273<br /> |REGULATOR-FIXED FLOW<br /> |<br /> |''7.0 GPM''<br /> |4<br /> |-<br /> |11<br /> |H1501<br /> |ADAPTER-#8 JICM X #6 MNPT<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Floor Drive Cutout&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Floor Drive Cutout.png|alt=BE-TS Floor Drive Cutout|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |SOLENOID-DRIVE CUTOUT<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |7<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |BI0001<br /> |NIPPLE-CLOSE-#8 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |N/A<br /> |SOLENOID-DRIVE CUTOUT<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |10<br /> |YE0501<br /> |CONNECTOR-SOLENOID<br /> |<br /> |''DIN 43650''<br /> |1<br /> |-<br /> |11<br /> |43058004<br /> |PLATE-SPACER<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |HC0278-TS/QS<br /> |SOLENOID-DRIVE CUTOUT<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |H1547<br /> |ADAPTER-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |H1612<br /> |ADAPTER-90 DEG-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Part obsolete. Must be replaced with Retro Kit Part # 80242007.''<br /> |-<br /> | colspan=&quot;6&quot; |''NOTE: Effectivity dates refer to dates new extractor units shipped from the factory. Replacement part effectivity may differ due to factory inventory levels at time of parts order. Consult factory if unsure of parts needed.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Counter Balance Valve&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Counter Balance Valve.png|alt=BE-TS Counter Balance Valve|frameless|554x554px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0263<br /> |VALVE-COUNTER BALANCE<br /> |<br /> |<br /> |1<br /> |-<br /> |1a<br /> |43046004<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''† For Item 1 (Not shown)''<br /> |A/R<br /> |-<br /> |2<br /> |H1615<br /> |ADAPTER-90 DEG-#6 JICM X #6 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |H1552<br /> |ADAPTER-#6 JICM X #6 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0305<br /> |BOLT-HHCS-1/4-20 X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Cartridges are for replacement only''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Transition Plate&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Transition Plate.png|alt=BE-TS Transition Plate|frameless|576x576px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817067-2<br /> |PLATE-TRANSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |H0020<br /> |UNION-BULKHEAD-45 DEG-#6 JICM<br /> |<br /> |<br /> |8<br /> |-<br /> |3<br /> |H0021<br /> |NUT-BULKHEAD-#6 JIC<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Return Line Manifold&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Return Line Manifold.png|alt=BE-TS Return Line Manifold|frameless|555x555px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43847001<br /> |MANIFOLD-RETURN LINE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |H1501<br /> |ADAPTER-#8 JICM X #6 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1503<br /> |ADAPTER-#12 JICM X #12 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |43817069-2<br /> |BRACKET-BULKHEAD<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |H0015<br /> |UNION-BULKHEAD-90 DEG-#12 JICM<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H0016<br /> |NUT-BULKHEAD-#12 JIC<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;EQ Chain Hose Guard&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS EQ Chain Hose Guard.png|alt=BE-TS EQ Chain Hose Guard|frameless|577x577px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43017074-2<br /> |GUARD-HOSE-EQ CHAIN<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Used on units manufactured after May 2015.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Hydraulic Schematics&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Hydraulic Schematic.png|alt=BE-TS Hydraulic Schematic|frameless|1180x1180px]]<br /> <br /> ==== '''''&lt;big&gt;Extended Reach Hydraulic Schematics&lt;/big&gt;''''' ====<br /> [[File:BE-TS Hydraulic Schematic Extended Reach.png|alt=BE-TS Hydraulic Schematic Extended Reach|frameless|905x905px]]<br /> <br /> == &lt;big&gt;Standard Available Options&lt;/big&gt; ==<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Strobe &amp; Alarm&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''&lt;big&gt;''[Discontinued] Strobe Light &amp; Stanchion Configuration''&lt;/big&gt;''' ====<br /> [[File:(Discontinued) BE-TS Strobe Light.png|alt=(Discontinued) BE-TS Strobe Light|frameless|722x722px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0317<br /> |STROBE LIGHT<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41215014<br /> |STANCHION<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0401<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |E1010<br /> |RECEPTACLE-TWIST LOCK<br /> |<br /> |''(Not shown)''<br /> |1<br /> |-<br /> |7<br /> |E1011<br /> |PLUG-TWIST LOCK<br /> |<br /> |''(Not shown)''<br /> |1<br /> |}<br /> <br /> ==== '''&lt;big&gt;''[Discontinued] Audible Alarm Configuration''&lt;/big&gt;''' ====<br /> [[File:(Discontinued) BE-TS Audible Alarm.png|alt=(Discontinued) BE-TS Audible Alarm|frameless|490x490px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0317-A<br /> |AUDIBLE ALARM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0654<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |00117101-2<br /> |MOUNTING BRACKET<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |5<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> ==== '''&lt;big&gt;''[Current] Stack Light Strobe &amp; Alarm Configuration''&lt;/big&gt;''' ====<br /> [[File:(Current) BE-TS Stack Light Strobe and Alarm Configuration.png|alt=(Current) BE-TS Stack Light Strobe and Alarm Configuration|frameless|844x844px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0362<br /> |MOUNTING BASE<br /> |<br /> |''Includes restraints''<br /> |1<br /> |-<br /> |2<br /> |E0365<br /> |TERMINAL BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0363<br /> |STROBE LIGHT-AMBER-120VAC<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |4<br /> |E0364<br /> |AUDIBLE ALARM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |5<br /> |SS0118<br /> |SCREW-SHCS-#8-32 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |SS0303<br /> |WASHER-FLAT-#8<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |SS0203<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |E1010<br /> |RECEPTACLE-TWIST LOCK<br /> |<br /> |''(Not shown)''<br /> |1<br /> |-<br /> |9<br /> |E1011<br /> |PLUG-TWIST LOCK<br /> |<br /> |''(Not shown)''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† For units not equipped with the audible alarm option, a cap (not shown) mounts on top of the strobe light in place of the audible alarm. Cap included with base.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† For units not equipped with the strobe light option, the audible alarm mounts directly to the terminal base in place of the strobe light.'' <br /> |}<br /> <br /> ==== '''&lt;big&gt;''Strobe &amp; Alarm Mounting''&lt;/big&gt;''' ====<br /> [[File:BE-TS Strobe and Alarm Mounting.png|alt=BE-TS Strobe and Alarm Mounting|frameless|516x516px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41235060<br /> |STACK LIGHT STANCHION<br /> |<br /> |''Discontinued''<br /> |A/R<br /> |-<br /> |2<br /> |HW0401<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |3<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |4<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |REF<br /> |43032006<br /> |STANCHION ASSEMBLY<br /> |<br /> |''Includes items 5 through 8''<br /> |A/R<br /> |-<br /> |5<br /> |43035003<br /> |STACK LIGHT STANCHION<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43037007-2<br /> |CLAMP BRACKET<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0305<br /> |BOLT-HHCS-1/4-20 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0050<br /> |NUT-FLANGED-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |43037004-2<br /> |MOUNTING BRACKET<br /> |<br /> |''Overhead Guard only''<br /> |1<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Horn&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Horn.png|alt=BE-TS Horn|frameless|565x565px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |YE0308<br /> |BUTTON-HORN<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0317-A<br /> |AUDIBLE ALARM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0654<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |00117101-2<br /> |MOUNTING BRACKET<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |11<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Overhead Guard&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Overhead Guard.png|alt=BE-TS Overhead Guard|frameless|530x530px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817119-2<br /> |GUARD-SIDE<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |2<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0406<br /> |BOLT-HHCS-3/8-16 X 2-1/2&quot;<br /> |<br /> |<br /> |5<br /> |-<br /> |5<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |6<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |<br /> |<br /> |5<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Side Guards used on units built November 2013 to Present. Mounting hardware valid for all units with Removable Overhead Guard.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Operator Sheild&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''&lt;big&gt;''[Current] Operator Shield''&lt;/big&gt;''' ====<br /> [[File:(Current) BE-TS 30 Operator Sheild.png|alt=(Current) BE-TS 30 Operator Sheild|frameless|566x566px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43814025<br /> |OPERATOR SHIELD<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |HC0542<br /> |GASKET EDGING<br /> |<br /> |''(2) @ 38&quot; LG, (1) @ 60&quot; LG''<br /> |136&quot;<br /> |-<br /> |3<br /> |43817116-2<br /> |BRACKET-TOP<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |1412FSW<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |43817117-2<br /> |BRACKET-CENTER SUPPORT-OUTSIDE<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43817118-2<br /> |BRACKET-CENTER SUPPORT-INSIDE<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |SS0114<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |8<br /> |SS0502<br /> |LANYARD-8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |SS0501<br /> |PIN-QUICK RELEASE-3/16&quot; X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Consult factory for units built prior to November 2013 with plexiglass bolted directly to Overhead Guard structure on front and sides.'' <br /> |}<br /> <br /> ==== '''&lt;big&gt;''Operator Shield (Used Prior to November 2013)''&lt;/big&gt;''' ====<br /> [[File:BE-TS Operator Shield (Used Prior to November 2013).png|alt=BE-TS Operator Shield (Used Prior to November 2013)|frameless|559x559px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43717116<br /> |SHIELD-OPERATOR<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |43015010<br /> |FRAME-OPERATOR SHIELD WELDMENT<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43017066-2<br /> |SUPPORT-SIDE<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |43017065-2<br /> |SUPPORT-LOWER<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43017067-2<br /> |SUPPORT-UPPER<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |7<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |32<br /> |-<br /> |8<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |9<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |16<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Consult factory for units with plexiglass bolted directly to frame.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Powered Roller Cutout&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Powered Roller Cutout Photo Eye &amp; Reflector Locations (Prior to May 2022)&lt;/big&gt;''''' ====<br /> [[File:BE-TS Powered Roller Cutout Photo Eye &amp; Reflector Locations.png|alt=BE-TS Powered Roller Cutout Photo Eye &amp; Reflector Locations|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1321A<br /> |PHOTO EYE<br /> |<br /> |''† Polarized''<br /> |1<br /> |-<br /> |2<br /> |41217170-2<br /> |MOUNT-PHOTO EYE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0216<br /> |SCREW-#10-24 X 2&quot;<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |4<br /> |HW0032<br /> |NUT-NILN-#10-24<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |E1321-R<br /> |REFLECTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |41217171<br /> |MOUNT-REFLECTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |SS0803<br /> |SCREW-RHMS-#6-32 X 5/8&quot;<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |8<br /> |SS0125<br /> |BOLT-HHCS-1/4-20 X 5/8&quot;<br /> |<br /> |''††† See notes''<br /> |4<br /> |-<br /> |9<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''Quantities provided are for Single-Sided (PRC-1) Power Roller Cutout option. For units with Double Sided (PRC-2) option, quantities are double.''<br /> |-<br /> | colspan=&quot;6&quot; |''† Polarized Photo Eye recommended to prevent potential operational issues with very smooth or shiny battery cases.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Photo Eye &amp; Reflector mounting screws are trimmed to length.''<br /> |-<br /> | colspan=&quot;6&quot; |''††† Photo Eye &amp; Reflector Bracket Mounting Screws may be required to ground flush to prevent intereferance with guards.''<br /> |}<br /> '''''&lt;big&gt;Powered Roller Cutout Photo Eye &amp; Reflector Locations (May 2022 to Present)&lt;/big&gt;'''''<br /> <br /> [[File:BE-TS Powered Roller Cutout Photo Eye &amp; Reflector Locations (May 2022 to Present).png|alt=BE-TS Powered Roller Cutout Photo Eye &amp; Reflector Locations (May 2022 to Present)|frameless|555x555px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1321A<br /> |PHOTO EYE<br /> |<br /> |''† Polarized''<br /> |1<br /> |-<br /> |2<br /> |13537001-2<br /> |MOUNT-PHOTO EYE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E1321-R<br /> |REFLECTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |41217171<br /> |MOUNT-REFLECTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |SS0803<br /> |SCREW-RHMS-#6-32 X 5/8&quot;<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |PL0506<br /> |GROMMET-SEALING-2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''Quantities provided are for Single-Sided (PRC-1) Power Roller Cutout option. For units with Double Sided (PRC-2) option, quantities are double.''<br /> |-<br /> | colspan=&quot;6&quot; |''† Polarized Photo Eye recommended to prevent potential operational issues with very smooth or shiny battery cases.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Reflector mounting screws are trimmed to length.''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Powered Roller Cutout Mounting&lt;/big&gt;''''' ====<br /> [[File:BE-TS Powered Roller Cutout Mounting.png|alt=BE-TS Powered Roller Cutout Mounting|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0281<br /> |SOLENOID VALVE<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |BI0001<br /> |NIPPLE-CLOSE-#8 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |6<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |7<br /> |H1600<br /> |ADAPTER-90 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |H1546<br /> |ADAPTER-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Powered Roller Cutout Override Button&lt;/big&gt;''''' ====<br /> [[File:BE-TS Powered Roller Cutout Override Button.png|alt=BE-TS Powered Roller Cutout Override Button|frameless|568x568px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ACTUATOR-PUSH BUTTON (DISCONTINUED)<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |N/A<br /> |CONTACT BLOCK-N/C (DISCONTINUED)<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |3<br /> |E0384<br /> |ACTUATOR-PUSH BUTTON<br /> |80932002<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0386<br /> |CONTACT BLOCK-N/C<br /> |80932002<br /> |<br /> |1<br /> |-<br /> |5<br /> |E0387<br /> |DUMMY BLOCK<br /> |80932002<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0388<br /> |PUSH BUTTON-GREEN<br /> |80932002<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''Button location on dash may vary from position shown.''<br /> |-<br /> | colspan=&quot;6&quot; |''† Parts no longer available. Must order new Push-Button Switch Kit 80932002''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Powered Roller Cutout Junction Box&lt;/big&gt;''''' ====<br /> [[File:BE-TS Powered Roller Cutout Junction Box.png|alt=BE-TS Powered Roller Cutout Junction Box|frameless|535x535px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |3<br /> |-<br /> |4<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |4<br /> |-<br /> |5<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |7<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |''Mounting bolts (Not shown)''<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Level Assist&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Level Assist.png|alt=BE-TS Level Assist|frameless|568x568px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1321A<br /> |PHOTO EYE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |13537001-2<br /> |MOUNT-PHOTO EYE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |PL0502<br /> |GROMMET<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43837007<br /> |TARGET ANGLE<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |E0376<br /> |INDICATOR LIGHT<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |7<br /> |HW0152<br /> |WASHER-5/8&quot; I.D.<br /> |<br /> |''†† See notes (Not shown)''<br /> |2<br /> |-<br /> |8<br /> |E1321-RT<br /> |REFLECTIVE TAPE<br /> |<br /> |''(Not shown)''<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''Location of Indicator Light on the dash may vary from location shown''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Extractors built prior to October 2021 used Multi-Piece Indicator Lights with Replaceable Bulb and Lens are no longer available. Current Indicator Light is a 1-Piece LED Assembly. Replacement of any Multi-Piece Component requires replacing entire assembly with current, 1-Piece Indicator Light.''<br /> |-<br /> | colspan=&quot;6&quot; |''††† Washers required for units that did not ship with Level Assist option from the factory.''<br /> |}<br /> '''&lt;big&gt;''Level Assist Junction Box''&lt;/big&gt;'''<br /> <br /> [[File:BE-TS Level Assist Junction Box.png|alt=BE-TS Level Assist Junction Box|frameless|524x524px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |4<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |5<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |''Mounting bolts (Not shown)''<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Blue Light&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Blue Light.png|alt=BE-TS Blue Light|frameless|611x611px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |EW2002B<br /> |BLUE PROJECTION SPOTLIGHT<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW0401<br /> |BOLT-HHCS-3/8-16 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0107<br /> |WASHER-LOCK-3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |4<br /> |-<br /> |5<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43835001<br /> |STANCHION-POWER<br /> |<br /> |<br /> |2<br /> |}<br /> [[File:BE-TS Blue Light Enclosure.png|alt=BE-TS Blue Light Enclosure|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-8&quot; X 8&quot; X 4&quot;<br /> |<br /> |''Consult factory''<br /> |1<br /> |-<br /> |2<br /> |E0135<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |''Blank panel without holes''<br /> |1<br /> |-<br /> |3<br /> |PS5R-SC12<br /> |POWER SUPPLY<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0908<br /> |MOUNTING RAIL<br /> |<br /> |''Sold by length''<br /> |A/R<br /> |-<br /> |5<br /> |YE0402<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |YE0405<br /> |END BARRIER<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |YE0406<br /> |END ANCHOR<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |E0341<br /> |GROUND LUG<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |3<br /> |-<br /> |10<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |11<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |''2 per Mounting Rail''<br /> |5<br /> |-<br /> |12<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |''2 per Mounting Rail''<br /> |5<br /> |-<br /> |13<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |''2 per Mounting Rail''<br /> |5<br /> |-<br /> |14<br /> |00196404<br /> |LABEL-DANGER<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Water Cart&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Water Cart.png|alt=BE-TS Water Cart|frameless|549x549px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PB0033<br /> |OVERFILL INDICATOR<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |PB0034<br /> |LOCKNUT-CONDUIT-2&quot;-NYLON<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0308<br /> |FILLER/BREATHER ASSEMBLY<br /> |<br /> |Includes gaskets<br /> |1<br /> |-<br /> |4<br /> |HW0209<br /> |SCREW-RHMS-10-32 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |5<br /> |550-057<br /> |HOSE-FILL-3/4&quot; X 15'<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |550-027<br /> |ON/OFF VALVE<br /> |<br /> |''(Not shown)''<br /> |1<br /> |-<br /> |7<br /> |PB0902<br /> |HOSE-3/4&quot;<br /> |<br /> |<br /> |30&quot;<br /> |-<br /> |8<br /> |HW1018<br /> |HOSE CLAMP-3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |PB0603<br /> |ADAPTER-3/4&quot; NPT X 3/4&quot; BARB<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |PB0456<br /> |ELBOW-STR-90 DEG-3/4&quot; NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |PB0451<br /> |ADAPTER-3/4&quot; NPT X 3/4 GHT<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |PB0302<br /> |PLUG-3/4&quot; NPT<br /> |<br /> |<br /> |<br /> |-<br /> |13<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |14<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |SS0106<br /> |SHCS-#10-24 X 1/2&quot;-SST<br /> |<br /> |<br /> |6<br /> |-<br /> |16<br /> |SS0114<br /> |BHSCS-#10-24 X 1/2&quot; SST<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |SS0301<br /> |WASHER-FLAT-#10-SAE-SST<br /> |<br /> |<br /> |10<br /> |-<br /> |18<br /> |00196701<br /> |DECAL-BHS-12&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |00196404<br /> |LABEL-DANGER-&quot;120 VOLTS&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |20<br /> |00166648<br /> |LABEL, NON-POTABLE<br /> |<br /> |<br /> |1<br /> |-<br /> |21<br /> |HW0418<br /> |BOLT-HHCS-3/8-16 X 2-1/4&quot;<br /> |<br /> | rowspan=&quot;3&quot; |''Mounting bolts'' <br /> <br /> ''(Not shown)''<br /> |2<br /> |-<br /> |22<br /> |HW0031<br /> |NUT-HEX-3/8-16 CENTERLOCK<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |2<br /> |}<br /> [[File:BE-TS Water Cart 2.png|alt=BE-TS Water Cart|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1511<br /> |SWITCH-ROCKER<br /> |<br /> |Submersible rated<br /> |1<br /> |-<br /> |2<br /> |E0378<br /> |INDICATOR LIGHT-120VAC-GREEN<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |3<br /> |E0376<br /> |INDICATOR LIGHT-120VAC-AMBER<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |4<br /> |E0377<br /> |INDICATOR LIGHT-120VAC-RED<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |5<br /> |46917015<br /> |PLACARD-INDICATOR LIGHT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0505<br /> |16-3 SO CORD<br /> |<br /> |<br /> |72&quot;<br /> |-<br /> |7<br /> |E0653<br /> |PLUG-120V/15A<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |9<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |PL0501<br /> |GROMMET-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |E1313<br /> |SOCKET-RELAY-8 PIN<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |E0331<br /> |RELAY-DPDT-110VAC<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |E0440<br /> |TERMINAL BLOCK-8 POLE<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |E1070<br /> |GROUND BAR-4 POSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |HW0139<br /> |SCREW-RHMS-#8-32 X 1 1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |HW0135<br /> |SCREW-RHMS-#8-32 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW1061<br /> |SCREW-RHMS-#8-32 X 1&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |5<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Water carts built prior to October 2021 used Multi-Piece Indicator Lights with Replaceable Bulb and Lens and are no longer available. Current Indicator Lights are a 1-Piece LED Assemblly.'' <br /> <br /> ''Replacement of any Mutli-Piece component requires replacing entire assembly with current 1-Piece Indicator Light.'' <br /> |}<br /> <br /> = &lt;big&gt;Service &amp; Maintenance&lt;/big&gt; =<br /> <br /> == &lt;big&gt;Daily Inspection List&lt;/big&gt; ==<br /> The points listed below should be visually inspected daily prior to initial start up of the Battery Extractor to ensure safe and proper operation of the unit and to help avoid unnecessary down time.<br /> <br /> # Walk around unit and inspect for any physical damage to machine not previously noted.<br /> # Verify all guards are in place.<br /> # Inspect the AC power feed for any damage.<br /> # Vacuum equipped units: Inspect vacuum cups for damage to cup sealing surface, backup casting, and vacuum hoses. Magnet equipped units: Inspect magnets for damage to attachment face, proximity sensor cover, cables and connections.<br /> # Inspect travel path and area around unit for any hydraulic oil that could be a potential repair/maintenance issue and/or safety hazard.<br /> # Check oil level in hydraulic reservoir at fill level gauge.<br /> # Check that operator safety gate and all safety switches are in proper working order.<br /> # Verify extractor path is free of obstructions.<br /> # Check roller beds for any debris and clean as required.<br /> # Board unit, engage system and verify all functions are operating properly and that no abnormal or unusual noises are present.<br /> <br /> ''* Use form IF-5008 when preforming daily inspections''<br /> <br /> == &lt;big&gt;Operator's Daily Checklist&lt;/big&gt; ==<br /> [[File:BE-TS Operator's Daily Checklist.png|alt=BE-TS Operator's Daily Checklist|frameless|1180x1180px]]<br /> <br /> == &lt;big&gt;Recommended Battery Extractor Lubrication Intervals&lt;/big&gt; ==<br /> {| class=&quot;wikitable&quot;<br /> !Lubrication Task<br /> !'''# of Places'''<br /> !Intervals<br /> |-<br /> |'''1. Lubricate grease fittings using #2 lithium based grease'''<br /> |<br /> |<br /> |-<br /> |A. Extractor arm drive nut and carrier bearings<br /> |5 places<br /> |50 hrs / Weekly<br /> |-<br /> |B. Idler casters<br /> |2 places<br /> |200 hrs / Weekly<br /> |-<br /> |'''2. Wipe off and lubricate chains using light machine oil'''<br /> |<br /> |<br /> |-<br /> |A. #80 Lift chains (Not applicable to BE-SL units)<br /> |4 places<br /> |200 hrs / Monthly<br /> |-<br /> |B. #60 Equalization chains<br /> |4 places<br /> |200 hrs / Monthly<br /> |-<br /> |C. #35 Powered roller chains<br /> |8 places<br /> |200 hrs / Monthly<br /> |-<br /> |'''3. Change return line hydraulic fluid filter'''<br /> ''(Oil filtration of at least 20 microns is recommended)''<br /> |1 place<br /> |300 hrs / Twice Quarterly<br /> |-<br /> |'''4. Change hydraulic fluid'''<br /> | -<br /> |600 hrs / Quarterly *<br /> |-<br /> |'''5. Complete preventative maintenance (PM)'''<br /> Use form IF-5029 for Vacuum equipped units.<br /> <br /> Use form IF-5028 for Magnet equipped units.<br /> | -<br /> |600 hrs / Quarterly<br /> |-<br /> ! colspan=&quot;3&quot; |NOTES<br /> |-<br /> | colspan=&quot;3&quot; |''These recommendations are based on average use in a typical warehouse environment and may be adjusted based on specific circumstances. Dusty and/or extreme hot/cold environments may require more frequent lubrication.''<br /> |-<br /> | colspan=&quot;3&quot; |''* BHS recommends implementing an oil sampling and analysis program to monitor hydraulic fluid condition and determine when hydraulic fluid changes are required. The fluid analysis program should be a continuous process and all results should be evaluated. Changes in the condition of the hydraulic system may indicate component wear, fluid deterioration and/or contamination.''<br /> |}<br /> {|<br /> |[[File:NOTICE-warn.png|alt=NOTICE|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:NOTICE-warn.png]]<br /> |<br /> *'''The mounted bearings used on the power rollers, equalization shafts, drive wheels, and drive screw are sealed and shielded bearings. Lubrication may breach the seals of these bearings, therefore these bearings should not be lubricated unless the machine has been cleaned with a high pressure wash on a regular basis (not recommended).'''<br /> *'''Hydraulic fluid should not exceed 140°F (60°C) for extended periods.'''<br /> |}<br /> ===&lt;big&gt;'''&lt;u&gt;Reservoir Capacities ''(APPROX.)''&lt;/u&gt;'''&lt;/big&gt;===<br /> {|<br /> |BE-SL<br /> |18 gal (68 L)<br /> |-<br /> |BE-DS<br /> |18 gal (68 L)<br /> |-<br /> | rowspan=&quot;2&quot; |BE-TS<br /> |30 gal (114 L) ''(Units built Pre-2014)''<br /> |-<br /> |45 gal (170 L) ''(Units built 2014 to Present)''<br /> |-<br /> |BE-QS<br /> |60 gal (227 L)<br /> |}The reservoir should be filled so fluid level is within a half inch (1/2&quot;) of the top of sight glass. Use Chevron AW 68 or equivalent ISO 68 grade hydraulic oil with anti-wear additives and foam suppressant.<br /> <br /> '''''NOTE'':''' Some units shipped from the factory with AW 32 oil for cold environment operation. Units using AW 32 from the factory may experience poor performance if AW 68 is used instead of AW 32 due to the increased viscosity of the oil.<br /> <br /> ==&lt;big&gt;Preventative Maintenance Reports&lt;/big&gt;==<br /> ===&lt;big&gt;&lt;u&gt;Vacuum Extraction&lt;/u&gt;&lt;/big&gt;===<br /> [[File:Battery Extractor Series - Vacuum Extraction Planned Maintenance Inspection Report Page 1.png|alt=Battery Extractor Series - Vacuum Extraction Planned Maintenance Inspection Report Page1|frameless|1238x1238px|link=https://tech.bhs1.com/index.php/File:Battery_Extractor_Series_-_Vacuum_Extraction_Planned_Maintenance_Inspection_Report_Page_1.png]]<br /> <br /> [[File:Battery Extractor Series - Vacuum Extraction Planned Maintenance Inspection Report page2.png|alt=Battery Extractor Series - Vacuum Extraction Planned Maintenance Inspection Report Page 2|frameless|1230x1230px|link=https://tech.bhs1.com/index.php/File:Battery_Extractor_Series_-_Vacuum_Extraction_Planned_Maintenance_Inspection_Report_page2.png]]<br /> ===&lt;big&gt;&lt;u&gt;Magnet Extraction&lt;/u&gt;&lt;/big&gt;===<br /> [[File:Battery Extractor Series - Magnet Extraction Planned Maintenance Inspection Report Page 1.png|alt=Battery Extractor Series - Magnet Extraction Planned Maintenance Inspection Report Page 1|frameless|1224x1224px|link=https://tech.bhs1.com/index.php/File:Battery_Extractor_Series_-_Magnet_Extraction_Planned_Maintenance_Inspection_Report_Page_1.png]]<br /> <br /> [[File:Battery Extractor Series - Magnet Extraction Planned Maintenance Inspection Report Page 2.png|alt=Battery Extractor Series - Magnet Extraction Planned Maintenance Inspection Report Page 2|frameless|1233x1233px|link=https://tech.bhs1.com/index.php/File:Battery_Extractor_Series_-_Magnet_Extraction_Planned_Maintenance_Inspection_Report_Page_2.png]]<br /> <br /> ==&lt;big&gt;80292002-i – Equalization Chain Installation / Resetting Procedure&lt;/big&gt;==<br /> ===&lt;big&gt;&lt;u&gt;Required Tools&lt;/u&gt;&lt;/big&gt;===<br /> *Large standard screwdriver<br /> *1/8&quot;, 5/32&quot;, 3/16&quot; Allen wrench<br /> *(2) 1-1/8&quot; Open-end wrenches<br /> *Needle nose pliers<br /> *6&quot; Steel scale (ruler)<br /> *Brake cleaner (non-chlorinated)<br /> *Loctite #242 (blue)<br /> *80292002 - E.Q. Adjustment stop kit (SL, DS, TS) or 80492001 - BE-QS E.Q. Adjustment stop kit<br /> *Ladder or work platform ''(see notes)''<br /> ===&lt;big&gt;&lt;u&gt;''Optional Tools''&lt;/u&gt;&lt;/big&gt;===<br /> *Wire brush for removing Loctite from components prior to reassembly<br /> ===&lt;big&gt;&lt;u&gt;Notes&lt;/u&gt;&lt;/big&gt;===<br /> *''A ladder, man lift or other device is required to access the upper E.Q. studs on BE-TS and BE-QS units.''<br /> *''The following procedures must be performed with the extractor unloaded and in a level area of the travel path.''<br /> *''Installation of the E.Q. stop kit requires (4) persons plus a trained battery extractor operator to raise and lower the inner carriage.''<br /> *''It is recommended to have new E.Q. chain connecting links on hand prior to performing the following procedures.''<br /> *''The upper E.Q. stud lock washers cannot be reused and must be replaced prior to reassembly.''<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Page 369 Image 0001.png|alt=BE-TS with EQ Adjustment Stops Installed|none|thumb|300x300px|BE-TS with EQ Adjustment Stops Installed|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Page_369_Image_0001.png]]<br /> ===&lt;big&gt;&lt;u&gt;IMPORTANT&lt;/u&gt;&lt;/big&gt;===<br /> *'''Read and understand the Safety and De-energization Procedure TP-606 before starting this procedure.'''<br /> *'''Read and understand these instructions completely before starting this procedure.'''<br /> ===&lt;big&gt;&lt;u&gt;Procedure&lt;/u&gt;&lt;/big&gt;===<br /> 1. Remove the inner and outer frame guards to access the lower equalization studs.<br /> <br /> 2. Raise the inner frame approximately 30&quot; (762 mm) for SL, DS and TS units or 50&quot; (1270 mm) for QS units from the fully lowered position. Install (1) adjustment stop at each corner of the roller bed. See Figure 1.[[File:IOP-400 BE-SL&amp;DS (10-23) EQ Chain Instructions-Figure1.png|alt=|none|thumb|375x375px|FIGURE 1|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_EQ_Chain_Instructions-Figure1.png]]3. Slowly lower the inner carriage until the roller bed is firmly and securely seated against all four stops. See Figure 2.[[File:IOP-400 BE-SL&amp;DS (10-23) Page 370 Image 0002.png|alt=Roller bed firmly seated against all four stops|none|thumb|398x398px|FIGURE 2|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Page_370_Image_0002.png]]4. Lockout/tagout the B.E. per your corporate policy.<br /> <br /> 5. De-energize the B.E. per BHS Safety and De-energization procedure TP-606.<br /> <br /> 6. Loosen and remove the upper hex nuts and remove the upper chain studs. Remove the lock washers from the upper chain studs. Save the hex nuts for reassembly later. Discard the lock washers and obtain new, 3/4&quot; split-ring lock washers for reassembly.<br /> <br /> 7. If replacing the chain, remove the upper stud and remove the chain from the lower stud. Discard the connecting links.<br /> *''If the E.Q. chains are being reset due to a connecting link failure, it is recommended to also replace the stud where the connecting link failed.''<br /> *''It is recommended to replace the connecting links when replacing or resetting the E.Q. chains.''<br /> 8. If replacing a lower stud, remove the connecting link and disconnect the chain. Loosen the hex nut and remove the stud. Remove the hex nut from the old stud and reinstall it on the new stud. Reinstall the new stud so that it is flush with the bottom of the frame and the hole is aligned front-to-back with the extractor.<br /> <br /> 9. Attach the chains to the lower studs using the connecting links. Attach the upper studs to the chains using the connecting links, making sure the nut is threaded down near the connecting link and lay the chains in the frame. See Figure 3.<br /> *''Do not fully assemble the lower connecting links by bending the cotter pins as the connecting link may need to be removed later for stud adjustment.''[[File:IOP-400 BE-SL&amp;DS (10-23) EQ Chain Attached to Upper Stud.png|alt=BE-TS Chain Attached to Upper Stud|none|thumb|300x300px|FIGURE 3|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_EQ_Chain_Attached_to_Upper_Stud.png]]<br /> 10. If new E.Q. sprockets are to be installed, remove the clamp collars and old sprockets. Install the new sprockets and reinstall the clamp collars. DO NOT tighten the set screws at this point as adjustment/alignment may be required.<br /> *''Sprockets MUST be keyed in-line.''<br /> 11. Align the E.Q. shafts so that the keyways are in the 2 o'clock position (approximately 60 degrees from vertical). This will bring the sprocket set screws to the top of the sprocket when the inner carriage is lowered. See Figure 4.[[File:IOP-400 BE-SL&amp;DS (10-23) EQ Shafts aligned 60 Degrees from Vertical.png|alt=BE-TS EQ Shafts aligned 60 Degrees from Vertical|none|thumb|300x300px|FIGURE 4|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_EQ_Shafts_aligned_60_Degrees_from_Vertical.png]]12. Starting with the inside chain, route the chain over the sprocket directly above the lower stud and under the inside sprocket on the opposite shaft. Attach the upper stud to the top cross bar, making sure a new 3/4&quot; split -ring lock washer is installed between the cross bar and lower hex nut. Hand tighten the upper stud adjusting nut to remove slack from the chain. See Figure 5.<br /> <br /> 13. Route the outer chain over the sprocket, above the stud and under the sprocket on the opposite shaft. Attach the upper stud to the top cross bar, making sure a new, 3/4&quot; split-ring lock washer is installed between the cross bar and lower hex nut. Hand tighten the upper stud adjusting nut to remove slack from the chain. See Figure 5.<br /> *''It is recommended to begin at the operator end where room is limited allowing easier access at the opposite end to route the chain under the final sprocket.''<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Inside and Outside EQ Chains.png|alt=BE-TS Inside and Outside EQ Chains|none|thumb|499x499px|FIGURE 5|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Inside_and_Outside_EQ_Chains.png]]14. Repeat steps 11 through 13 for the opposite side of the extractor. It is likely that a large, standard screwdriver will be necessary to position the final chain over the sprocket. See Figure 6.[[File:IOP-400 BE-SL&amp;DS (10-23) Page 371 Image 0002.png|alt=It is likely that a large, standard screwdriver will be necessary to position the final chain over the sprocket.|none|thumb|300x300px|FIGURE 6|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Page_371_Image_0002.png]]15. Adjust the lower studs up or down as necessary to take the slack out of the chain between the lower studs and the sprockets by removing the connecting link from the stud and turning the stud. Tighten the hex nuts against the frame once the studs have been adjusted. Reattach the chain.<br /> *DO NOT allow the stud to twist when tightening the hex nuts.<br /> 16. Tighten the upper hex nut on the upper studs until there is approximately 1/4&quot; (7 mm) of total deflection in the middle of the upper, vertical chain sections. Tighten the lower hex nuts on the upper studs to lock the studs in place.<br /> *''Each section of chain between the sprockets should have approximately the same tension as the other on the same side. See Figure 5.''<br /> 17. Raise the inner frame and remove the adjustment stops from the four corners and lower the inside frame.<br /> <br /> 18. Verify equalization sprocket and stud alignment by using a 6&quot; scale. Measure the distance from the inside roller bed frame to the center of the equalization stud. Compare this distance with the measurements from the inside roller bed frame to the center-lines of the sprockets. Adjust the position of the sprocket as necessary to make the distances equal. This will ensure the chain and sprockets are in line with the stud. Repeat this process for the three remaining chains. See Figures 7 &amp; 8.<br /> <br /> 19. Raise and lower the inner frame several times and listen for any chain popping noises to confirm the sprockets are in line with the lower studs. If there is no popping noise, lower the inner frame all the way down.[[File:IOP-400 BE-SL&amp;DS (10-23) EQ Chain Verify equalization sprocket and stud alignment by using a 6in scale-Fig7.png|alt=BE-TS EQ Chain Procedure Figure 7 - Verify equalization sprocket and stud alignment by using a 6&quot; scale|none|thumb|300x300px|FIGURE 7|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_EQ_Chain_Verify_equalization_sprocket_and_stud_alignment_by_using_a_6in_scale-Fig7.png]][[File:IOP-400 BE-SL&amp;DS (10-23) EQ Chain Verify equalization sprocket and stud alignment by using a 6in scale-Fig8.png|alt=BE-TS EQ Chain Verify equalization sprocket and stud alignment by using a 6in scale - Fig 8|none|thumb|300x300px|FIGURE 8|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_EQ_Chain_Verify_equalization_sprocket_and_stud_alignment_by_using_a_6in_scale-Fig8.png]]20. Clean any existing, hardened Loctite from the sprockets, sprocket sets screws, clamp collars and clamp collar bolts.<br /> <br /> 21. Apply Loctite to and tighten the set screws on the sprockets. Slide the clamp collars against the outside sprocket, loctite and tighten the clamp collars.<br /> ==&lt;big&gt;80292001-i – Battery Extractor Service Stand Installation Instructions&lt;/big&gt;==<br /> ===&lt;big&gt;&lt;u&gt;Required Tools&lt;/u&gt;&lt;/big&gt;===<br /> None<br /> ===&lt;big&gt;&lt;u&gt;Notes&lt;/u&gt;&lt;/big&gt;===<br /> *''Refer to kit part # 80292001 or 80392001 for the complete bill of materials supplied.''<br /> *''Remove ALL batteries from extractor prior to installation / service.''<br /> *''Installation of service stands requires (2) persons plus a trained battery extractor operator to raise and lower the inner carriage. DO NOT attempt installation with less than (3) persons.''<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Single Level Service Stand Properly Installed.png|alt=Single Level Service Stand Properly Installed|none|thumb|368x368px|Single Level Service Stand Properly Installed|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Single_Level_Service_Stand_Properly_Installed.png]]<br /> ===&lt;big&gt;&lt;u&gt;IMPORTANT&lt;/u&gt;&lt;/big&gt;===<br /> *'''Read and understand the Safety and De-energization Procedure TP-606 before starting this procedure.'''<br /> *'''Read and understand these instructions completely before starting this procedure.'''<br /> ===&lt;big&gt;&lt;u&gt;Procedure&lt;/u&gt;&lt;/big&gt;===<br /> 1. Have a qualified operator raise the inner carriage of the extractor to the required height for installation. For single level applications, the required height will be approximately 25&quot; (64 cm) from the fully lowered position. For double, triple, and quad stack machines, the required height will be approximately 55&quot; (140 cm) from the fully lowered position.<br /> *On double, triple, and quad stack battery extractors, the operator either must remain on the operator platform during service or be provided an OSHA approved method of egress. This is not applicable to single level battery extractors as the operator platform height is fixed.<br /> 2. Install the stands by engaging the top of the stand into the inner carriage cutouts. Place the bottom channel of the stand over the tube of the outer frame. The top flanges of each stand are tapered to aid in proper alignment of the stand with the inner frame.<br /> <br /> See Figures 1 &amp; 2.[[File:IOP-400 BE-SL&amp;DS (10-23) engaging the top of the stand into the inner carriage cutout.png|alt=Properly seated in cutout|none|thumb|300x300px|FIGURE 1|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_engaging_the_top_of_the_stand_into_the_inner_carriage_cutout.png]][[File:IOP-400 BE-SL&amp;DS (10-23) Page 374 Image 0005.png|none|thumb|300x300px|FIGURE 2|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Page_374_Image_0005.png]]3. Once BOTH stands have been properly placed, SLOWLY lower the inner carriage while the stands are held in place.<br /> <br /> 4. Once the inner carriage is firmly seated on the service stands, verify the stands are securely installed. See Figure 3.[[File:IOP-400 BE-SL&amp;DS (10-23) Page 374 Image 0006.png|none|thumb|450x450px|FIGURE 3|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Page_374_Image_0006.png]]<br /> ==&lt;big&gt;Trouble Shooting Guide&lt;/big&gt;==<br /> {| class=&quot;wikitable&quot;<br /> !Problem Symptom<br /> !Probable Cause<br /> !Solution<br /> |-<br /> |Hydraulic power Unit does not operate.<br /> No electric to power unit motor.<br /> |1. No AC power to Unit.<br /> 2. Reset on magnetic motor starter tripped.<br /> <br /> 3. Gate switch not actuated.<br /> <br /> 4. Foot Pedal switch not engaged.<br /> <br /> 5. Emergency Stop switch is depressed.<br /> |1. Check fuses or breaker.<br /> 2. Check reset button.<br /> <br /> 3. Make sure safety gate is engaging switch.<br /> <br /> 4. Check foot pedal for obstruction.<br /> <br /> 5. Reset button using machine key.<br /> |-<br /> |Power unit runs but no pressure reading at gauge,<br /> also no functions move.<br /> |1. AC input is in reverse phase. Motor is running backwards.<br /> 2. Main system relief valve stuck open or defective.<br /> <br /> 3. Coupling between motor and pump loose.<br /> |1. Reverse any two of the three hot lines to unit.<br /> 2. Check relief valve cartridge for trash or debris.<br /> <br /> Replace as required.<br /> <br /> 3. Inspect coupling assy.<br /> |-<br /> |Magnetic starter contact chatters-at startup.<br /> Contact chatters while traveling.<br /> |1. 1 leg of 3 phase input power out.<br /> 2. Safety gate and/or gate switch out of adjustment.<br /> |1. Check fuse or circuit breaker at service panel.<br /> 2. Check and adjust gate or switch as required to<br /> <br /> ensure full engagement of plunger on gate<br /> <br /> switch and that the safety gate is not bouncing<br /> <br /> due to vibration.<br /> |-<br /> |No floor travel empty or loaded-all other functions work properly.<br /> |1. Extractor arm off center-left to right.<br /> 2. Proximity switch or sensing bracket out of target range.<br /> <br /> 3. Proximity switch defective or broken.<br /> <br /> 4. Bad solenoid coil on floor cutout valve.<br /> <br /> 5. Spool on floor cutout valve stuck open.<br /> |1. Center arm.<br /> 2. Adjust as needed to achieve 1/4” clearance.<br /> <br /> 3. Check switch and replace.<br /> <br /> 4. Check solenoid and replace if needed.<br /> <br /> 5. Remove and clean spool cartridge or replace.<br /> |-<br /> |Floor travel moves but is sluggish<br /> and stalls with a load at certain points.<br /> |1. Uneven floor conditions. High/low spots.<br /> 2. Excessive tire wear.<br /> <br /> 3. Wheel shaft-to-motor shaft coupling on drive wheel assembly loose or broken.<br /> <br /> 4. Debris lodged under battery extractor.<br /> |1. Check flatness of floor. Check guidance track for scraping of guide arm on top of angle.<br /> 2. Measure under clearance of battery extractor. Should be no less than 5/8” replace poly wheels as needed.<br /> <br /> 3. Inspect drive assembly while under load to see if shafts and couplings are moving in unison. Repair as needed.<br /> <br /> 4. Inspect under unit and remove debris.<br /> |-<br /> |Inner carriage bounces while lifting under load,<br /> but not when empty.<br /> |1. Down speed adjustment valve open too far.<br /> |1. Adjust as needed to eliminate carriage bounce.<br /> |-<br /> |Inner carriage does not lift evenly.<br /> Four corners do not land evenly against outer frame tube.<br /> |1. Equalization chains are out of adjustment.<br /> 2. Excessive chain or sprocket wear.<br /> <br /> 3. Equalization chains are out of synchronization. Possibly may have jumped a sprocket tooth.<br /> <br /> 4. Broken bearing housing on mounted shaft.<br /> <br /> 5. Lift cylinder roping chains out of adjustment.<br /> |1. Readjust with the top stud until equal tension is achieved.<br /> 2. Replace as needed.<br /> <br /> 3. Evaluate and resynchronize as required.<br /> <br /> 4. Inspect and replace.<br /> <br /> 5. Readjust as needed to equal tension on all four cylinders in full down position.<br /> |}<br /> =&lt;big&gt;Aftermarket Support&lt;/big&gt;=<br /> [https://na.bhs1.com/blog/post/tt-922-technical-support Click here] for details on BHS' Aftermarket Support.<br /> =&lt;big&gt;Statement of Warranty&lt;/big&gt;=<br /> [https://store.bhs1.com/warranty Click here] for details on BHS' Statement of Warranty.</div>

Kperrier https://tech.bhs1.com/index.php?title=(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)&diff=7663 2024-04-02T16:52:38Z

<p>Kperrier: /* [Current] Magnet Arm Configuration (Rotary Actuator) */</p> <hr /> <div>'''Looking for a specific replacement part?''' Ctrl-F (or Command-F for Mac users) brings up your browsers search panel and can search any text on the entire web page. Find parts by searching a part # or part description.<br /> <br /> '''Register your equipment with [https://na.bhs1.com/media-library/bhs-optima/ BHS Optima], BHS's free app.'''<br /> <br /> '''California Residents''': WARNING: This product contains chemicals known to the State of California to cause cancer and/or reproductive harm, and birth defects or other reproductive harm. [https://na.bhs1.com/about-bhs/compliance-statement-for-california-proposition-65/ Learn more here.]<br /> =&lt;big&gt;Preface&lt;/big&gt;=<br /> =&lt;big&gt;TP-606 – Safety &amp; De-Energization Procedures&lt;/big&gt;=<br /> ==&lt;big&gt;General Safety&lt;/big&gt;==<br /> {|<br /> |[[File:Read Before Operating Notice.png|alt=Read Before Operating|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:Read_Before_Operating_Notice.png]]<br /> |<br /> *Read and understand all instructions and warnings before using or servicing this equipment.<br /> *Keep these instructions for future reference.<br /> |}<br /> *Battery Extractor (BE) units shall only be operated by suitable persons of at least 18 years of age, who have been trained in the proper and safe operation of the BE and expressly certified/charged, in writing, by the user or their representative.<br /> *Only one person is permitted to travel on the BE at any time.<br /> *BE units shall only be used indoors in an industrial setting on a hard, nonslip, and level floor without defects including but not limited to holes, gouges, cracks, drains or obstacles comprised of concrete or other suitable industrial material meeting the minimum requirements specified by BHS as well as any local requirements.<br /> *A licensed structural engineer should be consulted prior to installing a BE on any building level other than the ground floor.<br /> *BE units are not designed to be shipped or transported after initial delivery.<br /> *Failure to follow these instructions and warnings may result in property damage, personal injury or death.<br /> ===&lt;big&gt;&lt;u&gt;Work Area&lt;/u&gt;&lt;/big&gt;===<br /> *Keep work area clean and well lit. Cluttered work areas and poor lighting can lead to accidents.<br /> *Clean up/contain any fluid spills immediately to prevent slips or falls.<br /> *Be aware of potential hazards when performing any service or maintenance to the unit.<br /> ===&lt;big&gt;&lt;u&gt;Service &amp; Maintenance&lt;/u&gt;&lt;/big&gt;===<br /> Service personnel shall wear Personal Protective Equipment (PPE) appropriate for the task being performed.<br /> {|<br /> |[[File:Electrical Hazard Warning.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Electrical_Hazard_Warning.png]]<br /> [[File:Danger Warning.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Danger_Warning.png|alt=DANGER]]<br /> |<br /> ===&lt;big&gt;&lt;u&gt;Lockout/Tagout&lt;/u&gt;&lt;/big&gt;===<br /> '''Lockout/tagout the BE per your corporate policy, if damaged or not functioning properly. Lockout/tagout and de-energize all systems prior to performing any maintenance or service to unit.'''<br /> |}<br /> {|<br /> |[[File:Warning-Battery-Explosion.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Warning-Battery-Explosion.png]]<br /> [[File:Danger Warning.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Danger_Warning.png|alt=DANGER]]<br /> |<br /> ===&lt;big&gt;&lt;u&gt;Lead-Acid Battery Explosion Hazard&lt;/u&gt;&lt;/big&gt;===<br /> '''DO NOT allow open flames or sparks of any kind near a battery. Highly explosive gas is generated when charging a battery that can remain in battery cells for extended periods of time after charging is complete.'''<br /> *Always wear appropriate PPE including rubber apron, gloves, boots and full face shield when performing service or maintenance to any lead-acid batteries.<br /> *DO NOT place metal or other conductive objects on top of battery. Arcing may occur causing damage to the battery and/or serious personal injury or death.<br /> *Use only chargers matching the voltage and amperage of the battery being charged. Overcharging a battery can cause damage to the battery, charger and/or serious personal injury or death.<br /> *Turn off charger before disconnecting battery from charger. Arcing between battery and charger connectors can cause damage to the connectors and/or serious personal injury or death.<br /> |}<br /> {|<br /> |[[File:Warning-Hydrualic-Hazard.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Warning-Hydrualic-Hazard.png]]<br /> [[File:Warning.png|alt=WARNING|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Warning.png]]<br /> |<br /> ===&lt;big&gt;&lt;u&gt;Hydraulic Hazards&lt;/u&gt;&lt;/big&gt;===<br /> '''AVOID HIGH PRESSURE FLUIDS-Escaping fluid under pressure can penetrate the skin causing serious injury. Relieve pressure before disconnecting hydraulic lines. Tighten all connections before applying pressure. Keep hands and body away from pin holes which eject fluids under high pressure. Use a piece of cardboard or paper to search for leaks. DO NOT use your hand.'''<br /> <br /> '''Any fluid injected into the skin under high pressure should be considered a serious medical emergency despite an initial normal appearance of the skin. There will be a delayed onset of pain, and serious tissue damage may occur. Medical attention should be sought immediately.'''<br /> |}<br /> {|<br /> ![[File:No Pacemakers Notice.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:No_Pacemakers_Notice.png]][[File:Strong Magnet Field Hazard Warning.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Strong_Magnet_Field_Hazard_Warning.png]]<br /> [[File:Warning.png|alt=WARNING|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Warning.png]]<br /> |<br /> ===&lt;big&gt;&lt;u&gt;Electromagnet Hazard&lt;/u&gt;&lt;/big&gt;===<br /> '''Units equipped with magnetic extraction generate strong magnetic fields. Persons with pacemakers &lt;u&gt;SHOULD&lt;/u&gt;''' &lt;u&gt;'''NOT'''&lt;/u&gt; '''operate or be in close proximity to equipment during operation.'''<br /> <br /> '''Failure to comply with this direction''' '''could result in serious personal injury or death.'''<br /> |}<br /> ===&lt;big&gt;&lt;u&gt;Operational Safety&lt;/u&gt;&lt;/big&gt;===<br /> *Only personnel trained in the proper and safe operation of BE units may operate or service the BE.<br /> *Operators shall wear appropriate PPE suitable for working with industrial lead-acid batteries while operating the BE ''(See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Lead-Acid_Battery_Explosion_Hazard Lead-Acid Battery Explosion Hazard] section).''<br /> *All data plates, warning labels, placards, etc. shall be in place and legible at all times. Contact BHS for re-placement data plates, warning labels, placards or instructions.<br /> *All users and service personnel shall be familiar with the meaning and risks associated with all data plates, warning labels, etc.<br /> *All operators and service personnel shall be aware of potential crush and shear points while operating or servicing the BE.<br /> *Keep hands and arms inside the operator compartment while operating the BE.<br /> *Remove BE from service if damaged, defective, or operating improperly (or becomes such while operating) until repairs can be made to correct any problem(s).<br /> *All operators shall be aware of the location of the end stops in the travel path to prevent driving the BE into the end stops.<br /> ===&lt;u&gt;&lt;big&gt;Do's and Don'ts&lt;/big&gt;&lt;/u&gt;===<br /> *'''DO NOT''' exceed the maximum capacity of the BE.<br /> *'''DO NOT''' modify or fit the BE with attachments without prior, written approval from BHS.<br /> *'''DO NOT''' perform any maintenance or service to the BE with a battery loaded on the BE.<br /> *'''DO NOT''' allow anyone to ride in or on the BE.<br /> *'''DO NOT''' operate the BE with any guard or cover removed unless required for maintenance or repair.<br /> *Disconnect the BE from all power sources before attempting to perform service or maintenance to the unit.<br /> *'''DO NOT''' drive the BE into the end stops.<br /> *'''DO NOT''' operate the BE if disengaged from the guidance track.<br /> *'''DO NOT''' allow a battery to exit the BE when a lift truck or battery stand is not present to accept the battery.<br /> *'''DO NOT''' rotate the arm onto a battery such that any part of the extractor arm, vacuum cup or magnet contacts the top of the battery.<br /> *'''DO NOT''' allow anyone to enter the area under the carriage without the service stands properly installed.<br /> *'''DO NOT''' use the BE in a manner for which it is not intended. Some examples of prohibited use are but not limited to:<br /> **To transport people<br /> **As a vehicle jack<br /> **To lift loads greater than its rated load capacity<br /> **Where unintentional movement may exist<br /> **Having direct contact with foodstuffs<br /> **In a potentially explosive atmosphere<br /> ==&lt;big&gt;De-Energization&lt;/big&gt;==<br /> 1. Fully lower the BE roller bed or position the roller bed on service stands if service requires the bed be raised. See Figures 1 &amp; 2.<br /> {|<br /> |[[File:WARNING-warn.png|alt=WARNING|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:WARNING-warn.png]]<br /> !Failure to properly support the roller bed when performing service under the BE could result in injury from the roller bed lowering unexpectedly.<br /> |}[[File:IOP-400 BE-SL&amp;DS (10-23) Fully Lower BE Roller Bed.png|alt=Fully lowered BE roller bed|none|thumb|FIGURE 1|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Fully_Lower_BE_Roller_Bed.png]][[File:IOP-400 BE-SL&amp;DS (10-23) BE Roller Bed on Service Stands .png|alt=Raised BE roller bed positioned on service stands|none|thumb|FIGURE 2|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_BE_Roller_Bed_on_Service_Stands_.png]]2. Turn key on dashboard to the “OFF” position. See Figure 3.[[File:IOP-400 BE-SL&amp;DS (10-23) De-Energization Figure 3.png|alt=Key on BE dashboard turned to the “OFF” position.|none|thumb|FIGURE 3|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_De-Energization_Figure_3.png]]3. Disconnect power to the extractor or shut off the electrical branch circuit breaker.<br /> {|<br /> |[[File:Danger Warning.png|alt=DANGER|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Danger_Warning.png]]<br /> |'''Failure to disconnect electrical power to the BE could result in electrical shock. Serious personal injury or death will occur.'''<br /> |}4. Actuate all hydraulic levers in both directions to re-lease any stored hydraulic pressure. See Figure 4.<br /> {|<br /> |[[File:WARNING-warn.png|alt=WARNING|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:WARNING-warn.png]]<br /> |'''Failure to release any stored hydraulic pres-sure could result in injury from:'''<br /> *'''Escaping hydraulic fluid under high pressure (see ''[https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Hydraulic_Hazards HYDRAULIC HAZARDS]'' in the ''[https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#General_Safety GENERAL SAFETY]'' section).'''<br /> *'''Unexpected movement of hydraulic components.'''<br /> |}[[File:IOP-400 BE-SL&amp;DS (10-23) Actuate all Hydraulic Levers in Both Directions.png|alt=Actuate all hydraulic levers in both directions to release any stored hydraulic pressure.|none|thumb|FIGURE 4|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Actuate_all_Hydraulic_Levers_in_Both_Directions.png]]<br /> ==&lt;big&gt;Labels &amp; Placards&lt;/big&gt;==<br /> '''Operators should be familiar with the meaning of the following labels and placards found on the BE to ensure proper and safe operation.'''<br /> {| class=&quot;wikitable&quot;<br /> |-<br /> ![[File:Read Before Operating Notice.png|alt=Read Before Operating|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Read_Before_Operating_Notice.png]]<br /> |'''Read and understand instruction manual prior to use.'''<br /> |-<br /> ![[File:Lockout-Before-Servicing-Notice.png|alt=Lockout Before Servicing Unit|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Lockout-Before-Servicing-Notice.png]]<br /> |'''Lockout before servicing.'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Extractor Arm Positioning Arrows.png|alt=BE-SL &amp; BE-DS Extractor Arm Positioning Arrows|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Extractor_Arm_Positioning_Arrows.png]]<br /> |'''Extractor arm positioning arrows'''<br /> |-<br /> ![[File:Do Not Operate Without Guards or Covers Notice.png|alt=DO NOT Operate Without Guards or Covers Notice|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Do_Not_Operate_Without_Guards_or_Covers_Notice.png]]<br /> |'''DO NOT operate with guards or covers removed'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) No Riders Allowed.png|alt=No riders allowed|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_No_Riders_Allowed.png]]<br /> |'''NO riders allowed.'''<br /> |-<br /> ![[File:No Pacemakers Notice.png|alt=DO NOT operate by or in close proximity to people with pacemakers.|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:No_Pacemakers_Notice.png]]<br /> |'''DO NOT operate by or in close proximity to people with pacemakers.'''<br /> |-<br /> ![[File:Strong Magnet Field Hazard Warning.png|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Strong_Magnet_Field_Hazard_Warning.png]]<br /> [[File:Warning.png|alt=WARNING|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Warning.png]]<br /> |'''Strong Magnet Field Hazard'''<br /> *Attraction between magnet and metallic objects can crush.<br /> *Keep unsecured metallic objects away from magnet.<br /> *De-energize and lockout/tagout before servicing.<br /> |-<br /> ![[File:Chain Entanglement Hazard Warning.png|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Chain_Entanglement_Hazard_Warning.png]]<br /> [[File:Warning.png|alt=WARNING|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Warning.png]]<br /> |'''Chain Entanglement Hazard'''<br /> *Moving chains and sprockets can crush and cut.<br /> *Keep hands and fingers clear. Do not operate with guards removed.<br /> *De-energize and lockout/tagout before servicing.<br /> |-<br /> ![[File:Electrical Hazard Warning.png|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Electrical_Hazard_Warning.png]]<br /> [[File:Danger Warning.png|alt=DANGER|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Danger_Warning.png]]<br /> |'''Electrical Hazard'''<br /> *Energized components can cause electrical shock.<br /> *De-energize and lockout/tagout before servicing.<br /> |-<br /> ![[File:BE-SL and BE-DS Power Off-On.png|alt=BE-SL and BE-DS Power Off-On|frameless|180x180px|link=https://tech.bhs1.com/index.php/File:BE-SL_and_BE-DS_Power_Off-On.png]]<br /> |'''Power Off/On'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Horn Control.png|alt=BE-SL and BE-DS Horn Control |frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Horn_Control.png]]<br /> |'''Horn (If equipped)'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Vacuum Control.png|alt=BE-SL and BE-DS Vacuum Control |frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Vacuum_Control.png]]<br /> |'''Vacuum Off/On (If equipped)'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Magnet Extraction.png|alt=BE-SL and BE-DS Magnet Off/On|frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Magnet_Extraction.png]]<br /> |'''Magnet Off/On (If equipped)'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Powered Roller Cut Off Override.png|alt=BE-SL and BE-DS Powered Roller Cut Off Override|frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Powered_Roller_Cut_Off_Override.png]]<br /> |'''Powered Roller Cutout Override (If equipped)'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Rack-Level-Assist.png|alt=BE-SL and BE-DS Rack Level Assist |frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Rack-Level-Assist.png]]<br /> |'''Rack Level Assist Indicator (If equipped)'''<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> ! rowspan=&quot;3&quot; |[[File:IOP-400_BE-SL&amp;DS_(10-23)_Power_Rollers_and_Arm_Travel.png.png|alt=BE-SL &amp; DS Powered Roller and Arm Travel Controls|frameless|504x504px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Power_Rollers_and_Arm_Travel.png.png]]<br /> |'''Far Power Rollers'''<br /> |-<br /> |'''Arm Travel'''<br /> |-<br /> |'''Near Power Rollers'''<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> |+''BE-SL &amp; DS UNITS ONLY''<br /> ! colspan=&quot;3&quot; |[[File:IOP-400 BE-SL&amp;DS (10-23) BE-SL&amp;DS Units Platform Controls.png|alt=BE-SL &amp; DS Specific Controls|frameless|460x460px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_BE-SL&amp;DS_Units_Platform_Controls.png]]<br /> |-<br /> |Drive Forward/Reverse<br /> |Platform Raise/Lower<br /> |Arm Rotation Near/Far<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> |+''BE-TS &amp; QS UNITS ONLY''<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) BE-TS &amp; BE-QS Platform Raise and Lower Controls.png|alt=BE-TS &amp; BE-QS Platform Raise and Lower Controls|frameless|240x240px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_BE-TS_&amp;_BE-QS_Platform_Raise_and_Lower_Controls.png]]<br /> ! colspan=&quot;2&quot; |[[File:IOP-400 BE-SL&amp;DS (10-23)BE-TS &amp; BE-QS Specific Controls.png|alt=BE-TS &amp; BE-QS Specific-Controls|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)BE-TS_&amp;_BE-QS_Specific_Controls.png]]<br /> |-<br /> |Platform Raise/Lower<br /> |Drive Foward/Reverse<br /> |Arm Rotation Near/Far<br /> |}<br /> =&lt;big&gt;General Information&lt;/big&gt;=<br /> ==&lt;big&gt;Specification Data&lt;/big&gt;==<br /> [[File:BE-TS Specification Data.png|alt=IOP-401 BE-TS (10-23) Specification Data|frameless|600x600px]]<br /> {| class=&quot;wikitable&quot;<br /> | colspan=&quot;2&quot; |<br /> !BE-24-2-TS<br /> !BE-36-2-TS<br /> !BE-42-2-TS<br /> |-<br /> !A<br /> |Overall Length<br /> |156.5&quot;<br /> |180.5&quot;<br /> |192.5&quot;<br /> |-<br /> !B<br /> |Overall Width<br /> |72&quot;<br /> |72&quot;<br /> |72&quot;<br /> |-<br /> !C<br /> |Overall Height (Lowered)<br /> |158.188&quot;<br /> |158.188&quot;<br /> |160.688&quot;<br /> |-<br /> !<br /> |Overall Height (Raised w/ Overhead Guard)<br /> |182.375&quot;<br /> |182.375&quot;<br /> |182.375&quot;<br /> |-<br /> !<br /> |Overall Height (Raised w/ Strobe &amp; Alarm)<br /> |191.75&quot;<br /> |191.75&quot;<br /> |191.75&quot;<br /> |-<br /> !D<br /> |Wheel Base<br /> |98&quot;<br /> |122&quot;<br /> |134&quot;<br /> |-<br /> !E<br /> |Drive Wheel Center line<br /> |51&quot;<br /> |51&quot;<br /> |51&quot;<br /> |-<br /> !F<br /> |Battery Compartment Width<br /> |24&quot;<br /> |36&quot;<br /> |42&quot;<br /> |-<br /> !G<br /> |Ground Clearance<br /> |.625&quot;<br /> |.625&quot;<br /> |.625&quot;<br /> |-<br /> !H<br /> |Minimum Roller Height<br /> |6.5&quot;<br /> |6.5&quot;<br /> |6.5&quot;<br /> |-<br /> !I<br /> |Maximum Roller Height<br /> |96&quot;<br /> |96&quot;<br /> |96&quot;<br /> |-<br /> !J<br /> |Operator Platform Height (Lowered/Raised)<br /> |11&quot; / 103&quot;<br /> |11&quot; / 103&quot;<br /> |11&quot; / 103&quot;<br /> |}<br /> <br /> === UNITS WITH 10 HP POWER UNIT USED PRIOR TO DECEMBER, 2014 ===<br /> {| class=&quot;wikitable&quot;<br /> !<br /> !BE-24-2-TS<br /> !BE-36-2-TS<br /> !BE-42-2-TS<br /> |-<br /> |Travel Speed<br /> |0 to 190 ft/min / 0 to 0.97 m/s<br /> |0 to 190 ft/min / 0 to 0.97 m/s<br /> |0 to 190 ft/min / 0 to 0.97 m/s<br /> |-<br /> |Raise - Lower Speed<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |-<br /> |Powered Roller Speed<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |-<br /> |Arm Traverse Speed<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |-<br /> |Arm Rotation Time<br /> |6 s to 8 s<br /> |6 s to 8 s<br /> |6 s to 8 s<br /> |-<br /> |Draw Bar Pull / Vacuum<br /> <br /> (12&quot; / 305 mm Round Cup)<br /> |1,000 lb / 454 kg<br /> |1,000 lb / 454 kg<br /> |1,000 lb / 454 kg<br /> |-<br /> |Draw Bar Pull Magnet*<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |-<br /> |Vacuum Attach Time<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |-<br /> |Vacuum Release Time<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |-<br /> |Input Voltage<br /> |480 V / 3 ph / 60Hz<br /> |480 V / 3 ph / 60Hz<br /> |480 V / 3 ph / 60Hz<br /> |-<br /> |AC Current Draw<br /> |16.5 A<br /> |16.5 A<br /> |16.5 A<br /> |-<br /> |Control Circuit Voltage<br /> |120 V ac<br /> |120 V ac<br /> |120 V ac<br /> |-<br /> |Hydraulic Power Unit<br /> |10 hp / 7.46 kW<br /> |10 hp / 7.46 kW<br /> |10 hp / 7.46 kW<br /> |-<br /> |Hydraulic Pump<br /> |16 gal/min / 61 L/min<br /> |16 gal/min / 61 L/min<br /> |16 gal/min / 61 L/min<br /> |-<br /> |Power Unit<br /> |Hydraulic, Variable Displacement<br /> |Hydraulic, Variable Displacement<br /> |Hydraulic, Variable Displacement<br /> |-<br /> |Operating Pressure<br /> |1,500 psi / 103 bar<br /> |1,500 psi / 103 bar<br /> |1,500 psi / 103 bar<br /> |-<br /> |Vacuum Pump<br /> |1/3 hp / 0.25 kW<br /> |1/3 hp / 0.25 kW<br /> |1/3 hp / 0.25 kW<br /> |-<br /> |Vacuum<br /> |21&quot; Hg / 711 mbar<br /> |21&quot; Hg / 711 mbar<br /> |21&quot; Hg / 711 mbar<br /> |-<br /> |Full Load Capacity<br /> |10,000 lb / 4535 kg<br /> |10,000 lb / 4535 kg<br /> |10,000 lb / 4535 kg<br /> |-<br /> |Weight (Empty)<br /> |8,000 lb / 3629 kg<br /> |8,300 lb / 3765 kg<br /> |8,600 lb / 3901 kg<br /> |-<br /> |Total Compartment Rollers / Powered<br /> |11/5<br /> |11/5<br /> |11/5<br /> |-<br /> |Guide Track<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |-<br /> |Overall Dimensions (L x W x H)<br /> |156.5&quot; x 72&quot; x 158.188&quot;<br /> <br /> 3975 mm x 1829 mm x 4018 mm<br /> |180.5&quot; x 72&quot; x 158.188&quot;<br /> <br /> 4585 mm x 1829 mm x 4018 mm<br /> |192.5&quot; x 72&quot; x 160.688&quot;<br /> <br /> 4890 mm x 1829 mm x 4081 mm<br /> |-<br /> |Vacuum Arm Reach<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |-<br /> |Vacuum Arm Reach (Hydraulic Extension)<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |-<br /> |Magnet Arm Reach (Hydraulic Extension) Truck Side<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |-<br /> |Wheel Base<br /> |98&quot; / 2489 mm<br /> |122&quot; / 3099 mm<br /> |134&quot; / 3404 mm<br /> |-<br /> |Drive Wheel Center Line<br /> |51&quot; / 1295 mm<br /> |51&quot; / 1295 mm<br /> |51&quot; / 1295 mm<br /> |-<br /> |Battery Compartment Width<br /> |24&quot; / 610 mm<br /> |36&quot; / 915 mm<br /> |42&quot; / 1067 mm<br /> |-<br /> |Maximum Battery Dimensions<br /> <br /> (L x W x H)<br /> |48&quot; x 23&quot; x 34&quot;<br /> <br /> 1219 mm x 584 mm x 864 mm<br /> |48&quot; x 35&quot; x 34&quot;<br /> <br /> 1219 mm x 889 mm x 864 mm<br /> |48&quot; x 41&quot; x 34&quot;<br /> <br /> 1219 mm x 1041 mm x 864 mm<br /> |-<br /> |Minimum Battery Width<br /> <br /> (with vacuum / magnet)<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |-<br /> |Minimum Battery Height<br /> |17.75&quot; / 451 mm<br /> |17.75&quot; / 451 mm<br /> |17.75&quot; / 451 mm<br /> |-<br /> |Ground Clearance<br /> |0.63&quot; / 16 mm<br /> |0.63&quot; / 16 mm<br /> |0.63&quot; / 16 mm<br /> |-<br /> |Roller Height<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |-<br /> ! colspan=&quot;4&quot; |NOTES<br /> |-<br /> | colspan=&quot;4&quot; |''Specifications may vary ± 5% because of temperature, floor considerations, and operator efficiency. Values represented under normal operating conditions.''<br /> |-<br /> | colspan=&quot;4&quot; |''* Varies with battery case thickness and condition.''<br /> |}<br /> <br /> === UNITS WITH 20 HP POWER UNIT USED DECEMBER, 2014 TO PRESENT ===<br /> {| class=&quot;wikitable&quot;<br /> !<br /> !BE-24-2-TS<br /> !BE-36-2-TS<br /> !BE-42-2-TS<br /> |-<br /> |Travel Speed<br /> |0 to 240 ft/min / 0 to 1.22 m/s<br /> |0 to 240 ft/min / 0 to 1.22 m/s<br /> |0 to 240 ft/min / 0 to 1.22 m/s<br /> |-<br /> |Raise - Lower Speed<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |-<br /> |Powered Roller Speed<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |-<br /> |Arm Traverse Speed<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |-<br /> |Arm Rotation Time<br /> |6 s to 8 s<br /> |6 s to 8 s<br /> |6 s to 8 s<br /> |-<br /> |Draw Bar Pull / Vacuum<br /> <br /> (12&quot; / 305 mm Round Cup)<br /> |1,000 lb / 454 kg<br /> |1,000 lb / 454 kg<br /> |1,000 lb / 454 kg<br /> |-<br /> |Draw Bar Pull Magnet*<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |-<br /> |Vacuum Attach Time<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |-<br /> |Vacuum Release Time<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |-<br /> |Input Voltage<br /> |480 V / 3 ph / 60Hz<br /> |480 V / 3 ph / 60Hz<br /> |480 V / 3 ph / 60Hz<br /> |-<br /> |AC Current Draw<br /> |35 A<br /> |35 A<br /> |35 A<br /> |-<br /> |AC Current Draw w/ Electric Drive Option<br /> |42 A<br /> |42 A<br /> |42 A<br /> |-<br /> |Control Circuit Voltage<br /> |120 V ac<br /> |120 V ac<br /> |120 V ac<br /> |-<br /> |Hydraulic Power Unit<br /> |20 hp / 14.9 kW<br /> |20 hp / 14.9 kW<br /> |20 hp / 14.9 kW<br /> |-<br /> |Hydraulic Power Unit w/ Electric Drive Option<br /> |25 hp / 18.7 kW<br /> |25 hp / 18.7 kW<br /> |25 hp / 18.7 kW<br /> |-<br /> |Hydraulic Pump<br /> |22 gal/min / 83 L/min<br /> |22 gal/min / 83 L/min<br /> |22 gal/min / 83 L/min<br /> |-<br /> |Power Unit<br /> |Hydraulic, Variable Displacement<br /> |Hydraulic, Variable Displacement<br /> |Hydraulic, Variable Displacement<br /> |-<br /> |Operating Pressure<br /> |1,500 psi / 103 bar<br /> |1,500 psi / 103 bar<br /> |1,500 psi / 103 bar<br /> |-<br /> |Vacuum Pump<br /> |1/3 hp / 0.25 kW<br /> |1/3 hp / 0.25 kW<br /> |1/3 hp / 0.25 kW<br /> |-<br /> |Vacuum<br /> |21&quot; Hg / 711 mbar<br /> |21&quot; Hg / 711 mbar<br /> |21&quot; Hg / 711 mbar<br /> |-<br /> |Full Load Capacity<br /> |10,000 lb / 4535 kg<br /> |10,000 lb / 4535 kg<br /> |10,000 lb / 4535 kg<br /> |-<br /> |Weight (Empty)<br /> |8,000 lb / 3629 kg<br /> |8,300 lb / 3765 kg<br /> |8,600 lb / 3901 kg<br /> |-<br /> |Total Compartment Rollers / Powered<br /> |11/5<br /> |11/5<br /> |11/5<br /> |-<br /> |Guide Track<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |-<br /> |Overall Dimensions (L x W x H)<br /> |156.5&quot; x 72&quot; x 158.188&quot;<br /> <br /> 3975 mm x 1829 mm x 4018 mm<br /> |180.5&quot; x 72&quot; x 158.188&quot;<br /> <br /> 4585 mm x 1829 mm x 4018 mm<br /> |192.5&quot; x 72&quot; x 160.688&quot;<br /> <br /> 4890 mm x 1829 mm x 4081 mm<br /> |-<br /> |Vacuum Arm Reach<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |-<br /> |Vacuum Arm Reach (Hydraulic Extension)<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |-<br /> |Magnet Arm Reach (Hydraulic Extension) Truck Side<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |-<br /> |Wheel Base<br /> |98&quot; / 2489 mm<br /> |122&quot; / 3099 mm<br /> |134&quot; / 3404 mm<br /> |-<br /> |Drive Wheel Center Line<br /> |51&quot; / 1295 mm<br /> |51&quot; / 1295 mm<br /> |51&quot; / 1295 mm<br /> |-<br /> |Battery Compartment Width<br /> |24&quot; / 610 mm<br /> |36&quot; / 915 mm<br /> |42&quot; / 1067 mm<br /> |-<br /> |Maximum Battery Dimensions<br /> <br /> (L x W x H)<br /> |48&quot; x 23&quot; x 34&quot;<br /> <br /> 1219 mm x 584 mm x 864 mm<br /> |48&quot; x 35&quot; x 34&quot;<br /> <br /> 1219 mm x 889 mm x 864 mm<br /> |48&quot; x 41&quot; x 34&quot;<br /> <br /> 1219 mm x 1041 mm x 864 mm<br /> |-<br /> |Minimum Battery Width<br /> <br /> (with vacuum / magnet)<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |-<br /> |Minimum Battery Height<br /> |17.75&quot; / 451 mm<br /> |17.75&quot; / 451 mm<br /> |17.75&quot; / 451 mm<br /> |-<br /> |Ground Clearance<br /> |0.63&quot; / 16 mm<br /> |0.63&quot; / 16 mm<br /> |0.63&quot; / 16 mm<br /> |-<br /> |Roller Height<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |-<br /> ! colspan=&quot;4&quot; |NOTES<br /> |-<br /> | colspan=&quot;4&quot; |''Specifications may vary ± 5% because of temperature, floor considerations, and operator efficiency. Values represented under normal operating conditions.''<br /> |-<br /> | colspan=&quot;4&quot; |''* Varies with battery case thickness and condition.''<br /> |}<br /> ==&lt;big&gt;Pre-Installation Check&lt;/big&gt;==<br /> ===&lt;big&gt;&lt;u&gt;Floor Conditions&lt;/u&gt;&lt;/big&gt;===<br /> The floor is the single most critical area of the battery room.  A bad floor can cause significant issues with the installation as well as downtime and maintenance problems with the extractor.  The floor should be verified as to its minimum thickness and strength with user.  As noted on the drawing, the specific requirement of flatness for your particular type of system is listed. Below is a chart stating floor requirements.  If possible, especially on double stack and higher systems, a digital level should be used to shoot the grade for compliance with the specification.  The floor should also be inspected for severe cracks or excessively wide expansion joints in the travel path of the machine.  If floor drains are present, they must not have a grade to the opening that encroaches into the travel path. <br /> <br /> F-min is a rating method used to evaluate the flatness and levelness of a floor designated as &quot;defined travel path&quot;.  For example, an F-min rating of 60 means that there is no more than .129&quot; of variation in the transverse axis (wheels left to right) and .287&quot; variation in the longitudinal axis (front to back) on the equipment.<br /> <br /> To avoid potential damage to drive wheel assemblies, guide track, structural components, guide rollers  and issues with the inner frame equalization the &quot;defined travel path&quot; of the Battery Extractor should meet or exceed the recommended F-min specification. See chart below for the model specifications.<br /> {| class=&quot;wikitable&quot;<br /> !Model<br /> !F-Min<br /> !+/- Longitudinal<br /> !+/- Transverse<br /> !Slope Defect<br /> |-<br /> |SL, DS<br /> |40<br /> |.287&quot;<br /> |.192&quot;<br /> |.096&quot;<br /> |-<br /> |TS<br /> |60<br /> |.186&quot;<br /> |.129&quot;<br /> |.066&quot;<br /> |-<br /> |QS<br /> |85<br /> |.131&quot;<br /> |.091&quot;<br /> |.047&quot;<br /> |}[[File:IOP-400 BE-SL&amp;DS (10-23) Floor Conditions Pre-Installation Check.png|alt=BE-TS Floor Conditions Pre-Installation Check|frameless|500x500px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Floor_Conditions_Pre-Installation_Check.png]]<br /> ==&lt;big&gt;Operating Controls &amp; Instructions&lt;/big&gt;==<br /> <br /> === &lt;big&gt;&lt;u&gt;Operator Console&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Operator Console.png|alt=BE-TS Operator Console|frameless|1080x1080px]]<br /> <br /> '''''NOTE:''' Safety devices for the machine and the machine operating area SHALL NOT be rendered inoperable or misused.'' <br /> <br /> ''Typical BE-TS operator console shown above. Position of optional controls may vary from that shown depending on age of unit and/or combination of optional controls present.''<br /> <br /> ''HMI display standard on units shipped after February, 2020 for Industrial Internet of Things (IIoT) package.''<br /> <br /> ==== &lt;u&gt;&lt;big&gt;Safety Features&lt;/big&gt;&lt;/u&gt; ====<br /> &lt;u&gt;Key Switch&lt;/u&gt; – Located on the dash (see above).  Primary on/off switch to prevent unauthorized personnel from operating the BE.<br /> <br /> &lt;u&gt;Emergency Stop&lt;/u&gt; – Located on the dash (see above). Will stop all functions immediately, locking all hydraulics in place. To use, press down on the red button. The machine key must be used to reset the emergency stop.<br /> <br /> &lt;u&gt;Foot Switch&lt;/u&gt; – Must be depressed to operate the BE.  Stepping off the foot switch will stop all functions immediately, locking all hydraulics in place.  To resume use, depress the foot switch.<br /> <br /> &lt;u&gt;Gate Switch&lt;/u&gt; – The gate must be fully closed for the BE to operate.<br /> <br /> &lt;u&gt;Extractor Arm Switch&lt;/u&gt; – Does not permit the machine to move forward or backward unless the extractor arm is located in the center of the carriage between the indicating arrows located on the arm guard.<br /> <br /> &lt;u&gt;Powered Roller Cutout (PRC-1 or PRC-2) ''(if equipped)''&lt;/u&gt; – Disengages the powered roller function when the photo eye positioned on the edge of the BE battery compartment is disrupted by a battery, requiring additional input from the operator. Pressing the &quot;Power Roller Cutout&quot; override button (see above) on the dash will resume  powered roller operation when loading or unloading batteries from the BE carriage.<br /> <br /> &lt;u&gt;Horn ''(If equipped)''&lt;/u&gt; – Button located on the dash (see above).  Used to alert personnel before moving the BE.<br /> <br /> &lt;u&gt;Strobe Light ''(If equipped)''&lt;/u&gt; – Located on a vertical stanchion mounted to the right rear of the operator compartment. For units equipped with optional overhead guard (OHG), the beacon is located above of the operator compartment.  Beacon automatically flashes when the BE is switched on to visually notify the BE is in use.<br /> <br /> &lt;u&gt;Audible Alarm ''(if equipped)''&lt;/u&gt; – Mounted in the same location as the Strobe Light.  Automatically sounds when the BE is switched on to notify personnel that the BE is in use.<br /> <br /> &lt;u&gt;Blue Light ''(if equipped)''&lt;/u&gt; - Mounted at an elevated position on either end of the extractor which project a bright, highly concentrated blue beam pattern on the ground visually alerting personnel to the direction the extractor is moving.<br /> <br /> === &lt;big&gt;&lt;u&gt;Operation Overview&lt;/u&gt;&lt;/big&gt; ===<br /> <br /> * All operators should be familiar with the operator console of the extractor before performing any battery changes.  The controls of the console are simple and well marked.  It consists of six, manually operated, hydraulic control valves and a three position selector switch which controls the left and right vacuum cups (or optional magnets).<br /> * The operator shall make certain there are no persons or obstacles in the extractor path prior to traveling forward or reverse.<br /> * All manual valves are moved in the direction of the function travel which it controls with exception of the lift/lower valve, which is pulled toward the operator for &quot;up&quot; and pushed away for &quot;down.&quot;<br /> * In the event of any failure or malfunction, step off the dead-man switch or press the E-stop button and all functions will stop immediately, locking all hydraulics in place.<br /> * The extractor arm must be in the center of the carriage or the unit will not travel forward or reverse.<br /> * To ensure smooth operation, all valve movements should be made in a slow, deliberate motion.<br /> * Only one key should be provided to operate the extractor.<br /> * When leaving the machine, the operator shall turn off the key switch, remove the key and logout out of the IIoT (if equipped) to prevent unauthorized use<br /> * Ensure all the batteries and cables are properly stored in the battery stands prior to moving the BE.<br /> * The BE is designed to carry only one battery in each compartment on the carriage.<br /> * When loading the BE, position the batteries in the center of the compartments on the powered rollers to prevent any battery movement when transporting.<br /> * Ensure there are no projections outside of the carriage before moving the BE.<br /> <br /> === &lt;u&gt;&lt;big&gt;Operating Instructions&lt;/big&gt;&lt;/u&gt; ===<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Pre-Change Out Preparation&lt;/u&gt;&lt;/big&gt; ====<br /> 1. Position lift truck for change out in designated area.<br /> <br /> 2. Remove all battery restraints and disconnect battery cables following manufacturers guidelines.  (Be sure to position battery cables so as not to be damaged by the battery during change out.)<br /> <br /> 3. Board battery extractor and close safety gate.  (Gate must be fully closed or unit will not operate.)<br /> <br /> 4. Turn key switch to &quot;ON&quot; position. <br /> <br /> 5. Log in on the HMI display (if equipped with BE-IIoT package).<br /> <br /> 6. Depress foot pedal.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Discharged Battery Removal&lt;/u&gt;&lt;/big&gt; ====<br /> 1. Move extractor forward or reverse to position center of empty compartment with center of lift truck battery compartment. (Lead roller of extractor is equipped with a centering groove.  Users may find it beneficial to mark center of lift truck compartment to aid in alignment.)<br /> <br /> 2. Align extractor's roller compartment height with lift truck's battery compartment.<br /> <br /> 3. Rotate extractor arm into battery compartment aligned in Step 2.<br /> <br /> 4. Move extractor arm toward battery until vacuum cup/magnet contacts battery.<br /> <br /> [[File:NOTICE-warn.png|alt=NOTICE|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:NOTICE-warn.png]] '''DO NOT force cup/magnet into battery after initial contact with battery is made.'''<br /> <br /> 5. Energize vacuum/magnet by turning selector switch to proper direction, left or right.<br /> <br /> 6. Move extractor arm away from lift truck toward center of extractor roller bed, removing discharged battery.  (Battery should be pulled past first three idler rollers onto first or second powered roller.)<br /> <br /> 7. Turn off vacuum/magnet and move extractor arm away from battery 1&quot; to 2&quot;.<br /> <br /> 8. Rotate extractor arm out of battery compartment into opposite compartment (if empty) and center arm in carriage.<br /> <br /> 9. Move battery into center of compartment using powered rollers.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Charged Battery Retrieval&lt;/u&gt;&lt;/big&gt; ====<br /> 1. Locate charged battery for appropriate type of lift truck being changed.<br /> <br /> 2. Raise battery extractor roller compartment to proper level to gain access as needed to disconnect desired battery from its charger and disengage battery safety stop.<br /> <br /> [[File:WARNING-warn.png|alt=WARNING|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:WARNING-warn.png]] '''ALWAYS be sure charging has been completed and charger is not still charging battery. Dangerous sparking/arcing can occur if battery is unplugged from charger while charging.'''<br /> <br /> 3. Move extractor to appropriate rack position and align empty roller compartment with the center of the battery storage rack compartment.  ''(The battery safety stop of each compartment is the center of that compartment and should be used for alignment with the groove in the lead roller of the battery extractor compartment.'') <br /> <br /> 4. Rotate arm into empty compartment (if not already positioned there.)<br /> <br /> 5. Move extractor arm toward battery until vacuum cup/magnet contacts battery.<br /> <br /> 6. Energize vacuum cup/magnet by turning selector switch to proper direction, left or right.<br /> <br /> [[File:NOTICE-warn.png|alt=NOTICE|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:NOTICE-warn.png]] '''DO NOT force cup/magnet into battery after initial contact with battery is made.'''<br /> <br /> 7. Move extractor arm away from battery rack toward center of extractor roller bed, removing charged battery.  (Battery should be pulled past first three idler rollers onto first or second powered roller.)<br /> <br /> 8. Turn off vacuum/magnet and move extractor arm away from battery 1&quot; to 2&quot;.<br /> <br /> 9. Rotate extractor arm out of battery compartment into fully vertical position.<br /> <br /> 10. Move battery into center of compartment using powered rollers.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Discharged Battery Return&lt;/u&gt;&lt;/big&gt; ====<br /> 1. If required, adjust extractor compartment height to battery rack level with open battery compartment.  Drive extractor to align roller compartment containing discharged battery with open battery compartment.<br /> <br /> 2. Return discharged battery to battery rack using powered rollers.<br /> <br /> '''''NOTE:''''' ''In most instances, batteries can be deposited into battery racks in one motion using only powered rollers.  When this does not work, the battery may need slight assistance from extractor arm.  To do this, rotate arm into compartment such as one would if removing battery from rack.  If extractor is vacuum equipped, position top edge of cup slightly higher than edge of battery (or over lifting eye if so equipped) to prevent cup from adhering to battery - No vacuum/magnet is necessary for pushing. DO NOT activate vacuum/magnet switch.  Slowly push battery into rack until fully into compartment.''<br /> <br /> 3. Engage battery safety stop and connect battery to charger as required.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Charged Battery Installation&lt;/u&gt;&lt;/big&gt; ====<br /> 1. Lower extractor to fully lowered position.<br /> <br /> 2. Drive extractor back to lift truck and align roller compartment containing charged battery as performed in steps 1 and 2 of &quot;Discharged Battery Removal&quot;.<br /> <br /> 3. Move charged battery toward lift truck compartment by using powered rollers, verifying precise battery alignment.<br /> <br /> [[File:NOTICE-warn.png|alt=NOTICE|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:NOTICE-warn.png]] '''Many batteries are a tight fit into lift truck battery compartments. Care MUST be taken to ensure alignment is precise to avoid damage to battery, lift truck, and/or battery extractor.'''<br /> <br /> 4. Adjust extractor vertically as well as horizontally, if needed<br /> <br /> 5. Insert battery into lift truck as far as possible using only the powered rollers.<br /> <br /> 6. Rotate extractor arm into compartment and SLOWLY push battery into lift truck.  (Be sure to watch battery cables for interference.)<br /> <br /> 7. Return extractor arm to center of roller bed and lower extractor to fully lowered position.  Drive extractor out of immediate area.<br /> <br /> 8. Turn off key switch, remove key from switch, log out on the HMI display (if equipped with BE-IIoT package) and carefully exit extractor.<br /> <br /> 9. Secure newly installed battery in lift truck and reconnect battery cables.<br /> <br /> 10. Return lift truck to service<br /> {|<br /> ![[File:Caution-Warning.png|alt=CAUTION|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:Caution-Warning.png]]<br /> |'''DO NOT drive the BE into the travel path end stops. The end stops are designed to prevent the BE from accidentally traveling beyond its designated travel path. Driving the BE into the end stops will cause the BE to stop suddenly, possibly causing damage to the end stop, the BE and/or personal injury.'''<br /> |}<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Optional Powered Roller Cutout Operation&lt;/u&gt;&lt;/big&gt; ====<br /> Units equipped with optional Powered Roller Cutout, the powered roller override button must be depressed in addition to actuating the hydraulic valve when a battery disrupts the photo eye(s) at the edge of the battery compartments while using the powered rollers to transfer batteries on and off of the battery extractor.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;IIoT Equipped Units&lt;/u&gt;&lt;/big&gt; ====<br /> Units shipped after February, 2020 are equipped with BE-IIoT (Industrial Internet of Things) package. Operators must log in to the BE-IIoT system using the HMI (Human Machine Interface) display located on the dashboard to operate the extractor.<br /> <br /> When finished operating the extractor, the operator should log out of the BE-IIoT to prevent unauthorized access and/or operation of the extractor.<br /> <br /> == &lt;big&gt;Manual Unloading&lt;/big&gt; ==<br /> '''Lockout/tagout and de-energize all equipment prior to manually unloading any battery.'''<br /> <br /> In the event of power loss or an operational malfunction of the BE not allowing a battery to be unloaded using normal operating procedures, it is recommended a battery be removed from the BE using certified and approved vertical extraction methods and devices.<br /> {|<br /> |[[File:DANGER-warn.png|alt=DANGER|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:DANGER-warn.png]]<br /> |'''Read, understand and observe all safety warnings and procedures related to the vertical extraction device(s) being used.'''<br /> |}<br /> Should the status of the BE not allow for safe vertical extraction (due to position in the battery aisle or level of the inner carriage), only repairs required to safely maneuver the BE to a position allowing for safe vertical extraction should be made.  Once any batteries are safely unloaded, any remaining repairs can be made.<br /> {|<br /> |[[File:DANGER-warn.png|alt=DANGER|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:DANGER-warn.png]]<br /> |'''Extreme care should be taken when working under or around equipment supporting elevated loads. Unexpected movement of the equipment could cause the load and/or equipment to fall. ALWAYS be sure devices of adequate size and strength are in place to prevent any personnel working under the elevated load from being crushed. Serious personal injury or death will occur.'''<br /> |}<br /> <br /> == &lt;big&gt;Spare Parts List&lt;/big&gt; ==<br /> Use only BHS approved replacement parts.<br /> <br /> Refer to the appropriate Spare Parts Kit (vacuum equipped units - Pt# BE-SPKV-TS, magnet equipped units - Pt# BE-SPKM-TS) for the list of items recommended by BHS to have on hand for BE-TS models to minimize any downtime due to minor breakdowns that may occur under normal operating conditions.<br /> <br /> BHS offers many replacement parts kits containing relevant or related parts when replacing certain individual parts or replacing any obsolete / upgraded parts.<br /> <br /> BHS also offers a supplement hose kit (Pt# 80342003) which contains an assortment of hoses allowing any hose on the extractor to be replaced immediately with a temporary hose of equal length or longer. After the extractor is back up and running, the failed hose can be taken to have an exact replacement made. Once the new hose is made and installed, the temporary hose can be returned to the kit for future use.<br /> <br /> Go to [[www.bhs1.com]] and click &quot;Parts&quot; for all the latest parts kits and corresponding installation instructions (if applicable).<br /> <br /> BHS recommends that a full maintenance inspection report similar to the one provided be done at least once a month.<br /> <br /> Any parts found to be excessively worn or damaged should promptly be replaced unless said parts pose a safety risk to the operator and/or extractor, in which case the unit should be removed from service until the problem(s) are remedied (See<br /> <br /> Operator's Daily Checklist.)<br /> <br /> ''Note: Spare parts kits contain parts for the most current machine design/configuration. Due to continuous design and manufacturing updates and improvements, not all the parts in the spare parts kits may be compatible with older units. Consult factory when ordering spare or replacement parts for existing units in the field to ensure part compatibility.''<br /> <br /> = &lt;big&gt;Parts Sections&lt;/big&gt; =<br /> <br /> == &lt;big&gt;Chassis&lt;/big&gt; ==<br /> <br /> === &lt;big&gt;&lt;u&gt;Equalization Components&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Equalization Components.png|alt=BE-TS Chassis Equalization|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PT0222-1<br /> |LINK-CONNECTING-#60<br /> |<br /> |<br /> |8<br /> |-<br /> |2<br /> |HW0017<br /> |NUT-HEX-3/4-10<br /> |<br /> |<br /> |8<br /> |-<br /> |3<br /> |HW0115<br /> |WASHER-LOCK-3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |43097001<br /> |STUD-ANCHOR-5&quot;<br /> |<br /> |''Upper''<br /> |4<br /> |-<br /> |5<br /> |HW0020<br /> |NUT-JAM-3/4-10<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43097002<br /> |STUD-ANCHOR-2&quot;<br /> |<br /> |''Lower''<br /> |4<br /> |-<br /> |7<br /> |00158001-14<br /> |CHAIN-ROLLER-#60<br /> |<br /> |<br /> |4<br /> |}<br /> [[File:BE-TS Equalization Components - 1.0.2.png|alt=BE-TS Chassis Equalization 2|frameless|575x575px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PT0416<br /> |COLLAR-SHAFT-1 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |2<br /> |43097006<br /> |KEY-3/8&quot; X 2 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |PT0224<br /> |SPROCKET-60B12 X 1 1/2&quot;<br /> |<br /> |''Keyed in line''<br /> |8<br /> |-<br /> |4<br /> |PT0405<br /> |FLANGE BEARING-2 BOLT-1 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1 1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |6<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> | rowspan=&quot;4&quot; |7<br /> |43127001<br /> |SHAFT-EQUALIZATION-81.75&quot;<br /> |<br /> |''BE-24-2-TS''<br /> |2<br /> |-<br /> |43327001<br /> |SHAFT-EQUALIZATION-105.75&quot;<br /> |<br /> |''BE-36-2-TS''<br /> |2<br /> |-<br /> |44327001<br /> |SHAFT-EQUALIZATION-117.75&quot;<br /> |<br /> |''BE-42-2-TS''<br /> |2<br /> |-<br /> |44527001<br /> |SHAFT-EQUALIZATION-75.75&quot;<br /> |<br /> |''BE-42-1-TS''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |8<br /> |PT0503<br /> |BEARING-FLANGED LOAD-2 1/4&quot;<br /> |<br /> |''Used after December 2003''<br /> |8<br /> |-<br /> |43026001<br /> |BEARING-FLANGED LOAD-2 1/4&quot; ''(MACHINED)''<br /> |<br /> |''Used prior to December 2003''<br /> |8<br /> |-<br /> |9<br /> |HW0025<br /> |NUT-JAM-7/8-14<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0117<br /> |WASHER-LOCK-7/8&quot; ''(NOT SHOWN)''<br /> |<br /> |''Used prior to August 2002''<br /> |8<br /> |}<br /> <br /> === &lt;u&gt;'''&lt;big&gt;Bridge &amp; Cross Bar&lt;/big&gt;'''&lt;/u&gt; ===<br /> [[File:BE-TS Bridge and Cross Bar.png|alt=BE-TS Bridge and Cross Bar|frameless|524x524px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1 1/4&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |2<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |20<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |20<br /> |-<br /> |4<br /> |HW0515<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |''Fully Threaded''<br /> |8<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> === &lt;u&gt;'''&lt;big&gt;Lift Cylinder Connections&lt;/big&gt;'''&lt;/u&gt; ===<br /> [[File:BE-TS Lift Cylinder Connections.png|alt=BE-TS Lift Cylinder Connections|frameless|589x589px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |00158001-13<br /> |CHAIN-ROLLER-#80<br /> |<br /> |<br /> |4<br /> |-<br /> |2<br /> |HW0014<br /> |NUT-HEX-1-8<br /> |<br /> |<br /> |8<br /> |-<br /> |3<br /> |43897002<br /> |STUD-LIFT-INNER FRAME<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |PT0204<br /> |LINK-CONNECTING-#80<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |43897001<br /> |STUD-LIFT-OUTER FRAME<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43815018<br /> |BRACKET-CYLINDER SUPPORT<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |SS0761<br /> |U-BOLT-CYLINDER MOUNTING<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |12<br /> |-<br /> |9<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |10<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |8<br /> |-<br /> | rowspan=&quot;2&quot; |11<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |<br /> |''Idler caster end of unit'' <br /> |2<br /> |-<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |''Drive wheel end of unit'' <br /> |2<br /> |-<br /> |12<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |14<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |43822002<br /> |CLEVIS ASSEMBLY<br /> |<br /> |''Sold as assembly only''<br /> |4<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Guidance Arm&lt;/big&gt;&lt;/u&gt;''' ===<br /> [[File:BE-TS Guidance Arm.png|alt=BE-TS Guidance Arm|frameless|562x562px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> ! colspan=&quot;2&quot; |NO. REQ<br /> |-<br /> |1<br /> |43015011<br /> |GUIDE ARM WELDMENT, 2 ROLLER<br /> |<br /> |<br /> |2<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |2<br /> |43017025<br /> |SPACER-GUIDE ARM<br /> |<br /> |''† 1/2&quot; thick''<br /> |4<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |3<br /> |41215204<br /> |GUIDE ARM WELDMENT, 4 ROLLER<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |2<br /> |-<br /> |4<br /> |41217274<br /> |SPACER-GUIDE ARM<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |4<br /> |-<br /> |5<br /> |43012007<br /> |CAM ROLLER-1 3/4&quot;<br /> |<br /> |<br /> |4<br /> |8<br /> |-<br /> |6<br /> |HW0115<br /> |WASHER-LOCK-3/4&quot;<br /> |<br /> |<br /> |4<br /> |8<br /> |-<br /> |7<br /> |HW0011<br /> |NUT-HEX-3/4-16<br /> |<br /> |<br /> |4<br /> |8<br /> |-<br /> |8<br /> |HW0509<br /> |BOLT-HHCS-1/2-13 X 4-1/2&quot;<br /> |<br /> |<br /> |4<br /> |6<br /> |-<br /> |9<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |6<br /> |-<br /> |10<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |4<br /> |6<br /> |-<br /> |11<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |4<br /> |6<br /> |-<br /> |12<br /> |41215234<br /> |GUIDE ARM WELDMENT (POLY)<br /> |<br /> |<br /> |2<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |13<br /> |41217317<br /> |POLY SLIDE MOUNTING BLOCK<br /> |<br /> |<br /> |4<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |14<br /> |41217318<br /> |POLY SLIDE<br /> |<br /> |<br /> |4<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |15<br /> |HW0501<br /> |BOLT-HHCS-1/2-13 X 1&quot;<br /> |<br /> |<br /> |12<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |16<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |12<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |17<br /> |91253A546<br /> |BOLT FHSCS-1/4-20 X 1-1/2&quot;<br /> |<br /> |<br /> |8<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |18<br /> |HW0003<br /> |NUT-NILN-1/4-20<br /> |<br /> |<br /> |8<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> ! colspan=&quot;7&quot; |NOTES<br /> |-<br /> | colspan=&quot;7&quot; |''† Older units equipped with (1) 1&quot; thick spacer per guide arm bracket.'' <br /> |-<br /> | colspan=&quot;7&quot; |''†† Multiple styles of guide arms have been utilized on extractors. Refer to the parts diagrams for correct replacement parts.'' <br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Roller Bed Componenets&lt;/big&gt;&lt;/u&gt;''' ===<br /> ==== '''&lt;big&gt;''Idler Rollers''&lt;/big&gt;''' ====<br /> [[File:BE-TS Idler Rollers.png|alt=BE-TS Idler Rollers|frameless|746x746px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;3&quot; |1<br /> |43182001<br /> |LEAD ROLLER ASSEMBLY-24&quot;<br /> |<br /> |''With alignment groove''<br /> |4<br /> |-<br /> |43382001<br /> |LEAD ROLLER ASSEMBLY-36&quot;<br /> |<br /> |''With alignment groove''<br /> |4<br /> |-<br /> |43482001<br /> |LEAD ROLLER ASSEMBLY-42&quot;<br /> |<br /> |''With alignment groove''<br /> |4<br /> |-<br /> | rowspan=&quot;3&quot; |2<br /> |43182002<br /> |IDLER ROLLER ASSEMBLY-24&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |43382002<br /> |IDLER ROLLER ASSEMBLY-36&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |43482002<br /> |IDLER ROLLER ASSEMBLY-42&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> | rowspan=&quot;3&quot; |3<br /> |43187002<br /> |SHAFT-HEX-.75&quot; X 25.75&quot;<br /> |<br /> |''24&quot; compartments''<br /> |8<br /> |-<br /> |43387002<br /> |SHAFT-HEX-.75&quot; X 37.75&quot;<br /> |<br /> |''36&quot; compartments''<br /> |8<br /> |-<br /> |43487002<br /> |SHAFT-HEX-.75&quot; X 43.75&quot;<br /> |<br /> |''42&quot; compartments''<br /> |8<br /> |-<br /> | rowspan=&quot;3&quot; |4<br /> |43187003<br /> |SHAFT-HEX-.75&quot; X 27.5&quot;<br /> |<br /> |''24&quot; compartments''<br /> |4<br /> |-<br /> |43387003<br /> |SHAFT-HEX-.75&quot; X 39.5&quot;<br /> |<br /> |''36&quot; compartments''<br /> |4<br /> |-<br /> |43487003<br /> |SHAFT-HEX-.75&quot; X 45.5&quot;<br /> |<br /> |''42&quot; compartments''<br /> |4<br /> |-<br /> |5<br /> |HW1058<br /> |PIN-HITCH<br /> |<br /> |<br /> |24<br /> |}<br /> '''&lt;big&gt;''Powered Rollers''&lt;/big&gt;'''<br /> <br /> [[File:BE-TS Powered Rollers.png|alt=BE-TS Powered Rollers|frameless|546x546px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;3&quot; |1<br /> |43182003<br /> |POWERED ROLLER-24&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |43382003<br /> |POWERED ROLLER-36&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |43485003<br /> |POWERED ROLLER-42&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |2<br /> |43087001<br /> |JOURNAL-POWERED ROLLER<br /> |<br /> |<br /> |10<br /> |-<br /> |3<br /> |PT0404<br /> |FLANGE BEARING-3-BOLT-1&quot;<br /> |<br /> |<br /> |20<br /> |-<br /> |4<br /> |HW0321<br /> |BOLT-HHCS-5/16-18 X 1 1/4&quot;<br /> |<br /> |<br /> |60<br /> |-<br /> |5<br /> |HW0105<br /> |WASHER-LOCK-5/16&quot;<br /> |<br /> |<br /> |60<br /> |-<br /> |6<br /> |HW0004<br /> |NUT-HEX-5/16-18<br /> |<br /> |<br /> |60<br /> |-<br /> |7<br /> |PT0033<br /> |SPROCKET-35B18 X 1&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |8<br /> |00197028<br /> |KEY-1/4&quot; X 1 1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |00158001-16<br /> |CHAIN-ROLLER-#35<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |PT0031<br /> |LINK-CONNECTING-#35<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |PT0418<br /> |COLLAR-SHAFT-1&quot;<br /> |<br /> |<br /> |10<br /> |}<br /> [[File:BE-TS Powered Rollers Detail A.png|alt=BE-TS Powered Rollers Detail A|frameless|542x542px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0120<br /> |MOTOR-HYDRAULIC-160CC<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW1071<br /> |KEY-WOODRUFF-#808 STD<br /> |<br /> |''Supplied with Item 1''<br /> |A/R<br /> |-<br /> |3<br /> |H1544<br /> |ADAPTER-#6 JICM X #10 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |18<br /> |-<br /> |5<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |18<br /> |-<br /> |6<br /> |43017004<br /> |PLATE-MOTOR MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |PT0302-1<br /> |COUPLING BODY-#40 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |PT0301<br /> |CHAIN-COUPLING-#40<br /> |<br /> |''Includes connecting pin''<br /> |2<br /> |-<br /> |9<br /> |00197026<br /> |KEY-1/4&quot; X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43097003<br /> |KEY-1/4&quot; X 5/8&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Hose Carrier&lt;/big&gt;&lt;/u&gt;''' ===<br /> [[File:BE-TS Hose Carrier.png|alt=BE-TS Hose Carrier|frameless|550x550px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PT0629<br /> |CARRIER TRACK<br /> |<br /> |''81 links required''<br /> |10'<br /> |-<br /> |2<br /> |PT0631<br /> |BRACKET-UPPER MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0212<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0032<br /> |NUT-NILN-#10-24<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |PT0630<br /> |BRACKET-LOWER MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |7<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |43817056-2<br /> |BRACKET-CARRIER TRACK MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |HW0401<br /> |BOLT-HHCS-3/8-16 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |14<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |43817057<br /> |PLATE-CARRIER TRACK SUPPORT<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === &lt;big&gt;'''&lt;u&gt;Cable Retractor&lt;/u&gt;'''&lt;/big&gt; ===<br /> [[File:BE-TS Cable Retractor.png|alt=BE-TS Cable Retractor|frameless|585x585px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |CCR-12HD<br /> |TAKE UP REEL-CARRIER TRACK<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Operator Gate&lt;/big&gt;&lt;/u&gt;''' ===<br /> [[File:BE-TS Discontinued Drop Bar Operator Gate.png|alt=BE-TS Discontinued Drop Bar Operator Gate|frameless|568x568px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43015004<br /> |GATE-OPERATOR<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0407<br /> |BOLT-HHCS-3/8-16 X 2 3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |<br /> |<br /> |1<br /> |}<br /> [[File:BE-TS Operator Gate Continued.png|alt=BE-TS Operator Gate Continued|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43017064-2<br /> |LATCH-SWING GATE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0418<br /> |BOLT-HHCS-3/8-16 X 2 1/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0031<br /> |NUT-LOCK-3/8-16<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |N/A<br /> |HINGE-SPRING<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |5<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |HW1037<br /> |STOP-GATE<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0003<br /> |NUT-NILN-1/4-20<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |N/A<br /> |TORSION SPRING<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |11<br /> |HW0816<br /> |SCREW-HHCS-SELF DRILLING-#10 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |43806001<br /> |ANTI-FATIGUE MAT<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |43017058-2<br /> |THRESHOLD<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |HW0107<br /> |WASHER-LOCK3/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |HW9002<br /> |GAS SPRING<br /> |80292015<br /> |<br /> |1<br /> |-<br /> |19<br /> |43017086-2<br /> |BRACKET-MOUNTING-SPRING<br /> |80292015<br /> |<br /> |2<br /> |-<br /> |20<br /> |HW0815<br /> |SCREW-SELF DRILLING-#12-24 X 1&quot; T-4<br /> |80292015<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Part Discontinued. Spring Hinge and Torsion Spring must be replaced with Gas Spring Kit.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Guarding&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Outer Carriage Guards&lt;/big&gt;''''' ====<br /> <br /> ===== '''''1-Piece Outside Frame Guarding''''' =====<br /> [[File:BE-TS Outside Frame Guard 1-Piece.png|alt=BE-TS Outside Frame Guard 1-Piece|frameless|550x550px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817038<br /> |GUARD-FAR END-TOP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817037<br /> |GUARD-FAR END-MIDDLE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43817035<br /> |GUARD-FAR END-BOTTOM<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |33<br /> |}<br /> <br /> ===== '''''Split Outside Frame Guarding''''' =====<br /> [[File:BE-TS Outside Split Frame Guard.png|alt=BE-TS Outside Split Frame Guard|frameless|562x562px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817103<br /> |GUARD-FAR END-TOP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817102<br /> |GUARD-FAR END-MIDDLE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43817101<br /> |GUARD-FAR END-BOTTOM<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |37<br /> |}<br /> <br /> ==== '''&lt;big&gt;''Inner Carriage Guards''&lt;/big&gt;''' ====<br /> <br /> ===== '''''Inner Carriage Guards (Rotary Actuator)''''' =====<br /> [[File:BE-TS Inner Carriage Guard Rotary.png|alt=BE-TS Inner Carriage Guard (Rotary Actuator Units)|frameless|554x554px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817041-2<br /> |GUARD-FRONT-OPERATOR CONSOLE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817042-2<br /> |GUARD-INNER-FRAME<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |43014006-2<br /> |GUARD-LINEAR DRIVE SCREW<br /> |<br /> |<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |4<br /> |43017010-2<br /> |GUARD-SIDE-ARM CARRIER SHAFT<br /> |<br /> |<br /> |2<br /> |-<br /> |44517002-2<br /> |GUARD-SIDE-ARM CARRIER SHAFT<br /> |<br /> |''† Single compartment units only''<br /> |1<br /> |-<br /> |5<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |34<br /> |-<br /> |6<br /> |43017009-2<br /> |BRACKET-SCREW GUARD MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Single Compartment Guard replaces standard, Far Side Arm Carrier Shaft Guard.'' <br /> |}<br /> '''''Inner Carriage Guards (Helical Actuator)'''''<br /> <br /> [[File:BE-TS Inner Carriage Guard Helical Actuator.png|alt=BE-TS Inner Carriage Guard (Helical Actuator Units)|frameless|547x547px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817041-2<br /> |GUARD-FRONT-OPERATOR CONSOLE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817042-2<br /> |GUARD-INNER-FRAME<br /> |<br /> |<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |3<br /> |43017081-2<br /> |GUARD-SIDE-ARM CARRIER SHAFT<br /> |<br /> |<br /> |2<br /> |-<br /> |44517003-2<br /> |GUARD-SIDE-ARM CARRIER SHAFT<br /> |<br /> |''† Single compartment units only''<br /> |1<br /> |-<br /> |4<br /> |43017080-2<br /> |BRACKET-SIDE GUARD MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |43017082-3<br /> |MOUNT-CHAIN GUARD-LEAD SCREW<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43017082-4<br /> |MOUNT-CHAIN GUARD-LEAD SCREW<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |43017083-2<br /> |GUARD-CHAIN-LEAD SCREW<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0347<br /> |BOLT-BHSCS-1/4-20 X 3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |28<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Single Compartment Guard replaces standard, Far Side Arm Carrier Shaft Guard.'' <br /> |}<br /> <br /> ==== '''&lt;big&gt;''Dash &amp; Platform Guards''&lt;/big&gt;''' ====<br /> [[File:BE-TS Dash &amp; Platform Guards.png|alt=BE-TS Dash &amp; Platform Guards|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41614004-2<br /> |DASHBOARD-OPERATOR CONSOLE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817040<br /> |KICK PLATE-OPERATOR CONSOLE<br /> |<br /> |''41.5&quot; high''<br /> |1<br /> |-<br /> |3<br /> |43817086-2<br /> |DASHBOARD-OPERATOR CONSOLE<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43817088<br /> |KICK PLATE-OPERATOR CONSOLE<br /> |<br /> |''33.5&quot;'' ''high''<br /> |1<br /> |-<br /> |5<br /> |43817110-2<br /> |FRAME-DASHBOARD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |A/R<br /> |PLATE-DASHBOARD<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |7<br /> |HW0060<br /> |NUT-CLIP-#10-24<br /> |<br /> |<br /> |12<br /> |-<br /> |8<br /> |SS0114<br /> |BHSCS-#10-24 X 1/2&quot;-SST<br /> |<br /> |<br /> |12<br /> |-<br /> |9<br /> |PL0602<br /> |VINYL EDGING<br /> |<br /> |''At Foot Switch (Not shown)'' <br /> |1'<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Consult factory''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Lift Cylinder Guards&lt;/big&gt;''''' ====<br /> [[File:BE-TS Lift Cylinder Guards.png|alt=BE-TS Lift Cylinder Guards|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;2&quot; |1<br /> |43815016<br /> |GUARD-CLEVIS<br /> |<br /> |Operator right / Far left<br /> |2<br /> |-<br /> |43815017<br /> |GUARD-CLEVIS<br /> |<br /> |Operator left / Far right<br /> |2<br /> |-<br /> |2<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Labels &amp; Placards&lt;/big&gt;&lt;/u&gt;''' ===<br /> [[File:BE-TS Labels &amp; Placards Chassis.png|alt=BE-TS Labels &amp; Placards Chassis|frameless|546x546px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |00196616<br /> |LABEL-&quot;NO RIDERS ALLOWED&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |00196210<br /> |LABEL-WARNING-&quot;OPERATION BY AUTHORIZED PERSONNEL ONLY&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43696001<br /> |PLACARD-OFF / ON<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43096018<br /> |PLACARD-RACK LEVEL ASSIST<br /> |<br /> |''† If equipped''<br /> |1<br /> |-<br /> |5<br /> |43096015<br /> |PLACARD-PLATFORM RAISE / LOWER<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43096010<br /> |PLACARD-HORN<br /> |<br /> |''† If equipped''<br /> |1<br /> |-<br /> |7<br /> |43096016<br /> |PLACARD-DRIVE / ARM ROTATION<br /> |<br /> |<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |8<br /> |43096012<br /> |PLACARD-VACUUM OFF / ON<br /> |<br /> |''Vacuum units only''<br /> |1<br /> |-<br /> |43096011<br /> |PLACARD-MAGNET OFF / ON<br /> |<br /> |''Magnet units only (Not shown)''<br /> |1<br /> |-<br /> |9<br /> |43096017<br /> |PLACARD-POWERED ROLLER CUTOUT OVERRIDE<br /> |<br /> |''† If equipped''<br /> |1<br /> |-<br /> |10<br /> |43096013<br /> |PLACARD-POWERED ROLLERS / ARM TRAVERSE<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |00196633<br /> |LABEL-NOTICE-&quot;IN LINE VACUUM FILTER...&quot;<br /> |<br /> |''(1) per side (Vacuum units only)''<br /> |2<br /> |-<br /> |12<br /> |SM-1197<br /> |LABEL-ARM POSITION ARROW<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |00196609<br /> |LABEL-NOTICE-&quot;ARM MUST BE POSITIONED BETWEEN ARROWS...&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |00196602<br /> |LABEL-NOTICE-&quot;LUBRICATION POINTS ON UNDERSIDE&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |00196218<br /> |LABEL-WARNING-&quot;ELECTRICAL VOLTAGE HAZARD&quot;<br /> |<br /> |''Magnet units only''<br /> |1<br /> |-<br /> |16<br /> |00196238<br /> |LABEL-WARNING-&quot;STRONG MAGNETIC<br /> <br /> FIELD/DO NOT USE WITH PACEMAKER&quot;<br /> |<br /> |''†† Magnet units only''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Rack Level Assist (LAI), Horn and Powered Roller Cutout (PRC) are optional features. Not all units are equipped with these options.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Pacemaker Warning Label takes the place of the discontinued, Triangular Magnetic Field Label.''<br /> |}<br /> [[File:BE-TS Labels &amp; Placards Frame.png|alt=BE-TS Labels &amp; Placards Frame|frameless|549x549px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |00196004<br /> |LABEL-CAUTION-&quot;WATCH FOR BATTERY AND CHARGER CABLES IN TRAVEL PATH&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |00196216<br /> |LABEL-WARNING-&quot;CHAIN ENTANGLEMENT<br /> <br /> HAZARD&quot;<br /> |<br /> |''(1) per Clevis Guard'' <br /> |4<br /> |-<br /> |3<br /> |00196622<br /> |LABEL-LIFT POINT<br /> |<br /> |''(2) each end''<br /> |4<br /> |-<br /> |4<br /> |00196700<br /> |DECAL-BHS-24&quot; X 7.875&quot;<br /> |<br /> |''Far end (Not shown)''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |5<br /> |00196630<br /> |LABEL-NOTICE-HYD. OIL SPEC. (AW 68)<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |00196645<br /> |LABEL-NOTICE-HYD. OIL SPEC. (AW 32)<br /> |<br /> |''† See notes'' <br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |† Most units shipped prior to December 2014 require AW 68 Hydraulic Oil. Some units shipped prior to December 2014 shipped with AW 32 for low temperature applications.<br /> |}<br /> <br /> == &lt;big&gt;Extractor Arm&lt;/big&gt; ==<br /> {| class=&quot;wikitable&quot;<br /> !SYMBOL<br /> !DESCRIPTION / NOTICE<br /> !ACTUATOR DIAGRAM<br /> |-<br /> |[[File:IOP-400 BE-SL&amp;DS (10-23) Rotary Actuator Symbol.png|alt=Rotary Actuator Symbol|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Rotary_Actuator_Symbol.png]]<br /> |<br /> ==='''&lt;u&gt;&lt;big&gt;Rotary Actuator Symbol&lt;/big&gt;&lt;/u&gt;'''===<br /> Battery Extractors shipped prior to May 2020 are equipped with Rotary Actuator Extractor Arms. Parts Diagrams Specific to the Rotary Actuator design are indicated with the Rotary Actuator symbol.<br /> |[[File:IOP-400 BE-SL&amp;DS (10-23) Rotary Actuator Extractor Arm.png|alt=BE-TS Rotary Actuator|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Rotary_Actuator_Extractor_Arm.png]]<br /> |-<br /> |[[File:IOP-400 BE-SL&amp;DS (10-23) Helical Actuator Symbol.png|alt=Helical Actuator Symbol|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Helical_Actuator_Symbol.png]]<br /> |<br /> ===&lt;big&gt;'''&lt;u&gt;Helical Actuator Symbol&lt;/u&gt;'''&lt;/big&gt;===<br /> Battery Extractors shipped from May 2020 to Present are equipped with Helical Actuator Extractor Arms. Parts Diagrams Specific to the Rotary Actuator design are indicated with the Helical Actuator Symbol.<br /> |[[File:IOP-400 BE-SL&amp;DS (10-23) Helical Actuator Extractor Arm.png|alt=BE-TS Helical Actuator|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Helical_Actuator_Extractor_Arm.png]]<br /> |}<br /> ===&lt;big&gt;&lt;u&gt;Vacuum Components &amp; Swing Arms&lt;/u&gt;&lt;/big&gt;===<br /> ====''&lt;big&gt;Vacuum Arms (Rotary Actuator)&lt;/big&gt;''====<br /> [[File:BE-TS Vacuum Arms (Rotary Actuator).png|alt=BE-TS Vacuum Arms (Rotary Actuator)|frameless|619x619px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;2&quot; |1<br /> |N/A<br /> |ARM-PUSH/PULL-30&quot;<br /> |<br /> |''&lt;sup&gt;†&lt;/sup&gt; Discontinued''<br /> |1<br /> |-<br /> |N/A<br /> |ARM-PUSH/PULL-36&quot;<br /> |<br /> |''&lt;sup&gt;†&lt;/sup&gt; Discontinued''<br /> |1<br /> |-<br /> |2<br /> |HW0509<br /> |BOLT-HHCS-1/2-13 X 4 1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |P0505<br /> |BUSHING-RED-#6 NPT X #4 FNPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |P0402<br /> |HOSE BARB-1/4 X #4 MNPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0428<br /> |STUD-VACUUM-3/8-16 X 5&quot;<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |9<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |HW-KIT-2<br /> |<br /> |40<br /> |-<br /> |10<br /> |HW1001<br /> |SPRING-3/8&quot;<br /> |HW-KIT-2<br /> |<br /> |24<br /> |-<br /> |11<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |12<br /> |HW0424<br /> |NUT-JAM-3/8-16<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |REF<br /> |43052006<br /> |ADJUSTABLE PUSH/PULL ARM<br /> |<br /> |''Includes Items 13 through 17''<br /> |1<br /> |-<br /> |13<br /> |43057034<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |43055008<br /> |VACUUM CUP MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''&lt;sup&gt;†&lt;/sup&gt; One-piece Arms no longer available. Must replace with Adjustable Arm.''<br /> |}<br /> <br /> ====&lt;big&gt;''Vacuum Cups''&lt;/big&gt;====<br /> [[File:BE-TS Vacuum Cups.png|alt=Vacuum Cups|frameless|563x563px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;4&quot; |A/R<br /> |00162004<br /> |VACUUM CUP-10&quot; 3-PC (STANDARD)<br /> |<br /> |''&lt;sup&gt;†&lt;/sup&gt; Includes Items 1 through 4''<br /> | rowspan=&quot;4&quot; |A/R<br /> |-<br /> |00162003<br /> |VACUUM CUP-12&quot; 3-PC (STANDARD)<br /> |<br /> |''&lt;sup&gt;†&lt;/sup&gt; Includes Items 4 through 7''<br /> |-<br /> |00162007<br /> |VACUUM CUP-10&quot; 3-PC, REINFORCED<br /> |<br /> |''Includes Items 1,3,4 &amp; 8''<br /> |-<br /> |00162005<br /> |VACUUM CUP-12&quot; 3-PC, REINFORCED<br /> |<br /> |''Includes Items 4,5,7 &amp; 9''<br /> |-<br /> |1<br /> |00164006<br /> |CASTING-10&quot; VACUUM CUP<br /> |<br /> | rowspan=&quot;3&quot; |''10&quot; cup only''<br /> |1<br /> |-<br /> |2<br /> |00164004<br /> |SEAL-RUBBER-10&quot;<br /> |<br /> |1<br /> |-<br /> |3<br /> |00165002<br /> |PLATE-FRONT-10&quot;<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0311<br /> |BOLT-FHSCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |00166001<br /> |CASTING-12&quot; VACUUM CUP<br /> |<br /> | rowspan=&quot;3&quot; |''12&quot; cup only''<br /> |1<br /> |-<br /> |6<br /> |00164001<br /> |SEAL-RUBBER-12&quot;<br /> |<br /> |1<br /> |-<br /> |7<br /> |00165001<br /> |PLATE-FRONT-12&quot;<br /> |<br /> |1<br /> |-<br /> |8<br /> |00164007<br /> |SEAL-RUBBER-10&quot;-REINFORCED<br /> |<br /> |<br /> |A/R<br /> |-<br /> |9<br /> |00167003<br /> |SEAL-RUBBER-12&quot;-REINFORCED<br /> |<br /> |<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''&lt;sup&gt;†&lt;/sup&gt; 10&quot; and 12&quot; 1-Piece Cups no longer available. Must replace with 3-Piece Cup. Verify required cup size prior to ordering.''<br /> |}<br /> <br /> ====&lt;big&gt;''Swing Arms (Rotary Actuator)''&lt;/big&gt;====<br /> [[File:BE-TS Swing Arms (Rotary Actuator).png|alt=BE-TS Swing Arms (Rotary Actuator)|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> |ITEM<br /> |BHS PART NUMBER<br /> |DESCRIPTION<br /> |REF. KIT NO.<br /> |NOTES<br /> |NO. REQ<br /> |-<br /> | rowspan=&quot;3&quot; |1<br /> |45055001<br /> |TIE PLATE-SWING ARM<br /> |<br /> |BE-24-2-TS<br /> |1<br /> |-<br /> |45255001<br /> |TIE PLATE-SWING ARM<br /> |<br /> |BE-36-2-TS (NOT SHOWN)<br /> |1<br /> |-<br /> |45355001<br /> |TIE PLATE-SWING ARM<br /> |<br /> |BE-42-2-TS (NOT SHOWN)<br /> |1<br /> |-<br /> |2<br /> |43055004<br /> |SWING ARM-RHS<br /> |†<br /> |NOT SOLD INDIVIDUALLY<br /> |1<br /> |-<br /> |3<br /> |43055002<br /> |SWING ARM-LHS<br /> |†<br /> |NOT SOLD INDIVIDUALLY<br /> |1<br /> |-<br /> |4<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0113<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0010<br /> |NUT-JAM-5/8-11<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |PT0413<br /> |COLLAR-SHAFT-3&quot;<br /> |80252001<br /> |<br /> |2<br /> |-<br /> |8<br /> |43027001<br /> |SHAFT-ROTARY ACTUATOR<br /> |80252001<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW1013<br /> |KEY-3/8&quot; X 12&quot;<br /> |80252001<br /> |<br /> |1<br /> |-<br /> |10<br /> |PT0419<br /> |BEARING-SAE 841-2&quot; I.D., 3&quot; OD, 1/8&quot; THICK<br /> |80252001<br /> |<br /> |3<br /> |-<br /> |11<br /> |43052005<br /> |CAP-BEARING<br /> |<br /> |INCLUDES BEARING<br /> |2<br /> |-<br /> |12<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |13<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |14<br /> |43057014<br /> |STANDOFF-WIRE<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |HW0312<br /> |SCREW-SHSS-1/4-20 X 1&quot;-CUP POINT<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |43057003<br /> |CUSHION-SWING ARM<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |43055001<br /> |STOP-SWING ARM<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |20<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |21<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |H1565<br /> |ADAPTER-45 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |23<br /> |H1600<br /> |ADAPTER-90 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |&lt;sup&gt;†&lt;/sup&gt; ''Included in multiple kits.''<br /> |-<br /> | colspan=&quot;6&quot; |See ''Single Compartment Swing Arm Stop for the the Single Compartment Swing Arm Stop.''<br /> |}<br /> <br /> === '''''Vacuum Swing Arm Stop (Rotary Actuator)''''' ===<br /> [[File:BE-TS Single Compartment Swing Arms (Rotary Actuator).png|alt=BE-TS Single Compartment Swing Arms (Rotary Actuator)|frameless|575x575px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |44555001<br /> |STOP-SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43057003<br /> |CUSHION-SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43057008<br /> |SPACER-SWING ARM STOP<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |}<br /> ====''&lt;big&gt;Vacuum Pump (Rotary Actuator)&lt;/big&gt;''====<br /> [[File:BE-TS Vacuum Pumps (Rotary Actuator).png|alt=BE-TS Vacuum Pumps (Rotary Actuator)|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |P0005<br /> |PUMP-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |P0208<br /> |FILTER-HI FLOW<br /> |<br /> |<br /> |3<br /> |-<br /> |3<br /> |P0503<br /> |NIPPLE-#4 NPT-BRASS<br /> |<br /> |<br /> |3<br /> |-<br /> |4<br /> |P0502<br /> |TEE-#4 FNPT-BRASS<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |P0506<br /> |ELBOW-STR-90 DEG-#4 NPT-BRASS<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |P0402<br /> |HOSE BARB-1/4 X #4 NPTM-BRASS<br /> |<br /> |<br /> |6<br /> |-<br /> |7<br /> |P0207<br /> |VALVE-VACUUM RELEASE<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |P0302<br /> |HOSE-VACUUM-1/4&quot; I.D.<br /> |<br /> |''Two 6&quot; pieces''<br /> |1'<br /> |-<br /> |9<br /> |P0302<br /> |HOSE-VACUUM-1/4&quot; I.D.<br /> |<br /> |''Short Arm side''<br /> |1'<br /> |-<br /> |10<br /> |P0302<br /> |HOSE-VACUUM-1/4&quot; I.D.<br /> |<br /> |''Long Arm side''<br /> |2'<br /> |-<br /> |11<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |HW0212<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |E0624<br /> |CONNECTOR-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |15a<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |''Not shown''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |16<br /> |E0501<br /> |CORD-14-4 SW/SOW<br /> |<br /> |''Withtout Ground Connection in Arm''<br /> | rowspan=&quot;2&quot; |15'<br /> |-<br /> |E0514<br /> |CORD-16-5 SW/SOW<br /> |<br /> |<br /> |-<br /> |17<br /> |43057014<br /> |STANDOFF-CABLE<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |HW0206<br /> |SCREW-RHMS-#10-32 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |19<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |20<br /> |43057021<br /> |PLATE-STIFFENER<br /> |†<br /> |<br /> |2<br /> |-<br /> |21<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |†<br /> |<br /> |12<br /> |-<br /> |22<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |†<br /> |<br /> |12<br /> |-<br /> |23<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |†<br /> |<br /> |12<br /> |-<br /> |24<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |†<br /> |''Not shown''<br /> |24<br /> |-<br /> |25<br /> |P0111<br /> |FILTER-VACUUM-INLINE<br /> |<br /> |''Not shown''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |&lt;sup&gt;†&lt;/sup&gt; ''Included in multiple kits.''<br /> |}<br /> ===&lt;u&gt;&lt;big&gt;Rotary Actuator&lt;/big&gt;&lt;/u&gt;===<br /> [[File:BE-TS Rotary Actuator.png|alt=BE-TS Rotary Actuator|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43046001<br /> |ROTARY ACTUATOR<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |80000002<br /> |ROTARY ACTUATOR BASE ASSEMBLY<br /> |<br /> |''Without Actuator''<br /> |1<br /> |-<br /> |2A<br /> |N/A<br /> |VERTICAL CARRIER PLATE-OUTER<br /> |<br /> |''Included with 80000002''<br /> |2<br /> |-<br /> |2B<br /> |N/A<br /> |VERTICAL CARRIER PLATE-INNER<br /> |<br /> |''Included with 80000002''<br /> |1<br /> |-<br /> |2C<br /> |N/A<br /> |CARRIER BASE PLATE<br /> |<br /> |''Included with 80000002''<br /> |1<br /> |-<br /> |3<br /> |HW1070<br /> |PIN-PULL DOWEL-5/8&quot; X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0508<br /> |BOLT-SHCS-1/2-13 X 3/4&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW1045<br /> |PIN-PULL DOWEL-3/8&quot; X 1 1/2&quot;<br /> |<br /> |''Included with 80000002''<br /> |6<br /> |-<br /> |6<br /> |HW0412<br /> |BOLT-SHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |''Included with 80000002''<br /> |12<br /> |-<br /> |7<br /> |H0010<br /> |FITTING-BULKHEAD-3/4-16 X #4 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 NPTM<br /> |<br /> |<br /> |2<br /> |}<br /> ===&lt;u&gt;&lt;big&gt;Carrier Shafts &amp; Bearings ''(Rotary Actuator)''&lt;/big&gt;&lt;/u&gt;===<br /> [[File:BE-TS Rotary Actuator Carrier Shafts.png|alt=BE-TS Carrier Shafts (Rotary Actuator)|frameless|560x560px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43057045<br /> |CARRIER SHAFT-EXTRACTOR ARM<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |2<br /> |43054007<br /> |BEARING-EXTRACTOR ARM CARRIER<br /> |80252002<br /> |''†† See notes''<br /> |4<br /> |-<br /> |3<br /> |HW0412<br /> |BOLT-SHCS-3/8-16 X 1 1/4&quot;<br /> |80252002<br /> |<br /> |16<br /> |-<br /> |4<br /> |PT0413<br /> |COLLAR-SHAFT-3&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |PT0624<br /> |FITTING-ZERK<br /> |80252002<br /> |''Not shown''<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Vacuum_Extended_Reach_(Rotary_Actuator) Vacuum Extended Reach (Rotary Actuator)] section for Extended Reach equipped units.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Carrier_Shafts_&amp;_Bearings Carrier Shafts &amp; Bearings (Helical Actuator)] section for Helical Actuator equipped units.''<br /> |}<br /> <br /> ===&lt;u&gt;&lt;big&gt;Drive Screw Components ''(Rotary Actuator)''&lt;/big&gt;&lt;/u&gt;===<br /> ====''&lt;big&gt;Drive Nut Assembly (Rotary Actuator)&lt;/big&gt;''====<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Drive Nut Assembly Rotary Actuator.png|alt=BE-SL&amp;DS Drive Nut Assembly Rotary Actuator|frameless|537x537px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Drive_Nut_Assembly_Rotary_Actuator.png]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43054006<br /> |DRIVE NUT ASSEMBLY<br /> |80252003<br /> |&lt;sup&gt;''†''&lt;/sup&gt; ''See notes''<br /> |1<br /> |-<br /> |2<br /> |HW0426<br /> |BOLT-SHCS-3/8-16 X 5 1/2&quot;<br /> |80252003<br /> |&lt;sup&gt;''††''&lt;/sup&gt; ''See notes''<br /> |4<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |80252003<br /> |&lt;sup&gt;''††''&lt;/sup&gt; ''See notes''<br /> |4<br /> |-<br /> |4<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |80252003<br /> |&lt;sup&gt;''††''&lt;/sup&gt; ''See notes''<br /> |4<br /> |-<br /> |5<br /> |PT0624<br /> |FITTING-ZERK<br /> |80252003<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''&lt;sup&gt;†&lt;/sup&gt; See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Drive_Nut_Assembly_(Helical_Actuator) Drive Nut Assembly (Helical Actuator)] section for Helical Actuator equipped units.''<br /> |-<br /> | colspan=&quot;6&quot; |''&lt;sup&gt;††&lt;/sup&gt; It is recommended to replace mounting hardware when replacing Drive Nut Assembly.''<br /> |}<br /> ====''&lt;big&gt;Drive Screw&lt;/big&gt;''====<br /> =====''[Current] Drive Screw Assembly (Frame #'s 374 to Present)''=====<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Drive Screw Rotary Current.png|alt=Current BE-SL &amp; BE-DS Drive Screw (Rotary Actuator)|frameless|531x531px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Drive_Screw_Rotary_Current.png]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43024001<br /> |SCREW-LINEAR DRIVE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |PT0119<br /> |SPROCKET-50B15 X 1 3/16&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43097004<br /> |KEY-1/4 X 7/8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |00158001-15<br /> |CHAIN-ROLLER-#50<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |PT0102<br /> |LINK-CONNECTING-#50<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |PT0406<br /> |FLANGE BEARING-4 BOLT-1 3/16&quot;<br /> |<br /> |''Alloy casting''<br /> |2<br /> |-<br /> |7<br /> |HW0503<br /> |BOLT-HHCS-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |PT0107<br /> |SPROCKET-50B15 X 1&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HC0121<br /> |MOTOR-HYDRAULIC-100CC<br /> |<br /> |''SAE 2-Bolt mount''<br /> |1<br /> |-<br /> |11<br /> |H1605<br /> |ADAPTER-90 DEG-#6 JICM X #10 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW1071<br /> |KEY-WOODRUFF-#808 STD<br /> |<br /> |''Supplied with Item 10''<br /> |A/R<br /> |-<br /> |13<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |14<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |15<br /> |43017007<br /> |PLATE-MOUNTING-SCREW DRIVE MOTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |43057019<br /> |PLATE-COVER<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0415<br /> |BOLT-SHCS-3/8-16 X 3/4&quot;<br /> |<br /> |<br /> |8<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> ! colspan=&quot;6&quot; |ITEMS BELOW ARE REQUIRED FOR REPLACING THE LINEAR DRIVE<br /> <br /> SCREW ON UNITS WITH FRAME #'S OF 373 AND EARLIER<br /> |-<br /> ! colspan=&quot;6&quot; |LINEAR DRIVE SCREW UPDATE KIT<br /> |-<br /> |REF<br /> |80252011<br /> |UPGRADE KIT<br /> |<br /> |<br /> |1<br /> |-<br /> |1<br /> |43024001<br /> |SCREW-LINEAR DRIVE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |PT0119<br /> |SPROCKET-50B15 X 1 3/16&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43097004<br /> |KEY-1/4&quot; X 7/8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |PT0406<br /> |FLANGE BEARING-4 BOLT-1 3/16&quot;<br /> |<br /> |''Alloy casting''<br /> |2<br /> |-<br /> |7<br /> |HW0503<br /> |BOLT-HHCS-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |16<br /> |43057019<br /> |PLATE-COVER<br /> |<br /> |<br /> |2<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |43057022<br /> |SHIM-18GA<br /> |<br /> |''May not be required'' - ''(Not shown)''<br /> |2<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |43057018<br /> |TEMPLATE-BEARING MOUNT PATTERN<br /> |<br /> |''(Not shown)''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |43057020<br /> |SPACER PLATE<br /> |<br /> |''(Not shown)''<br /> |2<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |80000015<br /> |INSTRUCTION DETAIL<br /> |<br /> |''(Not shown)''<br /> |REF<br /> |}<br /> <br /> =====''[Discontinued] Drive Screw Assembly (Frame #'s 373 and Earlier)''=====<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Drive Screw (Rotary Actuator) Discontinued.png|alt=Discontinued BE-SL &amp; BE-DS Drive Screw (Rotary Actuator)|frameless|532x532px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Drive_Screw_(Rotary_Actuator)_Discontinued.png]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |SCREW-LINEAR DRIVE (DISCONTINUED)<br /> |<br /> |''See 80252011 Upgrade Kit''<br /> |1<br /> |-<br /> |2<br /> |PT0118<br /> |SPROCKET-50B12 X 1 3/16&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43097004<br /> |KEY-1/4&quot; X 7/8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |00158001-15<br /> |CHAIN-ROLLER-#50<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |PT0102<br /> |LINK-CONNECTING-#50<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43057016<br /> |BLOCK-BEARING RETAINER<br /> |<br /> |<br /> |2<br /> |-<br /> |6a<br /> |PT0414<br /> |RACE-TAPERED ROLLER BEARING<br /> |<br /> |''Included with 43057016''<br /> |2<br /> |-<br /> |7<br /> |PT0623<br /> |SEAL-GREASE<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0416<br /> |BOLT-SHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |PT0415<br /> |BEARING-TAPERED ROLLER<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW1050<br /> |NUT-LOCK<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |43057017<br /> |PLATE-COVER<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0415<br /> |BOLT-SHCS-3/8-16 X 3/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |13<br /> |PT0624<br /> |FITTING-ZERK<br /> |<br /> |<br /> |2<br /> |}<br /> ===&lt;big&gt;&lt;u&gt;Hose Carrier Plate&lt;/u&gt;&lt;/big&gt;===<br /> [[File:BE-TS Hose Carrier Plate.png|alt=BE-TS Hose Carrier Plate|frameless|554x554px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43915018<br /> |PLATE-HOSE CARRIER<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |PT0618<br /> |BRACKET-FIXED END<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |PT0617<br /> |HOSE CARRIER<br /> |<br /> |''20 links required''<br /> |3 FT<br /> |-<br /> |5<br /> |PT0619<br /> |BRACKET-MOVING END<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |9<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |10<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HC0262<br /> |VALVE-CROSS PORT RELIEF<br /> |<br /> |''Includes cartridges''<br /> |1<br /> |-<br /> |12a<br /> |43846002<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''†† For Item 12 (Not shown)''<br /> |2<br /> |-<br /> |13<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |H1560<br /> |ADAPTER-45 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |E1329<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |''PVC - Includes cover''<br /> |1<br /> |-<br /> |19<br /> |HW0212<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |20<br /> |HW0102<br /> |WASHER-FLAT-#10-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |21<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |22<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |23<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |''For Items 21 &amp; 22 (Not shown)''<br /> |3<br /> |-<br /> |24<br /> |HW1076<br /> |BOLT-FHSCS-3/8-16 X 1&quot;<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Units built prior to February 2014 without extended reach option use (4) HW0403 mounting bolts.''<br /> <br /> ''†† Cartridges are for replacement only.''<br /> |}<br /> <br /> === &lt;big&gt;'''&lt;u&gt;Magnet Components ''(Rotary Actuator)''&lt;/u&gt;'''&lt;/big&gt; ===<br /> <br /> ==== '''''&lt;big&gt;[Discontinued] Magnet Arm Configuration&lt;/big&gt;''''' ====<br /> [[File:BE-TS (Discontinued) Magnet Arm Configuration.png|alt=BE-TS (Discontinued) Magnet Arm Configuration|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41257014<br /> |TIE PLATE-SWING ARM<br /> |<br /> |''All units''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |41655008<br /> |EXTENSION-ARM<br /> |<br /> |''BE-36 only (Not shown)''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |43455001<br /> |EXTENSION-ARM<br /> |<br /> |''BE-42 only (Not shown)''<br /> |1<br /> |-<br /> |2<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0113<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0010<br /> |NUT-JAM-5/8-11<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |41655001<br /> |CARRIER TUBE-MAGNET SWING SHAFT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |7<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |9<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |6<br /> |-<br /> |10<br /> |41657006<br /> |SHAFT-MAGNET SWING<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |41698001<br /> |KEY-3/8&quot; X 7/16&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |N/A<br /> |STOP-MAGNET SWING<br /> |<br /> |''† Dicontinued''<br /> |1<br /> |-<br /> |13<br /> |PT0430<br /> |FLANGE BEARING-4 BOLT-1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |HW0513<br /> |BOLT-HHCS-1/2-13 X 2 1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |15<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |16<br /> |-<br /> |16<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |17<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |-<br /> |18<br /> |41655002<br /> |PLATE-MAGNET MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |41257015<br /> |BLOCK-TIGHTENER<br /> |<br /> |''2-piece item''<br /> |1<br /> |-<br /> |20<br /> |41257016<br /> |BLOCK-FIXED<br /> |<br /> |''2-piece item''<br /> |1<br /> |-<br /> |21<br /> |HW0423<br /> |BOLT-SHCS-3/8-16 X 3 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0806<br /> |SET SCREW-3/8-16 X 2&quot;<br /> |<br /> |''Replaces Swivel Head''<br /> |4<br /> |-<br /> |24<br /> |HW0424<br /> |NUT-JAM-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |25<br /> |41657017<br /> |INSULATOR-MAGNET MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |26<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |27<br /> |41657008<br /> |PAD-MAGNET SLIDE<br /> |<br /> |<br /> |2<br /> |-<br /> |28<br /> |HW0314<br /> |BOLT-FHSCS-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Refer to [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#&amp;#x5B;Current&amp;#x5D;_Magnet_Arm_Configuration_(Rotary_Actuator) &lt;nowiki&gt;[Current] Magnet Arm Configuration (Rotary Actuator)&lt;/nowiki&gt;] section for replacement / upgrade parts.''<br /> |}<br /> <br /> ==== '''&lt;big&gt;''Magnet Pivot Stop (Rotary Actuator)''&lt;/big&gt;''' ====<br /> [[File:BE-TS Magnet Pivot Stop.png|alt=BE-TS Magnet Pivot Stop|frameless|547x547px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |MAGNET PUSH/PULL ARM<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |43055010<br /> |MAGNET MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |PT0470<br /> |BEARING-MAGNET PIVOT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0525<br /> |BOLT-CARRIAGE-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |5<br /> |HW0524<br /> |BOLT-CARRIAGE-1/2-13 X 2&quot;<br /> |<br /> |''†† Stop Plate location''<br /> |4<br /> |-<br /> |6<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |7<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |16<br /> |-<br /> |8<br /> |43058009<br /> |PLATE-ROTATION STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |43058003<br /> |SLEEVE-STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43058010<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |PL0501<br /> |GROMMET-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |43057037<br /> |INSULATOR-BOTTOM<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |16<br /> |41657008<br /> |SLIDE-MAGNET<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0314<br /> |BOLT-FHSCS-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |44558001<br /> |PLATE-ROTATION STOP<br /> |<br /> |''†† Single compartment units only''<br /> |2<br /> |-<br /> |REF<br /> |43052014<br /> |ADJUSTABLE PUSH-PULL ARM<br /> |<br /> |''Includes Items 19-23''<br /> |A/R<br /> |-<br /> |19<br /> |43055018<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |20<br /> |43055019<br /> |MAGNET MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |21<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |22<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† 1-Piece Arm no longer available. Must be replaced with Adjustable Arm.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Single compartment Stop Plates require (1) additional 2&quot; long Carriage Bolt each''<br /> |}<br /> <br /> ==== &lt;big&gt;''[Current] Magnet Arm Configuration (Rotary Actuator)''&lt;/big&gt; ====<br /> [[File:BE-TS (Current) Magnet Arm Configuration.png|alt=BE-TS (Current) Magnet Arm Configuration|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |80252012<br /> |MAGNET SWING STOP KIT<br /> |<br /> |''Includes Items 1 through 6''<br /> |A/R<br /> |-<br /> |1<br /> |43057029<br /> |PLATE-STOP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43058003<br /> |SLEEVE-STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |43057030<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |PL0501<br /> |GROMMET-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0509<br /> |BOLT-HHCS-1/2-13 X 4 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |44557003<br /> |PLATE-STOP<br /> |<br /> |''† Single compartment units only''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† For units equipped with Pivot Shaft. See [Current] Magnet Arm Configuration (Rotary Actuator) for units with Independent Magnet Pivot Bearings.'' <br /> |}<br /> <br /> ==== &lt;big&gt;''Magnet Mounting Hardware (Rotary Actuator)''&lt;/big&gt; ====<br /> [[File:BE-TS Magnet Mounting Hardware (Rotary Actuator).png|alt=BE-TS Magnet Mounting Hardware (Rotary Actuator)|frameless|554x554px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43032009<br /> |MAGNET ASSEMBLY<br /> |<br /> |''Includes Items 1 through 12''<br /> |A/R<br /> |-<br /> |1<br /> |N/A<br /> |ELECTROMAGNET-95VDC<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |E0314<br /> |SENSOR-PROXIMITY-30MM<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |N/A<br /> |GASKET-REAR<br /> |<br /> |''Discontinued - Not used''<br /> |2<br /> |-<br /> |4<br /> |41657002<br /> |COVER-PROXIMITY SENSOR HOUSING<br /> |<br /> |''Rear''<br /> |2<br /> |-<br /> |5<br /> |HW1065<br /> |SCREW-SHCS-#6-32 X 3/8&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |6<br /> |HW1066<br /> |WASHER-LOCK-#6<br /> |<br /> |<br /> |8<br /> |-<br /> |7<br /> |E0376<br /> |INDICATOR LIGHT<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |8<br /> |E0335<br /> |RECEPTACLE-5 PIN MALE<br /> |<br /> |''With 12&quot; lead''<br /> |2<br /> |-<br /> |9<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |N/A<br /> |GASKET-FRONT<br /> |<br /> |''Discontinued - Not used''<br /> |2<br /> |-<br /> |11<br /> |41657003<br /> |COVER-PROXIMITY SENSOR HOUSING<br /> |80252015<br /> |''Front''<br /> |2<br /> |-<br /> |12<br /> |HW0138<br /> |SCREW-FHSCS-#8-32 X 3/8&quot;<br /> |80252015<br /> |<br /> |8<br /> |-<br /> |13<br /> |HW0433<br /> |STUD-1/2-13 X 5&quot;<br /> |80252006<br /> | rowspan=&quot;5&quot; |''For units with Magnet Pivot Shaft only.'' <br /> <br /> ''See [Discontinued] Magnet Arm Configuration for units built prior to 11/01/14''<br /> |8<br /> |-<br /> |14<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |80252006<br /> |8<br /> |-<br /> |15<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |80252006<br /> |40<br /> |-<br /> |16<br /> |HW1002<br /> |SPRING-1/2&quot;<br /> |80252006<br /> |24<br /> |-<br /> |17<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |80252006<br /> |8<br /> |-<br /> |18<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |80252014<br /> | rowspan=&quot;4&quot; |''For units with independent Pivot Bearings only.'' <br /> <br /> ''See [Current] Magnet Arm Configuration for units built 11/01/14 to present)''<br /> |4<br /> |-<br /> |19<br /> |HW1002<br /> |SPRING-1/2&quot;<br /> |80252014<br /> |4<br /> |-<br /> |20<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |80252014<br /> |8<br /> |-<br /> |21<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |80252014<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Extractors built or replacement magnets shipped prior to October 2021 used multi-piece indicator lights with replaceable bulb and lens and are no longer available. Current indicator light is a 1-piece LED assembly. Replacement of any multi-piece component requires replacing entire assembly with current, 1-piece indicator light.''<br /> |}<br /> <br /> === '''''Magnet Cords (Rotary Actuator)''''' ===<br /> [[File:BE-TS Magnet Cords.png|alt=BE-TS Magnet Cords|frameless|555x555px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1105<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |''Weather proof box''<br /> |1<br /> |-<br /> |2<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |E1106<br /> |COVER-JUNCTION BOX<br /> |<br /> |''Weather proof with gasket'' <br /> |1<br /> |-<br /> |4<br /> |E0333<br /> |RECEPTACLE-9 PIN MALE<br /> |<br /> |''With 12&quot; lead''<br /> |1<br /> |-<br /> |5<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |6<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |7<br /> |E0334<br /> |CORD-5 PIN FEMALE<br /> |<br /> |''With 36&quot; lead''<br /> |2<br /> |-<br /> |8<br /> |E0332<br /> |CORD-9 PIN FEMALE-90 DEG<br /> |<br /> |''With 36&quot; lead''<br /> |1<br /> |-<br /> |9<br /> |PL0501<br /> |GROMMET-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |41657013-2<br /> |PLATE-PANEL MOUNTING<br /> |<br /> |''With single cable hole''<br /> |1<br /> |-<br /> |11<br /> |E0334-6<br /> |CORD-5 PIN FEMALE<br /> |<br /> |''With 72&quot; lead''<br /> |2<br /> |-<br /> |12<br /> |43057038-2<br /> |PLATE-PANEL MOUNTING<br /> |<br /> |''With dual cable holes''<br /> |1<br /> |}<br /> '''''&lt;big&gt;Magnet Panel Mounting (Rotary Actuator)&lt;/big&gt;'''''<br /> <br /> [[File:BE-TS Panel Mounting (Rotary Actuator).png|alt=BE-TS Panel Mounting (Rotary Actuator)|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43057021<br /> |PLATE-STIFFENER<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |''Not shown''<br /> |24<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |5<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |12<br /> |-<br /> |6<br /> |41637001<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0325<br /> |BOLT-5/16-18 X 1 3/4&quot;-PAN HEAD<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |N/A<br /> |INSULATOR-THREADED FEMALE<br /> |<br /> |''Discontinued''<br /> |4<br /> |-<br /> |9<br /> |HW0106<br /> |WASHER-FLAT-5/16&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0326<br /> |NUT-NILN-5/16-18<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |E1016<br /> |FUSE HOLDER<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |E0325<br /> |FUSE-7AMP-250VAC<br /> |<br /> |''FLM-7 or FNM-7''<br /> |1<br /> |-<br /> |16<br /> |PL0307<br /> |INSULATOR-MALE STUD<br /> |<br /> |<br /> |4<br /> |}<br /> '''''&lt;big&gt;Magnet Extractor Electrical Panel (Rotary Actuator)&lt;/big&gt;'''''<br /> <br /> [[File:BE-TS Magnet Extractor Electrical Panel (Rotary Actuator).png|alt=BE-TS Magnet Extractor Electrical Panel (Rotary Actuator)|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41637001<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41637002<br /> |WIRE WAY<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |41637003<br /> |WIRE WAY<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |41637004<br /> |TRACK-TERMINAL BLOCK MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |41637005<br /> |TRACK-TERMINAL BLOCK MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |7<br /> |HW0132<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |<br /> |10<br /> |-<br /> |8<br /> |HW0133<br /> |NUT-NILN-#8-32<br /> |<br /> |''Not shown''<br /> |16<br /> |-<br /> |9<br /> |E1020<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |12<br /> |-<br /> |10<br /> |E1040<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |E1330<br /> |END ANCHOR<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |E1009<br /> |RECTIFIER-FULL WAVE BRIDGE<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |HW0135<br /> |SCREW-RHMS-#8-32 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |E1313<br /> |SOCKET-RELAY-8 PIN<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0139<br /> |SCREW-RHMS-#8-32 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |E0331<br /> |RELAY-DPDT-110VAC<br /> |<br /> |''with Indicator Light''<br /> |2<br /> |}<br /> <br /> === &lt;big&gt;'''&lt;u&gt;Swing Arm Stop (Rotary Actuator)&lt;/u&gt;'''&lt;/big&gt; ===<br /> [[File:BE-TS Swing Arm Stop (Rotary Actuator).png|alt=BE-TS Swing Arm Stop (Rotary Actuator)|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055007<br /> |MOUNT-STOP-SWING ARM<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |2<br /> |43057024<br /> |STOP-SWING ARM<br /> |<br /> |''BE-24''<br /> |4<br /> |-<br /> |43057023<br /> |STOP-SWING ARM<br /> |<br /> |''BE-36 &amp; BE-42''<br /> |4<br /> |-<br /> |3<br /> |HW0304<br /> |BOLT-HHCS-1/4-20 X 1 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Vacuum_Swing_Arm_Stop_(Rotary_Actuator) Vacuum Swing Arm Stop (Rotary Actuator)] section for single compartment stop mount and stop.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Extended Reach (Rotary Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Vacuum Extended Reach (Rotary Actuator).png|alt=BE-TS Vacuum Extended Reach (Rotary Actuator)|frameless|536x536px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41257014<br /> |TIE PLATE-SWING ARM<br /> |<br /> |''All units''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |41655008<br /> |EXTENSION-ARM<br /> |<br /> |''BE-36 only (Not shown)''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |43455001<br /> |EXTENSION-ARM<br /> |<br /> |''BE-42 only (Not shown)''<br /> |1<br /> |-<br /> |2<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |P0301-1<br /> |HOSE-COIL-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |41257035<br /> |STANDOFF<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW1072<br /> |RESTRAINT-HOSE<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0318<br /> |BOLT-SHCS-1/4-20 X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |HW0312<br /> |SCREW-SHSS-1/4-20 X 1&quot;-CUP POINT<br /> |<br /> |<br /> |1<br /> |}<br /> [[File:BE-TS Vacuum Extended Reach (Rotary Actuator) 2.png|alt=BE-TS Vacuum Extended Reach (Rotary Actuator)|frameless|547x547px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41255005<br /> |ARM-EXTENSION-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0416<br /> |CYLINDER-EXTENDED REACH-VACUUM<br /> |<br /> |''2 1/2&quot; X 12&quot; Cylinder''<br /> |1<br /> |-<br /> |3<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JICM X #6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |41257031<br /> |PIN-CLEVIS END<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |00197036<br /> |PIN-ROD END<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1058<br /> |PIN-HITCH<br /> |<br /> |<br /> |4<br /> |}<br /> [[File:BE-TS Vacuum Extended Reach (Rotary Actuator) 3.png|alt=BE-TS Vacuum Extended Reach (Rotary Actuator) 3|frameless|541x541px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41255004<br /> |HOUSING-EXTENDED REACH-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41257030<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |41258002<br /> |PLATE-BEARING<br /> |80258001<br /> |''Side''<br /> |2<br /> |-<br /> |8<br /> |41258005<br /> |PLATE-SHIM<br /> |80258001<br /> |''Side''<br /> |2<br /> |-<br /> |9<br /> |41258003<br /> |PLATE-BEARING<br /> |80258001<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |10<br /> |41258004<br /> |PLATE-SHIM<br /> |80258001<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |11<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |28<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |28<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Extended Reach (Rotary Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Extended Reach Rotary Actuator.png|alt=BE-TS Extended Reach Rotary Actuator|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43046001<br /> |ROTARY ACTUATOR<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |80000002<br /> |ROTARY ACTUATOR BASE ASSEMBLY<br /> |<br /> |''Without Actuator''<br /> |1<br /> |-<br /> |2A<br /> |N/A<br /> |VERTICAL CARRIER PLATE-OUTER<br /> |<br /> |''Included with 80000002''<br /> |2<br /> |-<br /> |2B<br /> |N/A<br /> |VERTICAL CARRIER PLATE-INNER<br /> |<br /> |''Included with 80000002''<br /> |1<br /> |-<br /> |2C<br /> |N/A<br /> |CARRIER BASE PLATE<br /> |<br /> |''Included with 80000002''<br /> |1<br /> |-<br /> |3<br /> |HW1070<br /> |PIN-PULL DOWEL-5/8&quot; X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0508<br /> |BOLT-SHCS-1/2-13 X 3/4&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW1045<br /> |PIN-PULL DOWEL-3/8&quot; X 1 1/2&quot;<br /> |<br /> |''Included with 80000002''<br /> |6<br /> |-<br /> |6<br /> |HW0412<br /> |BOLT-SHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |''Included with 80000002''<br /> |12<br /> |-<br /> |7<br /> |H0010<br /> |FITTING-BULKHEAD-3/4-16 X #4 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |4<br /> |}<br /> [[File:BE-TS Extended Reach Rotary Actuator 2.png|alt=BE-TS Extended Reach Rotary Actuator |frameless|535x535px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PT0634<br /> |BRACKET-MALE END<br /> |<br /> |''Sols as a set''<br /> |1<br /> |-<br /> |2<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |10<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |PT0627<br /> |HOSE CARRIER<br /> |<br /> |''14 links required''<br /> |39&quot;<br /> |-<br /> |7<br /> |PT0634<br /> |BRACKET-FEMALE END<br /> |<br /> |''Sols as a set''<br /> |1<br /> |-<br /> |8<br /> |HC0262<br /> |VALVE-CROSS PORT RELIEF<br /> |<br /> |<br /> |1<br /> |-<br /> |8a<br /> |43046003<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''† For Item 8 (Not shown)''<br /> |2<br /> |-<br /> |9<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |H1546<br /> |ADAPTER-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |H1617<br /> |ADAPTER-45 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HC0237<br /> |VALVE-SEQUENCING<br /> |<br /> |<br /> |1<br /> |-<br /> |12a<br /> |43046005<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''† For Item 12 (Not shown)''<br /> |A/R<br /> |-<br /> |13<br /> |HW0317<br /> |BOLT-HHCS-1/4-20 X 3 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |H1560<br /> |ADAPTER-45 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |H1600<br /> |ADAPTER-90 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Cartridges are for replacement only''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Extended Reach (Rotary Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Extended Reach (Rotary Actuator).png|alt=BE-TS Magnet Extended Reach (Rotary Actuator)|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055011<br /> |ARM-EXTENSION-MAGNET<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0415<br /> |CYLINDER-EXTENDED REACH-MAGNET<br /> |<br /> |''2 1/2&quot; X 8&quot; Cylinder''<br /> |1<br /> |-<br /> |3<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JICM X #6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CLEVIS END<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-ROD END<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-EXTERNAL-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW1043<br /> |CLAMP-CYLINDER<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |43057044-2<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |43058019<br /> |SUPPORT-CABLE-BAND CLAMP<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> [[File:BE-TS Magnet Extended Reach (Rotary Actuator) 2.png|alt=BE-TS Magnet Extended Reach (Rotary Actuator) |frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055012<br /> |HOUSING-EXTENDED REACH-MAGNET<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |43058013<br /> |PLATE-BEARING-SIDE<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |43058016<br /> |PLATE-SHIM-SIDE<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |43058014<br /> |PLATE-BEARING-UPPER/LOWER<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43058015<br /> |PLATE-SHIM-UPPER/LOWER<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |24<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |24<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Extended Reach End Plate&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Extended Reach End Plate.png|alt=BE-TS Extended Reach End Plate|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |CARRIER SHAFT-EXTRACTOR ARM<br /> |<br /> |''† 3-Hole version''<br /> |A/R<br /> |-<br /> |2<br /> |PT0413<br /> |COLLAR-SHAFT-3&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |50057009<br /> |PLATE-END-3 HOLE<br /> |<br /> |''Replacement part only''<br /> |4<br /> |-<br /> |4<br /> |50057010<br /> |SHIM-END PLATE<br /> |<br /> |''†† See notes''<br /> |A/R<br /> |-<br /> |5<br /> |HW1076<br /> |BOLT-FHSCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |6<br /> |43057045<br /> |CARRIER SHAFT-EXTRACTOR ARM<br /> |<br /> |''1-Hole version''<br /> |2<br /> |-<br /> |7<br /> |43017076<br /> |PLATE-END-1 HOLE<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† 3-Hole Carrier Shaft no longer available. Must replace 3-Hole shaft with current, 1-Hole version along with new ennd plates &amp; hardware.'' <br /> |-<br /> | colspan=&quot;6&quot; |''†† Shim quantity varies due to manufacturing tolerances.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Carrier Shafts &amp; Bearings&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Carrier Shafts &amp; Bearings (Helical Actuator).png|alt=BE-TS Carrier Shafts &amp; Bearings (Helical Actuator)|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43057045<br /> |CARRIER SHAFT-EXTRACTOR ARM<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |2<br /> |43054007<br /> |BEARING-EXTRACTOR ARM CARRIER<br /> |80252002<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0412<br /> |BOLT-SHCS-3/8-16 X 1 1/4&quot;<br /> |80252002<br /> |<br /> |16<br /> |-<br /> |4<br /> |PT0413<br /> |COLLAR-SHAFT-3&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |50057010<br /> |SHIM-END PLATE<br /> |<br /> |<br /> |A/R<br /> |-<br /> |6<br /> |43017076<br /> |PLATE-END-1 HOLE<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |PT0624<br /> |FITTING-ZERK<br /> |80252002<br /> |''Not shown''<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Extended_Reach_End_Plate Extended Reach End Plate] section for Extended Reach equipped units.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Drive Nut Assembly (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Drive Nut Assembly (Helical Actuator).png|alt=BE-TS Drive Nut Assembly (Helical Actuator)|frameless|600x600px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43054006<br /> |DRIVE NUT ASSEMBLY<br /> |80252003<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0426<br /> |BOLT-SHCS-3/8-16 X 5 1/2&quot;<br /> |80252003<br /> |''† See notes''<br /> |4<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |80252003<br /> |''† See notes''<br /> |4<br /> |-<br /> |4<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |80252003<br /> |''† See notes''<br /> |4<br /> |-<br /> |5<br /> |PT0624<br /> |FITTING-ZERK<br /> |80252003<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† It is recommended to replce mounting hardware when replacing Drive Nut Assembly.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Swing Arms &amp; Actuator (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;[Discontinued] Helical Actuator&lt;/big&gt;''''' ====<br /> [[File:BE-TS Swing Arms &amp; Actuator (Helical Actuator).png|alt=BE-TS [Discontinued] Swing Arms &amp; Actuator (Helical Actuator)|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |HELICAL ACTUATOR<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |43057046<br /> |ACTUATOR BASE PLATE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43058022<br /> |SPACER-ACTUATOR<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0725<br /> |BOLT-HHCS-3/4-16 X 4-3/4&quot;-GR8<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0066<br /> |NUT-JAM-3/4-16-GR8<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43055013<br /> |SWING ARM-LHS<br /> |<br /> | rowspan=&quot;6&quot; |''†† See notes''<br /> |1<br /> |-<br /> |7<br /> |HW0620<br /> |BOLT-HHCS-5/8-11 X 1-1/4&quot;<br /> |<br /> |6<br /> |-<br /> |8<br /> |HW0013<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |6<br /> |-<br /> |9<br /> |43055014<br /> |SWING ARM-RHS<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1-1/4&quot;<br /> |<br /> |6<br /> |-<br /> |11<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |6<br /> |-<br /> |12<br /> |43042008<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |43042010<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE, LONG<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |H1619<br /> |ADAPTER-90 DEG-#6 JICM X #4 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |H0010<br /> |FITTING-H-BULKHEAD-1/4 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |H1504<br /> |ADAPTER-#6 JICM X #4 NPTM<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW1082<br /> |CLAMP-HOSE<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Discontinued Helical Actuator no longer available. Must replace with current Helical Actuator Retro Kit 80252032. See [Current] Helical Actuator.'' <br /> <br /> ''†† Swing arms manufactured prior to January 2022 use 10 bolts &amp; washers per Swing Arm.'' <br /> |}<br /> <br /> ==== '''''&lt;big&gt;[Current] Helical Actuator&lt;/big&gt;''''' ====<br /> [[File:BE-TS (Current) Swing Arms &amp; Actuator (Helical Actuator).png|alt=BE-TS (Current) Swing Arms &amp; Actuator (Helical Actuator)|frameless|544x544px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |N/A<br /> |43052020<br /> |HELICAL ACTUATOR ASSEMBLY<br /> |<br /> |''Includes Items 1 through 17''<br /> |1<br /> |-<br /> |1<br /> |HC0180<br /> |HELICAL ACTUATOR<br /> |80252032<br /> |<br /> |1<br /> |-<br /> |2<br /> |43057046<br /> |ACTUATOR BASE PLATE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43058022<br /> |SPACER-ACTUATOR<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0725<br /> |BOLT-HHCS-3/4-16 X 4-3/4&quot;-GR8<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0066<br /> |NUT-JAM-3/4-16-GR8<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43055013<br /> |SWING ARM-LHS<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0620<br /> |BOLT-HHCS-5/8-11 X 1-1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |8<br /> |HW0013<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |9<br /> |43055014<br /> |SWING ARM-RHS<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1-1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |11<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |12<br /> |43042011<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE, 90 DEG<br /> |80252032<br /> |''† See notes''<br /> |1<br /> |-<br /> |13<br /> |43042012<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE, SHORT<br /> |80252032<br /> |''† See notes''<br /> |1<br /> |-<br /> |14<br /> |H1619<br /> |ADAPTER-90 DEG-#6 JICM X #4 SAEM<br /> |80252032<br /> |<br /> |2<br /> |-<br /> |15<br /> |H0010<br /> |FITTING-H-BULKHEAD-1/4 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |H1504<br /> |ADAPTER-#6 JICM X #4 NPTM<br /> |80252032<br /> |<br /> |1<br /> |-<br /> |17<br /> |H1691<br /> |ADAPTER-45 DEG-#6 JICM X #4 NPTM<br /> |80252032<br /> |''† See notes''<br /> |1<br /> |-<br /> |18<br /> |HW1082<br /> |CLAMP-HOSE<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Hard-Pipes and 45 degree adapter required if replacing discontinued actuator with current Actuator Kit Part # 80252032 required for discontinued actuator replacement.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Swing Arm Stops &amp; Tie Plate&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Swing Arm Stops &amp; Tie Plate (Helical Actuator).png|alt=BE-TS Swing Arm Stops &amp; Tie Plate (Helical Actuator)|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43057050<br /> |TIE PLATE-HELICAL SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0113<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0010<br /> |NUT-JAM-5/8-11<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |43057052<br /> |STOP-POLY-SWING ARM<br /> |<br /> |''† See notes''<br /> |4<br /> |-<br /> |6<br /> |HW0441<br /> |BOLT-FHSCS-3/8-16 X 1-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW0031<br /> |NUT-LOCK-3/8-16, DEFORMED THREAD<br /> |<br /> |''† † See notes''<br /> |4<br /> |-<br /> |8<br /> |44555002<br /> |SWING ARM STOP<br /> |<br /> |''Single compartment use only''<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Replacement Poly Stop design updated from Square to Round. Stop Spacers not required with current, Round-Style Stops.''<br /> |-<br /> | colspan=&quot;6&quot; |''† † Deformed Thread Lock Nut replaces Acorn Nut and Split Lock Washer used previously.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Push/Pull Arm Mounting (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Push-Pull Arm Mounting.png|alt=BE-TS Push-Pull Arm Mounting (Helical Actuator)|frameless|542x542px]]<br /> {| class=&quot;wikitable&quot;<br /> ! rowspan=&quot;2&quot; |ITEM<br /> ! rowspan=&quot;2&quot; |BHS PART NUMBER<br /> ! rowspan=&quot;2&quot; |DESCRIPTION<br /> ! rowspan=&quot;2&quot; |REF. KIT NO.<br /> ! rowspan=&quot;2&quot; |NOTES<br /> ! colspan=&quot;3&quot; |NO. REQ<br /> |-<br /> !BE-24<br /> !BE-36<br /> !BE-42<br /> |-<br /> | rowspan=&quot;2&quot; |1<br /> |41655008<br /> |EXTENSION-ARM<br /> |<br /> |''†BE-36 units only''<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |1<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |43455001<br /> |EXTENSION-ARM<br /> |<br /> |''†BE-42 units only''<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |1<br /> |-<br /> |2<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> | colspan=&quot;2&quot; |12<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |12<br /> | colspan=&quot;2&quot; |24<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> | colspan=&quot;2&quot; |12<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |6<br /> | colspan=&quot;2&quot; |12<br /> |-<br /> ! colspan=&quot;8&quot; |NOTES<br /> |-<br /> | colspan=&quot;8&quot; |''† BE-24 units do not utilize an Arm Extension.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Extractor Arm (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Non-Pivoting Vacuum Cup Arm (Helical Actuator)&lt;/big&gt;''''' ====<br /> [[File:BE-TS Non-Pivoting Vacuum Cup Arm (Helical Actuator).png|alt=BE-TS Non-Pivoting Vacuum Cup Arm (Helical Actuator)|frameless|578x578px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0428<br /> |STUD-VACUUM-3/8-16 X 5&quot;<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |2<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |HW-KIT-2<br /> |<br /> |40<br /> |-<br /> |3<br /> |HW1001<br /> |SPRING-3/8&quot;<br /> |HW-KIT-2<br /> |<br /> |24<br /> |-<br /> |4<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0424<br /> |NUT-JAM-3/8-16<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |6<br /> |P0402<br /> |HOSE BARB-1/4&quot; X #4 MNPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |REF<br /> |43052014<br /> |ADJUSTABLE PUSH-PULL ARM<br /> |<br /> |''Includes Items 7 through 11''<br /> |A/R<br /> |-<br /> |7<br /> |43055018<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |43055019<br /> |VACUUM CUP MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Pivoting Vacuum Cup Arm (Helical Actuator)&lt;/big&gt;''''' ====<br /> [[File:BE-TS Pivoting Vacuum Cup Arm (Helical Actuator).png|alt=BE-TS Pivoting Vacuum Cup Arm (Helical Actuator)|frameless|525x525px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43052014<br /> |ADJUSTABLE PUSH-PULL ARM<br /> |<br /> |''Includes Items 1 through 5''<br /> |A/R<br /> |-<br /> |1<br /> |43055018<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43055019<br /> |VACUUM CUP MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |43055020<br /> |MOUNT-PIVOT-VACUUM CUP<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |PT0470<br /> |BEARING-PIVOT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0525<br /> |BOLT-CARRIAGE-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |9<br /> |HW0524<br /> |BOLT-CARRIAGE-1/2-13 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |11<br /> |HW0008<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |16<br /> |-<br /> |12<br /> |43058009<br /> |PLATE-ROTATION STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |43058003<br /> |SLEEVE-STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |43058010<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |4<br /> |-<br /> |16<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |43037002-2<br /> |SUPPORT-CABLE RESTRAINT<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |21<br /> |P0506<br /> |ELBOW-STR-90 DEG-#4 NPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |22<br /> |P0402<br /> |HOSE BARB-1/4&quot; X #4 MNPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |23<br /> |43057056-2<br /> |BRACKET-HOSE SUPPORT<br /> |<br /> |<br /> |2<br /> |-<br /> |24<br /> |PL0507<br /> |GROMMET-5/8&quot; I.D.<br /> |<br /> |<br /> |2<br /> |-<br /> |25<br /> |P0302<br /> |HOSE-VACUUM-1/4&quot; I.D.<br /> |<br /> |''2 pieces at 48&quot; each''<br /> |96&quot;<br /> |-<br /> |26<br /> |HW0443<br /> |BOLT-HHCS-3/8-16 X 3-1/2&quot;<br /> |HW-KIT-3<br /> |<br /> |8<br /> |-<br /> |27<br /> |HW1001<br /> |SPRING-3/8&quot;<br /> |HW-KIT-3<br /> |<br /> |16<br /> |-<br /> |28<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |HW-KIT-3<br /> |<br /> |32<br /> |-<br /> |29<br /> |HW0424<br /> |NUT-JAM-3/8-16<br /> |HW-KIT-3<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Cup Rotation Stop (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Vacuum Cup Rotation Stop (Helical Actuator).png|alt=BE-TS Vacuum Cup Rotation Stop (Helical Actuator)|frameless|583x583px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |445558001<br /> |PLATE-ROTATION STOP<br /> |<br /> |''† Single compartment units only''<br /> |2<br /> |-<br /> |2<br /> |HW0525<br /> |BOLT-CARRIAGE-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0524<br /> |BOLT-CARRIAGE-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0008<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Components (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Vacuum Components (Helical Actuator).png|alt=BE-TS Vacuum Components (Helical Actuator)|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43058021<br /> |STIFFENER PLATE-HELICAL SWING ARM<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |24<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |5<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |12<br /> |-<br /> |6<br /> |P0005<br /> |PUMP-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |P0207<br /> |VALVE-VACUUM RELEASE<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |P0208<br /> |FILTER-HI FLOW<br /> |<br /> |<br /> |3<br /> |-<br /> |9<br /> |H0011<br /> |NIPPLE-#4 X 2&quot;-BRASS<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |P0502<br /> |TEE-#4 FNPT-BRASS<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |P0506<br /> |ELBOW-STR-90 DEG-#4 NPT-BRASS<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |P0503<br /> |NIPPLE-#4 NPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |P0402<br /> |HOSE BARB-1/4&quot; X #4 MNPT-BRASS<br /> |<br /> |<br /> |6<br /> |-<br /> |14<br /> |P0111<br /> |FILTER-VACUUM-IN-LINE<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0206<br /> |SCREW-RHMS-#10-32 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |43037014-2<br /> |BRACKET-CABLE RESTRAINT<br /> |<br /> |<br /> |1<br /> |-<br /> |17<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |18<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |21<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |22<br /> |E0624<br /> |CONNECTOR-1/2&quot;<br /> |<br /> |''Includes Lock Nut''<br /> |1<br /> |-<br /> |23<br /> |HW0212<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Arm (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Arm (Helical Actuator).png|alt=BE-TS Magnet Arm (Helical Actuator)|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43052014<br /> |ADJUSTABLE PUSH-PULL ARM<br /> |<br /> |''Includes Items 1 through 5''<br /> |A/R<br /> |-<br /> |1<br /> |43055018<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43055019<br /> |VACUUM CUP MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |43055016<br /> |MOUNT-PIVOT-MAGNET<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |PT0470<br /> |BEARING-PIVOT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0525<br /> |BOLT-CARRIAGE-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |9<br /> |HW0524<br /> |BOLT-CARRIAGE-1/2-13 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |11<br /> |HW0008<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |16<br /> |-<br /> |12<br /> |43058009<br /> |PLATE-ROTATION STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |43058003<br /> |SLEEVE-STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |43058010<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |18<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |43037002-2<br /> |SUPPORT-CABLE RESTRAINT<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |21<br /> |E0334-6'<br /> |CORD-5 PIN FEMALE<br /> |<br /> |''With 72&quot; lead''<br /> |2<br /> |-<br /> |22<br /> |E1041<br /> |WIRE LOOM-SPIRAL-3/8&quot;<br /> |<br /> |''2 pieces at 24&quot; each''<br /> |48&quot;<br /> |-<br /> |23<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |2<br /> |-<br /> |24<br /> |43057037<br /> |INSULATOR-BOTTOM<br /> |<br /> |<br /> |2<br /> |-<br /> |25<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |26<br /> |41657008<br /> |SLIDE-MAGNET<br /> |<br /> |<br /> |2<br /> |-<br /> |27<br /> |HW0314<br /> |BOLT-FHSCS-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Assembly (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Assembly (Helical Actuator).png|alt=BE-TS Magnet Assembly (Helical Actuator)|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43032009<br /> |MAGNET ASSEMBLY<br /> |<br /> |''Includes Items 1 through 12''<br /> |A/R<br /> |-<br /> |1<br /> |N/A<br /> |ELECTROMAGNET-95VDC<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |E0314<br /> |SENSOR-PROXIMITY-30MM<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |41657002<br /> |COVER-PROXIMITY SENSOR HOUSING<br /> |<br /> |''Rear''<br /> |2<br /> |-<br /> |4<br /> |HW1065<br /> |SCREW-SHCS-#6-32 X 3/8&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW1066<br /> |WASHER-LOCK-#6<br /> |<br /> |<br /> |8<br /> |-<br /> |6<br /> |E0335<br /> |RECEPTACLE-5 PIN MALE<br /> |<br /> |''With 12&quot; lead''<br /> |2<br /> |-<br /> |7<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |E0376<br /> |INDICATOR LIGHT<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |9<br /> |41657003<br /> |COVER-PROXIMITY SENSOR HOUSING<br /> |80252015<br /> |''Front''<br /> |2<br /> |-<br /> |10<br /> |HW0138<br /> |SCREW-FHSCS-#8-32 X 3/8&quot;<br /> |80252015<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |80252014<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW1002<br /> |SPRING-1/2&quot;<br /> |80252014<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |80252014<br /> |<br /> |8<br /> |-<br /> |14<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |80252014<br /> |<br /> |4<br /> |-<br /> |15<br /> |E0336<br /> |METAL OXIDE VARISTOR<br /> |<br /> |''Not shown''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Extractors built or replacement magnets shipped prior to October 2021 used Multi-Piece Indicator Lights with replaceable bulb and lens and are no longer available. Current Indicator Light is a 1-Piece LED assembly. Replacement of any Multi-Piece component requires replacing entire assembly with current, 1-Piece Indicator Light.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Components (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Components (Helical Actuator).png|alt=BE-TS Magnet Components (Helical Actuator)|frameless|534x534px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43058021<br /> |STIFFENER PLATE-HELICAL SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43057051-2<br /> |STIFFENER-MAGNET-HELICAL SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |4<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |24<br /> |-<br /> |5<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |6<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |12<br /> |-<br /> |7<br /> |PL0307<br /> |INSULATOR-MALE STUD<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0106<br /> |WASHER-FLAT-5/16&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |HW0105<br /> |WASHER-LOCK-5/16&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0004<br /> |NUT-HEX-5/16-18<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |12<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |13<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |14<br /> |E1016<br /> |FUSE HOLDER<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |E0325<br /> |FUSE-7 AMP-250VAC<br /> |<br /> |''FLM-7 or FNM-7''<br /> |1<br /> |-<br /> |16<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |17<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Panel (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Panel (Helical Actuator).png|alt=BE-TS Magnet Panel (Helical Actuator)|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41637001<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41637002<br /> |WIRE WAY-SHORT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |41637003<br /> |WIRE WAY-LONG<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |41637004<br /> |TRACK-MOUNTING-SHORT<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |41637005<br /> |TRACK-MOUNTING-LONG<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> | rowspan=&quot;3&quot; |''Mounting track hardware (Not shown)''<br /> |10<br /> |-<br /> |7<br /> |HW0132<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |10<br /> |-<br /> |8<br /> |HW0133<br /> |NUT-NILN-#8-32<br /> |<br /> |16<br /> |-<br /> |9<br /> |E1020<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |12<br /> |-<br /> |10<br /> |E1040<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |E1330<br /> |END ANCHOR<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |E1009<br /> |RECTIFIER-FULL WAVE BRIDGE<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |HW0135<br /> |SCREW-RHMS-#8-32 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |E1313<br /> |SOCKET-RELAY-8 PIN<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |E0331<br /> |RELAY-DPDT-110VAC<br /> |<br /> |''With Indicator Light''<br /> |2<br /> |-<br /> |16<br /> |HW0139<br /> |SCREW-RHMS-#8-32 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Extended Reach Hydraulics (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== &lt;big&gt;''[Discontinued] Helical Actuator''&lt;/big&gt; ====<br /> [[File:BE-TS (Discontinued) Helical Actuator.png|alt=BE-TS (Discontinued) Helical Actuator|frameless|546x546px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43042009<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |H0010<br /> |FITTING-BULKHEAD-3/4-16 X #4 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |43055017<br /> |ELBOW-BULKHEAD<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> | rowspan=&quot;3&quot; |7<br /> |4-48-0402-0402<br /> |HYD HOSE-1/4&quot; X 48&quot; (BE-24 UNITS)<br /> |<br /> | rowspan=&quot;3&quot; |''Cylinder rod-end hose''<br /> | rowspan=&quot;3&quot; |1<br /> |-<br /> |4-54-0402-0402<br /> |HYD HOSE-1/4&quot; X 54&quot; (BE-36 UNITS)<br /> |<br /> |-<br /> |4-56-0402-0402<br /> |HYD HOSE-1/4&quot; X 56&quot; (BE-42 UNITS)<br /> |<br /> |-<br /> | rowspan=&quot;3&quot; |8<br /> |4-38-0402-0402<br /> |HYD HOSE-1/4&quot; X 38&quot; (BE-24 UNITS)<br /> |<br /> | rowspan=&quot;3&quot; |''Cylinder rod-end hose''<br /> | rowspan=&quot;3&quot; |1<br /> |-<br /> |4-44-0402-0402<br /> |HYD HOSE-1/4&quot; X 44&quot; (BE-36 UNITS)<br /> |<br /> |-<br /> |4-46-0402-0402<br /> |HYD HOSE-1/4&quot; X 46&quot; (BE-42 UNITS)<br /> |<br /> |-<br /> |9<br /> |41257035<br /> |STANDOFF-HOSE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW1093<br /> |CLAMP-CABLE-3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0311<br /> |BOLT-FHSCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> ==== &lt;big&gt;''[Current] Helical Actuator''&lt;/big&gt; ====<br /> [[File:BE-TS (Current) Helical Actuator.png|alt=BE-TS (Current) Helical Actuator|frameless|567x567px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43042013<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |H0010<br /> |FITTING-BULKHEAD-3/4-16 X #4 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |43055021<br /> |ELBOW-BULKHEAD<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> | rowspan=&quot;3&quot; |7<br /> |4-48-0402-0402<br /> |HYD HOSE-1/4&quot; X 48&quot; (BE-24 UNITS)<br /> |<br /> | rowspan=&quot;3&quot; |''Cylinder rod-end hose''<br /> | rowspan=&quot;3&quot; |1<br /> |-<br /> |4-54-0402-0402<br /> |HYD HOSE-1/4&quot; X 54&quot; (BE-36 UNITS)<br /> |<br /> |-<br /> |4-56-0402-0402<br /> |HYD HOSE-1/4&quot; X 56&quot; (BE-42 UNITS)<br /> |<br /> |-<br /> | rowspan=&quot;3&quot; |8<br /> |4-38-0402-0402<br /> |HYD HOSE-1/4&quot; X 38&quot; (BE-24 UNITS)<br /> |<br /> | rowspan=&quot;3&quot; |''Cylinder rod-end hose''<br /> | rowspan=&quot;3&quot; |1<br /> |-<br /> |4-44-0402-0402<br /> |HYD HOSE-1/4&quot; X 44&quot; (BE-36 UNITS)<br /> |<br /> |-<br /> |4-46-0402-0402<br /> |HYD HOSE-1/4&quot; X 46&quot; (BE-42 UNITS)<br /> |<br /> |-<br /> |9<br /> |41257035<br /> |STANDOFF-HOSE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW1093<br /> |CLAMP-CABLE-3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0311<br /> |BOLT-FHSCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Extended Reach (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== &lt;big&gt;'''''Non-Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator)'''''&lt;/big&gt; ====<br /> [[File:BE-TS Non-Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator).png|alt=BE-TS Non-Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator)|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41255005<br /> |ARM-EXTENSION<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41255004<br /> |HOUSING-EXTENDED REACH<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0416<br /> |CYLINDER-2 1/2&quot; X 12&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CYLINDER-REAR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-CYLINDER-ROD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JIC X # 6 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |28<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |28<br /> |-<br /> |15<br /> |41258002<br /> |PLATE-BEARING<br /> |80258001<br /> |''Side''<br /> |2<br /> |-<br /> |16<br /> |41258005<br /> |PLATE-SHIM<br /> |80258001<br /> |''Side''<br /> |2<br /> |-<br /> |17<br /> |41258003<br /> |PLATE-BEARING<br /> |80258001<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |18<br /> |41258004<br /> |PLATE-SHIM<br /> |80258001<br /> |''Upper / lower''<br /> |2<br /> |}<br /> &lt;big&gt;'''''Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator)'''''&lt;/big&gt;<br /> <br /> [[File:BE-TS Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator).png|alt=BE-TS Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator)|frameless|553x553px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055011<br /> |ARM-EXTENSION<br /> |<br /> |''Pivoting cup only''<br /> |1<br /> |-<br /> |2<br /> |43055012<br /> |HOUSING-EXTENDED REACH<br /> |<br /> |''Pivoting cup only''<br /> |1<br /> |-<br /> |3<br /> |HC0415<br /> |CYLINDER-2 1/2&quot; X 8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CYLINDER-REAR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-CYLINDER-ROD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JIC X # 6 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |24<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |24<br /> |-<br /> |15<br /> |43058013<br /> |PLATE-BEARING<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |16<br /> |43058016<br /> |PLATE-SHIM<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |17<br /> |43058014<br /> |PLATE-BEARING<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |18<br /> |43058015<br /> |PLATE-SHIM<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |19<br /> |HW1043<br /> |CLAMP-CYLINDER<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |43058019<br /> |SUPPORT-CABLE-BAND CLAMP<br /> |<br /> |<br /> |2<br /> |-<br /> |21<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |22<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |23<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |24<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Extended Reach (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== &lt;big&gt;'''''[Discontinued] Extended Reach Magnet Arm (Helical Actuator)'''''&lt;/big&gt; ====<br /> [[File:BE-TS (Discontinued) Extended Reach Magnet Arm (Helical Actuator).png|alt=BE-TS (Discontinued) Extended Reach Magnet Arm (Helical Actuator)|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055011<br /> |ARM-EXTENSION<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43055012<br /> |HOUSING-EXTENDED REACH<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0415<br /> |CYLINDER-2 1/2&quot; X 8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CYLINDER-REAR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-CYLINDER-ROD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JIC X # 6 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |24<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |24<br /> |-<br /> |15<br /> |43058013<br /> |PLATE-BEARING<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |16<br /> |43058016<br /> |PLATE-SHIM<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |17<br /> |43058014<br /> |PLATE-BEARING<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |18<br /> |43058015<br /> |PLATE-SHIM<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |19<br /> |HW1043<br /> |CLAMP-CYLINDER<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |43058019<br /> |SUPPORT-CABLE-BAND CLAMP<br /> |<br /> |<br /> |2<br /> |-<br /> |21<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |24<br /> |43057004-2<br /> |SUPPORT-CABLE-MAGNET<br /> |<br /> |<br /> |2<br /> |}<br /> &lt;big&gt;'''''[Current] Extended Reach Magnet Arm (Helical Actuator)'''''&lt;/big&gt;<br /> <br /> [[File:BE-TS (Current) Extended Reach Magnet Arm (Helical Actuator).png|alt=BE-TS (Current) Extended Reach Magnet Arm (Helical Actuator)|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |50055004<br /> |ARM-EXTENSION<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |50055005<br /> |HOUSING-EXTENDED REACH<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0415<br /> |CYLINDER-2 1/2&quot; X 8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CYLINDER-REAR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-CYLINDER-ROD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JIC X # 6 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |20<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |20<br /> |-<br /> |15<br /> |50058009<br /> |PLATE-BEARING<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |16<br /> |50058012<br /> |PLATE-SHIM<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |17<br /> |50058010<br /> |PLATE-BEARING<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |18<br /> |50058011<br /> |PLATE-SHIM<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |19<br /> |HW1043<br /> |CLAMP-CYLINDER<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |43058019<br /> |SUPPORT-CABLE-BAND CLAMP<br /> |<br /> |<br /> |2<br /> |-<br /> |21<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |24<br /> |43057004-2<br /> |SUPPORT-CABLE-MAGNET<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> == &lt;big&gt;Drive and Idler Wheels&lt;/big&gt; ==<br /> <br /> === &lt;big&gt;&lt;u&gt;Drive Wheel Mounting&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Drive Wheel Mounting.png|alt=BE-TS Drive Wheel Mounting|frameless|519x519px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0503<br /> |BOLT-HHCS-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |2<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |''Cylinder Bracket bolt only''<br /> |2<br /> |-<br /> |3<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> === &lt;big&gt;&lt;u&gt;Drive Wheel Motors&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Drive Wheel Motors.png|alt=BE-TS Drive Wheel Motors|frameless|535x535px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;2&quot; |1<br /> |43822001-6B<br /> |FLOOR DRIVE ASSEMBLY (W/ 200CC MOTOR)<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |43822004-6B<br /> |FLOOR DRIVE ASSEMBLY (W/ 400CC MOTOR)<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |2<br /> |43827004<br /> |PLATE-MOTOR MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0416<br /> |BOLT-SHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |H1612<br /> |ADAPTER-90 DEG-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |N/A<br /> |ROD-THREADED-1/2-13 X 7 3/4&quot;<br /> |<br /> |''†† See notes''<br /> |8<br /> |-<br /> |7<br /> |N/A<br /> |SPACER-DRIVE WHEEL-4.75&quot; LG<br /> |<br /> |''†† See notes''<br /> |8<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |43827006<br /> |SPACER-DRIVE WHEEL-4.125&quot; LG<br /> |<br /> |Must be ordered as a set of 4<br /> |8<br /> |-<br /> |11<br /> |HW0516<br /> |BOLT-HHCS-1/2-13 X 6 1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |12<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> | rowspan=&quot;2&quot; |13<br /> |N/A<br /> |MOTOR-HYDRAULIC-200CC<br /> |<br /> |''††† Keyed Shaft''<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |N/A<br /> |MOTOR-HYDRAULIC-400CC<br /> |<br /> |''††† Keyed Shaft''<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |14<br /> |HW1071<br /> |KEY-WOODRUFF-#808 STD<br /> |<br /> |<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |15<br /> |HC0124-6B<br /> |MOTOR-HYDRAULIC-200CC<br /> |<br /> |''† Spline Shaft''<br /> |2<br /> |-<br /> |HC0126-6B<br /> |MOTOR-HYDRAULIC-400CC<br /> |80322003<br /> |''† Spline Shaft''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† 200CC Motors required for units equipped with Parallel Drive Circuit.''<br /> ''400CC Motors required for units equipped with Series Drive Circuit.''<br /> <br /> ''See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Cross_Port_Relief Cross Port Relief] section to determine if unit is Parallel or Series equipped and approximate effectivity of each type.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Parts obsolete and no longer available. Must replace with Items 10 &amp; 11.''<br /> |-<br /> | colspan=&quot;6&quot; |''††† Parts obsolete and no longer available. Must replace with Spline Drive Conversion Kit.''<br /> |}<br /> <br /> === &lt;big&gt;&lt;u&gt;Drive Wheel Bearings&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Drive Wheel Bearings.png|alt=BE-TS Drive Wheel Bearings|frameless|537x537px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43825001<br /> |FRAME-FLOOR DRIVE<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |C0510-1<br /> |WHEEL-10&quot; X 5&quot;-POLY<br /> |80322001<br /> |<br /> |2<br /> |-<br /> |3<br /> |43822003<br /> |SHAFT-WHEEL (W/ COUPLING BODY)<br /> |<br /> |''Available in multiple kits''<br /> |2<br /> |-<br /> |4<br /> |43897004<br /> |KEY-3/8&quot; X 4 3/4&quot;<br /> |80322001<br /> |<br /> |2<br /> |-<br /> |5<br /> |PT0430<br /> |FLANGE BEARING-4 BOLT-1 1/2&quot;<br /> |80322001<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |7<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |16<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |9<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |16<br /> |-<br /> |10<br /> |PT0321<br /> |CHAIN-COUPLING-#50<br /> |<br /> |''Includes connecting pin''<br /> |2<br /> |-<br /> |11<br /> |N/A<br /> |COUPLING BODY-TAPER BORE-#50<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |12<br /> |N/A<br /> |BUSHING-TAPER LOCK-1&quot;<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |13<br /> |HW0323<br /> |BOLT-HHCS-5/16-18 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |14<br /> |PT0330<br /> |COUPLING BODY-#50-SPLINE BORE<br /> |80322003<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW1110<br /> |RETAINING RING-1 1/2&quot;-HEAVY DUTY<br /> |<br /> |''†† Available in multiple kits''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Parts obsolete and no longer available. Spline Drive Conversion Kit required. Reuse of bushing after disassembly not recommended.'' <br /> |-<br /> | colspan=&quot;6&quot; |''† † Retaining Rings used on units shipped after 7/01/12. Units shipped from 7/01/13 are equipped with (2) Retaining Rings per shaft - (1) on each side of the wheel. Units shipped after 11/01/13 are equipped with only (1) Snap Rings as shown. Second Snap Ring is no longer used or required.''<br /> |-<br /> | colspan=&quot;6&quot; |''NOTE: Effectivity dates refer to dates new extractor units are shipped from the factory. Replacement part effectivity &lt;u&gt;'''may'''&lt;/u&gt; differ due to factory inventory levels at time of parts order. Consult factory if unsure of parts needed.''<br /> |}<br /> <br /> === &lt;big&gt;&lt;u&gt;Drive Wheel Assembly&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Drive Wheel Assembly.png|alt=BE-TS Drive Wheel Assembly|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43822005<br /> |RADIAL PISTON DRIVE WHEEL ASSEMBLY<br /> |<br /> |''Includes Items 1 through 6''<br /> |2<br /> |-<br /> |1<br /> |43825003<br /> |RADIAL PISTON DRIVE WHEEL MOUNT<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0160-1<br /> |400CC RADIAL PISTON MOTOR<br /> |<br /> |''Includes nuts &amp; studs''<br /> |1<br /> |-<br /> |REF<br /> |HC0160-STUD<br /> |STUD-M14-1.5 X 46MM<br /> |<br /> |''Replacement motor stud''<br /> |A/R<br /> |-<br /> |REF<br /> |HC0160-NUT<br /> |NUT-FLANGED HEX-M14-1.5<br /> |<br /> |''Replacement motor nut''<br /> |A/R<br /> |-<br /> |3<br /> |C0511<br /> |WHEEL-POLY-10 X 5&quot;-FLANGE MOUNT<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |5<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |6<br /> |-<br /> |7<br /> |H1612<br /> |ADAPTER-H-90 DEG-#10 SAEM X #8 JICM<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |H1539<br /> |ADAPTER-#8 JIC X #6 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1586<br /> |ADAPTER-90 DEG-#8 JICSW X #6 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |H0801<br /> |TEE-H-#6 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H1501<br /> |ADAPTER-#8 JIC X #6 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |H0200<br /> |REDUCER-#6 NPT X #4 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |H0206<br /> |PLUG-#4 NPT<br /> |<br /> |''† Left Drive Wheel only''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Plug used on Left Drive Wheel Assembly only. Hose from Left Drive Wheel Assembly is connected to tee on Right Drive Wheel Assembly.'' <br /> |}<br /> <br /> === &lt;big&gt;&lt;u&gt;Idler Casters&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Idler Casters.png|alt=BE-TS Idler Casters|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |C0500-1<br /> |CASTER-RIGID-10&quot; X 5&quot;-POLY<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |3<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |<br /> |''For Cylinder Bracket position'' <br /> |2<br /> |-<br /> |4<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |16<br /> |-<br /> |5<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |6<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> == &lt;big&gt;Electrical&lt;/big&gt; ==<br /> <br /> === &lt;u&gt;&lt;big&gt;AC Power Stanchion&lt;/big&gt;&lt;/u&gt; ===<br /> <br /> ==== &lt;big&gt;''Aero-Motive Energy Rail''&lt;/big&gt; ====<br /> [[File:BE-TS Aero-Motive Energy Rail.png|alt=BE-TS Aero-Motive Energy Rail|frameless|536x536px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43835001<br /> |STANCHION-POWER<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0511<br /> |BOLT-HHCS-1/2-13 X 3 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |46837014-2<br /> |TOW ARM-COLLECTOR TROLLEY<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |46838015<br /> |SPACER BLOCK-TOW ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW1030<br /> |U-BOLT-3/8-16 X 2&quot; X 5&quot;-SQUARE BEND<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .625&quot; to .750&quot;''<br /> |1<br /> |-<br /> |13<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |HW1051<br /> |EYE BOLT-3/8-16 X 5 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0126<br /> |WASHER-FLAT-3/8&quot;-FENDER<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |BD0010<br /> |TROLLEY-ENERGY RAIL<br /> |<br /> | rowspan=&quot;2&quot; |''Aero-Motive Rail only''<br /> <br /> ''(orange housing color)''<br /> |1<br /> |-<br /> |19<br /> |BD0100<br /> |BRUSH-TROLLEY<br /> |<br /> |4<br /> |}<br /> <br /> ==== '''&lt;big&gt;''Vahle Energy Rail''&lt;/big&gt;''' ====<br /> [[File:BE-TS Vahle Energy Rail.png|alt=BE-TS Vahle Energy Rail|frameless|535x535px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1A<br /> |BD0031<br /> |TROLLEY-ENERGY RAIL, KSL<br /> |<br /> | rowspan=&quot;3&quot; |''† Vahle KSL Rail only''<br /> <br /> ''(green housing color)''<br /> |1<br /> |-<br /> |2A<br /> |BD0040<br /> |BRUSH-PHASE, KSL<br /> |<br /> |3<br /> |-<br /> |3A<br /> |BD0041<br /> |BRUSH-GROUND, KSL<br /> |<br /> |1<br /> |-<br /> |1B<br /> |BD0231<br /> |TROLLEY-ENERGY RAIL, KBH<br /> |<br /> | rowspan=&quot;3&quot; |''† Vahle KBH Rail only''<br /> <br /> ''(gray housing color)''<br /> <br /> ''(Nots shown)''<br /> |1<br /> |-<br /> |2B<br /> |BD0240<br /> |BRUSH-PHASE, KBH<br /> |<br /> |3<br /> |-<br /> |3B<br /> |BD0241<br /> |BRUSH-GROUND, KBH<br /> |<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |4<br /> |BD0030<br /> |TOW ARM-COLLECTOR TROLLEY, KSL<br /> |<br /> |''† Vahle KSL Rail only''<br /> <br /> ''(green housing color)''<br /> |1<br /> |-<br /> |BD0230<br /> |TOW ARM-COLLECTOR TROLLEY, KBH<br /> |<br /> |''† Vahle KBH Rail only''<br /> <br /> ''(gray housing color)''<br /> |1<br /> |-<br /> |5<br /> |46838015<br /> |SPACER-BLOCK-TOW ARM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |6<br /> |41237083-2<br /> |BRACKET-TOW ARM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |7<br /> |HW1054<br /> |U-BOLT-5/16-18 X 2&quot; X 5&quot;-SQUARE BEND<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW0323<br /> |BOLT-HHCS-5/16-18 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0106<br /> |WASHER-FLAT-5/16&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0150<br /> |WASHER-FLAT-5/16&quot;-FENDER<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0105<br /> |WASHER-LOCK-5/16&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0004<br /> |NUT-HEX-5/16-18<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Verify Energy Rail type (KSL OR KBH) by the color of the energy rail housing.'' <br /> |-<br /> | colspan=&quot;6&quot; |''†† Not all units equipped with Tow Arm Bracket. Location of Spacer Block and/or Tow Arm Bracket may vary from configuration shown.'' <br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Control Panel&lt;/big&gt;&lt;/u&gt;''' ===<br /> '''&lt;big&gt;''[Discontinued] Control Panel for Units with 10 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS (Discontinued) Control Panel for Units with 10HP.png|alt=BE-TS (Discontinued) Control Panel for Units with 10HP|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-CONTROL PANEL-16&quot; X 14&quot; X 6&quot;<br /> |<br /> |CONSULT FACTORY<br /> |1<br /> |-<br /> |2<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |Grip size .250&quot; to.375&quot;<br /> |1<br /> |-<br /> |6<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |Grip size .625&quot; to .750&quot;<br /> |2<br /> |-<br /> |7<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |Grip size .500&quot; to .625&quot;<br /> |2<br /> |-<br /> |8<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |''Not shown''<br /> |1<br /> |-<br /> |9<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |''Not shown''<br /> |4<br /> |}<br /> [[File:BE-TS (Discontinued) Control Panel for Units with 10HP Detail.png|alt=BE-TS (Discontinued) Control Panel for Units with 10HP Detail|frameless|556x556px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0640<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |BLANK PANEL WITHOUT HOLES<br /> |1<br /> |-<br /> |2<br /> |E0120<br /> |MAGNETIC STARTER-NEMA 1 3/4&quot;<br /> |<br /> |WITH OVERLOAD<br /> |1<br /> |-<br /> |3<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |<br /> |17<br /> |-<br /> |4<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |<br /> |17<br /> |-<br /> |5<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |17<br /> |-<br /> |6<br /> |E0207-1<br /> |TRANSFORMER<br /> |<br /> |480VAC TO 120VAC, 0.75 Kva<br /> |1<br /> |-<br /> |7<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |HW0003<br /> |NUT-NILN-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |E1023<br /> |WIREWAY<br /> |<br /> |SOLD BY LENGTH<br /> |A/R<br /> |-<br /> |11<br /> |E1024<br /> |MOUNTING TRACK<br /> |<br /> |SOLD BY LENGTH<br /> |A/R<br /> |-<br /> |12<br /> |E1020<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |16<br /> |-<br /> |13<br /> |E1040<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |E1330<br /> |END ANCHOR<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |E0341<br /> |GROUND LUG<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |E0902<br /> |FUSE-6A<br /> |<br /> |FLM-6<br /> |1<br /> |}<br /> <br /> ==== '''&lt;big&gt;''[Current] Control Panel for Units with 20 HP Power Unit''&lt;/big&gt;''' ====<br /> [[File:BE-TS (Current) Control Panel for Units with 20HP.png|alt=BE-TS (Current) Control Panel for Units with 20HP|frameless|601x601px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-24&quot; X 16&quot; X 6&quot;<br /> |<br /> |CONSULT FACTORY<br /> |1<br /> |-<br /> |2<br /> |E0123-1<br /> |HANDLE-DISCONNECT<br /> |<br /> |INCL. MOUNTING SCREWS<br /> |1<br /> |-<br /> |3<br /> |E0662<br /> |RESTRAINT-3/4&quot;-LIQUID TIGHT<br /> |<br /> |INCL. LOCKNUT<br /> |1<br /> |-<br /> |4<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |GRIP SIZE .500&quot; TO .625&quot;<br /> |2<br /> |-<br /> |5<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |GRIP SIZE .625&quot; TO .750&quot;<br /> |1<br /> |-<br /> |6<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |7<br /> |E0661<br /> |RESTRAINT-3/4&quot;-90 DEG-LIQUID TIGHT<br /> |<br /> |INCL. LOCKNUT<br /> |1<br /> |-<br /> |8<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |GRIP SIZE .250&quot; TO .375&quot;<br /> |1<br /> |-<br /> |9<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |GRIP SIZE .450&quot; TO .560&quot;<br /> |2<br /> |-<br /> |10<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |11<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |}<br /> [[File:BE-TS (Current) Control Panel for Units with 20HP Details.png|alt=BE-TS (Current) Control Panel for Units with 20HP Details|frameless|645x645px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |YE0506<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |''Blank panel without holes''<br /> |1<br /> |-<br /> |2<br /> |YE0205-1<br /> |SWITCH-DISCONNECT-80A<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43036007<br /> |SHAFT-DISCONNECT<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |YE0409<br /> |FUSE HOLDER-SINGLE POLE<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |E0914<br /> |FUSE-10A<br /> |<br /> |''FLM-10''<br /> |1<br /> |-<br /> |6<br /> |E0902<br /> |FUSE-6A<br /> |<br /> |''FLM-6''<br /> |1<br /> |-<br /> |7<br /> |E0903<br /> |FUSE-12A<br /> |<br /> |''FLM-12''<br /> |1<br /> |-<br /> |8<br /> |YE0402<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |17<br /> |-<br /> |9<br /> |YE0405<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |YE0406<br /> |END ANCHOR<br /> |<br /> |<br /> |6<br /> |-<br /> |11<br /> |E0136<br /> |FUSE HOLDER-3 POLE<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |YE0901<br /> |FUSE-40A<br /> |<br /> |JTD-40-ID<br /> |3<br /> |-<br /> |13<br /> |E1013<br /> |BASE-RELAY<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |E1012<br /> |RELAY-11 PIN<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |E0137<br /> |FUSE HOLDER-2 POLE<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |YE0902<br /> |FUSE-10A<br /> |<br /> |''KLDR-10''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |17<br /> |N/A<br /> |CONTACTOR, &quot;A40&quot; SERIES<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |E0132-1<br /> |CONTACTOR, &quot;AF38&quot; SERIES<br /> |80332009<br /> |<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |18<br /> |N/A<br /> |OVERLOAD, &quot;TA&quot; SERIES<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |E0131-1<br /> |OVERLOAD, &quot;TF&quot; SERIES<br /> |80332009<br /> |<br /> |1<br /> |-<br /> |19<br /> |E1023<br /> |WIREWAY<br /> |<br /> |''Sold by length''<br /> |A/R<br /> |-<br /> |20<br /> |E0908<br /> |MOUNTING RAIL<br /> |<br /> |''Sold by length''<br /> |A/R<br /> |-<br /> |21<br /> |E1070<br /> |GROUND BAR-4 POSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |22<br /> |E1071<br /> |GROUND BAR-7 POSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |23<br /> |HW1061<br /> |SCREW-RHMS-#8-32 X 1&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |24<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> | rowspan=&quot;3&quot; |''Track and Wireway mounting hardware (Not shown)''<br /> |14<br /> |-<br /> |25<br /> |HW0133<br /> |WASHER-FLAT-#8<br /> |<br /> |14<br /> |-<br /> |26<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |17<br /> |-<br /> |27<br /> |E0139<br /> |AUXILIARY CONTACT BLOCK<br /> |80332009<br /> |''†† See notes''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† &quot;A40&quot; Series Contactor and &quot;TA&quot; Series Overload no longer available as of mid-March 2022. Components must be replaced with current Overload &amp; Relay Kit 80332009.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Auxiliary contact Block required for units equipped with &quot;AF38&quot; Series Contactor &amp; &quot;TF&quot; Series Overload.''<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Transformer&lt;/big&gt;&lt;/u&gt;''' ===<br /> '''&lt;big&gt;''Transformer for Units with 20 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS Transformer for Units with 20HP.png|alt=BE-TS Transformer for Units with 20HP|frameless|554x554px]]<br /> <br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0220<br /> |TRANSFORMER<br /> |<br /> |''480VAC to 120VAC, 3kVA''<br /> |1<br /> |-<br /> |2<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |3<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |7<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |3<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;Operator Console&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Operator Console Electrical.png|alt=BE-TS Operator Console Electrical|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0327<br /> |KEYED ACTUATOR ASSEMBLY<br /> |<br /> |''Includes 2 Keys &amp; Contact Block'' <br /> |1<br /> |-<br /> |2<br /> |E0351<br /> |KEY-REPLACEMENT<br /> |<br /> |''Set of 2 Keys''<br /> |A/R<br /> |-<br /> |3<br /> |E0309-1<br /> |HOUR METER<br /> |<br /> |''† Includes mounting hardware''<br /> |1<br /> |-<br /> |4<br /> |N/A<br /> |SWITCH-SELECTOR-3 POSITION<br /> |<br /> |''ON-OFF-ON, †† See notes''<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |5<br /> |N/A<br /> |LEGEND PLATE-VACUUM<br /> |<br /> |''††† See notes''<br /> |1<br /> |-<br /> |N/A<br /> |LEGEND PLATE-MAGNET<br /> |<br /> |''††† See notes''<br /> |1<br /> |-<br /> |6<br /> |N/A<br /> |CONTACT BLOCK-N/O<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |7<br /> |N/A<br /> |CONTACT BLOCK-N/C<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |8<br /> |E1083<br /> |SWITCH-SELECTOR-3 POSITION<br /> |80232001<br /> |''OFF-ON-OFF''<br /> |1<br /> |-<br /> |9<br /> |E1080<br /> |CONTACT BLOCK-N/O &amp; N/C<br /> |80232001<br /> |<br /> |2<br /> |-<br /> |10<br /> |YE0311<br /> |SWITCH-EMERGENCY STOP<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |YE0407<br /> |LEGEND PLATE-EMERGENCY STOP<br /> |<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Current Hour Meter is 3-Bolt version. Replacement of 4-Bolt version will require new mounting holes to be drilled in dashboard.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Parts no longer available. Must order new Selector Switch Kit 80232001''<br /> |-<br /> | colspan=&quot;6&quot; |''††† Parts no longer available. See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Labels_&amp;_Placards Labels &amp; Placards] section for current Placards''<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;Foot Switch&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Foot Switch Electrical.png|alt=BE-TS Foot Switch Electrical|frameless|701x701px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0301-1<br /> |SWITCH-FOOT OPERATED<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .500&quot; to .625&quot;''<br /> |1<br /> |-<br /> |3<br /> |E0515<br /> |CORD-14-3-SO/SOW<br /> |<br /> |<br /> |9'<br /> |-<br /> |4<br /> |HC0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |''If equipped''<br /> |2<br /> |-<br /> |5<br /> |HC0103<br /> |WASHER-1/4&quot;-LOCK<br /> |<br /> |''If equipped''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Open-Style Switch is a direct replacement for discontinued, Covered-Style Switch.'' <br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''Gate Switch'''&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Gate Switch Electrical.png|alt=BE-TS Gate Switch Electrical|frameless|613x613px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0312<br /> |SWITCH-PUSH BUTTON<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43017041<br /> |MOUNT-GATE SWITCH<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW1077<br /> |SCREW-RHMS-#10-24 X 5/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0307<br /> |BOLT-SHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |PL0502<br /> |GROMMET-3/8&quot; I.D.<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |YE0305<br /> |SWITCH-ROLLER<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |SS0303<br /> |WASHER-FLAT-#8<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |SS0111<br /> |SCREW-SHCS-#8-32 X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |SS0203<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''Proximity Switch'''&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Proximity Switch Electrical.png|alt=BE-TS Proximity Switch Electrical|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0314<br /> |SENSOR-PROXIMITY-30MM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43017027-2<br /> |BRACKET-PROXIMITY SENSOR<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |6<br /> |43017037-2<br /> |ANGLE-PROXIMITY SENSOR TARGET<br /> |<br /> |''Rotary Actuator units'' <br /> |1<br /> |-<br /> |43017084-2<br /> |ANGLE-PROXIMITY SENSOR TARGET<br /> |<br /> |''Helical Actuator units'' <br /> |1<br /> |-<br /> |7<br /> |HW0341<br /> |BOLT-FHSCS-1/4-20 X 5/8&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''120V Receptacle'''&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Proximity Switch Electrical.png|alt=BE-TS Proximity Switch Electrical|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |3<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0650<br /> |RECEPTACLE-DUPLEX<br /> |<br /> |''† 20A''<br /> |1<br /> |-<br /> |5<br /> |E0651<br /> |COVER-RECEPTACLE-DUPLEX<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0655<br /> |RECEPTACLE-GFCI<br /> |<br /> |''20A''<br /> |1<br /> |-<br /> |7<br /> |E0656<br /> |COVER-RECEPTACLE-GFCI<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |E0654<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |E0657<br /> |COVER-RECEPTACLE-DUPLEX/GFCI<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |''Mounting hardware (Not shown)''<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† If Duplex Receptacle has Split Feed (1 set of black &amp; white wires for each plug), the Break-Off Fin must be removed prior to installation.'' <br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''Console Enclosure'''&lt;/big&gt;&lt;/u&gt; ===<br /> <br /> ==== '''&lt;big&gt;''[Discontinued] Operator Console Enclosure for Units with 10 HP Power Unit''&lt;/big&gt;''' ====<br /> [[File:BE-TS (Discontinued) Operator Console Enclosure for Units with 10 HP Power Unit.png|alt=BE-TS (Discontinued) Operator Console Enclosure for Units with 10 HP Power Unit|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-6&quot; X 6&quot; X 4 &quot;<br /> |<br /> |''Consult factory''<br /> |1<br /> |-<br /> |2<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |3<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |4<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |5<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |8<br /> |43817087-2<br /> |BRACKET-MOUNTING-ENCLOSURE<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> | rowspan=&quot;4&quot; |''Mounting bracket hardware (Not shown)''<br /> |2<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |2<br /> |}<br /> '''&lt;big&gt;''[Discontinued] Operator Console Enclosure Panel for Units with 10 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS (Discontinued) Operator Console Enclosure Panel for Units with 10 HP Power Unit.png|alt=BE-TS (Discontinued) Operator Console Enclosure Panel for Units with 10 HP Power Unit|frameless|566x566px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0639<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |''Without holes''<br /> |1<br /> |-<br /> |2<br /> |E1024<br /> |TRACK-TERMINAL BLOCK<br /> |<br /> |''4 7/8&quot; LG''<br /> |1<br /> |-<br /> |3<br /> |E1020<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |9<br /> |-<br /> |4<br /> |E1330<br /> |END ANCHOR<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |E1040<br /> |END BARRIER<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0341<br /> |GROUND LUG<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |''2 for track mounting''<br /> |3<br /> |-<br /> |8<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |''2 for track mounting''<br /> |3<br /> |-<br /> |9<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |''2 for track mounting''<br /> |3<br /> |}<br /> '''&lt;big&gt;''[Current] Operator Console Enclosure for Units with 20 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS (Current) Operator Console Enclosure for Units with 20 HP Power Unit.png|alt=BE-TS (Current) Operator Console Enclosure for Units with 20 HP Power Unit|frameless|549x549px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-8&quot; X 8&quot; X 4&quot;<br /> |<br /> |''Consult factory''<br /> |1<br /> |-<br /> |2<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |3<br /> |-<br /> |3<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .625&quot; to .750&quot;''<br /> |1<br /> |-<br /> |4<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''† Grip size .450&quot; to .560&quot;''<br /> |4<br /> |-<br /> |5<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''†'' ''Grip size .250&quot; to .375&quot;''<br /> |4<br /> |-<br /> |6<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |11<br /> |-<br /> |7<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |E1349<br /> |SEAL-KNOCKOUT-1/2&quot;<br /> |<br /> |''† See notes''<br /> |A/R<br /> |-<br /> |9<br /> |43037003-2<br /> |BRACKET-MOUNTING-ENCLOSURE<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> | rowspan=&quot;4&quot; |''Mounting bracket hardware (Not shown)''<br /> |2<br /> |-<br /> |12<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |2<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Restraints sold for machines equipped with all available options. Machines built without certain options will have Knockout Seals (Item #8) installed in place of restraints.''<br /> |}<br /> '''&lt;big&gt;''[Current] Operator Console Enclosure Panel for Units with 20 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS (Current) Operator Console Enclosure Panel for Units with 20 HP Power Unit.png|alt=BE-TS (Current) Operator Console Enclosure Panel for Units with 20 HP Power Unit|frameless|527x527px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0135<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |''Blank panel without holes''<br /> |1<br /> |-<br /> |2<br /> |E0908<br /> |MOUNTING RAIL<br /> |<br /> |''Sold by length''<br /> |A/R<br /> |-<br /> |3<br /> |YE0402<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |14<br /> |-<br /> |4<br /> |YE0405<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |YE0406<br /> |END ANCHOR<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |E1074<br /> |JUMPER-2 POLE<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |E0130<br /> |GROUND BAR-7 POSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW1061<br /> |SCREW-RHMS-#8-32 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> | rowspan=&quot;3&quot; |''Track and Wireway mounting hardware (Not shown)''<br /> |2<br /> |-<br /> |10<br /> |HW0133<br /> |WASHER-FLAT-#8<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |4<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''Junction Box'''&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Junction Box.png|alt=BE-TS Junction Box|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |2<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |3<br /> |-<br /> |3<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .500&quot; to .625&quot;''<br /> |4<br /> |-<br /> |4<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .625&quot; to .750&quot;''<br /> |2<br /> |-<br /> |5<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Top Module Junction Box&lt;/big&gt;''''' ====<br /> [[File:BE-TS Junction Box.png|alt=BE-TS Junction Box|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1329<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0662<br /> |RESTRAINT-3/4&quot;-LIQUID TIGHT<br /> |<br /> |''Includes Locknut'' <br /> |1<br /> |-<br /> |3<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .625&quot; to .750&quot;''<br /> |1<br /> |-<br /> |4<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Wiring Diagrams&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;BE-TS with 10 HP Motor Wiring Diagram&lt;/big&gt;''''' ====<br /> [[File:BE-TS Wiring Diagram-10HP Motor.png|alt=BE-TS Wiring Diagram-10HP Motor|frameless|800x800px]]<br /> <br /> ==== '''''&lt;big&gt;BE-TS with Magnet and 10 HP Motor Wiring Diagram&lt;/big&gt;''''' ====<br /> [[File:BE-TS with Magnet and 10HP Motor Wiring Diagram.png|alt=BE-TS with Magnet and 10HP Motor Wiring Diagram|frameless|800x800px]]<br /> <br /> ==== '''''&lt;big&gt;BE-TS with Magnet and 20 HP Motor Wiring Diagram&lt;/big&gt;''''' ====<br /> [[File:BE-TS Magnet Wiring Diagram-20HP Motor.png|alt=BE-TS Magnet Wiring Diagram-20HP Motor|frameless|800x800px]]<br /> <br /> [[File:BE-TS Magnet Wiring Diagram-20HP Motor-02.png|alt=BE-TS Magnet Wiring Diagram-20HP Motor-02|frameless|800x800px]]<br /> <br /> [[File:BE-TS Magnet Wiring Diagram-20HP Motor-03.png|alt=BE-TS Magnet Wiring Diagram-20HP Motor-03|frameless|800x800px]]<br /> <br /> [[File:BE-TS Magnet Wiring Diagram-20HP Motor-04.png|alt=BE-TS Magnet Wiring Diagram-20HP Motor-04|frameless|800x800px]]<br /> <br /> == &lt;big&gt;Hydraulics&lt;/big&gt; ==<br /> <br /> === '''&lt;big&gt;&lt;u&gt;[Discontinued] 10 HP Power Unit&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:(Discontinued) BE-TS Power Unit (10HP).png|alt=(Discontinued) BE-TS Power Unit (10HP)|frameless|553x553px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0011<br /> |MOTOR-ELECTRIC-10HP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0326<br /> |ADAPTER-PUMP TO MOTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0325<br /> |PUMP-VANE-16 GPM<br /> |<br /> |''Variable displacement''<br /> |1<br /> |-<br /> |4<br /> |HC0327<br /> |COUPLING BODY-1 3/8&quot;<br /> |<br /> |''Motor end''<br /> |1<br /> |-<br /> |5<br /> |HC0329<br /> |SPIDER-COUPLING INSERT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HC0328<br /> |COUPLING BODY-7/8&quot;<br /> |<br /> |''Pump end''<br /> |1<br /> |-<br /> |7<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1 1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H1549<br /> |ADAPTER-#20 JICM X #24 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |H1595<br /> |ADAPTER-90 DEG-#20 JICM X #20 JICSW<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |H1609<br /> |ADAPTER-90 DEG-#12 JICM X #16 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |H1522<br /> |ADAPTER-#12 JICSW X #12 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |HC0260<br /> |VALVE-MAIN SYSTEM RELIEF<br /> |<br /> |<br /> |1<br /> |-<br /> |15a<br /> |43846003<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''†† For Item 15 (Not shown)''<br /> |A/R<br /> |-<br /> |16<br /> |HC0318<br /> |GAUGE-PRESSURE<br /> |<br /> |<br /> |1<br /> |-<br /> |17<br /> |H0206<br /> |PLUG-#4 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |H1108<br /> |ADAPTER-#10 JICM X #12 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |H1522<br /> |ADAPTER-#12 JICSW X #12 SAEM<br /> |<br /> |''† See note''<br /> |1<br /> |-<br /> |20<br /> |H1542<br /> |ADAPTER-#12 JICM X #12 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |21<br /> |HC0280<br /> |VALVE-CHECK<br /> |<br /> |''† See note''<br /> |1<br /> |-<br /> |22<br /> |H1542<br /> |ADAPTER-#12 JICM X #12 SAEM<br /> |<br /> |''† See note''<br /> |1<br /> |-<br /> |23<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .500&quot; to .625&quot;''<br /> |1<br /> |-<br /> |23a<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |''For Item 23 (Not shown)''<br /> |1<br /> |-<br /> |24<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |25<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |26<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |27<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Parts noted used on units built after April 2001.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Cartridges are for replacement only.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;[Discontinued] 30 Gallon Reservoir&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:(Discontinued) BE-TS 30 Gallon Reservoir.png|alt=(Discontinued) BE-TS 30 Gallon Reservoir|frameless|542x542px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43842001<br /> |RESERVOIR-VERTICAL-30 GAL<br /> |<br /> |''Includes Items 1 through 8''<br /> |1<br /> |-<br /> |1<br /> |HC0542<br /> |GASKET-CHANNEL<br /> |<br /> |''Sold by length''<br /> |7'<br /> |-<br /> |2<br /> |HC0340<br /> |GAUGE-SIGHT<br /> |<br /> |''with Thermometer''<br /> |1<br /> |-<br /> |3<br /> |HC0306<br /> |STRAINER-SUCTION<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HC0308<br /> |FILLER/BREATHER ASSEMBLY<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0209<br /> |SCREW-RHMS-10-32 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |BI0110<br /> |ELBOW-STR-90 DEG-#16 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |8<br /> |H0208<br /> |PLUG-#12 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1590<br /> |ADAPTER-90 DEG-#16 JICM X #16 FNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |BI0102<br /> |ELBOW-#12 FNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |BI0020<br /> |NIPPLE-#12 NPT X 3&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |BI0301<br /> |TEE-#12 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |H1502<br /> |ADAPTER-#8 JICM X #12 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |BI0002<br /> |NIPPLE-CLOSE-#12 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HC0307<br /> |RETURN LINE FILTER ASSEMBLY<br /> |<br /> |''Housing and Filter''<br /> |1<br /> |-<br /> |16<br /> |HC0317<br /> |FILTER-RETURN LINE<br /> |<br /> |''Replacement filter''<br /> |1<br /> |-<br /> |17<br /> |H1509<br /> |ADAPTER-#10 JICM X #12 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> | rowspan=&quot;4&quot; |''Mounting hardware''<br /> <br /> ''(Not shown)''<br /> |4<br /> |-<br /> |19<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |8<br /> |-<br /> |20<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |4<br /> |-<br /> |21<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;[Current] Power Unit (20 HP)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:(Current) BE-TS 30 Power Unit (20 HP).png|alt=(Current) BE-TS 30 Power Unit (20 HP)|frameless|531x531px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0040<br /> |MOTOR-ELECTRIC-20 HP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0357<br /> |ADAPTER-PUMP TO MOTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0356<br /> |PUMP-PISTON-71CC<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HC0358-M<br /> |COUPLING BODY-M300-1 5/8&quot; BORE<br /> |<br /> |''MOTOR SIDE''<br /> |1<br /> |-<br /> |5<br /> |HC0358-I<br /> |SPIDER-COUPLING INSERT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HC0358-P<br /> |COUPLING BODY-M300-1 1/4&quot; BORE<br /> |<br /> |''PUMP SIDE''<br /> |1<br /> |-<br /> |7<br /> |HW0602<br /> |BOLT-HHCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0113<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |H1604<br /> |ADAPTER-90 DEG-#12 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HC0363<br /> |ADAPTER-FLANGE-#32 NPT<br /> |<br /> |''Includes O-ring''<br /> |1<br /> |-<br /> |11<br /> |HC0240<br /> |BLOCK-CHECK VALVE<br /> |<br /> |''Includes Cartridge &amp; O-ring''<br /> |1<br /> |-<br /> |12<br /> |N/A<br /> |CARTRIDGE-CHECK VALVE<br /> |<br /> |''† Replacement cartridge''<br /> |A/R<br /> |-<br /> |13<br /> |H0300<br /> |ELBOW-STR-90 DEG-#4 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |HC0318<br /> |GAUGE-PRESSURE<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |HE0704<br /> |ADAPTER-SPLIT FLANGE-1&quot;<br /> |<br /> |''2-Piece adapter with O-ring''<br /> |1<br /> |-<br /> |16<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |H0211<br /> |ADAPTER-#24 NPT X #12<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |E0661<br /> |RESTRAINT-3/4&quot;-90 DEG-LIQUID TIGHT<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |HW0513<br /> |BOLT-HHCS-1/2-13 X 2 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |20<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |21<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTE<br /> |-<br /> | colspan=&quot;6&quot; |''† Consult factory''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;[Current] 45 Gallon Reservoir&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:(Current) BE-TS 45 Gallon Reservoir.png|alt=(Current) BE-TS 45 Gallon Reservoir|frameless|547x547px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43842010<br /> |45 GAL RESERVOIR ASSEMBLY<br /> |<br /> |''Includes Items 1 through 7''<br /> |A/R<br /> |-<br /> |1<br /> |43848005<br /> |PLATE-COVER<br /> |<br /> |''† See note''<br /> |1<br /> |-<br /> |2<br /> |HC0308<br /> |FILLER/BREATHER ASSEMBLY<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0209<br /> |SCREW-RHMS-10-32 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |4<br /> |HC0340<br /> |GAUGE-SIGHT<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H0208<br /> |PLUG-#12 NPT<br /> |<br /> |''Non-IIoT equipped units only''<br /> |1<br /> |-<br /> |6<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |7<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |8<br /> |HC0361<br /> |HOUSING-FILTER<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HC0354<br /> |CARTRIDGE-FILTER<br /> |<br /> |''10 Micron filtration''<br /> |1<br /> |-<br /> |10<br /> |HC0362<br /> |FLANGE-SUCTION TUBE<br /> |<br /> |''Includes hardware''<br /> |1<br /> |-<br /> |11<br /> |43848008<br /> |TUBE-SUCTION<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |H1569<br /> |ADAPTER-45 DEG-#12 JICM X #12 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |H0202<br /> |REDUCER-#24 SAE X #12 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |H1622<br /> |ADAPTER-90 DEG-#12 SAEM X #12 JICM<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |H1644<br /> |PLUG-#24 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |H1610<br /> |ADAPTER-45 DEG-#12 JICSW X #12 JICM<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |PB0311-1<br /> |NIPPLE-#12 NPT X 2&quot;-BRASS<br /> |<br /> | rowspan=&quot;3&quot; |''†† See notes''<br /> |1<br /> |-<br /> |20<br /> |BI0301<br /> |TEE-#12 FNPT<br /> |<br /> |1<br /> |-<br /> |21<br /> |H1502<br /> |ADAPTER-#8 JICM X #12 MNPT<br /> |<br /> |2<br /> |-<br /> |22<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> | rowspan=&quot;5&quot; |''Reservoir mounting hardware'' <br /> <br /> ''(Not shown)''<br /> |2<br /> |-<br /> |23<br /> |HW0405<br /> |BOLT-HHCS-3/8-16 X 2&quot;<br /> |<br /> |2<br /> |-<br /> |24<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |8<br /> |-<br /> |25<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |4<br /> |-<br /> |26<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† RVT silicone required to seal cover plate after removal.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Components required for units equipped with radial piston drive wheel motors plumbed with case drain hoses. See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Drive_Wheel_Assembly Drive Wheel Assembly] section.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Valve Assembly&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Lift Valve and Manifold Detail&lt;/big&gt;''''' ====<br /> [[File:BE-TS Lift Valve and Manifold.png|alt=BE-TS Lift Valve and Manifold|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |80342001<br /> |LEVER VALVE RETRO KIT<br /> |<br /> |''† Required prior to 2006'' <br /> |A/R<br /> |-<br /> |1<br /> |HC0257<br /> |VALVE-LEVER<br /> |<br /> |''Effective from 2006 to Present''<br /> |1<br /> |-<br /> |2<br /> |HC0252<br /> |MANIFOLD-D05-1 BANK<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0318<br /> |BOLT-SHCS-1/4-20 X 1 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |H1642<br /> |PLUG-#12 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H1542<br /> |ADAPTER-#12 JICM X #12 SAEM<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HC0248<br /> |FIXED FLOW REGULATOR<br /> |<br /> |''††14 GPM''<br /> |1<br /> |-<br /> |12<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |13<br /> |H1540<br /> |ADAPTER-#8 JICM X #8 SAEM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |14<br /> |43817085<br /> |PLATE-ADAPTER-VALVE<br /> |<br /> |''† Not shown''<br /> |1<br /> |-<br /> |15<br /> |SS0104<br /> |BOLT-SHCS-1/4-20 X 5/8&quot;-SST<br /> |<br /> |''† Not shown''<br /> |4<br /> |-<br /> |16<br /> |SS0300<br /> |WASHER-FLAT-1/4&quot;-SAE-SST<br /> |<br /> |''† Not shown''<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |<br /> |-<br /> | colspan=&quot;6&quot; |''† Kit includes Items 1 &amp; 14 through 16. Minor modifications to the dash board required.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† For units shipped April 2017 to present''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Floor Drive / Arm Rotation Valve and Manifold Detail&lt;/big&gt;''''' ====<br /> [[File:BE-TS Floor Drive-Arm Rotation Valve and Manifold.png|alt=BE-TS Floor Drive-Arm Rotation Valve and Manifold|frameless|570x570px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0233<br /> |VALVE-LEVER<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HC0251<br /> |MANIFOLD-D03-2 BANK<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1545<br /> |ADAPTER-#10 JICM X #10 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |H1600<br /> |ADAPTER-90 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |H1587<br /> |ADAPTER-#6 JICSW X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HC0211<br /> |VALVE-ADJUSTABLE FLOW CONTROL<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |H1504<br /> |ADAPTER-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |H1640<br /> |PLUG-#6 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |43817033-2<br /> |RISER PLATE<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |14<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |HC0233-SK<br /> |SEAL KIT<br /> |<br /> |''For Item 1 (Not shown)''<br /> |A/R<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Valve Assembly&lt;/big&gt;''''' ====<br /> [[File:BE-TS Valve Assembly.png|alt=BE-TS Valve Assembly|frameless|538x538px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0233<br /> |VALVE-LEVER<br /> |<br /> |<br /> |3<br /> |-<br /> |2<br /> |HC0250<br /> |MANIFOLD-D03-3 BANK<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1610<br /> |ADAPTER-90 DEG-#10 JICM X #10 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |H1641<br /> |PLUG-#10 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H1000<br /> |ADAPTER-#8 SAEM X #4 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |H0001<br /> |NIPPLE-#4 NPT<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HC0247<br /> |FIXED FLOW REGULATOR-2.25 GPM<br /> |<br /> |''† See notes''<br /> |4<br /> |-<br /> |8<br /> |H1504<br /> |ADAPTER-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |H1640<br /> |PLUG-#6 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |H1540<br /> |ADAPTER-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |43817034-2<br /> |RISER PLATE<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |14<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |15<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HC0233-SK<br /> |SEAL KIT<br /> |<br /> |''For Item 1 (Not shown)''<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Units built prior to January 2107 equipped with Adjustable Flow Controls. Fixed Flow Regulators are direct replacement for Adjustable Flow Controls.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Lift Cylinder&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Lift Cylinder.png|alt=BE-TS Lift Cylinder|frameless|582x582px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43822006<br /> |CLEVIS ASSEMBLY<br /> |<br /> |''Sold as assembly only''<br /> |4<br /> |-<br /> |2<br /> |HW0813<br /> |SCREW-SHSS-3/8-16 X 1/2&quot;<br /> |<br /> |''Nylon tipped''<br /> |8<br /> |-<br /> |3<br /> |HC0420<br /> |CYLINDER-LIFT<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |H1645<br /> |ADAPTER-90 DEG-#8 SAEM X #6 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |H0212<br /> |ADAPTER-#6 NPT X #8 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HC0425<br /> |VELOCITY FUSE<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Lift Circuit&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Lift Circuit.png|alt=BE-TS Lift Circuit|frameless|553x553px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43017014-2<br /> |SUPPORT-PILOT DOWN MANIFOLD<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43718008<br /> |STANDOFF<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0315<br /> |BOLT-HHCS-1/4-20 X 4 1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |10<br /> |-<br /> |7<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |5<br /> |-<br /> |8<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |5<br /> |}<br /> <br /> ==== '''''&lt;big&gt;[Discontinued] Lift Circuit Configuration&lt;/big&gt;''''' ====<br /> [[File:(Discontinued) BE-TS Lift Circuit Configuration.png|alt=(Discontinued) BE-TS Lift Circuit Configuration|frameless|507x507px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |H1507<br /> |ADAPTER-#8 JICM X #8 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0264<br /> |VALVE-CHECK-PILOT TO OPEN<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H1621<br /> |ADAPTER-#4 SAEM X #2 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HC0269<br /> |VALVE-ADJUSTABLE FLOW CONTROL<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |H1591<br /> |ADAPTER-90 DEG-#6 JICM X #2 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |H1587<br /> |ADAPTER-#6 JICSW X #4 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1501<br /> |ADAPTER-#8 JICM X #6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43047002<br /> |MANIFOLD-PILOT DOWN<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> ==== '''''&lt;big&gt;[Current] Lift Circuit Configuration&lt;/big&gt;''''' ====<br /> [[File:(Current) BE-TS Lift Circuit Configuration.png|alt=(Current) BE-TS Lift Circuit Configuration|frameless|534x534px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0215<br /> |VALVE-CHECK-CARTRIDGE<br /> |<br /> |<br /> |8<br /> |-<br /> |2<br /> |H1560<br /> |ADAPTER-45 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |H1670<br /> |ADAPTER-45 DEG-#12 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |H1612<br /> |ADAPTER-90 DEG-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HC0283<br /> |VALVE-COUNTER BALANCE<br /> |<br /> |''Includes cartridge''<br /> |1<br /> |-<br /> |6<br /> |43846004<br /> |CARTRIDGE-COUNTER BALANCE<br /> |<br /> |''Replacement cartridge''<br /> |A/R<br /> |-<br /> |7<br /> |H1552<br /> |ADAPTER-#6 JICM X #6 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |H1587<br /> |ADAPTER-#6 JICSW X #4 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1501<br /> |ADAPTER-#8 JICM X #6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43047002<br /> |MANIFOLD-PILOT DOWN<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Cartridges are for replacement only''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Down-Speed Flow Control&lt;/big&gt;''''' ====<br /> [[File:BE-TS Down-Speed Flow Control.png|alt=BE-TS Down-Speed Flow Control|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0270<br /> |VALVE-ADJUSTABLE FLOW CONTROL<br /> |<br /> |''Pressure compensated''<br /> |1<br /> |-<br /> |2<br /> |H0007<br /> |NIPPLE-#8 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1647<br /> |ADAPTER-90 DEG-#10 SAEM X #8 FNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |H1680<br /> |ADAPTER-#10 JICM X #8 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H1690<br /> |ADAPTER-#10 JICSW X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HC0248<br /> |FIXED FLOW REGULATOR<br /> |<br /> |''14 GPM''<br /> |1<br /> |-<br /> |7<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |H1612<br /> |ADAPTER-90 DEG-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1547<br /> |ADAPTER-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Cross Port Relief&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Mounting Configuration&lt;/big&gt;''''' ====<br /> [[File:BE-TS Cross Port Relief Mounting Configuration.png|alt=BE-TS Cross Port Relief Mounting Configuration|frameless|546x546px]]<br /> {| class=&quot;wikitable&quot;<br /> ! colspan=&quot;6&quot; |UNITS BUILT PRIOR TO SEPTEMBER, 2014<br /> |-<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> ! colspan=&quot;6&quot; |UNITS BUILT SEPTEMBER, 2014 TO DECEMBER, 2014<br /> |-<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW0305<br /> |BOLT-HHCS-1/4-20 X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |7<br /> |43058004<br /> |PLATE-SPACER<br /> |<br /> |<br /> |1<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> ! colspan=&quot;6&quot; |UNITS BUILT DECEMBER, 2014 TO PRESENT<br /> |-<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |2<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |}<br /> ''NOTE: Effectivity dates refer to dates new extractor units shipped from the factory. Replacement part effectivity may differ due to factory inventory levels at time of parts order. Consult factory if unsure of parts needed.''<br /> <br /> ==== '''''&lt;big&gt;Components&lt;/big&gt;''''' ====<br /> [[File:BE-TS Cross Port Relief Components.png|alt=BE-TS Cross Port Relief Components|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0262<br /> |VALVE-CROSS PORT RELIEF<br /> |<br /> |''Includes cartridges''<br /> |1<br /> |-<br /> |2<br /> |43046002<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''For Item 1''<br /> |A/R<br /> |-<br /> |3<br /> |H1540<br /> |ADAPTER-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |H1507<br /> |ADAPTER-#8 JICM X #8 MNPT<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |HC0239<br /> |VALVE-ADJUSTABLE FLOW CONTROL<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |H1568<br /> |ADAPTER-45 DEG-#8 JICM X #8 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |H1646<br /> |ADAPTER-90 DEG-#8 SAEM X #6 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |H0805<br /> |TEE-#6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HC0273<br /> |REGULATOR-FIXED FLOW<br /> |<br /> |''7.0 GPM''<br /> |4<br /> |-<br /> |11<br /> |H1501<br /> |ADAPTER-#8 JICM X #6 MNPT<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Floor Drive Cutout&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Floor Drive Cutout.png|alt=BE-TS Floor Drive Cutout|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |SOLENOID-DRIVE CUTOUT<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |7<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |BI0001<br /> |NIPPLE-CLOSE-#8 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |N/A<br /> |SOLENOID-DRIVE CUTOUT<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |10<br /> |YE0501<br /> |CONNECTOR-SOLENOID<br /> |<br /> |''DIN 43650''<br /> |1<br /> |-<br /> |11<br /> |43058004<br /> |PLATE-SPACER<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |HC0278-TS/QS<br /> |SOLENOID-DRIVE CUTOUT<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |H1547<br /> |ADAPTER-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |H1612<br /> |ADAPTER-90 DEG-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Part obsolete. Must be replaced with Retro Kit Part # 80242007.''<br /> |-<br /> | colspan=&quot;6&quot; |''NOTE: Effectivity dates refer to dates new extractor units shipped from the factory. Replacement part effectivity may differ due to factory inventory levels at time of parts order. Consult factory if unsure of parts needed.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Counter Balance Valve&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Counter Balance Valve.png|alt=BE-TS Counter Balance Valve|frameless|554x554px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0263<br /> |VALVE-COUNTER BALANCE<br /> |<br /> |<br /> |1<br /> |-<br /> |1a<br /> |43046004<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''† For Item 1 (Not shown)''<br /> |A/R<br /> |-<br /> |2<br /> |H1615<br /> |ADAPTER-90 DEG-#6 JICM X #6 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |H1552<br /> |ADAPTER-#6 JICM X #6 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0305<br /> |BOLT-HHCS-1/4-20 X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Cartridges are for replacement only''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Transition Plate&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Transition Plate.png|alt=BE-TS Transition Plate|frameless|576x576px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817067-2<br /> |PLATE-TRANSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |H0020<br /> |UNION-BULKHEAD-45 DEG-#6 JICM<br /> |<br /> |<br /> |8<br /> |-<br /> |3<br /> |H0021<br /> |NUT-BULKHEAD-#6 JIC<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Return Line Manifold&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Return Line Manifold.png|alt=BE-TS Return Line Manifold|frameless|555x555px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43847001<br /> |MANIFOLD-RETURN LINE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |H1501<br /> |ADAPTER-#8 JICM X #6 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1503<br /> |ADAPTER-#12 JICM X #12 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |43817069-2<br /> |BRACKET-BULKHEAD<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |H0015<br /> |UNION-BULKHEAD-90 DEG-#12 JICM<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H0016<br /> |NUT-BULKHEAD-#12 JIC<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;EQ Chain Hose Guard&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS EQ Chain Hose Guard.png|alt=BE-TS EQ Chain Hose Guard|frameless|577x577px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43017074-2<br /> |GUARD-HOSE-EQ CHAIN<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Used on units manufactured after May 2015.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Hydraulic Schematics&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Hydraulic Schematic.png|alt=BE-TS Hydraulic Schematic|frameless|1180x1180px]]<br /> <br /> ==== '''''&lt;big&gt;Extended Reach Hydraulic Schematics&lt;/big&gt;''''' ====<br /> [[File:BE-TS Hydraulic Schematic Extended Reach.png|alt=BE-TS Hydraulic Schematic Extended Reach|frameless|905x905px]]<br /> <br /> == &lt;big&gt;Standard Available Options&lt;/big&gt; ==<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Strobe &amp; Alarm&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''&lt;big&gt;''[Discontinued] Strobe Light &amp; Stanchion Configuration''&lt;/big&gt;''' ====<br /> [[File:(Discontinued) BE-TS Strobe Light.png|alt=(Discontinued) BE-TS Strobe Light|frameless|722x722px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0317<br /> |STROBE LIGHT<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41215014<br /> |STANCHION<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0401<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |E1010<br /> |RECEPTACLE-TWIST LOCK<br /> |<br /> |''(Not shown)''<br /> |1<br /> |-<br /> |7<br /> |E1011<br /> |PLUG-TWIST LOCK<br /> |<br /> |''(Not shown)''<br /> |1<br /> |}<br /> <br /> ==== '''&lt;big&gt;''[Discontinued] Audible Alarm Configuration''&lt;/big&gt;''' ====<br /> [[File:(Discontinued) BE-TS Audible Alarm.png|alt=(Discontinued) BE-TS Audible Alarm|frameless|490x490px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0317-A<br /> |AUDIBLE ALARM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0654<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |00117101-2<br /> |MOUNTING BRACKET<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |5<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> ==== '''&lt;big&gt;''[Current] Stack Light Strobe &amp; Alarm Configuration''&lt;/big&gt;''' ====<br /> [[File:(Current) BE-TS Stack Light Strobe and Alarm Configuration.png|alt=(Current) BE-TS Stack Light Strobe and Alarm Configuration|frameless|844x844px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0362<br /> |MOUNTING BASE<br /> |<br /> |''Includes restraints''<br /> |1<br /> |-<br /> |2<br /> |E0365<br /> |TERMINAL BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0363<br /> |STROBE LIGHT-AMBER-120VAC<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |4<br /> |E0364<br /> |AUDIBLE ALARM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |5<br /> |SS0118<br /> |SCREW-SHCS-#8-32 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |SS0303<br /> |WASHER-FLAT-#8<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |SS0203<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |E1010<br /> |RECEPTACLE-TWIST LOCK<br /> |<br /> |''(Not shown)''<br /> |1<br /> |-<br /> |9<br /> |E1011<br /> |PLUG-TWIST LOCK<br /> |<br /> |''(Not shown)''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† For units not equipped with the audible alarm option, a cap (not shown) mounts on top of the strobe light in place of the audible alarm. Cap included with base.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† For units not equipped with the strobe light option, the audible alarm mounts directly to the terminal base in place of the strobe light.'' <br /> |}<br /> <br /> ==== '''&lt;big&gt;''Strobe &amp; Alarm Mounting''&lt;/big&gt;''' ====<br /> [[File:BE-TS Strobe and Alarm Mounting.png|alt=BE-TS Strobe and Alarm Mounting|frameless|516x516px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41235060<br /> |STACK LIGHT STANCHION<br /> |<br /> |''Discontinued''<br /> |A/R<br /> |-<br /> |2<br /> |HW0401<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |3<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |4<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |REF<br /> |43032006<br /> |STANCHION ASSEMBLY<br /> |<br /> |''Includes items 5 through 8''<br /> |A/R<br /> |-<br /> |5<br /> |43035003<br /> |STACK LIGHT STANCHION<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43037007-2<br /> |CLAMP BRACKET<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0305<br /> |BOLT-HHCS-1/4-20 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0050<br /> |NUT-FLANGED-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |43037004-2<br /> |MOUNTING BRACKET<br /> |<br /> |''Overhead Guard only''<br /> |1<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Horn&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Horn.png|alt=BE-TS Horn|frameless|565x565px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |YE0308<br /> |BUTTON-HORN<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0317-A<br /> |AUDIBLE ALARM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0654<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |00117101-2<br /> |MOUNTING BRACKET<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |11<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Overhead Guard&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Overhead Guard.png|alt=BE-TS Overhead Guard|frameless|530x530px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817119-2<br /> |GUARD-SIDE<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |2<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0406<br /> |BOLT-HHCS-3/8-16 X 2-1/2&quot;<br /> |<br /> |<br /> |5<br /> |-<br /> |5<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |6<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |<br /> |<br /> |5<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Side Guards used on units built November 2013 to Present. Mounting hardware valid for all units with Removable Overhead Guard.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Operator Sheild&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''&lt;big&gt;''[Current] Operator Shield''&lt;/big&gt;''' ====<br /> [[File:(Current) BE-TS 30 Operator Sheild.png|alt=(Current) BE-TS 30 Operator Sheild|frameless|566x566px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43814025<br /> |OPERATOR SHIELD<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |HC0542<br /> |GASKET EDGING<br /> |<br /> |''(2) @ 38&quot; LG, (1) @ 60&quot; LG''<br /> |136&quot;<br /> |-<br /> |3<br /> |43817116-2<br /> |BRACKET-TOP<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |1412FSW<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |43817117-2<br /> |BRACKET-CENTER SUPPORT-OUTSIDE<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43817118-2<br /> |BRACKET-CENTER SUPPORT-INSIDE<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |SS0114<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |8<br /> |SS0502<br /> |LANYARD-8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |SS0501<br /> |PIN-QUICK RELEASE-3/16&quot; X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Consult factory for units built prior to November 2013 with plexiglass bolted directly to Overhead Guard structure on front and sides.'' <br /> |}<br /> <br /> ==== '''&lt;big&gt;''Operator Shield (Used Prior to November 2013)''&lt;/big&gt;''' ====<br /> [[File:BE-TS Operator Shield (Used Prior to November 2013).png|alt=BE-TS Operator Shield (Used Prior to November 2013)|frameless|559x559px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43717116<br /> |SHIELD-OPERATOR<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |43015010<br /> |FRAME-OPERATOR SHIELD WELDMENT<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43017066-2<br /> |SUPPORT-SIDE<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |43017065-2<br /> |SUPPORT-LOWER<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43017067-2<br /> |SUPPORT-UPPER<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |7<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |32<br /> |-<br /> |8<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |9<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |16<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Consult factory for units with plexiglass bolted directly to frame.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Powered Roller Cutout&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Powered Roller Cutout Photo Eye &amp; Reflector Locations (Prior to May 2022)&lt;/big&gt;''''' ====<br /> [[File:BE-TS Powered Roller Cutout Photo Eye &amp; Reflector Locations.png|alt=BE-TS Powered Roller Cutout Photo Eye &amp; Reflector Locations|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1321A<br /> |PHOTO EYE<br /> |<br /> |''† Polarized''<br /> |1<br /> |-<br /> |2<br /> |41217170-2<br /> |MOUNT-PHOTO EYE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0216<br /> |SCREW-#10-24 X 2&quot;<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |4<br /> |HW0032<br /> |NUT-NILN-#10-24<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |E1321-R<br /> |REFLECTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |41217171<br /> |MOUNT-REFLECTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |SS0803<br /> |SCREW-RHMS-#6-32 X 5/8&quot;<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |8<br /> |SS0125<br /> |BOLT-HHCS-1/4-20 X 5/8&quot;<br /> |<br /> |''††† See notes''<br /> |4<br /> |-<br /> |9<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''Quantities provided are for Single-Sided (PRC-1) Power Roller Cutout option. For units with Double Sided (PRC-2) option, quantities are double.''<br /> |-<br /> | colspan=&quot;6&quot; |''† Polarized Photo Eye recommended to prevent potential operational issues with very smooth or shiny battery cases.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Photo Eye &amp; Reflector mounting screws are trimmed to length.''<br /> |-<br /> | colspan=&quot;6&quot; |''††† Photo Eye &amp; Reflector Bracket Mounting Screws may be required to ground flush to prevent intereferance with guards.''<br /> |}<br /> '''''&lt;big&gt;Powered Roller Cutout Photo Eye &amp; Reflector Locations (May 2022 to Present)&lt;/big&gt;'''''<br /> <br /> [[File:BE-TS Powered Roller Cutout Photo Eye &amp; Reflector Locations (May 2022 to Present).png|alt=BE-TS Powered Roller Cutout Photo Eye &amp; Reflector Locations (May 2022 to Present)|frameless|555x555px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1321A<br /> |PHOTO EYE<br /> |<br /> |''† Polarized''<br /> |1<br /> |-<br /> |2<br /> |13537001-2<br /> |MOUNT-PHOTO EYE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E1321-R<br /> |REFLECTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |41217171<br /> |MOUNT-REFLECTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |SS0803<br /> |SCREW-RHMS-#6-32 X 5/8&quot;<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |PL0506<br /> |GROMMET-SEALING-2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''Quantities provided are for Single-Sided (PRC-1) Power Roller Cutout option. For units with Double Sided (PRC-2) option, quantities are double.''<br /> |-<br /> | colspan=&quot;6&quot; |''† Polarized Photo Eye recommended to prevent potential operational issues with very smooth or shiny battery cases.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Reflector mounting screws are trimmed to length.''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Powered Roller Cutout Mounting&lt;/big&gt;''''' ====<br /> [[File:BE-TS Powered Roller Cutout Mounting.png|alt=BE-TS Powered Roller Cutout Mounting|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0281<br /> |SOLENOID VALVE<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |BI0001<br /> |NIPPLE-CLOSE-#8 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |6<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |7<br /> |H1600<br /> |ADAPTER-90 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |H1546<br /> |ADAPTER-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Powered Roller Cutout Override Button&lt;/big&gt;''''' ====<br /> [[File:BE-TS Powered Roller Cutout Override Button.png|alt=BE-TS Powered Roller Cutout Override Button|frameless|568x568px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ACTUATOR-PUSH BUTTON (DISCONTINUED)<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |N/A<br /> |CONTACT BLOCK-N/C (DISCONTINUED)<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |3<br /> |E0384<br /> |ACTUATOR-PUSH BUTTON<br /> |80932002<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0386<br /> |CONTACT BLOCK-N/C<br /> |80932002<br /> |<br /> |1<br /> |-<br /> |5<br /> |E0387<br /> |DUMMY BLOCK<br /> |80932002<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0388<br /> |PUSH BUTTON-GREEN<br /> |80932002<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''Button location on dash may vary from position shown.''<br /> |-<br /> | colspan=&quot;6&quot; |''† Parts no longer available. Must order new Push-Button Switch Kit 80932002''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Powered Roller Cutout Junction Box&lt;/big&gt;''''' ====<br /> [[File:BE-TS Powered Roller Cutout Junction Box.png|alt=BE-TS Powered Roller Cutout Junction Box|frameless|535x535px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |3<br /> |-<br /> |4<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |4<br /> |-<br /> |5<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |7<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |''Mounting bolts (Not shown)''<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Level Assist&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Level Assist.png|alt=BE-TS Level Assist|frameless|568x568px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1321A<br /> |PHOTO EYE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |13537001-2<br /> |MOUNT-PHOTO EYE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |PL0502<br /> |GROMMET<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43837007<br /> |TARGET ANGLE<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |E0376<br /> |INDICATOR LIGHT<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |7<br /> |HW0152<br /> |WASHER-5/8&quot; I.D.<br /> |<br /> |''†† See notes (Not shown)''<br /> |2<br /> |-<br /> |8<br /> |E1321-RT<br /> |REFLECTIVE TAPE<br /> |<br /> |''(Not shown)''<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''Location of Indicator Light on the dash may vary from location shown''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Extractors built prior to October 2021 used Multi-Piece Indicator Lights with Replaceable Bulb and Lens are no longer available. Current Indicator Light is a 1-Piece LED Assembly. Replacement of any Multi-Piece Component requires replacing entire assembly with current, 1-Piece Indicator Light.''<br /> |-<br /> | colspan=&quot;6&quot; |''††† Washers required for units that did not ship with Level Assist option from the factory.''<br /> |}<br /> '''&lt;big&gt;''Level Assist Junction Box''&lt;/big&gt;'''<br /> <br /> [[File:BE-TS Level Assist Junction Box.png|alt=BE-TS Level Assist Junction Box|frameless|524x524px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |4<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |5<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |''Mounting bolts (Not shown)''<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Blue Light&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Blue Light.png|alt=BE-TS Blue Light|frameless|611x611px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |EW2002B<br /> |BLUE PROJECTION SPOTLIGHT<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW0401<br /> |BOLT-HHCS-3/8-16 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0107<br /> |WASHER-LOCK-3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |4<br /> |-<br /> |5<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43835001<br /> |STANCHION-POWER<br /> |<br /> |<br /> |2<br /> |}<br /> [[File:BE-TS Blue Light Enclosure.png|alt=BE-TS Blue Light Enclosure|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-8&quot; X 8&quot; X 4&quot;<br /> |<br /> |''Consult factory''<br /> |1<br /> |-<br /> |2<br /> |E0135<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |''Blank panel without holes''<br /> |1<br /> |-<br /> |3<br /> |PS5R-SC12<br /> |POWER SUPPLY<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0908<br /> |MOUNTING RAIL<br /> |<br /> |''Sold by length''<br /> |A/R<br /> |-<br /> |5<br /> |YE0402<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |YE0405<br /> |END BARRIER<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |YE0406<br /> |END ANCHOR<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |E0341<br /> |GROUND LUG<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |3<br /> |-<br /> |10<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |11<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |''2 per Mounting Rail''<br /> |5<br /> |-<br /> |12<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |''2 per Mounting Rail''<br /> |5<br /> |-<br /> |13<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |''2 per Mounting Rail''<br /> |5<br /> |-<br /> |14<br /> |00196404<br /> |LABEL-DANGER<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Water Cart&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Water Cart.png|alt=BE-TS Water Cart|frameless|549x549px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PB0033<br /> |OVERFILL INDICATOR<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |PB0034<br /> |LOCKNUT-CONDUIT-2&quot;-NYLON<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0308<br /> |FILLER/BREATHER ASSEMBLY<br /> |<br /> |Includes gaskets<br /> |1<br /> |-<br /> |4<br /> |HW0209<br /> |SCREW-RHMS-10-32 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |5<br /> |550-057<br /> |HOSE-FILL-3/4&quot; X 15'<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |550-027<br /> |ON/OFF VALVE<br /> |<br /> |''(Not shown)''<br /> |1<br /> |-<br /> |7<br /> |PB0902<br /> |HOSE-3/4&quot;<br /> |<br /> |<br /> |30&quot;<br /> |-<br /> |8<br /> |HW1018<br /> |HOSE CLAMP-3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |PB0603<br /> |ADAPTER-3/4&quot; NPT X 3/4&quot; BARB<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |PB0456<br /> |ELBOW-STR-90 DEG-3/4&quot; NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |PB0451<br /> |ADAPTER-3/4&quot; NPT X 3/4 GHT<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |PB0302<br /> |PLUG-3/4&quot; NPT<br /> |<br /> |<br /> |<br /> |-<br /> |13<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |14<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |SS0106<br /> |SHCS-#10-24 X 1/2&quot;-SST<br /> |<br /> |<br /> |6<br /> |-<br /> |16<br /> |SS0114<br /> |BHSCS-#10-24 X 1/2&quot; SST<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |SS0301<br /> |WASHER-FLAT-#10-SAE-SST<br /> |<br /> |<br /> |10<br /> |-<br /> |18<br /> |00196701<br /> |DECAL-BHS-12&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |00196404<br /> |LABEL-DANGER-&quot;120 VOLTS&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |20<br /> |00166648<br /> |LABEL, NON-POTABLE<br /> |<br /> |<br /> |1<br /> |-<br /> |21<br /> |HW0418<br /> |BOLT-HHCS-3/8-16 X 2-1/4&quot;<br /> |<br /> | rowspan=&quot;3&quot; |''Mounting bolts'' <br /> <br /> ''(Not shown)''<br /> |2<br /> |-<br /> |22<br /> |HW0031<br /> |NUT-HEX-3/8-16 CENTERLOCK<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |2<br /> |}<br /> [[File:BE-TS Water Cart 2.png|alt=BE-TS Water Cart|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1511<br /> |SWITCH-ROCKER<br /> |<br /> |Submersible rated<br /> |1<br /> |-<br /> |2<br /> |E0378<br /> |INDICATOR LIGHT-120VAC-GREEN<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |3<br /> |E0376<br /> |INDICATOR LIGHT-120VAC-AMBER<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |4<br /> |E0377<br /> |INDICATOR LIGHT-120VAC-RED<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |5<br /> |46917015<br /> |PLACARD-INDICATOR LIGHT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0505<br /> |16-3 SO CORD<br /> |<br /> |<br /> |72&quot;<br /> |-<br /> |7<br /> |E0653<br /> |PLUG-120V/15A<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |9<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |PL0501<br /> |GROMMET-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |E1313<br /> |SOCKET-RELAY-8 PIN<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |E0331<br /> |RELAY-DPDT-110VAC<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |E0440<br /> |TERMINAL BLOCK-8 POLE<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |E1070<br /> |GROUND BAR-4 POSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |HW0139<br /> |SCREW-RHMS-#8-32 X 1 1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |HW0135<br /> |SCREW-RHMS-#8-32 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW1061<br /> |SCREW-RHMS-#8-32 X 1&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |5<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Water carts built prior to October 2021 used Multi-Piece Indicator Lights with Replaceable Bulb and Lens and are no longer available. Current Indicator Lights are a 1-Piece LED Assemblly.'' <br /> <br /> ''Replacement of any Mutli-Piece component requires replacing entire assembly with current 1-Piece Indicator Light.'' <br /> |}<br /> <br /> = &lt;big&gt;Service &amp; Maintenance&lt;/big&gt; =<br /> <br /> == &lt;big&gt;Daily Inspection List&lt;/big&gt; ==<br /> The points listed below should be visually inspected daily prior to initial start up of the Battery Extractor to ensure safe and proper operation of the unit and to help avoid unnecessary down time.<br /> <br /> # Walk around unit and inspect for any physical damage to machine not previously noted.<br /> # Verify all guards are in place.<br /> # Inspect the AC power feed for any damage.<br /> # Vacuum equipped units: Inspect vacuum cups for damage to cup sealing surface, backup casting, and vacuum hoses. Magnet equipped units: Inspect magnets for damage to attachment face, proximity sensor cover, cables and connections.<br /> # Inspect travel path and area around unit for any hydraulic oil that could be a potential repair/maintenance issue and/or safety hazard.<br /> # Check oil level in hydraulic reservoir at fill level gauge.<br /> # Check that operator safety gate and all safety switches are in proper working order.<br /> # Verify extractor path is free of obstructions.<br /> # Check roller beds for any debris and clean as required.<br /> # Board unit, engage system and verify all functions are operating properly and that no abnormal or unusual noises are present.<br /> <br /> ''* Use form IF-5008 when preforming daily inspections''<br /> <br /> == &lt;big&gt;Operator's Daily Checklist&lt;/big&gt; ==<br /> [[File:BE-TS Operator's Daily Checklist.png|alt=BE-TS Operator's Daily Checklist|frameless|1180x1180px]]<br /> <br /> == &lt;big&gt;Recommended Battery Extractor Lubrication Intervals&lt;/big&gt; ==<br /> {| class=&quot;wikitable&quot;<br /> !Lubrication Task<br /> !'''# of Places'''<br /> !Intervals<br /> |-<br /> |'''1. Lubricate grease fittings using #2 lithium based grease'''<br /> |<br /> |<br /> |-<br /> |A. Extractor arm drive nut and carrier bearings<br /> |5 places<br /> |50 hrs / Weekly<br /> |-<br /> |B. Idler casters<br /> |2 places<br /> |200 hrs / Weekly<br /> |-<br /> |'''2. Wipe off and lubricate chains using light machine oil'''<br /> |<br /> |<br /> |-<br /> |A. #80 Lift chains (Not applicable to BE-SL units)<br /> |4 places<br /> |200 hrs / Monthly<br /> |-<br /> |B. #60 Equalization chains<br /> |4 places<br /> |200 hrs / Monthly<br /> |-<br /> |C. #35 Powered roller chains<br /> |8 places<br /> |200 hrs / Monthly<br /> |-<br /> |'''3. Change return line hydraulic fluid filter'''<br /> ''(Oil filtration of at least 20 microns is recommended)''<br /> |1 place<br /> |300 hrs / Twice Quarterly<br /> |-<br /> |'''4. Change hydraulic fluid'''<br /> | -<br /> |600 hrs / Quarterly *<br /> |-<br /> |'''5. Complete preventative maintenance (PM)'''<br /> Use form IF-5029 for Vacuum equipped units.<br /> <br /> Use form IF-5028 for Magnet equipped units.<br /> | -<br /> |600 hrs / Quarterly<br /> |-<br /> ! colspan=&quot;3&quot; |NOTES<br /> |-<br /> | colspan=&quot;3&quot; |''These recommendations are based on average use in a typical warehouse environment and may be adjusted based on specific circumstances. Dusty and/or extreme hot/cold environments may require more frequent lubrication.''<br /> |-<br /> | colspan=&quot;3&quot; |''* BHS recommends implementing an oil sampling and analysis program to monitor hydraulic fluid condition and determine when hydraulic fluid changes are required. The fluid analysis program should be a continuous process and all results should be evaluated. Changes in the condition of the hydraulic system may indicate component wear, fluid deterioration and/or contamination.''<br /> |}<br /> {|<br /> |[[File:NOTICE-warn.png|alt=NOTICE|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:NOTICE-warn.png]]<br /> |<br /> *'''The mounted bearings used on the power rollers, equalization shafts, drive wheels, and drive screw are sealed and shielded bearings. Lubrication may breach the seals of these bearings, therefore these bearings should not be lubricated unless the machine has been cleaned with a high pressure wash on a regular basis (not recommended).'''<br /> *'''Hydraulic fluid should not exceed 140°F (60°C) for extended periods.'''<br /> |}<br /> ===&lt;big&gt;'''&lt;u&gt;Reservoir Capacities ''(APPROX.)''&lt;/u&gt;'''&lt;/big&gt;===<br /> {|<br /> |BE-SL<br /> |18 gal (68 L)<br /> |-<br /> |BE-DS<br /> |18 gal (68 L)<br /> |-<br /> | rowspan=&quot;2&quot; |BE-TS<br /> |30 gal (114 L) ''(Units built Pre-2014)''<br /> |-<br /> |45 gal (170 L) ''(Units built 2014 to Present)''<br /> |-<br /> |BE-QS<br /> |60 gal (227 L)<br /> |}The reservoir should be filled so fluid level is within a half inch (1/2&quot;) of the top of sight glass. Use Chevron AW 68 or equivalent ISO 68 grade hydraulic oil with anti-wear additives and foam suppressant.<br /> <br /> '''''NOTE'':''' Some units shipped from the factory with AW 32 oil for cold environment operation. Units using AW 32 from the factory may experience poor performance if AW 68 is used instead of AW 32 due to the increased viscosity of the oil.<br /> <br /> ==&lt;big&gt;Preventative Maintenance Reports&lt;/big&gt;==<br /> ===&lt;big&gt;&lt;u&gt;Vacuum Extraction&lt;/u&gt;&lt;/big&gt;===<br /> [[File:Battery Extractor Series - Vacuum Extraction Planned Maintenance Inspection Report Page 1.png|alt=Battery Extractor Series - Vacuum Extraction Planned Maintenance Inspection Report Page1|frameless|1238x1238px|link=https://tech.bhs1.com/index.php/File:Battery_Extractor_Series_-_Vacuum_Extraction_Planned_Maintenance_Inspection_Report_Page_1.png]]<br /> <br /> [[File:Battery Extractor Series - Vacuum Extraction Planned Maintenance Inspection Report page2.png|alt=Battery Extractor Series - Vacuum Extraction Planned Maintenance Inspection Report Page 2|frameless|1230x1230px|link=https://tech.bhs1.com/index.php/File:Battery_Extractor_Series_-_Vacuum_Extraction_Planned_Maintenance_Inspection_Report_page2.png]]<br /> ===&lt;big&gt;&lt;u&gt;Magnet Extraction&lt;/u&gt;&lt;/big&gt;===<br /> [[File:Battery Extractor Series - Magnet Extraction Planned Maintenance Inspection Report Page 1.png|alt=Battery Extractor Series - Magnet Extraction Planned Maintenance Inspection Report Page 1|frameless|1224x1224px|link=https://tech.bhs1.com/index.php/File:Battery_Extractor_Series_-_Magnet_Extraction_Planned_Maintenance_Inspection_Report_Page_1.png]]<br /> <br /> [[File:Battery Extractor Series - Magnet Extraction Planned Maintenance Inspection Report Page 2.png|alt=Battery Extractor Series - Magnet Extraction Planned Maintenance Inspection Report Page 2|frameless|1233x1233px|link=https://tech.bhs1.com/index.php/File:Battery_Extractor_Series_-_Magnet_Extraction_Planned_Maintenance_Inspection_Report_Page_2.png]]<br /> <br /> ==&lt;big&gt;80292002-i – Equalization Chain Installation / Resetting Procedure&lt;/big&gt;==<br /> ===&lt;big&gt;&lt;u&gt;Required Tools&lt;/u&gt;&lt;/big&gt;===<br /> *Large standard screwdriver<br /> *1/8&quot;, 5/32&quot;, 3/16&quot; Allen wrench<br /> *(2) 1-1/8&quot; Open-end wrenches<br /> *Needle nose pliers<br /> *6&quot; Steel scale (ruler)<br /> *Brake cleaner (non-chlorinated)<br /> *Loctite #242 (blue)<br /> *80292002 - E.Q. Adjustment stop kit (SL, DS, TS) or 80492001 - BE-QS E.Q. Adjustment stop kit<br /> *Ladder or work platform ''(see notes)''<br /> ===&lt;big&gt;&lt;u&gt;''Optional Tools''&lt;/u&gt;&lt;/big&gt;===<br /> *Wire brush for removing Loctite from components prior to reassembly<br /> ===&lt;big&gt;&lt;u&gt;Notes&lt;/u&gt;&lt;/big&gt;===<br /> *''A ladder, man lift or other device is required to access the upper E.Q. studs on BE-TS and BE-QS units.''<br /> *''The following procedures must be performed with the extractor unloaded and in a level area of the travel path.''<br /> *''Installation of the E.Q. stop kit requires (4) persons plus a trained battery extractor operator to raise and lower the inner carriage.''<br /> *''It is recommended to have new E.Q. chain connecting links on hand prior to performing the following procedures.''<br /> *''The upper E.Q. stud lock washers cannot be reused and must be replaced prior to reassembly.''<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Page 369 Image 0001.png|alt=BE-TS with EQ Adjustment Stops Installed|none|thumb|300x300px|BE-TS with EQ Adjustment Stops Installed|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Page_369_Image_0001.png]]<br /> ===&lt;big&gt;&lt;u&gt;IMPORTANT&lt;/u&gt;&lt;/big&gt;===<br /> *'''Read and understand the Safety and De-energization Procedure TP-606 before starting this procedure.'''<br /> *'''Read and understand these instructions completely before starting this procedure.'''<br /> ===&lt;big&gt;&lt;u&gt;Procedure&lt;/u&gt;&lt;/big&gt;===<br /> 1. Remove the inner and outer frame guards to access the lower equalization studs.<br /> <br /> 2. Raise the inner frame approximately 30&quot; (762 mm) for SL, DS and TS units or 50&quot; (1270 mm) for QS units from the fully lowered position. Install (1) adjustment stop at each corner of the roller bed. See Figure 1.[[File:IOP-400 BE-SL&amp;DS (10-23) EQ Chain Instructions-Figure1.png|alt=|none|thumb|375x375px|FIGURE 1|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_EQ_Chain_Instructions-Figure1.png]]3. Slowly lower the inner carriage until the roller bed is firmly and securely seated against all four stops. See Figure 2.[[File:IOP-400 BE-SL&amp;DS (10-23) Page 370 Image 0002.png|alt=Roller bed firmly seated against all four stops|none|thumb|398x398px|FIGURE 2|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Page_370_Image_0002.png]]4. Lockout/tagout the B.E. per your corporate policy.<br /> <br /> 5. De-energize the B.E. per BHS Safety and De-energization procedure TP-606.<br /> <br /> 6. Loosen and remove the upper hex nuts and remove the upper chain studs. Remove the lock washers from the upper chain studs. Save the hex nuts for reassembly later. Discard the lock washers and obtain new, 3/4&quot; split-ring lock washers for reassembly.<br /> <br /> 7. If replacing the chain, remove the upper stud and remove the chain from the lower stud. Discard the connecting links.<br /> *''If the E.Q. chains are being reset due to a connecting link failure, it is recommended to also replace the stud where the connecting link failed.''<br /> *''It is recommended to replace the connecting links when replacing or resetting the E.Q. chains.''<br /> 8. If replacing a lower stud, remove the connecting link and disconnect the chain. Loosen the hex nut and remove the stud. Remove the hex nut from the old stud and reinstall it on the new stud. Reinstall the new stud so that it is flush with the bottom of the frame and the hole is aligned front-to-back with the extractor.<br /> <br /> 9. Attach the chains to the lower studs using the connecting links. Attach the upper studs to the chains using the connecting links, making sure the nut is threaded down near the connecting link and lay the chains in the frame. See Figure 3.<br /> *''Do not fully assemble the lower connecting links by bending the cotter pins as the connecting link may need to be removed later for stud adjustment.''[[File:IOP-400 BE-SL&amp;DS (10-23) EQ Chain Attached to Upper Stud.png|alt=BE-TS Chain Attached to Upper Stud|none|thumb|300x300px|FIGURE 3|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_EQ_Chain_Attached_to_Upper_Stud.png]]<br /> 10. If new E.Q. sprockets are to be installed, remove the clamp collars and old sprockets. Install the new sprockets and reinstall the clamp collars. DO NOT tighten the set screws at this point as adjustment/alignment may be required.<br /> *''Sprockets MUST be keyed in-line.''<br /> 11. Align the E.Q. shafts so that the keyways are in the 2 o'clock position (approximately 60 degrees from vertical). This will bring the sprocket set screws to the top of the sprocket when the inner carriage is lowered. See Figure 4.[[File:IOP-400 BE-SL&amp;DS (10-23) EQ Shafts aligned 60 Degrees from Vertical.png|alt=BE-TS EQ Shafts aligned 60 Degrees from Vertical|none|thumb|300x300px|FIGURE 4|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_EQ_Shafts_aligned_60_Degrees_from_Vertical.png]]12. Starting with the inside chain, route the chain over the sprocket directly above the lower stud and under the inside sprocket on the opposite shaft. Attach the upper stud to the top cross bar, making sure a new 3/4&quot; split -ring lock washer is installed between the cross bar and lower hex nut. Hand tighten the upper stud adjusting nut to remove slack from the chain. See Figure 5.<br /> <br /> 13. Route the outer chain over the sprocket, above the stud and under the sprocket on the opposite shaft. Attach the upper stud to the top cross bar, making sure a new, 3/4&quot; split-ring lock washer is installed between the cross bar and lower hex nut. Hand tighten the upper stud adjusting nut to remove slack from the chain. See Figure 5.<br /> *''It is recommended to begin at the operator end where room is limited allowing easier access at the opposite end to route the chain under the final sprocket.''<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Inside and Outside EQ Chains.png|alt=BE-TS Inside and Outside EQ Chains|none|thumb|499x499px|FIGURE 5|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Inside_and_Outside_EQ_Chains.png]]14. Repeat steps 11 through 13 for the opposite side of the extractor. It is likely that a large, standard screwdriver will be necessary to position the final chain over the sprocket. See Figure 6.[[File:IOP-400 BE-SL&amp;DS (10-23) Page 371 Image 0002.png|alt=It is likely that a large, standard screwdriver will be necessary to position the final chain over the sprocket.|none|thumb|300x300px|FIGURE 6|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Page_371_Image_0002.png]]15. Adjust the lower studs up or down as necessary to take the slack out of the chain between the lower studs and the sprockets by removing the connecting link from the stud and turning the stud. Tighten the hex nuts against the frame once the studs have been adjusted. Reattach the chain.<br /> *DO NOT allow the stud to twist when tightening the hex nuts.<br /> 16. Tighten the upper hex nut on the upper studs until there is approximately 1/4&quot; (7 mm) of total deflection in the middle of the upper, vertical chain sections. Tighten the lower hex nuts on the upper studs to lock the studs in place.<br /> *''Each section of chain between the sprockets should have approximately the same tension as the other on the same side. See Figure 5.''<br /> 17. Raise the inner frame and remove the adjustment stops from the four corners and lower the inside frame.<br /> <br /> 18. Verify equalization sprocket and stud alignment by using a 6&quot; scale. Measure the distance from the inside roller bed frame to the center of the equalization stud. Compare this distance with the measurements from the inside roller bed frame to the center-lines of the sprockets. Adjust the position of the sprocket as necessary to make the distances equal. This will ensure the chain and sprockets are in line with the stud. Repeat this process for the three remaining chains. See Figures 7 &amp; 8.<br /> <br /> 19. Raise and lower the inner frame several times and listen for any chain popping noises to confirm the sprockets are in line with the lower studs. If there is no popping noise, lower the inner frame all the way down.[[File:IOP-400 BE-SL&amp;DS (10-23) EQ Chain Verify equalization sprocket and stud alignment by using a 6in scale-Fig7.png|alt=BE-TS EQ Chain Procedure Figure 7 - Verify equalization sprocket and stud alignment by using a 6&quot; scale|none|thumb|300x300px|FIGURE 7|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_EQ_Chain_Verify_equalization_sprocket_and_stud_alignment_by_using_a_6in_scale-Fig7.png]][[File:IOP-400 BE-SL&amp;DS (10-23) EQ Chain Verify equalization sprocket and stud alignment by using a 6in scale-Fig8.png|alt=BE-TS EQ Chain Verify equalization sprocket and stud alignment by using a 6in scale - Fig 8|none|thumb|300x300px|FIGURE 8|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_EQ_Chain_Verify_equalization_sprocket_and_stud_alignment_by_using_a_6in_scale-Fig8.png]]20. Clean any existing, hardened Loctite from the sprockets, sprocket sets screws, clamp collars and clamp collar bolts.<br /> <br /> 21. Apply Loctite to and tighten the set screws on the sprockets. Slide the clamp collars against the outside sprocket, loctite and tighten the clamp collars.<br /> ==&lt;big&gt;80292001-i – Battery Extractor Service Stand Installation Instructions&lt;/big&gt;==<br /> ===&lt;big&gt;&lt;u&gt;Required Tools&lt;/u&gt;&lt;/big&gt;===<br /> None<br /> ===&lt;big&gt;&lt;u&gt;Notes&lt;/u&gt;&lt;/big&gt;===<br /> *''Refer to kit part # 80292001 or 80392001 for the complete bill of materials supplied.''<br /> *''Remove ALL batteries from extractor prior to installation / service.''<br /> *''Installation of service stands requires (2) persons plus a trained battery extractor operator to raise and lower the inner carriage. DO NOT attempt installation with less than (3) persons.''<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Single Level Service Stand Properly Installed.png|alt=Single Level Service Stand Properly Installed|none|thumb|368x368px|Single Level Service Stand Properly Installed|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Single_Level_Service_Stand_Properly_Installed.png]]<br /> ===&lt;big&gt;&lt;u&gt;IMPORTANT&lt;/u&gt;&lt;/big&gt;===<br /> *'''Read and understand the Safety and De-energization Procedure TP-606 before starting this procedure.'''<br /> *'''Read and understand these instructions completely before starting this procedure.'''<br /> ===&lt;big&gt;&lt;u&gt;Procedure&lt;/u&gt;&lt;/big&gt;===<br /> 1. Have a qualified operator raise the inner carriage of the extractor to the required height for installation. For single level applications, the required height will be approximately 25&quot; (64 cm) from the fully lowered position. For double, triple, and quad stack machines, the required height will be approximately 55&quot; (140 cm) from the fully lowered position.<br /> *On double, triple, and quad stack battery extractors, the operator either must remain on the operator platform during service or be provided an OSHA approved method of egress. This is not applicable to single level battery extractors as the operator platform height is fixed.<br /> 2. Install the stands by engaging the top of the stand into the inner carriage cutouts. Place the bottom channel of the stand over the tube of the outer frame. The top flanges of each stand are tapered to aid in proper alignment of the stand with the inner frame.<br /> <br /> See Figures 1 &amp; 2.[[File:IOP-400 BE-SL&amp;DS (10-23) engaging the top of the stand into the inner carriage cutout.png|alt=Properly seated in cutout|none|thumb|300x300px|FIGURE 1|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_engaging_the_top_of_the_stand_into_the_inner_carriage_cutout.png]][[File:IOP-400 BE-SL&amp;DS (10-23) Page 374 Image 0005.png|none|thumb|300x300px|FIGURE 2|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Page_374_Image_0005.png]]3. Once BOTH stands have been properly placed, SLOWLY lower the inner carriage while the stands are held in place.<br /> <br /> 4. Once the inner carriage is firmly seated on the service stands, verify the stands are securely installed. See Figure 3.[[File:IOP-400 BE-SL&amp;DS (10-23) Page 374 Image 0006.png|none|thumb|450x450px|FIGURE 3|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Page_374_Image_0006.png]]<br /> ==&lt;big&gt;Trouble Shooting Guide&lt;/big&gt;==<br /> {| class=&quot;wikitable&quot;<br /> !Problem Symptom<br /> !Probable Cause<br /> !Solution<br /> |-<br /> |Hydraulic power Unit does not operate.<br /> No electric to power unit motor.<br /> |1. No AC power to Unit.<br /> 2. Reset on magnetic motor starter tripped.<br /> <br /> 3. Gate switch not actuated.<br /> <br /> 4. Foot Pedal switch not engaged.<br /> <br /> 5. Emergency Stop switch is depressed.<br /> |1. Check fuses or breaker.<br /> 2. Check reset button.<br /> <br /> 3. Make sure safety gate is engaging switch.<br /> <br /> 4. Check foot pedal for obstruction.<br /> <br /> 5. Reset button using machine key.<br /> |-<br /> |Power unit runs but no pressure reading at gauge,<br /> also no functions move.<br /> |1. AC input is in reverse phase. Motor is running backwards.<br /> 2. Main system relief valve stuck open or defective.<br /> <br /> 3. Coupling between motor and pump loose.<br /> |1. Reverse any two of the three hot lines to unit.<br /> 2. Check relief valve cartridge for trash or debris.<br /> <br /> Replace as required.<br /> <br /> 3. Inspect coupling assy.<br /> |-<br /> |Magnetic starter contact chatters-at startup.<br /> Contact chatters while traveling.<br /> |1. 1 leg of 3 phase input power out.<br /> 2. Safety gate and/or gate switch out of adjustment.<br /> |1. Check fuse or circuit breaker at service panel.<br /> 2. Check and adjust gate or switch as required to<br /> <br /> ensure full engagement of plunger on gate<br /> <br /> switch and that the safety gate is not bouncing<br /> <br /> due to vibration.<br /> |-<br /> |No floor travel empty or loaded-all other functions work properly.<br /> |1. Extractor arm off center-left to right.<br /> 2. Proximity switch or sensing bracket out of target range.<br /> <br /> 3. Proximity switch defective or broken.<br /> <br /> 4. Bad solenoid coil on floor cutout valve.<br /> <br /> 5. Spool on floor cutout valve stuck open.<br /> |1. Center arm.<br /> 2. Adjust as needed to achieve 1/4” clearance.<br /> <br /> 3. Check switch and replace.<br /> <br /> 4. Check solenoid and replace if needed.<br /> <br /> 5. Remove and clean spool cartridge or replace.<br /> |-<br /> |Floor travel moves but is sluggish<br /> and stalls with a load at certain points.<br /> |1. Uneven floor conditions. High/low spots.<br /> 2. Excessive tire wear.<br /> <br /> 3. Wheel shaft-to-motor shaft coupling on drive wheel assembly loose or broken.<br /> <br /> 4. Debris lodged under battery extractor.<br /> |1. Check flatness of floor. Check guidance track for scraping of guide arm on top of angle.<br /> 2. Measure under clearance of battery extractor. Should be no less than 5/8” replace poly wheels as needed.<br /> <br /> 3. Inspect drive assembly while under load to see if shafts and couplings are moving in unison. Repair as needed.<br /> <br /> 4. Inspect under unit and remove debris.<br /> |-<br /> |Inner carriage bounces while lifting under load,<br /> but not when empty.<br /> |1. Down speed adjustment valve open too far.<br /> |1. Adjust as needed to eliminate carriage bounce.<br /> |-<br /> |Inner carriage does not lift evenly.<br /> Four corners do not land evenly against outer frame tube.<br /> |1. Equalization chains are out of adjustment.<br /> 2. Excessive chain or sprocket wear.<br /> <br /> 3. Equalization chains are out of synchronization. Possibly may have jumped a sprocket tooth.<br /> <br /> 4. Broken bearing housing on mounted shaft.<br /> <br /> 5. Lift cylinder roping chains out of adjustment.<br /> |1. Readjust with the top stud until equal tension is achieved.<br /> 2. Replace as needed.<br /> <br /> 3. Evaluate and resynchronize as required.<br /> <br /> 4. Inspect and replace.<br /> <br /> 5. Readjust as needed to equal tension on all four cylinders in full down position.<br /> |}<br /> =&lt;big&gt;Aftermarket Support&lt;/big&gt;=<br /> [https://na.bhs1.com/blog/post/tt-922-technical-support Click here] for details on BHS' Aftermarket Support.<br /> =&lt;big&gt;Statement of Warranty&lt;/big&gt;=<br /> [https://store.bhs1.com/warranty Click here] for details on BHS' Statement of Warranty.</div>

Kperrier https://tech.bhs1.com/index.php?title=(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)&diff=7662 2024-04-02T16:45:33Z

<p>Kperrier: /* [Current] Drive Screw Assembly (Frame #'s 374 to Present) */</p> <hr /> <div>'''Looking for a specific replacement part?''' Ctrl-F (or Command-F for Mac users) brings up your browsers search panel and can search any text on the entire web page. Find parts by searching a part # or part description.<br /> <br /> '''Register your equipment with [https://na.bhs1.com/media-library/bhs-optima/ BHS Optima], BHS's free app.'''<br /> <br /> '''California Residents''': WARNING: This product contains chemicals known to the State of California to cause cancer and/or reproductive harm, and birth defects or other reproductive harm. [https://na.bhs1.com/about-bhs/compliance-statement-for-california-proposition-65/ Learn more here.]<br /> =&lt;big&gt;Preface&lt;/big&gt;=<br /> =&lt;big&gt;TP-606 – Safety &amp; De-Energization Procedures&lt;/big&gt;=<br /> ==&lt;big&gt;General Safety&lt;/big&gt;==<br /> {|<br /> |[[File:Read Before Operating Notice.png|alt=Read Before Operating|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:Read_Before_Operating_Notice.png]]<br /> |<br /> *Read and understand all instructions and warnings before using or servicing this equipment.<br /> *Keep these instructions for future reference.<br /> |}<br /> *Battery Extractor (BE) units shall only be operated by suitable persons of at least 18 years of age, who have been trained in the proper and safe operation of the BE and expressly certified/charged, in writing, by the user or their representative.<br /> *Only one person is permitted to travel on the BE at any time.<br /> *BE units shall only be used indoors in an industrial setting on a hard, nonslip, and level floor without defects including but not limited to holes, gouges, cracks, drains or obstacles comprised of concrete or other suitable industrial material meeting the minimum requirements specified by BHS as well as any local requirements.<br /> *A licensed structural engineer should be consulted prior to installing a BE on any building level other than the ground floor.<br /> *BE units are not designed to be shipped or transported after initial delivery.<br /> *Failure to follow these instructions and warnings may result in property damage, personal injury or death.<br /> ===&lt;big&gt;&lt;u&gt;Work Area&lt;/u&gt;&lt;/big&gt;===<br /> *Keep work area clean and well lit. Cluttered work areas and poor lighting can lead to accidents.<br /> *Clean up/contain any fluid spills immediately to prevent slips or falls.<br /> *Be aware of potential hazards when performing any service or maintenance to the unit.<br /> ===&lt;big&gt;&lt;u&gt;Service &amp; Maintenance&lt;/u&gt;&lt;/big&gt;===<br /> Service personnel shall wear Personal Protective Equipment (PPE) appropriate for the task being performed.<br /> {|<br /> |[[File:Electrical Hazard Warning.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Electrical_Hazard_Warning.png]]<br /> [[File:Danger Warning.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Danger_Warning.png|alt=DANGER]]<br /> |<br /> ===&lt;big&gt;&lt;u&gt;Lockout/Tagout&lt;/u&gt;&lt;/big&gt;===<br /> '''Lockout/tagout the BE per your corporate policy, if damaged or not functioning properly. Lockout/tagout and de-energize all systems prior to performing any maintenance or service to unit.'''<br /> |}<br /> {|<br /> |[[File:Warning-Battery-Explosion.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Warning-Battery-Explosion.png]]<br /> [[File:Danger Warning.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Danger_Warning.png|alt=DANGER]]<br /> |<br /> ===&lt;big&gt;&lt;u&gt;Lead-Acid Battery Explosion Hazard&lt;/u&gt;&lt;/big&gt;===<br /> '''DO NOT allow open flames or sparks of any kind near a battery. Highly explosive gas is generated when charging a battery that can remain in battery cells for extended periods of time after charging is complete.'''<br /> *Always wear appropriate PPE including rubber apron, gloves, boots and full face shield when performing service or maintenance to any lead-acid batteries.<br /> *DO NOT place metal or other conductive objects on top of battery. Arcing may occur causing damage to the battery and/or serious personal injury or death.<br /> *Use only chargers matching the voltage and amperage of the battery being charged. Overcharging a battery can cause damage to the battery, charger and/or serious personal injury or death.<br /> *Turn off charger before disconnecting battery from charger. Arcing between battery and charger connectors can cause damage to the connectors and/or serious personal injury or death.<br /> |}<br /> {|<br /> |[[File:Warning-Hydrualic-Hazard.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Warning-Hydrualic-Hazard.png]]<br /> [[File:Warning.png|alt=WARNING|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Warning.png]]<br /> |<br /> ===&lt;big&gt;&lt;u&gt;Hydraulic Hazards&lt;/u&gt;&lt;/big&gt;===<br /> '''AVOID HIGH PRESSURE FLUIDS-Escaping fluid under pressure can penetrate the skin causing serious injury. Relieve pressure before disconnecting hydraulic lines. Tighten all connections before applying pressure. Keep hands and body away from pin holes which eject fluids under high pressure. Use a piece of cardboard or paper to search for leaks. DO NOT use your hand.'''<br /> <br /> '''Any fluid injected into the skin under high pressure should be considered a serious medical emergency despite an initial normal appearance of the skin. There will be a delayed onset of pain, and serious tissue damage may occur. Medical attention should be sought immediately.'''<br /> |}<br /> {|<br /> ![[File:No Pacemakers Notice.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:No_Pacemakers_Notice.png]][[File:Strong Magnet Field Hazard Warning.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Strong_Magnet_Field_Hazard_Warning.png]]<br /> [[File:Warning.png|alt=WARNING|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Warning.png]]<br /> |<br /> ===&lt;big&gt;&lt;u&gt;Electromagnet Hazard&lt;/u&gt;&lt;/big&gt;===<br /> '''Units equipped with magnetic extraction generate strong magnetic fields. Persons with pacemakers &lt;u&gt;SHOULD&lt;/u&gt;''' &lt;u&gt;'''NOT'''&lt;/u&gt; '''operate or be in close proximity to equipment during operation.'''<br /> <br /> '''Failure to comply with this direction''' '''could result in serious personal injury or death.'''<br /> |}<br /> ===&lt;big&gt;&lt;u&gt;Operational Safety&lt;/u&gt;&lt;/big&gt;===<br /> *Only personnel trained in the proper and safe operation of BE units may operate or service the BE.<br /> *Operators shall wear appropriate PPE suitable for working with industrial lead-acid batteries while operating the BE ''(See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Lead-Acid_Battery_Explosion_Hazard Lead-Acid Battery Explosion Hazard] section).''<br /> *All data plates, warning labels, placards, etc. shall be in place and legible at all times. Contact BHS for re-placement data plates, warning labels, placards or instructions.<br /> *All users and service personnel shall be familiar with the meaning and risks associated with all data plates, warning labels, etc.<br /> *All operators and service personnel shall be aware of potential crush and shear points while operating or servicing the BE.<br /> *Keep hands and arms inside the operator compartment while operating the BE.<br /> *Remove BE from service if damaged, defective, or operating improperly (or becomes such while operating) until repairs can be made to correct any problem(s).<br /> *All operators shall be aware of the location of the end stops in the travel path to prevent driving the BE into the end stops.<br /> ===&lt;u&gt;&lt;big&gt;Do's and Don'ts&lt;/big&gt;&lt;/u&gt;===<br /> *'''DO NOT''' exceed the maximum capacity of the BE.<br /> *'''DO NOT''' modify or fit the BE with attachments without prior, written approval from BHS.<br /> *'''DO NOT''' perform any maintenance or service to the BE with a battery loaded on the BE.<br /> *'''DO NOT''' allow anyone to ride in or on the BE.<br /> *'''DO NOT''' operate the BE with any guard or cover removed unless required for maintenance or repair.<br /> *Disconnect the BE from all power sources before attempting to perform service or maintenance to the unit.<br /> *'''DO NOT''' drive the BE into the end stops.<br /> *'''DO NOT''' operate the BE if disengaged from the guidance track.<br /> *'''DO NOT''' allow a battery to exit the BE when a lift truck or battery stand is not present to accept the battery.<br /> *'''DO NOT''' rotate the arm onto a battery such that any part of the extractor arm, vacuum cup or magnet contacts the top of the battery.<br /> *'''DO NOT''' allow anyone to enter the area under the carriage without the service stands properly installed.<br /> *'''DO NOT''' use the BE in a manner for which it is not intended. Some examples of prohibited use are but not limited to:<br /> **To transport people<br /> **As a vehicle jack<br /> **To lift loads greater than its rated load capacity<br /> **Where unintentional movement may exist<br /> **Having direct contact with foodstuffs<br /> **In a potentially explosive atmosphere<br /> ==&lt;big&gt;De-Energization&lt;/big&gt;==<br /> 1. Fully lower the BE roller bed or position the roller bed on service stands if service requires the bed be raised. See Figures 1 &amp; 2.<br /> {|<br /> |[[File:WARNING-warn.png|alt=WARNING|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:WARNING-warn.png]]<br /> !Failure to properly support the roller bed when performing service under the BE could result in injury from the roller bed lowering unexpectedly.<br /> |}[[File:IOP-400 BE-SL&amp;DS (10-23) Fully Lower BE Roller Bed.png|alt=Fully lowered BE roller bed|none|thumb|FIGURE 1|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Fully_Lower_BE_Roller_Bed.png]][[File:IOP-400 BE-SL&amp;DS (10-23) BE Roller Bed on Service Stands .png|alt=Raised BE roller bed positioned on service stands|none|thumb|FIGURE 2|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_BE_Roller_Bed_on_Service_Stands_.png]]2. Turn key on dashboard to the “OFF” position. See Figure 3.[[File:IOP-400 BE-SL&amp;DS (10-23) De-Energization Figure 3.png|alt=Key on BE dashboard turned to the “OFF” position.|none|thumb|FIGURE 3|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_De-Energization_Figure_3.png]]3. Disconnect power to the extractor or shut off the electrical branch circuit breaker.<br /> {|<br /> |[[File:Danger Warning.png|alt=DANGER|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Danger_Warning.png]]<br /> |'''Failure to disconnect electrical power to the BE could result in electrical shock. Serious personal injury or death will occur.'''<br /> |}4. Actuate all hydraulic levers in both directions to re-lease any stored hydraulic pressure. See Figure 4.<br /> {|<br /> |[[File:WARNING-warn.png|alt=WARNING|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:WARNING-warn.png]]<br /> |'''Failure to release any stored hydraulic pres-sure could result in injury from:'''<br /> *'''Escaping hydraulic fluid under high pressure (see ''[https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Hydraulic_Hazards HYDRAULIC HAZARDS]'' in the ''[https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#General_Safety GENERAL SAFETY]'' section).'''<br /> *'''Unexpected movement of hydraulic components.'''<br /> |}[[File:IOP-400 BE-SL&amp;DS (10-23) Actuate all Hydraulic Levers in Both Directions.png|alt=Actuate all hydraulic levers in both directions to release any stored hydraulic pressure.|none|thumb|FIGURE 4|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Actuate_all_Hydraulic_Levers_in_Both_Directions.png]]<br /> ==&lt;big&gt;Labels &amp; Placards&lt;/big&gt;==<br /> '''Operators should be familiar with the meaning of the following labels and placards found on the BE to ensure proper and safe operation.'''<br /> {| class=&quot;wikitable&quot;<br /> |-<br /> ![[File:Read Before Operating Notice.png|alt=Read Before Operating|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Read_Before_Operating_Notice.png]]<br /> |'''Read and understand instruction manual prior to use.'''<br /> |-<br /> ![[File:Lockout-Before-Servicing-Notice.png|alt=Lockout Before Servicing Unit|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Lockout-Before-Servicing-Notice.png]]<br /> |'''Lockout before servicing.'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Extractor Arm Positioning Arrows.png|alt=BE-SL &amp; BE-DS Extractor Arm Positioning Arrows|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Extractor_Arm_Positioning_Arrows.png]]<br /> |'''Extractor arm positioning arrows'''<br /> |-<br /> ![[File:Do Not Operate Without Guards or Covers Notice.png|alt=DO NOT Operate Without Guards or Covers Notice|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Do_Not_Operate_Without_Guards_or_Covers_Notice.png]]<br /> |'''DO NOT operate with guards or covers removed'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) No Riders Allowed.png|alt=No riders allowed|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_No_Riders_Allowed.png]]<br /> |'''NO riders allowed.'''<br /> |-<br /> ![[File:No Pacemakers Notice.png|alt=DO NOT operate by or in close proximity to people with pacemakers.|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:No_Pacemakers_Notice.png]]<br /> |'''DO NOT operate by or in close proximity to people with pacemakers.'''<br /> |-<br /> ![[File:Strong Magnet Field Hazard Warning.png|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Strong_Magnet_Field_Hazard_Warning.png]]<br /> [[File:Warning.png|alt=WARNING|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Warning.png]]<br /> |'''Strong Magnet Field Hazard'''<br /> *Attraction between magnet and metallic objects can crush.<br /> *Keep unsecured metallic objects away from magnet.<br /> *De-energize and lockout/tagout before servicing.<br /> |-<br /> ![[File:Chain Entanglement Hazard Warning.png|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Chain_Entanglement_Hazard_Warning.png]]<br /> [[File:Warning.png|alt=WARNING|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Warning.png]]<br /> |'''Chain Entanglement Hazard'''<br /> *Moving chains and sprockets can crush and cut.<br /> *Keep hands and fingers clear. Do not operate with guards removed.<br /> *De-energize and lockout/tagout before servicing.<br /> |-<br /> ![[File:Electrical Hazard Warning.png|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Electrical_Hazard_Warning.png]]<br /> [[File:Danger Warning.png|alt=DANGER|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Danger_Warning.png]]<br /> |'''Electrical Hazard'''<br /> *Energized components can cause electrical shock.<br /> *De-energize and lockout/tagout before servicing.<br /> |-<br /> ![[File:BE-SL and BE-DS Power Off-On.png|alt=BE-SL and BE-DS Power Off-On|frameless|180x180px|link=https://tech.bhs1.com/index.php/File:BE-SL_and_BE-DS_Power_Off-On.png]]<br /> |'''Power Off/On'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Horn Control.png|alt=BE-SL and BE-DS Horn Control |frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Horn_Control.png]]<br /> |'''Horn (If equipped)'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Vacuum Control.png|alt=BE-SL and BE-DS Vacuum Control |frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Vacuum_Control.png]]<br /> |'''Vacuum Off/On (If equipped)'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Magnet Extraction.png|alt=BE-SL and BE-DS Magnet Off/On|frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Magnet_Extraction.png]]<br /> |'''Magnet Off/On (If equipped)'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Powered Roller Cut Off Override.png|alt=BE-SL and BE-DS Powered Roller Cut Off Override|frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Powered_Roller_Cut_Off_Override.png]]<br /> |'''Powered Roller Cutout Override (If equipped)'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Rack-Level-Assist.png|alt=BE-SL and BE-DS Rack Level Assist |frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Rack-Level-Assist.png]]<br /> |'''Rack Level Assist Indicator (If equipped)'''<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> ! rowspan=&quot;3&quot; |[[File:IOP-400_BE-SL&amp;DS_(10-23)_Power_Rollers_and_Arm_Travel.png.png|alt=BE-SL &amp; DS Powered Roller and Arm Travel Controls|frameless|504x504px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Power_Rollers_and_Arm_Travel.png.png]]<br /> |'''Far Power Rollers'''<br /> |-<br /> |'''Arm Travel'''<br /> |-<br /> |'''Near Power Rollers'''<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> |+''BE-SL &amp; DS UNITS ONLY''<br /> ! colspan=&quot;3&quot; |[[File:IOP-400 BE-SL&amp;DS (10-23) BE-SL&amp;DS Units Platform Controls.png|alt=BE-SL &amp; DS Specific Controls|frameless|460x460px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_BE-SL&amp;DS_Units_Platform_Controls.png]]<br /> |-<br /> |Drive Forward/Reverse<br /> |Platform Raise/Lower<br /> |Arm Rotation Near/Far<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> |+''BE-TS &amp; QS UNITS ONLY''<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) BE-TS &amp; BE-QS Platform Raise and Lower Controls.png|alt=BE-TS &amp; BE-QS Platform Raise and Lower Controls|frameless|240x240px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_BE-TS_&amp;_BE-QS_Platform_Raise_and_Lower_Controls.png]]<br /> ! colspan=&quot;2&quot; |[[File:IOP-400 BE-SL&amp;DS (10-23)BE-TS &amp; BE-QS Specific Controls.png|alt=BE-TS &amp; BE-QS Specific-Controls|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)BE-TS_&amp;_BE-QS_Specific_Controls.png]]<br /> |-<br /> |Platform Raise/Lower<br /> |Drive Foward/Reverse<br /> |Arm Rotation Near/Far<br /> |}<br /> =&lt;big&gt;General Information&lt;/big&gt;=<br /> ==&lt;big&gt;Specification Data&lt;/big&gt;==<br /> [[File:BE-TS Specification Data.png|alt=IOP-401 BE-TS (10-23) Specification Data|frameless|600x600px]]<br /> {| class=&quot;wikitable&quot;<br /> | colspan=&quot;2&quot; |<br /> !BE-24-2-TS<br /> !BE-36-2-TS<br /> !BE-42-2-TS<br /> |-<br /> !A<br /> |Overall Length<br /> |156.5&quot;<br /> |180.5&quot;<br /> |192.5&quot;<br /> |-<br /> !B<br /> |Overall Width<br /> |72&quot;<br /> |72&quot;<br /> |72&quot;<br /> |-<br /> !C<br /> |Overall Height (Lowered)<br /> |158.188&quot;<br /> |158.188&quot;<br /> |160.688&quot;<br /> |-<br /> !<br /> |Overall Height (Raised w/ Overhead Guard)<br /> |182.375&quot;<br /> |182.375&quot;<br /> |182.375&quot;<br /> |-<br /> !<br /> |Overall Height (Raised w/ Strobe &amp; Alarm)<br /> |191.75&quot;<br /> |191.75&quot;<br /> |191.75&quot;<br /> |-<br /> !D<br /> |Wheel Base<br /> |98&quot;<br /> |122&quot;<br /> |134&quot;<br /> |-<br /> !E<br /> |Drive Wheel Center line<br /> |51&quot;<br /> |51&quot;<br /> |51&quot;<br /> |-<br /> !F<br /> |Battery Compartment Width<br /> |24&quot;<br /> |36&quot;<br /> |42&quot;<br /> |-<br /> !G<br /> |Ground Clearance<br /> |.625&quot;<br /> |.625&quot;<br /> |.625&quot;<br /> |-<br /> !H<br /> |Minimum Roller Height<br /> |6.5&quot;<br /> |6.5&quot;<br /> |6.5&quot;<br /> |-<br /> !I<br /> |Maximum Roller Height<br /> |96&quot;<br /> |96&quot;<br /> |96&quot;<br /> |-<br /> !J<br /> |Operator Platform Height (Lowered/Raised)<br /> |11&quot; / 103&quot;<br /> |11&quot; / 103&quot;<br /> |11&quot; / 103&quot;<br /> |}<br /> <br /> === UNITS WITH 10 HP POWER UNIT USED PRIOR TO DECEMBER, 2014 ===<br /> {| class=&quot;wikitable&quot;<br /> !<br /> !BE-24-2-TS<br /> !BE-36-2-TS<br /> !BE-42-2-TS<br /> |-<br /> |Travel Speed<br /> |0 to 190 ft/min / 0 to 0.97 m/s<br /> |0 to 190 ft/min / 0 to 0.97 m/s<br /> |0 to 190 ft/min / 0 to 0.97 m/s<br /> |-<br /> |Raise - Lower Speed<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |-<br /> |Powered Roller Speed<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |-<br /> |Arm Traverse Speed<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |-<br /> |Arm Rotation Time<br /> |6 s to 8 s<br /> |6 s to 8 s<br /> |6 s to 8 s<br /> |-<br /> |Draw Bar Pull / Vacuum<br /> <br /> (12&quot; / 305 mm Round Cup)<br /> |1,000 lb / 454 kg<br /> |1,000 lb / 454 kg<br /> |1,000 lb / 454 kg<br /> |-<br /> |Draw Bar Pull Magnet*<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |-<br /> |Vacuum Attach Time<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |-<br /> |Vacuum Release Time<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |-<br /> |Input Voltage<br /> |480 V / 3 ph / 60Hz<br /> |480 V / 3 ph / 60Hz<br /> |480 V / 3 ph / 60Hz<br /> |-<br /> |AC Current Draw<br /> |16.5 A<br /> |16.5 A<br /> |16.5 A<br /> |-<br /> |Control Circuit Voltage<br /> |120 V ac<br /> |120 V ac<br /> |120 V ac<br /> |-<br /> |Hydraulic Power Unit<br /> |10 hp / 7.46 kW<br /> |10 hp / 7.46 kW<br /> |10 hp / 7.46 kW<br /> |-<br /> |Hydraulic Pump<br /> |16 gal/min / 61 L/min<br /> |16 gal/min / 61 L/min<br /> |16 gal/min / 61 L/min<br /> |-<br /> |Power Unit<br /> |Hydraulic, Variable Displacement<br /> |Hydraulic, Variable Displacement<br /> |Hydraulic, Variable Displacement<br /> |-<br /> |Operating Pressure<br /> |1,500 psi / 103 bar<br /> |1,500 psi / 103 bar<br /> |1,500 psi / 103 bar<br /> |-<br /> |Vacuum Pump<br /> |1/3 hp / 0.25 kW<br /> |1/3 hp / 0.25 kW<br /> |1/3 hp / 0.25 kW<br /> |-<br /> |Vacuum<br /> |21&quot; Hg / 711 mbar<br /> |21&quot; Hg / 711 mbar<br /> |21&quot; Hg / 711 mbar<br /> |-<br /> |Full Load Capacity<br /> |10,000 lb / 4535 kg<br /> |10,000 lb / 4535 kg<br /> |10,000 lb / 4535 kg<br /> |-<br /> |Weight (Empty)<br /> |8,000 lb / 3629 kg<br /> |8,300 lb / 3765 kg<br /> |8,600 lb / 3901 kg<br /> |-<br /> |Total Compartment Rollers / Powered<br /> |11/5<br /> |11/5<br /> |11/5<br /> |-<br /> |Guide Track<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |-<br /> |Overall Dimensions (L x W x H)<br /> |156.5&quot; x 72&quot; x 158.188&quot;<br /> <br /> 3975 mm x 1829 mm x 4018 mm<br /> |180.5&quot; x 72&quot; x 158.188&quot;<br /> <br /> 4585 mm x 1829 mm x 4018 mm<br /> |192.5&quot; x 72&quot; x 160.688&quot;<br /> <br /> 4890 mm x 1829 mm x 4081 mm<br /> |-<br /> |Vacuum Arm Reach<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |-<br /> |Vacuum Arm Reach (Hydraulic Extension)<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |-<br /> |Magnet Arm Reach (Hydraulic Extension) Truck Side<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |-<br /> |Wheel Base<br /> |98&quot; / 2489 mm<br /> |122&quot; / 3099 mm<br /> |134&quot; / 3404 mm<br /> |-<br /> |Drive Wheel Center Line<br /> |51&quot; / 1295 mm<br /> |51&quot; / 1295 mm<br /> |51&quot; / 1295 mm<br /> |-<br /> |Battery Compartment Width<br /> |24&quot; / 610 mm<br /> |36&quot; / 915 mm<br /> |42&quot; / 1067 mm<br /> |-<br /> |Maximum Battery Dimensions<br /> <br /> (L x W x H)<br /> |48&quot; x 23&quot; x 34&quot;<br /> <br /> 1219 mm x 584 mm x 864 mm<br /> |48&quot; x 35&quot; x 34&quot;<br /> <br /> 1219 mm x 889 mm x 864 mm<br /> |48&quot; x 41&quot; x 34&quot;<br /> <br /> 1219 mm x 1041 mm x 864 mm<br /> |-<br /> |Minimum Battery Width<br /> <br /> (with vacuum / magnet)<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |-<br /> |Minimum Battery Height<br /> |17.75&quot; / 451 mm<br /> |17.75&quot; / 451 mm<br /> |17.75&quot; / 451 mm<br /> |-<br /> |Ground Clearance<br /> |0.63&quot; / 16 mm<br /> |0.63&quot; / 16 mm<br /> |0.63&quot; / 16 mm<br /> |-<br /> |Roller Height<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |-<br /> ! colspan=&quot;4&quot; |NOTES<br /> |-<br /> | colspan=&quot;4&quot; |''Specifications may vary ± 5% because of temperature, floor considerations, and operator efficiency. Values represented under normal operating conditions.''<br /> |-<br /> | colspan=&quot;4&quot; |''* Varies with battery case thickness and condition.''<br /> |}<br /> <br /> === UNITS WITH 20 HP POWER UNIT USED DECEMBER, 2014 TO PRESENT ===<br /> {| class=&quot;wikitable&quot;<br /> !<br /> !BE-24-2-TS<br /> !BE-36-2-TS<br /> !BE-42-2-TS<br /> |-<br /> |Travel Speed<br /> |0 to 240 ft/min / 0 to 1.22 m/s<br /> |0 to 240 ft/min / 0 to 1.22 m/s<br /> |0 to 240 ft/min / 0 to 1.22 m/s<br /> |-<br /> |Raise - Lower Speed<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |-<br /> |Powered Roller Speed<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |-<br /> |Arm Traverse Speed<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |-<br /> |Arm Rotation Time<br /> |6 s to 8 s<br /> |6 s to 8 s<br /> |6 s to 8 s<br /> |-<br /> |Draw Bar Pull / Vacuum<br /> <br /> (12&quot; / 305 mm Round Cup)<br /> |1,000 lb / 454 kg<br /> |1,000 lb / 454 kg<br /> |1,000 lb / 454 kg<br /> |-<br /> |Draw Bar Pull Magnet*<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |-<br /> |Vacuum Attach Time<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |-<br /> |Vacuum Release Time<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |-<br /> |Input Voltage<br /> |480 V / 3 ph / 60Hz<br /> |480 V / 3 ph / 60Hz<br /> |480 V / 3 ph / 60Hz<br /> |-<br /> |AC Current Draw<br /> |35 A<br /> |35 A<br /> |35 A<br /> |-<br /> |AC Current Draw w/ Electric Drive Option<br /> |42 A<br /> |42 A<br /> |42 A<br /> |-<br /> |Control Circuit Voltage<br /> |120 V ac<br /> |120 V ac<br /> |120 V ac<br /> |-<br /> |Hydraulic Power Unit<br /> |20 hp / 14.9 kW<br /> |20 hp / 14.9 kW<br /> |20 hp / 14.9 kW<br /> |-<br /> |Hydraulic Power Unit w/ Electric Drive Option<br /> |25 hp / 18.7 kW<br /> |25 hp / 18.7 kW<br /> |25 hp / 18.7 kW<br /> |-<br /> |Hydraulic Pump<br /> |22 gal/min / 83 L/min<br /> |22 gal/min / 83 L/min<br /> |22 gal/min / 83 L/min<br /> |-<br /> |Power Unit<br /> |Hydraulic, Variable Displacement<br /> |Hydraulic, Variable Displacement<br /> |Hydraulic, Variable Displacement<br /> |-<br /> |Operating Pressure<br /> |1,500 psi / 103 bar<br /> |1,500 psi / 103 bar<br /> |1,500 psi / 103 bar<br /> |-<br /> |Vacuum Pump<br /> |1/3 hp / 0.25 kW<br /> |1/3 hp / 0.25 kW<br /> |1/3 hp / 0.25 kW<br /> |-<br /> |Vacuum<br /> |21&quot; Hg / 711 mbar<br /> |21&quot; Hg / 711 mbar<br /> |21&quot; Hg / 711 mbar<br /> |-<br /> |Full Load Capacity<br /> |10,000 lb / 4535 kg<br /> |10,000 lb / 4535 kg<br /> |10,000 lb / 4535 kg<br /> |-<br /> |Weight (Empty)<br /> |8,000 lb / 3629 kg<br /> |8,300 lb / 3765 kg<br /> |8,600 lb / 3901 kg<br /> |-<br /> |Total Compartment Rollers / Powered<br /> |11/5<br /> |11/5<br /> |11/5<br /> |-<br /> |Guide Track<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |-<br /> |Overall Dimensions (L x W x H)<br /> |156.5&quot; x 72&quot; x 158.188&quot;<br /> <br /> 3975 mm x 1829 mm x 4018 mm<br /> |180.5&quot; x 72&quot; x 158.188&quot;<br /> <br /> 4585 mm x 1829 mm x 4018 mm<br /> |192.5&quot; x 72&quot; x 160.688&quot;<br /> <br /> 4890 mm x 1829 mm x 4081 mm<br /> |-<br /> |Vacuum Arm Reach<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |-<br /> |Vacuum Arm Reach (Hydraulic Extension)<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |-<br /> |Magnet Arm Reach (Hydraulic Extension) Truck Side<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |-<br /> |Wheel Base<br /> |98&quot; / 2489 mm<br /> |122&quot; / 3099 mm<br /> |134&quot; / 3404 mm<br /> |-<br /> |Drive Wheel Center Line<br /> |51&quot; / 1295 mm<br /> |51&quot; / 1295 mm<br /> |51&quot; / 1295 mm<br /> |-<br /> |Battery Compartment Width<br /> |24&quot; / 610 mm<br /> |36&quot; / 915 mm<br /> |42&quot; / 1067 mm<br /> |-<br /> |Maximum Battery Dimensions<br /> <br /> (L x W x H)<br /> |48&quot; x 23&quot; x 34&quot;<br /> <br /> 1219 mm x 584 mm x 864 mm<br /> |48&quot; x 35&quot; x 34&quot;<br /> <br /> 1219 mm x 889 mm x 864 mm<br /> |48&quot; x 41&quot; x 34&quot;<br /> <br /> 1219 mm x 1041 mm x 864 mm<br /> |-<br /> |Minimum Battery Width<br /> <br /> (with vacuum / magnet)<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |-<br /> |Minimum Battery Height<br /> |17.75&quot; / 451 mm<br /> |17.75&quot; / 451 mm<br /> |17.75&quot; / 451 mm<br /> |-<br /> |Ground Clearance<br /> |0.63&quot; / 16 mm<br /> |0.63&quot; / 16 mm<br /> |0.63&quot; / 16 mm<br /> |-<br /> |Roller Height<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |-<br /> ! colspan=&quot;4&quot; |NOTES<br /> |-<br /> | colspan=&quot;4&quot; |''Specifications may vary ± 5% because of temperature, floor considerations, and operator efficiency. Values represented under normal operating conditions.''<br /> |-<br /> | colspan=&quot;4&quot; |''* Varies with battery case thickness and condition.''<br /> |}<br /> ==&lt;big&gt;Pre-Installation Check&lt;/big&gt;==<br /> ===&lt;big&gt;&lt;u&gt;Floor Conditions&lt;/u&gt;&lt;/big&gt;===<br /> The floor is the single most critical area of the battery room.  A bad floor can cause significant issues with the installation as well as downtime and maintenance problems with the extractor.  The floor should be verified as to its minimum thickness and strength with user.  As noted on the drawing, the specific requirement of flatness for your particular type of system is listed. Below is a chart stating floor requirements.  If possible, especially on double stack and higher systems, a digital level should be used to shoot the grade for compliance with the specification.  The floor should also be inspected for severe cracks or excessively wide expansion joints in the travel path of the machine.  If floor drains are present, they must not have a grade to the opening that encroaches into the travel path. <br /> <br /> F-min is a rating method used to evaluate the flatness and levelness of a floor designated as &quot;defined travel path&quot;.  For example, an F-min rating of 60 means that there is no more than .129&quot; of variation in the transverse axis (wheels left to right) and .287&quot; variation in the longitudinal axis (front to back) on the equipment.<br /> <br /> To avoid potential damage to drive wheel assemblies, guide track, structural components, guide rollers  and issues with the inner frame equalization the &quot;defined travel path&quot; of the Battery Extractor should meet or exceed the recommended F-min specification. See chart below for the model specifications.<br /> {| class=&quot;wikitable&quot;<br /> !Model<br /> !F-Min<br /> !+/- Longitudinal<br /> !+/- Transverse<br /> !Slope Defect<br /> |-<br /> |SL, DS<br /> |40<br /> |.287&quot;<br /> |.192&quot;<br /> |.096&quot;<br /> |-<br /> |TS<br /> |60<br /> |.186&quot;<br /> |.129&quot;<br /> |.066&quot;<br /> |-<br /> |QS<br /> |85<br /> |.131&quot;<br /> |.091&quot;<br /> |.047&quot;<br /> |}[[File:IOP-400 BE-SL&amp;DS (10-23) Floor Conditions Pre-Installation Check.png|alt=BE-TS Floor Conditions Pre-Installation Check|frameless|500x500px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Floor_Conditions_Pre-Installation_Check.png]]<br /> ==&lt;big&gt;Operating Controls &amp; Instructions&lt;/big&gt;==<br /> <br /> === &lt;big&gt;&lt;u&gt;Operator Console&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Operator Console.png|alt=BE-TS Operator Console|frameless|1080x1080px]]<br /> <br /> '''''NOTE:''' Safety devices for the machine and the machine operating area SHALL NOT be rendered inoperable or misused.'' <br /> <br /> ''Typical BE-TS operator console shown above. Position of optional controls may vary from that shown depending on age of unit and/or combination of optional controls present.''<br /> <br /> ''HMI display standard on units shipped after February, 2020 for Industrial Internet of Things (IIoT) package.''<br /> <br /> ==== &lt;u&gt;&lt;big&gt;Safety Features&lt;/big&gt;&lt;/u&gt; ====<br /> &lt;u&gt;Key Switch&lt;/u&gt; – Located on the dash (see above).  Primary on/off switch to prevent unauthorized personnel from operating the BE.<br /> <br /> &lt;u&gt;Emergency Stop&lt;/u&gt; – Located on the dash (see above). Will stop all functions immediately, locking all hydraulics in place. To use, press down on the red button. The machine key must be used to reset the emergency stop.<br /> <br /> &lt;u&gt;Foot Switch&lt;/u&gt; – Must be depressed to operate the BE.  Stepping off the foot switch will stop all functions immediately, locking all hydraulics in place.  To resume use, depress the foot switch.<br /> <br /> &lt;u&gt;Gate Switch&lt;/u&gt; – The gate must be fully closed for the BE to operate.<br /> <br /> &lt;u&gt;Extractor Arm Switch&lt;/u&gt; – Does not permit the machine to move forward or backward unless the extractor arm is located in the center of the carriage between the indicating arrows located on the arm guard.<br /> <br /> &lt;u&gt;Powered Roller Cutout (PRC-1 or PRC-2) ''(if equipped)''&lt;/u&gt; – Disengages the powered roller function when the photo eye positioned on the edge of the BE battery compartment is disrupted by a battery, requiring additional input from the operator. Pressing the &quot;Power Roller Cutout&quot; override button (see above) on the dash will resume  powered roller operation when loading or unloading batteries from the BE carriage.<br /> <br /> &lt;u&gt;Horn ''(If equipped)''&lt;/u&gt; – Button located on the dash (see above).  Used to alert personnel before moving the BE.<br /> <br /> &lt;u&gt;Strobe Light ''(If equipped)''&lt;/u&gt; – Located on a vertical stanchion mounted to the right rear of the operator compartment. For units equipped with optional overhead guard (OHG), the beacon is located above of the operator compartment.  Beacon automatically flashes when the BE is switched on to visually notify the BE is in use.<br /> <br /> &lt;u&gt;Audible Alarm ''(if equipped)''&lt;/u&gt; – Mounted in the same location as the Strobe Light.  Automatically sounds when the BE is switched on to notify personnel that the BE is in use.<br /> <br /> &lt;u&gt;Blue Light ''(if equipped)''&lt;/u&gt; - Mounted at an elevated position on either end of the extractor which project a bright, highly concentrated blue beam pattern on the ground visually alerting personnel to the direction the extractor is moving.<br /> <br /> === &lt;big&gt;&lt;u&gt;Operation Overview&lt;/u&gt;&lt;/big&gt; ===<br /> <br /> * All operators should be familiar with the operator console of the extractor before performing any battery changes.  The controls of the console are simple and well marked.  It consists of six, manually operated, hydraulic control valves and a three position selector switch which controls the left and right vacuum cups (or optional magnets).<br /> * The operator shall make certain there are no persons or obstacles in the extractor path prior to traveling forward or reverse.<br /> * All manual valves are moved in the direction of the function travel which it controls with exception of the lift/lower valve, which is pulled toward the operator for &quot;up&quot; and pushed away for &quot;down.&quot;<br /> * In the event of any failure or malfunction, step off the dead-man switch or press the E-stop button and all functions will stop immediately, locking all hydraulics in place.<br /> * The extractor arm must be in the center of the carriage or the unit will not travel forward or reverse.<br /> * To ensure smooth operation, all valve movements should be made in a slow, deliberate motion.<br /> * Only one key should be provided to operate the extractor.<br /> * When leaving the machine, the operator shall turn off the key switch, remove the key and logout out of the IIoT (if equipped) to prevent unauthorized use<br /> * Ensure all the batteries and cables are properly stored in the battery stands prior to moving the BE.<br /> * The BE is designed to carry only one battery in each compartment on the carriage.<br /> * When loading the BE, position the batteries in the center of the compartments on the powered rollers to prevent any battery movement when transporting.<br /> * Ensure there are no projections outside of the carriage before moving the BE.<br /> <br /> === &lt;u&gt;&lt;big&gt;Operating Instructions&lt;/big&gt;&lt;/u&gt; ===<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Pre-Change Out Preparation&lt;/u&gt;&lt;/big&gt; ====<br /> 1. Position lift truck for change out in designated area.<br /> <br /> 2. Remove all battery restraints and disconnect battery cables following manufacturers guidelines.  (Be sure to position battery cables so as not to be damaged by the battery during change out.)<br /> <br /> 3. Board battery extractor and close safety gate.  (Gate must be fully closed or unit will not operate.)<br /> <br /> 4. Turn key switch to &quot;ON&quot; position. <br /> <br /> 5. Log in on the HMI display (if equipped with BE-IIoT package).<br /> <br /> 6. Depress foot pedal.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Discharged Battery Removal&lt;/u&gt;&lt;/big&gt; ====<br /> 1. Move extractor forward or reverse to position center of empty compartment with center of lift truck battery compartment. (Lead roller of extractor is equipped with a centering groove.  Users may find it beneficial to mark center of lift truck compartment to aid in alignment.)<br /> <br /> 2. Align extractor's roller compartment height with lift truck's battery compartment.<br /> <br /> 3. Rotate extractor arm into battery compartment aligned in Step 2.<br /> <br /> 4. Move extractor arm toward battery until vacuum cup/magnet contacts battery.<br /> <br /> [[File:NOTICE-warn.png|alt=NOTICE|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:NOTICE-warn.png]] '''DO NOT force cup/magnet into battery after initial contact with battery is made.'''<br /> <br /> 5. Energize vacuum/magnet by turning selector switch to proper direction, left or right.<br /> <br /> 6. Move extractor arm away from lift truck toward center of extractor roller bed, removing discharged battery.  (Battery should be pulled past first three idler rollers onto first or second powered roller.)<br /> <br /> 7. Turn off vacuum/magnet and move extractor arm away from battery 1&quot; to 2&quot;.<br /> <br /> 8. Rotate extractor arm out of battery compartment into opposite compartment (if empty) and center arm in carriage.<br /> <br /> 9. Move battery into center of compartment using powered rollers.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Charged Battery Retrieval&lt;/u&gt;&lt;/big&gt; ====<br /> 1. Locate charged battery for appropriate type of lift truck being changed.<br /> <br /> 2. Raise battery extractor roller compartment to proper level to gain access as needed to disconnect desired battery from its charger and disengage battery safety stop.<br /> <br /> [[File:WARNING-warn.png|alt=WARNING|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:WARNING-warn.png]] '''ALWAYS be sure charging has been completed and charger is not still charging battery. Dangerous sparking/arcing can occur if battery is unplugged from charger while charging.'''<br /> <br /> 3. Move extractor to appropriate rack position and align empty roller compartment with the center of the battery storage rack compartment.  ''(The battery safety stop of each compartment is the center of that compartment and should be used for alignment with the groove in the lead roller of the battery extractor compartment.'') <br /> <br /> 4. Rotate arm into empty compartment (if not already positioned there.)<br /> <br /> 5. Move extractor arm toward battery until vacuum cup/magnet contacts battery.<br /> <br /> 6. Energize vacuum cup/magnet by turning selector switch to proper direction, left or right.<br /> <br /> [[File:NOTICE-warn.png|alt=NOTICE|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:NOTICE-warn.png]] '''DO NOT force cup/magnet into battery after initial contact with battery is made.'''<br /> <br /> 7. Move extractor arm away from battery rack toward center of extractor roller bed, removing charged battery.  (Battery should be pulled past first three idler rollers onto first or second powered roller.)<br /> <br /> 8. Turn off vacuum/magnet and move extractor arm away from battery 1&quot; to 2&quot;.<br /> <br /> 9. Rotate extractor arm out of battery compartment into fully vertical position.<br /> <br /> 10. Move battery into center of compartment using powered rollers.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Discharged Battery Return&lt;/u&gt;&lt;/big&gt; ====<br /> 1. If required, adjust extractor compartment height to battery rack level with open battery compartment.  Drive extractor to align roller compartment containing discharged battery with open battery compartment.<br /> <br /> 2. Return discharged battery to battery rack using powered rollers.<br /> <br /> '''''NOTE:''''' ''In most instances, batteries can be deposited into battery racks in one motion using only powered rollers.  When this does not work, the battery may need slight assistance from extractor arm.  To do this, rotate arm into compartment such as one would if removing battery from rack.  If extractor is vacuum equipped, position top edge of cup slightly higher than edge of battery (or over lifting eye if so equipped) to prevent cup from adhering to battery - No vacuum/magnet is necessary for pushing. DO NOT activate vacuum/magnet switch.  Slowly push battery into rack until fully into compartment.''<br /> <br /> 3. Engage battery safety stop and connect battery to charger as required.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Charged Battery Installation&lt;/u&gt;&lt;/big&gt; ====<br /> 1. Lower extractor to fully lowered position.<br /> <br /> 2. Drive extractor back to lift truck and align roller compartment containing charged battery as performed in steps 1 and 2 of &quot;Discharged Battery Removal&quot;.<br /> <br /> 3. Move charged battery toward lift truck compartment by using powered rollers, verifying precise battery alignment.<br /> <br /> [[File:NOTICE-warn.png|alt=NOTICE|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:NOTICE-warn.png]] '''Many batteries are a tight fit into lift truck battery compartments. Care MUST be taken to ensure alignment is precise to avoid damage to battery, lift truck, and/or battery extractor.'''<br /> <br /> 4. Adjust extractor vertically as well as horizontally, if needed<br /> <br /> 5. Insert battery into lift truck as far as possible using only the powered rollers.<br /> <br /> 6. Rotate extractor arm into compartment and SLOWLY push battery into lift truck.  (Be sure to watch battery cables for interference.)<br /> <br /> 7. Return extractor arm to center of roller bed and lower extractor to fully lowered position.  Drive extractor out of immediate area.<br /> <br /> 8. Turn off key switch, remove key from switch, log out on the HMI display (if equipped with BE-IIoT package) and carefully exit extractor.<br /> <br /> 9. Secure newly installed battery in lift truck and reconnect battery cables.<br /> <br /> 10. Return lift truck to service<br /> {|<br /> ![[File:Caution-Warning.png|alt=CAUTION|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:Caution-Warning.png]]<br /> |'''DO NOT drive the BE into the travel path end stops. The end stops are designed to prevent the BE from accidentally traveling beyond its designated travel path. Driving the BE into the end stops will cause the BE to stop suddenly, possibly causing damage to the end stop, the BE and/or personal injury.'''<br /> |}<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Optional Powered Roller Cutout Operation&lt;/u&gt;&lt;/big&gt; ====<br /> Units equipped with optional Powered Roller Cutout, the powered roller override button must be depressed in addition to actuating the hydraulic valve when a battery disrupts the photo eye(s) at the edge of the battery compartments while using the powered rollers to transfer batteries on and off of the battery extractor.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;IIoT Equipped Units&lt;/u&gt;&lt;/big&gt; ====<br /> Units shipped after February, 2020 are equipped with BE-IIoT (Industrial Internet of Things) package. Operators must log in to the BE-IIoT system using the HMI (Human Machine Interface) display located on the dashboard to operate the extractor.<br /> <br /> When finished operating the extractor, the operator should log out of the BE-IIoT to prevent unauthorized access and/or operation of the extractor.<br /> <br /> == &lt;big&gt;Manual Unloading&lt;/big&gt; ==<br /> '''Lockout/tagout and de-energize all equipment prior to manually unloading any battery.'''<br /> <br /> In the event of power loss or an operational malfunction of the BE not allowing a battery to be unloaded using normal operating procedures, it is recommended a battery be removed from the BE using certified and approved vertical extraction methods and devices.<br /> {|<br /> |[[File:DANGER-warn.png|alt=DANGER|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:DANGER-warn.png]]<br /> |'''Read, understand and observe all safety warnings and procedures related to the vertical extraction device(s) being used.'''<br /> |}<br /> Should the status of the BE not allow for safe vertical extraction (due to position in the battery aisle or level of the inner carriage), only repairs required to safely maneuver the BE to a position allowing for safe vertical extraction should be made.  Once any batteries are safely unloaded, any remaining repairs can be made.<br /> {|<br /> |[[File:DANGER-warn.png|alt=DANGER|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:DANGER-warn.png]]<br /> |'''Extreme care should be taken when working under or around equipment supporting elevated loads. Unexpected movement of the equipment could cause the load and/or equipment to fall. ALWAYS be sure devices of adequate size and strength are in place to prevent any personnel working under the elevated load from being crushed. Serious personal injury or death will occur.'''<br /> |}<br /> <br /> == &lt;big&gt;Spare Parts List&lt;/big&gt; ==<br /> Use only BHS approved replacement parts.<br /> <br /> Refer to the appropriate Spare Parts Kit (vacuum equipped units - Pt# BE-SPKV-TS, magnet equipped units - Pt# BE-SPKM-TS) for the list of items recommended by BHS to have on hand for BE-TS models to minimize any downtime due to minor breakdowns that may occur under normal operating conditions.<br /> <br /> BHS offers many replacement parts kits containing relevant or related parts when replacing certain individual parts or replacing any obsolete / upgraded parts.<br /> <br /> BHS also offers a supplement hose kit (Pt# 80342003) which contains an assortment of hoses allowing any hose on the extractor to be replaced immediately with a temporary hose of equal length or longer. After the extractor is back up and running, the failed hose can be taken to have an exact replacement made. Once the new hose is made and installed, the temporary hose can be returned to the kit for future use.<br /> <br /> Go to [[www.bhs1.com]] and click &quot;Parts&quot; for all the latest parts kits and corresponding installation instructions (if applicable).<br /> <br /> BHS recommends that a full maintenance inspection report similar to the one provided be done at least once a month.<br /> <br /> Any parts found to be excessively worn or damaged should promptly be replaced unless said parts pose a safety risk to the operator and/or extractor, in which case the unit should be removed from service until the problem(s) are remedied (See<br /> <br /> Operator's Daily Checklist.)<br /> <br /> ''Note: Spare parts kits contain parts for the most current machine design/configuration. Due to continuous design and manufacturing updates and improvements, not all the parts in the spare parts kits may be compatible with older units. Consult factory when ordering spare or replacement parts for existing units in the field to ensure part compatibility.''<br /> <br /> = &lt;big&gt;Parts Sections&lt;/big&gt; =<br /> <br /> == &lt;big&gt;Chassis&lt;/big&gt; ==<br /> <br /> === &lt;big&gt;&lt;u&gt;Equalization Components&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Equalization Components.png|alt=BE-TS Chassis Equalization|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PT0222-1<br /> |LINK-CONNECTING-#60<br /> |<br /> |<br /> |8<br /> |-<br /> |2<br /> |HW0017<br /> |NUT-HEX-3/4-10<br /> |<br /> |<br /> |8<br /> |-<br /> |3<br /> |HW0115<br /> |WASHER-LOCK-3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |43097001<br /> |STUD-ANCHOR-5&quot;<br /> |<br /> |''Upper''<br /> |4<br /> |-<br /> |5<br /> |HW0020<br /> |NUT-JAM-3/4-10<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43097002<br /> |STUD-ANCHOR-2&quot;<br /> |<br /> |''Lower''<br /> |4<br /> |-<br /> |7<br /> |00158001-14<br /> |CHAIN-ROLLER-#60<br /> |<br /> |<br /> |4<br /> |}<br /> [[File:BE-TS Equalization Components - 1.0.2.png|alt=BE-TS Chassis Equalization 2|frameless|575x575px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PT0416<br /> |COLLAR-SHAFT-1 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |2<br /> |43097006<br /> |KEY-3/8&quot; X 2 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |PT0224<br /> |SPROCKET-60B12 X 1 1/2&quot;<br /> |<br /> |''Keyed in line''<br /> |8<br /> |-<br /> |4<br /> |PT0405<br /> |FLANGE BEARING-2 BOLT-1 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1 1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |6<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> | rowspan=&quot;4&quot; |7<br /> |43127001<br /> |SHAFT-EQUALIZATION-81.75&quot;<br /> |<br /> |''BE-24-2-TS''<br /> |2<br /> |-<br /> |43327001<br /> |SHAFT-EQUALIZATION-105.75&quot;<br /> |<br /> |''BE-36-2-TS''<br /> |2<br /> |-<br /> |44327001<br /> |SHAFT-EQUALIZATION-117.75&quot;<br /> |<br /> |''BE-42-2-TS''<br /> |2<br /> |-<br /> |44527001<br /> |SHAFT-EQUALIZATION-75.75&quot;<br /> |<br /> |''BE-42-1-TS''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |8<br /> |PT0503<br /> |BEARING-FLANGED LOAD-2 1/4&quot;<br /> |<br /> |''Used after December 2003''<br /> |8<br /> |-<br /> |43026001<br /> |BEARING-FLANGED LOAD-2 1/4&quot; ''(MACHINED)''<br /> |<br /> |''Used prior to December 2003''<br /> |8<br /> |-<br /> |9<br /> |HW0025<br /> |NUT-JAM-7/8-14<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0117<br /> |WASHER-LOCK-7/8&quot; ''(NOT SHOWN)''<br /> |<br /> |''Used prior to August 2002''<br /> |8<br /> |}<br /> <br /> === &lt;u&gt;'''&lt;big&gt;Bridge &amp; Cross Bar&lt;/big&gt;'''&lt;/u&gt; ===<br /> [[File:BE-TS Bridge and Cross Bar.png|alt=BE-TS Bridge and Cross Bar|frameless|524x524px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1 1/4&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |2<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |20<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |20<br /> |-<br /> |4<br /> |HW0515<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |''Fully Threaded''<br /> |8<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> === &lt;u&gt;'''&lt;big&gt;Lift Cylinder Connections&lt;/big&gt;'''&lt;/u&gt; ===<br /> [[File:BE-TS Lift Cylinder Connections.png|alt=BE-TS Lift Cylinder Connections|frameless|589x589px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |00158001-13<br /> |CHAIN-ROLLER-#80<br /> |<br /> |<br /> |4<br /> |-<br /> |2<br /> |HW0014<br /> |NUT-HEX-1-8<br /> |<br /> |<br /> |8<br /> |-<br /> |3<br /> |43897002<br /> |STUD-LIFT-INNER FRAME<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |PT0204<br /> |LINK-CONNECTING-#80<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |43897001<br /> |STUD-LIFT-OUTER FRAME<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43815018<br /> |BRACKET-CYLINDER SUPPORT<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |SS0761<br /> |U-BOLT-CYLINDER MOUNTING<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |12<br /> |-<br /> |9<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |10<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |8<br /> |-<br /> | rowspan=&quot;2&quot; |11<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |<br /> |''Idler caster end of unit'' <br /> |2<br /> |-<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |''Drive wheel end of unit'' <br /> |2<br /> |-<br /> |12<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |14<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |43822002<br /> |CLEVIS ASSEMBLY<br /> |<br /> |''Sold as assembly only''<br /> |4<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Guidance Arm&lt;/big&gt;&lt;/u&gt;''' ===<br /> [[File:BE-TS Guidance Arm.png|alt=BE-TS Guidance Arm|frameless|562x562px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> ! colspan=&quot;2&quot; |NO. REQ<br /> |-<br /> |1<br /> |43015011<br /> |GUIDE ARM WELDMENT, 2 ROLLER<br /> |<br /> |<br /> |2<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |2<br /> |43017025<br /> |SPACER-GUIDE ARM<br /> |<br /> |''† 1/2&quot; thick''<br /> |4<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |3<br /> |41215204<br /> |GUIDE ARM WELDMENT, 4 ROLLER<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |2<br /> |-<br /> |4<br /> |41217274<br /> |SPACER-GUIDE ARM<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |4<br /> |-<br /> |5<br /> |43012007<br /> |CAM ROLLER-1 3/4&quot;<br /> |<br /> |<br /> |4<br /> |8<br /> |-<br /> |6<br /> |HW0115<br /> |WASHER-LOCK-3/4&quot;<br /> |<br /> |<br /> |4<br /> |8<br /> |-<br /> |7<br /> |HW0011<br /> |NUT-HEX-3/4-16<br /> |<br /> |<br /> |4<br /> |8<br /> |-<br /> |8<br /> |HW0509<br /> |BOLT-HHCS-1/2-13 X 4-1/2&quot;<br /> |<br /> |<br /> |4<br /> |6<br /> |-<br /> |9<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |6<br /> |-<br /> |10<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |4<br /> |6<br /> |-<br /> |11<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |4<br /> |6<br /> |-<br /> |12<br /> |41215234<br /> |GUIDE ARM WELDMENT (POLY)<br /> |<br /> |<br /> |2<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |13<br /> |41217317<br /> |POLY SLIDE MOUNTING BLOCK<br /> |<br /> |<br /> |4<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |14<br /> |41217318<br /> |POLY SLIDE<br /> |<br /> |<br /> |4<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |15<br /> |HW0501<br /> |BOLT-HHCS-1/2-13 X 1&quot;<br /> |<br /> |<br /> |12<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |16<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |12<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |17<br /> |91253A546<br /> |BOLT FHSCS-1/4-20 X 1-1/2&quot;<br /> |<br /> |<br /> |8<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |18<br /> |HW0003<br /> |NUT-NILN-1/4-20<br /> |<br /> |<br /> |8<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> ! colspan=&quot;7&quot; |NOTES<br /> |-<br /> | colspan=&quot;7&quot; |''† Older units equipped with (1) 1&quot; thick spacer per guide arm bracket.'' <br /> |-<br /> | colspan=&quot;7&quot; |''†† Multiple styles of guide arms have been utilized on extractors. Refer to the parts diagrams for correct replacement parts.'' <br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Roller Bed Componenets&lt;/big&gt;&lt;/u&gt;''' ===<br /> ==== '''&lt;big&gt;''Idler Rollers''&lt;/big&gt;''' ====<br /> [[File:BE-TS Idler Rollers.png|alt=BE-TS Idler Rollers|frameless|746x746px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;3&quot; |1<br /> |43182001<br /> |LEAD ROLLER ASSEMBLY-24&quot;<br /> |<br /> |''With alignment groove''<br /> |4<br /> |-<br /> |43382001<br /> |LEAD ROLLER ASSEMBLY-36&quot;<br /> |<br /> |''With alignment groove''<br /> |4<br /> |-<br /> |43482001<br /> |LEAD ROLLER ASSEMBLY-42&quot;<br /> |<br /> |''With alignment groove''<br /> |4<br /> |-<br /> | rowspan=&quot;3&quot; |2<br /> |43182002<br /> |IDLER ROLLER ASSEMBLY-24&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |43382002<br /> |IDLER ROLLER ASSEMBLY-36&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |43482002<br /> |IDLER ROLLER ASSEMBLY-42&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> | rowspan=&quot;3&quot; |3<br /> |43187002<br /> |SHAFT-HEX-.75&quot; X 25.75&quot;<br /> |<br /> |''24&quot; compartments''<br /> |8<br /> |-<br /> |43387002<br /> |SHAFT-HEX-.75&quot; X 37.75&quot;<br /> |<br /> |''36&quot; compartments''<br /> |8<br /> |-<br /> |43487002<br /> |SHAFT-HEX-.75&quot; X 43.75&quot;<br /> |<br /> |''42&quot; compartments''<br /> |8<br /> |-<br /> | rowspan=&quot;3&quot; |4<br /> |43187003<br /> |SHAFT-HEX-.75&quot; X 27.5&quot;<br /> |<br /> |''24&quot; compartments''<br /> |4<br /> |-<br /> |43387003<br /> |SHAFT-HEX-.75&quot; X 39.5&quot;<br /> |<br /> |''36&quot; compartments''<br /> |4<br /> |-<br /> |43487003<br /> |SHAFT-HEX-.75&quot; X 45.5&quot;<br /> |<br /> |''42&quot; compartments''<br /> |4<br /> |-<br /> |5<br /> |HW1058<br /> |PIN-HITCH<br /> |<br /> |<br /> |24<br /> |}<br /> '''&lt;big&gt;''Powered Rollers''&lt;/big&gt;'''<br /> <br /> [[File:BE-TS Powered Rollers.png|alt=BE-TS Powered Rollers|frameless|546x546px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;3&quot; |1<br /> |43182003<br /> |POWERED ROLLER-24&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |43382003<br /> |POWERED ROLLER-36&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |43485003<br /> |POWERED ROLLER-42&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |2<br /> |43087001<br /> |JOURNAL-POWERED ROLLER<br /> |<br /> |<br /> |10<br /> |-<br /> |3<br /> |PT0404<br /> |FLANGE BEARING-3-BOLT-1&quot;<br /> |<br /> |<br /> |20<br /> |-<br /> |4<br /> |HW0321<br /> |BOLT-HHCS-5/16-18 X 1 1/4&quot;<br /> |<br /> |<br /> |60<br /> |-<br /> |5<br /> |HW0105<br /> |WASHER-LOCK-5/16&quot;<br /> |<br /> |<br /> |60<br /> |-<br /> |6<br /> |HW0004<br /> |NUT-HEX-5/16-18<br /> |<br /> |<br /> |60<br /> |-<br /> |7<br /> |PT0033<br /> |SPROCKET-35B18 X 1&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |8<br /> |00197028<br /> |KEY-1/4&quot; X 1 1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |00158001-16<br /> |CHAIN-ROLLER-#35<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |PT0031<br /> |LINK-CONNECTING-#35<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |PT0418<br /> |COLLAR-SHAFT-1&quot;<br /> |<br /> |<br /> |10<br /> |}<br /> [[File:BE-TS Powered Rollers Detail A.png|alt=BE-TS Powered Rollers Detail A|frameless|542x542px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0120<br /> |MOTOR-HYDRAULIC-160CC<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW1071<br /> |KEY-WOODRUFF-#808 STD<br /> |<br /> |''Supplied with Item 1''<br /> |A/R<br /> |-<br /> |3<br /> |H1544<br /> |ADAPTER-#6 JICM X #10 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |18<br /> |-<br /> |5<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |18<br /> |-<br /> |6<br /> |43017004<br /> |PLATE-MOTOR MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |PT0302-1<br /> |COUPLING BODY-#40 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |PT0301<br /> |CHAIN-COUPLING-#40<br /> |<br /> |''Includes connecting pin''<br /> |2<br /> |-<br /> |9<br /> |00197026<br /> |KEY-1/4&quot; X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43097003<br /> |KEY-1/4&quot; X 5/8&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Hose Carrier&lt;/big&gt;&lt;/u&gt;''' ===<br /> [[File:BE-TS Hose Carrier.png|alt=BE-TS Hose Carrier|frameless|550x550px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PT0629<br /> |CARRIER TRACK<br /> |<br /> |''81 links required''<br /> |10'<br /> |-<br /> |2<br /> |PT0631<br /> |BRACKET-UPPER MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0212<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0032<br /> |NUT-NILN-#10-24<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |PT0630<br /> |BRACKET-LOWER MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |7<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |43817056-2<br /> |BRACKET-CARRIER TRACK MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |HW0401<br /> |BOLT-HHCS-3/8-16 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |14<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |43817057<br /> |PLATE-CARRIER TRACK SUPPORT<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === &lt;big&gt;'''&lt;u&gt;Cable Retractor&lt;/u&gt;'''&lt;/big&gt; ===<br /> [[File:BE-TS Cable Retractor.png|alt=BE-TS Cable Retractor|frameless|585x585px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |CCR-12HD<br /> |TAKE UP REEL-CARRIER TRACK<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Operator Gate&lt;/big&gt;&lt;/u&gt;''' ===<br /> [[File:BE-TS Discontinued Drop Bar Operator Gate.png|alt=BE-TS Discontinued Drop Bar Operator Gate|frameless|568x568px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43015004<br /> |GATE-OPERATOR<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0407<br /> |BOLT-HHCS-3/8-16 X 2 3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |<br /> |<br /> |1<br /> |}<br /> [[File:BE-TS Operator Gate Continued.png|alt=BE-TS Operator Gate Continued|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43017064-2<br /> |LATCH-SWING GATE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0418<br /> |BOLT-HHCS-3/8-16 X 2 1/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0031<br /> |NUT-LOCK-3/8-16<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |N/A<br /> |HINGE-SPRING<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |5<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |HW1037<br /> |STOP-GATE<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0003<br /> |NUT-NILN-1/4-20<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |N/A<br /> |TORSION SPRING<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |11<br /> |HW0816<br /> |SCREW-HHCS-SELF DRILLING-#10 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |43806001<br /> |ANTI-FATIGUE MAT<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |43017058-2<br /> |THRESHOLD<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |HW0107<br /> |WASHER-LOCK3/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |HW9002<br /> |GAS SPRING<br /> |80292015<br /> |<br /> |1<br /> |-<br /> |19<br /> |43017086-2<br /> |BRACKET-MOUNTING-SPRING<br /> |80292015<br /> |<br /> |2<br /> |-<br /> |20<br /> |HW0815<br /> |SCREW-SELF DRILLING-#12-24 X 1&quot; T-4<br /> |80292015<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Part Discontinued. Spring Hinge and Torsion Spring must be replaced with Gas Spring Kit.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Guarding&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Outer Carriage Guards&lt;/big&gt;''''' ====<br /> <br /> ===== '''''1-Piece Outside Frame Guarding''''' =====<br /> [[File:BE-TS Outside Frame Guard 1-Piece.png|alt=BE-TS Outside Frame Guard 1-Piece|frameless|550x550px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817038<br /> |GUARD-FAR END-TOP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817037<br /> |GUARD-FAR END-MIDDLE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43817035<br /> |GUARD-FAR END-BOTTOM<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |33<br /> |}<br /> <br /> ===== '''''Split Outside Frame Guarding''''' =====<br /> [[File:BE-TS Outside Split Frame Guard.png|alt=BE-TS Outside Split Frame Guard|frameless|562x562px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817103<br /> |GUARD-FAR END-TOP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817102<br /> |GUARD-FAR END-MIDDLE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43817101<br /> |GUARD-FAR END-BOTTOM<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |37<br /> |}<br /> <br /> ==== '''&lt;big&gt;''Inner Carriage Guards''&lt;/big&gt;''' ====<br /> <br /> ===== '''''Inner Carriage Guards (Rotary Actuator)''''' =====<br /> [[File:BE-TS Inner Carriage Guard Rotary.png|alt=BE-TS Inner Carriage Guard (Rotary Actuator Units)|frameless|554x554px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817041-2<br /> |GUARD-FRONT-OPERATOR CONSOLE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817042-2<br /> |GUARD-INNER-FRAME<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |43014006-2<br /> |GUARD-LINEAR DRIVE SCREW<br /> |<br /> |<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |4<br /> |43017010-2<br /> |GUARD-SIDE-ARM CARRIER SHAFT<br /> |<br /> |<br /> |2<br /> |-<br /> |44517002-2<br /> |GUARD-SIDE-ARM CARRIER SHAFT<br /> |<br /> |''† Single compartment units only''<br /> |1<br /> |-<br /> |5<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |34<br /> |-<br /> |6<br /> |43017009-2<br /> |BRACKET-SCREW GUARD MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Single Compartment Guard replaces standard, Far Side Arm Carrier Shaft Guard.'' <br /> |}<br /> '''''Inner Carriage Guards (Helical Actuator)'''''<br /> <br /> [[File:BE-TS Inner Carriage Guard Helical Actuator.png|alt=BE-TS Inner Carriage Guard (Helical Actuator Units)|frameless|547x547px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817041-2<br /> |GUARD-FRONT-OPERATOR CONSOLE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817042-2<br /> |GUARD-INNER-FRAME<br /> |<br /> |<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |3<br /> |43017081-2<br /> |GUARD-SIDE-ARM CARRIER SHAFT<br /> |<br /> |<br /> |2<br /> |-<br /> |44517003-2<br /> |GUARD-SIDE-ARM CARRIER SHAFT<br /> |<br /> |''† Single compartment units only''<br /> |1<br /> |-<br /> |4<br /> |43017080-2<br /> |BRACKET-SIDE GUARD MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |43017082-3<br /> |MOUNT-CHAIN GUARD-LEAD SCREW<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43017082-4<br /> |MOUNT-CHAIN GUARD-LEAD SCREW<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |43017083-2<br /> |GUARD-CHAIN-LEAD SCREW<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0347<br /> |BOLT-BHSCS-1/4-20 X 3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |28<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Single Compartment Guard replaces standard, Far Side Arm Carrier Shaft Guard.'' <br /> |}<br /> <br /> ==== '''&lt;big&gt;''Dash &amp; Platform Guards''&lt;/big&gt;''' ====<br /> [[File:BE-TS Dash &amp; Platform Guards.png|alt=BE-TS Dash &amp; Platform Guards|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41614004-2<br /> |DASHBOARD-OPERATOR CONSOLE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817040<br /> |KICK PLATE-OPERATOR CONSOLE<br /> |<br /> |''41.5&quot; high''<br /> |1<br /> |-<br /> |3<br /> |43817086-2<br /> |DASHBOARD-OPERATOR CONSOLE<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43817088<br /> |KICK PLATE-OPERATOR CONSOLE<br /> |<br /> |''33.5&quot;'' ''high''<br /> |1<br /> |-<br /> |5<br /> |43817110-2<br /> |FRAME-DASHBOARD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |A/R<br /> |PLATE-DASHBOARD<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |7<br /> |HW0060<br /> |NUT-CLIP-#10-24<br /> |<br /> |<br /> |12<br /> |-<br /> |8<br /> |SS0114<br /> |BHSCS-#10-24 X 1/2&quot;-SST<br /> |<br /> |<br /> |12<br /> |-<br /> |9<br /> |PL0602<br /> |VINYL EDGING<br /> |<br /> |''At Foot Switch (Not shown)'' <br /> |1'<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Consult factory''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Lift Cylinder Guards&lt;/big&gt;''''' ====<br /> [[File:BE-TS Lift Cylinder Guards.png|alt=BE-TS Lift Cylinder Guards|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;2&quot; |1<br /> |43815016<br /> |GUARD-CLEVIS<br /> |<br /> |Operator right / Far left<br /> |2<br /> |-<br /> |43815017<br /> |GUARD-CLEVIS<br /> |<br /> |Operator left / Far right<br /> |2<br /> |-<br /> |2<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Labels &amp; Placards&lt;/big&gt;&lt;/u&gt;''' ===<br /> [[File:BE-TS Labels &amp; Placards Chassis.png|alt=BE-TS Labels &amp; Placards Chassis|frameless|546x546px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |00196616<br /> |LABEL-&quot;NO RIDERS ALLOWED&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |00196210<br /> |LABEL-WARNING-&quot;OPERATION BY AUTHORIZED PERSONNEL ONLY&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43696001<br /> |PLACARD-OFF / ON<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43096018<br /> |PLACARD-RACK LEVEL ASSIST<br /> |<br /> |''† If equipped''<br /> |1<br /> |-<br /> |5<br /> |43096015<br /> |PLACARD-PLATFORM RAISE / LOWER<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43096010<br /> |PLACARD-HORN<br /> |<br /> |''† If equipped''<br /> |1<br /> |-<br /> |7<br /> |43096016<br /> |PLACARD-DRIVE / ARM ROTATION<br /> |<br /> |<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |8<br /> |43096012<br /> |PLACARD-VACUUM OFF / ON<br /> |<br /> |''Vacuum units only''<br /> |1<br /> |-<br /> |43096011<br /> |PLACARD-MAGNET OFF / ON<br /> |<br /> |''Magnet units only (Not shown)''<br /> |1<br /> |-<br /> |9<br /> |43096017<br /> |PLACARD-POWERED ROLLER CUTOUT OVERRIDE<br /> |<br /> |''† If equipped''<br /> |1<br /> |-<br /> |10<br /> |43096013<br /> |PLACARD-POWERED ROLLERS / ARM TRAVERSE<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |00196633<br /> |LABEL-NOTICE-&quot;IN LINE VACUUM FILTER...&quot;<br /> |<br /> |''(1) per side (Vacuum units only)''<br /> |2<br /> |-<br /> |12<br /> |SM-1197<br /> |LABEL-ARM POSITION ARROW<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |00196609<br /> |LABEL-NOTICE-&quot;ARM MUST BE POSITIONED BETWEEN ARROWS...&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |00196602<br /> |LABEL-NOTICE-&quot;LUBRICATION POINTS ON UNDERSIDE&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |00196218<br /> |LABEL-WARNING-&quot;ELECTRICAL VOLTAGE HAZARD&quot;<br /> |<br /> |''Magnet units only''<br /> |1<br /> |-<br /> |16<br /> |00196238<br /> |LABEL-WARNING-&quot;STRONG MAGNETIC<br /> <br /> FIELD/DO NOT USE WITH PACEMAKER&quot;<br /> |<br /> |''†† Magnet units only''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Rack Level Assist (LAI), Horn and Powered Roller Cutout (PRC) are optional features. Not all units are equipped with these options.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Pacemaker Warning Label takes the place of the discontinued, Triangular Magnetic Field Label.''<br /> |}<br /> [[File:BE-TS Labels &amp; Placards Frame.png|alt=BE-TS Labels &amp; Placards Frame|frameless|549x549px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |00196004<br /> |LABEL-CAUTION-&quot;WATCH FOR BATTERY AND CHARGER CABLES IN TRAVEL PATH&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |00196216<br /> |LABEL-WARNING-&quot;CHAIN ENTANGLEMENT<br /> <br /> HAZARD&quot;<br /> |<br /> |''(1) per Clevis Guard'' <br /> |4<br /> |-<br /> |3<br /> |00196622<br /> |LABEL-LIFT POINT<br /> |<br /> |''(2) each end''<br /> |4<br /> |-<br /> |4<br /> |00196700<br /> |DECAL-BHS-24&quot; X 7.875&quot;<br /> |<br /> |''Far end (Not shown)''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |5<br /> |00196630<br /> |LABEL-NOTICE-HYD. OIL SPEC. (AW 68)<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |00196645<br /> |LABEL-NOTICE-HYD. OIL SPEC. (AW 32)<br /> |<br /> |''† See notes'' <br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |† Most units shipped prior to December 2014 require AW 68 Hydraulic Oil. Some units shipped prior to December 2014 shipped with AW 32 for low temperature applications.<br /> |}<br /> <br /> == &lt;big&gt;Extractor Arm&lt;/big&gt; ==<br /> {| class=&quot;wikitable&quot;<br /> !SYMBOL<br /> !DESCRIPTION / NOTICE<br /> !ACTUATOR DIAGRAM<br /> |-<br /> |[[File:IOP-400 BE-SL&amp;DS (10-23) Rotary Actuator Symbol.png|alt=Rotary Actuator Symbol|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Rotary_Actuator_Symbol.png]]<br /> |<br /> ==='''&lt;u&gt;&lt;big&gt;Rotary Actuator Symbol&lt;/big&gt;&lt;/u&gt;'''===<br /> Battery Extractors shipped prior to May 2020 are equipped with Rotary Actuator Extractor Arms. Parts Diagrams Specific to the Rotary Actuator design are indicated with the Rotary Actuator symbol.<br /> |[[File:IOP-400 BE-SL&amp;DS (10-23) Rotary Actuator Extractor Arm.png|alt=BE-TS Rotary Actuator|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Rotary_Actuator_Extractor_Arm.png]]<br /> |-<br /> |[[File:IOP-400 BE-SL&amp;DS (10-23) Helical Actuator Symbol.png|alt=Helical Actuator Symbol|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Helical_Actuator_Symbol.png]]<br /> |<br /> ===&lt;big&gt;'''&lt;u&gt;Helical Actuator Symbol&lt;/u&gt;'''&lt;/big&gt;===<br /> Battery Extractors shipped from May 2020 to Present are equipped with Helical Actuator Extractor Arms. Parts Diagrams Specific to the Rotary Actuator design are indicated with the Helical Actuator Symbol.<br /> |[[File:IOP-400 BE-SL&amp;DS (10-23) Helical Actuator Extractor Arm.png|alt=BE-TS Helical Actuator|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Helical_Actuator_Extractor_Arm.png]]<br /> |}<br /> ===&lt;big&gt;&lt;u&gt;Vacuum Components &amp; Swing Arms&lt;/u&gt;&lt;/big&gt;===<br /> ====''&lt;big&gt;Vacuum Arms (Rotary Actuator)&lt;/big&gt;''====<br /> [[File:BE-TS Vacuum Arms (Rotary Actuator).png|alt=BE-TS Vacuum Arms (Rotary Actuator)|frameless|619x619px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;2&quot; |1<br /> |N/A<br /> |ARM-PUSH/PULL-30&quot;<br /> |<br /> |''&lt;sup&gt;†&lt;/sup&gt; Discontinued''<br /> |1<br /> |-<br /> |N/A<br /> |ARM-PUSH/PULL-36&quot;<br /> |<br /> |''&lt;sup&gt;†&lt;/sup&gt; Discontinued''<br /> |1<br /> |-<br /> |2<br /> |HW0509<br /> |BOLT-HHCS-1/2-13 X 4 1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |P0505<br /> |BUSHING-RED-#6 NPT X #4 FNPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |P0402<br /> |HOSE BARB-1/4 X #4 MNPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0428<br /> |STUD-VACUUM-3/8-16 X 5&quot;<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |9<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |HW-KIT-2<br /> |<br /> |40<br /> |-<br /> |10<br /> |HW1001<br /> |SPRING-3/8&quot;<br /> |HW-KIT-2<br /> |<br /> |24<br /> |-<br /> |11<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |12<br /> |HW0424<br /> |NUT-JAM-3/8-16<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |REF<br /> |43052006<br /> |ADJUSTABLE PUSH/PULL ARM<br /> |<br /> |''Includes Items 13 through 17''<br /> |1<br /> |-<br /> |13<br /> |43057034<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |43055008<br /> |VACUUM CUP MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''&lt;sup&gt;†&lt;/sup&gt; One-piece Arms no longer available. Must replace with Adjustable Arm.''<br /> |}<br /> <br /> ====&lt;big&gt;''Vacuum Cups''&lt;/big&gt;====<br /> [[File:BE-TS Vacuum Cups.png|alt=Vacuum Cups|frameless|563x563px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;4&quot; |A/R<br /> |00162004<br /> |VACUUM CUP-10&quot; 3-PC (STANDARD)<br /> |<br /> |''&lt;sup&gt;†&lt;/sup&gt; Includes Items 1 through 4''<br /> | rowspan=&quot;4&quot; |A/R<br /> |-<br /> |00162003<br /> |VACUUM CUP-12&quot; 3-PC (STANDARD)<br /> |<br /> |''&lt;sup&gt;†&lt;/sup&gt; Includes Items 4 through 7''<br /> |-<br /> |00162007<br /> |VACUUM CUP-10&quot; 3-PC, REINFORCED<br /> |<br /> |''Includes Items 1,3,4 &amp; 8''<br /> |-<br /> |00162005<br /> |VACUUM CUP-12&quot; 3-PC, REINFORCED<br /> |<br /> |''Includes Items 4,5,7 &amp; 9''<br /> |-<br /> |1<br /> |00164006<br /> |CASTING-10&quot; VACUUM CUP<br /> |<br /> | rowspan=&quot;3&quot; |''10&quot; cup only''<br /> |1<br /> |-<br /> |2<br /> |00164004<br /> |SEAL-RUBBER-10&quot;<br /> |<br /> |1<br /> |-<br /> |3<br /> |00165002<br /> |PLATE-FRONT-10&quot;<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0311<br /> |BOLT-FHSCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |00166001<br /> |CASTING-12&quot; VACUUM CUP<br /> |<br /> | rowspan=&quot;3&quot; |''12&quot; cup only''<br /> |1<br /> |-<br /> |6<br /> |00164001<br /> |SEAL-RUBBER-12&quot;<br /> |<br /> |1<br /> |-<br /> |7<br /> |00165001<br /> |PLATE-FRONT-12&quot;<br /> |<br /> |1<br /> |-<br /> |8<br /> |00164007<br /> |SEAL-RUBBER-10&quot;-REINFORCED<br /> |<br /> |<br /> |A/R<br /> |-<br /> |9<br /> |00167003<br /> |SEAL-RUBBER-12&quot;-REINFORCED<br /> |<br /> |<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''&lt;sup&gt;†&lt;/sup&gt; 10&quot; and 12&quot; 1-Piece Cups no longer available. Must replace with 3-Piece Cup. Verify required cup size prior to ordering.''<br /> |}<br /> <br /> ====&lt;big&gt;''Swing Arms (Rotary Actuator)''&lt;/big&gt;====<br /> [[File:BE-TS Swing Arms (Rotary Actuator).png|alt=BE-TS Swing Arms (Rotary Actuator)|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> |ITEM<br /> |BHS PART NUMBER<br /> |DESCRIPTION<br /> |REF. KIT NO.<br /> |NOTES<br /> |NO. REQ<br /> |-<br /> | rowspan=&quot;3&quot; |1<br /> |45055001<br /> |TIE PLATE-SWING ARM<br /> |<br /> |BE-24-2-TS<br /> |1<br /> |-<br /> |45255001<br /> |TIE PLATE-SWING ARM<br /> |<br /> |BE-36-2-TS (NOT SHOWN)<br /> |1<br /> |-<br /> |45355001<br /> |TIE PLATE-SWING ARM<br /> |<br /> |BE-42-2-TS (NOT SHOWN)<br /> |1<br /> |-<br /> |2<br /> |43055004<br /> |SWING ARM-RHS<br /> |†<br /> |NOT SOLD INDIVIDUALLY<br /> |1<br /> |-<br /> |3<br /> |43055002<br /> |SWING ARM-LHS<br /> |†<br /> |NOT SOLD INDIVIDUALLY<br /> |1<br /> |-<br /> |4<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0113<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0010<br /> |NUT-JAM-5/8-11<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |PT0413<br /> |COLLAR-SHAFT-3&quot;<br /> |80252001<br /> |<br /> |2<br /> |-<br /> |8<br /> |43027001<br /> |SHAFT-ROTARY ACTUATOR<br /> |80252001<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW1013<br /> |KEY-3/8&quot; X 12&quot;<br /> |80252001<br /> |<br /> |1<br /> |-<br /> |10<br /> |PT0419<br /> |BEARING-SAE 841-2&quot; I.D., 3&quot; OD, 1/8&quot; THICK<br /> |80252001<br /> |<br /> |3<br /> |-<br /> |11<br /> |43052005<br /> |CAP-BEARING<br /> |<br /> |INCLUDES BEARING<br /> |2<br /> |-<br /> |12<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |13<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |14<br /> |43057014<br /> |STANDOFF-WIRE<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |HW0312<br /> |SCREW-SHSS-1/4-20 X 1&quot;-CUP POINT<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |43057003<br /> |CUSHION-SWING ARM<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |43055001<br /> |STOP-SWING ARM<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |20<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |21<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |H1565<br /> |ADAPTER-45 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |23<br /> |H1600<br /> |ADAPTER-90 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |&lt;sup&gt;†&lt;/sup&gt; ''Included in multiple kits.''<br /> |-<br /> | colspan=&quot;6&quot; |See ''Single Compartment Swing Arm Stop for the the Single Compartment Swing Arm Stop.''<br /> |}<br /> <br /> === '''''Vacuum Swing Arm Stop (Rotary Actuator)''''' ===<br /> [[File:BE-TS Single Compartment Swing Arms (Rotary Actuator).png|alt=BE-TS Single Compartment Swing Arms (Rotary Actuator)|frameless|575x575px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |44555001<br /> |STOP-SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43057003<br /> |CUSHION-SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43057008<br /> |SPACER-SWING ARM STOP<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |}<br /> ====''&lt;big&gt;Vacuum Pump (Rotary Actuator)&lt;/big&gt;''====<br /> [[File:BE-TS Vacuum Pumps (Rotary Actuator).png|alt=BE-TS Vacuum Pumps (Rotary Actuator)|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |P0005<br /> |PUMP-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |P0208<br /> |FILTER-HI FLOW<br /> |<br /> |<br /> |3<br /> |-<br /> |3<br /> |P0503<br /> |NIPPLE-#4 NPT-BRASS<br /> |<br /> |<br /> |3<br /> |-<br /> |4<br /> |P0502<br /> |TEE-#4 FNPT-BRASS<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |P0506<br /> |ELBOW-STR-90 DEG-#4 NPT-BRASS<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |P0402<br /> |HOSE BARB-1/4 X #4 NPTM-BRASS<br /> |<br /> |<br /> |6<br /> |-<br /> |7<br /> |P0207<br /> |VALVE-VACUUM RELEASE<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |P0302<br /> |HOSE-VACUUM-1/4&quot; I.D.<br /> |<br /> |''Two 6&quot; pieces''<br /> |1'<br /> |-<br /> |9<br /> |P0302<br /> |HOSE-VACUUM-1/4&quot; I.D.<br /> |<br /> |''Short Arm side''<br /> |1'<br /> |-<br /> |10<br /> |P0302<br /> |HOSE-VACUUM-1/4&quot; I.D.<br /> |<br /> |''Long Arm side''<br /> |2'<br /> |-<br /> |11<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |HW0212<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |E0624<br /> |CONNECTOR-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |15a<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |''Not shown''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |16<br /> |E0501<br /> |CORD-14-4 SW/SOW<br /> |<br /> |''Withtout Ground Connection in Arm''<br /> | rowspan=&quot;2&quot; |15'<br /> |-<br /> |E0514<br /> |CORD-16-5 SW/SOW<br /> |<br /> |<br /> |-<br /> |17<br /> |43057014<br /> |STANDOFF-CABLE<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |HW0206<br /> |SCREW-RHMS-#10-32 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |19<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |20<br /> |43057021<br /> |PLATE-STIFFENER<br /> |†<br /> |<br /> |2<br /> |-<br /> |21<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |†<br /> |<br /> |12<br /> |-<br /> |22<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |†<br /> |<br /> |12<br /> |-<br /> |23<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |†<br /> |<br /> |12<br /> |-<br /> |24<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |†<br /> |''Not shown''<br /> |24<br /> |-<br /> |25<br /> |P0111<br /> |FILTER-VACUUM-INLINE<br /> |<br /> |''Not shown''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |&lt;sup&gt;†&lt;/sup&gt; ''Included in multiple kits.''<br /> |}<br /> ===&lt;u&gt;&lt;big&gt;Rotary Actuator&lt;/big&gt;&lt;/u&gt;===<br /> [[File:BE-TS Rotary Actuator.png|alt=BE-TS Rotary Actuator|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43046001<br /> |ROTARY ACTUATOR<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |80000002<br /> |ROTARY ACTUATOR BASE ASSEMBLY<br /> |<br /> |''Without Actuator''<br /> |1<br /> |-<br /> |2A<br /> |N/A<br /> |VERTICAL CARRIER PLATE-OUTER<br /> |<br /> |''Included with 80000002''<br /> |2<br /> |-<br /> |2B<br /> |N/A<br /> |VERTICAL CARRIER PLATE-INNER<br /> |<br /> |''Included with 80000002''<br /> |1<br /> |-<br /> |2C<br /> |N/A<br /> |CARRIER BASE PLATE<br /> |<br /> |''Included with 80000002''<br /> |1<br /> |-<br /> |3<br /> |HW1070<br /> |PIN-PULL DOWEL-5/8&quot; X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0508<br /> |BOLT-SHCS-1/2-13 X 3/4&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW1045<br /> |PIN-PULL DOWEL-3/8&quot; X 1 1/2&quot;<br /> |<br /> |''Included with 80000002''<br /> |6<br /> |-<br /> |6<br /> |HW0412<br /> |BOLT-SHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |''Included with 80000002''<br /> |12<br /> |-<br /> |7<br /> |H0010<br /> |FITTING-BULKHEAD-3/4-16 X #4 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 NPTM<br /> |<br /> |<br /> |2<br /> |}<br /> ===&lt;u&gt;&lt;big&gt;Carrier Shafts &amp; Bearings ''(Rotary Actuator)''&lt;/big&gt;&lt;/u&gt;===<br /> [[File:BE-TS Rotary Actuator Carrier Shafts.png|alt=BE-TS Carrier Shafts (Rotary Actuator)|frameless|560x560px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43057045<br /> |CARRIER SHAFT-EXTRACTOR ARM<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |2<br /> |43054007<br /> |BEARING-EXTRACTOR ARM CARRIER<br /> |80252002<br /> |''†† See notes''<br /> |4<br /> |-<br /> |3<br /> |HW0412<br /> |BOLT-SHCS-3/8-16 X 1 1/4&quot;<br /> |80252002<br /> |<br /> |16<br /> |-<br /> |4<br /> |PT0413<br /> |COLLAR-SHAFT-3&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |PT0624<br /> |FITTING-ZERK<br /> |80252002<br /> |''Not shown''<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Vacuum_Extended_Reach_(Rotary_Actuator) Vacuum Extended Reach (Rotary Actuator)] section for Extended Reach equipped units.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Carrier_Shafts_&amp;_Bearings Carrier Shafts &amp; Bearings (Helical Actuator)] section for Helical Actuator equipped units.''<br /> |}<br /> <br /> ===&lt;u&gt;&lt;big&gt;Drive Screw Components ''(Rotary Actuator)''&lt;/big&gt;&lt;/u&gt;===<br /> ====''&lt;big&gt;Drive Nut Assembly (Rotary Actuator)&lt;/big&gt;''====<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Drive Nut Assembly Rotary Actuator.png|alt=BE-SL&amp;DS Drive Nut Assembly Rotary Actuator|frameless|537x537px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Drive_Nut_Assembly_Rotary_Actuator.png]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43054006<br /> |DRIVE NUT ASSEMBLY<br /> |80252003<br /> |&lt;sup&gt;''†''&lt;/sup&gt; ''See notes''<br /> |1<br /> |-<br /> |2<br /> |HW0426<br /> |BOLT-SHCS-3/8-16 X 5 1/2&quot;<br /> |80252003<br /> |&lt;sup&gt;''††''&lt;/sup&gt; ''See notes''<br /> |4<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |80252003<br /> |&lt;sup&gt;''††''&lt;/sup&gt; ''See notes''<br /> |4<br /> |-<br /> |4<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |80252003<br /> |&lt;sup&gt;''††''&lt;/sup&gt; ''See notes''<br /> |4<br /> |-<br /> |5<br /> |PT0624<br /> |FITTING-ZERK<br /> |80252003<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''&lt;sup&gt;†&lt;/sup&gt; See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Drive_Nut_Assembly_(Helical_Actuator) Drive Nut Assembly (Helical Actuator)] section for Helical Actuator equipped units.''<br /> |-<br /> | colspan=&quot;6&quot; |''&lt;sup&gt;††&lt;/sup&gt; It is recommended to replace mounting hardware when replacing Drive Nut Assembly.''<br /> |}<br /> ====''&lt;big&gt;Drive Screw&lt;/big&gt;''====<br /> =====''[Current] Drive Screw Assembly (Frame #'s 374 to Present)''=====<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Drive Screw Rotary Current.png|alt=Current BE-SL &amp; BE-DS Drive Screw (Rotary Actuator)|frameless|531x531px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Drive_Screw_Rotary_Current.png]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43024001<br /> |SCREW-LINEAR DRIVE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |PT0119<br /> |SPROCKET-50B15 X 1 3/16&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43097004<br /> |KEY-1/4 X 7/8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |00158001-15<br /> |CHAIN-ROLLER-#50<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |PT0102<br /> |LINK-CONNECTING-#50<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |PT0406<br /> |FLANGE BEARING-4 BOLT-1 3/16&quot;<br /> |<br /> |''Alloy casting''<br /> |2<br /> |-<br /> |7<br /> |HW0503<br /> |BOLT-HHCS-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |PT0107<br /> |SPROCKET-50B15 X 1&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HC0121<br /> |MOTOR-HYDRAULIC-100CC<br /> |<br /> |''SAE 2-Bolt mount''<br /> |1<br /> |-<br /> |11<br /> |H1605<br /> |ADAPTER-90 DEG-#6 JICM X #10 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW1071<br /> |KEY-WOODRUFF-#808 STD<br /> |<br /> |''Supplied with Item 10''<br /> |A/R<br /> |-<br /> |13<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |14<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |15<br /> |43017007<br /> |PLATE-MOUNTING-SCREW DRIVE MOTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |43057019<br /> |PLATE-COVER<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0415<br /> |BOLT-SHCS-3/8-16 X 3/4&quot;<br /> |<br /> |<br /> |8<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> ! colspan=&quot;6&quot; |ITEMS BELOW ARE REQUIRED FOR REPLACING THE LINEAR DRIVE<br /> <br /> SCREW ON UNITS WITH FRAME #'S OF 373 AND EARLIER<br /> |-<br /> ! colspan=&quot;6&quot; |LINEAR DRIVE SCREW UPDATE KIT<br /> |-<br /> |REF<br /> |80252011<br /> |UPGRADE KIT<br /> |<br /> |<br /> |1<br /> |-<br /> |1<br /> |43024001<br /> |SCREW-LINEAR DRIVE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |PT0119<br /> |SPROCKET-50B15 X 1 3/16&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43097004<br /> |KEY-1/4&quot; X 7/8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |PT0406<br /> |FLANGE BEARING-4 BOLT-1 3/16&quot;<br /> |<br /> |''Alloy casting''<br /> |2<br /> |-<br /> |7<br /> |HW0503<br /> |BOLT-HHCS-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |16<br /> |43057019<br /> |PLATE-COVER<br /> |<br /> |<br /> |2<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |43057022<br /> |SHIM-18GA<br /> |<br /> |''May not be required'' - ''(Not shown)''<br /> |2<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |43057018<br /> |TEMPLATE-BEARING MOUNT PATTERN<br /> |<br /> |''(Not shown)''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |43057020<br /> |SPACER PLATE<br /> |<br /> |''(Not shown)''<br /> |2<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |80000015<br /> |INSTRUCTION DETAIL<br /> |<br /> |''(Not shown)''<br /> |REF<br /> |}<br /> <br /> =====''[Discontinued] Drive Screw Assembly (Frame #'s 373 and Earlier)''=====<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Drive Screw (Rotary Actuator) Discontinued.png|alt=Discontinued BE-SL &amp; BE-DS Drive Screw (Rotary Actuator)|frameless|532x532px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Drive_Screw_(Rotary_Actuator)_Discontinued.png]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |SCREW-LINEAR DRIVE (DISCONTINUED)<br /> |<br /> |''See 80252011 Upgrade Kit''<br /> |1<br /> |-<br /> |2<br /> |PT0118<br /> |SPROCKET-50B12 X 1 3/16&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43097004<br /> |KEY-1/4&quot; X 7/8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |00158001-15<br /> |CHAIN-ROLLER-#50<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |PT0102<br /> |LINK-CONNECTING-#50<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43057016<br /> |BLOCK-BEARING RETAINER<br /> |<br /> |<br /> |2<br /> |-<br /> |6a<br /> |PT0414<br /> |RACE-TAPERED ROLLER BEARING<br /> |<br /> |''Included with 43057016''<br /> |2<br /> |-<br /> |7<br /> |PT0623<br /> |SEAL-GREASE<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0416<br /> |BOLT-SHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |PT0415<br /> |BEARING-TAPERED ROLLER<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW1050<br /> |NUT-LOCK<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |43057017<br /> |PLATE-COVER<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0415<br /> |BOLT-SHCS-3/8-16 X 3/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |13<br /> |PT0624<br /> |FITTING-ZERK<br /> |<br /> |<br /> |2<br /> |}<br /> ===&lt;big&gt;&lt;u&gt;Hose Carrier Plate&lt;/u&gt;&lt;/big&gt;===<br /> [[File:BE-TS Hose Carrier Plate.png|alt=BE-TS Hose Carrier Plate|frameless|554x554px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43915018<br /> |PLATE-HOSE CARRIER<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |PT0618<br /> |BRACKET-FIXED END<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |PT0617<br /> |HOSE CARRIER<br /> |<br /> |''20 links required''<br /> |3 FT<br /> |-<br /> |5<br /> |PT0619<br /> |BRACKET-MOVING END<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |9<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |10<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HC0262<br /> |VALVE-CROSS PORT RELIEF<br /> |<br /> |''Includes cartridges''<br /> |1<br /> |-<br /> |12a<br /> |43846002<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''†† For Item 12 (Not shown)''<br /> |2<br /> |-<br /> |13<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |H1560<br /> |ADAPTER-45 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |E1329<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |''PVC - Includes cover''<br /> |1<br /> |-<br /> |19<br /> |HW0212<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |20<br /> |HW0102<br /> |WASHER-FLAT-#10-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |21<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |22<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |23<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |''For Items 21 &amp; 22 (Not shown)''<br /> |3<br /> |-<br /> |24<br /> |HW1076<br /> |BOLT-FHSCS-3/8-16 X 1&quot;<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Units built prior to February 2014 without extended reach option use (4) HW0403 mounting bolts.''<br /> <br /> ''†† Cartridges are for replacement only.''<br /> |}<br /> <br /> === &lt;big&gt;'''&lt;u&gt;Magnet Components ''(Rotary Actuator)''&lt;/u&gt;'''&lt;/big&gt; ===<br /> <br /> ==== '''''&lt;big&gt;[Discontinued] Magnet Arm Configuration&lt;/big&gt;''''' ====<br /> [[File:BE-TS (Discontinued) Magnet Arm Configuration.png|alt=BE-TS (Discontinued) Magnet Arm Configuration|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41257014<br /> |TIE PLATE-SWING ARM<br /> |<br /> |''All units''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |41655008<br /> |EXTENSION-ARM<br /> |<br /> |''BE-36 only (Not shown)''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |43455001<br /> |EXTENSION-ARM<br /> |<br /> |''BE-42 only (Not shown)''<br /> |1<br /> |-<br /> |2<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0113<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0010<br /> |NUT-JAM-5/8-11<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |41655001<br /> |CARRIER TUBE-MAGNET SWING SHAFT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |7<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |9<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |6<br /> |-<br /> |10<br /> |41657006<br /> |SHAFT-MAGNET SWING<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |41698001<br /> |KEY-3/8&quot; X 7/16&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |N/A<br /> |STOP-MAGNET SWING<br /> |<br /> |''† Dicontinued''<br /> |1<br /> |-<br /> |13<br /> |PT0430<br /> |FLANGE BEARING-4 BOLT-1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |HW0513<br /> |BOLT-HHCS-1/2-13 X 2 1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |15<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |16<br /> |-<br /> |16<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |17<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |-<br /> |18<br /> |41655002<br /> |PLATE-MAGNET MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |41257015<br /> |BLOCK-TIGHTENER<br /> |<br /> |''2-piece item''<br /> |1<br /> |-<br /> |20<br /> |41257016<br /> |BLOCK-FIXED<br /> |<br /> |''2-piece item''<br /> |1<br /> |-<br /> |21<br /> |HW0423<br /> |BOLT-SHCS-3/8-16 X 3 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0806<br /> |SET SCREW-3/8-16 X 2&quot;<br /> |<br /> |''Replaces Swivel Head''<br /> |4<br /> |-<br /> |24<br /> |HW0424<br /> |NUT-JAM-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |25<br /> |41657017<br /> |INSULATOR-MAGNET MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |26<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |27<br /> |41657008<br /> |PAD-MAGNET SLIDE<br /> |<br /> |<br /> |2<br /> |-<br /> |28<br /> |HW0314<br /> |BOLT-FHSCS-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Refer to [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#&amp;#x5B;Current&amp;#x5D;_Magnet_Arm_Configuration_(Rotary_Actuator) &lt;nowiki&gt;[Current] Magnet Arm Configuration (Rotary Actuator)&lt;/nowiki&gt;] section for replacement / upgrade parts.''<br /> |}<br /> <br /> ==== &lt;big&gt;''[Current] Magnet Arm Configuration (Rotary Actuator)''&lt;/big&gt; ====<br /> [[File:BE-TS (Current) Magnet Arm Configuration.png|alt=BE-TS (Current) Magnet Arm Configuration|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |80252012<br /> |MAGNET SWING STOP KIT<br /> |<br /> |''Includes Items 1 through 6''<br /> |A/R<br /> |-<br /> |1<br /> |43057029<br /> |PLATE-STOP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43058003<br /> |SLEEVE-STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |43057030<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |PL0501<br /> |GROMMET-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0509<br /> |BOLT-HHCS-1/2-13 X 4 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |44557003<br /> |PLATE-STOP<br /> |<br /> |''† Single compartment units only''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† For units equipped with Pivot Shaft. See [Current] Magnet Arm Configuration (Rotary Actuator) for units with Independent Magnet Pivot Bearings.'' <br /> |}<br /> '''&lt;big&gt;''Magnet Pivot Stop (Rotary Actuator)''&lt;/big&gt;'''<br /> <br /> [[File:BE-TS Magnet Pivot Stop.png|alt=BE-TS Magnet Pivot Stop|frameless|547x547px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |MAGNET PUSH/PULL ARM<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |43055010<br /> |MAGNET MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |PT0470<br /> |BEARING-MAGNET PIVOT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0525<br /> |BOLT-CARRIAGE-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |5<br /> |HW0524<br /> |BOLT-CARRIAGE-1/2-13 X 2&quot;<br /> |<br /> |''†† Stop Plate location''<br /> |4<br /> |-<br /> |6<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |7<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |16<br /> |-<br /> |8<br /> |43058009<br /> |PLATE-ROTATION STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |43058003<br /> |SLEEVE-STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43058010<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |PL0501<br /> |GROMMET-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |43057037<br /> |INSULATOR-BOTTOM<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |16<br /> |41657008<br /> |SLIDE-MAGNET<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0314<br /> |BOLT-FHSCS-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |44558001<br /> |PLATE-ROTATION STOP<br /> |<br /> |''†† Single compartment units only''<br /> |2<br /> |-<br /> |REF<br /> |43052014<br /> |ADJUSTABLE PUSH-PULL ARM<br /> |<br /> |''Includes Items 19-23''<br /> |A/R<br /> |-<br /> |19<br /> |43055018<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |20<br /> |43055019<br /> |MAGNET MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |21<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |22<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† 1-Piece Arm no longer available. Must be replaced with Adjustable Arm.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Single compartment Stop Plates require (1) additional 2&quot; long Carriage Bolt each''<br /> |}<br /> <br /> ==== &lt;big&gt;''Magnet Mounting Hardware (Rotary Actuator)''&lt;/big&gt; ====<br /> [[File:BE-TS Magnet Mounting Hardware (Rotary Actuator).png|alt=BE-TS Magnet Mounting Hardware (Rotary Actuator)|frameless|554x554px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43032009<br /> |MAGNET ASSEMBLY<br /> |<br /> |''Includes Items 1 through 12''<br /> |A/R<br /> |-<br /> |1<br /> |N/A<br /> |ELECTROMAGNET-95VDC<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |E0314<br /> |SENSOR-PROXIMITY-30MM<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |N/A<br /> |GASKET-REAR<br /> |<br /> |''Discontinued - Not used''<br /> |2<br /> |-<br /> |4<br /> |41657002<br /> |COVER-PROXIMITY SENSOR HOUSING<br /> |<br /> |''Rear''<br /> |2<br /> |-<br /> |5<br /> |HW1065<br /> |SCREW-SHCS-#6-32 X 3/8&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |6<br /> |HW1066<br /> |WASHER-LOCK-#6<br /> |<br /> |<br /> |8<br /> |-<br /> |7<br /> |E0376<br /> |INDICATOR LIGHT<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |8<br /> |E0335<br /> |RECEPTACLE-5 PIN MALE<br /> |<br /> |''With 12&quot; lead''<br /> |2<br /> |-<br /> |9<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |N/A<br /> |GASKET-FRONT<br /> |<br /> |''Discontinued - Not used''<br /> |2<br /> |-<br /> |11<br /> |41657003<br /> |COVER-PROXIMITY SENSOR HOUSING<br /> |80252015<br /> |''Front''<br /> |2<br /> |-<br /> |12<br /> |HW0138<br /> |SCREW-FHSCS-#8-32 X 3/8&quot;<br /> |80252015<br /> |<br /> |8<br /> |-<br /> |13<br /> |HW0433<br /> |STUD-1/2-13 X 5&quot;<br /> |80252006<br /> | rowspan=&quot;5&quot; |''For units with Magnet Pivot Shaft only.'' <br /> <br /> ''See [Discontinued] Magnet Arm Configuration for units built prior to 11/01/14''<br /> |8<br /> |-<br /> |14<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |80252006<br /> |8<br /> |-<br /> |15<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |80252006<br /> |40<br /> |-<br /> |16<br /> |HW1002<br /> |SPRING-1/2&quot;<br /> |80252006<br /> |24<br /> |-<br /> |17<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |80252006<br /> |8<br /> |-<br /> |18<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |80252014<br /> | rowspan=&quot;4&quot; |''For units with independent Pivot Bearings only.'' <br /> <br /> ''See [Current] Magnet Arm Configuration for units built 11/01/14 to present)''<br /> |4<br /> |-<br /> |19<br /> |HW1002<br /> |SPRING-1/2&quot;<br /> |80252014<br /> |4<br /> |-<br /> |20<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |80252014<br /> |8<br /> |-<br /> |21<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |80252014<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Extractors built or replacement magnets shipped prior to October 2021 used multi-piece indicator lights with replaceable bulb and lens and are no longer available. Current indicator light is a 1-piece LED assembly. Replacement of any multi-piece component requires replacing entire assembly with current, 1-piece indicator light.''<br /> |}<br /> <br /> === '''''Magnet Cords (Rotary Actuator)''''' ===<br /> [[File:BE-TS Magnet Cords.png|alt=BE-TS Magnet Cords|frameless|555x555px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1105<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |''Weather proof box''<br /> |1<br /> |-<br /> |2<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |E1106<br /> |COVER-JUNCTION BOX<br /> |<br /> |''Weather proof with gasket'' <br /> |1<br /> |-<br /> |4<br /> |E0333<br /> |RECEPTACLE-9 PIN MALE<br /> |<br /> |''With 12&quot; lead''<br /> |1<br /> |-<br /> |5<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |6<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |7<br /> |E0334<br /> |CORD-5 PIN FEMALE<br /> |<br /> |''With 36&quot; lead''<br /> |2<br /> |-<br /> |8<br /> |E0332<br /> |CORD-9 PIN FEMALE-90 DEG<br /> |<br /> |''With 36&quot; lead''<br /> |1<br /> |-<br /> |9<br /> |PL0501<br /> |GROMMET-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |41657013-2<br /> |PLATE-PANEL MOUNTING<br /> |<br /> |''With single cable hole''<br /> |1<br /> |-<br /> |11<br /> |E0334-6<br /> |CORD-5 PIN FEMALE<br /> |<br /> |''With 72&quot; lead''<br /> |2<br /> |-<br /> |12<br /> |43057038-2<br /> |PLATE-PANEL MOUNTING<br /> |<br /> |''With dual cable holes''<br /> |1<br /> |}<br /> '''''&lt;big&gt;Magnet Panel Mounting (Rotary Actuator)&lt;/big&gt;'''''<br /> <br /> [[File:BE-TS Panel Mounting (Rotary Actuator).png|alt=BE-TS Panel Mounting (Rotary Actuator)|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43057021<br /> |PLATE-STIFFENER<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |''Not shown''<br /> |24<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |5<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |12<br /> |-<br /> |6<br /> |41637001<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0325<br /> |BOLT-5/16-18 X 1 3/4&quot;-PAN HEAD<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |N/A<br /> |INSULATOR-THREADED FEMALE<br /> |<br /> |''Discontinued''<br /> |4<br /> |-<br /> |9<br /> |HW0106<br /> |WASHER-FLAT-5/16&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0326<br /> |NUT-NILN-5/16-18<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |E1016<br /> |FUSE HOLDER<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |E0325<br /> |FUSE-7AMP-250VAC<br /> |<br /> |''FLM-7 or FNM-7''<br /> |1<br /> |-<br /> |16<br /> |PL0307<br /> |INSULATOR-MALE STUD<br /> |<br /> |<br /> |4<br /> |}<br /> '''''&lt;big&gt;Magnet Extractor Electrical Panel (Rotary Actuator)&lt;/big&gt;'''''<br /> <br /> [[File:BE-TS Magnet Extractor Electrical Panel (Rotary Actuator).png|alt=BE-TS Magnet Extractor Electrical Panel (Rotary Actuator)|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41637001<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41637002<br /> |WIRE WAY<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |41637003<br /> |WIRE WAY<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |41637004<br /> |TRACK-TERMINAL BLOCK MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |41637005<br /> |TRACK-TERMINAL BLOCK MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |7<br /> |HW0132<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |<br /> |10<br /> |-<br /> |8<br /> |HW0133<br /> |NUT-NILN-#8-32<br /> |<br /> |''Not shown''<br /> |16<br /> |-<br /> |9<br /> |E1020<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |12<br /> |-<br /> |10<br /> |E1040<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |E1330<br /> |END ANCHOR<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |E1009<br /> |RECTIFIER-FULL WAVE BRIDGE<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |HW0135<br /> |SCREW-RHMS-#8-32 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |E1313<br /> |SOCKET-RELAY-8 PIN<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0139<br /> |SCREW-RHMS-#8-32 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |E0331<br /> |RELAY-DPDT-110VAC<br /> |<br /> |''with Indicator Light''<br /> |2<br /> |}<br /> <br /> === &lt;big&gt;'''&lt;u&gt;Swing Arm Stop (Rotary Actuator)&lt;/u&gt;'''&lt;/big&gt; ===<br /> [[File:BE-TS Swing Arm Stop (Rotary Actuator).png|alt=BE-TS Swing Arm Stop (Rotary Actuator)|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055007<br /> |MOUNT-STOP-SWING ARM<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |2<br /> |43057024<br /> |STOP-SWING ARM<br /> |<br /> |''BE-24''<br /> |4<br /> |-<br /> |43057023<br /> |STOP-SWING ARM<br /> |<br /> |''BE-36 &amp; BE-42''<br /> |4<br /> |-<br /> |3<br /> |HW0304<br /> |BOLT-HHCS-1/4-20 X 1 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Vacuum_Swing_Arm_Stop_(Rotary_Actuator) Vacuum Swing Arm Stop (Rotary Actuator)] section for single compartment stop mount and stop.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Extended Reach (Rotary Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Vacuum Extended Reach (Rotary Actuator).png|alt=BE-TS Vacuum Extended Reach (Rotary Actuator)|frameless|536x536px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41257014<br /> |TIE PLATE-SWING ARM<br /> |<br /> |''All units''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |41655008<br /> |EXTENSION-ARM<br /> |<br /> |''BE-36 only (Not shown)''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |43455001<br /> |EXTENSION-ARM<br /> |<br /> |''BE-42 only (Not shown)''<br /> |1<br /> |-<br /> |2<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |P0301-1<br /> |HOSE-COIL-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |41257035<br /> |STANDOFF<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW1072<br /> |RESTRAINT-HOSE<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0318<br /> |BOLT-SHCS-1/4-20 X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |HW0312<br /> |SCREW-SHSS-1/4-20 X 1&quot;-CUP POINT<br /> |<br /> |<br /> |1<br /> |}<br /> [[File:BE-TS Vacuum Extended Reach (Rotary Actuator) 2.png|alt=BE-TS Vacuum Extended Reach (Rotary Actuator)|frameless|547x547px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41255005<br /> |ARM-EXTENSION-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0416<br /> |CYLINDER-EXTENDED REACH-VACUUM<br /> |<br /> |''2 1/2&quot; X 12&quot; Cylinder''<br /> |1<br /> |-<br /> |3<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JICM X #6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |41257031<br /> |PIN-CLEVIS END<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |00197036<br /> |PIN-ROD END<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1058<br /> |PIN-HITCH<br /> |<br /> |<br /> |4<br /> |}<br /> [[File:BE-TS Vacuum Extended Reach (Rotary Actuator) 3.png|alt=BE-TS Vacuum Extended Reach (Rotary Actuator) 3|frameless|541x541px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41255004<br /> |HOUSING-EXTENDED REACH-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41257030<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |41258002<br /> |PLATE-BEARING<br /> |80258001<br /> |''Side''<br /> |2<br /> |-<br /> |8<br /> |41258005<br /> |PLATE-SHIM<br /> |80258001<br /> |''Side''<br /> |2<br /> |-<br /> |9<br /> |41258003<br /> |PLATE-BEARING<br /> |80258001<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |10<br /> |41258004<br /> |PLATE-SHIM<br /> |80258001<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |11<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |28<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |28<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Extended Reach (Rotary Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Extended Reach Rotary Actuator.png|alt=BE-TS Extended Reach Rotary Actuator|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43046001<br /> |ROTARY ACTUATOR<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |80000002<br /> |ROTARY ACTUATOR BASE ASSEMBLY<br /> |<br /> |''Without Actuator''<br /> |1<br /> |-<br /> |2A<br /> |N/A<br /> |VERTICAL CARRIER PLATE-OUTER<br /> |<br /> |''Included with 80000002''<br /> |2<br /> |-<br /> |2B<br /> |N/A<br /> |VERTICAL CARRIER PLATE-INNER<br /> |<br /> |''Included with 80000002''<br /> |1<br /> |-<br /> |2C<br /> |N/A<br /> |CARRIER BASE PLATE<br /> |<br /> |''Included with 80000002''<br /> |1<br /> |-<br /> |3<br /> |HW1070<br /> |PIN-PULL DOWEL-5/8&quot; X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0508<br /> |BOLT-SHCS-1/2-13 X 3/4&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW1045<br /> |PIN-PULL DOWEL-3/8&quot; X 1 1/2&quot;<br /> |<br /> |''Included with 80000002''<br /> |6<br /> |-<br /> |6<br /> |HW0412<br /> |BOLT-SHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |''Included with 80000002''<br /> |12<br /> |-<br /> |7<br /> |H0010<br /> |FITTING-BULKHEAD-3/4-16 X #4 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |4<br /> |}<br /> [[File:BE-TS Extended Reach Rotary Actuator 2.png|alt=BE-TS Extended Reach Rotary Actuator |frameless|535x535px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PT0634<br /> |BRACKET-MALE END<br /> |<br /> |''Sols as a set''<br /> |1<br /> |-<br /> |2<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |10<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |PT0627<br /> |HOSE CARRIER<br /> |<br /> |''14 links required''<br /> |39&quot;<br /> |-<br /> |7<br /> |PT0634<br /> |BRACKET-FEMALE END<br /> |<br /> |''Sols as a set''<br /> |1<br /> |-<br /> |8<br /> |HC0262<br /> |VALVE-CROSS PORT RELIEF<br /> |<br /> |<br /> |1<br /> |-<br /> |8a<br /> |43046003<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''† For Item 8 (Not shown)''<br /> |2<br /> |-<br /> |9<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |H1546<br /> |ADAPTER-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |H1617<br /> |ADAPTER-45 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HC0237<br /> |VALVE-SEQUENCING<br /> |<br /> |<br /> |1<br /> |-<br /> |12a<br /> |43046005<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''† For Item 12 (Not shown)''<br /> |A/R<br /> |-<br /> |13<br /> |HW0317<br /> |BOLT-HHCS-1/4-20 X 3 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |H1560<br /> |ADAPTER-45 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |H1600<br /> |ADAPTER-90 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Cartridges are for replacement only''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Extended Reach (Rotary Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Extended Reach (Rotary Actuator).png|alt=BE-TS Magnet Extended Reach (Rotary Actuator)|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055011<br /> |ARM-EXTENSION-MAGNET<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0415<br /> |CYLINDER-EXTENDED REACH-MAGNET<br /> |<br /> |''2 1/2&quot; X 8&quot; Cylinder''<br /> |1<br /> |-<br /> |3<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JICM X #6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CLEVIS END<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-ROD END<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-EXTERNAL-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW1043<br /> |CLAMP-CYLINDER<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |43057044-2<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |43058019<br /> |SUPPORT-CABLE-BAND CLAMP<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> [[File:BE-TS Magnet Extended Reach (Rotary Actuator) 2.png|alt=BE-TS Magnet Extended Reach (Rotary Actuator) |frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055012<br /> |HOUSING-EXTENDED REACH-MAGNET<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |43058013<br /> |PLATE-BEARING-SIDE<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |43058016<br /> |PLATE-SHIM-SIDE<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |43058014<br /> |PLATE-BEARING-UPPER/LOWER<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43058015<br /> |PLATE-SHIM-UPPER/LOWER<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |24<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |24<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Extended Reach End Plate&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Extended Reach End Plate.png|alt=BE-TS Extended Reach End Plate|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |CARRIER SHAFT-EXTRACTOR ARM<br /> |<br /> |''† 3-Hole version''<br /> |A/R<br /> |-<br /> |2<br /> |PT0413<br /> |COLLAR-SHAFT-3&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |50057009<br /> |PLATE-END-3 HOLE<br /> |<br /> |''Replacement part only''<br /> |4<br /> |-<br /> |4<br /> |50057010<br /> |SHIM-END PLATE<br /> |<br /> |''†† See notes''<br /> |A/R<br /> |-<br /> |5<br /> |HW1076<br /> |BOLT-FHSCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |6<br /> |43057045<br /> |CARRIER SHAFT-EXTRACTOR ARM<br /> |<br /> |''1-Hole version''<br /> |2<br /> |-<br /> |7<br /> |43017076<br /> |PLATE-END-1 HOLE<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† 3-Hole Carrier Shaft no longer available. Must replace 3-Hole shaft with current, 1-Hole version along with new ennd plates &amp; hardware.'' <br /> |-<br /> | colspan=&quot;6&quot; |''†† Shim quantity varies due to manufacturing tolerances.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Carrier Shafts &amp; Bearings&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Carrier Shafts &amp; Bearings (Helical Actuator).png|alt=BE-TS Carrier Shafts &amp; Bearings (Helical Actuator)|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43057045<br /> |CARRIER SHAFT-EXTRACTOR ARM<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |2<br /> |43054007<br /> |BEARING-EXTRACTOR ARM CARRIER<br /> |80252002<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0412<br /> |BOLT-SHCS-3/8-16 X 1 1/4&quot;<br /> |80252002<br /> |<br /> |16<br /> |-<br /> |4<br /> |PT0413<br /> |COLLAR-SHAFT-3&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |50057010<br /> |SHIM-END PLATE<br /> |<br /> |<br /> |A/R<br /> |-<br /> |6<br /> |43017076<br /> |PLATE-END-1 HOLE<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |PT0624<br /> |FITTING-ZERK<br /> |80252002<br /> |''Not shown''<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Extended_Reach_End_Plate Extended Reach End Plate] section for Extended Reach equipped units.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Drive Nut Assembly (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Drive Nut Assembly (Helical Actuator).png|alt=BE-TS Drive Nut Assembly (Helical Actuator)|frameless|600x600px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43054006<br /> |DRIVE NUT ASSEMBLY<br /> |80252003<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0426<br /> |BOLT-SHCS-3/8-16 X 5 1/2&quot;<br /> |80252003<br /> |''† See notes''<br /> |4<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |80252003<br /> |''† See notes''<br /> |4<br /> |-<br /> |4<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |80252003<br /> |''† See notes''<br /> |4<br /> |-<br /> |5<br /> |PT0624<br /> |FITTING-ZERK<br /> |80252003<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† It is recommended to replce mounting hardware when replacing Drive Nut Assembly.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Swing Arms &amp; Actuator (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;[Discontinued] Helical Actuator&lt;/big&gt;''''' ====<br /> [[File:BE-TS Swing Arms &amp; Actuator (Helical Actuator).png|alt=BE-TS [Discontinued] Swing Arms &amp; Actuator (Helical Actuator)|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |HELICAL ACTUATOR<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |43057046<br /> |ACTUATOR BASE PLATE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43058022<br /> |SPACER-ACTUATOR<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0725<br /> |BOLT-HHCS-3/4-16 X 4-3/4&quot;-GR8<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0066<br /> |NUT-JAM-3/4-16-GR8<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43055013<br /> |SWING ARM-LHS<br /> |<br /> | rowspan=&quot;6&quot; |''†† See notes''<br /> |1<br /> |-<br /> |7<br /> |HW0620<br /> |BOLT-HHCS-5/8-11 X 1-1/4&quot;<br /> |<br /> |6<br /> |-<br /> |8<br /> |HW0013<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |6<br /> |-<br /> |9<br /> |43055014<br /> |SWING ARM-RHS<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1-1/4&quot;<br /> |<br /> |6<br /> |-<br /> |11<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |6<br /> |-<br /> |12<br /> |43042008<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |43042010<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE, LONG<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |H1619<br /> |ADAPTER-90 DEG-#6 JICM X #4 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |H0010<br /> |FITTING-H-BULKHEAD-1/4 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |H1504<br /> |ADAPTER-#6 JICM X #4 NPTM<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW1082<br /> |CLAMP-HOSE<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Discontinued Helical Actuator no longer available. Must replace with current Helical Actuator Retro Kit 80252032. See [Current] Helical Actuator.'' <br /> <br /> ''†† Swing arms manufactured prior to January 2022 use 10 bolts &amp; washers per Swing Arm.'' <br /> |}<br /> <br /> ==== '''''&lt;big&gt;[Current] Helical Actuator&lt;/big&gt;''''' ====<br /> [[File:BE-TS (Current) Swing Arms &amp; Actuator (Helical Actuator).png|alt=BE-TS (Current) Swing Arms &amp; Actuator (Helical Actuator)|frameless|544x544px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |N/A<br /> |43052020<br /> |HELICAL ACTUATOR ASSEMBLY<br /> |<br /> |''Includes Items 1 through 17''<br /> |1<br /> |-<br /> |1<br /> |HC0180<br /> |HELICAL ACTUATOR<br /> |80252032<br /> |<br /> |1<br /> |-<br /> |2<br /> |43057046<br /> |ACTUATOR BASE PLATE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43058022<br /> |SPACER-ACTUATOR<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0725<br /> |BOLT-HHCS-3/4-16 X 4-3/4&quot;-GR8<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0066<br /> |NUT-JAM-3/4-16-GR8<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43055013<br /> |SWING ARM-LHS<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0620<br /> |BOLT-HHCS-5/8-11 X 1-1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |8<br /> |HW0013<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |9<br /> |43055014<br /> |SWING ARM-RHS<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1-1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |11<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |12<br /> |43042011<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE, 90 DEG<br /> |80252032<br /> |''† See notes''<br /> |1<br /> |-<br /> |13<br /> |43042012<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE, SHORT<br /> |80252032<br /> |''† See notes''<br /> |1<br /> |-<br /> |14<br /> |H1619<br /> |ADAPTER-90 DEG-#6 JICM X #4 SAEM<br /> |80252032<br /> |<br /> |2<br /> |-<br /> |15<br /> |H0010<br /> |FITTING-H-BULKHEAD-1/4 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |H1504<br /> |ADAPTER-#6 JICM X #4 NPTM<br /> |80252032<br /> |<br /> |1<br /> |-<br /> |17<br /> |H1691<br /> |ADAPTER-45 DEG-#6 JICM X #4 NPTM<br /> |80252032<br /> |''† See notes''<br /> |1<br /> |-<br /> |18<br /> |HW1082<br /> |CLAMP-HOSE<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Hard-Pipes and 45 degree adapter required if replacing discontinued actuator with current Actuator Kit Part # 80252032 required for discontinued actuator replacement.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Swing Arm Stops &amp; Tie Plate&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Swing Arm Stops &amp; Tie Plate (Helical Actuator).png|alt=BE-TS Swing Arm Stops &amp; Tie Plate (Helical Actuator)|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43057050<br /> |TIE PLATE-HELICAL SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0113<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0010<br /> |NUT-JAM-5/8-11<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |43057052<br /> |STOP-POLY-SWING ARM<br /> |<br /> |''† See notes''<br /> |4<br /> |-<br /> |6<br /> |HW0441<br /> |BOLT-FHSCS-3/8-16 X 1-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW0031<br /> |NUT-LOCK-3/8-16, DEFORMED THREAD<br /> |<br /> |''† † See notes''<br /> |4<br /> |-<br /> |8<br /> |44555002<br /> |SWING ARM STOP<br /> |<br /> |''Single compartment use only''<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Replacement Poly Stop design updated from Square to Round. Stop Spacers not required with current, Round-Style Stops.''<br /> |-<br /> | colspan=&quot;6&quot; |''† † Deformed Thread Lock Nut replaces Acorn Nut and Split Lock Washer used previously.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Push/Pull Arm Mounting (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Push-Pull Arm Mounting.png|alt=BE-TS Push-Pull Arm Mounting (Helical Actuator)|frameless|542x542px]]<br /> {| class=&quot;wikitable&quot;<br /> ! rowspan=&quot;2&quot; |ITEM<br /> ! rowspan=&quot;2&quot; |BHS PART NUMBER<br /> ! rowspan=&quot;2&quot; |DESCRIPTION<br /> ! rowspan=&quot;2&quot; |REF. KIT NO.<br /> ! rowspan=&quot;2&quot; |NOTES<br /> ! colspan=&quot;3&quot; |NO. REQ<br /> |-<br /> !BE-24<br /> !BE-36<br /> !BE-42<br /> |-<br /> | rowspan=&quot;2&quot; |1<br /> |41655008<br /> |EXTENSION-ARM<br /> |<br /> |''†BE-36 units only''<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |1<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |43455001<br /> |EXTENSION-ARM<br /> |<br /> |''†BE-42 units only''<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |1<br /> |-<br /> |2<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> | colspan=&quot;2&quot; |12<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |12<br /> | colspan=&quot;2&quot; |24<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> | colspan=&quot;2&quot; |12<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |6<br /> | colspan=&quot;2&quot; |12<br /> |-<br /> ! colspan=&quot;8&quot; |NOTES<br /> |-<br /> | colspan=&quot;8&quot; |''† BE-24 units do not utilize an Arm Extension.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Extractor Arm (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Non-Pivoting Vacuum Cup Arm (Helical Actuator)&lt;/big&gt;''''' ====<br /> [[File:BE-TS Non-Pivoting Vacuum Cup Arm (Helical Actuator).png|alt=BE-TS Non-Pivoting Vacuum Cup Arm (Helical Actuator)|frameless|578x578px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0428<br /> |STUD-VACUUM-3/8-16 X 5&quot;<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |2<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |HW-KIT-2<br /> |<br /> |40<br /> |-<br /> |3<br /> |HW1001<br /> |SPRING-3/8&quot;<br /> |HW-KIT-2<br /> |<br /> |24<br /> |-<br /> |4<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0424<br /> |NUT-JAM-3/8-16<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |6<br /> |P0402<br /> |HOSE BARB-1/4&quot; X #4 MNPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |REF<br /> |43052014<br /> |ADJUSTABLE PUSH-PULL ARM<br /> |<br /> |''Includes Items 7 through 11''<br /> |A/R<br /> |-<br /> |7<br /> |43055018<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |43055019<br /> |VACUUM CUP MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Pivoting Vacuum Cup Arm (Helical Actuator)&lt;/big&gt;''''' ====<br /> [[File:BE-TS Pivoting Vacuum Cup Arm (Helical Actuator).png|alt=BE-TS Pivoting Vacuum Cup Arm (Helical Actuator)|frameless|525x525px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43052014<br /> |ADJUSTABLE PUSH-PULL ARM<br /> |<br /> |''Includes Items 1 through 5''<br /> |A/R<br /> |-<br /> |1<br /> |43055018<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43055019<br /> |VACUUM CUP MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |43055020<br /> |MOUNT-PIVOT-VACUUM CUP<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |PT0470<br /> |BEARING-PIVOT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0525<br /> |BOLT-CARRIAGE-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |9<br /> |HW0524<br /> |BOLT-CARRIAGE-1/2-13 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |11<br /> |HW0008<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |16<br /> |-<br /> |12<br /> |43058009<br /> |PLATE-ROTATION STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |43058003<br /> |SLEEVE-STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |43058010<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |4<br /> |-<br /> |16<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |43037002-2<br /> |SUPPORT-CABLE RESTRAINT<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |21<br /> |P0506<br /> |ELBOW-STR-90 DEG-#4 NPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |22<br /> |P0402<br /> |HOSE BARB-1/4&quot; X #4 MNPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |23<br /> |43057056-2<br /> |BRACKET-HOSE SUPPORT<br /> |<br /> |<br /> |2<br /> |-<br /> |24<br /> |PL0507<br /> |GROMMET-5/8&quot; I.D.<br /> |<br /> |<br /> |2<br /> |-<br /> |25<br /> |P0302<br /> |HOSE-VACUUM-1/4&quot; I.D.<br /> |<br /> |''2 pieces at 48&quot; each''<br /> |96&quot;<br /> |-<br /> |26<br /> |HW0443<br /> |BOLT-HHCS-3/8-16 X 3-1/2&quot;<br /> |HW-KIT-3<br /> |<br /> |8<br /> |-<br /> |27<br /> |HW1001<br /> |SPRING-3/8&quot;<br /> |HW-KIT-3<br /> |<br /> |16<br /> |-<br /> |28<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |HW-KIT-3<br /> |<br /> |32<br /> |-<br /> |29<br /> |HW0424<br /> |NUT-JAM-3/8-16<br /> |HW-KIT-3<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Cup Rotation Stop (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Vacuum Cup Rotation Stop (Helical Actuator).png|alt=BE-TS Vacuum Cup Rotation Stop (Helical Actuator)|frameless|583x583px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |445558001<br /> |PLATE-ROTATION STOP<br /> |<br /> |''† Single compartment units only''<br /> |2<br /> |-<br /> |2<br /> |HW0525<br /> |BOLT-CARRIAGE-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0524<br /> |BOLT-CARRIAGE-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0008<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Components (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Vacuum Components (Helical Actuator).png|alt=BE-TS Vacuum Components (Helical Actuator)|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43058021<br /> |STIFFENER PLATE-HELICAL SWING ARM<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |24<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |5<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |12<br /> |-<br /> |6<br /> |P0005<br /> |PUMP-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |P0207<br /> |VALVE-VACUUM RELEASE<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |P0208<br /> |FILTER-HI FLOW<br /> |<br /> |<br /> |3<br /> |-<br /> |9<br /> |H0011<br /> |NIPPLE-#4 X 2&quot;-BRASS<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |P0502<br /> |TEE-#4 FNPT-BRASS<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |P0506<br /> |ELBOW-STR-90 DEG-#4 NPT-BRASS<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |P0503<br /> |NIPPLE-#4 NPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |P0402<br /> |HOSE BARB-1/4&quot; X #4 MNPT-BRASS<br /> |<br /> |<br /> |6<br /> |-<br /> |14<br /> |P0111<br /> |FILTER-VACUUM-IN-LINE<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0206<br /> |SCREW-RHMS-#10-32 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |43037014-2<br /> |BRACKET-CABLE RESTRAINT<br /> |<br /> |<br /> |1<br /> |-<br /> |17<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |18<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |21<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |22<br /> |E0624<br /> |CONNECTOR-1/2&quot;<br /> |<br /> |''Includes Lock Nut''<br /> |1<br /> |-<br /> |23<br /> |HW0212<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Arm (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Arm (Helical Actuator).png|alt=BE-TS Magnet Arm (Helical Actuator)|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43052014<br /> |ADJUSTABLE PUSH-PULL ARM<br /> |<br /> |''Includes Items 1 through 5''<br /> |A/R<br /> |-<br /> |1<br /> |43055018<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43055019<br /> |VACUUM CUP MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |43055016<br /> |MOUNT-PIVOT-MAGNET<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |PT0470<br /> |BEARING-PIVOT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0525<br /> |BOLT-CARRIAGE-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |9<br /> |HW0524<br /> |BOLT-CARRIAGE-1/2-13 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |11<br /> |HW0008<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |16<br /> |-<br /> |12<br /> |43058009<br /> |PLATE-ROTATION STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |43058003<br /> |SLEEVE-STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |43058010<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |18<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |43037002-2<br /> |SUPPORT-CABLE RESTRAINT<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |21<br /> |E0334-6'<br /> |CORD-5 PIN FEMALE<br /> |<br /> |''With 72&quot; lead''<br /> |2<br /> |-<br /> |22<br /> |E1041<br /> |WIRE LOOM-SPIRAL-3/8&quot;<br /> |<br /> |''2 pieces at 24&quot; each''<br /> |48&quot;<br /> |-<br /> |23<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |2<br /> |-<br /> |24<br /> |43057037<br /> |INSULATOR-BOTTOM<br /> |<br /> |<br /> |2<br /> |-<br /> |25<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |26<br /> |41657008<br /> |SLIDE-MAGNET<br /> |<br /> |<br /> |2<br /> |-<br /> |27<br /> |HW0314<br /> |BOLT-FHSCS-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Assembly (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Assembly (Helical Actuator).png|alt=BE-TS Magnet Assembly (Helical Actuator)|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43032009<br /> |MAGNET ASSEMBLY<br /> |<br /> |''Includes Items 1 through 12''<br /> |A/R<br /> |-<br /> |1<br /> |N/A<br /> |ELECTROMAGNET-95VDC<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |E0314<br /> |SENSOR-PROXIMITY-30MM<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |41657002<br /> |COVER-PROXIMITY SENSOR HOUSING<br /> |<br /> |''Rear''<br /> |2<br /> |-<br /> |4<br /> |HW1065<br /> |SCREW-SHCS-#6-32 X 3/8&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW1066<br /> |WASHER-LOCK-#6<br /> |<br /> |<br /> |8<br /> |-<br /> |6<br /> |E0335<br /> |RECEPTACLE-5 PIN MALE<br /> |<br /> |''With 12&quot; lead''<br /> |2<br /> |-<br /> |7<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |E0376<br /> |INDICATOR LIGHT<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |9<br /> |41657003<br /> |COVER-PROXIMITY SENSOR HOUSING<br /> |80252015<br /> |''Front''<br /> |2<br /> |-<br /> |10<br /> |HW0138<br /> |SCREW-FHSCS-#8-32 X 3/8&quot;<br /> |80252015<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |80252014<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW1002<br /> |SPRING-1/2&quot;<br /> |80252014<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |80252014<br /> |<br /> |8<br /> |-<br /> |14<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |80252014<br /> |<br /> |4<br /> |-<br /> |15<br /> |E0336<br /> |METAL OXIDE VARISTOR<br /> |<br /> |''Not shown''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Extractors built or replacement magnets shipped prior to October 2021 used Multi-Piece Indicator Lights with replaceable bulb and lens and are no longer available. Current Indicator Light is a 1-Piece LED assembly. Replacement of any Multi-Piece component requires replacing entire assembly with current, 1-Piece Indicator Light.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Components (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Components (Helical Actuator).png|alt=BE-TS Magnet Components (Helical Actuator)|frameless|534x534px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43058021<br /> |STIFFENER PLATE-HELICAL SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43057051-2<br /> |STIFFENER-MAGNET-HELICAL SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |4<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |24<br /> |-<br /> |5<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |6<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |12<br /> |-<br /> |7<br /> |PL0307<br /> |INSULATOR-MALE STUD<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0106<br /> |WASHER-FLAT-5/16&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |HW0105<br /> |WASHER-LOCK-5/16&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0004<br /> |NUT-HEX-5/16-18<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |12<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |13<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |14<br /> |E1016<br /> |FUSE HOLDER<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |E0325<br /> |FUSE-7 AMP-250VAC<br /> |<br /> |''FLM-7 or FNM-7''<br /> |1<br /> |-<br /> |16<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |17<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Panel (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Panel (Helical Actuator).png|alt=BE-TS Magnet Panel (Helical Actuator)|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41637001<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41637002<br /> |WIRE WAY-SHORT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |41637003<br /> |WIRE WAY-LONG<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |41637004<br /> |TRACK-MOUNTING-SHORT<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |41637005<br /> |TRACK-MOUNTING-LONG<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> | rowspan=&quot;3&quot; |''Mounting track hardware (Not shown)''<br /> |10<br /> |-<br /> |7<br /> |HW0132<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |10<br /> |-<br /> |8<br /> |HW0133<br /> |NUT-NILN-#8-32<br /> |<br /> |16<br /> |-<br /> |9<br /> |E1020<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |12<br /> |-<br /> |10<br /> |E1040<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |E1330<br /> |END ANCHOR<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |E1009<br /> |RECTIFIER-FULL WAVE BRIDGE<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |HW0135<br /> |SCREW-RHMS-#8-32 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |E1313<br /> |SOCKET-RELAY-8 PIN<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |E0331<br /> |RELAY-DPDT-110VAC<br /> |<br /> |''With Indicator Light''<br /> |2<br /> |-<br /> |16<br /> |HW0139<br /> |SCREW-RHMS-#8-32 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Extended Reach Hydraulics (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== &lt;big&gt;''[Discontinued] Helical Actuator''&lt;/big&gt; ====<br /> [[File:BE-TS (Discontinued) Helical Actuator.png|alt=BE-TS (Discontinued) Helical Actuator|frameless|546x546px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43042009<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |H0010<br /> |FITTING-BULKHEAD-3/4-16 X #4 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |43055017<br /> |ELBOW-BULKHEAD<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> | rowspan=&quot;3&quot; |7<br /> |4-48-0402-0402<br /> |HYD HOSE-1/4&quot; X 48&quot; (BE-24 UNITS)<br /> |<br /> | rowspan=&quot;3&quot; |''Cylinder rod-end hose''<br /> | rowspan=&quot;3&quot; |1<br /> |-<br /> |4-54-0402-0402<br /> |HYD HOSE-1/4&quot; X 54&quot; (BE-36 UNITS)<br /> |<br /> |-<br /> |4-56-0402-0402<br /> |HYD HOSE-1/4&quot; X 56&quot; (BE-42 UNITS)<br /> |<br /> |-<br /> | rowspan=&quot;3&quot; |8<br /> |4-38-0402-0402<br /> |HYD HOSE-1/4&quot; X 38&quot; (BE-24 UNITS)<br /> |<br /> | rowspan=&quot;3&quot; |''Cylinder rod-end hose''<br /> | rowspan=&quot;3&quot; |1<br /> |-<br /> |4-44-0402-0402<br /> |HYD HOSE-1/4&quot; X 44&quot; (BE-36 UNITS)<br /> |<br /> |-<br /> |4-46-0402-0402<br /> |HYD HOSE-1/4&quot; X 46&quot; (BE-42 UNITS)<br /> |<br /> |-<br /> |9<br /> |41257035<br /> |STANDOFF-HOSE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW1093<br /> |CLAMP-CABLE-3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0311<br /> |BOLT-FHSCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> ==== &lt;big&gt;''[Current] Helical Actuator''&lt;/big&gt; ====<br /> [[File:BE-TS (Current) Helical Actuator.png|alt=BE-TS (Current) Helical Actuator|frameless|567x567px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43042013<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |H0010<br /> |FITTING-BULKHEAD-3/4-16 X #4 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |43055021<br /> |ELBOW-BULKHEAD<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> | rowspan=&quot;3&quot; |7<br /> |4-48-0402-0402<br /> |HYD HOSE-1/4&quot; X 48&quot; (BE-24 UNITS)<br /> |<br /> | rowspan=&quot;3&quot; |''Cylinder rod-end hose''<br /> | rowspan=&quot;3&quot; |1<br /> |-<br /> |4-54-0402-0402<br /> |HYD HOSE-1/4&quot; X 54&quot; (BE-36 UNITS)<br /> |<br /> |-<br /> |4-56-0402-0402<br /> |HYD HOSE-1/4&quot; X 56&quot; (BE-42 UNITS)<br /> |<br /> |-<br /> | rowspan=&quot;3&quot; |8<br /> |4-38-0402-0402<br /> |HYD HOSE-1/4&quot; X 38&quot; (BE-24 UNITS)<br /> |<br /> | rowspan=&quot;3&quot; |''Cylinder rod-end hose''<br /> | rowspan=&quot;3&quot; |1<br /> |-<br /> |4-44-0402-0402<br /> |HYD HOSE-1/4&quot; X 44&quot; (BE-36 UNITS)<br /> |<br /> |-<br /> |4-46-0402-0402<br /> |HYD HOSE-1/4&quot; X 46&quot; (BE-42 UNITS)<br /> |<br /> |-<br /> |9<br /> |41257035<br /> |STANDOFF-HOSE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW1093<br /> |CLAMP-CABLE-3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0311<br /> |BOLT-FHSCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Extended Reach (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== &lt;big&gt;'''''Non-Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator)'''''&lt;/big&gt; ====<br /> [[File:BE-TS Non-Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator).png|alt=BE-TS Non-Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator)|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41255005<br /> |ARM-EXTENSION<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41255004<br /> |HOUSING-EXTENDED REACH<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0416<br /> |CYLINDER-2 1/2&quot; X 12&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CYLINDER-REAR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-CYLINDER-ROD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JIC X # 6 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |28<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |28<br /> |-<br /> |15<br /> |41258002<br /> |PLATE-BEARING<br /> |80258001<br /> |''Side''<br /> |2<br /> |-<br /> |16<br /> |41258005<br /> |PLATE-SHIM<br /> |80258001<br /> |''Side''<br /> |2<br /> |-<br /> |17<br /> |41258003<br /> |PLATE-BEARING<br /> |80258001<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |18<br /> |41258004<br /> |PLATE-SHIM<br /> |80258001<br /> |''Upper / lower''<br /> |2<br /> |}<br /> &lt;big&gt;'''''Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator)'''''&lt;/big&gt;<br /> <br /> [[File:BE-TS Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator).png|alt=BE-TS Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator)|frameless|553x553px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055011<br /> |ARM-EXTENSION<br /> |<br /> |''Pivoting cup only''<br /> |1<br /> |-<br /> |2<br /> |43055012<br /> |HOUSING-EXTENDED REACH<br /> |<br /> |''Pivoting cup only''<br /> |1<br /> |-<br /> |3<br /> |HC0415<br /> |CYLINDER-2 1/2&quot; X 8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CYLINDER-REAR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-CYLINDER-ROD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JIC X # 6 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |24<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |24<br /> |-<br /> |15<br /> |43058013<br /> |PLATE-BEARING<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |16<br /> |43058016<br /> |PLATE-SHIM<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |17<br /> |43058014<br /> |PLATE-BEARING<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |18<br /> |43058015<br /> |PLATE-SHIM<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |19<br /> |HW1043<br /> |CLAMP-CYLINDER<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |43058019<br /> |SUPPORT-CABLE-BAND CLAMP<br /> |<br /> |<br /> |2<br /> |-<br /> |21<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |22<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |23<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |24<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Extended Reach (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== &lt;big&gt;'''''[Discontinued] Extended Reach Magnet Arm (Helical Actuator)'''''&lt;/big&gt; ====<br /> [[File:BE-TS (Discontinued) Extended Reach Magnet Arm (Helical Actuator).png|alt=BE-TS (Discontinued) Extended Reach Magnet Arm (Helical Actuator)|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055011<br /> |ARM-EXTENSION<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43055012<br /> |HOUSING-EXTENDED REACH<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0415<br /> |CYLINDER-2 1/2&quot; X 8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CYLINDER-REAR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-CYLINDER-ROD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JIC X # 6 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |24<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |24<br /> |-<br /> |15<br /> |43058013<br /> |PLATE-BEARING<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |16<br /> |43058016<br /> |PLATE-SHIM<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |17<br /> |43058014<br /> |PLATE-BEARING<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |18<br /> |43058015<br /> |PLATE-SHIM<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |19<br /> |HW1043<br /> |CLAMP-CYLINDER<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |43058019<br /> |SUPPORT-CABLE-BAND CLAMP<br /> |<br /> |<br /> |2<br /> |-<br /> |21<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |24<br /> |43057004-2<br /> |SUPPORT-CABLE-MAGNET<br /> |<br /> |<br /> |2<br /> |}<br /> &lt;big&gt;'''''[Current] Extended Reach Magnet Arm (Helical Actuator)'''''&lt;/big&gt;<br /> <br /> [[File:BE-TS (Current) Extended Reach Magnet Arm (Helical Actuator).png|alt=BE-TS (Current) Extended Reach Magnet Arm (Helical Actuator)|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |50055004<br /> |ARM-EXTENSION<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |50055005<br /> |HOUSING-EXTENDED REACH<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0415<br /> |CYLINDER-2 1/2&quot; X 8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CYLINDER-REAR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-CYLINDER-ROD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JIC X # 6 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |20<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |20<br /> |-<br /> |15<br /> |50058009<br /> |PLATE-BEARING<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |16<br /> |50058012<br /> |PLATE-SHIM<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |17<br /> |50058010<br /> |PLATE-BEARING<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |18<br /> |50058011<br /> |PLATE-SHIM<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |19<br /> |HW1043<br /> |CLAMP-CYLINDER<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |43058019<br /> |SUPPORT-CABLE-BAND CLAMP<br /> |<br /> |<br /> |2<br /> |-<br /> |21<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |24<br /> |43057004-2<br /> |SUPPORT-CABLE-MAGNET<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> == &lt;big&gt;Drive and Idler Wheels&lt;/big&gt; ==<br /> <br /> === &lt;big&gt;&lt;u&gt;Drive Wheel Mounting&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Drive Wheel Mounting.png|alt=BE-TS Drive Wheel Mounting|frameless|519x519px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0503<br /> |BOLT-HHCS-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |2<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |''Cylinder Bracket bolt only''<br /> |2<br /> |-<br /> |3<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> === &lt;big&gt;&lt;u&gt;Drive Wheel Motors&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Drive Wheel Motors.png|alt=BE-TS Drive Wheel Motors|frameless|535x535px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;2&quot; |1<br /> |43822001-6B<br /> |FLOOR DRIVE ASSEMBLY (W/ 200CC MOTOR)<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |43822004-6B<br /> |FLOOR DRIVE ASSEMBLY (W/ 400CC MOTOR)<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |2<br /> |43827004<br /> |PLATE-MOTOR MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0416<br /> |BOLT-SHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |H1612<br /> |ADAPTER-90 DEG-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |N/A<br /> |ROD-THREADED-1/2-13 X 7 3/4&quot;<br /> |<br /> |''†† See notes''<br /> |8<br /> |-<br /> |7<br /> |N/A<br /> |SPACER-DRIVE WHEEL-4.75&quot; LG<br /> |<br /> |''†† See notes''<br /> |8<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |43827006<br /> |SPACER-DRIVE WHEEL-4.125&quot; LG<br /> |<br /> |Must be ordered as a set of 4<br /> |8<br /> |-<br /> |11<br /> |HW0516<br /> |BOLT-HHCS-1/2-13 X 6 1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |12<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> | rowspan=&quot;2&quot; |13<br /> |N/A<br /> |MOTOR-HYDRAULIC-200CC<br /> |<br /> |''††† Keyed Shaft''<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |N/A<br /> |MOTOR-HYDRAULIC-400CC<br /> |<br /> |''††† Keyed Shaft''<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |14<br /> |HW1071<br /> |KEY-WOODRUFF-#808 STD<br /> |<br /> |<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |15<br /> |HC0124-6B<br /> |MOTOR-HYDRAULIC-200CC<br /> |<br /> |''† Spline Shaft''<br /> |2<br /> |-<br /> |HC0126-6B<br /> |MOTOR-HYDRAULIC-400CC<br /> |80322003<br /> |''† Spline Shaft''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† 200CC Motors required for units equipped with Parallel Drive Circuit.''<br /> ''400CC Motors required for units equipped with Series Drive Circuit.''<br /> <br /> ''See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Cross_Port_Relief Cross Port Relief] section to determine if unit is Parallel or Series equipped and approximate effectivity of each type.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Parts obsolete and no longer available. Must replace with Items 10 &amp; 11.''<br /> |-<br /> | colspan=&quot;6&quot; |''††† Parts obsolete and no longer available. Must replace with Spline Drive Conversion Kit.''<br /> |}<br /> <br /> === &lt;big&gt;&lt;u&gt;Drive Wheel Bearings&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Drive Wheel Bearings.png|alt=BE-TS Drive Wheel Bearings|frameless|537x537px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43825001<br /> |FRAME-FLOOR DRIVE<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |C0510-1<br /> |WHEEL-10&quot; X 5&quot;-POLY<br /> |80322001<br /> |<br /> |2<br /> |-<br /> |3<br /> |43822003<br /> |SHAFT-WHEEL (W/ COUPLING BODY)<br /> |<br /> |''Available in multiple kits''<br /> |2<br /> |-<br /> |4<br /> |43897004<br /> |KEY-3/8&quot; X 4 3/4&quot;<br /> |80322001<br /> |<br /> |2<br /> |-<br /> |5<br /> |PT0430<br /> |FLANGE BEARING-4 BOLT-1 1/2&quot;<br /> |80322001<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |7<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |16<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |9<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |16<br /> |-<br /> |10<br /> |PT0321<br /> |CHAIN-COUPLING-#50<br /> |<br /> |''Includes connecting pin''<br /> |2<br /> |-<br /> |11<br /> |N/A<br /> |COUPLING BODY-TAPER BORE-#50<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |12<br /> |N/A<br /> |BUSHING-TAPER LOCK-1&quot;<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |13<br /> |HW0323<br /> |BOLT-HHCS-5/16-18 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |14<br /> |PT0330<br /> |COUPLING BODY-#50-SPLINE BORE<br /> |80322003<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW1110<br /> |RETAINING RING-1 1/2&quot;-HEAVY DUTY<br /> |<br /> |''†† Available in multiple kits''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Parts obsolete and no longer available. Spline Drive Conversion Kit required. Reuse of bushing after disassembly not recommended.'' <br /> |-<br /> | colspan=&quot;6&quot; |''† † Retaining Rings used on units shipped after 7/01/12. Units shipped from 7/01/13 are equipped with (2) Retaining Rings per shaft - (1) on each side of the wheel. Units shipped after 11/01/13 are equipped with only (1) Snap Rings as shown. Second Snap Ring is no longer used or required.''<br /> |-<br /> | colspan=&quot;6&quot; |''NOTE: Effectivity dates refer to dates new extractor units are shipped from the factory. Replacement part effectivity &lt;u&gt;'''may'''&lt;/u&gt; differ due to factory inventory levels at time of parts order. Consult factory if unsure of parts needed.''<br /> |}<br /> <br /> === &lt;big&gt;&lt;u&gt;Drive Wheel Assembly&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Drive Wheel Assembly.png|alt=BE-TS Drive Wheel Assembly|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43822005<br /> |RADIAL PISTON DRIVE WHEEL ASSEMBLY<br /> |<br /> |''Includes Items 1 through 6''<br /> |2<br /> |-<br /> |1<br /> |43825003<br /> |RADIAL PISTON DRIVE WHEEL MOUNT<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0160-1<br /> |400CC RADIAL PISTON MOTOR<br /> |<br /> |''Includes nuts &amp; studs''<br /> |1<br /> |-<br /> |REF<br /> |HC0160-STUD<br /> |STUD-M14-1.5 X 46MM<br /> |<br /> |''Replacement motor stud''<br /> |A/R<br /> |-<br /> |REF<br /> |HC0160-NUT<br /> |NUT-FLANGED HEX-M14-1.5<br /> |<br /> |''Replacement motor nut''<br /> |A/R<br /> |-<br /> |3<br /> |C0511<br /> |WHEEL-POLY-10 X 5&quot;-FLANGE MOUNT<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |5<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |6<br /> |-<br /> |7<br /> |H1612<br /> |ADAPTER-H-90 DEG-#10 SAEM X #8 JICM<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |H1539<br /> |ADAPTER-#8 JIC X #6 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1586<br /> |ADAPTER-90 DEG-#8 JICSW X #6 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |H0801<br /> |TEE-H-#6 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H1501<br /> |ADAPTER-#8 JIC X #6 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |H0200<br /> |REDUCER-#6 NPT X #4 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |H0206<br /> |PLUG-#4 NPT<br /> |<br /> |''† Left Drive Wheel only''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Plug used on Left Drive Wheel Assembly only. Hose from Left Drive Wheel Assembly is connected to tee on Right Drive Wheel Assembly.'' <br /> |}<br /> <br /> === &lt;big&gt;&lt;u&gt;Idler Casters&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Idler Casters.png|alt=BE-TS Idler Casters|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |C0500-1<br /> |CASTER-RIGID-10&quot; X 5&quot;-POLY<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |3<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |<br /> |''For Cylinder Bracket position'' <br /> |2<br /> |-<br /> |4<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |16<br /> |-<br /> |5<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |6<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> == &lt;big&gt;Electrical&lt;/big&gt; ==<br /> <br /> === &lt;u&gt;&lt;big&gt;AC Power Stanchion&lt;/big&gt;&lt;/u&gt; ===<br /> <br /> ==== &lt;big&gt;''Aero-Motive Energy Rail''&lt;/big&gt; ====<br /> [[File:BE-TS Aero-Motive Energy Rail.png|alt=BE-TS Aero-Motive Energy Rail|frameless|536x536px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43835001<br /> |STANCHION-POWER<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0511<br /> |BOLT-HHCS-1/2-13 X 3 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |46837014-2<br /> |TOW ARM-COLLECTOR TROLLEY<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |46838015<br /> |SPACER BLOCK-TOW ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW1030<br /> |U-BOLT-3/8-16 X 2&quot; X 5&quot;-SQUARE BEND<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .625&quot; to .750&quot;''<br /> |1<br /> |-<br /> |13<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |HW1051<br /> |EYE BOLT-3/8-16 X 5 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0126<br /> |WASHER-FLAT-3/8&quot;-FENDER<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |BD0010<br /> |TROLLEY-ENERGY RAIL<br /> |<br /> | rowspan=&quot;2&quot; |''Aero-Motive Rail only''<br /> <br /> ''(orange housing color)''<br /> |1<br /> |-<br /> |19<br /> |BD0100<br /> |BRUSH-TROLLEY<br /> |<br /> |4<br /> |}<br /> <br /> ==== '''&lt;big&gt;''Vahle Energy Rail''&lt;/big&gt;''' ====<br /> [[File:BE-TS Vahle Energy Rail.png|alt=BE-TS Vahle Energy Rail|frameless|535x535px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1A<br /> |BD0031<br /> |TROLLEY-ENERGY RAIL, KSL<br /> |<br /> | rowspan=&quot;3&quot; |''† Vahle KSL Rail only''<br /> <br /> ''(green housing color)''<br /> |1<br /> |-<br /> |2A<br /> |BD0040<br /> |BRUSH-PHASE, KSL<br /> |<br /> |3<br /> |-<br /> |3A<br /> |BD0041<br /> |BRUSH-GROUND, KSL<br /> |<br /> |1<br /> |-<br /> |1B<br /> |BD0231<br /> |TROLLEY-ENERGY RAIL, KBH<br /> |<br /> | rowspan=&quot;3&quot; |''† Vahle KBH Rail only''<br /> <br /> ''(gray housing color)''<br /> <br /> ''(Nots shown)''<br /> |1<br /> |-<br /> |2B<br /> |BD0240<br /> |BRUSH-PHASE, KBH<br /> |<br /> |3<br /> |-<br /> |3B<br /> |BD0241<br /> |BRUSH-GROUND, KBH<br /> |<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |4<br /> |BD0030<br /> |TOW ARM-COLLECTOR TROLLEY, KSL<br /> |<br /> |''† Vahle KSL Rail only''<br /> <br /> ''(green housing color)''<br /> |1<br /> |-<br /> |BD0230<br /> |TOW ARM-COLLECTOR TROLLEY, KBH<br /> |<br /> |''† Vahle KBH Rail only''<br /> <br /> ''(gray housing color)''<br /> |1<br /> |-<br /> |5<br /> |46838015<br /> |SPACER-BLOCK-TOW ARM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |6<br /> |41237083-2<br /> |BRACKET-TOW ARM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |7<br /> |HW1054<br /> |U-BOLT-5/16-18 X 2&quot; X 5&quot;-SQUARE BEND<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW0323<br /> |BOLT-HHCS-5/16-18 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0106<br /> |WASHER-FLAT-5/16&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0150<br /> |WASHER-FLAT-5/16&quot;-FENDER<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0105<br /> |WASHER-LOCK-5/16&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0004<br /> |NUT-HEX-5/16-18<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Verify Energy Rail type (KSL OR KBH) by the color of the energy rail housing.'' <br /> |-<br /> | colspan=&quot;6&quot; |''†† Not all units equipped with Tow Arm Bracket. Location of Spacer Block and/or Tow Arm Bracket may vary from configuration shown.'' <br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Control Panel&lt;/big&gt;&lt;/u&gt;''' ===<br /> '''&lt;big&gt;''[Discontinued] Control Panel for Units with 10 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS (Discontinued) Control Panel for Units with 10HP.png|alt=BE-TS (Discontinued) Control Panel for Units with 10HP|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-CONTROL PANEL-16&quot; X 14&quot; X 6&quot;<br /> |<br /> |CONSULT FACTORY<br /> |1<br /> |-<br /> |2<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |Grip size .250&quot; to.375&quot;<br /> |1<br /> |-<br /> |6<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |Grip size .625&quot; to .750&quot;<br /> |2<br /> |-<br /> |7<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |Grip size .500&quot; to .625&quot;<br /> |2<br /> |-<br /> |8<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |''Not shown''<br /> |1<br /> |-<br /> |9<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |''Not shown''<br /> |4<br /> |}<br /> [[File:BE-TS (Discontinued) Control Panel for Units with 10HP Detail.png|alt=BE-TS (Discontinued) Control Panel for Units with 10HP Detail|frameless|556x556px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0640<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |BLANK PANEL WITHOUT HOLES<br /> |1<br /> |-<br /> |2<br /> |E0120<br /> |MAGNETIC STARTER-NEMA 1 3/4&quot;<br /> |<br /> |WITH OVERLOAD<br /> |1<br /> |-<br /> |3<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |<br /> |17<br /> |-<br /> |4<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |<br /> |17<br /> |-<br /> |5<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |17<br /> |-<br /> |6<br /> |E0207-1<br /> |TRANSFORMER<br /> |<br /> |480VAC TO 120VAC, 0.75 Kva<br /> |1<br /> |-<br /> |7<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |HW0003<br /> |NUT-NILN-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |E1023<br /> |WIREWAY<br /> |<br /> |SOLD BY LENGTH<br /> |A/R<br /> |-<br /> |11<br /> |E1024<br /> |MOUNTING TRACK<br /> |<br /> |SOLD BY LENGTH<br /> |A/R<br /> |-<br /> |12<br /> |E1020<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |16<br /> |-<br /> |13<br /> |E1040<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |E1330<br /> |END ANCHOR<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |E0341<br /> |GROUND LUG<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |E0902<br /> |FUSE-6A<br /> |<br /> |FLM-6<br /> |1<br /> |}<br /> <br /> ==== '''&lt;big&gt;''[Current] Control Panel for Units with 20 HP Power Unit''&lt;/big&gt;''' ====<br /> [[File:BE-TS (Current) Control Panel for Units with 20HP.png|alt=BE-TS (Current) Control Panel for Units with 20HP|frameless|601x601px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-24&quot; X 16&quot; X 6&quot;<br /> |<br /> |CONSULT FACTORY<br /> |1<br /> |-<br /> |2<br /> |E0123-1<br /> |HANDLE-DISCONNECT<br /> |<br /> |INCL. MOUNTING SCREWS<br /> |1<br /> |-<br /> |3<br /> |E0662<br /> |RESTRAINT-3/4&quot;-LIQUID TIGHT<br /> |<br /> |INCL. LOCKNUT<br /> |1<br /> |-<br /> |4<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |GRIP SIZE .500&quot; TO .625&quot;<br /> |2<br /> |-<br /> |5<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |GRIP SIZE .625&quot; TO .750&quot;<br /> |1<br /> |-<br /> |6<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |7<br /> |E0661<br /> |RESTRAINT-3/4&quot;-90 DEG-LIQUID TIGHT<br /> |<br /> |INCL. LOCKNUT<br /> |1<br /> |-<br /> |8<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |GRIP SIZE .250&quot; TO .375&quot;<br /> |1<br /> |-<br /> |9<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |GRIP SIZE .450&quot; TO .560&quot;<br /> |2<br /> |-<br /> |10<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |11<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |}<br /> [[File:BE-TS (Current) Control Panel for Units with 20HP Details.png|alt=BE-TS (Current) Control Panel for Units with 20HP Details|frameless|645x645px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |YE0506<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |''Blank panel without holes''<br /> |1<br /> |-<br /> |2<br /> |YE0205-1<br /> |SWITCH-DISCONNECT-80A<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43036007<br /> |SHAFT-DISCONNECT<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |YE0409<br /> |FUSE HOLDER-SINGLE POLE<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |E0914<br /> |FUSE-10A<br /> |<br /> |''FLM-10''<br /> |1<br /> |-<br /> |6<br /> |E0902<br /> |FUSE-6A<br /> |<br /> |''FLM-6''<br /> |1<br /> |-<br /> |7<br /> |E0903<br /> |FUSE-12A<br /> |<br /> |''FLM-12''<br /> |1<br /> |-<br /> |8<br /> |YE0402<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |17<br /> |-<br /> |9<br /> |YE0405<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |YE0406<br /> |END ANCHOR<br /> |<br /> |<br /> |6<br /> |-<br /> |11<br /> |E0136<br /> |FUSE HOLDER-3 POLE<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |YE0901<br /> |FUSE-40A<br /> |<br /> |JTD-40-ID<br /> |3<br /> |-<br /> |13<br /> |E1013<br /> |BASE-RELAY<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |E1012<br /> |RELAY-11 PIN<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |E0137<br /> |FUSE HOLDER-2 POLE<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |YE0902<br /> |FUSE-10A<br /> |<br /> |''KLDR-10''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |17<br /> |N/A<br /> |CONTACTOR, &quot;A40&quot; SERIES<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |E0132-1<br /> |CONTACTOR, &quot;AF38&quot; SERIES<br /> |80332009<br /> |<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |18<br /> |N/A<br /> |OVERLOAD, &quot;TA&quot; SERIES<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |E0131-1<br /> |OVERLOAD, &quot;TF&quot; SERIES<br /> |80332009<br /> |<br /> |1<br /> |-<br /> |19<br /> |E1023<br /> |WIREWAY<br /> |<br /> |''Sold by length''<br /> |A/R<br /> |-<br /> |20<br /> |E0908<br /> |MOUNTING RAIL<br /> |<br /> |''Sold by length''<br /> |A/R<br /> |-<br /> |21<br /> |E1070<br /> |GROUND BAR-4 POSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |22<br /> |E1071<br /> |GROUND BAR-7 POSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |23<br /> |HW1061<br /> |SCREW-RHMS-#8-32 X 1&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |24<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> | rowspan=&quot;3&quot; |''Track and Wireway mounting hardware (Not shown)''<br /> |14<br /> |-<br /> |25<br /> |HW0133<br /> |WASHER-FLAT-#8<br /> |<br /> |14<br /> |-<br /> |26<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |17<br /> |-<br /> |27<br /> |E0139<br /> |AUXILIARY CONTACT BLOCK<br /> |80332009<br /> |''†† See notes''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† &quot;A40&quot; Series Contactor and &quot;TA&quot; Series Overload no longer available as of mid-March 2022. Components must be replaced with current Overload &amp; Relay Kit 80332009.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Auxiliary contact Block required for units equipped with &quot;AF38&quot; Series Contactor &amp; &quot;TF&quot; Series Overload.''<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Transformer&lt;/big&gt;&lt;/u&gt;''' ===<br /> '''&lt;big&gt;''Transformer for Units with 20 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS Transformer for Units with 20HP.png|alt=BE-TS Transformer for Units with 20HP|frameless|554x554px]]<br /> <br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0220<br /> |TRANSFORMER<br /> |<br /> |''480VAC to 120VAC, 3kVA''<br /> |1<br /> |-<br /> |2<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |3<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |7<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |3<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;Operator Console&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Operator Console Electrical.png|alt=BE-TS Operator Console Electrical|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0327<br /> |KEYED ACTUATOR ASSEMBLY<br /> |<br /> |''Includes 2 Keys &amp; Contact Block'' <br /> |1<br /> |-<br /> |2<br /> |E0351<br /> |KEY-REPLACEMENT<br /> |<br /> |''Set of 2 Keys''<br /> |A/R<br /> |-<br /> |3<br /> |E0309-1<br /> |HOUR METER<br /> |<br /> |''† Includes mounting hardware''<br /> |1<br /> |-<br /> |4<br /> |N/A<br /> |SWITCH-SELECTOR-3 POSITION<br /> |<br /> |''ON-OFF-ON, †† See notes''<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |5<br /> |N/A<br /> |LEGEND PLATE-VACUUM<br /> |<br /> |''††† See notes''<br /> |1<br /> |-<br /> |N/A<br /> |LEGEND PLATE-MAGNET<br /> |<br /> |''††† See notes''<br /> |1<br /> |-<br /> |6<br /> |N/A<br /> |CONTACT BLOCK-N/O<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |7<br /> |N/A<br /> |CONTACT BLOCK-N/C<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |8<br /> |E1083<br /> |SWITCH-SELECTOR-3 POSITION<br /> |80232001<br /> |''OFF-ON-OFF''<br /> |1<br /> |-<br /> |9<br /> |E1080<br /> |CONTACT BLOCK-N/O &amp; N/C<br /> |80232001<br /> |<br /> |2<br /> |-<br /> |10<br /> |YE0311<br /> |SWITCH-EMERGENCY STOP<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |YE0407<br /> |LEGEND PLATE-EMERGENCY STOP<br /> |<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Current Hour Meter is 3-Bolt version. Replacement of 4-Bolt version will require new mounting holes to be drilled in dashboard.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Parts no longer available. Must order new Selector Switch Kit 80232001''<br /> |-<br /> | colspan=&quot;6&quot; |''††† Parts no longer available. See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Labels_&amp;_Placards Labels &amp; Placards] section for current Placards''<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;Foot Switch&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Foot Switch Electrical.png|alt=BE-TS Foot Switch Electrical|frameless|701x701px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0301-1<br /> |SWITCH-FOOT OPERATED<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .500&quot; to .625&quot;''<br /> |1<br /> |-<br /> |3<br /> |E0515<br /> |CORD-14-3-SO/SOW<br /> |<br /> |<br /> |9'<br /> |-<br /> |4<br /> |HC0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |''If equipped''<br /> |2<br /> |-<br /> |5<br /> |HC0103<br /> |WASHER-1/4&quot;-LOCK<br /> |<br /> |''If equipped''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Open-Style Switch is a direct replacement for discontinued, Covered-Style Switch.'' <br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''Gate Switch'''&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Gate Switch Electrical.png|alt=BE-TS Gate Switch Electrical|frameless|613x613px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0312<br /> |SWITCH-PUSH BUTTON<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43017041<br /> |MOUNT-GATE SWITCH<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW1077<br /> |SCREW-RHMS-#10-24 X 5/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0307<br /> |BOLT-SHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |PL0502<br /> |GROMMET-3/8&quot; I.D.<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |YE0305<br /> |SWITCH-ROLLER<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |SS0303<br /> |WASHER-FLAT-#8<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |SS0111<br /> |SCREW-SHCS-#8-32 X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |SS0203<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''Proximity Switch'''&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Proximity Switch Electrical.png|alt=BE-TS Proximity Switch Electrical|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0314<br /> |SENSOR-PROXIMITY-30MM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43017027-2<br /> |BRACKET-PROXIMITY SENSOR<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |6<br /> |43017037-2<br /> |ANGLE-PROXIMITY SENSOR TARGET<br /> |<br /> |''Rotary Actuator units'' <br /> |1<br /> |-<br /> |43017084-2<br /> |ANGLE-PROXIMITY SENSOR TARGET<br /> |<br /> |''Helical Actuator units'' <br /> |1<br /> |-<br /> |7<br /> |HW0341<br /> |BOLT-FHSCS-1/4-20 X 5/8&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''120V Receptacle'''&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Proximity Switch Electrical.png|alt=BE-TS Proximity Switch Electrical|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |3<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0650<br /> |RECEPTACLE-DUPLEX<br /> |<br /> |''† 20A''<br /> |1<br /> |-<br /> |5<br /> |E0651<br /> |COVER-RECEPTACLE-DUPLEX<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0655<br /> |RECEPTACLE-GFCI<br /> |<br /> |''20A''<br /> |1<br /> |-<br /> |7<br /> |E0656<br /> |COVER-RECEPTACLE-GFCI<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |E0654<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |E0657<br /> |COVER-RECEPTACLE-DUPLEX/GFCI<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |''Mounting hardware (Not shown)''<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† If Duplex Receptacle has Split Feed (1 set of black &amp; white wires for each plug), the Break-Off Fin must be removed prior to installation.'' <br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''Console Enclosure'''&lt;/big&gt;&lt;/u&gt; ===<br /> <br /> ==== '''&lt;big&gt;''[Discontinued] Operator Console Enclosure for Units with 10 HP Power Unit''&lt;/big&gt;''' ====<br /> [[File:BE-TS (Discontinued) Operator Console Enclosure for Units with 10 HP Power Unit.png|alt=BE-TS (Discontinued) Operator Console Enclosure for Units with 10 HP Power Unit|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-6&quot; X 6&quot; X 4 &quot;<br /> |<br /> |''Consult factory''<br /> |1<br /> |-<br /> |2<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |3<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |4<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |5<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |8<br /> |43817087-2<br /> |BRACKET-MOUNTING-ENCLOSURE<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> | rowspan=&quot;4&quot; |''Mounting bracket hardware (Not shown)''<br /> |2<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |2<br /> |}<br /> '''&lt;big&gt;''[Discontinued] Operator Console Enclosure Panel for Units with 10 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS (Discontinued) Operator Console Enclosure Panel for Units with 10 HP Power Unit.png|alt=BE-TS (Discontinued) Operator Console Enclosure Panel for Units with 10 HP Power Unit|frameless|566x566px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0639<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |''Without holes''<br /> |1<br /> |-<br /> |2<br /> |E1024<br /> |TRACK-TERMINAL BLOCK<br /> |<br /> |''4 7/8&quot; LG''<br /> |1<br /> |-<br /> |3<br /> |E1020<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |9<br /> |-<br /> |4<br /> |E1330<br /> |END ANCHOR<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |E1040<br /> |END BARRIER<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0341<br /> |GROUND LUG<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |''2 for track mounting''<br /> |3<br /> |-<br /> |8<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |''2 for track mounting''<br /> |3<br /> |-<br /> |9<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |''2 for track mounting''<br /> |3<br /> |}<br /> '''&lt;big&gt;''[Current] Operator Console Enclosure for Units with 20 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS (Current) Operator Console Enclosure for Units with 20 HP Power Unit.png|alt=BE-TS (Current) Operator Console Enclosure for Units with 20 HP Power Unit|frameless|549x549px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-8&quot; X 8&quot; X 4&quot;<br /> |<br /> |''Consult factory''<br /> |1<br /> |-<br /> |2<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |3<br /> |-<br /> |3<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .625&quot; to .750&quot;''<br /> |1<br /> |-<br /> |4<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''† Grip size .450&quot; to .560&quot;''<br /> |4<br /> |-<br /> |5<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''†'' ''Grip size .250&quot; to .375&quot;''<br /> |4<br /> |-<br /> |6<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |11<br /> |-<br /> |7<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |E1349<br /> |SEAL-KNOCKOUT-1/2&quot;<br /> |<br /> |''† See notes''<br /> |A/R<br /> |-<br /> |9<br /> |43037003-2<br /> |BRACKET-MOUNTING-ENCLOSURE<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> | rowspan=&quot;4&quot; |''Mounting bracket hardware (Not shown)''<br /> |2<br /> |-<br /> |12<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |2<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Restraints sold for machines equipped with all available options. Machines built without certain options will have Knockout Seals (Item #8) installed in place of restraints.''<br /> |}<br /> '''&lt;big&gt;''[Current] Operator Console Enclosure Panel for Units with 20 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS (Current) Operator Console Enclosure Panel for Units with 20 HP Power Unit.png|alt=BE-TS (Current) Operator Console Enclosure Panel for Units with 20 HP Power Unit|frameless|527x527px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0135<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |''Blank panel without holes''<br /> |1<br /> |-<br /> |2<br /> |E0908<br /> |MOUNTING RAIL<br /> |<br /> |''Sold by length''<br /> |A/R<br /> |-<br /> |3<br /> |YE0402<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |14<br /> |-<br /> |4<br /> |YE0405<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |YE0406<br /> |END ANCHOR<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |E1074<br /> |JUMPER-2 POLE<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |E0130<br /> |GROUND BAR-7 POSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW1061<br /> |SCREW-RHMS-#8-32 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> | rowspan=&quot;3&quot; |''Track and Wireway mounting hardware (Not shown)''<br /> |2<br /> |-<br /> |10<br /> |HW0133<br /> |WASHER-FLAT-#8<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |4<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''Junction Box'''&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Junction Box.png|alt=BE-TS Junction Box|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |2<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |3<br /> |-<br /> |3<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .500&quot; to .625&quot;''<br /> |4<br /> |-<br /> |4<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .625&quot; to .750&quot;''<br /> |2<br /> |-<br /> |5<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Top Module Junction Box&lt;/big&gt;''''' ====<br /> [[File:BE-TS Junction Box.png|alt=BE-TS Junction Box|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1329<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0662<br /> |RESTRAINT-3/4&quot;-LIQUID TIGHT<br /> |<br /> |''Includes Locknut'' <br /> |1<br /> |-<br /> |3<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .625&quot; to .750&quot;''<br /> |1<br /> |-<br /> |4<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Wiring Diagrams&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;BE-TS with 10 HP Motor Wiring Diagram&lt;/big&gt;''''' ====<br /> [[File:BE-TS Wiring Diagram-10HP Motor.png|alt=BE-TS Wiring Diagram-10HP Motor|frameless|800x800px]]<br /> <br /> ==== '''''&lt;big&gt;BE-TS with Magnet and 10 HP Motor Wiring Diagram&lt;/big&gt;''''' ====<br /> [[File:BE-TS with Magnet and 10HP Motor Wiring Diagram.png|alt=BE-TS with Magnet and 10HP Motor Wiring Diagram|frameless|800x800px]]<br /> <br /> ==== '''''&lt;big&gt;BE-TS with Magnet and 20 HP Motor Wiring Diagram&lt;/big&gt;''''' ====<br /> [[File:BE-TS Magnet Wiring Diagram-20HP Motor.png|alt=BE-TS Magnet Wiring Diagram-20HP Motor|frameless|800x800px]]<br /> <br /> [[File:BE-TS Magnet Wiring Diagram-20HP Motor-02.png|alt=BE-TS Magnet Wiring Diagram-20HP Motor-02|frameless|800x800px]]<br /> <br /> [[File:BE-TS Magnet Wiring Diagram-20HP Motor-03.png|alt=BE-TS Magnet Wiring Diagram-20HP Motor-03|frameless|800x800px]]<br /> <br /> [[File:BE-TS Magnet Wiring Diagram-20HP Motor-04.png|alt=BE-TS Magnet Wiring Diagram-20HP Motor-04|frameless|800x800px]]<br /> <br /> == &lt;big&gt;Hydraulics&lt;/big&gt; ==<br /> <br /> === '''&lt;big&gt;&lt;u&gt;[Discontinued] 10 HP Power Unit&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:(Discontinued) BE-TS Power Unit (10HP).png|alt=(Discontinued) BE-TS Power Unit (10HP)|frameless|553x553px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0011<br /> |MOTOR-ELECTRIC-10HP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0326<br /> |ADAPTER-PUMP TO MOTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0325<br /> |PUMP-VANE-16 GPM<br /> |<br /> |''Variable displacement''<br /> |1<br /> |-<br /> |4<br /> |HC0327<br /> |COUPLING BODY-1 3/8&quot;<br /> |<br /> |''Motor end''<br /> |1<br /> |-<br /> |5<br /> |HC0329<br /> |SPIDER-COUPLING INSERT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HC0328<br /> |COUPLING BODY-7/8&quot;<br /> |<br /> |''Pump end''<br /> |1<br /> |-<br /> |7<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1 1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H1549<br /> |ADAPTER-#20 JICM X #24 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |H1595<br /> |ADAPTER-90 DEG-#20 JICM X #20 JICSW<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |H1609<br /> |ADAPTER-90 DEG-#12 JICM X #16 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |H1522<br /> |ADAPTER-#12 JICSW X #12 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |HC0260<br /> |VALVE-MAIN SYSTEM RELIEF<br /> |<br /> |<br /> |1<br /> |-<br /> |15a<br /> |43846003<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''†† For Item 15 (Not shown)''<br /> |A/R<br /> |-<br /> |16<br /> |HC0318<br /> |GAUGE-PRESSURE<br /> |<br /> |<br /> |1<br /> |-<br /> |17<br /> |H0206<br /> |PLUG-#4 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |H1108<br /> |ADAPTER-#10 JICM X #12 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |H1522<br /> |ADAPTER-#12 JICSW X #12 SAEM<br /> |<br /> |''† See note''<br /> |1<br /> |-<br /> |20<br /> |H1542<br /> |ADAPTER-#12 JICM X #12 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |21<br /> |HC0280<br /> |VALVE-CHECK<br /> |<br /> |''† See note''<br /> |1<br /> |-<br /> |22<br /> |H1542<br /> |ADAPTER-#12 JICM X #12 SAEM<br /> |<br /> |''† See note''<br /> |1<br /> |-<br /> |23<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .500&quot; to .625&quot;''<br /> |1<br /> |-<br /> |23a<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |''For Item 23 (Not shown)''<br /> |1<br /> |-<br /> |24<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |25<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |26<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |27<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Parts noted used on units built after April 2001.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Cartridges are for replacement only.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;[Discontinued] 30 Gallon Reservoir&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:(Discontinued) BE-TS 30 Gallon Reservoir.png|alt=(Discontinued) BE-TS 30 Gallon Reservoir|frameless|542x542px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43842001<br /> |RESERVOIR-VERTICAL-30 GAL<br /> |<br /> |''Includes Items 1 through 8''<br /> |1<br /> |-<br /> |1<br /> |HC0542<br /> |GASKET-CHANNEL<br /> |<br /> |''Sold by length''<br /> |7'<br /> |-<br /> |2<br /> |HC0340<br /> |GAUGE-SIGHT<br /> |<br /> |''with Thermometer''<br /> |1<br /> |-<br /> |3<br /> |HC0306<br /> |STRAINER-SUCTION<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HC0308<br /> |FILLER/BREATHER ASSEMBLY<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0209<br /> |SCREW-RHMS-10-32 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |BI0110<br /> |ELBOW-STR-90 DEG-#16 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |8<br /> |H0208<br /> |PLUG-#12 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1590<br /> |ADAPTER-90 DEG-#16 JICM X #16 FNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |BI0102<br /> |ELBOW-#12 FNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |BI0020<br /> |NIPPLE-#12 NPT X 3&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |BI0301<br /> |TEE-#12 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |H1502<br /> |ADAPTER-#8 JICM X #12 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |BI0002<br /> |NIPPLE-CLOSE-#12 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HC0307<br /> |RETURN LINE FILTER ASSEMBLY<br /> |<br /> |''Housing and Filter''<br /> |1<br /> |-<br /> |16<br /> |HC0317<br /> |FILTER-RETURN LINE<br /> |<br /> |''Replacement filter''<br /> |1<br /> |-<br /> |17<br /> |H1509<br /> |ADAPTER-#10 JICM X #12 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> | rowspan=&quot;4&quot; |''Mounting hardware''<br /> <br /> ''(Not shown)''<br /> |4<br /> |-<br /> |19<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |8<br /> |-<br /> |20<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |4<br /> |-<br /> |21<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;[Current] Power Unit (20 HP)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:(Current) BE-TS 30 Power Unit (20 HP).png|alt=(Current) BE-TS 30 Power Unit (20 HP)|frameless|531x531px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0040<br /> |MOTOR-ELECTRIC-20 HP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0357<br /> |ADAPTER-PUMP TO MOTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0356<br /> |PUMP-PISTON-71CC<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HC0358-M<br /> |COUPLING BODY-M300-1 5/8&quot; BORE<br /> |<br /> |''MOTOR SIDE''<br /> |1<br /> |-<br /> |5<br /> |HC0358-I<br /> |SPIDER-COUPLING INSERT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HC0358-P<br /> |COUPLING BODY-M300-1 1/4&quot; BORE<br /> |<br /> |''PUMP SIDE''<br /> |1<br /> |-<br /> |7<br /> |HW0602<br /> |BOLT-HHCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0113<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |H1604<br /> |ADAPTER-90 DEG-#12 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HC0363<br /> |ADAPTER-FLANGE-#32 NPT<br /> |<br /> |''Includes O-ring''<br /> |1<br /> |-<br /> |11<br /> |HC0240<br /> |BLOCK-CHECK VALVE<br /> |<br /> |''Includes Cartridge &amp; O-ring''<br /> |1<br /> |-<br /> |12<br /> |N/A<br /> |CARTRIDGE-CHECK VALVE<br /> |<br /> |''† Replacement cartridge''<br /> |A/R<br /> |-<br /> |13<br /> |H0300<br /> |ELBOW-STR-90 DEG-#4 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |HC0318<br /> |GAUGE-PRESSURE<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |HE0704<br /> |ADAPTER-SPLIT FLANGE-1&quot;<br /> |<br /> |''2-Piece adapter with O-ring''<br /> |1<br /> |-<br /> |16<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |H0211<br /> |ADAPTER-#24 NPT X #12<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |E0661<br /> |RESTRAINT-3/4&quot;-90 DEG-LIQUID TIGHT<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |HW0513<br /> |BOLT-HHCS-1/2-13 X 2 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |20<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |21<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTE<br /> |-<br /> | colspan=&quot;6&quot; |''† Consult factory''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;[Current] 45 Gallon Reservoir&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:(Current) BE-TS 45 Gallon Reservoir.png|alt=(Current) BE-TS 45 Gallon Reservoir|frameless|547x547px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43842010<br /> |45 GAL RESERVOIR ASSEMBLY<br /> |<br /> |''Includes Items 1 through 7''<br /> |A/R<br /> |-<br /> |1<br /> |43848005<br /> |PLATE-COVER<br /> |<br /> |''† See note''<br /> |1<br /> |-<br /> |2<br /> |HC0308<br /> |FILLER/BREATHER ASSEMBLY<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0209<br /> |SCREW-RHMS-10-32 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |4<br /> |HC0340<br /> |GAUGE-SIGHT<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H0208<br /> |PLUG-#12 NPT<br /> |<br /> |''Non-IIoT equipped units only''<br /> |1<br /> |-<br /> |6<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |7<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |8<br /> |HC0361<br /> |HOUSING-FILTER<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HC0354<br /> |CARTRIDGE-FILTER<br /> |<br /> |''10 Micron filtration''<br /> |1<br /> |-<br /> |10<br /> |HC0362<br /> |FLANGE-SUCTION TUBE<br /> |<br /> |''Includes hardware''<br /> |1<br /> |-<br /> |11<br /> |43848008<br /> |TUBE-SUCTION<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |H1569<br /> |ADAPTER-45 DEG-#12 JICM X #12 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |H0202<br /> |REDUCER-#24 SAE X #12 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |H1622<br /> |ADAPTER-90 DEG-#12 SAEM X #12 JICM<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |H1644<br /> |PLUG-#24 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |H1610<br /> |ADAPTER-45 DEG-#12 JICSW X #12 JICM<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |PB0311-1<br /> |NIPPLE-#12 NPT X 2&quot;-BRASS<br /> |<br /> | rowspan=&quot;3&quot; |''†† See notes''<br /> |1<br /> |-<br /> |20<br /> |BI0301<br /> |TEE-#12 FNPT<br /> |<br /> |1<br /> |-<br /> |21<br /> |H1502<br /> |ADAPTER-#8 JICM X #12 MNPT<br /> |<br /> |2<br /> |-<br /> |22<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> | rowspan=&quot;5&quot; |''Reservoir mounting hardware'' <br /> <br /> ''(Not shown)''<br /> |2<br /> |-<br /> |23<br /> |HW0405<br /> |BOLT-HHCS-3/8-16 X 2&quot;<br /> |<br /> |2<br /> |-<br /> |24<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |8<br /> |-<br /> |25<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |4<br /> |-<br /> |26<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† RVT silicone required to seal cover plate after removal.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Components required for units equipped with radial piston drive wheel motors plumbed with case drain hoses. See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Drive_Wheel_Assembly Drive Wheel Assembly] section.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Valve Assembly&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Lift Valve and Manifold Detail&lt;/big&gt;''''' ====<br /> [[File:BE-TS Lift Valve and Manifold.png|alt=BE-TS Lift Valve and Manifold|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |80342001<br /> |LEVER VALVE RETRO KIT<br /> |<br /> |''† Required prior to 2006'' <br /> |A/R<br /> |-<br /> |1<br /> |HC0257<br /> |VALVE-LEVER<br /> |<br /> |''Effective from 2006 to Present''<br /> |1<br /> |-<br /> |2<br /> |HC0252<br /> |MANIFOLD-D05-1 BANK<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0318<br /> |BOLT-SHCS-1/4-20 X 1 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |H1642<br /> |PLUG-#12 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H1542<br /> |ADAPTER-#12 JICM X #12 SAEM<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HC0248<br /> |FIXED FLOW REGULATOR<br /> |<br /> |''††14 GPM''<br /> |1<br /> |-<br /> |12<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |13<br /> |H1540<br /> |ADAPTER-#8 JICM X #8 SAEM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |14<br /> |43817085<br /> |PLATE-ADAPTER-VALVE<br /> |<br /> |''† Not shown''<br /> |1<br /> |-<br /> |15<br /> |SS0104<br /> |BOLT-SHCS-1/4-20 X 5/8&quot;-SST<br /> |<br /> |''† Not shown''<br /> |4<br /> |-<br /> |16<br /> |SS0300<br /> |WASHER-FLAT-1/4&quot;-SAE-SST<br /> |<br /> |''† Not shown''<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |<br /> |-<br /> | colspan=&quot;6&quot; |''† Kit includes Items 1 &amp; 14 through 16. Minor modifications to the dash board required.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† For units shipped April 2017 to present''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Floor Drive / Arm Rotation Valve and Manifold Detail&lt;/big&gt;''''' ====<br /> [[File:BE-TS Floor Drive-Arm Rotation Valve and Manifold.png|alt=BE-TS Floor Drive-Arm Rotation Valve and Manifold|frameless|570x570px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0233<br /> |VALVE-LEVER<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HC0251<br /> |MANIFOLD-D03-2 BANK<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1545<br /> |ADAPTER-#10 JICM X #10 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |H1600<br /> |ADAPTER-90 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |H1587<br /> |ADAPTER-#6 JICSW X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HC0211<br /> |VALVE-ADJUSTABLE FLOW CONTROL<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |H1504<br /> |ADAPTER-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |H1640<br /> |PLUG-#6 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |43817033-2<br /> |RISER PLATE<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |14<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |HC0233-SK<br /> |SEAL KIT<br /> |<br /> |''For Item 1 (Not shown)''<br /> |A/R<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Valve Assembly&lt;/big&gt;''''' ====<br /> [[File:BE-TS Valve Assembly.png|alt=BE-TS Valve Assembly|frameless|538x538px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0233<br /> |VALVE-LEVER<br /> |<br /> |<br /> |3<br /> |-<br /> |2<br /> |HC0250<br /> |MANIFOLD-D03-3 BANK<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1610<br /> |ADAPTER-90 DEG-#10 JICM X #10 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |H1641<br /> |PLUG-#10 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H1000<br /> |ADAPTER-#8 SAEM X #4 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |H0001<br /> |NIPPLE-#4 NPT<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HC0247<br /> |FIXED FLOW REGULATOR-2.25 GPM<br /> |<br /> |''† See notes''<br /> |4<br /> |-<br /> |8<br /> |H1504<br /> |ADAPTER-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |H1640<br /> |PLUG-#6 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |H1540<br /> |ADAPTER-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |43817034-2<br /> |RISER PLATE<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |14<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |15<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HC0233-SK<br /> |SEAL KIT<br /> |<br /> |''For Item 1 (Not shown)''<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Units built prior to January 2107 equipped with Adjustable Flow Controls. Fixed Flow Regulators are direct replacement for Adjustable Flow Controls.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Lift Cylinder&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Lift Cylinder.png|alt=BE-TS Lift Cylinder|frameless|582x582px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43822006<br /> |CLEVIS ASSEMBLY<br /> |<br /> |''Sold as assembly only''<br /> |4<br /> |-<br /> |2<br /> |HW0813<br /> |SCREW-SHSS-3/8-16 X 1/2&quot;<br /> |<br /> |''Nylon tipped''<br /> |8<br /> |-<br /> |3<br /> |HC0420<br /> |CYLINDER-LIFT<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |H1645<br /> |ADAPTER-90 DEG-#8 SAEM X #6 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |H0212<br /> |ADAPTER-#6 NPT X #8 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HC0425<br /> |VELOCITY FUSE<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Lift Circuit&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Lift Circuit.png|alt=BE-TS Lift Circuit|frameless|553x553px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43017014-2<br /> |SUPPORT-PILOT DOWN MANIFOLD<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43718008<br /> |STANDOFF<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0315<br /> |BOLT-HHCS-1/4-20 X 4 1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |10<br /> |-<br /> |7<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |5<br /> |-<br /> |8<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |5<br /> |}<br /> <br /> ==== '''''&lt;big&gt;[Discontinued] Lift Circuit Configuration&lt;/big&gt;''''' ====<br /> [[File:(Discontinued) BE-TS Lift Circuit Configuration.png|alt=(Discontinued) BE-TS Lift Circuit Configuration|frameless|507x507px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |H1507<br /> |ADAPTER-#8 JICM X #8 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0264<br /> |VALVE-CHECK-PILOT TO OPEN<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H1621<br /> |ADAPTER-#4 SAEM X #2 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HC0269<br /> |VALVE-ADJUSTABLE FLOW CONTROL<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |H1591<br /> |ADAPTER-90 DEG-#6 JICM X #2 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |H1587<br /> |ADAPTER-#6 JICSW X #4 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1501<br /> |ADAPTER-#8 JICM X #6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43047002<br /> |MANIFOLD-PILOT DOWN<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> ==== '''''&lt;big&gt;[Current] Lift Circuit Configuration&lt;/big&gt;''''' ====<br /> [[File:(Current) BE-TS Lift Circuit Configuration.png|alt=(Current) BE-TS Lift Circuit Configuration|frameless|534x534px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0215<br /> |VALVE-CHECK-CARTRIDGE<br /> |<br /> |<br /> |8<br /> |-<br /> |2<br /> |H1560<br /> |ADAPTER-45 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |H1670<br /> |ADAPTER-45 DEG-#12 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |H1612<br /> |ADAPTER-90 DEG-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HC0283<br /> |VALVE-COUNTER BALANCE<br /> |<br /> |''Includes cartridge''<br /> |1<br /> |-<br /> |6<br /> |43846004<br /> |CARTRIDGE-COUNTER BALANCE<br /> |<br /> |''Replacement cartridge''<br /> |A/R<br /> |-<br /> |7<br /> |H1552<br /> |ADAPTER-#6 JICM X #6 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |H1587<br /> |ADAPTER-#6 JICSW X #4 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1501<br /> |ADAPTER-#8 JICM X #6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43047002<br /> |MANIFOLD-PILOT DOWN<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Cartridges are for replacement only''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Down-Speed Flow Control&lt;/big&gt;''''' ====<br /> [[File:BE-TS Down-Speed Flow Control.png|alt=BE-TS Down-Speed Flow Control|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0270<br /> |VALVE-ADJUSTABLE FLOW CONTROL<br /> |<br /> |''Pressure compensated''<br /> |1<br /> |-<br /> |2<br /> |H0007<br /> |NIPPLE-#8 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1647<br /> |ADAPTER-90 DEG-#10 SAEM X #8 FNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |H1680<br /> |ADAPTER-#10 JICM X #8 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H1690<br /> |ADAPTER-#10 JICSW X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HC0248<br /> |FIXED FLOW REGULATOR<br /> |<br /> |''14 GPM''<br /> |1<br /> |-<br /> |7<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |H1612<br /> |ADAPTER-90 DEG-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1547<br /> |ADAPTER-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Cross Port Relief&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Mounting Configuration&lt;/big&gt;''''' ====<br /> [[File:BE-TS Cross Port Relief Mounting Configuration.png|alt=BE-TS Cross Port Relief Mounting Configuration|frameless|546x546px]]<br /> {| class=&quot;wikitable&quot;<br /> ! colspan=&quot;6&quot; |UNITS BUILT PRIOR TO SEPTEMBER, 2014<br /> |-<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> ! colspan=&quot;6&quot; |UNITS BUILT SEPTEMBER, 2014 TO DECEMBER, 2014<br /> |-<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW0305<br /> |BOLT-HHCS-1/4-20 X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |7<br /> |43058004<br /> |PLATE-SPACER<br /> |<br /> |<br /> |1<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> ! colspan=&quot;6&quot; |UNITS BUILT DECEMBER, 2014 TO PRESENT<br /> |-<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |2<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |}<br /> ''NOTE: Effectivity dates refer to dates new extractor units shipped from the factory. Replacement part effectivity may differ due to factory inventory levels at time of parts order. Consult factory if unsure of parts needed.''<br /> <br /> ==== '''''&lt;big&gt;Components&lt;/big&gt;''''' ====<br /> [[File:BE-TS Cross Port Relief Components.png|alt=BE-TS Cross Port Relief Components|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0262<br /> |VALVE-CROSS PORT RELIEF<br /> |<br /> |''Includes cartridges''<br /> |1<br /> |-<br /> |2<br /> |43046002<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''For Item 1''<br /> |A/R<br /> |-<br /> |3<br /> |H1540<br /> |ADAPTER-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |H1507<br /> |ADAPTER-#8 JICM X #8 MNPT<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |HC0239<br /> |VALVE-ADJUSTABLE FLOW CONTROL<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |H1568<br /> |ADAPTER-45 DEG-#8 JICM X #8 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |H1646<br /> |ADAPTER-90 DEG-#8 SAEM X #6 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |H0805<br /> |TEE-#6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HC0273<br /> |REGULATOR-FIXED FLOW<br /> |<br /> |''7.0 GPM''<br /> |4<br /> |-<br /> |11<br /> |H1501<br /> |ADAPTER-#8 JICM X #6 MNPT<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Floor Drive Cutout&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Floor Drive Cutout.png|alt=BE-TS Floor Drive Cutout|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |SOLENOID-DRIVE CUTOUT<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |7<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |BI0001<br /> |NIPPLE-CLOSE-#8 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |N/A<br /> |SOLENOID-DRIVE CUTOUT<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |10<br /> |YE0501<br /> |CONNECTOR-SOLENOID<br /> |<br /> |''DIN 43650''<br /> |1<br /> |-<br /> |11<br /> |43058004<br /> |PLATE-SPACER<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |HC0278-TS/QS<br /> |SOLENOID-DRIVE CUTOUT<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |H1547<br /> |ADAPTER-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |H1612<br /> |ADAPTER-90 DEG-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Part obsolete. Must be replaced with Retro Kit Part # 80242007.''<br /> |-<br /> | colspan=&quot;6&quot; |''NOTE: Effectivity dates refer to dates new extractor units shipped from the factory. Replacement part effectivity may differ due to factory inventory levels at time of parts order. Consult factory if unsure of parts needed.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Counter Balance Valve&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Counter Balance Valve.png|alt=BE-TS Counter Balance Valve|frameless|554x554px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0263<br /> |VALVE-COUNTER BALANCE<br /> |<br /> |<br /> |1<br /> |-<br /> |1a<br /> |43046004<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''† For Item 1 (Not shown)''<br /> |A/R<br /> |-<br /> |2<br /> |H1615<br /> |ADAPTER-90 DEG-#6 JICM X #6 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |H1552<br /> |ADAPTER-#6 JICM X #6 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0305<br /> |BOLT-HHCS-1/4-20 X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Cartridges are for replacement only''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Transition Plate&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Transition Plate.png|alt=BE-TS Transition Plate|frameless|576x576px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817067-2<br /> |PLATE-TRANSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |H0020<br /> |UNION-BULKHEAD-45 DEG-#6 JICM<br /> |<br /> |<br /> |8<br /> |-<br /> |3<br /> |H0021<br /> |NUT-BULKHEAD-#6 JIC<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Return Line Manifold&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Return Line Manifold.png|alt=BE-TS Return Line Manifold|frameless|555x555px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43847001<br /> |MANIFOLD-RETURN LINE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |H1501<br /> |ADAPTER-#8 JICM X #6 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1503<br /> |ADAPTER-#12 JICM X #12 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |43817069-2<br /> |BRACKET-BULKHEAD<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |H0015<br /> |UNION-BULKHEAD-90 DEG-#12 JICM<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H0016<br /> |NUT-BULKHEAD-#12 JIC<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;EQ Chain Hose Guard&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS EQ Chain Hose Guard.png|alt=BE-TS EQ Chain Hose Guard|frameless|577x577px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43017074-2<br /> |GUARD-HOSE-EQ CHAIN<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Used on units manufactured after May 2015.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Hydraulic Schematics&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Hydraulic Schematic.png|alt=BE-TS Hydraulic Schematic|frameless|1180x1180px]]<br /> <br /> ==== '''''&lt;big&gt;Extended Reach Hydraulic Schematics&lt;/big&gt;''''' ====<br /> [[File:BE-TS Hydraulic Schematic Extended Reach.png|alt=BE-TS Hydraulic Schematic Extended Reach|frameless|905x905px]]<br /> <br /> == &lt;big&gt;Standard Available Options&lt;/big&gt; ==<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Strobe &amp; Alarm&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''&lt;big&gt;''[Discontinued] Strobe Light &amp; Stanchion Configuration''&lt;/big&gt;''' ====<br /> [[File:(Discontinued) BE-TS Strobe Light.png|alt=(Discontinued) BE-TS Strobe Light|frameless|722x722px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0317<br /> |STROBE LIGHT<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41215014<br /> |STANCHION<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0401<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |E1010<br /> |RECEPTACLE-TWIST LOCK<br /> |<br /> |''(Not shown)''<br /> |1<br /> |-<br /> |7<br /> |E1011<br /> |PLUG-TWIST LOCK<br /> |<br /> |''(Not shown)''<br /> |1<br /> |}<br /> <br /> ==== '''&lt;big&gt;''[Discontinued] Audible Alarm Configuration''&lt;/big&gt;''' ====<br /> [[File:(Discontinued) BE-TS Audible Alarm.png|alt=(Discontinued) BE-TS Audible Alarm|frameless|490x490px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0317-A<br /> |AUDIBLE ALARM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0654<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |00117101-2<br /> |MOUNTING BRACKET<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |5<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> ==== '''&lt;big&gt;''[Current] Stack Light Strobe &amp; Alarm Configuration''&lt;/big&gt;''' ====<br /> [[File:(Current) BE-TS Stack Light Strobe and Alarm Configuration.png|alt=(Current) BE-TS Stack Light Strobe and Alarm Configuration|frameless|844x844px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0362<br /> |MOUNTING BASE<br /> |<br /> |''Includes restraints''<br /> |1<br /> |-<br /> |2<br /> |E0365<br /> |TERMINAL BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0363<br /> |STROBE LIGHT-AMBER-120VAC<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |4<br /> |E0364<br /> |AUDIBLE ALARM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |5<br /> |SS0118<br /> |SCREW-SHCS-#8-32 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |SS0303<br /> |WASHER-FLAT-#8<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |SS0203<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |E1010<br /> |RECEPTACLE-TWIST LOCK<br /> |<br /> |''(Not shown)''<br /> |1<br /> |-<br /> |9<br /> |E1011<br /> |PLUG-TWIST LOCK<br /> |<br /> |''(Not shown)''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† For units not equipped with the audible alarm option, a cap (not shown) mounts on top of the strobe light in place of the audible alarm. Cap included with base.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† For units not equipped with the strobe light option, the audible alarm mounts directly to the terminal base in place of the strobe light.'' <br /> |}<br /> <br /> ==== '''&lt;big&gt;''Strobe &amp; Alarm Mounting''&lt;/big&gt;''' ====<br /> [[File:BE-TS Strobe and Alarm Mounting.png|alt=BE-TS Strobe and Alarm Mounting|frameless|516x516px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41235060<br /> |STACK LIGHT STANCHION<br /> |<br /> |''Discontinued''<br /> |A/R<br /> |-<br /> |2<br /> |HW0401<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |3<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |4<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |REF<br /> |43032006<br /> |STANCHION ASSEMBLY<br /> |<br /> |''Includes items 5 through 8''<br /> |A/R<br /> |-<br /> |5<br /> |43035003<br /> |STACK LIGHT STANCHION<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43037007-2<br /> |CLAMP BRACKET<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0305<br /> |BOLT-HHCS-1/4-20 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0050<br /> |NUT-FLANGED-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |43037004-2<br /> |MOUNTING BRACKET<br /> |<br /> |''Overhead Guard only''<br /> |1<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Horn&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Horn.png|alt=BE-TS Horn|frameless|565x565px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |YE0308<br /> |BUTTON-HORN<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0317-A<br /> |AUDIBLE ALARM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0654<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |00117101-2<br /> |MOUNTING BRACKET<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |11<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Overhead Guard&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Overhead Guard.png|alt=BE-TS Overhead Guard|frameless|530x530px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817119-2<br /> |GUARD-SIDE<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |2<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0406<br /> |BOLT-HHCS-3/8-16 X 2-1/2&quot;<br /> |<br /> |<br /> |5<br /> |-<br /> |5<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |6<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |<br /> |<br /> |5<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Side Guards used on units built November 2013 to Present. Mounting hardware valid for all units with Removable Overhead Guard.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Operator Sheild&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''&lt;big&gt;''[Current] Operator Shield''&lt;/big&gt;''' ====<br /> [[File:(Current) BE-TS 30 Operator Sheild.png|alt=(Current) BE-TS 30 Operator Sheild|frameless|566x566px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43814025<br /> |OPERATOR SHIELD<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |HC0542<br /> |GASKET EDGING<br /> |<br /> |''(2) @ 38&quot; LG, (1) @ 60&quot; LG''<br /> |136&quot;<br /> |-<br /> |3<br /> |43817116-2<br /> |BRACKET-TOP<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |1412FSW<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |43817117-2<br /> |BRACKET-CENTER SUPPORT-OUTSIDE<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43817118-2<br /> |BRACKET-CENTER SUPPORT-INSIDE<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |SS0114<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |8<br /> |SS0502<br /> |LANYARD-8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |SS0501<br /> |PIN-QUICK RELEASE-3/16&quot; X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Consult factory for units built prior to November 2013 with plexiglass bolted directly to Overhead Guard structure on front and sides.'' <br /> |}<br /> <br /> ==== '''&lt;big&gt;''Operator Shield (Used Prior to November 2013)''&lt;/big&gt;''' ====<br /> [[File:BE-TS Operator Shield (Used Prior to November 2013).png|alt=BE-TS Operator Shield (Used Prior to November 2013)|frameless|559x559px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43717116<br /> |SHIELD-OPERATOR<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |43015010<br /> |FRAME-OPERATOR SHIELD WELDMENT<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43017066-2<br /> |SUPPORT-SIDE<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |43017065-2<br /> |SUPPORT-LOWER<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43017067-2<br /> |SUPPORT-UPPER<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |7<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |32<br /> |-<br /> |8<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |9<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |16<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Consult factory for units with plexiglass bolted directly to frame.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Powered Roller Cutout&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Powered Roller Cutout Photo Eye &amp; Reflector Locations (Prior to May 2022)&lt;/big&gt;''''' ====<br /> [[File:BE-TS Powered Roller Cutout Photo Eye &amp; Reflector Locations.png|alt=BE-TS Powered Roller Cutout Photo Eye &amp; Reflector Locations|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1321A<br /> |PHOTO EYE<br /> |<br /> |''† Polarized''<br /> |1<br /> |-<br /> |2<br /> |41217170-2<br /> |MOUNT-PHOTO EYE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0216<br /> |SCREW-#10-24 X 2&quot;<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |4<br /> |HW0032<br /> |NUT-NILN-#10-24<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |E1321-R<br /> |REFLECTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |41217171<br /> |MOUNT-REFLECTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |SS0803<br /> |SCREW-RHMS-#6-32 X 5/8&quot;<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |8<br /> |SS0125<br /> |BOLT-HHCS-1/4-20 X 5/8&quot;<br /> |<br /> |''††† See notes''<br /> |4<br /> |-<br /> |9<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''Quantities provided are for Single-Sided (PRC-1) Power Roller Cutout option. For units with Double Sided (PRC-2) option, quantities are double.''<br /> |-<br /> | colspan=&quot;6&quot; |''† Polarized Photo Eye recommended to prevent potential operational issues with very smooth or shiny battery cases.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Photo Eye &amp; Reflector mounting screws are trimmed to length.''<br /> |-<br /> | colspan=&quot;6&quot; |''††† Photo Eye &amp; Reflector Bracket Mounting Screws may be required to ground flush to prevent intereferance with guards.''<br /> |}<br /> '''''&lt;big&gt;Powered Roller Cutout Photo Eye &amp; Reflector Locations (May 2022 to Present)&lt;/big&gt;'''''<br /> <br /> [[File:BE-TS Powered Roller Cutout Photo Eye &amp; Reflector Locations (May 2022 to Present).png|alt=BE-TS Powered Roller Cutout Photo Eye &amp; Reflector Locations (May 2022 to Present)|frameless|555x555px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1321A<br /> |PHOTO EYE<br /> |<br /> |''† Polarized''<br /> |1<br /> |-<br /> |2<br /> |13537001-2<br /> |MOUNT-PHOTO EYE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E1321-R<br /> |REFLECTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |41217171<br /> |MOUNT-REFLECTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |SS0803<br /> |SCREW-RHMS-#6-32 X 5/8&quot;<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |PL0506<br /> |GROMMET-SEALING-2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''Quantities provided are for Single-Sided (PRC-1) Power Roller Cutout option. For units with Double Sided (PRC-2) option, quantities are double.''<br /> |-<br /> | colspan=&quot;6&quot; |''† Polarized Photo Eye recommended to prevent potential operational issues with very smooth or shiny battery cases.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Reflector mounting screws are trimmed to length.''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Powered Roller Cutout Mounting&lt;/big&gt;''''' ====<br /> [[File:BE-TS Powered Roller Cutout Mounting.png|alt=BE-TS Powered Roller Cutout Mounting|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0281<br /> |SOLENOID VALVE<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |BI0001<br /> |NIPPLE-CLOSE-#8 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |6<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |7<br /> |H1600<br /> |ADAPTER-90 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |H1546<br /> |ADAPTER-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Powered Roller Cutout Override Button&lt;/big&gt;''''' ====<br /> [[File:BE-TS Powered Roller Cutout Override Button.png|alt=BE-TS Powered Roller Cutout Override Button|frameless|568x568px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ACTUATOR-PUSH BUTTON (DISCONTINUED)<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |N/A<br /> |CONTACT BLOCK-N/C (DISCONTINUED)<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |3<br /> |E0384<br /> |ACTUATOR-PUSH BUTTON<br /> |80932002<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0386<br /> |CONTACT BLOCK-N/C<br /> |80932002<br /> |<br /> |1<br /> |-<br /> |5<br /> |E0387<br /> |DUMMY BLOCK<br /> |80932002<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0388<br /> |PUSH BUTTON-GREEN<br /> |80932002<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''Button location on dash may vary from position shown.''<br /> |-<br /> | colspan=&quot;6&quot; |''† Parts no longer available. Must order new Push-Button Switch Kit 80932002''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Powered Roller Cutout Junction Box&lt;/big&gt;''''' ====<br /> [[File:BE-TS Powered Roller Cutout Junction Box.png|alt=BE-TS Powered Roller Cutout Junction Box|frameless|535x535px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |3<br /> |-<br /> |4<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |4<br /> |-<br /> |5<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |7<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |''Mounting bolts (Not shown)''<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Level Assist&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Level Assist.png|alt=BE-TS Level Assist|frameless|568x568px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1321A<br /> |PHOTO EYE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |13537001-2<br /> |MOUNT-PHOTO EYE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |PL0502<br /> |GROMMET<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43837007<br /> |TARGET ANGLE<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |E0376<br /> |INDICATOR LIGHT<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |7<br /> |HW0152<br /> |WASHER-5/8&quot; I.D.<br /> |<br /> |''†† See notes (Not shown)''<br /> |2<br /> |-<br /> |8<br /> |E1321-RT<br /> |REFLECTIVE TAPE<br /> |<br /> |''(Not shown)''<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''Location of Indicator Light on the dash may vary from location shown''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Extractors built prior to October 2021 used Multi-Piece Indicator Lights with Replaceable Bulb and Lens are no longer available. Current Indicator Light is a 1-Piece LED Assembly. Replacement of any Multi-Piece Component requires replacing entire assembly with current, 1-Piece Indicator Light.''<br /> |-<br /> | colspan=&quot;6&quot; |''††† Washers required for units that did not ship with Level Assist option from the factory.''<br /> |}<br /> '''&lt;big&gt;''Level Assist Junction Box''&lt;/big&gt;'''<br /> <br /> [[File:BE-TS Level Assist Junction Box.png|alt=BE-TS Level Assist Junction Box|frameless|524x524px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |4<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |5<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |''Mounting bolts (Not shown)''<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Blue Light&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Blue Light.png|alt=BE-TS Blue Light|frameless|611x611px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |EW2002B<br /> |BLUE PROJECTION SPOTLIGHT<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW0401<br /> |BOLT-HHCS-3/8-16 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0107<br /> |WASHER-LOCK-3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |4<br /> |-<br /> |5<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43835001<br /> |STANCHION-POWER<br /> |<br /> |<br /> |2<br /> |}<br /> [[File:BE-TS Blue Light Enclosure.png|alt=BE-TS Blue Light Enclosure|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-8&quot; X 8&quot; X 4&quot;<br /> |<br /> |''Consult factory''<br /> |1<br /> |-<br /> |2<br /> |E0135<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |''Blank panel without holes''<br /> |1<br /> |-<br /> |3<br /> |PS5R-SC12<br /> |POWER SUPPLY<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0908<br /> |MOUNTING RAIL<br /> |<br /> |''Sold by length''<br /> |A/R<br /> |-<br /> |5<br /> |YE0402<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |YE0405<br /> |END BARRIER<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |YE0406<br /> |END ANCHOR<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |E0341<br /> |GROUND LUG<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |3<br /> |-<br /> |10<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |11<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |''2 per Mounting Rail''<br /> |5<br /> |-<br /> |12<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |''2 per Mounting Rail''<br /> |5<br /> |-<br /> |13<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |''2 per Mounting Rail''<br /> |5<br /> |-<br /> |14<br /> |00196404<br /> |LABEL-DANGER<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Water Cart&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Water Cart.png|alt=BE-TS Water Cart|frameless|549x549px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PB0033<br /> |OVERFILL INDICATOR<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |PB0034<br /> |LOCKNUT-CONDUIT-2&quot;-NYLON<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0308<br /> |FILLER/BREATHER ASSEMBLY<br /> |<br /> |Includes gaskets<br /> |1<br /> |-<br /> |4<br /> |HW0209<br /> |SCREW-RHMS-10-32 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |5<br /> |550-057<br /> |HOSE-FILL-3/4&quot; X 15'<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |550-027<br /> |ON/OFF VALVE<br /> |<br /> |''(Not shown)''<br /> |1<br /> |-<br /> |7<br /> |PB0902<br /> |HOSE-3/4&quot;<br /> |<br /> |<br /> |30&quot;<br /> |-<br /> |8<br /> |HW1018<br /> |HOSE CLAMP-3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |PB0603<br /> |ADAPTER-3/4&quot; NPT X 3/4&quot; BARB<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |PB0456<br /> |ELBOW-STR-90 DEG-3/4&quot; NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |PB0451<br /> |ADAPTER-3/4&quot; NPT X 3/4 GHT<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |PB0302<br /> |PLUG-3/4&quot; NPT<br /> |<br /> |<br /> |<br /> |-<br /> |13<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |14<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |SS0106<br /> |SHCS-#10-24 X 1/2&quot;-SST<br /> |<br /> |<br /> |6<br /> |-<br /> |16<br /> |SS0114<br /> |BHSCS-#10-24 X 1/2&quot; SST<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |SS0301<br /> |WASHER-FLAT-#10-SAE-SST<br /> |<br /> |<br /> |10<br /> |-<br /> |18<br /> |00196701<br /> |DECAL-BHS-12&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |00196404<br /> |LABEL-DANGER-&quot;120 VOLTS&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |20<br /> |00166648<br /> |LABEL, NON-POTABLE<br /> |<br /> |<br /> |1<br /> |-<br /> |21<br /> |HW0418<br /> |BOLT-HHCS-3/8-16 X 2-1/4&quot;<br /> |<br /> | rowspan=&quot;3&quot; |''Mounting bolts'' <br /> <br /> ''(Not shown)''<br /> |2<br /> |-<br /> |22<br /> |HW0031<br /> |NUT-HEX-3/8-16 CENTERLOCK<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |2<br /> |}<br /> [[File:BE-TS Water Cart 2.png|alt=BE-TS Water Cart|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1511<br /> |SWITCH-ROCKER<br /> |<br /> |Submersible rated<br /> |1<br /> |-<br /> |2<br /> |E0378<br /> |INDICATOR LIGHT-120VAC-GREEN<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |3<br /> |E0376<br /> |INDICATOR LIGHT-120VAC-AMBER<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |4<br /> |E0377<br /> |INDICATOR LIGHT-120VAC-RED<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |5<br /> |46917015<br /> |PLACARD-INDICATOR LIGHT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0505<br /> |16-3 SO CORD<br /> |<br /> |<br /> |72&quot;<br /> |-<br /> |7<br /> |E0653<br /> |PLUG-120V/15A<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |9<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |PL0501<br /> |GROMMET-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |E1313<br /> |SOCKET-RELAY-8 PIN<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |E0331<br /> |RELAY-DPDT-110VAC<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |E0440<br /> |TERMINAL BLOCK-8 POLE<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |E1070<br /> |GROUND BAR-4 POSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |HW0139<br /> |SCREW-RHMS-#8-32 X 1 1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |HW0135<br /> |SCREW-RHMS-#8-32 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW1061<br /> |SCREW-RHMS-#8-32 X 1&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |5<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Water carts built prior to October 2021 used Multi-Piece Indicator Lights with Replaceable Bulb and Lens and are no longer available. Current Indicator Lights are a 1-Piece LED Assemblly.'' <br /> <br /> ''Replacement of any Mutli-Piece component requires replacing entire assembly with current 1-Piece Indicator Light.'' <br /> |}<br /> <br /> = &lt;big&gt;Service &amp; Maintenance&lt;/big&gt; =<br /> <br /> == &lt;big&gt;Daily Inspection List&lt;/big&gt; ==<br /> The points listed below should be visually inspected daily prior to initial start up of the Battery Extractor to ensure safe and proper operation of the unit and to help avoid unnecessary down time.<br /> <br /> # Walk around unit and inspect for any physical damage to machine not previously noted.<br /> # Verify all guards are in place.<br /> # Inspect the AC power feed for any damage.<br /> # Vacuum equipped units: Inspect vacuum cups for damage to cup sealing surface, backup casting, and vacuum hoses. Magnet equipped units: Inspect magnets for damage to attachment face, proximity sensor cover, cables and connections.<br /> # Inspect travel path and area around unit for any hydraulic oil that could be a potential repair/maintenance issue and/or safety hazard.<br /> # Check oil level in hydraulic reservoir at fill level gauge.<br /> # Check that operator safety gate and all safety switches are in proper working order.<br /> # Verify extractor path is free of obstructions.<br /> # Check roller beds for any debris and clean as required.<br /> # Board unit, engage system and verify all functions are operating properly and that no abnormal or unusual noises are present.<br /> <br /> ''* Use form IF-5008 when preforming daily inspections''<br /> <br /> == &lt;big&gt;Operator's Daily Checklist&lt;/big&gt; ==<br /> [[File:BE-TS Operator's Daily Checklist.png|alt=BE-TS Operator's Daily Checklist|frameless|1180x1180px]]<br /> <br /> == &lt;big&gt;Recommended Battery Extractor Lubrication Intervals&lt;/big&gt; ==<br /> {| class=&quot;wikitable&quot;<br /> !Lubrication Task<br /> !'''# of Places'''<br /> !Intervals<br /> |-<br /> |'''1. Lubricate grease fittings using #2 lithium based grease'''<br /> |<br /> |<br /> |-<br /> |A. Extractor arm drive nut and carrier bearings<br /> |5 places<br /> |50 hrs / Weekly<br /> |-<br /> |B. Idler casters<br /> |2 places<br /> |200 hrs / Weekly<br /> |-<br /> |'''2. Wipe off and lubricate chains using light machine oil'''<br /> |<br /> |<br /> |-<br /> |A. #80 Lift chains (Not applicable to BE-SL units)<br /> |4 places<br /> |200 hrs / Monthly<br /> |-<br /> |B. #60 Equalization chains<br /> |4 places<br /> |200 hrs / Monthly<br /> |-<br /> |C. #35 Powered roller chains<br /> |8 places<br /> |200 hrs / Monthly<br /> |-<br /> |'''3. Change return line hydraulic fluid filter'''<br /> ''(Oil filtration of at least 20 microns is recommended)''<br /> |1 place<br /> |300 hrs / Twice Quarterly<br /> |-<br /> |'''4. Change hydraulic fluid'''<br /> | -<br /> |600 hrs / Quarterly *<br /> |-<br /> |'''5. Complete preventative maintenance (PM)'''<br /> Use form IF-5029 for Vacuum equipped units.<br /> <br /> Use form IF-5028 for Magnet equipped units.<br /> | -<br /> |600 hrs / Quarterly<br /> |-<br /> ! colspan=&quot;3&quot; |NOTES<br /> |-<br /> | colspan=&quot;3&quot; |''These recommendations are based on average use in a typical warehouse environment and may be adjusted based on specific circumstances. Dusty and/or extreme hot/cold environments may require more frequent lubrication.''<br /> |-<br /> | colspan=&quot;3&quot; |''* BHS recommends implementing an oil sampling and analysis program to monitor hydraulic fluid condition and determine when hydraulic fluid changes are required. The fluid analysis program should be a continuous process and all results should be evaluated. Changes in the condition of the hydraulic system may indicate component wear, fluid deterioration and/or contamination.''<br /> |}<br /> {|<br /> |[[File:NOTICE-warn.png|alt=NOTICE|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:NOTICE-warn.png]]<br /> |<br /> *'''The mounted bearings used on the power rollers, equalization shafts, drive wheels, and drive screw are sealed and shielded bearings. Lubrication may breach the seals of these bearings, therefore these bearings should not be lubricated unless the machine has been cleaned with a high pressure wash on a regular basis (not recommended).'''<br /> *'''Hydraulic fluid should not exceed 140°F (60°C) for extended periods.'''<br /> |}<br /> ===&lt;big&gt;'''&lt;u&gt;Reservoir Capacities ''(APPROX.)''&lt;/u&gt;'''&lt;/big&gt;===<br /> {|<br /> |BE-SL<br /> |18 gal (68 L)<br /> |-<br /> |BE-DS<br /> |18 gal (68 L)<br /> |-<br /> | rowspan=&quot;2&quot; |BE-TS<br /> |30 gal (114 L) ''(Units built Pre-2014)''<br /> |-<br /> |45 gal (170 L) ''(Units built 2014 to Present)''<br /> |-<br /> |BE-QS<br /> |60 gal (227 L)<br /> |}The reservoir should be filled so fluid level is within a half inch (1/2&quot;) of the top of sight glass. Use Chevron AW 68 or equivalent ISO 68 grade hydraulic oil with anti-wear additives and foam suppressant.<br /> <br /> '''''NOTE'':''' Some units shipped from the factory with AW 32 oil for cold environment operation. Units using AW 32 from the factory may experience poor performance if AW 68 is used instead of AW 32 due to the increased viscosity of the oil.<br /> <br /> ==&lt;big&gt;Preventative Maintenance Reports&lt;/big&gt;==<br /> ===&lt;big&gt;&lt;u&gt;Vacuum Extraction&lt;/u&gt;&lt;/big&gt;===<br /> [[File:Battery Extractor Series - Vacuum Extraction Planned Maintenance Inspection Report Page 1.png|alt=Battery Extractor Series - Vacuum Extraction Planned Maintenance Inspection Report Page1|frameless|1238x1238px|link=https://tech.bhs1.com/index.php/File:Battery_Extractor_Series_-_Vacuum_Extraction_Planned_Maintenance_Inspection_Report_Page_1.png]]<br /> <br /> [[File:Battery Extractor Series - Vacuum Extraction Planned Maintenance Inspection Report page2.png|alt=Battery Extractor Series - Vacuum Extraction Planned Maintenance Inspection Report Page 2|frameless|1230x1230px|link=https://tech.bhs1.com/index.php/File:Battery_Extractor_Series_-_Vacuum_Extraction_Planned_Maintenance_Inspection_Report_page2.png]]<br /> ===&lt;big&gt;&lt;u&gt;Magnet Extraction&lt;/u&gt;&lt;/big&gt;===<br /> [[File:Battery Extractor Series - Magnet Extraction Planned Maintenance Inspection Report Page 1.png|alt=Battery Extractor Series - Magnet Extraction Planned Maintenance Inspection Report Page 1|frameless|1224x1224px|link=https://tech.bhs1.com/index.php/File:Battery_Extractor_Series_-_Magnet_Extraction_Planned_Maintenance_Inspection_Report_Page_1.png]]<br /> <br /> [[File:Battery Extractor Series - Magnet Extraction Planned Maintenance Inspection Report Page 2.png|alt=Battery Extractor Series - Magnet Extraction Planned Maintenance Inspection Report Page 2|frameless|1233x1233px|link=https://tech.bhs1.com/index.php/File:Battery_Extractor_Series_-_Magnet_Extraction_Planned_Maintenance_Inspection_Report_Page_2.png]]<br /> <br /> ==&lt;big&gt;80292002-i – Equalization Chain Installation / Resetting Procedure&lt;/big&gt;==<br /> ===&lt;big&gt;&lt;u&gt;Required Tools&lt;/u&gt;&lt;/big&gt;===<br /> *Large standard screwdriver<br /> *1/8&quot;, 5/32&quot;, 3/16&quot; Allen wrench<br /> *(2) 1-1/8&quot; Open-end wrenches<br /> *Needle nose pliers<br /> *6&quot; Steel scale (ruler)<br /> *Brake cleaner (non-chlorinated)<br /> *Loctite #242 (blue)<br /> *80292002 - E.Q. Adjustment stop kit (SL, DS, TS) or 80492001 - BE-QS E.Q. Adjustment stop kit<br /> *Ladder or work platform ''(see notes)''<br /> ===&lt;big&gt;&lt;u&gt;''Optional Tools''&lt;/u&gt;&lt;/big&gt;===<br /> *Wire brush for removing Loctite from components prior to reassembly<br /> ===&lt;big&gt;&lt;u&gt;Notes&lt;/u&gt;&lt;/big&gt;===<br /> *''A ladder, man lift or other device is required to access the upper E.Q. studs on BE-TS and BE-QS units.''<br /> *''The following procedures must be performed with the extractor unloaded and in a level area of the travel path.''<br /> *''Installation of the E.Q. stop kit requires (4) persons plus a trained battery extractor operator to raise and lower the inner carriage.''<br /> *''It is recommended to have new E.Q. chain connecting links on hand prior to performing the following procedures.''<br /> *''The upper E.Q. stud lock washers cannot be reused and must be replaced prior to reassembly.''<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Page 369 Image 0001.png|alt=BE-TS with EQ Adjustment Stops Installed|none|thumb|300x300px|BE-TS with EQ Adjustment Stops Installed|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Page_369_Image_0001.png]]<br /> ===&lt;big&gt;&lt;u&gt;IMPORTANT&lt;/u&gt;&lt;/big&gt;===<br /> *'''Read and understand the Safety and De-energization Procedure TP-606 before starting this procedure.'''<br /> *'''Read and understand these instructions completely before starting this procedure.'''<br /> ===&lt;big&gt;&lt;u&gt;Procedure&lt;/u&gt;&lt;/big&gt;===<br /> 1. Remove the inner and outer frame guards to access the lower equalization studs.<br /> <br /> 2. Raise the inner frame approximately 30&quot; (762 mm) for SL, DS and TS units or 50&quot; (1270 mm) for QS units from the fully lowered position. Install (1) adjustment stop at each corner of the roller bed. See Figure 1.[[File:IOP-400 BE-SL&amp;DS (10-23) EQ Chain Instructions-Figure1.png|alt=|none|thumb|375x375px|FIGURE 1|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_EQ_Chain_Instructions-Figure1.png]]3. Slowly lower the inner carriage until the roller bed is firmly and securely seated against all four stops. See Figure 2.[[File:IOP-400 BE-SL&amp;DS (10-23) Page 370 Image 0002.png|alt=Roller bed firmly seated against all four stops|none|thumb|398x398px|FIGURE 2|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Page_370_Image_0002.png]]4. Lockout/tagout the B.E. per your corporate policy.<br /> <br /> 5. De-energize the B.E. per BHS Safety and De-energization procedure TP-606.<br /> <br /> 6. Loosen and remove the upper hex nuts and remove the upper chain studs. Remove the lock washers from the upper chain studs. Save the hex nuts for reassembly later. Discard the lock washers and obtain new, 3/4&quot; split-ring lock washers for reassembly.<br /> <br /> 7. If replacing the chain, remove the upper stud and remove the chain from the lower stud. Discard the connecting links.<br /> *''If the E.Q. chains are being reset due to a connecting link failure, it is recommended to also replace the stud where the connecting link failed.''<br /> *''It is recommended to replace the connecting links when replacing or resetting the E.Q. chains.''<br /> 8. If replacing a lower stud, remove the connecting link and disconnect the chain. Loosen the hex nut and remove the stud. Remove the hex nut from the old stud and reinstall it on the new stud. Reinstall the new stud so that it is flush with the bottom of the frame and the hole is aligned front-to-back with the extractor.<br /> <br /> 9. Attach the chains to the lower studs using the connecting links. Attach the upper studs to the chains using the connecting links, making sure the nut is threaded down near the connecting link and lay the chains in the frame. See Figure 3.<br /> *''Do not fully assemble the lower connecting links by bending the cotter pins as the connecting link may need to be removed later for stud adjustment.''[[File:IOP-400 BE-SL&amp;DS (10-23) EQ Chain Attached to Upper Stud.png|alt=BE-TS Chain Attached to Upper Stud|none|thumb|300x300px|FIGURE 3|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_EQ_Chain_Attached_to_Upper_Stud.png]]<br /> 10. If new E.Q. sprockets are to be installed, remove the clamp collars and old sprockets. Install the new sprockets and reinstall the clamp collars. DO NOT tighten the set screws at this point as adjustment/alignment may be required.<br /> *''Sprockets MUST be keyed in-line.''<br /> 11. Align the E.Q. shafts so that the keyways are in the 2 o'clock position (approximately 60 degrees from vertical). This will bring the sprocket set screws to the top of the sprocket when the inner carriage is lowered. See Figure 4.[[File:IOP-400 BE-SL&amp;DS (10-23) EQ Shafts aligned 60 Degrees from Vertical.png|alt=BE-TS EQ Shafts aligned 60 Degrees from Vertical|none|thumb|300x300px|FIGURE 4|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_EQ_Shafts_aligned_60_Degrees_from_Vertical.png]]12. Starting with the inside chain, route the chain over the sprocket directly above the lower stud and under the inside sprocket on the opposite shaft. Attach the upper stud to the top cross bar, making sure a new 3/4&quot; split -ring lock washer is installed between the cross bar and lower hex nut. Hand tighten the upper stud adjusting nut to remove slack from the chain. See Figure 5.<br /> <br /> 13. Route the outer chain over the sprocket, above the stud and under the sprocket on the opposite shaft. Attach the upper stud to the top cross bar, making sure a new, 3/4&quot; split-ring lock washer is installed between the cross bar and lower hex nut. Hand tighten the upper stud adjusting nut to remove slack from the chain. See Figure 5.<br /> *''It is recommended to begin at the operator end where room is limited allowing easier access at the opposite end to route the chain under the final sprocket.''<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Inside and Outside EQ Chains.png|alt=BE-TS Inside and Outside EQ Chains|none|thumb|499x499px|FIGURE 5|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Inside_and_Outside_EQ_Chains.png]]14. Repeat steps 11 through 13 for the opposite side of the extractor. It is likely that a large, standard screwdriver will be necessary to position the final chain over the sprocket. See Figure 6.[[File:IOP-400 BE-SL&amp;DS (10-23) Page 371 Image 0002.png|alt=It is likely that a large, standard screwdriver will be necessary to position the final chain over the sprocket.|none|thumb|300x300px|FIGURE 6|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Page_371_Image_0002.png]]15. Adjust the lower studs up or down as necessary to take the slack out of the chain between the lower studs and the sprockets by removing the connecting link from the stud and turning the stud. Tighten the hex nuts against the frame once the studs have been adjusted. Reattach the chain.<br /> *DO NOT allow the stud to twist when tightening the hex nuts.<br /> 16. Tighten the upper hex nut on the upper studs until there is approximately 1/4&quot; (7 mm) of total deflection in the middle of the upper, vertical chain sections. Tighten the lower hex nuts on the upper studs to lock the studs in place.<br /> *''Each section of chain between the sprockets should have approximately the same tension as the other on the same side. See Figure 5.''<br /> 17. Raise the inner frame and remove the adjustment stops from the four corners and lower the inside frame.<br /> <br /> 18. Verify equalization sprocket and stud alignment by using a 6&quot; scale. Measure the distance from the inside roller bed frame to the center of the equalization stud. Compare this distance with the measurements from the inside roller bed frame to the center-lines of the sprockets. Adjust the position of the sprocket as necessary to make the distances equal. This will ensure the chain and sprockets are in line with the stud. Repeat this process for the three remaining chains. See Figures 7 &amp; 8.<br /> <br /> 19. Raise and lower the inner frame several times and listen for any chain popping noises to confirm the sprockets are in line with the lower studs. If there is no popping noise, lower the inner frame all the way down.[[File:IOP-400 BE-SL&amp;DS (10-23) EQ Chain Verify equalization sprocket and stud alignment by using a 6in scale-Fig7.png|alt=BE-TS EQ Chain Procedure Figure 7 - Verify equalization sprocket and stud alignment by using a 6&quot; scale|none|thumb|300x300px|FIGURE 7|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_EQ_Chain_Verify_equalization_sprocket_and_stud_alignment_by_using_a_6in_scale-Fig7.png]][[File:IOP-400 BE-SL&amp;DS (10-23) EQ Chain Verify equalization sprocket and stud alignment by using a 6in scale-Fig8.png|alt=BE-TS EQ Chain Verify equalization sprocket and stud alignment by using a 6in scale - Fig 8|none|thumb|300x300px|FIGURE 8|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_EQ_Chain_Verify_equalization_sprocket_and_stud_alignment_by_using_a_6in_scale-Fig8.png]]20. Clean any existing, hardened Loctite from the sprockets, sprocket sets screws, clamp collars and clamp collar bolts.<br /> <br /> 21. Apply Loctite to and tighten the set screws on the sprockets. Slide the clamp collars against the outside sprocket, loctite and tighten the clamp collars.<br /> ==&lt;big&gt;80292001-i – Battery Extractor Service Stand Installation Instructions&lt;/big&gt;==<br /> ===&lt;big&gt;&lt;u&gt;Required Tools&lt;/u&gt;&lt;/big&gt;===<br /> None<br /> ===&lt;big&gt;&lt;u&gt;Notes&lt;/u&gt;&lt;/big&gt;===<br /> *''Refer to kit part # 80292001 or 80392001 for the complete bill of materials supplied.''<br /> *''Remove ALL batteries from extractor prior to installation / service.''<br /> *''Installation of service stands requires (2) persons plus a trained battery extractor operator to raise and lower the inner carriage. DO NOT attempt installation with less than (3) persons.''<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Single Level Service Stand Properly Installed.png|alt=Single Level Service Stand Properly Installed|none|thumb|368x368px|Single Level Service Stand Properly Installed|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Single_Level_Service_Stand_Properly_Installed.png]]<br /> ===&lt;big&gt;&lt;u&gt;IMPORTANT&lt;/u&gt;&lt;/big&gt;===<br /> *'''Read and understand the Safety and De-energization Procedure TP-606 before starting this procedure.'''<br /> *'''Read and understand these instructions completely before starting this procedure.'''<br /> ===&lt;big&gt;&lt;u&gt;Procedure&lt;/u&gt;&lt;/big&gt;===<br /> 1. Have a qualified operator raise the inner carriage of the extractor to the required height for installation. For single level applications, the required height will be approximately 25&quot; (64 cm) from the fully lowered position. For double, triple, and quad stack machines, the required height will be approximately 55&quot; (140 cm) from the fully lowered position.<br /> *On double, triple, and quad stack battery extractors, the operator either must remain on the operator platform during service or be provided an OSHA approved method of egress. This is not applicable to single level battery extractors as the operator platform height is fixed.<br /> 2. Install the stands by engaging the top of the stand into the inner carriage cutouts. Place the bottom channel of the stand over the tube of the outer frame. The top flanges of each stand are tapered to aid in proper alignment of the stand with the inner frame.<br /> <br /> See Figures 1 &amp; 2.[[File:IOP-400 BE-SL&amp;DS (10-23) engaging the top of the stand into the inner carriage cutout.png|alt=Properly seated in cutout|none|thumb|300x300px|FIGURE 1|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_engaging_the_top_of_the_stand_into_the_inner_carriage_cutout.png]][[File:IOP-400 BE-SL&amp;DS (10-23) Page 374 Image 0005.png|none|thumb|300x300px|FIGURE 2|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Page_374_Image_0005.png]]3. Once BOTH stands have been properly placed, SLOWLY lower the inner carriage while the stands are held in place.<br /> <br /> 4. Once the inner carriage is firmly seated on the service stands, verify the stands are securely installed. See Figure 3.[[File:IOP-400 BE-SL&amp;DS (10-23) Page 374 Image 0006.png|none|thumb|450x450px|FIGURE 3|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Page_374_Image_0006.png]]<br /> ==&lt;big&gt;Trouble Shooting Guide&lt;/big&gt;==<br /> {| class=&quot;wikitable&quot;<br /> !Problem Symptom<br /> !Probable Cause<br /> !Solution<br /> |-<br /> |Hydraulic power Unit does not operate.<br /> No electric to power unit motor.<br /> |1. No AC power to Unit.<br /> 2. Reset on magnetic motor starter tripped.<br /> <br /> 3. Gate switch not actuated.<br /> <br /> 4. Foot Pedal switch not engaged.<br /> <br /> 5. Emergency Stop switch is depressed.<br /> |1. Check fuses or breaker.<br /> 2. Check reset button.<br /> <br /> 3. Make sure safety gate is engaging switch.<br /> <br /> 4. Check foot pedal for obstruction.<br /> <br /> 5. Reset button using machine key.<br /> |-<br /> |Power unit runs but no pressure reading at gauge,<br /> also no functions move.<br /> |1. AC input is in reverse phase. Motor is running backwards.<br /> 2. Main system relief valve stuck open or defective.<br /> <br /> 3. Coupling between motor and pump loose.<br /> |1. Reverse any two of the three hot lines to unit.<br /> 2. Check relief valve cartridge for trash or debris.<br /> <br /> Replace as required.<br /> <br /> 3. Inspect coupling assy.<br /> |-<br /> |Magnetic starter contact chatters-at startup.<br /> Contact chatters while traveling.<br /> |1. 1 leg of 3 phase input power out.<br /> 2. Safety gate and/or gate switch out of adjustment.<br /> |1. Check fuse or circuit breaker at service panel.<br /> 2. Check and adjust gate or switch as required to<br /> <br /> ensure full engagement of plunger on gate<br /> <br /> switch and that the safety gate is not bouncing<br /> <br /> due to vibration.<br /> |-<br /> |No floor travel empty or loaded-all other functions work properly.<br /> |1. Extractor arm off center-left to right.<br /> 2. Proximity switch or sensing bracket out of target range.<br /> <br /> 3. Proximity switch defective or broken.<br /> <br /> 4. Bad solenoid coil on floor cutout valve.<br /> <br /> 5. Spool on floor cutout valve stuck open.<br /> |1. Center arm.<br /> 2. Adjust as needed to achieve 1/4” clearance.<br /> <br /> 3. Check switch and replace.<br /> <br /> 4. Check solenoid and replace if needed.<br /> <br /> 5. Remove and clean spool cartridge or replace.<br /> |-<br /> |Floor travel moves but is sluggish<br /> and stalls with a load at certain points.<br /> |1. Uneven floor conditions. High/low spots.<br /> 2. Excessive tire wear.<br /> <br /> 3. Wheel shaft-to-motor shaft coupling on drive wheel assembly loose or broken.<br /> <br /> 4. Debris lodged under battery extractor.<br /> |1. Check flatness of floor. Check guidance track for scraping of guide arm on top of angle.<br /> 2. Measure under clearance of battery extractor. Should be no less than 5/8” replace poly wheels as needed.<br /> <br /> 3. Inspect drive assembly while under load to see if shafts and couplings are moving in unison. Repair as needed.<br /> <br /> 4. Inspect under unit and remove debris.<br /> |-<br /> |Inner carriage bounces while lifting under load,<br /> but not when empty.<br /> |1. Down speed adjustment valve open too far.<br /> |1. Adjust as needed to eliminate carriage bounce.<br /> |-<br /> |Inner carriage does not lift evenly.<br /> Four corners do not land evenly against outer frame tube.<br /> |1. Equalization chains are out of adjustment.<br /> 2. Excessive chain or sprocket wear.<br /> <br /> 3. Equalization chains are out of synchronization. Possibly may have jumped a sprocket tooth.<br /> <br /> 4. Broken bearing housing on mounted shaft.<br /> <br /> 5. Lift cylinder roping chains out of adjustment.<br /> |1. Readjust with the top stud until equal tension is achieved.<br /> 2. Replace as needed.<br /> <br /> 3. Evaluate and resynchronize as required.<br /> <br /> 4. Inspect and replace.<br /> <br /> 5. Readjust as needed to equal tension on all four cylinders in full down position.<br /> |}<br /> =&lt;big&gt;Aftermarket Support&lt;/big&gt;=<br /> [https://na.bhs1.com/blog/post/tt-922-technical-support Click here] for details on BHS' Aftermarket Support.<br /> =&lt;big&gt;Statement of Warranty&lt;/big&gt;=<br /> [https://store.bhs1.com/warranty Click here] for details on BHS' Statement of Warranty.</div>

Kperrier https://tech.bhs1.com/index.php?title=(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)&diff=7661 2024-03-13T20:59:43Z

<p>Kperrier: Added links within document</p> <hr /> <div>'''Looking for a specific replacement part?''' Ctrl-F (or Command-F for Mac users) brings up your browsers search panel and can search any text on the entire web page. Find parts by searching a part # or part description.<br /> <br /> '''Register your equipment with [https://na.bhs1.com/media-library/bhs-optima/ BHS Optima], BHS's free app.'''<br /> <br /> '''California Residents''': WARNING: This product contains chemicals known to the State of California to cause cancer and/or reproductive harm, and birth defects or other reproductive harm. [https://na.bhs1.com/about-bhs/compliance-statement-for-california-proposition-65/ Learn more here.]<br /> =&lt;big&gt;Preface&lt;/big&gt;=<br /> =&lt;big&gt;TP-606 – Safety &amp; De-Energization Procedures&lt;/big&gt;=<br /> ==&lt;big&gt;General Safety&lt;/big&gt;==<br /> {|<br /> |[[File:Read Before Operating Notice.png|alt=Read Before Operating|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:Read_Before_Operating_Notice.png]]<br /> |<br /> *Read and understand all instructions and warnings before using or servicing this equipment.<br /> *Keep these instructions for future reference.<br /> |}<br /> *Battery Extractor (BE) units shall only be operated by suitable persons of at least 18 years of age, who have been trained in the proper and safe operation of the BE and expressly certified/charged, in writing, by the user or their representative.<br /> *Only one person is permitted to travel on the BE at any time.<br /> *BE units shall only be used indoors in an industrial setting on a hard, nonslip, and level floor without defects including but not limited to holes, gouges, cracks, drains or obstacles comprised of concrete or other suitable industrial material meeting the minimum requirements specified by BHS as well as any local requirements.<br /> *A licensed structural engineer should be consulted prior to installing a BE on any building level other than the ground floor.<br /> *BE units are not designed to be shipped or transported after initial delivery.<br /> *Failure to follow these instructions and warnings may result in property damage, personal injury or death.<br /> ===&lt;big&gt;&lt;u&gt;Work Area&lt;/u&gt;&lt;/big&gt;===<br /> *Keep work area clean and well lit. Cluttered work areas and poor lighting can lead to accidents.<br /> *Clean up/contain any fluid spills immediately to prevent slips or falls.<br /> *Be aware of potential hazards when performing any service or maintenance to the unit.<br /> ===&lt;big&gt;&lt;u&gt;Service &amp; Maintenance&lt;/u&gt;&lt;/big&gt;===<br /> Service personnel shall wear Personal Protective Equipment (PPE) appropriate for the task being performed.<br /> {|<br /> |[[File:Electrical Hazard Warning.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Electrical_Hazard_Warning.png]]<br /> [[File:Danger Warning.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Danger_Warning.png|alt=DANGER]]<br /> |<br /> ===&lt;big&gt;&lt;u&gt;Lockout/Tagout&lt;/u&gt;&lt;/big&gt;===<br /> '''Lockout/tagout the BE per your corporate policy, if damaged or not functioning properly. Lockout/tagout and de-energize all systems prior to performing any maintenance or service to unit.'''<br /> |}<br /> {|<br /> |[[File:Warning-Battery-Explosion.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Warning-Battery-Explosion.png]]<br /> [[File:Danger Warning.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Danger_Warning.png|alt=DANGER]]<br /> |<br /> ===&lt;big&gt;&lt;u&gt;Lead-Acid Battery Explosion Hazard&lt;/u&gt;&lt;/big&gt;===<br /> '''DO NOT allow open flames or sparks of any kind near a battery. Highly explosive gas is generated when charging a battery that can remain in battery cells for extended periods of time after charging is complete.'''<br /> *Always wear appropriate PPE including rubber apron, gloves, boots and full face shield when performing service or maintenance to any lead-acid batteries.<br /> *DO NOT place metal or other conductive objects on top of battery. Arcing may occur causing damage to the battery and/or serious personal injury or death.<br /> *Use only chargers matching the voltage and amperage of the battery being charged. Overcharging a battery can cause damage to the battery, charger and/or serious personal injury or death.<br /> *Turn off charger before disconnecting battery from charger. Arcing between battery and charger connectors can cause damage to the connectors and/or serious personal injury or death.<br /> |}<br /> {|<br /> |[[File:Warning-Hydrualic-Hazard.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Warning-Hydrualic-Hazard.png]]<br /> [[File:Warning.png|alt=WARNING|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Warning.png]]<br /> |<br /> ===&lt;big&gt;&lt;u&gt;Hydraulic Hazards&lt;/u&gt;&lt;/big&gt;===<br /> '''AVOID HIGH PRESSURE FLUIDS-Escaping fluid under pressure can penetrate the skin causing serious injury. Relieve pressure before disconnecting hydraulic lines. Tighten all connections before applying pressure. Keep hands and body away from pin holes which eject fluids under high pressure. Use a piece of cardboard or paper to search for leaks. DO NOT use your hand.'''<br /> <br /> '''Any fluid injected into the skin under high pressure should be considered a serious medical emergency despite an initial normal appearance of the skin. There will be a delayed onset of pain, and serious tissue damage may occur. Medical attention should be sought immediately.'''<br /> |}<br /> {|<br /> ![[File:No Pacemakers Notice.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:No_Pacemakers_Notice.png]][[File:Strong Magnet Field Hazard Warning.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Strong_Magnet_Field_Hazard_Warning.png]]<br /> [[File:Warning.png|alt=WARNING|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Warning.png]]<br /> |<br /> ===&lt;big&gt;&lt;u&gt;Electromagnet Hazard&lt;/u&gt;&lt;/big&gt;===<br /> '''Units equipped with magnetic extraction generate strong magnetic fields. Persons with pacemakers &lt;u&gt;SHOULD&lt;/u&gt;''' &lt;u&gt;'''NOT'''&lt;/u&gt; '''operate or be in close proximity to equipment during operation.'''<br /> <br /> '''Failure to comply with this direction''' '''could result in serious personal injury or death.'''<br /> |}<br /> ===&lt;big&gt;&lt;u&gt;Operational Safety&lt;/u&gt;&lt;/big&gt;===<br /> *Only personnel trained in the proper and safe operation of BE units may operate or service the BE.<br /> *Operators shall wear appropriate PPE suitable for working with industrial lead-acid batteries while operating the BE ''(See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Lead-Acid_Battery_Explosion_Hazard Lead-Acid Battery Explosion Hazard] section).''<br /> *All data plates, warning labels, placards, etc. shall be in place and legible at all times. Contact BHS for re-placement data plates, warning labels, placards or instructions.<br /> *All users and service personnel shall be familiar with the meaning and risks associated with all data plates, warning labels, etc.<br /> *All operators and service personnel shall be aware of potential crush and shear points while operating or servicing the BE.<br /> *Keep hands and arms inside the operator compartment while operating the BE.<br /> *Remove BE from service if damaged, defective, or operating improperly (or becomes such while operating) until repairs can be made to correct any problem(s).<br /> *All operators shall be aware of the location of the end stops in the travel path to prevent driving the BE into the end stops.<br /> ===&lt;u&gt;&lt;big&gt;Do's and Don'ts&lt;/big&gt;&lt;/u&gt;===<br /> *'''DO NOT''' exceed the maximum capacity of the BE.<br /> *'''DO NOT''' modify or fit the BE with attachments without prior, written approval from BHS.<br /> *'''DO NOT''' perform any maintenance or service to the BE with a battery loaded on the BE.<br /> *'''DO NOT''' allow anyone to ride in or on the BE.<br /> *'''DO NOT''' operate the BE with any guard or cover removed unless required for maintenance or repair.<br /> *Disconnect the BE from all power sources before attempting to perform service or maintenance to the unit.<br /> *'''DO NOT''' drive the BE into the end stops.<br /> *'''DO NOT''' operate the BE if disengaged from the guidance track.<br /> *'''DO NOT''' allow a battery to exit the BE when a lift truck or battery stand is not present to accept the battery.<br /> *'''DO NOT''' rotate the arm onto a battery such that any part of the extractor arm, vacuum cup or magnet contacts the top of the battery.<br /> *'''DO NOT''' allow anyone to enter the area under the carriage without the service stands properly installed.<br /> *'''DO NOT''' use the BE in a manner for which it is not intended. Some examples of prohibited use are but not limited to:<br /> **To transport people<br /> **As a vehicle jack<br /> **To lift loads greater than its rated load capacity<br /> **Where unintentional movement may exist<br /> **Having direct contact with foodstuffs<br /> **In a potentially explosive atmosphere<br /> ==&lt;big&gt;De-Energization&lt;/big&gt;==<br /> 1. Fully lower the BE roller bed or position the roller bed on service stands if service requires the bed be raised. See Figures 1 &amp; 2.<br /> {|<br /> |[[File:WARNING-warn.png|alt=WARNING|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:WARNING-warn.png]]<br /> !Failure to properly support the roller bed when performing service under the BE could result in injury from the roller bed lowering unexpectedly.<br /> |}[[File:IOP-400 BE-SL&amp;DS (10-23) Fully Lower BE Roller Bed.png|alt=Fully lowered BE roller bed|none|thumb|FIGURE 1|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Fully_Lower_BE_Roller_Bed.png]][[File:IOP-400 BE-SL&amp;DS (10-23) BE Roller Bed on Service Stands .png|alt=Raised BE roller bed positioned on service stands|none|thumb|FIGURE 2|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_BE_Roller_Bed_on_Service_Stands_.png]]2. Turn key on dashboard to the “OFF” position. See Figure 3.[[File:IOP-400 BE-SL&amp;DS (10-23) De-Energization Figure 3.png|alt=Key on BE dashboard turned to the “OFF” position.|none|thumb|FIGURE 3|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_De-Energization_Figure_3.png]]3. Disconnect power to the extractor or shut off the electrical branch circuit breaker.<br /> {|<br /> |[[File:Danger Warning.png|alt=DANGER|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Danger_Warning.png]]<br /> |'''Failure to disconnect electrical power to the BE could result in electrical shock. Serious personal injury or death will occur.'''<br /> |}4. Actuate all hydraulic levers in both directions to re-lease any stored hydraulic pressure. See Figure 4.<br /> {|<br /> |[[File:WARNING-warn.png|alt=WARNING|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:WARNING-warn.png]]<br /> |'''Failure to release any stored hydraulic pres-sure could result in injury from:'''<br /> *'''Escaping hydraulic fluid under high pressure (see ''[https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Hydraulic_Hazards HYDRAULIC HAZARDS]'' in the ''[https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#General_Safety GENERAL SAFETY]'' section).'''<br /> *'''Unexpected movement of hydraulic components.'''<br /> |}[[File:IOP-400 BE-SL&amp;DS (10-23) Actuate all Hydraulic Levers in Both Directions.png|alt=Actuate all hydraulic levers in both directions to release any stored hydraulic pressure.|none|thumb|FIGURE 4|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Actuate_all_Hydraulic_Levers_in_Both_Directions.png]]<br /> ==&lt;big&gt;Labels &amp; Placards&lt;/big&gt;==<br /> '''Operators should be familiar with the meaning of the following labels and placards found on the BE to ensure proper and safe operation.'''<br /> {| class=&quot;wikitable&quot;<br /> |-<br /> ![[File:Read Before Operating Notice.png|alt=Read Before Operating|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Read_Before_Operating_Notice.png]]<br /> |'''Read and understand instruction manual prior to use.'''<br /> |-<br /> ![[File:Lockout-Before-Servicing-Notice.png|alt=Lockout Before Servicing Unit|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Lockout-Before-Servicing-Notice.png]]<br /> |'''Lockout before servicing.'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Extractor Arm Positioning Arrows.png|alt=BE-SL &amp; BE-DS Extractor Arm Positioning Arrows|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Extractor_Arm_Positioning_Arrows.png]]<br /> |'''Extractor arm positioning arrows'''<br /> |-<br /> ![[File:Do Not Operate Without Guards or Covers Notice.png|alt=DO NOT Operate Without Guards or Covers Notice|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Do_Not_Operate_Without_Guards_or_Covers_Notice.png]]<br /> |'''DO NOT operate with guards or covers removed'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) No Riders Allowed.png|alt=No riders allowed|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_No_Riders_Allowed.png]]<br /> |'''NO riders allowed.'''<br /> |-<br /> ![[File:No Pacemakers Notice.png|alt=DO NOT operate by or in close proximity to people with pacemakers.|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:No_Pacemakers_Notice.png]]<br /> |'''DO NOT operate by or in close proximity to people with pacemakers.'''<br /> |-<br /> ![[File:Strong Magnet Field Hazard Warning.png|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Strong_Magnet_Field_Hazard_Warning.png]]<br /> [[File:Warning.png|alt=WARNING|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Warning.png]]<br /> |'''Strong Magnet Field Hazard'''<br /> *Attraction between magnet and metallic objects can crush.<br /> *Keep unsecured metallic objects away from magnet.<br /> *De-energize and lockout/tagout before servicing.<br /> |-<br /> ![[File:Chain Entanglement Hazard Warning.png|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Chain_Entanglement_Hazard_Warning.png]]<br /> [[File:Warning.png|alt=WARNING|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Warning.png]]<br /> |'''Chain Entanglement Hazard'''<br /> *Moving chains and sprockets can crush and cut.<br /> *Keep hands and fingers clear. Do not operate with guards removed.<br /> *De-energize and lockout/tagout before servicing.<br /> |-<br /> ![[File:Electrical Hazard Warning.png|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Electrical_Hazard_Warning.png]]<br /> [[File:Danger Warning.png|alt=DANGER|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Danger_Warning.png]]<br /> |'''Electrical Hazard'''<br /> *Energized components can cause electrical shock.<br /> *De-energize and lockout/tagout before servicing.<br /> |-<br /> ![[File:BE-SL and BE-DS Power Off-On.png|alt=BE-SL and BE-DS Power Off-On|frameless|180x180px|link=https://tech.bhs1.com/index.php/File:BE-SL_and_BE-DS_Power_Off-On.png]]<br /> |'''Power Off/On'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Horn Control.png|alt=BE-SL and BE-DS Horn Control |frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Horn_Control.png]]<br /> |'''Horn (If equipped)'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Vacuum Control.png|alt=BE-SL and BE-DS Vacuum Control |frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Vacuum_Control.png]]<br /> |'''Vacuum Off/On (If equipped)'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Magnet Extraction.png|alt=BE-SL and BE-DS Magnet Off/On|frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Magnet_Extraction.png]]<br /> |'''Magnet Off/On (If equipped)'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Powered Roller Cut Off Override.png|alt=BE-SL and BE-DS Powered Roller Cut Off Override|frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Powered_Roller_Cut_Off_Override.png]]<br /> |'''Powered Roller Cutout Override (If equipped)'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Rack-Level-Assist.png|alt=BE-SL and BE-DS Rack Level Assist |frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Rack-Level-Assist.png]]<br /> |'''Rack Level Assist Indicator (If equipped)'''<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> ! rowspan=&quot;3&quot; |[[File:IOP-400_BE-SL&amp;DS_(10-23)_Power_Rollers_and_Arm_Travel.png.png|alt=BE-SL &amp; DS Powered Roller and Arm Travel Controls|frameless|504x504px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Power_Rollers_and_Arm_Travel.png.png]]<br /> |'''Far Power Rollers'''<br /> |-<br /> |'''Arm Travel'''<br /> |-<br /> |'''Near Power Rollers'''<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> |+''BE-SL &amp; DS UNITS ONLY''<br /> ! colspan=&quot;3&quot; |[[File:IOP-400 BE-SL&amp;DS (10-23) BE-SL&amp;DS Units Platform Controls.png|alt=BE-SL &amp; DS Specific Controls|frameless|460x460px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_BE-SL&amp;DS_Units_Platform_Controls.png]]<br /> |-<br /> |Drive Forward/Reverse<br /> |Platform Raise/Lower<br /> |Arm Rotation Near/Far<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> |+''BE-TS &amp; QS UNITS ONLY''<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) BE-TS &amp; BE-QS Platform Raise and Lower Controls.png|alt=BE-TS &amp; BE-QS Platform Raise and Lower Controls|frameless|240x240px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_BE-TS_&amp;_BE-QS_Platform_Raise_and_Lower_Controls.png]]<br /> ! colspan=&quot;2&quot; |[[File:IOP-400 BE-SL&amp;DS (10-23)BE-TS &amp; BE-QS Specific Controls.png|alt=BE-TS &amp; BE-QS Specific-Controls|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)BE-TS_&amp;_BE-QS_Specific_Controls.png]]<br /> |-<br /> |Platform Raise/Lower<br /> |Drive Foward/Reverse<br /> |Arm Rotation Near/Far<br /> |}<br /> =&lt;big&gt;General Information&lt;/big&gt;=<br /> ==&lt;big&gt;Specification Data&lt;/big&gt;==<br /> [[File:BE-TS Specification Data.png|alt=IOP-401 BE-TS (10-23) Specification Data|frameless|600x600px]]<br /> {| class=&quot;wikitable&quot;<br /> | colspan=&quot;2&quot; |<br /> !BE-24-2-TS<br /> !BE-36-2-TS<br /> !BE-42-2-TS<br /> |-<br /> !A<br /> |Overall Length<br /> |156.5&quot;<br /> |180.5&quot;<br /> |192.5&quot;<br /> |-<br /> !B<br /> |Overall Width<br /> |72&quot;<br /> |72&quot;<br /> |72&quot;<br /> |-<br /> !C<br /> |Overall Height (Lowered)<br /> |158.188&quot;<br /> |158.188&quot;<br /> |160.688&quot;<br /> |-<br /> !<br /> |Overall Height (Raised w/ Overhead Guard)<br /> |182.375&quot;<br /> |182.375&quot;<br /> |182.375&quot;<br /> |-<br /> !<br /> |Overall Height (Raised w/ Strobe &amp; Alarm)<br /> |191.75&quot;<br /> |191.75&quot;<br /> |191.75&quot;<br /> |-<br /> !D<br /> |Wheel Base<br /> |98&quot;<br /> |122&quot;<br /> |134&quot;<br /> |-<br /> !E<br /> |Drive Wheel Center line<br /> |51&quot;<br /> |51&quot;<br /> |51&quot;<br /> |-<br /> !F<br /> |Battery Compartment Width<br /> |24&quot;<br /> |36&quot;<br /> |42&quot;<br /> |-<br /> !G<br /> |Ground Clearance<br /> |.625&quot;<br /> |.625&quot;<br /> |.625&quot;<br /> |-<br /> !H<br /> |Minimum Roller Height<br /> |6.5&quot;<br /> |6.5&quot;<br /> |6.5&quot;<br /> |-<br /> !I<br /> |Maximum Roller Height<br /> |96&quot;<br /> |96&quot;<br /> |96&quot;<br /> |-<br /> !J<br /> |Operator Platform Height (Lowered/Raised)<br /> |11&quot; / 103&quot;<br /> |11&quot; / 103&quot;<br /> |11&quot; / 103&quot;<br /> |}<br /> <br /> === UNITS WITH 10 HP POWER UNIT USED PRIOR TO DECEMBER, 2014 ===<br /> {| class=&quot;wikitable&quot;<br /> !<br /> !BE-24-2-TS<br /> !BE-36-2-TS<br /> !BE-42-2-TS<br /> |-<br /> |Travel Speed<br /> |0 to 190 ft/min / 0 to 0.97 m/s<br /> |0 to 190 ft/min / 0 to 0.97 m/s<br /> |0 to 190 ft/min / 0 to 0.97 m/s<br /> |-<br /> |Raise - Lower Speed<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |-<br /> |Powered Roller Speed<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |-<br /> |Arm Traverse Speed<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |-<br /> |Arm Rotation Time<br /> |6 s to 8 s<br /> |6 s to 8 s<br /> |6 s to 8 s<br /> |-<br /> |Draw Bar Pull / Vacuum<br /> <br /> (12&quot; / 305 mm Round Cup)<br /> |1,000 lb / 454 kg<br /> |1,000 lb / 454 kg<br /> |1,000 lb / 454 kg<br /> |-<br /> |Draw Bar Pull Magnet*<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |-<br /> |Vacuum Attach Time<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |-<br /> |Vacuum Release Time<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |-<br /> |Input Voltage<br /> |480 V / 3 ph / 60Hz<br /> |480 V / 3 ph / 60Hz<br /> |480 V / 3 ph / 60Hz<br /> |-<br /> |AC Current Draw<br /> |16.5 A<br /> |16.5 A<br /> |16.5 A<br /> |-<br /> |Control Circuit Voltage<br /> |120 V ac<br /> |120 V ac<br /> |120 V ac<br /> |-<br /> |Hydraulic Power Unit<br /> |10 hp / 7.46 kW<br /> |10 hp / 7.46 kW<br /> |10 hp / 7.46 kW<br /> |-<br /> |Hydraulic Pump<br /> |16 gal/min / 61 L/min<br /> |16 gal/min / 61 L/min<br /> |16 gal/min / 61 L/min<br /> |-<br /> |Power Unit<br /> |Hydraulic, Variable Displacement<br /> |Hydraulic, Variable Displacement<br /> |Hydraulic, Variable Displacement<br /> |-<br /> |Operating Pressure<br /> |1,500 psi / 103 bar<br /> |1,500 psi / 103 bar<br /> |1,500 psi / 103 bar<br /> |-<br /> |Vacuum Pump<br /> |1/3 hp / 0.25 kW<br /> |1/3 hp / 0.25 kW<br /> |1/3 hp / 0.25 kW<br /> |-<br /> |Vacuum<br /> |21&quot; Hg / 711 mbar<br /> |21&quot; Hg / 711 mbar<br /> |21&quot; Hg / 711 mbar<br /> |-<br /> |Full Load Capacity<br /> |10,000 lb / 4535 kg<br /> |10,000 lb / 4535 kg<br /> |10,000 lb / 4535 kg<br /> |-<br /> |Weight (Empty)<br /> |8,000 lb / 3629 kg<br /> |8,300 lb / 3765 kg<br /> |8,600 lb / 3901 kg<br /> |-<br /> |Total Compartment Rollers / Powered<br /> |11/5<br /> |11/5<br /> |11/5<br /> |-<br /> |Guide Track<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |-<br /> |Overall Dimensions (L x W x H)<br /> |156.5&quot; x 72&quot; x 158.188&quot;<br /> <br /> 3975 mm x 1829 mm x 4018 mm<br /> |180.5&quot; x 72&quot; x 158.188&quot;<br /> <br /> 4585 mm x 1829 mm x 4018 mm<br /> |192.5&quot; x 72&quot; x 160.688&quot;<br /> <br /> 4890 mm x 1829 mm x 4081 mm<br /> |-<br /> |Vacuum Arm Reach<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |-<br /> |Vacuum Arm Reach (Hydraulic Extension)<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |-<br /> |Magnet Arm Reach (Hydraulic Extension) Truck Side<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |-<br /> |Wheel Base<br /> |98&quot; / 2489 mm<br /> |122&quot; / 3099 mm<br /> |134&quot; / 3404 mm<br /> |-<br /> |Drive Wheel Center Line<br /> |51&quot; / 1295 mm<br /> |51&quot; / 1295 mm<br /> |51&quot; / 1295 mm<br /> |-<br /> |Battery Compartment Width<br /> |24&quot; / 610 mm<br /> |36&quot; / 915 mm<br /> |42&quot; / 1067 mm<br /> |-<br /> |Maximum Battery Dimensions<br /> <br /> (L x W x H)<br /> |48&quot; x 23&quot; x 34&quot;<br /> <br /> 1219 mm x 584 mm x 864 mm<br /> |48&quot; x 35&quot; x 34&quot;<br /> <br /> 1219 mm x 889 mm x 864 mm<br /> |48&quot; x 41&quot; x 34&quot;<br /> <br /> 1219 mm x 1041 mm x 864 mm<br /> |-<br /> |Minimum Battery Width<br /> <br /> (with vacuum / magnet)<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |-<br /> |Minimum Battery Height<br /> |17.75&quot; / 451 mm<br /> |17.75&quot; / 451 mm<br /> |17.75&quot; / 451 mm<br /> |-<br /> |Ground Clearance<br /> |0.63&quot; / 16 mm<br /> |0.63&quot; / 16 mm<br /> |0.63&quot; / 16 mm<br /> |-<br /> |Roller Height<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |-<br /> ! colspan=&quot;4&quot; |NOTES<br /> |-<br /> | colspan=&quot;4&quot; |''Specifications may vary ± 5% because of temperature, floor considerations, and operator efficiency. Values represented under normal operating conditions.''<br /> |-<br /> | colspan=&quot;4&quot; |''* Varies with battery case thickness and condition.''<br /> |}<br /> <br /> === UNITS WITH 20 HP POWER UNIT USED DECEMBER, 2014 TO PRESENT ===<br /> {| class=&quot;wikitable&quot;<br /> !<br /> !BE-24-2-TS<br /> !BE-36-2-TS<br /> !BE-42-2-TS<br /> |-<br /> |Travel Speed<br /> |0 to 240 ft/min / 0 to 1.22 m/s<br /> |0 to 240 ft/min / 0 to 1.22 m/s<br /> |0 to 240 ft/min / 0 to 1.22 m/s<br /> |-<br /> |Raise - Lower Speed<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |-<br /> |Powered Roller Speed<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |-<br /> |Arm Traverse Speed<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |-<br /> |Arm Rotation Time<br /> |6 s to 8 s<br /> |6 s to 8 s<br /> |6 s to 8 s<br /> |-<br /> |Draw Bar Pull / Vacuum<br /> <br /> (12&quot; / 305 mm Round Cup)<br /> |1,000 lb / 454 kg<br /> |1,000 lb / 454 kg<br /> |1,000 lb / 454 kg<br /> |-<br /> |Draw Bar Pull Magnet*<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |-<br /> |Vacuum Attach Time<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |-<br /> |Vacuum Release Time<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |-<br /> |Input Voltage<br /> |480 V / 3 ph / 60Hz<br /> |480 V / 3 ph / 60Hz<br /> |480 V / 3 ph / 60Hz<br /> |-<br /> |AC Current Draw<br /> |35 A<br /> |35 A<br /> |35 A<br /> |-<br /> |AC Current Draw w/ Electric Drive Option<br /> |42 A<br /> |42 A<br /> |42 A<br /> |-<br /> |Control Circuit Voltage<br /> |120 V ac<br /> |120 V ac<br /> |120 V ac<br /> |-<br /> |Hydraulic Power Unit<br /> |20 hp / 14.9 kW<br /> |20 hp / 14.9 kW<br /> |20 hp / 14.9 kW<br /> |-<br /> |Hydraulic Power Unit w/ Electric Drive Option<br /> |25 hp / 18.7 kW<br /> |25 hp / 18.7 kW<br /> |25 hp / 18.7 kW<br /> |-<br /> |Hydraulic Pump<br /> |22 gal/min / 83 L/min<br /> |22 gal/min / 83 L/min<br /> |22 gal/min / 83 L/min<br /> |-<br /> |Power Unit<br /> |Hydraulic, Variable Displacement<br /> |Hydraulic, Variable Displacement<br /> |Hydraulic, Variable Displacement<br /> |-<br /> |Operating Pressure<br /> |1,500 psi / 103 bar<br /> |1,500 psi / 103 bar<br /> |1,500 psi / 103 bar<br /> |-<br /> |Vacuum Pump<br /> |1/3 hp / 0.25 kW<br /> |1/3 hp / 0.25 kW<br /> |1/3 hp / 0.25 kW<br /> |-<br /> |Vacuum<br /> |21&quot; Hg / 711 mbar<br /> |21&quot; Hg / 711 mbar<br /> |21&quot; Hg / 711 mbar<br /> |-<br /> |Full Load Capacity<br /> |10,000 lb / 4535 kg<br /> |10,000 lb / 4535 kg<br /> |10,000 lb / 4535 kg<br /> |-<br /> |Weight (Empty)<br /> |8,000 lb / 3629 kg<br /> |8,300 lb / 3765 kg<br /> |8,600 lb / 3901 kg<br /> |-<br /> |Total Compartment Rollers / Powered<br /> |11/5<br /> |11/5<br /> |11/5<br /> |-<br /> |Guide Track<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |-<br /> |Overall Dimensions (L x W x H)<br /> |156.5&quot; x 72&quot; x 158.188&quot;<br /> <br /> 3975 mm x 1829 mm x 4018 mm<br /> |180.5&quot; x 72&quot; x 158.188&quot;<br /> <br /> 4585 mm x 1829 mm x 4018 mm<br /> |192.5&quot; x 72&quot; x 160.688&quot;<br /> <br /> 4890 mm x 1829 mm x 4081 mm<br /> |-<br /> |Vacuum Arm Reach<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |-<br /> |Vacuum Arm Reach (Hydraulic Extension)<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |-<br /> |Magnet Arm Reach (Hydraulic Extension) Truck Side<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |-<br /> |Wheel Base<br /> |98&quot; / 2489 mm<br /> |122&quot; / 3099 mm<br /> |134&quot; / 3404 mm<br /> |-<br /> |Drive Wheel Center Line<br /> |51&quot; / 1295 mm<br /> |51&quot; / 1295 mm<br /> |51&quot; / 1295 mm<br /> |-<br /> |Battery Compartment Width<br /> |24&quot; / 610 mm<br /> |36&quot; / 915 mm<br /> |42&quot; / 1067 mm<br /> |-<br /> |Maximum Battery Dimensions<br /> <br /> (L x W x H)<br /> |48&quot; x 23&quot; x 34&quot;<br /> <br /> 1219 mm x 584 mm x 864 mm<br /> |48&quot; x 35&quot; x 34&quot;<br /> <br /> 1219 mm x 889 mm x 864 mm<br /> |48&quot; x 41&quot; x 34&quot;<br /> <br /> 1219 mm x 1041 mm x 864 mm<br /> |-<br /> |Minimum Battery Width<br /> <br /> (with vacuum / magnet)<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |-<br /> |Minimum Battery Height<br /> |17.75&quot; / 451 mm<br /> |17.75&quot; / 451 mm<br /> |17.75&quot; / 451 mm<br /> |-<br /> |Ground Clearance<br /> |0.63&quot; / 16 mm<br /> |0.63&quot; / 16 mm<br /> |0.63&quot; / 16 mm<br /> |-<br /> |Roller Height<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |-<br /> ! colspan=&quot;4&quot; |NOTES<br /> |-<br /> | colspan=&quot;4&quot; |''Specifications may vary ± 5% because of temperature, floor considerations, and operator efficiency. Values represented under normal operating conditions.''<br /> |-<br /> | colspan=&quot;4&quot; |''* Varies with battery case thickness and condition.''<br /> |}<br /> ==&lt;big&gt;Pre-Installation Check&lt;/big&gt;==<br /> ===&lt;big&gt;&lt;u&gt;Floor Conditions&lt;/u&gt;&lt;/big&gt;===<br /> The floor is the single most critical area of the battery room.  A bad floor can cause significant issues with the installation as well as downtime and maintenance problems with the extractor.  The floor should be verified as to its minimum thickness and strength with user.  As noted on the drawing, the specific requirement of flatness for your particular type of system is listed. Below is a chart stating floor requirements.  If possible, especially on double stack and higher systems, a digital level should be used to shoot the grade for compliance with the specification.  The floor should also be inspected for severe cracks or excessively wide expansion joints in the travel path of the machine.  If floor drains are present, they must not have a grade to the opening that encroaches into the travel path. <br /> <br /> F-min is a rating method used to evaluate the flatness and levelness of a floor designated as &quot;defined travel path&quot;.  For example, an F-min rating of 60 means that there is no more than .129&quot; of variation in the transverse axis (wheels left to right) and .287&quot; variation in the longitudinal axis (front to back) on the equipment.<br /> <br /> To avoid potential damage to drive wheel assemblies, guide track, structural components, guide rollers  and issues with the inner frame equalization the &quot;defined travel path&quot; of the Battery Extractor should meet or exceed the recommended F-min specification. See chart below for the model specifications.<br /> {| class=&quot;wikitable&quot;<br /> !Model<br /> !F-Min<br /> !+/- Longitudinal<br /> !+/- Transverse<br /> !Slope Defect<br /> |-<br /> |SL, DS<br /> |40<br /> |.287&quot;<br /> |.192&quot;<br /> |.096&quot;<br /> |-<br /> |TS<br /> |60<br /> |.186&quot;<br /> |.129&quot;<br /> |.066&quot;<br /> |-<br /> |QS<br /> |85<br /> |.131&quot;<br /> |.091&quot;<br /> |.047&quot;<br /> |}[[File:IOP-400 BE-SL&amp;DS (10-23) Floor Conditions Pre-Installation Check.png|alt=BE-TS Floor Conditions Pre-Installation Check|frameless|500x500px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Floor_Conditions_Pre-Installation_Check.png]]<br /> ==&lt;big&gt;Operating Controls &amp; Instructions&lt;/big&gt;==<br /> <br /> === &lt;big&gt;&lt;u&gt;Operator Console&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Operator Console.png|alt=BE-TS Operator Console|frameless|1080x1080px]]<br /> <br /> '''''NOTE:''' Safety devices for the machine and the machine operating area SHALL NOT be rendered inoperable or misused.'' <br /> <br /> ''Typical BE-TS operator console shown above. Position of optional controls may vary from that shown depending on age of unit and/or combination of optional controls present.''<br /> <br /> ''HMI display standard on units shipped after February, 2020 for Industrial Internet of Things (IIoT) package.''<br /> <br /> ==== &lt;u&gt;&lt;big&gt;Safety Features&lt;/big&gt;&lt;/u&gt; ====<br /> &lt;u&gt;Key Switch&lt;/u&gt; – Located on the dash (see above).  Primary on/off switch to prevent unauthorized personnel from operating the BE.<br /> <br /> &lt;u&gt;Emergency Stop&lt;/u&gt; – Located on the dash (see above). Will stop all functions immediately, locking all hydraulics in place. To use, press down on the red button. The machine key must be used to reset the emergency stop.<br /> <br /> &lt;u&gt;Foot Switch&lt;/u&gt; – Must be depressed to operate the BE.  Stepping off the foot switch will stop all functions immediately, locking all hydraulics in place.  To resume use, depress the foot switch.<br /> <br /> &lt;u&gt;Gate Switch&lt;/u&gt; – The gate must be fully closed for the BE to operate.<br /> <br /> &lt;u&gt;Extractor Arm Switch&lt;/u&gt; – Does not permit the machine to move forward or backward unless the extractor arm is located in the center of the carriage between the indicating arrows located on the arm guard.<br /> <br /> &lt;u&gt;Powered Roller Cutout (PRC-1 or PRC-2) ''(if equipped)''&lt;/u&gt; – Disengages the powered roller function when the photo eye positioned on the edge of the BE battery compartment is disrupted by a battery, requiring additional input from the operator. Pressing the &quot;Power Roller Cutout&quot; override button (see above) on the dash will resume  powered roller operation when loading or unloading batteries from the BE carriage.<br /> <br /> &lt;u&gt;Horn ''(If equipped)''&lt;/u&gt; – Button located on the dash (see above).  Used to alert personnel before moving the BE.<br /> <br /> &lt;u&gt;Strobe Light ''(If equipped)''&lt;/u&gt; – Located on a vertical stanchion mounted to the right rear of the operator compartment. For units equipped with optional overhead guard (OHG), the beacon is located above of the operator compartment.  Beacon automatically flashes when the BE is switched on to visually notify the BE is in use.<br /> <br /> &lt;u&gt;Audible Alarm ''(if equipped)''&lt;/u&gt; – Mounted in the same location as the Strobe Light.  Automatically sounds when the BE is switched on to notify personnel that the BE is in use.<br /> <br /> &lt;u&gt;Blue Light ''(if equipped)''&lt;/u&gt; - Mounted at an elevated position on either end of the extractor which project a bright, highly concentrated blue beam pattern on the ground visually alerting personnel to the direction the extractor is moving.<br /> <br /> === &lt;big&gt;&lt;u&gt;Operation Overview&lt;/u&gt;&lt;/big&gt; ===<br /> <br /> * All operators should be familiar with the operator console of the extractor before performing any battery changes.  The controls of the console are simple and well marked.  It consists of six, manually operated, hydraulic control valves and a three position selector switch which controls the left and right vacuum cups (or optional magnets).<br /> * The operator shall make certain there are no persons or obstacles in the extractor path prior to traveling forward or reverse.<br /> * All manual valves are moved in the direction of the function travel which it controls with exception of the lift/lower valve, which is pulled toward the operator for &quot;up&quot; and pushed away for &quot;down.&quot;<br /> * In the event of any failure or malfunction, step off the dead-man switch or press the E-stop button and all functions will stop immediately, locking all hydraulics in place.<br /> * The extractor arm must be in the center of the carriage or the unit will not travel forward or reverse.<br /> * To ensure smooth operation, all valve movements should be made in a slow, deliberate motion.<br /> * Only one key should be provided to operate the extractor.<br /> * When leaving the machine, the operator shall turn off the key switch, remove the key and logout out of the IIoT (if equipped) to prevent unauthorized use<br /> * Ensure all the batteries and cables are properly stored in the battery stands prior to moving the BE.<br /> * The BE is designed to carry only one battery in each compartment on the carriage.<br /> * When loading the BE, position the batteries in the center of the compartments on the powered rollers to prevent any battery movement when transporting.<br /> * Ensure there are no projections outside of the carriage before moving the BE.<br /> <br /> === &lt;u&gt;&lt;big&gt;Operating Instructions&lt;/big&gt;&lt;/u&gt; ===<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Pre-Change Out Preparation&lt;/u&gt;&lt;/big&gt; ====<br /> 1. Position lift truck for change out in designated area.<br /> <br /> 2. Remove all battery restraints and disconnect battery cables following manufacturers guidelines.  (Be sure to position battery cables so as not to be damaged by the battery during change out.)<br /> <br /> 3. Board battery extractor and close safety gate.  (Gate must be fully closed or unit will not operate.)<br /> <br /> 4. Turn key switch to &quot;ON&quot; position. <br /> <br /> 5. Log in on the HMI display (if equipped with BE-IIoT package).<br /> <br /> 6. Depress foot pedal.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Discharged Battery Removal&lt;/u&gt;&lt;/big&gt; ====<br /> 1. Move extractor forward or reverse to position center of empty compartment with center of lift truck battery compartment. (Lead roller of extractor is equipped with a centering groove.  Users may find it beneficial to mark center of lift truck compartment to aid in alignment.)<br /> <br /> 2. Align extractor's roller compartment height with lift truck's battery compartment.<br /> <br /> 3. Rotate extractor arm into battery compartment aligned in Step 2.<br /> <br /> 4. Move extractor arm toward battery until vacuum cup/magnet contacts battery.<br /> <br /> [[File:NOTICE-warn.png|alt=NOTICE|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:NOTICE-warn.png]] '''DO NOT force cup/magnet into battery after initial contact with battery is made.'''<br /> <br /> 5. Energize vacuum/magnet by turning selector switch to proper direction, left or right.<br /> <br /> 6. Move extractor arm away from lift truck toward center of extractor roller bed, removing discharged battery.  (Battery should be pulled past first three idler rollers onto first or second powered roller.)<br /> <br /> 7. Turn off vacuum/magnet and move extractor arm away from battery 1&quot; to 2&quot;.<br /> <br /> 8. Rotate extractor arm out of battery compartment into opposite compartment (if empty) and center arm in carriage.<br /> <br /> 9. Move battery into center of compartment using powered rollers.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Charged Battery Retrieval&lt;/u&gt;&lt;/big&gt; ====<br /> 1. Locate charged battery for appropriate type of lift truck being changed.<br /> <br /> 2. Raise battery extractor roller compartment to proper level to gain access as needed to disconnect desired battery from its charger and disengage battery safety stop.<br /> <br /> [[File:WARNING-warn.png|alt=WARNING|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:WARNING-warn.png]] '''ALWAYS be sure charging has been completed and charger is not still charging battery. Dangerous sparking/arcing can occur if battery is unplugged from charger while charging.'''<br /> <br /> 3. Move extractor to appropriate rack position and align empty roller compartment with the center of the battery storage rack compartment.  ''(The battery safety stop of each compartment is the center of that compartment and should be used for alignment with the groove in the lead roller of the battery extractor compartment.'') <br /> <br /> 4. Rotate arm into empty compartment (if not already positioned there.)<br /> <br /> 5. Move extractor arm toward battery until vacuum cup/magnet contacts battery.<br /> <br /> 6. Energize vacuum cup/magnet by turning selector switch to proper direction, left or right.<br /> <br /> [[File:NOTICE-warn.png|alt=NOTICE|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:NOTICE-warn.png]] '''DO NOT force cup/magnet into battery after initial contact with battery is made.'''<br /> <br /> 7. Move extractor arm away from battery rack toward center of extractor roller bed, removing charged battery.  (Battery should be pulled past first three idler rollers onto first or second powered roller.)<br /> <br /> 8. Turn off vacuum/magnet and move extractor arm away from battery 1&quot; to 2&quot;.<br /> <br /> 9. Rotate extractor arm out of battery compartment into fully vertical position.<br /> <br /> 10. Move battery into center of compartment using powered rollers.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Discharged Battery Return&lt;/u&gt;&lt;/big&gt; ====<br /> 1. If required, adjust extractor compartment height to battery rack level with open battery compartment.  Drive extractor to align roller compartment containing discharged battery with open battery compartment.<br /> <br /> 2. Return discharged battery to battery rack using powered rollers.<br /> <br /> '''''NOTE:''''' ''In most instances, batteries can be deposited into battery racks in one motion using only powered rollers.  When this does not work, the battery may need slight assistance from extractor arm.  To do this, rotate arm into compartment such as one would if removing battery from rack.  If extractor is vacuum equipped, position top edge of cup slightly higher than edge of battery (or over lifting eye if so equipped) to prevent cup from adhering to battery - No vacuum/magnet is necessary for pushing. DO NOT activate vacuum/magnet switch.  Slowly push battery into rack until fully into compartment.''<br /> <br /> 3. Engage battery safety stop and connect battery to charger as required.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Charged Battery Installation&lt;/u&gt;&lt;/big&gt; ====<br /> 1. Lower extractor to fully lowered position.<br /> <br /> 2. Drive extractor back to lift truck and align roller compartment containing charged battery as performed in steps 1 and 2 of &quot;Discharged Battery Removal&quot;.<br /> <br /> 3. Move charged battery toward lift truck compartment by using powered rollers, verifying precise battery alignment.<br /> <br /> [[File:NOTICE-warn.png|alt=NOTICE|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:NOTICE-warn.png]] '''Many batteries are a tight fit into lift truck battery compartments. Care MUST be taken to ensure alignment is precise to avoid damage to battery, lift truck, and/or battery extractor.'''<br /> <br /> 4. Adjust extractor vertically as well as horizontally, if needed<br /> <br /> 5. Insert battery into lift truck as far as possible using only the powered rollers.<br /> <br /> 6. Rotate extractor arm into compartment and SLOWLY push battery into lift truck.  (Be sure to watch battery cables for interference.)<br /> <br /> 7. Return extractor arm to center of roller bed and lower extractor to fully lowered position.  Drive extractor out of immediate area.<br /> <br /> 8. Turn off key switch, remove key from switch, log out on the HMI display (if equipped with BE-IIoT package) and carefully exit extractor.<br /> <br /> 9. Secure newly installed battery in lift truck and reconnect battery cables.<br /> <br /> 10. Return lift truck to service<br /> {|<br /> ![[File:Caution-Warning.png|alt=CAUTION|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:Caution-Warning.png]]<br /> |'''DO NOT drive the BE into the travel path end stops. The end stops are designed to prevent the BE from accidentally traveling beyond its designated travel path. Driving the BE into the end stops will cause the BE to stop suddenly, possibly causing damage to the end stop, the BE and/or personal injury.'''<br /> |}<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Optional Powered Roller Cutout Operation&lt;/u&gt;&lt;/big&gt; ====<br /> Units equipped with optional Powered Roller Cutout, the powered roller override button must be depressed in addition to actuating the hydraulic valve when a battery disrupts the photo eye(s) at the edge of the battery compartments while using the powered rollers to transfer batteries on and off of the battery extractor.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;IIoT Equipped Units&lt;/u&gt;&lt;/big&gt; ====<br /> Units shipped after February, 2020 are equipped with BE-IIoT (Industrial Internet of Things) package. Operators must log in to the BE-IIoT system using the HMI (Human Machine Interface) display located on the dashboard to operate the extractor.<br /> <br /> When finished operating the extractor, the operator should log out of the BE-IIoT to prevent unauthorized access and/or operation of the extractor.<br /> <br /> == &lt;big&gt;Manual Unloading&lt;/big&gt; ==<br /> '''Lockout/tagout and de-energize all equipment prior to manually unloading any battery.'''<br /> <br /> In the event of power loss or an operational malfunction of the BE not allowing a battery to be unloaded using normal operating procedures, it is recommended a battery be removed from the BE using certified and approved vertical extraction methods and devices.<br /> {|<br /> |[[File:DANGER-warn.png|alt=DANGER|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:DANGER-warn.png]]<br /> |'''Read, understand and observe all safety warnings and procedures related to the vertical extraction device(s) being used.'''<br /> |}<br /> Should the status of the BE not allow for safe vertical extraction (due to position in the battery aisle or level of the inner carriage), only repairs required to safely maneuver the BE to a position allowing for safe vertical extraction should be made.  Once any batteries are safely unloaded, any remaining repairs can be made.<br /> {|<br /> |[[File:DANGER-warn.png|alt=DANGER|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:DANGER-warn.png]]<br /> |'''Extreme care should be taken when working under or around equipment supporting elevated loads. Unexpected movement of the equipment could cause the load and/or equipment to fall. ALWAYS be sure devices of adequate size and strength are in place to prevent any personnel working under the elevated load from being crushed. Serious personal injury or death will occur.'''<br /> |}<br /> <br /> == &lt;big&gt;Spare Parts List&lt;/big&gt; ==<br /> Use only BHS approved replacement parts.<br /> <br /> Refer to the appropriate Spare Parts Kit (vacuum equipped units - Pt# BE-SPKV-TS, magnet equipped units - Pt# BE-SPKM-TS) for the list of items recommended by BHS to have on hand for BE-TS models to minimize any downtime due to minor breakdowns that may occur under normal operating conditions.<br /> <br /> BHS offers many replacement parts kits containing relevant or related parts when replacing certain individual parts or replacing any obsolete / upgraded parts.<br /> <br /> BHS also offers a supplement hose kit (Pt# 80342003) which contains an assortment of hoses allowing any hose on the extractor to be replaced immediately with a temporary hose of equal length or longer. After the extractor is back up and running, the failed hose can be taken to have an exact replacement made. Once the new hose is made and installed, the temporary hose can be returned to the kit for future use.<br /> <br /> Go to [[www.bhs1.com]] and click &quot;Parts&quot; for all the latest parts kits and corresponding installation instructions (if applicable).<br /> <br /> BHS recommends that a full maintenance inspection report similar to the one provided be done at least once a month.<br /> <br /> Any parts found to be excessively worn or damaged should promptly be replaced unless said parts pose a safety risk to the operator and/or extractor, in which case the unit should be removed from service until the problem(s) are remedied (See<br /> <br /> Operator's Daily Checklist.)<br /> <br /> ''Note: Spare parts kits contain parts for the most current machine design/configuration. Due to continuous design and manufacturing updates and improvements, not all the parts in the spare parts kits may be compatible with older units. Consult factory when ordering spare or replacement parts for existing units in the field to ensure part compatibility.''<br /> <br /> = &lt;big&gt;Parts Sections&lt;/big&gt; =<br /> <br /> == &lt;big&gt;Chassis&lt;/big&gt; ==<br /> <br /> === &lt;big&gt;&lt;u&gt;Equalization Components&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Equalization Components.png|alt=BE-TS Chassis Equalization|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PT0222-1<br /> |LINK-CONNECTING-#60<br /> |<br /> |<br /> |8<br /> |-<br /> |2<br /> |HW0017<br /> |NUT-HEX-3/4-10<br /> |<br /> |<br /> |8<br /> |-<br /> |3<br /> |HW0115<br /> |WASHER-LOCK-3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |43097001<br /> |STUD-ANCHOR-5&quot;<br /> |<br /> |''Upper''<br /> |4<br /> |-<br /> |5<br /> |HW0020<br /> |NUT-JAM-3/4-10<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43097002<br /> |STUD-ANCHOR-2&quot;<br /> |<br /> |''Lower''<br /> |4<br /> |-<br /> |7<br /> |00158001-14<br /> |CHAIN-ROLLER-#60<br /> |<br /> |<br /> |4<br /> |}<br /> [[File:BE-TS Equalization Components - 1.0.2.png|alt=BE-TS Chassis Equalization 2|frameless|575x575px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PT0416<br /> |COLLAR-SHAFT-1 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |2<br /> |43097006<br /> |KEY-3/8&quot; X 2 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |PT0224<br /> |SPROCKET-60B12 X 1 1/2&quot;<br /> |<br /> |''Keyed in line''<br /> |8<br /> |-<br /> |4<br /> |PT0405<br /> |FLANGE BEARING-2 BOLT-1 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1 1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |6<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> | rowspan=&quot;4&quot; |7<br /> |43127001<br /> |SHAFT-EQUALIZATION-81.75&quot;<br /> |<br /> |''BE-24-2-TS''<br /> |2<br /> |-<br /> |43327001<br /> |SHAFT-EQUALIZATION-105.75&quot;<br /> |<br /> |''BE-36-2-TS''<br /> |2<br /> |-<br /> |44327001<br /> |SHAFT-EQUALIZATION-117.75&quot;<br /> |<br /> |''BE-42-2-TS''<br /> |2<br /> |-<br /> |44527001<br /> |SHAFT-EQUALIZATION-75.75&quot;<br /> |<br /> |''BE-42-1-TS''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |8<br /> |PT0503<br /> |BEARING-FLANGED LOAD-2 1/4&quot;<br /> |<br /> |''Used after December 2003''<br /> |8<br /> |-<br /> |43026001<br /> |BEARING-FLANGED LOAD-2 1/4&quot; ''(MACHINED)''<br /> |<br /> |''Used prior to December 2003''<br /> |8<br /> |-<br /> |9<br /> |HW0025<br /> |NUT-JAM-7/8-14<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0117<br /> |WASHER-LOCK-7/8&quot; ''(NOT SHOWN)''<br /> |<br /> |''Used prior to August 2002''<br /> |8<br /> |}<br /> <br /> === &lt;u&gt;'''&lt;big&gt;Bridge &amp; Cross Bar&lt;/big&gt;'''&lt;/u&gt; ===<br /> [[File:BE-TS Bridge and Cross Bar.png|alt=BE-TS Bridge and Cross Bar|frameless|524x524px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1 1/4&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |2<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |20<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |20<br /> |-<br /> |4<br /> |HW0515<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |''Fully Threaded''<br /> |8<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> === &lt;u&gt;'''&lt;big&gt;Lift Cylinder Connections&lt;/big&gt;'''&lt;/u&gt; ===<br /> [[File:BE-TS Lift Cylinder Connections.png|alt=BE-TS Lift Cylinder Connections|frameless|589x589px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |00158001-13<br /> |CHAIN-ROLLER-#80<br /> |<br /> |<br /> |4<br /> |-<br /> |2<br /> |HW0014<br /> |NUT-HEX-1-8<br /> |<br /> |<br /> |8<br /> |-<br /> |3<br /> |43897002<br /> |STUD-LIFT-INNER FRAME<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |PT0204<br /> |LINK-CONNECTING-#80<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |43897001<br /> |STUD-LIFT-OUTER FRAME<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43815018<br /> |BRACKET-CYLINDER SUPPORT<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |SS0761<br /> |U-BOLT-CYLINDER MOUNTING<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |12<br /> |-<br /> |9<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |10<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |8<br /> |-<br /> | rowspan=&quot;2&quot; |11<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |<br /> |''Idler caster end of unit'' <br /> |2<br /> |-<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |''Drive wheel end of unit'' <br /> |2<br /> |-<br /> |12<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |14<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |43822002<br /> |CLEVIS ASSEMBLY<br /> |<br /> |''Sold as assembly only''<br /> |4<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Guidance Arm&lt;/big&gt;&lt;/u&gt;''' ===<br /> [[File:BE-TS Guidance Arm.png|alt=BE-TS Guidance Arm|frameless|562x562px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> ! colspan=&quot;2&quot; |NO. REQ<br /> |-<br /> |1<br /> |43015011<br /> |GUIDE ARM WELDMENT, 2 ROLLER<br /> |<br /> |<br /> |2<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |2<br /> |43017025<br /> |SPACER-GUIDE ARM<br /> |<br /> |''† 1/2&quot; thick''<br /> |4<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |3<br /> |41215204<br /> |GUIDE ARM WELDMENT, 4 ROLLER<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |2<br /> |-<br /> |4<br /> |41217274<br /> |SPACER-GUIDE ARM<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |4<br /> |-<br /> |5<br /> |43012007<br /> |CAM ROLLER-1 3/4&quot;<br /> |<br /> |<br /> |4<br /> |8<br /> |-<br /> |6<br /> |HW0115<br /> |WASHER-LOCK-3/4&quot;<br /> |<br /> |<br /> |4<br /> |8<br /> |-<br /> |7<br /> |HW0011<br /> |NUT-HEX-3/4-16<br /> |<br /> |<br /> |4<br /> |8<br /> |-<br /> |8<br /> |HW0509<br /> |BOLT-HHCS-1/2-13 X 4-1/2&quot;<br /> |<br /> |<br /> |4<br /> |6<br /> |-<br /> |9<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |6<br /> |-<br /> |10<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |4<br /> |6<br /> |-<br /> |11<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |4<br /> |6<br /> |-<br /> |12<br /> |41215234<br /> |GUIDE ARM WELDMENT (POLY)<br /> |<br /> |<br /> |2<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |13<br /> |41217317<br /> |POLY SLIDE MOUNTING BLOCK<br /> |<br /> |<br /> |4<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |14<br /> |41217318<br /> |POLY SLIDE<br /> |<br /> |<br /> |4<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |15<br /> |HW0501<br /> |BOLT-HHCS-1/2-13 X 1&quot;<br /> |<br /> |<br /> |12<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |16<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |12<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |17<br /> |91253A546<br /> |BOLT FHSCS-1/4-20 X 1-1/2&quot;<br /> |<br /> |<br /> |8<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |18<br /> |HW0003<br /> |NUT-NILN-1/4-20<br /> |<br /> |<br /> |8<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> ! colspan=&quot;7&quot; |NOTES<br /> |-<br /> | colspan=&quot;7&quot; |''† Older units equipped with (1) 1&quot; thick spacer per guide arm bracket.'' <br /> |-<br /> | colspan=&quot;7&quot; |''†† Multiple styles of guide arms have been utilized on extractors. Refer to the parts diagrams for correct replacement parts.'' <br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Roller Bed Componenets&lt;/big&gt;&lt;/u&gt;''' ===<br /> ==== '''&lt;big&gt;''Idler Rollers''&lt;/big&gt;''' ====<br /> [[File:BE-TS Idler Rollers.png|alt=BE-TS Idler Rollers|frameless|746x746px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;3&quot; |1<br /> |43182001<br /> |LEAD ROLLER ASSEMBLY-24&quot;<br /> |<br /> |''With alignment groove''<br /> |4<br /> |-<br /> |43382001<br /> |LEAD ROLLER ASSEMBLY-36&quot;<br /> |<br /> |''With alignment groove''<br /> |4<br /> |-<br /> |43482001<br /> |LEAD ROLLER ASSEMBLY-42&quot;<br /> |<br /> |''With alignment groove''<br /> |4<br /> |-<br /> | rowspan=&quot;3&quot; |2<br /> |43182002<br /> |IDLER ROLLER ASSEMBLY-24&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |43382002<br /> |IDLER ROLLER ASSEMBLY-36&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |43482002<br /> |IDLER ROLLER ASSEMBLY-42&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> | rowspan=&quot;3&quot; |3<br /> |43187002<br /> |SHAFT-HEX-.75&quot; X 25.75&quot;<br /> |<br /> |''24&quot; compartments''<br /> |8<br /> |-<br /> |43387002<br /> |SHAFT-HEX-.75&quot; X 37.75&quot;<br /> |<br /> |''36&quot; compartments''<br /> |8<br /> |-<br /> |43487002<br /> |SHAFT-HEX-.75&quot; X 43.75&quot;<br /> |<br /> |''42&quot; compartments''<br /> |8<br /> |-<br /> | rowspan=&quot;3&quot; |4<br /> |43187003<br /> |SHAFT-HEX-.75&quot; X 27.5&quot;<br /> |<br /> |''24&quot; compartments''<br /> |4<br /> |-<br /> |43387003<br /> |SHAFT-HEX-.75&quot; X 39.5&quot;<br /> |<br /> |''36&quot; compartments''<br /> |4<br /> |-<br /> |43487003<br /> |SHAFT-HEX-.75&quot; X 45.5&quot;<br /> |<br /> |''42&quot; compartments''<br /> |4<br /> |-<br /> |5<br /> |HW1058<br /> |PIN-HITCH<br /> |<br /> |<br /> |24<br /> |}<br /> '''&lt;big&gt;''Powered Rollers''&lt;/big&gt;'''<br /> <br /> [[File:BE-TS Powered Rollers.png|alt=BE-TS Powered Rollers|frameless|546x546px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;3&quot; |1<br /> |43182003<br /> |POWERED ROLLER-24&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |43382003<br /> |POWERED ROLLER-36&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |43485003<br /> |POWERED ROLLER-42&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |2<br /> |43087001<br /> |JOURNAL-POWERED ROLLER<br /> |<br /> |<br /> |10<br /> |-<br /> |3<br /> |PT0404<br /> |FLANGE BEARING-3-BOLT-1&quot;<br /> |<br /> |<br /> |20<br /> |-<br /> |4<br /> |HW0321<br /> |BOLT-HHCS-5/16-18 X 1 1/4&quot;<br /> |<br /> |<br /> |60<br /> |-<br /> |5<br /> |HW0105<br /> |WASHER-LOCK-5/16&quot;<br /> |<br /> |<br /> |60<br /> |-<br /> |6<br /> |HW0004<br /> |NUT-HEX-5/16-18<br /> |<br /> |<br /> |60<br /> |-<br /> |7<br /> |PT0033<br /> |SPROCKET-35B18 X 1&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |8<br /> |00197028<br /> |KEY-1/4&quot; X 1 1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |00158001-16<br /> |CHAIN-ROLLER-#35<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |PT0031<br /> |LINK-CONNECTING-#35<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |PT0418<br /> |COLLAR-SHAFT-1&quot;<br /> |<br /> |<br /> |10<br /> |}<br /> [[File:BE-TS Powered Rollers Detail A.png|alt=BE-TS Powered Rollers Detail A|frameless|542x542px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0120<br /> |MOTOR-HYDRAULIC-160CC<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW1071<br /> |KEY-WOODRUFF-#808 STD<br /> |<br /> |''Supplied with Item 1''<br /> |A/R<br /> |-<br /> |3<br /> |H1544<br /> |ADAPTER-#6 JICM X #10 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |18<br /> |-<br /> |5<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |18<br /> |-<br /> |6<br /> |43017004<br /> |PLATE-MOTOR MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |PT0302-1<br /> |COUPLING BODY-#40 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |PT0301<br /> |CHAIN-COUPLING-#40<br /> |<br /> |''Includes connecting pin''<br /> |2<br /> |-<br /> |9<br /> |00197026<br /> |KEY-1/4&quot; X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43097003<br /> |KEY-1/4&quot; X 5/8&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Hose Carrier&lt;/big&gt;&lt;/u&gt;''' ===<br /> [[File:BE-TS Hose Carrier.png|alt=BE-TS Hose Carrier|frameless|550x550px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PT0629<br /> |CARRIER TRACK<br /> |<br /> |''81 links required''<br /> |10'<br /> |-<br /> |2<br /> |PT0631<br /> |BRACKET-UPPER MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0212<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0032<br /> |NUT-NILN-#10-24<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |PT0630<br /> |BRACKET-LOWER MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |7<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |43817056-2<br /> |BRACKET-CARRIER TRACK MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |HW0401<br /> |BOLT-HHCS-3/8-16 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |14<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |43817057<br /> |PLATE-CARRIER TRACK SUPPORT<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === &lt;big&gt;'''&lt;u&gt;Cable Retractor&lt;/u&gt;'''&lt;/big&gt; ===<br /> [[File:BE-TS Cable Retractor.png|alt=BE-TS Cable Retractor|frameless|585x585px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |CCR-12HD<br /> |TAKE UP REEL-CARRIER TRACK<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Operator Gate&lt;/big&gt;&lt;/u&gt;''' ===<br /> [[File:BE-TS Discontinued Drop Bar Operator Gate.png|alt=BE-TS Discontinued Drop Bar Operator Gate|frameless|568x568px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43015004<br /> |GATE-OPERATOR<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0407<br /> |BOLT-HHCS-3/8-16 X 2 3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |<br /> |<br /> |1<br /> |}<br /> [[File:BE-TS Operator Gate Continued.png|alt=BE-TS Operator Gate Continued|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43017064-2<br /> |LATCH-SWING GATE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0418<br /> |BOLT-HHCS-3/8-16 X 2 1/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0031<br /> |NUT-LOCK-3/8-16<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |N/A<br /> |HINGE-SPRING<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |5<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |HW1037<br /> |STOP-GATE<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0003<br /> |NUT-NILN-1/4-20<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |N/A<br /> |TORSION SPRING<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |11<br /> |HW0816<br /> |SCREW-HHCS-SELF DRILLING-#10 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |43806001<br /> |ANTI-FATIGUE MAT<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |43017058-2<br /> |THRESHOLD<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |HW0107<br /> |WASHER-LOCK3/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |HW9002<br /> |GAS SPRING<br /> |80292015<br /> |<br /> |1<br /> |-<br /> |19<br /> |43017086-2<br /> |BRACKET-MOUNTING-SPRING<br /> |80292015<br /> |<br /> |2<br /> |-<br /> |20<br /> |HW0815<br /> |SCREW-SELF DRILLING-#12-24 X 1&quot; T-4<br /> |80292015<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Part Discontinued. Spring Hinge and Torsion Spring must be replaced with Gas Spring Kit.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Guarding&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Outer Carriage Guards&lt;/big&gt;''''' ====<br /> <br /> ===== '''''1-Piece Outside Frame Guarding''''' =====<br /> [[File:BE-TS Outside Frame Guard 1-Piece.png|alt=BE-TS Outside Frame Guard 1-Piece|frameless|550x550px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817038<br /> |GUARD-FAR END-TOP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817037<br /> |GUARD-FAR END-MIDDLE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43817035<br /> |GUARD-FAR END-BOTTOM<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |33<br /> |}<br /> <br /> ===== '''''Split Outside Frame Guarding''''' =====<br /> [[File:BE-TS Outside Split Frame Guard.png|alt=BE-TS Outside Split Frame Guard|frameless|562x562px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817103<br /> |GUARD-FAR END-TOP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817102<br /> |GUARD-FAR END-MIDDLE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43817101<br /> |GUARD-FAR END-BOTTOM<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |37<br /> |}<br /> <br /> ==== '''&lt;big&gt;''Inner Carriage Guards''&lt;/big&gt;''' ====<br /> <br /> ===== '''''Inner Carriage Guards (Rotary Actuator)''''' =====<br /> [[File:BE-TS Inner Carriage Guard Rotary.png|alt=BE-TS Inner Carriage Guard (Rotary Actuator Units)|frameless|554x554px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817041-2<br /> |GUARD-FRONT-OPERATOR CONSOLE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817042-2<br /> |GUARD-INNER-FRAME<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |43014006-2<br /> |GUARD-LINEAR DRIVE SCREW<br /> |<br /> |<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |4<br /> |43017010-2<br /> |GUARD-SIDE-ARM CARRIER SHAFT<br /> |<br /> |<br /> |2<br /> |-<br /> |44517002-2<br /> |GUARD-SIDE-ARM CARRIER SHAFT<br /> |<br /> |''† Single compartment units only''<br /> |1<br /> |-<br /> |5<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |34<br /> |-<br /> |6<br /> |43017009-2<br /> |BRACKET-SCREW GUARD MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Single Compartment Guard replaces standard, Far Side Arm Carrier Shaft Guard.'' <br /> |}<br /> '''''Inner Carriage Guards (Helical Actuator)'''''<br /> <br /> [[File:BE-TS Inner Carriage Guard Helical Actuator.png|alt=BE-TS Inner Carriage Guard (Helical Actuator Units)|frameless|547x547px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817041-2<br /> |GUARD-FRONT-OPERATOR CONSOLE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817042-2<br /> |GUARD-INNER-FRAME<br /> |<br /> |<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |3<br /> |43017081-2<br /> |GUARD-SIDE-ARM CARRIER SHAFT<br /> |<br /> |<br /> |2<br /> |-<br /> |44517003-2<br /> |GUARD-SIDE-ARM CARRIER SHAFT<br /> |<br /> |''† Single compartment units only''<br /> |1<br /> |-<br /> |4<br /> |43017080-2<br /> |BRACKET-SIDE GUARD MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |43017082-3<br /> |MOUNT-CHAIN GUARD-LEAD SCREW<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43017082-4<br /> |MOUNT-CHAIN GUARD-LEAD SCREW<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |43017083-2<br /> |GUARD-CHAIN-LEAD SCREW<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0347<br /> |BOLT-BHSCS-1/4-20 X 3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |28<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Single Compartment Guard replaces standard, Far Side Arm Carrier Shaft Guard.'' <br /> |}<br /> <br /> ==== '''&lt;big&gt;''Dash &amp; Platform Guards''&lt;/big&gt;''' ====<br /> [[File:BE-TS Dash &amp; Platform Guards.png|alt=BE-TS Dash &amp; Platform Guards|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41614004-2<br /> |DASHBOARD-OPERATOR CONSOLE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817040<br /> |KICK PLATE-OPERATOR CONSOLE<br /> |<br /> |''41.5&quot; high''<br /> |1<br /> |-<br /> |3<br /> |43817086-2<br /> |DASHBOARD-OPERATOR CONSOLE<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43817088<br /> |KICK PLATE-OPERATOR CONSOLE<br /> |<br /> |''33.5&quot;'' ''high''<br /> |1<br /> |-<br /> |5<br /> |43817110-2<br /> |FRAME-DASHBOARD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |A/R<br /> |PLATE-DASHBOARD<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |7<br /> |HW0060<br /> |NUT-CLIP-#10-24<br /> |<br /> |<br /> |12<br /> |-<br /> |8<br /> |SS0114<br /> |BHSCS-#10-24 X 1/2&quot;-SST<br /> |<br /> |<br /> |12<br /> |-<br /> |9<br /> |PL0602<br /> |VINYL EDGING<br /> |<br /> |''At Foot Switch (Not shown)'' <br /> |1'<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Consult factory''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Lift Cylinder Guards&lt;/big&gt;''''' ====<br /> [[File:BE-TS Lift Cylinder Guards.png|alt=BE-TS Lift Cylinder Guards|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;2&quot; |1<br /> |43815016<br /> |GUARD-CLEVIS<br /> |<br /> |Operator right / Far left<br /> |2<br /> |-<br /> |43815017<br /> |GUARD-CLEVIS<br /> |<br /> |Operator left / Far right<br /> |2<br /> |-<br /> |2<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Labels &amp; Placards&lt;/big&gt;&lt;/u&gt;''' ===<br /> [[File:BE-TS Labels &amp; Placards Chassis.png|alt=BE-TS Labels &amp; Placards Chassis|frameless|546x546px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |00196616<br /> |LABEL-&quot;NO RIDERS ALLOWED&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |00196210<br /> |LABEL-WARNING-&quot;OPERATION BY AUTHORIZED PERSONNEL ONLY&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43696001<br /> |PLACARD-OFF / ON<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43096018<br /> |PLACARD-RACK LEVEL ASSIST<br /> |<br /> |''† If equipped''<br /> |1<br /> |-<br /> |5<br /> |43096015<br /> |PLACARD-PLATFORM RAISE / LOWER<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43096010<br /> |PLACARD-HORN<br /> |<br /> |''† If equipped''<br /> |1<br /> |-<br /> |7<br /> |43096016<br /> |PLACARD-DRIVE / ARM ROTATION<br /> |<br /> |<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |8<br /> |43096012<br /> |PLACARD-VACUUM OFF / ON<br /> |<br /> |''Vacuum units only''<br /> |1<br /> |-<br /> |43096011<br /> |PLACARD-MAGNET OFF / ON<br /> |<br /> |''Magnet units only (Not shown)''<br /> |1<br /> |-<br /> |9<br /> |43096017<br /> |PLACARD-POWERED ROLLER CUTOUT OVERRIDE<br /> |<br /> |''† If equipped''<br /> |1<br /> |-<br /> |10<br /> |43096013<br /> |PLACARD-POWERED ROLLERS / ARM TRAVERSE<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |00196633<br /> |LABEL-NOTICE-&quot;IN LINE VACUUM FILTER...&quot;<br /> |<br /> |''(1) per side (Vacuum units only)''<br /> |2<br /> |-<br /> |12<br /> |SM-1197<br /> |LABEL-ARM POSITION ARROW<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |00196609<br /> |LABEL-NOTICE-&quot;ARM MUST BE POSITIONED BETWEEN ARROWS...&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |00196602<br /> |LABEL-NOTICE-&quot;LUBRICATION POINTS ON UNDERSIDE&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |00196218<br /> |LABEL-WARNING-&quot;ELECTRICAL VOLTAGE HAZARD&quot;<br /> |<br /> |''Magnet units only''<br /> |1<br /> |-<br /> |16<br /> |00196238<br /> |LABEL-WARNING-&quot;STRONG MAGNETIC<br /> <br /> FIELD/DO NOT USE WITH PACEMAKER&quot;<br /> |<br /> |''†† Magnet units only''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Rack Level Assist (LAI), Horn and Powered Roller Cutout (PRC) are optional features. Not all units are equipped with these options.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Pacemaker Warning Label takes the place of the discontinued, Triangular Magnetic Field Label.''<br /> |}<br /> [[File:BE-TS Labels &amp; Placards Frame.png|alt=BE-TS Labels &amp; Placards Frame|frameless|549x549px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |00196004<br /> |LABEL-CAUTION-&quot;WATCH FOR BATTERY AND CHARGER CABLES IN TRAVEL PATH&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |00196216<br /> |LABEL-WARNING-&quot;CHAIN ENTANGLEMENT<br /> <br /> HAZARD&quot;<br /> |<br /> |''(1) per Clevis Guard'' <br /> |4<br /> |-<br /> |3<br /> |00196622<br /> |LABEL-LIFT POINT<br /> |<br /> |''(2) each end''<br /> |4<br /> |-<br /> |4<br /> |00196700<br /> |DECAL-BHS-24&quot; X 7.875&quot;<br /> |<br /> |''Far end (Not shown)''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |5<br /> |00196630<br /> |LABEL-NOTICE-HYD. OIL SPEC. (AW 68)<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |00196645<br /> |LABEL-NOTICE-HYD. OIL SPEC. (AW 32)<br /> |<br /> |''† See notes'' <br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |† Most units shipped prior to December 2014 require AW 68 Hydraulic Oil. Some units shipped prior to December 2014 shipped with AW 32 for low temperature applications.<br /> |}<br /> <br /> == &lt;big&gt;Extractor Arm&lt;/big&gt; ==<br /> {| class=&quot;wikitable&quot;<br /> !SYMBOL<br /> !DESCRIPTION / NOTICE<br /> !ACTUATOR DIAGRAM<br /> |-<br /> |[[File:IOP-400 BE-SL&amp;DS (10-23) Rotary Actuator Symbol.png|alt=Rotary Actuator Symbol|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Rotary_Actuator_Symbol.png]]<br /> |<br /> ==='''&lt;u&gt;&lt;big&gt;Rotary Actuator Symbol&lt;/big&gt;&lt;/u&gt;'''===<br /> Battery Extractors shipped prior to May 2020 are equipped with Rotary Actuator Extractor Arms. Parts Diagrams Specific to the Rotary Actuator design are indicated with the Rotary Actuator symbol.<br /> |[[File:IOP-400 BE-SL&amp;DS (10-23) Rotary Actuator Extractor Arm.png|alt=BE-TS Rotary Actuator|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Rotary_Actuator_Extractor_Arm.png]]<br /> |-<br /> |[[File:IOP-400 BE-SL&amp;DS (10-23) Helical Actuator Symbol.png|alt=Helical Actuator Symbol|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Helical_Actuator_Symbol.png]]<br /> |<br /> ===&lt;big&gt;'''&lt;u&gt;Helical Actuator Symbol&lt;/u&gt;'''&lt;/big&gt;===<br /> Battery Extractors shipped from May 2020 to Present are equipped with Helical Actuator Extractor Arms. Parts Diagrams Specific to the Rotary Actuator design are indicated with the Helical Actuator Symbol.<br /> |[[File:IOP-400 BE-SL&amp;DS (10-23) Helical Actuator Extractor Arm.png|alt=BE-TS Helical Actuator|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Helical_Actuator_Extractor_Arm.png]]<br /> |}<br /> ===&lt;big&gt;&lt;u&gt;Vacuum Components &amp; Swing Arms&lt;/u&gt;&lt;/big&gt;===<br /> ====''&lt;big&gt;Vacuum Arms (Rotary Actuator)&lt;/big&gt;''====<br /> [[File:BE-TS Vacuum Arms (Rotary Actuator).png|alt=BE-TS Vacuum Arms (Rotary Actuator)|frameless|619x619px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;2&quot; |1<br /> |N/A<br /> |ARM-PUSH/PULL-30&quot;<br /> |<br /> |''&lt;sup&gt;†&lt;/sup&gt; Discontinued''<br /> |1<br /> |-<br /> |N/A<br /> |ARM-PUSH/PULL-36&quot;<br /> |<br /> |''&lt;sup&gt;†&lt;/sup&gt; Discontinued''<br /> |1<br /> |-<br /> |2<br /> |HW0509<br /> |BOLT-HHCS-1/2-13 X 4 1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |P0505<br /> |BUSHING-RED-#6 NPT X #4 FNPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |P0402<br /> |HOSE BARB-1/4 X #4 MNPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0428<br /> |STUD-VACUUM-3/8-16 X 5&quot;<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |9<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |HW-KIT-2<br /> |<br /> |40<br /> |-<br /> |10<br /> |HW1001<br /> |SPRING-3/8&quot;<br /> |HW-KIT-2<br /> |<br /> |24<br /> |-<br /> |11<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |12<br /> |HW0424<br /> |NUT-JAM-3/8-16<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |REF<br /> |43052006<br /> |ADJUSTABLE PUSH/PULL ARM<br /> |<br /> |''Includes Items 13 through 17''<br /> |1<br /> |-<br /> |13<br /> |43057034<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |43055008<br /> |VACUUM CUP MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''&lt;sup&gt;†&lt;/sup&gt; One-piece Arms no longer available. Must replace with Adjustable Arm.''<br /> |}<br /> <br /> ====&lt;big&gt;''Vacuum Cups''&lt;/big&gt;====<br /> [[File:BE-TS Vacuum Cups.png|alt=Vacuum Cups|frameless|563x563px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;4&quot; |A/R<br /> |00162004<br /> |VACUUM CUP-10&quot; 3-PC (STANDARD)<br /> |<br /> |''&lt;sup&gt;†&lt;/sup&gt; Includes Items 1 through 4''<br /> | rowspan=&quot;4&quot; |A/R<br /> |-<br /> |00162003<br /> |VACUUM CUP-12&quot; 3-PC (STANDARD)<br /> |<br /> |''&lt;sup&gt;†&lt;/sup&gt; Includes Items 4 through 7''<br /> |-<br /> |00162007<br /> |VACUUM CUP-10&quot; 3-PC, REINFORCED<br /> |<br /> |''Includes Items 1,3,4 &amp; 8''<br /> |-<br /> |00162005<br /> |VACUUM CUP-12&quot; 3-PC, REINFORCED<br /> |<br /> |''Includes Items 4,5,7 &amp; 9''<br /> |-<br /> |1<br /> |00164006<br /> |CASTING-10&quot; VACUUM CUP<br /> |<br /> | rowspan=&quot;3&quot; |''10&quot; cup only''<br /> |1<br /> |-<br /> |2<br /> |00164004<br /> |SEAL-RUBBER-10&quot;<br /> |<br /> |1<br /> |-<br /> |3<br /> |00165002<br /> |PLATE-FRONT-10&quot;<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0311<br /> |BOLT-FHSCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |00166001<br /> |CASTING-12&quot; VACUUM CUP<br /> |<br /> | rowspan=&quot;3&quot; |''12&quot; cup only''<br /> |1<br /> |-<br /> |6<br /> |00164001<br /> |SEAL-RUBBER-12&quot;<br /> |<br /> |1<br /> |-<br /> |7<br /> |00165001<br /> |PLATE-FRONT-12&quot;<br /> |<br /> |1<br /> |-<br /> |8<br /> |00164007<br /> |SEAL-RUBBER-10&quot;-REINFORCED<br /> |<br /> |<br /> |A/R<br /> |-<br /> |9<br /> |00167003<br /> |SEAL-RUBBER-12&quot;-REINFORCED<br /> |<br /> |<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''&lt;sup&gt;†&lt;/sup&gt; 10&quot; and 12&quot; 1-Piece Cups no longer available. Must replace with 3-Piece Cup. Verify required cup size prior to ordering.''<br /> |}<br /> <br /> ====&lt;big&gt;''Swing Arms (Rotary Actuator)''&lt;/big&gt;====<br /> [[File:BE-TS Swing Arms (Rotary Actuator).png|alt=BE-TS Swing Arms (Rotary Actuator)|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> |ITEM<br /> |BHS PART NUMBER<br /> |DESCRIPTION<br /> |REF. KIT NO.<br /> |NOTES<br /> |NO. REQ<br /> |-<br /> | rowspan=&quot;3&quot; |1<br /> |45055001<br /> |TIE PLATE-SWING ARM<br /> |<br /> |BE-24-2-TS<br /> |1<br /> |-<br /> |45255001<br /> |TIE PLATE-SWING ARM<br /> |<br /> |BE-36-2-TS (NOT SHOWN)<br /> |1<br /> |-<br /> |45355001<br /> |TIE PLATE-SWING ARM<br /> |<br /> |BE-42-2-TS (NOT SHOWN)<br /> |1<br /> |-<br /> |2<br /> |43055004<br /> |SWING ARM-RHS<br /> |†<br /> |NOT SOLD INDIVIDUALLY<br /> |1<br /> |-<br /> |3<br /> |43055002<br /> |SWING ARM-LHS<br /> |†<br /> |NOT SOLD INDIVIDUALLY<br /> |1<br /> |-<br /> |4<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0113<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0010<br /> |NUT-JAM-5/8-11<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |PT0413<br /> |COLLAR-SHAFT-3&quot;<br /> |80252001<br /> |<br /> |2<br /> |-<br /> |8<br /> |43027001<br /> |SHAFT-ROTARY ACTUATOR<br /> |80252001<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW1013<br /> |KEY-3/8&quot; X 12&quot;<br /> |80252001<br /> |<br /> |1<br /> |-<br /> |10<br /> |PT0419<br /> |BEARING-SAE 841-2&quot; I.D., 3&quot; OD, 1/8&quot; THICK<br /> |80252001<br /> |<br /> |3<br /> |-<br /> |11<br /> |43052005<br /> |CAP-BEARING<br /> |<br /> |INCLUDES BEARING<br /> |2<br /> |-<br /> |12<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |13<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |14<br /> |43057014<br /> |STANDOFF-WIRE<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |HW0312<br /> |SCREW-SHSS-1/4-20 X 1&quot;-CUP POINT<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |43057003<br /> |CUSHION-SWING ARM<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |43055001<br /> |STOP-SWING ARM<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |20<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |21<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |H1565<br /> |ADAPTER-45 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |23<br /> |H1600<br /> |ADAPTER-90 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |&lt;sup&gt;†&lt;/sup&gt; ''Included in multiple kits.''<br /> |-<br /> | colspan=&quot;6&quot; |See ''Single Compartment Swing Arm Stop for the the Single Compartment Swing Arm Stop.''<br /> |}<br /> <br /> === '''''Vacuum Swing Arm Stop (Rotary Actuator)''''' ===<br /> [[File:BE-TS Single Compartment Swing Arms (Rotary Actuator).png|alt=BE-TS Single Compartment Swing Arms (Rotary Actuator)|frameless|575x575px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |44555001<br /> |STOP-SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43057003<br /> |CUSHION-SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43057008<br /> |SPACER-SWING ARM STOP<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |}<br /> ====''&lt;big&gt;Vacuum Pump (Rotary Actuator)&lt;/big&gt;''====<br /> [[File:BE-TS Vacuum Pumps (Rotary Actuator).png|alt=BE-TS Vacuum Pumps (Rotary Actuator)|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |P0005<br /> |PUMP-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |P0208<br /> |FILTER-HI FLOW<br /> |<br /> |<br /> |3<br /> |-<br /> |3<br /> |P0503<br /> |NIPPLE-#4 NPT-BRASS<br /> |<br /> |<br /> |3<br /> |-<br /> |4<br /> |P0502<br /> |TEE-#4 FNPT-BRASS<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |P0506<br /> |ELBOW-STR-90 DEG-#4 NPT-BRASS<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |P0402<br /> |HOSE BARB-1/4 X #4 NPTM-BRASS<br /> |<br /> |<br /> |6<br /> |-<br /> |7<br /> |P0207<br /> |VALVE-VACUUM RELEASE<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |P0302<br /> |HOSE-VACUUM-1/4&quot; I.D.<br /> |<br /> |''Two 6&quot; pieces''<br /> |1'<br /> |-<br /> |9<br /> |P0302<br /> |HOSE-VACUUM-1/4&quot; I.D.<br /> |<br /> |''Short Arm side''<br /> |1'<br /> |-<br /> |10<br /> |P0302<br /> |HOSE-VACUUM-1/4&quot; I.D.<br /> |<br /> |''Long Arm side''<br /> |2'<br /> |-<br /> |11<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |HW0212<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |E0624<br /> |CONNECTOR-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |15a<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |''Not shown''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |16<br /> |E0501<br /> |CORD-14-4 SW/SOW<br /> |<br /> |''Withtout Ground Connection in Arm''<br /> | rowspan=&quot;2&quot; |15'<br /> |-<br /> |E0514<br /> |CORD-16-5 SW/SOW<br /> |<br /> |<br /> |-<br /> |17<br /> |43057014<br /> |STANDOFF-CABLE<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |HW0206<br /> |SCREW-RHMS-#10-32 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |19<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |20<br /> |43057021<br /> |PLATE-STIFFENER<br /> |†<br /> |<br /> |2<br /> |-<br /> |21<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |†<br /> |<br /> |12<br /> |-<br /> |22<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |†<br /> |<br /> |12<br /> |-<br /> |23<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |†<br /> |<br /> |12<br /> |-<br /> |24<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |†<br /> |''Not shown''<br /> |24<br /> |-<br /> |25<br /> |P0111<br /> |FILTER-VACUUM-INLINE<br /> |<br /> |''Not shown''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |&lt;sup&gt;†&lt;/sup&gt; ''Included in multiple kits.''<br /> |}<br /> ===&lt;u&gt;&lt;big&gt;Rotary Actuator&lt;/big&gt;&lt;/u&gt;===<br /> [[File:BE-TS Rotary Actuator.png|alt=BE-TS Rotary Actuator|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43046001<br /> |ROTARY ACTUATOR<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |80000002<br /> |ROTARY ACTUATOR BASE ASSEMBLY<br /> |<br /> |''Without Actuator''<br /> |1<br /> |-<br /> |2A<br /> |N/A<br /> |VERTICAL CARRIER PLATE-OUTER<br /> |<br /> |''Included with 80000002''<br /> |2<br /> |-<br /> |2B<br /> |N/A<br /> |VERTICAL CARRIER PLATE-INNER<br /> |<br /> |''Included with 80000002''<br /> |1<br /> |-<br /> |2C<br /> |N/A<br /> |CARRIER BASE PLATE<br /> |<br /> |''Included with 80000002''<br /> |1<br /> |-<br /> |3<br /> |HW1070<br /> |PIN-PULL DOWEL-5/8&quot; X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0508<br /> |BOLT-SHCS-1/2-13 X 3/4&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW1045<br /> |PIN-PULL DOWEL-3/8&quot; X 1 1/2&quot;<br /> |<br /> |''Included with 80000002''<br /> |6<br /> |-<br /> |6<br /> |HW0412<br /> |BOLT-SHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |''Included with 80000002''<br /> |12<br /> |-<br /> |7<br /> |H0010<br /> |FITTING-BULKHEAD-3/4-16 X #4 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 NPTM<br /> |<br /> |<br /> |2<br /> |}<br /> ===&lt;u&gt;&lt;big&gt;Carrier Shafts &amp; Bearings ''(Rotary Actuator)''&lt;/big&gt;&lt;/u&gt;===<br /> [[File:BE-TS Rotary Actuator Carrier Shafts.png|alt=BE-TS Carrier Shafts (Rotary Actuator)|frameless|560x560px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43057045<br /> |CARRIER SHAFT-EXTRACTOR ARM<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |2<br /> |43054007<br /> |BEARING-EXTRACTOR ARM CARRIER<br /> |80252002<br /> |''†† See notes''<br /> |4<br /> |-<br /> |3<br /> |HW0412<br /> |BOLT-SHCS-3/8-16 X 1 1/4&quot;<br /> |80252002<br /> |<br /> |16<br /> |-<br /> |4<br /> |PT0413<br /> |COLLAR-SHAFT-3&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |PT0624<br /> |FITTING-ZERK<br /> |80252002<br /> |''Not shown''<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Vacuum_Extended_Reach_(Rotary_Actuator) Vacuum Extended Reach (Rotary Actuator)] section for Extended Reach equipped units.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Carrier_Shafts_&amp;_Bearings Carrier Shafts &amp; Bearings (Helical Actuator)] section for Helical Actuator equipped units.''<br /> |}<br /> <br /> ===&lt;u&gt;&lt;big&gt;Drive Screw Components ''(Rotary Actuator)''&lt;/big&gt;&lt;/u&gt;===<br /> ====''&lt;big&gt;Drive Nut Assembly (Rotary Actuator)&lt;/big&gt;''====<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Drive Nut Assembly Rotary Actuator.png|alt=BE-SL&amp;DS Drive Nut Assembly Rotary Actuator|frameless|537x537px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Drive_Nut_Assembly_Rotary_Actuator.png]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43054006<br /> |DRIVE NUT ASSEMBLY<br /> |80252003<br /> |&lt;sup&gt;''†''&lt;/sup&gt; ''See notes''<br /> |1<br /> |-<br /> |2<br /> |HW0426<br /> |BOLT-SHCS-3/8-16 X 5 1/2&quot;<br /> |80252003<br /> |&lt;sup&gt;''††''&lt;/sup&gt; ''See notes''<br /> |4<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |80252003<br /> |&lt;sup&gt;''††''&lt;/sup&gt; ''See notes''<br /> |4<br /> |-<br /> |4<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |80252003<br /> |&lt;sup&gt;''††''&lt;/sup&gt; ''See notes''<br /> |4<br /> |-<br /> |5<br /> |PT0624<br /> |FITTING-ZERK<br /> |80252003<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''&lt;sup&gt;†&lt;/sup&gt; See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Drive_Nut_Assembly_(Helical_Actuator) Drive Nut Assembly (Helical Actuator)] section for Helical Actuator equipped units.''<br /> |-<br /> | colspan=&quot;6&quot; |''&lt;sup&gt;††&lt;/sup&gt; It is recommended to replace mounting hardware when replacing Drive Nut Assembly.''<br /> |}<br /> ====''&lt;big&gt;Drive Screw&lt;/big&gt;''====<br /> =====''[Current] Drive Screw Assembly (Frame #'s 374 to Present)''=====<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Drive Screw Rotary Current.png|alt=Current BE-SL &amp; BE-DS Drive Screw (Rotary Actuator)|frameless|531x531px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Drive_Screw_Rotary_Current.png]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43024001<br /> |SCREW-LINEAR DRIVE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |PT0119<br /> |SPROCKET-50B15 X 1 3/16&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43097004<br /> |KEY-1/4 X 7/8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |00158001-15<br /> |CHAIN-ROLLER-#50<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |PT0102<br /> |LINK-CONNECTING-#50<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |PT0406<br /> |FLANGE BEARING-4 BOLT-1 3/16&quot;<br /> |<br /> |''Alloy casting''<br /> |2<br /> |-<br /> |7<br /> |HW0503<br /> |BOLT-HHCS-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |PT0107<br /> |SPROCKET-50B15 X 1&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HC0121<br /> |MOTOR-HYDRAULIC-100CC<br /> |<br /> |''SAE 2-Bolt mount''<br /> |1<br /> |-<br /> |11<br /> |H1605<br /> |ADAPTER-90 DEG-#6 JICM X #10 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW1071<br /> |KEY-WOODRUFF-#808 STD<br /> |<br /> |''Supplied with Item 10''<br /> |A/R<br /> |-<br /> |13<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |14<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |15<br /> |43017007<br /> |PLATE-MOUNTING-SCREW DRIVE MOTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |43057019<br /> |PLATE-COVER<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0415<br /> |BOLT-SHCS-3/8-16 X 3/4&quot;<br /> |<br /> |<br /> |8<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> ! colspan=&quot;6&quot; |ITEMS BELOW ARE REQUIRED FOR REPLACING THE LINEAR DRIVE<br /> SCREW ON UNITS WITH FRAME #'S OF 373 AND EARLIER<br /> |-<br /> ! colspan=&quot;6&quot; |LINEAR DRIVE SCREW UPDATE KIT<br /> |-<br /> |REF<br /> |80252011<br /> |UPGRADE KIT<br /> |<br /> |<br /> |1<br /> |-<br /> |1<br /> |43024001<br /> |SCREW-LINEAR DRIVE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |PT0119<br /> |SPROCKET-50B15 X 1 3/16&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43097004<br /> |KEY-1/4 X 7/8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |PT0406<br /> |FLANGE BEARING-4 BOLT-1 3/16&quot;<br /> |<br /> |''Alloy casting''<br /> |2<br /> |-<br /> |7<br /> |HW0503<br /> |BOLT-HHCS-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |16<br /> |43057019<br /> |PLATE-COVER<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |43057022<br /> |SHIM-18GA<br /> |<br /> |''May not be required (Not shown)''<br /> |2<br /> |-<br /> |19<br /> |43057018<br /> |TEMPLATE-BEARING MOUNT PATTERN<br /> |<br /> |''Not shown''<br /> |1<br /> |-<br /> |20<br /> |80000015<br /> |INSTRUCTION DETAIL<br /> |<br /> |''Not shown''<br /> |REF<br /> |-<br /> |21<br /> |43057020<br /> |SPACER PLATE<br /> |<br /> |''Not shown''<br /> |2<br /> |}<br /> =====''[Discontinued] Drive Screw Assembly (Frame #'s 373 and Earlier)''=====<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Drive Screw (Rotary Actuator) Discontinued.png|alt=Discontinued BE-SL &amp; BE-DS Drive Screw (Rotary Actuator)|frameless|532x532px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Drive_Screw_(Rotary_Actuator)_Discontinued.png]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |SCREW-LINEAR DRIVE (DISCONTINUED)<br /> |<br /> |''See 80252011 Upgrade Kit''<br /> |1<br /> |-<br /> |2<br /> |PT0118<br /> |SPROCKET-50B12 X 1 3/16&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43097004<br /> |KEY-1/4&quot; X 7/8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |00158001-15<br /> |CHAIN-ROLLER-#50<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |PT0102<br /> |LINK-CONNECTING-#50<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43057016<br /> |BLOCK-BEARING RETAINER<br /> |<br /> |<br /> |2<br /> |-<br /> |6a<br /> |PT0414<br /> |RACE-TAPERED ROLLER BEARING<br /> |<br /> |''Included with 43057016''<br /> |2<br /> |-<br /> |7<br /> |PT0623<br /> |SEAL-GREASE<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0416<br /> |BOLT-SHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |PT0415<br /> |BEARING-TAPERED ROLLER<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW1050<br /> |NUT-LOCK<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |43057017<br /> |PLATE-COVER<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0415<br /> |BOLT-SHCS-3/8-16 X 3/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |13<br /> |PT0624<br /> |FITTING-ZERK<br /> |<br /> |<br /> |2<br /> |}<br /> ===&lt;big&gt;&lt;u&gt;Hose Carrier Plate&lt;/u&gt;&lt;/big&gt;===<br /> [[File:BE-TS Hose Carrier Plate.png|alt=BE-TS Hose Carrier Plate|frameless|554x554px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43915018<br /> |PLATE-HOSE CARRIER<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |PT0618<br /> |BRACKET-FIXED END<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |PT0617<br /> |HOSE CARRIER<br /> |<br /> |''20 links required''<br /> |3 FT<br /> |-<br /> |5<br /> |PT0619<br /> |BRACKET-MOVING END<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |9<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |10<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HC0262<br /> |VALVE-CROSS PORT RELIEF<br /> |<br /> |''Includes cartridges''<br /> |1<br /> |-<br /> |12a<br /> |43846002<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''†† For Item 12 (Not shown)''<br /> |2<br /> |-<br /> |13<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |H1560<br /> |ADAPTER-45 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |E1329<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |''PVC - Includes cover''<br /> |1<br /> |-<br /> |19<br /> |HW0212<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |20<br /> |HW0102<br /> |WASHER-FLAT-#10-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |21<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |22<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |23<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |''For Items 21 &amp; 22 (Not shown)''<br /> |3<br /> |-<br /> |24<br /> |HW1076<br /> |BOLT-FHSCS-3/8-16 X 1&quot;<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Units built prior to February 2014 without extended reach option use (4) HW0403 mounting bolts.''<br /> <br /> ''†† Cartridges are for replacement only.''<br /> |}<br /> <br /> === &lt;big&gt;'''&lt;u&gt;Magnet Components ''(Rotary Actuator)''&lt;/u&gt;'''&lt;/big&gt; ===<br /> <br /> ==== '''''&lt;big&gt;[Discontinued] Magnet Arm Configuration&lt;/big&gt;''''' ====<br /> [[File:BE-TS (Discontinued) Magnet Arm Configuration.png|alt=BE-TS (Discontinued) Magnet Arm Configuration|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41257014<br /> |TIE PLATE-SWING ARM<br /> |<br /> |''All units''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |41655008<br /> |EXTENSION-ARM<br /> |<br /> |''BE-36 only (Not shown)''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |43455001<br /> |EXTENSION-ARM<br /> |<br /> |''BE-42 only (Not shown)''<br /> |1<br /> |-<br /> |2<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0113<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0010<br /> |NUT-JAM-5/8-11<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |41655001<br /> |CARRIER TUBE-MAGNET SWING SHAFT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |7<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |9<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |6<br /> |-<br /> |10<br /> |41657006<br /> |SHAFT-MAGNET SWING<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |41698001<br /> |KEY-3/8&quot; X 7/16&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |N/A<br /> |STOP-MAGNET SWING<br /> |<br /> |''† Dicontinued''<br /> |1<br /> |-<br /> |13<br /> |PT0430<br /> |FLANGE BEARING-4 BOLT-1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |HW0513<br /> |BOLT-HHCS-1/2-13 X 2 1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |15<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |16<br /> |-<br /> |16<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |17<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |-<br /> |18<br /> |41655002<br /> |PLATE-MAGNET MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |41257015<br /> |BLOCK-TIGHTENER<br /> |<br /> |''2-piece item''<br /> |1<br /> |-<br /> |20<br /> |41257016<br /> |BLOCK-FIXED<br /> |<br /> |''2-piece item''<br /> |1<br /> |-<br /> |21<br /> |HW0423<br /> |BOLT-SHCS-3/8-16 X 3 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0806<br /> |SET SCREW-3/8-16 X 2&quot;<br /> |<br /> |''Replaces Swivel Head''<br /> |4<br /> |-<br /> |24<br /> |HW0424<br /> |NUT-JAM-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |25<br /> |41657017<br /> |INSULATOR-MAGNET MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |26<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |27<br /> |41657008<br /> |PAD-MAGNET SLIDE<br /> |<br /> |<br /> |2<br /> |-<br /> |28<br /> |HW0314<br /> |BOLT-FHSCS-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Refer to [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#&amp;#x5B;Current&amp;#x5D;_Magnet_Arm_Configuration_(Rotary_Actuator) &lt;nowiki&gt;[Current] Magnet Arm Configuration (Rotary Actuator)&lt;/nowiki&gt;] section for replacement / upgrade parts.''<br /> |}<br /> <br /> ==== &lt;big&gt;''[Current] Magnet Arm Configuration (Rotary Actuator)''&lt;/big&gt; ====<br /> [[File:BE-TS (Current) Magnet Arm Configuration.png|alt=BE-TS (Current) Magnet Arm Configuration|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |80252012<br /> |MAGNET SWING STOP KIT<br /> |<br /> |''Includes Items 1 through 6''<br /> |A/R<br /> |-<br /> |1<br /> |43057029<br /> |PLATE-STOP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43058003<br /> |SLEEVE-STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |43057030<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |PL0501<br /> |GROMMET-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0509<br /> |BOLT-HHCS-1/2-13 X 4 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |44557003<br /> |PLATE-STOP<br /> |<br /> |''† Single compartment units only''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† For units equipped with Pivot Shaft. See [Current] Magnet Arm Configuration (Rotary Actuator) for units with Independent Magnet Pivot Bearings.'' <br /> |}<br /> '''&lt;big&gt;''Magnet Pivot Stop (Rotary Actuator)''&lt;/big&gt;'''<br /> <br /> [[File:BE-TS Magnet Pivot Stop.png|alt=BE-TS Magnet Pivot Stop|frameless|547x547px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |MAGNET PUSH/PULL ARM<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |43055010<br /> |MAGNET MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |PT0470<br /> |BEARING-MAGNET PIVOT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0525<br /> |BOLT-CARRIAGE-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |5<br /> |HW0524<br /> |BOLT-CARRIAGE-1/2-13 X 2&quot;<br /> |<br /> |''†† Stop Plate location''<br /> |4<br /> |-<br /> |6<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |7<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |16<br /> |-<br /> |8<br /> |43058009<br /> |PLATE-ROTATION STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |43058003<br /> |SLEEVE-STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43058010<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |PL0501<br /> |GROMMET-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |43057037<br /> |INSULATOR-BOTTOM<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |16<br /> |41657008<br /> |SLIDE-MAGNET<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0314<br /> |BOLT-FHSCS-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |44558001<br /> |PLATE-ROTATION STOP<br /> |<br /> |''†† Single compartment units only''<br /> |2<br /> |-<br /> |REF<br /> |43052014<br /> |ADJUSTABLE PUSH-PULL ARM<br /> |<br /> |''Includes Items 19-23''<br /> |A/R<br /> |-<br /> |19<br /> |43055018<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |20<br /> |43055019<br /> |MAGNET MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |21<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |22<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† 1-Piece Arm no longer available. Must be replaced with Adjustable Arm.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Single compartment Stop Plates require (1) additional 2&quot; long Carriage Bolt each''<br /> |}<br /> <br /> ==== &lt;big&gt;''Magnet Mounting Hardware (Rotary Actuator)''&lt;/big&gt; ====<br /> [[File:BE-TS Magnet Mounting Hardware (Rotary Actuator).png|alt=BE-TS Magnet Mounting Hardware (Rotary Actuator)|frameless|554x554px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43032009<br /> |MAGNET ASSEMBLY<br /> |<br /> |''Includes Items 1 through 12''<br /> |A/R<br /> |-<br /> |1<br /> |N/A<br /> |ELECTROMAGNET-95VDC<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |E0314<br /> |SENSOR-PROXIMITY-30MM<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |N/A<br /> |GASKET-REAR<br /> |<br /> |''Discontinued - Not used''<br /> |2<br /> |-<br /> |4<br /> |41657002<br /> |COVER-PROXIMITY SENSOR HOUSING<br /> |<br /> |''Rear''<br /> |2<br /> |-<br /> |5<br /> |HW1065<br /> |SCREW-SHCS-#6-32 X 3/8&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |6<br /> |HW1066<br /> |WASHER-LOCK-#6<br /> |<br /> |<br /> |8<br /> |-<br /> |7<br /> |E0376<br /> |INDICATOR LIGHT<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |8<br /> |E0335<br /> |RECEPTACLE-5 PIN MALE<br /> |<br /> |''With 12&quot; lead''<br /> |2<br /> |-<br /> |9<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |N/A<br /> |GASKET-FRONT<br /> |<br /> |''Discontinued - Not used''<br /> |2<br /> |-<br /> |11<br /> |41657003<br /> |COVER-PROXIMITY SENSOR HOUSING<br /> |80252015<br /> |''Front''<br /> |2<br /> |-<br /> |12<br /> |HW0138<br /> |SCREW-FHSCS-#8-32 X 3/8&quot;<br /> |80252015<br /> |<br /> |8<br /> |-<br /> |13<br /> |HW0433<br /> |STUD-1/2-13 X 5&quot;<br /> |80252006<br /> | rowspan=&quot;5&quot; |''For units with Magnet Pivot Shaft only.'' <br /> <br /> ''See [Discontinued] Magnet Arm Configuration for units built prior to 11/01/14''<br /> |8<br /> |-<br /> |14<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |80252006<br /> |8<br /> |-<br /> |15<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |80252006<br /> |40<br /> |-<br /> |16<br /> |HW1002<br /> |SPRING-1/2&quot;<br /> |80252006<br /> |24<br /> |-<br /> |17<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |80252006<br /> |8<br /> |-<br /> |18<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |80252014<br /> | rowspan=&quot;4&quot; |''For units with independent Pivot Bearings only.'' <br /> <br /> ''See [Current] Magnet Arm Configuration for units built 11/01/14 to present)''<br /> |4<br /> |-<br /> |19<br /> |HW1002<br /> |SPRING-1/2&quot;<br /> |80252014<br /> |4<br /> |-<br /> |20<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |80252014<br /> |8<br /> |-<br /> |21<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |80252014<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Extractors built or replacement magnets shipped prior to October 2021 used multi-piece indicator lights with replaceable bulb and lens and are no longer available. Current indicator light is a 1-piece LED assembly. Replacement of any multi-piece component requires replacing entire assembly with current, 1-piece indicator light.''<br /> |}<br /> <br /> === '''''Magnet Cords (Rotary Actuator)''''' ===<br /> [[File:BE-TS Magnet Cords.png|alt=BE-TS Magnet Cords|frameless|555x555px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1105<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |''Weather proof box''<br /> |1<br /> |-<br /> |2<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |E1106<br /> |COVER-JUNCTION BOX<br /> |<br /> |''Weather proof with gasket'' <br /> |1<br /> |-<br /> |4<br /> |E0333<br /> |RECEPTACLE-9 PIN MALE<br /> |<br /> |''With 12&quot; lead''<br /> |1<br /> |-<br /> |5<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |6<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |7<br /> |E0334<br /> |CORD-5 PIN FEMALE<br /> |<br /> |''With 36&quot; lead''<br /> |2<br /> |-<br /> |8<br /> |E0332<br /> |CORD-9 PIN FEMALE-90 DEG<br /> |<br /> |''With 36&quot; lead''<br /> |1<br /> |-<br /> |9<br /> |PL0501<br /> |GROMMET-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |41657013-2<br /> |PLATE-PANEL MOUNTING<br /> |<br /> |''With single cable hole''<br /> |1<br /> |-<br /> |11<br /> |E0334-6<br /> |CORD-5 PIN FEMALE<br /> |<br /> |''With 72&quot; lead''<br /> |2<br /> |-<br /> |12<br /> |43057038-2<br /> |PLATE-PANEL MOUNTING<br /> |<br /> |''With dual cable holes''<br /> |1<br /> |}<br /> '''''&lt;big&gt;Magnet Panel Mounting (Rotary Actuator)&lt;/big&gt;'''''<br /> <br /> [[File:BE-TS Panel Mounting (Rotary Actuator).png|alt=BE-TS Panel Mounting (Rotary Actuator)|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43057021<br /> |PLATE-STIFFENER<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |''Not shown''<br /> |24<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |5<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |12<br /> |-<br /> |6<br /> |41637001<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0325<br /> |BOLT-5/16-18 X 1 3/4&quot;-PAN HEAD<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |N/A<br /> |INSULATOR-THREADED FEMALE<br /> |<br /> |''Discontinued''<br /> |4<br /> |-<br /> |9<br /> |HW0106<br /> |WASHER-FLAT-5/16&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0326<br /> |NUT-NILN-5/16-18<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |E1016<br /> |FUSE HOLDER<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |E0325<br /> |FUSE-7AMP-250VAC<br /> |<br /> |''FLM-7 or FNM-7''<br /> |1<br /> |-<br /> |16<br /> |PL0307<br /> |INSULATOR-MALE STUD<br /> |<br /> |<br /> |4<br /> |}<br /> '''''&lt;big&gt;Magnet Extractor Electrical Panel (Rotary Actuator)&lt;/big&gt;'''''<br /> <br /> [[File:BE-TS Magnet Extractor Electrical Panel (Rotary Actuator).png|alt=BE-TS Magnet Extractor Electrical Panel (Rotary Actuator)|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41637001<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41637002<br /> |WIRE WAY<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |41637003<br /> |WIRE WAY<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |41637004<br /> |TRACK-TERMINAL BLOCK MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |41637005<br /> |TRACK-TERMINAL BLOCK MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |7<br /> |HW0132<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |<br /> |10<br /> |-<br /> |8<br /> |HW0133<br /> |NUT-NILN-#8-32<br /> |<br /> |''Not shown''<br /> |16<br /> |-<br /> |9<br /> |E1020<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |12<br /> |-<br /> |10<br /> |E1040<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |E1330<br /> |END ANCHOR<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |E1009<br /> |RECTIFIER-FULL WAVE BRIDGE<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |HW0135<br /> |SCREW-RHMS-#8-32 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |E1313<br /> |SOCKET-RELAY-8 PIN<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0139<br /> |SCREW-RHMS-#8-32 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |E0331<br /> |RELAY-DPDT-110VAC<br /> |<br /> |''with Indicator Light''<br /> |2<br /> |}<br /> <br /> === &lt;big&gt;'''&lt;u&gt;Swing Arm Stop (Rotary Actuator)&lt;/u&gt;'''&lt;/big&gt; ===<br /> [[File:BE-TS Swing Arm Stop (Rotary Actuator).png|alt=BE-TS Swing Arm Stop (Rotary Actuator)|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055007<br /> |MOUNT-STOP-SWING ARM<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |2<br /> |43057024<br /> |STOP-SWING ARM<br /> |<br /> |''BE-24''<br /> |4<br /> |-<br /> |43057023<br /> |STOP-SWING ARM<br /> |<br /> |''BE-36 &amp; BE-42''<br /> |4<br /> |-<br /> |3<br /> |HW0304<br /> |BOLT-HHCS-1/4-20 X 1 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Vacuum_Swing_Arm_Stop_(Rotary_Actuator) Vacuum Swing Arm Stop (Rotary Actuator)] section for single compartment stop mount and stop.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Extended Reach (Rotary Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Vacuum Extended Reach (Rotary Actuator).png|alt=BE-TS Vacuum Extended Reach (Rotary Actuator)|frameless|536x536px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41257014<br /> |TIE PLATE-SWING ARM<br /> |<br /> |''All units''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |41655008<br /> |EXTENSION-ARM<br /> |<br /> |''BE-36 only (Not shown)''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |43455001<br /> |EXTENSION-ARM<br /> |<br /> |''BE-42 only (Not shown)''<br /> |1<br /> |-<br /> |2<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |P0301-1<br /> |HOSE-COIL-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |41257035<br /> |STANDOFF<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW1072<br /> |RESTRAINT-HOSE<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0318<br /> |BOLT-SHCS-1/4-20 X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |HW0312<br /> |SCREW-SHSS-1/4-20 X 1&quot;-CUP POINT<br /> |<br /> |<br /> |1<br /> |}<br /> [[File:BE-TS Vacuum Extended Reach (Rotary Actuator) 2.png|alt=BE-TS Vacuum Extended Reach (Rotary Actuator)|frameless|547x547px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41255005<br /> |ARM-EXTENSION-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0416<br /> |CYLINDER-EXTENDED REACH-VACUUM<br /> |<br /> |''2 1/2&quot; X 12&quot; Cylinder''<br /> |1<br /> |-<br /> |3<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JICM X #6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |41257031<br /> |PIN-CLEVIS END<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |00197036<br /> |PIN-ROD END<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1058<br /> |PIN-HITCH<br /> |<br /> |<br /> |4<br /> |}<br /> [[File:BE-TS Vacuum Extended Reach (Rotary Actuator) 3.png|alt=BE-TS Vacuum Extended Reach (Rotary Actuator) 3|frameless|541x541px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41255004<br /> |HOUSING-EXTENDED REACH-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41257030<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |41258002<br /> |PLATE-BEARING<br /> |80258001<br /> |''Side''<br /> |2<br /> |-<br /> |8<br /> |41258005<br /> |PLATE-SHIM<br /> |80258001<br /> |''Side''<br /> |2<br /> |-<br /> |9<br /> |41258003<br /> |PLATE-BEARING<br /> |80258001<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |10<br /> |41258004<br /> |PLATE-SHIM<br /> |80258001<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |11<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |28<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |28<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Extended Reach (Rotary Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Extended Reach Rotary Actuator.png|alt=BE-TS Extended Reach Rotary Actuator|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43046001<br /> |ROTARY ACTUATOR<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |80000002<br /> |ROTARY ACTUATOR BASE ASSEMBLY<br /> |<br /> |''Without Actuator''<br /> |1<br /> |-<br /> |2A<br /> |N/A<br /> |VERTICAL CARRIER PLATE-OUTER<br /> |<br /> |''Included with 80000002''<br /> |2<br /> |-<br /> |2B<br /> |N/A<br /> |VERTICAL CARRIER PLATE-INNER<br /> |<br /> |''Included with 80000002''<br /> |1<br /> |-<br /> |2C<br /> |N/A<br /> |CARRIER BASE PLATE<br /> |<br /> |''Included with 80000002''<br /> |1<br /> |-<br /> |3<br /> |HW1070<br /> |PIN-PULL DOWEL-5/8&quot; X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0508<br /> |BOLT-SHCS-1/2-13 X 3/4&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW1045<br /> |PIN-PULL DOWEL-3/8&quot; X 1 1/2&quot;<br /> |<br /> |''Included with 80000002''<br /> |6<br /> |-<br /> |6<br /> |HW0412<br /> |BOLT-SHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |''Included with 80000002''<br /> |12<br /> |-<br /> |7<br /> |H0010<br /> |FITTING-BULKHEAD-3/4-16 X #4 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |4<br /> |}<br /> [[File:BE-TS Extended Reach Rotary Actuator 2.png|alt=BE-TS Extended Reach Rotary Actuator |frameless|535x535px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PT0634<br /> |BRACKET-MALE END<br /> |<br /> |''Sols as a set''<br /> |1<br /> |-<br /> |2<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |10<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |PT0627<br /> |HOSE CARRIER<br /> |<br /> |''14 links required''<br /> |39&quot;<br /> |-<br /> |7<br /> |PT0634<br /> |BRACKET-FEMALE END<br /> |<br /> |''Sols as a set''<br /> |1<br /> |-<br /> |8<br /> |HC0262<br /> |VALVE-CROSS PORT RELIEF<br /> |<br /> |<br /> |1<br /> |-<br /> |8a<br /> |43046003<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''† For Item 8 (Not shown)''<br /> |2<br /> |-<br /> |9<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |H1546<br /> |ADAPTER-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |H1617<br /> |ADAPTER-45 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HC0237<br /> |VALVE-SEQUENCING<br /> |<br /> |<br /> |1<br /> |-<br /> |12a<br /> |43046005<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''† For Item 12 (Not shown)''<br /> |A/R<br /> |-<br /> |13<br /> |HW0317<br /> |BOLT-HHCS-1/4-20 X 3 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |H1560<br /> |ADAPTER-45 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |H1600<br /> |ADAPTER-90 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Cartridges are for replacement only''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Extended Reach (Rotary Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Extended Reach (Rotary Actuator).png|alt=BE-TS Magnet Extended Reach (Rotary Actuator)|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055011<br /> |ARM-EXTENSION-MAGNET<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0415<br /> |CYLINDER-EXTENDED REACH-MAGNET<br /> |<br /> |''2 1/2&quot; X 8&quot; Cylinder''<br /> |1<br /> |-<br /> |3<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JICM X #6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CLEVIS END<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-ROD END<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-EXTERNAL-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW1043<br /> |CLAMP-CYLINDER<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |43057044-2<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |43058019<br /> |SUPPORT-CABLE-BAND CLAMP<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> [[File:BE-TS Magnet Extended Reach (Rotary Actuator) 2.png|alt=BE-TS Magnet Extended Reach (Rotary Actuator) |frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055012<br /> |HOUSING-EXTENDED REACH-MAGNET<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |43058013<br /> |PLATE-BEARING-SIDE<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |43058016<br /> |PLATE-SHIM-SIDE<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |43058014<br /> |PLATE-BEARING-UPPER/LOWER<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43058015<br /> |PLATE-SHIM-UPPER/LOWER<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |24<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |24<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Extended Reach End Plate&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Extended Reach End Plate.png|alt=BE-TS Extended Reach End Plate|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |CARRIER SHAFT-EXTRACTOR ARM<br /> |<br /> |''† 3-Hole version''<br /> |A/R<br /> |-<br /> |2<br /> |PT0413<br /> |COLLAR-SHAFT-3&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |50057009<br /> |PLATE-END-3 HOLE<br /> |<br /> |''Replacement part only''<br /> |4<br /> |-<br /> |4<br /> |50057010<br /> |SHIM-END PLATE<br /> |<br /> |''†† See notes''<br /> |A/R<br /> |-<br /> |5<br /> |HW1076<br /> |BOLT-FHSCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |6<br /> |43057045<br /> |CARRIER SHAFT-EXTRACTOR ARM<br /> |<br /> |''1-Hole version''<br /> |2<br /> |-<br /> |7<br /> |43017076<br /> |PLATE-END-1 HOLE<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† 3-Hole Carrier Shaft no longer available. Must replace 3-Hole shaft with current, 1-Hole version along with new ennd plates &amp; hardware.'' <br /> |-<br /> | colspan=&quot;6&quot; |''†† Shim quantity varies due to manufacturing tolerances.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Carrier Shafts &amp; Bearings&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Carrier Shafts &amp; Bearings (Helical Actuator).png|alt=BE-TS Carrier Shafts &amp; Bearings (Helical Actuator)|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43057045<br /> |CARRIER SHAFT-EXTRACTOR ARM<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |2<br /> |43054007<br /> |BEARING-EXTRACTOR ARM CARRIER<br /> |80252002<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0412<br /> |BOLT-SHCS-3/8-16 X 1 1/4&quot;<br /> |80252002<br /> |<br /> |16<br /> |-<br /> |4<br /> |PT0413<br /> |COLLAR-SHAFT-3&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |50057010<br /> |SHIM-END PLATE<br /> |<br /> |<br /> |A/R<br /> |-<br /> |6<br /> |43017076<br /> |PLATE-END-1 HOLE<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |PT0624<br /> |FITTING-ZERK<br /> |80252002<br /> |''Not shown''<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Extended_Reach_End_Plate Extended Reach End Plate] section for Extended Reach equipped units.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Drive Nut Assembly (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Drive Nut Assembly (Helical Actuator).png|alt=BE-TS Drive Nut Assembly (Helical Actuator)|frameless|600x600px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43054006<br /> |DRIVE NUT ASSEMBLY<br /> |80252003<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0426<br /> |BOLT-SHCS-3/8-16 X 5 1/2&quot;<br /> |80252003<br /> |''† See notes''<br /> |4<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |80252003<br /> |''† See notes''<br /> |4<br /> |-<br /> |4<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |80252003<br /> |''† See notes''<br /> |4<br /> |-<br /> |5<br /> |PT0624<br /> |FITTING-ZERK<br /> |80252003<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† It is recommended to replce mounting hardware when replacing Drive Nut Assembly.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Swing Arms &amp; Actuator (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;[Discontinued] Helical Actuator&lt;/big&gt;''''' ====<br /> [[File:BE-TS Swing Arms &amp; Actuator (Helical Actuator).png|alt=BE-TS [Discontinued] Swing Arms &amp; Actuator (Helical Actuator)|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |HELICAL ACTUATOR<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |43057046<br /> |ACTUATOR BASE PLATE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43058022<br /> |SPACER-ACTUATOR<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0725<br /> |BOLT-HHCS-3/4-16 X 4-3/4&quot;-GR8<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0066<br /> |NUT-JAM-3/4-16-GR8<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43055013<br /> |SWING ARM-LHS<br /> |<br /> | rowspan=&quot;6&quot; |''†† See notes''<br /> |1<br /> |-<br /> |7<br /> |HW0620<br /> |BOLT-HHCS-5/8-11 X 1-1/4&quot;<br /> |<br /> |6<br /> |-<br /> |8<br /> |HW0013<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |6<br /> |-<br /> |9<br /> |43055014<br /> |SWING ARM-RHS<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1-1/4&quot;<br /> |<br /> |6<br /> |-<br /> |11<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |6<br /> |-<br /> |12<br /> |43042008<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |43042010<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE, LONG<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |H1619<br /> |ADAPTER-90 DEG-#6 JICM X #4 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |H0010<br /> |FITTING-H-BULKHEAD-1/4 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |H1504<br /> |ADAPTER-#6 JICM X #4 NPTM<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW1082<br /> |CLAMP-HOSE<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Discontinued Helical Actuator no longer available. Must replace with current Helical Actuator Retro Kit 80252032. See [Current] Helical Actuator.'' <br /> <br /> ''†† Swing arms manufactured prior to January 2022 use 10 bolts &amp; washers per Swing Arm.'' <br /> |}<br /> <br /> ==== '''''&lt;big&gt;[Current] Helical Actuator&lt;/big&gt;''''' ====<br /> [[File:BE-TS (Current) Swing Arms &amp; Actuator (Helical Actuator).png|alt=BE-TS (Current) Swing Arms &amp; Actuator (Helical Actuator)|frameless|544x544px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |N/A<br /> |43052020<br /> |HELICAL ACTUATOR ASSEMBLY<br /> |<br /> |''Includes Items 1 through 17''<br /> |1<br /> |-<br /> |1<br /> |HC0180<br /> |HELICAL ACTUATOR<br /> |80252032<br /> |<br /> |1<br /> |-<br /> |2<br /> |43057046<br /> |ACTUATOR BASE PLATE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43058022<br /> |SPACER-ACTUATOR<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0725<br /> |BOLT-HHCS-3/4-16 X 4-3/4&quot;-GR8<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0066<br /> |NUT-JAM-3/4-16-GR8<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43055013<br /> |SWING ARM-LHS<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0620<br /> |BOLT-HHCS-5/8-11 X 1-1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |8<br /> |HW0013<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |9<br /> |43055014<br /> |SWING ARM-RHS<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1-1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |11<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |12<br /> |43042011<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE, 90 DEG<br /> |80252032<br /> |''† See notes''<br /> |1<br /> |-<br /> |13<br /> |43042012<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE, SHORT<br /> |80252032<br /> |''† See notes''<br /> |1<br /> |-<br /> |14<br /> |H1619<br /> |ADAPTER-90 DEG-#6 JICM X #4 SAEM<br /> |80252032<br /> |<br /> |2<br /> |-<br /> |15<br /> |H0010<br /> |FITTING-H-BULKHEAD-1/4 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |H1504<br /> |ADAPTER-#6 JICM X #4 NPTM<br /> |80252032<br /> |<br /> |1<br /> |-<br /> |17<br /> |H1691<br /> |ADAPTER-45 DEG-#6 JICM X #4 NPTM<br /> |80252032<br /> |''† See notes''<br /> |1<br /> |-<br /> |18<br /> |HW1082<br /> |CLAMP-HOSE<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Hard-Pipes and 45 degree adapter required if replacing discontinued actuator with current Actuator Kit Part # 80252032 required for discontinued actuator replacement.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Swing Arm Stops &amp; Tie Plate&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Swing Arm Stops &amp; Tie Plate (Helical Actuator).png|alt=BE-TS Swing Arm Stops &amp; Tie Plate (Helical Actuator)|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43057050<br /> |TIE PLATE-HELICAL SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0113<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0010<br /> |NUT-JAM-5/8-11<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |43057052<br /> |STOP-POLY-SWING ARM<br /> |<br /> |''† See notes''<br /> |4<br /> |-<br /> |6<br /> |HW0441<br /> |BOLT-FHSCS-3/8-16 X 1-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW0031<br /> |NUT-LOCK-3/8-16, DEFORMED THREAD<br /> |<br /> |''† † See notes''<br /> |4<br /> |-<br /> |8<br /> |44555002<br /> |SWING ARM STOP<br /> |<br /> |''Single compartment use only''<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Replacement Poly Stop design updated from Square to Round. Stop Spacers not required with current, Round-Style Stops.''<br /> |-<br /> | colspan=&quot;6&quot; |''† † Deformed Thread Lock Nut replaces Acorn Nut and Split Lock Washer used previously.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Push/Pull Arm Mounting (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Push-Pull Arm Mounting.png|alt=BE-TS Push-Pull Arm Mounting (Helical Actuator)|frameless|542x542px]]<br /> {| class=&quot;wikitable&quot;<br /> ! rowspan=&quot;2&quot; |ITEM<br /> ! rowspan=&quot;2&quot; |BHS PART NUMBER<br /> ! rowspan=&quot;2&quot; |DESCRIPTION<br /> ! rowspan=&quot;2&quot; |REF. KIT NO.<br /> ! rowspan=&quot;2&quot; |NOTES<br /> ! colspan=&quot;3&quot; |NO. REQ<br /> |-<br /> !BE-24<br /> !BE-36<br /> !BE-42<br /> |-<br /> | rowspan=&quot;2&quot; |1<br /> |41655008<br /> |EXTENSION-ARM<br /> |<br /> |''†BE-36 units only''<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |1<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |43455001<br /> |EXTENSION-ARM<br /> |<br /> |''†BE-42 units only''<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |1<br /> |-<br /> |2<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> | colspan=&quot;2&quot; |12<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |12<br /> | colspan=&quot;2&quot; |24<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> | colspan=&quot;2&quot; |12<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |6<br /> | colspan=&quot;2&quot; |12<br /> |-<br /> ! colspan=&quot;8&quot; |NOTES<br /> |-<br /> | colspan=&quot;8&quot; |''† BE-24 units do not utilize an Arm Extension.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Extractor Arm (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Non-Pivoting Vacuum Cup Arm (Helical Actuator)&lt;/big&gt;''''' ====<br /> [[File:BE-TS Non-Pivoting Vacuum Cup Arm (Helical Actuator).png|alt=BE-TS Non-Pivoting Vacuum Cup Arm (Helical Actuator)|frameless|578x578px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0428<br /> |STUD-VACUUM-3/8-16 X 5&quot;<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |2<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |HW-KIT-2<br /> |<br /> |40<br /> |-<br /> |3<br /> |HW1001<br /> |SPRING-3/8&quot;<br /> |HW-KIT-2<br /> |<br /> |24<br /> |-<br /> |4<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0424<br /> |NUT-JAM-3/8-16<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |6<br /> |P0402<br /> |HOSE BARB-1/4&quot; X #4 MNPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |REF<br /> |43052014<br /> |ADJUSTABLE PUSH-PULL ARM<br /> |<br /> |''Includes Items 7 through 11''<br /> |A/R<br /> |-<br /> |7<br /> |43055018<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |43055019<br /> |VACUUM CUP MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Pivoting Vacuum Cup Arm (Helical Actuator)&lt;/big&gt;''''' ====<br /> [[File:BE-TS Pivoting Vacuum Cup Arm (Helical Actuator).png|alt=BE-TS Pivoting Vacuum Cup Arm (Helical Actuator)|frameless|525x525px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43052014<br /> |ADJUSTABLE PUSH-PULL ARM<br /> |<br /> |''Includes Items 1 through 5''<br /> |A/R<br /> |-<br /> |1<br /> |43055018<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43055019<br /> |VACUUM CUP MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |43055020<br /> |MOUNT-PIVOT-VACUUM CUP<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |PT0470<br /> |BEARING-PIVOT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0525<br /> |BOLT-CARRIAGE-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |9<br /> |HW0524<br /> |BOLT-CARRIAGE-1/2-13 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |11<br /> |HW0008<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |16<br /> |-<br /> |12<br /> |43058009<br /> |PLATE-ROTATION STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |43058003<br /> |SLEEVE-STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |43058010<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |4<br /> |-<br /> |16<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |43037002-2<br /> |SUPPORT-CABLE RESTRAINT<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |21<br /> |P0506<br /> |ELBOW-STR-90 DEG-#4 NPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |22<br /> |P0402<br /> |HOSE BARB-1/4&quot; X #4 MNPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |23<br /> |43057056-2<br /> |BRACKET-HOSE SUPPORT<br /> |<br /> |<br /> |2<br /> |-<br /> |24<br /> |PL0507<br /> |GROMMET-5/8&quot; I.D.<br /> |<br /> |<br /> |2<br /> |-<br /> |25<br /> |P0302<br /> |HOSE-VACUUM-1/4&quot; I.D.<br /> |<br /> |''2 pieces at 48&quot; each''<br /> |96&quot;<br /> |-<br /> |26<br /> |HW0443<br /> |BOLT-HHCS-3/8-16 X 3-1/2&quot;<br /> |HW-KIT-3<br /> |<br /> |8<br /> |-<br /> |27<br /> |HW1001<br /> |SPRING-3/8&quot;<br /> |HW-KIT-3<br /> |<br /> |16<br /> |-<br /> |28<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |HW-KIT-3<br /> |<br /> |32<br /> |-<br /> |29<br /> |HW0424<br /> |NUT-JAM-3/8-16<br /> |HW-KIT-3<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Cup Rotation Stop (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Vacuum Cup Rotation Stop (Helical Actuator).png|alt=BE-TS Vacuum Cup Rotation Stop (Helical Actuator)|frameless|583x583px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |445558001<br /> |PLATE-ROTATION STOP<br /> |<br /> |''† Single compartment units only''<br /> |2<br /> |-<br /> |2<br /> |HW0525<br /> |BOLT-CARRIAGE-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0524<br /> |BOLT-CARRIAGE-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0008<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Components (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Vacuum Components (Helical Actuator).png|alt=BE-TS Vacuum Components (Helical Actuator)|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43058021<br /> |STIFFENER PLATE-HELICAL SWING ARM<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |24<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |5<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |12<br /> |-<br /> |6<br /> |P0005<br /> |PUMP-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |P0207<br /> |VALVE-VACUUM RELEASE<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |P0208<br /> |FILTER-HI FLOW<br /> |<br /> |<br /> |3<br /> |-<br /> |9<br /> |H0011<br /> |NIPPLE-#4 X 2&quot;-BRASS<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |P0502<br /> |TEE-#4 FNPT-BRASS<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |P0506<br /> |ELBOW-STR-90 DEG-#4 NPT-BRASS<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |P0503<br /> |NIPPLE-#4 NPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |P0402<br /> |HOSE BARB-1/4&quot; X #4 MNPT-BRASS<br /> |<br /> |<br /> |6<br /> |-<br /> |14<br /> |P0111<br /> |FILTER-VACUUM-IN-LINE<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0206<br /> |SCREW-RHMS-#10-32 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |43037014-2<br /> |BRACKET-CABLE RESTRAINT<br /> |<br /> |<br /> |1<br /> |-<br /> |17<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |18<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |21<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |22<br /> |E0624<br /> |CONNECTOR-1/2&quot;<br /> |<br /> |''Includes Lock Nut''<br /> |1<br /> |-<br /> |23<br /> |HW0212<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Arm (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Arm (Helical Actuator).png|alt=BE-TS Magnet Arm (Helical Actuator)|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43052014<br /> |ADJUSTABLE PUSH-PULL ARM<br /> |<br /> |''Includes Items 1 through 5''<br /> |A/R<br /> |-<br /> |1<br /> |43055018<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43055019<br /> |VACUUM CUP MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |43055016<br /> |MOUNT-PIVOT-MAGNET<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |PT0470<br /> |BEARING-PIVOT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0525<br /> |BOLT-CARRIAGE-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |9<br /> |HW0524<br /> |BOLT-CARRIAGE-1/2-13 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |11<br /> |HW0008<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |16<br /> |-<br /> |12<br /> |43058009<br /> |PLATE-ROTATION STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |43058003<br /> |SLEEVE-STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |43058010<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |18<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |43037002-2<br /> |SUPPORT-CABLE RESTRAINT<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |21<br /> |E0334-6'<br /> |CORD-5 PIN FEMALE<br /> |<br /> |''With 72&quot; lead''<br /> |2<br /> |-<br /> |22<br /> |E1041<br /> |WIRE LOOM-SPIRAL-3/8&quot;<br /> |<br /> |''2 pieces at 24&quot; each''<br /> |48&quot;<br /> |-<br /> |23<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |2<br /> |-<br /> |24<br /> |43057037<br /> |INSULATOR-BOTTOM<br /> |<br /> |<br /> |2<br /> |-<br /> |25<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |26<br /> |41657008<br /> |SLIDE-MAGNET<br /> |<br /> |<br /> |2<br /> |-<br /> |27<br /> |HW0314<br /> |BOLT-FHSCS-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Assembly (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Assembly (Helical Actuator).png|alt=BE-TS Magnet Assembly (Helical Actuator)|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43032009<br /> |MAGNET ASSEMBLY<br /> |<br /> |''Includes Items 1 through 12''<br /> |A/R<br /> |-<br /> |1<br /> |N/A<br /> |ELECTROMAGNET-95VDC<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |E0314<br /> |SENSOR-PROXIMITY-30MM<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |41657002<br /> |COVER-PROXIMITY SENSOR HOUSING<br /> |<br /> |''Rear''<br /> |2<br /> |-<br /> |4<br /> |HW1065<br /> |SCREW-SHCS-#6-32 X 3/8&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW1066<br /> |WASHER-LOCK-#6<br /> |<br /> |<br /> |8<br /> |-<br /> |6<br /> |E0335<br /> |RECEPTACLE-5 PIN MALE<br /> |<br /> |''With 12&quot; lead''<br /> |2<br /> |-<br /> |7<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |E0376<br /> |INDICATOR LIGHT<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |9<br /> |41657003<br /> |COVER-PROXIMITY SENSOR HOUSING<br /> |80252015<br /> |''Front''<br /> |2<br /> |-<br /> |10<br /> |HW0138<br /> |SCREW-FHSCS-#8-32 X 3/8&quot;<br /> |80252015<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |80252014<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW1002<br /> |SPRING-1/2&quot;<br /> |80252014<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |80252014<br /> |<br /> |8<br /> |-<br /> |14<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |80252014<br /> |<br /> |4<br /> |-<br /> |15<br /> |E0336<br /> |METAL OXIDE VARISTOR<br /> |<br /> |''Not shown''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Extractors built or replacement magnets shipped prior to October 2021 used Multi-Piece Indicator Lights with replaceable bulb and lens and are no longer available. Current Indicator Light is a 1-Piece LED assembly. Replacement of any Multi-Piece component requires replacing entire assembly with current, 1-Piece Indicator Light.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Components (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Components (Helical Actuator).png|alt=BE-TS Magnet Components (Helical Actuator)|frameless|534x534px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43058021<br /> |STIFFENER PLATE-HELICAL SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43057051-2<br /> |STIFFENER-MAGNET-HELICAL SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |4<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |24<br /> |-<br /> |5<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |6<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |12<br /> |-<br /> |7<br /> |PL0307<br /> |INSULATOR-MALE STUD<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0106<br /> |WASHER-FLAT-5/16&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |HW0105<br /> |WASHER-LOCK-5/16&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0004<br /> |NUT-HEX-5/16-18<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |12<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |13<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |14<br /> |E1016<br /> |FUSE HOLDER<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |E0325<br /> |FUSE-7 AMP-250VAC<br /> |<br /> |''FLM-7 or FNM-7''<br /> |1<br /> |-<br /> |16<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |17<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Panel (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Panel (Helical Actuator).png|alt=BE-TS Magnet Panel (Helical Actuator)|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41637001<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41637002<br /> |WIRE WAY-SHORT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |41637003<br /> |WIRE WAY-LONG<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |41637004<br /> |TRACK-MOUNTING-SHORT<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |41637005<br /> |TRACK-MOUNTING-LONG<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> | rowspan=&quot;3&quot; |''Mounting track hardware (Not shown)''<br /> |10<br /> |-<br /> |7<br /> |HW0132<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |10<br /> |-<br /> |8<br /> |HW0133<br /> |NUT-NILN-#8-32<br /> |<br /> |16<br /> |-<br /> |9<br /> |E1020<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |12<br /> |-<br /> |10<br /> |E1040<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |E1330<br /> |END ANCHOR<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |E1009<br /> |RECTIFIER-FULL WAVE BRIDGE<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |HW0135<br /> |SCREW-RHMS-#8-32 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |E1313<br /> |SOCKET-RELAY-8 PIN<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |E0331<br /> |RELAY-DPDT-110VAC<br /> |<br /> |''With Indicator Light''<br /> |2<br /> |-<br /> |16<br /> |HW0139<br /> |SCREW-RHMS-#8-32 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Extended Reach Hydraulics (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== &lt;big&gt;''[Discontinued] Helical Actuator''&lt;/big&gt; ====<br /> [[File:BE-TS (Discontinued) Helical Actuator.png|alt=BE-TS (Discontinued) Helical Actuator|frameless|546x546px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43042009<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |H0010<br /> |FITTING-BULKHEAD-3/4-16 X #4 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |43055017<br /> |ELBOW-BULKHEAD<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> | rowspan=&quot;3&quot; |7<br /> |4-48-0402-0402<br /> |HYD HOSE-1/4&quot; X 48&quot; (BE-24 UNITS)<br /> |<br /> | rowspan=&quot;3&quot; |''Cylinder rod-end hose''<br /> | rowspan=&quot;3&quot; |1<br /> |-<br /> |4-54-0402-0402<br /> |HYD HOSE-1/4&quot; X 54&quot; (BE-36 UNITS)<br /> |<br /> |-<br /> |4-56-0402-0402<br /> |HYD HOSE-1/4&quot; X 56&quot; (BE-42 UNITS)<br /> |<br /> |-<br /> | rowspan=&quot;3&quot; |8<br /> |4-38-0402-0402<br /> |HYD HOSE-1/4&quot; X 38&quot; (BE-24 UNITS)<br /> |<br /> | rowspan=&quot;3&quot; |''Cylinder rod-end hose''<br /> | rowspan=&quot;3&quot; |1<br /> |-<br /> |4-44-0402-0402<br /> |HYD HOSE-1/4&quot; X 44&quot; (BE-36 UNITS)<br /> |<br /> |-<br /> |4-46-0402-0402<br /> |HYD HOSE-1/4&quot; X 46&quot; (BE-42 UNITS)<br /> |<br /> |-<br /> |9<br /> |41257035<br /> |STANDOFF-HOSE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW1093<br /> |CLAMP-CABLE-3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0311<br /> |BOLT-FHSCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> ==== &lt;big&gt;''[Current] Helical Actuator''&lt;/big&gt; ====<br /> [[File:BE-TS (Current) Helical Actuator.png|alt=BE-TS (Current) Helical Actuator|frameless|567x567px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43042013<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |H0010<br /> |FITTING-BULKHEAD-3/4-16 X #4 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |43055021<br /> |ELBOW-BULKHEAD<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> | rowspan=&quot;3&quot; |7<br /> |4-48-0402-0402<br /> |HYD HOSE-1/4&quot; X 48&quot; (BE-24 UNITS)<br /> |<br /> | rowspan=&quot;3&quot; |''Cylinder rod-end hose''<br /> | rowspan=&quot;3&quot; |1<br /> |-<br /> |4-54-0402-0402<br /> |HYD HOSE-1/4&quot; X 54&quot; (BE-36 UNITS)<br /> |<br /> |-<br /> |4-56-0402-0402<br /> |HYD HOSE-1/4&quot; X 56&quot; (BE-42 UNITS)<br /> |<br /> |-<br /> | rowspan=&quot;3&quot; |8<br /> |4-38-0402-0402<br /> |HYD HOSE-1/4&quot; X 38&quot; (BE-24 UNITS)<br /> |<br /> | rowspan=&quot;3&quot; |''Cylinder rod-end hose''<br /> | rowspan=&quot;3&quot; |1<br /> |-<br /> |4-44-0402-0402<br /> |HYD HOSE-1/4&quot; X 44&quot; (BE-36 UNITS)<br /> |<br /> |-<br /> |4-46-0402-0402<br /> |HYD HOSE-1/4&quot; X 46&quot; (BE-42 UNITS)<br /> |<br /> |-<br /> |9<br /> |41257035<br /> |STANDOFF-HOSE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW1093<br /> |CLAMP-CABLE-3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0311<br /> |BOLT-FHSCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Extended Reach (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== &lt;big&gt;'''''Non-Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator)'''''&lt;/big&gt; ====<br /> [[File:BE-TS Non-Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator).png|alt=BE-TS Non-Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator)|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41255005<br /> |ARM-EXTENSION<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41255004<br /> |HOUSING-EXTENDED REACH<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0416<br /> |CYLINDER-2 1/2&quot; X 12&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CYLINDER-REAR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-CYLINDER-ROD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JIC X # 6 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |28<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |28<br /> |-<br /> |15<br /> |41258002<br /> |PLATE-BEARING<br /> |80258001<br /> |''Side''<br /> |2<br /> |-<br /> |16<br /> |41258005<br /> |PLATE-SHIM<br /> |80258001<br /> |''Side''<br /> |2<br /> |-<br /> |17<br /> |41258003<br /> |PLATE-BEARING<br /> |80258001<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |18<br /> |41258004<br /> |PLATE-SHIM<br /> |80258001<br /> |''Upper / lower''<br /> |2<br /> |}<br /> &lt;big&gt;'''''Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator)'''''&lt;/big&gt;<br /> <br /> [[File:BE-TS Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator).png|alt=BE-TS Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator)|frameless|553x553px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055011<br /> |ARM-EXTENSION<br /> |<br /> |''Pivoting cup only''<br /> |1<br /> |-<br /> |2<br /> |43055012<br /> |HOUSING-EXTENDED REACH<br /> |<br /> |''Pivoting cup only''<br /> |1<br /> |-<br /> |3<br /> |HC0415<br /> |CYLINDER-2 1/2&quot; X 8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CYLINDER-REAR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-CYLINDER-ROD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JIC X # 6 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |24<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |24<br /> |-<br /> |15<br /> |43058013<br /> |PLATE-BEARING<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |16<br /> |43058016<br /> |PLATE-SHIM<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |17<br /> |43058014<br /> |PLATE-BEARING<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |18<br /> |43058015<br /> |PLATE-SHIM<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |19<br /> |HW1043<br /> |CLAMP-CYLINDER<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |43058019<br /> |SUPPORT-CABLE-BAND CLAMP<br /> |<br /> |<br /> |2<br /> |-<br /> |21<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |22<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |23<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |24<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Extended Reach (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== &lt;big&gt;'''''[Discontinued] Extended Reach Magnet Arm (Helical Actuator)'''''&lt;/big&gt; ====<br /> [[File:BE-TS (Discontinued) Extended Reach Magnet Arm (Helical Actuator).png|alt=BE-TS (Discontinued) Extended Reach Magnet Arm (Helical Actuator)|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055011<br /> |ARM-EXTENSION<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43055012<br /> |HOUSING-EXTENDED REACH<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0415<br /> |CYLINDER-2 1/2&quot; X 8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CYLINDER-REAR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-CYLINDER-ROD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JIC X # 6 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |24<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |24<br /> |-<br /> |15<br /> |43058013<br /> |PLATE-BEARING<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |16<br /> |43058016<br /> |PLATE-SHIM<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |17<br /> |43058014<br /> |PLATE-BEARING<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |18<br /> |43058015<br /> |PLATE-SHIM<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |19<br /> |HW1043<br /> |CLAMP-CYLINDER<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |43058019<br /> |SUPPORT-CABLE-BAND CLAMP<br /> |<br /> |<br /> |2<br /> |-<br /> |21<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |24<br /> |43057004-2<br /> |SUPPORT-CABLE-MAGNET<br /> |<br /> |<br /> |2<br /> |}<br /> &lt;big&gt;'''''[Current] Extended Reach Magnet Arm (Helical Actuator)'''''&lt;/big&gt;<br /> <br /> [[File:BE-TS (Current) Extended Reach Magnet Arm (Helical Actuator).png|alt=BE-TS (Current) Extended Reach Magnet Arm (Helical Actuator)|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |50055004<br /> |ARM-EXTENSION<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |50055005<br /> |HOUSING-EXTENDED REACH<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0415<br /> |CYLINDER-2 1/2&quot; X 8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CYLINDER-REAR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-CYLINDER-ROD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JIC X # 6 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |20<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |20<br /> |-<br /> |15<br /> |50058009<br /> |PLATE-BEARING<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |16<br /> |50058012<br /> |PLATE-SHIM<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |17<br /> |50058010<br /> |PLATE-BEARING<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |18<br /> |50058011<br /> |PLATE-SHIM<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |19<br /> |HW1043<br /> |CLAMP-CYLINDER<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |43058019<br /> |SUPPORT-CABLE-BAND CLAMP<br /> |<br /> |<br /> |2<br /> |-<br /> |21<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |24<br /> |43057004-2<br /> |SUPPORT-CABLE-MAGNET<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> == &lt;big&gt;Drive and Idler Wheels&lt;/big&gt; ==<br /> <br /> === &lt;big&gt;&lt;u&gt;Drive Wheel Mounting&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Drive Wheel Mounting.png|alt=BE-TS Drive Wheel Mounting|frameless|519x519px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0503<br /> |BOLT-HHCS-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |2<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |''Cylinder Bracket bolt only''<br /> |2<br /> |-<br /> |3<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> === &lt;big&gt;&lt;u&gt;Drive Wheel Motors&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Drive Wheel Motors.png|alt=BE-TS Drive Wheel Motors|frameless|535x535px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;2&quot; |1<br /> |43822001-6B<br /> |FLOOR DRIVE ASSEMBLY (W/ 200CC MOTOR)<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |43822004-6B<br /> |FLOOR DRIVE ASSEMBLY (W/ 400CC MOTOR)<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |2<br /> |43827004<br /> |PLATE-MOTOR MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0416<br /> |BOLT-SHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |H1612<br /> |ADAPTER-90 DEG-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |N/A<br /> |ROD-THREADED-1/2-13 X 7 3/4&quot;<br /> |<br /> |''†† See notes''<br /> |8<br /> |-<br /> |7<br /> |N/A<br /> |SPACER-DRIVE WHEEL-4.75&quot; LG<br /> |<br /> |''†† See notes''<br /> |8<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |43827006<br /> |SPACER-DRIVE WHEEL-4.125&quot; LG<br /> |<br /> |Must be ordered as a set of 4<br /> |8<br /> |-<br /> |11<br /> |HW0516<br /> |BOLT-HHCS-1/2-13 X 6 1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |12<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> | rowspan=&quot;2&quot; |13<br /> |N/A<br /> |MOTOR-HYDRAULIC-200CC<br /> |<br /> |''††† Keyed Shaft''<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |N/A<br /> |MOTOR-HYDRAULIC-400CC<br /> |<br /> |''††† Keyed Shaft''<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |14<br /> |HW1071<br /> |KEY-WOODRUFF-#808 STD<br /> |<br /> |<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |15<br /> |HC0124-6B<br /> |MOTOR-HYDRAULIC-200CC<br /> |<br /> |''† Spline Shaft''<br /> |2<br /> |-<br /> |HC0126-6B<br /> |MOTOR-HYDRAULIC-400CC<br /> |80322003<br /> |''† Spline Shaft''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† 200CC Motors required for units equipped with Parallel Drive Circuit.''<br /> ''400CC Motors required for units equipped with Series Drive Circuit.''<br /> <br /> ''See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Cross_Port_Relief Cross Port Relief] section to determine if unit is Parallel or Series equipped and approximate effectivity of each type.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Parts obsolete and no longer available. Must replace with Items 10 &amp; 11.''<br /> |-<br /> | colspan=&quot;6&quot; |''††† Parts obsolete and no longer available. Must replace with Spline Drive Conversion Kit.''<br /> |}<br /> <br /> === &lt;big&gt;&lt;u&gt;Drive Wheel Bearings&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Drive Wheel Bearings.png|alt=BE-TS Drive Wheel Bearings|frameless|537x537px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43825001<br /> |FRAME-FLOOR DRIVE<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |C0510-1<br /> |WHEEL-10&quot; X 5&quot;-POLY<br /> |80322001<br /> |<br /> |2<br /> |-<br /> |3<br /> |43822003<br /> |SHAFT-WHEEL (W/ COUPLING BODY)<br /> |<br /> |''Available in multiple kits''<br /> |2<br /> |-<br /> |4<br /> |43897004<br /> |KEY-3/8&quot; X 4 3/4&quot;<br /> |80322001<br /> |<br /> |2<br /> |-<br /> |5<br /> |PT0430<br /> |FLANGE BEARING-4 BOLT-1 1/2&quot;<br /> |80322001<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |7<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |16<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |9<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |16<br /> |-<br /> |10<br /> |PT0321<br /> |CHAIN-COUPLING-#50<br /> |<br /> |''Includes connecting pin''<br /> |2<br /> |-<br /> |11<br /> |N/A<br /> |COUPLING BODY-TAPER BORE-#50<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |12<br /> |N/A<br /> |BUSHING-TAPER LOCK-1&quot;<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |13<br /> |HW0323<br /> |BOLT-HHCS-5/16-18 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |14<br /> |PT0330<br /> |COUPLING BODY-#50-SPLINE BORE<br /> |80322003<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW1110<br /> |RETAINING RING-1 1/2&quot;-HEAVY DUTY<br /> |<br /> |''†† Available in multiple kits''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Parts obsolete and no longer available. Spline Drive Conversion Kit required. Reuse of bushing after disassembly not recommended.'' <br /> |-<br /> | colspan=&quot;6&quot; |''† † Retaining Rings used on units shipped after 7/01/12. Units shipped from 7/01/13 are equipped with (2) Retaining Rings per shaft - (1) on each side of the wheel. Units shipped after 11/01/13 are equipped with only (1) Snap Rings as shown. Second Snap Ring is no longer used or required.''<br /> |-<br /> | colspan=&quot;6&quot; |''NOTE: Effectivity dates refer to dates new extractor units are shipped from the factory. Replacement part effectivity &lt;u&gt;'''may'''&lt;/u&gt; differ due to factory inventory levels at time of parts order. Consult factory if unsure of parts needed.''<br /> |}<br /> <br /> === &lt;big&gt;&lt;u&gt;Drive Wheel Assembly&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Drive Wheel Assembly.png|alt=BE-TS Drive Wheel Assembly|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43822005<br /> |RADIAL PISTON DRIVE WHEEL ASSEMBLY<br /> |<br /> |''Includes Items 1 through 6''<br /> |2<br /> |-<br /> |1<br /> |43825003<br /> |RADIAL PISTON DRIVE WHEEL MOUNT<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0160-1<br /> |400CC RADIAL PISTON MOTOR<br /> |<br /> |''Includes nuts &amp; studs''<br /> |1<br /> |-<br /> |REF<br /> |HC0160-STUD<br /> |STUD-M14-1.5 X 46MM<br /> |<br /> |''Replacement motor stud''<br /> |A/R<br /> |-<br /> |REF<br /> |HC0160-NUT<br /> |NUT-FLANGED HEX-M14-1.5<br /> |<br /> |''Replacement motor nut''<br /> |A/R<br /> |-<br /> |3<br /> |C0511<br /> |WHEEL-POLY-10 X 5&quot;-FLANGE MOUNT<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |5<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |6<br /> |-<br /> |7<br /> |H1612<br /> |ADAPTER-H-90 DEG-#10 SAEM X #8 JICM<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |H1539<br /> |ADAPTER-#8 JIC X #6 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1586<br /> |ADAPTER-90 DEG-#8 JICSW X #6 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |H0801<br /> |TEE-H-#6 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H1501<br /> |ADAPTER-#8 JIC X #6 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |H0200<br /> |REDUCER-#6 NPT X #4 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |H0206<br /> |PLUG-#4 NPT<br /> |<br /> |''† Left Drive Wheel only''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Plug used on Left Drive Wheel Assembly only. Hose from Left Drive Wheel Assembly is connected to tee on Right Drive Wheel Assembly.'' <br /> |}<br /> <br /> === &lt;big&gt;&lt;u&gt;Idler Casters&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Idler Casters.png|alt=BE-TS Idler Casters|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |C0500-1<br /> |CASTER-RIGID-10&quot; X 5&quot;-POLY<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |3<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |<br /> |''For Cylinder Bracket position'' <br /> |2<br /> |-<br /> |4<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |16<br /> |-<br /> |5<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |6<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> == &lt;big&gt;Electrical&lt;/big&gt; ==<br /> <br /> === &lt;u&gt;&lt;big&gt;AC Power Stanchion&lt;/big&gt;&lt;/u&gt; ===<br /> <br /> ==== &lt;big&gt;''Aero-Motive Energy Rail''&lt;/big&gt; ====<br /> [[File:BE-TS Aero-Motive Energy Rail.png|alt=BE-TS Aero-Motive Energy Rail|frameless|536x536px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43835001<br /> |STANCHION-POWER<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0511<br /> |BOLT-HHCS-1/2-13 X 3 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |46837014-2<br /> |TOW ARM-COLLECTOR TROLLEY<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |46838015<br /> |SPACER BLOCK-TOW ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW1030<br /> |U-BOLT-3/8-16 X 2&quot; X 5&quot;-SQUARE BEND<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .625&quot; to .750&quot;''<br /> |1<br /> |-<br /> |13<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |HW1051<br /> |EYE BOLT-3/8-16 X 5 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0126<br /> |WASHER-FLAT-3/8&quot;-FENDER<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |BD0010<br /> |TROLLEY-ENERGY RAIL<br /> |<br /> | rowspan=&quot;2&quot; |''Aero-Motive Rail only''<br /> <br /> ''(orange housing color)''<br /> |1<br /> |-<br /> |19<br /> |BD0100<br /> |BRUSH-TROLLEY<br /> |<br /> |4<br /> |}<br /> <br /> ==== '''&lt;big&gt;''Vahle Energy Rail''&lt;/big&gt;''' ====<br /> [[File:BE-TS Vahle Energy Rail.png|alt=BE-TS Vahle Energy Rail|frameless|535x535px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1A<br /> |BD0031<br /> |TROLLEY-ENERGY RAIL, KSL<br /> |<br /> | rowspan=&quot;3&quot; |''† Vahle KSL Rail only''<br /> <br /> ''(green housing color)''<br /> |1<br /> |-<br /> |2A<br /> |BD0040<br /> |BRUSH-PHASE, KSL<br /> |<br /> |3<br /> |-<br /> |3A<br /> |BD0041<br /> |BRUSH-GROUND, KSL<br /> |<br /> |1<br /> |-<br /> |1B<br /> |BD0231<br /> |TROLLEY-ENERGY RAIL, KBH<br /> |<br /> | rowspan=&quot;3&quot; |''† Vahle KBH Rail only''<br /> <br /> ''(gray housing color)''<br /> <br /> ''(Nots shown)''<br /> |1<br /> |-<br /> |2B<br /> |BD0240<br /> |BRUSH-PHASE, KBH<br /> |<br /> |3<br /> |-<br /> |3B<br /> |BD0241<br /> |BRUSH-GROUND, KBH<br /> |<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |4<br /> |BD0030<br /> |TOW ARM-COLLECTOR TROLLEY, KSL<br /> |<br /> |''† Vahle KSL Rail only''<br /> <br /> ''(green housing color)''<br /> |1<br /> |-<br /> |BD0230<br /> |TOW ARM-COLLECTOR TROLLEY, KBH<br /> |<br /> |''† Vahle KBH Rail only''<br /> <br /> ''(gray housing color)''<br /> |1<br /> |-<br /> |5<br /> |46838015<br /> |SPACER-BLOCK-TOW ARM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |6<br /> |41237083-2<br /> |BRACKET-TOW ARM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |7<br /> |HW1054<br /> |U-BOLT-5/16-18 X 2&quot; X 5&quot;-SQUARE BEND<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW0323<br /> |BOLT-HHCS-5/16-18 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0106<br /> |WASHER-FLAT-5/16&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0150<br /> |WASHER-FLAT-5/16&quot;-FENDER<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0105<br /> |WASHER-LOCK-5/16&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0004<br /> |NUT-HEX-5/16-18<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Verify Energy Rail type (KSL OR KBH) by the color of the energy rail housing.'' <br /> |-<br /> | colspan=&quot;6&quot; |''†† Not all units equipped with Tow Arm Bracket. Location of Spacer Block and/or Tow Arm Bracket may vary from configuration shown.'' <br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Control Panel&lt;/big&gt;&lt;/u&gt;''' ===<br /> '''&lt;big&gt;''[Discontinued] Control Panel for Units with 10 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS (Discontinued) Control Panel for Units with 10HP.png|alt=BE-TS (Discontinued) Control Panel for Units with 10HP|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-CONTROL PANEL-16&quot; X 14&quot; X 6&quot;<br /> |<br /> |CONSULT FACTORY<br /> |1<br /> |-<br /> |2<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |Grip size .250&quot; to.375&quot;<br /> |1<br /> |-<br /> |6<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |Grip size .625&quot; to .750&quot;<br /> |2<br /> |-<br /> |7<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |Grip size .500&quot; to .625&quot;<br /> |2<br /> |-<br /> |8<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |''Not shown''<br /> |1<br /> |-<br /> |9<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |''Not shown''<br /> |4<br /> |}<br /> [[File:BE-TS (Discontinued) Control Panel for Units with 10HP Detail.png|alt=BE-TS (Discontinued) Control Panel for Units with 10HP Detail|frameless|556x556px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0640<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |BLANK PANEL WITHOUT HOLES<br /> |1<br /> |-<br /> |2<br /> |E0120<br /> |MAGNETIC STARTER-NEMA 1 3/4&quot;<br /> |<br /> |WITH OVERLOAD<br /> |1<br /> |-<br /> |3<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |<br /> |17<br /> |-<br /> |4<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |<br /> |17<br /> |-<br /> |5<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |17<br /> |-<br /> |6<br /> |E0207-1<br /> |TRANSFORMER<br /> |<br /> |480VAC TO 120VAC, 0.75 Kva<br /> |1<br /> |-<br /> |7<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |HW0003<br /> |NUT-NILN-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |E1023<br /> |WIREWAY<br /> |<br /> |SOLD BY LENGTH<br /> |A/R<br /> |-<br /> |11<br /> |E1024<br /> |MOUNTING TRACK<br /> |<br /> |SOLD BY LENGTH<br /> |A/R<br /> |-<br /> |12<br /> |E1020<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |16<br /> |-<br /> |13<br /> |E1040<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |E1330<br /> |END ANCHOR<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |E0341<br /> |GROUND LUG<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |E0902<br /> |FUSE-6A<br /> |<br /> |FLM-6<br /> |1<br /> |}<br /> <br /> ==== '''&lt;big&gt;''[Current] Control Panel for Units with 20 HP Power Unit''&lt;/big&gt;''' ====<br /> [[File:BE-TS (Current) Control Panel for Units with 20HP.png|alt=BE-TS (Current) Control Panel for Units with 20HP|frameless|601x601px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-24&quot; X 16&quot; X 6&quot;<br /> |<br /> |CONSULT FACTORY<br /> |1<br /> |-<br /> |2<br /> |E0123-1<br /> |HANDLE-DISCONNECT<br /> |<br /> |INCL. MOUNTING SCREWS<br /> |1<br /> |-<br /> |3<br /> |E0662<br /> |RESTRAINT-3/4&quot;-LIQUID TIGHT<br /> |<br /> |INCL. LOCKNUT<br /> |1<br /> |-<br /> |4<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |GRIP SIZE .500&quot; TO .625&quot;<br /> |2<br /> |-<br /> |5<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |GRIP SIZE .625&quot; TO .750&quot;<br /> |1<br /> |-<br /> |6<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |7<br /> |E0661<br /> |RESTRAINT-3/4&quot;-90 DEG-LIQUID TIGHT<br /> |<br /> |INCL. LOCKNUT<br /> |1<br /> |-<br /> |8<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |GRIP SIZE .250&quot; TO .375&quot;<br /> |1<br /> |-<br /> |9<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |GRIP SIZE .450&quot; TO .560&quot;<br /> |2<br /> |-<br /> |10<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |11<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |}<br /> [[File:BE-TS (Current) Control Panel for Units with 20HP Details.png|alt=BE-TS (Current) Control Panel for Units with 20HP Details|frameless|645x645px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |YE0506<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |''Blank panel without holes''<br /> |1<br /> |-<br /> |2<br /> |YE0205-1<br /> |SWITCH-DISCONNECT-80A<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43036007<br /> |SHAFT-DISCONNECT<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |YE0409<br /> |FUSE HOLDER-SINGLE POLE<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |E0914<br /> |FUSE-10A<br /> |<br /> |''FLM-10''<br /> |1<br /> |-<br /> |6<br /> |E0902<br /> |FUSE-6A<br /> |<br /> |''FLM-6''<br /> |1<br /> |-<br /> |7<br /> |E0903<br /> |FUSE-12A<br /> |<br /> |''FLM-12''<br /> |1<br /> |-<br /> |8<br /> |YE0402<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |17<br /> |-<br /> |9<br /> |YE0405<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |YE0406<br /> |END ANCHOR<br /> |<br /> |<br /> |6<br /> |-<br /> |11<br /> |E0136<br /> |FUSE HOLDER-3 POLE<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |YE0901<br /> |FUSE-40A<br /> |<br /> |JTD-40-ID<br /> |3<br /> |-<br /> |13<br /> |E1013<br /> |BASE-RELAY<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |E1012<br /> |RELAY-11 PIN<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |E0137<br /> |FUSE HOLDER-2 POLE<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |YE0902<br /> |FUSE-10A<br /> |<br /> |''KLDR-10''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |17<br /> |N/A<br /> |CONTACTOR, &quot;A40&quot; SERIES<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |E0132-1<br /> |CONTACTOR, &quot;AF38&quot; SERIES<br /> |80332009<br /> |<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |18<br /> |N/A<br /> |OVERLOAD, &quot;TA&quot; SERIES<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |E0131-1<br /> |OVERLOAD, &quot;TF&quot; SERIES<br /> |80332009<br /> |<br /> |1<br /> |-<br /> |19<br /> |E1023<br /> |WIREWAY<br /> |<br /> |''Sold by length''<br /> |A/R<br /> |-<br /> |20<br /> |E0908<br /> |MOUNTING RAIL<br /> |<br /> |''Sold by length''<br /> |A/R<br /> |-<br /> |21<br /> |E1070<br /> |GROUND BAR-4 POSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |22<br /> |E1071<br /> |GROUND BAR-7 POSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |23<br /> |HW1061<br /> |SCREW-RHMS-#8-32 X 1&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |24<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> | rowspan=&quot;3&quot; |''Track and Wireway mounting hardware (Not shown)''<br /> |14<br /> |-<br /> |25<br /> |HW0133<br /> |WASHER-FLAT-#8<br /> |<br /> |14<br /> |-<br /> |26<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |17<br /> |-<br /> |27<br /> |E0139<br /> |AUXILIARY CONTACT BLOCK<br /> |80332009<br /> |''†† See notes''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† &quot;A40&quot; Series Contactor and &quot;TA&quot; Series Overload no longer available as of mid-March 2022. Components must be replaced with current Overload &amp; Relay Kit 80332009.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Auxiliary contact Block required for units equipped with &quot;AF38&quot; Series Contactor &amp; &quot;TF&quot; Series Overload.''<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Transformer&lt;/big&gt;&lt;/u&gt;''' ===<br /> '''&lt;big&gt;''Transformer for Units with 20 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS Transformer for Units with 20HP.png|alt=BE-TS Transformer for Units with 20HP|frameless|554x554px]]<br /> <br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0220<br /> |TRANSFORMER<br /> |<br /> |''480VAC to 120VAC, 3kVA''<br /> |1<br /> |-<br /> |2<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |3<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |7<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |3<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;Operator Console&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Operator Console Electrical.png|alt=BE-TS Operator Console Electrical|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0327<br /> |KEYED ACTUATOR ASSEMBLY<br /> |<br /> |''Includes 2 Keys &amp; Contact Block'' <br /> |1<br /> |-<br /> |2<br /> |E0351<br /> |KEY-REPLACEMENT<br /> |<br /> |''Set of 2 Keys''<br /> |A/R<br /> |-<br /> |3<br /> |E0309-1<br /> |HOUR METER<br /> |<br /> |''† Includes mounting hardware''<br /> |1<br /> |-<br /> |4<br /> |N/A<br /> |SWITCH-SELECTOR-3 POSITION<br /> |<br /> |''ON-OFF-ON, †† See notes''<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |5<br /> |N/A<br /> |LEGEND PLATE-VACUUM<br /> |<br /> |''††† See notes''<br /> |1<br /> |-<br /> |N/A<br /> |LEGEND PLATE-MAGNET<br /> |<br /> |''††† See notes''<br /> |1<br /> |-<br /> |6<br /> |N/A<br /> |CONTACT BLOCK-N/O<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |7<br /> |N/A<br /> |CONTACT BLOCK-N/C<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |8<br /> |E1083<br /> |SWITCH-SELECTOR-3 POSITION<br /> |80232001<br /> |''OFF-ON-OFF''<br /> |1<br /> |-<br /> |9<br /> |E1080<br /> |CONTACT BLOCK-N/O &amp; N/C<br /> |80232001<br /> |<br /> |2<br /> |-<br /> |10<br /> |YE0311<br /> |SWITCH-EMERGENCY STOP<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |YE0407<br /> |LEGEND PLATE-EMERGENCY STOP<br /> |<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Current Hour Meter is 3-Bolt version. Replacement of 4-Bolt version will require new mounting holes to be drilled in dashboard.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Parts no longer available. Must order new Selector Switch Kit 80232001''<br /> |-<br /> | colspan=&quot;6&quot; |''††† Parts no longer available. See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Labels_&amp;_Placards Labels &amp; Placards] section for current Placards''<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;Foot Switch&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Foot Switch Electrical.png|alt=BE-TS Foot Switch Electrical|frameless|701x701px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0301-1<br /> |SWITCH-FOOT OPERATED<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .500&quot; to .625&quot;''<br /> |1<br /> |-<br /> |3<br /> |E0515<br /> |CORD-14-3-SO/SOW<br /> |<br /> |<br /> |9'<br /> |-<br /> |4<br /> |HC0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |''If equipped''<br /> |2<br /> |-<br /> |5<br /> |HC0103<br /> |WASHER-1/4&quot;-LOCK<br /> |<br /> |''If equipped''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Open-Style Switch is a direct replacement for discontinued, Covered-Style Switch.'' <br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''Gate Switch'''&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Gate Switch Electrical.png|alt=BE-TS Gate Switch Electrical|frameless|613x613px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0312<br /> |SWITCH-PUSH BUTTON<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43017041<br /> |MOUNT-GATE SWITCH<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW1077<br /> |SCREW-RHMS-#10-24 X 5/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0307<br /> |BOLT-SHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |PL0502<br /> |GROMMET-3/8&quot; I.D.<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |YE0305<br /> |SWITCH-ROLLER<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |SS0303<br /> |WASHER-FLAT-#8<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |SS0111<br /> |SCREW-SHCS-#8-32 X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |SS0203<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''Proximity Switch'''&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Proximity Switch Electrical.png|alt=BE-TS Proximity Switch Electrical|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0314<br /> |SENSOR-PROXIMITY-30MM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43017027-2<br /> |BRACKET-PROXIMITY SENSOR<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |6<br /> |43017037-2<br /> |ANGLE-PROXIMITY SENSOR TARGET<br /> |<br /> |''Rotary Actuator units'' <br /> |1<br /> |-<br /> |43017084-2<br /> |ANGLE-PROXIMITY SENSOR TARGET<br /> |<br /> |''Helical Actuator units'' <br /> |1<br /> |-<br /> |7<br /> |HW0341<br /> |BOLT-FHSCS-1/4-20 X 5/8&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''120V Receptacle'''&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Proximity Switch Electrical.png|alt=BE-TS Proximity Switch Electrical|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |3<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0650<br /> |RECEPTACLE-DUPLEX<br /> |<br /> |''† 20A''<br /> |1<br /> |-<br /> |5<br /> |E0651<br /> |COVER-RECEPTACLE-DUPLEX<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0655<br /> |RECEPTACLE-GFCI<br /> |<br /> |''20A''<br /> |1<br /> |-<br /> |7<br /> |E0656<br /> |COVER-RECEPTACLE-GFCI<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |E0654<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |E0657<br /> |COVER-RECEPTACLE-DUPLEX/GFCI<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |''Mounting hardware (Not shown)''<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† If Duplex Receptacle has Split Feed (1 set of black &amp; white wires for each plug), the Break-Off Fin must be removed prior to installation.'' <br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''Console Enclosure'''&lt;/big&gt;&lt;/u&gt; ===<br /> <br /> ==== '''&lt;big&gt;''[Discontinued] Operator Console Enclosure for Units with 10 HP Power Unit''&lt;/big&gt;''' ====<br /> [[File:BE-TS (Discontinued) Operator Console Enclosure for Units with 10 HP Power Unit.png|alt=BE-TS (Discontinued) Operator Console Enclosure for Units with 10 HP Power Unit|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-6&quot; X 6&quot; X 4 &quot;<br /> |<br /> |''Consult factory''<br /> |1<br /> |-<br /> |2<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |3<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |4<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |5<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |8<br /> |43817087-2<br /> |BRACKET-MOUNTING-ENCLOSURE<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> | rowspan=&quot;4&quot; |''Mounting bracket hardware (Not shown)''<br /> |2<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |2<br /> |}<br /> '''&lt;big&gt;''[Discontinued] Operator Console Enclosure Panel for Units with 10 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS (Discontinued) Operator Console Enclosure Panel for Units with 10 HP Power Unit.png|alt=BE-TS (Discontinued) Operator Console Enclosure Panel for Units with 10 HP Power Unit|frameless|566x566px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0639<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |''Without holes''<br /> |1<br /> |-<br /> |2<br /> |E1024<br /> |TRACK-TERMINAL BLOCK<br /> |<br /> |''4 7/8&quot; LG''<br /> |1<br /> |-<br /> |3<br /> |E1020<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |9<br /> |-<br /> |4<br /> |E1330<br /> |END ANCHOR<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |E1040<br /> |END BARRIER<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0341<br /> |GROUND LUG<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |''2 for track mounting''<br /> |3<br /> |-<br /> |8<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |''2 for track mounting''<br /> |3<br /> |-<br /> |9<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |''2 for track mounting''<br /> |3<br /> |}<br /> '''&lt;big&gt;''[Current] Operator Console Enclosure for Units with 20 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS (Current) Operator Console Enclosure for Units with 20 HP Power Unit.png|alt=BE-TS (Current) Operator Console Enclosure for Units with 20 HP Power Unit|frameless|549x549px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-8&quot; X 8&quot; X 4&quot;<br /> |<br /> |''Consult factory''<br /> |1<br /> |-<br /> |2<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |3<br /> |-<br /> |3<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .625&quot; to .750&quot;''<br /> |1<br /> |-<br /> |4<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''† Grip size .450&quot; to .560&quot;''<br /> |4<br /> |-<br /> |5<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''†'' ''Grip size .250&quot; to .375&quot;''<br /> |4<br /> |-<br /> |6<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |11<br /> |-<br /> |7<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |E1349<br /> |SEAL-KNOCKOUT-1/2&quot;<br /> |<br /> |''† See notes''<br /> |A/R<br /> |-<br /> |9<br /> |43037003-2<br /> |BRACKET-MOUNTING-ENCLOSURE<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> | rowspan=&quot;4&quot; |''Mounting bracket hardware (Not shown)''<br /> |2<br /> |-<br /> |12<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |2<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Restraints sold for machines equipped with all available options. Machines built without certain options will have Knockout Seals (Item #8) installed in place of restraints.''<br /> |}<br /> '''&lt;big&gt;''[Current] Operator Console Enclosure Panel for Units with 20 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS (Current) Operator Console Enclosure Panel for Units with 20 HP Power Unit.png|alt=BE-TS (Current) Operator Console Enclosure Panel for Units with 20 HP Power Unit|frameless|527x527px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0135<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |''Blank panel without holes''<br /> |1<br /> |-<br /> |2<br /> |E0908<br /> |MOUNTING RAIL<br /> |<br /> |''Sold by length''<br /> |A/R<br /> |-<br /> |3<br /> |YE0402<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |14<br /> |-<br /> |4<br /> |YE0405<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |YE0406<br /> |END ANCHOR<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |E1074<br /> |JUMPER-2 POLE<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |E0130<br /> |GROUND BAR-7 POSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW1061<br /> |SCREW-RHMS-#8-32 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> | rowspan=&quot;3&quot; |''Track and Wireway mounting hardware (Not shown)''<br /> |2<br /> |-<br /> |10<br /> |HW0133<br /> |WASHER-FLAT-#8<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |4<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''Junction Box'''&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Junction Box.png|alt=BE-TS Junction Box|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |2<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |3<br /> |-<br /> |3<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .500&quot; to .625&quot;''<br /> |4<br /> |-<br /> |4<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .625&quot; to .750&quot;''<br /> |2<br /> |-<br /> |5<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Top Module Junction Box&lt;/big&gt;''''' ====<br /> [[File:BE-TS Junction Box.png|alt=BE-TS Junction Box|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1329<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0662<br /> |RESTRAINT-3/4&quot;-LIQUID TIGHT<br /> |<br /> |''Includes Locknut'' <br /> |1<br /> |-<br /> |3<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .625&quot; to .750&quot;''<br /> |1<br /> |-<br /> |4<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Wiring Diagrams&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;BE-TS with 10 HP Motor Wiring Diagram&lt;/big&gt;''''' ====<br /> [[File:BE-TS Wiring Diagram-10HP Motor.png|alt=BE-TS Wiring Diagram-10HP Motor|frameless|800x800px]]<br /> <br /> ==== '''''&lt;big&gt;BE-TS with Magnet and 10 HP Motor Wiring Diagram&lt;/big&gt;''''' ====<br /> [[File:BE-TS with Magnet and 10HP Motor Wiring Diagram.png|alt=BE-TS with Magnet and 10HP Motor Wiring Diagram|frameless|800x800px]]<br /> <br /> ==== '''''&lt;big&gt;BE-TS with Magnet and 20 HP Motor Wiring Diagram&lt;/big&gt;''''' ====<br /> [[File:BE-TS Magnet Wiring Diagram-20HP Motor.png|alt=BE-TS Magnet Wiring Diagram-20HP Motor|frameless|800x800px]]<br /> <br /> [[File:BE-TS Magnet Wiring Diagram-20HP Motor-02.png|alt=BE-TS Magnet Wiring Diagram-20HP Motor-02|frameless|800x800px]]<br /> <br /> [[File:BE-TS Magnet Wiring Diagram-20HP Motor-03.png|alt=BE-TS Magnet Wiring Diagram-20HP Motor-03|frameless|800x800px]]<br /> <br /> [[File:BE-TS Magnet Wiring Diagram-20HP Motor-04.png|alt=BE-TS Magnet Wiring Diagram-20HP Motor-04|frameless|800x800px]]<br /> <br /> == &lt;big&gt;Hydraulics&lt;/big&gt; ==<br /> <br /> === '''&lt;big&gt;&lt;u&gt;[Discontinued] 10 HP Power Unit&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:(Discontinued) BE-TS Power Unit (10HP).png|alt=(Discontinued) BE-TS Power Unit (10HP)|frameless|553x553px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0011<br /> |MOTOR-ELECTRIC-10HP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0326<br /> |ADAPTER-PUMP TO MOTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0325<br /> |PUMP-VANE-16 GPM<br /> |<br /> |''Variable displacement''<br /> |1<br /> |-<br /> |4<br /> |HC0327<br /> |COUPLING BODY-1 3/8&quot;<br /> |<br /> |''Motor end''<br /> |1<br /> |-<br /> |5<br /> |HC0329<br /> |SPIDER-COUPLING INSERT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HC0328<br /> |COUPLING BODY-7/8&quot;<br /> |<br /> |''Pump end''<br /> |1<br /> |-<br /> |7<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1 1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H1549<br /> |ADAPTER-#20 JICM X #24 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |H1595<br /> |ADAPTER-90 DEG-#20 JICM X #20 JICSW<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |H1609<br /> |ADAPTER-90 DEG-#12 JICM X #16 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |H1522<br /> |ADAPTER-#12 JICSW X #12 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |HC0260<br /> |VALVE-MAIN SYSTEM RELIEF<br /> |<br /> |<br /> |1<br /> |-<br /> |15a<br /> |43846003<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''†† For Item 15 (Not shown)''<br /> |A/R<br /> |-<br /> |16<br /> |HC0318<br /> |GAUGE-PRESSURE<br /> |<br /> |<br /> |1<br /> |-<br /> |17<br /> |H0206<br /> |PLUG-#4 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |H1108<br /> |ADAPTER-#10 JICM X #12 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |H1522<br /> |ADAPTER-#12 JICSW X #12 SAEM<br /> |<br /> |''† See note''<br /> |1<br /> |-<br /> |20<br /> |H1542<br /> |ADAPTER-#12 JICM X #12 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |21<br /> |HC0280<br /> |VALVE-CHECK<br /> |<br /> |''† See note''<br /> |1<br /> |-<br /> |22<br /> |H1542<br /> |ADAPTER-#12 JICM X #12 SAEM<br /> |<br /> |''† See note''<br /> |1<br /> |-<br /> |23<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .500&quot; to .625&quot;''<br /> |1<br /> |-<br /> |23a<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |''For Item 23 (Not shown)''<br /> |1<br /> |-<br /> |24<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |25<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |26<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |27<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Parts noted used on units built after April 2001.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Cartridges are for replacement only.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;[Discontinued] 30 Gallon Reservoir&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:(Discontinued) BE-TS 30 Gallon Reservoir.png|alt=(Discontinued) BE-TS 30 Gallon Reservoir|frameless|542x542px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43842001<br /> |RESERVOIR-VERTICAL-30 GAL<br /> |<br /> |''Includes Items 1 through 8''<br /> |1<br /> |-<br /> |1<br /> |HC0542<br /> |GASKET-CHANNEL<br /> |<br /> |''Sold by length''<br /> |7'<br /> |-<br /> |2<br /> |HC0340<br /> |GAUGE-SIGHT<br /> |<br /> |''with Thermometer''<br /> |1<br /> |-<br /> |3<br /> |HC0306<br /> |STRAINER-SUCTION<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HC0308<br /> |FILLER/BREATHER ASSEMBLY<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0209<br /> |SCREW-RHMS-10-32 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |BI0110<br /> |ELBOW-STR-90 DEG-#16 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |8<br /> |H0208<br /> |PLUG-#12 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1590<br /> |ADAPTER-90 DEG-#16 JICM X #16 FNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |BI0102<br /> |ELBOW-#12 FNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |BI0020<br /> |NIPPLE-#12 NPT X 3&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |BI0301<br /> |TEE-#12 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |H1502<br /> |ADAPTER-#8 JICM X #12 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |BI0002<br /> |NIPPLE-CLOSE-#12 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HC0307<br /> |RETURN LINE FILTER ASSEMBLY<br /> |<br /> |''Housing and Filter''<br /> |1<br /> |-<br /> |16<br /> |HC0317<br /> |FILTER-RETURN LINE<br /> |<br /> |''Replacement filter''<br /> |1<br /> |-<br /> |17<br /> |H1509<br /> |ADAPTER-#10 JICM X #12 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> | rowspan=&quot;4&quot; |''Mounting hardware''<br /> <br /> ''(Not shown)''<br /> |4<br /> |-<br /> |19<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |8<br /> |-<br /> |20<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |4<br /> |-<br /> |21<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;[Current] Power Unit (20 HP)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:(Current) BE-TS 30 Power Unit (20 HP).png|alt=(Current) BE-TS 30 Power Unit (20 HP)|frameless|531x531px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0040<br /> |MOTOR-ELECTRIC-20 HP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0357<br /> |ADAPTER-PUMP TO MOTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0356<br /> |PUMP-PISTON-71CC<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HC0358-M<br /> |COUPLING BODY-M300-1 5/8&quot; BORE<br /> |<br /> |''MOTOR SIDE''<br /> |1<br /> |-<br /> |5<br /> |HC0358-I<br /> |SPIDER-COUPLING INSERT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HC0358-P<br /> |COUPLING BODY-M300-1 1/4&quot; BORE<br /> |<br /> |''PUMP SIDE''<br /> |1<br /> |-<br /> |7<br /> |HW0602<br /> |BOLT-HHCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0113<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |H1604<br /> |ADAPTER-90 DEG-#12 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HC0363<br /> |ADAPTER-FLANGE-#32 NPT<br /> |<br /> |''Includes O-ring''<br /> |1<br /> |-<br /> |11<br /> |HC0240<br /> |BLOCK-CHECK VALVE<br /> |<br /> |''Includes Cartridge &amp; O-ring''<br /> |1<br /> |-<br /> |12<br /> |N/A<br /> |CARTRIDGE-CHECK VALVE<br /> |<br /> |''† Replacement cartridge''<br /> |A/R<br /> |-<br /> |13<br /> |H0300<br /> |ELBOW-STR-90 DEG-#4 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |HC0318<br /> |GAUGE-PRESSURE<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |HE0704<br /> |ADAPTER-SPLIT FLANGE-1&quot;<br /> |<br /> |''2-Piece adapter with O-ring''<br /> |1<br /> |-<br /> |16<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |H0211<br /> |ADAPTER-#24 NPT X #12<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |E0661<br /> |RESTRAINT-3/4&quot;-90 DEG-LIQUID TIGHT<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |HW0513<br /> |BOLT-HHCS-1/2-13 X 2 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |20<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |21<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTE<br /> |-<br /> | colspan=&quot;6&quot; |''† Consult factory''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;[Current] 45 Gallon Reservoir&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:(Current) BE-TS 45 Gallon Reservoir.png|alt=(Current) BE-TS 45 Gallon Reservoir|frameless|547x547px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43842010<br /> |45 GAL RESERVOIR ASSEMBLY<br /> |<br /> |''Includes Items 1 through 7''<br /> |A/R<br /> |-<br /> |1<br /> |43848005<br /> |PLATE-COVER<br /> |<br /> |''† See note''<br /> |1<br /> |-<br /> |2<br /> |HC0308<br /> |FILLER/BREATHER ASSEMBLY<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0209<br /> |SCREW-RHMS-10-32 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |4<br /> |HC0340<br /> |GAUGE-SIGHT<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H0208<br /> |PLUG-#12 NPT<br /> |<br /> |''Non-IIoT equipped units only''<br /> |1<br /> |-<br /> |6<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |7<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |8<br /> |HC0361<br /> |HOUSING-FILTER<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HC0354<br /> |CARTRIDGE-FILTER<br /> |<br /> |''10 Micron filtration''<br /> |1<br /> |-<br /> |10<br /> |HC0362<br /> |FLANGE-SUCTION TUBE<br /> |<br /> |''Includes hardware''<br /> |1<br /> |-<br /> |11<br /> |43848008<br /> |TUBE-SUCTION<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |H1569<br /> |ADAPTER-45 DEG-#12 JICM X #12 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |H0202<br /> |REDUCER-#24 SAE X #12 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |H1622<br /> |ADAPTER-90 DEG-#12 SAEM X #12 JICM<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |H1644<br /> |PLUG-#24 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |H1610<br /> |ADAPTER-45 DEG-#12 JICSW X #12 JICM<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |PB0311-1<br /> |NIPPLE-#12 NPT X 2&quot;-BRASS<br /> |<br /> | rowspan=&quot;3&quot; |''†† See notes''<br /> |1<br /> |-<br /> |20<br /> |BI0301<br /> |TEE-#12 FNPT<br /> |<br /> |1<br /> |-<br /> |21<br /> |H1502<br /> |ADAPTER-#8 JICM X #12 MNPT<br /> |<br /> |2<br /> |-<br /> |22<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> | rowspan=&quot;5&quot; |''Reservoir mounting hardware'' <br /> <br /> ''(Not shown)''<br /> |2<br /> |-<br /> |23<br /> |HW0405<br /> |BOLT-HHCS-3/8-16 X 2&quot;<br /> |<br /> |2<br /> |-<br /> |24<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |8<br /> |-<br /> |25<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |4<br /> |-<br /> |26<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† RVT silicone required to seal cover plate after removal.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Components required for units equipped with radial piston drive wheel motors plumbed with case drain hoses. See [https://tech.bhs1.com/index.php/(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)#Drive_Wheel_Assembly Drive Wheel Assembly] section.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Valve Assembly&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Lift Valve and Manifold Detail&lt;/big&gt;''''' ====<br /> [[File:BE-TS Lift Valve and Manifold.png|alt=BE-TS Lift Valve and Manifold|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |80342001<br /> |LEVER VALVE RETRO KIT<br /> |<br /> |''† Required prior to 2006'' <br /> |A/R<br /> |-<br /> |1<br /> |HC0257<br /> |VALVE-LEVER<br /> |<br /> |''Effective from 2006 to Present''<br /> |1<br /> |-<br /> |2<br /> |HC0252<br /> |MANIFOLD-D05-1 BANK<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0318<br /> |BOLT-SHCS-1/4-20 X 1 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |H1642<br /> |PLUG-#12 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H1542<br /> |ADAPTER-#12 JICM X #12 SAEM<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HC0248<br /> |FIXED FLOW REGULATOR<br /> |<br /> |''††14 GPM''<br /> |1<br /> |-<br /> |12<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |13<br /> |H1540<br /> |ADAPTER-#8 JICM X #8 SAEM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |14<br /> |43817085<br /> |PLATE-ADAPTER-VALVE<br /> |<br /> |''† Not shown''<br /> |1<br /> |-<br /> |15<br /> |SS0104<br /> |BOLT-SHCS-1/4-20 X 5/8&quot;-SST<br /> |<br /> |''† Not shown''<br /> |4<br /> |-<br /> |16<br /> |SS0300<br /> |WASHER-FLAT-1/4&quot;-SAE-SST<br /> |<br /> |''† Not shown''<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |<br /> |-<br /> | colspan=&quot;6&quot; |''† Kit includes Items 1 &amp; 14 through 16. Minor modifications to the dash board required.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† For units shipped April 2017 to present''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Floor Drive / Arm Rotation Valve and Manifold Detail&lt;/big&gt;''''' ====<br /> [[File:BE-TS Floor Drive-Arm Rotation Valve and Manifold.png|alt=BE-TS Floor Drive-Arm Rotation Valve and Manifold|frameless|570x570px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0233<br /> |VALVE-LEVER<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HC0251<br /> |MANIFOLD-D03-2 BANK<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1545<br /> |ADAPTER-#10 JICM X #10 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |H1600<br /> |ADAPTER-90 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |H1587<br /> |ADAPTER-#6 JICSW X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HC0211<br /> |VALVE-ADJUSTABLE FLOW CONTROL<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |H1504<br /> |ADAPTER-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |H1640<br /> |PLUG-#6 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |43817033-2<br /> |RISER PLATE<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |14<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |HC0233-SK<br /> |SEAL KIT<br /> |<br /> |''For Item 1 (Not shown)''<br /> |A/R<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Valve Assembly&lt;/big&gt;''''' ====<br /> [[File:BE-TS Valve Assembly.png|alt=BE-TS Valve Assembly|frameless|538x538px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0233<br /> |VALVE-LEVER<br /> |<br /> |<br /> |3<br /> |-<br /> |2<br /> |HC0250<br /> |MANIFOLD-D03-3 BANK<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1610<br /> |ADAPTER-90 DEG-#10 JICM X #10 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |H1641<br /> |PLUG-#10 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H1000<br /> |ADAPTER-#8 SAEM X #4 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |H0001<br /> |NIPPLE-#4 NPT<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HC0247<br /> |FIXED FLOW REGULATOR-2.25 GPM<br /> |<br /> |''† See notes''<br /> |4<br /> |-<br /> |8<br /> |H1504<br /> |ADAPTER-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |H1640<br /> |PLUG-#6 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |H1540<br /> |ADAPTER-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |43817034-2<br /> |RISER PLATE<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |14<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |15<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HC0233-SK<br /> |SEAL KIT<br /> |<br /> |''For Item 1 (Not shown)''<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Units built prior to January 2107 equipped with Adjustable Flow Controls. Fixed Flow Regulators are direct replacement for Adjustable Flow Controls.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Lift Cylinder&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Lift Cylinder.png|alt=BE-TS Lift Cylinder|frameless|582x582px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43822006<br /> |CLEVIS ASSEMBLY<br /> |<br /> |''Sold as assembly only''<br /> |4<br /> |-<br /> |2<br /> |HW0813<br /> |SCREW-SHSS-3/8-16 X 1/2&quot;<br /> |<br /> |''Nylon tipped''<br /> |8<br /> |-<br /> |3<br /> |HC0420<br /> |CYLINDER-LIFT<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |H1645<br /> |ADAPTER-90 DEG-#8 SAEM X #6 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |H0212<br /> |ADAPTER-#6 NPT X #8 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HC0425<br /> |VELOCITY FUSE<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Lift Circuit&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Lift Circuit.png|alt=BE-TS Lift Circuit|frameless|553x553px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43017014-2<br /> |SUPPORT-PILOT DOWN MANIFOLD<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43718008<br /> |STANDOFF<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0315<br /> |BOLT-HHCS-1/4-20 X 4 1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |10<br /> |-<br /> |7<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |5<br /> |-<br /> |8<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |5<br /> |}<br /> <br /> ==== '''''&lt;big&gt;[Discontinued] Lift Circuit Configuration&lt;/big&gt;''''' ====<br /> [[File:(Discontinued) BE-TS Lift Circuit Configuration.png|alt=(Discontinued) BE-TS Lift Circuit Configuration|frameless|507x507px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |H1507<br /> |ADAPTER-#8 JICM X #8 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0264<br /> |VALVE-CHECK-PILOT TO OPEN<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H1621<br /> |ADAPTER-#4 SAEM X #2 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HC0269<br /> |VALVE-ADJUSTABLE FLOW CONTROL<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |H1591<br /> |ADAPTER-90 DEG-#6 JICM X #2 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |H1587<br /> |ADAPTER-#6 JICSW X #4 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1501<br /> |ADAPTER-#8 JICM X #6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43047002<br /> |MANIFOLD-PILOT DOWN<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> ==== '''''&lt;big&gt;[Current] Lift Circuit Configuration&lt;/big&gt;''''' ====<br /> [[File:(Current) BE-TS Lift Circuit Configuration.png|alt=(Current) BE-TS Lift Circuit Configuration|frameless|534x534px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0215<br /> |VALVE-CHECK-CARTRIDGE<br /> |<br /> |<br /> |8<br /> |-<br /> |2<br /> |H1560<br /> |ADAPTER-45 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |H1670<br /> |ADAPTER-45 DEG-#12 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |H1612<br /> |ADAPTER-90 DEG-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HC0283<br /> |VALVE-COUNTER BALANCE<br /> |<br /> |''Includes cartridge''<br /> |1<br /> |-<br /> |6<br /> |43846004<br /> |CARTRIDGE-COUNTER BALANCE<br /> |<br /> |''Replacement cartridge''<br /> |A/R<br /> |-<br /> |7<br /> |H1552<br /> |ADAPTER-#6 JICM X #6 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |H1587<br /> |ADAPTER-#6 JICSW X #4 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1501<br /> |ADAPTER-#8 JICM X #6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43047002<br /> |MANIFOLD-PILOT DOWN<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Cartridges are for replacement only''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Down-Speed Flow Control&lt;/big&gt;''''' ====<br /> [[File:BE-TS Down-Speed Flow Control.png|alt=BE-TS Down-Speed Flow Control|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0270<br /> |VALVE-ADJUSTABLE FLOW CONTROL<br /> |<br /> |''Pressure compensated''<br /> |1<br /> |-<br /> |2<br /> |H0007<br /> |NIPPLE-#8 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1647<br /> |ADAPTER-90 DEG-#10 SAEM X #8 FNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |H1680<br /> |ADAPTER-#10 JICM X #8 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H1690<br /> |ADAPTER-#10 JICSW X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HC0248<br /> |FIXED FLOW REGULATOR<br /> |<br /> |''14 GPM''<br /> |1<br /> |-<br /> |7<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |H1612<br /> |ADAPTER-90 DEG-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1547<br /> |ADAPTER-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Cross Port Relief&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Mounting Configuration&lt;/big&gt;''''' ====<br /> [[File:BE-TS Cross Port Relief Mounting Configuration.png|alt=BE-TS Cross Port Relief Mounting Configuration|frameless|546x546px]]<br /> {| class=&quot;wikitable&quot;<br /> ! colspan=&quot;6&quot; |UNITS BUILT PRIOR TO SEPTEMBER, 2014<br /> |-<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> ! colspan=&quot;6&quot; |UNITS BUILT SEPTEMBER, 2014 TO DECEMBER, 2014<br /> |-<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW0305<br /> |BOLT-HHCS-1/4-20 X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |7<br /> |43058004<br /> |PLATE-SPACER<br /> |<br /> |<br /> |1<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> ! colspan=&quot;6&quot; |UNITS BUILT DECEMBER, 2014 TO PRESENT<br /> |-<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |2<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |}<br /> ''NOTE: Effectivity dates refer to dates new extractor units shipped from the factory. Replacement part effectivity may differ due to factory inventory levels at time of parts order. Consult factory if unsure of parts needed.''<br /> <br /> ==== '''''&lt;big&gt;Components&lt;/big&gt;''''' ====<br /> [[File:BE-TS Cross Port Relief Components.png|alt=BE-TS Cross Port Relief Components|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0262<br /> |VALVE-CROSS PORT RELIEF<br /> |<br /> |''Includes cartridges''<br /> |1<br /> |-<br /> |2<br /> |43046002<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''For Item 1''<br /> |A/R<br /> |-<br /> |3<br /> |H1540<br /> |ADAPTER-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |H1507<br /> |ADAPTER-#8 JICM X #8 MNPT<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |HC0239<br /> |VALVE-ADJUSTABLE FLOW CONTROL<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |H1568<br /> |ADAPTER-45 DEG-#8 JICM X #8 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |H1646<br /> |ADAPTER-90 DEG-#8 SAEM X #6 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |H0805<br /> |TEE-#6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HC0273<br /> |REGULATOR-FIXED FLOW<br /> |<br /> |''7.0 GPM''<br /> |4<br /> |-<br /> |11<br /> |H1501<br /> |ADAPTER-#8 JICM X #6 MNPT<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Floor Drive Cutout&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Floor Drive Cutout.png|alt=BE-TS Floor Drive Cutout|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |SOLENOID-DRIVE CUTOUT<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |7<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |BI0001<br /> |NIPPLE-CLOSE-#8 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |N/A<br /> |SOLENOID-DRIVE CUTOUT<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |10<br /> |YE0501<br /> |CONNECTOR-SOLENOID<br /> |<br /> |''DIN 43650''<br /> |1<br /> |-<br /> |11<br /> |43058004<br /> |PLATE-SPACER<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |HC0278-TS/QS<br /> |SOLENOID-DRIVE CUTOUT<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |H1547<br /> |ADAPTER-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |H1612<br /> |ADAPTER-90 DEG-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Part obsolete. Must be replaced with Retro Kit Part # 80242007.''<br /> |-<br /> | colspan=&quot;6&quot; |''NOTE: Effectivity dates refer to dates new extractor units shipped from the factory. Replacement part effectivity may differ due to factory inventory levels at time of parts order. Consult factory if unsure of parts needed.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Counter Balance Valve&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Counter Balance Valve.png|alt=BE-TS Counter Balance Valve|frameless|554x554px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0263<br /> |VALVE-COUNTER BALANCE<br /> |<br /> |<br /> |1<br /> |-<br /> |1a<br /> |43046004<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''† For Item 1 (Not shown)''<br /> |A/R<br /> |-<br /> |2<br /> |H1615<br /> |ADAPTER-90 DEG-#6 JICM X #6 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |H1552<br /> |ADAPTER-#6 JICM X #6 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0305<br /> |BOLT-HHCS-1/4-20 X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Cartridges are for replacement only''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Transition Plate&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Transition Plate.png|alt=BE-TS Transition Plate|frameless|576x576px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817067-2<br /> |PLATE-TRANSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |H0020<br /> |UNION-BULKHEAD-45 DEG-#6 JICM<br /> |<br /> |<br /> |8<br /> |-<br /> |3<br /> |H0021<br /> |NUT-BULKHEAD-#6 JIC<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Return Line Manifold&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Return Line Manifold.png|alt=BE-TS Return Line Manifold|frameless|555x555px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43847001<br /> |MANIFOLD-RETURN LINE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |H1501<br /> |ADAPTER-#8 JICM X #6 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1503<br /> |ADAPTER-#12 JICM X #12 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |43817069-2<br /> |BRACKET-BULKHEAD<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |H0015<br /> |UNION-BULKHEAD-90 DEG-#12 JICM<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H0016<br /> |NUT-BULKHEAD-#12 JIC<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;EQ Chain Hose Guard&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS EQ Chain Hose Guard.png|alt=BE-TS EQ Chain Hose Guard|frameless|577x577px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43017074-2<br /> |GUARD-HOSE-EQ CHAIN<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Used on units manufactured after May 2015.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Hydraulic Schematics&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Hydraulic Schematic.png|alt=BE-TS Hydraulic Schematic|frameless|1180x1180px]]<br /> <br /> ==== '''''&lt;big&gt;Extended Reach Hydraulic Schematics&lt;/big&gt;''''' ====<br /> [[File:BE-TS Hydraulic Schematic Extended Reach.png|alt=BE-TS Hydraulic Schematic Extended Reach|frameless|905x905px]]<br /> <br /> == &lt;big&gt;Standard Available Options&lt;/big&gt; ==<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Strobe &amp; Alarm&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''&lt;big&gt;''[Discontinued] Strobe Light &amp; Stanchion Configuration''&lt;/big&gt;''' ====<br /> [[File:(Discontinued) BE-TS Strobe Light.png|alt=(Discontinued) BE-TS Strobe Light|frameless|722x722px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0317<br /> |STROBE LIGHT<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41215014<br /> |STANCHION<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0401<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |E1010<br /> |RECEPTACLE-TWIST LOCK<br /> |<br /> |''(Not shown)''<br /> |1<br /> |-<br /> |7<br /> |E1011<br /> |PLUG-TWIST LOCK<br /> |<br /> |''(Not shown)''<br /> |1<br /> |}<br /> <br /> ==== '''&lt;big&gt;''[Discontinued] Audible Alarm Configuration''&lt;/big&gt;''' ====<br /> [[File:(Discontinued) BE-TS Audible Alarm.png|alt=(Discontinued) BE-TS Audible Alarm|frameless|490x490px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0317-A<br /> |AUDIBLE ALARM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0654<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |00117101-2<br /> |MOUNTING BRACKET<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |5<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> ==== '''&lt;big&gt;''[Current] Stack Light Strobe &amp; Alarm Configuration''&lt;/big&gt;''' ====<br /> [[File:(Current) BE-TS Stack Light Strobe and Alarm Configuration.png|alt=(Current) BE-TS Stack Light Strobe and Alarm Configuration|frameless|844x844px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0362<br /> |MOUNTING BASE<br /> |<br /> |''Includes restraints''<br /> |1<br /> |-<br /> |2<br /> |E0365<br /> |TERMINAL BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0363<br /> |STROBE LIGHT-AMBER-120VAC<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |4<br /> |E0364<br /> |AUDIBLE ALARM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |5<br /> |SS0118<br /> |SCREW-SHCS-#8-32 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |SS0303<br /> |WASHER-FLAT-#8<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |SS0203<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |E1010<br /> |RECEPTACLE-TWIST LOCK<br /> |<br /> |''(Not shown)''<br /> |1<br /> |-<br /> |9<br /> |E1011<br /> |PLUG-TWIST LOCK<br /> |<br /> |''(Not shown)''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† For units not equipped with the audible alarm option, a cap (not shown) mounts on top of the strobe light in place of the audible alarm. Cap included with base.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† For units not equipped with the strobe light option, the audible alarm mounts directly to the terminal base in place of the strobe light.'' <br /> |}<br /> <br /> ==== '''&lt;big&gt;''Strobe &amp; Alarm Mounting''&lt;/big&gt;''' ====<br /> [[File:BE-TS Strobe and Alarm Mounting.png|alt=BE-TS Strobe and Alarm Mounting|frameless|516x516px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41235060<br /> |STACK LIGHT STANCHION<br /> |<br /> |''Discontinued''<br /> |A/R<br /> |-<br /> |2<br /> |HW0401<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |3<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |4<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |REF<br /> |43032006<br /> |STANCHION ASSEMBLY<br /> |<br /> |''Includes items 5 through 8''<br /> |A/R<br /> |-<br /> |5<br /> |43035003<br /> |STACK LIGHT STANCHION<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43037007-2<br /> |CLAMP BRACKET<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0305<br /> |BOLT-HHCS-1/4-20 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0050<br /> |NUT-FLANGED-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |43037004-2<br /> |MOUNTING BRACKET<br /> |<br /> |''Overhead Guard only''<br /> |1<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Horn&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Horn.png|alt=BE-TS Horn|frameless|565x565px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |YE0308<br /> |BUTTON-HORN<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0317-A<br /> |AUDIBLE ALARM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0654<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |00117101-2<br /> |MOUNTING BRACKET<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |11<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Overhead Guard&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Overhead Guard.png|alt=BE-TS Overhead Guard|frameless|530x530px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817119-2<br /> |GUARD-SIDE<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |2<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0406<br /> |BOLT-HHCS-3/8-16 X 2-1/2&quot;<br /> |<br /> |<br /> |5<br /> |-<br /> |5<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |6<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |<br /> |<br /> |5<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Side Guards used on units built November 2013 to Present. Mounting hardware valid for all units with Removable Overhead Guard.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Operator Sheild&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''&lt;big&gt;''[Current] Operator Shield''&lt;/big&gt;''' ====<br /> [[File:(Current) BE-TS 30 Operator Sheild.png|alt=(Current) BE-TS 30 Operator Sheild|frameless|566x566px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43814025<br /> |OPERATOR SHIELD<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |HC0542<br /> |GASKET EDGING<br /> |<br /> |''(2) @ 38&quot; LG, (1) @ 60&quot; LG''<br /> |136&quot;<br /> |-<br /> |3<br /> |43817116-2<br /> |BRACKET-TOP<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |1412FSW<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |43817117-2<br /> |BRACKET-CENTER SUPPORT-OUTSIDE<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43817118-2<br /> |BRACKET-CENTER SUPPORT-INSIDE<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |SS0114<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |8<br /> |SS0502<br /> |LANYARD-8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |SS0501<br /> |PIN-QUICK RELEASE-3/16&quot; X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Consult factory for units built prior to November 2013 with plexiglass bolted directly to Overhead Guard structure on front and sides.'' <br /> |}<br /> <br /> ==== '''&lt;big&gt;''Operator Shield (Used Prior to November 2013)''&lt;/big&gt;''' ====<br /> [[File:BE-TS Operator Shield (Used Prior to November 2013).png|alt=BE-TS Operator Shield (Used Prior to November 2013)|frameless|559x559px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43717116<br /> |SHIELD-OPERATOR<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |43015010<br /> |FRAME-OPERATOR SHIELD WELDMENT<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43017066-2<br /> |SUPPORT-SIDE<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |43017065-2<br /> |SUPPORT-LOWER<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43017067-2<br /> |SUPPORT-UPPER<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |7<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |32<br /> |-<br /> |8<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |9<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |16<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Consult factory for units with plexiglass bolted directly to frame.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Powered Roller Cutout&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Powered Roller Cutout Photo Eye &amp; Reflector Locations (Prior to May 2022)&lt;/big&gt;''''' ====<br /> [[File:BE-TS Powered Roller Cutout Photo Eye &amp; Reflector Locations.png|alt=BE-TS Powered Roller Cutout Photo Eye &amp; Reflector Locations|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1321A<br /> |PHOTO EYE<br /> |<br /> |''† Polarized''<br /> |1<br /> |-<br /> |2<br /> |41217170-2<br /> |MOUNT-PHOTO EYE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0216<br /> |SCREW-#10-24 X 2&quot;<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |4<br /> |HW0032<br /> |NUT-NILN-#10-24<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |E1321-R<br /> |REFLECTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |41217171<br /> |MOUNT-REFLECTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |SS0803<br /> |SCREW-RHMS-#6-32 X 5/8&quot;<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |8<br /> |SS0125<br /> |BOLT-HHCS-1/4-20 X 5/8&quot;<br /> |<br /> |''††† See notes''<br /> |4<br /> |-<br /> |9<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''Quantities provided are for Single-Sided (PRC-1) Power Roller Cutout option. For units with Double Sided (PRC-2) option, quantities are double.''<br /> |-<br /> | colspan=&quot;6&quot; |''† Polarized Photo Eye recommended to prevent potential operational issues with very smooth or shiny battery cases.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Photo Eye &amp; Reflector mounting screws are trimmed to length.''<br /> |-<br /> | colspan=&quot;6&quot; |''††† Photo Eye &amp; Reflector Bracket Mounting Screws may be required to ground flush to prevent intereferance with guards.''<br /> |}<br /> '''''&lt;big&gt;Powered Roller Cutout Photo Eye &amp; Reflector Locations (May 2022 to Present)&lt;/big&gt;'''''<br /> <br /> [[File:BE-TS Powered Roller Cutout Photo Eye &amp; Reflector Locations (May 2022 to Present).png|alt=BE-TS Powered Roller Cutout Photo Eye &amp; Reflector Locations (May 2022 to Present)|frameless|555x555px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1321A<br /> |PHOTO EYE<br /> |<br /> |''† Polarized''<br /> |1<br /> |-<br /> |2<br /> |13537001-2<br /> |MOUNT-PHOTO EYE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E1321-R<br /> |REFLECTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |41217171<br /> |MOUNT-REFLECTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |SS0803<br /> |SCREW-RHMS-#6-32 X 5/8&quot;<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |PL0506<br /> |GROMMET-SEALING-2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''Quantities provided are for Single-Sided (PRC-1) Power Roller Cutout option. For units with Double Sided (PRC-2) option, quantities are double.''<br /> |-<br /> | colspan=&quot;6&quot; |''† Polarized Photo Eye recommended to prevent potential operational issues with very smooth or shiny battery cases.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Reflector mounting screws are trimmed to length.''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Powered Roller Cutout Mounting&lt;/big&gt;''''' ====<br /> [[File:BE-TS Powered Roller Cutout Mounting.png|alt=BE-TS Powered Roller Cutout Mounting|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0281<br /> |SOLENOID VALVE<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |BI0001<br /> |NIPPLE-CLOSE-#8 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |6<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |7<br /> |H1600<br /> |ADAPTER-90 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |H1546<br /> |ADAPTER-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Powered Roller Cutout Override Button&lt;/big&gt;''''' ====<br /> [[File:BE-TS Powered Roller Cutout Override Button.png|alt=BE-TS Powered Roller Cutout Override Button|frameless|568x568px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ACTUATOR-PUSH BUTTON (DISCONTINUED)<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |N/A<br /> |CONTACT BLOCK-N/C (DISCONTINUED)<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |3<br /> |E0384<br /> |ACTUATOR-PUSH BUTTON<br /> |80932002<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0386<br /> |CONTACT BLOCK-N/C<br /> |80932002<br /> |<br /> |1<br /> |-<br /> |5<br /> |E0387<br /> |DUMMY BLOCK<br /> |80932002<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0388<br /> |PUSH BUTTON-GREEN<br /> |80932002<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''Button location on dash may vary from position shown.''<br /> |-<br /> | colspan=&quot;6&quot; |''† Parts no longer available. Must order new Push-Button Switch Kit 80932002''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Powered Roller Cutout Junction Box&lt;/big&gt;''''' ====<br /> [[File:BE-TS Powered Roller Cutout Junction Box.png|alt=BE-TS Powered Roller Cutout Junction Box|frameless|535x535px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |3<br /> |-<br /> |4<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |4<br /> |-<br /> |5<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |7<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |''Mounting bolts (Not shown)''<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Level Assist&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Level Assist.png|alt=BE-TS Level Assist|frameless|568x568px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1321A<br /> |PHOTO EYE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |13537001-2<br /> |MOUNT-PHOTO EYE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |PL0502<br /> |GROMMET<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43837007<br /> |TARGET ANGLE<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |E0376<br /> |INDICATOR LIGHT<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |7<br /> |HW0152<br /> |WASHER-5/8&quot; I.D.<br /> |<br /> |''†† See notes (Not shown)''<br /> |2<br /> |-<br /> |8<br /> |E1321-RT<br /> |REFLECTIVE TAPE<br /> |<br /> |''(Not shown)''<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''Location of Indicator Light on the dash may vary from location shown''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Extractors built prior to October 2021 used Multi-Piece Indicator Lights with Replaceable Bulb and Lens are no longer available. Current Indicator Light is a 1-Piece LED Assembly. Replacement of any Multi-Piece Component requires replacing entire assembly with current, 1-Piece Indicator Light.''<br /> |-<br /> | colspan=&quot;6&quot; |''††† Washers required for units that did not ship with Level Assist option from the factory.''<br /> |}<br /> '''&lt;big&gt;''Level Assist Junction Box''&lt;/big&gt;'''<br /> <br /> [[File:BE-TS Level Assist Junction Box.png|alt=BE-TS Level Assist Junction Box|frameless|524x524px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |4<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |5<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |''Mounting bolts (Not shown)''<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Blue Light&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Blue Light.png|alt=BE-TS Blue Light|frameless|611x611px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |EW2002B<br /> |BLUE PROJECTION SPOTLIGHT<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW0401<br /> |BOLT-HHCS-3/8-16 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0107<br /> |WASHER-LOCK-3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |4<br /> |-<br /> |5<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43835001<br /> |STANCHION-POWER<br /> |<br /> |<br /> |2<br /> |}<br /> [[File:BE-TS Blue Light Enclosure.png|alt=BE-TS Blue Light Enclosure|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-8&quot; X 8&quot; X 4&quot;<br /> |<br /> |''Consult factory''<br /> |1<br /> |-<br /> |2<br /> |E0135<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |''Blank panel without holes''<br /> |1<br /> |-<br /> |3<br /> |PS5R-SC12<br /> |POWER SUPPLY<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0908<br /> |MOUNTING RAIL<br /> |<br /> |''Sold by length''<br /> |A/R<br /> |-<br /> |5<br /> |YE0402<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |YE0405<br /> |END BARRIER<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |YE0406<br /> |END ANCHOR<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |E0341<br /> |GROUND LUG<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |3<br /> |-<br /> |10<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |11<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |''2 per Mounting Rail''<br /> |5<br /> |-<br /> |12<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |''2 per Mounting Rail''<br /> |5<br /> |-<br /> |13<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |''2 per Mounting Rail''<br /> |5<br /> |-<br /> |14<br /> |00196404<br /> |LABEL-DANGER<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Water Cart&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Water Cart.png|alt=BE-TS Water Cart|frameless|549x549px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PB0033<br /> |OVERFILL INDICATOR<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |PB0034<br /> |LOCKNUT-CONDUIT-2&quot;-NYLON<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0308<br /> |FILLER/BREATHER ASSEMBLY<br /> |<br /> |Includes gaskets<br /> |1<br /> |-<br /> |4<br /> |HW0209<br /> |SCREW-RHMS-10-32 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |5<br /> |550-057<br /> |HOSE-FILL-3/4&quot; X 15'<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |550-027<br /> |ON/OFF VALVE<br /> |<br /> |''(Not shown)''<br /> |1<br /> |-<br /> |7<br /> |PB0902<br /> |HOSE-3/4&quot;<br /> |<br /> |<br /> |30&quot;<br /> |-<br /> |8<br /> |HW1018<br /> |HOSE CLAMP-3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |PB0603<br /> |ADAPTER-3/4&quot; NPT X 3/4&quot; BARB<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |PB0456<br /> |ELBOW-STR-90 DEG-3/4&quot; NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |PB0451<br /> |ADAPTER-3/4&quot; NPT X 3/4 GHT<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |PB0302<br /> |PLUG-3/4&quot; NPT<br /> |<br /> |<br /> |<br /> |-<br /> |13<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |14<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |SS0106<br /> |SHCS-#10-24 X 1/2&quot;-SST<br /> |<br /> |<br /> |6<br /> |-<br /> |16<br /> |SS0114<br /> |BHSCS-#10-24 X 1/2&quot; SST<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |SS0301<br /> |WASHER-FLAT-#10-SAE-SST<br /> |<br /> |<br /> |10<br /> |-<br /> |18<br /> |00196701<br /> |DECAL-BHS-12&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |00196404<br /> |LABEL-DANGER-&quot;120 VOLTS&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |20<br /> |00166648<br /> |LABEL, NON-POTABLE<br /> |<br /> |<br /> |1<br /> |-<br /> |21<br /> |HW0418<br /> |BOLT-HHCS-3/8-16 X 2-1/4&quot;<br /> |<br /> | rowspan=&quot;3&quot; |''Mounting bolts'' <br /> <br /> ''(Not shown)''<br /> |2<br /> |-<br /> |22<br /> |HW0031<br /> |NUT-HEX-3/8-16 CENTERLOCK<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |2<br /> |}<br /> [[File:BE-TS Water Cart 2.png|alt=BE-TS Water Cart|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1511<br /> |SWITCH-ROCKER<br /> |<br /> |Submersible rated<br /> |1<br /> |-<br /> |2<br /> |E0378<br /> |INDICATOR LIGHT-120VAC-GREEN<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |3<br /> |E0376<br /> |INDICATOR LIGHT-120VAC-AMBER<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |4<br /> |E0377<br /> |INDICATOR LIGHT-120VAC-RED<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |5<br /> |46917015<br /> |PLACARD-INDICATOR LIGHT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0505<br /> |16-3 SO CORD<br /> |<br /> |<br /> |72&quot;<br /> |-<br /> |7<br /> |E0653<br /> |PLUG-120V/15A<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |9<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |PL0501<br /> |GROMMET-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |E1313<br /> |SOCKET-RELAY-8 PIN<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |E0331<br /> |RELAY-DPDT-110VAC<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |E0440<br /> |TERMINAL BLOCK-8 POLE<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |E1070<br /> |GROUND BAR-4 POSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |HW0139<br /> |SCREW-RHMS-#8-32 X 1 1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |HW0135<br /> |SCREW-RHMS-#8-32 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW1061<br /> |SCREW-RHMS-#8-32 X 1&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |5<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Water carts built prior to October 2021 used Multi-Piece Indicator Lights with Replaceable Bulb and Lens and are no longer available. Current Indicator Lights are a 1-Piece LED Assemblly.'' <br /> <br /> ''Replacement of any Mutli-Piece component requires replacing entire assembly with current 1-Piece Indicator Light.'' <br /> |}<br /> <br /> = &lt;big&gt;Service &amp; Maintenance&lt;/big&gt; =<br /> <br /> == &lt;big&gt;Daily Inspection List&lt;/big&gt; ==<br /> The points listed below should be visually inspected daily prior to initial start up of the Battery Extractor to ensure safe and proper operation of the unit and to help avoid unnecessary down time.<br /> <br /> # Walk around unit and inspect for any physical damage to machine not previously noted.<br /> # Verify all guards are in place.<br /> # Inspect the AC power feed for any damage.<br /> # Vacuum equipped units: Inspect vacuum cups for damage to cup sealing surface, backup casting, and vacuum hoses. Magnet equipped units: Inspect magnets for damage to attachment face, proximity sensor cover, cables and connections.<br /> # Inspect travel path and area around unit for any hydraulic oil that could be a potential repair/maintenance issue and/or safety hazard.<br /> # Check oil level in hydraulic reservoir at fill level gauge.<br /> # Check that operator safety gate and all safety switches are in proper working order.<br /> # Verify extractor path is free of obstructions.<br /> # Check roller beds for any debris and clean as required.<br /> # Board unit, engage system and verify all functions are operating properly and that no abnormal or unusual noises are present.<br /> <br /> ''* Use form IF-5008 when preforming daily inspections''<br /> <br /> == &lt;big&gt;Operator's Daily Checklist&lt;/big&gt; ==<br /> [[File:BE-TS Operator's Daily Checklist.png|alt=BE-TS Operator's Daily Checklist|frameless|1180x1180px]]<br /> <br /> == &lt;big&gt;Recommended Battery Extractor Lubrication Intervals&lt;/big&gt; ==<br /> {| class=&quot;wikitable&quot;<br /> !Lubrication Task<br /> !'''# of Places'''<br /> !Intervals<br /> |-<br /> |'''1. Lubricate grease fittings using #2 lithium based grease'''<br /> |<br /> |<br /> |-<br /> |A. Extractor arm drive nut and carrier bearings<br /> |5 places<br /> |50 hrs / Weekly<br /> |-<br /> |B. Idler casters<br /> |2 places<br /> |200 hrs / Weekly<br /> |-<br /> |'''2. Wipe off and lubricate chains using light machine oil'''<br /> |<br /> |<br /> |-<br /> |A. #80 Lift chains (Not applicable to BE-SL units)<br /> |4 places<br /> |200 hrs / Monthly<br /> |-<br /> |B. #60 Equalization chains<br /> |4 places<br /> |200 hrs / Monthly<br /> |-<br /> |C. #35 Powered roller chains<br /> |8 places<br /> |200 hrs / Monthly<br /> |-<br /> |'''3. Change return line hydraulic fluid filter'''<br /> ''(Oil filtration of at least 20 microns is recommended)''<br /> |1 place<br /> |300 hrs / Twice Quarterly<br /> |-<br /> |'''4. Change hydraulic fluid'''<br /> | -<br /> |600 hrs / Quarterly *<br /> |-<br /> |'''5. Complete preventative maintenance (PM)'''<br /> Use form IF-5029 for Vacuum equipped units.<br /> <br /> Use form IF-5028 for Magnet equipped units.<br /> | -<br /> |600 hrs / Quarterly<br /> |-<br /> ! colspan=&quot;3&quot; |NOTES<br /> |-<br /> | colspan=&quot;3&quot; |''These recommendations are based on average use in a typical warehouse environment and may be adjusted based on specific circumstances. Dusty and/or extreme hot/cold environments may require more frequent lubrication.''<br /> |-<br /> | colspan=&quot;3&quot; |''* BHS recommends implementing an oil sampling and analysis program to monitor hydraulic fluid condition and determine when hydraulic fluid changes are required. The fluid analysis program should be a continuous process and all results should be evaluated. Changes in the condition of the hydraulic system may indicate component wear, fluid deterioration and/or contamination.''<br /> |}<br /> {|<br /> |[[File:NOTICE-warn.png|alt=NOTICE|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:NOTICE-warn.png]]<br /> |<br /> *'''The mounted bearings used on the power rollers, equalization shafts, drive wheels, and drive screw are sealed and shielded bearings. Lubrication may breach the seals of these bearings, therefore these bearings should not be lubricated unless the machine has been cleaned with a high pressure wash on a regular basis (not recommended).'''<br /> *'''Hydraulic fluid should not exceed 140°F (60°C) for extended periods.'''<br /> |}<br /> ===&lt;big&gt;'''&lt;u&gt;Reservoir Capacities ''(APPROX.)''&lt;/u&gt;'''&lt;/big&gt;===<br /> {|<br /> |BE-SL<br /> |18 gal (68 L)<br /> |-<br /> |BE-DS<br /> |18 gal (68 L)<br /> |-<br /> | rowspan=&quot;2&quot; |BE-TS<br /> |30 gal (114 L) ''(Units built Pre-2014)''<br /> |-<br /> |45 gal (170 L) ''(Units built 2014 to Present)''<br /> |-<br /> |BE-QS<br /> |60 gal (227 L)<br /> |}The reservoir should be filled so fluid level is within a half inch (1/2&quot;) of the top of sight glass. Use Chevron AW 68 or equivalent ISO 68 grade hydraulic oil with anti-wear additives and foam suppressant.<br /> <br /> '''''NOTE'':''' Some units shipped from the factory with AW 32 oil for cold environment operation. Units using AW 32 from the factory may experience poor performance if AW 68 is used instead of AW 32 due to the increased viscosity of the oil.<br /> <br /> ==&lt;big&gt;Preventative Maintenance Reports&lt;/big&gt;==<br /> ===&lt;big&gt;&lt;u&gt;Vacuum Extraction&lt;/u&gt;&lt;/big&gt;===<br /> [[File:Battery Extractor Series - Vacuum Extraction Planned Maintenance Inspection Report Page 1.png|alt=Battery Extractor Series - Vacuum Extraction Planned Maintenance Inspection Report Page1|frameless|1238x1238px|link=https://tech.bhs1.com/index.php/File:Battery_Extractor_Series_-_Vacuum_Extraction_Planned_Maintenance_Inspection_Report_Page_1.png]]<br /> <br /> [[File:Battery Extractor Series - Vacuum Extraction Planned Maintenance Inspection Report page2.png|alt=Battery Extractor Series - Vacuum Extraction Planned Maintenance Inspection Report Page 2|frameless|1230x1230px|link=https://tech.bhs1.com/index.php/File:Battery_Extractor_Series_-_Vacuum_Extraction_Planned_Maintenance_Inspection_Report_page2.png]]<br /> ===&lt;big&gt;&lt;u&gt;Magnet Extraction&lt;/u&gt;&lt;/big&gt;===<br /> [[File:Battery Extractor Series - Magnet Extraction Planned Maintenance Inspection Report Page 1.png|alt=Battery Extractor Series - Magnet Extraction Planned Maintenance Inspection Report Page 1|frameless|1224x1224px|link=https://tech.bhs1.com/index.php/File:Battery_Extractor_Series_-_Magnet_Extraction_Planned_Maintenance_Inspection_Report_Page_1.png]]<br /> <br /> [[File:Battery Extractor Series - Magnet Extraction Planned Maintenance Inspection Report Page 2.png|alt=Battery Extractor Series - Magnet Extraction Planned Maintenance Inspection Report Page 2|frameless|1233x1233px|link=https://tech.bhs1.com/index.php/File:Battery_Extractor_Series_-_Magnet_Extraction_Planned_Maintenance_Inspection_Report_Page_2.png]]<br /> <br /> ==&lt;big&gt;80292002-i – Equalization Chain Installation / Resetting Procedure&lt;/big&gt;==<br /> ===&lt;big&gt;&lt;u&gt;Required Tools&lt;/u&gt;&lt;/big&gt;===<br /> *Large standard screwdriver<br /> *1/8&quot;, 5/32&quot;, 3/16&quot; Allen wrench<br /> *(2) 1-1/8&quot; Open-end wrenches<br /> *Needle nose pliers<br /> *6&quot; Steel scale (ruler)<br /> *Brake cleaner (non-chlorinated)<br /> *Loctite #242 (blue)<br /> *80292002 - E.Q. Adjustment stop kit (SL, DS, TS) or 80492001 - BE-QS E.Q. Adjustment stop kit<br /> *Ladder or work platform ''(see notes)''<br /> ===&lt;big&gt;&lt;u&gt;''Optional Tools''&lt;/u&gt;&lt;/big&gt;===<br /> *Wire brush for removing Loctite from components prior to reassembly<br /> ===&lt;big&gt;&lt;u&gt;Notes&lt;/u&gt;&lt;/big&gt;===<br /> *''A ladder, man lift or other device is required to access the upper E.Q. studs on BE-TS and BE-QS units.''<br /> *''The following procedures must be performed with the extractor unloaded and in a level area of the travel path.''<br /> *''Installation of the E.Q. stop kit requires (4) persons plus a trained battery extractor operator to raise and lower the inner carriage.''<br /> *''It is recommended to have new E.Q. chain connecting links on hand prior to performing the following procedures.''<br /> *''The upper E.Q. stud lock washers cannot be reused and must be replaced prior to reassembly.''<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Page 369 Image 0001.png|alt=BE-TS with EQ Adjustment Stops Installed|none|thumb|300x300px|BE-TS with EQ Adjustment Stops Installed|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Page_369_Image_0001.png]]<br /> ===&lt;big&gt;&lt;u&gt;IMPORTANT&lt;/u&gt;&lt;/big&gt;===<br /> *'''Read and understand the Safety and De-energization Procedure TP-606 before starting this procedure.'''<br /> *'''Read and understand these instructions completely before starting this procedure.'''<br /> ===&lt;big&gt;&lt;u&gt;Procedure&lt;/u&gt;&lt;/big&gt;===<br /> 1. Remove the inner and outer frame guards to access the lower equalization studs.<br /> <br /> 2. Raise the inner frame approximately 30&quot; (762 mm) for SL, DS and TS units or 50&quot; (1270 mm) for QS units from the fully lowered position. Install (1) adjustment stop at each corner of the roller bed. See Figure 1.[[File:IOP-400 BE-SL&amp;DS (10-23) EQ Chain Instructions-Figure1.png|alt=|none|thumb|375x375px|FIGURE 1|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_EQ_Chain_Instructions-Figure1.png]]3. Slowly lower the inner carriage until the roller bed is firmly and securely seated against all four stops. See Figure 2.[[File:IOP-400 BE-SL&amp;DS (10-23) Page 370 Image 0002.png|alt=Roller bed firmly seated against all four stops|none|thumb|398x398px|FIGURE 2|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Page_370_Image_0002.png]]4. Lockout/tagout the B.E. per your corporate policy.<br /> <br /> 5. De-energize the B.E. per BHS Safety and De-energization procedure TP-606.<br /> <br /> 6. Loosen and remove the upper hex nuts and remove the upper chain studs. Remove the lock washers from the upper chain studs. Save the hex nuts for reassembly later. Discard the lock washers and obtain new, 3/4&quot; split-ring lock washers for reassembly.<br /> <br /> 7. If replacing the chain, remove the upper stud and remove the chain from the lower stud. Discard the connecting links.<br /> *''If the E.Q. chains are being reset due to a connecting link failure, it is recommended to also replace the stud where the connecting link failed.''<br /> *''It is recommended to replace the connecting links when replacing or resetting the E.Q. chains.''<br /> 8. If replacing a lower stud, remove the connecting link and disconnect the chain. Loosen the hex nut and remove the stud. Remove the hex nut from the old stud and reinstall it on the new stud. Reinstall the new stud so that it is flush with the bottom of the frame and the hole is aligned front-to-back with the extractor.<br /> <br /> 9. Attach the chains to the lower studs using the connecting links. Attach the upper studs to the chains using the connecting links, making sure the nut is threaded down near the connecting link and lay the chains in the frame. See Figure 3.<br /> *''Do not fully assemble the lower connecting links by bending the cotter pins as the connecting link may need to be removed later for stud adjustment.''[[File:IOP-400 BE-SL&amp;DS (10-23) EQ Chain Attached to Upper Stud.png|alt=BE-TS Chain Attached to Upper Stud|none|thumb|300x300px|FIGURE 3|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_EQ_Chain_Attached_to_Upper_Stud.png]]<br /> 10. If new E.Q. sprockets are to be installed, remove the clamp collars and old sprockets. Install the new sprockets and reinstall the clamp collars. DO NOT tighten the set screws at this point as adjustment/alignment may be required.<br /> *''Sprockets MUST be keyed in-line.''<br /> 11. Align the E.Q. shafts so that the keyways are in the 2 o'clock position (approximately 60 degrees from vertical). This will bring the sprocket set screws to the top of the sprocket when the inner carriage is lowered. See Figure 4.[[File:IOP-400 BE-SL&amp;DS (10-23) EQ Shafts aligned 60 Degrees from Vertical.png|alt=BE-TS EQ Shafts aligned 60 Degrees from Vertical|none|thumb|300x300px|FIGURE 4|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_EQ_Shafts_aligned_60_Degrees_from_Vertical.png]]12. Starting with the inside chain, route the chain over the sprocket directly above the lower stud and under the inside sprocket on the opposite shaft. Attach the upper stud to the top cross bar, making sure a new 3/4&quot; split -ring lock washer is installed between the cross bar and lower hex nut. Hand tighten the upper stud adjusting nut to remove slack from the chain. See Figure 5.<br /> <br /> 13. Route the outer chain over the sprocket, above the stud and under the sprocket on the opposite shaft. Attach the upper stud to the top cross bar, making sure a new, 3/4&quot; split-ring lock washer is installed between the cross bar and lower hex nut. Hand tighten the upper stud adjusting nut to remove slack from the chain. See Figure 5.<br /> *''It is recommended to begin at the operator end where room is limited allowing easier access at the opposite end to route the chain under the final sprocket.''<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Inside and Outside EQ Chains.png|alt=BE-TS Inside and Outside EQ Chains|none|thumb|499x499px|FIGURE 5|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Inside_and_Outside_EQ_Chains.png]]14. Repeat steps 11 through 13 for the opposite side of the extractor. It is likely that a large, standard screwdriver will be necessary to position the final chain over the sprocket. See Figure 6.[[File:IOP-400 BE-SL&amp;DS (10-23) Page 371 Image 0002.png|alt=It is likely that a large, standard screwdriver will be necessary to position the final chain over the sprocket.|none|thumb|300x300px|FIGURE 6|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Page_371_Image_0002.png]]15. Adjust the lower studs up or down as necessary to take the slack out of the chain between the lower studs and the sprockets by removing the connecting link from the stud and turning the stud. Tighten the hex nuts against the frame once the studs have been adjusted. Reattach the chain.<br /> *DO NOT allow the stud to twist when tightening the hex nuts.<br /> 16. Tighten the upper hex nut on the upper studs until there is approximately 1/4&quot; (7 mm) of total deflection in the middle of the upper, vertical chain sections. Tighten the lower hex nuts on the upper studs to lock the studs in place.<br /> *''Each section of chain between the sprockets should have approximately the same tension as the other on the same side. See Figure 5.''<br /> 17. Raise the inner frame and remove the adjustment stops from the four corners and lower the inside frame.<br /> <br /> 18. Verify equalization sprocket and stud alignment by using a 6&quot; scale. Measure the distance from the inside roller bed frame to the center of the equalization stud. Compare this distance with the measurements from the inside roller bed frame to the center-lines of the sprockets. Adjust the position of the sprocket as necessary to make the distances equal. This will ensure the chain and sprockets are in line with the stud. Repeat this process for the three remaining chains. See Figures 7 &amp; 8.<br /> <br /> 19. Raise and lower the inner frame several times and listen for any chain popping noises to confirm the sprockets are in line with the lower studs. If there is no popping noise, lower the inner frame all the way down.[[File:IOP-400 BE-SL&amp;DS (10-23) EQ Chain Verify equalization sprocket and stud alignment by using a 6in scale-Fig7.png|alt=BE-TS EQ Chain Procedure Figure 7 - Verify equalization sprocket and stud alignment by using a 6&quot; scale|none|thumb|300x300px|FIGURE 7|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_EQ_Chain_Verify_equalization_sprocket_and_stud_alignment_by_using_a_6in_scale-Fig7.png]][[File:IOP-400 BE-SL&amp;DS (10-23) EQ Chain Verify equalization sprocket and stud alignment by using a 6in scale-Fig8.png|alt=BE-TS EQ Chain Verify equalization sprocket and stud alignment by using a 6in scale - Fig 8|none|thumb|300x300px|FIGURE 8|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_EQ_Chain_Verify_equalization_sprocket_and_stud_alignment_by_using_a_6in_scale-Fig8.png]]20. Clean any existing, hardened Loctite from the sprockets, sprocket sets screws, clamp collars and clamp collar bolts.<br /> <br /> 21. Apply Loctite to and tighten the set screws on the sprockets. Slide the clamp collars against the outside sprocket, loctite and tighten the clamp collars.<br /> ==&lt;big&gt;80292001-i – Battery Extractor Service Stand Installation Instructions&lt;/big&gt;==<br /> ===&lt;big&gt;&lt;u&gt;Required Tools&lt;/u&gt;&lt;/big&gt;===<br /> None<br /> ===&lt;big&gt;&lt;u&gt;Notes&lt;/u&gt;&lt;/big&gt;===<br /> *''Refer to kit part # 80292001 or 80392001 for the complete bill of materials supplied.''<br /> *''Remove ALL batteries from extractor prior to installation / service.''<br /> *''Installation of service stands requires (2) persons plus a trained battery extractor operator to raise and lower the inner carriage. DO NOT attempt installation with less than (3) persons.''<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Single Level Service Stand Properly Installed.png|alt=Single Level Service Stand Properly Installed|none|thumb|368x368px|Single Level Service Stand Properly Installed|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Single_Level_Service_Stand_Properly_Installed.png]]<br /> ===&lt;big&gt;&lt;u&gt;IMPORTANT&lt;/u&gt;&lt;/big&gt;===<br /> *'''Read and understand the Safety and De-energization Procedure TP-606 before starting this procedure.'''<br /> *'''Read and understand these instructions completely before starting this procedure.'''<br /> ===&lt;big&gt;&lt;u&gt;Procedure&lt;/u&gt;&lt;/big&gt;===<br /> 1. Have a qualified operator raise the inner carriage of the extractor to the required height for installation. For single level applications, the required height will be approximately 25&quot; (64 cm) from the fully lowered position. For double, triple, and quad stack machines, the required height will be approximately 55&quot; (140 cm) from the fully lowered position.<br /> *On double, triple, and quad stack battery extractors, the operator either must remain on the operator platform during service or be provided an OSHA approved method of egress. This is not applicable to single level battery extractors as the operator platform height is fixed.<br /> 2. Install the stands by engaging the top of the stand into the inner carriage cutouts. Place the bottom channel of the stand over the tube of the outer frame. The top flanges of each stand are tapered to aid in proper alignment of the stand with the inner frame.<br /> <br /> See Figures 1 &amp; 2.[[File:IOP-400 BE-SL&amp;DS (10-23) engaging the top of the stand into the inner carriage cutout.png|alt=Properly seated in cutout|none|thumb|300x300px|FIGURE 1|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_engaging_the_top_of_the_stand_into_the_inner_carriage_cutout.png]][[File:IOP-400 BE-SL&amp;DS (10-23) Page 374 Image 0005.png|none|thumb|300x300px|FIGURE 2|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Page_374_Image_0005.png]]3. Once BOTH stands have been properly placed, SLOWLY lower the inner carriage while the stands are held in place.<br /> <br /> 4. Once the inner carriage is firmly seated on the service stands, verify the stands are securely installed. See Figure 3.[[File:IOP-400 BE-SL&amp;DS (10-23) Page 374 Image 0006.png|none|thumb|450x450px|FIGURE 3|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Page_374_Image_0006.png]]<br /> ==&lt;big&gt;Trouble Shooting Guide&lt;/big&gt;==<br /> {| class=&quot;wikitable&quot;<br /> !Problem Symptom<br /> !Probable Cause<br /> !Solution<br /> |-<br /> |Hydraulic power Unit does not operate.<br /> No electric to power unit motor.<br /> |1. No AC power to Unit.<br /> 2. Reset on magnetic motor starter tripped.<br /> <br /> 3. Gate switch not actuated.<br /> <br /> 4. Foot Pedal switch not engaged.<br /> <br /> 5. Emergency Stop switch is depressed.<br /> |1. Check fuses or breaker.<br /> 2. Check reset button.<br /> <br /> 3. Make sure safety gate is engaging switch.<br /> <br /> 4. Check foot pedal for obstruction.<br /> <br /> 5. Reset button using machine key.<br /> |-<br /> |Power unit runs but no pressure reading at gauge,<br /> also no functions move.<br /> |1. AC input is in reverse phase. Motor is running backwards.<br /> 2. Main system relief valve stuck open or defective.<br /> <br /> 3. Coupling between motor and pump loose.<br /> |1. Reverse any two of the three hot lines to unit.<br /> 2. Check relief valve cartridge for trash or debris.<br /> <br /> Replace as required.<br /> <br /> 3. Inspect coupling assy.<br /> |-<br /> |Magnetic starter contact chatters-at startup.<br /> Contact chatters while traveling.<br /> |1. 1 leg of 3 phase input power out.<br /> 2. Safety gate and/or gate switch out of adjustment.<br /> |1. Check fuse or circuit breaker at service panel.<br /> 2. Check and adjust gate or switch as required to<br /> <br /> ensure full engagement of plunger on gate<br /> <br /> switch and that the safety gate is not bouncing<br /> <br /> due to vibration.<br /> |-<br /> |No floor travel empty or loaded-all other functions work properly.<br /> |1. Extractor arm off center-left to right.<br /> 2. Proximity switch or sensing bracket out of target range.<br /> <br /> 3. Proximity switch defective or broken.<br /> <br /> 4. Bad solenoid coil on floor cutout valve.<br /> <br /> 5. Spool on floor cutout valve stuck open.<br /> |1. Center arm.<br /> 2. Adjust as needed to achieve 1/4” clearance.<br /> <br /> 3. Check switch and replace.<br /> <br /> 4. Check solenoid and replace if needed.<br /> <br /> 5. Remove and clean spool cartridge or replace.<br /> |-<br /> |Floor travel moves but is sluggish<br /> and stalls with a load at certain points.<br /> |1. Uneven floor conditions. High/low spots.<br /> 2. Excessive tire wear.<br /> <br /> 3. Wheel shaft-to-motor shaft coupling on drive wheel assembly loose or broken.<br /> <br /> 4. Debris lodged under battery extractor.<br /> |1. Check flatness of floor. Check guidance track for scraping of guide arm on top of angle.<br /> 2. Measure under clearance of battery extractor. Should be no less than 5/8” replace poly wheels as needed.<br /> <br /> 3. Inspect drive assembly while under load to see if shafts and couplings are moving in unison. Repair as needed.<br /> <br /> 4. Inspect under unit and remove debris.<br /> |-<br /> |Inner carriage bounces while lifting under load,<br /> but not when empty.<br /> |1. Down speed adjustment valve open too far.<br /> |1. Adjust as needed to eliminate carriage bounce.<br /> |-<br /> |Inner carriage does not lift evenly.<br /> Four corners do not land evenly against outer frame tube.<br /> |1. Equalization chains are out of adjustment.<br /> 2. Excessive chain or sprocket wear.<br /> <br /> 3. Equalization chains are out of synchronization. Possibly may have jumped a sprocket tooth.<br /> <br /> 4. Broken bearing housing on mounted shaft.<br /> <br /> 5. Lift cylinder roping chains out of adjustment.<br /> |1. Readjust with the top stud until equal tension is achieved.<br /> 2. Replace as needed.<br /> <br /> 3. Evaluate and resynchronize as required.<br /> <br /> 4. Inspect and replace.<br /> <br /> 5. Readjust as needed to equal tension on all four cylinders in full down position.<br /> |}<br /> =&lt;big&gt;Aftermarket Support&lt;/big&gt;=<br /> [https://na.bhs1.com/blog/post/tt-922-technical-support Click here] for details on BHS' Aftermarket Support.<br /> =&lt;big&gt;Statement of Warranty&lt;/big&gt;=<br /> [https://store.bhs1.com/warranty Click here] for details on BHS' Statement of Warranty.</div>

Kperrier https://tech.bhs1.com/index.php?title=(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)&diff=7660 2024-03-13T20:44:17Z

<p>Kperrier: Finished adding manual</p> <hr /> <div>'''Looking for a specific replacement part?''' Ctrl-F (or Command-F for Mac users) brings up your browsers search panel and can search any text on the entire web page. Find parts by searching a part # or part description.<br /> <br /> '''Register your equipment with [https://na.bhs1.com/media-library/bhs-optima/ BHS Optima], BHS's free app.'''<br /> <br /> '''California Residents''': WARNING: This product contains chemicals known to the State of California to cause cancer and/or reproductive harm, and birth defects or other reproductive harm. [https://na.bhs1.com/about-bhs/compliance-statement-for-california-proposition-65/ Learn more here.]<br /> =&lt;big&gt;Preface&lt;/big&gt;=<br /> =&lt;big&gt;TP-606 – Safety &amp; De-Energization Procedures&lt;/big&gt;=<br /> ==&lt;big&gt;General Safety&lt;/big&gt;==<br /> {|<br /> |[[File:Read Before Operating Notice.png|alt=Read Before Operating|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:Read_Before_Operating_Notice.png]]<br /> |<br /> *Read and understand all instructions and warnings before using or servicing this equipment.<br /> *Keep these instructions for future reference.<br /> |}<br /> *Battery Extractor (BE) units shall only be operated by suitable persons of at least 18 years of age, who have been trained in the proper and safe operation of the BE and expressly certified/charged, in writing, by the user or their representative.<br /> *Only one person is permitted to travel on the BE at any time.<br /> *BE units shall only be used indoors in an industrial setting on a hard, nonslip, and level floor without defects including but not limited to holes, gouges, cracks, drains or obstacles comprised of concrete or other suitable industrial material meeting the minimum requirements specified by BHS as well as any local requirements.<br /> *A licensed structural engineer should be consulted prior to installing a BE on any building level other than the ground floor.<br /> *BE units are not designed to be shipped or transported after initial delivery.<br /> *Failure to follow these instructions and warnings may result in property damage, personal injury or death.<br /> ===&lt;big&gt;&lt;u&gt;Work Area&lt;/u&gt;&lt;/big&gt;===<br /> *Keep work area clean and well lit. Cluttered work areas and poor lighting can lead to accidents.<br /> *Clean up/contain any fluid spills immediately to prevent slips or falls.<br /> *Be aware of potential hazards when performing any service or maintenance to the unit.<br /> ===&lt;big&gt;&lt;u&gt;Service &amp; Maintenance&lt;/u&gt;&lt;/big&gt;===<br /> Service personnel shall wear Personal Protective Equipment (PPE) appropriate for the task being performed.<br /> {|<br /> |[[File:Electrical Hazard Warning.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Electrical_Hazard_Warning.png]]<br /> [[File:Danger Warning.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Danger_Warning.png|alt=DANGER]]<br /> |<br /> ===&lt;big&gt;&lt;u&gt;Lockout/Tagout&lt;/u&gt;&lt;/big&gt;===<br /> '''Lockout/tagout the BE per your corporate policy, if damaged or not functioning properly. Lockout/tagout and de-energize all systems prior to performing any maintenance or service to unit.'''<br /> |}<br /> {|<br /> |[[File:Warning-Battery-Explosion.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Warning-Battery-Explosion.png]]<br /> [[File:Danger Warning.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Danger_Warning.png|alt=DANGER]]<br /> |<br /> ===&lt;big&gt;&lt;u&gt;Lead-Acid Battery Explosion Hazard&lt;/u&gt;&lt;/big&gt;===<br /> '''DO NOT allow open flames or sparks of any kind near a battery. Highly explosive gas is generated when charging a battery that can remain in battery cells for extended periods of time after charging is complete.'''<br /> *Always wear appropriate PPE including rubber apron, gloves, boots and full face shield when performing service or maintenance to any lead-acid batteries.<br /> *DO NOT place metal or other conductive objects on top of battery. Arcing may occur causing damage to the battery and/or serious personal injury or death.<br /> *Use only chargers matching the voltage and amperage of the battery being charged. Overcharging a battery can cause damage to the battery, charger and/or serious personal injury or death.<br /> *Turn off charger before disconnecting battery from charger. Arcing between battery and charger connectors can cause damage to the connectors and/or serious personal injury or death.<br /> |}<br /> {|<br /> |[[File:Warning-Hydrualic-Hazard.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Warning-Hydrualic-Hazard.png]]<br /> [[File:Warning.png|alt=WARNING|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Warning.png]]<br /> |<br /> ===&lt;big&gt;&lt;u&gt;Hydraulic Hazards&lt;/u&gt;&lt;/big&gt;===<br /> '''AVOID HIGH PRESSURE FLUIDS-Escaping fluid under pressure can penetrate the skin causing serious injury. Relieve pressure before disconnecting hydraulic lines. Tighten all connections before applying pressure. Keep hands and body away from pin holes which eject fluids under high pressure. Use a piece of cardboard or paper to search for leaks. DO NOT use your hand.'''<br /> <br /> '''Any fluid injected into the skin under high pressure should be considered a serious medical emergency despite an initial normal appearance of the skin. There will be a delayed onset of pain, and serious tissue damage may occur. Medical attention should be sought immediately.'''<br /> |}<br /> {|<br /> ![[File:No Pacemakers Notice.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:No_Pacemakers_Notice.png]][[File:Strong Magnet Field Hazard Warning.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Strong_Magnet_Field_Hazard_Warning.png]]<br /> [[File:Warning.png|alt=WARNING|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Warning.png]]<br /> |<br /> ===&lt;big&gt;&lt;u&gt;Electromagnet Hazard&lt;/u&gt;&lt;/big&gt;===<br /> '''Units equipped with magnetic extraction generate strong magnetic fields. Persons with pacemakers &lt;u&gt;SHOULD&lt;/u&gt;''' &lt;u&gt;'''NOT'''&lt;/u&gt; '''operate or be in close proximity to equipment during operation.'''<br /> <br /> '''Failure to comply with this direction''' '''could result in serious personal injury or death.'''<br /> |}<br /> ===&lt;big&gt;&lt;u&gt;Operational Safety&lt;/u&gt;&lt;/big&gt;===<br /> *Only personnel trained in the proper and safe operation of BE units may operate or service the BE.<br /> *Operators shall wear appropriate PPE suitable for working with industrial lead-acid batteries while operating the BE ''(See [https://tech.bhs1.com/index.php/(BE-SL_%26_-DS)_Single_Level_%26_Double_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-400)#Lead-Acid_Battery_Explosion_Hazard Lead-Acid Battery Explosion Hazard] section).''<br /> *All data plates, warning labels, placards, etc. shall be in place and legible at all times. Contact BHS for re-placement data plates, warning labels, placards or instructions.<br /> *All users and service personnel shall be familiar with the meaning and risks associated with all data plates, warning labels, etc.<br /> *All operators and service personnel shall be aware of potential crush and shear points while operating or servicing the BE.<br /> *Keep hands and arms inside the operator compartment while operating the BE.<br /> *Remove BE from service if damaged, defective, or operating improperly (or becomes such while operating) until repairs can be made to correct any problem(s).<br /> *All operators shall be aware of the location of the end stops in the travel path to prevent driving the BE into the end stops.<br /> ===&lt;u&gt;&lt;big&gt;Do's and Don'ts&lt;/big&gt;&lt;/u&gt;===<br /> *'''DO NOT''' exceed the maximum capacity of the BE.<br /> *'''DO NOT''' modify or fit the BE with attachments without prior, written approval from BHS.<br /> *'''DO NOT''' perform any maintenance or service to the BE with a battery loaded on the BE.<br /> *'''DO NOT''' allow anyone to ride in or on the BE.<br /> *'''DO NOT''' operate the BE with any guard or cover removed unless required for maintenance or repair.<br /> *Disconnect the BE from all power sources before attempting to perform service or maintenance to the unit.<br /> *'''DO NOT''' drive the BE into the end stops.<br /> *'''DO NOT''' operate the BE if disengaged from the guidance track.<br /> *'''DO NOT''' allow a battery to exit the BE when a lift truck or battery stand is not present to accept the battery.<br /> *'''DO NOT''' rotate the arm onto a battery such that any part of the extractor arm, vacuum cup or magnet contacts the top of the battery.<br /> *'''DO NOT''' allow anyone to enter the area under the carriage without the service stands properly installed.<br /> *'''DO NOT''' use the BE in a manner for which it is not intended. Some examples of prohibited use are but not limited to:<br /> **To transport people<br /> **As a vehicle jack<br /> **To lift loads greater than its rated load capacity<br /> **Where unintentional movement may exist<br /> **Having direct contact with foodstuffs<br /> **In a potentially explosive atmosphere<br /> ==&lt;big&gt;De-Energization&lt;/big&gt;==<br /> 1. Fully lower the BE roller bed or position the roller bed on service stands if service requires the bed be raised. See Figures 1 &amp; 2.<br /> {|<br /> |[[File:WARNING-warn.png|alt=WARNING|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:WARNING-warn.png]]<br /> !Failure to properly support the roller bed when performing service under the BE could result in injury from the roller bed lowering unexpectedly.<br /> |}[[File:IOP-400 BE-SL&amp;DS (10-23) Fully Lower BE Roller Bed.png|alt=Fully lowered BE roller bed|none|thumb|FIGURE 1|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Fully_Lower_BE_Roller_Bed.png]][[File:IOP-400 BE-SL&amp;DS (10-23) BE Roller Bed on Service Stands .png|alt=Raised BE roller bed positioned on service stands|none|thumb|FIGURE 2|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_BE_Roller_Bed_on_Service_Stands_.png]]2. Turn key on dashboard to the “OFF” position. See Figure 3.[[File:IOP-400 BE-SL&amp;DS (10-23) De-Energization Figure 3.png|alt=Key on BE dashboard turned to the “OFF” position.|none|thumb|FIGURE 3|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_De-Energization_Figure_3.png]]3. Disconnect power to the extractor or shut off the electrical branch circuit breaker.<br /> {|<br /> |[[File:Danger Warning.png|alt=DANGER|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Danger_Warning.png]]<br /> |'''Failure to disconnect electrical power to the BE could result in electrical shock. Serious personal injury or death will occur.'''<br /> |}4. Actuate all hydraulic levers in both directions to re-lease any stored hydraulic pressure. See Figure 4.<br /> {|<br /> |[[File:WARNING-warn.png|alt=WARNING|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:WARNING-warn.png]]<br /> |'''Failure to release any stored hydraulic pres-sure could result in injury from:'''<br /> *'''Escaping hydraulic fluid under high pressure (see ''[https://tech.bhs1.com/index.php/(BE-SL_%26_-DS)_Single_Level_%26_Double_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-400)#Operational_Safety HYDRAULIC HAZARDS]'' in the ''[https://tech.bhs1.com/index.php/(BE-SL_%26_-DS)_Single_Level_%26_Double_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-400)#General_Safety GENERAL SAFETY]'' section).'''<br /> *'''Unexpected movement of hydraulic components.'''<br /> |}[[File:IOP-400 BE-SL&amp;DS (10-23) Actuate all Hydraulic Levers in Both Directions.png|alt=Actuate all hydraulic levers in both directions to release any stored hydraulic pressure.|none|thumb|FIGURE 4|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Actuate_all_Hydraulic_Levers_in_Both_Directions.png]]<br /> ==&lt;big&gt;Labels &amp; Placards&lt;/big&gt;==<br /> '''Operators should be familiar with the meaning of the following labels and placards found on the BE to ensure proper and safe operation.'''<br /> {| class=&quot;wikitable&quot;<br /> |-<br /> ![[File:Read Before Operating Notice.png|alt=Read Before Operating|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Read_Before_Operating_Notice.png]]<br /> |'''Read and understand instruction manual prior to use.'''<br /> |-<br /> ![[File:Lockout-Before-Servicing-Notice.png|alt=Lockout Before Servicing Unit|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Lockout-Before-Servicing-Notice.png]]<br /> |'''Lockout before servicing.'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Extractor Arm Positioning Arrows.png|alt=BE-SL &amp; BE-DS Extractor Arm Positioning Arrows|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Extractor_Arm_Positioning_Arrows.png]]<br /> |'''Extractor arm positioning arrows'''<br /> |-<br /> ![[File:Do Not Operate Without Guards or Covers Notice.png|alt=DO NOT Operate Without Guards or Covers Notice|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Do_Not_Operate_Without_Guards_or_Covers_Notice.png]]<br /> |'''DO NOT operate with guards or covers removed'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) No Riders Allowed.png|alt=No riders allowed|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_No_Riders_Allowed.png]]<br /> |'''NO riders allowed.'''<br /> |-<br /> ![[File:No Pacemakers Notice.png|alt=DO NOT operate by or in close proximity to people with pacemakers.|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:No_Pacemakers_Notice.png]]<br /> |'''DO NOT operate by or in close proximity to people with pacemakers.'''<br /> |-<br /> ![[File:Strong Magnet Field Hazard Warning.png|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Strong_Magnet_Field_Hazard_Warning.png]]<br /> [[File:Warning.png|alt=WARNING|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Warning.png]]<br /> |'''Strong Magnet Field Hazard'''<br /> *Attraction between magnet and metallic objects can crush.<br /> *Keep unsecured metallic objects away from magnet.<br /> *De-energize and lockout/tagout before servicing.<br /> |-<br /> ![[File:Chain Entanglement Hazard Warning.png|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Chain_Entanglement_Hazard_Warning.png]]<br /> [[File:Warning.png|alt=WARNING|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Warning.png]]<br /> |'''Chain Entanglement Hazard'''<br /> *Moving chains and sprockets can crush and cut.<br /> *Keep hands and fingers clear. Do not operate with guards removed.<br /> *De-energize and lockout/tagout before servicing.<br /> |-<br /> ![[File:Electrical Hazard Warning.png|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Electrical_Hazard_Warning.png]]<br /> [[File:Danger Warning.png|alt=DANGER|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Danger_Warning.png]]<br /> |'''Electrical Hazard'''<br /> *Energized components can cause electrical shock.<br /> *De-energize and lockout/tagout before servicing.<br /> |-<br /> ![[File:BE-SL and BE-DS Power Off-On.png|alt=BE-SL and BE-DS Power Off-On|frameless|180x180px|link=https://tech.bhs1.com/index.php/File:BE-SL_and_BE-DS_Power_Off-On.png]]<br /> |'''Power Off/On'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Horn Control.png|alt=BE-SL and BE-DS Horn Control |frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Horn_Control.png]]<br /> |'''Horn (If equipped)'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Vacuum Control.png|alt=BE-SL and BE-DS Vacuum Control |frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Vacuum_Control.png]]<br /> |'''Vacuum Off/On (If equipped)'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Magnet Extraction.png|alt=BE-SL and BE-DS Magnet Off/On|frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Magnet_Extraction.png]]<br /> |'''Magnet Off/On (If equipped)'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Powered Roller Cut Off Override.png|alt=BE-SL and BE-DS Powered Roller Cut Off Override|frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Powered_Roller_Cut_Off_Override.png]]<br /> |'''Powered Roller Cutout Override (If equipped)'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Rack-Level-Assist.png|alt=BE-SL and BE-DS Rack Level Assist |frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Rack-Level-Assist.png]]<br /> |'''Rack Level Assist Indicator (If equipped)'''<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> ! rowspan=&quot;3&quot; |[[File:IOP-400_BE-SL&amp;DS_(10-23)_Power_Rollers_and_Arm_Travel.png.png|alt=BE-SL &amp; DS Powered Roller and Arm Travel Controls|frameless|504x504px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Power_Rollers_and_Arm_Travel.png.png]]<br /> |'''Far Power Rollers'''<br /> |-<br /> |'''Arm Travel'''<br /> |-<br /> |'''Near Power Rollers'''<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> |+''BE-SL &amp; DS UNITS ONLY''<br /> ! colspan=&quot;3&quot; |[[File:IOP-400 BE-SL&amp;DS (10-23) BE-SL&amp;DS Units Platform Controls.png|alt=BE-SL &amp; DS Specific Controls|frameless|460x460px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_BE-SL&amp;DS_Units_Platform_Controls.png]]<br /> |-<br /> |Drive Forward/Reverse<br /> |Platform Raise/Lower<br /> |Arm Rotation Near/Far<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> |+''BE-TS &amp; QS UNITS ONLY''<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) BE-TS &amp; BE-QS Platform Raise and Lower Controls.png|alt=BE-TS &amp; BE-QS Platform Raise and Lower Controls|frameless|240x240px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_BE-TS_&amp;_BE-QS_Platform_Raise_and_Lower_Controls.png]]<br /> ! colspan=&quot;2&quot; |[[File:IOP-400 BE-SL&amp;DS (10-23)BE-TS &amp; BE-QS Specific Controls.png|alt=BE-TS &amp; BE-QS Specific-Controls|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)BE-TS_&amp;_BE-QS_Specific_Controls.png]]<br /> |-<br /> |Platform Raise/Lower<br /> |Drive Foward/Reverse<br /> |Arm Rotation Near/Far<br /> |}<br /> =&lt;big&gt;General Information&lt;/big&gt;=<br /> ==&lt;big&gt;Specification Data&lt;/big&gt;==<br /> [[File:BE-TS Specification Data.png|alt=IOP-401 BE-TS (10-23) Specification Data|frameless|600x600px]]<br /> {| class=&quot;wikitable&quot;<br /> | colspan=&quot;2&quot; |<br /> !BE-24-2-TS<br /> !BE-36-2-TS<br /> !BE-42-2-TS<br /> |-<br /> !A<br /> |Overall Length<br /> |156.5&quot;<br /> |180.5&quot;<br /> |192.5&quot;<br /> |-<br /> !B<br /> |Overall Width<br /> |72&quot;<br /> |72&quot;<br /> |72&quot;<br /> |-<br /> !C<br /> |Overall Height (Lowered)<br /> |158.188&quot;<br /> |158.188&quot;<br /> |160.688&quot;<br /> |-<br /> !<br /> |Overall Height (Raised w/ Overhead Guard)<br /> |182.375&quot;<br /> |182.375&quot;<br /> |182.375&quot;<br /> |-<br /> !<br /> |Overall Height (Raised w/ Strobe &amp; Alarm)<br /> |191.75&quot;<br /> |191.75&quot;<br /> |191.75&quot;<br /> |-<br /> !D<br /> |Wheel Base<br /> |98&quot;<br /> |122&quot;<br /> |134&quot;<br /> |-<br /> !E<br /> |Drive Wheel Center line<br /> |51&quot;<br /> |51&quot;<br /> |51&quot;<br /> |-<br /> !F<br /> |Battery Compartment Width<br /> |24&quot;<br /> |36&quot;<br /> |42&quot;<br /> |-<br /> !G<br /> |Ground Clearance<br /> |.625&quot;<br /> |.625&quot;<br /> |.625&quot;<br /> |-<br /> !H<br /> |Minimum Roller Height<br /> |6.5&quot;<br /> |6.5&quot;<br /> |6.5&quot;<br /> |-<br /> !I<br /> |Maximum Roller Height<br /> |96&quot;<br /> |96&quot;<br /> |96&quot;<br /> |-<br /> !J<br /> |Operator Platform Height (Lowered/Raised)<br /> |11&quot; / 103&quot;<br /> |11&quot; / 103&quot;<br /> |11&quot; / 103&quot;<br /> |}<br /> <br /> === UNITS WITH 10 HP POWER UNIT USED PRIOR TO DECEMBER, 2014 ===<br /> {| class=&quot;wikitable&quot;<br /> !<br /> !BE-24-2-TS<br /> !BE-36-2-TS<br /> !BE-42-2-TS<br /> |-<br /> |Travel Speed<br /> |0 to 190 ft/min / 0 to 0.97 m/s<br /> |0 to 190 ft/min / 0 to 0.97 m/s<br /> |0 to 190 ft/min / 0 to 0.97 m/s<br /> |-<br /> |Raise - Lower Speed<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |-<br /> |Powered Roller Speed<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |-<br /> |Arm Traverse Speed<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |-<br /> |Arm Rotation Time<br /> |6 s to 8 s<br /> |6 s to 8 s<br /> |6 s to 8 s<br /> |-<br /> |Draw Bar Pull / Vacuum<br /> <br /> (12&quot; / 305 mm Round Cup)<br /> |1,000 lb / 454 kg<br /> |1,000 lb / 454 kg<br /> |1,000 lb / 454 kg<br /> |-<br /> |Draw Bar Pull Magnet*<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |-<br /> |Vacuum Attach Time<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |-<br /> |Vacuum Release Time<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |-<br /> |Input Voltage<br /> |480 V / 3 ph / 60Hz<br /> |480 V / 3 ph / 60Hz<br /> |480 V / 3 ph / 60Hz<br /> |-<br /> |AC Current Draw<br /> |16.5 A<br /> |16.5 A<br /> |16.5 A<br /> |-<br /> |Control Circuit Voltage<br /> |120 V ac<br /> |120 V ac<br /> |120 V ac<br /> |-<br /> |Hydraulic Power Unit<br /> |10 hp / 7.46 kW<br /> |10 hp / 7.46 kW<br /> |10 hp / 7.46 kW<br /> |-<br /> |Hydraulic Pump<br /> |16 gal/min / 61 L/min<br /> |16 gal/min / 61 L/min<br /> |16 gal/min / 61 L/min<br /> |-<br /> |Power Unit<br /> |Hydraulic, Variable Displacement<br /> |Hydraulic, Variable Displacement<br /> |Hydraulic, Variable Displacement<br /> |-<br /> |Operating Pressure<br /> |1,500 psi / 103 bar<br /> |1,500 psi / 103 bar<br /> |1,500 psi / 103 bar<br /> |-<br /> |Vacuum Pump<br /> |1/3 hp / 0.25 kW<br /> |1/3 hp / 0.25 kW<br /> |1/3 hp / 0.25 kW<br /> |-<br /> |Vacuum<br /> |21&quot; Hg / 711 mbar<br /> |21&quot; Hg / 711 mbar<br /> |21&quot; Hg / 711 mbar<br /> |-<br /> |Full Load Capacity<br /> |10,000 lb / 4535 kg<br /> |10,000 lb / 4535 kg<br /> |10,000 lb / 4535 kg<br /> |-<br /> |Weight (Empty)<br /> |8,000 lb / 3629 kg<br /> |8,300 lb / 3765 kg<br /> |8,600 lb / 3901 kg<br /> |-<br /> |Total Compartment Rollers / Powered<br /> |11/5<br /> |11/5<br /> |11/5<br /> |-<br /> |Guide Track<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |-<br /> |Overall Dimensions (L x W x H)<br /> |156.5&quot; x 72&quot; x 158.188&quot;<br /> <br /> 3975 mm x 1829 mm x 4018 mm<br /> |180.5&quot; x 72&quot; x 158.188&quot;<br /> <br /> 4585 mm x 1829 mm x 4018 mm<br /> |192.5&quot; x 72&quot; x 160.688&quot;<br /> <br /> 4890 mm x 1829 mm x 4081 mm<br /> |-<br /> |Vacuum Arm Reach<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |-<br /> |Vacuum Arm Reach (Hydraulic Extension)<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |-<br /> |Magnet Arm Reach (Hydraulic Extension) Truck Side<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |-<br /> |Wheel Base<br /> |98&quot; / 2489 mm<br /> |122&quot; / 3099 mm<br /> |134&quot; / 3404 mm<br /> |-<br /> |Drive Wheel Center Line<br /> |51&quot; / 1295 mm<br /> |51&quot; / 1295 mm<br /> |51&quot; / 1295 mm<br /> |-<br /> |Battery Compartment Width<br /> |24&quot; / 610 mm<br /> |36&quot; / 915 mm<br /> |42&quot; / 1067 mm<br /> |-<br /> |Maximum Battery Dimensions<br /> <br /> (L x W x H)<br /> |48&quot; x 23&quot; x 34&quot;<br /> <br /> 1219 mm x 584 mm x 864 mm<br /> |48&quot; x 35&quot; x 34&quot;<br /> <br /> 1219 mm x 889 mm x 864 mm<br /> |48&quot; x 41&quot; x 34&quot;<br /> <br /> 1219 mm x 1041 mm x 864 mm<br /> |-<br /> |Minimum Battery Width<br /> <br /> (with vacuum / magnet)<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |-<br /> |Minimum Battery Height<br /> |17.75&quot; / 451 mm<br /> |17.75&quot; / 451 mm<br /> |17.75&quot; / 451 mm<br /> |-<br /> |Ground Clearance<br /> |0.63&quot; / 16 mm<br /> |0.63&quot; / 16 mm<br /> |0.63&quot; / 16 mm<br /> |-<br /> |Roller Height<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |-<br /> ! colspan=&quot;4&quot; |NOTES<br /> |-<br /> | colspan=&quot;4&quot; |''Specifications may vary ± 5% because of temperature, floor considerations, and operator efficiency. Values represented under normal operating conditions.''<br /> |-<br /> | colspan=&quot;4&quot; |''* Varies with battery case thickness and condition.''<br /> |}<br /> <br /> === UNITS WITH 20 HP POWER UNIT USED DECEMBER, 2014 TO PRESENT ===<br /> {| class=&quot;wikitable&quot;<br /> !<br /> !BE-24-2-TS<br /> !BE-36-2-TS<br /> !BE-42-2-TS<br /> |-<br /> |Travel Speed<br /> |0 to 240 ft/min / 0 to 1.22 m/s<br /> |0 to 240 ft/min / 0 to 1.22 m/s<br /> |0 to 240 ft/min / 0 to 1.22 m/s<br /> |-<br /> |Raise - Lower Speed<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |-<br /> |Powered Roller Speed<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |-<br /> |Arm Traverse Speed<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |-<br /> |Arm Rotation Time<br /> |6 s to 8 s<br /> |6 s to 8 s<br /> |6 s to 8 s<br /> |-<br /> |Draw Bar Pull / Vacuum<br /> <br /> (12&quot; / 305 mm Round Cup)<br /> |1,000 lb / 454 kg<br /> |1,000 lb / 454 kg<br /> |1,000 lb / 454 kg<br /> |-<br /> |Draw Bar Pull Magnet*<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |-<br /> |Vacuum Attach Time<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |-<br /> |Vacuum Release Time<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |-<br /> |Input Voltage<br /> |480 V / 3 ph / 60Hz<br /> |480 V / 3 ph / 60Hz<br /> |480 V / 3 ph / 60Hz<br /> |-<br /> |AC Current Draw<br /> |35 A<br /> |35 A<br /> |35 A<br /> |-<br /> |AC Current Draw w/ Electric Drive Option<br /> |42 A<br /> |42 A<br /> |42 A<br /> |-<br /> |Control Circuit Voltage<br /> |120 V ac<br /> |120 V ac<br /> |120 V ac<br /> |-<br /> |Hydraulic Power Unit<br /> |20 hp / 14.9 kW<br /> |20 hp / 14.9 kW<br /> |20 hp / 14.9 kW<br /> |-<br /> |Hydraulic Power Unit w/ Electric Drive Option<br /> |25 hp / 18.7 kW<br /> |25 hp / 18.7 kW<br /> |25 hp / 18.7 kW<br /> |-<br /> |Hydraulic Pump<br /> |22 gal/min / 83 L/min<br /> |22 gal/min / 83 L/min<br /> |22 gal/min / 83 L/min<br /> |-<br /> |Power Unit<br /> |Hydraulic, Variable Displacement<br /> |Hydraulic, Variable Displacement<br /> |Hydraulic, Variable Displacement<br /> |-<br /> |Operating Pressure<br /> |1,500 psi / 103 bar<br /> |1,500 psi / 103 bar<br /> |1,500 psi / 103 bar<br /> |-<br /> |Vacuum Pump<br /> |1/3 hp / 0.25 kW<br /> |1/3 hp / 0.25 kW<br /> |1/3 hp / 0.25 kW<br /> |-<br /> |Vacuum<br /> |21&quot; Hg / 711 mbar<br /> |21&quot; Hg / 711 mbar<br /> |21&quot; Hg / 711 mbar<br /> |-<br /> |Full Load Capacity<br /> |10,000 lb / 4535 kg<br /> |10,000 lb / 4535 kg<br /> |10,000 lb / 4535 kg<br /> |-<br /> |Weight (Empty)<br /> |8,000 lb / 3629 kg<br /> |8,300 lb / 3765 kg<br /> |8,600 lb / 3901 kg<br /> |-<br /> |Total Compartment Rollers / Powered<br /> |11/5<br /> |11/5<br /> |11/5<br /> |-<br /> |Guide Track<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |-<br /> |Overall Dimensions (L x W x H)<br /> |156.5&quot; x 72&quot; x 158.188&quot;<br /> <br /> 3975 mm x 1829 mm x 4018 mm<br /> |180.5&quot; x 72&quot; x 158.188&quot;<br /> <br /> 4585 mm x 1829 mm x 4018 mm<br /> |192.5&quot; x 72&quot; x 160.688&quot;<br /> <br /> 4890 mm x 1829 mm x 4081 mm<br /> |-<br /> |Vacuum Arm Reach<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |-<br /> |Vacuum Arm Reach (Hydraulic Extension)<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |-<br /> |Magnet Arm Reach (Hydraulic Extension) Truck Side<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |-<br /> |Wheel Base<br /> |98&quot; / 2489 mm<br /> |122&quot; / 3099 mm<br /> |134&quot; / 3404 mm<br /> |-<br /> |Drive Wheel Center Line<br /> |51&quot; / 1295 mm<br /> |51&quot; / 1295 mm<br /> |51&quot; / 1295 mm<br /> |-<br /> |Battery Compartment Width<br /> |24&quot; / 610 mm<br /> |36&quot; / 915 mm<br /> |42&quot; / 1067 mm<br /> |-<br /> |Maximum Battery Dimensions<br /> <br /> (L x W x H)<br /> |48&quot; x 23&quot; x 34&quot;<br /> <br /> 1219 mm x 584 mm x 864 mm<br /> |48&quot; x 35&quot; x 34&quot;<br /> <br /> 1219 mm x 889 mm x 864 mm<br /> |48&quot; x 41&quot; x 34&quot;<br /> <br /> 1219 mm x 1041 mm x 864 mm<br /> |-<br /> |Minimum Battery Width<br /> <br /> (with vacuum / magnet)<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |-<br /> |Minimum Battery Height<br /> |17.75&quot; / 451 mm<br /> |17.75&quot; / 451 mm<br /> |17.75&quot; / 451 mm<br /> |-<br /> |Ground Clearance<br /> |0.63&quot; / 16 mm<br /> |0.63&quot; / 16 mm<br /> |0.63&quot; / 16 mm<br /> |-<br /> |Roller Height<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |-<br /> ! colspan=&quot;4&quot; |NOTES<br /> |-<br /> | colspan=&quot;4&quot; |''Specifications may vary ± 5% because of temperature, floor considerations, and operator efficiency. Values represented under normal operating conditions.''<br /> |-<br /> | colspan=&quot;4&quot; |''* Varies with battery case thickness and condition.''<br /> |}<br /> ==&lt;big&gt;Pre-Installation Check&lt;/big&gt;==<br /> ===&lt;big&gt;&lt;u&gt;Floor Conditions&lt;/u&gt;&lt;/big&gt;===<br /> The floor is the single most critical area of the battery room.  A bad floor can cause significant issues with the installation as well as downtime and maintenance problems with the extractor.  The floor should be verified as to its minimum thickness and strength with user.  As noted on the drawing, the specific requirement of flatness for your particular type of system is listed. Below is a chart stating floor requirements.  If possible, especially on double stack and higher systems, a digital level should be used to shoot the grade for compliance with the specification.  The floor should also be inspected for severe cracks or excessively wide expansion joints in the travel path of the machine.  If floor drains are present, they must not have a grade to the opening that encroaches into the travel path. <br /> <br /> F-min is a rating method used to evaluate the flatness and levelness of a floor designated as &quot;defined travel path&quot;.  For example, an F-min rating of 60 means that there is no more than .129&quot; of variation in the transverse axis (wheels left to right) and .287&quot; variation in the longitudinal axis (front to back) on the equipment.<br /> <br /> To avoid potential damage to drive wheel assemblies, guide track, structural components, guide rollers  and issues with the inner frame equalization the &quot;defined travel path&quot; of the Battery Extractor should meet or exceed the recommended F-min specification. See chart below for the model specifications.<br /> {| class=&quot;wikitable&quot;<br /> !Model<br /> !F-Min<br /> !+/- Longitudinal<br /> !+/- Transverse<br /> !Slope Defect<br /> |-<br /> |SL, DS<br /> |40<br /> |.287&quot;<br /> |.192&quot;<br /> |.096&quot;<br /> |-<br /> |TS<br /> |60<br /> |.186&quot;<br /> |.129&quot;<br /> |.066&quot;<br /> |-<br /> |QS<br /> |85<br /> |.131&quot;<br /> |.091&quot;<br /> |.047&quot;<br /> |}[[File:IOP-400 BE-SL&amp;DS (10-23) Floor Conditions Pre-Installation Check.png|alt=BE-TS Floor Conditions Pre-Installation Check|frameless|500x500px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Floor_Conditions_Pre-Installation_Check.png]]<br /> ==&lt;big&gt;Operating Controls &amp; Instructions&lt;/big&gt;==<br /> <br /> === &lt;big&gt;&lt;u&gt;Operator Console&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Operator Console.png|alt=BE-TS Operator Console|frameless|1080x1080px]]<br /> <br /> '''''NOTE:''' Safety devices for the machine and the machine operating area SHALL NOT be rendered inoperable or misused.'' <br /> <br /> ''Typical BE-TS operator console shown above. Position of optional controls may vary from that shown depending on age of unit and/or combination of optional controls present.''<br /> <br /> ''HMI display standard on units shipped after February, 2020 for Industrial Internet of Things (IIoT) package.''<br /> <br /> ==== &lt;u&gt;&lt;big&gt;Safety Features&lt;/big&gt;&lt;/u&gt; ====<br /> &lt;u&gt;Key Switch&lt;/u&gt; – Located on the dash (see above).  Primary on/off switch to prevent unauthorized personnel from operating the BE.<br /> <br /> &lt;u&gt;Emergency Stop&lt;/u&gt; – Located on the dash (see above). Will stop all functions immediately, locking all hydraulics in place. To use, press down on the red button. The machine key must be used to reset the emergency stop.<br /> <br /> &lt;u&gt;Foot Switch&lt;/u&gt; – Must be depressed to operate the BE.  Stepping off the foot switch will stop all functions immediately, locking all hydraulics in place.  To resume use, depress the foot switch.<br /> <br /> &lt;u&gt;Gate Switch&lt;/u&gt; – The gate must be fully closed for the BE to operate.<br /> <br /> &lt;u&gt;Extractor Arm Switch&lt;/u&gt; – Does not permit the machine to move forward or backward unless the extractor arm is located in the center of the carriage between the indicating arrows located on the arm guard.<br /> <br /> &lt;u&gt;Powered Roller Cutout (PRC-1 or PRC-2) ''(if equipped)''&lt;/u&gt; – Disengages the powered roller function when the photo eye positioned on the edge of the BE battery compartment is disrupted by a battery, requiring additional input from the operator. Pressing the &quot;Power Roller Cutout&quot; override button (see above) on the dash will resume  powered roller operation when loading or unloading batteries from the BE carriage.<br /> <br /> &lt;u&gt;Horn ''(If equipped)''&lt;/u&gt; – Button located on the dash (see above).  Used to alert personnel before moving the BE.<br /> <br /> &lt;u&gt;Strobe Light ''(If equipped)''&lt;/u&gt; – Located on a vertical stanchion mounted to the right rear of the operator compartment. For units equipped with optional overhead guard (OHG), the beacon is located above of the operator compartment.  Beacon automatically flashes when the BE is switched on to visually notify the BE is in use.<br /> <br /> &lt;u&gt;Audible Alarm ''(if equipped)''&lt;/u&gt; – Mounted in the same location as the Strobe Light.  Automatically sounds when the BE is switched on to notify personnel that the BE is in use.<br /> <br /> &lt;u&gt;Blue Light ''(if equipped)''&lt;/u&gt; - Mounted at an elevated position on either end of the extractor which project a bright, highly concentrated blue beam pattern on the ground visually alerting personnel to the direction the extractor is moving.<br /> <br /> === &lt;big&gt;&lt;u&gt;Operation Overview&lt;/u&gt;&lt;/big&gt; ===<br /> <br /> * All operators should be familiar with the operator console of the extractor before performing any battery changes.  The controls of the console are simple and well marked.  It consists of six, manually operated, hydraulic control valves and a three position selector switch which controls the left and right vacuum cups (or optional magnets).<br /> * The operator shall make certain there are no persons or obstacles in the extractor path prior to traveling forward or reverse.<br /> * All manual valves are moved in the direction of the function travel which it controls with exception of the lift/lower valve, which is pulled toward the operator for &quot;up&quot; and pushed away for &quot;down.&quot;<br /> * In the event of any failure or malfunction, step off the dead-man switch or press the E-stop button and all functions will stop immediately, locking all hydraulics in place.<br /> * The extractor arm must be in the center of the carriage or the unit will not travel forward or reverse.<br /> * To ensure smooth operation, all valve movements should be made in a slow, deliberate motion.<br /> * Only one key should be provided to operate the extractor.<br /> * When leaving the machine, the operator shall turn off the key switch, remove the key and logout out of the IIoT (if equipped) to prevent unauthorized use<br /> * Ensure all the batteries and cables are properly stored in the battery stands prior to moving the BE.<br /> * The BE is designed to carry only one battery in each compartment on the carriage.<br /> * When loading the BE, position the batteries in the center of the compartments on the powered rollers to prevent any battery movement when transporting.<br /> * Ensure there are no projections outside of the carriage before moving the BE.<br /> <br /> === &lt;u&gt;&lt;big&gt;Operating Instructions&lt;/big&gt;&lt;/u&gt; ===<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Pre-Change Out Preparation&lt;/u&gt;&lt;/big&gt; ====<br /> 1. Position lift truck for change out in designated area.<br /> <br /> 2. Remove all battery restraints and disconnect battery cables following manufacturers guidelines.  (Be sure to position battery cables so as not to be damaged by the battery during change out.)<br /> <br /> 3. Board battery extractor and close safety gate.  (Gate must be fully closed or unit will not operate.)<br /> <br /> 4. Turn key switch to &quot;ON&quot; position. <br /> <br /> 5. Log in on the HMI display (if equipped with BE-IIoT package).<br /> <br /> 6. Depress foot pedal.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Discharged Battery Removal&lt;/u&gt;&lt;/big&gt; ====<br /> 1. Move extractor forward or reverse to position center of empty compartment with center of lift truck battery compartment. (Lead roller of extractor is equipped with a centering groove.  Users may find it beneficial to mark center of lift truck compartment to aid in alignment.)<br /> <br /> 2. Align extractor's roller compartment height with lift truck's battery compartment.<br /> <br /> 3. Rotate extractor arm into battery compartment aligned in Step 2.<br /> <br /> 4. Move extractor arm toward battery until vacuum cup/magnet contacts battery.<br /> <br /> [[File:NOTICE-warn.png|alt=NOTICE|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:NOTICE-warn.png]] '''DO NOT force cup/magnet into battery after initial contact with battery is made.'''<br /> <br /> 5. Energize vacuum/magnet by turning selector switch to proper direction, left or right.<br /> <br /> 6. Move extractor arm away from lift truck toward center of extractor roller bed, removing discharged battery.  (Battery should be pulled past first three idler rollers onto first or second powered roller.)<br /> <br /> 7. Turn off vacuum/magnet and move extractor arm away from battery 1&quot; to 2&quot;.<br /> <br /> 8. Rotate extractor arm out of battery compartment into opposite compartment (if empty) and center arm in carriage.<br /> <br /> 9. Move battery into center of compartment using powered rollers.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Charged Battery Retrieval&lt;/u&gt;&lt;/big&gt; ====<br /> 1. Locate charged battery for appropriate type of lift truck being changed.<br /> <br /> 2. Raise battery extractor roller compartment to proper level to gain access as needed to disconnect desired battery from its charger and disengage battery safety stop.<br /> <br /> [[File:WARNING-warn.png|alt=WARNING|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:WARNING-warn.png]] '''ALWAYS be sure charging has been completed and charger is not still charging battery. Dangerous sparking/arcing can occur if battery is unplugged from charger while charging.'''<br /> <br /> 3. Move extractor to appropriate rack position and align empty roller compartment with the center of the battery storage rack compartment.  ''(The battery safety stop of each compartment is the center of that compartment and should be used for alignment with the groove in the lead roller of the battery extractor compartment.'') <br /> <br /> 4. Rotate arm into empty compartment (if not already positioned there.)<br /> <br /> 5. Move extractor arm toward battery until vacuum cup/magnet contacts battery.<br /> <br /> 6. Energize vacuum cup/magnet by turning selector switch to proper direction, left or right.<br /> <br /> [[File:NOTICE-warn.png|alt=NOTICE|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:NOTICE-warn.png]] '''DO NOT force cup/magnet into battery after initial contact with battery is made.'''<br /> <br /> 7. Move extractor arm away from battery rack toward center of extractor roller bed, removing charged battery.  (Battery should be pulled past first three idler rollers onto first or second powered roller.)<br /> <br /> 8. Turn off vacuum/magnet and move extractor arm away from battery 1&quot; to 2&quot;.<br /> <br /> 9. Rotate extractor arm out of battery compartment into fully vertical position.<br /> <br /> 10. Move battery into center of compartment using powered rollers.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Discharged Battery Return&lt;/u&gt;&lt;/big&gt; ====<br /> 1. If required, adjust extractor compartment height to battery rack level with open battery compartment.  Drive extractor to align roller compartment containing discharged battery with open battery compartment.<br /> <br /> 2. Return discharged battery to battery rack using powered rollers.<br /> <br /> '''''NOTE:''''' ''In most instances, batteries can be deposited into battery racks in one motion using only powered rollers.  When this does not work, the battery may need slight assistance from extractor arm.  To do this, rotate arm into compartment such as one would if removing battery from rack.  If extractor is vacuum equipped, position top edge of cup slightly higher than edge of battery (or over lifting eye if so equipped) to prevent cup from adhering to battery - No vacuum/magnet is necessary for pushing. DO NOT activate vacuum/magnet switch.  Slowly push battery into rack until fully into compartment.''<br /> <br /> 3. Engage battery safety stop and connect battery to charger as required.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Charged Battery Installation&lt;/u&gt;&lt;/big&gt; ====<br /> 1. Lower extractor to fully lowered position.<br /> <br /> 2. Drive extractor back to lift truck and align roller compartment containing charged battery as performed in steps 1 and 2 of &quot;Discharged Battery Removal&quot;.<br /> <br /> 3. Move charged battery toward lift truck compartment by using powered rollers, verifying precise battery alignment.<br /> <br /> [[File:NOTICE-warn.png|alt=NOTICE|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:NOTICE-warn.png]] '''Many batteries are a tight fit into lift truck battery compartments. Care MUST be taken to ensure alignment is precise to avoid damage to battery, lift truck, and/or battery extractor.'''<br /> <br /> 4. Adjust extractor vertically as well as horizontally, if needed<br /> <br /> 5. Insert battery into lift truck as far as possible using only the powered rollers.<br /> <br /> 6. Rotate extractor arm into compartment and SLOWLY push battery into lift truck.  (Be sure to watch battery cables for interference.)<br /> <br /> 7. Return extractor arm to center of roller bed and lower extractor to fully lowered position.  Drive extractor out of immediate area.<br /> <br /> 8. Turn off key switch, remove key from switch, log out on the HMI display (if equipped with BE-IIoT package) and carefully exit extractor.<br /> <br /> 9. Secure newly installed battery in lift truck and reconnect battery cables.<br /> <br /> 10. Return lift truck to service<br /> {|<br /> ![[File:Caution-Warning.png|alt=CAUTION|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:Caution-Warning.png]]<br /> |'''DO NOT drive the BE into the travel path end stops. The end stops are designed to prevent the BE from accidentally traveling beyond its designated travel path. Driving the BE into the end stops will cause the BE to stop suddenly, possibly causing damage to the end stop, the BE and/or personal injury.'''<br /> |}<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Optional Powered Roller Cutout Operation&lt;/u&gt;&lt;/big&gt; ====<br /> Units equipped with optional Powered Roller Cutout, the powered roller override button must be depressed in addition to actuating the hydraulic valve when a battery disrupts the photo eye(s) at the edge of the battery compartments while using the powered rollers to transfer batteries on and off of the battery extractor.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;IIoT Equipped Units&lt;/u&gt;&lt;/big&gt; ====<br /> Units shipped after February, 2020 are equipped with BE-IIoT (Industrial Internet of Things) package. Operators must log in to the BE-IIoT system using the HMI (Human Machine Interface) display located on the dashboard to operate the extractor.<br /> <br /> When finished operating the extractor, the operator should log out of the BE-IIoT to prevent unauthorized access and/or operation of the extractor.<br /> <br /> == &lt;big&gt;Manual Unloading&lt;/big&gt; ==<br /> '''Lockout/tagout and de-energize all equipment prior to manually unloading any battery.'''<br /> <br /> In the event of power loss or an operational malfunction of the BE not allowing a battery to be unloaded using normal operating procedures, it is recommended a battery be removed from the BE using certified and approved vertical extraction methods and devices.<br /> {|<br /> |[[File:DANGER-warn.png|alt=DANGER|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:DANGER-warn.png]]<br /> |'''Read, understand and observe all safety warnings and procedures related to the vertical extraction device(s) being used.'''<br /> |}<br /> Should the status of the BE not allow for safe vertical extraction (due to position in the battery aisle or level of the inner carriage), only repairs required to safely maneuver the BE to a position allowing for safe vertical extraction should be made.  Once any batteries are safely unloaded, any remaining repairs can be made.<br /> {|<br /> |[[File:DANGER-warn.png|alt=DANGER|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:DANGER-warn.png]]<br /> |'''Extreme care should be taken when working under or around equipment supporting elevated loads. Unexpected movement of the equipment could cause the load and/or equipment to fall. ALWAYS be sure devices of adequate size and strength are in place to prevent any personnel working under the elevated load from being crushed. Serious personal injury or death will occur.'''<br /> |}<br /> <br /> == &lt;big&gt;Spare Parts List&lt;/big&gt; ==<br /> Use only BHS approved replacement parts.<br /> <br /> Refer to the appropriate Spare Parts Kit (vacuum equipped units - Pt# BE-SPKV-TS, magnet equipped units - Pt# BE-SPKM-TS) for the list of items recommended by BHS to have on hand for BE-TS models to minimize any downtime due to minor breakdowns that may occur under normal operating conditions.<br /> <br /> BHS offers many replacement parts kits containing relevant or related parts when replacing certain individual parts or replacing any obsolete / upgraded parts.<br /> <br /> BHS also offers a supplement hose kit (Pt# 80342003) which contains an assortment of hoses allowing any hose on the extractor to be replaced immediately with a temporary hose of equal length or longer. After the extractor is back up and running, the failed hose can be taken to have an exact replacement made. Once the new hose is made and installed, the temporary hose can be returned to the kit for future use.<br /> <br /> Go to [[www.bhs1.com]] and click &quot;Parts&quot; for all the latest parts kits and corresponding installation instructions (if applicable).<br /> <br /> BHS recommends that a full maintenance inspection report similar to the one provided be done at least once a month.<br /> <br /> Any parts found to be excessively worn or damaged should promptly be replaced unless said parts pose a safety risk to the operator and/or extractor, in which case the unit should be removed from service until the problem(s) are remedied (See<br /> <br /> Operator's Daily Checklist.)<br /> <br /> ''Note: Spare parts kits contain parts for the most current machine design/configuration. Due to continuous design and manufacturing updates and improvements, not all the parts in the spare parts kits may be compatible with older units. Consult factory when ordering spare or replacement parts for existing units in the field to ensure part compatibility.''<br /> <br /> = &lt;big&gt;Parts Sections&lt;/big&gt; =<br /> <br /> == &lt;big&gt;Chassis&lt;/big&gt; ==<br /> <br /> === &lt;big&gt;&lt;u&gt;Equalization Components&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Equalization Components.png|alt=BE-TS Chassis Equalization|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PT0222-1<br /> |LINK-CONNECTING-#60<br /> |<br /> |<br /> |8<br /> |-<br /> |2<br /> |HW0017<br /> |NUT-HEX-3/4-10<br /> |<br /> |<br /> |8<br /> |-<br /> |3<br /> |HW0115<br /> |WASHER-LOCK-3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |43097001<br /> |STUD-ANCHOR-5&quot;<br /> |<br /> |''Upper''<br /> |4<br /> |-<br /> |5<br /> |HW0020<br /> |NUT-JAM-3/4-10<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43097002<br /> |STUD-ANCHOR-2&quot;<br /> |<br /> |''Lower''<br /> |4<br /> |-<br /> |7<br /> |00158001-14<br /> |CHAIN-ROLLER-#60<br /> |<br /> |<br /> |4<br /> |}<br /> [[File:BE-TS Equalization Components - 1.0.2.png|alt=BE-TS Chassis Equalization 2|frameless|575x575px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PT0416<br /> |COLLAR-SHAFT-1 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |2<br /> |43097006<br /> |KEY-3/8&quot; X 2 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |PT0224<br /> |SPROCKET-60B12 X 1 1/2&quot;<br /> |<br /> |''Keyed in line''<br /> |8<br /> |-<br /> |4<br /> |PT0405<br /> |FLANGE BEARING-2 BOLT-1 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1 1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |6<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> | rowspan=&quot;4&quot; |7<br /> |43127001<br /> |SHAFT-EQUALIZATION-81.75&quot;<br /> |<br /> |''BE-24-2-TS''<br /> |2<br /> |-<br /> |43327001<br /> |SHAFT-EQUALIZATION-105.75&quot;<br /> |<br /> |''BE-36-2-TS''<br /> |2<br /> |-<br /> |44327001<br /> |SHAFT-EQUALIZATION-117.75&quot;<br /> |<br /> |''BE-42-2-TS''<br /> |2<br /> |-<br /> |44527001<br /> |SHAFT-EQUALIZATION-75.75&quot;<br /> |<br /> |''BE-42-1-TS''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |8<br /> |PT0503<br /> |BEARING-FLANGED LOAD-2 1/4&quot;<br /> |<br /> |''Used after December 2003''<br /> |8<br /> |-<br /> |43026001<br /> |BEARING-FLANGED LOAD-2 1/4&quot; ''(MACHINED)''<br /> |<br /> |''Used prior to December 2003''<br /> |8<br /> |-<br /> |9<br /> |HW0025<br /> |NUT-JAM-7/8-14<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0117<br /> |WASHER-LOCK-7/8&quot; ''(NOT SHOWN)''<br /> |<br /> |''Used prior to August 2002''<br /> |8<br /> |}<br /> <br /> === &lt;u&gt;'''&lt;big&gt;Bridge &amp; Cross Bar&lt;/big&gt;'''&lt;/u&gt; ===<br /> [[File:BE-TS Bridge and Cross Bar.png|alt=BE-TS Bridge and Cross Bar|frameless|524x524px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1 1/4&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |2<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |20<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |20<br /> |-<br /> |4<br /> |HW0515<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |''Fully Threaded''<br /> |8<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> === &lt;u&gt;'''&lt;big&gt;Lift Cylinder Connections&lt;/big&gt;'''&lt;/u&gt; ===<br /> [[File:BE-TS Lift Cylinder Connections.png|alt=BE-TS Lift Cylinder Connections|frameless|589x589px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |00158001-13<br /> |CHAIN-ROLLER-#80<br /> |<br /> |<br /> |4<br /> |-<br /> |2<br /> |HW0014<br /> |NUT-HEX-1-8<br /> |<br /> |<br /> |8<br /> |-<br /> |3<br /> |43897002<br /> |STUD-LIFT-INNER FRAME<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |PT0204<br /> |LINK-CONNECTING-#80<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |43897001<br /> |STUD-LIFT-OUTER FRAME<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43815018<br /> |BRACKET-CYLINDER SUPPORT<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |SS0761<br /> |U-BOLT-CYLINDER MOUNTING<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |12<br /> |-<br /> |9<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |10<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |8<br /> |-<br /> | rowspan=&quot;2&quot; |11<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |<br /> |''Idler caster end of unit'' <br /> |2<br /> |-<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |''Drive wheel end of unit'' <br /> |2<br /> |-<br /> |12<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |14<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |43822002<br /> |CLEVIS ASSEMBLY<br /> |<br /> |''Sold as assembly only''<br /> |4<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Guidance Arm&lt;/big&gt;&lt;/u&gt;''' ===<br /> [[File:BE-TS Guidance Arm.png|alt=BE-TS Guidance Arm|frameless|562x562px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> ! colspan=&quot;2&quot; |NO. REQ<br /> |-<br /> |1<br /> |43015011<br /> |GUIDE ARM WELDMENT, 2 ROLLER<br /> |<br /> |<br /> |2<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |2<br /> |43017025<br /> |SPACER-GUIDE ARM<br /> |<br /> |''† 1/2&quot; thick''<br /> |4<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |3<br /> |41215204<br /> |GUIDE ARM WELDMENT, 4 ROLLER<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |2<br /> |-<br /> |4<br /> |41217274<br /> |SPACER-GUIDE ARM<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |4<br /> |-<br /> |5<br /> |43012007<br /> |CAM ROLLER-1 3/4&quot;<br /> |<br /> |<br /> |4<br /> |8<br /> |-<br /> |6<br /> |HW0115<br /> |WASHER-LOCK-3/4&quot;<br /> |<br /> |<br /> |4<br /> |8<br /> |-<br /> |7<br /> |HW0011<br /> |NUT-HEX-3/4-16<br /> |<br /> |<br /> |4<br /> |8<br /> |-<br /> |8<br /> |HW0509<br /> |BOLT-HHCS-1/2-13 X 4-1/2&quot;<br /> |<br /> |<br /> |4<br /> |6<br /> |-<br /> |9<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |6<br /> |-<br /> |10<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |4<br /> |6<br /> |-<br /> |11<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |4<br /> |6<br /> |-<br /> |12<br /> |41215234<br /> |GUIDE ARM WELDMENT (POLY)<br /> |<br /> |<br /> |2<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |13<br /> |41217317<br /> |POLY SLIDE MOUNTING BLOCK<br /> |<br /> |<br /> |4<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |14<br /> |41217318<br /> |POLY SLIDE<br /> |<br /> |<br /> |4<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |15<br /> |HW0501<br /> |BOLT-HHCS-1/2-13 X 1&quot;<br /> |<br /> |<br /> |12<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |16<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |12<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |17<br /> |91253A546<br /> |BOLT FHSCS-1/4-20 X 1-1/2&quot;<br /> |<br /> |<br /> |8<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |18<br /> |HW0003<br /> |NUT-NILN-1/4-20<br /> |<br /> |<br /> |8<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> ! colspan=&quot;7&quot; |NOTES<br /> |-<br /> | colspan=&quot;7&quot; |''† Older units equipped with (1) 1&quot; thick spacer per guide arm bracket.'' <br /> |-<br /> | colspan=&quot;7&quot; |''†† Multiple styles of guide arms have been utilized on extractors. Refer to the parts diagrams for correct replacement parts.'' <br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Roller Bed Componenets&lt;/big&gt;&lt;/u&gt;''' ===<br /> ==== '''&lt;big&gt;''Idler Rollers''&lt;/big&gt;''' ====<br /> [[File:BE-TS Idler Rollers.png|alt=BE-TS Idler Rollers|frameless|746x746px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;3&quot; |1<br /> |43182001<br /> |LEAD ROLLER ASSEMBLY-24&quot;<br /> |<br /> |''With alignment groove''<br /> |4<br /> |-<br /> |43382001<br /> |LEAD ROLLER ASSEMBLY-36&quot;<br /> |<br /> |''With alignment groove''<br /> |4<br /> |-<br /> |43482001<br /> |LEAD ROLLER ASSEMBLY-42&quot;<br /> |<br /> |''With alignment groove''<br /> |4<br /> |-<br /> | rowspan=&quot;3&quot; |2<br /> |43182002<br /> |IDLER ROLLER ASSEMBLY-24&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |43382002<br /> |IDLER ROLLER ASSEMBLY-36&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |43482002<br /> |IDLER ROLLER ASSEMBLY-42&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> | rowspan=&quot;3&quot; |3<br /> |43187002<br /> |SHAFT-HEX-.75&quot; X 25.75&quot;<br /> |<br /> |''24&quot; compartments''<br /> |8<br /> |-<br /> |43387002<br /> |SHAFT-HEX-.75&quot; X 37.75&quot;<br /> |<br /> |''36&quot; compartments''<br /> |8<br /> |-<br /> |43487002<br /> |SHAFT-HEX-.75&quot; X 43.75&quot;<br /> |<br /> |''42&quot; compartments''<br /> |8<br /> |-<br /> | rowspan=&quot;3&quot; |4<br /> |43187003<br /> |SHAFT-HEX-.75&quot; X 27.5&quot;<br /> |<br /> |''24&quot; compartments''<br /> |4<br /> |-<br /> |43387003<br /> |SHAFT-HEX-.75&quot; X 39.5&quot;<br /> |<br /> |''36&quot; compartments''<br /> |4<br /> |-<br /> |43487003<br /> |SHAFT-HEX-.75&quot; X 45.5&quot;<br /> |<br /> |''42&quot; compartments''<br /> |4<br /> |-<br /> |5<br /> |HW1058<br /> |PIN-HITCH<br /> |<br /> |<br /> |24<br /> |}<br /> '''&lt;big&gt;''Powered Rollers''&lt;/big&gt;'''<br /> <br /> [[File:BE-TS Powered Rollers.png|alt=BE-TS Powered Rollers|frameless|546x546px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;3&quot; |1<br /> |43182003<br /> |POWERED ROLLER-24&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |43382003<br /> |POWERED ROLLER-36&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |43485003<br /> |POWERED ROLLER-42&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |2<br /> |43087001<br /> |JOURNAL-POWERED ROLLER<br /> |<br /> |<br /> |10<br /> |-<br /> |3<br /> |PT0404<br /> |FLANGE BEARING-3-BOLT-1&quot;<br /> |<br /> |<br /> |20<br /> |-<br /> |4<br /> |HW0321<br /> |BOLT-HHCS-5/16-18 X 1 1/4&quot;<br /> |<br /> |<br /> |60<br /> |-<br /> |5<br /> |HW0105<br /> |WASHER-LOCK-5/16&quot;<br /> |<br /> |<br /> |60<br /> |-<br /> |6<br /> |HW0004<br /> |NUT-HEX-5/16-18<br /> |<br /> |<br /> |60<br /> |-<br /> |7<br /> |PT0033<br /> |SPROCKET-35B18 X 1&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |8<br /> |00197028<br /> |KEY-1/4&quot; X 1 1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |00158001-16<br /> |CHAIN-ROLLER-#35<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |PT0031<br /> |LINK-CONNECTING-#35<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |PT0418<br /> |COLLAR-SHAFT-1&quot;<br /> |<br /> |<br /> |10<br /> |}<br /> [[File:BE-TS Powered Rollers Detail A.png|alt=BE-TS Powered Rollers Detail A|frameless|542x542px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0120<br /> |MOTOR-HYDRAULIC-160CC<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW1071<br /> |KEY-WOODRUFF-#808 STD<br /> |<br /> |''Supplied with Item 1''<br /> |A/R<br /> |-<br /> |3<br /> |H1544<br /> |ADAPTER-#6 JICM X #10 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |18<br /> |-<br /> |5<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |18<br /> |-<br /> |6<br /> |43017004<br /> |PLATE-MOTOR MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |PT0302-1<br /> |COUPLING BODY-#40 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |PT0301<br /> |CHAIN-COUPLING-#40<br /> |<br /> |''Includes connecting pin''<br /> |2<br /> |-<br /> |9<br /> |00197026<br /> |KEY-1/4&quot; X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43097003<br /> |KEY-1/4&quot; X 5/8&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Hose Carrier&lt;/big&gt;&lt;/u&gt;''' ===<br /> [[File:BE-TS Hose Carrier.png|alt=BE-TS Hose Carrier|frameless|550x550px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PT0629<br /> |CARRIER TRACK<br /> |<br /> |''81 links required''<br /> |10'<br /> |-<br /> |2<br /> |PT0631<br /> |BRACKET-UPPER MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0212<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0032<br /> |NUT-NILN-#10-24<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |PT0630<br /> |BRACKET-LOWER MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |7<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |43817056-2<br /> |BRACKET-CARRIER TRACK MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |HW0401<br /> |BOLT-HHCS-3/8-16 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |14<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |43817057<br /> |PLATE-CARRIER TRACK SUPPORT<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === &lt;big&gt;'''&lt;u&gt;Cable Retractor&lt;/u&gt;'''&lt;/big&gt; ===<br /> [[File:BE-TS Cable Retractor.png|alt=BE-TS Cable Retractor|frameless|585x585px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |CCR-12HD<br /> |TAKE UP REEL-CARRIER TRACK<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Operator Gate&lt;/big&gt;&lt;/u&gt;''' ===<br /> [[File:BE-TS Discontinued Drop Bar Operator Gate.png|alt=BE-TS Discontinued Drop Bar Operator Gate|frameless|568x568px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43015004<br /> |GATE-OPERATOR<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0407<br /> |BOLT-HHCS-3/8-16 X 2 3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |<br /> |<br /> |1<br /> |}<br /> [[File:BE-TS Operator Gate Continued.png|alt=BE-TS Operator Gate Continued|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43017064-2<br /> |LATCH-SWING GATE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0418<br /> |BOLT-HHCS-3/8-16 X 2 1/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0031<br /> |NUT-LOCK-3/8-16<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |N/A<br /> |HINGE-SPRING<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |5<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |HW1037<br /> |STOP-GATE<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0003<br /> |NUT-NILN-1/4-20<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |N/A<br /> |TORSION SPRING<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |11<br /> |HW0816<br /> |SCREW-HHCS-SELF DRILLING-#10 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |43806001<br /> |ANTI-FATIGUE MAT<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |43017058-2<br /> |THRESHOLD<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |HW0107<br /> |WASHER-LOCK3/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |HW9002<br /> |GAS SPRING<br /> |80292015<br /> |<br /> |1<br /> |-<br /> |19<br /> |43017086-2<br /> |BRACKET-MOUNTING-SPRING<br /> |80292015<br /> |<br /> |2<br /> |-<br /> |20<br /> |HW0815<br /> |SCREW-SELF DRILLING-#12-24 X 1&quot; T-4<br /> |80292015<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Part Discontinued. Spring Hinge and Torsion Spring must be replaced with Gas Spring Kit.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Guarding&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Outer Carriage Guards&lt;/big&gt;''''' ====<br /> <br /> ===== '''''1-Piece Outside Frame Guarding''''' =====<br /> [[File:BE-TS Outside Frame Guard 1-Piece.png|alt=BE-TS Outside Frame Guard 1-Piece|frameless|550x550px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817038<br /> |GUARD-FAR END-TOP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817037<br /> |GUARD-FAR END-MIDDLE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43817035<br /> |GUARD-FAR END-BOTTOM<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |33<br /> |}<br /> <br /> ===== '''''Split Outside Frame Guarding''''' =====<br /> [[File:BE-TS Outside Split Frame Guard.png|alt=BE-TS Outside Split Frame Guard|frameless|562x562px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817103<br /> |GUARD-FAR END-TOP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817102<br /> |GUARD-FAR END-MIDDLE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43817101<br /> |GUARD-FAR END-BOTTOM<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |37<br /> |}<br /> <br /> ==== '''&lt;big&gt;''Inner Carriage Guards''&lt;/big&gt;''' ====<br /> <br /> ===== '''''Inner Carriage Guards (Rotary Actuator)''''' =====<br /> [[File:BE-TS Inner Carriage Guard Rotary.png|alt=BE-TS Inner Carriage Guard (Rotary Actuator Units)|frameless|554x554px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817041-2<br /> |GUARD-FRONT-OPERATOR CONSOLE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817042-2<br /> |GUARD-INNER-FRAME<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |43014006-2<br /> |GUARD-LINEAR DRIVE SCREW<br /> |<br /> |<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |4<br /> |43017010-2<br /> |GUARD-SIDE-ARM CARRIER SHAFT<br /> |<br /> |<br /> |2<br /> |-<br /> |44517002-2<br /> |GUARD-SIDE-ARM CARRIER SHAFT<br /> |<br /> |''† Single compartment units only''<br /> |1<br /> |-<br /> |5<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |34<br /> |-<br /> |6<br /> |43017009-2<br /> |BRACKET-SCREW GUARD MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Single Compartment Guard replaces standard, Far Side Arm Carrier Shaft Guard.'' <br /> |}<br /> '''''Inner Carriage Guards (Helical Actuator)'''''<br /> <br /> [[File:BE-TS Inner Carriage Guard Helical Actuator.png|alt=BE-TS Inner Carriage Guard (Helical Actuator Units)|frameless|547x547px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817041-2<br /> |GUARD-FRONT-OPERATOR CONSOLE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817042-2<br /> |GUARD-INNER-FRAME<br /> |<br /> |<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |3<br /> |43017081-2<br /> |GUARD-SIDE-ARM CARRIER SHAFT<br /> |<br /> |<br /> |2<br /> |-<br /> |44517003-2<br /> |GUARD-SIDE-ARM CARRIER SHAFT<br /> |<br /> |''† Single compartment units only''<br /> |1<br /> |-<br /> |4<br /> |43017080-2<br /> |BRACKET-SIDE GUARD MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |43017082-3<br /> |MOUNT-CHAIN GUARD-LEAD SCREW<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43017082-4<br /> |MOUNT-CHAIN GUARD-LEAD SCREW<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |43017083-2<br /> |GUARD-CHAIN-LEAD SCREW<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0347<br /> |BOLT-BHSCS-1/4-20 X 3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |28<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Single Compartment Guard replaces standard, Far Side Arm Carrier Shaft Guard.'' <br /> |}<br /> <br /> ==== '''&lt;big&gt;''Dash &amp; Platform Guards''&lt;/big&gt;''' ====<br /> [[File:BE-TS Dash &amp; Platform Guards.png|alt=BE-TS Dash &amp; Platform Guards|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41614004-2<br /> |DASHBOARD-OPERATOR CONSOLE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817040<br /> |KICK PLATE-OPERATOR CONSOLE<br /> |<br /> |''41.5&quot; high''<br /> |1<br /> |-<br /> |3<br /> |43817086-2<br /> |DASHBOARD-OPERATOR CONSOLE<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43817088<br /> |KICK PLATE-OPERATOR CONSOLE<br /> |<br /> |''33.5&quot;'' ''high''<br /> |1<br /> |-<br /> |5<br /> |43817110-2<br /> |FRAME-DASHBOARD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |A/R<br /> |PLATE-DASHBOARD<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |7<br /> |HW0060<br /> |NUT-CLIP-#10-24<br /> |<br /> |<br /> |12<br /> |-<br /> |8<br /> |SS0114<br /> |BHSCS-#10-24 X 1/2&quot;-SST<br /> |<br /> |<br /> |12<br /> |-<br /> |9<br /> |PL0602<br /> |VINYL EDGING<br /> |<br /> |''At Foot Switch (Not shown)'' <br /> |1'<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Consult factory''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Lift Cylinder Guards&lt;/big&gt;''''' ====<br /> [[File:BE-TS Lift Cylinder Guards.png|alt=BE-TS Lift Cylinder Guards|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;2&quot; |1<br /> |43815016<br /> |GUARD-CLEVIS<br /> |<br /> |Operator right / Far left<br /> |2<br /> |-<br /> |43815017<br /> |GUARD-CLEVIS<br /> |<br /> |Operator left / Far right<br /> |2<br /> |-<br /> |2<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Labels &amp; Placards&lt;/big&gt;&lt;/u&gt;''' ===<br /> [[File:BE-TS Labels &amp; Placards Chassis.png|alt=BE-TS Labels &amp; Placards Chassis|frameless|546x546px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |00196616<br /> |LABEL-&quot;NO RIDERS ALLOWED&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |00196210<br /> |LABEL-WARNING-&quot;OPERATION BY AUTHORIZED PERSONNEL ONLY&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43696001<br /> |PLACARD-OFF / ON<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43096018<br /> |PLACARD-RACK LEVEL ASSIST<br /> |<br /> |''† If equipped''<br /> |1<br /> |-<br /> |5<br /> |43096015<br /> |PLACARD-PLATFORM RAISE / LOWER<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43096010<br /> |PLACARD-HORN<br /> |<br /> |''† If equipped''<br /> |1<br /> |-<br /> |7<br /> |43096016<br /> |PLACARD-DRIVE / ARM ROTATION<br /> |<br /> |<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |8<br /> |43096012<br /> |PLACARD-VACUUM OFF / ON<br /> |<br /> |''Vacuum units only''<br /> |1<br /> |-<br /> |43096011<br /> |PLACARD-MAGNET OFF / ON<br /> |<br /> |''Magnet units only (Not shown)''<br /> |1<br /> |-<br /> |9<br /> |43096017<br /> |PLACARD-POWERED ROLLER CUTOUT OVERRIDE<br /> |<br /> |''† If equipped''<br /> |1<br /> |-<br /> |10<br /> |43096013<br /> |PLACARD-POWERED ROLLERS / ARM TRAVERSE<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |00196633<br /> |LABEL-NOTICE-&quot;IN LINE VACUUM FILTER...&quot;<br /> |<br /> |''(1) per side (Vacuum units only)''<br /> |2<br /> |-<br /> |12<br /> |SM-1197<br /> |LABEL-ARM POSITION ARROW<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |00196609<br /> |LABEL-NOTICE-&quot;ARM MUST BE POSITIONED BETWEEN ARROWS...&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |00196602<br /> |LABEL-NOTICE-&quot;LUBRICATION POINTS ON UNDERSIDE&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |00196218<br /> |LABEL-WARNING-&quot;ELECTRICAL VOLTAGE HAZARD&quot;<br /> |<br /> |''Magnet units only''<br /> |1<br /> |-<br /> |16<br /> |00196238<br /> |LABEL-WARNING-&quot;STRONG MAGNETIC<br /> <br /> FIELD/DO NOT USE WITH PACEMAKER&quot;<br /> |<br /> |''†† Magnet units only''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Rack Level Assist (LAI), Horn and Powered Roller Cutout (PRC) are optional features. Not all units are equipped with these options.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Pacemaker Warning Label takes the place of the discontinued, Triangular Magnetic Field Label.''<br /> |}<br /> [[File:BE-TS Labels &amp; Placards Frame.png|alt=BE-TS Labels &amp; Placards Frame|frameless|549x549px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |00196004<br /> |LABEL-CAUTION-&quot;WATCH FOR BATTERY AND CHARGER CABLES IN TRAVEL PATH&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |00196216<br /> |LABEL-WARNING-&quot;CHAIN ENTANGLEMENT<br /> <br /> HAZARD&quot;<br /> |<br /> |''(1) per Clevis Guard'' <br /> |4<br /> |-<br /> |3<br /> |00196622<br /> |LABEL-LIFT POINT<br /> |<br /> |''(2) each end''<br /> |4<br /> |-<br /> |4<br /> |00196700<br /> |DECAL-BHS-24&quot; X 7.875&quot;<br /> |<br /> |''Far end (Not shown)''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |5<br /> |00196630<br /> |LABEL-NOTICE-HYD. OIL SPEC. (AW 68)<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |00196645<br /> |LABEL-NOTICE-HYD. OIL SPEC. (AW 32)<br /> |<br /> |''† See notes'' <br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |† Most units shipped prior to December 2014 require AW 68 Hydraulic Oil. Some units shipped prior to December 2014 shipped with AW 32 for low temperature applications.<br /> |}<br /> <br /> == &lt;big&gt;Extractor Arm&lt;/big&gt; ==<br /> {| class=&quot;wikitable&quot;<br /> !SYMBOL<br /> !DESCRIPTION / NOTICE<br /> !ACTUATOR DIAGRAM<br /> |-<br /> |[[File:IOP-400 BE-SL&amp;DS (10-23) Rotary Actuator Symbol.png|alt=Rotary Actuator Symbol|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Rotary_Actuator_Symbol.png]]<br /> |<br /> ==='''&lt;u&gt;&lt;big&gt;Rotary Actuator Symbol&lt;/big&gt;&lt;/u&gt;'''===<br /> Battery Extractors shipped prior to May 2020 are equipped with Rotary Actuator Extractor Arms. Parts Diagrams Specific to the Rotary Actuator design are indicated with the Rotary Actuator symbol.<br /> |[[File:IOP-400 BE-SL&amp;DS (10-23) Rotary Actuator Extractor Arm.png|alt=BE-TS Rotary Actuator|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Rotary_Actuator_Extractor_Arm.png]]<br /> |-<br /> |[[File:IOP-400 BE-SL&amp;DS (10-23) Helical Actuator Symbol.png|alt=Helical Actuator Symbol|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Helical_Actuator_Symbol.png]]<br /> |<br /> ===&lt;big&gt;'''&lt;u&gt;Helical Actuator Symbol&lt;/u&gt;'''&lt;/big&gt;===<br /> Battery Extractors shipped from May 2020 to Present are equipped with Helical Actuator Extractor Arms. Parts Diagrams Specific to the Rotary Actuator design are indicated with the Helical Actuator Symbol.<br /> |[[File:IOP-400 BE-SL&amp;DS (10-23) Helical Actuator Extractor Arm.png|alt=BE-TS Helical Actuator|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Helical_Actuator_Extractor_Arm.png]]<br /> |}<br /> ===&lt;big&gt;&lt;u&gt;Vacuum Components &amp; Swing Arms&lt;/u&gt;&lt;/big&gt;===<br /> ====''&lt;big&gt;Vacuum Arms (Rotary Actuator)&lt;/big&gt;''====<br /> [[File:BE-TS Vacuum Arms (Rotary Actuator).png|alt=BE-TS Vacuum Arms (Rotary Actuator)|frameless|619x619px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;2&quot; |1<br /> |N/A<br /> |ARM-PUSH/PULL-30&quot;<br /> |<br /> |''&lt;sup&gt;†&lt;/sup&gt; Discontinued''<br /> |1<br /> |-<br /> |N/A<br /> |ARM-PUSH/PULL-36&quot;<br /> |<br /> |''&lt;sup&gt;†&lt;/sup&gt; Discontinued''<br /> |1<br /> |-<br /> |2<br /> |HW0509<br /> |BOLT-HHCS-1/2-13 X 4 1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |P0505<br /> |BUSHING-RED-#6 NPT X #4 FNPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |P0402<br /> |HOSE BARB-1/4 X #4 MNPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0428<br /> |STUD-VACUUM-3/8-16 X 5&quot;<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |9<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |HW-KIT-2<br /> |<br /> |40<br /> |-<br /> |10<br /> |HW1001<br /> |SPRING-3/8&quot;<br /> |HW-KIT-2<br /> |<br /> |24<br /> |-<br /> |11<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |12<br /> |HW0424<br /> |NUT-JAM-3/8-16<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |REF<br /> |43052006<br /> |ADJUSTABLE PUSH/PULL ARM<br /> |<br /> |''Includes Items 13 through 17''<br /> |1<br /> |-<br /> |13<br /> |43057034<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |43055008<br /> |VACUUM CUP MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''&lt;sup&gt;†&lt;/sup&gt; One-piece Arms no longer available. Must replace with Adjustable Arm.''<br /> |}<br /> <br /> ====&lt;big&gt;''Vacuum Cups''&lt;/big&gt;====<br /> [[File:BE-TS Vacuum Cups.png|alt=Vacuum Cups|frameless|563x563px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;4&quot; |A/R<br /> |00162004<br /> |VACUUM CUP-10&quot; 3-PC (STANDARD)<br /> |<br /> |''&lt;sup&gt;†&lt;/sup&gt; Includes Items 1 through 4''<br /> | rowspan=&quot;4&quot; |A/R<br /> |-<br /> |00162003<br /> |VACUUM CUP-12&quot; 3-PC (STANDARD)<br /> |<br /> |''&lt;sup&gt;†&lt;/sup&gt; Includes Items 4 through 7''<br /> |-<br /> |00162007<br /> |VACUUM CUP-10&quot; 3-PC, REINFORCED<br /> |<br /> |''Includes Items 1,3,4 &amp; 8''<br /> |-<br /> |00162005<br /> |VACUUM CUP-12&quot; 3-PC, REINFORCED<br /> |<br /> |''Includes Items 4,5,7 &amp; 9''<br /> |-<br /> |1<br /> |00164006<br /> |CASTING-10&quot; VACUUM CUP<br /> |<br /> | rowspan=&quot;3&quot; |''10&quot; cup only''<br /> |1<br /> |-<br /> |2<br /> |00164004<br /> |SEAL-RUBBER-10&quot;<br /> |<br /> |1<br /> |-<br /> |3<br /> |00165002<br /> |PLATE-FRONT-10&quot;<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0311<br /> |BOLT-FHSCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |00166001<br /> |CASTING-12&quot; VACUUM CUP<br /> |<br /> | rowspan=&quot;3&quot; |''12&quot; cup only''<br /> |1<br /> |-<br /> |6<br /> |00164001<br /> |SEAL-RUBBER-12&quot;<br /> |<br /> |1<br /> |-<br /> |7<br /> |00165001<br /> |PLATE-FRONT-12&quot;<br /> |<br /> |1<br /> |-<br /> |8<br /> |00164007<br /> |SEAL-RUBBER-10&quot;-REINFORCED<br /> |<br /> |<br /> |A/R<br /> |-<br /> |9<br /> |00167003<br /> |SEAL-RUBBER-12&quot;-REINFORCED<br /> |<br /> |<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''&lt;sup&gt;†&lt;/sup&gt; 10&quot; and 12&quot; 1-Piece Cups no longer available. Must replace with 3-Piece Cup. Verify required cup size prior to ordering.''<br /> |}<br /> <br /> ====&lt;big&gt;''Swing Arms (Rotary Actuator)''&lt;/big&gt;====<br /> [[File:BE-TS Swing Arms (Rotary Actuator).png|alt=BE-TS Swing Arms (Rotary Actuator)|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> |ITEM<br /> |BHS PART NUMBER<br /> |DESCRIPTION<br /> |REF. KIT NO.<br /> |NOTES<br /> |NO. REQ<br /> |-<br /> | rowspan=&quot;3&quot; |1<br /> |45055001<br /> |TIE PLATE-SWING ARM<br /> |<br /> |BE-24-2-TS<br /> |1<br /> |-<br /> |45255001<br /> |TIE PLATE-SWING ARM<br /> |<br /> |BE-36-2-TS (NOT SHOWN)<br /> |1<br /> |-<br /> |45355001<br /> |TIE PLATE-SWING ARM<br /> |<br /> |BE-42-2-TS (NOT SHOWN)<br /> |1<br /> |-<br /> |2<br /> |43055004<br /> |SWING ARM-RHS<br /> |†<br /> |NOT SOLD INDIVIDUALLY<br /> |1<br /> |-<br /> |3<br /> |43055002<br /> |SWING ARM-LHS<br /> |†<br /> |NOT SOLD INDIVIDUALLY<br /> |1<br /> |-<br /> |4<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0113<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0010<br /> |NUT-JAM-5/8-11<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |PT0413<br /> |COLLAR-SHAFT-3&quot;<br /> |80252001<br /> |<br /> |2<br /> |-<br /> |8<br /> |43027001<br /> |SHAFT-ROTARY ACTUATOR<br /> |80252001<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW1013<br /> |KEY-3/8&quot; X 12&quot;<br /> |80252001<br /> |<br /> |1<br /> |-<br /> |10<br /> |PT0419<br /> |BEARING-SAE 841-2&quot; I.D., 3&quot; OD, 1/8&quot; THICK<br /> |80252001<br /> |<br /> |3<br /> |-<br /> |11<br /> |43052005<br /> |CAP-BEARING<br /> |<br /> |INCLUDES BEARING<br /> |2<br /> |-<br /> |12<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |13<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |14<br /> |43057014<br /> |STANDOFF-WIRE<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |HW0312<br /> |SCREW-SHSS-1/4-20 X 1&quot;-CUP POINT<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |43057003<br /> |CUSHION-SWING ARM<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |43055001<br /> |STOP-SWING ARM<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |20<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |21<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |H1565<br /> |ADAPTER-45 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |23<br /> |H1600<br /> |ADAPTER-90 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |&lt;sup&gt;†&lt;/sup&gt; ''Included in multiple kits.''<br /> |-<br /> | colspan=&quot;6&quot; |See ''Single Compartment Swing Arm Stop for the the Single Compartment Swing Arm Stop.''<br /> |}<br /> <br /> === '''''Vacuum Swing Arm Stop (Rotary Actuator)''''' ===<br /> [[File:BE-TS Single Compartment Swing Arms (Rotary Actuator).png|alt=BE-TS Single Compartment Swing Arms (Rotary Actuator)|frameless|575x575px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |44555001<br /> |STOP-SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43057003<br /> |CUSHION-SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43057008<br /> |SPACER-SWING ARM STOP<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |}<br /> ====''&lt;big&gt;Vacuum Pump (Rotary Actuator)&lt;/big&gt;''====<br /> [[File:BE-TS Vacuum Pumps (Rotary Actuator).png|alt=BE-TS Vacuum Pumps (Rotary Actuator)|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |P0005<br /> |PUMP-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |P0208<br /> |FILTER-HI FLOW<br /> |<br /> |<br /> |3<br /> |-<br /> |3<br /> |P0503<br /> |NIPPLE-#4 NPT-BRASS<br /> |<br /> |<br /> |3<br /> |-<br /> |4<br /> |P0502<br /> |TEE-#4 FNPT-BRASS<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |P0506<br /> |ELBOW-STR-90 DEG-#4 NPT-BRASS<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |P0402<br /> |HOSE BARB-1/4 X #4 NPTM-BRASS<br /> |<br /> |<br /> |6<br /> |-<br /> |7<br /> |P0207<br /> |VALVE-VACUUM RELEASE<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |P0302<br /> |HOSE-VACUUM-1/4&quot; I.D.<br /> |<br /> |''Two 6&quot; pieces''<br /> |1'<br /> |-<br /> |9<br /> |P0302<br /> |HOSE-VACUUM-1/4&quot; I.D.<br /> |<br /> |''Short Arm side''<br /> |1'<br /> |-<br /> |10<br /> |P0302<br /> |HOSE-VACUUM-1/4&quot; I.D.<br /> |<br /> |''Long Arm side''<br /> |2'<br /> |-<br /> |11<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |HW0212<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |E0624<br /> |CONNECTOR-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |15a<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |''Not shown''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |16<br /> |E0501<br /> |CORD-14-4 SW/SOW<br /> |<br /> |''Withtout Ground Connection in Arm''<br /> | rowspan=&quot;2&quot; |15'<br /> |-<br /> |E0514<br /> |CORD-16-5 SW/SOW<br /> |<br /> |<br /> |-<br /> |17<br /> |43057014<br /> |STANDOFF-CABLE<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |HW0206<br /> |SCREW-RHMS-#10-32 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |19<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |20<br /> |43057021<br /> |PLATE-STIFFENER<br /> |†<br /> |<br /> |2<br /> |-<br /> |21<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |†<br /> |<br /> |12<br /> |-<br /> |22<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |†<br /> |<br /> |12<br /> |-<br /> |23<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |†<br /> |<br /> |12<br /> |-<br /> |24<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |†<br /> |''Not shown''<br /> |24<br /> |-<br /> |25<br /> |P0111<br /> |FILTER-VACUUM-INLINE<br /> |<br /> |''Not shown''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |&lt;sup&gt;†&lt;/sup&gt; ''Included in multiple kits.''<br /> |}<br /> ===&lt;u&gt;&lt;big&gt;Rotary Actuator&lt;/big&gt;&lt;/u&gt;===<br /> [[File:BE-TS Rotary Actuator.png|alt=BE-TS Rotary Actuator|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43046001<br /> |ROTARY ACTUATOR<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |80000002<br /> |ROTARY ACTUATOR BASE ASSEMBLY<br /> |<br /> |''Without Actuator''<br /> |1<br /> |-<br /> |2A<br /> |N/A<br /> |VERTICAL CARRIER PLATE-OUTER<br /> |<br /> |''Included with 80000002''<br /> |2<br /> |-<br /> |2B<br /> |N/A<br /> |VERTICAL CARRIER PLATE-INNER<br /> |<br /> |''Included with 80000002''<br /> |1<br /> |-<br /> |2C<br /> |N/A<br /> |CARRIER BASE PLATE<br /> |<br /> |''Included with 80000002''<br /> |1<br /> |-<br /> |3<br /> |HW1070<br /> |PIN-PULL DOWEL-5/8&quot; X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0508<br /> |BOLT-SHCS-1/2-13 X 3/4&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW1045<br /> |PIN-PULL DOWEL-3/8&quot; X 1 1/2&quot;<br /> |<br /> |''Included with 80000002''<br /> |6<br /> |-<br /> |6<br /> |HW0412<br /> |BOLT-SHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |''Included with 80000002''<br /> |12<br /> |-<br /> |7<br /> |H0010<br /> |FITTING-BULKHEAD-3/4-16 X #4 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 NPTM<br /> |<br /> |<br /> |2<br /> |}<br /> ===&lt;u&gt;&lt;big&gt;Carrier Shafts &amp; Bearings ''(Rotary Actuator)''&lt;/big&gt;&lt;/u&gt;===<br /> [[File:BE-TS Rotary Actuator Carrier Shafts.png|alt=BE-TS Carrier Shafts (Rotary Actuator)|frameless|560x560px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43057045<br /> |CARRIER SHAFT-EXTRACTOR ARM<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |2<br /> |43054007<br /> |BEARING-EXTRACTOR ARM CARRIER<br /> |80252002<br /> |''†† See notes''<br /> |4<br /> |-<br /> |3<br /> |HW0412<br /> |BOLT-SHCS-3/8-16 X 1 1/4&quot;<br /> |80252002<br /> |<br /> |16<br /> |-<br /> |4<br /> |PT0413<br /> |COLLAR-SHAFT-3&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |PT0624<br /> |FITTING-ZERK<br /> |80252002<br /> |''Not shown''<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† See Vacuum Extended Reach section for Extended Reach equipped units.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Carrier Shafts &amp; Bearings (Helical Actuator) section for Helical Actuator equipped units.''<br /> |}<br /> <br /> ===&lt;u&gt;&lt;big&gt;Drive Screw Components ''(Rotary Actuator)''&lt;/big&gt;&lt;/u&gt;===<br /> ====''&lt;big&gt;Drive Nut Assembly (Rotary Actuator)&lt;/big&gt;''====<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Drive Nut Assembly Rotary Actuator.png|alt=BE-SL&amp;DS Drive Nut Assembly Rotary Actuator|frameless|537x537px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Drive_Nut_Assembly_Rotary_Actuator.png]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43054006<br /> |DRIVE NUT ASSEMBLY<br /> |80252003<br /> |&lt;sup&gt;''†''&lt;/sup&gt; ''See notes''<br /> |1<br /> |-<br /> |2<br /> |HW0426<br /> |BOLT-SHCS-3/8-16 X 5 1/2&quot;<br /> |80252003<br /> |&lt;sup&gt;''††''&lt;/sup&gt; ''See notes''<br /> |4<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |80252003<br /> |&lt;sup&gt;''††''&lt;/sup&gt; ''See notes''<br /> |4<br /> |-<br /> |4<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |80252003<br /> |&lt;sup&gt;''††''&lt;/sup&gt; ''See notes''<br /> |4<br /> |-<br /> |5<br /> |PT0624<br /> |FITTING-ZERK<br /> |80252003<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''&lt;sup&gt;†&lt;/sup&gt; See Drive Screw Components (Helical Actuator) section for Helical Actuator equipped units.''<br /> |-<br /> | colspan=&quot;6&quot; |''&lt;sup&gt;††&lt;/sup&gt; It is recommended to replace mounting hardware when replacing Drive Nut Assembly.''<br /> |}<br /> ====''&lt;big&gt;Drive Screw&lt;/big&gt;''====<br /> =====''[Current] Drive Screw Assembly (Frame #'s 374 to Present)''=====<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Drive Screw Rotary Current.png|alt=Current BE-SL &amp; BE-DS Drive Screw (Rotary Actuator)|frameless|531x531px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Drive_Screw_Rotary_Current.png]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43024001<br /> |SCREW-LINEAR DRIVE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |PT0119<br /> |SPROCKET-50B15 X 1 3/16&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43097004<br /> |KEY-1/4 X 7/8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |00158001-15<br /> |CHAIN-ROLLER-#50<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |PT0102<br /> |LINK-CONNECTING-#50<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |PT0406<br /> |FLANGE BEARING-4 BOLT-1 3/16&quot;<br /> |<br /> |''Alloy casting''<br /> |2<br /> |-<br /> |7<br /> |HW0503<br /> |BOLT-HHCS-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |PT0107<br /> |SPROCKET-50B15 X 1&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HC0121<br /> |MOTOR-HYDRAULIC-100CC<br /> |<br /> |''SAE 2-Bolt mount''<br /> |1<br /> |-<br /> |11<br /> |H1605<br /> |ADAPTER-90 DEG-#6 JICM X #10 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW1071<br /> |KEY-WOODRUFF-#808 STD<br /> |<br /> |''Supplied with Item 10''<br /> |A/R<br /> |-<br /> |13<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |14<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |15<br /> |43017007<br /> |PLATE-MOUNTING-SCREW DRIVE MOTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |43057019<br /> |PLATE-COVER<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0415<br /> |BOLT-SHCS-3/8-16 X 3/4&quot;<br /> |<br /> |<br /> |8<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> ! colspan=&quot;6&quot; |ITEMS BELOW ARE REQUIRED FOR REPLACING THE LINEAR DRIVE<br /> SCREW ON UNITS WITH FRAME #'S OF 373 AND EARLIER<br /> |-<br /> ! colspan=&quot;6&quot; |LINEAR DRIVE SCREW UPDATE KIT<br /> |-<br /> |REF<br /> |80252011<br /> |UPGRADE KIT<br /> |<br /> |<br /> |1<br /> |-<br /> |1<br /> |43024001<br /> |SCREW-LINEAR DRIVE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |PT0119<br /> |SPROCKET-50B15 X 1 3/16&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43097004<br /> |KEY-1/4 X 7/8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |PT0406<br /> |FLANGE BEARING-4 BOLT-1 3/16&quot;<br /> |<br /> |''Alloy casting''<br /> |2<br /> |-<br /> |7<br /> |HW0503<br /> |BOLT-HHCS-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |16<br /> |43057019<br /> |PLATE-COVER<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |43057022<br /> |SHIM-18GA<br /> |<br /> |''May not be required (Not shown)''<br /> |2<br /> |-<br /> |19<br /> |43057018<br /> |TEMPLATE-BEARING MOUNT PATTERN<br /> |<br /> |''Not shown''<br /> |1<br /> |-<br /> |20<br /> |80000015<br /> |INSTRUCTION DETAIL<br /> |<br /> |''Not shown''<br /> |REF<br /> |-<br /> |21<br /> |43057020<br /> |SPACER PLATE<br /> |<br /> |''Not shown''<br /> |2<br /> |}<br /> =====''[Discontinued] Drive Screw Assembly (Frame #'s 373 and Earlier)''=====<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Drive Screw (Rotary Actuator) Discontinued.png|alt=Discontinued BE-SL &amp; BE-DS Drive Screw (Rotary Actuator)|frameless|532x532px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Drive_Screw_(Rotary_Actuator)_Discontinued.png]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |SCREW-LINEAR DRIVE (DISCONTINUED)<br /> |<br /> |''See 80252011 Upgrade Kit''<br /> |1<br /> |-<br /> |2<br /> |PT0118<br /> |SPROCKET-50B12 X 1 3/16&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43097004<br /> |KEY-1/4&quot; X 7/8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |00158001-15<br /> |CHAIN-ROLLER-#50<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |PT0102<br /> |LINK-CONNECTING-#50<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43057016<br /> |BLOCK-BEARING RETAINER<br /> |<br /> |<br /> |2<br /> |-<br /> |6a<br /> |PT0414<br /> |RACE-TAPERED ROLLER BEARING<br /> |<br /> |''Included with 43057016''<br /> |2<br /> |-<br /> |7<br /> |PT0623<br /> |SEAL-GREASE<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0416<br /> |BOLT-SHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |PT0415<br /> |BEARING-TAPERED ROLLER<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW1050<br /> |NUT-LOCK<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |43057017<br /> |PLATE-COVER<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0415<br /> |BOLT-SHCS-3/8-16 X 3/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |13<br /> |PT0624<br /> |FITTING-ZERK<br /> |<br /> |<br /> |2<br /> |}<br /> ===&lt;big&gt;&lt;u&gt;Hose Carrier Plate&lt;/u&gt;&lt;/big&gt;===<br /> [[File:BE-TS Hose Carrier Plate.png|alt=BE-TS Hose Carrier Plate|frameless|554x554px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43915018<br /> |PLATE-HOSE CARRIER<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |PT0618<br /> |BRACKET-FIXED END<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |PT0617<br /> |HOSE CARRIER<br /> |<br /> |''20 links required''<br /> |3 FT<br /> |-<br /> |5<br /> |PT0619<br /> |BRACKET-MOVING END<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |9<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |10<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HC0262<br /> |VALVE-CROSS PORT RELIEF<br /> |<br /> |''Includes cartridges''<br /> |1<br /> |-<br /> |12a<br /> |43846002<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''†† For Item 12 (Not shown)''<br /> |2<br /> |-<br /> |13<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |H1560<br /> |ADAPTER-45 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |E1329<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |''PVC - Includes cover''<br /> |1<br /> |-<br /> |19<br /> |HW0212<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |20<br /> |HW0102<br /> |WASHER-FLAT-#10-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |21<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |22<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |23<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |''For Items 21 &amp; 22 (Not shown)''<br /> |3<br /> |-<br /> |24<br /> |HW1076<br /> |BOLT-FHSCS-3/8-16 X 1&quot;<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Units built prior to February 2014 without extended reach option use (4) HW0403 mounting bolts.''<br /> <br /> ''†† Cartridges are for replacement only.''<br /> |}<br /> <br /> === &lt;big&gt;'''&lt;u&gt;Magnet Components ''(Rotary Actuator)''&lt;/u&gt;'''&lt;/big&gt; ===<br /> <br /> ==== '''''&lt;big&gt;[Discontinued] Magnet Arm Configuration&lt;/big&gt;''''' ====<br /> [[File:BE-TS (Discontinued) Magnet Arm Configuration.png|alt=BE-TS (Discontinued) Magnet Arm Configuration|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41257014<br /> |TIE PLATE-SWING ARM<br /> |<br /> |''All units''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |41655008<br /> |EXTENSION-ARM<br /> |<br /> |''BE-36 only (Not shown)''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |43455001<br /> |EXTENSION-ARM<br /> |<br /> |''BE-42 only (Not shown)''<br /> |1<br /> |-<br /> |2<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0113<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0010<br /> |NUT-JAM-5/8-11<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |41655001<br /> |CARRIER TUBE-MAGNET SWING SHAFT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |7<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |9<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |6<br /> |-<br /> |10<br /> |41657006<br /> |SHAFT-MAGNET SWING<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |41698001<br /> |KEY-3/8&quot; X 7/16&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |N/A<br /> |STOP-MAGNET SWING<br /> |<br /> |''† Dicontinued''<br /> |1<br /> |-<br /> |13<br /> |PT0430<br /> |FLANGE BEARING-4 BOLT-1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |HW0513<br /> |BOLT-HHCS-1/2-13 X 2 1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |15<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |16<br /> |-<br /> |16<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |17<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |-<br /> |18<br /> |41655002<br /> |PLATE-MAGNET MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |41257015<br /> |BLOCK-TIGHTENER<br /> |<br /> |''2-piece item''<br /> |1<br /> |-<br /> |20<br /> |41257016<br /> |BLOCK-FIXED<br /> |<br /> |''2-piece item''<br /> |1<br /> |-<br /> |21<br /> |HW0423<br /> |BOLT-SHCS-3/8-16 X 3 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0806<br /> |SET SCREW-3/8-16 X 2&quot;<br /> |<br /> |''Replaces Swivel Head''<br /> |4<br /> |-<br /> |24<br /> |HW0424<br /> |NUT-JAM-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |25<br /> |41657017<br /> |INSULATOR-MAGNET MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |26<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |27<br /> |41657008<br /> |PAD-MAGNET SLIDE<br /> |<br /> |<br /> |2<br /> |-<br /> |28<br /> |HW0314<br /> |BOLT-FHSCS-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Refer to [Current] Magnet Arm Configuration (Rotary Actuator) section for replacement / upgrade parts.''<br /> |}<br /> <br /> ==== '''&lt;big&gt;''[Current] Magnet Arm Configuration (Rotary Actuator)''&lt;/big&gt;''' ====<br /> [[File:BE-TS (Current) Magnet Arm Configuration.png|alt=BE-TS (Current) Magnet Arm Configuration|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |80252012<br /> |MAGNET SWING STOP KIT<br /> |<br /> |''Includes Items 1 through 6''<br /> |A/R<br /> |-<br /> |1<br /> |43057029<br /> |PLATE-STOP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43058003<br /> |SLEEVE-STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |43057030<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |PL0501<br /> |GROMMET-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0509<br /> |BOLT-HHCS-1/2-13 X 4 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |44557003<br /> |PLATE-STOP<br /> |<br /> |''† Single compartment units only''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† For units equipped with Pivot Shaft. See [Current] Magnet Arm Configuration (Rotary Actuator) for units with Independent Magnet Pivot Bearings.'' <br /> |}<br /> '''&lt;big&gt;''Magnet Pivot Stop (Rotary Actuator)''&lt;/big&gt;'''<br /> <br /> [[File:BE-TS Magnet Pivot Stop.png|alt=BE-TS Magnet Pivot Stop|frameless|547x547px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |MAGNET PUSH/PULL ARM<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |43055010<br /> |MAGNET MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |PT0470<br /> |BEARING-MAGNET PIVOT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0525<br /> |BOLT-CARRIAGE-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |5<br /> |HW0524<br /> |BOLT-CARRIAGE-1/2-13 X 2&quot;<br /> |<br /> |''†† Stop Plate location''<br /> |4<br /> |-<br /> |6<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |7<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |16<br /> |-<br /> |8<br /> |43058009<br /> |PLATE-ROTATION STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |43058003<br /> |SLEEVE-STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43058010<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |PL0501<br /> |GROMMET-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |43057037<br /> |INSULATOR-BOTTOM<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |16<br /> |41657008<br /> |SLIDE-MAGNET<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0314<br /> |BOLT-FHSCS-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |44558001<br /> |PLATE-ROTATION STOP<br /> |<br /> |''†† Single compartment units only''<br /> |2<br /> |-<br /> |REF<br /> |43052014<br /> |ADJUSTABLE PUSH-PULL ARM<br /> |<br /> |''Includes Items 19-23''<br /> |A/R<br /> |-<br /> |19<br /> |43055018<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |20<br /> |43055019<br /> |MAGNET MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |21<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |22<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† 1-Piece Arm no longer available. Must be replaced with Adjustable Arm.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Single compartment Stop Plates require (1) additional 2&quot; long Carriage Bolt each''<br /> |}<br /> <br /> ==== &lt;big&gt;''Magnet Mounting Hardware (Rotary Actuator)''&lt;/big&gt; ====<br /> [[File:BE-TS Magnet Mounting Hardware (Rotary Actuator).png|alt=BE-TS Magnet Mounting Hardware (Rotary Actuator)|frameless|554x554px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43032009<br /> |MAGNET ASSEMBLY<br /> |<br /> |''Includes Items 1 through 12''<br /> |A/R<br /> |-<br /> |1<br /> |N/A<br /> |ELECTROMAGNET-95VDC<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |E0314<br /> |SENSOR-PROXIMITY-30MM<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |N/A<br /> |GASKET-REAR<br /> |<br /> |''Discontinued - Not used''<br /> |2<br /> |-<br /> |4<br /> |41657002<br /> |COVER-PROXIMITY SENSOR HOUSING<br /> |<br /> |''Rear''<br /> |2<br /> |-<br /> |5<br /> |HW1065<br /> |SCREW-SHCS-#6-32 X 3/8&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |6<br /> |HW1066<br /> |WASHER-LOCK-#6<br /> |<br /> |<br /> |8<br /> |-<br /> |7<br /> |E0376<br /> |INDICATOR LIGHT<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |8<br /> |E0335<br /> |RECEPTACLE-5 PIN MALE<br /> |<br /> |''With 12&quot; lead''<br /> |2<br /> |-<br /> |9<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |N/A<br /> |GASKET-FRONT<br /> |<br /> |''Discontinued - Not used''<br /> |2<br /> |-<br /> |11<br /> |41657003<br /> |COVER-PROXIMITY SENSOR HOUSING<br /> |80252015<br /> |''Front''<br /> |2<br /> |-<br /> |12<br /> |HW0138<br /> |SCREW-FHSCS-#8-32 X 3/8&quot;<br /> |80252015<br /> |<br /> |8<br /> |-<br /> |13<br /> |HW0433<br /> |STUD-1/2-13 X 5&quot;<br /> |80252006<br /> | rowspan=&quot;5&quot; |''For units with Magnet Pivot Shaft only.'' <br /> <br /> ''See [Discontinued] Magnet Arm Configuration for units built prior to 11/01/14''<br /> |8<br /> |-<br /> |14<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |80252006<br /> |8<br /> |-<br /> |15<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |80252006<br /> |40<br /> |-<br /> |16<br /> |HW1002<br /> |SPRING-1/2&quot;<br /> |80252006<br /> |24<br /> |-<br /> |17<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |80252006<br /> |8<br /> |-<br /> |18<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |80252014<br /> | rowspan=&quot;4&quot; |''For units with independent Pivot Bearings only.'' <br /> <br /> ''See [Current] Magnet Arm Configuration for units built 11/01/14 to present)''<br /> |4<br /> |-<br /> |19<br /> |HW1002<br /> |SPRING-1/2&quot;<br /> |80252014<br /> |4<br /> |-<br /> |20<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |80252014<br /> |8<br /> |-<br /> |21<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |80252014<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Extractors built or replacement magnets shipped prior to October 2021 used multi-piece indicator lights with replaceable bulb and lens and are no longer available. Current indicator light is a 1-piece LED assembly. Replacement of any multi-piece component requires replacing entire assembly with current, 1-piece indicator light.''<br /> |}<br /> <br /> === '''''Magnet Cords (Rotary Actuator)''''' ===<br /> [[File:BE-TS Magnet Cords.png|alt=BE-TS Magnet Cords|frameless|555x555px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1105<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |''Weather proof box''<br /> |1<br /> |-<br /> |2<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |E1106<br /> |COVER-JUNCTION BOX<br /> |<br /> |''Weather proof with gasket'' <br /> |1<br /> |-<br /> |4<br /> |E0333<br /> |RECEPTACLE-9 PIN MALE<br /> |<br /> |''With 12&quot; lead''<br /> |1<br /> |-<br /> |5<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |6<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |7<br /> |E0334<br /> |CORD-5 PIN FEMALE<br /> |<br /> |''With 36&quot; lead''<br /> |2<br /> |-<br /> |8<br /> |E0332<br /> |CORD-9 PIN FEMALE-90 DEG<br /> |<br /> |''With 36&quot; lead''<br /> |1<br /> |-<br /> |9<br /> |PL0501<br /> |GROMMET-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |41657013-2<br /> |PLATE-PANEL MOUNTING<br /> |<br /> |''With single cable hole''<br /> |1<br /> |-<br /> |11<br /> |E0334-6<br /> |CORD-5 PIN FEMALE<br /> |<br /> |''With 72&quot; lead''<br /> |2<br /> |-<br /> |12<br /> |43057038-2<br /> |PLATE-PANEL MOUNTING<br /> |<br /> |''With dual cable holes''<br /> |1<br /> |}<br /> '''''&lt;big&gt;Magnet Panel Mounting (Rotary Actuator)&lt;/big&gt;'''''<br /> <br /> [[File:BE-TS Panel Mounting (Rotary Actuator).png|alt=BE-TS Panel Mounting (Rotary Actuator)|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43057021<br /> |PLATE-STIFFENER<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |''Not shown''<br /> |24<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |5<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |12<br /> |-<br /> |6<br /> |41637001<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0325<br /> |BOLT-5/16-18 X 1 3/4&quot;-PAN HEAD<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |N/A<br /> |INSULATOR-THREADED FEMALE<br /> |<br /> |''Discontinued''<br /> |4<br /> |-<br /> |9<br /> |HW0106<br /> |WASHER-FLAT-5/16&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0326<br /> |NUT-NILN-5/16-18<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |E1016<br /> |FUSE HOLDER<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |E0325<br /> |FUSE-7AMP-250VAC<br /> |<br /> |''FLM-7 or FNM-7''<br /> |1<br /> |-<br /> |16<br /> |PL0307<br /> |INSULATOR-MALE STUD<br /> |<br /> |<br /> |4<br /> |}<br /> '''''&lt;big&gt;Magnet Extractor Electrical Panel (Rotary Actuator)&lt;/big&gt;'''''<br /> <br /> [[File:BE-TS Magnet Extractor Electrical Panel (Rotary Actuator).png|alt=BE-TS Magnet Extractor Electrical Panel (Rotary Actuator)|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41637001<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41637002<br /> |WIRE WAY<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |41637003<br /> |WIRE WAY<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |41637004<br /> |TRACK-TERMINAL BLOCK MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |41637005<br /> |TRACK-TERMINAL BLOCK MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |7<br /> |HW0132<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |<br /> |10<br /> |-<br /> |8<br /> |HW0133<br /> |NUT-NILN-#8-32<br /> |<br /> |''Not shown''<br /> |16<br /> |-<br /> |9<br /> |E1020<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |12<br /> |-<br /> |10<br /> |E1040<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |E1330<br /> |END ANCHOR<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |E1009<br /> |RECTIFIER-FULL WAVE BRIDGE<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |HW0135<br /> |SCREW-RHMS-#8-32 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |E1313<br /> |SOCKET-RELAY-8 PIN<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0139<br /> |SCREW-RHMS-#8-32 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |E0331<br /> |RELAY-DPDT-110VAC<br /> |<br /> |''with Indicator Light''<br /> |2<br /> |}<br /> <br /> === &lt;big&gt;'''&lt;u&gt;Swing Arm Stop (Rotary Actuator)&lt;/u&gt;'''&lt;/big&gt; ===<br /> [[File:BE-TS Swing Arm Stop (Rotary Actuator).png|alt=BE-TS Swing Arm Stop (Rotary Actuator)|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055007<br /> |MOUNT-STOP-SWING ARM<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |2<br /> |43057024<br /> |STOP-SWING ARM<br /> |<br /> |''BE-24''<br /> |4<br /> |-<br /> |43057023<br /> |STOP-SWING ARM<br /> |<br /> |''BE-36 &amp; BE-42''<br /> |4<br /> |-<br /> |3<br /> |HW0304<br /> |BOLT-HHCS-1/4-20 X 1 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† See Vacuum Swing Arm Stop (Rotary Actuator) section for single compartment stop mount and stop.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Extended Reach (Rotary Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Vacuum Extended Reach (Rotary Actuator).png|alt=BE-TS Vacuum Extended Reach (Rotary Actuator)|frameless|536x536px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41257014<br /> |TIE PLATE-SWING ARM<br /> |<br /> |''All units''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |41655008<br /> |EXTENSION-ARM<br /> |<br /> |''BE-36 only (Not shown)''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |43455001<br /> |EXTENSION-ARM<br /> |<br /> |''BE-42 only (Not shown)''<br /> |1<br /> |-<br /> |2<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |P0301-1<br /> |HOSE-COIL-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |41257035<br /> |STANDOFF<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW1072<br /> |RESTRAINT-HOSE<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0318<br /> |BOLT-SHCS-1/4-20 X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |HW0312<br /> |SCREW-SHSS-1/4-20 X 1&quot;-CUP POINT<br /> |<br /> |<br /> |1<br /> |}<br /> [[File:BE-TS Vacuum Extended Reach (Rotary Actuator) 2.png|alt=BE-TS Vacuum Extended Reach (Rotary Actuator)|frameless|547x547px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41255005<br /> |ARM-EXTENSION-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0416<br /> |CYLINDER-EXTENDED REACH-VACUUM<br /> |<br /> |''2 1/2&quot; X 12&quot; Cylinder''<br /> |1<br /> |-<br /> |3<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JICM X #6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |41257031<br /> |PIN-CLEVIS END<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |00197036<br /> |PIN-ROD END<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1058<br /> |PIN-HITCH<br /> |<br /> |<br /> |4<br /> |}<br /> [[File:BE-TS Vacuum Extended Reach (Rotary Actuator) 3.png|alt=BE-TS Vacuum Extended Reach (Rotary Actuator) 3|frameless|541x541px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41255004<br /> |HOUSING-EXTENDED REACH-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41257030<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |41258002<br /> |PLATE-BEARING<br /> |80258001<br /> |''Side''<br /> |2<br /> |-<br /> |8<br /> |41258005<br /> |PLATE-SHIM<br /> |80258001<br /> |''Side''<br /> |2<br /> |-<br /> |9<br /> |41258003<br /> |PLATE-BEARING<br /> |80258001<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |10<br /> |41258004<br /> |PLATE-SHIM<br /> |80258001<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |11<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |28<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |28<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Extended Reach (Rotary Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Extended Reach Rotary Actuator.png|alt=BE-TS Extended Reach Rotary Actuator|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43046001<br /> |ROTARY ACTUATOR<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |80000002<br /> |ROTARY ACTUATOR BASE ASSEMBLY<br /> |<br /> |''Without Actuator''<br /> |1<br /> |-<br /> |2A<br /> |N/A<br /> |VERTICAL CARRIER PLATE-OUTER<br /> |<br /> |''Included with 80000002''<br /> |2<br /> |-<br /> |2B<br /> |N/A<br /> |VERTICAL CARRIER PLATE-INNER<br /> |<br /> |''Included with 80000002''<br /> |1<br /> |-<br /> |2C<br /> |N/A<br /> |CARRIER BASE PLATE<br /> |<br /> |''Included with 80000002''<br /> |1<br /> |-<br /> |3<br /> |HW1070<br /> |PIN-PULL DOWEL-5/8&quot; X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0508<br /> |BOLT-SHCS-1/2-13 X 3/4&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW1045<br /> |PIN-PULL DOWEL-3/8&quot; X 1 1/2&quot;<br /> |<br /> |''Included with 80000002''<br /> |6<br /> |-<br /> |6<br /> |HW0412<br /> |BOLT-SHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |''Included with 80000002''<br /> |12<br /> |-<br /> |7<br /> |H0010<br /> |FITTING-BULKHEAD-3/4-16 X #4 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |4<br /> |}<br /> [[File:BE-TS Extended Reach Rotary Actuator 2.png|alt=BE-TS Extended Reach Rotary Actuator |frameless|535x535px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PT0634<br /> |BRACKET-MALE END<br /> |<br /> |''Sols as a set''<br /> |1<br /> |-<br /> |2<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |10<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |PT0627<br /> |HOSE CARRIER<br /> |<br /> |''14 links required''<br /> |39&quot;<br /> |-<br /> |7<br /> |PT0634<br /> |BRACKET-FEMALE END<br /> |<br /> |''Sols as a set''<br /> |1<br /> |-<br /> |8<br /> |HC0262<br /> |VALVE-CROSS PORT RELIEF<br /> |<br /> |<br /> |1<br /> |-<br /> |8a<br /> |43046003<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''† For Item 8 (Not shown)''<br /> |2<br /> |-<br /> |9<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |H1546<br /> |ADAPTER-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |H1617<br /> |ADAPTER-45 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HC0237<br /> |VALVE-SEQUENCING<br /> |<br /> |<br /> |1<br /> |-<br /> |12a<br /> |43046005<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''† For Item 12 (Not shown)''<br /> |A/R<br /> |-<br /> |13<br /> |HW0317<br /> |BOLT-HHCS-1/4-20 X 3 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |H1560<br /> |ADAPTER-45 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |H1600<br /> |ADAPTER-90 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Cartridges are for replacement only''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Extended Reach (Rotary Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Extended Reach (Rotary Actuator).png|alt=BE-TS Magnet Extended Reach (Rotary Actuator)|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055011<br /> |ARM-EXTENSION-MAGNET<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0415<br /> |CYLINDER-EXTENDED REACH-MAGNET<br /> |<br /> |''2 1/2&quot; X 8&quot; Cylinder''<br /> |1<br /> |-<br /> |3<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JICM X #6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CLEVIS END<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-ROD END<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-EXTERNAL-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW1043<br /> |CLAMP-CYLINDER<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |43057044-2<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |43058019<br /> |SUPPORT-CABLE-BAND CLAMP<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> [[File:BE-TS Magnet Extended Reach (Rotary Actuator) 2.png|alt=BE-TS Magnet Extended Reach (Rotary Actuator) |frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055012<br /> |HOUSING-EXTENDED REACH-MAGNET<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |43058013<br /> |PLATE-BEARING-SIDE<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |43058016<br /> |PLATE-SHIM-SIDE<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |43058014<br /> |PLATE-BEARING-UPPER/LOWER<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43058015<br /> |PLATE-SHIM-UPPER/LOWER<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |24<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |24<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Extended Reach End Plate&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Extended Reach End Plate.png|alt=BE-TS Extended Reach End Plate|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |CARRIER SHAFT-EXTRACTOR ARM<br /> |<br /> |''† 3-Hole version''<br /> |A/R<br /> |-<br /> |2<br /> |PT0413<br /> |COLLAR-SHAFT-3&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |50057009<br /> |PLATE-END-3 HOLE<br /> |<br /> |''Replacement part only''<br /> |4<br /> |-<br /> |4<br /> |50057010<br /> |SHIM-END PLATE<br /> |<br /> |''†† See notes''<br /> |A/R<br /> |-<br /> |5<br /> |HW1076<br /> |BOLT-FHSCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |6<br /> |43057045<br /> |CARRIER SHAFT-EXTRACTOR ARM<br /> |<br /> |''1-Hole version''<br /> |2<br /> |-<br /> |7<br /> |43017076<br /> |PLATE-END-1 HOLE<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† 3-Hole Carrier Shaft no longer available. Must replace 3-Hole shaft with current, 1-Hole version along with new ennd plates &amp; hardware.'' <br /> |-<br /> | colspan=&quot;6&quot; |''†† Shim quantity varies due to manufacturing tolerances.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Carrier Shafts &amp; Bearings&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Carrier Shafts &amp; Bearings (Helical Actuator).png|alt=BE-TS Carrier Shafts &amp; Bearings (Helical Actuator)|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43057045<br /> |CARRIER SHAFT-EXTRACTOR ARM<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |2<br /> |43054007<br /> |BEARING-EXTRACTOR ARM CARRIER<br /> |80252002<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0412<br /> |BOLT-SHCS-3/8-16 X 1 1/4&quot;<br /> |80252002<br /> |<br /> |16<br /> |-<br /> |4<br /> |PT0413<br /> |COLLAR-SHAFT-3&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |50057010<br /> |SHIM-END PLATE<br /> |<br /> |<br /> |A/R<br /> |-<br /> |6<br /> |43017076<br /> |PLATE-END-1 HOLE<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |PT0624<br /> |FITTING-ZERK<br /> |80252002<br /> |''Not shown''<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† See Extended Reach End Plate section for Extended Reach equipped units.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Drive Nut Assembly (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Drive Nut Assembly (Helical Actuator).png|alt=BE-TS Drive Nut Assembly (Helical Actuator)|frameless|600x600px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43054006<br /> |DRIVE NUT ASSEMBLY<br /> |80252003<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0426<br /> |BOLT-SHCS-3/8-16 X 5 1/2&quot;<br /> |80252003<br /> |''† See notes''<br /> |4<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |80252003<br /> |''† See notes''<br /> |4<br /> |-<br /> |4<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |80252003<br /> |''† See notes''<br /> |4<br /> |-<br /> |5<br /> |PT0624<br /> |FITTING-ZERK<br /> |80252003<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† It is recommended to replce mounting hardware when replacing Drive Nut Assembly.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Swing Arms &amp; Actuator (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;[Discontinued] Helical Actuator&lt;/big&gt;''''' ====<br /> [[File:BE-TS Swing Arms &amp; Actuator (Helical Actuator).png|alt=BE-TS [Discontinued] Swing Arms &amp; Actuator (Helical Actuator)|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |HELICAL ACTUATOR<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |43057046<br /> |ACTUATOR BASE PLATE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43058022<br /> |SPACER-ACTUATOR<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0725<br /> |BOLT-HHCS-3/4-16 X 4-3/4&quot;-GR8<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0066<br /> |NUT-JAM-3/4-16-GR8<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43055013<br /> |SWING ARM-LHS<br /> |<br /> | rowspan=&quot;6&quot; |''†† See notes''<br /> |1<br /> |-<br /> |7<br /> |HW0620<br /> |BOLT-HHCS-5/8-11 X 1-1/4&quot;<br /> |<br /> |6<br /> |-<br /> |8<br /> |HW0013<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |6<br /> |-<br /> |9<br /> |43055014<br /> |SWING ARM-RHS<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1-1/4&quot;<br /> |<br /> |6<br /> |-<br /> |11<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |6<br /> |-<br /> |12<br /> |43042008<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |43042010<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE, LONG<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |H1619<br /> |ADAPTER-90 DEG-#6 JICM X #4 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |H0010<br /> |FITTING-H-BULKHEAD-1/4 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |H1504<br /> |ADAPTER-#6 JICM X #4 NPTM<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW1082<br /> |CLAMP-HOSE<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Discontinued Helical Actuator no longer available. Must replace with current Helical Actuator Retro Kit 80252032. See [Current] Helical Actuator.'' <br /> <br /> ''†† Swing arms manufactured prior to January 2022 use 10 bolts &amp; washers per Swing Arm.'' <br /> |}<br /> <br /> ==== '''''&lt;big&gt;[Current] Helical Actuator&lt;/big&gt;''''' ====<br /> [[File:BE-TS (Current) Swing Arms &amp; Actuator (Helical Actuator).png|alt=BE-TS (Current) Swing Arms &amp; Actuator (Helical Actuator)|frameless|544x544px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |N/A<br /> |43052020<br /> |HELICAL ACTUATOR ASSEMBLY<br /> |<br /> |''Includes Items 1 through 17''<br /> |1<br /> |-<br /> |1<br /> |HC0180<br /> |HELICAL ACTUATOR<br /> |80252032<br /> |<br /> |1<br /> |-<br /> |2<br /> |43057046<br /> |ACTUATOR BASE PLATE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43058022<br /> |SPACER-ACTUATOR<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0725<br /> |BOLT-HHCS-3/4-16 X 4-3/4&quot;-GR8<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0066<br /> |NUT-JAM-3/4-16-GR8<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43055013<br /> |SWING ARM-LHS<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0620<br /> |BOLT-HHCS-5/8-11 X 1-1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |8<br /> |HW0013<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |9<br /> |43055014<br /> |SWING ARM-RHS<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1-1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |11<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |12<br /> |43042011<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE, 90 DEG<br /> |80252032<br /> |''† See notes''<br /> |1<br /> |-<br /> |13<br /> |43042012<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE, SHORT<br /> |80252032<br /> |''† See notes''<br /> |1<br /> |-<br /> |14<br /> |H1619<br /> |ADAPTER-90 DEG-#6 JICM X #4 SAEM<br /> |80252032<br /> |<br /> |2<br /> |-<br /> |15<br /> |H0010<br /> |FITTING-H-BULKHEAD-1/4 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |H1504<br /> |ADAPTER-#6 JICM X #4 NPTM<br /> |80252032<br /> |<br /> |1<br /> |-<br /> |17<br /> |H1691<br /> |ADAPTER-45 DEG-#6 JICM X #4 NPTM<br /> |80252032<br /> |''† See notes''<br /> |1<br /> |-<br /> |18<br /> |HW1082<br /> |CLAMP-HOSE<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Hard-Pipes and 45 degree adapter required if replacing discontinued actuator with current Actuator Kit Part # 80252032 required for discontinued actuator replacement.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Swing Arm Stops &amp; Tie Plate&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Swing Arm Stops &amp; Tie Plate (Helical Actuator).png|alt=BE-TS Swing Arm Stops &amp; Tie Plate (Helical Actuator)|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43057050<br /> |TIE PLATE-HELICAL SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0113<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0010<br /> |NUT-JAM-5/8-11<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |43057052<br /> |STOP-POLY-SWING ARM<br /> |<br /> |''† See notes''<br /> |4<br /> |-<br /> |6<br /> |HW0441<br /> |BOLT-FHSCS-3/8-16 X 1-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW0031<br /> |NUT-LOCK-3/8-16, DEFORMED THREAD<br /> |<br /> |''† † See notes''<br /> |4<br /> |-<br /> |8<br /> |44555002<br /> |SWING ARM STOP<br /> |<br /> |''Single compartment use only''<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Replacement Poly Stop design updated from Square to Round. Stop Spacers not required with current, Round-Style Stops.''<br /> |-<br /> | colspan=&quot;6&quot; |''† † Deformed Thread Lock Nut replaces Acorn Nut and Split Lock Washer used previously.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Push/Pull Arm Mounting (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Push-Pull Arm Mounting.png|alt=BE-TS Push-Pull Arm Mounting (Helical Actuator)|frameless|542x542px]]<br /> {| class=&quot;wikitable&quot;<br /> ! rowspan=&quot;2&quot; |ITEM<br /> ! rowspan=&quot;2&quot; |BHS PART NUMBER<br /> ! rowspan=&quot;2&quot; |DESCRIPTION<br /> ! rowspan=&quot;2&quot; |REF. KIT NO.<br /> ! rowspan=&quot;2&quot; |NOTES<br /> ! colspan=&quot;3&quot; |NO. REQ<br /> |-<br /> !BE-24<br /> !BE-36<br /> !BE-42<br /> |-<br /> | rowspan=&quot;2&quot; |1<br /> |41655008<br /> |EXTENSION-ARM<br /> |<br /> |''†BE-36 units only''<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |1<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |43455001<br /> |EXTENSION-ARM<br /> |<br /> |''†BE-42 units only''<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |1<br /> |-<br /> |2<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> | colspan=&quot;2&quot; |12<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |12<br /> | colspan=&quot;2&quot; |24<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> | colspan=&quot;2&quot; |12<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |6<br /> | colspan=&quot;2&quot; |12<br /> |-<br /> ! colspan=&quot;8&quot; |NOTES<br /> |-<br /> | colspan=&quot;8&quot; |''† BE-24 units do not utilize an Arm Extension.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Extractor Arm (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Non-Pivoting Vacuum Cup Arm (Helical Actuator)&lt;/big&gt;''''' ====<br /> [[File:BE-TS Non-Pivoting Vacuum Cup Arm (Helical Actuator).png|alt=BE-TS Non-Pivoting Vacuum Cup Arm (Helical Actuator)|frameless|578x578px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0428<br /> |STUD-VACUUM-3/8-16 X 5&quot;<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |2<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |HW-KIT-2<br /> |<br /> |40<br /> |-<br /> |3<br /> |HW1001<br /> |SPRING-3/8&quot;<br /> |HW-KIT-2<br /> |<br /> |24<br /> |-<br /> |4<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0424<br /> |NUT-JAM-3/8-16<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |6<br /> |P0402<br /> |HOSE BARB-1/4&quot; X #4 MNPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |REF<br /> |43052014<br /> |ADJUSTABLE PUSH-PULL ARM<br /> |<br /> |''Includes Items 7 through 11''<br /> |A/R<br /> |-<br /> |7<br /> |43055018<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |43055019<br /> |VACUUM CUP MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Pivoting Vacuum Cup Arm (Helical Actuator)&lt;/big&gt;''''' ====<br /> [[File:BE-TS Pivoting Vacuum Cup Arm (Helical Actuator).png|alt=BE-TS Pivoting Vacuum Cup Arm (Helical Actuator)|frameless|525x525px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43052014<br /> |ADJUSTABLE PUSH-PULL ARM<br /> |<br /> |''Includes Items 1 through 5''<br /> |A/R<br /> |-<br /> |1<br /> |43055018<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43055019<br /> |VACUUM CUP MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |43055020<br /> |MOUNT-PIVOT-VACUUM CUP<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |PT0470<br /> |BEARING-PIVOT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0525<br /> |BOLT-CARRIAGE-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |9<br /> |HW0524<br /> |BOLT-CARRIAGE-1/2-13 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |11<br /> |HW0008<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |16<br /> |-<br /> |12<br /> |43058009<br /> |PLATE-ROTATION STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |43058003<br /> |SLEEVE-STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |43058010<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |4<br /> |-<br /> |16<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |43037002-2<br /> |SUPPORT-CABLE RESTRAINT<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |21<br /> |P0506<br /> |ELBOW-STR-90 DEG-#4 NPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |22<br /> |P0402<br /> |HOSE BARB-1/4&quot; X #4 MNPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |23<br /> |43057056-2<br /> |BRACKET-HOSE SUPPORT<br /> |<br /> |<br /> |2<br /> |-<br /> |24<br /> |PL0507<br /> |GROMMET-5/8&quot; I.D.<br /> |<br /> |<br /> |2<br /> |-<br /> |25<br /> |P0302<br /> |HOSE-VACUUM-1/4&quot; I.D.<br /> |<br /> |''2 pieces at 48&quot; each''<br /> |96&quot;<br /> |-<br /> |26<br /> |HW0443<br /> |BOLT-HHCS-3/8-16 X 3-1/2&quot;<br /> |HW-KIT-3<br /> |<br /> |8<br /> |-<br /> |27<br /> |HW1001<br /> |SPRING-3/8&quot;<br /> |HW-KIT-3<br /> |<br /> |16<br /> |-<br /> |28<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |HW-KIT-3<br /> |<br /> |32<br /> |-<br /> |29<br /> |HW0424<br /> |NUT-JAM-3/8-16<br /> |HW-KIT-3<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Cup Rotation Stop (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Vacuum Cup Rotation Stop (Helical Actuator).png|alt=BE-TS Vacuum Cup Rotation Stop (Helical Actuator)|frameless|583x583px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |445558001<br /> |PLATE-ROTATION STOP<br /> |<br /> |''† Single compartment units only''<br /> |2<br /> |-<br /> |2<br /> |HW0525<br /> |BOLT-CARRIAGE-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0524<br /> |BOLT-CARRIAGE-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0008<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Components (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Vacuum Components (Helical Actuator).png|alt=BE-TS Vacuum Components (Helical Actuator)|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43058021<br /> |STIFFENER PLATE-HELICAL SWING ARM<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |24<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |5<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |12<br /> |-<br /> |6<br /> |P0005<br /> |PUMP-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |P0207<br /> |VALVE-VACUUM RELEASE<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |P0208<br /> |FILTER-HI FLOW<br /> |<br /> |<br /> |3<br /> |-<br /> |9<br /> |H0011<br /> |NIPPLE-#4 X 2&quot;-BRASS<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |P0502<br /> |TEE-#4 FNPT-BRASS<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |P0506<br /> |ELBOW-STR-90 DEG-#4 NPT-BRASS<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |P0503<br /> |NIPPLE-#4 NPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |P0402<br /> |HOSE BARB-1/4&quot; X #4 MNPT-BRASS<br /> |<br /> |<br /> |6<br /> |-<br /> |14<br /> |P0111<br /> |FILTER-VACUUM-IN-LINE<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0206<br /> |SCREW-RHMS-#10-32 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |43037014-2<br /> |BRACKET-CABLE RESTRAINT<br /> |<br /> |<br /> |1<br /> |-<br /> |17<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |18<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |21<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |22<br /> |E0624<br /> |CONNECTOR-1/2&quot;<br /> |<br /> |''Includes Lock Nut''<br /> |1<br /> |-<br /> |23<br /> |HW0212<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Arm (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Arm (Helical Actuator).png|alt=BE-TS Magnet Arm (Helical Actuator)|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43052014<br /> |ADJUSTABLE PUSH-PULL ARM<br /> |<br /> |''Includes Items 1 through 5''<br /> |A/R<br /> |-<br /> |1<br /> |43055018<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43055019<br /> |VACUUM CUP MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |43055016<br /> |MOUNT-PIVOT-MAGNET<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |PT0470<br /> |BEARING-PIVOT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0525<br /> |BOLT-CARRIAGE-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |9<br /> |HW0524<br /> |BOLT-CARRIAGE-1/2-13 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |11<br /> |HW0008<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |16<br /> |-<br /> |12<br /> |43058009<br /> |PLATE-ROTATION STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |43058003<br /> |SLEEVE-STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |43058010<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |18<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |43037002-2<br /> |SUPPORT-CABLE RESTRAINT<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |21<br /> |E0334-6'<br /> |CORD-5 PIN FEMALE<br /> |<br /> |''With 72&quot; lead''<br /> |2<br /> |-<br /> |22<br /> |E1041<br /> |WIRE LOOM-SPIRAL-3/8&quot;<br /> |<br /> |''2 pieces at 24&quot; each''<br /> |48&quot;<br /> |-<br /> |23<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |2<br /> |-<br /> |24<br /> |43057037<br /> |INSULATOR-BOTTOM<br /> |<br /> |<br /> |2<br /> |-<br /> |25<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |26<br /> |41657008<br /> |SLIDE-MAGNET<br /> |<br /> |<br /> |2<br /> |-<br /> |27<br /> |HW0314<br /> |BOLT-FHSCS-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Assembly (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Assembly (Helical Actuator).png|alt=BE-TS Magnet Assembly (Helical Actuator)|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43032009<br /> |MAGNET ASSEMBLY<br /> |<br /> |''Includes Items 1 through 12''<br /> |A/R<br /> |-<br /> |1<br /> |N/A<br /> |ELECTROMAGNET-95VDC<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |E0314<br /> |SENSOR-PROXIMITY-30MM<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |41657002<br /> |COVER-PROXIMITY SENSOR HOUSING<br /> |<br /> |''Rear''<br /> |2<br /> |-<br /> |4<br /> |HW1065<br /> |SCREW-SHCS-#6-32 X 3/8&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW1066<br /> |WASHER-LOCK-#6<br /> |<br /> |<br /> |8<br /> |-<br /> |6<br /> |E0335<br /> |RECEPTACLE-5 PIN MALE<br /> |<br /> |''With 12&quot; lead''<br /> |2<br /> |-<br /> |7<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |E0376<br /> |INDICATOR LIGHT<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |9<br /> |41657003<br /> |COVER-PROXIMITY SENSOR HOUSING<br /> |80252015<br /> |''Front''<br /> |2<br /> |-<br /> |10<br /> |HW0138<br /> |SCREW-FHSCS-#8-32 X 3/8&quot;<br /> |80252015<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |80252014<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW1002<br /> |SPRING-1/2&quot;<br /> |80252014<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |80252014<br /> |<br /> |8<br /> |-<br /> |14<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |80252014<br /> |<br /> |4<br /> |-<br /> |15<br /> |E0336<br /> |METAL OXIDE VARISTOR<br /> |<br /> |''Not shown''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Extractors built or replacement magnets shipped prior to October 2021 used Multi-Piece Indicator Lights with replaceable bulb and lens and are no longer available. Current Indicator Light is a 1-Piece LED assembly. Replacement of any Multi-Piece component requires replacing entire assembly with current, 1-Piece Indicator Light.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Components (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Components (Helical Actuator).png|alt=BE-TS Magnet Components (Helical Actuator)|frameless|534x534px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43058021<br /> |STIFFENER PLATE-HELICAL SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43057051-2<br /> |STIFFENER-MAGNET-HELICAL SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |4<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |24<br /> |-<br /> |5<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |6<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |12<br /> |-<br /> |7<br /> |PL0307<br /> |INSULATOR-MALE STUD<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0106<br /> |WASHER-FLAT-5/16&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |HW0105<br /> |WASHER-LOCK-5/16&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0004<br /> |NUT-HEX-5/16-18<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |12<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |13<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |14<br /> |E1016<br /> |FUSE HOLDER<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |E0325<br /> |FUSE-7 AMP-250VAC<br /> |<br /> |''FLM-7 or FNM-7''<br /> |1<br /> |-<br /> |16<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |17<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Panel (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Panel (Helical Actuator).png|alt=BE-TS Magnet Panel (Helical Actuator)|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41637001<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41637002<br /> |WIRE WAY-SHORT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |41637003<br /> |WIRE WAY-LONG<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |41637004<br /> |TRACK-MOUNTING-SHORT<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |41637005<br /> |TRACK-MOUNTING-LONG<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> | rowspan=&quot;3&quot; |''Mounting track hardware (Not shown)''<br /> |10<br /> |-<br /> |7<br /> |HW0132<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |10<br /> |-<br /> |8<br /> |HW0133<br /> |NUT-NILN-#8-32<br /> |<br /> |16<br /> |-<br /> |9<br /> |E1020<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |12<br /> |-<br /> |10<br /> |E1040<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |E1330<br /> |END ANCHOR<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |E1009<br /> |RECTIFIER-FULL WAVE BRIDGE<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |HW0135<br /> |SCREW-RHMS-#8-32 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |E1313<br /> |SOCKET-RELAY-8 PIN<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |E0331<br /> |RELAY-DPDT-110VAC<br /> |<br /> |''With Indicator Light''<br /> |2<br /> |-<br /> |16<br /> |HW0139<br /> |SCREW-RHMS-#8-32 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Extended Reach Hydraulics (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== &lt;big&gt;''[Discontinued] Helical Actuator''&lt;/big&gt; ====<br /> [[File:BE-TS (Discontinued) Helical Actuator.png|alt=BE-TS (Discontinued) Helical Actuator|frameless|546x546px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43042009<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |H0010<br /> |FITTING-BULKHEAD-3/4-16 X #4 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |43055017<br /> |ELBOW-BULKHEAD<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> | rowspan=&quot;3&quot; |7<br /> |4-48-0402-0402<br /> |HYD HOSE-1/4&quot; X 48&quot; (BE-24 UNITS)<br /> |<br /> | rowspan=&quot;3&quot; |''Cylinder rod-end hose''<br /> | rowspan=&quot;3&quot; |1<br /> |-<br /> |4-54-0402-0402<br /> |HYD HOSE-1/4&quot; X 54&quot; (BE-36 UNITS)<br /> |<br /> |-<br /> |4-56-0402-0402<br /> |HYD HOSE-1/4&quot; X 56&quot; (BE-42 UNITS)<br /> |<br /> |-<br /> | rowspan=&quot;3&quot; |8<br /> |4-38-0402-0402<br /> |HYD HOSE-1/4&quot; X 38&quot; (BE-24 UNITS)<br /> |<br /> | rowspan=&quot;3&quot; |''Cylinder rod-end hose''<br /> | rowspan=&quot;3&quot; |1<br /> |-<br /> |4-44-0402-0402<br /> |HYD HOSE-1/4&quot; X 44&quot; (BE-36 UNITS)<br /> |<br /> |-<br /> |4-46-0402-0402<br /> |HYD HOSE-1/4&quot; X 46&quot; (BE-42 UNITS)<br /> |<br /> |-<br /> |9<br /> |41257035<br /> |STANDOFF-HOSE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW1093<br /> |CLAMP-CABLE-3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0311<br /> |BOLT-FHSCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> ==== &lt;big&gt;''[Current] Helical Actuator''&lt;/big&gt; ====<br /> [[File:BE-TS (Current) Helical Actuator.png|alt=BE-TS (Current) Helical Actuator|frameless|567x567px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43042013<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |H0010<br /> |FITTING-BULKHEAD-3/4-16 X #4 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |43055021<br /> |ELBOW-BULKHEAD<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> | rowspan=&quot;3&quot; |7<br /> |4-48-0402-0402<br /> |HYD HOSE-1/4&quot; X 48&quot; (BE-24 UNITS)<br /> |<br /> | rowspan=&quot;3&quot; |''Cylinder rod-end hose''<br /> | rowspan=&quot;3&quot; |1<br /> |-<br /> |4-54-0402-0402<br /> |HYD HOSE-1/4&quot; X 54&quot; (BE-36 UNITS)<br /> |<br /> |-<br /> |4-56-0402-0402<br /> |HYD HOSE-1/4&quot; X 56&quot; (BE-42 UNITS)<br /> |<br /> |-<br /> | rowspan=&quot;3&quot; |8<br /> |4-38-0402-0402<br /> |HYD HOSE-1/4&quot; X 38&quot; (BE-24 UNITS)<br /> |<br /> | rowspan=&quot;3&quot; |''Cylinder rod-end hose''<br /> | rowspan=&quot;3&quot; |1<br /> |-<br /> |4-44-0402-0402<br /> |HYD HOSE-1/4&quot; X 44&quot; (BE-36 UNITS)<br /> |<br /> |-<br /> |4-46-0402-0402<br /> |HYD HOSE-1/4&quot; X 46&quot; (BE-42 UNITS)<br /> |<br /> |-<br /> |9<br /> |41257035<br /> |STANDOFF-HOSE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW1093<br /> |CLAMP-CABLE-3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0311<br /> |BOLT-FHSCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Extended Reach (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== &lt;big&gt;'''''Non-Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator)'''''&lt;/big&gt; ====<br /> [[File:BE-TS Non-Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator).png|alt=BE-TS Non-Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator)|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41255005<br /> |ARM-EXTENSION<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41255004<br /> |HOUSING-EXTENDED REACH<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0416<br /> |CYLINDER-2 1/2&quot; X 12&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CYLINDER-REAR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-CYLINDER-ROD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JIC X # 6 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |28<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |28<br /> |-<br /> |15<br /> |41258002<br /> |PLATE-BEARING<br /> |80258001<br /> |''Side''<br /> |2<br /> |-<br /> |16<br /> |41258005<br /> |PLATE-SHIM<br /> |80258001<br /> |''Side''<br /> |2<br /> |-<br /> |17<br /> |41258003<br /> |PLATE-BEARING<br /> |80258001<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |18<br /> |41258004<br /> |PLATE-SHIM<br /> |80258001<br /> |''Upper / lower''<br /> |2<br /> |}<br /> &lt;big&gt;'''''Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator)'''''&lt;/big&gt;<br /> <br /> [[File:BE-TS Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator).png|alt=BE-TS Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator)|frameless|553x553px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055011<br /> |ARM-EXTENSION<br /> |<br /> |''Pivoting cup only''<br /> |1<br /> |-<br /> |2<br /> |43055012<br /> |HOUSING-EXTENDED REACH<br /> |<br /> |''Pivoting cup only''<br /> |1<br /> |-<br /> |3<br /> |HC0415<br /> |CYLINDER-2 1/2&quot; X 8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CYLINDER-REAR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-CYLINDER-ROD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JIC X # 6 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |24<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |24<br /> |-<br /> |15<br /> |43058013<br /> |PLATE-BEARING<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |16<br /> |43058016<br /> |PLATE-SHIM<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |17<br /> |43058014<br /> |PLATE-BEARING<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |18<br /> |43058015<br /> |PLATE-SHIM<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |19<br /> |HW1043<br /> |CLAMP-CYLINDER<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |43058019<br /> |SUPPORT-CABLE-BAND CLAMP<br /> |<br /> |<br /> |2<br /> |-<br /> |21<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |22<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |23<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |24<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Extended Reach (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== &lt;big&gt;'''''[Discontinued] Extended Reach Magnet Arm (Helical Actuator)'''''&lt;/big&gt; ====<br /> [[File:BE-TS (Discontinued) Extended Reach Magnet Arm (Helical Actuator).png|alt=BE-TS (Discontinued) Extended Reach Magnet Arm (Helical Actuator)|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055011<br /> |ARM-EXTENSION<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43055012<br /> |HOUSING-EXTENDED REACH<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0415<br /> |CYLINDER-2 1/2&quot; X 8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CYLINDER-REAR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-CYLINDER-ROD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JIC X # 6 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |24<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |24<br /> |-<br /> |15<br /> |43058013<br /> |PLATE-BEARING<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |16<br /> |43058016<br /> |PLATE-SHIM<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |17<br /> |43058014<br /> |PLATE-BEARING<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |18<br /> |43058015<br /> |PLATE-SHIM<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |19<br /> |HW1043<br /> |CLAMP-CYLINDER<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |43058019<br /> |SUPPORT-CABLE-BAND CLAMP<br /> |<br /> |<br /> |2<br /> |-<br /> |21<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |24<br /> |43057004-2<br /> |SUPPORT-CABLE-MAGNET<br /> |<br /> |<br /> |2<br /> |}<br /> &lt;big&gt;'''''[Current] Extended Reach Magnet Arm (Helical Actuator)'''''&lt;/big&gt;<br /> <br /> [[File:BE-TS (Current) Extended Reach Magnet Arm (Helical Actuator).png|alt=BE-TS (Current) Extended Reach Magnet Arm (Helical Actuator)|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |50055004<br /> |ARM-EXTENSION<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |50055005<br /> |HOUSING-EXTENDED REACH<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0415<br /> |CYLINDER-2 1/2&quot; X 8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CYLINDER-REAR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-CYLINDER-ROD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JIC X # 6 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |20<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |20<br /> |-<br /> |15<br /> |50058009<br /> |PLATE-BEARING<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |16<br /> |50058012<br /> |PLATE-SHIM<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |17<br /> |50058010<br /> |PLATE-BEARING<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |18<br /> |50058011<br /> |PLATE-SHIM<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |19<br /> |HW1043<br /> |CLAMP-CYLINDER<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |43058019<br /> |SUPPORT-CABLE-BAND CLAMP<br /> |<br /> |<br /> |2<br /> |-<br /> |21<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |24<br /> |43057004-2<br /> |SUPPORT-CABLE-MAGNET<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> == &lt;big&gt;Drive and Idler Wheels&lt;/big&gt; ==<br /> <br /> === &lt;big&gt;&lt;u&gt;Drive Wheel Mounting&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Drive Wheel Mounting.png|alt=BE-TS Drive Wheel Mounting|frameless|519x519px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0503<br /> |BOLT-HHCS-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |2<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |''Cylinder Bracket bolt only''<br /> |2<br /> |-<br /> |3<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> === &lt;big&gt;&lt;u&gt;'''Drive Wheel Motors'''&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Drive Wheel Motors.png|alt=BE-TS Drive Wheel Motors|frameless|535x535px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;2&quot; |1<br /> |43822001-6B<br /> |FLOOR DRIVE ASSEMBLY (W/ 200CC MOTOR)<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |43822004-6B<br /> |FLOOR DRIVE ASSEMBLY (W/ 400CC MOTOR)<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |2<br /> |43827004<br /> |PLATE-MOTOR MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0416<br /> |BOLT-SHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |H1612<br /> |ADAPTER-90 DEG-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |N/A<br /> |ROD-THREADED-1/2-13 X 7 3/4&quot;<br /> |<br /> |''†† See notes''<br /> |8<br /> |-<br /> |7<br /> |N/A<br /> |SPACER-DRIVE WHEEL-4.75&quot; LG<br /> |<br /> |''†† See notes''<br /> |8<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |43827006<br /> |SPACER-DRIVE WHEEL-4.125&quot; LG<br /> |<br /> |Must be ordered as a set of 4<br /> |8<br /> |-<br /> |11<br /> |HW0516<br /> |BOLT-HHCS-1/2-13 X 6 1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |12<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> | rowspan=&quot;2&quot; |13<br /> |N/A<br /> |MOTOR-HYDRAULIC-200CC<br /> |<br /> |''††† Keyed Shaft''<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |N/A<br /> |MOTOR-HYDRAULIC-400CC<br /> |<br /> |''††† Keyed Shaft''<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |14<br /> |HW1071<br /> |KEY-WOODRUFF-#808 STD<br /> |<br /> |<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |15<br /> |HC0124-6B<br /> |MOTOR-HYDRAULIC-200CC<br /> |<br /> |''† Spline Shaft''<br /> |2<br /> |-<br /> |HC0126-6B<br /> |MOTOR-HYDRAULIC-400CC<br /> |80322003<br /> |''† Spline Shaft''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† 200CC Motors required for units equipped with Parallel Drive Circuit.''<br /> ''400CC Motors required for units equipped with Series Drive Circuit.''<br /> <br /> See Cross Port Relief section to determine if unit is Parallel or Series equipped and approximate effectivity of each type.<br /> |-<br /> | colspan=&quot;6&quot; |''†† Parts obsolete and no longer available. Must replace with Items 10 &amp; 11.''<br /> |-<br /> | colspan=&quot;6&quot; |''††† Parts obsolete and no longer available. Must replace with Spline Drive Conversion Kit.''<br /> |}<br /> <br /> === &lt;big&gt;&lt;u&gt;'''Drive Wheel Bearings'''&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Drive Wheel Bearings.png|alt=BE-TS Drive Wheel Bearings|frameless|537x537px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43825001<br /> |FRAME-FLOOR DRIVE<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |C0510-1<br /> |WHEEL-10&quot; X 5&quot;-POLY<br /> |80322001<br /> |<br /> |2<br /> |-<br /> |3<br /> |43822003<br /> |SHAFT-WHEEL (W/ COUPLING BODY)<br /> |<br /> |''Available in multiple kits''<br /> |2<br /> |-<br /> |4<br /> |43897004<br /> |KEY-3/8&quot; X 4 3/4&quot;<br /> |80322001<br /> |<br /> |2<br /> |-<br /> |5<br /> |PT0430<br /> |FLANGE BEARING-4 BOLT-1 1/2&quot;<br /> |80322001<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |7<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |16<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |9<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |16<br /> |-<br /> |10<br /> |PT0321<br /> |CHAIN-COUPLING-#50<br /> |<br /> |''Includes connecting pin''<br /> |2<br /> |-<br /> |11<br /> |N/A<br /> |COUPLING BODY-TAPER BORE-#50<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |12<br /> |N/A<br /> |BUSHING-TAPER LOCK-1&quot;<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |13<br /> |HW0323<br /> |BOLT-HHCS-5/16-18 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |14<br /> |PT0330<br /> |COUPLING BODY-#50-SPLINE BORE<br /> |80322003<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW1110<br /> |RETAINING RING-1 1/2&quot;-HEAVY DUTY<br /> |<br /> |''†† Available in multiple kits''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Parts obsolete and no longer available. Spline Drive Conversion Kit required. Reuse of bushing after disassembly not recommended.'' <br /> |-<br /> | colspan=&quot;6&quot; |''† † Retaining Rings used on units shipped after 7/01/12. Units shipped from 7/01/13 are equipped with (2) Retaining Rings per shaft - (1) on each side of the wheel. Units shipped after 11/01/13 are equipped with only (1) Snap Rings as shown. Second Snap Ring is no longer used or required.''<br /> |-<br /> | colspan=&quot;6&quot; |''NOTE: Effectivity dates refer to dates new extractor units are shipped from the factory. Replacement part effectivity &lt;u&gt;'''may'''&lt;/u&gt; differ due to factory inventory levels at time of parts order. Consult factory if unsure of parts needed.''<br /> |}<br /> <br /> === &lt;big&gt;&lt;u&gt;'''Drive Wheel Assembly'''&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Drive Wheel Assembly.png|alt=BE-TS Drive Wheel Assembly|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43822005<br /> |RADIAL PISTON DRIVE WHEEL ASSEMBLY<br /> |<br /> |''Includes Items 1 through 6''<br /> |2<br /> |-<br /> |1<br /> |43825003<br /> |RADIAL PISTON DRIVE WHEEL MOUNT<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0160-1<br /> |400CC RADIAL PISTON MOTOR<br /> |<br /> |''Includes nuts &amp; studs''<br /> |1<br /> |-<br /> |REF<br /> |HC0160-STUD<br /> |STUD-M14-1.5 X 46MM<br /> |<br /> |''Replacement motor stud''<br /> |A/R<br /> |-<br /> |REF<br /> |HC0160-NUT<br /> |NUT-FLANGED HEX-M14-1.5<br /> |<br /> |''Replacement motor nut''<br /> |A/R<br /> |-<br /> |3<br /> |C0511<br /> |WHEEL-POLY-10 X 5&quot;-FLANGE MOUNT<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |5<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |6<br /> |-<br /> |7<br /> |H1612<br /> |ADAPTER-H-90 DEG-#10 SAEM X #8 JICM<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |H1539<br /> |ADAPTER-#8 JIC X #6 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1586<br /> |ADAPTER-90 DEG-#8 JICSW X #6 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |H0801<br /> |TEE-H-#6 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H1501<br /> |ADAPTER-#8 JIC X #6 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |H0200<br /> |REDUCER-#6 NPT X #4 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |H0206<br /> |PLUG-#4 NPT<br /> |<br /> |''† Left Drive Wheel only''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Plug used on Left Drive Wheel Assembly only. Hose from Left Drive Wheel Assembly is connected to tee on Right Drive Wheel Assembly.'' <br /> |}<br /> <br /> === &lt;big&gt;&lt;u&gt;'''Idler Casters'''&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Idler Casters.png|alt=BE-TS Idler Casters|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |C0500-1<br /> |CASTER-RIGID-10&quot; X 5&quot;-POLY<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |3<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |<br /> |''For Cylinder Bracket position'' <br /> |2<br /> |-<br /> |4<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |16<br /> |-<br /> |5<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |6<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> == &lt;big&gt;Electrical&lt;/big&gt; ==<br /> <br /> === '''&lt;u&gt;&lt;big&gt;AC Power Stanchion&lt;/big&gt;&lt;/u&gt;''' ===<br /> <br /> ==== '''&lt;big&gt;''Aero-Motive Energy Rail''&lt;/big&gt;''' ====<br /> [[File:BE-TS Aero-Motive Energy Rail.png|alt=BE-TS Aero-Motive Energy Rail|frameless|536x536px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43835001<br /> |STANCHION-POWER<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0511<br /> |BOLT-HHCS-1/2-13 X 3 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |46837014-2<br /> |TOW ARM-COLLECTOR TROLLEY<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |46838015<br /> |SPACER BLOCK-TOW ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW1030<br /> |U-BOLT-3/8-16 X 2&quot; X 5&quot;-SQUARE BEND<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .625&quot; to .750&quot;''<br /> |1<br /> |-<br /> |13<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |HW1051<br /> |EYE BOLT-3/8-16 X 5 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0126<br /> |WASHER-FLAT-3/8&quot;-FENDER<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |BD0010<br /> |TROLLEY-ENERGY RAIL<br /> |<br /> | rowspan=&quot;2&quot; |''Aero-Motive Rail only''<br /> <br /> ''(orange housing color)''<br /> |1<br /> |-<br /> |19<br /> |BD0100<br /> |BRUSH-TROLLEY<br /> |<br /> |4<br /> |}<br /> <br /> ==== '''&lt;big&gt;''Vahle Energy Rail''&lt;/big&gt;''' ====<br /> [[File:BE-TS Vahle Energy Rail.png|alt=BE-TS Vahle Energy Rail|frameless|535x535px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1A<br /> |BD0031<br /> |TROLLEY-ENERGY RAIL, KSL<br /> |<br /> | rowspan=&quot;3&quot; |''† Vahle KSL Rail only''<br /> <br /> ''(green housing color)''<br /> |1<br /> |-<br /> |2A<br /> |BD0040<br /> |BRUSH-PHASE, KSL<br /> |<br /> |3<br /> |-<br /> |3A<br /> |BD0041<br /> |BRUSH-GROUND, KSL<br /> |<br /> |1<br /> |-<br /> |1B<br /> |BD0231<br /> |TROLLEY-ENERGY RAIL, KBH<br /> |<br /> | rowspan=&quot;3&quot; |''† Vahle KBH Rail only''<br /> <br /> ''(gray housing color)''<br /> <br /> ''(Nots shown)''<br /> |1<br /> |-<br /> |2B<br /> |BD0240<br /> |BRUSH-PHASE, KBH<br /> |<br /> |3<br /> |-<br /> |3B<br /> |BD0241<br /> |BRUSH-GROUND, KBH<br /> |<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |4<br /> |BD0030<br /> |TOW ARM-COLLECTOR TROLLEY, KSL<br /> |<br /> |''† Vahle KSL Rail only''<br /> <br /> ''(green housing color)''<br /> |1<br /> |-<br /> |BD0230<br /> |TOW ARM-COLLECTOR TROLLEY, KBH<br /> |<br /> |''† Vahle KBH Rail only''<br /> <br /> ''(gray housing color)''<br /> |1<br /> |-<br /> |5<br /> |46838015<br /> |SPACER-BLOCK-TOW ARM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |6<br /> |41237083-2<br /> |BRACKET-TOW ARM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |7<br /> |HW1054<br /> |U-BOLT-5/16-18 X 2&quot; X 5&quot;-SQUARE BEND<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW0323<br /> |BOLT-HHCS-5/16-18 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0106<br /> |WASHER-FLAT-5/16&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0150<br /> |WASHER-FLAT-5/16&quot;-FENDER<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0105<br /> |WASHER-LOCK-5/16&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0004<br /> |NUT-HEX-5/16-18<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Verify Energy Rail type (KSL OR KBH) by the color of the energy rail housing.'' <br /> |-<br /> | colspan=&quot;6&quot; |''†† Not all units equipped with Tow Arm Bracket. Location of Spacer Block and/or Tow Arm Bracket may vary from configuration shown.'' <br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Control Panel&lt;/big&gt;&lt;/u&gt;''' ===<br /> '''&lt;big&gt;''[Discontinued] Control Panel for Units with 10 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS (Discontinued) Control Panel for Units with 10HP.png|alt=BE-TS (Discontinued) Control Panel for Units with 10HP|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-CONTROL PANEL-16&quot; X 14&quot; X 6&quot;<br /> |<br /> |CONSULT FACTORY<br /> |1<br /> |-<br /> |2<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |Grip size .250&quot; to.375&quot;<br /> |1<br /> |-<br /> |6<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |Grip size .625&quot; to .750&quot;<br /> |2<br /> |-<br /> |7<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |Grip size .500&quot; to .625&quot;<br /> |2<br /> |-<br /> |8<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |''Not shown''<br /> |1<br /> |-<br /> |9<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |''Not shown''<br /> |4<br /> |}<br /> [[File:BE-TS (Discontinued) Control Panel for Units with 10HP Detail.png|alt=BE-TS (Discontinued) Control Panel for Units with 10HP Detail|frameless|556x556px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0640<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |BLANK PANEL WITHOUT HOLES<br /> |1<br /> |-<br /> |2<br /> |E0120<br /> |MAGNETIC STARTER-NEMA 1 3/4&quot;<br /> |<br /> |WITH OVERLOAD<br /> |1<br /> |-<br /> |3<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |<br /> |17<br /> |-<br /> |4<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |<br /> |17<br /> |-<br /> |5<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |17<br /> |-<br /> |6<br /> |E0207-1<br /> |TRANSFORMER<br /> |<br /> |480VAC TO 120VAC, 0.75 Kva<br /> |1<br /> |-<br /> |7<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |HW0003<br /> |NUT-NILN-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |E1023<br /> |WIREWAY<br /> |<br /> |SOLD BY LENGTH<br /> |A/R<br /> |-<br /> |11<br /> |E1024<br /> |MOUNTING TRACK<br /> |<br /> |SOLD BY LENGTH<br /> |A/R<br /> |-<br /> |12<br /> |E1020<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |16<br /> |-<br /> |13<br /> |E1040<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |E1330<br /> |END ANCHOR<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |E0341<br /> |GROUND LUG<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |E0902<br /> |FUSE-6A<br /> |<br /> |FLM-6<br /> |1<br /> |}<br /> <br /> ==== '''&lt;big&gt;''[Current] Control Panel for Units with 20 HP Power Unit''&lt;/big&gt;''' ====<br /> [[File:BE-TS (Current) Control Panel for Units with 20HP.png|alt=BE-TS (Current) Control Panel for Units with 20HP|frameless|601x601px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-24&quot; X 16&quot; X 6&quot;<br /> |<br /> |CONSULT FACTORY<br /> |1<br /> |-<br /> |2<br /> |E0123-1<br /> |HANDLE-DISCONNECT<br /> |<br /> |INCL. MOUNTING SCREWS<br /> |1<br /> |-<br /> |3<br /> |E0662<br /> |RESTRAINT-3/4&quot;-LIQUID TIGHT<br /> |<br /> |INCL. LOCKNUT<br /> |1<br /> |-<br /> |4<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |GRIP SIZE .500&quot; TO .625&quot;<br /> |2<br /> |-<br /> |5<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |GRIP SIZE .625&quot; TO .750&quot;<br /> |1<br /> |-<br /> |6<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |7<br /> |E0661<br /> |RESTRAINT-3/4&quot;-90 DEG-LIQUID TIGHT<br /> |<br /> |INCL. LOCKNUT<br /> |1<br /> |-<br /> |8<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |GRIP SIZE .250&quot; TO .375&quot;<br /> |1<br /> |-<br /> |9<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |GRIP SIZE .450&quot; TO .560&quot;<br /> |2<br /> |-<br /> |10<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |11<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |}<br /> [[File:BE-TS (Current) Control Panel for Units with 20HP Details.png|alt=BE-TS (Current) Control Panel for Units with 20HP Details|frameless|645x645px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |YE0506<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |''Blank panel without holes''<br /> |1<br /> |-<br /> |2<br /> |YE0205-1<br /> |SWITCH-DISCONNECT-80A<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43036007<br /> |SHAFT-DISCONNECT<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |YE0409<br /> |FUSE HOLDER-SINGLE POLE<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |E0914<br /> |FUSE-10A<br /> |<br /> |''FLM-10''<br /> |1<br /> |-<br /> |6<br /> |E0902<br /> |FUSE-6A<br /> |<br /> |''FLM-6''<br /> |1<br /> |-<br /> |7<br /> |E0903<br /> |FUSE-12A<br /> |<br /> |''FLM-12''<br /> |1<br /> |-<br /> |8<br /> |YE0402<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |17<br /> |-<br /> |9<br /> |YE0405<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |YE0406<br /> |END ANCHOR<br /> |<br /> |<br /> |6<br /> |-<br /> |11<br /> |E0136<br /> |FUSE HOLDER-3 POLE<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |YE0901<br /> |FUSE-40A<br /> |<br /> |JTD-40-ID<br /> |3<br /> |-<br /> |13<br /> |E1013<br /> |BASE-RELAY<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |E1012<br /> |RELAY-11 PIN<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |E0137<br /> |FUSE HOLDER-2 POLE<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |YE0902<br /> |FUSE-10A<br /> |<br /> |''KLDR-10''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |17<br /> |N/A<br /> |CONTACTOR, &quot;A40&quot; SERIES<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |E0132-1<br /> |CONTACTOR, &quot;AF38&quot; SERIES<br /> |80332009<br /> |<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |18<br /> |N/A<br /> |OVERLOAD, &quot;TA&quot; SERIES<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |E0131-1<br /> |OVERLOAD, &quot;TF&quot; SERIES<br /> |80332009<br /> |<br /> |1<br /> |-<br /> |19<br /> |E1023<br /> |WIREWAY<br /> |<br /> |''Sold by length''<br /> |A/R<br /> |-<br /> |20<br /> |E0908<br /> |MOUNTING RAIL<br /> |<br /> |''Sold by length''<br /> |A/R<br /> |-<br /> |21<br /> |E1070<br /> |GROUND BAR-4 POSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |22<br /> |E1071<br /> |GROUND BAR-7 POSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |23<br /> |HW1061<br /> |SCREW-RHMS-#8-32 X 1&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |24<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> | rowspan=&quot;3&quot; |''Track and Wireway mounting hardware (Not shown)''<br /> |14<br /> |-<br /> |25<br /> |HW0133<br /> |WASHER-FLAT-#8<br /> |<br /> |14<br /> |-<br /> |26<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |17<br /> |-<br /> |27<br /> |E0139<br /> |AUXILIARY CONTACT BLOCK<br /> |80332009<br /> |''†† See notes''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† &quot;A40&quot; Series Contactor and &quot;TA&quot; Series Overload no longer available as of mid-March 2022. Components must be replaced with current Overload &amp; Relay Kit 80332009.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Auxiliary contact Block required for units equipped with &quot;AF38&quot; Series Contactor &amp; &quot;TF&quot; Series Overload.''<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Transformer&lt;/big&gt;&lt;/u&gt;''' ===<br /> '''&lt;big&gt;''Transformer for Units with 20 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS Transformer for Units with 20HP.png|alt=BE-TS Transformer for Units with 20HP|frameless|554x554px]]<br /> <br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0220<br /> |TRANSFORMER<br /> |<br /> |''480VAC to 120VAC, 3kVA''<br /> |1<br /> |-<br /> |2<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |3<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |7<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |3<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;Operator Console&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Operator Console Electrical.png|alt=BE-TS Operator Console Electrical|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0327<br /> |KEYED ACTUATOR ASSEMBLY<br /> |<br /> |''Includes 2 Keys &amp; Contact Block'' <br /> |1<br /> |-<br /> |2<br /> |E0351<br /> |KEY-REPLACEMENT<br /> |<br /> |''Set of 2 Keys''<br /> |A/R<br /> |-<br /> |3<br /> |E0309-1<br /> |HOUR METER<br /> |<br /> |''† Includes mounting hardware''<br /> |1<br /> |-<br /> |4<br /> |N/A<br /> |SWITCH-SELECTOR-3 POSITION<br /> |<br /> |''ON-OFF-ON, †† See notes''<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |5<br /> |N/A<br /> |LEGEND PLATE-VACUUM<br /> |<br /> |''††† See notes''<br /> |1<br /> |-<br /> |N/A<br /> |LEGEND PLATE-MAGNET<br /> |<br /> |''††† See notes''<br /> |1<br /> |-<br /> |6<br /> |N/A<br /> |CONTACT BLOCK-N/O<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |7<br /> |N/A<br /> |CONTACT BLOCK-N/C<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |8<br /> |E1083<br /> |SWITCH-SELECTOR-3 POSITION<br /> |80232001<br /> |''OFF-ON-OFF''<br /> |1<br /> |-<br /> |9<br /> |E1080<br /> |CONTACT BLOCK-N/O &amp; N/C<br /> |80232001<br /> |<br /> |2<br /> |-<br /> |10<br /> |YE0311<br /> |SWITCH-EMERGENCY STOP<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |YE0407<br /> |LEGEND PLATE-EMERGENCY STOP<br /> |<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Current Hour Meter is 3-Bolt version. Replacement of 4-Bolt version will require new mounting holes to be drilled in dashboard.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Parts no longer available. Must order new Selector Switch Kit 80232001''<br /> |-<br /> | colspan=&quot;6&quot; |''††† Parts no longer available. See Labels &amp; Placards section for current Placards''<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;Foot Switch&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Foot Switch Electrical.png|alt=BE-TS Foot Switch Electrical|frameless|701x701px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0301-1<br /> |SWITCH-FOOT OPERATED<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .500&quot; to .625&quot;''<br /> |1<br /> |-<br /> |3<br /> |E0515<br /> |CORD-14-3-SO/SOW<br /> |<br /> |<br /> |9'<br /> |-<br /> |4<br /> |HC0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |''If equipped''<br /> |2<br /> |-<br /> |5<br /> |HC0103<br /> |WASHER-1/4&quot;-LOCK<br /> |<br /> |''If equipped''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Open-Style Switch is a direct replacement for discontinued, Covered-Style Switch.'' <br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''Gate Switch'''&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Gate Switch Electrical.png|alt=BE-TS Gate Switch Electrical|frameless|613x613px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0312<br /> |SWITCH-PUSH BUTTON<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43017041<br /> |MOUNT-GATE SWITCH<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW1077<br /> |SCREW-RHMS-#10-24 X 5/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0307<br /> |BOLT-SHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |PL0502<br /> |GROMMET-3/8&quot; I.D.<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |YE0305<br /> |SWITCH-ROLLER<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |SS0303<br /> |WASHER-FLAT-#8<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |SS0111<br /> |SCREW-SHCS-#8-32 X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |SS0203<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''Proximity Switch'''&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Proximity Switch Electrical.png|alt=BE-TS Proximity Switch Electrical|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0314<br /> |SENSOR-PROXIMITY-30MM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43017027-2<br /> |BRACKET-PROXIMITY SENSOR<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |6<br /> |43017037-2<br /> |ANGLE-PROXIMITY SENSOR TARGET<br /> |<br /> |''Rotary Actuator units'' <br /> |1<br /> |-<br /> |43017084-2<br /> |ANGLE-PROXIMITY SENSOR TARGET<br /> |<br /> |''Helical Actuator units'' <br /> |1<br /> |-<br /> |7<br /> |HW0341<br /> |BOLT-FHSCS-1/4-20 X 5/8&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''120V Receptacle'''&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Proximity Switch Electrical.png|alt=BE-TS Proximity Switch Electrical|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |3<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0650<br /> |RECEPTACLE-DUPLEX<br /> |<br /> |''† 20A''<br /> |1<br /> |-<br /> |5<br /> |E0651<br /> |COVER-RECEPTACLE-DUPLEX<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0655<br /> |RECEPTACLE-GFCI<br /> |<br /> |''20A''<br /> |1<br /> |-<br /> |7<br /> |E0656<br /> |COVER-RECEPTACLE-GFCI<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |E0654<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |E0657<br /> |COVER-RECEPTACLE-DUPLEX/GFCI<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |''Mounting hardware (Not shown)''<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† If Duplex Receptacle has Split Feed (1 set of black &amp; white wires for each plug), the Break-Off Fin must be removed prior to installation.'' <br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''Console Enclosure'''&lt;/big&gt;&lt;/u&gt; ===<br /> <br /> ==== '''&lt;big&gt;''[Discontinued] Operator Console Enclosure for Units with 10 HP Power Unit''&lt;/big&gt;''' ====<br /> [[File:BE-TS (Discontinued) Operator Console Enclosure for Units with 10 HP Power Unit.png|alt=BE-TS (Discontinued) Operator Console Enclosure for Units with 10 HP Power Unit|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-6&quot; X 6&quot; X 4 &quot;<br /> |<br /> |''Consult factory''<br /> |1<br /> |-<br /> |2<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |3<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |4<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |5<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |8<br /> |43817087-2<br /> |BRACKET-MOUNTING-ENCLOSURE<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> | rowspan=&quot;4&quot; |''Mounting bracket hardware (Not shown)''<br /> |2<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |2<br /> |}<br /> '''&lt;big&gt;''[Discontinued] Operator Console Enclosure Panel for Units with 10 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS (Discontinued) Operator Console Enclosure Panel for Units with 10 HP Power Unit.png|alt=BE-TS (Discontinued) Operator Console Enclosure Panel for Units with 10 HP Power Unit|frameless|566x566px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0639<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |''Without holes''<br /> |1<br /> |-<br /> |2<br /> |E1024<br /> |TRACK-TERMINAL BLOCK<br /> |<br /> |''4 7/8&quot; LG''<br /> |1<br /> |-<br /> |3<br /> |E1020<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |9<br /> |-<br /> |4<br /> |E1330<br /> |END ANCHOR<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |E1040<br /> |END BARRIER<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0341<br /> |GROUND LUG<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |''2 for track mounting''<br /> |3<br /> |-<br /> |8<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |''2 for track mounting''<br /> |3<br /> |-<br /> |9<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |''2 for track mounting''<br /> |3<br /> |}<br /> '''&lt;big&gt;''[Current] Operator Console Enclosure for Units with 20 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS (Current) Operator Console Enclosure for Units with 20 HP Power Unit.png|alt=BE-TS (Current) Operator Console Enclosure for Units with 20 HP Power Unit|frameless|549x549px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-8&quot; X 8&quot; X 4&quot;<br /> |<br /> |''Consult factory''<br /> |1<br /> |-<br /> |2<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |3<br /> |-<br /> |3<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .625&quot; to .750&quot;''<br /> |1<br /> |-<br /> |4<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''† Grip size .450&quot; to .560&quot;''<br /> |4<br /> |-<br /> |5<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''†'' ''Grip size .250&quot; to .375&quot;''<br /> |4<br /> |-<br /> |6<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |11<br /> |-<br /> |7<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |E1349<br /> |SEAL-KNOCKOUT-1/2&quot;<br /> |<br /> |''† See notes''<br /> |A/R<br /> |-<br /> |9<br /> |43037003-2<br /> |BRACKET-MOUNTING-ENCLOSURE<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> | rowspan=&quot;4&quot; |''Mounting bracket hardware (Not shown)''<br /> |2<br /> |-<br /> |12<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |2<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Restraints sold for machines equipped with all available options. Machines built without certain options will have Knockout Seals (Item #8) installed in place of restraints.''<br /> |}<br /> '''&lt;big&gt;''[Current] Operator Console Enclosure Panel for Units with 20 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS (Current) Operator Console Enclosure Panel for Units with 20 HP Power Unit.png|alt=BE-TS (Current) Operator Console Enclosure Panel for Units with 20 HP Power Unit|frameless|527x527px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0135<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |''Blank panel without holes''<br /> |1<br /> |-<br /> |2<br /> |E0908<br /> |MOUNTING RAIL<br /> |<br /> |''Sold by length''<br /> |A/R<br /> |-<br /> |3<br /> |YE0402<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |14<br /> |-<br /> |4<br /> |YE0405<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |YE0406<br /> |END ANCHOR<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |E1074<br /> |JUMPER-2 POLE<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |E0130<br /> |GROUND BAR-7 POSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW1061<br /> |SCREW-RHMS-#8-32 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> | rowspan=&quot;3&quot; |''Track and Wireway mounting hardware (Not shown)''<br /> |2<br /> |-<br /> |10<br /> |HW0133<br /> |WASHER-FLAT-#8<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |4<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''Junction Box'''&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Junction Box.png|alt=BE-TS Junction Box|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |2<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |3<br /> |-<br /> |3<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .500&quot; to .625&quot;''<br /> |4<br /> |-<br /> |4<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .625&quot; to .750&quot;''<br /> |2<br /> |-<br /> |5<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Top Module Junction Box&lt;/big&gt;''''' ====<br /> [[File:BE-TS Junction Box.png|alt=BE-TS Junction Box|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1329<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0662<br /> |RESTRAINT-3/4&quot;-LIQUID TIGHT<br /> |<br /> |''Includes Locknut'' <br /> |1<br /> |-<br /> |3<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .625&quot; to .750&quot;''<br /> |1<br /> |-<br /> |4<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Wiring Diagrams&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;BE-TS with 10 HP Motor Wiring Diagram&lt;/big&gt;''''' ====<br /> [[File:BE-TS Wiring Diagram-10HP Motor.png|alt=BE-TS Wiring Diagram-10HP Motor|frameless|800x800px]]<br /> <br /> ==== '''''&lt;big&gt;BE-TS with Magnet and 10 HP Motor Wiring Diagram&lt;/big&gt;''''' ====<br /> [[File:BE-TS with Magnet and 10HP Motor Wiring Diagram.png|alt=BE-TS with Magnet and 10HP Motor Wiring Diagram|frameless|800x800px]]<br /> <br /> ==== '''''&lt;big&gt;BE-TS with Magnet and 20 HP Motor Wiring Diagram&lt;/big&gt;''''' ====<br /> [[File:BE-TS Magnet Wiring Diagram-20HP Motor.png|alt=BE-TS Magnet Wiring Diagram-20HP Motor|frameless|800x800px]]<br /> <br /> [[File:BE-TS Magnet Wiring Diagram-20HP Motor-02.png|alt=BE-TS Magnet Wiring Diagram-20HP Motor-02|frameless|800x800px]]<br /> <br /> [[File:BE-TS Magnet Wiring Diagram-20HP Motor-03.png|alt=BE-TS Magnet Wiring Diagram-20HP Motor-03|frameless|800x800px]]<br /> <br /> [[File:BE-TS Magnet Wiring Diagram-20HP Motor-04.png|alt=BE-TS Magnet Wiring Diagram-20HP Motor-04|frameless|800x800px]]<br /> <br /> == &lt;big&gt;Hydraulics&lt;/big&gt; ==<br /> <br /> === '''&lt;big&gt;&lt;u&gt;[Discontinued] 10 HP Power Unit&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:(Discontinued) BE-TS Power Unit (10HP).png|alt=(Discontinued) BE-TS Power Unit (10HP)|frameless|553x553px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0011<br /> |MOTOR-ELECTRIC-10HP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0326<br /> |ADAPTER-PUMP TO MOTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0325<br /> |PUMP-VANE-16 GPM<br /> |<br /> |''Variable displacement''<br /> |1<br /> |-<br /> |4<br /> |HC0327<br /> |COUPLING BODY-1 3/8&quot;<br /> |<br /> |''Motor end''<br /> |1<br /> |-<br /> |5<br /> |HC0329<br /> |SPIDER-COUPLING INSERT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HC0328<br /> |COUPLING BODY-7/8&quot;<br /> |<br /> |''Pump end''<br /> |1<br /> |-<br /> |7<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1 1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H1549<br /> |ADAPTER-#20 JICM X #24 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |H1595<br /> |ADAPTER-90 DEG-#20 JICM X #20 JICSW<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |H1609<br /> |ADAPTER-90 DEG-#12 JICM X #16 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |H1522<br /> |ADAPTER-#12 JICSW X #12 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |HC0260<br /> |VALVE-MAIN SYSTEM RELIEF<br /> |<br /> |<br /> |1<br /> |-<br /> |15a<br /> |43846003<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''†† For Item 15 (Not shown)''<br /> |A/R<br /> |-<br /> |16<br /> |HC0318<br /> |GAUGE-PRESSURE<br /> |<br /> |<br /> |1<br /> |-<br /> |17<br /> |H0206<br /> |PLUG-#4 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |H1108<br /> |ADAPTER-#10 JICM X #12 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |H1522<br /> |ADAPTER-#12 JICSW X #12 SAEM<br /> |<br /> |''† See note''<br /> |1<br /> |-<br /> |20<br /> |H1542<br /> |ADAPTER-#12 JICM X #12 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |21<br /> |HC0280<br /> |VALVE-CHECK<br /> |<br /> |''† See note''<br /> |1<br /> |-<br /> |22<br /> |H1542<br /> |ADAPTER-#12 JICM X #12 SAEM<br /> |<br /> |''† See note''<br /> |1<br /> |-<br /> |23<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .500&quot; to .625&quot;''<br /> |1<br /> |-<br /> |23a<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |''For Item 23 (Not shown)''<br /> |1<br /> |-<br /> |24<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |25<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |26<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |27<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Parts noted used on units built after April 2001.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Cartridges are for replacement only.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;[Discontinued] 30 Gallon Reservoir&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:(Discontinued) BE-TS 30 Gallon Reservoir.png|alt=(Discontinued) BE-TS 30 Gallon Reservoir|frameless|542x542px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43842001<br /> |RESERVOIR-VERTICAL-30 GAL<br /> |<br /> |''Includes Items 1 through 8''<br /> |1<br /> |-<br /> |1<br /> |HC0542<br /> |GASKET-CHANNEL<br /> |<br /> |''Sold by length''<br /> |7'<br /> |-<br /> |2<br /> |HC0340<br /> |GAUGE-SIGHT<br /> |<br /> |''with Thermometer''<br /> |1<br /> |-<br /> |3<br /> |HC0306<br /> |STRAINER-SUCTION<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HC0308<br /> |FILLER/BREATHER ASSEMBLY<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0209<br /> |SCREW-RHMS-10-32 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |BI0110<br /> |ELBOW-STR-90 DEG-#16 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |8<br /> |H0208<br /> |PLUG-#12 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1590<br /> |ADAPTER-90 DEG-#16 JICM X #16 FNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |BI0102<br /> |ELBOW-#12 FNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |BI0020<br /> |NIPPLE-#12 NPT X 3&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |BI0301<br /> |TEE-#12 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |H1502<br /> |ADAPTER-#8 JICM X #12 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |BI0002<br /> |NIPPLE-CLOSE-#12 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HC0307<br /> |RETURN LINE FILTER ASSEMBLY<br /> |<br /> |''Housing and Filter''<br /> |1<br /> |-<br /> |16<br /> |HC0317<br /> |FILTER-RETURN LINE<br /> |<br /> |''Replacement filter''<br /> |1<br /> |-<br /> |17<br /> |H1509<br /> |ADAPTER-#10 JICM X #12 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> | rowspan=&quot;4&quot; |''Mounting hardware''<br /> <br /> ''(Not shown)''<br /> |4<br /> |-<br /> |19<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |8<br /> |-<br /> |20<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |4<br /> |-<br /> |21<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;[Current] Power Unit (20 HP)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:(Current) BE-TS 30 Power Unit (20 HP).png|alt=(Current) BE-TS 30 Power Unit (20 HP)|frameless|531x531px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0040<br /> |MOTOR-ELECTRIC-20 HP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0357<br /> |ADAPTER-PUMP TO MOTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0356<br /> |PUMP-PISTON-71CC<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HC0358-M<br /> |COUPLING BODY-M300-1 5/8&quot; BORE<br /> |<br /> |''MOTOR SIDE''<br /> |1<br /> |-<br /> |5<br /> |HC0358-I<br /> |SPIDER-COUPLING INSERT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HC0358-P<br /> |COUPLING BODY-M300-1 1/4&quot; BORE<br /> |<br /> |''PUMP SIDE''<br /> |1<br /> |-<br /> |7<br /> |HW0602<br /> |BOLT-HHCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0113<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |H1604<br /> |ADAPTER-90 DEG-#12 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HC0363<br /> |ADAPTER-FLANGE-#32 NPT<br /> |<br /> |''Includes O-ring''<br /> |1<br /> |-<br /> |11<br /> |HC0240<br /> |BLOCK-CHECK VALVE<br /> |<br /> |''Includes Cartridge &amp; O-ring''<br /> |1<br /> |-<br /> |12<br /> |N/A<br /> |CARTRIDGE-CHECK VALVE<br /> |<br /> |''† Replacement cartridge''<br /> |A/R<br /> |-<br /> |13<br /> |H0300<br /> |ELBOW-STR-90 DEG-#4 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |HC0318<br /> |GAUGE-PRESSURE<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |HE0704<br /> |ADAPTER-SPLIT FLANGE-1&quot;<br /> |<br /> |''2-Piece adapter with O-ring''<br /> |1<br /> |-<br /> |16<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |H0211<br /> |ADAPTER-#24 NPT X #12<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |E0661<br /> |RESTRAINT-3/4&quot;-90 DEG-LIQUID TIGHT<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |HW0513<br /> |BOLT-HHCS-1/2-13 X 2 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |20<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |21<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTE<br /> |-<br /> | colspan=&quot;6&quot; |''† Consult factory''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;[Current] 45 Gallon Reservoir&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:(Current) BE-TS 45 Gallon Reservoir.png|alt=(Current) BE-TS 45 Gallon Reservoir|frameless|547x547px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43842010<br /> |45 GAL RESERVOIR ASSEMBLY<br /> |<br /> |''Includes Items 1 through 7''<br /> |A/R<br /> |-<br /> |1<br /> |43848005<br /> |PLATE-COVER<br /> |<br /> |''† See note''<br /> |1<br /> |-<br /> |2<br /> |HC0308<br /> |FILLER/BREATHER ASSEMBLY<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0209<br /> |SCREW-RHMS-10-32 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |4<br /> |HC0340<br /> |GAUGE-SIGHT<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H0208<br /> |PLUG-#12 NPT<br /> |<br /> |''Non-IIoT equipped units only''<br /> |1<br /> |-<br /> |6<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |7<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |8<br /> |HC0361<br /> |HOUSING-FILTER<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HC0354<br /> |CARTRIDGE-FILTER<br /> |<br /> |''10 Micron filtration''<br /> |1<br /> |-<br /> |10<br /> |HC0362<br /> |FLANGE-SUCTION TUBE<br /> |<br /> |''Includes hardware''<br /> |1<br /> |-<br /> |11<br /> |43848008<br /> |TUBE-SUCTION<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |H1569<br /> |ADAPTER-45 DEG-#12 JICM X #12 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |H0202<br /> |REDUCER-#24 SAE X #12 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |H1622<br /> |ADAPTER-90 DEG-#12 SAEM X #12 JICM<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |H1644<br /> |PLUG-#24 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |H1610<br /> |ADAPTER-45 DEG-#12 JICSW X #12 JICM<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |PB0311-1<br /> |NIPPLE-#12 NPT X 2&quot;-BRASS<br /> |<br /> | rowspan=&quot;3&quot; |''†† See notes''<br /> |1<br /> |-<br /> |20<br /> |BI0301<br /> |TEE-#12 FNPT<br /> |<br /> |1<br /> |-<br /> |21<br /> |H1502<br /> |ADAPTER-#8 JICM X #12 MNPT<br /> |<br /> |2<br /> |-<br /> |22<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> | rowspan=&quot;5&quot; |''Reservoir mounting hardware'' <br /> <br /> ''(Not shown)''<br /> |2<br /> |-<br /> |23<br /> |HW0405<br /> |BOLT-HHCS-3/8-16 X 2&quot;<br /> |<br /> |2<br /> |-<br /> |24<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |8<br /> |-<br /> |25<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |4<br /> |-<br /> |26<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† RVT silicone required to seal cover plate after removal.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Components required for units equipped with radial piston drive wheel motors plumbed with case drain hoses. See Drive Wheel Assembly section.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Valve Assembly&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Lift Valve and Manifold Detail&lt;/big&gt;''''' ====<br /> [[File:BE-TS Lift Valve and Manifold.png|alt=BE-TS Lift Valve and Manifold|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |80342001<br /> |LEVER VALVE RETRO KIT<br /> |<br /> |''† Required prior to 2006'' <br /> |A/R<br /> |-<br /> |1<br /> |HC0257<br /> |VALVE-LEVER<br /> |<br /> |''Effective from 2006 to Present''<br /> |1<br /> |-<br /> |2<br /> |HC0252<br /> |MANIFOLD-D05-1 BANK<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0318<br /> |BOLT-SHCS-1/4-20 X 1 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |H1642<br /> |PLUG-#12 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H1542<br /> |ADAPTER-#12 JICM X #12 SAEM<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HC0248<br /> |FIXED FLOW REGULATOR<br /> |<br /> |''††14 GPM''<br /> |1<br /> |-<br /> |12<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |13<br /> |H1540<br /> |ADAPTER-#8 JICM X #8 SAEM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |14<br /> |43817085<br /> |PLATE-ADAPTER-VALVE<br /> |<br /> |''† Not shown''<br /> |1<br /> |-<br /> |15<br /> |SS0104<br /> |BOLT-SHCS-1/4-20 X 5/8&quot;-SST<br /> |<br /> |''† Not shown''<br /> |4<br /> |-<br /> |16<br /> |SS0300<br /> |WASHER-FLAT-1/4&quot;-SAE-SST<br /> |<br /> |''† Not shown''<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |<br /> |-<br /> | colspan=&quot;6&quot; |''† Kit includes Items 1 &amp; 14 through 16. Minor modifications to the dash board required.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† For units shipped April 2017 to present''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Floor Drive / Arm Rotation Valve and Manifold Detail&lt;/big&gt;''''' ====<br /> [[File:BE-TS Floor Drive-Arm Rotation Valve and Manifold.png|alt=BE-TS Floor Drive-Arm Rotation Valve and Manifold|frameless|570x570px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0233<br /> |VALVE-LEVER<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HC0251<br /> |MANIFOLD-D03-2 BANK<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1545<br /> |ADAPTER-#10 JICM X #10 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |H1600<br /> |ADAPTER-90 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |H1587<br /> |ADAPTER-#6 JICSW X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HC0211<br /> |VALVE-ADJUSTABLE FLOW CONTROL<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |H1504<br /> |ADAPTER-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |H1640<br /> |PLUG-#6 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |43817033-2<br /> |RISER PLATE<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |14<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |HC0233-SK<br /> |SEAL KIT<br /> |<br /> |''For Item 1 (Not shown)''<br /> |A/R<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Valve Assembly&lt;/big&gt;''''' ====<br /> [[File:BE-TS Valve Assembly.png|alt=BE-TS Valve Assembly|frameless|538x538px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0233<br /> |VALVE-LEVER<br /> |<br /> |<br /> |3<br /> |-<br /> |2<br /> |HC0250<br /> |MANIFOLD-D03-3 BANK<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1610<br /> |ADAPTER-90 DEG-#10 JICM X #10 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |H1641<br /> |PLUG-#10 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H1000<br /> |ADAPTER-#8 SAEM X #4 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |H0001<br /> |NIPPLE-#4 NPT<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HC0247<br /> |FIXED FLOW REGULATOR-2.25 GPM<br /> |<br /> |''† See notes''<br /> |4<br /> |-<br /> |8<br /> |H1504<br /> |ADAPTER-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |H1640<br /> |PLUG-#6 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |H1540<br /> |ADAPTER-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |43817034-2<br /> |RISER PLATE<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |14<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |15<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HC0233-SK<br /> |SEAL KIT<br /> |<br /> |''For Item 1 (Not shown)''<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Units built prior to January 2107 equipped with Adjustable Flow Controls. Fixed Flow Regulators are direct replacement for Adjustable Flow Controls.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Lift Cylinder&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Lift Cylinder.png|alt=BE-TS Lift Cylinder|frameless|582x582px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43822006<br /> |CLEVIS ASSEMBLY<br /> |<br /> |''Sold as assembly only''<br /> |4<br /> |-<br /> |2<br /> |HW0813<br /> |SCREW-SHSS-3/8-16 X 1/2&quot;<br /> |<br /> |''Nylon tipped''<br /> |8<br /> |-<br /> |3<br /> |HC0420<br /> |CYLINDER-LIFT<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |H1645<br /> |ADAPTER-90 DEG-#8 SAEM X #6 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |H0212<br /> |ADAPTER-#6 NPT X #8 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HC0425<br /> |VELOCITY FUSE<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Lift Circuit&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Lift Circuit.png|alt=BE-TS Lift Circuit|frameless|553x553px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43017014-2<br /> |SUPPORT-PILOT DOWN MANIFOLD<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43718008<br /> |STANDOFF<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0315<br /> |BOLT-HHCS-1/4-20 X 4 1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |10<br /> |-<br /> |7<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |5<br /> |-<br /> |8<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |5<br /> |}<br /> <br /> ==== '''''&lt;big&gt;[Discontinued] Lift Circuit Configuration&lt;/big&gt;''''' ====<br /> [[File:(Discontinued) BE-TS Lift Circuit Configuration.png|alt=(Discontinued) BE-TS Lift Circuit Configuration|frameless|507x507px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |H1507<br /> |ADAPTER-#8 JICM X #8 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0264<br /> |VALVE-CHECK-PILOT TO OPEN<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H1621<br /> |ADAPTER-#4 SAEM X #2 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HC0269<br /> |VALVE-ADJUSTABLE FLOW CONTROL<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |H1591<br /> |ADAPTER-90 DEG-#6 JICM X #2 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |H1587<br /> |ADAPTER-#6 JICSW X #4 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1501<br /> |ADAPTER-#8 JICM X #6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43047002<br /> |MANIFOLD-PILOT DOWN<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> ==== '''''&lt;big&gt;[Current] Lift Circuit Configuration&lt;/big&gt;''''' ====<br /> [[File:(Current) BE-TS Lift Circuit Configuration.png|alt=(Current) BE-TS Lift Circuit Configuration|frameless|534x534px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0215<br /> |VALVE-CHECK-CARTRIDGE<br /> |<br /> |<br /> |8<br /> |-<br /> |2<br /> |H1560<br /> |ADAPTER-45 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |H1670<br /> |ADAPTER-45 DEG-#12 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |H1612<br /> |ADAPTER-90 DEG-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HC0283<br /> |VALVE-COUNTER BALANCE<br /> |<br /> |''Includes cartridge''<br /> |1<br /> |-<br /> |6<br /> |43846004<br /> |CARTRIDGE-COUNTER BALANCE<br /> |<br /> |''Replacement cartridge''<br /> |A/R<br /> |-<br /> |7<br /> |H1552<br /> |ADAPTER-#6 JICM X #6 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |H1587<br /> |ADAPTER-#6 JICSW X #4 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1501<br /> |ADAPTER-#8 JICM X #6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43047002<br /> |MANIFOLD-PILOT DOWN<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Cartridges are for replacement only''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Down-Speed Flow Control&lt;/big&gt;''''' ====<br /> [[File:BE-TS Down-Speed Flow Control.png|alt=BE-TS Down-Speed Flow Control|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0270<br /> |VALVE-ADJUSTABLE FLOW CONTROL<br /> |<br /> |''Pressure compensated''<br /> |1<br /> |-<br /> |2<br /> |H0007<br /> |NIPPLE-#8 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1647<br /> |ADAPTER-90 DEG-#10 SAEM X #8 FNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |H1680<br /> |ADAPTER-#10 JICM X #8 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H1690<br /> |ADAPTER-#10 JICSW X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HC0248<br /> |FIXED FLOW REGULATOR<br /> |<br /> |''14 GPM''<br /> |1<br /> |-<br /> |7<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |H1612<br /> |ADAPTER-90 DEG-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1547<br /> |ADAPTER-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Cross Port Relief&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Mounting Configuration&lt;/big&gt;''''' ====<br /> [[File:BE-TS Cross Port Relief Mounting Configuration.png|alt=BE-TS Cross Port Relief Mounting Configuration|frameless|546x546px]]<br /> {| class=&quot;wikitable&quot;<br /> ! colspan=&quot;6&quot; |UNITS BUILT PRIOR TO SEPTEMBER, 2014<br /> |-<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> ! colspan=&quot;6&quot; |UNITS BUILT SEPTEMBER, 2014 TO DECEMBER, 2014<br /> |-<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW0305<br /> |BOLT-HHCS-1/4-20 X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |7<br /> |43058004<br /> |PLATE-SPACER<br /> |<br /> |<br /> |1<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> ! colspan=&quot;6&quot; |UNITS BUILT DECEMBER, 2014 TO PRESENT<br /> |-<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |2<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |}<br /> ''NOTE: Effectivity dates refer to dates new extractor units shipped from the factory. Replacement part effectivity may differ due to factory inventory levels at time of parts order. Consult factory if unsure of parts needed.''<br /> <br /> ==== '''''&lt;big&gt;Components&lt;/big&gt;''''' ====<br /> [[File:BE-TS Cross Port Relief Components.png|alt=BE-TS Cross Port Relief Components|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0262<br /> |VALVE-CROSS PORT RELIEF<br /> |<br /> |''Includes cartridges''<br /> |1<br /> |-<br /> |2<br /> |43046002<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''For Item 1''<br /> |A/R<br /> |-<br /> |3<br /> |H1540<br /> |ADAPTER-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |H1507<br /> |ADAPTER-#8 JICM X #8 MNPT<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |HC0239<br /> |VALVE-ADJUSTABLE FLOW CONTROL<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |H1568<br /> |ADAPTER-45 DEG-#8 JICM X #8 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |H1646<br /> |ADAPTER-90 DEG-#8 SAEM X #6 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |H0805<br /> |TEE-#6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HC0273<br /> |REGULATOR-FIXED FLOW<br /> |<br /> |''7.0 GPM''<br /> |4<br /> |-<br /> |11<br /> |H1501<br /> |ADAPTER-#8 JICM X #6 MNPT<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Floor Drive Cutout&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Floor Drive Cutout.png|alt=BE-TS Floor Drive Cutout|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |SOLENOID-DRIVE CUTOUT<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |7<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |BI0001<br /> |NIPPLE-CLOSE-#8 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |N/A<br /> |SOLENOID-DRIVE CUTOUT<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |10<br /> |YE0501<br /> |CONNECTOR-SOLENOID<br /> |<br /> |''DIN 43650''<br /> |1<br /> |-<br /> |11<br /> |43058004<br /> |PLATE-SPACER<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |HC0278-TS/QS<br /> |SOLENOID-DRIVE CUTOUT<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |H1547<br /> |ADAPTER-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |H1612<br /> |ADAPTER-90 DEG-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Part obsolete. Must be replaced with Retro Kit Part # 80242007.''<br /> |-<br /> | colspan=&quot;6&quot; |''NOTE: Effectivity dates refer to dates new extractor units shipped from the factory. Replacement part effectivity may differ due to factory inventory levels at time of parts order. Consult factory if unsure of parts needed.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Counter Balance Valve&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Counter Balance Valve.png|alt=BE-TS Counter Balance Valve|frameless|554x554px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0263<br /> |VALVE-COUNTER BALANCE<br /> |<br /> |<br /> |1<br /> |-<br /> |1a<br /> |43046004<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''† For Item 1 (Not shown)''<br /> |A/R<br /> |-<br /> |2<br /> |H1615<br /> |ADAPTER-90 DEG-#6 JICM X #6 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |H1552<br /> |ADAPTER-#6 JICM X #6 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0305<br /> |BOLT-HHCS-1/4-20 X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Cartridges are for replacement only''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Transition Plate&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Transition Plate.png|alt=BE-TS Transition Plate|frameless|576x576px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817067-2<br /> |PLATE-TRANSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |H0020<br /> |UNION-BULKHEAD-45 DEG-#6 JICM<br /> |<br /> |<br /> |8<br /> |-<br /> |3<br /> |H0021<br /> |NUT-BULKHEAD-#6 JIC<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Return Line Manifold&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Return Line Manifold.png|alt=BE-TS Return Line Manifold|frameless|555x555px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43847001<br /> |MANIFOLD-RETURN LINE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |H1501<br /> |ADAPTER-#8 JICM X #6 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1503<br /> |ADAPTER-#12 JICM X #12 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |43817069-2<br /> |BRACKET-BULKHEAD<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |H0015<br /> |UNION-BULKHEAD-90 DEG-#12 JICM<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H0016<br /> |NUT-BULKHEAD-#12 JIC<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;EQ Chain Hose Guard&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS EQ Chain Hose Guard.png|alt=BE-TS EQ Chain Hose Guard|frameless|577x577px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43017074-2<br /> |GUARD-HOSE-EQ CHAIN<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Used on units manufactured after May 2015.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Hydraulic Schematics&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Hydraulic Schematic.png|alt=BE-TS Hydraulic Schematic|frameless|1180x1180px]]<br /> <br /> ==== '''''&lt;big&gt;Extended Reach Hydraulic Schematics&lt;/big&gt;''''' ====<br /> [[File:BE-TS Hydraulic Schematic Extended Reach.png|alt=BE-TS Hydraulic Schematic Extended Reach|frameless|905x905px]]<br /> <br /> == &lt;big&gt;Standard Available Options&lt;/big&gt; ==<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Strobe &amp; Alarm&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''&lt;big&gt;''[Discontinued] Strobe Light &amp; Stanchion Configuration''&lt;/big&gt;''' ====<br /> [[File:(Discontinued) BE-TS Strobe Light.png|alt=(Discontinued) BE-TS Strobe Light|frameless|722x722px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0317<br /> |STROBE LIGHT<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41215014<br /> |STANCHION<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0401<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |E1010<br /> |RECEPTACLE-TWIST LOCK<br /> |<br /> |''(Not shown)''<br /> |1<br /> |-<br /> |7<br /> |E1011<br /> |PLUG-TWIST LOCK<br /> |<br /> |''(Not shown)''<br /> |1<br /> |}<br /> <br /> ==== '''&lt;big&gt;''[Discontinued] Audible Alarm Configuration''&lt;/big&gt;''' ====<br /> [[File:(Discontinued) BE-TS Audible Alarm.png|alt=(Discontinued) BE-TS Audible Alarm|frameless|490x490px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0317-A<br /> |AUDIBLE ALARM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0654<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |00117101-2<br /> |MOUNTING BRACKET<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |5<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> ==== '''&lt;big&gt;''[Current] Stack Light Strobe &amp; Alarm Configuration''&lt;/big&gt;''' ====<br /> [[File:(Current) BE-TS Stack Light Strobe and Alarm Configuration.png|alt=(Current) BE-TS Stack Light Strobe and Alarm Configuration|frameless|844x844px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0362<br /> |MOUNTING BASE<br /> |<br /> |''Includes restraints''<br /> |1<br /> |-<br /> |2<br /> |E0365<br /> |TERMINAL BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0363<br /> |STROBE LIGHT-AMBER-120VAC<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |4<br /> |E0364<br /> |AUDIBLE ALARM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |5<br /> |SS0118<br /> |SCREW-SHCS-#8-32 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |SS0303<br /> |WASHER-FLAT-#8<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |SS0203<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |E1010<br /> |RECEPTACLE-TWIST LOCK<br /> |<br /> |''(Not shown)''<br /> |1<br /> |-<br /> |9<br /> |E1011<br /> |PLUG-TWIST LOCK<br /> |<br /> |''(Not shown)''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† For units not equipped with the audible alarm option, a cap (not shown) mounts on top of the strobe light in place of the audible alarm. Cap included with base.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† For units not equipped with the strobe light option, the audible alarm mounts directly to the terminal base in place of the strobe light.'' <br /> |}<br /> <br /> ==== '''&lt;big&gt;''Strobe &amp; Alarm Mounting''&lt;/big&gt;''' ====<br /> [[File:BE-TS Strobe and Alarm Mounting.png|alt=BE-TS Strobe and Alarm Mounting|frameless|516x516px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41235060<br /> |STACK LIGHT STANCHION<br /> |<br /> |''Discontinued''<br /> |A/R<br /> |-<br /> |2<br /> |HW0401<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |3<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |4<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |REF<br /> |43032006<br /> |STANCHION ASSEMBLY<br /> |<br /> |''Includes items 5 through 8''<br /> |A/R<br /> |-<br /> |5<br /> |43035003<br /> |STACK LIGHT STANCHION<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43037007-2<br /> |CLAMP BRACKET<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0305<br /> |BOLT-HHCS-1/4-20 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0050<br /> |NUT-FLANGED-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |43037004-2<br /> |MOUNTING BRACKET<br /> |<br /> |''Overhead Guard only''<br /> |1<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Horn&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Horn.png|alt=BE-TS Horn|frameless|565x565px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |YE0308<br /> |BUTTON-HORN<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0317-A<br /> |AUDIBLE ALARM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0654<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |00117101-2<br /> |MOUNTING BRACKET<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |11<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Overhead Guard&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Overhead Guard.png|alt=BE-TS Overhead Guard|frameless|530x530px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817119-2<br /> |GUARD-SIDE<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |2<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0406<br /> |BOLT-HHCS-3/8-16 X 2-1/2&quot;<br /> |<br /> |<br /> |5<br /> |-<br /> |5<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |6<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |<br /> |<br /> |5<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Side Guards used on units built November 2013 to Present. Mounting hardware valid for all units with Removable Overhead Guard.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Operator Sheild&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''&lt;big&gt;''[Current] Operator Shield''&lt;/big&gt;''' ====<br /> [[File:(Current) BE-TS 30 Operator Sheild.png|alt=(Current) BE-TS 30 Operator Sheild|frameless|566x566px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43814025<br /> |OPERATOR SHIELD<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |HC0542<br /> |GASKET EDGING<br /> |<br /> |''(2) @ 38&quot; LG, (1) @ 60&quot; LG''<br /> |136&quot;<br /> |-<br /> |3<br /> |43817116-2<br /> |BRACKET-TOP<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |1412FSW<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |43817117-2<br /> |BRACKET-CENTER SUPPORT-OUTSIDE<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43817118-2<br /> |BRACKET-CENTER SUPPORT-INSIDE<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |SS0114<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |8<br /> |SS0502<br /> |LANYARD-8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |SS0501<br /> |PIN-QUICK RELEASE-3/16&quot; X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Consult factory for units built prior to November 2013 with plexiglass bolted directly to Overhead Guard structure on front and sides.'' <br /> |}<br /> <br /> ==== '''&lt;big&gt;''Operator Shield (Used Prior to November 2013)''&lt;/big&gt;''' ====<br /> [[File:BE-TS Operator Shield (Used Prior to November 2013).png|alt=BE-TS Operator Shield (Used Prior to November 2013)|frameless|559x559px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43717116<br /> |SHIELD-OPERATOR<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |43015010<br /> |FRAME-OPERATOR SHIELD WELDMENT<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43017066-2<br /> |SUPPORT-SIDE<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |43017065-2<br /> |SUPPORT-LOWER<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43017067-2<br /> |SUPPORT-UPPER<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |7<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |32<br /> |-<br /> |8<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |9<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |16<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Consult factory for units with plexiglass bolted directly to frame.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Powered Roller Cutout&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Powered Roller Cutout Photo Eye &amp; Reflector Locations (Prior to May 2022)&lt;/big&gt;''''' ====<br /> [[File:BE-TS Powered Roller Cutout Photo Eye &amp; Reflector Locations.png|alt=BE-TS Powered Roller Cutout Photo Eye &amp; Reflector Locations|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1321A<br /> |PHOTO EYE<br /> |<br /> |''† Polarized''<br /> |1<br /> |-<br /> |2<br /> |41217170-2<br /> |MOUNT-PHOTO EYE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0216<br /> |SCREW-#10-24 X 2&quot;<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |4<br /> |HW0032<br /> |NUT-NILN-#10-24<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |E1321-R<br /> |REFLECTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |41217171<br /> |MOUNT-REFLECTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |SS0803<br /> |SCREW-RHMS-#6-32 X 5/8&quot;<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |8<br /> |SS0125<br /> |BOLT-HHCS-1/4-20 X 5/8&quot;<br /> |<br /> |''††† See notes''<br /> |4<br /> |-<br /> |9<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''Quantities provided are for Single-Sided (PRC-1) Power Roller Cutout option. For units with Double Sided (PRC-2) option, quantities are double.''<br /> |-<br /> | colspan=&quot;6&quot; |''† Polarized Photo Eye recommended to prevent potential operational issues with very smooth or shiny battery cases.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Photo Eye &amp; Reflector mounting screws are trimmed to length.''<br /> |-<br /> | colspan=&quot;6&quot; |''††† Photo Eye &amp; Reflector Bracket Mounting Screws may be required to ground flush to prevent intereferance with guards.''<br /> |}<br /> '''''&lt;big&gt;Powered Roller Cutout Photo Eye &amp; Reflector Locations (May 2022 to Present)&lt;/big&gt;'''''<br /> <br /> [[File:BE-TS Powered Roller Cutout Photo Eye &amp; Reflector Locations (May 2022 to Present).png|alt=BE-TS Powered Roller Cutout Photo Eye &amp; Reflector Locations (May 2022 to Present)|frameless|555x555px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1321A<br /> |PHOTO EYE<br /> |<br /> |''† Polarized''<br /> |1<br /> |-<br /> |2<br /> |13537001-2<br /> |MOUNT-PHOTO EYE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E1321-R<br /> |REFLECTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |41217171<br /> |MOUNT-REFLECTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |SS0803<br /> |SCREW-RHMS-#6-32 X 5/8&quot;<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |PL0506<br /> |GROMMET-SEALING-2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''Quantities provided are for Single-Sided (PRC-1) Power Roller Cutout option. For units with Double Sided (PRC-2) option, quantities are double.''<br /> |-<br /> | colspan=&quot;6&quot; |''† Polarized Photo Eye recommended to prevent potential operational issues with very smooth or shiny battery cases.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Reflector mounting screws are trimmed to length.''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Powered Roller Cutout Mounting&lt;/big&gt;''''' ====<br /> [[File:BE-TS Powered Roller Cutout Mounting.png|alt=BE-TS Powered Roller Cutout Mounting|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0281<br /> |SOLENOID VALVE<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |BI0001<br /> |NIPPLE-CLOSE-#8 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |6<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |7<br /> |H1600<br /> |ADAPTER-90 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |H1546<br /> |ADAPTER-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Powered Roller Cutout Override Button&lt;/big&gt;''''' ====<br /> [[File:BE-TS Powered Roller Cutout Override Button.png|alt=BE-TS Powered Roller Cutout Override Button|frameless|568x568px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ACTUATOR-PUSH BUTTON (DISCONTINUED)<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |N/A<br /> |CONTACT BLOCK-N/C (DISCONTINUED)<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |3<br /> |E0384<br /> |ACTUATOR-PUSH BUTTON<br /> |80932002<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0386<br /> |CONTACT BLOCK-N/C<br /> |80932002<br /> |<br /> |1<br /> |-<br /> |5<br /> |E0387<br /> |DUMMY BLOCK<br /> |80932002<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0388<br /> |PUSH BUTTON-GREEN<br /> |80932002<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''Button location on dash may vary from position shown.''<br /> |-<br /> | colspan=&quot;6&quot; |''† Parts no longer available. Must order new Push-Button Switch Kit 80932002''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Powered Roller Cutout Junction Box&lt;/big&gt;''''' ====<br /> [[File:BE-TS Powered Roller Cutout Junction Box.png|alt=BE-TS Powered Roller Cutout Junction Box|frameless|535x535px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |3<br /> |-<br /> |4<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |4<br /> |-<br /> |5<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |7<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |''Mounting bolts (Not shown)''<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Level Assist&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Level Assist.png|alt=BE-TS Level Assist|frameless|568x568px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1321A<br /> |PHOTO EYE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |13537001-2<br /> |MOUNT-PHOTO EYE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |PL0502<br /> |GROMMET<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43837007<br /> |TARGET ANGLE<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |E0376<br /> |INDICATOR LIGHT<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |7<br /> |HW0152<br /> |WASHER-5/8&quot; I.D.<br /> |<br /> |''†† See notes (Not shown)''<br /> |2<br /> |-<br /> |8<br /> |E1321-RT<br /> |REFLECTIVE TAPE<br /> |<br /> |''(Not shown)''<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''Location of Indicator Light on the dash may vary from location shown''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Extractors built prior to October 2021 used Multi-Piece Indicator Lights with Replaceable Bulb and Lens are no longer available. Current Indicator Light is a 1-Piece LED Assembly. Replacement of any Multi-Piece Component requires replacing entire assembly with current, 1-Piece Indicator Light.''<br /> |-<br /> | colspan=&quot;6&quot; |''††† Washers required for units that did not ship with Level Assist option from the factory.''<br /> |}<br /> '''&lt;big&gt;''Level Assist Junction Box''&lt;/big&gt;'''<br /> <br /> [[File:BE-TS Level Assist Junction Box.png|alt=BE-TS Level Assist Junction Box|frameless|524x524px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |4<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |5<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |''Mounting bolts (Not shown)''<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Blue Light&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Blue Light.png|alt=BE-TS Blue Light|frameless|611x611px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |EW2002B<br /> |BLUE PROJECTION SPOTLIGHT<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW0401<br /> |BOLT-HHCS-3/8-16 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0107<br /> |WASHER-LOCK-3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |4<br /> |-<br /> |5<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43835001<br /> |STANCHION-POWER<br /> |<br /> |<br /> |2<br /> |}<br /> [[File:BE-TS Blue Light Enclosure.png|alt=BE-TS Blue Light Enclosure|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-8&quot; X 8&quot; X 4&quot;<br /> |<br /> |''Consult factory''<br /> |1<br /> |-<br /> |2<br /> |E0135<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |''Blank panel without holes''<br /> |1<br /> |-<br /> |3<br /> |PS5R-SC12<br /> |POWER SUPPLY<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0908<br /> |MOUNTING RAIL<br /> |<br /> |''Sold by length''<br /> |A/R<br /> |-<br /> |5<br /> |YE0402<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |YE0405<br /> |END BARRIER<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |YE0406<br /> |END ANCHOR<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |E0341<br /> |GROUND LUG<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |3<br /> |-<br /> |10<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |11<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |''2 per Mounting Rail''<br /> |5<br /> |-<br /> |12<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |''2 per Mounting Rail''<br /> |5<br /> |-<br /> |13<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |''2 per Mounting Rail''<br /> |5<br /> |-<br /> |14<br /> |00196404<br /> |LABEL-DANGER<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Water Cart&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Water Cart.png|alt=BE-TS Water Cart|frameless|549x549px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PB0033<br /> |OVERFILL INDICATOR<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |PB0034<br /> |LOCKNUT-CONDUIT-2&quot;-NYLON<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0308<br /> |FILLER/BREATHER ASSEMBLY<br /> |<br /> |Includes gaskets<br /> |1<br /> |-<br /> |4<br /> |HW0209<br /> |SCREW-RHMS-10-32 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |5<br /> |550-057<br /> |HOSE-FILL-3/4&quot; X 15'<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |550-027<br /> |ON/OFF VALVE<br /> |<br /> |''(Not shown)''<br /> |1<br /> |-<br /> |7<br /> |PB0902<br /> |HOSE-3/4&quot;<br /> |<br /> |<br /> |30&quot;<br /> |-<br /> |8<br /> |HW1018<br /> |HOSE CLAMP-3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |PB0603<br /> |ADAPTER-3/4&quot; NPT X 3/4&quot; BARB<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |PB0456<br /> |ELBOW-STR-90 DEG-3/4&quot; NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |PB0451<br /> |ADAPTER-3/4&quot; NPT X 3/4 GHT<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |PB0302<br /> |PLUG-3/4&quot; NPT<br /> |<br /> |<br /> |<br /> |-<br /> |13<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |14<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |SS0106<br /> |SHCS-#10-24 X 1/2&quot;-SST<br /> |<br /> |<br /> |6<br /> |-<br /> |16<br /> |SS0114<br /> |BHSCS-#10-24 X 1/2&quot; SST<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |SS0301<br /> |WASHER-FLAT-#10-SAE-SST<br /> |<br /> |<br /> |10<br /> |-<br /> |18<br /> |00196701<br /> |DECAL-BHS-12&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |00196404<br /> |LABEL-DANGER-&quot;120 VOLTS&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |20<br /> |00166648<br /> |LABEL, NON-POTABLE<br /> |<br /> |<br /> |1<br /> |-<br /> |21<br /> |HW0418<br /> |BOLT-HHCS-3/8-16 X 2-1/4&quot;<br /> |<br /> | rowspan=&quot;3&quot; |''Mounting bolts'' <br /> <br /> ''(Not shown)''<br /> |2<br /> |-<br /> |22<br /> |HW0031<br /> |NUT-HEX-3/8-16 CENTERLOCK<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |2<br /> |}<br /> [[File:BE-TS Water Cart 2.png|alt=BE-TS Water Cart|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1511<br /> |SWITCH-ROCKER<br /> |<br /> |Submersible rated<br /> |1<br /> |-<br /> |2<br /> |E0378<br /> |INDICATOR LIGHT-120VAC-GREEN<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |3<br /> |E0376<br /> |INDICATOR LIGHT-120VAC-AMBER<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |4<br /> |E0377<br /> |INDICATOR LIGHT-120VAC-RED<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |5<br /> |46917015<br /> |PLACARD-INDICATOR LIGHT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0505<br /> |16-3 SO CORD<br /> |<br /> |<br /> |72&quot;<br /> |-<br /> |7<br /> |E0653<br /> |PLUG-120V/15A<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |9<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |PL0501<br /> |GROMMET-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |E1313<br /> |SOCKET-RELAY-8 PIN<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |E0331<br /> |RELAY-DPDT-110VAC<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |E0440<br /> |TERMINAL BLOCK-8 POLE<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |E1070<br /> |GROUND BAR-4 POSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |HW0139<br /> |SCREW-RHMS-#8-32 X 1 1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |HW0135<br /> |SCREW-RHMS-#8-32 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW1061<br /> |SCREW-RHMS-#8-32 X 1&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |5<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Water carts built prior to October 2021 used Multi-Piece Indicator Lights with Replaceable Bulb and Lens and are no longer available. Current Indicator Lights are a 1-Piece LED Assemblly.'' <br /> <br /> ''Replacement of any Mutli-Piece component requires replacing entire assembly with current 1-Piece Indicator Light.'' <br /> |}<br /> <br /> = &lt;big&gt;Service &amp; Maintenance&lt;/big&gt; =<br /> <br /> == &lt;big&gt;Daily Inspection List&lt;/big&gt; ==<br /> The points listed below should be visually inspected daily prior to initial start up of the Battery Extractor to ensure safe and proper operation of the unit and to help avoid unnecessary down time.<br /> <br /> # Walk around unit and inspect for any physical damage to machine not previously noted.<br /> # Verify all guards are in place.<br /> # Inspect the AC power feed for any damage.<br /> # Vacuum equipped units: Inspect vacuum cups for damage to cup sealing surface, backup casting, and vacuum hoses. Magnet equipped units: Inspect magnets for damage to attachment face, proximity sensor cover, cables and connections.<br /> # Inspect travel path and area around unit for any hydraulic oil that could be a potential repair/maintenance issue and/or safety hazard.<br /> # Check oil level in hydraulic reservoir at fill level gauge.<br /> # Check that operator safety gate and all safety switches are in proper working order.<br /> # Verify extractor path is free of obstructions.<br /> # Check roller beds for any debris and clean as required.<br /> # Board unit, engage system and verify all functions are operating properly and that no abnormal or unusual noises are present.<br /> <br /> ''* Use form IF-5008 when preforming daily inspections''<br /> <br /> == &lt;big&gt;Operator's Daily Checklist&lt;/big&gt; ==<br /> [[File:BE-TS Operator's Daily Checklist.png|alt=BE-TS Operator's Daily Checklist|frameless|1180x1180px]]<br /> <br /> == &lt;big&gt;Recommended Battery Extractor Lubrication Intervals&lt;/big&gt; ==<br /> {| class=&quot;wikitable&quot;<br /> !Lubrication Task<br /> !'''# of Places'''<br /> !Intervals<br /> |-<br /> |'''1. Lubricate grease fittings using #2 lithium based grease'''<br /> |<br /> |<br /> |-<br /> |A. Extractor arm drive nut and carrier bearings<br /> |5 places<br /> |50 hrs / Weekly<br /> |-<br /> |B. Idler casters<br /> |2 places<br /> |200 hrs / Weekly<br /> |-<br /> |'''2. Wipe off and lubricate chains using light machine oil'''<br /> |<br /> |<br /> |-<br /> |A. #80 Lift chains (Not applicable to BE-SL units)<br /> |4 places<br /> |200 hrs / Monthly<br /> |-<br /> |B. #60 Equalization chains<br /> |4 places<br /> |200 hrs / Monthly<br /> |-<br /> |C. #35 Powered roller chains<br /> |8 places<br /> |200 hrs / Monthly<br /> |-<br /> |'''3. Change return line hydraulic fluid filter'''<br /> ''(Oil filtration of at least 20 microns is recommended)''<br /> |1 place<br /> |300 hrs / Twice Quarterly<br /> |-<br /> |'''4. Change hydraulic fluid'''<br /> | -<br /> |600 hrs / Quarterly *<br /> |-<br /> |'''5. Complete preventative maintenance (PM)'''<br /> Use form IF-5029 for Vacuum equipped units.<br /> <br /> Use form IF-5028 for Magnet equipped units.<br /> | -<br /> |600 hrs / Quarterly<br /> |-<br /> ! colspan=&quot;3&quot; |NOTES<br /> |-<br /> | colspan=&quot;3&quot; |''These recommendations are based on average use in a typical warehouse environment and may be adjusted based on specific circumstances. Dusty and/or extreme hot/cold environments may require more frequent lubrication.''<br /> |-<br /> | colspan=&quot;3&quot; |''* BHS recommends implementing an oil sampling and analysis program to monitor hydraulic fluid condition and determine when hydraulic fluid changes are required. The fluid analysis program should be a continuous process and all results should be evaluated. Changes in the condition of the hydraulic system may indicate component wear, fluid deterioration and/or contamination.''<br /> |}<br /> {|<br /> |[[File:NOTICE-warn.png|alt=NOTICE|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:NOTICE-warn.png]]<br /> |<br /> *'''The mounted bearings used on the power rollers, equalization shafts, drive wheels, and drive screw are sealed and shielded bearings. Lubrication may breach the seals of these bearings, therefore these bearings should not be lubricated unless the machine has been cleaned with a high pressure wash on a regular basis (not recommended).'''<br /> *'''Hydraulic fluid should not exceed 140°F (60°C) for extended periods.'''<br /> |}<br /> ===&lt;big&gt;'''&lt;u&gt;Reservoir Capacities ''(APPROX.)''&lt;/u&gt;'''&lt;/big&gt;===<br /> {|<br /> |BE-SL<br /> |18 gal (68 L)<br /> |-<br /> |BE-DS<br /> |18 gal (68 L)<br /> |-<br /> | rowspan=&quot;2&quot; |BE-TS<br /> |30 gal (114 L) ''(Units built Pre-2014)''<br /> |-<br /> |45 gal (170 L) ''(Units built 2014 to Present)''<br /> |-<br /> |BE-QS<br /> |60 gal (227 L)<br /> |}The reservoir should be filled so fluid level is within a half inch (1/2&quot;) of the top of sight glass. Use Chevron AW 68 or equivalent ISO 68 grade hydraulic oil with anti-wear additives and foam suppressant.<br /> <br /> '''''NOTE'':''' Some units shipped from the factory with AW 32 oil for cold environment operation. Units using AW 32 from the factory may experience poor performance if AW 68 is used instead of AW 32 due to the increased viscosity of the oil.<br /> <br /> ==&lt;big&gt;Preventative Maintenance Reports&lt;/big&gt;==<br /> ===&lt;big&gt;&lt;u&gt;Vacuum Extraction&lt;/u&gt;&lt;/big&gt;===<br /> [[File:Battery Extractor Series - Vacuum Extraction Planned Maintenance Inspection Report Page 1.png|alt=Battery Extractor Series - Vacuum Extraction Planned Maintenance Inspection Report Page1|frameless|1238x1238px|link=https://tech.bhs1.com/index.php/File:Battery_Extractor_Series_-_Vacuum_Extraction_Planned_Maintenance_Inspection_Report_Page_1.png]]<br /> <br /> [[File:Battery Extractor Series - Vacuum Extraction Planned Maintenance Inspection Report page2.png|alt=Battery Extractor Series - Vacuum Extraction Planned Maintenance Inspection Report Page 2|frameless|1230x1230px|link=https://tech.bhs1.com/index.php/File:Battery_Extractor_Series_-_Vacuum_Extraction_Planned_Maintenance_Inspection_Report_page2.png]]<br /> ===&lt;big&gt;&lt;u&gt;Magnet Extraction&lt;/u&gt;&lt;/big&gt;===<br /> [[File:Battery Extractor Series - Magnet Extraction Planned Maintenance Inspection Report Page 1.png|alt=Battery Extractor Series - Magnet Extraction Planned Maintenance Inspection Report Page 1|frameless|1224x1224px|link=https://tech.bhs1.com/index.php/File:Battery_Extractor_Series_-_Magnet_Extraction_Planned_Maintenance_Inspection_Report_Page_1.png]]<br /> <br /> [[File:Battery Extractor Series - Magnet Extraction Planned Maintenance Inspection Report Page 2.png|alt=Battery Extractor Series - Magnet Extraction Planned Maintenance Inspection Report Page 2|frameless|1233x1233px|link=https://tech.bhs1.com/index.php/File:Battery_Extractor_Series_-_Magnet_Extraction_Planned_Maintenance_Inspection_Report_Page_2.png]]<br /> <br /> ==&lt;big&gt;80292002-i – Equalization Chain Installation / Resetting Procedure&lt;/big&gt;==<br /> ===&lt;big&gt;&lt;u&gt;Required Tools&lt;/u&gt;&lt;/big&gt;===<br /> *Large standard screwdriver<br /> *1/8&quot;, 5/32&quot;, 3/16&quot; Allen wrench<br /> *(2) 1-1/8&quot; Open-end wrenches<br /> *Needle nose pliers<br /> *6&quot; Steel scale (ruler)<br /> *Brake cleaner (non-chlorinated)<br /> *Loctite #242 (blue)<br /> *80292002 - E.Q. Adjustment stop kit (SL, DS, TS) or 80492001 - BE-QS E.Q. Adjustment stop kit<br /> *Ladder or work platform ''(see notes)''<br /> ===&lt;big&gt;&lt;u&gt;''Optional Tools''&lt;/u&gt;&lt;/big&gt;===<br /> *Wire brush for removing Loctite from components prior to reassembly<br /> ===&lt;big&gt;&lt;u&gt;Notes&lt;/u&gt;&lt;/big&gt;===<br /> *''A ladder, man lift or other device is required to access the upper E.Q. studs on BE-TS and BE-QS units.''<br /> *''The following procedures must be performed with the extractor unloaded and in a level area of the travel path.''<br /> *''Installation of the E.Q. stop kit requires (4) persons plus a trained battery extractor operator to raise and lower the inner carriage.''<br /> *''It is recommended to have new E.Q. chain connecting links on hand prior to performing the following procedures.''<br /> *''The upper E.Q. stud lock washers cannot be reused and must be replaced prior to reassembly.''<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Page 369 Image 0001.png|alt=BE-TS with EQ Adjustment Stops Installed|none|thumb|300x300px|BE-TS with EQ Adjustment Stops Installed|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Page_369_Image_0001.png]]<br /> ===&lt;big&gt;&lt;u&gt;IMPORTANT&lt;/u&gt;&lt;/big&gt;===<br /> *'''Read and understand the Safety and De-energization Procedure TP-606 before starting this procedure.'''<br /> *'''Read and understand these instructions completely before starting this procedure.'''<br /> ===&lt;big&gt;&lt;u&gt;Procedure&lt;/u&gt;&lt;/big&gt;===<br /> 1. Remove the inner and outer frame guards to access the lower equalization studs.<br /> <br /> 2. Raise the inner frame approximately 30&quot; (762 mm) for SL, DS and TS units or 50&quot; (1270 mm) for QS units from the fully lowered position. Install (1) adjustment stop at each corner of the roller bed. See Figure 1.[[File:IOP-400 BE-SL&amp;DS (10-23) EQ Chain Instructions-Figure1.png|alt=|none|thumb|375x375px|FIGURE 1|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_EQ_Chain_Instructions-Figure1.png]]3. Slowly lower the inner carriage until the roller bed is firmly and securely seated against all four stops. See Figure 2.[[File:IOP-400 BE-SL&amp;DS (10-23) Page 370 Image 0002.png|alt=Roller bed firmly seated against all four stops|none|thumb|398x398px|FIGURE 2|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Page_370_Image_0002.png]]4. Lockout/tagout the B.E. per your corporate policy.<br /> <br /> 5. De-energize the B.E. per BHS Safety and De-energization procedure TP-606.<br /> <br /> 6. Loosen and remove the upper hex nuts and remove the upper chain studs. Remove the lock washers from the upper chain studs. Save the hex nuts for reassembly later. Discard the lock washers and obtain new, 3/4&quot; split-ring lock washers for reassembly.<br /> <br /> 7. If replacing the chain, remove the upper stud and remove the chain from the lower stud. Discard the connecting links.<br /> *''If the E.Q. chains are being reset due to a connecting link failure, it is recommended to also replace the stud where the connecting link failed.''<br /> *''It is recommended to replace the connecting links when replacing or resetting the E.Q. chains.''<br /> 8. If replacing a lower stud, remove the connecting link and disconnect the chain. Loosen the hex nut and remove the stud. Remove the hex nut from the old stud and reinstall it on the new stud. Reinstall the new stud so that it is flush with the bottom of the frame and the hole is aligned front-to-back with the extractor.<br /> <br /> 9. Attach the chains to the lower studs using the connecting links. Attach the upper studs to the chains using the connecting links, making sure the nut is threaded down near the connecting link and lay the chains in the frame. See Figure 3.<br /> *''Do not fully assemble the lower connecting links by bending the cotter pins as the connecting link may need to be removed later for stud adjustment.''[[File:IOP-400 BE-SL&amp;DS (10-23) EQ Chain Attached to Upper Stud.png|alt=BE-TS Chain Attached to Upper Stud|none|thumb|300x300px|FIGURE 3|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_EQ_Chain_Attached_to_Upper_Stud.png]]<br /> 10. If new E.Q. sprockets are to be installed, remove the clamp collars and old sprockets. Install the new sprockets and reinstall the clamp collars. DO NOT tighten the set screws at this point as adjustment/alignment may be required.<br /> *''Sprockets MUST be keyed in-line.''<br /> 11. Align the E.Q. shafts so that the keyways are in the 2 o'clock position (approximately 60 degrees from vertical). This will bring the sprocket set screws to the top of the sprocket when the inner carriage is lowered. See Figure 4.[[File:IOP-400 BE-SL&amp;DS (10-23) EQ Shafts aligned 60 Degrees from Vertical.png|alt=BE-TS EQ Shafts aligned 60 Degrees from Vertical|none|thumb|300x300px|FIGURE 4|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_EQ_Shafts_aligned_60_Degrees_from_Vertical.png]]12. Starting with the inside chain, route the chain over the sprocket directly above the lower stud and under the inside sprocket on the opposite shaft. Attach the upper stud to the top cross bar, making sure a new 3/4&quot; split -ring lock washer is installed between the cross bar and lower hex nut. Hand tighten the upper stud adjusting nut to remove slack from the chain. See Figure 5.<br /> <br /> 13. Route the outer chain over the sprocket, above the stud and under the sprocket on the opposite shaft. Attach the upper stud to the top cross bar, making sure a new, 3/4&quot; split-ring lock washer is installed between the cross bar and lower hex nut. Hand tighten the upper stud adjusting nut to remove slack from the chain. See Figure 5.<br /> *''It is recommended to begin at the operator end where room is limited allowing easier access at the opposite end to route the chain under the final sprocket.''<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Inside and Outside EQ Chains.png|alt=BE-TS Inside and Outside EQ Chains|none|thumb|499x499px|FIGURE 5|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Inside_and_Outside_EQ_Chains.png]]14. Repeat steps 11 through 13 for the opposite side of the extractor. It is likely that a large, standard screwdriver will be necessary to position the final chain over the sprocket. See Figure 6.[[File:IOP-400 BE-SL&amp;DS (10-23) Page 371 Image 0002.png|alt=It is likely that a large, standard screwdriver will be necessary to position the final chain over the sprocket.|none|thumb|300x300px|FIGURE 6|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Page_371_Image_0002.png]]15. Adjust the lower studs up or down as necessary to take the slack out of the chain between the lower studs and the sprockets by removing the connecting link from the stud and turning the stud. Tighten the hex nuts against the frame once the studs have been adjusted. Reattach the chain.<br /> *DO NOT allow the stud to twist when tightening the hex nuts.<br /> 16. Tighten the upper hex nut on the upper studs until there is approximately 1/4&quot; (7 mm) of total deflection in the middle of the upper, vertical chain sections. Tighten the lower hex nuts on the upper studs to lock the studs in place.<br /> *''Each section of chain between the sprockets should have approximately the same tension as the other on the same side. See Figure 5.''<br /> 17. Raise the inner frame and remove the adjustment stops from the four corners and lower the inside frame.<br /> <br /> 18. Verify equalization sprocket and stud alignment by using a 6&quot; scale. Measure the distance from the inside roller bed frame to the center of the equalization stud. Compare this distance with the measurements from the inside roller bed frame to the center-lines of the sprockets. Adjust the position of the sprocket as necessary to make the distances equal. This will ensure the chain and sprockets are in line with the stud. Repeat this process for the three remaining chains. See Figures 7 &amp; 8.<br /> <br /> 19. Raise and lower the inner frame several times and listen for any chain popping noises to confirm the sprockets are in line with the lower studs. If there is no popping noise, lower the inner frame all the way down.[[File:IOP-400 BE-SL&amp;DS (10-23) EQ Chain Verify equalization sprocket and stud alignment by using a 6in scale-Fig7.png|alt=BE-TS EQ Chain Procedure Figure 7 - Verify equalization sprocket and stud alignment by using a 6&quot; scale|none|thumb|300x300px|FIGURE 7|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_EQ_Chain_Verify_equalization_sprocket_and_stud_alignment_by_using_a_6in_scale-Fig7.png]][[File:IOP-400 BE-SL&amp;DS (10-23) EQ Chain Verify equalization sprocket and stud alignment by using a 6in scale-Fig8.png|alt=BE-TS EQ Chain Verify equalization sprocket and stud alignment by using a 6in scale - Fig 8|none|thumb|300x300px|FIGURE 8|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_EQ_Chain_Verify_equalization_sprocket_and_stud_alignment_by_using_a_6in_scale-Fig8.png]]20. Clean any existing, hardened Loctite from the sprockets, sprocket sets screws, clamp collars and clamp collar bolts.<br /> <br /> 21. Apply Loctite to and tighten the set screws on the sprockets. Slide the clamp collars against the outside sprocket, loctite and tighten the clamp collars.<br /> ==&lt;big&gt;80292001-i – Battery Extractor Service Stand Installation Instructions&lt;/big&gt;==<br /> ===&lt;big&gt;&lt;u&gt;Required Tools&lt;/u&gt;&lt;/big&gt;===<br /> None<br /> ===&lt;big&gt;&lt;u&gt;Notes&lt;/u&gt;&lt;/big&gt;===<br /> *''Refer to kit part # 80292001 or 80392001 for the complete bill of materials supplied.''<br /> *''Remove ALL batteries from extractor prior to installation / service.''<br /> *''Installation of service stands requires (2) persons plus a trained battery extractor operator to raise and lower the inner carriage. DO NOT attempt installation with less than (3) persons.''<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Single Level Service Stand Properly Installed.png|alt=Single Level Service Stand Properly Installed|none|thumb|368x368px|Single Level Service Stand Properly Installed|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Single_Level_Service_Stand_Properly_Installed.png]]<br /> ===&lt;big&gt;&lt;u&gt;IMPORTANT&lt;/u&gt;&lt;/big&gt;===<br /> *'''Read and understand the Safety and De-energization Procedure TP-606 before starting this procedure.'''<br /> *'''Read and understand these instructions completely before starting this procedure.'''<br /> ===&lt;big&gt;&lt;u&gt;Procedure&lt;/u&gt;&lt;/big&gt;===<br /> 1. Have a qualified operator raise the inner carriage of the extractor to the required height for installation. For single level applications, the required height will be approximately 25&quot; (64 cm) from the fully lowered position. For double, triple, and quad stack machines, the required height will be approximately 55&quot; (140 cm) from the fully lowered position.<br /> *On double, triple, and quad stack battery extractors, the operator either must remain on the operator platform during service or be provided an OSHA approved method of egress. This is not applicable to single level battery extractors as the operator platform height is fixed.<br /> 2. Install the stands by engaging the top of the stand into the inner carriage cutouts. Place the bottom channel of the stand over the tube of the outer frame. The top flanges of each stand are tapered to aid in proper alignment of the stand with the inner frame.<br /> <br /> See Figures 1 &amp; 2.[[File:IOP-400 BE-SL&amp;DS (10-23) engaging the top of the stand into the inner carriage cutout.png|alt=Properly seated in cutout|none|thumb|300x300px|FIGURE 1|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_engaging_the_top_of_the_stand_into_the_inner_carriage_cutout.png]][[File:IOP-400 BE-SL&amp;DS (10-23) Page 374 Image 0005.png|none|thumb|300x300px|FIGURE 2|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Page_374_Image_0005.png]]3. Once BOTH stands have been properly placed, SLOWLY lower the inner carriage while the stands are held in place.<br /> <br /> 4. Once the inner carriage is firmly seated on the service stands, verify the stands are securely installed. See Figure 3.[[File:IOP-400 BE-SL&amp;DS (10-23) Page 374 Image 0006.png|none|thumb|450x450px|FIGURE 3|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Page_374_Image_0006.png]]<br /> ==&lt;big&gt;Trouble Shooting Guide&lt;/big&gt;==<br /> {| class=&quot;wikitable&quot;<br /> !Problem Symptom<br /> !Probable Cause<br /> !Solution<br /> |-<br /> |Hydraulic power Unit does not operate.<br /> No electric to power unit motor.<br /> |1. No AC power to Unit.<br /> 2. Reset on magnetic motor starter tripped.<br /> <br /> 3. Gate switch not actuated.<br /> <br /> 4. Foot Pedal switch not engaged.<br /> <br /> 5. Emergency Stop switch is depressed.<br /> |1. Check fuses or breaker.<br /> 2. Check reset button.<br /> <br /> 3. Make sure safety gate is engaging switch.<br /> <br /> 4. Check foot pedal for obstruction.<br /> <br /> 5. Reset button using machine key.<br /> |-<br /> |Power unit runs but no pressure reading at gauge,<br /> also no functions move.<br /> |1. AC input is in reverse phase. Motor is running backwards.<br /> 2. Main system relief valve stuck open or defective.<br /> <br /> 3. Coupling between motor and pump loose.<br /> |1. Reverse any two of the three hot lines to unit.<br /> 2. Check relief valve cartridge for trash or debris.<br /> <br /> Replace as required.<br /> <br /> 3. Inspect coupling assy.<br /> |-<br /> |Magnetic starter contact chatters-at startup.<br /> Contact chatters while traveling.<br /> |1. 1 leg of 3 phase input power out.<br /> 2. Safety gate and/or gate switch out of adjustment.<br /> |1. Check fuse or circuit breaker at service panel.<br /> 2. Check and adjust gate or switch as required to<br /> <br /> ensure full engagement of plunger on gate<br /> <br /> switch and that the safety gate is not bouncing<br /> <br /> due to vibration.<br /> |-<br /> |No floor travel empty or loaded-all other functions work properly.<br /> |1. Extractor arm off center-left to right.<br /> 2. Proximity switch or sensing bracket out of target range.<br /> <br /> 3. Proximity switch defective or broken.<br /> <br /> 4. Bad solenoid coil on floor cutout valve.<br /> <br /> 5. Spool on floor cutout valve stuck open.<br /> |1. Center arm.<br /> 2. Adjust as needed to achieve 1/4” clearance.<br /> <br /> 3. Check switch and replace.<br /> <br /> 4. Check solenoid and replace if needed.<br /> <br /> 5. Remove and clean spool cartridge or replace.<br /> |-<br /> |Floor travel moves but is sluggish<br /> and stalls with a load at certain points.<br /> |1. Uneven floor conditions. High/low spots.<br /> 2. Excessive tire wear.<br /> <br /> 3. Wheel shaft-to-motor shaft coupling on drive wheel assembly loose or broken.<br /> <br /> 4. Debris lodged under battery extractor.<br /> |1. Check flatness of floor. Check guidance track for scraping of guide arm on top of angle.<br /> 2. Measure under clearance of battery extractor. Should be no less than 5/8” replace poly wheels as needed.<br /> <br /> 3. Inspect drive assembly while under load to see if shafts and couplings are moving in unison. Repair as needed.<br /> <br /> 4. Inspect under unit and remove debris.<br /> |-<br /> |Inner carriage bounces while lifting under load,<br /> but not when empty.<br /> |1. Down speed adjustment valve open too far.<br /> |1. Adjust as needed to eliminate carriage bounce.<br /> |-<br /> |Inner carriage does not lift evenly.<br /> Four corners do not land evenly against outer frame tube.<br /> |1. Equalization chains are out of adjustment.<br /> 2. Excessive chain or sprocket wear.<br /> <br /> 3. Equalization chains are out of synchronization. Possibly may have jumped a sprocket tooth.<br /> <br /> 4. Broken bearing housing on mounted shaft.<br /> <br /> 5. Lift cylinder roping chains out of adjustment.<br /> |1. Readjust with the top stud until equal tension is achieved.<br /> 2. Replace as needed.<br /> <br /> 3. Evaluate and resynchronize as required.<br /> <br /> 4. Inspect and replace.<br /> <br /> 5. Readjust as needed to equal tension on all four cylinders in full down position.<br /> |}<br /> =&lt;big&gt;Aftermarket Support&lt;/big&gt;=<br /> [https://na.bhs1.com/blog/post/tt-922-technical-support Click here] for details on BHS' Aftermarket Support.<br /> =&lt;big&gt;Statement of Warranty&lt;/big&gt;=<br /> [https://store.bhs1.com/warranty Click here] for details on BHS' Statement of Warranty.</div>

Kperrier https://tech.bhs1.com/index.php?title=File:BE-TS_Operator%27s_Daily_Checklist.png&diff=7659 2024-03-13T20:38:22Z

<p>Kperrier: </p> <hr /> <div>BE-TS Operator's Daily Checklist</div>

Kperrier https://tech.bhs1.com/index.php?title=(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)&diff=7658 2024-03-13T20:33:35Z

<p>Kperrier: Added section 6</p> <hr /> <div>'''Looking for a specific replacement part?''' Ctrl-F (or Command-F for Mac users) brings up your browsers search panel and can search any text on the entire web page. Find parts by searching a part # or part description.<br /> <br /> '''Register your equipment with [https://na.bhs1.com/media-library/bhs-optima/ BHS Optima], BHS's free app.'''<br /> <br /> '''California Residents''': WARNING: This product contains chemicals known to the State of California to cause cancer and/or reproductive harm, and birth defects or other reproductive harm. [https://na.bhs1.com/about-bhs/compliance-statement-for-california-proposition-65/ Learn more here.]<br /> =&lt;big&gt;Preface&lt;/big&gt;=<br /> =&lt;big&gt;TP-606 – Safety &amp; De-Energization Procedures&lt;/big&gt;=<br /> ==&lt;big&gt;General Safety&lt;/big&gt;==<br /> {|<br /> |[[File:Read Before Operating Notice.png|alt=Read Before Operating|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:Read_Before_Operating_Notice.png]]<br /> |<br /> *Read and understand all instructions and warnings before using or servicing this equipment.<br /> *Keep these instructions for future reference.<br /> |}<br /> *Battery Extractor (BE) units shall only be operated by suitable persons of at least 18 years of age, who have been trained in the proper and safe operation of the BE and expressly certified/charged, in writing, by the user or their representative.<br /> *Only one person is permitted to travel on the BE at any time.<br /> *BE units shall only be used indoors in an industrial setting on a hard, nonslip, and level floor without defects including but not limited to holes, gouges, cracks, drains or obstacles comprised of concrete or other suitable industrial material meeting the minimum requirements specified by BHS as well as any local requirements.<br /> *A licensed structural engineer should be consulted prior to installing a BE on any building level other than the ground floor.<br /> *BE units are not designed to be shipped or transported after initial delivery.<br /> *Failure to follow these instructions and warnings may result in property damage, personal injury or death.<br /> ===&lt;big&gt;&lt;u&gt;Work Area&lt;/u&gt;&lt;/big&gt;===<br /> *Keep work area clean and well lit. Cluttered work areas and poor lighting can lead to accidents.<br /> *Clean up/contain any fluid spills immediately to prevent slips or falls.<br /> *Be aware of potential hazards when performing any service or maintenance to the unit.<br /> ===&lt;big&gt;&lt;u&gt;Service &amp; Maintenance&lt;/u&gt;&lt;/big&gt;===<br /> Service personnel shall wear Personal Protective Equipment (PPE) appropriate for the task being performed.<br /> {|<br /> |[[File:Electrical Hazard Warning.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Electrical_Hazard_Warning.png]]<br /> [[File:Danger Warning.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Danger_Warning.png|alt=DANGER]]<br /> |<br /> ===&lt;big&gt;&lt;u&gt;Lockout/Tagout&lt;/u&gt;&lt;/big&gt;===<br /> '''Lockout/tagout the BE per your corporate policy, if damaged or not functioning properly. Lockout/tagout and de-energize all systems prior to performing any maintenance or service to unit.'''<br /> |}<br /> {|<br /> |[[File:Warning-Battery-Explosion.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Warning-Battery-Explosion.png]]<br /> [[File:Danger Warning.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Danger_Warning.png|alt=DANGER]]<br /> |<br /> ===&lt;big&gt;&lt;u&gt;Lead-Acid Battery Explosion Hazard&lt;/u&gt;&lt;/big&gt;===<br /> '''DO NOT allow open flames or sparks of any kind near a battery. Highly explosive gas is generated when charging a battery that can remain in battery cells for extended periods of time after charging is complete.'''<br /> *Always wear appropriate PPE including rubber apron, gloves, boots and full face shield when performing service or maintenance to any lead-acid batteries.<br /> *DO NOT place metal or other conductive objects on top of battery. Arcing may occur causing damage to the battery and/or serious personal injury or death.<br /> *Use only chargers matching the voltage and amperage of the battery being charged. Overcharging a battery can cause damage to the battery, charger and/or serious personal injury or death.<br /> *Turn off charger before disconnecting battery from charger. Arcing between battery and charger connectors can cause damage to the connectors and/or serious personal injury or death.<br /> |}<br /> {|<br /> |[[File:Warning-Hydrualic-Hazard.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Warning-Hydrualic-Hazard.png]]<br /> [[File:Warning.png|alt=WARNING|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Warning.png]]<br /> |<br /> ===&lt;big&gt;&lt;u&gt;Hydraulic Hazards&lt;/u&gt;&lt;/big&gt;===<br /> '''AVOID HIGH PRESSURE FLUIDS-Escaping fluid under pressure can penetrate the skin causing serious injury. Relieve pressure before disconnecting hydraulic lines. Tighten all connections before applying pressure. Keep hands and body away from pin holes which eject fluids under high pressure. Use a piece of cardboard or paper to search for leaks. DO NOT use your hand.'''<br /> <br /> '''Any fluid injected into the skin under high pressure should be considered a serious medical emergency despite an initial normal appearance of the skin. There will be a delayed onset of pain, and serious tissue damage may occur. Medical attention should be sought immediately.'''<br /> |}<br /> {|<br /> ![[File:No Pacemakers Notice.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:No_Pacemakers_Notice.png]][[File:Strong Magnet Field Hazard Warning.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Strong_Magnet_Field_Hazard_Warning.png]]<br /> [[File:Warning.png|alt=WARNING|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Warning.png]]<br /> |<br /> ===&lt;big&gt;&lt;u&gt;Electromagnet Hazard&lt;/u&gt;&lt;/big&gt;===<br /> '''Units equipped with magnetic extraction generate strong magnetic fields. Persons with pacemakers &lt;u&gt;SHOULD&lt;/u&gt;''' &lt;u&gt;'''NOT'''&lt;/u&gt; '''operate or be in close proximity to equipment during operation.'''<br /> <br /> '''Failure to comply with this direction''' '''could result in serious personal injury or death.'''<br /> |}<br /> ===&lt;big&gt;&lt;u&gt;Operational Safety&lt;/u&gt;&lt;/big&gt;===<br /> *Only personnel trained in the proper and safe operation of BE units may operate or service the BE.<br /> *Operators shall wear appropriate PPE suitable for working with industrial lead-acid batteries while operating the BE ''(See [https://tech.bhs1.com/index.php/(BE-SL_%26_-DS)_Single_Level_%26_Double_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-400)#Lead-Acid_Battery_Explosion_Hazard Lead-Acid Battery Explosion Hazard] section).''<br /> *All data plates, warning labels, placards, etc. shall be in place and legible at all times. Contact BHS for re-placement data plates, warning labels, placards or instructions.<br /> *All users and service personnel shall be familiar with the meaning and risks associated with all data plates, warning labels, etc.<br /> *All operators and service personnel shall be aware of potential crush and shear points while operating or servicing the BE.<br /> *Keep hands and arms inside the operator compartment while operating the BE.<br /> *Remove BE from service if damaged, defective, or operating improperly (or becomes such while operating) until repairs can be made to correct any problem(s).<br /> *All operators shall be aware of the location of the end stops in the travel path to prevent driving the BE into the end stops.<br /> ===&lt;u&gt;&lt;big&gt;Do's and Don'ts&lt;/big&gt;&lt;/u&gt;===<br /> *'''DO NOT''' exceed the maximum capacity of the BE.<br /> *'''DO NOT''' modify or fit the BE with attachments without prior, written approval from BHS.<br /> *'''DO NOT''' perform any maintenance or service to the BE with a battery loaded on the BE.<br /> *'''DO NOT''' allow anyone to ride in or on the BE.<br /> *'''DO NOT''' operate the BE with any guard or cover removed unless required for maintenance or repair.<br /> *Disconnect the BE from all power sources before attempting to perform service or maintenance to the unit.<br /> *'''DO NOT''' drive the BE into the end stops.<br /> *'''DO NOT''' operate the BE if disengaged from the guidance track.<br /> *'''DO NOT''' allow a battery to exit the BE when a lift truck or battery stand is not present to accept the battery.<br /> *'''DO NOT''' rotate the arm onto a battery such that any part of the extractor arm, vacuum cup or magnet contacts the top of the battery.<br /> *'''DO NOT''' allow anyone to enter the area under the carriage without the service stands properly installed.<br /> *'''DO NOT''' use the BE in a manner for which it is not intended. Some examples of prohibited use are but not limited to:<br /> **To transport people<br /> **As a vehicle jack<br /> **To lift loads greater than its rated load capacity<br /> **Where unintentional movement may exist<br /> **Having direct contact with foodstuffs<br /> **In a potentially explosive atmosphere<br /> ==&lt;big&gt;De-Energization&lt;/big&gt;==<br /> 1. Fully lower the BE roller bed or position the roller bed on service stands if service requires the bed be raised. See Figures 1 &amp; 2.<br /> {|<br /> |[[File:WARNING-warn.png|alt=WARNING|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:WARNING-warn.png]]<br /> !Failure to properly support the roller bed when performing service under the BE could result in injury from the roller bed lowering unexpectedly.<br /> |}[[File:IOP-400 BE-SL&amp;DS (10-23) Fully Lower BE Roller Bed.png|alt=Fully lowered BE roller bed|none|thumb|FIGURE 1|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Fully_Lower_BE_Roller_Bed.png]][[File:IOP-400 BE-SL&amp;DS (10-23) BE Roller Bed on Service Stands .png|alt=Raised BE roller bed positioned on service stands|none|thumb|FIGURE 2|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_BE_Roller_Bed_on_Service_Stands_.png]]2. Turn key on dashboard to the “OFF” position. See Figure 3.[[File:IOP-400 BE-SL&amp;DS (10-23) De-Energization Figure 3.png|alt=Key on BE dashboard turned to the “OFF” position.|none|thumb|FIGURE 3|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_De-Energization_Figure_3.png]]3. Disconnect power to the extractor or shut off the electrical branch circuit breaker.<br /> {|<br /> |[[File:Danger Warning.png|alt=DANGER|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Danger_Warning.png]]<br /> |'''Failure to disconnect electrical power to the BE could result in electrical shock. Serious personal injury or death will occur.'''<br /> |}4. Actuate all hydraulic levers in both directions to re-lease any stored hydraulic pressure. See Figure 4.<br /> {|<br /> |[[File:WARNING-warn.png|alt=WARNING|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:WARNING-warn.png]]<br /> |'''Failure to release any stored hydraulic pres-sure could result in injury from:'''<br /> *'''Escaping hydraulic fluid under high pressure (see ''[https://tech.bhs1.com/index.php/(BE-SL_%26_-DS)_Single_Level_%26_Double_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-400)#Operational_Safety HYDRAULIC HAZARDS]'' in the ''[https://tech.bhs1.com/index.php/(BE-SL_%26_-DS)_Single_Level_%26_Double_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-400)#General_Safety GENERAL SAFETY]'' section).'''<br /> *'''Unexpected movement of hydraulic components.'''<br /> |}[[File:IOP-400 BE-SL&amp;DS (10-23) Actuate all Hydraulic Levers in Both Directions.png|alt=Actuate all hydraulic levers in both directions to release any stored hydraulic pressure.|none|thumb|FIGURE 4|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Actuate_all_Hydraulic_Levers_in_Both_Directions.png]]<br /> ==&lt;big&gt;Labels &amp; Placards&lt;/big&gt;==<br /> '''Operators should be familiar with the meaning of the following labels and placards found on the BE to ensure proper and safe operation.'''<br /> {| class=&quot;wikitable&quot;<br /> |-<br /> ![[File:Read Before Operating Notice.png|alt=Read Before Operating|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Read_Before_Operating_Notice.png]]<br /> |'''Read and understand instruction manual prior to use.'''<br /> |-<br /> ![[File:Lockout-Before-Servicing-Notice.png|alt=Lockout Before Servicing Unit|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Lockout-Before-Servicing-Notice.png]]<br /> |'''Lockout before servicing.'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Extractor Arm Positioning Arrows.png|alt=BE-SL &amp; BE-DS Extractor Arm Positioning Arrows|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Extractor_Arm_Positioning_Arrows.png]]<br /> |'''Extractor arm positioning arrows'''<br /> |-<br /> ![[File:Do Not Operate Without Guards or Covers Notice.png|alt=DO NOT Operate Without Guards or Covers Notice|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Do_Not_Operate_Without_Guards_or_Covers_Notice.png]]<br /> |'''DO NOT operate with guards or covers removed'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) No Riders Allowed.png|alt=No riders allowed|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_No_Riders_Allowed.png]]<br /> |'''NO riders allowed.'''<br /> |-<br /> ![[File:No Pacemakers Notice.png|alt=DO NOT operate by or in close proximity to people with pacemakers.|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:No_Pacemakers_Notice.png]]<br /> |'''DO NOT operate by or in close proximity to people with pacemakers.'''<br /> |-<br /> ![[File:Strong Magnet Field Hazard Warning.png|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Strong_Magnet_Field_Hazard_Warning.png]]<br /> [[File:Warning.png|alt=WARNING|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Warning.png]]<br /> |'''Strong Magnet Field Hazard'''<br /> *Attraction between magnet and metallic objects can crush.<br /> *Keep unsecured metallic objects away from magnet.<br /> *De-energize and lockout/tagout before servicing.<br /> |-<br /> ![[File:Chain Entanglement Hazard Warning.png|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Chain_Entanglement_Hazard_Warning.png]]<br /> [[File:Warning.png|alt=WARNING|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Warning.png]]<br /> |'''Chain Entanglement Hazard'''<br /> *Moving chains and sprockets can crush and cut.<br /> *Keep hands and fingers clear. Do not operate with guards removed.<br /> *De-energize and lockout/tagout before servicing.<br /> |-<br /> ![[File:Electrical Hazard Warning.png|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Electrical_Hazard_Warning.png]]<br /> [[File:Danger Warning.png|alt=DANGER|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Danger_Warning.png]]<br /> |'''Electrical Hazard'''<br /> *Energized components can cause electrical shock.<br /> *De-energize and lockout/tagout before servicing.<br /> |-<br /> ![[File:BE-SL and BE-DS Power Off-On.png|alt=BE-SL and BE-DS Power Off-On|frameless|180x180px|link=https://tech.bhs1.com/index.php/File:BE-SL_and_BE-DS_Power_Off-On.png]]<br /> |'''Power Off/On'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Horn Control.png|alt=BE-SL and BE-DS Horn Control |frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Horn_Control.png]]<br /> |'''Horn (If equipped)'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Vacuum Control.png|alt=BE-SL and BE-DS Vacuum Control |frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Vacuum_Control.png]]<br /> |'''Vacuum Off/On (If equipped)'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Magnet Extraction.png|alt=BE-SL and BE-DS Magnet Off/On|frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Magnet_Extraction.png]]<br /> |'''Magnet Off/On (If equipped)'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Powered Roller Cut Off Override.png|alt=BE-SL and BE-DS Powered Roller Cut Off Override|frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Powered_Roller_Cut_Off_Override.png]]<br /> |'''Powered Roller Cutout Override (If equipped)'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Rack-Level-Assist.png|alt=BE-SL and BE-DS Rack Level Assist |frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Rack-Level-Assist.png]]<br /> |'''Rack Level Assist Indicator (If equipped)'''<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> ! rowspan=&quot;3&quot; |[[File:IOP-400_BE-SL&amp;DS_(10-23)_Power_Rollers_and_Arm_Travel.png.png|alt=BE-SL &amp; DS Powered Roller and Arm Travel Controls|frameless|504x504px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Power_Rollers_and_Arm_Travel.png.png]]<br /> |'''Far Power Rollers'''<br /> |-<br /> |'''Arm Travel'''<br /> |-<br /> |'''Near Power Rollers'''<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> |+''BE-SL &amp; DS UNITS ONLY''<br /> ! colspan=&quot;3&quot; |[[File:IOP-400 BE-SL&amp;DS (10-23) BE-SL&amp;DS Units Platform Controls.png|alt=BE-SL &amp; DS Specific Controls|frameless|460x460px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_BE-SL&amp;DS_Units_Platform_Controls.png]]<br /> |-<br /> |Drive Forward/Reverse<br /> |Platform Raise/Lower<br /> |Arm Rotation Near/Far<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> |+''BE-TS &amp; QS UNITS ONLY''<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) BE-TS &amp; BE-QS Platform Raise and Lower Controls.png|alt=BE-TS &amp; BE-QS Platform Raise and Lower Controls|frameless|240x240px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_BE-TS_&amp;_BE-QS_Platform_Raise_and_Lower_Controls.png]]<br /> ! colspan=&quot;2&quot; |[[File:IOP-400 BE-SL&amp;DS (10-23)BE-TS &amp; BE-QS Specific Controls.png|alt=BE-TS &amp; BE-QS Specific-Controls|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)BE-TS_&amp;_BE-QS_Specific_Controls.png]]<br /> |-<br /> |Platform Raise/Lower<br /> |Drive Foward/Reverse<br /> |Arm Rotation Near/Far<br /> |}<br /> =&lt;big&gt;General Information&lt;/big&gt;=<br /> ==&lt;big&gt;Specification Data&lt;/big&gt;==<br /> [[File:BE-TS Specification Data.png|alt=IOP-401 BE-TS (10-23) Specification Data|frameless|600x600px]]<br /> {| class=&quot;wikitable&quot;<br /> | colspan=&quot;2&quot; |<br /> !BE-24-2-TS<br /> !BE-36-2-TS<br /> !BE-42-2-TS<br /> |-<br /> !A<br /> |Overall Length<br /> |156.5&quot;<br /> |180.5&quot;<br /> |192.5&quot;<br /> |-<br /> !B<br /> |Overall Width<br /> |72&quot;<br /> |72&quot;<br /> |72&quot;<br /> |-<br /> !C<br /> |Overall Height (Lowered)<br /> |158.188&quot;<br /> |158.188&quot;<br /> |160.688&quot;<br /> |-<br /> !<br /> |Overall Height (Raised w/ Overhead Guard)<br /> |182.375&quot;<br /> |182.375&quot;<br /> |182.375&quot;<br /> |-<br /> !<br /> |Overall Height (Raised w/ Strobe &amp; Alarm)<br /> |191.75&quot;<br /> |191.75&quot;<br /> |191.75&quot;<br /> |-<br /> !D<br /> |Wheel Base<br /> |98&quot;<br /> |122&quot;<br /> |134&quot;<br /> |-<br /> !E<br /> |Drive Wheel Center line<br /> |51&quot;<br /> |51&quot;<br /> |51&quot;<br /> |-<br /> !F<br /> |Battery Compartment Width<br /> |24&quot;<br /> |36&quot;<br /> |42&quot;<br /> |-<br /> !G<br /> |Ground Clearance<br /> |.625&quot;<br /> |.625&quot;<br /> |.625&quot;<br /> |-<br /> !H<br /> |Minimum Roller Height<br /> |6.5&quot;<br /> |6.5&quot;<br /> |6.5&quot;<br /> |-<br /> !I<br /> |Maximum Roller Height<br /> |96&quot;<br /> |96&quot;<br /> |96&quot;<br /> |-<br /> !J<br /> |Operator Platform Height (Lowered/Raised)<br /> |11&quot; / 103&quot;<br /> |11&quot; / 103&quot;<br /> |11&quot; / 103&quot;<br /> |}<br /> <br /> === UNITS WITH 10 HP POWER UNIT USED PRIOR TO DECEMBER, 2014 ===<br /> {| class=&quot;wikitable&quot;<br /> !<br /> !BE-24-2-TS<br /> !BE-36-2-TS<br /> !BE-42-2-TS<br /> |-<br /> |Travel Speed<br /> |0 to 190 ft/min / 0 to 0.97 m/s<br /> |0 to 190 ft/min / 0 to 0.97 m/s<br /> |0 to 190 ft/min / 0 to 0.97 m/s<br /> |-<br /> |Raise - Lower Speed<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |-<br /> |Powered Roller Speed<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |-<br /> |Arm Traverse Speed<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |-<br /> |Arm Rotation Time<br /> |6 s to 8 s<br /> |6 s to 8 s<br /> |6 s to 8 s<br /> |-<br /> |Draw Bar Pull / Vacuum<br /> <br /> (12&quot; / 305 mm Round Cup)<br /> |1,000 lb / 454 kg<br /> |1,000 lb / 454 kg<br /> |1,000 lb / 454 kg<br /> |-<br /> |Draw Bar Pull Magnet*<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |-<br /> |Vacuum Attach Time<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |-<br /> |Vacuum Release Time<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |-<br /> |Input Voltage<br /> |480 V / 3 ph / 60Hz<br /> |480 V / 3 ph / 60Hz<br /> |480 V / 3 ph / 60Hz<br /> |-<br /> |AC Current Draw<br /> |16.5 A<br /> |16.5 A<br /> |16.5 A<br /> |-<br /> |Control Circuit Voltage<br /> |120 V ac<br /> |120 V ac<br /> |120 V ac<br /> |-<br /> |Hydraulic Power Unit<br /> |10 hp / 7.46 kW<br /> |10 hp / 7.46 kW<br /> |10 hp / 7.46 kW<br /> |-<br /> |Hydraulic Pump<br /> |16 gal/min / 61 L/min<br /> |16 gal/min / 61 L/min<br /> |16 gal/min / 61 L/min<br /> |-<br /> |Power Unit<br /> |Hydraulic, Variable Displacement<br /> |Hydraulic, Variable Displacement<br /> |Hydraulic, Variable Displacement<br /> |-<br /> |Operating Pressure<br /> |1,500 psi / 103 bar<br /> |1,500 psi / 103 bar<br /> |1,500 psi / 103 bar<br /> |-<br /> |Vacuum Pump<br /> |1/3 hp / 0.25 kW<br /> |1/3 hp / 0.25 kW<br /> |1/3 hp / 0.25 kW<br /> |-<br /> |Vacuum<br /> |21&quot; Hg / 711 mbar<br /> |21&quot; Hg / 711 mbar<br /> |21&quot; Hg / 711 mbar<br /> |-<br /> |Full Load Capacity<br /> |10,000 lb / 4535 kg<br /> |10,000 lb / 4535 kg<br /> |10,000 lb / 4535 kg<br /> |-<br /> |Weight (Empty)<br /> |8,000 lb / 3629 kg<br /> |8,300 lb / 3765 kg<br /> |8,600 lb / 3901 kg<br /> |-<br /> |Total Compartment Rollers / Powered<br /> |11/5<br /> |11/5<br /> |11/5<br /> |-<br /> |Guide Track<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |-<br /> |Overall Dimensions (L x W x H)<br /> |156.5&quot; x 72&quot; x 158.188&quot;<br /> <br /> 3975 mm x 1829 mm x 4018 mm<br /> |180.5&quot; x 72&quot; x 158.188&quot;<br /> <br /> 4585 mm x 1829 mm x 4018 mm<br /> |192.5&quot; x 72&quot; x 160.688&quot;<br /> <br /> 4890 mm x 1829 mm x 4081 mm<br /> |-<br /> |Vacuum Arm Reach<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |-<br /> |Vacuum Arm Reach (Hydraulic Extension)<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |-<br /> |Magnet Arm Reach (Hydraulic Extension) Truck Side<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |-<br /> |Wheel Base<br /> |98&quot; / 2489 mm<br /> |122&quot; / 3099 mm<br /> |134&quot; / 3404 mm<br /> |-<br /> |Drive Wheel Center Line<br /> |51&quot; / 1295 mm<br /> |51&quot; / 1295 mm<br /> |51&quot; / 1295 mm<br /> |-<br /> |Battery Compartment Width<br /> |24&quot; / 610 mm<br /> |36&quot; / 915 mm<br /> |42&quot; / 1067 mm<br /> |-<br /> |Maximum Battery Dimensions<br /> <br /> (L x W x H)<br /> |48&quot; x 23&quot; x 34&quot;<br /> <br /> 1219 mm x 584 mm x 864 mm<br /> |48&quot; x 35&quot; x 34&quot;<br /> <br /> 1219 mm x 889 mm x 864 mm<br /> |48&quot; x 41&quot; x 34&quot;<br /> <br /> 1219 mm x 1041 mm x 864 mm<br /> |-<br /> |Minimum Battery Width<br /> <br /> (with vacuum / magnet)<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |-<br /> |Minimum Battery Height<br /> |17.75&quot; / 451 mm<br /> |17.75&quot; / 451 mm<br /> |17.75&quot; / 451 mm<br /> |-<br /> |Ground Clearance<br /> |0.63&quot; / 16 mm<br /> |0.63&quot; / 16 mm<br /> |0.63&quot; / 16 mm<br /> |-<br /> |Roller Height<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |-<br /> ! colspan=&quot;4&quot; |NOTES<br /> |-<br /> | colspan=&quot;4&quot; |''Specifications may vary ± 5% because of temperature, floor considerations, and operator efficiency. Values represented under normal operating conditions.''<br /> |-<br /> | colspan=&quot;4&quot; |''* Varies with battery case thickness and condition.''<br /> |}<br /> <br /> === UNITS WITH 20 HP POWER UNIT USED DECEMBER, 2014 TO PRESENT ===<br /> {| class=&quot;wikitable&quot;<br /> !<br /> !BE-24-2-TS<br /> !BE-36-2-TS<br /> !BE-42-2-TS<br /> |-<br /> |Travel Speed<br /> |0 to 240 ft/min / 0 to 1.22 m/s<br /> |0 to 240 ft/min / 0 to 1.22 m/s<br /> |0 to 240 ft/min / 0 to 1.22 m/s<br /> |-<br /> |Raise - Lower Speed<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |-<br /> |Powered Roller Speed<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |-<br /> |Arm Traverse Speed<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |-<br /> |Arm Rotation Time<br /> |6 s to 8 s<br /> |6 s to 8 s<br /> |6 s to 8 s<br /> |-<br /> |Draw Bar Pull / Vacuum<br /> <br /> (12&quot; / 305 mm Round Cup)<br /> |1,000 lb / 454 kg<br /> |1,000 lb / 454 kg<br /> |1,000 lb / 454 kg<br /> |-<br /> |Draw Bar Pull Magnet*<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |-<br /> |Vacuum Attach Time<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |-<br /> |Vacuum Release Time<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |-<br /> |Input Voltage<br /> |480 V / 3 ph / 60Hz<br /> |480 V / 3 ph / 60Hz<br /> |480 V / 3 ph / 60Hz<br /> |-<br /> |AC Current Draw<br /> |35 A<br /> |35 A<br /> |35 A<br /> |-<br /> |AC Current Draw w/ Electric Drive Option<br /> |42 A<br /> |42 A<br /> |42 A<br /> |-<br /> |Control Circuit Voltage<br /> |120 V ac<br /> |120 V ac<br /> |120 V ac<br /> |-<br /> |Hydraulic Power Unit<br /> |20 hp / 14.9 kW<br /> |20 hp / 14.9 kW<br /> |20 hp / 14.9 kW<br /> |-<br /> |Hydraulic Power Unit w/ Electric Drive Option<br /> |25 hp / 18.7 kW<br /> |25 hp / 18.7 kW<br /> |25 hp / 18.7 kW<br /> |-<br /> |Hydraulic Pump<br /> |22 gal/min / 83 L/min<br /> |22 gal/min / 83 L/min<br /> |22 gal/min / 83 L/min<br /> |-<br /> |Power Unit<br /> |Hydraulic, Variable Displacement<br /> |Hydraulic, Variable Displacement<br /> |Hydraulic, Variable Displacement<br /> |-<br /> |Operating Pressure<br /> |1,500 psi / 103 bar<br /> |1,500 psi / 103 bar<br /> |1,500 psi / 103 bar<br /> |-<br /> |Vacuum Pump<br /> |1/3 hp / 0.25 kW<br /> |1/3 hp / 0.25 kW<br /> |1/3 hp / 0.25 kW<br /> |-<br /> |Vacuum<br /> |21&quot; Hg / 711 mbar<br /> |21&quot; Hg / 711 mbar<br /> |21&quot; Hg / 711 mbar<br /> |-<br /> |Full Load Capacity<br /> |10,000 lb / 4535 kg<br /> |10,000 lb / 4535 kg<br /> |10,000 lb / 4535 kg<br /> |-<br /> |Weight (Empty)<br /> |8,000 lb / 3629 kg<br /> |8,300 lb / 3765 kg<br /> |8,600 lb / 3901 kg<br /> |-<br /> |Total Compartment Rollers / Powered<br /> |11/5<br /> |11/5<br /> |11/5<br /> |-<br /> |Guide Track<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |-<br /> |Overall Dimensions (L x W x H)<br /> |156.5&quot; x 72&quot; x 158.188&quot;<br /> <br /> 3975 mm x 1829 mm x 4018 mm<br /> |180.5&quot; x 72&quot; x 158.188&quot;<br /> <br /> 4585 mm x 1829 mm x 4018 mm<br /> |192.5&quot; x 72&quot; x 160.688&quot;<br /> <br /> 4890 mm x 1829 mm x 4081 mm<br /> |-<br /> |Vacuum Arm Reach<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |-<br /> |Vacuum Arm Reach (Hydraulic Extension)<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |-<br /> |Magnet Arm Reach (Hydraulic Extension) Truck Side<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |-<br /> |Wheel Base<br /> |98&quot; / 2489 mm<br /> |122&quot; / 3099 mm<br /> |134&quot; / 3404 mm<br /> |-<br /> |Drive Wheel Center Line<br /> |51&quot; / 1295 mm<br /> |51&quot; / 1295 mm<br /> |51&quot; / 1295 mm<br /> |-<br /> |Battery Compartment Width<br /> |24&quot; / 610 mm<br /> |36&quot; / 915 mm<br /> |42&quot; / 1067 mm<br /> |-<br /> |Maximum Battery Dimensions<br /> <br /> (L x W x H)<br /> |48&quot; x 23&quot; x 34&quot;<br /> <br /> 1219 mm x 584 mm x 864 mm<br /> |48&quot; x 35&quot; x 34&quot;<br /> <br /> 1219 mm x 889 mm x 864 mm<br /> |48&quot; x 41&quot; x 34&quot;<br /> <br /> 1219 mm x 1041 mm x 864 mm<br /> |-<br /> |Minimum Battery Width<br /> <br /> (with vacuum / magnet)<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |-<br /> |Minimum Battery Height<br /> |17.75&quot; / 451 mm<br /> |17.75&quot; / 451 mm<br /> |17.75&quot; / 451 mm<br /> |-<br /> |Ground Clearance<br /> |0.63&quot; / 16 mm<br /> |0.63&quot; / 16 mm<br /> |0.63&quot; / 16 mm<br /> |-<br /> |Roller Height<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |-<br /> ! colspan=&quot;4&quot; |NOTES<br /> |-<br /> | colspan=&quot;4&quot; |''Specifications may vary ± 5% because of temperature, floor considerations, and operator efficiency. Values represented under normal operating conditions.''<br /> |-<br /> | colspan=&quot;4&quot; |''* Varies with battery case thickness and condition.''<br /> |}<br /> ==&lt;big&gt;Pre-Installation Check&lt;/big&gt;==<br /> ===&lt;big&gt;&lt;u&gt;Floor Conditions&lt;/u&gt;&lt;/big&gt;===<br /> The floor is the single most critical area of the battery room.  A bad floor can cause significant issues with the installation as well as downtime and maintenance problems with the extractor.  The floor should be verified as to its minimum thickness and strength with user.  As noted on the drawing, the specific requirement of flatness for your particular type of system is listed. Below is a chart stating floor requirements.  If possible, especially on double stack and higher systems, a digital level should be used to shoot the grade for compliance with the specification.  The floor should also be inspected for severe cracks or excessively wide expansion joints in the travel path of the machine.  If floor drains are present, they must not have a grade to the opening that encroaches into the travel path. <br /> <br /> F-min is a rating method used to evaluate the flatness and levelness of a floor designated as &quot;defined travel path&quot;.  For example, an F-min rating of 60 means that there is no more than .129&quot; of variation in the transverse axis (wheels left to right) and .287&quot; variation in the longitudinal axis (front to back) on the equipment.<br /> <br /> To avoid potential damage to drive wheel assemblies, guide track, structural components, guide rollers  and issues with the inner frame equalization the &quot;defined travel path&quot; of the Battery Extractor should meet or exceed the recommended F-min specification. See chart below for the model specifications.<br /> {| class=&quot;wikitable&quot;<br /> !Model<br /> !F-Min<br /> !+/- Longitudinal<br /> !+/- Transverse<br /> !Slope Defect<br /> |-<br /> |SL, DS<br /> |40<br /> |.287&quot;<br /> |.192&quot;<br /> |.096&quot;<br /> |-<br /> |TS<br /> |60<br /> |.186&quot;<br /> |.129&quot;<br /> |.066&quot;<br /> |-<br /> |QS<br /> |85<br /> |.131&quot;<br /> |.091&quot;<br /> |.047&quot;<br /> |}[[File:IOP-400 BE-SL&amp;DS (10-23) Floor Conditions Pre-Installation Check.png|alt=BE-TS Floor Conditions Pre-Installation Check|frameless|500x500px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Floor_Conditions_Pre-Installation_Check.png]]<br /> ==&lt;big&gt;Operating Controls &amp; Instructions&lt;/big&gt;==<br /> <br /> === &lt;big&gt;&lt;u&gt;Operator Console&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Operator Console.png|alt=BE-TS Operator Console|frameless|1080x1080px]]<br /> <br /> '''''NOTE:''' Safety devices for the machine and the machine operating area SHALL NOT be rendered inoperable or misused.'' <br /> <br /> ''Typical BE-TS operator console shown above. Position of optional controls may vary from that shown depending on age of unit and/or combination of optional controls present.''<br /> <br /> ''HMI display standard on units shipped after February, 2020 for Industrial Internet of Things (IIoT) package.''<br /> <br /> ==== &lt;u&gt;&lt;big&gt;Safety Features&lt;/big&gt;&lt;/u&gt; ====<br /> &lt;u&gt;Key Switch&lt;/u&gt; – Located on the dash (see above).  Primary on/off switch to prevent unauthorized personnel from operating the BE.<br /> <br /> &lt;u&gt;Emergency Stop&lt;/u&gt; – Located on the dash (see above). Will stop all functions immediately, locking all hydraulics in place. To use, press down on the red button. The machine key must be used to reset the emergency stop.<br /> <br /> &lt;u&gt;Foot Switch&lt;/u&gt; – Must be depressed to operate the BE.  Stepping off the foot switch will stop all functions immediately, locking all hydraulics in place.  To resume use, depress the foot switch.<br /> <br /> &lt;u&gt;Gate Switch&lt;/u&gt; – The gate must be fully closed for the BE to operate.<br /> <br /> &lt;u&gt;Extractor Arm Switch&lt;/u&gt; – Does not permit the machine to move forward or backward unless the extractor arm is located in the center of the carriage between the indicating arrows located on the arm guard.<br /> <br /> &lt;u&gt;Powered Roller Cutout (PRC-1 or PRC-2) ''(if equipped)''&lt;/u&gt; – Disengages the powered roller function when the photo eye positioned on the edge of the BE battery compartment is disrupted by a battery, requiring additional input from the operator. Pressing the &quot;Power Roller Cutout&quot; override button (see above) on the dash will resume  powered roller operation when loading or unloading batteries from the BE carriage.<br /> <br /> &lt;u&gt;Horn ''(If equipped)''&lt;/u&gt; – Button located on the dash (see above).  Used to alert personnel before moving the BE.<br /> <br /> &lt;u&gt;Strobe Light ''(If equipped)''&lt;/u&gt; – Located on a vertical stanchion mounted to the right rear of the operator compartment. For units equipped with optional overhead guard (OHG), the beacon is located above of the operator compartment.  Beacon automatically flashes when the BE is switched on to visually notify the BE is in use.<br /> <br /> &lt;u&gt;Audible Alarm ''(if equipped)''&lt;/u&gt; – Mounted in the same location as the Strobe Light.  Automatically sounds when the BE is switched on to notify personnel that the BE is in use.<br /> <br /> &lt;u&gt;Blue Light ''(if equipped)''&lt;/u&gt; - Mounted at an elevated position on either end of the extractor which project a bright, highly concentrated blue beam pattern on the ground visually alerting personnel to the direction the extractor is moving.<br /> <br /> === &lt;big&gt;&lt;u&gt;Operation Overview&lt;/u&gt;&lt;/big&gt; ===<br /> <br /> * All operators should be familiar with the operator console of the extractor before performing any battery changes.  The controls of the console are simple and well marked.  It consists of six, manually operated, hydraulic control valves and a three position selector switch which controls the left and right vacuum cups (or optional magnets).<br /> * The operator shall make certain there are no persons or obstacles in the extractor path prior to traveling forward or reverse.<br /> * All manual valves are moved in the direction of the function travel which it controls with exception of the lift/lower valve, which is pulled toward the operator for &quot;up&quot; and pushed away for &quot;down.&quot;<br /> * In the event of any failure or malfunction, step off the dead-man switch or press the E-stop button and all functions will stop immediately, locking all hydraulics in place.<br /> * The extractor arm must be in the center of the carriage or the unit will not travel forward or reverse.<br /> * To ensure smooth operation, all valve movements should be made in a slow, deliberate motion.<br /> * Only one key should be provided to operate the extractor.<br /> * When leaving the machine, the operator shall turn off the key switch, remove the key and logout out of the IIoT (if equipped) to prevent unauthorized use<br /> * Ensure all the batteries and cables are properly stored in the battery stands prior to moving the BE.<br /> * The BE is designed to carry only one battery in each compartment on the carriage.<br /> * When loading the BE, position the batteries in the center of the compartments on the powered rollers to prevent any battery movement when transporting.<br /> * Ensure there are no projections outside of the carriage before moving the BE.<br /> <br /> === &lt;u&gt;&lt;big&gt;Operating Instructions&lt;/big&gt;&lt;/u&gt; ===<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Pre-Change Out Preparation&lt;/u&gt;&lt;/big&gt; ====<br /> 1. Position lift truck for change out in designated area.<br /> <br /> 2. Remove all battery restraints and disconnect battery cables following manufacturers guidelines.  (Be sure to position battery cables so as not to be damaged by the battery during change out.)<br /> <br /> 3. Board battery extractor and close safety gate.  (Gate must be fully closed or unit will not operate.)<br /> <br /> 4. Turn key switch to &quot;ON&quot; position. <br /> <br /> 5. Log in on the HMI display (if equipped with BE-IIoT package).<br /> <br /> 6. Depress foot pedal.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Discharged Battery Removal&lt;/u&gt;&lt;/big&gt; ====<br /> 1. Move extractor forward or reverse to position center of empty compartment with center of lift truck battery compartment. (Lead roller of extractor is equipped with a centering groove.  Users may find it beneficial to mark center of lift truck compartment to aid in alignment.)<br /> <br /> 2. Align extractor's roller compartment height with lift truck's battery compartment.<br /> <br /> 3. Rotate extractor arm into battery compartment aligned in Step 2.<br /> <br /> 4. Move extractor arm toward battery until vacuum cup/magnet contacts battery.<br /> <br /> [[File:NOTICE-warn.png|alt=NOTICE|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:NOTICE-warn.png]] '''DO NOT force cup/magnet into battery after initial contact with battery is made.'''<br /> <br /> 5. Energize vacuum/magnet by turning selector switch to proper direction, left or right.<br /> <br /> 6. Move extractor arm away from lift truck toward center of extractor roller bed, removing discharged battery.  (Battery should be pulled past first three idler rollers onto first or second powered roller.)<br /> <br /> 7. Turn off vacuum/magnet and move extractor arm away from battery 1&quot; to 2&quot;.<br /> <br /> 8. Rotate extractor arm out of battery compartment into opposite compartment (if empty) and center arm in carriage.<br /> <br /> 9. Move battery into center of compartment using powered rollers.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Charged Battery Retrieval&lt;/u&gt;&lt;/big&gt; ====<br /> 1. Locate charged battery for appropriate type of lift truck being changed.<br /> <br /> 2. Raise battery extractor roller compartment to proper level to gain access as needed to disconnect desired battery from its charger and disengage battery safety stop.<br /> <br /> [[File:WARNING-warn.png|alt=WARNING|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:WARNING-warn.png]] '''ALWAYS be sure charging has been completed and charger is not still charging battery. Dangerous sparking/arcing can occur if battery is unplugged from charger while charging.'''<br /> <br /> 3. Move extractor to appropriate rack position and align empty roller compartment with the center of the battery storage rack compartment.  ''(The battery safety stop of each compartment is the center of that compartment and should be used for alignment with the groove in the lead roller of the battery extractor compartment.'') <br /> <br /> 4. Rotate arm into empty compartment (if not already positioned there.)<br /> <br /> 5. Move extractor arm toward battery until vacuum cup/magnet contacts battery.<br /> <br /> 6. Energize vacuum cup/magnet by turning selector switch to proper direction, left or right.<br /> <br /> [[File:NOTICE-warn.png|alt=NOTICE|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:NOTICE-warn.png]] '''DO NOT force cup/magnet into battery after initial contact with battery is made.'''<br /> <br /> 7. Move extractor arm away from battery rack toward center of extractor roller bed, removing charged battery.  (Battery should be pulled past first three idler rollers onto first or second powered roller.)<br /> <br /> 8. Turn off vacuum/magnet and move extractor arm away from battery 1&quot; to 2&quot;.<br /> <br /> 9. Rotate extractor arm out of battery compartment into fully vertical position.<br /> <br /> 10. Move battery into center of compartment using powered rollers.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Discharged Battery Return&lt;/u&gt;&lt;/big&gt; ====<br /> 1. If required, adjust extractor compartment height to battery rack level with open battery compartment.  Drive extractor to align roller compartment containing discharged battery with open battery compartment.<br /> <br /> 2. Return discharged battery to battery rack using powered rollers.<br /> <br /> '''''NOTE:''''' ''In most instances, batteries can be deposited into battery racks in one motion using only powered rollers.  When this does not work, the battery may need slight assistance from extractor arm.  To do this, rotate arm into compartment such as one would if removing battery from rack.  If extractor is vacuum equipped, position top edge of cup slightly higher than edge of battery (or over lifting eye if so equipped) to prevent cup from adhering to battery - No vacuum/magnet is necessary for pushing. DO NOT activate vacuum/magnet switch.  Slowly push battery into rack until fully into compartment.''<br /> <br /> 3. Engage battery safety stop and connect battery to charger as required.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Charged Battery Installation&lt;/u&gt;&lt;/big&gt; ====<br /> 1. Lower extractor to fully lowered position.<br /> <br /> 2. Drive extractor back to lift truck and align roller compartment containing charged battery as performed in steps 1 and 2 of &quot;Discharged Battery Removal&quot;.<br /> <br /> 3. Move charged battery toward lift truck compartment by using powered rollers, verifying precise battery alignment.<br /> <br /> [[File:NOTICE-warn.png|alt=NOTICE|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:NOTICE-warn.png]] '''Many batteries are a tight fit into lift truck battery compartments. Care MUST be taken to ensure alignment is precise to avoid damage to battery, lift truck, and/or battery extractor.'''<br /> <br /> 4. Adjust extractor vertically as well as horizontally, if needed<br /> <br /> 5. Insert battery into lift truck as far as possible using only the powered rollers.<br /> <br /> 6. Rotate extractor arm into compartment and SLOWLY push battery into lift truck.  (Be sure to watch battery cables for interference.)<br /> <br /> 7. Return extractor arm to center of roller bed and lower extractor to fully lowered position.  Drive extractor out of immediate area.<br /> <br /> 8. Turn off key switch, remove key from switch, log out on the HMI display (if equipped with BE-IIoT package) and carefully exit extractor.<br /> <br /> 9. Secure newly installed battery in lift truck and reconnect battery cables.<br /> <br /> 10. Return lift truck to service<br /> {|<br /> ![[File:Caution-Warning.png|alt=CAUTION|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:Caution-Warning.png]]<br /> |'''DO NOT drive the BE into the travel path end stops. The end stops are designed to prevent the BE from accidentally traveling beyond its designated travel path. Driving the BE into the end stops will cause the BE to stop suddenly, possibly causing damage to the end stop, the BE and/or personal injury.'''<br /> |}<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Optional Powered Roller Cutout Operation&lt;/u&gt;&lt;/big&gt; ====<br /> Units equipped with optional Powered Roller Cutout, the powered roller override button must be depressed in addition to actuating the hydraulic valve when a battery disrupts the photo eye(s) at the edge of the battery compartments while using the powered rollers to transfer batteries on and off of the battery extractor.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;IIoT Equipped Units&lt;/u&gt;&lt;/big&gt; ====<br /> Units shipped after February, 2020 are equipped with BE-IIoT (Industrial Internet of Things) package. Operators must log in to the BE-IIoT system using the HMI (Human Machine Interface) display located on the dashboard to operate the extractor.<br /> <br /> When finished operating the extractor, the operator should log out of the BE-IIoT to prevent unauthorized access and/or operation of the extractor.<br /> <br /> == &lt;big&gt;Manual Unloading&lt;/big&gt; ==<br /> '''Lockout/tagout and de-energize all equipment prior to manually unloading any battery.'''<br /> <br /> In the event of power loss or an operational malfunction of the BE not allowing a battery to be unloaded using normal operating procedures, it is recommended a battery be removed from the BE using certified and approved vertical extraction methods and devices.<br /> {|<br /> |[[File:DANGER-warn.png|alt=DANGER|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:DANGER-warn.png]]<br /> |'''Read, understand and observe all safety warnings and procedures related to the vertical extraction device(s) being used.'''<br /> |}<br /> Should the status of the BE not allow for safe vertical extraction (due to position in the battery aisle or level of the inner carriage), only repairs required to safely maneuver the BE to a position allowing for safe vertical extraction should be made.  Once any batteries are safely unloaded, any remaining repairs can be made.<br /> {|<br /> |[[File:DANGER-warn.png|alt=DANGER|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:DANGER-warn.png]]<br /> |'''Extreme care should be taken when working under or around equipment supporting elevated loads. Unexpected movement of the equipment could cause the load and/or equipment to fall. ALWAYS be sure devices of adequate size and strength are in place to prevent any personnel working under the elevated load from being crushed. Serious personal injury or death will occur.'''<br /> |}<br /> <br /> == &lt;big&gt;Spare Parts List&lt;/big&gt; ==<br /> Use only BHS approved replacement parts.<br /> <br /> Refer to the appropriate Spare Parts Kit (vacuum equipped units - Pt# BE-SPKV-TS, magnet equipped units - Pt# BE-SPKM-TS) for the list of items recommended by BHS to have on hand for BE-TS models to minimize any downtime due to minor breakdowns that may occur under normal operating conditions.<br /> <br /> BHS offers many replacement parts kits containing relevant or related parts when replacing certain individual parts or replacing any obsolete / upgraded parts.<br /> <br /> BHS also offers a supplement hose kit (Pt# 80342003) which contains an assortment of hoses allowing any hose on the extractor to be replaced immediately with a temporary hose of equal length or longer. After the extractor is back up and running, the failed hose can be taken to have an exact replacement made. Once the new hose is made and installed, the temporary hose can be returned to the kit for future use.<br /> <br /> Go to [[www.bhs1.com]] and click &quot;Parts&quot; for all the latest parts kits and corresponding installation instructions (if applicable).<br /> <br /> BHS recommends that a full maintenance inspection report similar to the one provided be done at least once a month.<br /> <br /> Any parts found to be excessively worn or damaged should promptly be replaced unless said parts pose a safety risk to the operator and/or extractor, in which case the unit should be removed from service until the problem(s) are remedied (See<br /> <br /> Operator's Daily Checklist.)<br /> <br /> ''Note: Spare parts kits contain parts for the most current machine design/configuration. Due to continuous design and manufacturing updates and improvements, not all the parts in the spare parts kits may be compatible with older units. Consult factory when ordering spare or replacement parts for existing units in the field to ensure part compatibility.''<br /> <br /> = &lt;big&gt;Parts Sections&lt;/big&gt; =<br /> <br /> == &lt;big&gt;Chassis&lt;/big&gt; ==<br /> <br /> === &lt;big&gt;&lt;u&gt;Equalization Components&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Equalization Components.png|alt=BE-TS Chassis Equalization|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PT0222-1<br /> |LINK-CONNECTING-#60<br /> |<br /> |<br /> |8<br /> |-<br /> |2<br /> |HW0017<br /> |NUT-HEX-3/4-10<br /> |<br /> |<br /> |8<br /> |-<br /> |3<br /> |HW0115<br /> |WASHER-LOCK-3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |43097001<br /> |STUD-ANCHOR-5&quot;<br /> |<br /> |''Upper''<br /> |4<br /> |-<br /> |5<br /> |HW0020<br /> |NUT-JAM-3/4-10<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43097002<br /> |STUD-ANCHOR-2&quot;<br /> |<br /> |''Lower''<br /> |4<br /> |-<br /> |7<br /> |00158001-14<br /> |CHAIN-ROLLER-#60<br /> |<br /> |<br /> |4<br /> |}<br /> [[File:BE-TS Equalization Components - 1.0.2.png|alt=BE-TS Chassis Equalization 2|frameless|575x575px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PT0416<br /> |COLLAR-SHAFT-1 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |2<br /> |43097006<br /> |KEY-3/8&quot; X 2 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |PT0224<br /> |SPROCKET-60B12 X 1 1/2&quot;<br /> |<br /> |''Keyed in line''<br /> |8<br /> |-<br /> |4<br /> |PT0405<br /> |FLANGE BEARING-2 BOLT-1 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1 1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |6<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> | rowspan=&quot;4&quot; |7<br /> |43127001<br /> |SHAFT-EQUALIZATION-81.75&quot;<br /> |<br /> |''BE-24-2-TS''<br /> |2<br /> |-<br /> |43327001<br /> |SHAFT-EQUALIZATION-105.75&quot;<br /> |<br /> |''BE-36-2-TS''<br /> |2<br /> |-<br /> |44327001<br /> |SHAFT-EQUALIZATION-117.75&quot;<br /> |<br /> |''BE-42-2-TS''<br /> |2<br /> |-<br /> |44527001<br /> |SHAFT-EQUALIZATION-75.75&quot;<br /> |<br /> |''BE-42-1-TS''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |8<br /> |PT0503<br /> |BEARING-FLANGED LOAD-2 1/4&quot;<br /> |<br /> |''Used after December 2003''<br /> |8<br /> |-<br /> |43026001<br /> |BEARING-FLANGED LOAD-2 1/4&quot; ''(MACHINED)''<br /> |<br /> |''Used prior to December 2003''<br /> |8<br /> |-<br /> |9<br /> |HW0025<br /> |NUT-JAM-7/8-14<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0117<br /> |WASHER-LOCK-7/8&quot; ''(NOT SHOWN)''<br /> |<br /> |''Used prior to August 2002''<br /> |8<br /> |}<br /> <br /> === &lt;u&gt;'''&lt;big&gt;Bridge &amp; Cross Bar&lt;/big&gt;'''&lt;/u&gt; ===<br /> [[File:BE-TS Bridge and Cross Bar.png|alt=BE-TS Bridge and Cross Bar|frameless|524x524px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1 1/4&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |2<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |20<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |20<br /> |-<br /> |4<br /> |HW0515<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |''Fully Threaded''<br /> |8<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> === &lt;u&gt;'''&lt;big&gt;Lift Cylinder Connections&lt;/big&gt;'''&lt;/u&gt; ===<br /> [[File:BE-TS Lift Cylinder Connections.png|alt=BE-TS Lift Cylinder Connections|frameless|589x589px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |00158001-13<br /> |CHAIN-ROLLER-#80<br /> |<br /> |<br /> |4<br /> |-<br /> |2<br /> |HW0014<br /> |NUT-HEX-1-8<br /> |<br /> |<br /> |8<br /> |-<br /> |3<br /> |43897002<br /> |STUD-LIFT-INNER FRAME<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |PT0204<br /> |LINK-CONNECTING-#80<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |43897001<br /> |STUD-LIFT-OUTER FRAME<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43815018<br /> |BRACKET-CYLINDER SUPPORT<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |SS0761<br /> |U-BOLT-CYLINDER MOUNTING<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |12<br /> |-<br /> |9<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |10<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |8<br /> |-<br /> | rowspan=&quot;2&quot; |11<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |<br /> |''Idler caster end of unit'' <br /> |2<br /> |-<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |''Drive wheel end of unit'' <br /> |2<br /> |-<br /> |12<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |14<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |43822002<br /> |CLEVIS ASSEMBLY<br /> |<br /> |''Sold as assembly only''<br /> |4<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Guidance Arm&lt;/big&gt;&lt;/u&gt;''' ===<br /> [[File:BE-TS Guidance Arm.png|alt=BE-TS Guidance Arm|frameless|562x562px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> ! colspan=&quot;2&quot; |NO. REQ<br /> |-<br /> |1<br /> |43015011<br /> |GUIDE ARM WELDMENT, 2 ROLLER<br /> |<br /> |<br /> |2<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |2<br /> |43017025<br /> |SPACER-GUIDE ARM<br /> |<br /> |''† 1/2&quot; thick''<br /> |4<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |3<br /> |41215204<br /> |GUIDE ARM WELDMENT, 4 ROLLER<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |2<br /> |-<br /> |4<br /> |41217274<br /> |SPACER-GUIDE ARM<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |4<br /> |-<br /> |5<br /> |43012007<br /> |CAM ROLLER-1 3/4&quot;<br /> |<br /> |<br /> |4<br /> |8<br /> |-<br /> |6<br /> |HW0115<br /> |WASHER-LOCK-3/4&quot;<br /> |<br /> |<br /> |4<br /> |8<br /> |-<br /> |7<br /> |HW0011<br /> |NUT-HEX-3/4-16<br /> |<br /> |<br /> |4<br /> |8<br /> |-<br /> |8<br /> |HW0509<br /> |BOLT-HHCS-1/2-13 X 4-1/2&quot;<br /> |<br /> |<br /> |4<br /> |6<br /> |-<br /> |9<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |6<br /> |-<br /> |10<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |4<br /> |6<br /> |-<br /> |11<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |4<br /> |6<br /> |-<br /> |12<br /> |41215234<br /> |GUIDE ARM WELDMENT (POLY)<br /> |<br /> |<br /> |2<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |13<br /> |41217317<br /> |POLY SLIDE MOUNTING BLOCK<br /> |<br /> |<br /> |4<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |14<br /> |41217318<br /> |POLY SLIDE<br /> |<br /> |<br /> |4<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |15<br /> |HW0501<br /> |BOLT-HHCS-1/2-13 X 1&quot;<br /> |<br /> |<br /> |12<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |16<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |12<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |17<br /> |91253A546<br /> |BOLT FHSCS-1/4-20 X 1-1/2&quot;<br /> |<br /> |<br /> |8<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |18<br /> |HW0003<br /> |NUT-NILN-1/4-20<br /> |<br /> |<br /> |8<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> ! colspan=&quot;7&quot; |NOTES<br /> |-<br /> | colspan=&quot;7&quot; |''† Older units equipped with (1) 1&quot; thick spacer per guide arm bracket.'' <br /> |-<br /> | colspan=&quot;7&quot; |''†† Multiple styles of guide arms have been utilized on extractors. Refer to the parts diagrams for correct replacement parts.'' <br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Roller Bed Componenets&lt;/big&gt;&lt;/u&gt;''' ===<br /> ==== '''&lt;big&gt;''Idler Rollers''&lt;/big&gt;''' ====<br /> [[File:BE-TS Idler Rollers.png|alt=BE-TS Idler Rollers|frameless|746x746px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;3&quot; |1<br /> |43182001<br /> |LEAD ROLLER ASSEMBLY-24&quot;<br /> |<br /> |''With alignment groove''<br /> |4<br /> |-<br /> |43382001<br /> |LEAD ROLLER ASSEMBLY-36&quot;<br /> |<br /> |''With alignment groove''<br /> |4<br /> |-<br /> |43482001<br /> |LEAD ROLLER ASSEMBLY-42&quot;<br /> |<br /> |''With alignment groove''<br /> |4<br /> |-<br /> | rowspan=&quot;3&quot; |2<br /> |43182002<br /> |IDLER ROLLER ASSEMBLY-24&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |43382002<br /> |IDLER ROLLER ASSEMBLY-36&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |43482002<br /> |IDLER ROLLER ASSEMBLY-42&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> | rowspan=&quot;3&quot; |3<br /> |43187002<br /> |SHAFT-HEX-.75&quot; X 25.75&quot;<br /> |<br /> |''24&quot; compartments''<br /> |8<br /> |-<br /> |43387002<br /> |SHAFT-HEX-.75&quot; X 37.75&quot;<br /> |<br /> |''36&quot; compartments''<br /> |8<br /> |-<br /> |43487002<br /> |SHAFT-HEX-.75&quot; X 43.75&quot;<br /> |<br /> |''42&quot; compartments''<br /> |8<br /> |-<br /> | rowspan=&quot;3&quot; |4<br /> |43187003<br /> |SHAFT-HEX-.75&quot; X 27.5&quot;<br /> |<br /> |''24&quot; compartments''<br /> |4<br /> |-<br /> |43387003<br /> |SHAFT-HEX-.75&quot; X 39.5&quot;<br /> |<br /> |''36&quot; compartments''<br /> |4<br /> |-<br /> |43487003<br /> |SHAFT-HEX-.75&quot; X 45.5&quot;<br /> |<br /> |''42&quot; compartments''<br /> |4<br /> |-<br /> |5<br /> |HW1058<br /> |PIN-HITCH<br /> |<br /> |<br /> |24<br /> |}<br /> '''&lt;big&gt;''Powered Rollers''&lt;/big&gt;'''<br /> <br /> [[File:BE-TS Powered Rollers.png|alt=BE-TS Powered Rollers|frameless|546x546px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;3&quot; |1<br /> |43182003<br /> |POWERED ROLLER-24&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |43382003<br /> |POWERED ROLLER-36&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |43485003<br /> |POWERED ROLLER-42&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |2<br /> |43087001<br /> |JOURNAL-POWERED ROLLER<br /> |<br /> |<br /> |10<br /> |-<br /> |3<br /> |PT0404<br /> |FLANGE BEARING-3-BOLT-1&quot;<br /> |<br /> |<br /> |20<br /> |-<br /> |4<br /> |HW0321<br /> |BOLT-HHCS-5/16-18 X 1 1/4&quot;<br /> |<br /> |<br /> |60<br /> |-<br /> |5<br /> |HW0105<br /> |WASHER-LOCK-5/16&quot;<br /> |<br /> |<br /> |60<br /> |-<br /> |6<br /> |HW0004<br /> |NUT-HEX-5/16-18<br /> |<br /> |<br /> |60<br /> |-<br /> |7<br /> |PT0033<br /> |SPROCKET-35B18 X 1&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |8<br /> |00197028<br /> |KEY-1/4&quot; X 1 1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |00158001-16<br /> |CHAIN-ROLLER-#35<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |PT0031<br /> |LINK-CONNECTING-#35<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |PT0418<br /> |COLLAR-SHAFT-1&quot;<br /> |<br /> |<br /> |10<br /> |}<br /> [[File:BE-TS Powered Rollers Detail A.png|alt=BE-TS Powered Rollers Detail A|frameless|542x542px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0120<br /> |MOTOR-HYDRAULIC-160CC<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW1071<br /> |KEY-WOODRUFF-#808 STD<br /> |<br /> |''Supplied with Item 1''<br /> |A/R<br /> |-<br /> |3<br /> |H1544<br /> |ADAPTER-#6 JICM X #10 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |18<br /> |-<br /> |5<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |18<br /> |-<br /> |6<br /> |43017004<br /> |PLATE-MOTOR MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |PT0302-1<br /> |COUPLING BODY-#40 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |PT0301<br /> |CHAIN-COUPLING-#40<br /> |<br /> |''Includes connecting pin''<br /> |2<br /> |-<br /> |9<br /> |00197026<br /> |KEY-1/4&quot; X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43097003<br /> |KEY-1/4&quot; X 5/8&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Hose Carrier&lt;/big&gt;&lt;/u&gt;''' ===<br /> [[File:BE-TS Hose Carrier.png|alt=BE-TS Hose Carrier|frameless|550x550px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PT0629<br /> |CARRIER TRACK<br /> |<br /> |''81 links required''<br /> |10'<br /> |-<br /> |2<br /> |PT0631<br /> |BRACKET-UPPER MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0212<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0032<br /> |NUT-NILN-#10-24<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |PT0630<br /> |BRACKET-LOWER MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |7<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |43817056-2<br /> |BRACKET-CARRIER TRACK MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |HW0401<br /> |BOLT-HHCS-3/8-16 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |14<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |43817057<br /> |PLATE-CARRIER TRACK SUPPORT<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === &lt;big&gt;'''&lt;u&gt;Cable Retractor&lt;/u&gt;'''&lt;/big&gt; ===<br /> [[File:BE-TS Cable Retractor.png|alt=BE-TS Cable Retractor|frameless|585x585px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |CCR-12HD<br /> |TAKE UP REEL-CARRIER TRACK<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Operator Gate&lt;/big&gt;&lt;/u&gt;''' ===<br /> [[File:BE-TS Discontinued Drop Bar Operator Gate.png|alt=BE-TS Discontinued Drop Bar Operator Gate|frameless|568x568px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43015004<br /> |GATE-OPERATOR<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0407<br /> |BOLT-HHCS-3/8-16 X 2 3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |<br /> |<br /> |1<br /> |}<br /> [[File:BE-TS Operator Gate Continued.png|alt=BE-TS Operator Gate Continued|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43017064-2<br /> |LATCH-SWING GATE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0418<br /> |BOLT-HHCS-3/8-16 X 2 1/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0031<br /> |NUT-LOCK-3/8-16<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |N/A<br /> |HINGE-SPRING<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |5<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |HW1037<br /> |STOP-GATE<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0003<br /> |NUT-NILN-1/4-20<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |N/A<br /> |TORSION SPRING<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |11<br /> |HW0816<br /> |SCREW-HHCS-SELF DRILLING-#10 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |43806001<br /> |ANTI-FATIGUE MAT<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |43017058-2<br /> |THRESHOLD<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |HW0107<br /> |WASHER-LOCK3/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |HW9002<br /> |GAS SPRING<br /> |80292015<br /> |<br /> |1<br /> |-<br /> |19<br /> |43017086-2<br /> |BRACKET-MOUNTING-SPRING<br /> |80292015<br /> |<br /> |2<br /> |-<br /> |20<br /> |HW0815<br /> |SCREW-SELF DRILLING-#12-24 X 1&quot; T-4<br /> |80292015<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Part Discontinued. Spring Hinge and Torsion Spring must be replaced with Gas Spring Kit.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Guarding&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Outer Carriage Guards&lt;/big&gt;''''' ====<br /> <br /> ===== '''''1-Piece Outside Frame Guarding''''' =====<br /> [[File:BE-TS Outside Frame Guard 1-Piece.png|alt=BE-TS Outside Frame Guard 1-Piece|frameless|550x550px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817038<br /> |GUARD-FAR END-TOP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817037<br /> |GUARD-FAR END-MIDDLE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43817035<br /> |GUARD-FAR END-BOTTOM<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |33<br /> |}<br /> <br /> ===== '''''Split Outside Frame Guarding''''' =====<br /> [[File:BE-TS Outside Split Frame Guard.png|alt=BE-TS Outside Split Frame Guard|frameless|562x562px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817103<br /> |GUARD-FAR END-TOP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817102<br /> |GUARD-FAR END-MIDDLE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43817101<br /> |GUARD-FAR END-BOTTOM<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |37<br /> |}<br /> <br /> ==== '''&lt;big&gt;''Inner Carriage Guards''&lt;/big&gt;''' ====<br /> <br /> ===== '''''Inner Carriage Guards (Rotary Actuator)''''' =====<br /> [[File:BE-TS Inner Carriage Guard Rotary.png|alt=BE-TS Inner Carriage Guard (Rotary Actuator Units)|frameless|554x554px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817041-2<br /> |GUARD-FRONT-OPERATOR CONSOLE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817042-2<br /> |GUARD-INNER-FRAME<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |43014006-2<br /> |GUARD-LINEAR DRIVE SCREW<br /> |<br /> |<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |4<br /> |43017010-2<br /> |GUARD-SIDE-ARM CARRIER SHAFT<br /> |<br /> |<br /> |2<br /> |-<br /> |44517002-2<br /> |GUARD-SIDE-ARM CARRIER SHAFT<br /> |<br /> |''† Single compartment units only''<br /> |1<br /> |-<br /> |5<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |34<br /> |-<br /> |6<br /> |43017009-2<br /> |BRACKET-SCREW GUARD MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Single Compartment Guard replaces standard, Far Side Arm Carrier Shaft Guard.'' <br /> |}<br /> '''''Inner Carriage Guards (Helical Actuator)'''''<br /> <br /> [[File:BE-TS Inner Carriage Guard Helical Actuator.png|alt=BE-TS Inner Carriage Guard (Helical Actuator Units)|frameless|547x547px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817041-2<br /> |GUARD-FRONT-OPERATOR CONSOLE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817042-2<br /> |GUARD-INNER-FRAME<br /> |<br /> |<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |3<br /> |43017081-2<br /> |GUARD-SIDE-ARM CARRIER SHAFT<br /> |<br /> |<br /> |2<br /> |-<br /> |44517003-2<br /> |GUARD-SIDE-ARM CARRIER SHAFT<br /> |<br /> |''† Single compartment units only''<br /> |1<br /> |-<br /> |4<br /> |43017080-2<br /> |BRACKET-SIDE GUARD MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |43017082-3<br /> |MOUNT-CHAIN GUARD-LEAD SCREW<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43017082-4<br /> |MOUNT-CHAIN GUARD-LEAD SCREW<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |43017083-2<br /> |GUARD-CHAIN-LEAD SCREW<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0347<br /> |BOLT-BHSCS-1/4-20 X 3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |28<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Single Compartment Guard replaces standard, Far Side Arm Carrier Shaft Guard.'' <br /> |}<br /> <br /> ==== '''&lt;big&gt;''Dash &amp; Platform Guards''&lt;/big&gt;''' ====<br /> [[File:BE-TS Dash &amp; Platform Guards.png|alt=BE-TS Dash &amp; Platform Guards|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41614004-2<br /> |DASHBOARD-OPERATOR CONSOLE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817040<br /> |KICK PLATE-OPERATOR CONSOLE<br /> |<br /> |''41.5&quot; high''<br /> |1<br /> |-<br /> |3<br /> |43817086-2<br /> |DASHBOARD-OPERATOR CONSOLE<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43817088<br /> |KICK PLATE-OPERATOR CONSOLE<br /> |<br /> |''33.5&quot;'' ''high''<br /> |1<br /> |-<br /> |5<br /> |43817110-2<br /> |FRAME-DASHBOARD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |A/R<br /> |PLATE-DASHBOARD<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |7<br /> |HW0060<br /> |NUT-CLIP-#10-24<br /> |<br /> |<br /> |12<br /> |-<br /> |8<br /> |SS0114<br /> |BHSCS-#10-24 X 1/2&quot;-SST<br /> |<br /> |<br /> |12<br /> |-<br /> |9<br /> |PL0602<br /> |VINYL EDGING<br /> |<br /> |''At Foot Switch (Not shown)'' <br /> |1'<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Consult factory''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Lift Cylinder Guards&lt;/big&gt;''''' ====<br /> [[File:BE-TS Lift Cylinder Guards.png|alt=BE-TS Lift Cylinder Guards|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;2&quot; |1<br /> |43815016<br /> |GUARD-CLEVIS<br /> |<br /> |Operator right / Far left<br /> |2<br /> |-<br /> |43815017<br /> |GUARD-CLEVIS<br /> |<br /> |Operator left / Far right<br /> |2<br /> |-<br /> |2<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Labels &amp; Placards&lt;/big&gt;&lt;/u&gt;''' ===<br /> [[File:BE-TS Labels &amp; Placards Chassis.png|alt=BE-TS Labels &amp; Placards Chassis|frameless|546x546px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |00196616<br /> |LABEL-&quot;NO RIDERS ALLOWED&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |00196210<br /> |LABEL-WARNING-&quot;OPERATION BY AUTHORIZED PERSONNEL ONLY&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43696001<br /> |PLACARD-OFF / ON<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43096018<br /> |PLACARD-RACK LEVEL ASSIST<br /> |<br /> |''† If equipped''<br /> |1<br /> |-<br /> |5<br /> |43096015<br /> |PLACARD-PLATFORM RAISE / LOWER<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43096010<br /> |PLACARD-HORN<br /> |<br /> |''† If equipped''<br /> |1<br /> |-<br /> |7<br /> |43096016<br /> |PLACARD-DRIVE / ARM ROTATION<br /> |<br /> |<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |8<br /> |43096012<br /> |PLACARD-VACUUM OFF / ON<br /> |<br /> |''Vacuum units only''<br /> |1<br /> |-<br /> |43096011<br /> |PLACARD-MAGNET OFF / ON<br /> |<br /> |''Magnet units only (Not shown)''<br /> |1<br /> |-<br /> |9<br /> |43096017<br /> |PLACARD-POWERED ROLLER CUTOUT OVERRIDE<br /> |<br /> |''† If equipped''<br /> |1<br /> |-<br /> |10<br /> |43096013<br /> |PLACARD-POWERED ROLLERS / ARM TRAVERSE<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |00196633<br /> |LABEL-NOTICE-&quot;IN LINE VACUUM FILTER...&quot;<br /> |<br /> |''(1) per side (Vacuum units only)''<br /> |2<br /> |-<br /> |12<br /> |SM-1197<br /> |LABEL-ARM POSITION ARROW<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |00196609<br /> |LABEL-NOTICE-&quot;ARM MUST BE POSITIONED BETWEEN ARROWS...&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |00196602<br /> |LABEL-NOTICE-&quot;LUBRICATION POINTS ON UNDERSIDE&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |00196218<br /> |LABEL-WARNING-&quot;ELECTRICAL VOLTAGE HAZARD&quot;<br /> |<br /> |''Magnet units only''<br /> |1<br /> |-<br /> |16<br /> |00196238<br /> |LABEL-WARNING-&quot;STRONG MAGNETIC<br /> <br /> FIELD/DO NOT USE WITH PACEMAKER&quot;<br /> |<br /> |''†† Magnet units only''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Rack Level Assist (LAI), Horn and Powered Roller Cutout (PRC) are optional features. Not all units are equipped with these options.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Pacemaker Warning Label takes the place of the discontinued, Triangular Magnetic Field Label.''<br /> |}<br /> [[File:BE-TS Labels &amp; Placards Frame.png|alt=BE-TS Labels &amp; Placards Frame|frameless|549x549px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |00196004<br /> |LABEL-CAUTION-&quot;WATCH FOR BATTERY AND CHARGER CABLES IN TRAVEL PATH&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |00196216<br /> |LABEL-WARNING-&quot;CHAIN ENTANGLEMENT<br /> <br /> HAZARD&quot;<br /> |<br /> |''(1) per Clevis Guard'' <br /> |4<br /> |-<br /> |3<br /> |00196622<br /> |LABEL-LIFT POINT<br /> |<br /> |''(2) each end''<br /> |4<br /> |-<br /> |4<br /> |00196700<br /> |DECAL-BHS-24&quot; X 7.875&quot;<br /> |<br /> |''Far end (Not shown)''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |5<br /> |00196630<br /> |LABEL-NOTICE-HYD. OIL SPEC. (AW 68)<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |00196645<br /> |LABEL-NOTICE-HYD. OIL SPEC. (AW 32)<br /> |<br /> |''† See notes'' <br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |† Most units shipped prior to December 2014 require AW 68 Hydraulic Oil. Some units shipped prior to December 2014 shipped with AW 32 for low temperature applications.<br /> |}<br /> <br /> == &lt;big&gt;Extractor Arm&lt;/big&gt; ==<br /> {| class=&quot;wikitable&quot;<br /> !SYMBOL<br /> !DESCRIPTION / NOTICE<br /> !ACTUATOR DIAGRAM<br /> |-<br /> |[[File:IOP-400 BE-SL&amp;DS (10-23) Rotary Actuator Symbol.png|alt=Rotary Actuator Symbol|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Rotary_Actuator_Symbol.png]]<br /> |<br /> ==='''&lt;u&gt;&lt;big&gt;Rotary Actuator Symbol&lt;/big&gt;&lt;/u&gt;'''===<br /> Battery Extractors shipped prior to May 2020 are equipped with Rotary Actuator Extractor Arms. Parts Diagrams Specific to the Rotary Actuator design are indicated with the Rotary Actuator symbol.<br /> |[[File:IOP-400 BE-SL&amp;DS (10-23) Rotary Actuator Extractor Arm.png|alt=BE-TS Rotary Actuator|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Rotary_Actuator_Extractor_Arm.png]]<br /> |-<br /> |[[File:IOP-400 BE-SL&amp;DS (10-23) Helical Actuator Symbol.png|alt=Helical Actuator Symbol|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Helical_Actuator_Symbol.png]]<br /> |<br /> ===&lt;big&gt;'''&lt;u&gt;Helical Actuator Symbol&lt;/u&gt;'''&lt;/big&gt;===<br /> Battery Extractors shipped from May 2020 to Present are equipped with Helical Actuator Extractor Arms. Parts Diagrams Specific to the Rotary Actuator design are indicated with the Helical Actuator Symbol.<br /> |[[File:IOP-400 BE-SL&amp;DS (10-23) Helical Actuator Extractor Arm.png|alt=BE-TS Helical Actuator|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Helical_Actuator_Extractor_Arm.png]]<br /> |}<br /> ===&lt;big&gt;&lt;u&gt;Vacuum Components &amp; Swing Arms&lt;/u&gt;&lt;/big&gt;===<br /> ====''&lt;big&gt;Vacuum Arms (Rotary Actuator)&lt;/big&gt;''====<br /> [[File:BE-TS Vacuum Arms (Rotary Actuator).png|alt=BE-TS Vacuum Arms (Rotary Actuator)|frameless|619x619px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;2&quot; |1<br /> |N/A<br /> |ARM-PUSH/PULL-30&quot;<br /> |<br /> |''&lt;sup&gt;†&lt;/sup&gt; Discontinued''<br /> |1<br /> |-<br /> |N/A<br /> |ARM-PUSH/PULL-36&quot;<br /> |<br /> |''&lt;sup&gt;†&lt;/sup&gt; Discontinued''<br /> |1<br /> |-<br /> |2<br /> |HW0509<br /> |BOLT-HHCS-1/2-13 X 4 1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |P0505<br /> |BUSHING-RED-#6 NPT X #4 FNPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |P0402<br /> |HOSE BARB-1/4 X #4 MNPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0428<br /> |STUD-VACUUM-3/8-16 X 5&quot;<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |9<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |HW-KIT-2<br /> |<br /> |40<br /> |-<br /> |10<br /> |HW1001<br /> |SPRING-3/8&quot;<br /> |HW-KIT-2<br /> |<br /> |24<br /> |-<br /> |11<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |12<br /> |HW0424<br /> |NUT-JAM-3/8-16<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |REF<br /> |43052006<br /> |ADJUSTABLE PUSH/PULL ARM<br /> |<br /> |''Includes Items 13 through 17''<br /> |1<br /> |-<br /> |13<br /> |43057034<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |43055008<br /> |VACUUM CUP MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''&lt;sup&gt;†&lt;/sup&gt; One-piece Arms no longer available. Must replace with Adjustable Arm.''<br /> |}<br /> <br /> ====&lt;big&gt;''Vacuum Cups''&lt;/big&gt;====<br /> [[File:BE-TS Vacuum Cups.png|alt=Vacuum Cups|frameless|563x563px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;4&quot; |A/R<br /> |00162004<br /> |VACUUM CUP-10&quot; 3-PC (STANDARD)<br /> |<br /> |''&lt;sup&gt;†&lt;/sup&gt; Includes Items 1 through 4''<br /> | rowspan=&quot;4&quot; |A/R<br /> |-<br /> |00162003<br /> |VACUUM CUP-12&quot; 3-PC (STANDARD)<br /> |<br /> |''&lt;sup&gt;†&lt;/sup&gt; Includes Items 4 through 7''<br /> |-<br /> |00162007<br /> |VACUUM CUP-10&quot; 3-PC, REINFORCED<br /> |<br /> |''Includes Items 1,3,4 &amp; 8''<br /> |-<br /> |00162005<br /> |VACUUM CUP-12&quot; 3-PC, REINFORCED<br /> |<br /> |''Includes Items 4,5,7 &amp; 9''<br /> |-<br /> |1<br /> |00164006<br /> |CASTING-10&quot; VACUUM CUP<br /> |<br /> | rowspan=&quot;3&quot; |''10&quot; cup only''<br /> |1<br /> |-<br /> |2<br /> |00164004<br /> |SEAL-RUBBER-10&quot;<br /> |<br /> |1<br /> |-<br /> |3<br /> |00165002<br /> |PLATE-FRONT-10&quot;<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0311<br /> |BOLT-FHSCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |00166001<br /> |CASTING-12&quot; VACUUM CUP<br /> |<br /> | rowspan=&quot;3&quot; |''12&quot; cup only''<br /> |1<br /> |-<br /> |6<br /> |00164001<br /> |SEAL-RUBBER-12&quot;<br /> |<br /> |1<br /> |-<br /> |7<br /> |00165001<br /> |PLATE-FRONT-12&quot;<br /> |<br /> |1<br /> |-<br /> |8<br /> |00164007<br /> |SEAL-RUBBER-10&quot;-REINFORCED<br /> |<br /> |<br /> |A/R<br /> |-<br /> |9<br /> |00167003<br /> |SEAL-RUBBER-12&quot;-REINFORCED<br /> |<br /> |<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''&lt;sup&gt;†&lt;/sup&gt; 10&quot; and 12&quot; 1-Piece Cups no longer available. Must replace with 3-Piece Cup. Verify required cup size prior to ordering.''<br /> |}<br /> <br /> ====&lt;big&gt;''Swing Arms (Rotary Actuator)''&lt;/big&gt;====<br /> [[File:BE-TS Swing Arms (Rotary Actuator).png|alt=BE-TS Swing Arms (Rotary Actuator)|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> |ITEM<br /> |BHS PART NUMBER<br /> |DESCRIPTION<br /> |REF. KIT NO.<br /> |NOTES<br /> |NO. REQ<br /> |-<br /> | rowspan=&quot;3&quot; |1<br /> |45055001<br /> |TIE PLATE-SWING ARM<br /> |<br /> |BE-24-2-TS<br /> |1<br /> |-<br /> |45255001<br /> |TIE PLATE-SWING ARM<br /> |<br /> |BE-36-2-TS (NOT SHOWN)<br /> |1<br /> |-<br /> |45355001<br /> |TIE PLATE-SWING ARM<br /> |<br /> |BE-42-2-TS (NOT SHOWN)<br /> |1<br /> |-<br /> |2<br /> |43055004<br /> |SWING ARM-RHS<br /> |†<br /> |NOT SOLD INDIVIDUALLY<br /> |1<br /> |-<br /> |3<br /> |43055002<br /> |SWING ARM-LHS<br /> |†<br /> |NOT SOLD INDIVIDUALLY<br /> |1<br /> |-<br /> |4<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0113<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0010<br /> |NUT-JAM-5/8-11<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |PT0413<br /> |COLLAR-SHAFT-3&quot;<br /> |80252001<br /> |<br /> |2<br /> |-<br /> |8<br /> |43027001<br /> |SHAFT-ROTARY ACTUATOR<br /> |80252001<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW1013<br /> |KEY-3/8&quot; X 12&quot;<br /> |80252001<br /> |<br /> |1<br /> |-<br /> |10<br /> |PT0419<br /> |BEARING-SAE 841-2&quot; I.D., 3&quot; OD, 1/8&quot; THICK<br /> |80252001<br /> |<br /> |3<br /> |-<br /> |11<br /> |43052005<br /> |CAP-BEARING<br /> |<br /> |INCLUDES BEARING<br /> |2<br /> |-<br /> |12<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |13<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |14<br /> |43057014<br /> |STANDOFF-WIRE<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |HW0312<br /> |SCREW-SHSS-1/4-20 X 1&quot;-CUP POINT<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |43057003<br /> |CUSHION-SWING ARM<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |43055001<br /> |STOP-SWING ARM<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |20<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |21<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |H1565<br /> |ADAPTER-45 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |23<br /> |H1600<br /> |ADAPTER-90 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |&lt;sup&gt;†&lt;/sup&gt; ''Included in multiple kits.''<br /> |-<br /> | colspan=&quot;6&quot; |See ''Single Compartment Swing Arm Stop for the the Single Compartment Swing Arm Stop.''<br /> |}<br /> <br /> === '''''Vacuum Swing Arm Stop (Rotary Actuator)''''' ===<br /> [[File:BE-TS Single Compartment Swing Arms (Rotary Actuator).png|alt=BE-TS Single Compartment Swing Arms (Rotary Actuator)|frameless|575x575px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |44555001<br /> |STOP-SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43057003<br /> |CUSHION-SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43057008<br /> |SPACER-SWING ARM STOP<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |}<br /> ====''&lt;big&gt;Vacuum Pump (Rotary Actuator)&lt;/big&gt;''====<br /> [[File:BE-TS Vacuum Pumps (Rotary Actuator).png|alt=BE-TS Vacuum Pumps (Rotary Actuator)|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |P0005<br /> |PUMP-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |P0208<br /> |FILTER-HI FLOW<br /> |<br /> |<br /> |3<br /> |-<br /> |3<br /> |P0503<br /> |NIPPLE-#4 NPT-BRASS<br /> |<br /> |<br /> |3<br /> |-<br /> |4<br /> |P0502<br /> |TEE-#4 FNPT-BRASS<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |P0506<br /> |ELBOW-STR-90 DEG-#4 NPT-BRASS<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |P0402<br /> |HOSE BARB-1/4 X #4 NPTM-BRASS<br /> |<br /> |<br /> |6<br /> |-<br /> |7<br /> |P0207<br /> |VALVE-VACUUM RELEASE<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |P0302<br /> |HOSE-VACUUM-1/4&quot; I.D.<br /> |<br /> |''Two 6&quot; pieces''<br /> |1'<br /> |-<br /> |9<br /> |P0302<br /> |HOSE-VACUUM-1/4&quot; I.D.<br /> |<br /> |''Short Arm side''<br /> |1'<br /> |-<br /> |10<br /> |P0302<br /> |HOSE-VACUUM-1/4&quot; I.D.<br /> |<br /> |''Long Arm side''<br /> |2'<br /> |-<br /> |11<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |HW0212<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |E0624<br /> |CONNECTOR-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |15a<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |''Not shown''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |16<br /> |E0501<br /> |CORD-14-4 SW/SOW<br /> |<br /> |''Withtout Ground Connection in Arm''<br /> | rowspan=&quot;2&quot; |15'<br /> |-<br /> |E0514<br /> |CORD-16-5 SW/SOW<br /> |<br /> |<br /> |-<br /> |17<br /> |43057014<br /> |STANDOFF-CABLE<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |HW0206<br /> |SCREW-RHMS-#10-32 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |19<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |20<br /> |43057021<br /> |PLATE-STIFFENER<br /> |†<br /> |<br /> |2<br /> |-<br /> |21<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |†<br /> |<br /> |12<br /> |-<br /> |22<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |†<br /> |<br /> |12<br /> |-<br /> |23<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |†<br /> |<br /> |12<br /> |-<br /> |24<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |†<br /> |''Not shown''<br /> |24<br /> |-<br /> |25<br /> |P0111<br /> |FILTER-VACUUM-INLINE<br /> |<br /> |''Not shown''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |&lt;sup&gt;†&lt;/sup&gt; ''Included in multiple kits.''<br /> |}<br /> ===&lt;u&gt;&lt;big&gt;Rotary Actuator&lt;/big&gt;&lt;/u&gt;===<br /> [[File:BE-TS Rotary Actuator.png|alt=BE-TS Rotary Actuator|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43046001<br /> |ROTARY ACTUATOR<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |80000002<br /> |ROTARY ACTUATOR BASE ASSEMBLY<br /> |<br /> |''Without Actuator''<br /> |1<br /> |-<br /> |2A<br /> |N/A<br /> |VERTICAL CARRIER PLATE-OUTER<br /> |<br /> |''Included with 80000002''<br /> |2<br /> |-<br /> |2B<br /> |N/A<br /> |VERTICAL CARRIER PLATE-INNER<br /> |<br /> |''Included with 80000002''<br /> |1<br /> |-<br /> |2C<br /> |N/A<br /> |CARRIER BASE PLATE<br /> |<br /> |''Included with 80000002''<br /> |1<br /> |-<br /> |3<br /> |HW1070<br /> |PIN-PULL DOWEL-5/8&quot; X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0508<br /> |BOLT-SHCS-1/2-13 X 3/4&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW1045<br /> |PIN-PULL DOWEL-3/8&quot; X 1 1/2&quot;<br /> |<br /> |''Included with 80000002''<br /> |6<br /> |-<br /> |6<br /> |HW0412<br /> |BOLT-SHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |''Included with 80000002''<br /> |12<br /> |-<br /> |7<br /> |H0010<br /> |FITTING-BULKHEAD-3/4-16 X #4 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 NPTM<br /> |<br /> |<br /> |2<br /> |}<br /> ===&lt;u&gt;&lt;big&gt;Carrier Shafts &amp; Bearings ''(Rotary Actuator)''&lt;/big&gt;&lt;/u&gt;===<br /> [[File:BE-TS Rotary Actuator Carrier Shafts.png|alt=BE-TS Carrier Shafts (Rotary Actuator)|frameless|560x560px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43057045<br /> |CARRIER SHAFT-EXTRACTOR ARM<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |2<br /> |43054007<br /> |BEARING-EXTRACTOR ARM CARRIER<br /> |80252002<br /> |''†† See notes''<br /> |4<br /> |-<br /> |3<br /> |HW0412<br /> |BOLT-SHCS-3/8-16 X 1 1/4&quot;<br /> |80252002<br /> |<br /> |16<br /> |-<br /> |4<br /> |PT0413<br /> |COLLAR-SHAFT-3&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |PT0624<br /> |FITTING-ZERK<br /> |80252002<br /> |''Not shown''<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† See Vacuum Extended Reach section for Extended Reach equipped units.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Carrier Shafts &amp; Bearings (Helical Actuator) section for Helical Actuator equipped units.''<br /> |}<br /> <br /> ===&lt;u&gt;&lt;big&gt;Drive Screw Components ''(Rotary Actuator)''&lt;/big&gt;&lt;/u&gt;===<br /> ====''&lt;big&gt;Drive Nut Assembly (Rotary Actuator)&lt;/big&gt;''====<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Drive Nut Assembly Rotary Actuator.png|alt=BE-SL&amp;DS Drive Nut Assembly Rotary Actuator|frameless|537x537px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Drive_Nut_Assembly_Rotary_Actuator.png]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43054006<br /> |DRIVE NUT ASSEMBLY<br /> |80252003<br /> |&lt;sup&gt;''†''&lt;/sup&gt; ''See notes''<br /> |1<br /> |-<br /> |2<br /> |HW0426<br /> |BOLT-SHCS-3/8-16 X 5 1/2&quot;<br /> |80252003<br /> |&lt;sup&gt;''††''&lt;/sup&gt; ''See notes''<br /> |4<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |80252003<br /> |&lt;sup&gt;''††''&lt;/sup&gt; ''See notes''<br /> |4<br /> |-<br /> |4<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |80252003<br /> |&lt;sup&gt;''††''&lt;/sup&gt; ''See notes''<br /> |4<br /> |-<br /> |5<br /> |PT0624<br /> |FITTING-ZERK<br /> |80252003<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''&lt;sup&gt;†&lt;/sup&gt; See Drive Screw Components (Helical Actuator) section for Helical Actuator equipped units.''<br /> |-<br /> | colspan=&quot;6&quot; |''&lt;sup&gt;††&lt;/sup&gt; It is recommended to replace mounting hardware when replacing Drive Nut Assembly.''<br /> |}<br /> ====''&lt;big&gt;Drive Screw&lt;/big&gt;''====<br /> =====''[Current] Drive Screw Assembly (Frame #'s 374 to Present)''=====<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Drive Screw Rotary Current.png|alt=Current BE-SL &amp; BE-DS Drive Screw (Rotary Actuator)|frameless|531x531px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Drive_Screw_Rotary_Current.png]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43024001<br /> |SCREW-LINEAR DRIVE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |PT0119<br /> |SPROCKET-50B15 X 1 3/16&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43097004<br /> |KEY-1/4 X 7/8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |00158001-15<br /> |CHAIN-ROLLER-#50<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |PT0102<br /> |LINK-CONNECTING-#50<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |PT0406<br /> |FLANGE BEARING-4 BOLT-1 3/16&quot;<br /> |<br /> |''Alloy casting''<br /> |2<br /> |-<br /> |7<br /> |HW0503<br /> |BOLT-HHCS-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |PT0107<br /> |SPROCKET-50B15 X 1&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HC0121<br /> |MOTOR-HYDRAULIC-100CC<br /> |<br /> |''SAE 2-Bolt mount''<br /> |1<br /> |-<br /> |11<br /> |H1605<br /> |ADAPTER-90 DEG-#6 JICM X #10 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW1071<br /> |KEY-WOODRUFF-#808 STD<br /> |<br /> |''Supplied with Item 10''<br /> |A/R<br /> |-<br /> |13<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |14<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |15<br /> |43017007<br /> |PLATE-MOUNTING-SCREW DRIVE MOTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |43057019<br /> |PLATE-COVER<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0415<br /> |BOLT-SHCS-3/8-16 X 3/4&quot;<br /> |<br /> |<br /> |8<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> ! colspan=&quot;6&quot; |ITEMS BELOW ARE REQUIRED FOR REPLACING THE LINEAR DRIVE<br /> SCREW ON UNITS WITH FRAME #'S OF 373 AND EARLIER<br /> |-<br /> ! colspan=&quot;6&quot; |LINEAR DRIVE SCREW UPDATE KIT<br /> |-<br /> |REF<br /> |80252011<br /> |UPGRADE KIT<br /> |<br /> |<br /> |1<br /> |-<br /> |1<br /> |43024001<br /> |SCREW-LINEAR DRIVE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |PT0119<br /> |SPROCKET-50B15 X 1 3/16&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43097004<br /> |KEY-1/4 X 7/8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |PT0406<br /> |FLANGE BEARING-4 BOLT-1 3/16&quot;<br /> |<br /> |''Alloy casting''<br /> |2<br /> |-<br /> |7<br /> |HW0503<br /> |BOLT-HHCS-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |16<br /> |43057019<br /> |PLATE-COVER<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |43057022<br /> |SHIM-18GA<br /> |<br /> |''May not be required (Not shown)''<br /> |2<br /> |-<br /> |19<br /> |43057018<br /> |TEMPLATE-BEARING MOUNT PATTERN<br /> |<br /> |''Not shown''<br /> |1<br /> |-<br /> |20<br /> |80000015<br /> |INSTRUCTION DETAIL<br /> |<br /> |''Not shown''<br /> |REF<br /> |-<br /> |21<br /> |43057020<br /> |SPACER PLATE<br /> |<br /> |''Not shown''<br /> |2<br /> |}<br /> =====''[Discontinued] Drive Screw Assembly (Frame #'s 373 and Earlier)''=====<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Drive Screw (Rotary Actuator) Discontinued.png|alt=Discontinued BE-SL &amp; BE-DS Drive Screw (Rotary Actuator)|frameless|532x532px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Drive_Screw_(Rotary_Actuator)_Discontinued.png]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |SCREW-LINEAR DRIVE (DISCONTINUED)<br /> |<br /> |''See 80252011 Upgrade Kit''<br /> |1<br /> |-<br /> |2<br /> |PT0118<br /> |SPROCKET-50B12 X 1 3/16&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43097004<br /> |KEY-1/4&quot; X 7/8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |00158001-15<br /> |CHAIN-ROLLER-#50<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |PT0102<br /> |LINK-CONNECTING-#50<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43057016<br /> |BLOCK-BEARING RETAINER<br /> |<br /> |<br /> |2<br /> |-<br /> |6a<br /> |PT0414<br /> |RACE-TAPERED ROLLER BEARING<br /> |<br /> |''Included with 43057016''<br /> |2<br /> |-<br /> |7<br /> |PT0623<br /> |SEAL-GREASE<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0416<br /> |BOLT-SHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |PT0415<br /> |BEARING-TAPERED ROLLER<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW1050<br /> |NUT-LOCK<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |43057017<br /> |PLATE-COVER<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0415<br /> |BOLT-SHCS-3/8-16 X 3/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |13<br /> |PT0624<br /> |FITTING-ZERK<br /> |<br /> |<br /> |2<br /> |}<br /> ===&lt;big&gt;&lt;u&gt;Hose Carrier Plate&lt;/u&gt;&lt;/big&gt;===<br /> [[File:BE-TS Hose Carrier Plate.png|alt=BE-TS Hose Carrier Plate|frameless|554x554px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43915018<br /> |PLATE-HOSE CARRIER<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |PT0618<br /> |BRACKET-FIXED END<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |PT0617<br /> |HOSE CARRIER<br /> |<br /> |''20 links required''<br /> |3 FT<br /> |-<br /> |5<br /> |PT0619<br /> |BRACKET-MOVING END<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |9<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |10<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HC0262<br /> |VALVE-CROSS PORT RELIEF<br /> |<br /> |''Includes cartridges''<br /> |1<br /> |-<br /> |12a<br /> |43846002<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''†† For Item 12 (Not shown)''<br /> |2<br /> |-<br /> |13<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |H1560<br /> |ADAPTER-45 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |E1329<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |''PVC - Includes cover''<br /> |1<br /> |-<br /> |19<br /> |HW0212<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |20<br /> |HW0102<br /> |WASHER-FLAT-#10-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |21<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |22<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |23<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |''For Items 21 &amp; 22 (Not shown)''<br /> |3<br /> |-<br /> |24<br /> |HW1076<br /> |BOLT-FHSCS-3/8-16 X 1&quot;<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Units built prior to February 2014 without extended reach option use (4) HW0403 mounting bolts.''<br /> <br /> ''†† Cartridges are for replacement only.''<br /> |}<br /> <br /> === &lt;big&gt;'''&lt;u&gt;Magnet Components ''(Rotary Actuator)''&lt;/u&gt;'''&lt;/big&gt; ===<br /> <br /> ==== '''''&lt;big&gt;[Discontinued] Magnet Arm Configuration&lt;/big&gt;''''' ====<br /> [[File:BE-TS (Discontinued) Magnet Arm Configuration.png|alt=BE-TS (Discontinued) Magnet Arm Configuration|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41257014<br /> |TIE PLATE-SWING ARM<br /> |<br /> |''All units''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |41655008<br /> |EXTENSION-ARM<br /> |<br /> |''BE-36 only (Not shown)''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |43455001<br /> |EXTENSION-ARM<br /> |<br /> |''BE-42 only (Not shown)''<br /> |1<br /> |-<br /> |2<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0113<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0010<br /> |NUT-JAM-5/8-11<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |41655001<br /> |CARRIER TUBE-MAGNET SWING SHAFT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |7<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |9<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |6<br /> |-<br /> |10<br /> |41657006<br /> |SHAFT-MAGNET SWING<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |41698001<br /> |KEY-3/8&quot; X 7/16&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |N/A<br /> |STOP-MAGNET SWING<br /> |<br /> |''† Dicontinued''<br /> |1<br /> |-<br /> |13<br /> |PT0430<br /> |FLANGE BEARING-4 BOLT-1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |HW0513<br /> |BOLT-HHCS-1/2-13 X 2 1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |15<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |16<br /> |-<br /> |16<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |17<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |-<br /> |18<br /> |41655002<br /> |PLATE-MAGNET MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |41257015<br /> |BLOCK-TIGHTENER<br /> |<br /> |''2-piece item''<br /> |1<br /> |-<br /> |20<br /> |41257016<br /> |BLOCK-FIXED<br /> |<br /> |''2-piece item''<br /> |1<br /> |-<br /> |21<br /> |HW0423<br /> |BOLT-SHCS-3/8-16 X 3 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0806<br /> |SET SCREW-3/8-16 X 2&quot;<br /> |<br /> |''Replaces Swivel Head''<br /> |4<br /> |-<br /> |24<br /> |HW0424<br /> |NUT-JAM-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |25<br /> |41657017<br /> |INSULATOR-MAGNET MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |26<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |27<br /> |41657008<br /> |PAD-MAGNET SLIDE<br /> |<br /> |<br /> |2<br /> |-<br /> |28<br /> |HW0314<br /> |BOLT-FHSCS-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Refer to [Current] Magnet Arm Configuration (Rotary Actuator) section for replacement / upgrade parts.''<br /> |}<br /> <br /> ==== '''&lt;big&gt;''[Current] Magnet Arm Configuration (Rotary Actuator)''&lt;/big&gt;''' ====<br /> [[File:BE-TS (Current) Magnet Arm Configuration.png|alt=BE-TS (Current) Magnet Arm Configuration|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |80252012<br /> |MAGNET SWING STOP KIT<br /> |<br /> |''Includes Items 1 through 6''<br /> |A/R<br /> |-<br /> |1<br /> |43057029<br /> |PLATE-STOP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43058003<br /> |SLEEVE-STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |43057030<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |PL0501<br /> |GROMMET-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0509<br /> |BOLT-HHCS-1/2-13 X 4 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |44557003<br /> |PLATE-STOP<br /> |<br /> |''† Single compartment units only''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† For units equipped with Pivot Shaft. See [Current] Magnet Arm Configuration (Rotary Actuator) for units with Independent Magnet Pivot Bearings.'' <br /> |}<br /> '''&lt;big&gt;''Magnet Pivot Stop (Rotary Actuator)''&lt;/big&gt;'''<br /> <br /> [[File:BE-TS Magnet Pivot Stop.png|alt=BE-TS Magnet Pivot Stop|frameless|547x547px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |MAGNET PUSH/PULL ARM<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |43055010<br /> |MAGNET MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |PT0470<br /> |BEARING-MAGNET PIVOT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0525<br /> |BOLT-CARRIAGE-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |5<br /> |HW0524<br /> |BOLT-CARRIAGE-1/2-13 X 2&quot;<br /> |<br /> |''†† Stop Plate location''<br /> |4<br /> |-<br /> |6<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |7<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |16<br /> |-<br /> |8<br /> |43058009<br /> |PLATE-ROTATION STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |43058003<br /> |SLEEVE-STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43058010<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |PL0501<br /> |GROMMET-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |43057037<br /> |INSULATOR-BOTTOM<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |16<br /> |41657008<br /> |SLIDE-MAGNET<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0314<br /> |BOLT-FHSCS-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |44558001<br /> |PLATE-ROTATION STOP<br /> |<br /> |''†† Single compartment units only''<br /> |2<br /> |-<br /> |REF<br /> |43052014<br /> |ADJUSTABLE PUSH-PULL ARM<br /> |<br /> |''Includes Items 19-23''<br /> |A/R<br /> |-<br /> |19<br /> |43055018<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |20<br /> |43055019<br /> |MAGNET MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |21<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |22<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† 1-Piece Arm no longer available. Must be replaced with Adjustable Arm.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Single compartment Stop Plates require (1) additional 2&quot; long Carriage Bolt each''<br /> |}<br /> <br /> ==== &lt;big&gt;''Magnet Mounting Hardware (Rotary Actuator)''&lt;/big&gt; ====<br /> [[File:BE-TS Magnet Mounting Hardware (Rotary Actuator).png|alt=BE-TS Magnet Mounting Hardware (Rotary Actuator)|frameless|554x554px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43032009<br /> |MAGNET ASSEMBLY<br /> |<br /> |''Includes Items 1 through 12''<br /> |A/R<br /> |-<br /> |1<br /> |N/A<br /> |ELECTROMAGNET-95VDC<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |E0314<br /> |SENSOR-PROXIMITY-30MM<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |N/A<br /> |GASKET-REAR<br /> |<br /> |''Discontinued - Not used''<br /> |2<br /> |-<br /> |4<br /> |41657002<br /> |COVER-PROXIMITY SENSOR HOUSING<br /> |<br /> |''Rear''<br /> |2<br /> |-<br /> |5<br /> |HW1065<br /> |SCREW-SHCS-#6-32 X 3/8&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |6<br /> |HW1066<br /> |WASHER-LOCK-#6<br /> |<br /> |<br /> |8<br /> |-<br /> |7<br /> |E0376<br /> |INDICATOR LIGHT<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |8<br /> |E0335<br /> |RECEPTACLE-5 PIN MALE<br /> |<br /> |''With 12&quot; lead''<br /> |2<br /> |-<br /> |9<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |N/A<br /> |GASKET-FRONT<br /> |<br /> |''Discontinued - Not used''<br /> |2<br /> |-<br /> |11<br /> |41657003<br /> |COVER-PROXIMITY SENSOR HOUSING<br /> |80252015<br /> |''Front''<br /> |2<br /> |-<br /> |12<br /> |HW0138<br /> |SCREW-FHSCS-#8-32 X 3/8&quot;<br /> |80252015<br /> |<br /> |8<br /> |-<br /> |13<br /> |HW0433<br /> |STUD-1/2-13 X 5&quot;<br /> |80252006<br /> | rowspan=&quot;5&quot; |''For units with Magnet Pivot Shaft only.'' <br /> <br /> ''See [Discontinued] Magnet Arm Configuration for units built prior to 11/01/14''<br /> |8<br /> |-<br /> |14<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |80252006<br /> |8<br /> |-<br /> |15<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |80252006<br /> |40<br /> |-<br /> |16<br /> |HW1002<br /> |SPRING-1/2&quot;<br /> |80252006<br /> |24<br /> |-<br /> |17<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |80252006<br /> |8<br /> |-<br /> |18<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |80252014<br /> | rowspan=&quot;4&quot; |''For units with independent Pivot Bearings only.'' <br /> <br /> ''See [Current] Magnet Arm Configuration for units built 11/01/14 to present)''<br /> |4<br /> |-<br /> |19<br /> |HW1002<br /> |SPRING-1/2&quot;<br /> |80252014<br /> |4<br /> |-<br /> |20<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |80252014<br /> |8<br /> |-<br /> |21<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |80252014<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Extractors built or replacement magnets shipped prior to October 2021 used multi-piece indicator lights with replaceable bulb and lens and are no longer available. Current indicator light is a 1-piece LED assembly. Replacement of any multi-piece component requires replacing entire assembly with current, 1-piece indicator light.''<br /> |}<br /> <br /> === '''''Magnet Cords (Rotary Actuator)''''' ===<br /> [[File:BE-TS Magnet Cords.png|alt=BE-TS Magnet Cords|frameless|555x555px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1105<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |''Weather proof box''<br /> |1<br /> |-<br /> |2<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |E1106<br /> |COVER-JUNCTION BOX<br /> |<br /> |''Weather proof with gasket'' <br /> |1<br /> |-<br /> |4<br /> |E0333<br /> |RECEPTACLE-9 PIN MALE<br /> |<br /> |''With 12&quot; lead''<br /> |1<br /> |-<br /> |5<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |6<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |7<br /> |E0334<br /> |CORD-5 PIN FEMALE<br /> |<br /> |''With 36&quot; lead''<br /> |2<br /> |-<br /> |8<br /> |E0332<br /> |CORD-9 PIN FEMALE-90 DEG<br /> |<br /> |''With 36&quot; lead''<br /> |1<br /> |-<br /> |9<br /> |PL0501<br /> |GROMMET-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |41657013-2<br /> |PLATE-PANEL MOUNTING<br /> |<br /> |''With single cable hole''<br /> |1<br /> |-<br /> |11<br /> |E0334-6<br /> |CORD-5 PIN FEMALE<br /> |<br /> |''With 72&quot; lead''<br /> |2<br /> |-<br /> |12<br /> |43057038-2<br /> |PLATE-PANEL MOUNTING<br /> |<br /> |''With dual cable holes''<br /> |1<br /> |}<br /> '''''&lt;big&gt;Magnet Panel Mounting (Rotary Actuator)&lt;/big&gt;'''''<br /> <br /> [[File:BE-TS Panel Mounting (Rotary Actuator).png|alt=BE-TS Panel Mounting (Rotary Actuator)|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43057021<br /> |PLATE-STIFFENER<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |''Not shown''<br /> |24<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |5<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |12<br /> |-<br /> |6<br /> |41637001<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0325<br /> |BOLT-5/16-18 X 1 3/4&quot;-PAN HEAD<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |N/A<br /> |INSULATOR-THREADED FEMALE<br /> |<br /> |''Discontinued''<br /> |4<br /> |-<br /> |9<br /> |HW0106<br /> |WASHER-FLAT-5/16&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0326<br /> |NUT-NILN-5/16-18<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |E1016<br /> |FUSE HOLDER<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |E0325<br /> |FUSE-7AMP-250VAC<br /> |<br /> |''FLM-7 or FNM-7''<br /> |1<br /> |-<br /> |16<br /> |PL0307<br /> |INSULATOR-MALE STUD<br /> |<br /> |<br /> |4<br /> |}<br /> '''''&lt;big&gt;Magnet Extractor Electrical Panel (Rotary Actuator)&lt;/big&gt;'''''<br /> <br /> [[File:BE-TS Magnet Extractor Electrical Panel (Rotary Actuator).png|alt=BE-TS Magnet Extractor Electrical Panel (Rotary Actuator)|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41637001<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41637002<br /> |WIRE WAY<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |41637003<br /> |WIRE WAY<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |41637004<br /> |TRACK-TERMINAL BLOCK MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |41637005<br /> |TRACK-TERMINAL BLOCK MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |7<br /> |HW0132<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |<br /> |10<br /> |-<br /> |8<br /> |HW0133<br /> |NUT-NILN-#8-32<br /> |<br /> |''Not shown''<br /> |16<br /> |-<br /> |9<br /> |E1020<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |12<br /> |-<br /> |10<br /> |E1040<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |E1330<br /> |END ANCHOR<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |E1009<br /> |RECTIFIER-FULL WAVE BRIDGE<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |HW0135<br /> |SCREW-RHMS-#8-32 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |E1313<br /> |SOCKET-RELAY-8 PIN<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0139<br /> |SCREW-RHMS-#8-32 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |E0331<br /> |RELAY-DPDT-110VAC<br /> |<br /> |''with Indicator Light''<br /> |2<br /> |}<br /> <br /> === &lt;big&gt;'''&lt;u&gt;Swing Arm Stop (Rotary Actuator)&lt;/u&gt;'''&lt;/big&gt; ===<br /> [[File:BE-TS Swing Arm Stop (Rotary Actuator).png|alt=BE-TS Swing Arm Stop (Rotary Actuator)|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055007<br /> |MOUNT-STOP-SWING ARM<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |2<br /> |43057024<br /> |STOP-SWING ARM<br /> |<br /> |''BE-24''<br /> |4<br /> |-<br /> |43057023<br /> |STOP-SWING ARM<br /> |<br /> |''BE-36 &amp; BE-42''<br /> |4<br /> |-<br /> |3<br /> |HW0304<br /> |BOLT-HHCS-1/4-20 X 1 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† See Vacuum Swing Arm Stop (Rotary Actuator) section for single compartment stop mount and stop.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Extended Reach (Rotary Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Vacuum Extended Reach (Rotary Actuator).png|alt=BE-TS Vacuum Extended Reach (Rotary Actuator)|frameless|536x536px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41257014<br /> |TIE PLATE-SWING ARM<br /> |<br /> |''All units''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |41655008<br /> |EXTENSION-ARM<br /> |<br /> |''BE-36 only (Not shown)''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |43455001<br /> |EXTENSION-ARM<br /> |<br /> |''BE-42 only (Not shown)''<br /> |1<br /> |-<br /> |2<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |P0301-1<br /> |HOSE-COIL-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |41257035<br /> |STANDOFF<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW1072<br /> |RESTRAINT-HOSE<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0318<br /> |BOLT-SHCS-1/4-20 X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |HW0312<br /> |SCREW-SHSS-1/4-20 X 1&quot;-CUP POINT<br /> |<br /> |<br /> |1<br /> |}<br /> [[File:BE-TS Vacuum Extended Reach (Rotary Actuator) 2.png|alt=BE-TS Vacuum Extended Reach (Rotary Actuator)|frameless|547x547px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41255005<br /> |ARM-EXTENSION-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0416<br /> |CYLINDER-EXTENDED REACH-VACUUM<br /> |<br /> |''2 1/2&quot; X 12&quot; Cylinder''<br /> |1<br /> |-<br /> |3<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JICM X #6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |41257031<br /> |PIN-CLEVIS END<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |00197036<br /> |PIN-ROD END<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1058<br /> |PIN-HITCH<br /> |<br /> |<br /> |4<br /> |}<br /> [[File:BE-TS Vacuum Extended Reach (Rotary Actuator) 3.png|alt=BE-TS Vacuum Extended Reach (Rotary Actuator) 3|frameless|541x541px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41255004<br /> |HOUSING-EXTENDED REACH-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41257030<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |41258002<br /> |PLATE-BEARING<br /> |80258001<br /> |''Side''<br /> |2<br /> |-<br /> |8<br /> |41258005<br /> |PLATE-SHIM<br /> |80258001<br /> |''Side''<br /> |2<br /> |-<br /> |9<br /> |41258003<br /> |PLATE-BEARING<br /> |80258001<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |10<br /> |41258004<br /> |PLATE-SHIM<br /> |80258001<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |11<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |28<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |28<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Extended Reach (Rotary Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Extended Reach Rotary Actuator.png|alt=BE-TS Extended Reach Rotary Actuator|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43046001<br /> |ROTARY ACTUATOR<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |80000002<br /> |ROTARY ACTUATOR BASE ASSEMBLY<br /> |<br /> |''Without Actuator''<br /> |1<br /> |-<br /> |2A<br /> |N/A<br /> |VERTICAL CARRIER PLATE-OUTER<br /> |<br /> |''Included with 80000002''<br /> |2<br /> |-<br /> |2B<br /> |N/A<br /> |VERTICAL CARRIER PLATE-INNER<br /> |<br /> |''Included with 80000002''<br /> |1<br /> |-<br /> |2C<br /> |N/A<br /> |CARRIER BASE PLATE<br /> |<br /> |''Included with 80000002''<br /> |1<br /> |-<br /> |3<br /> |HW1070<br /> |PIN-PULL DOWEL-5/8&quot; X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0508<br /> |BOLT-SHCS-1/2-13 X 3/4&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW1045<br /> |PIN-PULL DOWEL-3/8&quot; X 1 1/2&quot;<br /> |<br /> |''Included with 80000002''<br /> |6<br /> |-<br /> |6<br /> |HW0412<br /> |BOLT-SHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |''Included with 80000002''<br /> |12<br /> |-<br /> |7<br /> |H0010<br /> |FITTING-BULKHEAD-3/4-16 X #4 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |4<br /> |}<br /> [[File:BE-TS Extended Reach Rotary Actuator 2.png|alt=BE-TS Extended Reach Rotary Actuator |frameless|535x535px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PT0634<br /> |BRACKET-MALE END<br /> |<br /> |''Sols as a set''<br /> |1<br /> |-<br /> |2<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |10<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |PT0627<br /> |HOSE CARRIER<br /> |<br /> |''14 links required''<br /> |39&quot;<br /> |-<br /> |7<br /> |PT0634<br /> |BRACKET-FEMALE END<br /> |<br /> |''Sols as a set''<br /> |1<br /> |-<br /> |8<br /> |HC0262<br /> |VALVE-CROSS PORT RELIEF<br /> |<br /> |<br /> |1<br /> |-<br /> |8a<br /> |43046003<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''† For Item 8 (Not shown)''<br /> |2<br /> |-<br /> |9<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |H1546<br /> |ADAPTER-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |H1617<br /> |ADAPTER-45 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HC0237<br /> |VALVE-SEQUENCING<br /> |<br /> |<br /> |1<br /> |-<br /> |12a<br /> |43046005<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''† For Item 12 (Not shown)''<br /> |A/R<br /> |-<br /> |13<br /> |HW0317<br /> |BOLT-HHCS-1/4-20 X 3 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |H1560<br /> |ADAPTER-45 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |H1600<br /> |ADAPTER-90 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Cartridges are for replacement only''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Extended Reach (Rotary Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Extended Reach (Rotary Actuator).png|alt=BE-TS Magnet Extended Reach (Rotary Actuator)|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055011<br /> |ARM-EXTENSION-MAGNET<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0415<br /> |CYLINDER-EXTENDED REACH-MAGNET<br /> |<br /> |''2 1/2&quot; X 8&quot; Cylinder''<br /> |1<br /> |-<br /> |3<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JICM X #6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CLEVIS END<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-ROD END<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-EXTERNAL-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW1043<br /> |CLAMP-CYLINDER<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |43057044-2<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |43058019<br /> |SUPPORT-CABLE-BAND CLAMP<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> [[File:BE-TS Magnet Extended Reach (Rotary Actuator) 2.png|alt=BE-TS Magnet Extended Reach (Rotary Actuator) |frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055012<br /> |HOUSING-EXTENDED REACH-MAGNET<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |43058013<br /> |PLATE-BEARING-SIDE<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |43058016<br /> |PLATE-SHIM-SIDE<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |43058014<br /> |PLATE-BEARING-UPPER/LOWER<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43058015<br /> |PLATE-SHIM-UPPER/LOWER<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |24<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |24<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Extended Reach End Plate&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Extended Reach End Plate.png|alt=BE-TS Extended Reach End Plate|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |CARRIER SHAFT-EXTRACTOR ARM<br /> |<br /> |''† 3-Hole version''<br /> |A/R<br /> |-<br /> |2<br /> |PT0413<br /> |COLLAR-SHAFT-3&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |50057009<br /> |PLATE-END-3 HOLE<br /> |<br /> |''Replacement part only''<br /> |4<br /> |-<br /> |4<br /> |50057010<br /> |SHIM-END PLATE<br /> |<br /> |''†† See notes''<br /> |A/R<br /> |-<br /> |5<br /> |HW1076<br /> |BOLT-FHSCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |6<br /> |43057045<br /> |CARRIER SHAFT-EXTRACTOR ARM<br /> |<br /> |''1-Hole version''<br /> |2<br /> |-<br /> |7<br /> |43017076<br /> |PLATE-END-1 HOLE<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† 3-Hole Carrier Shaft no longer available. Must replace 3-Hole shaft with current, 1-Hole version along with new ennd plates &amp; hardware.'' <br /> |-<br /> | colspan=&quot;6&quot; |''†† Shim quantity varies due to manufacturing tolerances.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Carrier Shafts &amp; Bearings&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Carrier Shafts &amp; Bearings (Helical Actuator).png|alt=BE-TS Carrier Shafts &amp; Bearings (Helical Actuator)|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43057045<br /> |CARRIER SHAFT-EXTRACTOR ARM<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |2<br /> |43054007<br /> |BEARING-EXTRACTOR ARM CARRIER<br /> |80252002<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0412<br /> |BOLT-SHCS-3/8-16 X 1 1/4&quot;<br /> |80252002<br /> |<br /> |16<br /> |-<br /> |4<br /> |PT0413<br /> |COLLAR-SHAFT-3&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |50057010<br /> |SHIM-END PLATE<br /> |<br /> |<br /> |A/R<br /> |-<br /> |6<br /> |43017076<br /> |PLATE-END-1 HOLE<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |PT0624<br /> |FITTING-ZERK<br /> |80252002<br /> |''Not shown''<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† See Extended Reach End Plate section for Extended Reach equipped units.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Drive Nut Assembly (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Drive Nut Assembly (Helical Actuator).png|alt=BE-TS Drive Nut Assembly (Helical Actuator)|frameless|600x600px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43054006<br /> |DRIVE NUT ASSEMBLY<br /> |80252003<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0426<br /> |BOLT-SHCS-3/8-16 X 5 1/2&quot;<br /> |80252003<br /> |''† See notes''<br /> |4<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |80252003<br /> |''† See notes''<br /> |4<br /> |-<br /> |4<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |80252003<br /> |''† See notes''<br /> |4<br /> |-<br /> |5<br /> |PT0624<br /> |FITTING-ZERK<br /> |80252003<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† It is recommended to replce mounting hardware when replacing Drive Nut Assembly.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Swing Arms &amp; Actuator (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;[Discontinued] Helical Actuator&lt;/big&gt;''''' ====<br /> [[File:BE-TS Swing Arms &amp; Actuator (Helical Actuator).png|alt=BE-TS [Discontinued] Swing Arms &amp; Actuator (Helical Actuator)|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |HELICAL ACTUATOR<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |43057046<br /> |ACTUATOR BASE PLATE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43058022<br /> |SPACER-ACTUATOR<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0725<br /> |BOLT-HHCS-3/4-16 X 4-3/4&quot;-GR8<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0066<br /> |NUT-JAM-3/4-16-GR8<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43055013<br /> |SWING ARM-LHS<br /> |<br /> | rowspan=&quot;6&quot; |''†† See notes''<br /> |1<br /> |-<br /> |7<br /> |HW0620<br /> |BOLT-HHCS-5/8-11 X 1-1/4&quot;<br /> |<br /> |6<br /> |-<br /> |8<br /> |HW0013<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |6<br /> |-<br /> |9<br /> |43055014<br /> |SWING ARM-RHS<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1-1/4&quot;<br /> |<br /> |6<br /> |-<br /> |11<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |6<br /> |-<br /> |12<br /> |43042008<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |43042010<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE, LONG<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |H1619<br /> |ADAPTER-90 DEG-#6 JICM X #4 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |H0010<br /> |FITTING-H-BULKHEAD-1/4 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |H1504<br /> |ADAPTER-#6 JICM X #4 NPTM<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW1082<br /> |CLAMP-HOSE<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Discontinued Helical Actuator no longer available. Must replace with current Helical Actuator Retro Kit 80252032. See [Current] Helical Actuator.'' <br /> <br /> ''†† Swing arms manufactured prior to January 2022 use 10 bolts &amp; washers per Swing Arm.'' <br /> |}<br /> <br /> ==== '''''&lt;big&gt;[Current] Helical Actuator&lt;/big&gt;''''' ====<br /> [[File:BE-TS (Current) Swing Arms &amp; Actuator (Helical Actuator).png|alt=BE-TS (Current) Swing Arms &amp; Actuator (Helical Actuator)|frameless|544x544px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |N/A<br /> |43052020<br /> |HELICAL ACTUATOR ASSEMBLY<br /> |<br /> |''Includes Items 1 through 17''<br /> |1<br /> |-<br /> |1<br /> |HC0180<br /> |HELICAL ACTUATOR<br /> |80252032<br /> |<br /> |1<br /> |-<br /> |2<br /> |43057046<br /> |ACTUATOR BASE PLATE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43058022<br /> |SPACER-ACTUATOR<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0725<br /> |BOLT-HHCS-3/4-16 X 4-3/4&quot;-GR8<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0066<br /> |NUT-JAM-3/4-16-GR8<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43055013<br /> |SWING ARM-LHS<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0620<br /> |BOLT-HHCS-5/8-11 X 1-1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |8<br /> |HW0013<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |9<br /> |43055014<br /> |SWING ARM-RHS<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1-1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |11<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |12<br /> |43042011<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE, 90 DEG<br /> |80252032<br /> |''† See notes''<br /> |1<br /> |-<br /> |13<br /> |43042012<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE, SHORT<br /> |80252032<br /> |''† See notes''<br /> |1<br /> |-<br /> |14<br /> |H1619<br /> |ADAPTER-90 DEG-#6 JICM X #4 SAEM<br /> |80252032<br /> |<br /> |2<br /> |-<br /> |15<br /> |H0010<br /> |FITTING-H-BULKHEAD-1/4 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |H1504<br /> |ADAPTER-#6 JICM X #4 NPTM<br /> |80252032<br /> |<br /> |1<br /> |-<br /> |17<br /> |H1691<br /> |ADAPTER-45 DEG-#6 JICM X #4 NPTM<br /> |80252032<br /> |''† See notes''<br /> |1<br /> |-<br /> |18<br /> |HW1082<br /> |CLAMP-HOSE<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Hard-Pipes and 45 degree adapter required if replacing discontinued actuator with current Actuator Kit Part # 80252032 required for discontinued actuator replacement.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Swing Arm Stops &amp; Tie Plate&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Swing Arm Stops &amp; Tie Plate (Helical Actuator).png|alt=BE-TS Swing Arm Stops &amp; Tie Plate (Helical Actuator)|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43057050<br /> |TIE PLATE-HELICAL SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0113<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0010<br /> |NUT-JAM-5/8-11<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |43057052<br /> |STOP-POLY-SWING ARM<br /> |<br /> |''† See notes''<br /> |4<br /> |-<br /> |6<br /> |HW0441<br /> |BOLT-FHSCS-3/8-16 X 1-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW0031<br /> |NUT-LOCK-3/8-16, DEFORMED THREAD<br /> |<br /> |''† † See notes''<br /> |4<br /> |-<br /> |8<br /> |44555002<br /> |SWING ARM STOP<br /> |<br /> |''Single compartment use only''<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Replacement Poly Stop design updated from Square to Round. Stop Spacers not required with current, Round-Style Stops.''<br /> |-<br /> | colspan=&quot;6&quot; |''† † Deformed Thread Lock Nut replaces Acorn Nut and Split Lock Washer used previously.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Push/Pull Arm Mounting (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Push-Pull Arm Mounting.png|alt=BE-TS Push-Pull Arm Mounting (Helical Actuator)|frameless|542x542px]]<br /> {| class=&quot;wikitable&quot;<br /> ! rowspan=&quot;2&quot; |ITEM<br /> ! rowspan=&quot;2&quot; |BHS PART NUMBER<br /> ! rowspan=&quot;2&quot; |DESCRIPTION<br /> ! rowspan=&quot;2&quot; |REF. KIT NO.<br /> ! rowspan=&quot;2&quot; |NOTES<br /> ! colspan=&quot;3&quot; |NO. REQ<br /> |-<br /> !BE-24<br /> !BE-36<br /> !BE-42<br /> |-<br /> | rowspan=&quot;2&quot; |1<br /> |41655008<br /> |EXTENSION-ARM<br /> |<br /> |''†BE-36 units only''<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |1<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |43455001<br /> |EXTENSION-ARM<br /> |<br /> |''†BE-42 units only''<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |1<br /> |-<br /> |2<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> | colspan=&quot;2&quot; |12<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |12<br /> | colspan=&quot;2&quot; |24<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> | colspan=&quot;2&quot; |12<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |6<br /> | colspan=&quot;2&quot; |12<br /> |-<br /> ! colspan=&quot;8&quot; |NOTES<br /> |-<br /> | colspan=&quot;8&quot; |''† BE-24 units do not utilize an Arm Extension.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Extractor Arm (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Non-Pivoting Vacuum Cup Arm (Helical Actuator)&lt;/big&gt;''''' ====<br /> [[File:BE-TS Non-Pivoting Vacuum Cup Arm (Helical Actuator).png|alt=BE-TS Non-Pivoting Vacuum Cup Arm (Helical Actuator)|frameless|578x578px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0428<br /> |STUD-VACUUM-3/8-16 X 5&quot;<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |2<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |HW-KIT-2<br /> |<br /> |40<br /> |-<br /> |3<br /> |HW1001<br /> |SPRING-3/8&quot;<br /> |HW-KIT-2<br /> |<br /> |24<br /> |-<br /> |4<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0424<br /> |NUT-JAM-3/8-16<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |6<br /> |P0402<br /> |HOSE BARB-1/4&quot; X #4 MNPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |REF<br /> |43052014<br /> |ADJUSTABLE PUSH-PULL ARM<br /> |<br /> |''Includes Items 7 through 11''<br /> |A/R<br /> |-<br /> |7<br /> |43055018<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |43055019<br /> |VACUUM CUP MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Pivoting Vacuum Cup Arm (Helical Actuator)&lt;/big&gt;''''' ====<br /> [[File:BE-TS Pivoting Vacuum Cup Arm (Helical Actuator).png|alt=BE-TS Pivoting Vacuum Cup Arm (Helical Actuator)|frameless|525x525px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43052014<br /> |ADJUSTABLE PUSH-PULL ARM<br /> |<br /> |''Includes Items 1 through 5''<br /> |A/R<br /> |-<br /> |1<br /> |43055018<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43055019<br /> |VACUUM CUP MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |43055020<br /> |MOUNT-PIVOT-VACUUM CUP<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |PT0470<br /> |BEARING-PIVOT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0525<br /> |BOLT-CARRIAGE-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |9<br /> |HW0524<br /> |BOLT-CARRIAGE-1/2-13 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |11<br /> |HW0008<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |16<br /> |-<br /> |12<br /> |43058009<br /> |PLATE-ROTATION STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |43058003<br /> |SLEEVE-STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |43058010<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |4<br /> |-<br /> |16<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |43037002-2<br /> |SUPPORT-CABLE RESTRAINT<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |21<br /> |P0506<br /> |ELBOW-STR-90 DEG-#4 NPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |22<br /> |P0402<br /> |HOSE BARB-1/4&quot; X #4 MNPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |23<br /> |43057056-2<br /> |BRACKET-HOSE SUPPORT<br /> |<br /> |<br /> |2<br /> |-<br /> |24<br /> |PL0507<br /> |GROMMET-5/8&quot; I.D.<br /> |<br /> |<br /> |2<br /> |-<br /> |25<br /> |P0302<br /> |HOSE-VACUUM-1/4&quot; I.D.<br /> |<br /> |''2 pieces at 48&quot; each''<br /> |96&quot;<br /> |-<br /> |26<br /> |HW0443<br /> |BOLT-HHCS-3/8-16 X 3-1/2&quot;<br /> |HW-KIT-3<br /> |<br /> |8<br /> |-<br /> |27<br /> |HW1001<br /> |SPRING-3/8&quot;<br /> |HW-KIT-3<br /> |<br /> |16<br /> |-<br /> |28<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |HW-KIT-3<br /> |<br /> |32<br /> |-<br /> |29<br /> |HW0424<br /> |NUT-JAM-3/8-16<br /> |HW-KIT-3<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Cup Rotation Stop (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Vacuum Cup Rotation Stop (Helical Actuator).png|alt=BE-TS Vacuum Cup Rotation Stop (Helical Actuator)|frameless|583x583px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |445558001<br /> |PLATE-ROTATION STOP<br /> |<br /> |''† Single compartment units only''<br /> |2<br /> |-<br /> |2<br /> |HW0525<br /> |BOLT-CARRIAGE-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0524<br /> |BOLT-CARRIAGE-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0008<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Components (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Vacuum Components (Helical Actuator).png|alt=BE-TS Vacuum Components (Helical Actuator)|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43058021<br /> |STIFFENER PLATE-HELICAL SWING ARM<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |24<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |5<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |12<br /> |-<br /> |6<br /> |P0005<br /> |PUMP-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |P0207<br /> |VALVE-VACUUM RELEASE<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |P0208<br /> |FILTER-HI FLOW<br /> |<br /> |<br /> |3<br /> |-<br /> |9<br /> |H0011<br /> |NIPPLE-#4 X 2&quot;-BRASS<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |P0502<br /> |TEE-#4 FNPT-BRASS<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |P0506<br /> |ELBOW-STR-90 DEG-#4 NPT-BRASS<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |P0503<br /> |NIPPLE-#4 NPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |P0402<br /> |HOSE BARB-1/4&quot; X #4 MNPT-BRASS<br /> |<br /> |<br /> |6<br /> |-<br /> |14<br /> |P0111<br /> |FILTER-VACUUM-IN-LINE<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0206<br /> |SCREW-RHMS-#10-32 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |43037014-2<br /> |BRACKET-CABLE RESTRAINT<br /> |<br /> |<br /> |1<br /> |-<br /> |17<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |18<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |21<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |22<br /> |E0624<br /> |CONNECTOR-1/2&quot;<br /> |<br /> |''Includes Lock Nut''<br /> |1<br /> |-<br /> |23<br /> |HW0212<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Arm (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Arm (Helical Actuator).png|alt=BE-TS Magnet Arm (Helical Actuator)|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43052014<br /> |ADJUSTABLE PUSH-PULL ARM<br /> |<br /> |''Includes Items 1 through 5''<br /> |A/R<br /> |-<br /> |1<br /> |43055018<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43055019<br /> |VACUUM CUP MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |43055016<br /> |MOUNT-PIVOT-MAGNET<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |PT0470<br /> |BEARING-PIVOT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0525<br /> |BOLT-CARRIAGE-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |9<br /> |HW0524<br /> |BOLT-CARRIAGE-1/2-13 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |11<br /> |HW0008<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |16<br /> |-<br /> |12<br /> |43058009<br /> |PLATE-ROTATION STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |43058003<br /> |SLEEVE-STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |43058010<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |18<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |43037002-2<br /> |SUPPORT-CABLE RESTRAINT<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |21<br /> |E0334-6'<br /> |CORD-5 PIN FEMALE<br /> |<br /> |''With 72&quot; lead''<br /> |2<br /> |-<br /> |22<br /> |E1041<br /> |WIRE LOOM-SPIRAL-3/8&quot;<br /> |<br /> |''2 pieces at 24&quot; each''<br /> |48&quot;<br /> |-<br /> |23<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |2<br /> |-<br /> |24<br /> |43057037<br /> |INSULATOR-BOTTOM<br /> |<br /> |<br /> |2<br /> |-<br /> |25<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |26<br /> |41657008<br /> |SLIDE-MAGNET<br /> |<br /> |<br /> |2<br /> |-<br /> |27<br /> |HW0314<br /> |BOLT-FHSCS-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Assembly (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Assembly (Helical Actuator).png|alt=BE-TS Magnet Assembly (Helical Actuator)|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43032009<br /> |MAGNET ASSEMBLY<br /> |<br /> |''Includes Items 1 through 12''<br /> |A/R<br /> |-<br /> |1<br /> |N/A<br /> |ELECTROMAGNET-95VDC<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |E0314<br /> |SENSOR-PROXIMITY-30MM<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |41657002<br /> |COVER-PROXIMITY SENSOR HOUSING<br /> |<br /> |''Rear''<br /> |2<br /> |-<br /> |4<br /> |HW1065<br /> |SCREW-SHCS-#6-32 X 3/8&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW1066<br /> |WASHER-LOCK-#6<br /> |<br /> |<br /> |8<br /> |-<br /> |6<br /> |E0335<br /> |RECEPTACLE-5 PIN MALE<br /> |<br /> |''With 12&quot; lead''<br /> |2<br /> |-<br /> |7<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |E0376<br /> |INDICATOR LIGHT<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |9<br /> |41657003<br /> |COVER-PROXIMITY SENSOR HOUSING<br /> |80252015<br /> |''Front''<br /> |2<br /> |-<br /> |10<br /> |HW0138<br /> |SCREW-FHSCS-#8-32 X 3/8&quot;<br /> |80252015<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |80252014<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW1002<br /> |SPRING-1/2&quot;<br /> |80252014<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |80252014<br /> |<br /> |8<br /> |-<br /> |14<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |80252014<br /> |<br /> |4<br /> |-<br /> |15<br /> |E0336<br /> |METAL OXIDE VARISTOR<br /> |<br /> |''Not shown''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Extractors built or replacement magnets shipped prior to October 2021 used Multi-Piece Indicator Lights with replaceable bulb and lens and are no longer available. Current Indicator Light is a 1-Piece LED assembly. Replacement of any Multi-Piece component requires replacing entire assembly with current, 1-Piece Indicator Light.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Components (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Components (Helical Actuator).png|alt=BE-TS Magnet Components (Helical Actuator)|frameless|534x534px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43058021<br /> |STIFFENER PLATE-HELICAL SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43057051-2<br /> |STIFFENER-MAGNET-HELICAL SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |4<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |24<br /> |-<br /> |5<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |6<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |12<br /> |-<br /> |7<br /> |PL0307<br /> |INSULATOR-MALE STUD<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0106<br /> |WASHER-FLAT-5/16&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |HW0105<br /> |WASHER-LOCK-5/16&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0004<br /> |NUT-HEX-5/16-18<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |12<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |13<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |14<br /> |E1016<br /> |FUSE HOLDER<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |E0325<br /> |FUSE-7 AMP-250VAC<br /> |<br /> |''FLM-7 or FNM-7''<br /> |1<br /> |-<br /> |16<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |17<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Panel (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Panel (Helical Actuator).png|alt=BE-TS Magnet Panel (Helical Actuator)|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41637001<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41637002<br /> |WIRE WAY-SHORT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |41637003<br /> |WIRE WAY-LONG<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |41637004<br /> |TRACK-MOUNTING-SHORT<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |41637005<br /> |TRACK-MOUNTING-LONG<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> | rowspan=&quot;3&quot; |''Mounting track hardware (Not shown)''<br /> |10<br /> |-<br /> |7<br /> |HW0132<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |10<br /> |-<br /> |8<br /> |HW0133<br /> |NUT-NILN-#8-32<br /> |<br /> |16<br /> |-<br /> |9<br /> |E1020<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |12<br /> |-<br /> |10<br /> |E1040<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |E1330<br /> |END ANCHOR<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |E1009<br /> |RECTIFIER-FULL WAVE BRIDGE<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |HW0135<br /> |SCREW-RHMS-#8-32 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |E1313<br /> |SOCKET-RELAY-8 PIN<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |E0331<br /> |RELAY-DPDT-110VAC<br /> |<br /> |''With Indicator Light''<br /> |2<br /> |-<br /> |16<br /> |HW0139<br /> |SCREW-RHMS-#8-32 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Extended Reach Hydraulics (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== &lt;big&gt;''[Discontinued] Helical Actuator''&lt;/big&gt; ====<br /> [[File:BE-TS (Discontinued) Helical Actuator.png|alt=BE-TS (Discontinued) Helical Actuator|frameless|546x546px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43042009<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |H0010<br /> |FITTING-BULKHEAD-3/4-16 X #4 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |43055017<br /> |ELBOW-BULKHEAD<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> | rowspan=&quot;3&quot; |7<br /> |4-48-0402-0402<br /> |HYD HOSE-1/4&quot; X 48&quot; (BE-24 UNITS)<br /> |<br /> | rowspan=&quot;3&quot; |''Cylinder rod-end hose''<br /> | rowspan=&quot;3&quot; |1<br /> |-<br /> |4-54-0402-0402<br /> |HYD HOSE-1/4&quot; X 54&quot; (BE-36 UNITS)<br /> |<br /> |-<br /> |4-56-0402-0402<br /> |HYD HOSE-1/4&quot; X 56&quot; (BE-42 UNITS)<br /> |<br /> |-<br /> | rowspan=&quot;3&quot; |8<br /> |4-38-0402-0402<br /> |HYD HOSE-1/4&quot; X 38&quot; (BE-24 UNITS)<br /> |<br /> | rowspan=&quot;3&quot; |''Cylinder rod-end hose''<br /> | rowspan=&quot;3&quot; |1<br /> |-<br /> |4-44-0402-0402<br /> |HYD HOSE-1/4&quot; X 44&quot; (BE-36 UNITS)<br /> |<br /> |-<br /> |4-46-0402-0402<br /> |HYD HOSE-1/4&quot; X 46&quot; (BE-42 UNITS)<br /> |<br /> |-<br /> |9<br /> |41257035<br /> |STANDOFF-HOSE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW1093<br /> |CLAMP-CABLE-3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0311<br /> |BOLT-FHSCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> ==== &lt;big&gt;''[Current] Helical Actuator''&lt;/big&gt; ====<br /> [[File:BE-TS (Current) Helical Actuator.png|alt=BE-TS (Current) Helical Actuator|frameless|567x567px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43042013<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |H0010<br /> |FITTING-BULKHEAD-3/4-16 X #4 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |43055021<br /> |ELBOW-BULKHEAD<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> | rowspan=&quot;3&quot; |7<br /> |4-48-0402-0402<br /> |HYD HOSE-1/4&quot; X 48&quot; (BE-24 UNITS)<br /> |<br /> | rowspan=&quot;3&quot; |''Cylinder rod-end hose''<br /> | rowspan=&quot;3&quot; |1<br /> |-<br /> |4-54-0402-0402<br /> |HYD HOSE-1/4&quot; X 54&quot; (BE-36 UNITS)<br /> |<br /> |-<br /> |4-56-0402-0402<br /> |HYD HOSE-1/4&quot; X 56&quot; (BE-42 UNITS)<br /> |<br /> |-<br /> | rowspan=&quot;3&quot; |8<br /> |4-38-0402-0402<br /> |HYD HOSE-1/4&quot; X 38&quot; (BE-24 UNITS)<br /> |<br /> | rowspan=&quot;3&quot; |''Cylinder rod-end hose''<br /> | rowspan=&quot;3&quot; |1<br /> |-<br /> |4-44-0402-0402<br /> |HYD HOSE-1/4&quot; X 44&quot; (BE-36 UNITS)<br /> |<br /> |-<br /> |4-46-0402-0402<br /> |HYD HOSE-1/4&quot; X 46&quot; (BE-42 UNITS)<br /> |<br /> |-<br /> |9<br /> |41257035<br /> |STANDOFF-HOSE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW1093<br /> |CLAMP-CABLE-3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0311<br /> |BOLT-FHSCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Extended Reach (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== &lt;big&gt;'''''Non-Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator)'''''&lt;/big&gt; ====<br /> [[File:BE-TS Non-Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator).png|alt=BE-TS Non-Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator)|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41255005<br /> |ARM-EXTENSION<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41255004<br /> |HOUSING-EXTENDED REACH<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0416<br /> |CYLINDER-2 1/2&quot; X 12&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CYLINDER-REAR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-CYLINDER-ROD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JIC X # 6 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |28<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |28<br /> |-<br /> |15<br /> |41258002<br /> |PLATE-BEARING<br /> |80258001<br /> |''Side''<br /> |2<br /> |-<br /> |16<br /> |41258005<br /> |PLATE-SHIM<br /> |80258001<br /> |''Side''<br /> |2<br /> |-<br /> |17<br /> |41258003<br /> |PLATE-BEARING<br /> |80258001<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |18<br /> |41258004<br /> |PLATE-SHIM<br /> |80258001<br /> |''Upper / lower''<br /> |2<br /> |}<br /> &lt;big&gt;'''''Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator)'''''&lt;/big&gt;<br /> <br /> [[File:BE-TS Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator).png|alt=BE-TS Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator)|frameless|553x553px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055011<br /> |ARM-EXTENSION<br /> |<br /> |''Pivoting cup only''<br /> |1<br /> |-<br /> |2<br /> |43055012<br /> |HOUSING-EXTENDED REACH<br /> |<br /> |''Pivoting cup only''<br /> |1<br /> |-<br /> |3<br /> |HC0415<br /> |CYLINDER-2 1/2&quot; X 8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CYLINDER-REAR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-CYLINDER-ROD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JIC X # 6 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |24<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |24<br /> |-<br /> |15<br /> |43058013<br /> |PLATE-BEARING<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |16<br /> |43058016<br /> |PLATE-SHIM<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |17<br /> |43058014<br /> |PLATE-BEARING<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |18<br /> |43058015<br /> |PLATE-SHIM<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |19<br /> |HW1043<br /> |CLAMP-CYLINDER<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |43058019<br /> |SUPPORT-CABLE-BAND CLAMP<br /> |<br /> |<br /> |2<br /> |-<br /> |21<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |22<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |23<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |24<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Extended Reach (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== &lt;big&gt;'''''[Discontinued] Extended Reach Magnet Arm (Helical Actuator)'''''&lt;/big&gt; ====<br /> [[File:BE-TS (Discontinued) Extended Reach Magnet Arm (Helical Actuator).png|alt=BE-TS (Discontinued) Extended Reach Magnet Arm (Helical Actuator)|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055011<br /> |ARM-EXTENSION<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43055012<br /> |HOUSING-EXTENDED REACH<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0415<br /> |CYLINDER-2 1/2&quot; X 8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CYLINDER-REAR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-CYLINDER-ROD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JIC X # 6 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |24<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |24<br /> |-<br /> |15<br /> |43058013<br /> |PLATE-BEARING<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |16<br /> |43058016<br /> |PLATE-SHIM<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |17<br /> |43058014<br /> |PLATE-BEARING<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |18<br /> |43058015<br /> |PLATE-SHIM<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |19<br /> |HW1043<br /> |CLAMP-CYLINDER<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |43058019<br /> |SUPPORT-CABLE-BAND CLAMP<br /> |<br /> |<br /> |2<br /> |-<br /> |21<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |24<br /> |43057004-2<br /> |SUPPORT-CABLE-MAGNET<br /> |<br /> |<br /> |2<br /> |}<br /> &lt;big&gt;'''''[Current] Extended Reach Magnet Arm (Helical Actuator)'''''&lt;/big&gt;<br /> <br /> [[File:BE-TS (Current) Extended Reach Magnet Arm (Helical Actuator).png|alt=BE-TS (Current) Extended Reach Magnet Arm (Helical Actuator)|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |50055004<br /> |ARM-EXTENSION<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |50055005<br /> |HOUSING-EXTENDED REACH<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0415<br /> |CYLINDER-2 1/2&quot; X 8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CYLINDER-REAR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-CYLINDER-ROD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JIC X # 6 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |20<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |20<br /> |-<br /> |15<br /> |50058009<br /> |PLATE-BEARING<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |16<br /> |50058012<br /> |PLATE-SHIM<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |17<br /> |50058010<br /> |PLATE-BEARING<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |18<br /> |50058011<br /> |PLATE-SHIM<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |19<br /> |HW1043<br /> |CLAMP-CYLINDER<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |43058019<br /> |SUPPORT-CABLE-BAND CLAMP<br /> |<br /> |<br /> |2<br /> |-<br /> |21<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |24<br /> |43057004-2<br /> |SUPPORT-CABLE-MAGNET<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> == &lt;big&gt;Drive and Idler Wheels&lt;/big&gt; ==<br /> <br /> === &lt;big&gt;&lt;u&gt;Drive Wheel Mounting&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Drive Wheel Mounting.png|alt=BE-TS Drive Wheel Mounting|frameless|519x519px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0503<br /> |BOLT-HHCS-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |2<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |''Cylinder Bracket bolt only''<br /> |2<br /> |-<br /> |3<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> === &lt;big&gt;&lt;u&gt;'''Drive Wheel Motors'''&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Drive Wheel Motors.png|alt=BE-TS Drive Wheel Motors|frameless|535x535px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;2&quot; |1<br /> |43822001-6B<br /> |FLOOR DRIVE ASSEMBLY (W/ 200CC MOTOR)<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |43822004-6B<br /> |FLOOR DRIVE ASSEMBLY (W/ 400CC MOTOR)<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |2<br /> |43827004<br /> |PLATE-MOTOR MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0416<br /> |BOLT-SHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |H1612<br /> |ADAPTER-90 DEG-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |N/A<br /> |ROD-THREADED-1/2-13 X 7 3/4&quot;<br /> |<br /> |''†† See notes''<br /> |8<br /> |-<br /> |7<br /> |N/A<br /> |SPACER-DRIVE WHEEL-4.75&quot; LG<br /> |<br /> |''†† See notes''<br /> |8<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |43827006<br /> |SPACER-DRIVE WHEEL-4.125&quot; LG<br /> |<br /> |Must be ordered as a set of 4<br /> |8<br /> |-<br /> |11<br /> |HW0516<br /> |BOLT-HHCS-1/2-13 X 6 1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |12<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> | rowspan=&quot;2&quot; |13<br /> |N/A<br /> |MOTOR-HYDRAULIC-200CC<br /> |<br /> |''††† Keyed Shaft''<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |N/A<br /> |MOTOR-HYDRAULIC-400CC<br /> |<br /> |''††† Keyed Shaft''<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |14<br /> |HW1071<br /> |KEY-WOODRUFF-#808 STD<br /> |<br /> |<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |15<br /> |HC0124-6B<br /> |MOTOR-HYDRAULIC-200CC<br /> |<br /> |''† Spline Shaft''<br /> |2<br /> |-<br /> |HC0126-6B<br /> |MOTOR-HYDRAULIC-400CC<br /> |80322003<br /> |''† Spline Shaft''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† 200CC Motors required for units equipped with Parallel Drive Circuit.''<br /> ''400CC Motors required for units equipped with Series Drive Circuit.''<br /> <br /> See Cross Port Relief section to determine if unit is Parallel or Series equipped and approximate effectivity of each type.<br /> |-<br /> | colspan=&quot;6&quot; |''†† Parts obsolete and no longer available. Must replace with Items 10 &amp; 11.''<br /> |-<br /> | colspan=&quot;6&quot; |''††† Parts obsolete and no longer available. Must replace with Spline Drive Conversion Kit.''<br /> |}<br /> <br /> === &lt;big&gt;&lt;u&gt;'''Drive Wheel Bearings'''&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Drive Wheel Bearings.png|alt=BE-TS Drive Wheel Bearings|frameless|537x537px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43825001<br /> |FRAME-FLOOR DRIVE<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |C0510-1<br /> |WHEEL-10&quot; X 5&quot;-POLY<br /> |80322001<br /> |<br /> |2<br /> |-<br /> |3<br /> |43822003<br /> |SHAFT-WHEEL (W/ COUPLING BODY)<br /> |<br /> |''Available in multiple kits''<br /> |2<br /> |-<br /> |4<br /> |43897004<br /> |KEY-3/8&quot; X 4 3/4&quot;<br /> |80322001<br /> |<br /> |2<br /> |-<br /> |5<br /> |PT0430<br /> |FLANGE BEARING-4 BOLT-1 1/2&quot;<br /> |80322001<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |7<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |16<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |9<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |16<br /> |-<br /> |10<br /> |PT0321<br /> |CHAIN-COUPLING-#50<br /> |<br /> |''Includes connecting pin''<br /> |2<br /> |-<br /> |11<br /> |N/A<br /> |COUPLING BODY-TAPER BORE-#50<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |12<br /> |N/A<br /> |BUSHING-TAPER LOCK-1&quot;<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |13<br /> |HW0323<br /> |BOLT-HHCS-5/16-18 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |14<br /> |PT0330<br /> |COUPLING BODY-#50-SPLINE BORE<br /> |80322003<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW1110<br /> |RETAINING RING-1 1/2&quot;-HEAVY DUTY<br /> |<br /> |''†† Available in multiple kits''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Parts obsolete and no longer available. Spline Drive Conversion Kit required. Reuse of bushing after disassembly not recommended.'' <br /> |-<br /> | colspan=&quot;6&quot; |''† † Retaining Rings used on units shipped after 7/01/12. Units shipped from 7/01/13 are equipped with (2) Retaining Rings per shaft - (1) on each side of the wheel. Units shipped after 11/01/13 are equipped with only (1) Snap Rings as shown. Second Snap Ring is no longer used or required.''<br /> |-<br /> | colspan=&quot;6&quot; |''NOTE: Effectivity dates refer to dates new extractor units are shipped from the factory. Replacement part effectivity &lt;u&gt;'''may'''&lt;/u&gt; differ due to factory inventory levels at time of parts order. Consult factory if unsure of parts needed.''<br /> |}<br /> <br /> === &lt;big&gt;&lt;u&gt;'''Drive Wheel Assembly'''&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Drive Wheel Assembly.png|alt=BE-TS Drive Wheel Assembly|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43822005<br /> |RADIAL PISTON DRIVE WHEEL ASSEMBLY<br /> |<br /> |''Includes Items 1 through 6''<br /> |2<br /> |-<br /> |1<br /> |43825003<br /> |RADIAL PISTON DRIVE WHEEL MOUNT<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0160-1<br /> |400CC RADIAL PISTON MOTOR<br /> |<br /> |''Includes nuts &amp; studs''<br /> |1<br /> |-<br /> |REF<br /> |HC0160-STUD<br /> |STUD-M14-1.5 X 46MM<br /> |<br /> |''Replacement motor stud''<br /> |A/R<br /> |-<br /> |REF<br /> |HC0160-NUT<br /> |NUT-FLANGED HEX-M14-1.5<br /> |<br /> |''Replacement motor nut''<br /> |A/R<br /> |-<br /> |3<br /> |C0511<br /> |WHEEL-POLY-10 X 5&quot;-FLANGE MOUNT<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |5<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |6<br /> |-<br /> |7<br /> |H1612<br /> |ADAPTER-H-90 DEG-#10 SAEM X #8 JICM<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |H1539<br /> |ADAPTER-#8 JIC X #6 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1586<br /> |ADAPTER-90 DEG-#8 JICSW X #6 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |H0801<br /> |TEE-H-#6 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H1501<br /> |ADAPTER-#8 JIC X #6 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |H0200<br /> |REDUCER-#6 NPT X #4 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |H0206<br /> |PLUG-#4 NPT<br /> |<br /> |''† Left Drive Wheel only''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Plug used on Left Drive Wheel Assembly only. Hose from Left Drive Wheel Assembly is connected to tee on Right Drive Wheel Assembly.'' <br /> |}<br /> <br /> === &lt;big&gt;&lt;u&gt;'''Idler Casters'''&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Idler Casters.png|alt=BE-TS Idler Casters|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |C0500-1<br /> |CASTER-RIGID-10&quot; X 5&quot;-POLY<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |3<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |<br /> |''For Cylinder Bracket position'' <br /> |2<br /> |-<br /> |4<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |16<br /> |-<br /> |5<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |6<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> == &lt;big&gt;Electrical&lt;/big&gt; ==<br /> <br /> === '''&lt;u&gt;&lt;big&gt;AC Power Stanchion&lt;/big&gt;&lt;/u&gt;''' ===<br /> <br /> ==== '''&lt;big&gt;''Aero-Motive Energy Rail''&lt;/big&gt;''' ====<br /> [[File:BE-TS Aero-Motive Energy Rail.png|alt=BE-TS Aero-Motive Energy Rail|frameless|536x536px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43835001<br /> |STANCHION-POWER<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0511<br /> |BOLT-HHCS-1/2-13 X 3 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |46837014-2<br /> |TOW ARM-COLLECTOR TROLLEY<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |46838015<br /> |SPACER BLOCK-TOW ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW1030<br /> |U-BOLT-3/8-16 X 2&quot; X 5&quot;-SQUARE BEND<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .625&quot; to .750&quot;''<br /> |1<br /> |-<br /> |13<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |HW1051<br /> |EYE BOLT-3/8-16 X 5 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0126<br /> |WASHER-FLAT-3/8&quot;-FENDER<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |BD0010<br /> |TROLLEY-ENERGY RAIL<br /> |<br /> | rowspan=&quot;2&quot; |''Aero-Motive Rail only''<br /> <br /> ''(orange housing color)''<br /> |1<br /> |-<br /> |19<br /> |BD0100<br /> |BRUSH-TROLLEY<br /> |<br /> |4<br /> |}<br /> <br /> ==== '''&lt;big&gt;''Vahle Energy Rail''&lt;/big&gt;''' ====<br /> [[File:BE-TS Vahle Energy Rail.png|alt=BE-TS Vahle Energy Rail|frameless|535x535px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1A<br /> |BD0031<br /> |TROLLEY-ENERGY RAIL, KSL<br /> |<br /> | rowspan=&quot;3&quot; |''† Vahle KSL Rail only''<br /> <br /> ''(green housing color)''<br /> |1<br /> |-<br /> |2A<br /> |BD0040<br /> |BRUSH-PHASE, KSL<br /> |<br /> |3<br /> |-<br /> |3A<br /> |BD0041<br /> |BRUSH-GROUND, KSL<br /> |<br /> |1<br /> |-<br /> |1B<br /> |BD0231<br /> |TROLLEY-ENERGY RAIL, KBH<br /> |<br /> | rowspan=&quot;3&quot; |''† Vahle KBH Rail only''<br /> <br /> ''(gray housing color)''<br /> <br /> ''(Nots shown)''<br /> |1<br /> |-<br /> |2B<br /> |BD0240<br /> |BRUSH-PHASE, KBH<br /> |<br /> |3<br /> |-<br /> |3B<br /> |BD0241<br /> |BRUSH-GROUND, KBH<br /> |<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |4<br /> |BD0030<br /> |TOW ARM-COLLECTOR TROLLEY, KSL<br /> |<br /> |''† Vahle KSL Rail only''<br /> <br /> ''(green housing color)''<br /> |1<br /> |-<br /> |BD0230<br /> |TOW ARM-COLLECTOR TROLLEY, KBH<br /> |<br /> |''† Vahle KBH Rail only''<br /> <br /> ''(gray housing color)''<br /> |1<br /> |-<br /> |5<br /> |46838015<br /> |SPACER-BLOCK-TOW ARM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |6<br /> |41237083-2<br /> |BRACKET-TOW ARM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |7<br /> |HW1054<br /> |U-BOLT-5/16-18 X 2&quot; X 5&quot;-SQUARE BEND<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW0323<br /> |BOLT-HHCS-5/16-18 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0106<br /> |WASHER-FLAT-5/16&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0150<br /> |WASHER-FLAT-5/16&quot;-FENDER<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0105<br /> |WASHER-LOCK-5/16&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0004<br /> |NUT-HEX-5/16-18<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Verify Energy Rail type (KSL OR KBH) by the color of the energy rail housing.'' <br /> |-<br /> | colspan=&quot;6&quot; |''†† Not all units equipped with Tow Arm Bracket. Location of Spacer Block and/or Tow Arm Bracket may vary from configuration shown.'' <br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Control Panel&lt;/big&gt;&lt;/u&gt;''' ===<br /> '''&lt;big&gt;''[Discontinued] Control Panel for Units with 10 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS (Discontinued) Control Panel for Units with 10HP.png|alt=BE-TS (Discontinued) Control Panel for Units with 10HP|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-CONTROL PANEL-16&quot; X 14&quot; X 6&quot;<br /> |<br /> |CONSULT FACTORY<br /> |1<br /> |-<br /> |2<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |Grip size .250&quot; to.375&quot;<br /> |1<br /> |-<br /> |6<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |Grip size .625&quot; to .750&quot;<br /> |2<br /> |-<br /> |7<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |Grip size .500&quot; to .625&quot;<br /> |2<br /> |-<br /> |8<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |''Not shown''<br /> |1<br /> |-<br /> |9<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |''Not shown''<br /> |4<br /> |}<br /> [[File:BE-TS (Discontinued) Control Panel for Units with 10HP Detail.png|alt=BE-TS (Discontinued) Control Panel for Units with 10HP Detail|frameless|556x556px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0640<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |BLANK PANEL WITHOUT HOLES<br /> |1<br /> |-<br /> |2<br /> |E0120<br /> |MAGNETIC STARTER-NEMA 1 3/4&quot;<br /> |<br /> |WITH OVERLOAD<br /> |1<br /> |-<br /> |3<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |<br /> |17<br /> |-<br /> |4<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |<br /> |17<br /> |-<br /> |5<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |17<br /> |-<br /> |6<br /> |E0207-1<br /> |TRANSFORMER<br /> |<br /> |480VAC TO 120VAC, 0.75 Kva<br /> |1<br /> |-<br /> |7<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |HW0003<br /> |NUT-NILN-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |E1023<br /> |WIREWAY<br /> |<br /> |SOLD BY LENGTH<br /> |A/R<br /> |-<br /> |11<br /> |E1024<br /> |MOUNTING TRACK<br /> |<br /> |SOLD BY LENGTH<br /> |A/R<br /> |-<br /> |12<br /> |E1020<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |16<br /> |-<br /> |13<br /> |E1040<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |E1330<br /> |END ANCHOR<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |E0341<br /> |GROUND LUG<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |E0902<br /> |FUSE-6A<br /> |<br /> |FLM-6<br /> |1<br /> |}<br /> <br /> ==== '''&lt;big&gt;''[Current] Control Panel for Units with 20 HP Power Unit''&lt;/big&gt;''' ====<br /> [[File:BE-TS (Current) Control Panel for Units with 20HP.png|alt=BE-TS (Current) Control Panel for Units with 20HP|frameless|601x601px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-24&quot; X 16&quot; X 6&quot;<br /> |<br /> |CONSULT FACTORY<br /> |1<br /> |-<br /> |2<br /> |E0123-1<br /> |HANDLE-DISCONNECT<br /> |<br /> |INCL. MOUNTING SCREWS<br /> |1<br /> |-<br /> |3<br /> |E0662<br /> |RESTRAINT-3/4&quot;-LIQUID TIGHT<br /> |<br /> |INCL. LOCKNUT<br /> |1<br /> |-<br /> |4<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |GRIP SIZE .500&quot; TO .625&quot;<br /> |2<br /> |-<br /> |5<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |GRIP SIZE .625&quot; TO .750&quot;<br /> |1<br /> |-<br /> |6<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |7<br /> |E0661<br /> |RESTRAINT-3/4&quot;-90 DEG-LIQUID TIGHT<br /> |<br /> |INCL. LOCKNUT<br /> |1<br /> |-<br /> |8<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |GRIP SIZE .250&quot; TO .375&quot;<br /> |1<br /> |-<br /> |9<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |GRIP SIZE .450&quot; TO .560&quot;<br /> |2<br /> |-<br /> |10<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |11<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |}<br /> [[File:BE-TS (Current) Control Panel for Units with 20HP Details.png|alt=BE-TS (Current) Control Panel for Units with 20HP Details|frameless|645x645px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |YE0506<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |''Blank panel without holes''<br /> |1<br /> |-<br /> |2<br /> |YE0205-1<br /> |SWITCH-DISCONNECT-80A<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43036007<br /> |SHAFT-DISCONNECT<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |YE0409<br /> |FUSE HOLDER-SINGLE POLE<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |E0914<br /> |FUSE-10A<br /> |<br /> |''FLM-10''<br /> |1<br /> |-<br /> |6<br /> |E0902<br /> |FUSE-6A<br /> |<br /> |''FLM-6''<br /> |1<br /> |-<br /> |7<br /> |E0903<br /> |FUSE-12A<br /> |<br /> |''FLM-12''<br /> |1<br /> |-<br /> |8<br /> |YE0402<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |17<br /> |-<br /> |9<br /> |YE0405<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |YE0406<br /> |END ANCHOR<br /> |<br /> |<br /> |6<br /> |-<br /> |11<br /> |E0136<br /> |FUSE HOLDER-3 POLE<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |YE0901<br /> |FUSE-40A<br /> |<br /> |JTD-40-ID<br /> |3<br /> |-<br /> |13<br /> |E1013<br /> |BASE-RELAY<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |E1012<br /> |RELAY-11 PIN<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |E0137<br /> |FUSE HOLDER-2 POLE<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |YE0902<br /> |FUSE-10A<br /> |<br /> |''KLDR-10''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |17<br /> |N/A<br /> |CONTACTOR, &quot;A40&quot; SERIES<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |E0132-1<br /> |CONTACTOR, &quot;AF38&quot; SERIES<br /> |80332009<br /> |<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |18<br /> |N/A<br /> |OVERLOAD, &quot;TA&quot; SERIES<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |E0131-1<br /> |OVERLOAD, &quot;TF&quot; SERIES<br /> |80332009<br /> |<br /> |1<br /> |-<br /> |19<br /> |E1023<br /> |WIREWAY<br /> |<br /> |''Sold by length''<br /> |A/R<br /> |-<br /> |20<br /> |E0908<br /> |MOUNTING RAIL<br /> |<br /> |''Sold by length''<br /> |A/R<br /> |-<br /> |21<br /> |E1070<br /> |GROUND BAR-4 POSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |22<br /> |E1071<br /> |GROUND BAR-7 POSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |23<br /> |HW1061<br /> |SCREW-RHMS-#8-32 X 1&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |24<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> | rowspan=&quot;3&quot; |''Track and Wireway mounting hardware (Not shown)''<br /> |14<br /> |-<br /> |25<br /> |HW0133<br /> |WASHER-FLAT-#8<br /> |<br /> |14<br /> |-<br /> |26<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |17<br /> |-<br /> |27<br /> |E0139<br /> |AUXILIARY CONTACT BLOCK<br /> |80332009<br /> |''†† See notes''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† &quot;A40&quot; Series Contactor and &quot;TA&quot; Series Overload no longer available as of mid-March 2022. Components must be replaced with current Overload &amp; Relay Kit 80332009.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Auxiliary contact Block required for units equipped with &quot;AF38&quot; Series Contactor &amp; &quot;TF&quot; Series Overload.''<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Transformer&lt;/big&gt;&lt;/u&gt;''' ===<br /> '''&lt;big&gt;''Transformer for Units with 20 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS Transformer for Units with 20HP.png|alt=BE-TS Transformer for Units with 20HP|frameless|554x554px]]<br /> <br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0220<br /> |TRANSFORMER<br /> |<br /> |''480VAC to 120VAC, 3kVA''<br /> |1<br /> |-<br /> |2<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |3<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |7<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |3<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;Operator Console&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Operator Console Electrical.png|alt=BE-TS Operator Console Electrical|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0327<br /> |KEYED ACTUATOR ASSEMBLY<br /> |<br /> |''Includes 2 Keys &amp; Contact Block'' <br /> |1<br /> |-<br /> |2<br /> |E0351<br /> |KEY-REPLACEMENT<br /> |<br /> |''Set of 2 Keys''<br /> |A/R<br /> |-<br /> |3<br /> |E0309-1<br /> |HOUR METER<br /> |<br /> |''† Includes mounting hardware''<br /> |1<br /> |-<br /> |4<br /> |N/A<br /> |SWITCH-SELECTOR-3 POSITION<br /> |<br /> |''ON-OFF-ON, †† See notes''<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |5<br /> |N/A<br /> |LEGEND PLATE-VACUUM<br /> |<br /> |''††† See notes''<br /> |1<br /> |-<br /> |N/A<br /> |LEGEND PLATE-MAGNET<br /> |<br /> |''††† See notes''<br /> |1<br /> |-<br /> |6<br /> |N/A<br /> |CONTACT BLOCK-N/O<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |7<br /> |N/A<br /> |CONTACT BLOCK-N/C<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |8<br /> |E1083<br /> |SWITCH-SELECTOR-3 POSITION<br /> |80232001<br /> |''OFF-ON-OFF''<br /> |1<br /> |-<br /> |9<br /> |E1080<br /> |CONTACT BLOCK-N/O &amp; N/C<br /> |80232001<br /> |<br /> |2<br /> |-<br /> |10<br /> |YE0311<br /> |SWITCH-EMERGENCY STOP<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |YE0407<br /> |LEGEND PLATE-EMERGENCY STOP<br /> |<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Current Hour Meter is 3-Bolt version. Replacement of 4-Bolt version will require new mounting holes to be drilled in dashboard.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Parts no longer available. Must order new Selector Switch Kit 80232001''<br /> |-<br /> | colspan=&quot;6&quot; |''††† Parts no longer available. See Labels &amp; Placards section for current Placards''<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;Foot Switch&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Foot Switch Electrical.png|alt=BE-TS Foot Switch Electrical|frameless|701x701px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0301-1<br /> |SWITCH-FOOT OPERATED<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .500&quot; to .625&quot;''<br /> |1<br /> |-<br /> |3<br /> |E0515<br /> |CORD-14-3-SO/SOW<br /> |<br /> |<br /> |9'<br /> |-<br /> |4<br /> |HC0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |''If equipped''<br /> |2<br /> |-<br /> |5<br /> |HC0103<br /> |WASHER-1/4&quot;-LOCK<br /> |<br /> |''If equipped''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Open-Style Switch is a direct replacement for discontinued, Covered-Style Switch.'' <br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''Gate Switch'''&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Gate Switch Electrical.png|alt=BE-TS Gate Switch Electrical|frameless|613x613px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0312<br /> |SWITCH-PUSH BUTTON<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43017041<br /> |MOUNT-GATE SWITCH<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW1077<br /> |SCREW-RHMS-#10-24 X 5/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0307<br /> |BOLT-SHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |PL0502<br /> |GROMMET-3/8&quot; I.D.<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |YE0305<br /> |SWITCH-ROLLER<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |SS0303<br /> |WASHER-FLAT-#8<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |SS0111<br /> |SCREW-SHCS-#8-32 X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |SS0203<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''Proximity Switch'''&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Proximity Switch Electrical.png|alt=BE-TS Proximity Switch Electrical|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0314<br /> |SENSOR-PROXIMITY-30MM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43017027-2<br /> |BRACKET-PROXIMITY SENSOR<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |6<br /> |43017037-2<br /> |ANGLE-PROXIMITY SENSOR TARGET<br /> |<br /> |''Rotary Actuator units'' <br /> |1<br /> |-<br /> |43017084-2<br /> |ANGLE-PROXIMITY SENSOR TARGET<br /> |<br /> |''Helical Actuator units'' <br /> |1<br /> |-<br /> |7<br /> |HW0341<br /> |BOLT-FHSCS-1/4-20 X 5/8&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''120V Receptacle'''&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Proximity Switch Electrical.png|alt=BE-TS Proximity Switch Electrical|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |3<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0650<br /> |RECEPTACLE-DUPLEX<br /> |<br /> |''† 20A''<br /> |1<br /> |-<br /> |5<br /> |E0651<br /> |COVER-RECEPTACLE-DUPLEX<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0655<br /> |RECEPTACLE-GFCI<br /> |<br /> |''20A''<br /> |1<br /> |-<br /> |7<br /> |E0656<br /> |COVER-RECEPTACLE-GFCI<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |E0654<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |E0657<br /> |COVER-RECEPTACLE-DUPLEX/GFCI<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |''Mounting hardware (Not shown)''<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† If Duplex Receptacle has Split Feed (1 set of black &amp; white wires for each plug), the Break-Off Fin must be removed prior to installation.'' <br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''Console Enclosure'''&lt;/big&gt;&lt;/u&gt; ===<br /> <br /> ==== '''&lt;big&gt;''[Discontinued] Operator Console Enclosure for Units with 10 HP Power Unit''&lt;/big&gt;''' ====<br /> [[File:BE-TS (Discontinued) Operator Console Enclosure for Units with 10 HP Power Unit.png|alt=BE-TS (Discontinued) Operator Console Enclosure for Units with 10 HP Power Unit|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-6&quot; X 6&quot; X 4 &quot;<br /> |<br /> |''Consult factory''<br /> |1<br /> |-<br /> |2<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |3<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |4<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |5<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |8<br /> |43817087-2<br /> |BRACKET-MOUNTING-ENCLOSURE<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> | rowspan=&quot;4&quot; |''Mounting bracket hardware (Not shown)''<br /> |2<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |2<br /> |}<br /> '''&lt;big&gt;''[Discontinued] Operator Console Enclosure Panel for Units with 10 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS (Discontinued) Operator Console Enclosure Panel for Units with 10 HP Power Unit.png|alt=BE-TS (Discontinued) Operator Console Enclosure Panel for Units with 10 HP Power Unit|frameless|566x566px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0639<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |''Without holes''<br /> |1<br /> |-<br /> |2<br /> |E1024<br /> |TRACK-TERMINAL BLOCK<br /> |<br /> |''4 7/8&quot; LG''<br /> |1<br /> |-<br /> |3<br /> |E1020<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |9<br /> |-<br /> |4<br /> |E1330<br /> |END ANCHOR<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |E1040<br /> |END BARRIER<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0341<br /> |GROUND LUG<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |''2 for track mounting''<br /> |3<br /> |-<br /> |8<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |''2 for track mounting''<br /> |3<br /> |-<br /> |9<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |''2 for track mounting''<br /> |3<br /> |}<br /> '''&lt;big&gt;''[Current] Operator Console Enclosure for Units with 20 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS (Current) Operator Console Enclosure for Units with 20 HP Power Unit.png|alt=BE-TS (Current) Operator Console Enclosure for Units with 20 HP Power Unit|frameless|549x549px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-8&quot; X 8&quot; X 4&quot;<br /> |<br /> |''Consult factory''<br /> |1<br /> |-<br /> |2<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |3<br /> |-<br /> |3<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .625&quot; to .750&quot;''<br /> |1<br /> |-<br /> |4<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''† Grip size .450&quot; to .560&quot;''<br /> |4<br /> |-<br /> |5<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''†'' ''Grip size .250&quot; to .375&quot;''<br /> |4<br /> |-<br /> |6<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |11<br /> |-<br /> |7<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |E1349<br /> |SEAL-KNOCKOUT-1/2&quot;<br /> |<br /> |''† See notes''<br /> |A/R<br /> |-<br /> |9<br /> |43037003-2<br /> |BRACKET-MOUNTING-ENCLOSURE<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> | rowspan=&quot;4&quot; |''Mounting bracket hardware (Not shown)''<br /> |2<br /> |-<br /> |12<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |2<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Restraints sold for machines equipped with all available options. Machines built without certain options will have Knockout Seals (Item #8) installed in place of restraints.''<br /> |}<br /> '''&lt;big&gt;''[Current] Operator Console Enclosure Panel for Units with 20 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS (Current) Operator Console Enclosure Panel for Units with 20 HP Power Unit.png|alt=BE-TS (Current) Operator Console Enclosure Panel for Units with 20 HP Power Unit|frameless|527x527px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0135<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |''Blank panel without holes''<br /> |1<br /> |-<br /> |2<br /> |E0908<br /> |MOUNTING RAIL<br /> |<br /> |''Sold by length''<br /> |A/R<br /> |-<br /> |3<br /> |YE0402<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |14<br /> |-<br /> |4<br /> |YE0405<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |YE0406<br /> |END ANCHOR<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |E1074<br /> |JUMPER-2 POLE<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |E0130<br /> |GROUND BAR-7 POSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW1061<br /> |SCREW-RHMS-#8-32 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> | rowspan=&quot;3&quot; |''Track and Wireway mounting hardware (Not shown)''<br /> |2<br /> |-<br /> |10<br /> |HW0133<br /> |WASHER-FLAT-#8<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |4<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''Junction Box'''&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Junction Box.png|alt=BE-TS Junction Box|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |2<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |3<br /> |-<br /> |3<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .500&quot; to .625&quot;''<br /> |4<br /> |-<br /> |4<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .625&quot; to .750&quot;''<br /> |2<br /> |-<br /> |5<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Top Module Junction Box&lt;/big&gt;''''' ====<br /> [[File:BE-TS Junction Box.png|alt=BE-TS Junction Box|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1329<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0662<br /> |RESTRAINT-3/4&quot;-LIQUID TIGHT<br /> |<br /> |''Includes Locknut'' <br /> |1<br /> |-<br /> |3<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .625&quot; to .750&quot;''<br /> |1<br /> |-<br /> |4<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Wiring Diagrams&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;BE-TS with 10 HP Motor Wiring Diagram&lt;/big&gt;''''' ====<br /> [[File:BE-TS Wiring Diagram-10HP Motor.png|alt=BE-TS Wiring Diagram-10HP Motor|frameless|800x800px]]<br /> <br /> ==== '''''&lt;big&gt;BE-TS with Magnet and 10 HP Motor Wiring Diagram&lt;/big&gt;''''' ====<br /> [[File:BE-TS with Magnet and 10HP Motor Wiring Diagram.png|alt=BE-TS with Magnet and 10HP Motor Wiring Diagram|frameless|800x800px]]<br /> <br /> ==== '''''&lt;big&gt;BE-TS with Magnet and 20 HP Motor Wiring Diagram&lt;/big&gt;''''' ====<br /> [[File:BE-TS Magnet Wiring Diagram-20HP Motor.png|alt=BE-TS Magnet Wiring Diagram-20HP Motor|frameless|800x800px]]<br /> <br /> [[File:BE-TS Magnet Wiring Diagram-20HP Motor-02.png|alt=BE-TS Magnet Wiring Diagram-20HP Motor-02|frameless|800x800px]]<br /> <br /> [[File:BE-TS Magnet Wiring Diagram-20HP Motor-03.png|alt=BE-TS Magnet Wiring Diagram-20HP Motor-03|frameless|800x800px]]<br /> <br /> [[File:BE-TS Magnet Wiring Diagram-20HP Motor-04.png|alt=BE-TS Magnet Wiring Diagram-20HP Motor-04|frameless|800x800px]]<br /> <br /> == &lt;big&gt;Hydraulics&lt;/big&gt; ==<br /> <br /> === '''&lt;big&gt;&lt;u&gt;[Discontinued] 10 HP Power Unit&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:(Discontinued) BE-TS Power Unit (10HP).png|alt=(Discontinued) BE-TS Power Unit (10HP)|frameless|553x553px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0011<br /> |MOTOR-ELECTRIC-10HP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0326<br /> |ADAPTER-PUMP TO MOTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0325<br /> |PUMP-VANE-16 GPM<br /> |<br /> |''Variable displacement''<br /> |1<br /> |-<br /> |4<br /> |HC0327<br /> |COUPLING BODY-1 3/8&quot;<br /> |<br /> |''Motor end''<br /> |1<br /> |-<br /> |5<br /> |HC0329<br /> |SPIDER-COUPLING INSERT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HC0328<br /> |COUPLING BODY-7/8&quot;<br /> |<br /> |''Pump end''<br /> |1<br /> |-<br /> |7<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1 1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H1549<br /> |ADAPTER-#20 JICM X #24 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |H1595<br /> |ADAPTER-90 DEG-#20 JICM X #20 JICSW<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |H1609<br /> |ADAPTER-90 DEG-#12 JICM X #16 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |H1522<br /> |ADAPTER-#12 JICSW X #12 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |HC0260<br /> |VALVE-MAIN SYSTEM RELIEF<br /> |<br /> |<br /> |1<br /> |-<br /> |15a<br /> |43846003<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''†† For Item 15 (Not shown)''<br /> |A/R<br /> |-<br /> |16<br /> |HC0318<br /> |GAUGE-PRESSURE<br /> |<br /> |<br /> |1<br /> |-<br /> |17<br /> |H0206<br /> |PLUG-#4 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |H1108<br /> |ADAPTER-#10 JICM X #12 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |H1522<br /> |ADAPTER-#12 JICSW X #12 SAEM<br /> |<br /> |''† See note''<br /> |1<br /> |-<br /> |20<br /> |H1542<br /> |ADAPTER-#12 JICM X #12 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |21<br /> |HC0280<br /> |VALVE-CHECK<br /> |<br /> |''† See note''<br /> |1<br /> |-<br /> |22<br /> |H1542<br /> |ADAPTER-#12 JICM X #12 SAEM<br /> |<br /> |''† See note''<br /> |1<br /> |-<br /> |23<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .500&quot; to .625&quot;''<br /> |1<br /> |-<br /> |23a<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |''For Item 23 (Not shown)''<br /> |1<br /> |-<br /> |24<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |25<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |26<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |27<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Parts noted used on units built after April 2001.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Cartridges are for replacement only.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;[Discontinued] 30 Gallon Reservoir&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:(Discontinued) BE-TS 30 Gallon Reservoir.png|alt=(Discontinued) BE-TS 30 Gallon Reservoir|frameless|542x542px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43842001<br /> |RESERVOIR-VERTICAL-30 GAL<br /> |<br /> |''Includes Items 1 through 8''<br /> |1<br /> |-<br /> |1<br /> |HC0542<br /> |GASKET-CHANNEL<br /> |<br /> |''Sold by length''<br /> |7'<br /> |-<br /> |2<br /> |HC0340<br /> |GAUGE-SIGHT<br /> |<br /> |''with Thermometer''<br /> |1<br /> |-<br /> |3<br /> |HC0306<br /> |STRAINER-SUCTION<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HC0308<br /> |FILLER/BREATHER ASSEMBLY<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0209<br /> |SCREW-RHMS-10-32 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |BI0110<br /> |ELBOW-STR-90 DEG-#16 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |8<br /> |H0208<br /> |PLUG-#12 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1590<br /> |ADAPTER-90 DEG-#16 JICM X #16 FNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |BI0102<br /> |ELBOW-#12 FNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |BI0020<br /> |NIPPLE-#12 NPT X 3&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |BI0301<br /> |TEE-#12 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |H1502<br /> |ADAPTER-#8 JICM X #12 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |BI0002<br /> |NIPPLE-CLOSE-#12 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HC0307<br /> |RETURN LINE FILTER ASSEMBLY<br /> |<br /> |''Housing and Filter''<br /> |1<br /> |-<br /> |16<br /> |HC0317<br /> |FILTER-RETURN LINE<br /> |<br /> |''Replacement filter''<br /> |1<br /> |-<br /> |17<br /> |H1509<br /> |ADAPTER-#10 JICM X #12 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> | rowspan=&quot;4&quot; |''Mounting hardware''<br /> <br /> ''(Not shown)''<br /> |4<br /> |-<br /> |19<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |8<br /> |-<br /> |20<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |4<br /> |-<br /> |21<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;[Current] Power Unit (20 HP)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:(Current) BE-TS 30 Power Unit (20 HP).png|alt=(Current) BE-TS 30 Power Unit (20 HP)|frameless|531x531px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0040<br /> |MOTOR-ELECTRIC-20 HP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0357<br /> |ADAPTER-PUMP TO MOTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0356<br /> |PUMP-PISTON-71CC<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HC0358-M<br /> |COUPLING BODY-M300-1 5/8&quot; BORE<br /> |<br /> |''MOTOR SIDE''<br /> |1<br /> |-<br /> |5<br /> |HC0358-I<br /> |SPIDER-COUPLING INSERT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HC0358-P<br /> |COUPLING BODY-M300-1 1/4&quot; BORE<br /> |<br /> |''PUMP SIDE''<br /> |1<br /> |-<br /> |7<br /> |HW0602<br /> |BOLT-HHCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0113<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |H1604<br /> |ADAPTER-90 DEG-#12 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HC0363<br /> |ADAPTER-FLANGE-#32 NPT<br /> |<br /> |''Includes O-ring''<br /> |1<br /> |-<br /> |11<br /> |HC0240<br /> |BLOCK-CHECK VALVE<br /> |<br /> |''Includes Cartridge &amp; O-ring''<br /> |1<br /> |-<br /> |12<br /> |N/A<br /> |CARTRIDGE-CHECK VALVE<br /> |<br /> |''† Replacement cartridge''<br /> |A/R<br /> |-<br /> |13<br /> |H0300<br /> |ELBOW-STR-90 DEG-#4 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |HC0318<br /> |GAUGE-PRESSURE<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |HE0704<br /> |ADAPTER-SPLIT FLANGE-1&quot;<br /> |<br /> |''2-Piece adapter with O-ring''<br /> |1<br /> |-<br /> |16<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |H0211<br /> |ADAPTER-#24 NPT X #12<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |E0661<br /> |RESTRAINT-3/4&quot;-90 DEG-LIQUID TIGHT<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |HW0513<br /> |BOLT-HHCS-1/2-13 X 2 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |20<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |21<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTE<br /> |-<br /> | colspan=&quot;6&quot; |''† Consult factory''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;[Current] 45 Gallon Reservoir&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:(Current) BE-TS 45 Gallon Reservoir.png|alt=(Current) BE-TS 45 Gallon Reservoir|frameless|547x547px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43842010<br /> |45 GAL RESERVOIR ASSEMBLY<br /> |<br /> |''Includes Items 1 through 7''<br /> |A/R<br /> |-<br /> |1<br /> |43848005<br /> |PLATE-COVER<br /> |<br /> |''† See note''<br /> |1<br /> |-<br /> |2<br /> |HC0308<br /> |FILLER/BREATHER ASSEMBLY<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0209<br /> |SCREW-RHMS-10-32 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |4<br /> |HC0340<br /> |GAUGE-SIGHT<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H0208<br /> |PLUG-#12 NPT<br /> |<br /> |''Non-IIoT equipped units only''<br /> |1<br /> |-<br /> |6<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |7<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |8<br /> |HC0361<br /> |HOUSING-FILTER<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HC0354<br /> |CARTRIDGE-FILTER<br /> |<br /> |''10 Micron filtration''<br /> |1<br /> |-<br /> |10<br /> |HC0362<br /> |FLANGE-SUCTION TUBE<br /> |<br /> |''Includes hardware''<br /> |1<br /> |-<br /> |11<br /> |43848008<br /> |TUBE-SUCTION<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |H1569<br /> |ADAPTER-45 DEG-#12 JICM X #12 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |H0202<br /> |REDUCER-#24 SAE X #12 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |H1622<br /> |ADAPTER-90 DEG-#12 SAEM X #12 JICM<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |H1644<br /> |PLUG-#24 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |H1610<br /> |ADAPTER-45 DEG-#12 JICSW X #12 JICM<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |PB0311-1<br /> |NIPPLE-#12 NPT X 2&quot;-BRASS<br /> |<br /> | rowspan=&quot;3&quot; |''†† See notes''<br /> |1<br /> |-<br /> |20<br /> |BI0301<br /> |TEE-#12 FNPT<br /> |<br /> |1<br /> |-<br /> |21<br /> |H1502<br /> |ADAPTER-#8 JICM X #12 MNPT<br /> |<br /> |2<br /> |-<br /> |22<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> | rowspan=&quot;5&quot; |''Reservoir mounting hardware'' <br /> <br /> ''(Not shown)''<br /> |2<br /> |-<br /> |23<br /> |HW0405<br /> |BOLT-HHCS-3/8-16 X 2&quot;<br /> |<br /> |2<br /> |-<br /> |24<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |8<br /> |-<br /> |25<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |4<br /> |-<br /> |26<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† RVT silicone required to seal cover plate after removal.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Components required for units equipped with radial piston drive wheel motors plumbed with case drain hoses. See Drive Wheel Assembly section.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Valve Assembly&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Lift Valve and Manifold Detail&lt;/big&gt;''''' ====<br /> [[File:BE-TS Lift Valve and Manifold.png|alt=BE-TS Lift Valve and Manifold|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |80342001<br /> |LEVER VALVE RETRO KIT<br /> |<br /> |''† Required prior to 2006'' <br /> |A/R<br /> |-<br /> |1<br /> |HC0257<br /> |VALVE-LEVER<br /> |<br /> |''Effective from 2006 to Present''<br /> |1<br /> |-<br /> |2<br /> |HC0252<br /> |MANIFOLD-D05-1 BANK<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0318<br /> |BOLT-SHCS-1/4-20 X 1 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |H1642<br /> |PLUG-#12 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H1542<br /> |ADAPTER-#12 JICM X #12 SAEM<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HC0248<br /> |FIXED FLOW REGULATOR<br /> |<br /> |''††14 GPM''<br /> |1<br /> |-<br /> |12<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |13<br /> |H1540<br /> |ADAPTER-#8 JICM X #8 SAEM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |14<br /> |43817085<br /> |PLATE-ADAPTER-VALVE<br /> |<br /> |''† Not shown''<br /> |1<br /> |-<br /> |15<br /> |SS0104<br /> |BOLT-SHCS-1/4-20 X 5/8&quot;-SST<br /> |<br /> |''† Not shown''<br /> |4<br /> |-<br /> |16<br /> |SS0300<br /> |WASHER-FLAT-1/4&quot;-SAE-SST<br /> |<br /> |''† Not shown''<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |<br /> |-<br /> | colspan=&quot;6&quot; |''† Kit includes Items 1 &amp; 14 through 16. Minor modifications to the dash board required.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† For units shipped April 2017 to present''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Floor Drive / Arm Rotation Valve and Manifold Detail&lt;/big&gt;''''' ====<br /> [[File:BE-TS Floor Drive-Arm Rotation Valve and Manifold.png|alt=BE-TS Floor Drive-Arm Rotation Valve and Manifold|frameless|570x570px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0233<br /> |VALVE-LEVER<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HC0251<br /> |MANIFOLD-D03-2 BANK<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1545<br /> |ADAPTER-#10 JICM X #10 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |H1600<br /> |ADAPTER-90 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |H1587<br /> |ADAPTER-#6 JICSW X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HC0211<br /> |VALVE-ADJUSTABLE FLOW CONTROL<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |H1504<br /> |ADAPTER-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |H1640<br /> |PLUG-#6 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |43817033-2<br /> |RISER PLATE<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |14<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |HC0233-SK<br /> |SEAL KIT<br /> |<br /> |''For Item 1 (Not shown)''<br /> |A/R<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Valve Assembly&lt;/big&gt;''''' ====<br /> [[File:BE-TS Valve Assembly.png|alt=BE-TS Valve Assembly|frameless|538x538px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0233<br /> |VALVE-LEVER<br /> |<br /> |<br /> |3<br /> |-<br /> |2<br /> |HC0250<br /> |MANIFOLD-D03-3 BANK<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1610<br /> |ADAPTER-90 DEG-#10 JICM X #10 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |H1641<br /> |PLUG-#10 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H1000<br /> |ADAPTER-#8 SAEM X #4 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |H0001<br /> |NIPPLE-#4 NPT<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HC0247<br /> |FIXED FLOW REGULATOR-2.25 GPM<br /> |<br /> |''† See notes''<br /> |4<br /> |-<br /> |8<br /> |H1504<br /> |ADAPTER-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |H1640<br /> |PLUG-#6 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |H1540<br /> |ADAPTER-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |43817034-2<br /> |RISER PLATE<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |14<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |15<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HC0233-SK<br /> |SEAL KIT<br /> |<br /> |''For Item 1 (Not shown)''<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Units built prior to January 2107 equipped with Adjustable Flow Controls. Fixed Flow Regulators are direct replacement for Adjustable Flow Controls.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Lift Cylinder&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Lift Cylinder.png|alt=BE-TS Lift Cylinder|frameless|582x582px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43822006<br /> |CLEVIS ASSEMBLY<br /> |<br /> |''Sold as assembly only''<br /> |4<br /> |-<br /> |2<br /> |HW0813<br /> |SCREW-SHSS-3/8-16 X 1/2&quot;<br /> |<br /> |''Nylon tipped''<br /> |8<br /> |-<br /> |3<br /> |HC0420<br /> |CYLINDER-LIFT<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |H1645<br /> |ADAPTER-90 DEG-#8 SAEM X #6 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |H0212<br /> |ADAPTER-#6 NPT X #8 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HC0425<br /> |VELOCITY FUSE<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Lift Circuit&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Lift Circuit.png|alt=BE-TS Lift Circuit|frameless|553x553px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43017014-2<br /> |SUPPORT-PILOT DOWN MANIFOLD<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43718008<br /> |STANDOFF<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0315<br /> |BOLT-HHCS-1/4-20 X 4 1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |10<br /> |-<br /> |7<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |5<br /> |-<br /> |8<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |5<br /> |}<br /> <br /> ==== '''''&lt;big&gt;[Discontinued] Lift Circuit Configuration&lt;/big&gt;''''' ====<br /> [[File:(Discontinued) BE-TS Lift Circuit Configuration.png|alt=(Discontinued) BE-TS Lift Circuit Configuration|frameless|507x507px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |H1507<br /> |ADAPTER-#8 JICM X #8 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0264<br /> |VALVE-CHECK-PILOT TO OPEN<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H1621<br /> |ADAPTER-#4 SAEM X #2 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HC0269<br /> |VALVE-ADJUSTABLE FLOW CONTROL<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |H1591<br /> |ADAPTER-90 DEG-#6 JICM X #2 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |H1587<br /> |ADAPTER-#6 JICSW X #4 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1501<br /> |ADAPTER-#8 JICM X #6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43047002<br /> |MANIFOLD-PILOT DOWN<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> ==== '''''&lt;big&gt;[Current] Lift Circuit Configuration&lt;/big&gt;''''' ====<br /> [[File:(Current) BE-TS Lift Circuit Configuration.png|alt=(Current) BE-TS Lift Circuit Configuration|frameless|534x534px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0215<br /> |VALVE-CHECK-CARTRIDGE<br /> |<br /> |<br /> |8<br /> |-<br /> |2<br /> |H1560<br /> |ADAPTER-45 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |H1670<br /> |ADAPTER-45 DEG-#12 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |H1612<br /> |ADAPTER-90 DEG-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HC0283<br /> |VALVE-COUNTER BALANCE<br /> |<br /> |''Includes cartridge''<br /> |1<br /> |-<br /> |6<br /> |43846004<br /> |CARTRIDGE-COUNTER BALANCE<br /> |<br /> |''Replacement cartridge''<br /> |A/R<br /> |-<br /> |7<br /> |H1552<br /> |ADAPTER-#6 JICM X #6 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |H1587<br /> |ADAPTER-#6 JICSW X #4 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1501<br /> |ADAPTER-#8 JICM X #6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43047002<br /> |MANIFOLD-PILOT DOWN<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Cartridges are for replacement only''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Down-Speed Flow Control&lt;/big&gt;''''' ====<br /> [[File:BE-TS Down-Speed Flow Control.png|alt=BE-TS Down-Speed Flow Control|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0270<br /> |VALVE-ADJUSTABLE FLOW CONTROL<br /> |<br /> |''Pressure compensated''<br /> |1<br /> |-<br /> |2<br /> |H0007<br /> |NIPPLE-#8 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1647<br /> |ADAPTER-90 DEG-#10 SAEM X #8 FNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |H1680<br /> |ADAPTER-#10 JICM X #8 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H1690<br /> |ADAPTER-#10 JICSW X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HC0248<br /> |FIXED FLOW REGULATOR<br /> |<br /> |''14 GPM''<br /> |1<br /> |-<br /> |7<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |H1612<br /> |ADAPTER-90 DEG-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1547<br /> |ADAPTER-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Cross Port Relief&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Mounting Configuration&lt;/big&gt;''''' ====<br /> [[File:BE-TS Cross Port Relief Mounting Configuration.png|alt=BE-TS Cross Port Relief Mounting Configuration|frameless|546x546px]]<br /> {| class=&quot;wikitable&quot;<br /> ! colspan=&quot;6&quot; |UNITS BUILT PRIOR TO SEPTEMBER, 2014<br /> |-<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> ! colspan=&quot;6&quot; |UNITS BUILT SEPTEMBER, 2014 TO DECEMBER, 2014<br /> |-<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW0305<br /> |BOLT-HHCS-1/4-20 X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |7<br /> |43058004<br /> |PLATE-SPACER<br /> |<br /> |<br /> |1<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> ! colspan=&quot;6&quot; |UNITS BUILT DECEMBER, 2014 TO PRESENT<br /> |-<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |2<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |}<br /> ''NOTE: Effectivity dates refer to dates new extractor units shipped from the factory. Replacement part effectivity may differ due to factory inventory levels at time of parts order. Consult factory if unsure of parts needed.''<br /> <br /> ==== '''''&lt;big&gt;Components&lt;/big&gt;''''' ====<br /> [[File:BE-TS Cross Port Relief Components.png|alt=BE-TS Cross Port Relief Components|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0262<br /> |VALVE-CROSS PORT RELIEF<br /> |<br /> |''Includes cartridges''<br /> |1<br /> |-<br /> |2<br /> |43046002<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''For Item 1''<br /> |A/R<br /> |-<br /> |3<br /> |H1540<br /> |ADAPTER-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |H1507<br /> |ADAPTER-#8 JICM X #8 MNPT<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |HC0239<br /> |VALVE-ADJUSTABLE FLOW CONTROL<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |H1568<br /> |ADAPTER-45 DEG-#8 JICM X #8 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |H1646<br /> |ADAPTER-90 DEG-#8 SAEM X #6 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |H0805<br /> |TEE-#6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HC0273<br /> |REGULATOR-FIXED FLOW<br /> |<br /> |''7.0 GPM''<br /> |4<br /> |-<br /> |11<br /> |H1501<br /> |ADAPTER-#8 JICM X #6 MNPT<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Floor Drive Cutout&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Floor Drive Cutout.png|alt=BE-TS Floor Drive Cutout|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |SOLENOID-DRIVE CUTOUT<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |7<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |BI0001<br /> |NIPPLE-CLOSE-#8 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |N/A<br /> |SOLENOID-DRIVE CUTOUT<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |10<br /> |YE0501<br /> |CONNECTOR-SOLENOID<br /> |<br /> |''DIN 43650''<br /> |1<br /> |-<br /> |11<br /> |43058004<br /> |PLATE-SPACER<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |HC0278-TS/QS<br /> |SOLENOID-DRIVE CUTOUT<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |H1547<br /> |ADAPTER-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |H1612<br /> |ADAPTER-90 DEG-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Part obsolete. Must be replaced with Retro Kit Part # 80242007.''<br /> |-<br /> | colspan=&quot;6&quot; |''NOTE: Effectivity dates refer to dates new extractor units shipped from the factory. Replacement part effectivity may differ due to factory inventory levels at time of parts order. Consult factory if unsure of parts needed.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Counter Balance Valve&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Counter Balance Valve.png|alt=BE-TS Counter Balance Valve|frameless|554x554px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0263<br /> |VALVE-COUNTER BALANCE<br /> |<br /> |<br /> |1<br /> |-<br /> |1a<br /> |43046004<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''† For Item 1 (Not shown)''<br /> |A/R<br /> |-<br /> |2<br /> |H1615<br /> |ADAPTER-90 DEG-#6 JICM X #6 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |H1552<br /> |ADAPTER-#6 JICM X #6 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0305<br /> |BOLT-HHCS-1/4-20 X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Cartridges are for replacement only''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Transition Plate&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Transition Plate.png|alt=BE-TS Transition Plate|frameless|576x576px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817067-2<br /> |PLATE-TRANSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |H0020<br /> |UNION-BULKHEAD-45 DEG-#6 JICM<br /> |<br /> |<br /> |8<br /> |-<br /> |3<br /> |H0021<br /> |NUT-BULKHEAD-#6 JIC<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Return Line Manifold&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Return Line Manifold.png|alt=BE-TS Return Line Manifold|frameless|555x555px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43847001<br /> |MANIFOLD-RETURN LINE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |H1501<br /> |ADAPTER-#8 JICM X #6 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1503<br /> |ADAPTER-#12 JICM X #12 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |43817069-2<br /> |BRACKET-BULKHEAD<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |H0015<br /> |UNION-BULKHEAD-90 DEG-#12 JICM<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H0016<br /> |NUT-BULKHEAD-#12 JIC<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;EQ Chain Hose Guard&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS EQ Chain Hose Guard.png|alt=BE-TS EQ Chain Hose Guard|frameless|577x577px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43017074-2<br /> |GUARD-HOSE-EQ CHAIN<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Used on units manufactured after May 2015.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Hydraulic Schematics&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Hydraulic Schematic.png|alt=BE-TS Hydraulic Schematic|frameless|1180x1180px]]<br /> <br /> ==== '''''&lt;big&gt;Extended Reach Hydraulic Schematics&lt;/big&gt;''''' ====<br /> [[File:BE-TS Hydraulic Schematic Extended Reach.png|alt=BE-TS Hydraulic Schematic Extended Reach|frameless|905x905px]]<br /> <br /> == &lt;big&gt;Standard Available Options&lt;/big&gt; ==<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Strobe &amp; Alarm&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''&lt;big&gt;''[Discontinued] Strobe Light &amp; Stanchion Configuration''&lt;/big&gt;''' ====<br /> [[File:(Discontinued) BE-TS Strobe Light.png|alt=(Discontinued) BE-TS Strobe Light|frameless|722x722px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0317<br /> |STROBE LIGHT<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41215014<br /> |STANCHION<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0401<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |E1010<br /> |RECEPTACLE-TWIST LOCK<br /> |<br /> |''(Not shown)''<br /> |1<br /> |-<br /> |7<br /> |E1011<br /> |PLUG-TWIST LOCK<br /> |<br /> |''(Not shown)''<br /> |1<br /> |}<br /> <br /> ==== '''&lt;big&gt;''[Discontinued] Audible Alarm Configuration''&lt;/big&gt;''' ====<br /> [[File:(Discontinued) BE-TS Audible Alarm.png|alt=(Discontinued) BE-TS Audible Alarm|frameless|490x490px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0317-A<br /> |AUDIBLE ALARM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0654<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |00117101-2<br /> |MOUNTING BRACKET<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |5<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> ==== '''&lt;big&gt;''[Current] Stack Light Strobe &amp; Alarm Configuration''&lt;/big&gt;''' ====<br /> [[File:(Current) BE-TS Stack Light Strobe and Alarm Configuration.png|alt=(Current) BE-TS Stack Light Strobe and Alarm Configuration|frameless|844x844px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0362<br /> |MOUNTING BASE<br /> |<br /> |''Includes restraints''<br /> |1<br /> |-<br /> |2<br /> |E0365<br /> |TERMINAL BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0363<br /> |STROBE LIGHT-AMBER-120VAC<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |4<br /> |E0364<br /> |AUDIBLE ALARM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |5<br /> |SS0118<br /> |SCREW-SHCS-#8-32 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |SS0303<br /> |WASHER-FLAT-#8<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |SS0203<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |E1010<br /> |RECEPTACLE-TWIST LOCK<br /> |<br /> |''(Not shown)''<br /> |1<br /> |-<br /> |9<br /> |E1011<br /> |PLUG-TWIST LOCK<br /> |<br /> |''(Not shown)''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† For units not equipped with the audible alarm option, a cap (not shown) mounts on top of the strobe light in place of the audible alarm. Cap included with base.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† For units not equipped with the strobe light option, the audible alarm mounts directly to the terminal base in place of the strobe light.'' <br /> |}<br /> <br /> ==== '''&lt;big&gt;''Strobe &amp; Alarm Mounting''&lt;/big&gt;''' ====<br /> [[File:BE-TS Strobe and Alarm Mounting.png|alt=BE-TS Strobe and Alarm Mounting|frameless|516x516px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41235060<br /> |STACK LIGHT STANCHION<br /> |<br /> |''Discontinued''<br /> |A/R<br /> |-<br /> |2<br /> |HW0401<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |3<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |4<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |REF<br /> |43032006<br /> |STANCHION ASSEMBLY<br /> |<br /> |''Includes items 5 through 8''<br /> |A/R<br /> |-<br /> |5<br /> |43035003<br /> |STACK LIGHT STANCHION<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43037007-2<br /> |CLAMP BRACKET<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0305<br /> |BOLT-HHCS-1/4-20 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0050<br /> |NUT-FLANGED-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |43037004-2<br /> |MOUNTING BRACKET<br /> |<br /> |''Overhead Guard only''<br /> |1<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Horn&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Horn.png|alt=BE-TS Horn|frameless|565x565px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |YE0308<br /> |BUTTON-HORN<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0317-A<br /> |AUDIBLE ALARM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0654<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |00117101-2<br /> |MOUNTING BRACKET<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |11<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Overhead Guard&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Overhead Guard.png|alt=BE-TS Overhead Guard|frameless|530x530px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817119-2<br /> |GUARD-SIDE<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |2<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0406<br /> |BOLT-HHCS-3/8-16 X 2-1/2&quot;<br /> |<br /> |<br /> |5<br /> |-<br /> |5<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |6<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |<br /> |<br /> |5<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Side Guards used on units built November 2013 to Present. Mounting hardware valid for all units with Removable Overhead Guard.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Operator Sheild&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''&lt;big&gt;''[Current] Operator Shield''&lt;/big&gt;''' ====<br /> [[File:(Current) BE-TS 30 Operator Sheild.png|alt=(Current) BE-TS 30 Operator Sheild|frameless|566x566px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43814025<br /> |OPERATOR SHIELD<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |HC0542<br /> |GASKET EDGING<br /> |<br /> |''(2) @ 38&quot; LG, (1) @ 60&quot; LG''<br /> |136&quot;<br /> |-<br /> |3<br /> |43817116-2<br /> |BRACKET-TOP<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |1412FSW<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |43817117-2<br /> |BRACKET-CENTER SUPPORT-OUTSIDE<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43817118-2<br /> |BRACKET-CENTER SUPPORT-INSIDE<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |SS0114<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |8<br /> |SS0502<br /> |LANYARD-8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |SS0501<br /> |PIN-QUICK RELEASE-3/16&quot; X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Consult factory for units built prior to November 2013 with plexiglass bolted directly to Overhead Guard structure on front and sides.'' <br /> |}<br /> <br /> ==== '''&lt;big&gt;''Operator Shield (Used Prior to November 2013)''&lt;/big&gt;''' ====<br /> [[File:BE-TS Operator Shield (Used Prior to November 2013).png|alt=BE-TS Operator Shield (Used Prior to November 2013)|frameless|559x559px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43717116<br /> |SHIELD-OPERATOR<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |43015010<br /> |FRAME-OPERATOR SHIELD WELDMENT<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43017066-2<br /> |SUPPORT-SIDE<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |43017065-2<br /> |SUPPORT-LOWER<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43017067-2<br /> |SUPPORT-UPPER<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |7<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |32<br /> |-<br /> |8<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |9<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |16<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Consult factory for units with plexiglass bolted directly to frame.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Powered Roller Cutout&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Powered Roller Cutout Photo Eye &amp; Reflector Locations (Prior to May 2022)&lt;/big&gt;''''' ====<br /> [[File:BE-TS Powered Roller Cutout Photo Eye &amp; Reflector Locations.png|alt=BE-TS Powered Roller Cutout Photo Eye &amp; Reflector Locations|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1321A<br /> |PHOTO EYE<br /> |<br /> |''† Polarized''<br /> |1<br /> |-<br /> |2<br /> |41217170-2<br /> |MOUNT-PHOTO EYE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0216<br /> |SCREW-#10-24 X 2&quot;<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |4<br /> |HW0032<br /> |NUT-NILN-#10-24<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |E1321-R<br /> |REFLECTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |41217171<br /> |MOUNT-REFLECTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |SS0803<br /> |SCREW-RHMS-#6-32 X 5/8&quot;<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |8<br /> |SS0125<br /> |BOLT-HHCS-1/4-20 X 5/8&quot;<br /> |<br /> |''††† See notes''<br /> |4<br /> |-<br /> |9<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''Quantities provided are for Single-Sided (PRC-1) Power Roller Cutout option. For units with Double Sided (PRC-2) option, quantities are double.''<br /> |-<br /> | colspan=&quot;6&quot; |''† Polarized Photo Eye recommended to prevent potential operational issues with very smooth or shiny battery cases.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Photo Eye &amp; Reflector mounting screws are trimmed to length.''<br /> |-<br /> | colspan=&quot;6&quot; |''††† Photo Eye &amp; Reflector Bracket Mounting Screws may be required to ground flush to prevent intereferance with guards.''<br /> |}<br /> '''''&lt;big&gt;Powered Roller Cutout Photo Eye &amp; Reflector Locations (May 2022 to Present)&lt;/big&gt;'''''<br /> <br /> [[File:BE-TS Powered Roller Cutout Photo Eye &amp; Reflector Locations (May 2022 to Present).png|alt=BE-TS Powered Roller Cutout Photo Eye &amp; Reflector Locations (May 2022 to Present)|frameless|555x555px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1321A<br /> |PHOTO EYE<br /> |<br /> |''† Polarized''<br /> |1<br /> |-<br /> |2<br /> |13537001-2<br /> |MOUNT-PHOTO EYE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E1321-R<br /> |REFLECTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |41217171<br /> |MOUNT-REFLECTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |SS0803<br /> |SCREW-RHMS-#6-32 X 5/8&quot;<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |PL0506<br /> |GROMMET-SEALING-2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''Quantities provided are for Single-Sided (PRC-1) Power Roller Cutout option. For units with Double Sided (PRC-2) option, quantities are double.''<br /> |-<br /> | colspan=&quot;6&quot; |''† Polarized Photo Eye recommended to prevent potential operational issues with very smooth or shiny battery cases.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Reflector mounting screws are trimmed to length.''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Powered Roller Cutout Mounting&lt;/big&gt;''''' ====<br /> [[File:BE-TS Powered Roller Cutout Mounting.png|alt=BE-TS Powered Roller Cutout Mounting|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0281<br /> |SOLENOID VALVE<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |BI0001<br /> |NIPPLE-CLOSE-#8 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |6<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |7<br /> |H1600<br /> |ADAPTER-90 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |H1546<br /> |ADAPTER-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Powered Roller Cutout Override Button&lt;/big&gt;''''' ====<br /> [[File:BE-TS Powered Roller Cutout Override Button.png|alt=BE-TS Powered Roller Cutout Override Button|frameless|568x568px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ACTUATOR-PUSH BUTTON (DISCONTINUED)<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |N/A<br /> |CONTACT BLOCK-N/C (DISCONTINUED)<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |3<br /> |E0384<br /> |ACTUATOR-PUSH BUTTON<br /> |80932002<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0386<br /> |CONTACT BLOCK-N/C<br /> |80932002<br /> |<br /> |1<br /> |-<br /> |5<br /> |E0387<br /> |DUMMY BLOCK<br /> |80932002<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0388<br /> |PUSH BUTTON-GREEN<br /> |80932002<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''Button location on dash may vary from position shown.''<br /> |-<br /> | colspan=&quot;6&quot; |''† Parts no longer available. Must order new Push-Button Switch Kit 80932002''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Powered Roller Cutout Junction Box&lt;/big&gt;''''' ====<br /> [[File:BE-TS Powered Roller Cutout Junction Box.png|alt=BE-TS Powered Roller Cutout Junction Box|frameless|535x535px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |3<br /> |-<br /> |4<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |4<br /> |-<br /> |5<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |7<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |''Mounting bolts (Not shown)''<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Level Assist&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Level Assist.png|alt=BE-TS Level Assist|frameless|568x568px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1321A<br /> |PHOTO EYE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |13537001-2<br /> |MOUNT-PHOTO EYE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |PL0502<br /> |GROMMET<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43837007<br /> |TARGET ANGLE<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |E0376<br /> |INDICATOR LIGHT<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |7<br /> |HW0152<br /> |WASHER-5/8&quot; I.D.<br /> |<br /> |''†† See notes (Not shown)''<br /> |2<br /> |-<br /> |8<br /> |E1321-RT<br /> |REFLECTIVE TAPE<br /> |<br /> |''(Not shown)''<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''Location of Indicator Light on the dash may vary from location shown''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Extractors built prior to October 2021 used Multi-Piece Indicator Lights with Replaceable Bulb and Lens are no longer available. Current Indicator Light is a 1-Piece LED Assembly. Replacement of any Multi-Piece Component requires replacing entire assembly with current, 1-Piece Indicator Light.''<br /> |-<br /> | colspan=&quot;6&quot; |''††† Washers required for units that did not ship with Level Assist option from the factory.''<br /> |}<br /> '''&lt;big&gt;''Level Assist Junction Box''&lt;/big&gt;'''<br /> <br /> [[File:BE-TS Level Assist Junction Box.png|alt=BE-TS Level Assist Junction Box|frameless|524x524px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |4<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |5<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |''Mounting bolts (Not shown)''<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Blue Light&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Blue Light.png|alt=BE-TS Blue Light|frameless|611x611px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |EW2002B<br /> |BLUE PROJECTION SPOTLIGHT<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW0401<br /> |BOLT-HHCS-3/8-16 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0107<br /> |WASHER-LOCK-3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |4<br /> |-<br /> |5<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43835001<br /> |STANCHION-POWER<br /> |<br /> |<br /> |2<br /> |}<br /> [[File:BE-TS Blue Light Enclosure.png|alt=BE-TS Blue Light Enclosure|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-8&quot; X 8&quot; X 4&quot;<br /> |<br /> |''Consult factory''<br /> |1<br /> |-<br /> |2<br /> |E0135<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |''Blank panel without holes''<br /> |1<br /> |-<br /> |3<br /> |PS5R-SC12<br /> |POWER SUPPLY<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0908<br /> |MOUNTING RAIL<br /> |<br /> |''Sold by length''<br /> |A/R<br /> |-<br /> |5<br /> |YE0402<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |YE0405<br /> |END BARRIER<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |YE0406<br /> |END ANCHOR<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |E0341<br /> |GROUND LUG<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |3<br /> |-<br /> |10<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |11<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |''2 per Mounting Rail''<br /> |5<br /> |-<br /> |12<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |''2 per Mounting Rail''<br /> |5<br /> |-<br /> |13<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |''2 per Mounting Rail''<br /> |5<br /> |-<br /> |14<br /> |00196404<br /> |LABEL-DANGER<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Water Cart&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Water Cart.png|alt=BE-TS Water Cart|frameless|549x549px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PB0033<br /> |OVERFILL INDICATOR<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |PB0034<br /> |LOCKNUT-CONDUIT-2&quot;-NYLON<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0308<br /> |FILLER/BREATHER ASSEMBLY<br /> |<br /> |Includes gaskets<br /> |1<br /> |-<br /> |4<br /> |HW0209<br /> |SCREW-RHMS-10-32 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |5<br /> |550-057<br /> |HOSE-FILL-3/4&quot; X 15'<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |550-027<br /> |ON/OFF VALVE<br /> |<br /> |''(Not shown)''<br /> |1<br /> |-<br /> |7<br /> |PB0902<br /> |HOSE-3/4&quot;<br /> |<br /> |<br /> |30&quot;<br /> |-<br /> |8<br /> |HW1018<br /> |HOSE CLAMP-3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |PB0603<br /> |ADAPTER-3/4&quot; NPT X 3/4&quot; BARB<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |PB0456<br /> |ELBOW-STR-90 DEG-3/4&quot; NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |PB0451<br /> |ADAPTER-3/4&quot; NPT X 3/4 GHT<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |PB0302<br /> |PLUG-3/4&quot; NPT<br /> |<br /> |<br /> |<br /> |-<br /> |13<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |14<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |SS0106<br /> |SHCS-#10-24 X 1/2&quot;-SST<br /> |<br /> |<br /> |6<br /> |-<br /> |16<br /> |SS0114<br /> |BHSCS-#10-24 X 1/2&quot; SST<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |SS0301<br /> |WASHER-FLAT-#10-SAE-SST<br /> |<br /> |<br /> |10<br /> |-<br /> |18<br /> |00196701<br /> |DECAL-BHS-12&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |00196404<br /> |LABEL-DANGER-&quot;120 VOLTS&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |20<br /> |00166648<br /> |LABEL, NON-POTABLE<br /> |<br /> |<br /> |1<br /> |-<br /> |21<br /> |HW0418<br /> |BOLT-HHCS-3/8-16 X 2-1/4&quot;<br /> |<br /> | rowspan=&quot;3&quot; |''Mounting bolts'' <br /> <br /> ''(Not shown)''<br /> |2<br /> |-<br /> |22<br /> |HW0031<br /> |NUT-HEX-3/8-16 CENTERLOCK<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |2<br /> |}<br /> [[File:BE-TS Water Cart 2.png|alt=BE-TS Water Cart|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1511<br /> |SWITCH-ROCKER<br /> |<br /> |Submersible rated<br /> |1<br /> |-<br /> |2<br /> |E0378<br /> |INDICATOR LIGHT-120VAC-GREEN<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |3<br /> |E0376<br /> |INDICATOR LIGHT-120VAC-AMBER<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |4<br /> |E0377<br /> |INDICATOR LIGHT-120VAC-RED<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |5<br /> |46917015<br /> |PLACARD-INDICATOR LIGHT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0505<br /> |16-3 SO CORD<br /> |<br /> |<br /> |72&quot;<br /> |-<br /> |7<br /> |E0653<br /> |PLUG-120V/15A<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |9<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |PL0501<br /> |GROMMET-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |E1313<br /> |SOCKET-RELAY-8 PIN<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |E0331<br /> |RELAY-DPDT-110VAC<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |E0440<br /> |TERMINAL BLOCK-8 POLE<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |E1070<br /> |GROUND BAR-4 POSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |HW0139<br /> |SCREW-RHMS-#8-32 X 1 1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |HW0135<br /> |SCREW-RHMS-#8-32 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW1061<br /> |SCREW-RHMS-#8-32 X 1&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |5<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Water carts built prior to October 2021 used Multi-Piece Indicator Lights with Replaceable Bulb and Lens and are no longer available. Current Indicator Lights are a 1-Piece LED Assemblly.'' <br /> <br /> ''Replacement of any Mutli-Piece component requires replacing entire assembly with current 1-Piece Indicator Light.'' <br /> |}</div>

Kperrier https://tech.bhs1.com/index.php?title=File:BE-TS_Water_Cart_2.png&diff=7657 2024-03-13T20:27:44Z

<p>Kperrier: </p> <hr /> <div>BE-TS Water Cart 2</div>

Kperrier https://tech.bhs1.com/index.php?title=File:BE-TS_Water_Cart.png&diff=7656 2024-03-13T20:24:16Z

<p>Kperrier: </p> <hr /> <div>BE-TS Water Cart</div>

Kperrier https://tech.bhs1.com/index.php?title=File:BE-TS_Blue_Light_Enclosure.png&diff=7655 2024-03-13T20:18:52Z

<p>Kperrier: </p> <hr /> <div>BE-TS Blue Light Enclosure</div>

Kperrier https://tech.bhs1.com/index.php?title=File:BE-TS_Blue_Light.png&diff=7654 2024-03-13T20:17:51Z

<p>Kperrier: </p> <hr /> <div>BE-TS Blue Light</div>

Kperrier https://tech.bhs1.com/index.php?title=File:BE-TS_Level_Assist_Junction_Box.png&diff=7653 2024-03-13T20:14:39Z

<p>Kperrier: </p> <hr /> <div>BE-TS Level Assist Junction Box</div>

Kperrier https://tech.bhs1.com/index.php?title=File:BE-TS_Level_Assist.png&diff=7652 2024-03-13T20:13:13Z

<p>Kperrier: </p> <hr /> <div>BE-TS Level Assist</div>

Kperrier https://tech.bhs1.com/index.php?title=(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)&diff=7651 2024-03-13T20:09:39Z

<p>Kperrier: /* EQ Chain Hose Guard */</p> <hr /> <div>'''Looking for a specific replacement part?''' Ctrl-F (or Command-F for Mac users) brings up your browsers search panel and can search any text on the entire web page. Find parts by searching a part # or part description.<br /> <br /> '''Register your equipment with [https://na.bhs1.com/media-library/bhs-optima/ BHS Optima], BHS's free app.'''<br /> <br /> '''California Residents''': WARNING: This product contains chemicals known to the State of California to cause cancer and/or reproductive harm, and birth defects or other reproductive harm. [https://na.bhs1.com/about-bhs/compliance-statement-for-california-proposition-65/ Learn more here.]<br /> =&lt;big&gt;Preface&lt;/big&gt;=<br /> =&lt;big&gt;TP-606 – Safety &amp; De-Energization Procedures&lt;/big&gt;=<br /> ==&lt;big&gt;General Safety&lt;/big&gt;==<br /> {|<br /> |[[File:Read Before Operating Notice.png|alt=Read Before Operating|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:Read_Before_Operating_Notice.png]]<br /> |<br /> *Read and understand all instructions and warnings before using or servicing this equipment.<br /> *Keep these instructions for future reference.<br /> |}<br /> *Battery Extractor (BE) units shall only be operated by suitable persons of at least 18 years of age, who have been trained in the proper and safe operation of the BE and expressly certified/charged, in writing, by the user or their representative.<br /> *Only one person is permitted to travel on the BE at any time.<br /> *BE units shall only be used indoors in an industrial setting on a hard, nonslip, and level floor without defects including but not limited to holes, gouges, cracks, drains or obstacles comprised of concrete or other suitable industrial material meeting the minimum requirements specified by BHS as well as any local requirements.<br /> *A licensed structural engineer should be consulted prior to installing a BE on any building level other than the ground floor.<br /> *BE units are not designed to be shipped or transported after initial delivery.<br /> *Failure to follow these instructions and warnings may result in property damage, personal injury or death.<br /> ===&lt;big&gt;&lt;u&gt;Work Area&lt;/u&gt;&lt;/big&gt;===<br /> *Keep work area clean and well lit. Cluttered work areas and poor lighting can lead to accidents.<br /> *Clean up/contain any fluid spills immediately to prevent slips or falls.<br /> *Be aware of potential hazards when performing any service or maintenance to the unit.<br /> ===&lt;big&gt;&lt;u&gt;Service &amp; Maintenance&lt;/u&gt;&lt;/big&gt;===<br /> Service personnel shall wear Personal Protective Equipment (PPE) appropriate for the task being performed.<br /> {|<br /> |[[File:Electrical Hazard Warning.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Electrical_Hazard_Warning.png]]<br /> [[File:Danger Warning.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Danger_Warning.png|alt=DANGER]]<br /> |<br /> ===&lt;big&gt;&lt;u&gt;Lockout/Tagout&lt;/u&gt;&lt;/big&gt;===<br /> '''Lockout/tagout the BE per your corporate policy, if damaged or not functioning properly. Lockout/tagout and de-energize all systems prior to performing any maintenance or service to unit.'''<br /> |}<br /> {|<br /> |[[File:Warning-Battery-Explosion.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Warning-Battery-Explosion.png]]<br /> [[File:Danger Warning.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Danger_Warning.png|alt=DANGER]]<br /> |<br /> ===&lt;big&gt;&lt;u&gt;Lead-Acid Battery Explosion Hazard&lt;/u&gt;&lt;/big&gt;===<br /> '''DO NOT allow open flames or sparks of any kind near a battery. Highly explosive gas is generated when charging a battery that can remain in battery cells for extended periods of time after charging is complete.'''<br /> *Always wear appropriate PPE including rubber apron, gloves, boots and full face shield when performing service or maintenance to any lead-acid batteries.<br /> *DO NOT place metal or other conductive objects on top of battery. Arcing may occur causing damage to the battery and/or serious personal injury or death.<br /> *Use only chargers matching the voltage and amperage of the battery being charged. Overcharging a battery can cause damage to the battery, charger and/or serious personal injury or death.<br /> *Turn off charger before disconnecting battery from charger. Arcing between battery and charger connectors can cause damage to the connectors and/or serious personal injury or death.<br /> |}<br /> {|<br /> |[[File:Warning-Hydrualic-Hazard.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Warning-Hydrualic-Hazard.png]]<br /> [[File:Warning.png|alt=WARNING|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Warning.png]]<br /> |<br /> ===&lt;big&gt;&lt;u&gt;Hydraulic Hazards&lt;/u&gt;&lt;/big&gt;===<br /> '''AVOID HIGH PRESSURE FLUIDS-Escaping fluid under pressure can penetrate the skin causing serious injury. Relieve pressure before disconnecting hydraulic lines. Tighten all connections before applying pressure. Keep hands and body away from pin holes which eject fluids under high pressure. Use a piece of cardboard or paper to search for leaks. DO NOT use your hand.'''<br /> <br /> '''Any fluid injected into the skin under high pressure should be considered a serious medical emergency despite an initial normal appearance of the skin. There will be a delayed onset of pain, and serious tissue damage may occur. Medical attention should be sought immediately.'''<br /> |}<br /> {|<br /> ![[File:No Pacemakers Notice.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:No_Pacemakers_Notice.png]][[File:Strong Magnet Field Hazard Warning.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Strong_Magnet_Field_Hazard_Warning.png]]<br /> [[File:Warning.png|alt=WARNING|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Warning.png]]<br /> |<br /> ===&lt;big&gt;&lt;u&gt;Electromagnet Hazard&lt;/u&gt;&lt;/big&gt;===<br /> '''Units equipped with magnetic extraction generate strong magnetic fields. Persons with pacemakers &lt;u&gt;SHOULD&lt;/u&gt;''' &lt;u&gt;'''NOT'''&lt;/u&gt; '''operate or be in close proximity to equipment during operation.'''<br /> <br /> '''Failure to comply with this direction''' '''could result in serious personal injury or death.'''<br /> |}<br /> ===&lt;big&gt;&lt;u&gt;Operational Safety&lt;/u&gt;&lt;/big&gt;===<br /> *Only personnel trained in the proper and safe operation of BE units may operate or service the BE.<br /> *Operators shall wear appropriate PPE suitable for working with industrial lead-acid batteries while operating the BE ''(See [https://tech.bhs1.com/index.php/(BE-SL_%26_-DS)_Single_Level_%26_Double_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-400)#Lead-Acid_Battery_Explosion_Hazard Lead-Acid Battery Explosion Hazard] section).''<br /> *All data plates, warning labels, placards, etc. shall be in place and legible at all times. Contact BHS for re-placement data plates, warning labels, placards or instructions.<br /> *All users and service personnel shall be familiar with the meaning and risks associated with all data plates, warning labels, etc.<br /> *All operators and service personnel shall be aware of potential crush and shear points while operating or servicing the BE.<br /> *Keep hands and arms inside the operator compartment while operating the BE.<br /> *Remove BE from service if damaged, defective, or operating improperly (or becomes such while operating) until repairs can be made to correct any problem(s).<br /> *All operators shall be aware of the location of the end stops in the travel path to prevent driving the BE into the end stops.<br /> ===&lt;u&gt;&lt;big&gt;Do's and Don'ts&lt;/big&gt;&lt;/u&gt;===<br /> *'''DO NOT''' exceed the maximum capacity of the BE.<br /> *'''DO NOT''' modify or fit the BE with attachments without prior, written approval from BHS.<br /> *'''DO NOT''' perform any maintenance or service to the BE with a battery loaded on the BE.<br /> *'''DO NOT''' allow anyone to ride in or on the BE.<br /> *'''DO NOT''' operate the BE with any guard or cover removed unless required for maintenance or repair.<br /> *Disconnect the BE from all power sources before attempting to perform service or maintenance to the unit.<br /> *'''DO NOT''' drive the BE into the end stops.<br /> *'''DO NOT''' operate the BE if disengaged from the guidance track.<br /> *'''DO NOT''' allow a battery to exit the BE when a lift truck or battery stand is not present to accept the battery.<br /> *'''DO NOT''' rotate the arm onto a battery such that any part of the extractor arm, vacuum cup or magnet contacts the top of the battery.<br /> *'''DO NOT''' allow anyone to enter the area under the carriage without the service stands properly installed.<br /> *'''DO NOT''' use the BE in a manner for which it is not intended. Some examples of prohibited use are but not limited to:<br /> **To transport people<br /> **As a vehicle jack<br /> **To lift loads greater than its rated load capacity<br /> **Where unintentional movement may exist<br /> **Having direct contact with foodstuffs<br /> **In a potentially explosive atmosphere<br /> ==&lt;big&gt;De-Energization&lt;/big&gt;==<br /> 1. Fully lower the BE roller bed or position the roller bed on service stands if service requires the bed be raised. See Figures 1 &amp; 2.<br /> {|<br /> |[[File:WARNING-warn.png|alt=WARNING|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:WARNING-warn.png]]<br /> !Failure to properly support the roller bed when performing service under the BE could result in injury from the roller bed lowering unexpectedly.<br /> |}[[File:IOP-400 BE-SL&amp;DS (10-23) Fully Lower BE Roller Bed.png|alt=Fully lowered BE roller bed|none|thumb|FIGURE 1|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Fully_Lower_BE_Roller_Bed.png]][[File:IOP-400 BE-SL&amp;DS (10-23) BE Roller Bed on Service Stands .png|alt=Raised BE roller bed positioned on service stands|none|thumb|FIGURE 2|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_BE_Roller_Bed_on_Service_Stands_.png]]2. Turn key on dashboard to the “OFF” position. See Figure 3.[[File:IOP-400 BE-SL&amp;DS (10-23) De-Energization Figure 3.png|alt=Key on BE dashboard turned to the “OFF” position.|none|thumb|FIGURE 3|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_De-Energization_Figure_3.png]]3. Disconnect power to the extractor or shut off the electrical branch circuit breaker.<br /> {|<br /> |[[File:Danger Warning.png|alt=DANGER|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Danger_Warning.png]]<br /> |'''Failure to disconnect electrical power to the BE could result in electrical shock. Serious personal injury or death will occur.'''<br /> |}4. Actuate all hydraulic levers in both directions to re-lease any stored hydraulic pressure. See Figure 4.<br /> {|<br /> |[[File:WARNING-warn.png|alt=WARNING|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:WARNING-warn.png]]<br /> |'''Failure to release any stored hydraulic pres-sure could result in injury from:'''<br /> *'''Escaping hydraulic fluid under high pressure (see ''[https://tech.bhs1.com/index.php/(BE-SL_%26_-DS)_Single_Level_%26_Double_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-400)#Operational_Safety HYDRAULIC HAZARDS]'' in the ''[https://tech.bhs1.com/index.php/(BE-SL_%26_-DS)_Single_Level_%26_Double_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-400)#General_Safety GENERAL SAFETY]'' section).'''<br /> *'''Unexpected movement of hydraulic components.'''<br /> |}[[File:IOP-400 BE-SL&amp;DS (10-23) Actuate all Hydraulic Levers in Both Directions.png|alt=Actuate all hydraulic levers in both directions to release any stored hydraulic pressure.|none|thumb|FIGURE 4|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Actuate_all_Hydraulic_Levers_in_Both_Directions.png]]<br /> ==&lt;big&gt;Labels &amp; Placards&lt;/big&gt;==<br /> '''Operators should be familiar with the meaning of the following labels and placards found on the BE to ensure proper and safe operation.'''<br /> {| class=&quot;wikitable&quot;<br /> |-<br /> ![[File:Read Before Operating Notice.png|alt=Read Before Operating|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Read_Before_Operating_Notice.png]]<br /> |'''Read and understand instruction manual prior to use.'''<br /> |-<br /> ![[File:Lockout-Before-Servicing-Notice.png|alt=Lockout Before Servicing Unit|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Lockout-Before-Servicing-Notice.png]]<br /> |'''Lockout before servicing.'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Extractor Arm Positioning Arrows.png|alt=BE-SL &amp; BE-DS Extractor Arm Positioning Arrows|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Extractor_Arm_Positioning_Arrows.png]]<br /> |'''Extractor arm positioning arrows'''<br /> |-<br /> ![[File:Do Not Operate Without Guards or Covers Notice.png|alt=DO NOT Operate Without Guards or Covers Notice|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Do_Not_Operate_Without_Guards_or_Covers_Notice.png]]<br /> |'''DO NOT operate with guards or covers removed'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) No Riders Allowed.png|alt=No riders allowed|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_No_Riders_Allowed.png]]<br /> |'''NO riders allowed.'''<br /> |-<br /> ![[File:No Pacemakers Notice.png|alt=DO NOT operate by or in close proximity to people with pacemakers.|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:No_Pacemakers_Notice.png]]<br /> |'''DO NOT operate by or in close proximity to people with pacemakers.'''<br /> |-<br /> ![[File:Strong Magnet Field Hazard Warning.png|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Strong_Magnet_Field_Hazard_Warning.png]]<br /> [[File:Warning.png|alt=WARNING|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Warning.png]]<br /> |'''Strong Magnet Field Hazard'''<br /> *Attraction between magnet and metallic objects can crush.<br /> *Keep unsecured metallic objects away from magnet.<br /> *De-energize and lockout/tagout before servicing.<br /> |-<br /> ![[File:Chain Entanglement Hazard Warning.png|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Chain_Entanglement_Hazard_Warning.png]]<br /> [[File:Warning.png|alt=WARNING|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Warning.png]]<br /> |'''Chain Entanglement Hazard'''<br /> *Moving chains and sprockets can crush and cut.<br /> *Keep hands and fingers clear. Do not operate with guards removed.<br /> *De-energize and lockout/tagout before servicing.<br /> |-<br /> ![[File:Electrical Hazard Warning.png|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Electrical_Hazard_Warning.png]]<br /> [[File:Danger Warning.png|alt=DANGER|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Danger_Warning.png]]<br /> |'''Electrical Hazard'''<br /> *Energized components can cause electrical shock.<br /> *De-energize and lockout/tagout before servicing.<br /> |-<br /> ![[File:BE-SL and BE-DS Power Off-On.png|alt=BE-SL and BE-DS Power Off-On|frameless|180x180px|link=https://tech.bhs1.com/index.php/File:BE-SL_and_BE-DS_Power_Off-On.png]]<br /> |'''Power Off/On'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Horn Control.png|alt=BE-SL and BE-DS Horn Control |frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Horn_Control.png]]<br /> |'''Horn (If equipped)'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Vacuum Control.png|alt=BE-SL and BE-DS Vacuum Control |frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Vacuum_Control.png]]<br /> |'''Vacuum Off/On (If equipped)'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Magnet Extraction.png|alt=BE-SL and BE-DS Magnet Off/On|frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Magnet_Extraction.png]]<br /> |'''Magnet Off/On (If equipped)'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Powered Roller Cut Off Override.png|alt=BE-SL and BE-DS Powered Roller Cut Off Override|frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Powered_Roller_Cut_Off_Override.png]]<br /> |'''Powered Roller Cutout Override (If equipped)'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Rack-Level-Assist.png|alt=BE-SL and BE-DS Rack Level Assist |frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Rack-Level-Assist.png]]<br /> |'''Rack Level Assist Indicator (If equipped)'''<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> ! rowspan=&quot;3&quot; |[[File:IOP-400_BE-SL&amp;DS_(10-23)_Power_Rollers_and_Arm_Travel.png.png|alt=BE-SL &amp; DS Powered Roller and Arm Travel Controls|frameless|504x504px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Power_Rollers_and_Arm_Travel.png.png]]<br /> |'''Far Power Rollers'''<br /> |-<br /> |'''Arm Travel'''<br /> |-<br /> |'''Near Power Rollers'''<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> |+''BE-SL &amp; DS UNITS ONLY''<br /> ! colspan=&quot;3&quot; |[[File:IOP-400 BE-SL&amp;DS (10-23) BE-SL&amp;DS Units Platform Controls.png|alt=BE-SL &amp; DS Specific Controls|frameless|460x460px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_BE-SL&amp;DS_Units_Platform_Controls.png]]<br /> |-<br /> |Drive Forward/Reverse<br /> |Platform Raise/Lower<br /> |Arm Rotation Near/Far<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> |+''BE-TS &amp; QS UNITS ONLY''<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) BE-TS &amp; BE-QS Platform Raise and Lower Controls.png|alt=BE-TS &amp; BE-QS Platform Raise and Lower Controls|frameless|240x240px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_BE-TS_&amp;_BE-QS_Platform_Raise_and_Lower_Controls.png]]<br /> ! colspan=&quot;2&quot; |[[File:IOP-400 BE-SL&amp;DS (10-23)BE-TS &amp; BE-QS Specific Controls.png|alt=BE-TS &amp; BE-QS Specific-Controls|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)BE-TS_&amp;_BE-QS_Specific_Controls.png]]<br /> |-<br /> |Platform Raise/Lower<br /> |Drive Foward/Reverse<br /> |Arm Rotation Near/Far<br /> |}<br /> =&lt;big&gt;General Information&lt;/big&gt;=<br /> ==&lt;big&gt;Specification Data&lt;/big&gt;==<br /> [[File:BE-TS Specification Data.png|alt=IOP-401 BE-TS (10-23) Specification Data|frameless|600x600px]]<br /> {| class=&quot;wikitable&quot;<br /> | colspan=&quot;2&quot; |<br /> !BE-24-2-TS<br /> !BE-36-2-TS<br /> !BE-42-2-TS<br /> |-<br /> !A<br /> |Overall Length<br /> |156.5&quot;<br /> |180.5&quot;<br /> |192.5&quot;<br /> |-<br /> !B<br /> |Overall Width<br /> |72&quot;<br /> |72&quot;<br /> |72&quot;<br /> |-<br /> !C<br /> |Overall Height (Lowered)<br /> |158.188&quot;<br /> |158.188&quot;<br /> |160.688&quot;<br /> |-<br /> !<br /> |Overall Height (Raised w/ Overhead Guard)<br /> |182.375&quot;<br /> |182.375&quot;<br /> |182.375&quot;<br /> |-<br /> !<br /> |Overall Height (Raised w/ Strobe &amp; Alarm)<br /> |191.75&quot;<br /> |191.75&quot;<br /> |191.75&quot;<br /> |-<br /> !D<br /> |Wheel Base<br /> |98&quot;<br /> |122&quot;<br /> |134&quot;<br /> |-<br /> !E<br /> |Drive Wheel Center line<br /> |51&quot;<br /> |51&quot;<br /> |51&quot;<br /> |-<br /> !F<br /> |Battery Compartment Width<br /> |24&quot;<br /> |36&quot;<br /> |42&quot;<br /> |-<br /> !G<br /> |Ground Clearance<br /> |.625&quot;<br /> |.625&quot;<br /> |.625&quot;<br /> |-<br /> !H<br /> |Minimum Roller Height<br /> |6.5&quot;<br /> |6.5&quot;<br /> |6.5&quot;<br /> |-<br /> !I<br /> |Maximum Roller Height<br /> |96&quot;<br /> |96&quot;<br /> |96&quot;<br /> |-<br /> !J<br /> |Operator Platform Height (Lowered/Raised)<br /> |11&quot; / 103&quot;<br /> |11&quot; / 103&quot;<br /> |11&quot; / 103&quot;<br /> |}<br /> <br /> === UNITS WITH 10 HP POWER UNIT USED PRIOR TO DECEMBER, 2014 ===<br /> {| class=&quot;wikitable&quot;<br /> !<br /> !BE-24-2-TS<br /> !BE-36-2-TS<br /> !BE-42-2-TS<br /> |-<br /> |Travel Speed<br /> |0 to 190 ft/min / 0 to 0.97 m/s<br /> |0 to 190 ft/min / 0 to 0.97 m/s<br /> |0 to 190 ft/min / 0 to 0.97 m/s<br /> |-<br /> |Raise - Lower Speed<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |-<br /> |Powered Roller Speed<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |-<br /> |Arm Traverse Speed<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |-<br /> |Arm Rotation Time<br /> |6 s to 8 s<br /> |6 s to 8 s<br /> |6 s to 8 s<br /> |-<br /> |Draw Bar Pull / Vacuum<br /> <br /> (12&quot; / 305 mm Round Cup)<br /> |1,000 lb / 454 kg<br /> |1,000 lb / 454 kg<br /> |1,000 lb / 454 kg<br /> |-<br /> |Draw Bar Pull Magnet*<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |-<br /> |Vacuum Attach Time<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |-<br /> |Vacuum Release Time<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |-<br /> |Input Voltage<br /> |480 V / 3 ph / 60Hz<br /> |480 V / 3 ph / 60Hz<br /> |480 V / 3 ph / 60Hz<br /> |-<br /> |AC Current Draw<br /> |16.5 A<br /> |16.5 A<br /> |16.5 A<br /> |-<br /> |Control Circuit Voltage<br /> |120 V ac<br /> |120 V ac<br /> |120 V ac<br /> |-<br /> |Hydraulic Power Unit<br /> |10 hp / 7.46 kW<br /> |10 hp / 7.46 kW<br /> |10 hp / 7.46 kW<br /> |-<br /> |Hydraulic Pump<br /> |16 gal/min / 61 L/min<br /> |16 gal/min / 61 L/min<br /> |16 gal/min / 61 L/min<br /> |-<br /> |Power Unit<br /> |Hydraulic, Variable Displacement<br /> |Hydraulic, Variable Displacement<br /> |Hydraulic, Variable Displacement<br /> |-<br /> |Operating Pressure<br /> |1,500 psi / 103 bar<br /> |1,500 psi / 103 bar<br /> |1,500 psi / 103 bar<br /> |-<br /> |Vacuum Pump<br /> |1/3 hp / 0.25 kW<br /> |1/3 hp / 0.25 kW<br /> |1/3 hp / 0.25 kW<br /> |-<br /> |Vacuum<br /> |21&quot; Hg / 711 mbar<br /> |21&quot; Hg / 711 mbar<br /> |21&quot; Hg / 711 mbar<br /> |-<br /> |Full Load Capacity<br /> |10,000 lb / 4535 kg<br /> |10,000 lb / 4535 kg<br /> |10,000 lb / 4535 kg<br /> |-<br /> |Weight (Empty)<br /> |8,000 lb / 3629 kg<br /> |8,300 lb / 3765 kg<br /> |8,600 lb / 3901 kg<br /> |-<br /> |Total Compartment Rollers / Powered<br /> |11/5<br /> |11/5<br /> |11/5<br /> |-<br /> |Guide Track<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |-<br /> |Overall Dimensions (L x W x H)<br /> |156.5&quot; x 72&quot; x 158.188&quot;<br /> <br /> 3975 mm x 1829 mm x 4018 mm<br /> |180.5&quot; x 72&quot; x 158.188&quot;<br /> <br /> 4585 mm x 1829 mm x 4018 mm<br /> |192.5&quot; x 72&quot; x 160.688&quot;<br /> <br /> 4890 mm x 1829 mm x 4081 mm<br /> |-<br /> |Vacuum Arm Reach<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |-<br /> |Vacuum Arm Reach (Hydraulic Extension)<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |-<br /> |Magnet Arm Reach (Hydraulic Extension) Truck Side<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |-<br /> |Wheel Base<br /> |98&quot; / 2489 mm<br /> |122&quot; / 3099 mm<br /> |134&quot; / 3404 mm<br /> |-<br /> |Drive Wheel Center Line<br /> |51&quot; / 1295 mm<br /> |51&quot; / 1295 mm<br /> |51&quot; / 1295 mm<br /> |-<br /> |Battery Compartment Width<br /> |24&quot; / 610 mm<br /> |36&quot; / 915 mm<br /> |42&quot; / 1067 mm<br /> |-<br /> |Maximum Battery Dimensions<br /> <br /> (L x W x H)<br /> |48&quot; x 23&quot; x 34&quot;<br /> <br /> 1219 mm x 584 mm x 864 mm<br /> |48&quot; x 35&quot; x 34&quot;<br /> <br /> 1219 mm x 889 mm x 864 mm<br /> |48&quot; x 41&quot; x 34&quot;<br /> <br /> 1219 mm x 1041 mm x 864 mm<br /> |-<br /> |Minimum Battery Width<br /> <br /> (with vacuum / magnet)<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |-<br /> |Minimum Battery Height<br /> |17.75&quot; / 451 mm<br /> |17.75&quot; / 451 mm<br /> |17.75&quot; / 451 mm<br /> |-<br /> |Ground Clearance<br /> |0.63&quot; / 16 mm<br /> |0.63&quot; / 16 mm<br /> |0.63&quot; / 16 mm<br /> |-<br /> |Roller Height<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |-<br /> ! colspan=&quot;4&quot; |NOTES<br /> |-<br /> | colspan=&quot;4&quot; |''Specifications may vary ± 5% because of temperature, floor considerations, and operator efficiency. Values represented under normal operating conditions.''<br /> |-<br /> | colspan=&quot;4&quot; |''* Varies with battery case thickness and condition.''<br /> |}<br /> <br /> === UNITS WITH 20 HP POWER UNIT USED DECEMBER, 2014 TO PRESENT ===<br /> {| class=&quot;wikitable&quot;<br /> !<br /> !BE-24-2-TS<br /> !BE-36-2-TS<br /> !BE-42-2-TS<br /> |-<br /> |Travel Speed<br /> |0 to 240 ft/min / 0 to 1.22 m/s<br /> |0 to 240 ft/min / 0 to 1.22 m/s<br /> |0 to 240 ft/min / 0 to 1.22 m/s<br /> |-<br /> |Raise - Lower Speed<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |-<br /> |Powered Roller Speed<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |-<br /> |Arm Traverse Speed<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |-<br /> |Arm Rotation Time<br /> |6 s to 8 s<br /> |6 s to 8 s<br /> |6 s to 8 s<br /> |-<br /> |Draw Bar Pull / Vacuum<br /> <br /> (12&quot; / 305 mm Round Cup)<br /> |1,000 lb / 454 kg<br /> |1,000 lb / 454 kg<br /> |1,000 lb / 454 kg<br /> |-<br /> |Draw Bar Pull Magnet*<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |-<br /> |Vacuum Attach Time<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |-<br /> |Vacuum Release Time<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |-<br /> |Input Voltage<br /> |480 V / 3 ph / 60Hz<br /> |480 V / 3 ph / 60Hz<br /> |480 V / 3 ph / 60Hz<br /> |-<br /> |AC Current Draw<br /> |35 A<br /> |35 A<br /> |35 A<br /> |-<br /> |AC Current Draw w/ Electric Drive Option<br /> |42 A<br /> |42 A<br /> |42 A<br /> |-<br /> |Control Circuit Voltage<br /> |120 V ac<br /> |120 V ac<br /> |120 V ac<br /> |-<br /> |Hydraulic Power Unit<br /> |20 hp / 14.9 kW<br /> |20 hp / 14.9 kW<br /> |20 hp / 14.9 kW<br /> |-<br /> |Hydraulic Power Unit w/ Electric Drive Option<br /> |25 hp / 18.7 kW<br /> |25 hp / 18.7 kW<br /> |25 hp / 18.7 kW<br /> |-<br /> |Hydraulic Pump<br /> |22 gal/min / 83 L/min<br /> |22 gal/min / 83 L/min<br /> |22 gal/min / 83 L/min<br /> |-<br /> |Power Unit<br /> |Hydraulic, Variable Displacement<br /> |Hydraulic, Variable Displacement<br /> |Hydraulic, Variable Displacement<br /> |-<br /> |Operating Pressure<br /> |1,500 psi / 103 bar<br /> |1,500 psi / 103 bar<br /> |1,500 psi / 103 bar<br /> |-<br /> |Vacuum Pump<br /> |1/3 hp / 0.25 kW<br /> |1/3 hp / 0.25 kW<br /> |1/3 hp / 0.25 kW<br /> |-<br /> |Vacuum<br /> |21&quot; Hg / 711 mbar<br /> |21&quot; Hg / 711 mbar<br /> |21&quot; Hg / 711 mbar<br /> |-<br /> |Full Load Capacity<br /> |10,000 lb / 4535 kg<br /> |10,000 lb / 4535 kg<br /> |10,000 lb / 4535 kg<br /> |-<br /> |Weight (Empty)<br /> |8,000 lb / 3629 kg<br /> |8,300 lb / 3765 kg<br /> |8,600 lb / 3901 kg<br /> |-<br /> |Total Compartment Rollers / Powered<br /> |11/5<br /> |11/5<br /> |11/5<br /> |-<br /> |Guide Track<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |-<br /> |Overall Dimensions (L x W x H)<br /> |156.5&quot; x 72&quot; x 158.188&quot;<br /> <br /> 3975 mm x 1829 mm x 4018 mm<br /> |180.5&quot; x 72&quot; x 158.188&quot;<br /> <br /> 4585 mm x 1829 mm x 4018 mm<br /> |192.5&quot; x 72&quot; x 160.688&quot;<br /> <br /> 4890 mm x 1829 mm x 4081 mm<br /> |-<br /> |Vacuum Arm Reach<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |-<br /> |Vacuum Arm Reach (Hydraulic Extension)<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |-<br /> |Magnet Arm Reach (Hydraulic Extension) Truck Side<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |-<br /> |Wheel Base<br /> |98&quot; / 2489 mm<br /> |122&quot; / 3099 mm<br /> |134&quot; / 3404 mm<br /> |-<br /> |Drive Wheel Center Line<br /> |51&quot; / 1295 mm<br /> |51&quot; / 1295 mm<br /> |51&quot; / 1295 mm<br /> |-<br /> |Battery Compartment Width<br /> |24&quot; / 610 mm<br /> |36&quot; / 915 mm<br /> |42&quot; / 1067 mm<br /> |-<br /> |Maximum Battery Dimensions<br /> <br /> (L x W x H)<br /> |48&quot; x 23&quot; x 34&quot;<br /> <br /> 1219 mm x 584 mm x 864 mm<br /> |48&quot; x 35&quot; x 34&quot;<br /> <br /> 1219 mm x 889 mm x 864 mm<br /> |48&quot; x 41&quot; x 34&quot;<br /> <br /> 1219 mm x 1041 mm x 864 mm<br /> |-<br /> |Minimum Battery Width<br /> <br /> (with vacuum / magnet)<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |-<br /> |Minimum Battery Height<br /> |17.75&quot; / 451 mm<br /> |17.75&quot; / 451 mm<br /> |17.75&quot; / 451 mm<br /> |-<br /> |Ground Clearance<br /> |0.63&quot; / 16 mm<br /> |0.63&quot; / 16 mm<br /> |0.63&quot; / 16 mm<br /> |-<br /> |Roller Height<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |-<br /> ! colspan=&quot;4&quot; |NOTES<br /> |-<br /> | colspan=&quot;4&quot; |''Specifications may vary ± 5% because of temperature, floor considerations, and operator efficiency. Values represented under normal operating conditions.''<br /> |-<br /> | colspan=&quot;4&quot; |''* Varies with battery case thickness and condition.''<br /> |}<br /> ==&lt;big&gt;Pre-Installation Check&lt;/big&gt;==<br /> ===&lt;big&gt;&lt;u&gt;Floor Conditions&lt;/u&gt;&lt;/big&gt;===<br /> The floor is the single most critical area of the battery room.  A bad floor can cause significant issues with the installation as well as downtime and maintenance problems with the extractor.  The floor should be verified as to its minimum thickness and strength with user.  As noted on the drawing, the specific requirement of flatness for your particular type of system is listed. Below is a chart stating floor requirements.  If possible, especially on double stack and higher systems, a digital level should be used to shoot the grade for compliance with the specification.  The floor should also be inspected for severe cracks or excessively wide expansion joints in the travel path of the machine.  If floor drains are present, they must not have a grade to the opening that encroaches into the travel path. <br /> <br /> F-min is a rating method used to evaluate the flatness and levelness of a floor designated as &quot;defined travel path&quot;.  For example, an F-min rating of 60 means that there is no more than .129&quot; of variation in the transverse axis (wheels left to right) and .287&quot; variation in the longitudinal axis (front to back) on the equipment.<br /> <br /> To avoid potential damage to drive wheel assemblies, guide track, structural components, guide rollers  and issues with the inner frame equalization the &quot;defined travel path&quot; of the Battery Extractor should meet or exceed the recommended F-min specification. See chart below for the model specifications.<br /> {| class=&quot;wikitable&quot;<br /> !Model<br /> !F-Min<br /> !+/- Longitudinal<br /> !+/- Transverse<br /> !Slope Defect<br /> |-<br /> |SL, DS<br /> |40<br /> |.287&quot;<br /> |.192&quot;<br /> |.096&quot;<br /> |-<br /> |TS<br /> |60<br /> |.186&quot;<br /> |.129&quot;<br /> |.066&quot;<br /> |-<br /> |QS<br /> |85<br /> |.131&quot;<br /> |.091&quot;<br /> |.047&quot;<br /> |}[[File:IOP-400 BE-SL&amp;DS (10-23) Floor Conditions Pre-Installation Check.png|alt=BE-TS Floor Conditions Pre-Installation Check|frameless|500x500px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Floor_Conditions_Pre-Installation_Check.png]]<br /> ==&lt;big&gt;Operating Controls &amp; Instructions&lt;/big&gt;==<br /> <br /> === &lt;big&gt;&lt;u&gt;Operator Console&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Operator Console.png|alt=BE-TS Operator Console|frameless|1080x1080px]]<br /> <br /> '''''NOTE:''' Safety devices for the machine and the machine operating area SHALL NOT be rendered inoperable or misused.'' <br /> <br /> ''Typical BE-TS operator console shown above. Position of optional controls may vary from that shown depending on age of unit and/or combination of optional controls present.''<br /> <br /> ''HMI display standard on units shipped after February, 2020 for Industrial Internet of Things (IIoT) package.''<br /> <br /> ==== &lt;u&gt;&lt;big&gt;Safety Features&lt;/big&gt;&lt;/u&gt; ====<br /> &lt;u&gt;Key Switch&lt;/u&gt; – Located on the dash (see above).  Primary on/off switch to prevent unauthorized personnel from operating the BE.<br /> <br /> &lt;u&gt;Emergency Stop&lt;/u&gt; – Located on the dash (see above). Will stop all functions immediately, locking all hydraulics in place. To use, press down on the red button. The machine key must be used to reset the emergency stop.<br /> <br /> &lt;u&gt;Foot Switch&lt;/u&gt; – Must be depressed to operate the BE.  Stepping off the foot switch will stop all functions immediately, locking all hydraulics in place.  To resume use, depress the foot switch.<br /> <br /> &lt;u&gt;Gate Switch&lt;/u&gt; – The gate must be fully closed for the BE to operate.<br /> <br /> &lt;u&gt;Extractor Arm Switch&lt;/u&gt; – Does not permit the machine to move forward or backward unless the extractor arm is located in the center of the carriage between the indicating arrows located on the arm guard.<br /> <br /> &lt;u&gt;Powered Roller Cutout (PRC-1 or PRC-2) ''(if equipped)''&lt;/u&gt; – Disengages the powered roller function when the photo eye positioned on the edge of the BE battery compartment is disrupted by a battery, requiring additional input from the operator. Pressing the &quot;Power Roller Cutout&quot; override button (see above) on the dash will resume  powered roller operation when loading or unloading batteries from the BE carriage.<br /> <br /> &lt;u&gt;Horn ''(If equipped)''&lt;/u&gt; – Button located on the dash (see above).  Used to alert personnel before moving the BE.<br /> <br /> &lt;u&gt;Strobe Light ''(If equipped)''&lt;/u&gt; – Located on a vertical stanchion mounted to the right rear of the operator compartment. For units equipped with optional overhead guard (OHG), the beacon is located above of the operator compartment.  Beacon automatically flashes when the BE is switched on to visually notify the BE is in use.<br /> <br /> &lt;u&gt;Audible Alarm ''(if equipped)''&lt;/u&gt; – Mounted in the same location as the Strobe Light.  Automatically sounds when the BE is switched on to notify personnel that the BE is in use.<br /> <br /> &lt;u&gt;Blue Light ''(if equipped)''&lt;/u&gt; - Mounted at an elevated position on either end of the extractor which project a bright, highly concentrated blue beam pattern on the ground visually alerting personnel to the direction the extractor is moving.<br /> <br /> === &lt;big&gt;&lt;u&gt;Operation Overview&lt;/u&gt;&lt;/big&gt; ===<br /> <br /> * All operators should be familiar with the operator console of the extractor before performing any battery changes.  The controls of the console are simple and well marked.  It consists of six, manually operated, hydraulic control valves and a three position selector switch which controls the left and right vacuum cups (or optional magnets).<br /> * The operator shall make certain there are no persons or obstacles in the extractor path prior to traveling forward or reverse.<br /> * All manual valves are moved in the direction of the function travel which it controls with exception of the lift/lower valve, which is pulled toward the operator for &quot;up&quot; and pushed away for &quot;down.&quot;<br /> * In the event of any failure or malfunction, step off the dead-man switch or press the E-stop button and all functions will stop immediately, locking all hydraulics in place.<br /> * The extractor arm must be in the center of the carriage or the unit will not travel forward or reverse.<br /> * To ensure smooth operation, all valve movements should be made in a slow, deliberate motion.<br /> * Only one key should be provided to operate the extractor.<br /> * When leaving the machine, the operator shall turn off the key switch, remove the key and logout out of the IIoT (if equipped) to prevent unauthorized use<br /> * Ensure all the batteries and cables are properly stored in the battery stands prior to moving the BE.<br /> * The BE is designed to carry only one battery in each compartment on the carriage.<br /> * When loading the BE, position the batteries in the center of the compartments on the powered rollers to prevent any battery movement when transporting.<br /> * Ensure there are no projections outside of the carriage before moving the BE.<br /> <br /> === &lt;u&gt;&lt;big&gt;Operating Instructions&lt;/big&gt;&lt;/u&gt; ===<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Pre-Change Out Preparation&lt;/u&gt;&lt;/big&gt; ====<br /> 1. Position lift truck for change out in designated area.<br /> <br /> 2. Remove all battery restraints and disconnect battery cables following manufacturers guidelines.  (Be sure to position battery cables so as not to be damaged by the battery during change out.)<br /> <br /> 3. Board battery extractor and close safety gate.  (Gate must be fully closed or unit will not operate.)<br /> <br /> 4. Turn key switch to &quot;ON&quot; position. <br /> <br /> 5. Log in on the HMI display (if equipped with BE-IIoT package).<br /> <br /> 6. Depress foot pedal.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Discharged Battery Removal&lt;/u&gt;&lt;/big&gt; ====<br /> 1. Move extractor forward or reverse to position center of empty compartment with center of lift truck battery compartment. (Lead roller of extractor is equipped with a centering groove.  Users may find it beneficial to mark center of lift truck compartment to aid in alignment.)<br /> <br /> 2. Align extractor's roller compartment height with lift truck's battery compartment.<br /> <br /> 3. Rotate extractor arm into battery compartment aligned in Step 2.<br /> <br /> 4. Move extractor arm toward battery until vacuum cup/magnet contacts battery.<br /> <br /> [[File:NOTICE-warn.png|alt=NOTICE|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:NOTICE-warn.png]] '''DO NOT force cup/magnet into battery after initial contact with battery is made.'''<br /> <br /> 5. Energize vacuum/magnet by turning selector switch to proper direction, left or right.<br /> <br /> 6. Move extractor arm away from lift truck toward center of extractor roller bed, removing discharged battery.  (Battery should be pulled past first three idler rollers onto first or second powered roller.)<br /> <br /> 7. Turn off vacuum/magnet and move extractor arm away from battery 1&quot; to 2&quot;.<br /> <br /> 8. Rotate extractor arm out of battery compartment into opposite compartment (if empty) and center arm in carriage.<br /> <br /> 9. Move battery into center of compartment using powered rollers.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Charged Battery Retrieval&lt;/u&gt;&lt;/big&gt; ====<br /> 1. Locate charged battery for appropriate type of lift truck being changed.<br /> <br /> 2. Raise battery extractor roller compartment to proper level to gain access as needed to disconnect desired battery from its charger and disengage battery safety stop.<br /> <br /> [[File:WARNING-warn.png|alt=WARNING|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:WARNING-warn.png]] '''ALWAYS be sure charging has been completed and charger is not still charging battery. Dangerous sparking/arcing can occur if battery is unplugged from charger while charging.'''<br /> <br /> 3. Move extractor to appropriate rack position and align empty roller compartment with the center of the battery storage rack compartment.  ''(The battery safety stop of each compartment is the center of that compartment and should be used for alignment with the groove in the lead roller of the battery extractor compartment.'') <br /> <br /> 4. Rotate arm into empty compartment (if not already positioned there.)<br /> <br /> 5. Move extractor arm toward battery until vacuum cup/magnet contacts battery.<br /> <br /> 6. Energize vacuum cup/magnet by turning selector switch to proper direction, left or right.<br /> <br /> [[File:NOTICE-warn.png|alt=NOTICE|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:NOTICE-warn.png]] '''DO NOT force cup/magnet into battery after initial contact with battery is made.'''<br /> <br /> 7. Move extractor arm away from battery rack toward center of extractor roller bed, removing charged battery.  (Battery should be pulled past first three idler rollers onto first or second powered roller.)<br /> <br /> 8. Turn off vacuum/magnet and move extractor arm away from battery 1&quot; to 2&quot;.<br /> <br /> 9. Rotate extractor arm out of battery compartment into fully vertical position.<br /> <br /> 10. Move battery into center of compartment using powered rollers.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Discharged Battery Return&lt;/u&gt;&lt;/big&gt; ====<br /> 1. If required, adjust extractor compartment height to battery rack level with open battery compartment.  Drive extractor to align roller compartment containing discharged battery with open battery compartment.<br /> <br /> 2. Return discharged battery to battery rack using powered rollers.<br /> <br /> '''''NOTE:''''' ''In most instances, batteries can be deposited into battery racks in one motion using only powered rollers.  When this does not work, the battery may need slight assistance from extractor arm.  To do this, rotate arm into compartment such as one would if removing battery from rack.  If extractor is vacuum equipped, position top edge of cup slightly higher than edge of battery (or over lifting eye if so equipped) to prevent cup from adhering to battery - No vacuum/magnet is necessary for pushing. DO NOT activate vacuum/magnet switch.  Slowly push battery into rack until fully into compartment.''<br /> <br /> 3. Engage battery safety stop and connect battery to charger as required.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Charged Battery Installation&lt;/u&gt;&lt;/big&gt; ====<br /> 1. Lower extractor to fully lowered position.<br /> <br /> 2. Drive extractor back to lift truck and align roller compartment containing charged battery as performed in steps 1 and 2 of &quot;Discharged Battery Removal&quot;.<br /> <br /> 3. Move charged battery toward lift truck compartment by using powered rollers, verifying precise battery alignment.<br /> <br /> [[File:NOTICE-warn.png|alt=NOTICE|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:NOTICE-warn.png]] '''Many batteries are a tight fit into lift truck battery compartments. Care MUST be taken to ensure alignment is precise to avoid damage to battery, lift truck, and/or battery extractor.'''<br /> <br /> 4. Adjust extractor vertically as well as horizontally, if needed<br /> <br /> 5. Insert battery into lift truck as far as possible using only the powered rollers.<br /> <br /> 6. Rotate extractor arm into compartment and SLOWLY push battery into lift truck.  (Be sure to watch battery cables for interference.)<br /> <br /> 7. Return extractor arm to center of roller bed and lower extractor to fully lowered position.  Drive extractor out of immediate area.<br /> <br /> 8. Turn off key switch, remove key from switch, log out on the HMI display (if equipped with BE-IIoT package) and carefully exit extractor.<br /> <br /> 9. Secure newly installed battery in lift truck and reconnect battery cables.<br /> <br /> 10. Return lift truck to service<br /> {|<br /> ![[File:Caution-Warning.png|alt=CAUTION|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:Caution-Warning.png]]<br /> |'''DO NOT drive the BE into the travel path end stops. The end stops are designed to prevent the BE from accidentally traveling beyond its designated travel path. Driving the BE into the end stops will cause the BE to stop suddenly, possibly causing damage to the end stop, the BE and/or personal injury.'''<br /> |}<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Optional Powered Roller Cutout Operation&lt;/u&gt;&lt;/big&gt; ====<br /> Units equipped with optional Powered Roller Cutout, the powered roller override button must be depressed in addition to actuating the hydraulic valve when a battery disrupts the photo eye(s) at the edge of the battery compartments while using the powered rollers to transfer batteries on and off of the battery extractor.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;IIoT Equipped Units&lt;/u&gt;&lt;/big&gt; ====<br /> Units shipped after February, 2020 are equipped with BE-IIoT (Industrial Internet of Things) package. Operators must log in to the BE-IIoT system using the HMI (Human Machine Interface) display located on the dashboard to operate the extractor.<br /> <br /> When finished operating the extractor, the operator should log out of the BE-IIoT to prevent unauthorized access and/or operation of the extractor.<br /> <br /> == &lt;big&gt;Manual Unloading&lt;/big&gt; ==<br /> '''Lockout/tagout and de-energize all equipment prior to manually unloading any battery.'''<br /> <br /> In the event of power loss or an operational malfunction of the BE not allowing a battery to be unloaded using normal operating procedures, it is recommended a battery be removed from the BE using certified and approved vertical extraction methods and devices.<br /> {|<br /> |[[File:DANGER-warn.png|alt=DANGER|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:DANGER-warn.png]]<br /> |'''Read, understand and observe all safety warnings and procedures related to the vertical extraction device(s) being used.'''<br /> |}<br /> Should the status of the BE not allow for safe vertical extraction (due to position in the battery aisle or level of the inner carriage), only repairs required to safely maneuver the BE to a position allowing for safe vertical extraction should be made.  Once any batteries are safely unloaded, any remaining repairs can be made.<br /> {|<br /> |[[File:DANGER-warn.png|alt=DANGER|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:DANGER-warn.png]]<br /> |'''Extreme care should be taken when working under or around equipment supporting elevated loads. Unexpected movement of the equipment could cause the load and/or equipment to fall. ALWAYS be sure devices of adequate size and strength are in place to prevent any personnel working under the elevated load from being crushed. Serious personal injury or death will occur.'''<br /> |}<br /> <br /> == &lt;big&gt;Spare Parts List&lt;/big&gt; ==<br /> Use only BHS approved replacement parts.<br /> <br /> Refer to the appropriate Spare Parts Kit (vacuum equipped units - Pt# BE-SPKV-TS, magnet equipped units - Pt# BE-SPKM-TS) for the list of items recommended by BHS to have on hand for BE-TS models to minimize any downtime due to minor breakdowns that may occur under normal operating conditions.<br /> <br /> BHS offers many replacement parts kits containing relevant or related parts when replacing certain individual parts or replacing any obsolete / upgraded parts.<br /> <br /> BHS also offers a supplement hose kit (Pt# 80342003) which contains an assortment of hoses allowing any hose on the extractor to be replaced immediately with a temporary hose of equal length or longer. After the extractor is back up and running, the failed hose can be taken to have an exact replacement made. Once the new hose is made and installed, the temporary hose can be returned to the kit for future use.<br /> <br /> Go to [[www.bhs1.com]] and click &quot;Parts&quot; for all the latest parts kits and corresponding installation instructions (if applicable).<br /> <br /> BHS recommends that a full maintenance inspection report similar to the one provided be done at least once a month.<br /> <br /> Any parts found to be excessively worn or damaged should promptly be replaced unless said parts pose a safety risk to the operator and/or extractor, in which case the unit should be removed from service until the problem(s) are remedied (See<br /> <br /> Operator's Daily Checklist.)<br /> <br /> ''Note: Spare parts kits contain parts for the most current machine design/configuration. Due to continuous design and manufacturing updates and improvements, not all the parts in the spare parts kits may be compatible with older units. Consult factory when ordering spare or replacement parts for existing units in the field to ensure part compatibility.''<br /> <br /> = &lt;big&gt;Parts Sections&lt;/big&gt; =<br /> <br /> == &lt;big&gt;Chassis&lt;/big&gt; ==<br /> <br /> === &lt;big&gt;&lt;u&gt;Equalization Components&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Equalization Components.png|alt=BE-TS Chassis Equalization|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PT0222-1<br /> |LINK-CONNECTING-#60<br /> |<br /> |<br /> |8<br /> |-<br /> |2<br /> |HW0017<br /> |NUT-HEX-3/4-10<br /> |<br /> |<br /> |8<br /> |-<br /> |3<br /> |HW0115<br /> |WASHER-LOCK-3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |43097001<br /> |STUD-ANCHOR-5&quot;<br /> |<br /> |''Upper''<br /> |4<br /> |-<br /> |5<br /> |HW0020<br /> |NUT-JAM-3/4-10<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43097002<br /> |STUD-ANCHOR-2&quot;<br /> |<br /> |''Lower''<br /> |4<br /> |-<br /> |7<br /> |00158001-14<br /> |CHAIN-ROLLER-#60<br /> |<br /> |<br /> |4<br /> |}<br /> [[File:BE-TS Equalization Components - 1.0.2.png|alt=BE-TS Chassis Equalization 2|frameless|575x575px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PT0416<br /> |COLLAR-SHAFT-1 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |2<br /> |43097006<br /> |KEY-3/8&quot; X 2 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |PT0224<br /> |SPROCKET-60B12 X 1 1/2&quot;<br /> |<br /> |''Keyed in line''<br /> |8<br /> |-<br /> |4<br /> |PT0405<br /> |FLANGE BEARING-2 BOLT-1 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1 1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |6<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> | rowspan=&quot;4&quot; |7<br /> |43127001<br /> |SHAFT-EQUALIZATION-81.75&quot;<br /> |<br /> |''BE-24-2-TS''<br /> |2<br /> |-<br /> |43327001<br /> |SHAFT-EQUALIZATION-105.75&quot;<br /> |<br /> |''BE-36-2-TS''<br /> |2<br /> |-<br /> |44327001<br /> |SHAFT-EQUALIZATION-117.75&quot;<br /> |<br /> |''BE-42-2-TS''<br /> |2<br /> |-<br /> |44527001<br /> |SHAFT-EQUALIZATION-75.75&quot;<br /> |<br /> |''BE-42-1-TS''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |8<br /> |PT0503<br /> |BEARING-FLANGED LOAD-2 1/4&quot;<br /> |<br /> |''Used after December 2003''<br /> |8<br /> |-<br /> |43026001<br /> |BEARING-FLANGED LOAD-2 1/4&quot; ''(MACHINED)''<br /> |<br /> |''Used prior to December 2003''<br /> |8<br /> |-<br /> |9<br /> |HW0025<br /> |NUT-JAM-7/8-14<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0117<br /> |WASHER-LOCK-7/8&quot; ''(NOT SHOWN)''<br /> |<br /> |''Used prior to August 2002''<br /> |8<br /> |}<br /> <br /> === &lt;u&gt;'''&lt;big&gt;Bridge &amp; Cross Bar&lt;/big&gt;'''&lt;/u&gt; ===<br /> [[File:BE-TS Bridge and Cross Bar.png|alt=BE-TS Bridge and Cross Bar|frameless|524x524px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1 1/4&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |2<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |20<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |20<br /> |-<br /> |4<br /> |HW0515<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |''Fully Threaded''<br /> |8<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> === &lt;u&gt;'''&lt;big&gt;Lift Cylinder Connections&lt;/big&gt;'''&lt;/u&gt; ===<br /> [[File:BE-TS Lift Cylinder Connections.png|alt=BE-TS Lift Cylinder Connections|frameless|589x589px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |00158001-13<br /> |CHAIN-ROLLER-#80<br /> |<br /> |<br /> |4<br /> |-<br /> |2<br /> |HW0014<br /> |NUT-HEX-1-8<br /> |<br /> |<br /> |8<br /> |-<br /> |3<br /> |43897002<br /> |STUD-LIFT-INNER FRAME<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |PT0204<br /> |LINK-CONNECTING-#80<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |43897001<br /> |STUD-LIFT-OUTER FRAME<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43815018<br /> |BRACKET-CYLINDER SUPPORT<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |SS0761<br /> |U-BOLT-CYLINDER MOUNTING<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |12<br /> |-<br /> |9<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |10<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |8<br /> |-<br /> | rowspan=&quot;2&quot; |11<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |<br /> |''Idler caster end of unit'' <br /> |2<br /> |-<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |''Drive wheel end of unit'' <br /> |2<br /> |-<br /> |12<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |14<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |43822002<br /> |CLEVIS ASSEMBLY<br /> |<br /> |''Sold as assembly only''<br /> |4<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Guidance Arm&lt;/big&gt;&lt;/u&gt;''' ===<br /> [[File:BE-TS Guidance Arm.png|alt=BE-TS Guidance Arm|frameless|562x562px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> ! colspan=&quot;2&quot; |NO. REQ<br /> |-<br /> |1<br /> |43015011<br /> |GUIDE ARM WELDMENT, 2 ROLLER<br /> |<br /> |<br /> |2<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |2<br /> |43017025<br /> |SPACER-GUIDE ARM<br /> |<br /> |''† 1/2&quot; thick''<br /> |4<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |3<br /> |41215204<br /> |GUIDE ARM WELDMENT, 4 ROLLER<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |2<br /> |-<br /> |4<br /> |41217274<br /> |SPACER-GUIDE ARM<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |4<br /> |-<br /> |5<br /> |43012007<br /> |CAM ROLLER-1 3/4&quot;<br /> |<br /> |<br /> |4<br /> |8<br /> |-<br /> |6<br /> |HW0115<br /> |WASHER-LOCK-3/4&quot;<br /> |<br /> |<br /> |4<br /> |8<br /> |-<br /> |7<br /> |HW0011<br /> |NUT-HEX-3/4-16<br /> |<br /> |<br /> |4<br /> |8<br /> |-<br /> |8<br /> |HW0509<br /> |BOLT-HHCS-1/2-13 X 4-1/2&quot;<br /> |<br /> |<br /> |4<br /> |6<br /> |-<br /> |9<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |6<br /> |-<br /> |10<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |4<br /> |6<br /> |-<br /> |11<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |4<br /> |6<br /> |-<br /> |12<br /> |41215234<br /> |GUIDE ARM WELDMENT (POLY)<br /> |<br /> |<br /> |2<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |13<br /> |41217317<br /> |POLY SLIDE MOUNTING BLOCK<br /> |<br /> |<br /> |4<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |14<br /> |41217318<br /> |POLY SLIDE<br /> |<br /> |<br /> |4<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |15<br /> |HW0501<br /> |BOLT-HHCS-1/2-13 X 1&quot;<br /> |<br /> |<br /> |12<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |16<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |12<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |17<br /> |91253A546<br /> |BOLT FHSCS-1/4-20 X 1-1/2&quot;<br /> |<br /> |<br /> |8<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |18<br /> |HW0003<br /> |NUT-NILN-1/4-20<br /> |<br /> |<br /> |8<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> ! colspan=&quot;7&quot; |NOTES<br /> |-<br /> | colspan=&quot;7&quot; |''† Older units equipped with (1) 1&quot; thick spacer per guide arm bracket.'' <br /> |-<br /> | colspan=&quot;7&quot; |''†† Multiple styles of guide arms have been utilized on extractors. Refer to the parts diagrams for correct replacement parts.'' <br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Roller Bed Componenets&lt;/big&gt;&lt;/u&gt;''' ===<br /> ==== '''&lt;big&gt;''Idler Rollers''&lt;/big&gt;''' ====<br /> [[File:BE-TS Idler Rollers.png|alt=BE-TS Idler Rollers|frameless|746x746px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;3&quot; |1<br /> |43182001<br /> |LEAD ROLLER ASSEMBLY-24&quot;<br /> |<br /> |''With alignment groove''<br /> |4<br /> |-<br /> |43382001<br /> |LEAD ROLLER ASSEMBLY-36&quot;<br /> |<br /> |''With alignment groove''<br /> |4<br /> |-<br /> |43482001<br /> |LEAD ROLLER ASSEMBLY-42&quot;<br /> |<br /> |''With alignment groove''<br /> |4<br /> |-<br /> | rowspan=&quot;3&quot; |2<br /> |43182002<br /> |IDLER ROLLER ASSEMBLY-24&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |43382002<br /> |IDLER ROLLER ASSEMBLY-36&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |43482002<br /> |IDLER ROLLER ASSEMBLY-42&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> | rowspan=&quot;3&quot; |3<br /> |43187002<br /> |SHAFT-HEX-.75&quot; X 25.75&quot;<br /> |<br /> |''24&quot; compartments''<br /> |8<br /> |-<br /> |43387002<br /> |SHAFT-HEX-.75&quot; X 37.75&quot;<br /> |<br /> |''36&quot; compartments''<br /> |8<br /> |-<br /> |43487002<br /> |SHAFT-HEX-.75&quot; X 43.75&quot;<br /> |<br /> |''42&quot; compartments''<br /> |8<br /> |-<br /> | rowspan=&quot;3&quot; |4<br /> |43187003<br /> |SHAFT-HEX-.75&quot; X 27.5&quot;<br /> |<br /> |''24&quot; compartments''<br /> |4<br /> |-<br /> |43387003<br /> |SHAFT-HEX-.75&quot; X 39.5&quot;<br /> |<br /> |''36&quot; compartments''<br /> |4<br /> |-<br /> |43487003<br /> |SHAFT-HEX-.75&quot; X 45.5&quot;<br /> |<br /> |''42&quot; compartments''<br /> |4<br /> |-<br /> |5<br /> |HW1058<br /> |PIN-HITCH<br /> |<br /> |<br /> |24<br /> |}<br /> '''&lt;big&gt;''Powered Rollers''&lt;/big&gt;'''<br /> <br /> [[File:BE-TS Powered Rollers.png|alt=BE-TS Powered Rollers|frameless|546x546px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;3&quot; |1<br /> |43182003<br /> |POWERED ROLLER-24&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |43382003<br /> |POWERED ROLLER-36&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |43485003<br /> |POWERED ROLLER-42&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |2<br /> |43087001<br /> |JOURNAL-POWERED ROLLER<br /> |<br /> |<br /> |10<br /> |-<br /> |3<br /> |PT0404<br /> |FLANGE BEARING-3-BOLT-1&quot;<br /> |<br /> |<br /> |20<br /> |-<br /> |4<br /> |HW0321<br /> |BOLT-HHCS-5/16-18 X 1 1/4&quot;<br /> |<br /> |<br /> |60<br /> |-<br /> |5<br /> |HW0105<br /> |WASHER-LOCK-5/16&quot;<br /> |<br /> |<br /> |60<br /> |-<br /> |6<br /> |HW0004<br /> |NUT-HEX-5/16-18<br /> |<br /> |<br /> |60<br /> |-<br /> |7<br /> |PT0033<br /> |SPROCKET-35B18 X 1&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |8<br /> |00197028<br /> |KEY-1/4&quot; X 1 1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |00158001-16<br /> |CHAIN-ROLLER-#35<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |PT0031<br /> |LINK-CONNECTING-#35<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |PT0418<br /> |COLLAR-SHAFT-1&quot;<br /> |<br /> |<br /> |10<br /> |}<br /> [[File:BE-TS Powered Rollers Detail A.png|alt=BE-TS Powered Rollers Detail A|frameless|542x542px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0120<br /> |MOTOR-HYDRAULIC-160CC<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW1071<br /> |KEY-WOODRUFF-#808 STD<br /> |<br /> |''Supplied with Item 1''<br /> |A/R<br /> |-<br /> |3<br /> |H1544<br /> |ADAPTER-#6 JICM X #10 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |18<br /> |-<br /> |5<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |18<br /> |-<br /> |6<br /> |43017004<br /> |PLATE-MOTOR MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |PT0302-1<br /> |COUPLING BODY-#40 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |PT0301<br /> |CHAIN-COUPLING-#40<br /> |<br /> |''Includes connecting pin''<br /> |2<br /> |-<br /> |9<br /> |00197026<br /> |KEY-1/4&quot; X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43097003<br /> |KEY-1/4&quot; X 5/8&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Hose Carrier&lt;/big&gt;&lt;/u&gt;''' ===<br /> [[File:BE-TS Hose Carrier.png|alt=BE-TS Hose Carrier|frameless|550x550px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PT0629<br /> |CARRIER TRACK<br /> |<br /> |''81 links required''<br /> |10'<br /> |-<br /> |2<br /> |PT0631<br /> |BRACKET-UPPER MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0212<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0032<br /> |NUT-NILN-#10-24<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |PT0630<br /> |BRACKET-LOWER MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |7<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |43817056-2<br /> |BRACKET-CARRIER TRACK MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |HW0401<br /> |BOLT-HHCS-3/8-16 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |14<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |43817057<br /> |PLATE-CARRIER TRACK SUPPORT<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === &lt;big&gt;'''&lt;u&gt;Cable Retractor&lt;/u&gt;'''&lt;/big&gt; ===<br /> [[File:BE-TS Cable Retractor.png|alt=BE-TS Cable Retractor|frameless|585x585px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |CCR-12HD<br /> |TAKE UP REEL-CARRIER TRACK<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Operator Gate&lt;/big&gt;&lt;/u&gt;''' ===<br /> [[File:BE-TS Discontinued Drop Bar Operator Gate.png|alt=BE-TS Discontinued Drop Bar Operator Gate|frameless|568x568px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43015004<br /> |GATE-OPERATOR<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0407<br /> |BOLT-HHCS-3/8-16 X 2 3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |<br /> |<br /> |1<br /> |}<br /> [[File:BE-TS Operator Gate Continued.png|alt=BE-TS Operator Gate Continued|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43017064-2<br /> |LATCH-SWING GATE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0418<br /> |BOLT-HHCS-3/8-16 X 2 1/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0031<br /> |NUT-LOCK-3/8-16<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |N/A<br /> |HINGE-SPRING<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |5<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |HW1037<br /> |STOP-GATE<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0003<br /> |NUT-NILN-1/4-20<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |N/A<br /> |TORSION SPRING<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |11<br /> |HW0816<br /> |SCREW-HHCS-SELF DRILLING-#10 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |43806001<br /> |ANTI-FATIGUE MAT<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |43017058-2<br /> |THRESHOLD<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |HW0107<br /> |WASHER-LOCK3/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |HW9002<br /> |GAS SPRING<br /> |80292015<br /> |<br /> |1<br /> |-<br /> |19<br /> |43017086-2<br /> |BRACKET-MOUNTING-SPRING<br /> |80292015<br /> |<br /> |2<br /> |-<br /> |20<br /> |HW0815<br /> |SCREW-SELF DRILLING-#12-24 X 1&quot; T-4<br /> |80292015<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Part Discontinued. Spring Hinge and Torsion Spring must be replaced with Gas Spring Kit.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Guarding&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Outer Carriage Guards&lt;/big&gt;''''' ====<br /> <br /> ===== '''''1-Piece Outside Frame Guarding''''' =====<br /> [[File:BE-TS Outside Frame Guard 1-Piece.png|alt=BE-TS Outside Frame Guard 1-Piece|frameless|550x550px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817038<br /> |GUARD-FAR END-TOP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817037<br /> |GUARD-FAR END-MIDDLE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43817035<br /> |GUARD-FAR END-BOTTOM<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |33<br /> |}<br /> <br /> ===== '''''Split Outside Frame Guarding''''' =====<br /> [[File:BE-TS Outside Split Frame Guard.png|alt=BE-TS Outside Split Frame Guard|frameless|562x562px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817103<br /> |GUARD-FAR END-TOP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817102<br /> |GUARD-FAR END-MIDDLE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43817101<br /> |GUARD-FAR END-BOTTOM<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |37<br /> |}<br /> <br /> ==== '''&lt;big&gt;''Inner Carriage Guards''&lt;/big&gt;''' ====<br /> <br /> ===== '''''Inner Carriage Guards (Rotary Actuator)''''' =====<br /> [[File:BE-TS Inner Carriage Guard Rotary.png|alt=BE-TS Inner Carriage Guard (Rotary Actuator Units)|frameless|554x554px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817041-2<br /> |GUARD-FRONT-OPERATOR CONSOLE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817042-2<br /> |GUARD-INNER-FRAME<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |43014006-2<br /> |GUARD-LINEAR DRIVE SCREW<br /> |<br /> |<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |4<br /> |43017010-2<br /> |GUARD-SIDE-ARM CARRIER SHAFT<br /> |<br /> |<br /> |2<br /> |-<br /> |44517002-2<br /> |GUARD-SIDE-ARM CARRIER SHAFT<br /> |<br /> |''† Single compartment units only''<br /> |1<br /> |-<br /> |5<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |34<br /> |-<br /> |6<br /> |43017009-2<br /> |BRACKET-SCREW GUARD MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Single Compartment Guard replaces standard, Far Side Arm Carrier Shaft Guard.'' <br /> |}<br /> '''''Inner Carriage Guards (Helical Actuator)'''''<br /> <br /> [[File:BE-TS Inner Carriage Guard Helical Actuator.png|alt=BE-TS Inner Carriage Guard (Helical Actuator Units)|frameless|547x547px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817041-2<br /> |GUARD-FRONT-OPERATOR CONSOLE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817042-2<br /> |GUARD-INNER-FRAME<br /> |<br /> |<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |3<br /> |43017081-2<br /> |GUARD-SIDE-ARM CARRIER SHAFT<br /> |<br /> |<br /> |2<br /> |-<br /> |44517003-2<br /> |GUARD-SIDE-ARM CARRIER SHAFT<br /> |<br /> |''† Single compartment units only''<br /> |1<br /> |-<br /> |4<br /> |43017080-2<br /> |BRACKET-SIDE GUARD MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |43017082-3<br /> |MOUNT-CHAIN GUARD-LEAD SCREW<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43017082-4<br /> |MOUNT-CHAIN GUARD-LEAD SCREW<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |43017083-2<br /> |GUARD-CHAIN-LEAD SCREW<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0347<br /> |BOLT-BHSCS-1/4-20 X 3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |28<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Single Compartment Guard replaces standard, Far Side Arm Carrier Shaft Guard.'' <br /> |}<br /> <br /> ==== '''&lt;big&gt;''Dash &amp; Platform Guards''&lt;/big&gt;''' ====<br /> [[File:BE-TS Dash &amp; Platform Guards.png|alt=BE-TS Dash &amp; Platform Guards|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41614004-2<br /> |DASHBOARD-OPERATOR CONSOLE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817040<br /> |KICK PLATE-OPERATOR CONSOLE<br /> |<br /> |''41.5&quot; high''<br /> |1<br /> |-<br /> |3<br /> |43817086-2<br /> |DASHBOARD-OPERATOR CONSOLE<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43817088<br /> |KICK PLATE-OPERATOR CONSOLE<br /> |<br /> |''33.5&quot;'' ''high''<br /> |1<br /> |-<br /> |5<br /> |43817110-2<br /> |FRAME-DASHBOARD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |A/R<br /> |PLATE-DASHBOARD<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |7<br /> |HW0060<br /> |NUT-CLIP-#10-24<br /> |<br /> |<br /> |12<br /> |-<br /> |8<br /> |SS0114<br /> |BHSCS-#10-24 X 1/2&quot;-SST<br /> |<br /> |<br /> |12<br /> |-<br /> |9<br /> |PL0602<br /> |VINYL EDGING<br /> |<br /> |''At Foot Switch (Not shown)'' <br /> |1'<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Consult factory''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Lift Cylinder Guards&lt;/big&gt;''''' ====<br /> [[File:BE-TS Lift Cylinder Guards.png|alt=BE-TS Lift Cylinder Guards|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;2&quot; |1<br /> |43815016<br /> |GUARD-CLEVIS<br /> |<br /> |Operator right / Far left<br /> |2<br /> |-<br /> |43815017<br /> |GUARD-CLEVIS<br /> |<br /> |Operator left / Far right<br /> |2<br /> |-<br /> |2<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Labels &amp; Placards&lt;/big&gt;&lt;/u&gt;''' ===<br /> [[File:BE-TS Labels &amp; Placards Chassis.png|alt=BE-TS Labels &amp; Placards Chassis|frameless|546x546px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |00196616<br /> |LABEL-&quot;NO RIDERS ALLOWED&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |00196210<br /> |LABEL-WARNING-&quot;OPERATION BY AUTHORIZED PERSONNEL ONLY&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43696001<br /> |PLACARD-OFF / ON<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43096018<br /> |PLACARD-RACK LEVEL ASSIST<br /> |<br /> |''† If equipped''<br /> |1<br /> |-<br /> |5<br /> |43096015<br /> |PLACARD-PLATFORM RAISE / LOWER<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43096010<br /> |PLACARD-HORN<br /> |<br /> |''† If equipped''<br /> |1<br /> |-<br /> |7<br /> |43096016<br /> |PLACARD-DRIVE / ARM ROTATION<br /> |<br /> |<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |8<br /> |43096012<br /> |PLACARD-VACUUM OFF / ON<br /> |<br /> |''Vacuum units only''<br /> |1<br /> |-<br /> |43096011<br /> |PLACARD-MAGNET OFF / ON<br /> |<br /> |''Magnet units only (Not shown)''<br /> |1<br /> |-<br /> |9<br /> |43096017<br /> |PLACARD-POWERED ROLLER CUTOUT OVERRIDE<br /> |<br /> |''† If equipped''<br /> |1<br /> |-<br /> |10<br /> |43096013<br /> |PLACARD-POWERED ROLLERS / ARM TRAVERSE<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |00196633<br /> |LABEL-NOTICE-&quot;IN LINE VACUUM FILTER...&quot;<br /> |<br /> |''(1) per side (Vacuum units only)''<br /> |2<br /> |-<br /> |12<br /> |SM-1197<br /> |LABEL-ARM POSITION ARROW<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |00196609<br /> |LABEL-NOTICE-&quot;ARM MUST BE POSITIONED BETWEEN ARROWS...&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |00196602<br /> |LABEL-NOTICE-&quot;LUBRICATION POINTS ON UNDERSIDE&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |00196218<br /> |LABEL-WARNING-&quot;ELECTRICAL VOLTAGE HAZARD&quot;<br /> |<br /> |''Magnet units only''<br /> |1<br /> |-<br /> |16<br /> |00196238<br /> |LABEL-WARNING-&quot;STRONG MAGNETIC<br /> <br /> FIELD/DO NOT USE WITH PACEMAKER&quot;<br /> |<br /> |''†† Magnet units only''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Rack Level Assist (LAI), Horn and Powered Roller Cutout (PRC) are optional features. Not all units are equipped with these options.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Pacemaker Warning Label takes the place of the discontinued, Triangular Magnetic Field Label.''<br /> |}<br /> [[File:BE-TS Labels &amp; Placards Frame.png|alt=BE-TS Labels &amp; Placards Frame|frameless|549x549px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |00196004<br /> |LABEL-CAUTION-&quot;WATCH FOR BATTERY AND CHARGER CABLES IN TRAVEL PATH&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |00196216<br /> |LABEL-WARNING-&quot;CHAIN ENTANGLEMENT<br /> <br /> HAZARD&quot;<br /> |<br /> |''(1) per Clevis Guard'' <br /> |4<br /> |-<br /> |3<br /> |00196622<br /> |LABEL-LIFT POINT<br /> |<br /> |''(2) each end''<br /> |4<br /> |-<br /> |4<br /> |00196700<br /> |DECAL-BHS-24&quot; X 7.875&quot;<br /> |<br /> |''Far end (Not shown)''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |5<br /> |00196630<br /> |LABEL-NOTICE-HYD. OIL SPEC. (AW 68)<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |00196645<br /> |LABEL-NOTICE-HYD. OIL SPEC. (AW 32)<br /> |<br /> |''† See notes'' <br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |† Most units shipped prior to December 2014 require AW 68 Hydraulic Oil. Some units shipped prior to December 2014 shipped with AW 32 for low temperature applications.<br /> |}<br /> <br /> == &lt;big&gt;Extractor Arm&lt;/big&gt; ==<br /> {| class=&quot;wikitable&quot;<br /> !SYMBOL<br /> !DESCRIPTION / NOTICE<br /> !ACTUATOR DIAGRAM<br /> |-<br /> |[[File:IOP-400 BE-SL&amp;DS (10-23) Rotary Actuator Symbol.png|alt=Rotary Actuator Symbol|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Rotary_Actuator_Symbol.png]]<br /> |<br /> ==='''&lt;u&gt;&lt;big&gt;Rotary Actuator Symbol&lt;/big&gt;&lt;/u&gt;'''===<br /> Battery Extractors shipped prior to May 2020 are equipped with Rotary Actuator Extractor Arms. Parts Diagrams Specific to the Rotary Actuator design are indicated with the Rotary Actuator symbol.<br /> |[[File:IOP-400 BE-SL&amp;DS (10-23) Rotary Actuator Extractor Arm.png|alt=BE-TS Rotary Actuator|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Rotary_Actuator_Extractor_Arm.png]]<br /> |-<br /> |[[File:IOP-400 BE-SL&amp;DS (10-23) Helical Actuator Symbol.png|alt=Helical Actuator Symbol|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Helical_Actuator_Symbol.png]]<br /> |<br /> ===&lt;big&gt;'''&lt;u&gt;Helical Actuator Symbol&lt;/u&gt;'''&lt;/big&gt;===<br /> Battery Extractors shipped from May 2020 to Present are equipped with Helical Actuator Extractor Arms. Parts Diagrams Specific to the Rotary Actuator design are indicated with the Helical Actuator Symbol.<br /> |[[File:IOP-400 BE-SL&amp;DS (10-23) Helical Actuator Extractor Arm.png|alt=BE-TS Helical Actuator|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Helical_Actuator_Extractor_Arm.png]]<br /> |}<br /> ===&lt;big&gt;&lt;u&gt;Vacuum Components &amp; Swing Arms&lt;/u&gt;&lt;/big&gt;===<br /> ====''&lt;big&gt;Vacuum Arms (Rotary Actuator)&lt;/big&gt;''====<br /> [[File:BE-TS Vacuum Arms (Rotary Actuator).png|alt=BE-TS Vacuum Arms (Rotary Actuator)|frameless|619x619px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;2&quot; |1<br /> |N/A<br /> |ARM-PUSH/PULL-30&quot;<br /> |<br /> |''&lt;sup&gt;†&lt;/sup&gt; Discontinued''<br /> |1<br /> |-<br /> |N/A<br /> |ARM-PUSH/PULL-36&quot;<br /> |<br /> |''&lt;sup&gt;†&lt;/sup&gt; Discontinued''<br /> |1<br /> |-<br /> |2<br /> |HW0509<br /> |BOLT-HHCS-1/2-13 X 4 1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |P0505<br /> |BUSHING-RED-#6 NPT X #4 FNPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |P0402<br /> |HOSE BARB-1/4 X #4 MNPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0428<br /> |STUD-VACUUM-3/8-16 X 5&quot;<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |9<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |HW-KIT-2<br /> |<br /> |40<br /> |-<br /> |10<br /> |HW1001<br /> |SPRING-3/8&quot;<br /> |HW-KIT-2<br /> |<br /> |24<br /> |-<br /> |11<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |12<br /> |HW0424<br /> |NUT-JAM-3/8-16<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |REF<br /> |43052006<br /> |ADJUSTABLE PUSH/PULL ARM<br /> |<br /> |''Includes Items 13 through 17''<br /> |1<br /> |-<br /> |13<br /> |43057034<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |43055008<br /> |VACUUM CUP MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''&lt;sup&gt;†&lt;/sup&gt; One-piece Arms no longer available. Must replace with Adjustable Arm.''<br /> |}<br /> <br /> ====&lt;big&gt;''Vacuum Cups''&lt;/big&gt;====<br /> [[File:BE-TS Vacuum Cups.png|alt=Vacuum Cups|frameless|563x563px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;4&quot; |A/R<br /> |00162004<br /> |VACUUM CUP-10&quot; 3-PC (STANDARD)<br /> |<br /> |''&lt;sup&gt;†&lt;/sup&gt; Includes Items 1 through 4''<br /> | rowspan=&quot;4&quot; |A/R<br /> |-<br /> |00162003<br /> |VACUUM CUP-12&quot; 3-PC (STANDARD)<br /> |<br /> |''&lt;sup&gt;†&lt;/sup&gt; Includes Items 4 through 7''<br /> |-<br /> |00162007<br /> |VACUUM CUP-10&quot; 3-PC, REINFORCED<br /> |<br /> |''Includes Items 1,3,4 &amp; 8''<br /> |-<br /> |00162005<br /> |VACUUM CUP-12&quot; 3-PC, REINFORCED<br /> |<br /> |''Includes Items 4,5,7 &amp; 9''<br /> |-<br /> |1<br /> |00164006<br /> |CASTING-10&quot; VACUUM CUP<br /> |<br /> | rowspan=&quot;3&quot; |''10&quot; cup only''<br /> |1<br /> |-<br /> |2<br /> |00164004<br /> |SEAL-RUBBER-10&quot;<br /> |<br /> |1<br /> |-<br /> |3<br /> |00165002<br /> |PLATE-FRONT-10&quot;<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0311<br /> |BOLT-FHSCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |00166001<br /> |CASTING-12&quot; VACUUM CUP<br /> |<br /> | rowspan=&quot;3&quot; |''12&quot; cup only''<br /> |1<br /> |-<br /> |6<br /> |00164001<br /> |SEAL-RUBBER-12&quot;<br /> |<br /> |1<br /> |-<br /> |7<br /> |00165001<br /> |PLATE-FRONT-12&quot;<br /> |<br /> |1<br /> |-<br /> |8<br /> |00164007<br /> |SEAL-RUBBER-10&quot;-REINFORCED<br /> |<br /> |<br /> |A/R<br /> |-<br /> |9<br /> |00167003<br /> |SEAL-RUBBER-12&quot;-REINFORCED<br /> |<br /> |<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''&lt;sup&gt;†&lt;/sup&gt; 10&quot; and 12&quot; 1-Piece Cups no longer available. Must replace with 3-Piece Cup. Verify required cup size prior to ordering.''<br /> |}<br /> <br /> ====&lt;big&gt;''Swing Arms (Rotary Actuator)''&lt;/big&gt;====<br /> [[File:BE-TS Swing Arms (Rotary Actuator).png|alt=BE-TS Swing Arms (Rotary Actuator)|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> |ITEM<br /> |BHS PART NUMBER<br /> |DESCRIPTION<br /> |REF. KIT NO.<br /> |NOTES<br /> |NO. REQ<br /> |-<br /> | rowspan=&quot;3&quot; |1<br /> |45055001<br /> |TIE PLATE-SWING ARM<br /> |<br /> |BE-24-2-TS<br /> |1<br /> |-<br /> |45255001<br /> |TIE PLATE-SWING ARM<br /> |<br /> |BE-36-2-TS (NOT SHOWN)<br /> |1<br /> |-<br /> |45355001<br /> |TIE PLATE-SWING ARM<br /> |<br /> |BE-42-2-TS (NOT SHOWN)<br /> |1<br /> |-<br /> |2<br /> |43055004<br /> |SWING ARM-RHS<br /> |†<br /> |NOT SOLD INDIVIDUALLY<br /> |1<br /> |-<br /> |3<br /> |43055002<br /> |SWING ARM-LHS<br /> |†<br /> |NOT SOLD INDIVIDUALLY<br /> |1<br /> |-<br /> |4<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0113<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0010<br /> |NUT-JAM-5/8-11<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |PT0413<br /> |COLLAR-SHAFT-3&quot;<br /> |80252001<br /> |<br /> |2<br /> |-<br /> |8<br /> |43027001<br /> |SHAFT-ROTARY ACTUATOR<br /> |80252001<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW1013<br /> |KEY-3/8&quot; X 12&quot;<br /> |80252001<br /> |<br /> |1<br /> |-<br /> |10<br /> |PT0419<br /> |BEARING-SAE 841-2&quot; I.D., 3&quot; OD, 1/8&quot; THICK<br /> |80252001<br /> |<br /> |3<br /> |-<br /> |11<br /> |43052005<br /> |CAP-BEARING<br /> |<br /> |INCLUDES BEARING<br /> |2<br /> |-<br /> |12<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |13<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |14<br /> |43057014<br /> |STANDOFF-WIRE<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |HW0312<br /> |SCREW-SHSS-1/4-20 X 1&quot;-CUP POINT<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |43057003<br /> |CUSHION-SWING ARM<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |43055001<br /> |STOP-SWING ARM<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |20<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |21<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |H1565<br /> |ADAPTER-45 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |23<br /> |H1600<br /> |ADAPTER-90 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |&lt;sup&gt;†&lt;/sup&gt; ''Included in multiple kits.''<br /> |-<br /> | colspan=&quot;6&quot; |See ''Single Compartment Swing Arm Stop for the the Single Compartment Swing Arm Stop.''<br /> |}<br /> <br /> === '''''Vacuum Swing Arm Stop (Rotary Actuator)''''' ===<br /> [[File:BE-TS Single Compartment Swing Arms (Rotary Actuator).png|alt=BE-TS Single Compartment Swing Arms (Rotary Actuator)|frameless|575x575px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |44555001<br /> |STOP-SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43057003<br /> |CUSHION-SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43057008<br /> |SPACER-SWING ARM STOP<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |}<br /> ====''&lt;big&gt;Vacuum Pump (Rotary Actuator)&lt;/big&gt;''====<br /> [[File:BE-TS Vacuum Pumps (Rotary Actuator).png|alt=BE-TS Vacuum Pumps (Rotary Actuator)|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |P0005<br /> |PUMP-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |P0208<br /> |FILTER-HI FLOW<br /> |<br /> |<br /> |3<br /> |-<br /> |3<br /> |P0503<br /> |NIPPLE-#4 NPT-BRASS<br /> |<br /> |<br /> |3<br /> |-<br /> |4<br /> |P0502<br /> |TEE-#4 FNPT-BRASS<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |P0506<br /> |ELBOW-STR-90 DEG-#4 NPT-BRASS<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |P0402<br /> |HOSE BARB-1/4 X #4 NPTM-BRASS<br /> |<br /> |<br /> |6<br /> |-<br /> |7<br /> |P0207<br /> |VALVE-VACUUM RELEASE<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |P0302<br /> |HOSE-VACUUM-1/4&quot; I.D.<br /> |<br /> |''Two 6&quot; pieces''<br /> |1'<br /> |-<br /> |9<br /> |P0302<br /> |HOSE-VACUUM-1/4&quot; I.D.<br /> |<br /> |''Short Arm side''<br /> |1'<br /> |-<br /> |10<br /> |P0302<br /> |HOSE-VACUUM-1/4&quot; I.D.<br /> |<br /> |''Long Arm side''<br /> |2'<br /> |-<br /> |11<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |HW0212<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |E0624<br /> |CONNECTOR-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |15a<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |''Not shown''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |16<br /> |E0501<br /> |CORD-14-4 SW/SOW<br /> |<br /> |''Withtout Ground Connection in Arm''<br /> | rowspan=&quot;2&quot; |15'<br /> |-<br /> |E0514<br /> |CORD-16-5 SW/SOW<br /> |<br /> |<br /> |-<br /> |17<br /> |43057014<br /> |STANDOFF-CABLE<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |HW0206<br /> |SCREW-RHMS-#10-32 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |19<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |20<br /> |43057021<br /> |PLATE-STIFFENER<br /> |†<br /> |<br /> |2<br /> |-<br /> |21<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |†<br /> |<br /> |12<br /> |-<br /> |22<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |†<br /> |<br /> |12<br /> |-<br /> |23<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |†<br /> |<br /> |12<br /> |-<br /> |24<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |†<br /> |''Not shown''<br /> |24<br /> |-<br /> |25<br /> |P0111<br /> |FILTER-VACUUM-INLINE<br /> |<br /> |''Not shown''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |&lt;sup&gt;†&lt;/sup&gt; ''Included in multiple kits.''<br /> |}<br /> ===&lt;u&gt;&lt;big&gt;Rotary Actuator&lt;/big&gt;&lt;/u&gt;===<br /> [[File:BE-TS Rotary Actuator.png|alt=BE-TS Rotary Actuator|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43046001<br /> |ROTARY ACTUATOR<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |80000002<br /> |ROTARY ACTUATOR BASE ASSEMBLY<br /> |<br /> |''Without Actuator''<br /> |1<br /> |-<br /> |2A<br /> |N/A<br /> |VERTICAL CARRIER PLATE-OUTER<br /> |<br /> |''Included with 80000002''<br /> |2<br /> |-<br /> |2B<br /> |N/A<br /> |VERTICAL CARRIER PLATE-INNER<br /> |<br /> |''Included with 80000002''<br /> |1<br /> |-<br /> |2C<br /> |N/A<br /> |CARRIER BASE PLATE<br /> |<br /> |''Included with 80000002''<br /> |1<br /> |-<br /> |3<br /> |HW1070<br /> |PIN-PULL DOWEL-5/8&quot; X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0508<br /> |BOLT-SHCS-1/2-13 X 3/4&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW1045<br /> |PIN-PULL DOWEL-3/8&quot; X 1 1/2&quot;<br /> |<br /> |''Included with 80000002''<br /> |6<br /> |-<br /> |6<br /> |HW0412<br /> |BOLT-SHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |''Included with 80000002''<br /> |12<br /> |-<br /> |7<br /> |H0010<br /> |FITTING-BULKHEAD-3/4-16 X #4 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 NPTM<br /> |<br /> |<br /> |2<br /> |}<br /> ===&lt;u&gt;&lt;big&gt;Carrier Shafts &amp; Bearings ''(Rotary Actuator)''&lt;/big&gt;&lt;/u&gt;===<br /> [[File:BE-TS Rotary Actuator Carrier Shafts.png|alt=BE-TS Carrier Shafts (Rotary Actuator)|frameless|560x560px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43057045<br /> |CARRIER SHAFT-EXTRACTOR ARM<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |2<br /> |43054007<br /> |BEARING-EXTRACTOR ARM CARRIER<br /> |80252002<br /> |''†† See notes''<br /> |4<br /> |-<br /> |3<br /> |HW0412<br /> |BOLT-SHCS-3/8-16 X 1 1/4&quot;<br /> |80252002<br /> |<br /> |16<br /> |-<br /> |4<br /> |PT0413<br /> |COLLAR-SHAFT-3&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |PT0624<br /> |FITTING-ZERK<br /> |80252002<br /> |''Not shown''<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† See Vacuum Extended Reach section for Extended Reach equipped units.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Carrier Shafts &amp; Bearings (Helical Actuator) section for Helical Actuator equipped units.''<br /> |}<br /> <br /> ===&lt;u&gt;&lt;big&gt;Drive Screw Components ''(Rotary Actuator)''&lt;/big&gt;&lt;/u&gt;===<br /> ====''&lt;big&gt;Drive Nut Assembly (Rotary Actuator)&lt;/big&gt;''====<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Drive Nut Assembly Rotary Actuator.png|alt=BE-SL&amp;DS Drive Nut Assembly Rotary Actuator|frameless|537x537px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Drive_Nut_Assembly_Rotary_Actuator.png]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43054006<br /> |DRIVE NUT ASSEMBLY<br /> |80252003<br /> |&lt;sup&gt;''†''&lt;/sup&gt; ''See notes''<br /> |1<br /> |-<br /> |2<br /> |HW0426<br /> |BOLT-SHCS-3/8-16 X 5 1/2&quot;<br /> |80252003<br /> |&lt;sup&gt;''††''&lt;/sup&gt; ''See notes''<br /> |4<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |80252003<br /> |&lt;sup&gt;''††''&lt;/sup&gt; ''See notes''<br /> |4<br /> |-<br /> |4<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |80252003<br /> |&lt;sup&gt;''††''&lt;/sup&gt; ''See notes''<br /> |4<br /> |-<br /> |5<br /> |PT0624<br /> |FITTING-ZERK<br /> |80252003<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''&lt;sup&gt;†&lt;/sup&gt; See Drive Screw Components (Helical Actuator) section for Helical Actuator equipped units.''<br /> |-<br /> | colspan=&quot;6&quot; |''&lt;sup&gt;††&lt;/sup&gt; It is recommended to replace mounting hardware when replacing Drive Nut Assembly.''<br /> |}<br /> ====''&lt;big&gt;Drive Screw&lt;/big&gt;''====<br /> =====''[Current] Drive Screw Assembly (Frame #'s 374 to Present)''=====<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Drive Screw Rotary Current.png|alt=Current BE-SL &amp; BE-DS Drive Screw (Rotary Actuator)|frameless|531x531px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Drive_Screw_Rotary_Current.png]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43024001<br /> |SCREW-LINEAR DRIVE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |PT0119<br /> |SPROCKET-50B15 X 1 3/16&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43097004<br /> |KEY-1/4 X 7/8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |00158001-15<br /> |CHAIN-ROLLER-#50<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |PT0102<br /> |LINK-CONNECTING-#50<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |PT0406<br /> |FLANGE BEARING-4 BOLT-1 3/16&quot;<br /> |<br /> |''Alloy casting''<br /> |2<br /> |-<br /> |7<br /> |HW0503<br /> |BOLT-HHCS-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |PT0107<br /> |SPROCKET-50B15 X 1&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HC0121<br /> |MOTOR-HYDRAULIC-100CC<br /> |<br /> |''SAE 2-Bolt mount''<br /> |1<br /> |-<br /> |11<br /> |H1605<br /> |ADAPTER-90 DEG-#6 JICM X #10 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW1071<br /> |KEY-WOODRUFF-#808 STD<br /> |<br /> |''Supplied with Item 10''<br /> |A/R<br /> |-<br /> |13<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |14<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |15<br /> |43017007<br /> |PLATE-MOUNTING-SCREW DRIVE MOTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |43057019<br /> |PLATE-COVER<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0415<br /> |BOLT-SHCS-3/8-16 X 3/4&quot;<br /> |<br /> |<br /> |8<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> ! colspan=&quot;6&quot; |ITEMS BELOW ARE REQUIRED FOR REPLACING THE LINEAR DRIVE<br /> SCREW ON UNITS WITH FRAME #'S OF 373 AND EARLIER<br /> |-<br /> ! colspan=&quot;6&quot; |LINEAR DRIVE SCREW UPDATE KIT<br /> |-<br /> |REF<br /> |80252011<br /> |UPGRADE KIT<br /> |<br /> |<br /> |1<br /> |-<br /> |1<br /> |43024001<br /> |SCREW-LINEAR DRIVE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |PT0119<br /> |SPROCKET-50B15 X 1 3/16&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43097004<br /> |KEY-1/4 X 7/8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |PT0406<br /> |FLANGE BEARING-4 BOLT-1 3/16&quot;<br /> |<br /> |''Alloy casting''<br /> |2<br /> |-<br /> |7<br /> |HW0503<br /> |BOLT-HHCS-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |16<br /> |43057019<br /> |PLATE-COVER<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |43057022<br /> |SHIM-18GA<br /> |<br /> |''May not be required (Not shown)''<br /> |2<br /> |-<br /> |19<br /> |43057018<br /> |TEMPLATE-BEARING MOUNT PATTERN<br /> |<br /> |''Not shown''<br /> |1<br /> |-<br /> |20<br /> |80000015<br /> |INSTRUCTION DETAIL<br /> |<br /> |''Not shown''<br /> |REF<br /> |-<br /> |21<br /> |43057020<br /> |SPACER PLATE<br /> |<br /> |''Not shown''<br /> |2<br /> |}<br /> =====''[Discontinued] Drive Screw Assembly (Frame #'s 373 and Earlier)''=====<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Drive Screw (Rotary Actuator) Discontinued.png|alt=Discontinued BE-SL &amp; BE-DS Drive Screw (Rotary Actuator)|frameless|532x532px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Drive_Screw_(Rotary_Actuator)_Discontinued.png]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |SCREW-LINEAR DRIVE (DISCONTINUED)<br /> |<br /> |''See 80252011 Upgrade Kit''<br /> |1<br /> |-<br /> |2<br /> |PT0118<br /> |SPROCKET-50B12 X 1 3/16&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43097004<br /> |KEY-1/4&quot; X 7/8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |00158001-15<br /> |CHAIN-ROLLER-#50<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |PT0102<br /> |LINK-CONNECTING-#50<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43057016<br /> |BLOCK-BEARING RETAINER<br /> |<br /> |<br /> |2<br /> |-<br /> |6a<br /> |PT0414<br /> |RACE-TAPERED ROLLER BEARING<br /> |<br /> |''Included with 43057016''<br /> |2<br /> |-<br /> |7<br /> |PT0623<br /> |SEAL-GREASE<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0416<br /> |BOLT-SHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |PT0415<br /> |BEARING-TAPERED ROLLER<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW1050<br /> |NUT-LOCK<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |43057017<br /> |PLATE-COVER<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0415<br /> |BOLT-SHCS-3/8-16 X 3/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |13<br /> |PT0624<br /> |FITTING-ZERK<br /> |<br /> |<br /> |2<br /> |}<br /> ===&lt;big&gt;&lt;u&gt;Hose Carrier Plate&lt;/u&gt;&lt;/big&gt;===<br /> [[File:BE-TS Hose Carrier Plate.png|alt=BE-TS Hose Carrier Plate|frameless|554x554px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43915018<br /> |PLATE-HOSE CARRIER<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |PT0618<br /> |BRACKET-FIXED END<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |PT0617<br /> |HOSE CARRIER<br /> |<br /> |''20 links required''<br /> |3 FT<br /> |-<br /> |5<br /> |PT0619<br /> |BRACKET-MOVING END<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |9<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |10<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HC0262<br /> |VALVE-CROSS PORT RELIEF<br /> |<br /> |''Includes cartridges''<br /> |1<br /> |-<br /> |12a<br /> |43846002<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''†† For Item 12 (Not shown)''<br /> |2<br /> |-<br /> |13<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |H1560<br /> |ADAPTER-45 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |E1329<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |''PVC - Includes cover''<br /> |1<br /> |-<br /> |19<br /> |HW0212<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |20<br /> |HW0102<br /> |WASHER-FLAT-#10-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |21<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |22<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |23<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |''For Items 21 &amp; 22 (Not shown)''<br /> |3<br /> |-<br /> |24<br /> |HW1076<br /> |BOLT-FHSCS-3/8-16 X 1&quot;<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Units built prior to February 2014 without extended reach option use (4) HW0403 mounting bolts.''<br /> <br /> ''†† Cartridges are for replacement only.''<br /> |}<br /> <br /> === &lt;big&gt;'''&lt;u&gt;Magnet Components ''(Rotary Actuator)''&lt;/u&gt;'''&lt;/big&gt; ===<br /> <br /> ==== '''''&lt;big&gt;[Discontinued] Magnet Arm Configuration&lt;/big&gt;''''' ====<br /> [[File:BE-TS (Discontinued) Magnet Arm Configuration.png|alt=BE-TS (Discontinued) Magnet Arm Configuration|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41257014<br /> |TIE PLATE-SWING ARM<br /> |<br /> |''All units''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |41655008<br /> |EXTENSION-ARM<br /> |<br /> |''BE-36 only (Not shown)''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |43455001<br /> |EXTENSION-ARM<br /> |<br /> |''BE-42 only (Not shown)''<br /> |1<br /> |-<br /> |2<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0113<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0010<br /> |NUT-JAM-5/8-11<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |41655001<br /> |CARRIER TUBE-MAGNET SWING SHAFT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |7<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |9<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |6<br /> |-<br /> |10<br /> |41657006<br /> |SHAFT-MAGNET SWING<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |41698001<br /> |KEY-3/8&quot; X 7/16&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |N/A<br /> |STOP-MAGNET SWING<br /> |<br /> |''† Dicontinued''<br /> |1<br /> |-<br /> |13<br /> |PT0430<br /> |FLANGE BEARING-4 BOLT-1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |HW0513<br /> |BOLT-HHCS-1/2-13 X 2 1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |15<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |16<br /> |-<br /> |16<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |17<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |-<br /> |18<br /> |41655002<br /> |PLATE-MAGNET MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |41257015<br /> |BLOCK-TIGHTENER<br /> |<br /> |''2-piece item''<br /> |1<br /> |-<br /> |20<br /> |41257016<br /> |BLOCK-FIXED<br /> |<br /> |''2-piece item''<br /> |1<br /> |-<br /> |21<br /> |HW0423<br /> |BOLT-SHCS-3/8-16 X 3 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0806<br /> |SET SCREW-3/8-16 X 2&quot;<br /> |<br /> |''Replaces Swivel Head''<br /> |4<br /> |-<br /> |24<br /> |HW0424<br /> |NUT-JAM-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |25<br /> |41657017<br /> |INSULATOR-MAGNET MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |26<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |27<br /> |41657008<br /> |PAD-MAGNET SLIDE<br /> |<br /> |<br /> |2<br /> |-<br /> |28<br /> |HW0314<br /> |BOLT-FHSCS-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Refer to [Current] Magnet Arm Configuration (Rotary Actuator) section for replacement / upgrade parts.''<br /> |}<br /> <br /> ==== '''&lt;big&gt;''[Current] Magnet Arm Configuration (Rotary Actuator)''&lt;/big&gt;''' ====<br /> [[File:BE-TS (Current) Magnet Arm Configuration.png|alt=BE-TS (Current) Magnet Arm Configuration|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |80252012<br /> |MAGNET SWING STOP KIT<br /> |<br /> |''Includes Items 1 through 6''<br /> |A/R<br /> |-<br /> |1<br /> |43057029<br /> |PLATE-STOP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43058003<br /> |SLEEVE-STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |43057030<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |PL0501<br /> |GROMMET-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0509<br /> |BOLT-HHCS-1/2-13 X 4 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |44557003<br /> |PLATE-STOP<br /> |<br /> |''† Single compartment units only''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† For units equipped with Pivot Shaft. See [Current] Magnet Arm Configuration (Rotary Actuator) for units with Independent Magnet Pivot Bearings.'' <br /> |}<br /> '''&lt;big&gt;''Magnet Pivot Stop (Rotary Actuator)''&lt;/big&gt;'''<br /> <br /> [[File:BE-TS Magnet Pivot Stop.png|alt=BE-TS Magnet Pivot Stop|frameless|547x547px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |MAGNET PUSH/PULL ARM<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |43055010<br /> |MAGNET MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |PT0470<br /> |BEARING-MAGNET PIVOT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0525<br /> |BOLT-CARRIAGE-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |5<br /> |HW0524<br /> |BOLT-CARRIAGE-1/2-13 X 2&quot;<br /> |<br /> |''†† Stop Plate location''<br /> |4<br /> |-<br /> |6<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |7<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |16<br /> |-<br /> |8<br /> |43058009<br /> |PLATE-ROTATION STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |43058003<br /> |SLEEVE-STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43058010<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |PL0501<br /> |GROMMET-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |43057037<br /> |INSULATOR-BOTTOM<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |16<br /> |41657008<br /> |SLIDE-MAGNET<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0314<br /> |BOLT-FHSCS-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |44558001<br /> |PLATE-ROTATION STOP<br /> |<br /> |''†† Single compartment units only''<br /> |2<br /> |-<br /> |REF<br /> |43052014<br /> |ADJUSTABLE PUSH-PULL ARM<br /> |<br /> |''Includes Items 19-23''<br /> |A/R<br /> |-<br /> |19<br /> |43055018<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |20<br /> |43055019<br /> |MAGNET MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |21<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |22<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† 1-Piece Arm no longer available. Must be replaced with Adjustable Arm.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Single compartment Stop Plates require (1) additional 2&quot; long Carriage Bolt each''<br /> |}<br /> <br /> ==== &lt;big&gt;''Magnet Mounting Hardware (Rotary Actuator)''&lt;/big&gt; ====<br /> [[File:BE-TS Magnet Mounting Hardware (Rotary Actuator).png|alt=BE-TS Magnet Mounting Hardware (Rotary Actuator)|frameless|554x554px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43032009<br /> |MAGNET ASSEMBLY<br /> |<br /> |''Includes Items 1 through 12''<br /> |A/R<br /> |-<br /> |1<br /> |N/A<br /> |ELECTROMAGNET-95VDC<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |E0314<br /> |SENSOR-PROXIMITY-30MM<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |N/A<br /> |GASKET-REAR<br /> |<br /> |''Discontinued - Not used''<br /> |2<br /> |-<br /> |4<br /> |41657002<br /> |COVER-PROXIMITY SENSOR HOUSING<br /> |<br /> |''Rear''<br /> |2<br /> |-<br /> |5<br /> |HW1065<br /> |SCREW-SHCS-#6-32 X 3/8&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |6<br /> |HW1066<br /> |WASHER-LOCK-#6<br /> |<br /> |<br /> |8<br /> |-<br /> |7<br /> |E0376<br /> |INDICATOR LIGHT<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |8<br /> |E0335<br /> |RECEPTACLE-5 PIN MALE<br /> |<br /> |''With 12&quot; lead''<br /> |2<br /> |-<br /> |9<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |N/A<br /> |GASKET-FRONT<br /> |<br /> |''Discontinued - Not used''<br /> |2<br /> |-<br /> |11<br /> |41657003<br /> |COVER-PROXIMITY SENSOR HOUSING<br /> |80252015<br /> |''Front''<br /> |2<br /> |-<br /> |12<br /> |HW0138<br /> |SCREW-FHSCS-#8-32 X 3/8&quot;<br /> |80252015<br /> |<br /> |8<br /> |-<br /> |13<br /> |HW0433<br /> |STUD-1/2-13 X 5&quot;<br /> |80252006<br /> | rowspan=&quot;5&quot; |''For units with Magnet Pivot Shaft only.'' <br /> <br /> ''See [Discontinued] Magnet Arm Configuration for units built prior to 11/01/14''<br /> |8<br /> |-<br /> |14<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |80252006<br /> |8<br /> |-<br /> |15<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |80252006<br /> |40<br /> |-<br /> |16<br /> |HW1002<br /> |SPRING-1/2&quot;<br /> |80252006<br /> |24<br /> |-<br /> |17<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |80252006<br /> |8<br /> |-<br /> |18<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |80252014<br /> | rowspan=&quot;4&quot; |''For units with independent Pivot Bearings only.'' <br /> <br /> ''See [Current] Magnet Arm Configuration for units built 11/01/14 to present)''<br /> |4<br /> |-<br /> |19<br /> |HW1002<br /> |SPRING-1/2&quot;<br /> |80252014<br /> |4<br /> |-<br /> |20<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |80252014<br /> |8<br /> |-<br /> |21<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |80252014<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Extractors built or replacement magnets shipped prior to October 2021 used multi-piece indicator lights with replaceable bulb and lens and are no longer available. Current indicator light is a 1-piece LED assembly. Replacement of any multi-piece component requires replacing entire assembly with current, 1-piece indicator light.''<br /> |}<br /> <br /> === '''''Magnet Cords (Rotary Actuator)''''' ===<br /> [[File:BE-TS Magnet Cords.png|alt=BE-TS Magnet Cords|frameless|555x555px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1105<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |''Weather proof box''<br /> |1<br /> |-<br /> |2<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |E1106<br /> |COVER-JUNCTION BOX<br /> |<br /> |''Weather proof with gasket'' <br /> |1<br /> |-<br /> |4<br /> |E0333<br /> |RECEPTACLE-9 PIN MALE<br /> |<br /> |''With 12&quot; lead''<br /> |1<br /> |-<br /> |5<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |6<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |7<br /> |E0334<br /> |CORD-5 PIN FEMALE<br /> |<br /> |''With 36&quot; lead''<br /> |2<br /> |-<br /> |8<br /> |E0332<br /> |CORD-9 PIN FEMALE-90 DEG<br /> |<br /> |''With 36&quot; lead''<br /> |1<br /> |-<br /> |9<br /> |PL0501<br /> |GROMMET-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |41657013-2<br /> |PLATE-PANEL MOUNTING<br /> |<br /> |''With single cable hole''<br /> |1<br /> |-<br /> |11<br /> |E0334-6<br /> |CORD-5 PIN FEMALE<br /> |<br /> |''With 72&quot; lead''<br /> |2<br /> |-<br /> |12<br /> |43057038-2<br /> |PLATE-PANEL MOUNTING<br /> |<br /> |''With dual cable holes''<br /> |1<br /> |}<br /> '''''&lt;big&gt;Magnet Panel Mounting (Rotary Actuator)&lt;/big&gt;'''''<br /> <br /> [[File:BE-TS Panel Mounting (Rotary Actuator).png|alt=BE-TS Panel Mounting (Rotary Actuator)|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43057021<br /> |PLATE-STIFFENER<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |''Not shown''<br /> |24<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |5<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |12<br /> |-<br /> |6<br /> |41637001<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0325<br /> |BOLT-5/16-18 X 1 3/4&quot;-PAN HEAD<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |N/A<br /> |INSULATOR-THREADED FEMALE<br /> |<br /> |''Discontinued''<br /> |4<br /> |-<br /> |9<br /> |HW0106<br /> |WASHER-FLAT-5/16&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0326<br /> |NUT-NILN-5/16-18<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |E1016<br /> |FUSE HOLDER<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |E0325<br /> |FUSE-7AMP-250VAC<br /> |<br /> |''FLM-7 or FNM-7''<br /> |1<br /> |-<br /> |16<br /> |PL0307<br /> |INSULATOR-MALE STUD<br /> |<br /> |<br /> |4<br /> |}<br /> '''''&lt;big&gt;Magnet Extractor Electrical Panel (Rotary Actuator)&lt;/big&gt;'''''<br /> <br /> [[File:BE-TS Magnet Extractor Electrical Panel (Rotary Actuator).png|alt=BE-TS Magnet Extractor Electrical Panel (Rotary Actuator)|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41637001<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41637002<br /> |WIRE WAY<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |41637003<br /> |WIRE WAY<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |41637004<br /> |TRACK-TERMINAL BLOCK MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |41637005<br /> |TRACK-TERMINAL BLOCK MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |7<br /> |HW0132<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |<br /> |10<br /> |-<br /> |8<br /> |HW0133<br /> |NUT-NILN-#8-32<br /> |<br /> |''Not shown''<br /> |16<br /> |-<br /> |9<br /> |E1020<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |12<br /> |-<br /> |10<br /> |E1040<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |E1330<br /> |END ANCHOR<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |E1009<br /> |RECTIFIER-FULL WAVE BRIDGE<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |HW0135<br /> |SCREW-RHMS-#8-32 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |E1313<br /> |SOCKET-RELAY-8 PIN<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0139<br /> |SCREW-RHMS-#8-32 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |E0331<br /> |RELAY-DPDT-110VAC<br /> |<br /> |''with Indicator Light''<br /> |2<br /> |}<br /> <br /> === &lt;big&gt;'''&lt;u&gt;Swing Arm Stop (Rotary Actuator)&lt;/u&gt;'''&lt;/big&gt; ===<br /> [[File:BE-TS Swing Arm Stop (Rotary Actuator).png|alt=BE-TS Swing Arm Stop (Rotary Actuator)|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055007<br /> |MOUNT-STOP-SWING ARM<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |2<br /> |43057024<br /> |STOP-SWING ARM<br /> |<br /> |''BE-24''<br /> |4<br /> |-<br /> |43057023<br /> |STOP-SWING ARM<br /> |<br /> |''BE-36 &amp; BE-42''<br /> |4<br /> |-<br /> |3<br /> |HW0304<br /> |BOLT-HHCS-1/4-20 X 1 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† See Vacuum Swing Arm Stop (Rotary Actuator) section for single compartment stop mount and stop.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Extended Reach (Rotary Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Vacuum Extended Reach (Rotary Actuator).png|alt=BE-TS Vacuum Extended Reach (Rotary Actuator)|frameless|536x536px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41257014<br /> |TIE PLATE-SWING ARM<br /> |<br /> |''All units''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |41655008<br /> |EXTENSION-ARM<br /> |<br /> |''BE-36 only (Not shown)''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |43455001<br /> |EXTENSION-ARM<br /> |<br /> |''BE-42 only (Not shown)''<br /> |1<br /> |-<br /> |2<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |P0301-1<br /> |HOSE-COIL-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |41257035<br /> |STANDOFF<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW1072<br /> |RESTRAINT-HOSE<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0318<br /> |BOLT-SHCS-1/4-20 X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |HW0312<br /> |SCREW-SHSS-1/4-20 X 1&quot;-CUP POINT<br /> |<br /> |<br /> |1<br /> |}<br /> [[File:BE-TS Vacuum Extended Reach (Rotary Actuator) 2.png|alt=BE-TS Vacuum Extended Reach (Rotary Actuator)|frameless|547x547px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41255005<br /> |ARM-EXTENSION-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0416<br /> |CYLINDER-EXTENDED REACH-VACUUM<br /> |<br /> |''2 1/2&quot; X 12&quot; Cylinder''<br /> |1<br /> |-<br /> |3<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JICM X #6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |41257031<br /> |PIN-CLEVIS END<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |00197036<br /> |PIN-ROD END<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1058<br /> |PIN-HITCH<br /> |<br /> |<br /> |4<br /> |}<br /> [[File:BE-TS Vacuum Extended Reach (Rotary Actuator) 3.png|alt=BE-TS Vacuum Extended Reach (Rotary Actuator) 3|frameless|541x541px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41255004<br /> |HOUSING-EXTENDED REACH-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41257030<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |41258002<br /> |PLATE-BEARING<br /> |80258001<br /> |''Side''<br /> |2<br /> |-<br /> |8<br /> |41258005<br /> |PLATE-SHIM<br /> |80258001<br /> |''Side''<br /> |2<br /> |-<br /> |9<br /> |41258003<br /> |PLATE-BEARING<br /> |80258001<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |10<br /> |41258004<br /> |PLATE-SHIM<br /> |80258001<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |11<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |28<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |28<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Extended Reach (Rotary Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Extended Reach Rotary Actuator.png|alt=BE-TS Extended Reach Rotary Actuator|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43046001<br /> |ROTARY ACTUATOR<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |80000002<br /> |ROTARY ACTUATOR BASE ASSEMBLY<br /> |<br /> |''Without Actuator''<br /> |1<br /> |-<br /> |2A<br /> |N/A<br /> |VERTICAL CARRIER PLATE-OUTER<br /> |<br /> |''Included with 80000002''<br /> |2<br /> |-<br /> |2B<br /> |N/A<br /> |VERTICAL CARRIER PLATE-INNER<br /> |<br /> |''Included with 80000002''<br /> |1<br /> |-<br /> |2C<br /> |N/A<br /> |CARRIER BASE PLATE<br /> |<br /> |''Included with 80000002''<br /> |1<br /> |-<br /> |3<br /> |HW1070<br /> |PIN-PULL DOWEL-5/8&quot; X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0508<br /> |BOLT-SHCS-1/2-13 X 3/4&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW1045<br /> |PIN-PULL DOWEL-3/8&quot; X 1 1/2&quot;<br /> |<br /> |''Included with 80000002''<br /> |6<br /> |-<br /> |6<br /> |HW0412<br /> |BOLT-SHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |''Included with 80000002''<br /> |12<br /> |-<br /> |7<br /> |H0010<br /> |FITTING-BULKHEAD-3/4-16 X #4 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |4<br /> |}<br /> [[File:BE-TS Extended Reach Rotary Actuator 2.png|alt=BE-TS Extended Reach Rotary Actuator |frameless|535x535px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PT0634<br /> |BRACKET-MALE END<br /> |<br /> |''Sols as a set''<br /> |1<br /> |-<br /> |2<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |10<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |PT0627<br /> |HOSE CARRIER<br /> |<br /> |''14 links required''<br /> |39&quot;<br /> |-<br /> |7<br /> |PT0634<br /> |BRACKET-FEMALE END<br /> |<br /> |''Sols as a set''<br /> |1<br /> |-<br /> |8<br /> |HC0262<br /> |VALVE-CROSS PORT RELIEF<br /> |<br /> |<br /> |1<br /> |-<br /> |8a<br /> |43046003<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''† For Item 8 (Not shown)''<br /> |2<br /> |-<br /> |9<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |H1546<br /> |ADAPTER-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |H1617<br /> |ADAPTER-45 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HC0237<br /> |VALVE-SEQUENCING<br /> |<br /> |<br /> |1<br /> |-<br /> |12a<br /> |43046005<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''† For Item 12 (Not shown)''<br /> |A/R<br /> |-<br /> |13<br /> |HW0317<br /> |BOLT-HHCS-1/4-20 X 3 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |H1560<br /> |ADAPTER-45 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |H1600<br /> |ADAPTER-90 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Cartridges are for replacement only''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Extended Reach (Rotary Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Extended Reach (Rotary Actuator).png|alt=BE-TS Magnet Extended Reach (Rotary Actuator)|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055011<br /> |ARM-EXTENSION-MAGNET<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0415<br /> |CYLINDER-EXTENDED REACH-MAGNET<br /> |<br /> |''2 1/2&quot; X 8&quot; Cylinder''<br /> |1<br /> |-<br /> |3<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JICM X #6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CLEVIS END<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-ROD END<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-EXTERNAL-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW1043<br /> |CLAMP-CYLINDER<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |43057044-2<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |43058019<br /> |SUPPORT-CABLE-BAND CLAMP<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> [[File:BE-TS Magnet Extended Reach (Rotary Actuator) 2.png|alt=BE-TS Magnet Extended Reach (Rotary Actuator) |frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055012<br /> |HOUSING-EXTENDED REACH-MAGNET<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |43058013<br /> |PLATE-BEARING-SIDE<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |43058016<br /> |PLATE-SHIM-SIDE<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |43058014<br /> |PLATE-BEARING-UPPER/LOWER<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43058015<br /> |PLATE-SHIM-UPPER/LOWER<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |24<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |24<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Extended Reach End Plate&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Extended Reach End Plate.png|alt=BE-TS Extended Reach End Plate|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |CARRIER SHAFT-EXTRACTOR ARM<br /> |<br /> |''† 3-Hole version''<br /> |A/R<br /> |-<br /> |2<br /> |PT0413<br /> |COLLAR-SHAFT-3&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |50057009<br /> |PLATE-END-3 HOLE<br /> |<br /> |''Replacement part only''<br /> |4<br /> |-<br /> |4<br /> |50057010<br /> |SHIM-END PLATE<br /> |<br /> |''†† See notes''<br /> |A/R<br /> |-<br /> |5<br /> |HW1076<br /> |BOLT-FHSCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |6<br /> |43057045<br /> |CARRIER SHAFT-EXTRACTOR ARM<br /> |<br /> |''1-Hole version''<br /> |2<br /> |-<br /> |7<br /> |43017076<br /> |PLATE-END-1 HOLE<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† 3-Hole Carrier Shaft no longer available. Must replace 3-Hole shaft with current, 1-Hole version along with new ennd plates &amp; hardware.'' <br /> |-<br /> | colspan=&quot;6&quot; |''†† Shim quantity varies due to manufacturing tolerances.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Carrier Shafts &amp; Bearings&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Carrier Shafts &amp; Bearings (Helical Actuator).png|alt=BE-TS Carrier Shafts &amp; Bearings (Helical Actuator)|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43057045<br /> |CARRIER SHAFT-EXTRACTOR ARM<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |2<br /> |43054007<br /> |BEARING-EXTRACTOR ARM CARRIER<br /> |80252002<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0412<br /> |BOLT-SHCS-3/8-16 X 1 1/4&quot;<br /> |80252002<br /> |<br /> |16<br /> |-<br /> |4<br /> |PT0413<br /> |COLLAR-SHAFT-3&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |50057010<br /> |SHIM-END PLATE<br /> |<br /> |<br /> |A/R<br /> |-<br /> |6<br /> |43017076<br /> |PLATE-END-1 HOLE<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |PT0624<br /> |FITTING-ZERK<br /> |80252002<br /> |''Not shown''<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† See Extended Reach End Plate section for Extended Reach equipped units.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Drive Nut Assembly (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Drive Nut Assembly (Helical Actuator).png|alt=BE-TS Drive Nut Assembly (Helical Actuator)|frameless|600x600px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43054006<br /> |DRIVE NUT ASSEMBLY<br /> |80252003<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0426<br /> |BOLT-SHCS-3/8-16 X 5 1/2&quot;<br /> |80252003<br /> |''† See notes''<br /> |4<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |80252003<br /> |''† See notes''<br /> |4<br /> |-<br /> |4<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |80252003<br /> |''† See notes''<br /> |4<br /> |-<br /> |5<br /> |PT0624<br /> |FITTING-ZERK<br /> |80252003<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† It is recommended to replce mounting hardware when replacing Drive Nut Assembly.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Swing Arms &amp; Actuator (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;[Discontinued] Helical Actuator&lt;/big&gt;''''' ====<br /> [[File:BE-TS Swing Arms &amp; Actuator (Helical Actuator).png|alt=BE-TS [Discontinued] Swing Arms &amp; Actuator (Helical Actuator)|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |HELICAL ACTUATOR<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |43057046<br /> |ACTUATOR BASE PLATE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43058022<br /> |SPACER-ACTUATOR<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0725<br /> |BOLT-HHCS-3/4-16 X 4-3/4&quot;-GR8<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0066<br /> |NUT-JAM-3/4-16-GR8<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43055013<br /> |SWING ARM-LHS<br /> |<br /> | rowspan=&quot;6&quot; |''†† See notes''<br /> |1<br /> |-<br /> |7<br /> |HW0620<br /> |BOLT-HHCS-5/8-11 X 1-1/4&quot;<br /> |<br /> |6<br /> |-<br /> |8<br /> |HW0013<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |6<br /> |-<br /> |9<br /> |43055014<br /> |SWING ARM-RHS<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1-1/4&quot;<br /> |<br /> |6<br /> |-<br /> |11<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |6<br /> |-<br /> |12<br /> |43042008<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |43042010<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE, LONG<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |H1619<br /> |ADAPTER-90 DEG-#6 JICM X #4 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |H0010<br /> |FITTING-H-BULKHEAD-1/4 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |H1504<br /> |ADAPTER-#6 JICM X #4 NPTM<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW1082<br /> |CLAMP-HOSE<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Discontinued Helical Actuator no longer available. Must replace with current Helical Actuator Retro Kit 80252032. See [Current] Helical Actuator.'' <br /> <br /> ''†† Swing arms manufactured prior to January 2022 use 10 bolts &amp; washers per Swing Arm.'' <br /> |}<br /> <br /> ==== '''''&lt;big&gt;[Current] Helical Actuator&lt;/big&gt;''''' ====<br /> [[File:BE-TS (Current) Swing Arms &amp; Actuator (Helical Actuator).png|alt=BE-TS (Current) Swing Arms &amp; Actuator (Helical Actuator)|frameless|544x544px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |N/A<br /> |43052020<br /> |HELICAL ACTUATOR ASSEMBLY<br /> |<br /> |''Includes Items 1 through 17''<br /> |1<br /> |-<br /> |1<br /> |HC0180<br /> |HELICAL ACTUATOR<br /> |80252032<br /> |<br /> |1<br /> |-<br /> |2<br /> |43057046<br /> |ACTUATOR BASE PLATE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43058022<br /> |SPACER-ACTUATOR<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0725<br /> |BOLT-HHCS-3/4-16 X 4-3/4&quot;-GR8<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0066<br /> |NUT-JAM-3/4-16-GR8<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43055013<br /> |SWING ARM-LHS<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0620<br /> |BOLT-HHCS-5/8-11 X 1-1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |8<br /> |HW0013<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |9<br /> |43055014<br /> |SWING ARM-RHS<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1-1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |11<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |12<br /> |43042011<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE, 90 DEG<br /> |80252032<br /> |''† See notes''<br /> |1<br /> |-<br /> |13<br /> |43042012<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE, SHORT<br /> |80252032<br /> |''† See notes''<br /> |1<br /> |-<br /> |14<br /> |H1619<br /> |ADAPTER-90 DEG-#6 JICM X #4 SAEM<br /> |80252032<br /> |<br /> |2<br /> |-<br /> |15<br /> |H0010<br /> |FITTING-H-BULKHEAD-1/4 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |H1504<br /> |ADAPTER-#6 JICM X #4 NPTM<br /> |80252032<br /> |<br /> |1<br /> |-<br /> |17<br /> |H1691<br /> |ADAPTER-45 DEG-#6 JICM X #4 NPTM<br /> |80252032<br /> |''† See notes''<br /> |1<br /> |-<br /> |18<br /> |HW1082<br /> |CLAMP-HOSE<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Hard-Pipes and 45 degree adapter required if replacing discontinued actuator with current Actuator Kit Part # 80252032 required for discontinued actuator replacement.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Swing Arm Stops &amp; Tie Plate&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Swing Arm Stops &amp; Tie Plate (Helical Actuator).png|alt=BE-TS Swing Arm Stops &amp; Tie Plate (Helical Actuator)|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43057050<br /> |TIE PLATE-HELICAL SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0113<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0010<br /> |NUT-JAM-5/8-11<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |43057052<br /> |STOP-POLY-SWING ARM<br /> |<br /> |''† See notes''<br /> |4<br /> |-<br /> |6<br /> |HW0441<br /> |BOLT-FHSCS-3/8-16 X 1-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW0031<br /> |NUT-LOCK-3/8-16, DEFORMED THREAD<br /> |<br /> |''† † See notes''<br /> |4<br /> |-<br /> |8<br /> |44555002<br /> |SWING ARM STOP<br /> |<br /> |''Single compartment use only''<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Replacement Poly Stop design updated from Square to Round. Stop Spacers not required with current, Round-Style Stops.''<br /> |-<br /> | colspan=&quot;6&quot; |''† † Deformed Thread Lock Nut replaces Acorn Nut and Split Lock Washer used previously.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Push/Pull Arm Mounting (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Push-Pull Arm Mounting.png|alt=BE-TS Push-Pull Arm Mounting (Helical Actuator)|frameless|542x542px]]<br /> {| class=&quot;wikitable&quot;<br /> ! rowspan=&quot;2&quot; |ITEM<br /> ! rowspan=&quot;2&quot; |BHS PART NUMBER<br /> ! rowspan=&quot;2&quot; |DESCRIPTION<br /> ! rowspan=&quot;2&quot; |REF. KIT NO.<br /> ! rowspan=&quot;2&quot; |NOTES<br /> ! colspan=&quot;3&quot; |NO. REQ<br /> |-<br /> !BE-24<br /> !BE-36<br /> !BE-42<br /> |-<br /> | rowspan=&quot;2&quot; |1<br /> |41655008<br /> |EXTENSION-ARM<br /> |<br /> |''†BE-36 units only''<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |1<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |43455001<br /> |EXTENSION-ARM<br /> |<br /> |''†BE-42 units only''<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |1<br /> |-<br /> |2<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> | colspan=&quot;2&quot; |12<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |12<br /> | colspan=&quot;2&quot; |24<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> | colspan=&quot;2&quot; |12<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |6<br /> | colspan=&quot;2&quot; |12<br /> |-<br /> ! colspan=&quot;8&quot; |NOTES<br /> |-<br /> | colspan=&quot;8&quot; |''† BE-24 units do not utilize an Arm Extension.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Extractor Arm (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Non-Pivoting Vacuum Cup Arm (Helical Actuator)&lt;/big&gt;''''' ====<br /> [[File:BE-TS Non-Pivoting Vacuum Cup Arm (Helical Actuator).png|alt=BE-TS Non-Pivoting Vacuum Cup Arm (Helical Actuator)|frameless|578x578px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0428<br /> |STUD-VACUUM-3/8-16 X 5&quot;<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |2<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |HW-KIT-2<br /> |<br /> |40<br /> |-<br /> |3<br /> |HW1001<br /> |SPRING-3/8&quot;<br /> |HW-KIT-2<br /> |<br /> |24<br /> |-<br /> |4<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0424<br /> |NUT-JAM-3/8-16<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |6<br /> |P0402<br /> |HOSE BARB-1/4&quot; X #4 MNPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |REF<br /> |43052014<br /> |ADJUSTABLE PUSH-PULL ARM<br /> |<br /> |''Includes Items 7 through 11''<br /> |A/R<br /> |-<br /> |7<br /> |43055018<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |43055019<br /> |VACUUM CUP MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Pivoting Vacuum Cup Arm (Helical Actuator)&lt;/big&gt;''''' ====<br /> [[File:BE-TS Pivoting Vacuum Cup Arm (Helical Actuator).png|alt=BE-TS Pivoting Vacuum Cup Arm (Helical Actuator)|frameless|525x525px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43052014<br /> |ADJUSTABLE PUSH-PULL ARM<br /> |<br /> |''Includes Items 1 through 5''<br /> |A/R<br /> |-<br /> |1<br /> |43055018<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43055019<br /> |VACUUM CUP MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |43055020<br /> |MOUNT-PIVOT-VACUUM CUP<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |PT0470<br /> |BEARING-PIVOT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0525<br /> |BOLT-CARRIAGE-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |9<br /> |HW0524<br /> |BOLT-CARRIAGE-1/2-13 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |11<br /> |HW0008<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |16<br /> |-<br /> |12<br /> |43058009<br /> |PLATE-ROTATION STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |43058003<br /> |SLEEVE-STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |43058010<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |4<br /> |-<br /> |16<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |43037002-2<br /> |SUPPORT-CABLE RESTRAINT<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |21<br /> |P0506<br /> |ELBOW-STR-90 DEG-#4 NPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |22<br /> |P0402<br /> |HOSE BARB-1/4&quot; X #4 MNPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |23<br /> |43057056-2<br /> |BRACKET-HOSE SUPPORT<br /> |<br /> |<br /> |2<br /> |-<br /> |24<br /> |PL0507<br /> |GROMMET-5/8&quot; I.D.<br /> |<br /> |<br /> |2<br /> |-<br /> |25<br /> |P0302<br /> |HOSE-VACUUM-1/4&quot; I.D.<br /> |<br /> |''2 pieces at 48&quot; each''<br /> |96&quot;<br /> |-<br /> |26<br /> |HW0443<br /> |BOLT-HHCS-3/8-16 X 3-1/2&quot;<br /> |HW-KIT-3<br /> |<br /> |8<br /> |-<br /> |27<br /> |HW1001<br /> |SPRING-3/8&quot;<br /> |HW-KIT-3<br /> |<br /> |16<br /> |-<br /> |28<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |HW-KIT-3<br /> |<br /> |32<br /> |-<br /> |29<br /> |HW0424<br /> |NUT-JAM-3/8-16<br /> |HW-KIT-3<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Cup Rotation Stop (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Vacuum Cup Rotation Stop (Helical Actuator).png|alt=BE-TS Vacuum Cup Rotation Stop (Helical Actuator)|frameless|583x583px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |445558001<br /> |PLATE-ROTATION STOP<br /> |<br /> |''† Single compartment units only''<br /> |2<br /> |-<br /> |2<br /> |HW0525<br /> |BOLT-CARRIAGE-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0524<br /> |BOLT-CARRIAGE-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0008<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Components (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Vacuum Components (Helical Actuator).png|alt=BE-TS Vacuum Components (Helical Actuator)|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43058021<br /> |STIFFENER PLATE-HELICAL SWING ARM<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |24<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |5<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |12<br /> |-<br /> |6<br /> |P0005<br /> |PUMP-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |P0207<br /> |VALVE-VACUUM RELEASE<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |P0208<br /> |FILTER-HI FLOW<br /> |<br /> |<br /> |3<br /> |-<br /> |9<br /> |H0011<br /> |NIPPLE-#4 X 2&quot;-BRASS<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |P0502<br /> |TEE-#4 FNPT-BRASS<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |P0506<br /> |ELBOW-STR-90 DEG-#4 NPT-BRASS<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |P0503<br /> |NIPPLE-#4 NPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |P0402<br /> |HOSE BARB-1/4&quot; X #4 MNPT-BRASS<br /> |<br /> |<br /> |6<br /> |-<br /> |14<br /> |P0111<br /> |FILTER-VACUUM-IN-LINE<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0206<br /> |SCREW-RHMS-#10-32 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |43037014-2<br /> |BRACKET-CABLE RESTRAINT<br /> |<br /> |<br /> |1<br /> |-<br /> |17<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |18<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |21<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |22<br /> |E0624<br /> |CONNECTOR-1/2&quot;<br /> |<br /> |''Includes Lock Nut''<br /> |1<br /> |-<br /> |23<br /> |HW0212<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Arm (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Arm (Helical Actuator).png|alt=BE-TS Magnet Arm (Helical Actuator)|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43052014<br /> |ADJUSTABLE PUSH-PULL ARM<br /> |<br /> |''Includes Items 1 through 5''<br /> |A/R<br /> |-<br /> |1<br /> |43055018<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43055019<br /> |VACUUM CUP MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |43055016<br /> |MOUNT-PIVOT-MAGNET<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |PT0470<br /> |BEARING-PIVOT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0525<br /> |BOLT-CARRIAGE-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |9<br /> |HW0524<br /> |BOLT-CARRIAGE-1/2-13 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |11<br /> |HW0008<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |16<br /> |-<br /> |12<br /> |43058009<br /> |PLATE-ROTATION STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |43058003<br /> |SLEEVE-STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |43058010<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |18<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |43037002-2<br /> |SUPPORT-CABLE RESTRAINT<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |21<br /> |E0334-6'<br /> |CORD-5 PIN FEMALE<br /> |<br /> |''With 72&quot; lead''<br /> |2<br /> |-<br /> |22<br /> |E1041<br /> |WIRE LOOM-SPIRAL-3/8&quot;<br /> |<br /> |''2 pieces at 24&quot; each''<br /> |48&quot;<br /> |-<br /> |23<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |2<br /> |-<br /> |24<br /> |43057037<br /> |INSULATOR-BOTTOM<br /> |<br /> |<br /> |2<br /> |-<br /> |25<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |26<br /> |41657008<br /> |SLIDE-MAGNET<br /> |<br /> |<br /> |2<br /> |-<br /> |27<br /> |HW0314<br /> |BOLT-FHSCS-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Assembly (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Assembly (Helical Actuator).png|alt=BE-TS Magnet Assembly (Helical Actuator)|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43032009<br /> |MAGNET ASSEMBLY<br /> |<br /> |''Includes Items 1 through 12''<br /> |A/R<br /> |-<br /> |1<br /> |N/A<br /> |ELECTROMAGNET-95VDC<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |E0314<br /> |SENSOR-PROXIMITY-30MM<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |41657002<br /> |COVER-PROXIMITY SENSOR HOUSING<br /> |<br /> |''Rear''<br /> |2<br /> |-<br /> |4<br /> |HW1065<br /> |SCREW-SHCS-#6-32 X 3/8&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW1066<br /> |WASHER-LOCK-#6<br /> |<br /> |<br /> |8<br /> |-<br /> |6<br /> |E0335<br /> |RECEPTACLE-5 PIN MALE<br /> |<br /> |''With 12&quot; lead''<br /> |2<br /> |-<br /> |7<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |E0376<br /> |INDICATOR LIGHT<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |9<br /> |41657003<br /> |COVER-PROXIMITY SENSOR HOUSING<br /> |80252015<br /> |''Front''<br /> |2<br /> |-<br /> |10<br /> |HW0138<br /> |SCREW-FHSCS-#8-32 X 3/8&quot;<br /> |80252015<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |80252014<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW1002<br /> |SPRING-1/2&quot;<br /> |80252014<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |80252014<br /> |<br /> |8<br /> |-<br /> |14<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |80252014<br /> |<br /> |4<br /> |-<br /> |15<br /> |E0336<br /> |METAL OXIDE VARISTOR<br /> |<br /> |''Not shown''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Extractors built or replacement magnets shipped prior to October 2021 used Multi-Piece Indicator Lights with replaceable bulb and lens and are no longer available. Current Indicator Light is a 1-Piece LED assembly. Replacement of any Multi-Piece component requires replacing entire assembly with current, 1-Piece Indicator Light.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Components (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Components (Helical Actuator).png|alt=BE-TS Magnet Components (Helical Actuator)|frameless|534x534px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43058021<br /> |STIFFENER PLATE-HELICAL SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43057051-2<br /> |STIFFENER-MAGNET-HELICAL SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |4<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |24<br /> |-<br /> |5<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |6<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |12<br /> |-<br /> |7<br /> |PL0307<br /> |INSULATOR-MALE STUD<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0106<br /> |WASHER-FLAT-5/16&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |HW0105<br /> |WASHER-LOCK-5/16&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0004<br /> |NUT-HEX-5/16-18<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |12<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |13<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |14<br /> |E1016<br /> |FUSE HOLDER<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |E0325<br /> |FUSE-7 AMP-250VAC<br /> |<br /> |''FLM-7 or FNM-7''<br /> |1<br /> |-<br /> |16<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |17<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Panel (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Panel (Helical Actuator).png|alt=BE-TS Magnet Panel (Helical Actuator)|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41637001<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41637002<br /> |WIRE WAY-SHORT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |41637003<br /> |WIRE WAY-LONG<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |41637004<br /> |TRACK-MOUNTING-SHORT<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |41637005<br /> |TRACK-MOUNTING-LONG<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> | rowspan=&quot;3&quot; |''Mounting track hardware (Not shown)''<br /> |10<br /> |-<br /> |7<br /> |HW0132<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |10<br /> |-<br /> |8<br /> |HW0133<br /> |NUT-NILN-#8-32<br /> |<br /> |16<br /> |-<br /> |9<br /> |E1020<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |12<br /> |-<br /> |10<br /> |E1040<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |E1330<br /> |END ANCHOR<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |E1009<br /> |RECTIFIER-FULL WAVE BRIDGE<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |HW0135<br /> |SCREW-RHMS-#8-32 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |E1313<br /> |SOCKET-RELAY-8 PIN<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |E0331<br /> |RELAY-DPDT-110VAC<br /> |<br /> |''With Indicator Light''<br /> |2<br /> |-<br /> |16<br /> |HW0139<br /> |SCREW-RHMS-#8-32 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Extended Reach Hydraulics (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== &lt;big&gt;''[Discontinued] Helical Actuator''&lt;/big&gt; ====<br /> [[File:BE-TS (Discontinued) Helical Actuator.png|alt=BE-TS (Discontinued) Helical Actuator|frameless|546x546px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43042009<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |H0010<br /> |FITTING-BULKHEAD-3/4-16 X #4 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |43055017<br /> |ELBOW-BULKHEAD<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> | rowspan=&quot;3&quot; |7<br /> |4-48-0402-0402<br /> |HYD HOSE-1/4&quot; X 48&quot; (BE-24 UNITS)<br /> |<br /> | rowspan=&quot;3&quot; |''Cylinder rod-end hose''<br /> | rowspan=&quot;3&quot; |1<br /> |-<br /> |4-54-0402-0402<br /> |HYD HOSE-1/4&quot; X 54&quot; (BE-36 UNITS)<br /> |<br /> |-<br /> |4-56-0402-0402<br /> |HYD HOSE-1/4&quot; X 56&quot; (BE-42 UNITS)<br /> |<br /> |-<br /> | rowspan=&quot;3&quot; |8<br /> |4-38-0402-0402<br /> |HYD HOSE-1/4&quot; X 38&quot; (BE-24 UNITS)<br /> |<br /> | rowspan=&quot;3&quot; |''Cylinder rod-end hose''<br /> | rowspan=&quot;3&quot; |1<br /> |-<br /> |4-44-0402-0402<br /> |HYD HOSE-1/4&quot; X 44&quot; (BE-36 UNITS)<br /> |<br /> |-<br /> |4-46-0402-0402<br /> |HYD HOSE-1/4&quot; X 46&quot; (BE-42 UNITS)<br /> |<br /> |-<br /> |9<br /> |41257035<br /> |STANDOFF-HOSE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW1093<br /> |CLAMP-CABLE-3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0311<br /> |BOLT-FHSCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> ==== &lt;big&gt;''[Current] Helical Actuator''&lt;/big&gt; ====<br /> [[File:BE-TS (Current) Helical Actuator.png|alt=BE-TS (Current) Helical Actuator|frameless|567x567px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43042013<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |H0010<br /> |FITTING-BULKHEAD-3/4-16 X #4 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |43055021<br /> |ELBOW-BULKHEAD<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> | rowspan=&quot;3&quot; |7<br /> |4-48-0402-0402<br /> |HYD HOSE-1/4&quot; X 48&quot; (BE-24 UNITS)<br /> |<br /> | rowspan=&quot;3&quot; |''Cylinder rod-end hose''<br /> | rowspan=&quot;3&quot; |1<br /> |-<br /> |4-54-0402-0402<br /> |HYD HOSE-1/4&quot; X 54&quot; (BE-36 UNITS)<br /> |<br /> |-<br /> |4-56-0402-0402<br /> |HYD HOSE-1/4&quot; X 56&quot; (BE-42 UNITS)<br /> |<br /> |-<br /> | rowspan=&quot;3&quot; |8<br /> |4-38-0402-0402<br /> |HYD HOSE-1/4&quot; X 38&quot; (BE-24 UNITS)<br /> |<br /> | rowspan=&quot;3&quot; |''Cylinder rod-end hose''<br /> | rowspan=&quot;3&quot; |1<br /> |-<br /> |4-44-0402-0402<br /> |HYD HOSE-1/4&quot; X 44&quot; (BE-36 UNITS)<br /> |<br /> |-<br /> |4-46-0402-0402<br /> |HYD HOSE-1/4&quot; X 46&quot; (BE-42 UNITS)<br /> |<br /> |-<br /> |9<br /> |41257035<br /> |STANDOFF-HOSE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW1093<br /> |CLAMP-CABLE-3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0311<br /> |BOLT-FHSCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Extended Reach (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== &lt;big&gt;'''''Non-Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator)'''''&lt;/big&gt; ====<br /> [[File:BE-TS Non-Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator).png|alt=BE-TS Non-Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator)|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41255005<br /> |ARM-EXTENSION<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41255004<br /> |HOUSING-EXTENDED REACH<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0416<br /> |CYLINDER-2 1/2&quot; X 12&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CYLINDER-REAR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-CYLINDER-ROD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JIC X # 6 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |28<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |28<br /> |-<br /> |15<br /> |41258002<br /> |PLATE-BEARING<br /> |80258001<br /> |''Side''<br /> |2<br /> |-<br /> |16<br /> |41258005<br /> |PLATE-SHIM<br /> |80258001<br /> |''Side''<br /> |2<br /> |-<br /> |17<br /> |41258003<br /> |PLATE-BEARING<br /> |80258001<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |18<br /> |41258004<br /> |PLATE-SHIM<br /> |80258001<br /> |''Upper / lower''<br /> |2<br /> |}<br /> &lt;big&gt;'''''Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator)'''''&lt;/big&gt;<br /> <br /> [[File:BE-TS Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator).png|alt=BE-TS Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator)|frameless|553x553px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055011<br /> |ARM-EXTENSION<br /> |<br /> |''Pivoting cup only''<br /> |1<br /> |-<br /> |2<br /> |43055012<br /> |HOUSING-EXTENDED REACH<br /> |<br /> |''Pivoting cup only''<br /> |1<br /> |-<br /> |3<br /> |HC0415<br /> |CYLINDER-2 1/2&quot; X 8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CYLINDER-REAR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-CYLINDER-ROD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JIC X # 6 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |24<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |24<br /> |-<br /> |15<br /> |43058013<br /> |PLATE-BEARING<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |16<br /> |43058016<br /> |PLATE-SHIM<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |17<br /> |43058014<br /> |PLATE-BEARING<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |18<br /> |43058015<br /> |PLATE-SHIM<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |19<br /> |HW1043<br /> |CLAMP-CYLINDER<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |43058019<br /> |SUPPORT-CABLE-BAND CLAMP<br /> |<br /> |<br /> |2<br /> |-<br /> |21<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |22<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |23<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |24<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Extended Reach (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== &lt;big&gt;'''''[Discontinued] Extended Reach Magnet Arm (Helical Actuator)'''''&lt;/big&gt; ====<br /> [[File:BE-TS (Discontinued) Extended Reach Magnet Arm (Helical Actuator).png|alt=BE-TS (Discontinued) Extended Reach Magnet Arm (Helical Actuator)|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055011<br /> |ARM-EXTENSION<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43055012<br /> |HOUSING-EXTENDED REACH<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0415<br /> |CYLINDER-2 1/2&quot; X 8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CYLINDER-REAR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-CYLINDER-ROD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JIC X # 6 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |24<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |24<br /> |-<br /> |15<br /> |43058013<br /> |PLATE-BEARING<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |16<br /> |43058016<br /> |PLATE-SHIM<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |17<br /> |43058014<br /> |PLATE-BEARING<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |18<br /> |43058015<br /> |PLATE-SHIM<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |19<br /> |HW1043<br /> |CLAMP-CYLINDER<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |43058019<br /> |SUPPORT-CABLE-BAND CLAMP<br /> |<br /> |<br /> |2<br /> |-<br /> |21<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |24<br /> |43057004-2<br /> |SUPPORT-CABLE-MAGNET<br /> |<br /> |<br /> |2<br /> |}<br /> &lt;big&gt;'''''[Current] Extended Reach Magnet Arm (Helical Actuator)'''''&lt;/big&gt;<br /> <br /> [[File:BE-TS (Current) Extended Reach Magnet Arm (Helical Actuator).png|alt=BE-TS (Current) Extended Reach Magnet Arm (Helical Actuator)|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |50055004<br /> |ARM-EXTENSION<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |50055005<br /> |HOUSING-EXTENDED REACH<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0415<br /> |CYLINDER-2 1/2&quot; X 8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CYLINDER-REAR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-CYLINDER-ROD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JIC X # 6 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |20<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |20<br /> |-<br /> |15<br /> |50058009<br /> |PLATE-BEARING<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |16<br /> |50058012<br /> |PLATE-SHIM<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |17<br /> |50058010<br /> |PLATE-BEARING<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |18<br /> |50058011<br /> |PLATE-SHIM<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |19<br /> |HW1043<br /> |CLAMP-CYLINDER<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |43058019<br /> |SUPPORT-CABLE-BAND CLAMP<br /> |<br /> |<br /> |2<br /> |-<br /> |21<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |24<br /> |43057004-2<br /> |SUPPORT-CABLE-MAGNET<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> == &lt;big&gt;Drive and Idler Wheels&lt;/big&gt; ==<br /> <br /> === &lt;big&gt;&lt;u&gt;Drive Wheel Mounting&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Drive Wheel Mounting.png|alt=BE-TS Drive Wheel Mounting|frameless|519x519px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0503<br /> |BOLT-HHCS-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |2<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |''Cylinder Bracket bolt only''<br /> |2<br /> |-<br /> |3<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> === &lt;big&gt;&lt;u&gt;'''Drive Wheel Motors'''&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Drive Wheel Motors.png|alt=BE-TS Drive Wheel Motors|frameless|535x535px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;2&quot; |1<br /> |43822001-6B<br /> |FLOOR DRIVE ASSEMBLY (W/ 200CC MOTOR)<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |43822004-6B<br /> |FLOOR DRIVE ASSEMBLY (W/ 400CC MOTOR)<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |2<br /> |43827004<br /> |PLATE-MOTOR MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0416<br /> |BOLT-SHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |H1612<br /> |ADAPTER-90 DEG-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |N/A<br /> |ROD-THREADED-1/2-13 X 7 3/4&quot;<br /> |<br /> |''†† See notes''<br /> |8<br /> |-<br /> |7<br /> |N/A<br /> |SPACER-DRIVE WHEEL-4.75&quot; LG<br /> |<br /> |''†† See notes''<br /> |8<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |43827006<br /> |SPACER-DRIVE WHEEL-4.125&quot; LG<br /> |<br /> |Must be ordered as a set of 4<br /> |8<br /> |-<br /> |11<br /> |HW0516<br /> |BOLT-HHCS-1/2-13 X 6 1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |12<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> | rowspan=&quot;2&quot; |13<br /> |N/A<br /> |MOTOR-HYDRAULIC-200CC<br /> |<br /> |''††† Keyed Shaft''<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |N/A<br /> |MOTOR-HYDRAULIC-400CC<br /> |<br /> |''††† Keyed Shaft''<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |14<br /> |HW1071<br /> |KEY-WOODRUFF-#808 STD<br /> |<br /> |<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |15<br /> |HC0124-6B<br /> |MOTOR-HYDRAULIC-200CC<br /> |<br /> |''† Spline Shaft''<br /> |2<br /> |-<br /> |HC0126-6B<br /> |MOTOR-HYDRAULIC-400CC<br /> |80322003<br /> |''† Spline Shaft''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† 200CC Motors required for units equipped with Parallel Drive Circuit.''<br /> ''400CC Motors required for units equipped with Series Drive Circuit.''<br /> <br /> See Cross Port Relief section to determine if unit is Parallel or Series equipped and approximate effectivity of each type.<br /> |-<br /> | colspan=&quot;6&quot; |''†† Parts obsolete and no longer available. Must replace with Items 10 &amp; 11.''<br /> |-<br /> | colspan=&quot;6&quot; |''††† Parts obsolete and no longer available. Must replace with Spline Drive Conversion Kit.''<br /> |}<br /> <br /> === &lt;big&gt;&lt;u&gt;'''Drive Wheel Bearings'''&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Drive Wheel Bearings.png|alt=BE-TS Drive Wheel Bearings|frameless|537x537px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43825001<br /> |FRAME-FLOOR DRIVE<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |C0510-1<br /> |WHEEL-10&quot; X 5&quot;-POLY<br /> |80322001<br /> |<br /> |2<br /> |-<br /> |3<br /> |43822003<br /> |SHAFT-WHEEL (W/ COUPLING BODY)<br /> |<br /> |''Available in multiple kits''<br /> |2<br /> |-<br /> |4<br /> |43897004<br /> |KEY-3/8&quot; X 4 3/4&quot;<br /> |80322001<br /> |<br /> |2<br /> |-<br /> |5<br /> |PT0430<br /> |FLANGE BEARING-4 BOLT-1 1/2&quot;<br /> |80322001<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |7<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |16<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |9<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |16<br /> |-<br /> |10<br /> |PT0321<br /> |CHAIN-COUPLING-#50<br /> |<br /> |''Includes connecting pin''<br /> |2<br /> |-<br /> |11<br /> |N/A<br /> |COUPLING BODY-TAPER BORE-#50<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |12<br /> |N/A<br /> |BUSHING-TAPER LOCK-1&quot;<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |13<br /> |HW0323<br /> |BOLT-HHCS-5/16-18 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |14<br /> |PT0330<br /> |COUPLING BODY-#50-SPLINE BORE<br /> |80322003<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW1110<br /> |RETAINING RING-1 1/2&quot;-HEAVY DUTY<br /> |<br /> |''†† Available in multiple kits''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Parts obsolete and no longer available. Spline Drive Conversion Kit required. Reuse of bushing after disassembly not recommended.'' <br /> |-<br /> | colspan=&quot;6&quot; |''† † Retaining Rings used on units shipped after 7/01/12. Units shipped from 7/01/13 are equipped with (2) Retaining Rings per shaft - (1) on each side of the wheel. Units shipped after 11/01/13 are equipped with only (1) Snap Rings as shown. Second Snap Ring is no longer used or required.''<br /> |-<br /> | colspan=&quot;6&quot; |''NOTE: Effectivity dates refer to dates new extractor units are shipped from the factory. Replacement part effectivity &lt;u&gt;'''may'''&lt;/u&gt; differ due to factory inventory levels at time of parts order. Consult factory if unsure of parts needed.''<br /> |}<br /> <br /> === &lt;big&gt;&lt;u&gt;'''Drive Wheel Assembly'''&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Drive Wheel Assembly.png|alt=BE-TS Drive Wheel Assembly|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43822005<br /> |RADIAL PISTON DRIVE WHEEL ASSEMBLY<br /> |<br /> |''Includes Items 1 through 6''<br /> |2<br /> |-<br /> |1<br /> |43825003<br /> |RADIAL PISTON DRIVE WHEEL MOUNT<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0160-1<br /> |400CC RADIAL PISTON MOTOR<br /> |<br /> |''Includes nuts &amp; studs''<br /> |1<br /> |-<br /> |REF<br /> |HC0160-STUD<br /> |STUD-M14-1.5 X 46MM<br /> |<br /> |''Replacement motor stud''<br /> |A/R<br /> |-<br /> |REF<br /> |HC0160-NUT<br /> |NUT-FLANGED HEX-M14-1.5<br /> |<br /> |''Replacement motor nut''<br /> |A/R<br /> |-<br /> |3<br /> |C0511<br /> |WHEEL-POLY-10 X 5&quot;-FLANGE MOUNT<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |5<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |6<br /> |-<br /> |7<br /> |H1612<br /> |ADAPTER-H-90 DEG-#10 SAEM X #8 JICM<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |H1539<br /> |ADAPTER-#8 JIC X #6 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1586<br /> |ADAPTER-90 DEG-#8 JICSW X #6 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |H0801<br /> |TEE-H-#6 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H1501<br /> |ADAPTER-#8 JIC X #6 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |H0200<br /> |REDUCER-#6 NPT X #4 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |H0206<br /> |PLUG-#4 NPT<br /> |<br /> |''† Left Drive Wheel only''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Plug used on Left Drive Wheel Assembly only. Hose from Left Drive Wheel Assembly is connected to tee on Right Drive Wheel Assembly.'' <br /> |}<br /> <br /> === &lt;big&gt;&lt;u&gt;'''Idler Casters'''&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Idler Casters.png|alt=BE-TS Idler Casters|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |C0500-1<br /> |CASTER-RIGID-10&quot; X 5&quot;-POLY<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |3<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |<br /> |''For Cylinder Bracket position'' <br /> |2<br /> |-<br /> |4<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |16<br /> |-<br /> |5<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |6<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> == &lt;big&gt;Electrical&lt;/big&gt; ==<br /> <br /> === '''&lt;u&gt;&lt;big&gt;AC Power Stanchion&lt;/big&gt;&lt;/u&gt;''' ===<br /> <br /> ==== '''&lt;big&gt;''Aero-Motive Energy Rail''&lt;/big&gt;''' ====<br /> [[File:BE-TS Aero-Motive Energy Rail.png|alt=BE-TS Aero-Motive Energy Rail|frameless|536x536px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43835001<br /> |STANCHION-POWER<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0511<br /> |BOLT-HHCS-1/2-13 X 3 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |46837014-2<br /> |TOW ARM-COLLECTOR TROLLEY<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |46838015<br /> |SPACER BLOCK-TOW ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW1030<br /> |U-BOLT-3/8-16 X 2&quot; X 5&quot;-SQUARE BEND<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .625&quot; to .750&quot;''<br /> |1<br /> |-<br /> |13<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |HW1051<br /> |EYE BOLT-3/8-16 X 5 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0126<br /> |WASHER-FLAT-3/8&quot;-FENDER<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |BD0010<br /> |TROLLEY-ENERGY RAIL<br /> |<br /> | rowspan=&quot;2&quot; |''Aero-Motive Rail only''<br /> <br /> ''(orange housing color)''<br /> |1<br /> |-<br /> |19<br /> |BD0100<br /> |BRUSH-TROLLEY<br /> |<br /> |4<br /> |}<br /> <br /> ==== '''&lt;big&gt;''Vahle Energy Rail''&lt;/big&gt;''' ====<br /> [[File:BE-TS Vahle Energy Rail.png|alt=BE-TS Vahle Energy Rail|frameless|535x535px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1A<br /> |BD0031<br /> |TROLLEY-ENERGY RAIL, KSL<br /> |<br /> | rowspan=&quot;3&quot; |''† Vahle KSL Rail only''<br /> <br /> ''(green housing color)''<br /> |1<br /> |-<br /> |2A<br /> |BD0040<br /> |BRUSH-PHASE, KSL<br /> |<br /> |3<br /> |-<br /> |3A<br /> |BD0041<br /> |BRUSH-GROUND, KSL<br /> |<br /> |1<br /> |-<br /> |1B<br /> |BD0231<br /> |TROLLEY-ENERGY RAIL, KBH<br /> |<br /> | rowspan=&quot;3&quot; |''† Vahle KBH Rail only''<br /> <br /> ''(gray housing color)''<br /> <br /> ''(Nots shown)''<br /> |1<br /> |-<br /> |2B<br /> |BD0240<br /> |BRUSH-PHASE, KBH<br /> |<br /> |3<br /> |-<br /> |3B<br /> |BD0241<br /> |BRUSH-GROUND, KBH<br /> |<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |4<br /> |BD0030<br /> |TOW ARM-COLLECTOR TROLLEY, KSL<br /> |<br /> |''† Vahle KSL Rail only''<br /> <br /> ''(green housing color)''<br /> |1<br /> |-<br /> |BD0230<br /> |TOW ARM-COLLECTOR TROLLEY, KBH<br /> |<br /> |''† Vahle KBH Rail only''<br /> <br /> ''(gray housing color)''<br /> |1<br /> |-<br /> |5<br /> |46838015<br /> |SPACER-BLOCK-TOW ARM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |6<br /> |41237083-2<br /> |BRACKET-TOW ARM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |7<br /> |HW1054<br /> |U-BOLT-5/16-18 X 2&quot; X 5&quot;-SQUARE BEND<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW0323<br /> |BOLT-HHCS-5/16-18 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0106<br /> |WASHER-FLAT-5/16&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0150<br /> |WASHER-FLAT-5/16&quot;-FENDER<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0105<br /> |WASHER-LOCK-5/16&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0004<br /> |NUT-HEX-5/16-18<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Verify Energy Rail type (KSL OR KBH) by the color of the energy rail housing.'' <br /> |-<br /> | colspan=&quot;6&quot; |''†† Not all units equipped with Tow Arm Bracket. Location of Spacer Block and/or Tow Arm Bracket may vary from configuration shown.'' <br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Control Panel&lt;/big&gt;&lt;/u&gt;''' ===<br /> '''&lt;big&gt;''[Discontinued] Control Panel for Units with 10 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS (Discontinued) Control Panel for Units with 10HP.png|alt=BE-TS (Discontinued) Control Panel for Units with 10HP|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-CONTROL PANEL-16&quot; X 14&quot; X 6&quot;<br /> |<br /> |CONSULT FACTORY<br /> |1<br /> |-<br /> |2<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |Grip size .250&quot; to.375&quot;<br /> |1<br /> |-<br /> |6<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |Grip size .625&quot; to .750&quot;<br /> |2<br /> |-<br /> |7<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |Grip size .500&quot; to .625&quot;<br /> |2<br /> |-<br /> |8<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |''Not shown''<br /> |1<br /> |-<br /> |9<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |''Not shown''<br /> |4<br /> |}<br /> [[File:BE-TS (Discontinued) Control Panel for Units with 10HP Detail.png|alt=BE-TS (Discontinued) Control Panel for Units with 10HP Detail|frameless|556x556px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0640<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |BLANK PANEL WITHOUT HOLES<br /> |1<br /> |-<br /> |2<br /> |E0120<br /> |MAGNETIC STARTER-NEMA 1 3/4&quot;<br /> |<br /> |WITH OVERLOAD<br /> |1<br /> |-<br /> |3<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |<br /> |17<br /> |-<br /> |4<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |<br /> |17<br /> |-<br /> |5<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |17<br /> |-<br /> |6<br /> |E0207-1<br /> |TRANSFORMER<br /> |<br /> |480VAC TO 120VAC, 0.75 Kva<br /> |1<br /> |-<br /> |7<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |HW0003<br /> |NUT-NILN-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |E1023<br /> |WIREWAY<br /> |<br /> |SOLD BY LENGTH<br /> |A/R<br /> |-<br /> |11<br /> |E1024<br /> |MOUNTING TRACK<br /> |<br /> |SOLD BY LENGTH<br /> |A/R<br /> |-<br /> |12<br /> |E1020<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |16<br /> |-<br /> |13<br /> |E1040<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |E1330<br /> |END ANCHOR<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |E0341<br /> |GROUND LUG<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |E0902<br /> |FUSE-6A<br /> |<br /> |FLM-6<br /> |1<br /> |}<br /> <br /> ==== '''&lt;big&gt;''[Current] Control Panel for Units with 20 HP Power Unit''&lt;/big&gt;''' ====<br /> [[File:BE-TS (Current) Control Panel for Units with 20HP.png|alt=BE-TS (Current) Control Panel for Units with 20HP|frameless|601x601px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-24&quot; X 16&quot; X 6&quot;<br /> |<br /> |CONSULT FACTORY<br /> |1<br /> |-<br /> |2<br /> |E0123-1<br /> |HANDLE-DISCONNECT<br /> |<br /> |INCL. MOUNTING SCREWS<br /> |1<br /> |-<br /> |3<br /> |E0662<br /> |RESTRAINT-3/4&quot;-LIQUID TIGHT<br /> |<br /> |INCL. LOCKNUT<br /> |1<br /> |-<br /> |4<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |GRIP SIZE .500&quot; TO .625&quot;<br /> |2<br /> |-<br /> |5<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |GRIP SIZE .625&quot; TO .750&quot;<br /> |1<br /> |-<br /> |6<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |7<br /> |E0661<br /> |RESTRAINT-3/4&quot;-90 DEG-LIQUID TIGHT<br /> |<br /> |INCL. LOCKNUT<br /> |1<br /> |-<br /> |8<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |GRIP SIZE .250&quot; TO .375&quot;<br /> |1<br /> |-<br /> |9<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |GRIP SIZE .450&quot; TO .560&quot;<br /> |2<br /> |-<br /> |10<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |11<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |}<br /> [[File:BE-TS (Current) Control Panel for Units with 20HP Details.png|alt=BE-TS (Current) Control Panel for Units with 20HP Details|frameless|645x645px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |YE0506<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |''Blank panel without holes''<br /> |1<br /> |-<br /> |2<br /> |YE0205-1<br /> |SWITCH-DISCONNECT-80A<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43036007<br /> |SHAFT-DISCONNECT<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |YE0409<br /> |FUSE HOLDER-SINGLE POLE<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |E0914<br /> |FUSE-10A<br /> |<br /> |''FLM-10''<br /> |1<br /> |-<br /> |6<br /> |E0902<br /> |FUSE-6A<br /> |<br /> |''FLM-6''<br /> |1<br /> |-<br /> |7<br /> |E0903<br /> |FUSE-12A<br /> |<br /> |''FLM-12''<br /> |1<br /> |-<br /> |8<br /> |YE0402<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |17<br /> |-<br /> |9<br /> |YE0405<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |YE0406<br /> |END ANCHOR<br /> |<br /> |<br /> |6<br /> |-<br /> |11<br /> |E0136<br /> |FUSE HOLDER-3 POLE<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |YE0901<br /> |FUSE-40A<br /> |<br /> |JTD-40-ID<br /> |3<br /> |-<br /> |13<br /> |E1013<br /> |BASE-RELAY<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |E1012<br /> |RELAY-11 PIN<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |E0137<br /> |FUSE HOLDER-2 POLE<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |YE0902<br /> |FUSE-10A<br /> |<br /> |''KLDR-10''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |17<br /> |N/A<br /> |CONTACTOR, &quot;A40&quot; SERIES<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |E0132-1<br /> |CONTACTOR, &quot;AF38&quot; SERIES<br /> |80332009<br /> |<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |18<br /> |N/A<br /> |OVERLOAD, &quot;TA&quot; SERIES<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |E0131-1<br /> |OVERLOAD, &quot;TF&quot; SERIES<br /> |80332009<br /> |<br /> |1<br /> |-<br /> |19<br /> |E1023<br /> |WIREWAY<br /> |<br /> |''Sold by length''<br /> |A/R<br /> |-<br /> |20<br /> |E0908<br /> |MOUNTING RAIL<br /> |<br /> |''Sold by length''<br /> |A/R<br /> |-<br /> |21<br /> |E1070<br /> |GROUND BAR-4 POSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |22<br /> |E1071<br /> |GROUND BAR-7 POSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |23<br /> |HW1061<br /> |SCREW-RHMS-#8-32 X 1&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |24<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> | rowspan=&quot;3&quot; |''Track and Wireway mounting hardware (Not shown)''<br /> |14<br /> |-<br /> |25<br /> |HW0133<br /> |WASHER-FLAT-#8<br /> |<br /> |14<br /> |-<br /> |26<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |17<br /> |-<br /> |27<br /> |E0139<br /> |AUXILIARY CONTACT BLOCK<br /> |80332009<br /> |''†† See notes''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† &quot;A40&quot; Series Contactor and &quot;TA&quot; Series Overload no longer available as of mid-March 2022. Components must be replaced with current Overload &amp; Relay Kit 80332009.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Auxiliary contact Block required for units equipped with &quot;AF38&quot; Series Contactor &amp; &quot;TF&quot; Series Overload.''<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Transformer&lt;/big&gt;&lt;/u&gt;''' ===<br /> '''&lt;big&gt;''Transformer for Units with 20 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS Transformer for Units with 20HP.png|alt=BE-TS Transformer for Units with 20HP|frameless|554x554px]]<br /> <br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0220<br /> |TRANSFORMER<br /> |<br /> |''480VAC to 120VAC, 3kVA''<br /> |1<br /> |-<br /> |2<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |3<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |7<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |3<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;Operator Console&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Operator Console Electrical.png|alt=BE-TS Operator Console Electrical|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0327<br /> |KEYED ACTUATOR ASSEMBLY<br /> |<br /> |''Includes 2 Keys &amp; Contact Block'' <br /> |1<br /> |-<br /> |2<br /> |E0351<br /> |KEY-REPLACEMENT<br /> |<br /> |''Set of 2 Keys''<br /> |A/R<br /> |-<br /> |3<br /> |E0309-1<br /> |HOUR METER<br /> |<br /> |''† Includes mounting hardware''<br /> |1<br /> |-<br /> |4<br /> |N/A<br /> |SWITCH-SELECTOR-3 POSITION<br /> |<br /> |''ON-OFF-ON, †† See notes''<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |5<br /> |N/A<br /> |LEGEND PLATE-VACUUM<br /> |<br /> |''††† See notes''<br /> |1<br /> |-<br /> |N/A<br /> |LEGEND PLATE-MAGNET<br /> |<br /> |''††† See notes''<br /> |1<br /> |-<br /> |6<br /> |N/A<br /> |CONTACT BLOCK-N/O<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |7<br /> |N/A<br /> |CONTACT BLOCK-N/C<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |8<br /> |E1083<br /> |SWITCH-SELECTOR-3 POSITION<br /> |80232001<br /> |''OFF-ON-OFF''<br /> |1<br /> |-<br /> |9<br /> |E1080<br /> |CONTACT BLOCK-N/O &amp; N/C<br /> |80232001<br /> |<br /> |2<br /> |-<br /> |10<br /> |YE0311<br /> |SWITCH-EMERGENCY STOP<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |YE0407<br /> |LEGEND PLATE-EMERGENCY STOP<br /> |<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Current Hour Meter is 3-Bolt version. Replacement of 4-Bolt version will require new mounting holes to be drilled in dashboard.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Parts no longer available. Must order new Selector Switch Kit 80232001''<br /> |-<br /> | colspan=&quot;6&quot; |''††† Parts no longer available. See Labels &amp; Placards section for current Placards''<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;Foot Switch&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Foot Switch Electrical.png|alt=BE-TS Foot Switch Electrical|frameless|701x701px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0301-1<br /> |SWITCH-FOOT OPERATED<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .500&quot; to .625&quot;''<br /> |1<br /> |-<br /> |3<br /> |E0515<br /> |CORD-14-3-SO/SOW<br /> |<br /> |<br /> |9'<br /> |-<br /> |4<br /> |HC0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |''If equipped''<br /> |2<br /> |-<br /> |5<br /> |HC0103<br /> |WASHER-1/4&quot;-LOCK<br /> |<br /> |''If equipped''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Open-Style Switch is a direct replacement for discontinued, Covered-Style Switch.'' <br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''Gate Switch'''&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Gate Switch Electrical.png|alt=BE-TS Gate Switch Electrical|frameless|613x613px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0312<br /> |SWITCH-PUSH BUTTON<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43017041<br /> |MOUNT-GATE SWITCH<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW1077<br /> |SCREW-RHMS-#10-24 X 5/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0307<br /> |BOLT-SHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |PL0502<br /> |GROMMET-3/8&quot; I.D.<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |YE0305<br /> |SWITCH-ROLLER<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |SS0303<br /> |WASHER-FLAT-#8<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |SS0111<br /> |SCREW-SHCS-#8-32 X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |SS0203<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''Proximity Switch'''&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Proximity Switch Electrical.png|alt=BE-TS Proximity Switch Electrical|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0314<br /> |SENSOR-PROXIMITY-30MM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43017027-2<br /> |BRACKET-PROXIMITY SENSOR<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |6<br /> |43017037-2<br /> |ANGLE-PROXIMITY SENSOR TARGET<br /> |<br /> |''Rotary Actuator units'' <br /> |1<br /> |-<br /> |43017084-2<br /> |ANGLE-PROXIMITY SENSOR TARGET<br /> |<br /> |''Helical Actuator units'' <br /> |1<br /> |-<br /> |7<br /> |HW0341<br /> |BOLT-FHSCS-1/4-20 X 5/8&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''120V Receptacle'''&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Proximity Switch Electrical.png|alt=BE-TS Proximity Switch Electrical|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |3<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0650<br /> |RECEPTACLE-DUPLEX<br /> |<br /> |''† 20A''<br /> |1<br /> |-<br /> |5<br /> |E0651<br /> |COVER-RECEPTACLE-DUPLEX<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0655<br /> |RECEPTACLE-GFCI<br /> |<br /> |''20A''<br /> |1<br /> |-<br /> |7<br /> |E0656<br /> |COVER-RECEPTACLE-GFCI<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |E0654<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |E0657<br /> |COVER-RECEPTACLE-DUPLEX/GFCI<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |''Mounting hardware (Not shown)''<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† If Duplex Receptacle has Split Feed (1 set of black &amp; white wires for each plug), the Break-Off Fin must be removed prior to installation.'' <br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''Console Enclosure'''&lt;/big&gt;&lt;/u&gt; ===<br /> <br /> ==== '''&lt;big&gt;''[Discontinued] Operator Console Enclosure for Units with 10 HP Power Unit''&lt;/big&gt;''' ====<br /> [[File:BE-TS (Discontinued) Operator Console Enclosure for Units with 10 HP Power Unit.png|alt=BE-TS (Discontinued) Operator Console Enclosure for Units with 10 HP Power Unit|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-6&quot; X 6&quot; X 4 &quot;<br /> |<br /> |''Consult factory''<br /> |1<br /> |-<br /> |2<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |3<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |4<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |5<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |8<br /> |43817087-2<br /> |BRACKET-MOUNTING-ENCLOSURE<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> | rowspan=&quot;4&quot; |''Mounting bracket hardware (Not shown)''<br /> |2<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |2<br /> |}<br /> '''&lt;big&gt;''[Discontinued] Operator Console Enclosure Panel for Units with 10 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS (Discontinued) Operator Console Enclosure Panel for Units with 10 HP Power Unit.png|alt=BE-TS (Discontinued) Operator Console Enclosure Panel for Units with 10 HP Power Unit|frameless|566x566px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0639<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |''Without holes''<br /> |1<br /> |-<br /> |2<br /> |E1024<br /> |TRACK-TERMINAL BLOCK<br /> |<br /> |''4 7/8&quot; LG''<br /> |1<br /> |-<br /> |3<br /> |E1020<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |9<br /> |-<br /> |4<br /> |E1330<br /> |END ANCHOR<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |E1040<br /> |END BARRIER<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0341<br /> |GROUND LUG<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |''2 for track mounting''<br /> |3<br /> |-<br /> |8<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |''2 for track mounting''<br /> |3<br /> |-<br /> |9<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |''2 for track mounting''<br /> |3<br /> |}<br /> '''&lt;big&gt;''[Current] Operator Console Enclosure for Units with 20 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS (Current) Operator Console Enclosure for Units with 20 HP Power Unit.png|alt=BE-TS (Current) Operator Console Enclosure for Units with 20 HP Power Unit|frameless|549x549px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-8&quot; X 8&quot; X 4&quot;<br /> |<br /> |''Consult factory''<br /> |1<br /> |-<br /> |2<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |3<br /> |-<br /> |3<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .625&quot; to .750&quot;''<br /> |1<br /> |-<br /> |4<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''† Grip size .450&quot; to .560&quot;''<br /> |4<br /> |-<br /> |5<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''†'' ''Grip size .250&quot; to .375&quot;''<br /> |4<br /> |-<br /> |6<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |11<br /> |-<br /> |7<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |E1349<br /> |SEAL-KNOCKOUT-1/2&quot;<br /> |<br /> |''† See notes''<br /> |A/R<br /> |-<br /> |9<br /> |43037003-2<br /> |BRACKET-MOUNTING-ENCLOSURE<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> | rowspan=&quot;4&quot; |''Mounting bracket hardware (Not shown)''<br /> |2<br /> |-<br /> |12<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |2<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Restraints sold for machines equipped with all available options. Machines built without certain options will have Knockout Seals (Item #8) installed in place of restraints.''<br /> |}<br /> '''&lt;big&gt;''[Current] Operator Console Enclosure Panel for Units with 20 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS (Current) Operator Console Enclosure Panel for Units with 20 HP Power Unit.png|alt=BE-TS (Current) Operator Console Enclosure Panel for Units with 20 HP Power Unit|frameless|527x527px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0135<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |''Blank panel without holes''<br /> |1<br /> |-<br /> |2<br /> |E0908<br /> |MOUNTING RAIL<br /> |<br /> |''Sold by length''<br /> |A/R<br /> |-<br /> |3<br /> |YE0402<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |14<br /> |-<br /> |4<br /> |YE0405<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |YE0406<br /> |END ANCHOR<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |E1074<br /> |JUMPER-2 POLE<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |E0130<br /> |GROUND BAR-7 POSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW1061<br /> |SCREW-RHMS-#8-32 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> | rowspan=&quot;3&quot; |''Track and Wireway mounting hardware (Not shown)''<br /> |2<br /> |-<br /> |10<br /> |HW0133<br /> |WASHER-FLAT-#8<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |4<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''Junction Box'''&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Junction Box.png|alt=BE-TS Junction Box|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |2<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |3<br /> |-<br /> |3<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .500&quot; to .625&quot;''<br /> |4<br /> |-<br /> |4<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .625&quot; to .750&quot;''<br /> |2<br /> |-<br /> |5<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Top Module Junction Box&lt;/big&gt;''''' ====<br /> [[File:BE-TS Junction Box.png|alt=BE-TS Junction Box|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1329<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0662<br /> |RESTRAINT-3/4&quot;-LIQUID TIGHT<br /> |<br /> |''Includes Locknut'' <br /> |1<br /> |-<br /> |3<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .625&quot; to .750&quot;''<br /> |1<br /> |-<br /> |4<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Wiring Diagrams&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;BE-TS with 10 HP Motor Wiring Diagram&lt;/big&gt;''''' ====<br /> [[File:BE-TS Wiring Diagram-10HP Motor.png|alt=BE-TS Wiring Diagram-10HP Motor|frameless|800x800px]]<br /> <br /> ==== '''''&lt;big&gt;BE-TS with Magnet and 10 HP Motor Wiring Diagram&lt;/big&gt;''''' ====<br /> [[File:BE-TS with Magnet and 10HP Motor Wiring Diagram.png|alt=BE-TS with Magnet and 10HP Motor Wiring Diagram|frameless|800x800px]]<br /> <br /> ==== '''''&lt;big&gt;BE-TS with Magnet and 20 HP Motor Wiring Diagram&lt;/big&gt;''''' ====<br /> [[File:BE-TS Magnet Wiring Diagram-20HP Motor.png|alt=BE-TS Magnet Wiring Diagram-20HP Motor|frameless|800x800px]]<br /> <br /> [[File:BE-TS Magnet Wiring Diagram-20HP Motor-02.png|alt=BE-TS Magnet Wiring Diagram-20HP Motor-02|frameless|800x800px]]<br /> <br /> [[File:BE-TS Magnet Wiring Diagram-20HP Motor-03.png|alt=BE-TS Magnet Wiring Diagram-20HP Motor-03|frameless|800x800px]]<br /> <br /> [[File:BE-TS Magnet Wiring Diagram-20HP Motor-04.png|alt=BE-TS Magnet Wiring Diagram-20HP Motor-04|frameless|800x800px]]<br /> <br /> == &lt;big&gt;Hydraulics&lt;/big&gt; ==<br /> <br /> === '''&lt;big&gt;&lt;u&gt;[Discontinued] 10 HP Power Unit&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:(Discontinued) BE-TS Power Unit (10HP).png|alt=(Discontinued) BE-TS Power Unit (10HP)|frameless|553x553px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0011<br /> |MOTOR-ELECTRIC-10HP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0326<br /> |ADAPTER-PUMP TO MOTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0325<br /> |PUMP-VANE-16 GPM<br /> |<br /> |''Variable displacement''<br /> |1<br /> |-<br /> |4<br /> |HC0327<br /> |COUPLING BODY-1 3/8&quot;<br /> |<br /> |''Motor end''<br /> |1<br /> |-<br /> |5<br /> |HC0329<br /> |SPIDER-COUPLING INSERT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HC0328<br /> |COUPLING BODY-7/8&quot;<br /> |<br /> |''Pump end''<br /> |1<br /> |-<br /> |7<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1 1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H1549<br /> |ADAPTER-#20 JICM X #24 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |H1595<br /> |ADAPTER-90 DEG-#20 JICM X #20 JICSW<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |H1609<br /> |ADAPTER-90 DEG-#12 JICM X #16 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |H1522<br /> |ADAPTER-#12 JICSW X #12 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |HC0260<br /> |VALVE-MAIN SYSTEM RELIEF<br /> |<br /> |<br /> |1<br /> |-<br /> |15a<br /> |43846003<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''†† For Item 15 (Not shown)''<br /> |A/R<br /> |-<br /> |16<br /> |HC0318<br /> |GAUGE-PRESSURE<br /> |<br /> |<br /> |1<br /> |-<br /> |17<br /> |H0206<br /> |PLUG-#4 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |H1108<br /> |ADAPTER-#10 JICM X #12 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |H1522<br /> |ADAPTER-#12 JICSW X #12 SAEM<br /> |<br /> |''† See note''<br /> |1<br /> |-<br /> |20<br /> |H1542<br /> |ADAPTER-#12 JICM X #12 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |21<br /> |HC0280<br /> |VALVE-CHECK<br /> |<br /> |''† See note''<br /> |1<br /> |-<br /> |22<br /> |H1542<br /> |ADAPTER-#12 JICM X #12 SAEM<br /> |<br /> |''† See note''<br /> |1<br /> |-<br /> |23<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .500&quot; to .625&quot;''<br /> |1<br /> |-<br /> |23a<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |''For Item 23 (Not shown)''<br /> |1<br /> |-<br /> |24<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |25<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |26<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |27<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Parts noted used on units built after April 2001.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Cartridges are for replacement only.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;[Discontinued] 30 Gallon Reservoir&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:(Discontinued) BE-TS 30 Gallon Reservoir.png|alt=(Discontinued) BE-TS 30 Gallon Reservoir|frameless|542x542px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43842001<br /> |RESERVOIR-VERTICAL-30 GAL<br /> |<br /> |''Includes Items 1 through 8''<br /> |1<br /> |-<br /> |1<br /> |HC0542<br /> |GASKET-CHANNEL<br /> |<br /> |''Sold by length''<br /> |7'<br /> |-<br /> |2<br /> |HC0340<br /> |GAUGE-SIGHT<br /> |<br /> |''with Thermometer''<br /> |1<br /> |-<br /> |3<br /> |HC0306<br /> |STRAINER-SUCTION<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HC0308<br /> |FILLER/BREATHER ASSEMBLY<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0209<br /> |SCREW-RHMS-10-32 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |BI0110<br /> |ELBOW-STR-90 DEG-#16 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |8<br /> |H0208<br /> |PLUG-#12 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1590<br /> |ADAPTER-90 DEG-#16 JICM X #16 FNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |BI0102<br /> |ELBOW-#12 FNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |BI0020<br /> |NIPPLE-#12 NPT X 3&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |BI0301<br /> |TEE-#12 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |H1502<br /> |ADAPTER-#8 JICM X #12 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |BI0002<br /> |NIPPLE-CLOSE-#12 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HC0307<br /> |RETURN LINE FILTER ASSEMBLY<br /> |<br /> |''Housing and Filter''<br /> |1<br /> |-<br /> |16<br /> |HC0317<br /> |FILTER-RETURN LINE<br /> |<br /> |''Replacement filter''<br /> |1<br /> |-<br /> |17<br /> |H1509<br /> |ADAPTER-#10 JICM X #12 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> | rowspan=&quot;4&quot; |''Mounting hardware''<br /> <br /> ''(Not shown)''<br /> |4<br /> |-<br /> |19<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |8<br /> |-<br /> |20<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |4<br /> |-<br /> |21<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;[Current] Power Unit (20 HP)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:(Current) BE-TS 30 Power Unit (20 HP).png|alt=(Current) BE-TS 30 Power Unit (20 HP)|frameless|531x531px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0040<br /> |MOTOR-ELECTRIC-20 HP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0357<br /> |ADAPTER-PUMP TO MOTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0356<br /> |PUMP-PISTON-71CC<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HC0358-M<br /> |COUPLING BODY-M300-1 5/8&quot; BORE<br /> |<br /> |''MOTOR SIDE''<br /> |1<br /> |-<br /> |5<br /> |HC0358-I<br /> |SPIDER-COUPLING INSERT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HC0358-P<br /> |COUPLING BODY-M300-1 1/4&quot; BORE<br /> |<br /> |''PUMP SIDE''<br /> |1<br /> |-<br /> |7<br /> |HW0602<br /> |BOLT-HHCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0113<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |H1604<br /> |ADAPTER-90 DEG-#12 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HC0363<br /> |ADAPTER-FLANGE-#32 NPT<br /> |<br /> |''Includes O-ring''<br /> |1<br /> |-<br /> |11<br /> |HC0240<br /> |BLOCK-CHECK VALVE<br /> |<br /> |''Includes Cartridge &amp; O-ring''<br /> |1<br /> |-<br /> |12<br /> |N/A<br /> |CARTRIDGE-CHECK VALVE<br /> |<br /> |''† Replacement cartridge''<br /> |A/R<br /> |-<br /> |13<br /> |H0300<br /> |ELBOW-STR-90 DEG-#4 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |HC0318<br /> |GAUGE-PRESSURE<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |HE0704<br /> |ADAPTER-SPLIT FLANGE-1&quot;<br /> |<br /> |''2-Piece adapter with O-ring''<br /> |1<br /> |-<br /> |16<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |H0211<br /> |ADAPTER-#24 NPT X #12<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |E0661<br /> |RESTRAINT-3/4&quot;-90 DEG-LIQUID TIGHT<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |HW0513<br /> |BOLT-HHCS-1/2-13 X 2 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |20<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |21<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTE<br /> |-<br /> | colspan=&quot;6&quot; |''† Consult factory''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;[Current] 45 Gallon Reservoir&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:(Current) BE-TS 45 Gallon Reservoir.png|alt=(Current) BE-TS 45 Gallon Reservoir|frameless|547x547px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43842010<br /> |45 GAL RESERVOIR ASSEMBLY<br /> |<br /> |''Includes Items 1 through 7''<br /> |A/R<br /> |-<br /> |1<br /> |43848005<br /> |PLATE-COVER<br /> |<br /> |''† See note''<br /> |1<br /> |-<br /> |2<br /> |HC0308<br /> |FILLER/BREATHER ASSEMBLY<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0209<br /> |SCREW-RHMS-10-32 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |4<br /> |HC0340<br /> |GAUGE-SIGHT<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H0208<br /> |PLUG-#12 NPT<br /> |<br /> |''Non-IIoT equipped units only''<br /> |1<br /> |-<br /> |6<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |7<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |8<br /> |HC0361<br /> |HOUSING-FILTER<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HC0354<br /> |CARTRIDGE-FILTER<br /> |<br /> |''10 Micron filtration''<br /> |1<br /> |-<br /> |10<br /> |HC0362<br /> |FLANGE-SUCTION TUBE<br /> |<br /> |''Includes hardware''<br /> |1<br /> |-<br /> |11<br /> |43848008<br /> |TUBE-SUCTION<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |H1569<br /> |ADAPTER-45 DEG-#12 JICM X #12 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |H0202<br /> |REDUCER-#24 SAE X #12 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |H1622<br /> |ADAPTER-90 DEG-#12 SAEM X #12 JICM<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |H1644<br /> |PLUG-#24 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |H1610<br /> |ADAPTER-45 DEG-#12 JICSW X #12 JICM<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |PB0311-1<br /> |NIPPLE-#12 NPT X 2&quot;-BRASS<br /> |<br /> | rowspan=&quot;3&quot; |''†† See notes''<br /> |1<br /> |-<br /> |20<br /> |BI0301<br /> |TEE-#12 FNPT<br /> |<br /> |1<br /> |-<br /> |21<br /> |H1502<br /> |ADAPTER-#8 JICM X #12 MNPT<br /> |<br /> |2<br /> |-<br /> |22<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> | rowspan=&quot;5&quot; |''Reservoir mounting hardware'' <br /> <br /> ''(Not shown)''<br /> |2<br /> |-<br /> |23<br /> |HW0405<br /> |BOLT-HHCS-3/8-16 X 2&quot;<br /> |<br /> |2<br /> |-<br /> |24<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |8<br /> |-<br /> |25<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |4<br /> |-<br /> |26<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† RVT silicone required to seal cover plate after removal.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Components required for units equipped with radial piston drive wheel motors plumbed with case drain hoses. See Drive Wheel Assembly section.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Valve Assembly&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Lift Valve and Manifold Detail&lt;/big&gt;''''' ====<br /> [[File:BE-TS Lift Valve and Manifold.png|alt=BE-TS Lift Valve and Manifold|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |80342001<br /> |LEVER VALVE RETRO KIT<br /> |<br /> |''† Required prior to 2006'' <br /> |A/R<br /> |-<br /> |1<br /> |HC0257<br /> |VALVE-LEVER<br /> |<br /> |''Effective from 2006 to Present''<br /> |1<br /> |-<br /> |2<br /> |HC0252<br /> |MANIFOLD-D05-1 BANK<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0318<br /> |BOLT-SHCS-1/4-20 X 1 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |H1642<br /> |PLUG-#12 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H1542<br /> |ADAPTER-#12 JICM X #12 SAEM<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HC0248<br /> |FIXED FLOW REGULATOR<br /> |<br /> |''††14 GPM''<br /> |1<br /> |-<br /> |12<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |13<br /> |H1540<br /> |ADAPTER-#8 JICM X #8 SAEM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |14<br /> |43817085<br /> |PLATE-ADAPTER-VALVE<br /> |<br /> |''† Not shown''<br /> |1<br /> |-<br /> |15<br /> |SS0104<br /> |BOLT-SHCS-1/4-20 X 5/8&quot;-SST<br /> |<br /> |''† Not shown''<br /> |4<br /> |-<br /> |16<br /> |SS0300<br /> |WASHER-FLAT-1/4&quot;-SAE-SST<br /> |<br /> |''† Not shown''<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |<br /> |-<br /> | colspan=&quot;6&quot; |''† Kit includes Items 1 &amp; 14 through 16. Minor modifications to the dash board required.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† For units shipped April 2017 to present''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Floor Drive / Arm Rotation Valve and Manifold Detail&lt;/big&gt;''''' ====<br /> [[File:BE-TS Floor Drive-Arm Rotation Valve and Manifold.png|alt=BE-TS Floor Drive-Arm Rotation Valve and Manifold|frameless|570x570px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0233<br /> |VALVE-LEVER<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HC0251<br /> |MANIFOLD-D03-2 BANK<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1545<br /> |ADAPTER-#10 JICM X #10 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |H1600<br /> |ADAPTER-90 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |H1587<br /> |ADAPTER-#6 JICSW X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HC0211<br /> |VALVE-ADJUSTABLE FLOW CONTROL<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |H1504<br /> |ADAPTER-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |H1640<br /> |PLUG-#6 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |43817033-2<br /> |RISER PLATE<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |14<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |HC0233-SK<br /> |SEAL KIT<br /> |<br /> |''For Item 1 (Not shown)''<br /> |A/R<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Valve Assembly&lt;/big&gt;''''' ====<br /> [[File:BE-TS Valve Assembly.png|alt=BE-TS Valve Assembly|frameless|538x538px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0233<br /> |VALVE-LEVER<br /> |<br /> |<br /> |3<br /> |-<br /> |2<br /> |HC0250<br /> |MANIFOLD-D03-3 BANK<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1610<br /> |ADAPTER-90 DEG-#10 JICM X #10 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |H1641<br /> |PLUG-#10 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H1000<br /> |ADAPTER-#8 SAEM X #4 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |H0001<br /> |NIPPLE-#4 NPT<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HC0247<br /> |FIXED FLOW REGULATOR-2.25 GPM<br /> |<br /> |''† See notes''<br /> |4<br /> |-<br /> |8<br /> |H1504<br /> |ADAPTER-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |H1640<br /> |PLUG-#6 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |H1540<br /> |ADAPTER-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |43817034-2<br /> |RISER PLATE<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |14<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |15<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HC0233-SK<br /> |SEAL KIT<br /> |<br /> |''For Item 1 (Not shown)''<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Units built prior to January 2107 equipped with Adjustable Flow Controls. Fixed Flow Regulators are direct replacement for Adjustable Flow Controls.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Lift Cylinder&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Lift Cylinder.png|alt=BE-TS Lift Cylinder|frameless|582x582px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43822006<br /> |CLEVIS ASSEMBLY<br /> |<br /> |''Sold as assembly only''<br /> |4<br /> |-<br /> |2<br /> |HW0813<br /> |SCREW-SHSS-3/8-16 X 1/2&quot;<br /> |<br /> |''Nylon tipped''<br /> |8<br /> |-<br /> |3<br /> |HC0420<br /> |CYLINDER-LIFT<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |H1645<br /> |ADAPTER-90 DEG-#8 SAEM X #6 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |H0212<br /> |ADAPTER-#6 NPT X #8 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HC0425<br /> |VELOCITY FUSE<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Lift Circuit&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Lift Circuit.png|alt=BE-TS Lift Circuit|frameless|553x553px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43017014-2<br /> |SUPPORT-PILOT DOWN MANIFOLD<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43718008<br /> |STANDOFF<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0315<br /> |BOLT-HHCS-1/4-20 X 4 1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |10<br /> |-<br /> |7<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |5<br /> |-<br /> |8<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |5<br /> |}<br /> <br /> ==== '''''&lt;big&gt;[Discontinued] Lift Circuit Configuration&lt;/big&gt;''''' ====<br /> [[File:(Discontinued) BE-TS Lift Circuit Configuration.png|alt=(Discontinued) BE-TS Lift Circuit Configuration|frameless|507x507px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |H1507<br /> |ADAPTER-#8 JICM X #8 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0264<br /> |VALVE-CHECK-PILOT TO OPEN<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H1621<br /> |ADAPTER-#4 SAEM X #2 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HC0269<br /> |VALVE-ADJUSTABLE FLOW CONTROL<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |H1591<br /> |ADAPTER-90 DEG-#6 JICM X #2 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |H1587<br /> |ADAPTER-#6 JICSW X #4 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1501<br /> |ADAPTER-#8 JICM X #6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43047002<br /> |MANIFOLD-PILOT DOWN<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> ==== '''''&lt;big&gt;[Current] Lift Circuit Configuration&lt;/big&gt;''''' ====<br /> [[File:(Current) BE-TS Lift Circuit Configuration.png|alt=(Current) BE-TS Lift Circuit Configuration|frameless|534x534px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0215<br /> |VALVE-CHECK-CARTRIDGE<br /> |<br /> |<br /> |8<br /> |-<br /> |2<br /> |H1560<br /> |ADAPTER-45 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |H1670<br /> |ADAPTER-45 DEG-#12 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |H1612<br /> |ADAPTER-90 DEG-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HC0283<br /> |VALVE-COUNTER BALANCE<br /> |<br /> |''Includes cartridge''<br /> |1<br /> |-<br /> |6<br /> |43846004<br /> |CARTRIDGE-COUNTER BALANCE<br /> |<br /> |''Replacement cartridge''<br /> |A/R<br /> |-<br /> |7<br /> |H1552<br /> |ADAPTER-#6 JICM X #6 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |H1587<br /> |ADAPTER-#6 JICSW X #4 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1501<br /> |ADAPTER-#8 JICM X #6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43047002<br /> |MANIFOLD-PILOT DOWN<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Cartridges are for replacement only''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Down-Speed Flow Control&lt;/big&gt;''''' ====<br /> [[File:BE-TS Down-Speed Flow Control.png|alt=BE-TS Down-Speed Flow Control|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0270<br /> |VALVE-ADJUSTABLE FLOW CONTROL<br /> |<br /> |''Pressure compensated''<br /> |1<br /> |-<br /> |2<br /> |H0007<br /> |NIPPLE-#8 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1647<br /> |ADAPTER-90 DEG-#10 SAEM X #8 FNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |H1680<br /> |ADAPTER-#10 JICM X #8 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H1690<br /> |ADAPTER-#10 JICSW X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HC0248<br /> |FIXED FLOW REGULATOR<br /> |<br /> |''14 GPM''<br /> |1<br /> |-<br /> |7<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |H1612<br /> |ADAPTER-90 DEG-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1547<br /> |ADAPTER-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Cross Port Relief&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Mounting Configuration&lt;/big&gt;''''' ====<br /> [[File:BE-TS Cross Port Relief Mounting Configuration.png|alt=BE-TS Cross Port Relief Mounting Configuration|frameless|546x546px]]<br /> {| class=&quot;wikitable&quot;<br /> ! colspan=&quot;6&quot; |UNITS BUILT PRIOR TO SEPTEMBER, 2014<br /> |-<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> ! colspan=&quot;6&quot; |UNITS BUILT SEPTEMBER, 2014 TO DECEMBER, 2014<br /> |-<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW0305<br /> |BOLT-HHCS-1/4-20 X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |7<br /> |43058004<br /> |PLATE-SPACER<br /> |<br /> |<br /> |1<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> ! colspan=&quot;6&quot; |UNITS BUILT DECEMBER, 2014 TO PRESENT<br /> |-<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |2<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |}<br /> ''NOTE: Effectivity dates refer to dates new extractor units shipped from the factory. Replacement part effectivity may differ due to factory inventory levels at time of parts order. Consult factory if unsure of parts needed.''<br /> <br /> ==== '''''&lt;big&gt;Components&lt;/big&gt;''''' ====<br /> [[File:BE-TS Cross Port Relief Components.png|alt=BE-TS Cross Port Relief Components|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0262<br /> |VALVE-CROSS PORT RELIEF<br /> |<br /> |''Includes cartridges''<br /> |1<br /> |-<br /> |2<br /> |43046002<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''For Item 1''<br /> |A/R<br /> |-<br /> |3<br /> |H1540<br /> |ADAPTER-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |H1507<br /> |ADAPTER-#8 JICM X #8 MNPT<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |HC0239<br /> |VALVE-ADJUSTABLE FLOW CONTROL<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |H1568<br /> |ADAPTER-45 DEG-#8 JICM X #8 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |H1646<br /> |ADAPTER-90 DEG-#8 SAEM X #6 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |H0805<br /> |TEE-#6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HC0273<br /> |REGULATOR-FIXED FLOW<br /> |<br /> |''7.0 GPM''<br /> |4<br /> |-<br /> |11<br /> |H1501<br /> |ADAPTER-#8 JICM X #6 MNPT<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Floor Drive Cutout&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Floor Drive Cutout.png|alt=BE-TS Floor Drive Cutout|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |SOLENOID-DRIVE CUTOUT<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |7<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |BI0001<br /> |NIPPLE-CLOSE-#8 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |N/A<br /> |SOLENOID-DRIVE CUTOUT<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |10<br /> |YE0501<br /> |CONNECTOR-SOLENOID<br /> |<br /> |''DIN 43650''<br /> |1<br /> |-<br /> |11<br /> |43058004<br /> |PLATE-SPACER<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |HC0278-TS/QS<br /> |SOLENOID-DRIVE CUTOUT<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |H1547<br /> |ADAPTER-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |H1612<br /> |ADAPTER-90 DEG-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Part obsolete. Must be replaced with Retro Kit Part # 80242007.''<br /> |-<br /> | colspan=&quot;6&quot; |''NOTE: Effectivity dates refer to dates new extractor units shipped from the factory. Replacement part effectivity may differ due to factory inventory levels at time of parts order. Consult factory if unsure of parts needed.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Counter Balance Valve&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Counter Balance Valve.png|alt=BE-TS Counter Balance Valve|frameless|554x554px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0263<br /> |VALVE-COUNTER BALANCE<br /> |<br /> |<br /> |1<br /> |-<br /> |1a<br /> |43046004<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''† For Item 1 (Not shown)''<br /> |A/R<br /> |-<br /> |2<br /> |H1615<br /> |ADAPTER-90 DEG-#6 JICM X #6 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |H1552<br /> |ADAPTER-#6 JICM X #6 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0305<br /> |BOLT-HHCS-1/4-20 X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Cartridges are for replacement only''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Transition Plate&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Transition Plate.png|alt=BE-TS Transition Plate|frameless|576x576px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817067-2<br /> |PLATE-TRANSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |H0020<br /> |UNION-BULKHEAD-45 DEG-#6 JICM<br /> |<br /> |<br /> |8<br /> |-<br /> |3<br /> |H0021<br /> |NUT-BULKHEAD-#6 JIC<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Return Line Manifold&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Return Line Manifold.png|alt=BE-TS Return Line Manifold|frameless|555x555px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43847001<br /> |MANIFOLD-RETURN LINE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |H1501<br /> |ADAPTER-#8 JICM X #6 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1503<br /> |ADAPTER-#12 JICM X #12 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |43817069-2<br /> |BRACKET-BULKHEAD<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |H0015<br /> |UNION-BULKHEAD-90 DEG-#12 JICM<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H0016<br /> |NUT-BULKHEAD-#12 JIC<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;EQ Chain Hose Guard&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS EQ Chain Hose Guard.png|alt=BE-TS EQ Chain Hose Guard|frameless|577x577px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43017074-2<br /> |GUARD-HOSE-EQ CHAIN<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Used on units manufactured after May 2015.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Hydraulic Schematics&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Hydraulic Schematic.png|alt=BE-TS Hydraulic Schematic|frameless|1180x1180px]]<br /> <br /> ==== '''''&lt;big&gt;Extended Reach Hydraulic Schematics&lt;/big&gt;''''' ====<br /> [[File:BE-TS Hydraulic Schematic Extended Reach.png|alt=BE-TS Hydraulic Schematic Extended Reach|frameless|905x905px]]<br /> <br /> == &lt;big&gt;Standard Available Options&lt;/big&gt; ==<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Strobe &amp; Alarm&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''&lt;big&gt;''[Discontinued] Strobe Light &amp; Stanchion Configuration''&lt;/big&gt;''' ====<br /> [[File:(Discontinued) BE-TS Strobe Light.png|alt=(Discontinued) BE-TS Strobe Light|frameless|722x722px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0317<br /> |STROBE LIGHT<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41215014<br /> |STANCHION<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0401<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |E1010<br /> |RECEPTACLE-TWIST LOCK<br /> |<br /> |''(Not shown)''<br /> |1<br /> |-<br /> |7<br /> |E1011<br /> |PLUG-TWIST LOCK<br /> |<br /> |''(Not shown)''<br /> |1<br /> |}<br /> <br /> ==== '''&lt;big&gt;''[Discontinued] Audible Alarm Configuration''&lt;/big&gt;''' ====<br /> [[File:(Discontinued) BE-TS Audible Alarm.png|alt=(Discontinued) BE-TS Audible Alarm|frameless|490x490px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0317-A<br /> |AUDIBLE ALARM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0654<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |00117101-2<br /> |MOUNTING BRACKET<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |5<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> ==== '''&lt;big&gt;''[Current] Stack Light Strobe &amp; Alarm Configuration''&lt;/big&gt;''' ====<br /> [[File:(Current) BE-TS Stack Light Strobe and Alarm Configuration.png|alt=(Current) BE-TS Stack Light Strobe and Alarm Configuration|frameless|844x844px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0362<br /> |MOUNTING BASE<br /> |<br /> |''Includes restraints''<br /> |1<br /> |-<br /> |2<br /> |E0365<br /> |TERMINAL BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0363<br /> |STROBE LIGHT-AMBER-120VAC<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |4<br /> |E0364<br /> |AUDIBLE ALARM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |5<br /> |SS0118<br /> |SCREW-SHCS-#8-32 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |SS0303<br /> |WASHER-FLAT-#8<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |SS0203<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |E1010<br /> |RECEPTACLE-TWIST LOCK<br /> |<br /> |''(Not shown)''<br /> |1<br /> |-<br /> |9<br /> |E1011<br /> |PLUG-TWIST LOCK<br /> |<br /> |''(Not shown)''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† For units not equipped with the audible alarm option, a cap (not shown) mounts on top of the strobe light in place of the audible alarm. Cap included with base.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† For units not equipped with the strobe light option, the audible alarm mounts directly to the terminal base in place of the strobe light.'' <br /> |}<br /> <br /> ==== '''&lt;big&gt;''Strobe &amp; Alarm Mounting''&lt;/big&gt;''' ====<br /> [[File:BE-TS Strobe and Alarm Mounting.png|alt=BE-TS Strobe and Alarm Mounting|frameless|516x516px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41235060<br /> |STACK LIGHT STANCHION<br /> |<br /> |''Discontinued''<br /> |A/R<br /> |-<br /> |2<br /> |HW0401<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |3<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |4<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |REF<br /> |43032006<br /> |STANCHION ASSEMBLY<br /> |<br /> |''Includes items 5 through 8''<br /> |A/R<br /> |-<br /> |5<br /> |43035003<br /> |STACK LIGHT STANCHION<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43037007-2<br /> |CLAMP BRACKET<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0305<br /> |BOLT-HHCS-1/4-20 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0050<br /> |NUT-FLANGED-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |43037004-2<br /> |MOUNTING BRACKET<br /> |<br /> |''Overhead Guard only''<br /> |1<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Horn&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Horn.png|alt=BE-TS Horn|frameless|565x565px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |YE0308<br /> |BUTTON-HORN<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0317-A<br /> |AUDIBLE ALARM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0654<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |00117101-2<br /> |MOUNTING BRACKET<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |11<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Overhead Guard&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Overhead Guard.png|alt=BE-TS Overhead Guard|frameless|530x530px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817119-2<br /> |GUARD-SIDE<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |2<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0406<br /> |BOLT-HHCS-3/8-16 X 2-1/2&quot;<br /> |<br /> |<br /> |5<br /> |-<br /> |5<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |6<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |<br /> |<br /> |5<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Side Guards used on units built November 2013 to Present. Mounting hardware valid for all units with Removable Overhead Guard.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Operator Sheild&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''&lt;big&gt;''[Current] Operator Shield''&lt;/big&gt;''' ====<br /> [[File:(Current) BE-TS 30 Operator Sheild.png|alt=(Current) BE-TS 30 Operator Sheild|frameless|566x566px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43814025<br /> |OPERATOR SHIELD<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |HC0542<br /> |GASKET EDGING<br /> |<br /> |''(2) @ 38&quot; LG, (1) @ 60&quot; LG''<br /> |136&quot;<br /> |-<br /> |3<br /> |43817116-2<br /> |BRACKET-TOP<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |1412FSW<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |43817117-2<br /> |BRACKET-CENTER SUPPORT-OUTSIDE<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43817118-2<br /> |BRACKET-CENTER SUPPORT-INSIDE<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |SS0114<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |8<br /> |SS0502<br /> |LANYARD-8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |SS0501<br /> |PIN-QUICK RELEASE-3/16&quot; X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Consult factory for units built prior to November 2013 with plexiglass bolted directly to Overhead Guard structure on front and sides.'' <br /> |}<br /> <br /> ==== '''&lt;big&gt;''Operator Shield (Used Prior to November 2013)''&lt;/big&gt;''' ====<br /> [[File:BE-TS Operator Shield (Used Prior to November 2013).png|alt=BE-TS Operator Shield (Used Prior to November 2013)|frameless|559x559px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43717116<br /> |SHIELD-OPERATOR<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |43015010<br /> |FRAME-OPERATOR SHIELD WELDMENT<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43017066-2<br /> |SUPPORT-SIDE<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |43017065-2<br /> |SUPPORT-LOWER<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43017067-2<br /> |SUPPORT-UPPER<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |7<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |32<br /> |-<br /> |8<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |9<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |16<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Consult factory for units with plexiglass bolted directly to frame.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Powered Roller Cutout&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Powered Roller Cutout Photo Eye &amp; Reflector Locations (Prior to May 2022)&lt;/big&gt;''''' ====<br /> [[File:BE-TS Powered Roller Cutout Photo Eye &amp; Reflector Locations.png|alt=BE-TS Powered Roller Cutout Photo Eye &amp; Reflector Locations|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1321A<br /> |PHOTO EYE<br /> |<br /> |''† Polarized''<br /> |1<br /> |-<br /> |2<br /> |41217170-2<br /> |MOUNT-PHOTO EYE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0216<br /> |SCREW-#10-24 X 2&quot;<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |4<br /> |HW0032<br /> |NUT-NILN-#10-24<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |E1321-R<br /> |REFLECTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |41217171<br /> |MOUNT-REFLECTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |SS0803<br /> |SCREW-RHMS-#6-32 X 5/8&quot;<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |8<br /> |SS0125<br /> |BOLT-HHCS-1/4-20 X 5/8&quot;<br /> |<br /> |''††† See notes''<br /> |4<br /> |-<br /> |9<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''Quantities provided are for Single-Sided (PRC-1) Power Roller Cutout option. For units with Double Sided (PRC-2) option, quantities are double.''<br /> |-<br /> | colspan=&quot;6&quot; |''† Polarized Photo Eye recommended to prevent potential operational issues with very smooth or shiny battery cases.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Photo Eye &amp; Reflector mounting screws are trimmed to length.''<br /> |-<br /> | colspan=&quot;6&quot; |''††† Photo Eye &amp; Reflector Bracket Mounting Screws may be required to ground flush to prevent intereferance with guards.''<br /> |}<br /> '''''&lt;big&gt;Powered Roller Cutout Photo Eye &amp; Reflector Locations (May 2022 to Present)&lt;/big&gt;'''''<br /> <br /> [[File:BE-TS Powered Roller Cutout Photo Eye &amp; Reflector Locations (May 2022 to Present).png|alt=BE-TS Powered Roller Cutout Photo Eye &amp; Reflector Locations (May 2022 to Present)|frameless|555x555px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1321A<br /> |PHOTO EYE<br /> |<br /> |''† Polarized''<br /> |1<br /> |-<br /> |2<br /> |13537001-2<br /> |MOUNT-PHOTO EYE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E1321-R<br /> |REFLECTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |41217171<br /> |MOUNT-REFLECTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |SS0803<br /> |SCREW-RHMS-#6-32 X 5/8&quot;<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |PL0506<br /> |GROMMET-SEALING-2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''Quantities provided are for Single-Sided (PRC-1) Power Roller Cutout option. For units with Double Sided (PRC-2) option, quantities are double.''<br /> |-<br /> | colspan=&quot;6&quot; |''† Polarized Photo Eye recommended to prevent potential operational issues with very smooth or shiny battery cases.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Reflector mounting screws are trimmed to length.''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Powered Roller Cutout Mounting&lt;/big&gt;''''' ====<br /> [[File:BE-TS Powered Roller Cutout Mounting.png|alt=BE-TS Powered Roller Cutout Mounting|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0281<br /> |SOLENOID VALVE<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |BI0001<br /> |NIPPLE-CLOSE-#8 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |6<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |7<br /> |H1600<br /> |ADAPTER-90 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |H1546<br /> |ADAPTER-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Powered Roller Cutout Override Button&lt;/big&gt;''''' ====<br /> [[File:BE-TS Powered Roller Cutout Override Button.png|alt=BE-TS Powered Roller Cutout Override Button|frameless|568x568px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ACTUATOR-PUSH BUTTON (DISCONTINUED)<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |N/A<br /> |CONTACT BLOCK-N/C (DISCONTINUED)<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |3<br /> |E0384<br /> |ACTUATOR-PUSH BUTTON<br /> |80932002<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0386<br /> |CONTACT BLOCK-N/C<br /> |80932002<br /> |<br /> |1<br /> |-<br /> |5<br /> |E0387<br /> |DUMMY BLOCK<br /> |80932002<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0388<br /> |PUSH BUTTON-GREEN<br /> |80932002<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''Button location on dash may vary from position shown.''<br /> |-<br /> | colspan=&quot;6&quot; |''† Parts no longer available. Must order new Push-Button Switch Kit 80932002''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Powered Roller Cutout Junction Box&lt;/big&gt;''''' ====<br /> [[File:BE-TS Powered Roller Cutout Junction Box.png|alt=BE-TS Powered Roller Cutout Junction Box|frameless|535x535px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |3<br /> |-<br /> |4<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |4<br /> |-<br /> |5<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |7<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |''Mounting bolts (Not shown)''<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Level Assist&lt;/u&gt;&lt;/big&gt;''' ===</div>

Kperrier https://tech.bhs1.com/index.php?title=File:BE-TS_Powered_Roller_Cutout_Junction_Box.png&diff=7650 2024-03-13T20:08:25Z

<p>Kperrier: </p> <hr /> <div>BE-TS Powered Roller Cutout Junction Box</div>

Kperrier https://tech.bhs1.com/index.php?title=File:BE-TS_Powered_Roller_Cutout_Override_Button.png&diff=7649 2024-03-13T20:03:58Z

<p>Kperrier: </p> <hr /> <div>BE-TS Powered Roller Cutout Override Button</div>

Kperrier https://tech.bhs1.com/index.php?title=File:BE-TS_Powered_Roller_Cutout_Mounting.png&diff=7648 2024-03-13T20:00:57Z

<p>Kperrier: </p> <hr /> <div>BE-TS Powered Roller Cutout Mounting</div>

Kperrier https://tech.bhs1.com/index.php?title=File:BE-TS_Powered_Roller_Cutout_Photo_Eye_%26_Reflector_Locations_(May_2022_to_Present).png&diff=7647 2024-03-13T19:49:04Z

<p>Kperrier: </p> <hr /> <div>BE-TS Powered Roller Cutout Photo Eye &amp; Reflector Locations (May 2022 to Present)</div>

Kperrier https://tech.bhs1.com/index.php?title=File:BE-TS_Powered_Roller_Cutout_Photo_Eye_%26_Reflector_Locations.png&diff=7646 2024-03-13T19:45:53Z

<p>Kperrier: </p> <hr /> <div>BE-TS Powered Roller Cutout Photo Eye &amp; Reflector Locations</div>

Kperrier https://tech.bhs1.com/index.php?title=File:BE-TS_Operator_Shield_(Used_Prior_to_November_2013).png&diff=7645 2024-03-13T19:43:28Z

<p>Kperrier: </p> <hr /> <div>BE-TS Operator Shield (Used Prior to November 2013)</div>

Kperrier https://tech.bhs1.com/index.php?title=File:(Current)_BE-TS_30_Operator_Sheild.png&diff=7644 2024-03-13T19:38:15Z

<p>Kperrier: </p> <hr /> <div>(Current) BE-TS 30 Operator Sheild</div>

Kperrier https://tech.bhs1.com/index.php?title=File:BE-TS_Overhead_Guard.png&diff=7643 2024-03-13T19:34:32Z

<p>Kperrier: </p> <hr /> <div>BE-TS Overhead Guard</div>

Kperrier https://tech.bhs1.com/index.php?title=File:BE-TS_Horn.png&diff=7642 2024-03-13T19:33:14Z

<p>Kperrier: </p> <hr /> <div>BE-TS Horn</div>

Kperrier https://tech.bhs1.com/index.php?title=File:BE-TS_Strobe_and_Alarm_Mounting.png&diff=7641 2024-03-13T19:30:26Z

<p>Kperrier: </p> <hr /> <div>BE-TS Strobe and Alarm Mounting</div>

Kperrier https://tech.bhs1.com/index.php?title=File:(Current)_BE-TS_Stack_Light_Strobe_and_Alarm_Configuration.png&diff=7640 2024-03-13T19:18:16Z

<p>Kperrier: </p> <hr /> <div>(Current) BE-TS Stack Light Strobe and Alarm Configuration</div>

Kperrier https://tech.bhs1.com/index.php?title=File:(Discontinued)_BE-TS_Audible_Alarm.png&diff=7639 2024-03-13T19:08:52Z

<p>Kperrier: </p> <hr /> <div>(Discontinued) BE-TS Audible Alarm</div>

Kperrier https://tech.bhs1.com/index.php?title=File:(Discontinued)_BE-TS_Strobe_Light.png&diff=7638 2024-03-13T19:07:28Z

<p>Kperrier: </p> <hr /> <div>(Discontinued) BE-TS Strobe Light</div>

Kperrier https://tech.bhs1.com/index.php?title=(BE-TS)_Triple_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-401)&diff=7637 2024-03-13T18:34:17Z

<p>Kperrier: Added Hydraulics Section</p> <hr /> <div>'''Looking for a specific replacement part?''' Ctrl-F (or Command-F for Mac users) brings up your browsers search panel and can search any text on the entire web page. Find parts by searching a part # or part description.<br /> <br /> '''Register your equipment with [https://na.bhs1.com/media-library/bhs-optima/ BHS Optima], BHS's free app.'''<br /> <br /> '''California Residents''': WARNING: This product contains chemicals known to the State of California to cause cancer and/or reproductive harm, and birth defects or other reproductive harm. [https://na.bhs1.com/about-bhs/compliance-statement-for-california-proposition-65/ Learn more here.]<br /> =&lt;big&gt;Preface&lt;/big&gt;=<br /> =&lt;big&gt;TP-606 – Safety &amp; De-Energization Procedures&lt;/big&gt;=<br /> ==&lt;big&gt;General Safety&lt;/big&gt;==<br /> {|<br /> |[[File:Read Before Operating Notice.png|alt=Read Before Operating|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:Read_Before_Operating_Notice.png]]<br /> |<br /> *Read and understand all instructions and warnings before using or servicing this equipment.<br /> *Keep these instructions for future reference.<br /> |}<br /> *Battery Extractor (BE) units shall only be operated by suitable persons of at least 18 years of age, who have been trained in the proper and safe operation of the BE and expressly certified/charged, in writing, by the user or their representative.<br /> *Only one person is permitted to travel on the BE at any time.<br /> *BE units shall only be used indoors in an industrial setting on a hard, nonslip, and level floor without defects including but not limited to holes, gouges, cracks, drains or obstacles comprised of concrete or other suitable industrial material meeting the minimum requirements specified by BHS as well as any local requirements.<br /> *A licensed structural engineer should be consulted prior to installing a BE on any building level other than the ground floor.<br /> *BE units are not designed to be shipped or transported after initial delivery.<br /> *Failure to follow these instructions and warnings may result in property damage, personal injury or death.<br /> ===&lt;big&gt;&lt;u&gt;Work Area&lt;/u&gt;&lt;/big&gt;===<br /> *Keep work area clean and well lit. Cluttered work areas and poor lighting can lead to accidents.<br /> *Clean up/contain any fluid spills immediately to prevent slips or falls.<br /> *Be aware of potential hazards when performing any service or maintenance to the unit.<br /> ===&lt;big&gt;&lt;u&gt;Service &amp; Maintenance&lt;/u&gt;&lt;/big&gt;===<br /> Service personnel shall wear Personal Protective Equipment (PPE) appropriate for the task being performed.<br /> {|<br /> |[[File:Electrical Hazard Warning.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Electrical_Hazard_Warning.png]]<br /> [[File:Danger Warning.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Danger_Warning.png|alt=DANGER]]<br /> |<br /> ===&lt;big&gt;&lt;u&gt;Lockout/Tagout&lt;/u&gt;&lt;/big&gt;===<br /> '''Lockout/tagout the BE per your corporate policy, if damaged or not functioning properly. Lockout/tagout and de-energize all systems prior to performing any maintenance or service to unit.'''<br /> |}<br /> {|<br /> |[[File:Warning-Battery-Explosion.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Warning-Battery-Explosion.png]]<br /> [[File:Danger Warning.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Danger_Warning.png|alt=DANGER]]<br /> |<br /> ===&lt;big&gt;&lt;u&gt;Lead-Acid Battery Explosion Hazard&lt;/u&gt;&lt;/big&gt;===<br /> '''DO NOT allow open flames or sparks of any kind near a battery. Highly explosive gas is generated when charging a battery that can remain in battery cells for extended periods of time after charging is complete.'''<br /> *Always wear appropriate PPE including rubber apron, gloves, boots and full face shield when performing service or maintenance to any lead-acid batteries.<br /> *DO NOT place metal or other conductive objects on top of battery. Arcing may occur causing damage to the battery and/or serious personal injury or death.<br /> *Use only chargers matching the voltage and amperage of the battery being charged. Overcharging a battery can cause damage to the battery, charger and/or serious personal injury or death.<br /> *Turn off charger before disconnecting battery from charger. Arcing between battery and charger connectors can cause damage to the connectors and/or serious personal injury or death.<br /> |}<br /> {|<br /> |[[File:Warning-Hydrualic-Hazard.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Warning-Hydrualic-Hazard.png]]<br /> [[File:Warning.png|alt=WARNING|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Warning.png]]<br /> |<br /> ===&lt;big&gt;&lt;u&gt;Hydraulic Hazards&lt;/u&gt;&lt;/big&gt;===<br /> '''AVOID HIGH PRESSURE FLUIDS-Escaping fluid under pressure can penetrate the skin causing serious injury. Relieve pressure before disconnecting hydraulic lines. Tighten all connections before applying pressure. Keep hands and body away from pin holes which eject fluids under high pressure. Use a piece of cardboard or paper to search for leaks. DO NOT use your hand.'''<br /> <br /> '''Any fluid injected into the skin under high pressure should be considered a serious medical emergency despite an initial normal appearance of the skin. There will be a delayed onset of pain, and serious tissue damage may occur. Medical attention should be sought immediately.'''<br /> |}<br /> {|<br /> ![[File:No Pacemakers Notice.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:No_Pacemakers_Notice.png]][[File:Strong Magnet Field Hazard Warning.png|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Strong_Magnet_Field_Hazard_Warning.png]]<br /> [[File:Warning.png|alt=WARNING|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Warning.png]]<br /> |<br /> ===&lt;big&gt;&lt;u&gt;Electromagnet Hazard&lt;/u&gt;&lt;/big&gt;===<br /> '''Units equipped with magnetic extraction generate strong magnetic fields. Persons with pacemakers &lt;u&gt;SHOULD&lt;/u&gt;''' &lt;u&gt;'''NOT'''&lt;/u&gt; '''operate or be in close proximity to equipment during operation.'''<br /> <br /> '''Failure to comply with this direction''' '''could result in serious personal injury or death.'''<br /> |}<br /> ===&lt;big&gt;&lt;u&gt;Operational Safety&lt;/u&gt;&lt;/big&gt;===<br /> *Only personnel trained in the proper and safe operation of BE units may operate or service the BE.<br /> *Operators shall wear appropriate PPE suitable for working with industrial lead-acid batteries while operating the BE ''(See [https://tech.bhs1.com/index.php/(BE-SL_%26_-DS)_Single_Level_%26_Double_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-400)#Lead-Acid_Battery_Explosion_Hazard Lead-Acid Battery Explosion Hazard] section).''<br /> *All data plates, warning labels, placards, etc. shall be in place and legible at all times. Contact BHS for re-placement data plates, warning labels, placards or instructions.<br /> *All users and service personnel shall be familiar with the meaning and risks associated with all data plates, warning labels, etc.<br /> *All operators and service personnel shall be aware of potential crush and shear points while operating or servicing the BE.<br /> *Keep hands and arms inside the operator compartment while operating the BE.<br /> *Remove BE from service if damaged, defective, or operating improperly (or becomes such while operating) until repairs can be made to correct any problem(s).<br /> *All operators shall be aware of the location of the end stops in the travel path to prevent driving the BE into the end stops.<br /> ===&lt;u&gt;&lt;big&gt;Do's and Don'ts&lt;/big&gt;&lt;/u&gt;===<br /> *'''DO NOT''' exceed the maximum capacity of the BE.<br /> *'''DO NOT''' modify or fit the BE with attachments without prior, written approval from BHS.<br /> *'''DO NOT''' perform any maintenance or service to the BE with a battery loaded on the BE.<br /> *'''DO NOT''' allow anyone to ride in or on the BE.<br /> *'''DO NOT''' operate the BE with any guard or cover removed unless required for maintenance or repair.<br /> *Disconnect the BE from all power sources before attempting to perform service or maintenance to the unit.<br /> *'''DO NOT''' drive the BE into the end stops.<br /> *'''DO NOT''' operate the BE if disengaged from the guidance track.<br /> *'''DO NOT''' allow a battery to exit the BE when a lift truck or battery stand is not present to accept the battery.<br /> *'''DO NOT''' rotate the arm onto a battery such that any part of the extractor arm, vacuum cup or magnet contacts the top of the battery.<br /> *'''DO NOT''' allow anyone to enter the area under the carriage without the service stands properly installed.<br /> *'''DO NOT''' use the BE in a manner for which it is not intended. Some examples of prohibited use are but not limited to:<br /> **To transport people<br /> **As a vehicle jack<br /> **To lift loads greater than its rated load capacity<br /> **Where unintentional movement may exist<br /> **Having direct contact with foodstuffs<br /> **In a potentially explosive atmosphere<br /> ==&lt;big&gt;De-Energization&lt;/big&gt;==<br /> 1. Fully lower the BE roller bed or position the roller bed on service stands if service requires the bed be raised. See Figures 1 &amp; 2.<br /> {|<br /> |[[File:WARNING-warn.png|alt=WARNING|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:WARNING-warn.png]]<br /> !Failure to properly support the roller bed when performing service under the BE could result in injury from the roller bed lowering unexpectedly.<br /> |}[[File:IOP-400 BE-SL&amp;DS (10-23) Fully Lower BE Roller Bed.png|alt=Fully lowered BE roller bed|none|thumb|FIGURE 1|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Fully_Lower_BE_Roller_Bed.png]][[File:IOP-400 BE-SL&amp;DS (10-23) BE Roller Bed on Service Stands .png|alt=Raised BE roller bed positioned on service stands|none|thumb|FIGURE 2|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_BE_Roller_Bed_on_Service_Stands_.png]]2. Turn key on dashboard to the “OFF” position. See Figure 3.[[File:IOP-400 BE-SL&amp;DS (10-23) De-Energization Figure 3.png|alt=Key on BE dashboard turned to the “OFF” position.|none|thumb|FIGURE 3|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_De-Energization_Figure_3.png]]3. Disconnect power to the extractor or shut off the electrical branch circuit breaker.<br /> {|<br /> |[[File:Danger Warning.png|alt=DANGER|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:Danger_Warning.png]]<br /> |'''Failure to disconnect electrical power to the BE could result in electrical shock. Serious personal injury or death will occur.'''<br /> |}4. Actuate all hydraulic levers in both directions to re-lease any stored hydraulic pressure. See Figure 4.<br /> {|<br /> |[[File:WARNING-warn.png|alt=WARNING|frameless|100x100px|link=https://tech.bhs1.com/index.php/File:WARNING-warn.png]]<br /> |'''Failure to release any stored hydraulic pres-sure could result in injury from:'''<br /> *'''Escaping hydraulic fluid under high pressure (see ''[https://tech.bhs1.com/index.php/(BE-SL_%26_-DS)_Single_Level_%26_Double_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-400)#Operational_Safety HYDRAULIC HAZARDS]'' in the ''[https://tech.bhs1.com/index.php/(BE-SL_%26_-DS)_Single_Level_%26_Double_Stack_Operator_Aboard_Battery_Extractors_%E2%80%93_Parts_%26_Service_Manual_(IOP-400)#General_Safety GENERAL SAFETY]'' section).'''<br /> *'''Unexpected movement of hydraulic components.'''<br /> |}[[File:IOP-400 BE-SL&amp;DS (10-23) Actuate all Hydraulic Levers in Both Directions.png|alt=Actuate all hydraulic levers in both directions to release any stored hydraulic pressure.|none|thumb|FIGURE 4|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Actuate_all_Hydraulic_Levers_in_Both_Directions.png]]<br /> ==&lt;big&gt;Labels &amp; Placards&lt;/big&gt;==<br /> '''Operators should be familiar with the meaning of the following labels and placards found on the BE to ensure proper and safe operation.'''<br /> {| class=&quot;wikitable&quot;<br /> |-<br /> ![[File:Read Before Operating Notice.png|alt=Read Before Operating|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Read_Before_Operating_Notice.png]]<br /> |'''Read and understand instruction manual prior to use.'''<br /> |-<br /> ![[File:Lockout-Before-Servicing-Notice.png|alt=Lockout Before Servicing Unit|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Lockout-Before-Servicing-Notice.png]]<br /> |'''Lockout before servicing.'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Extractor Arm Positioning Arrows.png|alt=BE-SL &amp; BE-DS Extractor Arm Positioning Arrows|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Extractor_Arm_Positioning_Arrows.png]]<br /> |'''Extractor arm positioning arrows'''<br /> |-<br /> ![[File:Do Not Operate Without Guards or Covers Notice.png|alt=DO NOT Operate Without Guards or Covers Notice|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Do_Not_Operate_Without_Guards_or_Covers_Notice.png]]<br /> |'''DO NOT operate with guards or covers removed'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) No Riders Allowed.png|alt=No riders allowed|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_No_Riders_Allowed.png]]<br /> |'''NO riders allowed.'''<br /> |-<br /> ![[File:No Pacemakers Notice.png|alt=DO NOT operate by or in close proximity to people with pacemakers.|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:No_Pacemakers_Notice.png]]<br /> |'''DO NOT operate by or in close proximity to people with pacemakers.'''<br /> |-<br /> ![[File:Strong Magnet Field Hazard Warning.png|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Strong_Magnet_Field_Hazard_Warning.png]]<br /> [[File:Warning.png|alt=WARNING|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Warning.png]]<br /> |'''Strong Magnet Field Hazard'''<br /> *Attraction between magnet and metallic objects can crush.<br /> *Keep unsecured metallic objects away from magnet.<br /> *De-energize and lockout/tagout before servicing.<br /> |-<br /> ![[File:Chain Entanglement Hazard Warning.png|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Chain_Entanglement_Hazard_Warning.png]]<br /> [[File:Warning.png|alt=WARNING|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Warning.png]]<br /> |'''Chain Entanglement Hazard'''<br /> *Moving chains and sprockets can crush and cut.<br /> *Keep hands and fingers clear. Do not operate with guards removed.<br /> *De-energize and lockout/tagout before servicing.<br /> |-<br /> ![[File:Electrical Hazard Warning.png|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Electrical_Hazard_Warning.png]]<br /> [[File:Danger Warning.png|alt=DANGER|frameless|150x150px|link=https://tech.bhs1.com/index.php/File:Danger_Warning.png]]<br /> |'''Electrical Hazard'''<br /> *Energized components can cause electrical shock.<br /> *De-energize and lockout/tagout before servicing.<br /> |-<br /> ![[File:BE-SL and BE-DS Power Off-On.png|alt=BE-SL and BE-DS Power Off-On|frameless|180x180px|link=https://tech.bhs1.com/index.php/File:BE-SL_and_BE-DS_Power_Off-On.png]]<br /> |'''Power Off/On'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Horn Control.png|alt=BE-SL and BE-DS Horn Control |frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Horn_Control.png]]<br /> |'''Horn (If equipped)'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Vacuum Control.png|alt=BE-SL and BE-DS Vacuum Control |frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Vacuum_Control.png]]<br /> |'''Vacuum Off/On (If equipped)'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Magnet Extraction.png|alt=BE-SL and BE-DS Magnet Off/On|frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Magnet_Extraction.png]]<br /> |'''Magnet Off/On (If equipped)'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Powered Roller Cut Off Override.png|alt=BE-SL and BE-DS Powered Roller Cut Off Override|frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Powered_Roller_Cut_Off_Override.png]]<br /> |'''Powered Roller Cutout Override (If equipped)'''<br /> |-<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) Rack-Level-Assist.png|alt=BE-SL and BE-DS Rack Level Assist |frameless|180x180px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Rack-Level-Assist.png]]<br /> |'''Rack Level Assist Indicator (If equipped)'''<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> ! rowspan=&quot;3&quot; |[[File:IOP-400_BE-SL&amp;DS_(10-23)_Power_Rollers_and_Arm_Travel.png.png|alt=BE-SL &amp; DS Powered Roller and Arm Travel Controls|frameless|504x504px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Power_Rollers_and_Arm_Travel.png.png]]<br /> |'''Far Power Rollers'''<br /> |-<br /> |'''Arm Travel'''<br /> |-<br /> |'''Near Power Rollers'''<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> |+''BE-SL &amp; DS UNITS ONLY''<br /> ! colspan=&quot;3&quot; |[[File:IOP-400 BE-SL&amp;DS (10-23) BE-SL&amp;DS Units Platform Controls.png|alt=BE-SL &amp; DS Specific Controls|frameless|460x460px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_BE-SL&amp;DS_Units_Platform_Controls.png]]<br /> |-<br /> |Drive Forward/Reverse<br /> |Platform Raise/Lower<br /> |Arm Rotation Near/Far<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> |+''BE-TS &amp; QS UNITS ONLY''<br /> ![[File:IOP-400 BE-SL&amp;DS (10-23) BE-TS &amp; BE-QS Platform Raise and Lower Controls.png|alt=BE-TS &amp; BE-QS Platform Raise and Lower Controls|frameless|240x240px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_BE-TS_&amp;_BE-QS_Platform_Raise_and_Lower_Controls.png]]<br /> ! colspan=&quot;2&quot; |[[File:IOP-400 BE-SL&amp;DS (10-23)BE-TS &amp; BE-QS Specific Controls.png|alt=BE-TS &amp; BE-QS Specific-Controls|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)BE-TS_&amp;_BE-QS_Specific_Controls.png]]<br /> |-<br /> |Platform Raise/Lower<br /> |Drive Foward/Reverse<br /> |Arm Rotation Near/Far<br /> |}<br /> =&lt;big&gt;General Information&lt;/big&gt;=<br /> ==&lt;big&gt;Specification Data&lt;/big&gt;==<br /> [[File:BE-TS Specification Data.png|alt=IOP-401 BE-TS (10-23) Specification Data|frameless|600x600px]]<br /> {| class=&quot;wikitable&quot;<br /> | colspan=&quot;2&quot; |<br /> !BE-24-2-TS<br /> !BE-36-2-TS<br /> !BE-42-2-TS<br /> |-<br /> !A<br /> |Overall Length<br /> |156.5&quot;<br /> |180.5&quot;<br /> |192.5&quot;<br /> |-<br /> !B<br /> |Overall Width<br /> |72&quot;<br /> |72&quot;<br /> |72&quot;<br /> |-<br /> !C<br /> |Overall Height (Lowered)<br /> |158.188&quot;<br /> |158.188&quot;<br /> |160.688&quot;<br /> |-<br /> !<br /> |Overall Height (Raised w/ Overhead Guard)<br /> |182.375&quot;<br /> |182.375&quot;<br /> |182.375&quot;<br /> |-<br /> !<br /> |Overall Height (Raised w/ Strobe &amp; Alarm)<br /> |191.75&quot;<br /> |191.75&quot;<br /> |191.75&quot;<br /> |-<br /> !D<br /> |Wheel Base<br /> |98&quot;<br /> |122&quot;<br /> |134&quot;<br /> |-<br /> !E<br /> |Drive Wheel Center line<br /> |51&quot;<br /> |51&quot;<br /> |51&quot;<br /> |-<br /> !F<br /> |Battery Compartment Width<br /> |24&quot;<br /> |36&quot;<br /> |42&quot;<br /> |-<br /> !G<br /> |Ground Clearance<br /> |.625&quot;<br /> |.625&quot;<br /> |.625&quot;<br /> |-<br /> !H<br /> |Minimum Roller Height<br /> |6.5&quot;<br /> |6.5&quot;<br /> |6.5&quot;<br /> |-<br /> !I<br /> |Maximum Roller Height<br /> |96&quot;<br /> |96&quot;<br /> |96&quot;<br /> |-<br /> !J<br /> |Operator Platform Height (Lowered/Raised)<br /> |11&quot; / 103&quot;<br /> |11&quot; / 103&quot;<br /> |11&quot; / 103&quot;<br /> |}<br /> <br /> === UNITS WITH 10 HP POWER UNIT USED PRIOR TO DECEMBER, 2014 ===<br /> {| class=&quot;wikitable&quot;<br /> !<br /> !BE-24-2-TS<br /> !BE-36-2-TS<br /> !BE-42-2-TS<br /> |-<br /> |Travel Speed<br /> |0 to 190 ft/min / 0 to 0.97 m/s<br /> |0 to 190 ft/min / 0 to 0.97 m/s<br /> |0 to 190 ft/min / 0 to 0.97 m/s<br /> |-<br /> |Raise - Lower Speed<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |-<br /> |Powered Roller Speed<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |-<br /> |Arm Traverse Speed<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |-<br /> |Arm Rotation Time<br /> |6 s to 8 s<br /> |6 s to 8 s<br /> |6 s to 8 s<br /> |-<br /> |Draw Bar Pull / Vacuum<br /> <br /> (12&quot; / 305 mm Round Cup)<br /> |1,000 lb / 454 kg<br /> |1,000 lb / 454 kg<br /> |1,000 lb / 454 kg<br /> |-<br /> |Draw Bar Pull Magnet*<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |-<br /> |Vacuum Attach Time<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |-<br /> |Vacuum Release Time<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |-<br /> |Input Voltage<br /> |480 V / 3 ph / 60Hz<br /> |480 V / 3 ph / 60Hz<br /> |480 V / 3 ph / 60Hz<br /> |-<br /> |AC Current Draw<br /> |16.5 A<br /> |16.5 A<br /> |16.5 A<br /> |-<br /> |Control Circuit Voltage<br /> |120 V ac<br /> |120 V ac<br /> |120 V ac<br /> |-<br /> |Hydraulic Power Unit<br /> |10 hp / 7.46 kW<br /> |10 hp / 7.46 kW<br /> |10 hp / 7.46 kW<br /> |-<br /> |Hydraulic Pump<br /> |16 gal/min / 61 L/min<br /> |16 gal/min / 61 L/min<br /> |16 gal/min / 61 L/min<br /> |-<br /> |Power Unit<br /> |Hydraulic, Variable Displacement<br /> |Hydraulic, Variable Displacement<br /> |Hydraulic, Variable Displacement<br /> |-<br /> |Operating Pressure<br /> |1,500 psi / 103 bar<br /> |1,500 psi / 103 bar<br /> |1,500 psi / 103 bar<br /> |-<br /> |Vacuum Pump<br /> |1/3 hp / 0.25 kW<br /> |1/3 hp / 0.25 kW<br /> |1/3 hp / 0.25 kW<br /> |-<br /> |Vacuum<br /> |21&quot; Hg / 711 mbar<br /> |21&quot; Hg / 711 mbar<br /> |21&quot; Hg / 711 mbar<br /> |-<br /> |Full Load Capacity<br /> |10,000 lb / 4535 kg<br /> |10,000 lb / 4535 kg<br /> |10,000 lb / 4535 kg<br /> |-<br /> |Weight (Empty)<br /> |8,000 lb / 3629 kg<br /> |8,300 lb / 3765 kg<br /> |8,600 lb / 3901 kg<br /> |-<br /> |Total Compartment Rollers / Powered<br /> |11/5<br /> |11/5<br /> |11/5<br /> |-<br /> |Guide Track<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |-<br /> |Overall Dimensions (L x W x H)<br /> |156.5&quot; x 72&quot; x 158.188&quot;<br /> <br /> 3975 mm x 1829 mm x 4018 mm<br /> |180.5&quot; x 72&quot; x 158.188&quot;<br /> <br /> 4585 mm x 1829 mm x 4018 mm<br /> |192.5&quot; x 72&quot; x 160.688&quot;<br /> <br /> 4890 mm x 1829 mm x 4081 mm<br /> |-<br /> |Vacuum Arm Reach<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |-<br /> |Vacuum Arm Reach (Hydraulic Extension)<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |-<br /> |Magnet Arm Reach (Hydraulic Extension) Truck Side<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |-<br /> |Wheel Base<br /> |98&quot; / 2489 mm<br /> |122&quot; / 3099 mm<br /> |134&quot; / 3404 mm<br /> |-<br /> |Drive Wheel Center Line<br /> |51&quot; / 1295 mm<br /> |51&quot; / 1295 mm<br /> |51&quot; / 1295 mm<br /> |-<br /> |Battery Compartment Width<br /> |24&quot; / 610 mm<br /> |36&quot; / 915 mm<br /> |42&quot; / 1067 mm<br /> |-<br /> |Maximum Battery Dimensions<br /> <br /> (L x W x H)<br /> |48&quot; x 23&quot; x 34&quot;<br /> <br /> 1219 mm x 584 mm x 864 mm<br /> |48&quot; x 35&quot; x 34&quot;<br /> <br /> 1219 mm x 889 mm x 864 mm<br /> |48&quot; x 41&quot; x 34&quot;<br /> <br /> 1219 mm x 1041 mm x 864 mm<br /> |-<br /> |Minimum Battery Width<br /> <br /> (with vacuum / magnet)<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |-<br /> |Minimum Battery Height<br /> |17.75&quot; / 451 mm<br /> |17.75&quot; / 451 mm<br /> |17.75&quot; / 451 mm<br /> |-<br /> |Ground Clearance<br /> |0.63&quot; / 16 mm<br /> |0.63&quot; / 16 mm<br /> |0.63&quot; / 16 mm<br /> |-<br /> |Roller Height<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |-<br /> ! colspan=&quot;4&quot; |NOTES<br /> |-<br /> | colspan=&quot;4&quot; |''Specifications may vary ± 5% because of temperature, floor considerations, and operator efficiency. Values represented under normal operating conditions.''<br /> |-<br /> | colspan=&quot;4&quot; |''* Varies with battery case thickness and condition.''<br /> |}<br /> <br /> === UNITS WITH 20 HP POWER UNIT USED DECEMBER, 2014 TO PRESENT ===<br /> {| class=&quot;wikitable&quot;<br /> !<br /> !BE-24-2-TS<br /> !BE-36-2-TS<br /> !BE-42-2-TS<br /> |-<br /> |Travel Speed<br /> |0 to 240 ft/min / 0 to 1.22 m/s<br /> |0 to 240 ft/min / 0 to 1.22 m/s<br /> |0 to 240 ft/min / 0 to 1.22 m/s<br /> |-<br /> |Raise - Lower Speed<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |0 to 26 ft/min / 0 to 0.13 m/s<br /> |-<br /> |Powered Roller Speed<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |0 to 37 ft/min / 0 to 0.19 m/s<br /> |-<br /> |Arm Traverse Speed<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |0 to 20 ft/min / 0 to 0.10 m/s<br /> |-<br /> |Arm Rotation Time<br /> |6 s to 8 s<br /> |6 s to 8 s<br /> |6 s to 8 s<br /> |-<br /> |Draw Bar Pull / Vacuum<br /> <br /> (12&quot; / 305 mm Round Cup)<br /> |1,000 lb / 454 kg<br /> |1,000 lb / 454 kg<br /> |1,000 lb / 454 kg<br /> |-<br /> |Draw Bar Pull Magnet*<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |800 lb to 1,200 lb / 363 to 544 kg<br /> |-<br /> |Vacuum Attach Time<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |-<br /> |Vacuum Release Time<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |&lt; 1 s<br /> |-<br /> |Input Voltage<br /> |480 V / 3 ph / 60Hz<br /> |480 V / 3 ph / 60Hz<br /> |480 V / 3 ph / 60Hz<br /> |-<br /> |AC Current Draw<br /> |35 A<br /> |35 A<br /> |35 A<br /> |-<br /> |AC Current Draw w/ Electric Drive Option<br /> |42 A<br /> |42 A<br /> |42 A<br /> |-<br /> |Control Circuit Voltage<br /> |120 V ac<br /> |120 V ac<br /> |120 V ac<br /> |-<br /> |Hydraulic Power Unit<br /> |20 hp / 14.9 kW<br /> |20 hp / 14.9 kW<br /> |20 hp / 14.9 kW<br /> |-<br /> |Hydraulic Power Unit w/ Electric Drive Option<br /> |25 hp / 18.7 kW<br /> |25 hp / 18.7 kW<br /> |25 hp / 18.7 kW<br /> |-<br /> |Hydraulic Pump<br /> |22 gal/min / 83 L/min<br /> |22 gal/min / 83 L/min<br /> |22 gal/min / 83 L/min<br /> |-<br /> |Power Unit<br /> |Hydraulic, Variable Displacement<br /> |Hydraulic, Variable Displacement<br /> |Hydraulic, Variable Displacement<br /> |-<br /> |Operating Pressure<br /> |1,500 psi / 103 bar<br /> |1,500 psi / 103 bar<br /> |1,500 psi / 103 bar<br /> |-<br /> |Vacuum Pump<br /> |1/3 hp / 0.25 kW<br /> |1/3 hp / 0.25 kW<br /> |1/3 hp / 0.25 kW<br /> |-<br /> |Vacuum<br /> |21&quot; Hg / 711 mbar<br /> |21&quot; Hg / 711 mbar<br /> |21&quot; Hg / 711 mbar<br /> |-<br /> |Full Load Capacity<br /> |10,000 lb / 4535 kg<br /> |10,000 lb / 4535 kg<br /> |10,000 lb / 4535 kg<br /> |-<br /> |Weight (Empty)<br /> |8,000 lb / 3629 kg<br /> |8,300 lb / 3765 kg<br /> |8,600 lb / 3901 kg<br /> |-<br /> |Total Compartment Rollers / Powered<br /> |11/5<br /> |11/5<br /> |11/5<br /> |-<br /> |Guide Track<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |3&quot; x 2.5&quot; Angle<br /> <br /> 76 mm x 64 mm<br /> |-<br /> |Overall Dimensions (L x W x H)<br /> |156.5&quot; x 72&quot; x 158.188&quot;<br /> <br /> 3975 mm x 1829 mm x 4018 mm<br /> |180.5&quot; x 72&quot; x 158.188&quot;<br /> <br /> 4585 mm x 1829 mm x 4018 mm<br /> |192.5&quot; x 72&quot; x 160.688&quot;<br /> <br /> 4890 mm x 1829 mm x 4081 mm<br /> |-<br /> |Vacuum Arm Reach<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |4.5&quot; to 14&quot; / 114 mm to 356 mm<br /> |-<br /> |Vacuum Arm Reach (Hydraulic Extension)<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |9&quot; to 23&quot; / 229 mm to 584 mm<br /> |-<br /> |Magnet Arm Reach (Hydraulic Extension) Truck Side<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |14&quot; to 22&quot; / 355 mm to 559 mm<br /> |-<br /> |Wheel Base<br /> |98&quot; / 2489 mm<br /> |122&quot; / 3099 mm<br /> |134&quot; / 3404 mm<br /> |-<br /> |Drive Wheel Center Line<br /> |51&quot; / 1295 mm<br /> |51&quot; / 1295 mm<br /> |51&quot; / 1295 mm<br /> |-<br /> |Battery Compartment Width<br /> |24&quot; / 610 mm<br /> |36&quot; / 915 mm<br /> |42&quot; / 1067 mm<br /> |-<br /> |Maximum Battery Dimensions<br /> <br /> (L x W x H)<br /> |48&quot; x 23&quot; x 34&quot;<br /> <br /> 1219 mm x 584 mm x 864 mm<br /> |48&quot; x 35&quot; x 34&quot;<br /> <br /> 1219 mm x 889 mm x 864 mm<br /> |48&quot; x 41&quot; x 34&quot;<br /> <br /> 1219 mm x 1041 mm x 864 mm<br /> |-<br /> |Minimum Battery Width<br /> <br /> (with vacuum / magnet)<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |12&quot; / 305 mm<br /> <br /> 6&quot; / 152 mm<br /> |-<br /> |Minimum Battery Height<br /> |17.75&quot; / 451 mm<br /> |17.75&quot; / 451 mm<br /> |17.75&quot; / 451 mm<br /> |-<br /> |Ground Clearance<br /> |0.63&quot; / 16 mm<br /> |0.63&quot; / 16 mm<br /> |0.63&quot; / 16 mm<br /> |-<br /> |Roller Height<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |6.5&quot; Min / 96&quot; Max<br /> <br /> 165 mm Min / 2438 mm Max<br /> |-<br /> ! colspan=&quot;4&quot; |NOTES<br /> |-<br /> | colspan=&quot;4&quot; |''Specifications may vary ± 5% because of temperature, floor considerations, and operator efficiency. Values represented under normal operating conditions.''<br /> |-<br /> | colspan=&quot;4&quot; |''* Varies with battery case thickness and condition.''<br /> |}<br /> ==&lt;big&gt;Pre-Installation Check&lt;/big&gt;==<br /> ===&lt;big&gt;&lt;u&gt;Floor Conditions&lt;/u&gt;&lt;/big&gt;===<br /> The floor is the single most critical area of the battery room.  A bad floor can cause significant issues with the installation as well as downtime and maintenance problems with the extractor.  The floor should be verified as to its minimum thickness and strength with user.  As noted on the drawing, the specific requirement of flatness for your particular type of system is listed. Below is a chart stating floor requirements.  If possible, especially on double stack and higher systems, a digital level should be used to shoot the grade for compliance with the specification.  The floor should also be inspected for severe cracks or excessively wide expansion joints in the travel path of the machine.  If floor drains are present, they must not have a grade to the opening that encroaches into the travel path. <br /> <br /> F-min is a rating method used to evaluate the flatness and levelness of a floor designated as &quot;defined travel path&quot;.  For example, an F-min rating of 60 means that there is no more than .129&quot; of variation in the transverse axis (wheels left to right) and .287&quot; variation in the longitudinal axis (front to back) on the equipment.<br /> <br /> To avoid potential damage to drive wheel assemblies, guide track, structural components, guide rollers  and issues with the inner frame equalization the &quot;defined travel path&quot; of the Battery Extractor should meet or exceed the recommended F-min specification. See chart below for the model specifications.<br /> {| class=&quot;wikitable&quot;<br /> !Model<br /> !F-Min<br /> !+/- Longitudinal<br /> !+/- Transverse<br /> !Slope Defect<br /> |-<br /> |SL, DS<br /> |40<br /> |.287&quot;<br /> |.192&quot;<br /> |.096&quot;<br /> |-<br /> |TS<br /> |60<br /> |.186&quot;<br /> |.129&quot;<br /> |.066&quot;<br /> |-<br /> |QS<br /> |85<br /> |.131&quot;<br /> |.091&quot;<br /> |.047&quot;<br /> |}[[File:IOP-400 BE-SL&amp;DS (10-23) Floor Conditions Pre-Installation Check.png|alt=BE-TS Floor Conditions Pre-Installation Check|frameless|500x500px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Floor_Conditions_Pre-Installation_Check.png]]<br /> ==&lt;big&gt;Operating Controls &amp; Instructions&lt;/big&gt;==<br /> <br /> === &lt;big&gt;&lt;u&gt;Operator Console&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Operator Console.png|alt=BE-TS Operator Console|frameless|1080x1080px]]<br /> <br /> '''''NOTE:''' Safety devices for the machine and the machine operating area SHALL NOT be rendered inoperable or misused.'' <br /> <br /> ''Typical BE-TS operator console shown above. Position of optional controls may vary from that shown depending on age of unit and/or combination of optional controls present.''<br /> <br /> ''HMI display standard on units shipped after February, 2020 for Industrial Internet of Things (IIoT) package.''<br /> <br /> ==== &lt;u&gt;&lt;big&gt;Safety Features&lt;/big&gt;&lt;/u&gt; ====<br /> &lt;u&gt;Key Switch&lt;/u&gt; – Located on the dash (see above).  Primary on/off switch to prevent unauthorized personnel from operating the BE.<br /> <br /> &lt;u&gt;Emergency Stop&lt;/u&gt; – Located on the dash (see above). Will stop all functions immediately, locking all hydraulics in place. To use, press down on the red button. The machine key must be used to reset the emergency stop.<br /> <br /> &lt;u&gt;Foot Switch&lt;/u&gt; – Must be depressed to operate the BE.  Stepping off the foot switch will stop all functions immediately, locking all hydraulics in place.  To resume use, depress the foot switch.<br /> <br /> &lt;u&gt;Gate Switch&lt;/u&gt; – The gate must be fully closed for the BE to operate.<br /> <br /> &lt;u&gt;Extractor Arm Switch&lt;/u&gt; – Does not permit the machine to move forward or backward unless the extractor arm is located in the center of the carriage between the indicating arrows located on the arm guard.<br /> <br /> &lt;u&gt;Powered Roller Cutout (PRC-1 or PRC-2) ''(if equipped)''&lt;/u&gt; – Disengages the powered roller function when the photo eye positioned on the edge of the BE battery compartment is disrupted by a battery, requiring additional input from the operator. Pressing the &quot;Power Roller Cutout&quot; override button (see above) on the dash will resume  powered roller operation when loading or unloading batteries from the BE carriage.<br /> <br /> &lt;u&gt;Horn ''(If equipped)''&lt;/u&gt; – Button located on the dash (see above).  Used to alert personnel before moving the BE.<br /> <br /> &lt;u&gt;Strobe Light ''(If equipped)''&lt;/u&gt; – Located on a vertical stanchion mounted to the right rear of the operator compartment. For units equipped with optional overhead guard (OHG), the beacon is located above of the operator compartment.  Beacon automatically flashes when the BE is switched on to visually notify the BE is in use.<br /> <br /> &lt;u&gt;Audible Alarm ''(if equipped)''&lt;/u&gt; – Mounted in the same location as the Strobe Light.  Automatically sounds when the BE is switched on to notify personnel that the BE is in use.<br /> <br /> &lt;u&gt;Blue Light ''(if equipped)''&lt;/u&gt; - Mounted at an elevated position on either end of the extractor which project a bright, highly concentrated blue beam pattern on the ground visually alerting personnel to the direction the extractor is moving.<br /> <br /> === &lt;big&gt;&lt;u&gt;Operation Overview&lt;/u&gt;&lt;/big&gt; ===<br /> <br /> * All operators should be familiar with the operator console of the extractor before performing any battery changes.  The controls of the console are simple and well marked.  It consists of six, manually operated, hydraulic control valves and a three position selector switch which controls the left and right vacuum cups (or optional magnets).<br /> * The operator shall make certain there are no persons or obstacles in the extractor path prior to traveling forward or reverse.<br /> * All manual valves are moved in the direction of the function travel which it controls with exception of the lift/lower valve, which is pulled toward the operator for &quot;up&quot; and pushed away for &quot;down.&quot;<br /> * In the event of any failure or malfunction, step off the dead-man switch or press the E-stop button and all functions will stop immediately, locking all hydraulics in place.<br /> * The extractor arm must be in the center of the carriage or the unit will not travel forward or reverse.<br /> * To ensure smooth operation, all valve movements should be made in a slow, deliberate motion.<br /> * Only one key should be provided to operate the extractor.<br /> * When leaving the machine, the operator shall turn off the key switch, remove the key and logout out of the IIoT (if equipped) to prevent unauthorized use<br /> * Ensure all the batteries and cables are properly stored in the battery stands prior to moving the BE.<br /> * The BE is designed to carry only one battery in each compartment on the carriage.<br /> * When loading the BE, position the batteries in the center of the compartments on the powered rollers to prevent any battery movement when transporting.<br /> * Ensure there are no projections outside of the carriage before moving the BE.<br /> <br /> === &lt;u&gt;&lt;big&gt;Operating Instructions&lt;/big&gt;&lt;/u&gt; ===<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Pre-Change Out Preparation&lt;/u&gt;&lt;/big&gt; ====<br /> 1. Position lift truck for change out in designated area.<br /> <br /> 2. Remove all battery restraints and disconnect battery cables following manufacturers guidelines.  (Be sure to position battery cables so as not to be damaged by the battery during change out.)<br /> <br /> 3. Board battery extractor and close safety gate.  (Gate must be fully closed or unit will not operate.)<br /> <br /> 4. Turn key switch to &quot;ON&quot; position. <br /> <br /> 5. Log in on the HMI display (if equipped with BE-IIoT package).<br /> <br /> 6. Depress foot pedal.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Discharged Battery Removal&lt;/u&gt;&lt;/big&gt; ====<br /> 1. Move extractor forward or reverse to position center of empty compartment with center of lift truck battery compartment. (Lead roller of extractor is equipped with a centering groove.  Users may find it beneficial to mark center of lift truck compartment to aid in alignment.)<br /> <br /> 2. Align extractor's roller compartment height with lift truck's battery compartment.<br /> <br /> 3. Rotate extractor arm into battery compartment aligned in Step 2.<br /> <br /> 4. Move extractor arm toward battery until vacuum cup/magnet contacts battery.<br /> <br /> [[File:NOTICE-warn.png|alt=NOTICE|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:NOTICE-warn.png]] '''DO NOT force cup/magnet into battery after initial contact with battery is made.'''<br /> <br /> 5. Energize vacuum/magnet by turning selector switch to proper direction, left or right.<br /> <br /> 6. Move extractor arm away from lift truck toward center of extractor roller bed, removing discharged battery.  (Battery should be pulled past first three idler rollers onto first or second powered roller.)<br /> <br /> 7. Turn off vacuum/magnet and move extractor arm away from battery 1&quot; to 2&quot;.<br /> <br /> 8. Rotate extractor arm out of battery compartment into opposite compartment (if empty) and center arm in carriage.<br /> <br /> 9. Move battery into center of compartment using powered rollers.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Charged Battery Retrieval&lt;/u&gt;&lt;/big&gt; ====<br /> 1. Locate charged battery for appropriate type of lift truck being changed.<br /> <br /> 2. Raise battery extractor roller compartment to proper level to gain access as needed to disconnect desired battery from its charger and disengage battery safety stop.<br /> <br /> [[File:WARNING-warn.png|alt=WARNING|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:WARNING-warn.png]] '''ALWAYS be sure charging has been completed and charger is not still charging battery. Dangerous sparking/arcing can occur if battery is unplugged from charger while charging.'''<br /> <br /> 3. Move extractor to appropriate rack position and align empty roller compartment with the center of the battery storage rack compartment.  ''(The battery safety stop of each compartment is the center of that compartment and should be used for alignment with the groove in the lead roller of the battery extractor compartment.'') <br /> <br /> 4. Rotate arm into empty compartment (if not already positioned there.)<br /> <br /> 5. Move extractor arm toward battery until vacuum cup/magnet contacts battery.<br /> <br /> 6. Energize vacuum cup/magnet by turning selector switch to proper direction, left or right.<br /> <br /> [[File:NOTICE-warn.png|alt=NOTICE|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:NOTICE-warn.png]] '''DO NOT force cup/magnet into battery after initial contact with battery is made.'''<br /> <br /> 7. Move extractor arm away from battery rack toward center of extractor roller bed, removing charged battery.  (Battery should be pulled past first three idler rollers onto first or second powered roller.)<br /> <br /> 8. Turn off vacuum/magnet and move extractor arm away from battery 1&quot; to 2&quot;.<br /> <br /> 9. Rotate extractor arm out of battery compartment into fully vertical position.<br /> <br /> 10. Move battery into center of compartment using powered rollers.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Discharged Battery Return&lt;/u&gt;&lt;/big&gt; ====<br /> 1. If required, adjust extractor compartment height to battery rack level with open battery compartment.  Drive extractor to align roller compartment containing discharged battery with open battery compartment.<br /> <br /> 2. Return discharged battery to battery rack using powered rollers.<br /> <br /> '''''NOTE:''''' ''In most instances, batteries can be deposited into battery racks in one motion using only powered rollers.  When this does not work, the battery may need slight assistance from extractor arm.  To do this, rotate arm into compartment such as one would if removing battery from rack.  If extractor is vacuum equipped, position top edge of cup slightly higher than edge of battery (or over lifting eye if so equipped) to prevent cup from adhering to battery - No vacuum/magnet is necessary for pushing. DO NOT activate vacuum/magnet switch.  Slowly push battery into rack until fully into compartment.''<br /> <br /> 3. Engage battery safety stop and connect battery to charger as required.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Charged Battery Installation&lt;/u&gt;&lt;/big&gt; ====<br /> 1. Lower extractor to fully lowered position.<br /> <br /> 2. Drive extractor back to lift truck and align roller compartment containing charged battery as performed in steps 1 and 2 of &quot;Discharged Battery Removal&quot;.<br /> <br /> 3. Move charged battery toward lift truck compartment by using powered rollers, verifying precise battery alignment.<br /> <br /> [[File:NOTICE-warn.png|alt=NOTICE|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:NOTICE-warn.png]] '''Many batteries are a tight fit into lift truck battery compartments. Care MUST be taken to ensure alignment is precise to avoid damage to battery, lift truck, and/or battery extractor.'''<br /> <br /> 4. Adjust extractor vertically as well as horizontally, if needed<br /> <br /> 5. Insert battery into lift truck as far as possible using only the powered rollers.<br /> <br /> 6. Rotate extractor arm into compartment and SLOWLY push battery into lift truck.  (Be sure to watch battery cables for interference.)<br /> <br /> 7. Return extractor arm to center of roller bed and lower extractor to fully lowered position.  Drive extractor out of immediate area.<br /> <br /> 8. Turn off key switch, remove key from switch, log out on the HMI display (if equipped with BE-IIoT package) and carefully exit extractor.<br /> <br /> 9. Secure newly installed battery in lift truck and reconnect battery cables.<br /> <br /> 10. Return lift truck to service<br /> {|<br /> ![[File:Caution-Warning.png|alt=CAUTION|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:Caution-Warning.png]]<br /> |'''DO NOT drive the BE into the travel path end stops. The end stops are designed to prevent the BE from accidentally traveling beyond its designated travel path. Driving the BE into the end stops will cause the BE to stop suddenly, possibly causing damage to the end stop, the BE and/or personal injury.'''<br /> |}<br /> <br /> ==== &lt;big&gt;&lt;u&gt;Optional Powered Roller Cutout Operation&lt;/u&gt;&lt;/big&gt; ====<br /> Units equipped with optional Powered Roller Cutout, the powered roller override button must be depressed in addition to actuating the hydraulic valve when a battery disrupts the photo eye(s) at the edge of the battery compartments while using the powered rollers to transfer batteries on and off of the battery extractor.<br /> <br /> ==== &lt;big&gt;&lt;u&gt;IIoT Equipped Units&lt;/u&gt;&lt;/big&gt; ====<br /> Units shipped after February, 2020 are equipped with BE-IIoT (Industrial Internet of Things) package. Operators must log in to the BE-IIoT system using the HMI (Human Machine Interface) display located on the dashboard to operate the extractor.<br /> <br /> When finished operating the extractor, the operator should log out of the BE-IIoT to prevent unauthorized access and/or operation of the extractor.<br /> <br /> == &lt;big&gt;Manual Unloading&lt;/big&gt; ==<br /> '''Lockout/tagout and de-energize all equipment prior to manually unloading any battery.'''<br /> <br /> In the event of power loss or an operational malfunction of the BE not allowing a battery to be unloaded using normal operating procedures, it is recommended a battery be removed from the BE using certified and approved vertical extraction methods and devices.<br /> {|<br /> |[[File:DANGER-warn.png|alt=DANGER|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:DANGER-warn.png]]<br /> |'''Read, understand and observe all safety warnings and procedures related to the vertical extraction device(s) being used.'''<br /> |}<br /> Should the status of the BE not allow for safe vertical extraction (due to position in the battery aisle or level of the inner carriage), only repairs required to safely maneuver the BE to a position allowing for safe vertical extraction should be made.  Once any batteries are safely unloaded, any remaining repairs can be made.<br /> {|<br /> |[[File:DANGER-warn.png|alt=DANGER|frameless|120x120px|link=https://tech.bhs1.com/index.php/File:DANGER-warn.png]]<br /> |'''Extreme care should be taken when working under or around equipment supporting elevated loads. Unexpected movement of the equipment could cause the load and/or equipment to fall. ALWAYS be sure devices of adequate size and strength are in place to prevent any personnel working under the elevated load from being crushed. Serious personal injury or death will occur.'''<br /> |}<br /> <br /> == &lt;big&gt;Spare Parts List&lt;/big&gt; ==<br /> Use only BHS approved replacement parts.<br /> <br /> Refer to the appropriate Spare Parts Kit (vacuum equipped units - Pt# BE-SPKV-TS, magnet equipped units - Pt# BE-SPKM-TS) for the list of items recommended by BHS to have on hand for BE-TS models to minimize any downtime due to minor breakdowns that may occur under normal operating conditions.<br /> <br /> BHS offers many replacement parts kits containing relevant or related parts when replacing certain individual parts or replacing any obsolete / upgraded parts.<br /> <br /> BHS also offers a supplement hose kit (Pt# 80342003) which contains an assortment of hoses allowing any hose on the extractor to be replaced immediately with a temporary hose of equal length or longer. After the extractor is back up and running, the failed hose can be taken to have an exact replacement made. Once the new hose is made and installed, the temporary hose can be returned to the kit for future use.<br /> <br /> Go to [[www.bhs1.com]] and click &quot;Parts&quot; for all the latest parts kits and corresponding installation instructions (if applicable).<br /> <br /> BHS recommends that a full maintenance inspection report similar to the one provided be done at least once a month.<br /> <br /> Any parts found to be excessively worn or damaged should promptly be replaced unless said parts pose a safety risk to the operator and/or extractor, in which case the unit should be removed from service until the problem(s) are remedied (See<br /> <br /> Operator's Daily Checklist.)<br /> <br /> ''Note: Spare parts kits contain parts for the most current machine design/configuration. Due to continuous design and manufacturing updates and improvements, not all the parts in the spare parts kits may be compatible with older units. Consult factory when ordering spare or replacement parts for existing units in the field to ensure part compatibility.''<br /> <br /> = &lt;big&gt;Parts Sections&lt;/big&gt; =<br /> <br /> == &lt;big&gt;Chassis&lt;/big&gt; ==<br /> <br /> === &lt;big&gt;&lt;u&gt;Equalization Components&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Equalization Components.png|alt=BE-TS Chassis Equalization|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PT0222-1<br /> |LINK-CONNECTING-#60<br /> |<br /> |<br /> |8<br /> |-<br /> |2<br /> |HW0017<br /> |NUT-HEX-3/4-10<br /> |<br /> |<br /> |8<br /> |-<br /> |3<br /> |HW0115<br /> |WASHER-LOCK-3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |43097001<br /> |STUD-ANCHOR-5&quot;<br /> |<br /> |''Upper''<br /> |4<br /> |-<br /> |5<br /> |HW0020<br /> |NUT-JAM-3/4-10<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43097002<br /> |STUD-ANCHOR-2&quot;<br /> |<br /> |''Lower''<br /> |4<br /> |-<br /> |7<br /> |00158001-14<br /> |CHAIN-ROLLER-#60<br /> |<br /> |<br /> |4<br /> |}<br /> [[File:BE-TS Equalization Components - 1.0.2.png|alt=BE-TS Chassis Equalization 2|frameless|575x575px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PT0416<br /> |COLLAR-SHAFT-1 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |2<br /> |43097006<br /> |KEY-3/8&quot; X 2 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |PT0224<br /> |SPROCKET-60B12 X 1 1/2&quot;<br /> |<br /> |''Keyed in line''<br /> |8<br /> |-<br /> |4<br /> |PT0405<br /> |FLANGE BEARING-2 BOLT-1 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1 1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |6<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> | rowspan=&quot;4&quot; |7<br /> |43127001<br /> |SHAFT-EQUALIZATION-81.75&quot;<br /> |<br /> |''BE-24-2-TS''<br /> |2<br /> |-<br /> |43327001<br /> |SHAFT-EQUALIZATION-105.75&quot;<br /> |<br /> |''BE-36-2-TS''<br /> |2<br /> |-<br /> |44327001<br /> |SHAFT-EQUALIZATION-117.75&quot;<br /> |<br /> |''BE-42-2-TS''<br /> |2<br /> |-<br /> |44527001<br /> |SHAFT-EQUALIZATION-75.75&quot;<br /> |<br /> |''BE-42-1-TS''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |8<br /> |PT0503<br /> |BEARING-FLANGED LOAD-2 1/4&quot;<br /> |<br /> |''Used after December 2003''<br /> |8<br /> |-<br /> |43026001<br /> |BEARING-FLANGED LOAD-2 1/4&quot; ''(MACHINED)''<br /> |<br /> |''Used prior to December 2003''<br /> |8<br /> |-<br /> |9<br /> |HW0025<br /> |NUT-JAM-7/8-14<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0117<br /> |WASHER-LOCK-7/8&quot; ''(NOT SHOWN)''<br /> |<br /> |''Used prior to August 2002''<br /> |8<br /> |}<br /> <br /> === &lt;u&gt;'''&lt;big&gt;Bridge &amp; Cross Bar&lt;/big&gt;'''&lt;/u&gt; ===<br /> [[File:BE-TS Bridge and Cross Bar.png|alt=BE-TS Bridge and Cross Bar|frameless|524x524px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1 1/4&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |2<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |20<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |20<br /> |-<br /> |4<br /> |HW0515<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |''Fully Threaded''<br /> |8<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> === &lt;u&gt;'''&lt;big&gt;Lift Cylinder Connections&lt;/big&gt;'''&lt;/u&gt; ===<br /> [[File:BE-TS Lift Cylinder Connections.png|alt=BE-TS Lift Cylinder Connections|frameless|589x589px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |00158001-13<br /> |CHAIN-ROLLER-#80<br /> |<br /> |<br /> |4<br /> |-<br /> |2<br /> |HW0014<br /> |NUT-HEX-1-8<br /> |<br /> |<br /> |8<br /> |-<br /> |3<br /> |43897002<br /> |STUD-LIFT-INNER FRAME<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |PT0204<br /> |LINK-CONNECTING-#80<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |43897001<br /> |STUD-LIFT-OUTER FRAME<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43815018<br /> |BRACKET-CYLINDER SUPPORT<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |SS0761<br /> |U-BOLT-CYLINDER MOUNTING<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |12<br /> |-<br /> |9<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |10<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |8<br /> |-<br /> | rowspan=&quot;2&quot; |11<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |<br /> |''Idler caster end of unit'' <br /> |2<br /> |-<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |''Drive wheel end of unit'' <br /> |2<br /> |-<br /> |12<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |14<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |43822002<br /> |CLEVIS ASSEMBLY<br /> |<br /> |''Sold as assembly only''<br /> |4<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Guidance Arm&lt;/big&gt;&lt;/u&gt;''' ===<br /> [[File:BE-TS Guidance Arm.png|alt=BE-TS Guidance Arm|frameless|562x562px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> ! colspan=&quot;2&quot; |NO. REQ<br /> |-<br /> |1<br /> |43015011<br /> |GUIDE ARM WELDMENT, 2 ROLLER<br /> |<br /> |<br /> |2<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |2<br /> |43017025<br /> |SPACER-GUIDE ARM<br /> |<br /> |''† 1/2&quot; thick''<br /> |4<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |3<br /> |41215204<br /> |GUIDE ARM WELDMENT, 4 ROLLER<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |2<br /> |-<br /> |4<br /> |41217274<br /> |SPACER-GUIDE ARM<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |4<br /> |-<br /> |5<br /> |43012007<br /> |CAM ROLLER-1 3/4&quot;<br /> |<br /> |<br /> |4<br /> |8<br /> |-<br /> |6<br /> |HW0115<br /> |WASHER-LOCK-3/4&quot;<br /> |<br /> |<br /> |4<br /> |8<br /> |-<br /> |7<br /> |HW0011<br /> |NUT-HEX-3/4-16<br /> |<br /> |<br /> |4<br /> |8<br /> |-<br /> |8<br /> |HW0509<br /> |BOLT-HHCS-1/2-13 X 4-1/2&quot;<br /> |<br /> |<br /> |4<br /> |6<br /> |-<br /> |9<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |6<br /> |-<br /> |10<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |4<br /> |6<br /> |-<br /> |11<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |4<br /> |6<br /> |-<br /> |12<br /> |41215234<br /> |GUIDE ARM WELDMENT (POLY)<br /> |<br /> |<br /> |2<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |13<br /> |41217317<br /> |POLY SLIDE MOUNTING BLOCK<br /> |<br /> |<br /> |4<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |14<br /> |41217318<br /> |POLY SLIDE<br /> |<br /> |<br /> |4<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |15<br /> |HW0501<br /> |BOLT-HHCS-1/2-13 X 1&quot;<br /> |<br /> |<br /> |12<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |16<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |12<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |17<br /> |91253A546<br /> |BOLT FHSCS-1/4-20 X 1-1/2&quot;<br /> |<br /> |<br /> |8<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |18<br /> |HW0003<br /> |NUT-NILN-1/4-20<br /> |<br /> |<br /> |8<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> ! colspan=&quot;7&quot; |NOTES<br /> |-<br /> | colspan=&quot;7&quot; |''† Older units equipped with (1) 1&quot; thick spacer per guide arm bracket.'' <br /> |-<br /> | colspan=&quot;7&quot; |''†† Multiple styles of guide arms have been utilized on extractors. Refer to the parts diagrams for correct replacement parts.'' <br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Roller Bed Componenets&lt;/big&gt;&lt;/u&gt;''' ===<br /> ==== '''&lt;big&gt;''Idler Rollers''&lt;/big&gt;''' ====<br /> [[File:BE-TS Idler Rollers.png|alt=BE-TS Idler Rollers|frameless|746x746px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;3&quot; |1<br /> |43182001<br /> |LEAD ROLLER ASSEMBLY-24&quot;<br /> |<br /> |''With alignment groove''<br /> |4<br /> |-<br /> |43382001<br /> |LEAD ROLLER ASSEMBLY-36&quot;<br /> |<br /> |''With alignment groove''<br /> |4<br /> |-<br /> |43482001<br /> |LEAD ROLLER ASSEMBLY-42&quot;<br /> |<br /> |''With alignment groove''<br /> |4<br /> |-<br /> | rowspan=&quot;3&quot; |2<br /> |43182002<br /> |IDLER ROLLER ASSEMBLY-24&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |43382002<br /> |IDLER ROLLER ASSEMBLY-36&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |43482002<br /> |IDLER ROLLER ASSEMBLY-42&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> | rowspan=&quot;3&quot; |3<br /> |43187002<br /> |SHAFT-HEX-.75&quot; X 25.75&quot;<br /> |<br /> |''24&quot; compartments''<br /> |8<br /> |-<br /> |43387002<br /> |SHAFT-HEX-.75&quot; X 37.75&quot;<br /> |<br /> |''36&quot; compartments''<br /> |8<br /> |-<br /> |43487002<br /> |SHAFT-HEX-.75&quot; X 43.75&quot;<br /> |<br /> |''42&quot; compartments''<br /> |8<br /> |-<br /> | rowspan=&quot;3&quot; |4<br /> |43187003<br /> |SHAFT-HEX-.75&quot; X 27.5&quot;<br /> |<br /> |''24&quot; compartments''<br /> |4<br /> |-<br /> |43387003<br /> |SHAFT-HEX-.75&quot; X 39.5&quot;<br /> |<br /> |''36&quot; compartments''<br /> |4<br /> |-<br /> |43487003<br /> |SHAFT-HEX-.75&quot; X 45.5&quot;<br /> |<br /> |''42&quot; compartments''<br /> |4<br /> |-<br /> |5<br /> |HW1058<br /> |PIN-HITCH<br /> |<br /> |<br /> |24<br /> |}<br /> '''&lt;big&gt;''Powered Rollers''&lt;/big&gt;'''<br /> <br /> [[File:BE-TS Powered Rollers.png|alt=BE-TS Powered Rollers|frameless|546x546px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;3&quot; |1<br /> |43182003<br /> |POWERED ROLLER-24&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |43382003<br /> |POWERED ROLLER-36&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |43485003<br /> |POWERED ROLLER-42&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |2<br /> |43087001<br /> |JOURNAL-POWERED ROLLER<br /> |<br /> |<br /> |10<br /> |-<br /> |3<br /> |PT0404<br /> |FLANGE BEARING-3-BOLT-1&quot;<br /> |<br /> |<br /> |20<br /> |-<br /> |4<br /> |HW0321<br /> |BOLT-HHCS-5/16-18 X 1 1/4&quot;<br /> |<br /> |<br /> |60<br /> |-<br /> |5<br /> |HW0105<br /> |WASHER-LOCK-5/16&quot;<br /> |<br /> |<br /> |60<br /> |-<br /> |6<br /> |HW0004<br /> |NUT-HEX-5/16-18<br /> |<br /> |<br /> |60<br /> |-<br /> |7<br /> |PT0033<br /> |SPROCKET-35B18 X 1&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |8<br /> |00197028<br /> |KEY-1/4&quot; X 1 1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |00158001-16<br /> |CHAIN-ROLLER-#35<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |PT0031<br /> |LINK-CONNECTING-#35<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |PT0418<br /> |COLLAR-SHAFT-1&quot;<br /> |<br /> |<br /> |10<br /> |}<br /> [[File:BE-TS Powered Rollers Detail A.png|alt=BE-TS Powered Rollers Detail A|frameless|542x542px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0120<br /> |MOTOR-HYDRAULIC-160CC<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW1071<br /> |KEY-WOODRUFF-#808 STD<br /> |<br /> |''Supplied with Item 1''<br /> |A/R<br /> |-<br /> |3<br /> |H1544<br /> |ADAPTER-#6 JICM X #10 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |18<br /> |-<br /> |5<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |18<br /> |-<br /> |6<br /> |43017004<br /> |PLATE-MOTOR MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |PT0302-1<br /> |COUPLING BODY-#40 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |PT0301<br /> |CHAIN-COUPLING-#40<br /> |<br /> |''Includes connecting pin''<br /> |2<br /> |-<br /> |9<br /> |00197026<br /> |KEY-1/4&quot; X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43097003<br /> |KEY-1/4&quot; X 5/8&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Hose Carrier&lt;/big&gt;&lt;/u&gt;''' ===<br /> [[File:BE-TS Hose Carrier.png|alt=BE-TS Hose Carrier|frameless|550x550px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PT0629<br /> |CARRIER TRACK<br /> |<br /> |''81 links required''<br /> |10'<br /> |-<br /> |2<br /> |PT0631<br /> |BRACKET-UPPER MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0212<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0032<br /> |NUT-NILN-#10-24<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |PT0630<br /> |BRACKET-LOWER MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |7<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |43817056-2<br /> |BRACKET-CARRIER TRACK MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |HW0401<br /> |BOLT-HHCS-3/8-16 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |14<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |43817057<br /> |PLATE-CARRIER TRACK SUPPORT<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === &lt;big&gt;'''&lt;u&gt;Cable Retractor&lt;/u&gt;'''&lt;/big&gt; ===<br /> [[File:BE-TS Cable Retractor.png|alt=BE-TS Cable Retractor|frameless|585x585px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |CCR-12HD<br /> |TAKE UP REEL-CARRIER TRACK<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Operator Gate&lt;/big&gt;&lt;/u&gt;''' ===<br /> [[File:BE-TS Discontinued Drop Bar Operator Gate.png|alt=BE-TS Discontinued Drop Bar Operator Gate|frameless|568x568px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43015004<br /> |GATE-OPERATOR<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0407<br /> |BOLT-HHCS-3/8-16 X 2 3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |<br /> |<br /> |1<br /> |}<br /> [[File:BE-TS Operator Gate Continued.png|alt=BE-TS Operator Gate Continued|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43017064-2<br /> |LATCH-SWING GATE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0418<br /> |BOLT-HHCS-3/8-16 X 2 1/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0031<br /> |NUT-LOCK-3/8-16<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |N/A<br /> |HINGE-SPRING<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |5<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |HW1037<br /> |STOP-GATE<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0003<br /> |NUT-NILN-1/4-20<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |N/A<br /> |TORSION SPRING<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |11<br /> |HW0816<br /> |SCREW-HHCS-SELF DRILLING-#10 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |43806001<br /> |ANTI-FATIGUE MAT<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |43017058-2<br /> |THRESHOLD<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |HW0107<br /> |WASHER-LOCK3/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |HW9002<br /> |GAS SPRING<br /> |80292015<br /> |<br /> |1<br /> |-<br /> |19<br /> |43017086-2<br /> |BRACKET-MOUNTING-SPRING<br /> |80292015<br /> |<br /> |2<br /> |-<br /> |20<br /> |HW0815<br /> |SCREW-SELF DRILLING-#12-24 X 1&quot; T-4<br /> |80292015<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Part Discontinued. Spring Hinge and Torsion Spring must be replaced with Gas Spring Kit.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Guarding&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Outer Carriage Guards&lt;/big&gt;''''' ====<br /> <br /> ===== '''''1-Piece Outside Frame Guarding''''' =====<br /> [[File:BE-TS Outside Frame Guard 1-Piece.png|alt=BE-TS Outside Frame Guard 1-Piece|frameless|550x550px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817038<br /> |GUARD-FAR END-TOP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817037<br /> |GUARD-FAR END-MIDDLE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43817035<br /> |GUARD-FAR END-BOTTOM<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |33<br /> |}<br /> <br /> ===== '''''Split Outside Frame Guarding''''' =====<br /> [[File:BE-TS Outside Split Frame Guard.png|alt=BE-TS Outside Split Frame Guard|frameless|562x562px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817103<br /> |GUARD-FAR END-TOP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817102<br /> |GUARD-FAR END-MIDDLE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43817101<br /> |GUARD-FAR END-BOTTOM<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |37<br /> |}<br /> <br /> ==== '''&lt;big&gt;''Inner Carriage Guards''&lt;/big&gt;''' ====<br /> <br /> ===== '''''Inner Carriage Guards (Rotary Actuator)''''' =====<br /> [[File:BE-TS Inner Carriage Guard Rotary.png|alt=BE-TS Inner Carriage Guard (Rotary Actuator Units)|frameless|554x554px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817041-2<br /> |GUARD-FRONT-OPERATOR CONSOLE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817042-2<br /> |GUARD-INNER-FRAME<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |43014006-2<br /> |GUARD-LINEAR DRIVE SCREW<br /> |<br /> |<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |4<br /> |43017010-2<br /> |GUARD-SIDE-ARM CARRIER SHAFT<br /> |<br /> |<br /> |2<br /> |-<br /> |44517002-2<br /> |GUARD-SIDE-ARM CARRIER SHAFT<br /> |<br /> |''† Single compartment units only''<br /> |1<br /> |-<br /> |5<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |34<br /> |-<br /> |6<br /> |43017009-2<br /> |BRACKET-SCREW GUARD MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Single Compartment Guard replaces standard, Far Side Arm Carrier Shaft Guard.'' <br /> |}<br /> '''''Inner Carriage Guards (Helical Actuator)'''''<br /> <br /> [[File:BE-TS Inner Carriage Guard Helical Actuator.png|alt=BE-TS Inner Carriage Guard (Helical Actuator Units)|frameless|547x547px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817041-2<br /> |GUARD-FRONT-OPERATOR CONSOLE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817042-2<br /> |GUARD-INNER-FRAME<br /> |<br /> |<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |3<br /> |43017081-2<br /> |GUARD-SIDE-ARM CARRIER SHAFT<br /> |<br /> |<br /> |2<br /> |-<br /> |44517003-2<br /> |GUARD-SIDE-ARM CARRIER SHAFT<br /> |<br /> |''† Single compartment units only''<br /> |1<br /> |-<br /> |4<br /> |43017080-2<br /> |BRACKET-SIDE GUARD MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |43017082-3<br /> |MOUNT-CHAIN GUARD-LEAD SCREW<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43017082-4<br /> |MOUNT-CHAIN GUARD-LEAD SCREW<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |43017083-2<br /> |GUARD-CHAIN-LEAD SCREW<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0347<br /> |BOLT-BHSCS-1/4-20 X 3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |28<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Single Compartment Guard replaces standard, Far Side Arm Carrier Shaft Guard.'' <br /> |}<br /> <br /> ==== '''&lt;big&gt;''Dash &amp; Platform Guards''&lt;/big&gt;''' ====<br /> [[File:BE-TS Dash &amp; Platform Guards.png|alt=BE-TS Dash &amp; Platform Guards|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41614004-2<br /> |DASHBOARD-OPERATOR CONSOLE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43817040<br /> |KICK PLATE-OPERATOR CONSOLE<br /> |<br /> |''41.5&quot; high''<br /> |1<br /> |-<br /> |3<br /> |43817086-2<br /> |DASHBOARD-OPERATOR CONSOLE<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43817088<br /> |KICK PLATE-OPERATOR CONSOLE<br /> |<br /> |''33.5&quot;'' ''high''<br /> |1<br /> |-<br /> |5<br /> |43817110-2<br /> |FRAME-DASHBOARD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |A/R<br /> |PLATE-DASHBOARD<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |7<br /> |HW0060<br /> |NUT-CLIP-#10-24<br /> |<br /> |<br /> |12<br /> |-<br /> |8<br /> |SS0114<br /> |BHSCS-#10-24 X 1/2&quot;-SST<br /> |<br /> |<br /> |12<br /> |-<br /> |9<br /> |PL0602<br /> |VINYL EDGING<br /> |<br /> |''At Foot Switch (Not shown)'' <br /> |1'<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Consult factory''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Lift Cylinder Guards&lt;/big&gt;''''' ====<br /> [[File:BE-TS Lift Cylinder Guards.png|alt=BE-TS Lift Cylinder Guards|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;2&quot; |1<br /> |43815016<br /> |GUARD-CLEVIS<br /> |<br /> |Operator right / Far left<br /> |2<br /> |-<br /> |43815017<br /> |GUARD-CLEVIS<br /> |<br /> |Operator left / Far right<br /> |2<br /> |-<br /> |2<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Labels &amp; Placards&lt;/big&gt;&lt;/u&gt;''' ===<br /> [[File:BE-TS Labels &amp; Placards Chassis.png|alt=BE-TS Labels &amp; Placards Chassis|frameless|546x546px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |00196616<br /> |LABEL-&quot;NO RIDERS ALLOWED&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |00196210<br /> |LABEL-WARNING-&quot;OPERATION BY AUTHORIZED PERSONNEL ONLY&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43696001<br /> |PLACARD-OFF / ON<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43096018<br /> |PLACARD-RACK LEVEL ASSIST<br /> |<br /> |''† If equipped''<br /> |1<br /> |-<br /> |5<br /> |43096015<br /> |PLACARD-PLATFORM RAISE / LOWER<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43096010<br /> |PLACARD-HORN<br /> |<br /> |''† If equipped''<br /> |1<br /> |-<br /> |7<br /> |43096016<br /> |PLACARD-DRIVE / ARM ROTATION<br /> |<br /> |<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |8<br /> |43096012<br /> |PLACARD-VACUUM OFF / ON<br /> |<br /> |''Vacuum units only''<br /> |1<br /> |-<br /> |43096011<br /> |PLACARD-MAGNET OFF / ON<br /> |<br /> |''Magnet units only (Not shown)''<br /> |1<br /> |-<br /> |9<br /> |43096017<br /> |PLACARD-POWERED ROLLER CUTOUT OVERRIDE<br /> |<br /> |''† If equipped''<br /> |1<br /> |-<br /> |10<br /> |43096013<br /> |PLACARD-POWERED ROLLERS / ARM TRAVERSE<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |00196633<br /> |LABEL-NOTICE-&quot;IN LINE VACUUM FILTER...&quot;<br /> |<br /> |''(1) per side (Vacuum units only)''<br /> |2<br /> |-<br /> |12<br /> |SM-1197<br /> |LABEL-ARM POSITION ARROW<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |00196609<br /> |LABEL-NOTICE-&quot;ARM MUST BE POSITIONED BETWEEN ARROWS...&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |00196602<br /> |LABEL-NOTICE-&quot;LUBRICATION POINTS ON UNDERSIDE&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |00196218<br /> |LABEL-WARNING-&quot;ELECTRICAL VOLTAGE HAZARD&quot;<br /> |<br /> |''Magnet units only''<br /> |1<br /> |-<br /> |16<br /> |00196238<br /> |LABEL-WARNING-&quot;STRONG MAGNETIC<br /> <br /> FIELD/DO NOT USE WITH PACEMAKER&quot;<br /> |<br /> |''†† Magnet units only''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Rack Level Assist (LAI), Horn and Powered Roller Cutout (PRC) are optional features. Not all units are equipped with these options.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Pacemaker Warning Label takes the place of the discontinued, Triangular Magnetic Field Label.''<br /> |}<br /> [[File:BE-TS Labels &amp; Placards Frame.png|alt=BE-TS Labels &amp; Placards Frame|frameless|549x549px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |00196004<br /> |LABEL-CAUTION-&quot;WATCH FOR BATTERY AND CHARGER CABLES IN TRAVEL PATH&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |00196216<br /> |LABEL-WARNING-&quot;CHAIN ENTANGLEMENT<br /> <br /> HAZARD&quot;<br /> |<br /> |''(1) per Clevis Guard'' <br /> |4<br /> |-<br /> |3<br /> |00196622<br /> |LABEL-LIFT POINT<br /> |<br /> |''(2) each end''<br /> |4<br /> |-<br /> |4<br /> |00196700<br /> |DECAL-BHS-24&quot; X 7.875&quot;<br /> |<br /> |''Far end (Not shown)''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |5<br /> |00196630<br /> |LABEL-NOTICE-HYD. OIL SPEC. (AW 68)<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |00196645<br /> |LABEL-NOTICE-HYD. OIL SPEC. (AW 32)<br /> |<br /> |''† See notes'' <br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |† Most units shipped prior to December 2014 require AW 68 Hydraulic Oil. Some units shipped prior to December 2014 shipped with AW 32 for low temperature applications.<br /> |}<br /> <br /> == &lt;big&gt;Extractor Arm&lt;/big&gt; ==<br /> {| class=&quot;wikitable&quot;<br /> !SYMBOL<br /> !DESCRIPTION / NOTICE<br /> !ACTUATOR DIAGRAM<br /> |-<br /> |[[File:IOP-400 BE-SL&amp;DS (10-23) Rotary Actuator Symbol.png|alt=Rotary Actuator Symbol|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Rotary_Actuator_Symbol.png]]<br /> |<br /> ==='''&lt;u&gt;&lt;big&gt;Rotary Actuator Symbol&lt;/big&gt;&lt;/u&gt;'''===<br /> Battery Extractors shipped prior to May 2020 are equipped with Rotary Actuator Extractor Arms. Parts Diagrams Specific to the Rotary Actuator design are indicated with the Rotary Actuator symbol.<br /> |[[File:IOP-400 BE-SL&amp;DS (10-23) Rotary Actuator Extractor Arm.png|alt=BE-TS Rotary Actuator|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Rotary_Actuator_Extractor_Arm.png]]<br /> |-<br /> |[[File:IOP-400 BE-SL&amp;DS (10-23) Helical Actuator Symbol.png|alt=Helical Actuator Symbol|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Helical_Actuator_Symbol.png]]<br /> |<br /> ===&lt;big&gt;'''&lt;u&gt;Helical Actuator Symbol&lt;/u&gt;'''&lt;/big&gt;===<br /> Battery Extractors shipped from May 2020 to Present are equipped with Helical Actuator Extractor Arms. Parts Diagrams Specific to the Rotary Actuator design are indicated with the Helical Actuator Symbol.<br /> |[[File:IOP-400 BE-SL&amp;DS (10-23) Helical Actuator Extractor Arm.png|alt=BE-TS Helical Actuator|frameless|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Helical_Actuator_Extractor_Arm.png]]<br /> |}<br /> ===&lt;big&gt;&lt;u&gt;Vacuum Components &amp; Swing Arms&lt;/u&gt;&lt;/big&gt;===<br /> ====''&lt;big&gt;Vacuum Arms (Rotary Actuator)&lt;/big&gt;''====<br /> [[File:BE-TS Vacuum Arms (Rotary Actuator).png|alt=BE-TS Vacuum Arms (Rotary Actuator)|frameless|619x619px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;2&quot; |1<br /> |N/A<br /> |ARM-PUSH/PULL-30&quot;<br /> |<br /> |''&lt;sup&gt;†&lt;/sup&gt; Discontinued''<br /> |1<br /> |-<br /> |N/A<br /> |ARM-PUSH/PULL-36&quot;<br /> |<br /> |''&lt;sup&gt;†&lt;/sup&gt; Discontinued''<br /> |1<br /> |-<br /> |2<br /> |HW0509<br /> |BOLT-HHCS-1/2-13 X 4 1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |P0505<br /> |BUSHING-RED-#6 NPT X #4 FNPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |P0402<br /> |HOSE BARB-1/4 X #4 MNPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0428<br /> |STUD-VACUUM-3/8-16 X 5&quot;<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |9<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |HW-KIT-2<br /> |<br /> |40<br /> |-<br /> |10<br /> |HW1001<br /> |SPRING-3/8&quot;<br /> |HW-KIT-2<br /> |<br /> |24<br /> |-<br /> |11<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |12<br /> |HW0424<br /> |NUT-JAM-3/8-16<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |REF<br /> |43052006<br /> |ADJUSTABLE PUSH/PULL ARM<br /> |<br /> |''Includes Items 13 through 17''<br /> |1<br /> |-<br /> |13<br /> |43057034<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |43055008<br /> |VACUUM CUP MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''&lt;sup&gt;†&lt;/sup&gt; One-piece Arms no longer available. Must replace with Adjustable Arm.''<br /> |}<br /> <br /> ====&lt;big&gt;''Vacuum Cups''&lt;/big&gt;====<br /> [[File:BE-TS Vacuum Cups.png|alt=Vacuum Cups|frameless|563x563px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;4&quot; |A/R<br /> |00162004<br /> |VACUUM CUP-10&quot; 3-PC (STANDARD)<br /> |<br /> |''&lt;sup&gt;†&lt;/sup&gt; Includes Items 1 through 4''<br /> | rowspan=&quot;4&quot; |A/R<br /> |-<br /> |00162003<br /> |VACUUM CUP-12&quot; 3-PC (STANDARD)<br /> |<br /> |''&lt;sup&gt;†&lt;/sup&gt; Includes Items 4 through 7''<br /> |-<br /> |00162007<br /> |VACUUM CUP-10&quot; 3-PC, REINFORCED<br /> |<br /> |''Includes Items 1,3,4 &amp; 8''<br /> |-<br /> |00162005<br /> |VACUUM CUP-12&quot; 3-PC, REINFORCED<br /> |<br /> |''Includes Items 4,5,7 &amp; 9''<br /> |-<br /> |1<br /> |00164006<br /> |CASTING-10&quot; VACUUM CUP<br /> |<br /> | rowspan=&quot;3&quot; |''10&quot; cup only''<br /> |1<br /> |-<br /> |2<br /> |00164004<br /> |SEAL-RUBBER-10&quot;<br /> |<br /> |1<br /> |-<br /> |3<br /> |00165002<br /> |PLATE-FRONT-10&quot;<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0311<br /> |BOLT-FHSCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |00166001<br /> |CASTING-12&quot; VACUUM CUP<br /> |<br /> | rowspan=&quot;3&quot; |''12&quot; cup only''<br /> |1<br /> |-<br /> |6<br /> |00164001<br /> |SEAL-RUBBER-12&quot;<br /> |<br /> |1<br /> |-<br /> |7<br /> |00165001<br /> |PLATE-FRONT-12&quot;<br /> |<br /> |1<br /> |-<br /> |8<br /> |00164007<br /> |SEAL-RUBBER-10&quot;-REINFORCED<br /> |<br /> |<br /> |A/R<br /> |-<br /> |9<br /> |00167003<br /> |SEAL-RUBBER-12&quot;-REINFORCED<br /> |<br /> |<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''&lt;sup&gt;†&lt;/sup&gt; 10&quot; and 12&quot; 1-Piece Cups no longer available. Must replace with 3-Piece Cup. Verify required cup size prior to ordering.''<br /> |}<br /> <br /> ====&lt;big&gt;''Swing Arms (Rotary Actuator)''&lt;/big&gt;====<br /> [[File:BE-TS Swing Arms (Rotary Actuator).png|alt=BE-TS Swing Arms (Rotary Actuator)|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> |ITEM<br /> |BHS PART NUMBER<br /> |DESCRIPTION<br /> |REF. KIT NO.<br /> |NOTES<br /> |NO. REQ<br /> |-<br /> | rowspan=&quot;3&quot; |1<br /> |45055001<br /> |TIE PLATE-SWING ARM<br /> |<br /> |BE-24-2-TS<br /> |1<br /> |-<br /> |45255001<br /> |TIE PLATE-SWING ARM<br /> |<br /> |BE-36-2-TS (NOT SHOWN)<br /> |1<br /> |-<br /> |45355001<br /> |TIE PLATE-SWING ARM<br /> |<br /> |BE-42-2-TS (NOT SHOWN)<br /> |1<br /> |-<br /> |2<br /> |43055004<br /> |SWING ARM-RHS<br /> |†<br /> |NOT SOLD INDIVIDUALLY<br /> |1<br /> |-<br /> |3<br /> |43055002<br /> |SWING ARM-LHS<br /> |†<br /> |NOT SOLD INDIVIDUALLY<br /> |1<br /> |-<br /> |4<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0113<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0010<br /> |NUT-JAM-5/8-11<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |PT0413<br /> |COLLAR-SHAFT-3&quot;<br /> |80252001<br /> |<br /> |2<br /> |-<br /> |8<br /> |43027001<br /> |SHAFT-ROTARY ACTUATOR<br /> |80252001<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW1013<br /> |KEY-3/8&quot; X 12&quot;<br /> |80252001<br /> |<br /> |1<br /> |-<br /> |10<br /> |PT0419<br /> |BEARING-SAE 841-2&quot; I.D., 3&quot; OD, 1/8&quot; THICK<br /> |80252001<br /> |<br /> |3<br /> |-<br /> |11<br /> |43052005<br /> |CAP-BEARING<br /> |<br /> |INCLUDES BEARING<br /> |2<br /> |-<br /> |12<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |13<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |14<br /> |43057014<br /> |STANDOFF-WIRE<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |HW0312<br /> |SCREW-SHSS-1/4-20 X 1&quot;-CUP POINT<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |43057003<br /> |CUSHION-SWING ARM<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |43055001<br /> |STOP-SWING ARM<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |20<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |21<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |H1565<br /> |ADAPTER-45 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |23<br /> |H1600<br /> |ADAPTER-90 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |&lt;sup&gt;†&lt;/sup&gt; ''Included in multiple kits.''<br /> |-<br /> | colspan=&quot;6&quot; |See ''Single Compartment Swing Arm Stop for the the Single Compartment Swing Arm Stop.''<br /> |}<br /> <br /> === '''''Vacuum Swing Arm Stop (Rotary Actuator)''''' ===<br /> [[File:BE-TS Single Compartment Swing Arms (Rotary Actuator).png|alt=BE-TS Single Compartment Swing Arms (Rotary Actuator)|frameless|575x575px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |44555001<br /> |STOP-SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43057003<br /> |CUSHION-SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43057008<br /> |SPACER-SWING ARM STOP<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |}<br /> ====''&lt;big&gt;Vacuum Pump (Rotary Actuator)&lt;/big&gt;''====<br /> [[File:BE-TS Vacuum Pumps (Rotary Actuator).png|alt=BE-TS Vacuum Pumps (Rotary Actuator)|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |P0005<br /> |PUMP-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |P0208<br /> |FILTER-HI FLOW<br /> |<br /> |<br /> |3<br /> |-<br /> |3<br /> |P0503<br /> |NIPPLE-#4 NPT-BRASS<br /> |<br /> |<br /> |3<br /> |-<br /> |4<br /> |P0502<br /> |TEE-#4 FNPT-BRASS<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |P0506<br /> |ELBOW-STR-90 DEG-#4 NPT-BRASS<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |P0402<br /> |HOSE BARB-1/4 X #4 NPTM-BRASS<br /> |<br /> |<br /> |6<br /> |-<br /> |7<br /> |P0207<br /> |VALVE-VACUUM RELEASE<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |P0302<br /> |HOSE-VACUUM-1/4&quot; I.D.<br /> |<br /> |''Two 6&quot; pieces''<br /> |1'<br /> |-<br /> |9<br /> |P0302<br /> |HOSE-VACUUM-1/4&quot; I.D.<br /> |<br /> |''Short Arm side''<br /> |1'<br /> |-<br /> |10<br /> |P0302<br /> |HOSE-VACUUM-1/4&quot; I.D.<br /> |<br /> |''Long Arm side''<br /> |2'<br /> |-<br /> |11<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |HW0212<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |E0624<br /> |CONNECTOR-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |15a<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |''Not shown''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |16<br /> |E0501<br /> |CORD-14-4 SW/SOW<br /> |<br /> |''Withtout Ground Connection in Arm''<br /> | rowspan=&quot;2&quot; |15'<br /> |-<br /> |E0514<br /> |CORD-16-5 SW/SOW<br /> |<br /> |<br /> |-<br /> |17<br /> |43057014<br /> |STANDOFF-CABLE<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |HW0206<br /> |SCREW-RHMS-#10-32 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |19<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |20<br /> |43057021<br /> |PLATE-STIFFENER<br /> |†<br /> |<br /> |2<br /> |-<br /> |21<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |†<br /> |<br /> |12<br /> |-<br /> |22<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |†<br /> |<br /> |12<br /> |-<br /> |23<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |†<br /> |<br /> |12<br /> |-<br /> |24<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |†<br /> |''Not shown''<br /> |24<br /> |-<br /> |25<br /> |P0111<br /> |FILTER-VACUUM-INLINE<br /> |<br /> |''Not shown''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |&lt;sup&gt;†&lt;/sup&gt; ''Included in multiple kits.''<br /> |}<br /> ===&lt;u&gt;&lt;big&gt;Rotary Actuator&lt;/big&gt;&lt;/u&gt;===<br /> [[File:BE-TS Rotary Actuator.png|alt=BE-TS Rotary Actuator|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43046001<br /> |ROTARY ACTUATOR<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |80000002<br /> |ROTARY ACTUATOR BASE ASSEMBLY<br /> |<br /> |''Without Actuator''<br /> |1<br /> |-<br /> |2A<br /> |N/A<br /> |VERTICAL CARRIER PLATE-OUTER<br /> |<br /> |''Included with 80000002''<br /> |2<br /> |-<br /> |2B<br /> |N/A<br /> |VERTICAL CARRIER PLATE-INNER<br /> |<br /> |''Included with 80000002''<br /> |1<br /> |-<br /> |2C<br /> |N/A<br /> |CARRIER BASE PLATE<br /> |<br /> |''Included with 80000002''<br /> |1<br /> |-<br /> |3<br /> |HW1070<br /> |PIN-PULL DOWEL-5/8&quot; X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0508<br /> |BOLT-SHCS-1/2-13 X 3/4&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW1045<br /> |PIN-PULL DOWEL-3/8&quot; X 1 1/2&quot;<br /> |<br /> |''Included with 80000002''<br /> |6<br /> |-<br /> |6<br /> |HW0412<br /> |BOLT-SHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |''Included with 80000002''<br /> |12<br /> |-<br /> |7<br /> |H0010<br /> |FITTING-BULKHEAD-3/4-16 X #4 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 NPTM<br /> |<br /> |<br /> |2<br /> |}<br /> ===&lt;u&gt;&lt;big&gt;Carrier Shafts &amp; Bearings ''(Rotary Actuator)''&lt;/big&gt;&lt;/u&gt;===<br /> [[File:BE-TS Rotary Actuator Carrier Shafts.png|alt=BE-TS Carrier Shafts (Rotary Actuator)|frameless|560x560px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43057045<br /> |CARRIER SHAFT-EXTRACTOR ARM<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |2<br /> |43054007<br /> |BEARING-EXTRACTOR ARM CARRIER<br /> |80252002<br /> |''†† See notes''<br /> |4<br /> |-<br /> |3<br /> |HW0412<br /> |BOLT-SHCS-3/8-16 X 1 1/4&quot;<br /> |80252002<br /> |<br /> |16<br /> |-<br /> |4<br /> |PT0413<br /> |COLLAR-SHAFT-3&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |PT0624<br /> |FITTING-ZERK<br /> |80252002<br /> |''Not shown''<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† See Vacuum Extended Reach section for Extended Reach equipped units.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Carrier Shafts &amp; Bearings (Helical Actuator) section for Helical Actuator equipped units.''<br /> |}<br /> <br /> ===&lt;u&gt;&lt;big&gt;Drive Screw Components ''(Rotary Actuator)''&lt;/big&gt;&lt;/u&gt;===<br /> ====''&lt;big&gt;Drive Nut Assembly (Rotary Actuator)&lt;/big&gt;''====<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Drive Nut Assembly Rotary Actuator.png|alt=BE-SL&amp;DS Drive Nut Assembly Rotary Actuator|frameless|537x537px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Drive_Nut_Assembly_Rotary_Actuator.png]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43054006<br /> |DRIVE NUT ASSEMBLY<br /> |80252003<br /> |&lt;sup&gt;''†''&lt;/sup&gt; ''See notes''<br /> |1<br /> |-<br /> |2<br /> |HW0426<br /> |BOLT-SHCS-3/8-16 X 5 1/2&quot;<br /> |80252003<br /> |&lt;sup&gt;''††''&lt;/sup&gt; ''See notes''<br /> |4<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |80252003<br /> |&lt;sup&gt;''††''&lt;/sup&gt; ''See notes''<br /> |4<br /> |-<br /> |4<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |80252003<br /> |&lt;sup&gt;''††''&lt;/sup&gt; ''See notes''<br /> |4<br /> |-<br /> |5<br /> |PT0624<br /> |FITTING-ZERK<br /> |80252003<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''&lt;sup&gt;†&lt;/sup&gt; See Drive Screw Components (Helical Actuator) section for Helical Actuator equipped units.''<br /> |-<br /> | colspan=&quot;6&quot; |''&lt;sup&gt;††&lt;/sup&gt; It is recommended to replace mounting hardware when replacing Drive Nut Assembly.''<br /> |}<br /> ====''&lt;big&gt;Drive Screw&lt;/big&gt;''====<br /> =====''[Current] Drive Screw Assembly (Frame #'s 374 to Present)''=====<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Drive Screw Rotary Current.png|alt=Current BE-SL &amp; BE-DS Drive Screw (Rotary Actuator)|frameless|531x531px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Drive_Screw_Rotary_Current.png]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43024001<br /> |SCREW-LINEAR DRIVE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |PT0119<br /> |SPROCKET-50B15 X 1 3/16&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43097004<br /> |KEY-1/4 X 7/8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |00158001-15<br /> |CHAIN-ROLLER-#50<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |PT0102<br /> |LINK-CONNECTING-#50<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |PT0406<br /> |FLANGE BEARING-4 BOLT-1 3/16&quot;<br /> |<br /> |''Alloy casting''<br /> |2<br /> |-<br /> |7<br /> |HW0503<br /> |BOLT-HHCS-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |PT0107<br /> |SPROCKET-50B15 X 1&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HC0121<br /> |MOTOR-HYDRAULIC-100CC<br /> |<br /> |''SAE 2-Bolt mount''<br /> |1<br /> |-<br /> |11<br /> |H1605<br /> |ADAPTER-90 DEG-#6 JICM X #10 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW1071<br /> |KEY-WOODRUFF-#808 STD<br /> |<br /> |''Supplied with Item 10''<br /> |A/R<br /> |-<br /> |13<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |14<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |15<br /> |43017007<br /> |PLATE-MOUNTING-SCREW DRIVE MOTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |43057019<br /> |PLATE-COVER<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0415<br /> |BOLT-SHCS-3/8-16 X 3/4&quot;<br /> |<br /> |<br /> |8<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> ! colspan=&quot;6&quot; |ITEMS BELOW ARE REQUIRED FOR REPLACING THE LINEAR DRIVE<br /> SCREW ON UNITS WITH FRAME #'S OF 373 AND EARLIER<br /> |-<br /> ! colspan=&quot;6&quot; |LINEAR DRIVE SCREW UPDATE KIT<br /> |-<br /> |REF<br /> |80252011<br /> |UPGRADE KIT<br /> |<br /> |<br /> |1<br /> |-<br /> |1<br /> |43024001<br /> |SCREW-LINEAR DRIVE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |PT0119<br /> |SPROCKET-50B15 X 1 3/16&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43097004<br /> |KEY-1/4 X 7/8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |PT0406<br /> |FLANGE BEARING-4 BOLT-1 3/16&quot;<br /> |<br /> |''Alloy casting''<br /> |2<br /> |-<br /> |7<br /> |HW0503<br /> |BOLT-HHCS-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |16<br /> |43057019<br /> |PLATE-COVER<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |43057022<br /> |SHIM-18GA<br /> |<br /> |''May not be required (Not shown)''<br /> |2<br /> |-<br /> |19<br /> |43057018<br /> |TEMPLATE-BEARING MOUNT PATTERN<br /> |<br /> |''Not shown''<br /> |1<br /> |-<br /> |20<br /> |80000015<br /> |INSTRUCTION DETAIL<br /> |<br /> |''Not shown''<br /> |REF<br /> |-<br /> |21<br /> |43057020<br /> |SPACER PLATE<br /> |<br /> |''Not shown''<br /> |2<br /> |}<br /> =====''[Discontinued] Drive Screw Assembly (Frame #'s 373 and Earlier)''=====<br /> [[File:IOP-400 BE-SL&amp;DS (10-23) Drive Screw (Rotary Actuator) Discontinued.png|alt=Discontinued BE-SL &amp; BE-DS Drive Screw (Rotary Actuator)|frameless|532x532px|link=https://tech.bhs1.com/index.php/File:IOP-400_BE-SL&amp;DS_(10-23)_Drive_Screw_(Rotary_Actuator)_Discontinued.png]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |SCREW-LINEAR DRIVE (DISCONTINUED)<br /> |<br /> |''See 80252011 Upgrade Kit''<br /> |1<br /> |-<br /> |2<br /> |PT0118<br /> |SPROCKET-50B12 X 1 3/16&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43097004<br /> |KEY-1/4&quot; X 7/8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |00158001-15<br /> |CHAIN-ROLLER-#50<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |PT0102<br /> |LINK-CONNECTING-#50<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |43057016<br /> |BLOCK-BEARING RETAINER<br /> |<br /> |<br /> |2<br /> |-<br /> |6a<br /> |PT0414<br /> |RACE-TAPERED ROLLER BEARING<br /> |<br /> |''Included with 43057016''<br /> |2<br /> |-<br /> |7<br /> |PT0623<br /> |SEAL-GREASE<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0416<br /> |BOLT-SHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |PT0415<br /> |BEARING-TAPERED ROLLER<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW1050<br /> |NUT-LOCK<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |43057017<br /> |PLATE-COVER<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0415<br /> |BOLT-SHCS-3/8-16 X 3/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |13<br /> |PT0624<br /> |FITTING-ZERK<br /> |<br /> |<br /> |2<br /> |}<br /> ===&lt;big&gt;&lt;u&gt;Hose Carrier Plate&lt;/u&gt;&lt;/big&gt;===<br /> [[File:BE-TS Hose Carrier Plate.png|alt=BE-TS Hose Carrier Plate|frameless|554x554px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43915018<br /> |PLATE-HOSE CARRIER<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |PT0618<br /> |BRACKET-FIXED END<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |PT0617<br /> |HOSE CARRIER<br /> |<br /> |''20 links required''<br /> |3 FT<br /> |-<br /> |5<br /> |PT0619<br /> |BRACKET-MOVING END<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |9<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |10<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HC0262<br /> |VALVE-CROSS PORT RELIEF<br /> |<br /> |''Includes cartridges''<br /> |1<br /> |-<br /> |12a<br /> |43846002<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''†† For Item 12 (Not shown)''<br /> |2<br /> |-<br /> |13<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |H1560<br /> |ADAPTER-45 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |E1329<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |''PVC - Includes cover''<br /> |1<br /> |-<br /> |19<br /> |HW0212<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |20<br /> |HW0102<br /> |WASHER-FLAT-#10-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |21<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |22<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |23<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |''For Items 21 &amp; 22 (Not shown)''<br /> |3<br /> |-<br /> |24<br /> |HW1076<br /> |BOLT-FHSCS-3/8-16 X 1&quot;<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Units built prior to February 2014 without extended reach option use (4) HW0403 mounting bolts.''<br /> <br /> ''†† Cartridges are for replacement only.''<br /> |}<br /> <br /> === &lt;big&gt;'''&lt;u&gt;Magnet Components ''(Rotary Actuator)''&lt;/u&gt;'''&lt;/big&gt; ===<br /> <br /> ==== '''''&lt;big&gt;[Discontinued] Magnet Arm Configuration&lt;/big&gt;''''' ====<br /> [[File:BE-TS (Discontinued) Magnet Arm Configuration.png|alt=BE-TS (Discontinued) Magnet Arm Configuration|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41257014<br /> |TIE PLATE-SWING ARM<br /> |<br /> |''All units''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |41655008<br /> |EXTENSION-ARM<br /> |<br /> |''BE-36 only (Not shown)''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |43455001<br /> |EXTENSION-ARM<br /> |<br /> |''BE-42 only (Not shown)''<br /> |1<br /> |-<br /> |2<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0113<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0010<br /> |NUT-JAM-5/8-11<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |41655001<br /> |CARRIER TUBE-MAGNET SWING SHAFT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |7<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |9<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |6<br /> |-<br /> |10<br /> |41657006<br /> |SHAFT-MAGNET SWING<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |41698001<br /> |KEY-3/8&quot; X 7/16&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |N/A<br /> |STOP-MAGNET SWING<br /> |<br /> |''† Dicontinued''<br /> |1<br /> |-<br /> |13<br /> |PT0430<br /> |FLANGE BEARING-4 BOLT-1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |HW0513<br /> |BOLT-HHCS-1/2-13 X 2 1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |15<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |16<br /> |-<br /> |16<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |17<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |-<br /> |18<br /> |41655002<br /> |PLATE-MAGNET MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |41257015<br /> |BLOCK-TIGHTENER<br /> |<br /> |''2-piece item''<br /> |1<br /> |-<br /> |20<br /> |41257016<br /> |BLOCK-FIXED<br /> |<br /> |''2-piece item''<br /> |1<br /> |-<br /> |21<br /> |HW0423<br /> |BOLT-SHCS-3/8-16 X 3 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0806<br /> |SET SCREW-3/8-16 X 2&quot;<br /> |<br /> |''Replaces Swivel Head''<br /> |4<br /> |-<br /> |24<br /> |HW0424<br /> |NUT-JAM-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |25<br /> |41657017<br /> |INSULATOR-MAGNET MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |26<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |27<br /> |41657008<br /> |PAD-MAGNET SLIDE<br /> |<br /> |<br /> |2<br /> |-<br /> |28<br /> |HW0314<br /> |BOLT-FHSCS-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Refer to [Current] Magnet Arm Configuration (Rotary Actuator) section for replacement / upgrade parts.''<br /> |}<br /> <br /> ==== '''&lt;big&gt;''[Current] Magnet Arm Configuration (Rotary Actuator)''&lt;/big&gt;''' ====<br /> [[File:BE-TS (Current) Magnet Arm Configuration.png|alt=BE-TS (Current) Magnet Arm Configuration|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |80252012<br /> |MAGNET SWING STOP KIT<br /> |<br /> |''Includes Items 1 through 6''<br /> |A/R<br /> |-<br /> |1<br /> |43057029<br /> |PLATE-STOP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43058003<br /> |SLEEVE-STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |43057030<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |PL0501<br /> |GROMMET-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0509<br /> |BOLT-HHCS-1/2-13 X 4 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |44557003<br /> |PLATE-STOP<br /> |<br /> |''† Single compartment units only''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† For units equipped with Pivot Shaft. See [Current] Magnet Arm Configuration (Rotary Actuator) for units with Independent Magnet Pivot Bearings.'' <br /> |}<br /> '''&lt;big&gt;''Magnet Pivot Stop (Rotary Actuator)''&lt;/big&gt;'''<br /> <br /> [[File:BE-TS Magnet Pivot Stop.png|alt=BE-TS Magnet Pivot Stop|frameless|547x547px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |MAGNET PUSH/PULL ARM<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |43055010<br /> |MAGNET MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |PT0470<br /> |BEARING-MAGNET PIVOT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0525<br /> |BOLT-CARRIAGE-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |5<br /> |HW0524<br /> |BOLT-CARRIAGE-1/2-13 X 2&quot;<br /> |<br /> |''†† Stop Plate location''<br /> |4<br /> |-<br /> |6<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |7<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |16<br /> |-<br /> |8<br /> |43058009<br /> |PLATE-ROTATION STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |43058003<br /> |SLEEVE-STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43058010<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |PL0501<br /> |GROMMET-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |43057037<br /> |INSULATOR-BOTTOM<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |16<br /> |41657008<br /> |SLIDE-MAGNET<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW0314<br /> |BOLT-FHSCS-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |44558001<br /> |PLATE-ROTATION STOP<br /> |<br /> |''†† Single compartment units only''<br /> |2<br /> |-<br /> |REF<br /> |43052014<br /> |ADJUSTABLE PUSH-PULL ARM<br /> |<br /> |''Includes Items 19-23''<br /> |A/R<br /> |-<br /> |19<br /> |43055018<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |20<br /> |43055019<br /> |MAGNET MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |21<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |22<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† 1-Piece Arm no longer available. Must be replaced with Adjustable Arm.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Single compartment Stop Plates require (1) additional 2&quot; long Carriage Bolt each''<br /> |}<br /> <br /> ==== &lt;big&gt;''Magnet Mounting Hardware (Rotary Actuator)''&lt;/big&gt; ====<br /> [[File:BE-TS Magnet Mounting Hardware (Rotary Actuator).png|alt=BE-TS Magnet Mounting Hardware (Rotary Actuator)|frameless|554x554px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43032009<br /> |MAGNET ASSEMBLY<br /> |<br /> |''Includes Items 1 through 12''<br /> |A/R<br /> |-<br /> |1<br /> |N/A<br /> |ELECTROMAGNET-95VDC<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |E0314<br /> |SENSOR-PROXIMITY-30MM<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |N/A<br /> |GASKET-REAR<br /> |<br /> |''Discontinued - Not used''<br /> |2<br /> |-<br /> |4<br /> |41657002<br /> |COVER-PROXIMITY SENSOR HOUSING<br /> |<br /> |''Rear''<br /> |2<br /> |-<br /> |5<br /> |HW1065<br /> |SCREW-SHCS-#6-32 X 3/8&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |6<br /> |HW1066<br /> |WASHER-LOCK-#6<br /> |<br /> |<br /> |8<br /> |-<br /> |7<br /> |E0376<br /> |INDICATOR LIGHT<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |8<br /> |E0335<br /> |RECEPTACLE-5 PIN MALE<br /> |<br /> |''With 12&quot; lead''<br /> |2<br /> |-<br /> |9<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |N/A<br /> |GASKET-FRONT<br /> |<br /> |''Discontinued - Not used''<br /> |2<br /> |-<br /> |11<br /> |41657003<br /> |COVER-PROXIMITY SENSOR HOUSING<br /> |80252015<br /> |''Front''<br /> |2<br /> |-<br /> |12<br /> |HW0138<br /> |SCREW-FHSCS-#8-32 X 3/8&quot;<br /> |80252015<br /> |<br /> |8<br /> |-<br /> |13<br /> |HW0433<br /> |STUD-1/2-13 X 5&quot;<br /> |80252006<br /> | rowspan=&quot;5&quot; |''For units with Magnet Pivot Shaft only.'' <br /> <br /> ''See [Discontinued] Magnet Arm Configuration for units built prior to 11/01/14''<br /> |8<br /> |-<br /> |14<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |80252006<br /> |8<br /> |-<br /> |15<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |80252006<br /> |40<br /> |-<br /> |16<br /> |HW1002<br /> |SPRING-1/2&quot;<br /> |80252006<br /> |24<br /> |-<br /> |17<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |80252006<br /> |8<br /> |-<br /> |18<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |80252014<br /> | rowspan=&quot;4&quot; |''For units with independent Pivot Bearings only.'' <br /> <br /> ''See [Current] Magnet Arm Configuration for units built 11/01/14 to present)''<br /> |4<br /> |-<br /> |19<br /> |HW1002<br /> |SPRING-1/2&quot;<br /> |80252014<br /> |4<br /> |-<br /> |20<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |80252014<br /> |8<br /> |-<br /> |21<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |80252014<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Extractors built or replacement magnets shipped prior to October 2021 used multi-piece indicator lights with replaceable bulb and lens and are no longer available. Current indicator light is a 1-piece LED assembly. Replacement of any multi-piece component requires replacing entire assembly with current, 1-piece indicator light.''<br /> |}<br /> <br /> === '''''Magnet Cords (Rotary Actuator)''''' ===<br /> [[File:BE-TS Magnet Cords.png|alt=BE-TS Magnet Cords|frameless|555x555px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1105<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |''Weather proof box''<br /> |1<br /> |-<br /> |2<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |E1106<br /> |COVER-JUNCTION BOX<br /> |<br /> |''Weather proof with gasket'' <br /> |1<br /> |-<br /> |4<br /> |E0333<br /> |RECEPTACLE-9 PIN MALE<br /> |<br /> |''With 12&quot; lead''<br /> |1<br /> |-<br /> |5<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |6<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |7<br /> |E0334<br /> |CORD-5 PIN FEMALE<br /> |<br /> |''With 36&quot; lead''<br /> |2<br /> |-<br /> |8<br /> |E0332<br /> |CORD-9 PIN FEMALE-90 DEG<br /> |<br /> |''With 36&quot; lead''<br /> |1<br /> |-<br /> |9<br /> |PL0501<br /> |GROMMET-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |41657013-2<br /> |PLATE-PANEL MOUNTING<br /> |<br /> |''With single cable hole''<br /> |1<br /> |-<br /> |11<br /> |E0334-6<br /> |CORD-5 PIN FEMALE<br /> |<br /> |''With 72&quot; lead''<br /> |2<br /> |-<br /> |12<br /> |43057038-2<br /> |PLATE-PANEL MOUNTING<br /> |<br /> |''With dual cable holes''<br /> |1<br /> |}<br /> '''''&lt;big&gt;Magnet Panel Mounting (Rotary Actuator)&lt;/big&gt;'''''<br /> <br /> [[File:BE-TS Panel Mounting (Rotary Actuator).png|alt=BE-TS Panel Mounting (Rotary Actuator)|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43057021<br /> |PLATE-STIFFENER<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |''Not shown''<br /> |24<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |5<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |12<br /> |-<br /> |6<br /> |41637001<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0325<br /> |BOLT-5/16-18 X 1 3/4&quot;-PAN HEAD<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |N/A<br /> |INSULATOR-THREADED FEMALE<br /> |<br /> |''Discontinued''<br /> |4<br /> |-<br /> |9<br /> |HW0106<br /> |WASHER-FLAT-5/16&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0326<br /> |NUT-NILN-5/16-18<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |E1016<br /> |FUSE HOLDER<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |E0325<br /> |FUSE-7AMP-250VAC<br /> |<br /> |''FLM-7 or FNM-7''<br /> |1<br /> |-<br /> |16<br /> |PL0307<br /> |INSULATOR-MALE STUD<br /> |<br /> |<br /> |4<br /> |}<br /> '''''&lt;big&gt;Magnet Extractor Electrical Panel (Rotary Actuator)&lt;/big&gt;'''''<br /> <br /> [[File:BE-TS Magnet Extractor Electrical Panel (Rotary Actuator).png|alt=BE-TS Magnet Extractor Electrical Panel (Rotary Actuator)|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41637001<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41637002<br /> |WIRE WAY<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |41637003<br /> |WIRE WAY<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |41637004<br /> |TRACK-TERMINAL BLOCK MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |41637005<br /> |TRACK-TERMINAL BLOCK MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |<br /> |10<br /> |-<br /> |7<br /> |HW0132<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |<br /> |10<br /> |-<br /> |8<br /> |HW0133<br /> |NUT-NILN-#8-32<br /> |<br /> |''Not shown''<br /> |16<br /> |-<br /> |9<br /> |E1020<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |12<br /> |-<br /> |10<br /> |E1040<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |E1330<br /> |END ANCHOR<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |E1009<br /> |RECTIFIER-FULL WAVE BRIDGE<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |HW0135<br /> |SCREW-RHMS-#8-32 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |E1313<br /> |SOCKET-RELAY-8 PIN<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0139<br /> |SCREW-RHMS-#8-32 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |E0331<br /> |RELAY-DPDT-110VAC<br /> |<br /> |''with Indicator Light''<br /> |2<br /> |}<br /> <br /> === &lt;big&gt;'''&lt;u&gt;Swing Arm Stop (Rotary Actuator)&lt;/u&gt;'''&lt;/big&gt; ===<br /> [[File:BE-TS Swing Arm Stop (Rotary Actuator).png|alt=BE-TS Swing Arm Stop (Rotary Actuator)|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055007<br /> |MOUNT-STOP-SWING ARM<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |2<br /> |43057024<br /> |STOP-SWING ARM<br /> |<br /> |''BE-24''<br /> |4<br /> |-<br /> |43057023<br /> |STOP-SWING ARM<br /> |<br /> |''BE-36 &amp; BE-42''<br /> |4<br /> |-<br /> |3<br /> |HW0304<br /> |BOLT-HHCS-1/4-20 X 1 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† See Vacuum Swing Arm Stop (Rotary Actuator) section for single compartment stop mount and stop.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Extended Reach (Rotary Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Vacuum Extended Reach (Rotary Actuator).png|alt=BE-TS Vacuum Extended Reach (Rotary Actuator)|frameless|536x536px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41257014<br /> |TIE PLATE-SWING ARM<br /> |<br /> |''All units''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |41655008<br /> |EXTENSION-ARM<br /> |<br /> |''BE-36 only (Not shown)''<br /> |1<br /> |-<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |43455001<br /> |EXTENSION-ARM<br /> |<br /> |''BE-42 only (Not shown)''<br /> |1<br /> |-<br /> |2<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |P0301-1<br /> |HOSE-COIL-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |41257035<br /> |STANDOFF<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW1072<br /> |RESTRAINT-HOSE<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0318<br /> |BOLT-SHCS-1/4-20 X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |HW0312<br /> |SCREW-SHSS-1/4-20 X 1&quot;-CUP POINT<br /> |<br /> |<br /> |1<br /> |}<br /> [[File:BE-TS Vacuum Extended Reach (Rotary Actuator) 2.png|alt=BE-TS Vacuum Extended Reach (Rotary Actuator)|frameless|547x547px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41255005<br /> |ARM-EXTENSION-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0416<br /> |CYLINDER-EXTENDED REACH-VACUUM<br /> |<br /> |''2 1/2&quot; X 12&quot; Cylinder''<br /> |1<br /> |-<br /> |3<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JICM X #6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |41257031<br /> |PIN-CLEVIS END<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |00197036<br /> |PIN-ROD END<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1058<br /> |PIN-HITCH<br /> |<br /> |<br /> |4<br /> |}<br /> [[File:BE-TS Vacuum Extended Reach (Rotary Actuator) 3.png|alt=BE-TS Vacuum Extended Reach (Rotary Actuator) 3|frameless|541x541px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41255004<br /> |HOUSING-EXTENDED REACH-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41257030<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |41258002<br /> |PLATE-BEARING<br /> |80258001<br /> |''Side''<br /> |2<br /> |-<br /> |8<br /> |41258005<br /> |PLATE-SHIM<br /> |80258001<br /> |''Side''<br /> |2<br /> |-<br /> |9<br /> |41258003<br /> |PLATE-BEARING<br /> |80258001<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |10<br /> |41258004<br /> |PLATE-SHIM<br /> |80258001<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |11<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |28<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |28<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Extended Reach (Rotary Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Extended Reach Rotary Actuator.png|alt=BE-TS Extended Reach Rotary Actuator|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43046001<br /> |ROTARY ACTUATOR<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |80000002<br /> |ROTARY ACTUATOR BASE ASSEMBLY<br /> |<br /> |''Without Actuator''<br /> |1<br /> |-<br /> |2A<br /> |N/A<br /> |VERTICAL CARRIER PLATE-OUTER<br /> |<br /> |''Included with 80000002''<br /> |2<br /> |-<br /> |2B<br /> |N/A<br /> |VERTICAL CARRIER PLATE-INNER<br /> |<br /> |''Included with 80000002''<br /> |1<br /> |-<br /> |2C<br /> |N/A<br /> |CARRIER BASE PLATE<br /> |<br /> |''Included with 80000002''<br /> |1<br /> |-<br /> |3<br /> |HW1070<br /> |PIN-PULL DOWEL-5/8&quot; X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0508<br /> |BOLT-SHCS-1/2-13 X 3/4&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW1045<br /> |PIN-PULL DOWEL-3/8&quot; X 1 1/2&quot;<br /> |<br /> |''Included with 80000002''<br /> |6<br /> |-<br /> |6<br /> |HW0412<br /> |BOLT-SHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |''Included with 80000002''<br /> |12<br /> |-<br /> |7<br /> |H0010<br /> |FITTING-BULKHEAD-3/4-16 X #4 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |4<br /> |}<br /> [[File:BE-TS Extended Reach Rotary Actuator 2.png|alt=BE-TS Extended Reach Rotary Actuator |frameless|535x535px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |PT0634<br /> |BRACKET-MALE END<br /> |<br /> |''Sols as a set''<br /> |1<br /> |-<br /> |2<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |10<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |PT0627<br /> |HOSE CARRIER<br /> |<br /> |''14 links required''<br /> |39&quot;<br /> |-<br /> |7<br /> |PT0634<br /> |BRACKET-FEMALE END<br /> |<br /> |''Sols as a set''<br /> |1<br /> |-<br /> |8<br /> |HC0262<br /> |VALVE-CROSS PORT RELIEF<br /> |<br /> |<br /> |1<br /> |-<br /> |8a<br /> |43046003<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''† For Item 8 (Not shown)''<br /> |2<br /> |-<br /> |9<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |H1546<br /> |ADAPTER-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |H1617<br /> |ADAPTER-45 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HC0237<br /> |VALVE-SEQUENCING<br /> |<br /> |<br /> |1<br /> |-<br /> |12a<br /> |43046005<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''† For Item 12 (Not shown)''<br /> |A/R<br /> |-<br /> |13<br /> |HW0317<br /> |BOLT-HHCS-1/4-20 X 3 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |H1560<br /> |ADAPTER-45 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |H1600<br /> |ADAPTER-90 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Cartridges are for replacement only''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Extended Reach (Rotary Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Extended Reach (Rotary Actuator).png|alt=BE-TS Magnet Extended Reach (Rotary Actuator)|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055011<br /> |ARM-EXTENSION-MAGNET<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0415<br /> |CYLINDER-EXTENDED REACH-MAGNET<br /> |<br /> |''2 1/2&quot; X 8&quot; Cylinder''<br /> |1<br /> |-<br /> |3<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JICM X #6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CLEVIS END<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-ROD END<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-EXTERNAL-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW1043<br /> |CLAMP-CYLINDER<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |43057044-2<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |43058019<br /> |SUPPORT-CABLE-BAND CLAMP<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> [[File:BE-TS Magnet Extended Reach (Rotary Actuator) 2.png|alt=BE-TS Magnet Extended Reach (Rotary Actuator) |frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055012<br /> |HOUSING-EXTENDED REACH-MAGNET<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |43058013<br /> |PLATE-BEARING-SIDE<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |43058016<br /> |PLATE-SHIM-SIDE<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |43058014<br /> |PLATE-BEARING-UPPER/LOWER<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43058015<br /> |PLATE-SHIM-UPPER/LOWER<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |24<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |24<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Extended Reach End Plate&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Extended Reach End Plate.png|alt=BE-TS Extended Reach End Plate|frameless|552x552px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |CARRIER SHAFT-EXTRACTOR ARM<br /> |<br /> |''† 3-Hole version''<br /> |A/R<br /> |-<br /> |2<br /> |PT0413<br /> |COLLAR-SHAFT-3&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |50057009<br /> |PLATE-END-3 HOLE<br /> |<br /> |''Replacement part only''<br /> |4<br /> |-<br /> |4<br /> |50057010<br /> |SHIM-END PLATE<br /> |<br /> |''†† See notes''<br /> |A/R<br /> |-<br /> |5<br /> |HW1076<br /> |BOLT-FHSCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |6<br /> |43057045<br /> |CARRIER SHAFT-EXTRACTOR ARM<br /> |<br /> |''1-Hole version''<br /> |2<br /> |-<br /> |7<br /> |43017076<br /> |PLATE-END-1 HOLE<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† 3-Hole Carrier Shaft no longer available. Must replace 3-Hole shaft with current, 1-Hole version along with new ennd plates &amp; hardware.'' <br /> |-<br /> | colspan=&quot;6&quot; |''†† Shim quantity varies due to manufacturing tolerances.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Carrier Shafts &amp; Bearings&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Carrier Shafts &amp; Bearings (Helical Actuator).png|alt=BE-TS Carrier Shafts &amp; Bearings (Helical Actuator)|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43057045<br /> |CARRIER SHAFT-EXTRACTOR ARM<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |2<br /> |43054007<br /> |BEARING-EXTRACTOR ARM CARRIER<br /> |80252002<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0412<br /> |BOLT-SHCS-3/8-16 X 1 1/4&quot;<br /> |80252002<br /> |<br /> |16<br /> |-<br /> |4<br /> |PT0413<br /> |COLLAR-SHAFT-3&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |50057010<br /> |SHIM-END PLATE<br /> |<br /> |<br /> |A/R<br /> |-<br /> |6<br /> |43017076<br /> |PLATE-END-1 HOLE<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |PT0624<br /> |FITTING-ZERK<br /> |80252002<br /> |''Not shown''<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† See Extended Reach End Plate section for Extended Reach equipped units.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Drive Nut Assembly (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Drive Nut Assembly (Helical Actuator).png|alt=BE-TS Drive Nut Assembly (Helical Actuator)|frameless|600x600px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43054006<br /> |DRIVE NUT ASSEMBLY<br /> |80252003<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0426<br /> |BOLT-SHCS-3/8-16 X 5 1/2&quot;<br /> |80252003<br /> |''† See notes''<br /> |4<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |80252003<br /> |''† See notes''<br /> |4<br /> |-<br /> |4<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |80252003<br /> |''† See notes''<br /> |4<br /> |-<br /> |5<br /> |PT0624<br /> |FITTING-ZERK<br /> |80252003<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† It is recommended to replce mounting hardware when replacing Drive Nut Assembly.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Swing Arms &amp; Actuator (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;[Discontinued] Helical Actuator&lt;/big&gt;''''' ====<br /> [[File:BE-TS Swing Arms &amp; Actuator (Helical Actuator).png|alt=BE-TS [Discontinued] Swing Arms &amp; Actuator (Helical Actuator)|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |HELICAL ACTUATOR<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |43057046<br /> |ACTUATOR BASE PLATE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43058022<br /> |SPACER-ACTUATOR<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0725<br /> |BOLT-HHCS-3/4-16 X 4-3/4&quot;-GR8<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0066<br /> |NUT-JAM-3/4-16-GR8<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43055013<br /> |SWING ARM-LHS<br /> |<br /> | rowspan=&quot;6&quot; |''†† See notes''<br /> |1<br /> |-<br /> |7<br /> |HW0620<br /> |BOLT-HHCS-5/8-11 X 1-1/4&quot;<br /> |<br /> |6<br /> |-<br /> |8<br /> |HW0013<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |6<br /> |-<br /> |9<br /> |43055014<br /> |SWING ARM-RHS<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1-1/4&quot;<br /> |<br /> |6<br /> |-<br /> |11<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |6<br /> |-<br /> |12<br /> |43042008<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |43042010<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE, LONG<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |H1619<br /> |ADAPTER-90 DEG-#6 JICM X #4 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |H0010<br /> |FITTING-H-BULKHEAD-1/4 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |H1504<br /> |ADAPTER-#6 JICM X #4 NPTM<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |HW1082<br /> |CLAMP-HOSE<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Discontinued Helical Actuator no longer available. Must replace with current Helical Actuator Retro Kit 80252032. See [Current] Helical Actuator.'' <br /> <br /> ''†† Swing arms manufactured prior to January 2022 use 10 bolts &amp; washers per Swing Arm.'' <br /> |}<br /> <br /> ==== '''''&lt;big&gt;[Current] Helical Actuator&lt;/big&gt;''''' ====<br /> [[File:BE-TS (Current) Swing Arms &amp; Actuator (Helical Actuator).png|alt=BE-TS (Current) Swing Arms &amp; Actuator (Helical Actuator)|frameless|544x544px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |N/A<br /> |43052020<br /> |HELICAL ACTUATOR ASSEMBLY<br /> |<br /> |''Includes Items 1 through 17''<br /> |1<br /> |-<br /> |1<br /> |HC0180<br /> |HELICAL ACTUATOR<br /> |80252032<br /> |<br /> |1<br /> |-<br /> |2<br /> |43057046<br /> |ACTUATOR BASE PLATE<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43058022<br /> |SPACER-ACTUATOR<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0725<br /> |BOLT-HHCS-3/4-16 X 4-3/4&quot;-GR8<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0066<br /> |NUT-JAM-3/4-16-GR8<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |43055013<br /> |SWING ARM-LHS<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0620<br /> |BOLT-HHCS-5/8-11 X 1-1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |8<br /> |HW0013<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |9<br /> |43055014<br /> |SWING ARM-RHS<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1-1/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |11<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |12<br /> |43042011<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE, 90 DEG<br /> |80252032<br /> |''† See notes''<br /> |1<br /> |-<br /> |13<br /> |43042012<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE, SHORT<br /> |80252032<br /> |''† See notes''<br /> |1<br /> |-<br /> |14<br /> |H1619<br /> |ADAPTER-90 DEG-#6 JICM X #4 SAEM<br /> |80252032<br /> |<br /> |2<br /> |-<br /> |15<br /> |H0010<br /> |FITTING-H-BULKHEAD-1/4 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |H1504<br /> |ADAPTER-#6 JICM X #4 NPTM<br /> |80252032<br /> |<br /> |1<br /> |-<br /> |17<br /> |H1691<br /> |ADAPTER-45 DEG-#6 JICM X #4 NPTM<br /> |80252032<br /> |''† See notes''<br /> |1<br /> |-<br /> |18<br /> |HW1082<br /> |CLAMP-HOSE<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Hard-Pipes and 45 degree adapter required if replacing discontinued actuator with current Actuator Kit Part # 80252032 required for discontinued actuator replacement.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Swing Arm Stops &amp; Tie Plate&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Swing Arm Stops &amp; Tie Plate (Helical Actuator).png|alt=BE-TS Swing Arm Stops &amp; Tie Plate (Helical Actuator)|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43057050<br /> |TIE PLATE-HELICAL SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0603<br /> |BOLT-FHSCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0113<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0010<br /> |NUT-JAM-5/8-11<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |43057052<br /> |STOP-POLY-SWING ARM<br /> |<br /> |''† See notes''<br /> |4<br /> |-<br /> |6<br /> |HW0441<br /> |BOLT-FHSCS-3/8-16 X 1-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW0031<br /> |NUT-LOCK-3/8-16, DEFORMED THREAD<br /> |<br /> |''† † See notes''<br /> |4<br /> |-<br /> |8<br /> |44555002<br /> |SWING ARM STOP<br /> |<br /> |''Single compartment use only''<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Replacement Poly Stop design updated from Square to Round. Stop Spacers not required with current, Round-Style Stops.''<br /> |-<br /> | colspan=&quot;6&quot; |''† † Deformed Thread Lock Nut replaces Acorn Nut and Split Lock Washer used previously.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Push/Pull Arm Mounting (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Push-Pull Arm Mounting.png|alt=BE-TS Push-Pull Arm Mounting (Helical Actuator)|frameless|542x542px]]<br /> {| class=&quot;wikitable&quot;<br /> ! rowspan=&quot;2&quot; |ITEM<br /> ! rowspan=&quot;2&quot; |BHS PART NUMBER<br /> ! rowspan=&quot;2&quot; |DESCRIPTION<br /> ! rowspan=&quot;2&quot; |REF. KIT NO.<br /> ! rowspan=&quot;2&quot; |NOTES<br /> ! colspan=&quot;3&quot; |NO. REQ<br /> |-<br /> !BE-24<br /> !BE-36<br /> !BE-42<br /> |-<br /> | rowspan=&quot;2&quot; |1<br /> |41655008<br /> |EXTENSION-ARM<br /> |<br /> |''†BE-36 units only''<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |1<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |43455001<br /> |EXTENSION-ARM<br /> |<br /> |''†BE-42 units only''<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |1<br /> |-<br /> |2<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> | colspan=&quot;2&quot; |12<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |12<br /> | colspan=&quot;2&quot; |24<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> | colspan=&quot;2&quot; |12<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |6<br /> | colspan=&quot;2&quot; |12<br /> |-<br /> ! colspan=&quot;8&quot; |NOTES<br /> |-<br /> | colspan=&quot;8&quot; |''† BE-24 units do not utilize an Arm Extension.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Extractor Arm (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Non-Pivoting Vacuum Cup Arm (Helical Actuator)&lt;/big&gt;''''' ====<br /> [[File:BE-TS Non-Pivoting Vacuum Cup Arm (Helical Actuator).png|alt=BE-TS Non-Pivoting Vacuum Cup Arm (Helical Actuator)|frameless|578x578px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0428<br /> |STUD-VACUUM-3/8-16 X 5&quot;<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |2<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |HW-KIT-2<br /> |<br /> |40<br /> |-<br /> |3<br /> |HW1001<br /> |SPRING-3/8&quot;<br /> |HW-KIT-2<br /> |<br /> |24<br /> |-<br /> |4<br /> |HW0006<br /> |NUT-NILN-3/8-16<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0424<br /> |NUT-JAM-3/8-16<br /> |HW-KIT-2<br /> |<br /> |8<br /> |-<br /> |6<br /> |P0402<br /> |HOSE BARB-1/4&quot; X #4 MNPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |REF<br /> |43052014<br /> |ADJUSTABLE PUSH-PULL ARM<br /> |<br /> |''Includes Items 7 through 11''<br /> |A/R<br /> |-<br /> |7<br /> |43055018<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |43055019<br /> |VACUUM CUP MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Pivoting Vacuum Cup Arm (Helical Actuator)&lt;/big&gt;''''' ====<br /> [[File:BE-TS Pivoting Vacuum Cup Arm (Helical Actuator).png|alt=BE-TS Pivoting Vacuum Cup Arm (Helical Actuator)|frameless|525x525px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43052014<br /> |ADJUSTABLE PUSH-PULL ARM<br /> |<br /> |''Includes Items 1 through 5''<br /> |A/R<br /> |-<br /> |1<br /> |43055018<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43055019<br /> |VACUUM CUP MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |43055020<br /> |MOUNT-PIVOT-VACUUM CUP<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |PT0470<br /> |BEARING-PIVOT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0525<br /> |BOLT-CARRIAGE-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |9<br /> |HW0524<br /> |BOLT-CARRIAGE-1/2-13 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |11<br /> |HW0008<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |16<br /> |-<br /> |12<br /> |43058009<br /> |PLATE-ROTATION STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |43058003<br /> |SLEEVE-STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |43058010<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |4<br /> |-<br /> |16<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |43037002-2<br /> |SUPPORT-CABLE RESTRAINT<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |21<br /> |P0506<br /> |ELBOW-STR-90 DEG-#4 NPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |22<br /> |P0402<br /> |HOSE BARB-1/4&quot; X #4 MNPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |23<br /> |43057056-2<br /> |BRACKET-HOSE SUPPORT<br /> |<br /> |<br /> |2<br /> |-<br /> |24<br /> |PL0507<br /> |GROMMET-5/8&quot; I.D.<br /> |<br /> |<br /> |2<br /> |-<br /> |25<br /> |P0302<br /> |HOSE-VACUUM-1/4&quot; I.D.<br /> |<br /> |''2 pieces at 48&quot; each''<br /> |96&quot;<br /> |-<br /> |26<br /> |HW0443<br /> |BOLT-HHCS-3/8-16 X 3-1/2&quot;<br /> |HW-KIT-3<br /> |<br /> |8<br /> |-<br /> |27<br /> |HW1001<br /> |SPRING-3/8&quot;<br /> |HW-KIT-3<br /> |<br /> |16<br /> |-<br /> |28<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |HW-KIT-3<br /> |<br /> |32<br /> |-<br /> |29<br /> |HW0424<br /> |NUT-JAM-3/8-16<br /> |HW-KIT-3<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Cup Rotation Stop (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Vacuum Cup Rotation Stop (Helical Actuator).png|alt=BE-TS Vacuum Cup Rotation Stop (Helical Actuator)|frameless|583x583px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |445558001<br /> |PLATE-ROTATION STOP<br /> |<br /> |''† Single compartment units only''<br /> |2<br /> |-<br /> |2<br /> |HW0525<br /> |BOLT-CARRIAGE-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0524<br /> |BOLT-CARRIAGE-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW0008<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Components (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Vacuum Components (Helical Actuator).png|alt=BE-TS Vacuum Components (Helical Actuator)|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43058021<br /> |STIFFENER PLATE-HELICAL SWING ARM<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |3<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |24<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |5<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |12<br /> |-<br /> |6<br /> |P0005<br /> |PUMP-VACUUM<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |P0207<br /> |VALVE-VACUUM RELEASE<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |P0208<br /> |FILTER-HI FLOW<br /> |<br /> |<br /> |3<br /> |-<br /> |9<br /> |H0011<br /> |NIPPLE-#4 X 2&quot;-BRASS<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |P0502<br /> |TEE-#4 FNPT-BRASS<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |P0506<br /> |ELBOW-STR-90 DEG-#4 NPT-BRASS<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |P0503<br /> |NIPPLE-#4 NPT-BRASS<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |P0402<br /> |HOSE BARB-1/4&quot; X #4 MNPT-BRASS<br /> |<br /> |<br /> |6<br /> |-<br /> |14<br /> |P0111<br /> |FILTER-VACUUM-IN-LINE<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0206<br /> |SCREW-RHMS-#10-32 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |43037014-2<br /> |BRACKET-CABLE RESTRAINT<br /> |<br /> |<br /> |1<br /> |-<br /> |17<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |18<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |21<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |22<br /> |E0624<br /> |CONNECTOR-1/2&quot;<br /> |<br /> |''Includes Lock Nut''<br /> |1<br /> |-<br /> |23<br /> |HW0212<br /> |SCREW-RHMS-#10-24 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Arm (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Arm (Helical Actuator).png|alt=BE-TS Magnet Arm (Helical Actuator)|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43052014<br /> |ADJUSTABLE PUSH-PULL ARM<br /> |<br /> |''Includes Items 1 through 5''<br /> |A/R<br /> |-<br /> |1<br /> |43055018<br /> |ARM BASE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43055019<br /> |VACUUM CUP MOUNT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |43055016<br /> |MOUNT-PIVOT-MAGNET<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |PT0470<br /> |BEARING-PIVOT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0525<br /> |BOLT-CARRIAGE-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |9<br /> |HW0524<br /> |BOLT-CARRIAGE-1/2-13 X 2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |11<br /> |HW0008<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |16<br /> |-<br /> |12<br /> |43058009<br /> |PLATE-ROTATION STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |43058003<br /> |SLEEVE-STOP<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |43058010<br /> |SUPPORT-CABLE<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0523<br /> |BOLT-HHCS-1/2-13 X 4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |16<br /> |HW0008<br /> |NUT-NILN-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |18<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |19<br /> |43037002-2<br /> |SUPPORT-CABLE RESTRAINT<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |21<br /> |E0334-6'<br /> |CORD-5 PIN FEMALE<br /> |<br /> |''With 72&quot; lead''<br /> |2<br /> |-<br /> |22<br /> |E1041<br /> |WIRE LOOM-SPIRAL-3/8&quot;<br /> |<br /> |''2 pieces at 24&quot; each''<br /> |48&quot;<br /> |-<br /> |23<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |2<br /> |-<br /> |24<br /> |43057037<br /> |INSULATOR-BOTTOM<br /> |<br /> |<br /> |2<br /> |-<br /> |25<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |26<br /> |41657008<br /> |SLIDE-MAGNET<br /> |<br /> |<br /> |2<br /> |-<br /> |27<br /> |HW0314<br /> |BOLT-FHSCS-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Assembly (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Assembly (Helical Actuator).png|alt=BE-TS Magnet Assembly (Helical Actuator)|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43032009<br /> |MAGNET ASSEMBLY<br /> |<br /> |''Includes Items 1 through 12''<br /> |A/R<br /> |-<br /> |1<br /> |N/A<br /> |ELECTROMAGNET-95VDC<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |E0314<br /> |SENSOR-PROXIMITY-30MM<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |41657002<br /> |COVER-PROXIMITY SENSOR HOUSING<br /> |<br /> |''Rear''<br /> |2<br /> |-<br /> |4<br /> |HW1065<br /> |SCREW-SHCS-#6-32 X 3/8&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |HW1066<br /> |WASHER-LOCK-#6<br /> |<br /> |<br /> |8<br /> |-<br /> |6<br /> |E0335<br /> |RECEPTACLE-5 PIN MALE<br /> |<br /> |''With 12&quot; lead''<br /> |2<br /> |-<br /> |7<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |E0376<br /> |INDICATOR LIGHT<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |9<br /> |41657003<br /> |COVER-PROXIMITY SENSOR HOUSING<br /> |80252015<br /> |''Front''<br /> |2<br /> |-<br /> |10<br /> |HW0138<br /> |SCREW-FHSCS-#8-32 X 3/8&quot;<br /> |80252015<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |80252014<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW1002<br /> |SPRING-1/2&quot;<br /> |80252014<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |80252014<br /> |<br /> |8<br /> |-<br /> |14<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |80252014<br /> |<br /> |4<br /> |-<br /> |15<br /> |E0336<br /> |METAL OXIDE VARISTOR<br /> |<br /> |''Not shown''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Extractors built or replacement magnets shipped prior to October 2021 used Multi-Piece Indicator Lights with replaceable bulb and lens and are no longer available. Current Indicator Light is a 1-Piece LED assembly. Replacement of any Multi-Piece component requires replacing entire assembly with current, 1-Piece Indicator Light.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Components (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Components (Helical Actuator).png|alt=BE-TS Magnet Components (Helical Actuator)|frameless|534x534px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43058021<br /> |STIFFENER PLATE-HELICAL SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43057051-2<br /> |STIFFENER-MAGNET-HELICAL SWING ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |4<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;<br /> |<br /> |<br /> |24<br /> |-<br /> |5<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |12<br /> |-<br /> |6<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |12<br /> |-<br /> |7<br /> |PL0307<br /> |INSULATOR-MALE STUD<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0106<br /> |WASHER-FLAT-5/16&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |HW0105<br /> |WASHER-LOCK-5/16&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |HW0004<br /> |NUT-HEX-5/16-18<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |12<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |13<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |14<br /> |E1016<br /> |FUSE HOLDER<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |E0325<br /> |FUSE-7 AMP-250VAC<br /> |<br /> |''FLM-7 or FNM-7''<br /> |1<br /> |-<br /> |16<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |17<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Panel (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Magnet Panel (Helical Actuator).png|alt=BE-TS Magnet Panel (Helical Actuator)|frameless|557x557px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41637001<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41637002<br /> |WIRE WAY-SHORT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |41637003<br /> |WIRE WAY-LONG<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |41637004<br /> |TRACK-MOUNTING-SHORT<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |41637005<br /> |TRACK-MOUNTING-LONG<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> | rowspan=&quot;3&quot; |''Mounting track hardware (Not shown)''<br /> |10<br /> |-<br /> |7<br /> |HW0132<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |10<br /> |-<br /> |8<br /> |HW0133<br /> |NUT-NILN-#8-32<br /> |<br /> |16<br /> |-<br /> |9<br /> |E1020<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |12<br /> |-<br /> |10<br /> |E1040<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |E1330<br /> |END ANCHOR<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |E1009<br /> |RECTIFIER-FULL WAVE BRIDGE<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |HW0135<br /> |SCREW-RHMS-#8-32 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |E1313<br /> |SOCKET-RELAY-8 PIN<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |E0331<br /> |RELAY-DPDT-110VAC<br /> |<br /> |''With Indicator Light''<br /> |2<br /> |-<br /> |16<br /> |HW0139<br /> |SCREW-RHMS-#8-32 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Extended Reach Hydraulics (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== &lt;big&gt;''[Discontinued] Helical Actuator''&lt;/big&gt; ====<br /> [[File:BE-TS (Discontinued) Helical Actuator.png|alt=BE-TS (Discontinued) Helical Actuator|frameless|546x546px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43042009<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |H0010<br /> |FITTING-BULKHEAD-3/4-16 X #4 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |43055017<br /> |ELBOW-BULKHEAD<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> | rowspan=&quot;3&quot; |7<br /> |4-48-0402-0402<br /> |HYD HOSE-1/4&quot; X 48&quot; (BE-24 UNITS)<br /> |<br /> | rowspan=&quot;3&quot; |''Cylinder rod-end hose''<br /> | rowspan=&quot;3&quot; |1<br /> |-<br /> |4-54-0402-0402<br /> |HYD HOSE-1/4&quot; X 54&quot; (BE-36 UNITS)<br /> |<br /> |-<br /> |4-56-0402-0402<br /> |HYD HOSE-1/4&quot; X 56&quot; (BE-42 UNITS)<br /> |<br /> |-<br /> | rowspan=&quot;3&quot; |8<br /> |4-38-0402-0402<br /> |HYD HOSE-1/4&quot; X 38&quot; (BE-24 UNITS)<br /> |<br /> | rowspan=&quot;3&quot; |''Cylinder rod-end hose''<br /> | rowspan=&quot;3&quot; |1<br /> |-<br /> |4-44-0402-0402<br /> |HYD HOSE-1/4&quot; X 44&quot; (BE-36 UNITS)<br /> |<br /> |-<br /> |4-46-0402-0402<br /> |HYD HOSE-1/4&quot; X 46&quot; (BE-42 UNITS)<br /> |<br /> |-<br /> |9<br /> |41257035<br /> |STANDOFF-HOSE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW1093<br /> |CLAMP-CABLE-3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0311<br /> |BOLT-FHSCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> ==== &lt;big&gt;''[Current] Helical Actuator''&lt;/big&gt; ====<br /> [[File:BE-TS (Current) Helical Actuator.png|alt=BE-TS (Current) Helical Actuator|frameless|567x567px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43042013<br /> |3/8&quot; TUBE X #6 JIC HARD-PIPE<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |H0010<br /> |FITTING-BULKHEAD-3/4-16 X #4 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |43055021<br /> |ELBOW-BULKHEAD<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> | rowspan=&quot;3&quot; |7<br /> |4-48-0402-0402<br /> |HYD HOSE-1/4&quot; X 48&quot; (BE-24 UNITS)<br /> |<br /> | rowspan=&quot;3&quot; |''Cylinder rod-end hose''<br /> | rowspan=&quot;3&quot; |1<br /> |-<br /> |4-54-0402-0402<br /> |HYD HOSE-1/4&quot; X 54&quot; (BE-36 UNITS)<br /> |<br /> |-<br /> |4-56-0402-0402<br /> |HYD HOSE-1/4&quot; X 56&quot; (BE-42 UNITS)<br /> |<br /> |-<br /> | rowspan=&quot;3&quot; |8<br /> |4-38-0402-0402<br /> |HYD HOSE-1/4&quot; X 38&quot; (BE-24 UNITS)<br /> |<br /> | rowspan=&quot;3&quot; |''Cylinder rod-end hose''<br /> | rowspan=&quot;3&quot; |1<br /> |-<br /> |4-44-0402-0402<br /> |HYD HOSE-1/4&quot; X 44&quot; (BE-36 UNITS)<br /> |<br /> |-<br /> |4-46-0402-0402<br /> |HYD HOSE-1/4&quot; X 46&quot; (BE-42 UNITS)<br /> |<br /> |-<br /> |9<br /> |41257035<br /> |STANDOFF-HOSE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW1093<br /> |CLAMP-CABLE-3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0311<br /> |BOLT-FHSCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Vacuum Extended Reach (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== &lt;big&gt;'''''Non-Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator)'''''&lt;/big&gt; ====<br /> [[File:BE-TS Non-Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator).png|alt=BE-TS Non-Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator)|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |41255005<br /> |ARM-EXTENSION<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |41255004<br /> |HOUSING-EXTENDED REACH<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0416<br /> |CYLINDER-2 1/2&quot; X 12&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CYLINDER-REAR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-CYLINDER-ROD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JIC X # 6 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |28<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |28<br /> |-<br /> |15<br /> |41258002<br /> |PLATE-BEARING<br /> |80258001<br /> |''Side''<br /> |2<br /> |-<br /> |16<br /> |41258005<br /> |PLATE-SHIM<br /> |80258001<br /> |''Side''<br /> |2<br /> |-<br /> |17<br /> |41258003<br /> |PLATE-BEARING<br /> |80258001<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |18<br /> |41258004<br /> |PLATE-SHIM<br /> |80258001<br /> |''Upper / lower''<br /> |2<br /> |}<br /> &lt;big&gt;'''''Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator)'''''&lt;/big&gt;<br /> <br /> [[File:BE-TS Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator).png|alt=BE-TS Pivoting Cup Extended Reach Vacuum Arm (Helical Actuator)|frameless|553x553px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055011<br /> |ARM-EXTENSION<br /> |<br /> |''Pivoting cup only''<br /> |1<br /> |-<br /> |2<br /> |43055012<br /> |HOUSING-EXTENDED REACH<br /> |<br /> |''Pivoting cup only''<br /> |1<br /> |-<br /> |3<br /> |HC0415<br /> |CYLINDER-2 1/2&quot; X 8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CYLINDER-REAR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-CYLINDER-ROD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JIC X # 6 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |24<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |24<br /> |-<br /> |15<br /> |43058013<br /> |PLATE-BEARING<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |16<br /> |43058016<br /> |PLATE-SHIM<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |17<br /> |43058014<br /> |PLATE-BEARING<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |18<br /> |43058015<br /> |PLATE-SHIM<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |19<br /> |HW1043<br /> |CLAMP-CYLINDER<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |43058019<br /> |SUPPORT-CABLE-BAND CLAMP<br /> |<br /> |<br /> |2<br /> |-<br /> |21<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |22<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |23<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |24<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Magnet Extended Reach (Helical Actuator)&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== &lt;big&gt;'''''[Discontinued] Extended Reach Magnet Arm (Helical Actuator)'''''&lt;/big&gt; ====<br /> [[File:BE-TS (Discontinued) Extended Reach Magnet Arm (Helical Actuator).png|alt=BE-TS (Discontinued) Extended Reach Magnet Arm (Helical Actuator)|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43055011<br /> |ARM-EXTENSION<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43055012<br /> |HOUSING-EXTENDED REACH<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0415<br /> |CYLINDER-2 1/2&quot; X 8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CYLINDER-REAR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-CYLINDER-ROD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JIC X # 6 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |24<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |24<br /> |-<br /> |15<br /> |43058013<br /> |PLATE-BEARING<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |16<br /> |43058016<br /> |PLATE-SHIM<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |17<br /> |43058014<br /> |PLATE-BEARING<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |18<br /> |43058015<br /> |PLATE-SHIM<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |19<br /> |HW1043<br /> |CLAMP-CYLINDER<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |43058019<br /> |SUPPORT-CABLE-BAND CLAMP<br /> |<br /> |<br /> |2<br /> |-<br /> |21<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |24<br /> |43057004-2<br /> |SUPPORT-CABLE-MAGNET<br /> |<br /> |<br /> |2<br /> |}<br /> &lt;big&gt;'''''[Current] Extended Reach Magnet Arm (Helical Actuator)'''''&lt;/big&gt;<br /> <br /> [[File:BE-TS (Current) Extended Reach Magnet Arm (Helical Actuator).png|alt=BE-TS (Current) Extended Reach Magnet Arm (Helical Actuator)|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |50055004<br /> |ARM-EXTENSION<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |50055005<br /> |HOUSING-EXTENDED REACH<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0415<br /> |CYLINDER-2 1/2&quot; X 8&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |43057042<br /> |PIN-CYLINDER-REAR<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |43057043<br /> |PIN-CYLINDER-ROD<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW1132<br /> |RETAINING RING-3/4&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |H1578<br /> |ADAPTER-90 DEG-#6 JIC X # 6 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |50057008<br /> |PLATE-END<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0812<br /> |SCREW-SHSS-1/4-20 X 5/8&quot;-HALF DOG<br /> |<br /> |<br /> |20<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |20<br /> |-<br /> |15<br /> |50058009<br /> |PLATE-BEARING<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |16<br /> |50058012<br /> |PLATE-SHIM<br /> |<br /> |''Side''<br /> |2<br /> |-<br /> |17<br /> |50058010<br /> |PLATE-BEARING<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |18<br /> |50058011<br /> |PLATE-SHIM<br /> |<br /> |''Upper / lower''<br /> |2<br /> |-<br /> |19<br /> |HW1043<br /> |CLAMP-CYLINDER<br /> |<br /> |<br /> |2<br /> |-<br /> |20<br /> |43058019<br /> |SUPPORT-CABLE-BAND CLAMP<br /> |<br /> |<br /> |2<br /> |-<br /> |21<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |23<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |24<br /> |43057004-2<br /> |SUPPORT-CABLE-MAGNET<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> == &lt;big&gt;Drive and Idler Wheels&lt;/big&gt; ==<br /> <br /> === &lt;big&gt;&lt;u&gt;Drive Wheel Mounting&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Drive Wheel Mounting.png|alt=BE-TS Drive Wheel Mounting|frameless|519x519px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0503<br /> |BOLT-HHCS-1/2-13 X 1 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |2<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |''Cylinder Bracket bolt only''<br /> |2<br /> |-<br /> |3<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> === &lt;big&gt;&lt;u&gt;'''Drive Wheel Motors'''&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Drive Wheel Motors.png|alt=BE-TS Drive Wheel Motors|frameless|535x535px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> | rowspan=&quot;2&quot; |1<br /> |43822001-6B<br /> |FLOOR DRIVE ASSEMBLY (W/ 200CC MOTOR)<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |43822004-6B<br /> |FLOOR DRIVE ASSEMBLY (W/ 400CC MOTOR)<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |2<br /> |43827004<br /> |PLATE-MOTOR MOUNTING<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0416<br /> |BOLT-SHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |5<br /> |H1612<br /> |ADAPTER-90 DEG-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |N/A<br /> |ROD-THREADED-1/2-13 X 7 3/4&quot;<br /> |<br /> |''†† See notes''<br /> |8<br /> |-<br /> |7<br /> |N/A<br /> |SPACER-DRIVE WHEEL-4.75&quot; LG<br /> |<br /> |''†† See notes''<br /> |8<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |-<br /> |10<br /> |43827006<br /> |SPACER-DRIVE WHEEL-4.125&quot; LG<br /> |<br /> |Must be ordered as a set of 4<br /> |8<br /> |-<br /> |11<br /> |HW0516<br /> |BOLT-HHCS-1/2-13 X 6 1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |12<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> | rowspan=&quot;2&quot; |13<br /> |N/A<br /> |MOTOR-HYDRAULIC-200CC<br /> |<br /> |''††† Keyed Shaft''<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |N/A<br /> |MOTOR-HYDRAULIC-400CC<br /> |<br /> |''††† Keyed Shaft''<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |14<br /> |HW1071<br /> |KEY-WOODRUFF-#808 STD<br /> |<br /> |<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |15<br /> |HC0124-6B<br /> |MOTOR-HYDRAULIC-200CC<br /> |<br /> |''† Spline Shaft''<br /> |2<br /> |-<br /> |HC0126-6B<br /> |MOTOR-HYDRAULIC-400CC<br /> |80322003<br /> |''† Spline Shaft''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† 200CC Motors required for units equipped with Parallel Drive Circuit.''<br /> ''400CC Motors required for units equipped with Series Drive Circuit.''<br /> <br /> See Cross Port Relief section to determine if unit is Parallel or Series equipped and approximate effectivity of each type.<br /> |-<br /> | colspan=&quot;6&quot; |''†† Parts obsolete and no longer available. Must replace with Items 10 &amp; 11.''<br /> |-<br /> | colspan=&quot;6&quot; |''††† Parts obsolete and no longer available. Must replace with Spline Drive Conversion Kit.''<br /> |}<br /> <br /> === &lt;big&gt;&lt;u&gt;'''Drive Wheel Bearings'''&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Drive Wheel Bearings.png|alt=BE-TS Drive Wheel Bearings|frameless|537x537px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43825001<br /> |FRAME-FLOOR DRIVE<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |C0510-1<br /> |WHEEL-10&quot; X 5&quot;-POLY<br /> |80322001<br /> |<br /> |2<br /> |-<br /> |3<br /> |43822003<br /> |SHAFT-WHEEL (W/ COUPLING BODY)<br /> |<br /> |''Available in multiple kits''<br /> |2<br /> |-<br /> |4<br /> |43897004<br /> |KEY-3/8&quot; X 4 3/4&quot;<br /> |80322001<br /> |<br /> |2<br /> |-<br /> |5<br /> |PT0430<br /> |FLANGE BEARING-4 BOLT-1 1/2&quot;<br /> |80322001<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |7<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |16<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |16<br /> |-<br /> |9<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |16<br /> |-<br /> |10<br /> |PT0321<br /> |CHAIN-COUPLING-#50<br /> |<br /> |''Includes connecting pin''<br /> |2<br /> |-<br /> |11<br /> |N/A<br /> |COUPLING BODY-TAPER BORE-#50<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |12<br /> |N/A<br /> |BUSHING-TAPER LOCK-1&quot;<br /> |<br /> |''† See notes''<br /> |2<br /> |-<br /> |13<br /> |HW0323<br /> |BOLT-HHCS-5/16-18 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |14<br /> |PT0330<br /> |COUPLING BODY-#50-SPLINE BORE<br /> |80322003<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW1110<br /> |RETAINING RING-1 1/2&quot;-HEAVY DUTY<br /> |<br /> |''†† Available in multiple kits''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Parts obsolete and no longer available. Spline Drive Conversion Kit required. Reuse of bushing after disassembly not recommended.'' <br /> |-<br /> | colspan=&quot;6&quot; |''† † Retaining Rings used on units shipped after 7/01/12. Units shipped from 7/01/13 are equipped with (2) Retaining Rings per shaft - (1) on each side of the wheel. Units shipped after 11/01/13 are equipped with only (1) Snap Rings as shown. Second Snap Ring is no longer used or required.''<br /> |-<br /> | colspan=&quot;6&quot; |''NOTE: Effectivity dates refer to dates new extractor units are shipped from the factory. Replacement part effectivity &lt;u&gt;'''may'''&lt;/u&gt; differ due to factory inventory levels at time of parts order. Consult factory if unsure of parts needed.''<br /> |}<br /> <br /> === &lt;big&gt;&lt;u&gt;'''Drive Wheel Assembly'''&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Drive Wheel Assembly.png|alt=BE-TS Drive Wheel Assembly|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43822005<br /> |RADIAL PISTON DRIVE WHEEL ASSEMBLY<br /> |<br /> |''Includes Items 1 through 6''<br /> |2<br /> |-<br /> |1<br /> |43825003<br /> |RADIAL PISTON DRIVE WHEEL MOUNT<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0160-1<br /> |400CC RADIAL PISTON MOTOR<br /> |<br /> |''Includes nuts &amp; studs''<br /> |1<br /> |-<br /> |REF<br /> |HC0160-STUD<br /> |STUD-M14-1.5 X 46MM<br /> |<br /> |''Replacement motor stud''<br /> |A/R<br /> |-<br /> |REF<br /> |HC0160-NUT<br /> |NUT-FLANGED HEX-M14-1.5<br /> |<br /> |''Replacement motor nut''<br /> |A/R<br /> |-<br /> |3<br /> |C0511<br /> |WHEEL-POLY-10 X 5&quot;-FLANGE MOUNT<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |5<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |6<br /> |-<br /> |7<br /> |H1612<br /> |ADAPTER-H-90 DEG-#10 SAEM X #8 JICM<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |H1539<br /> |ADAPTER-#8 JIC X #6 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1586<br /> |ADAPTER-90 DEG-#8 JICSW X #6 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |H0801<br /> |TEE-H-#6 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H1501<br /> |ADAPTER-#8 JIC X #6 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |H0200<br /> |REDUCER-#6 NPT X #4 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |H0206<br /> |PLUG-#4 NPT<br /> |<br /> |''† Left Drive Wheel only''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Plug used on Left Drive Wheel Assembly only. Hose from Left Drive Wheel Assembly is connected to tee on Right Drive Wheel Assembly.'' <br /> |}<br /> <br /> === &lt;big&gt;&lt;u&gt;'''Idler Casters'''&lt;/u&gt;&lt;/big&gt; ===<br /> [[File:BE-TS Idler Casters.png|alt=BE-TS Idler Casters|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |C0500-1<br /> |CASTER-RIGID-10&quot; X 5&quot;-POLY<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW0504<br /> |BOLT-HHCS-1/2-13 X 2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |3<br /> |HW0514<br /> |BOLT-HHCS-1/2-13 X 2 1/2&quot;<br /> |<br /> |''For Cylinder Bracket position'' <br /> |2<br /> |-<br /> |4<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |16<br /> |-<br /> |5<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |6<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |8<br /> |}<br /> <br /> == &lt;big&gt;Electrical&lt;/big&gt; ==<br /> <br /> === '''&lt;u&gt;&lt;big&gt;AC Power Stanchion&lt;/big&gt;&lt;/u&gt;''' ===<br /> <br /> ==== '''&lt;big&gt;''Aero-Motive Energy Rail''&lt;/big&gt;''' ====<br /> [[File:BE-TS Aero-Motive Energy Rail.png|alt=BE-TS Aero-Motive Energy Rail|frameless|536x536px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43835001<br /> |STANCHION-POWER<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HW0511<br /> |BOLT-HHCS-1/2-13 X 3 3/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |46837014-2<br /> |TOW ARM-COLLECTOR TROLLEY<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |46838015<br /> |SPACER BLOCK-TOW ARM<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW1030<br /> |U-BOLT-3/8-16 X 2&quot; X 5&quot;-SQUARE BEND<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .625&quot; to .750&quot;''<br /> |1<br /> |-<br /> |13<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |HW1051<br /> |EYE BOLT-3/8-16 X 5 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HW0126<br /> |WASHER-FLAT-3/8&quot;-FENDER<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |BD0010<br /> |TROLLEY-ENERGY RAIL<br /> |<br /> | rowspan=&quot;2&quot; |''Aero-Motive Rail only''<br /> <br /> ''(orange housing color)''<br /> |1<br /> |-<br /> |19<br /> |BD0100<br /> |BRUSH-TROLLEY<br /> |<br /> |4<br /> |}<br /> <br /> ==== '''&lt;big&gt;''Vahle Energy Rail''&lt;/big&gt;''' ====<br /> [[File:BE-TS Vahle Energy Rail.png|alt=BE-TS Vahle Energy Rail|frameless|535x535px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1A<br /> |BD0031<br /> |TROLLEY-ENERGY RAIL, KSL<br /> |<br /> | rowspan=&quot;3&quot; |''† Vahle KSL Rail only''<br /> <br /> ''(green housing color)''<br /> |1<br /> |-<br /> |2A<br /> |BD0040<br /> |BRUSH-PHASE, KSL<br /> |<br /> |3<br /> |-<br /> |3A<br /> |BD0041<br /> |BRUSH-GROUND, KSL<br /> |<br /> |1<br /> |-<br /> |1B<br /> |BD0231<br /> |TROLLEY-ENERGY RAIL, KBH<br /> |<br /> | rowspan=&quot;3&quot; |''† Vahle KBH Rail only''<br /> <br /> ''(gray housing color)''<br /> <br /> ''(Nots shown)''<br /> |1<br /> |-<br /> |2B<br /> |BD0240<br /> |BRUSH-PHASE, KBH<br /> |<br /> |3<br /> |-<br /> |3B<br /> |BD0241<br /> |BRUSH-GROUND, KBH<br /> |<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |4<br /> |BD0030<br /> |TOW ARM-COLLECTOR TROLLEY, KSL<br /> |<br /> |''† Vahle KSL Rail only''<br /> <br /> ''(green housing color)''<br /> |1<br /> |-<br /> |BD0230<br /> |TOW ARM-COLLECTOR TROLLEY, KBH<br /> |<br /> |''† Vahle KBH Rail only''<br /> <br /> ''(gray housing color)''<br /> |1<br /> |-<br /> |5<br /> |46838015<br /> |SPACER-BLOCK-TOW ARM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |6<br /> |41237083-2<br /> |BRACKET-TOW ARM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |7<br /> |HW1054<br /> |U-BOLT-5/16-18 X 2&quot; X 5&quot;-SQUARE BEND<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW0323<br /> |BOLT-HHCS-5/16-18 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0106<br /> |WASHER-FLAT-5/16&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HW0150<br /> |WASHER-FLAT-5/16&quot;-FENDER<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0105<br /> |WASHER-LOCK-5/16&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0004<br /> |NUT-HEX-5/16-18<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Verify Energy Rail type (KSL OR KBH) by the color of the energy rail housing.'' <br /> |-<br /> | colspan=&quot;6&quot; |''†† Not all units equipped with Tow Arm Bracket. Location of Spacer Block and/or Tow Arm Bracket may vary from configuration shown.'' <br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Control Panel&lt;/big&gt;&lt;/u&gt;''' ===<br /> '''&lt;big&gt;''[Discontinued] Control Panel for Units with 10 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS (Discontinued) Control Panel for Units with 10HP.png|alt=BE-TS (Discontinued) Control Panel for Units with 10HP|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-CONTROL PANEL-16&quot; X 14&quot; X 6&quot;<br /> |<br /> |CONSULT FACTORY<br /> |1<br /> |-<br /> |2<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |Grip size .250&quot; to.375&quot;<br /> |1<br /> |-<br /> |6<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |Grip size .625&quot; to .750&quot;<br /> |2<br /> |-<br /> |7<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |Grip size .500&quot; to .625&quot;<br /> |2<br /> |-<br /> |8<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |''Not shown''<br /> |1<br /> |-<br /> |9<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |''Not shown''<br /> |4<br /> |}<br /> [[File:BE-TS (Discontinued) Control Panel for Units with 10HP Detail.png|alt=BE-TS (Discontinued) Control Panel for Units with 10HP Detail|frameless|556x556px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0640<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |BLANK PANEL WITHOUT HOLES<br /> |1<br /> |-<br /> |2<br /> |E0120<br /> |MAGNETIC STARTER-NEMA 1 3/4&quot;<br /> |<br /> |WITH OVERLOAD<br /> |1<br /> |-<br /> |3<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |<br /> |17<br /> |-<br /> |4<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |<br /> |17<br /> |-<br /> |5<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |17<br /> |-<br /> |6<br /> |E0207-1<br /> |TRANSFORMER<br /> |<br /> |480VAC TO 120VAC, 0.75 Kva<br /> |1<br /> |-<br /> |7<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |HW0003<br /> |NUT-NILN-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |E1023<br /> |WIREWAY<br /> |<br /> |SOLD BY LENGTH<br /> |A/R<br /> |-<br /> |11<br /> |E1024<br /> |MOUNTING TRACK<br /> |<br /> |SOLD BY LENGTH<br /> |A/R<br /> |-<br /> |12<br /> |E1020<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |16<br /> |-<br /> |13<br /> |E1040<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |14<br /> |E1330<br /> |END ANCHOR<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |E0341<br /> |GROUND LUG<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |E0902<br /> |FUSE-6A<br /> |<br /> |FLM-6<br /> |1<br /> |}<br /> <br /> ==== '''&lt;big&gt;''[Current] Control Panel for Units with 20 HP Power Unit''&lt;/big&gt;''' ====<br /> [[File:BE-TS (Current) Control Panel for Units with 20HP.png|alt=BE-TS (Current) Control Panel for Units with 20HP|frameless|601x601px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-24&quot; X 16&quot; X 6&quot;<br /> |<br /> |CONSULT FACTORY<br /> |1<br /> |-<br /> |2<br /> |E0123-1<br /> |HANDLE-DISCONNECT<br /> |<br /> |INCL. MOUNTING SCREWS<br /> |1<br /> |-<br /> |3<br /> |E0662<br /> |RESTRAINT-3/4&quot;-LIQUID TIGHT<br /> |<br /> |INCL. LOCKNUT<br /> |1<br /> |-<br /> |4<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |GRIP SIZE .500&quot; TO .625&quot;<br /> |2<br /> |-<br /> |5<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |GRIP SIZE .625&quot; TO .750&quot;<br /> |1<br /> |-<br /> |6<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |7<br /> |E0661<br /> |RESTRAINT-3/4&quot;-90 DEG-LIQUID TIGHT<br /> |<br /> |INCL. LOCKNUT<br /> |1<br /> |-<br /> |8<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |GRIP SIZE .250&quot; TO .375&quot;<br /> |1<br /> |-<br /> |9<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |GRIP SIZE .450&quot; TO .560&quot;<br /> |2<br /> |-<br /> |10<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |11<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |}<br /> [[File:BE-TS (Current) Control Panel for Units with 20HP Details.png|alt=BE-TS (Current) Control Panel for Units with 20HP Details|frameless|645x645px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |YE0506<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |''Blank panel without holes''<br /> |1<br /> |-<br /> |2<br /> |YE0205-1<br /> |SWITCH-DISCONNECT-80A<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |43036007<br /> |SHAFT-DISCONNECT<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |YE0409<br /> |FUSE HOLDER-SINGLE POLE<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |E0914<br /> |FUSE-10A<br /> |<br /> |''FLM-10''<br /> |1<br /> |-<br /> |6<br /> |E0902<br /> |FUSE-6A<br /> |<br /> |''FLM-6''<br /> |1<br /> |-<br /> |7<br /> |E0903<br /> |FUSE-12A<br /> |<br /> |''FLM-12''<br /> |1<br /> |-<br /> |8<br /> |YE0402<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |17<br /> |-<br /> |9<br /> |YE0405<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |YE0406<br /> |END ANCHOR<br /> |<br /> |<br /> |6<br /> |-<br /> |11<br /> |E0136<br /> |FUSE HOLDER-3 POLE<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |YE0901<br /> |FUSE-40A<br /> |<br /> |JTD-40-ID<br /> |3<br /> |-<br /> |13<br /> |E1013<br /> |BASE-RELAY<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |E1012<br /> |RELAY-11 PIN<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |E0137<br /> |FUSE HOLDER-2 POLE<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |YE0902<br /> |FUSE-10A<br /> |<br /> |''KLDR-10''<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |17<br /> |N/A<br /> |CONTACTOR, &quot;A40&quot; SERIES<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |E0132-1<br /> |CONTACTOR, &quot;AF38&quot; SERIES<br /> |80332009<br /> |<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |18<br /> |N/A<br /> |OVERLOAD, &quot;TA&quot; SERIES<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |E0131-1<br /> |OVERLOAD, &quot;TF&quot; SERIES<br /> |80332009<br /> |<br /> |1<br /> |-<br /> |19<br /> |E1023<br /> |WIREWAY<br /> |<br /> |''Sold by length''<br /> |A/R<br /> |-<br /> |20<br /> |E0908<br /> |MOUNTING RAIL<br /> |<br /> |''Sold by length''<br /> |A/R<br /> |-<br /> |21<br /> |E1070<br /> |GROUND BAR-4 POSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |22<br /> |E1071<br /> |GROUND BAR-7 POSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |23<br /> |HW1061<br /> |SCREW-RHMS-#8-32 X 1&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |24<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> | rowspan=&quot;3&quot; |''Track and Wireway mounting hardware (Not shown)''<br /> |14<br /> |-<br /> |25<br /> |HW0133<br /> |WASHER-FLAT-#8<br /> |<br /> |14<br /> |-<br /> |26<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |17<br /> |-<br /> |27<br /> |E0139<br /> |AUXILIARY CONTACT BLOCK<br /> |80332009<br /> |''†† See notes''<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† &quot;A40&quot; Series Contactor and &quot;TA&quot; Series Overload no longer available as of mid-March 2022. Components must be replaced with current Overload &amp; Relay Kit 80332009.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Auxiliary contact Block required for units equipped with &quot;AF38&quot; Series Contactor &amp; &quot;TF&quot; Series Overload.''<br /> |}<br /> <br /> === '''&lt;u&gt;&lt;big&gt;Transformer&lt;/big&gt;&lt;/u&gt;''' ===<br /> '''&lt;big&gt;''Transformer for Units with 20 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS Transformer for Units with 20HP.png|alt=BE-TS Transformer for Units with 20HP|frameless|554x554px]]<br /> <br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0220<br /> |TRANSFORMER<br /> |<br /> |''480VAC to 120VAC, 3kVA''<br /> |1<br /> |-<br /> |2<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |3<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |7<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |3<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;Operator Console&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Operator Console Electrical.png|alt=BE-TS Operator Console Electrical|frameless|543x543px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0327<br /> |KEYED ACTUATOR ASSEMBLY<br /> |<br /> |''Includes 2 Keys &amp; Contact Block'' <br /> |1<br /> |-<br /> |2<br /> |E0351<br /> |KEY-REPLACEMENT<br /> |<br /> |''Set of 2 Keys''<br /> |A/R<br /> |-<br /> |3<br /> |E0309-1<br /> |HOUR METER<br /> |<br /> |''† Includes mounting hardware''<br /> |1<br /> |-<br /> |4<br /> |N/A<br /> |SWITCH-SELECTOR-3 POSITION<br /> |<br /> |''ON-OFF-ON, †† See notes''<br /> |1<br /> |-<br /> | rowspan=&quot;2&quot; |5<br /> |N/A<br /> |LEGEND PLATE-VACUUM<br /> |<br /> |''††† See notes''<br /> |1<br /> |-<br /> |N/A<br /> |LEGEND PLATE-MAGNET<br /> |<br /> |''††† See notes''<br /> |1<br /> |-<br /> |6<br /> |N/A<br /> |CONTACT BLOCK-N/O<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |7<br /> |N/A<br /> |CONTACT BLOCK-N/C<br /> |<br /> |''†† See notes''<br /> |2<br /> |-<br /> |8<br /> |E1083<br /> |SWITCH-SELECTOR-3 POSITION<br /> |80232001<br /> |''OFF-ON-OFF''<br /> |1<br /> |-<br /> |9<br /> |E1080<br /> |CONTACT BLOCK-N/O &amp; N/C<br /> |80232001<br /> |<br /> |2<br /> |-<br /> |10<br /> |YE0311<br /> |SWITCH-EMERGENCY STOP<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |YE0407<br /> |LEGEND PLATE-EMERGENCY STOP<br /> |<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Current Hour Meter is 3-Bolt version. Replacement of 4-Bolt version will require new mounting holes to be drilled in dashboard.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Parts no longer available. Must order new Selector Switch Kit 80232001''<br /> |-<br /> | colspan=&quot;6&quot; |''††† Parts no longer available. See Labels &amp; Placards section for current Placards''<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;Foot Switch&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Foot Switch Electrical.png|alt=BE-TS Foot Switch Electrical|frameless|701x701px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0301-1<br /> |SWITCH-FOOT OPERATED<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .500&quot; to .625&quot;''<br /> |1<br /> |-<br /> |3<br /> |E0515<br /> |CORD-14-3-SO/SOW<br /> |<br /> |<br /> |9'<br /> |-<br /> |4<br /> |HC0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |''If equipped''<br /> |2<br /> |-<br /> |5<br /> |HC0103<br /> |WASHER-1/4&quot;-LOCK<br /> |<br /> |''If equipped''<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Open-Style Switch is a direct replacement for discontinued, Covered-Style Switch.'' <br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''Gate Switch'''&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Gate Switch Electrical.png|alt=BE-TS Gate Switch Electrical|frameless|613x613px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0312<br /> |SWITCH-PUSH BUTTON<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43017041<br /> |MOUNT-GATE SWITCH<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW1077<br /> |SCREW-RHMS-#10-24 X 5/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0307<br /> |BOLT-SHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |PL0502<br /> |GROMMET-3/8&quot; I.D.<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |YE0305<br /> |SWITCH-ROLLER<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |SS0303<br /> |WASHER-FLAT-#8<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |SS0111<br /> |SCREW-SHCS-#8-32 X 1 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |SS0203<br /> |NUT-NILN-#8-32<br /> |<br /> |<br /> |2<br /> |-<br /> |12<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''Proximity Switch'''&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Proximity Switch Electrical.png|alt=BE-TS Proximity Switch Electrical|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0314<br /> |SENSOR-PROXIMITY-30MM<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43017027-2<br /> |BRACKET-PROXIMITY SENSOR<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0306<br /> |BOLT-FHSCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> | rowspan=&quot;2&quot; |6<br /> |43017037-2<br /> |ANGLE-PROXIMITY SENSOR TARGET<br /> |<br /> |''Rotary Actuator units'' <br /> |1<br /> |-<br /> |43017084-2<br /> |ANGLE-PROXIMITY SENSOR TARGET<br /> |<br /> |''Helical Actuator units'' <br /> |1<br /> |-<br /> |7<br /> |HW0341<br /> |BOLT-FHSCS-1/4-20 X 5/8&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''120V Receptacle'''&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Proximity Switch Electrical.png|alt=BE-TS Proximity Switch Electrical|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |3<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0650<br /> |RECEPTACLE-DUPLEX<br /> |<br /> |''† 20A''<br /> |1<br /> |-<br /> |5<br /> |E0651<br /> |COVER-RECEPTACLE-DUPLEX<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0655<br /> |RECEPTACLE-GFCI<br /> |<br /> |''20A''<br /> |1<br /> |-<br /> |7<br /> |E0656<br /> |COVER-RECEPTACLE-GFCI<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |E0654<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |E0657<br /> |COVER-RECEPTACLE-DUPLEX/GFCI<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |''Mounting hardware (Not shown)''<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† If Duplex Receptacle has Split Feed (1 set of black &amp; white wires for each plug), the Break-Off Fin must be removed prior to installation.'' <br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''Console Enclosure'''&lt;/big&gt;&lt;/u&gt; ===<br /> <br /> ==== '''&lt;big&gt;''[Discontinued] Operator Console Enclosure for Units with 10 HP Power Unit''&lt;/big&gt;''' ====<br /> [[File:BE-TS (Discontinued) Operator Console Enclosure for Units with 10 HP Power Unit.png|alt=BE-TS (Discontinued) Operator Console Enclosure for Units with 10 HP Power Unit|frameless|548x548px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-6&quot; X 6&quot; X 4 &quot;<br /> |<br /> |''Consult factory''<br /> |1<br /> |-<br /> |2<br /> |E0622<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |1<br /> |-<br /> |3<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .450&quot; to .560&quot;''<br /> |2<br /> |-<br /> |4<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |5<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |1<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |8<br /> |43817087-2<br /> |BRACKET-MOUNTING-ENCLOSURE<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> | rowspan=&quot;4&quot; |''Mounting bracket hardware (Not shown)''<br /> |2<br /> |-<br /> |10<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |2<br /> |-<br /> |12<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |2<br /> |}<br /> '''&lt;big&gt;''[Discontinued] Operator Console Enclosure Panel for Units with 10 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS (Discontinued) Operator Console Enclosure Panel for Units with 10 HP Power Unit.png|alt=BE-TS (Discontinued) Operator Console Enclosure Panel for Units with 10 HP Power Unit|frameless|566x566px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0639<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |''Without holes''<br /> |1<br /> |-<br /> |2<br /> |E1024<br /> |TRACK-TERMINAL BLOCK<br /> |<br /> |''4 7/8&quot; LG''<br /> |1<br /> |-<br /> |3<br /> |E1020<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |9<br /> |-<br /> |4<br /> |E1330<br /> |END ANCHOR<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |E1040<br /> |END BARRIER<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0341<br /> |GROUND LUG<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> |''2 for track mounting''<br /> |3<br /> |-<br /> |8<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |''2 for track mounting''<br /> |3<br /> |-<br /> |9<br /> |HW0133<br /> |WASHER-FLAT-#8-SAE<br /> |<br /> |''2 for track mounting''<br /> |3<br /> |}<br /> '''&lt;big&gt;''[Current] Operator Console Enclosure for Units with 20 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS (Current) Operator Console Enclosure for Units with 20 HP Power Unit.png|alt=BE-TS (Current) Operator Console Enclosure for Units with 20 HP Power Unit|frameless|549x549px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |ENCLOSURE-8&quot; X 8&quot; X 4&quot;<br /> |<br /> |''Consult factory''<br /> |1<br /> |-<br /> |2<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |3<br /> |-<br /> |3<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .625&quot; to .750&quot;''<br /> |1<br /> |-<br /> |4<br /> |E0608-1<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''† Grip size .450&quot; to .560&quot;''<br /> |4<br /> |-<br /> |5<br /> |E0623<br /> |RESTRAINT-1/2&quot;-90 DEG<br /> |<br /> |''†'' ''Grip size .250&quot; to .375&quot;''<br /> |4<br /> |-<br /> |6<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |11<br /> |-<br /> |7<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |E1349<br /> |SEAL-KNOCKOUT-1/2&quot;<br /> |<br /> |''† See notes''<br /> |A/R<br /> |-<br /> |9<br /> |43037003-2<br /> |BRACKET-MOUNTING-ENCLOSURE<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> | rowspan=&quot;4&quot; |''Mounting bracket hardware (Not shown)''<br /> |2<br /> |-<br /> |12<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |2<br /> |-<br /> |14<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Restraints sold for machines equipped with all available options. Machines built without certain options will have Knockout Seals (Item #8) installed in place of restraints.''<br /> |}<br /> '''&lt;big&gt;''[Current] Operator Console Enclosure Panel for Units with 20 HP Power Unit''&lt;/big&gt;''' <br /> <br /> [[File:BE-TS (Current) Operator Console Enclosure Panel for Units with 20 HP Power Unit.png|alt=BE-TS (Current) Operator Console Enclosure Panel for Units with 20 HP Power Unit|frameless|527x527px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0135<br /> |PANEL-COMPONENT MOUNTING<br /> |<br /> |''Blank panel without holes''<br /> |1<br /> |-<br /> |2<br /> |E0908<br /> |MOUNTING RAIL<br /> |<br /> |''Sold by length''<br /> |A/R<br /> |-<br /> |3<br /> |YE0402<br /> |TERMINAL BLOCK<br /> |<br /> |<br /> |14<br /> |-<br /> |4<br /> |YE0405<br /> |END BARRIER<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |YE0406<br /> |END ANCHOR<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |E1074<br /> |JUMPER-2 POLE<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |E0130<br /> |GROUND BAR-7 POSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |HW1061<br /> |SCREW-RHMS-#8-32 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0130<br /> |SCREW-RHMS-#8-32 X 1/2&quot;<br /> |<br /> | rowspan=&quot;3&quot; |''Track and Wireway mounting hardware (Not shown)''<br /> |2<br /> |-<br /> |10<br /> |HW0133<br /> |WASHER-FLAT-#8<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0132<br /> |NUT-NILN-#8-32<br /> |<br /> |4<br /> |}<br /> <br /> === &lt;u&gt;&lt;big&gt;'''Junction Box'''&lt;/big&gt;&lt;/u&gt; ===<br /> [[File:BE-TS Junction Box.png|alt=BE-TS Junction Box|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |3<br /> |-<br /> |2<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |3<br /> |-<br /> |3<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .500&quot; to .625&quot;''<br /> |4<br /> |-<br /> |4<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .625&quot; to .750&quot;''<br /> |2<br /> |-<br /> |5<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Top Module Junction Box&lt;/big&gt;''''' ====<br /> [[File:BE-TS Junction Box.png|alt=BE-TS Junction Box|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E1329<br /> |JUNCTION BOX-4&quot; X 4&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |E0662<br /> |RESTRAINT-3/4&quot;-LIQUID TIGHT<br /> |<br /> |''Includes Locknut'' <br /> |1<br /> |-<br /> |3<br /> |E0632<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .625&quot; to .750&quot;''<br /> |1<br /> |-<br /> |4<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Wiring Diagrams&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;BE-TS with 10 HP Motor Wiring Diagram&lt;/big&gt;''''' ====<br /> [[File:BE-TS Wiring Diagram-10HP Motor.png|alt=BE-TS Wiring Diagram-10HP Motor|frameless|800x800px]]<br /> <br /> ==== '''''&lt;big&gt;BE-TS with Magnet and 10 HP Motor Wiring Diagram&lt;/big&gt;''''' ====<br /> [[File:BE-TS with Magnet and 10HP Motor Wiring Diagram.png|alt=BE-TS with Magnet and 10HP Motor Wiring Diagram|frameless|800x800px]]<br /> <br /> ==== '''''&lt;big&gt;BE-TS with Magnet and 20 HP Motor Wiring Diagram&lt;/big&gt;''''' ====<br /> [[File:BE-TS Magnet Wiring Diagram-20HP Motor.png|alt=BE-TS Magnet Wiring Diagram-20HP Motor|frameless|800x800px]]<br /> <br /> [[File:BE-TS Magnet Wiring Diagram-20HP Motor-02.png|alt=BE-TS Magnet Wiring Diagram-20HP Motor-02|frameless|800x800px]]<br /> <br /> [[File:BE-TS Magnet Wiring Diagram-20HP Motor-03.png|alt=BE-TS Magnet Wiring Diagram-20HP Motor-03|frameless|800x800px]]<br /> <br /> [[File:BE-TS Magnet Wiring Diagram-20HP Motor-04.png|alt=BE-TS Magnet Wiring Diagram-20HP Motor-04|frameless|800x800px]]<br /> <br /> == &lt;big&gt;Hydraulics&lt;/big&gt; ==<br /> <br /> === '''&lt;big&gt;&lt;u&gt;[Discontinued] 10 HP Power Unit&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:(Discontinued) BE-TS Power Unit (10HP).png|alt=(Discontinued) BE-TS Power Unit (10HP)|frameless|553x553px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0011<br /> |MOTOR-ELECTRIC-10HP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0326<br /> |ADAPTER-PUMP TO MOTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0325<br /> |PUMP-VANE-16 GPM<br /> |<br /> |''Variable displacement''<br /> |1<br /> |-<br /> |4<br /> |HC0327<br /> |COUPLING BODY-1 3/8&quot;<br /> |<br /> |''Motor end''<br /> |1<br /> |-<br /> |5<br /> |HC0329<br /> |SPIDER-COUPLING INSERT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HC0328<br /> |COUPLING BODY-7/8&quot;<br /> |<br /> |''Pump end''<br /> |1<br /> |-<br /> |7<br /> |HW0502<br /> |BOLT-HHCS-1/2-13 X 1 1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H1549<br /> |ADAPTER-#20 JICM X #24 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |H1595<br /> |ADAPTER-90 DEG-#20 JICM X #20 JICSW<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |H1609<br /> |ADAPTER-90 DEG-#12 JICM X #16 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |H1522<br /> |ADAPTER-#12 JICSW X #12 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |HC0260<br /> |VALVE-MAIN SYSTEM RELIEF<br /> |<br /> |<br /> |1<br /> |-<br /> |15a<br /> |43846003<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''†† For Item 15 (Not shown)''<br /> |A/R<br /> |-<br /> |16<br /> |HC0318<br /> |GAUGE-PRESSURE<br /> |<br /> |<br /> |1<br /> |-<br /> |17<br /> |H0206<br /> |PLUG-#4 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |H1108<br /> |ADAPTER-#10 JICM X #12 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |H1522<br /> |ADAPTER-#12 JICSW X #12 SAEM<br /> |<br /> |''† See note''<br /> |1<br /> |-<br /> |20<br /> |H1542<br /> |ADAPTER-#12 JICM X #12 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |21<br /> |HC0280<br /> |VALVE-CHECK<br /> |<br /> |''† See note''<br /> |1<br /> |-<br /> |22<br /> |H1542<br /> |ADAPTER-#12 JICM X #12 SAEM<br /> |<br /> |''† See note''<br /> |1<br /> |-<br /> |23<br /> |E0613<br /> |RESTRAINT-3/4&quot;<br /> |<br /> |''Grip size .500&quot; to .625&quot;''<br /> |1<br /> |-<br /> |23a<br /> |E0618<br /> |LOCKNUT-CONDUIT-3/4&quot;<br /> |<br /> |''For Item 23 (Not shown)''<br /> |1<br /> |-<br /> |24<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |25<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |26<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |27<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Parts noted used on units built after April 2001.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Cartridges are for replacement only.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;[Discontinued] 30 Gallon Reservoir&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:(Discontinued) BE-TS 30 Gallon Reservoir.png|alt=(Discontinued) BE-TS 30 Gallon Reservoir|frameless|542x542px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43842001<br /> |RESERVOIR-VERTICAL-30 GAL<br /> |<br /> |''Includes Items 1 through 8''<br /> |1<br /> |-<br /> |1<br /> |HC0542<br /> |GASKET-CHANNEL<br /> |<br /> |''Sold by length''<br /> |7'<br /> |-<br /> |2<br /> |HC0340<br /> |GAUGE-SIGHT<br /> |<br /> |''with Thermometer''<br /> |1<br /> |-<br /> |3<br /> |HC0306<br /> |STRAINER-SUCTION<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HC0308<br /> |FILLER/BREATHER ASSEMBLY<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0209<br /> |SCREW-RHMS-10-32 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |6<br /> |BI0110<br /> |ELBOW-STR-90 DEG-#16 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |8<br /> |H0208<br /> |PLUG-#12 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1590<br /> |ADAPTER-90 DEG-#16 JICM X #16 FNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |BI0102<br /> |ELBOW-#12 FNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |BI0020<br /> |NIPPLE-#12 NPT X 3&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |BI0301<br /> |TEE-#12 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |13<br /> |H1502<br /> |ADAPTER-#8 JICM X #12 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |BI0002<br /> |NIPPLE-CLOSE-#12 NPT<br /> |<br /> |<br /> |2<br /> |-<br /> |15<br /> |HC0307<br /> |RETURN LINE FILTER ASSEMBLY<br /> |<br /> |''Housing and Filter''<br /> |1<br /> |-<br /> |16<br /> |HC0317<br /> |FILTER-RETURN LINE<br /> |<br /> |''Replacement filter''<br /> |1<br /> |-<br /> |17<br /> |H1509<br /> |ADAPTER-#10 JICM X #12 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |18<br /> |HW0402<br /> |BOLT-HHCS-3/8-16 X 1&quot;<br /> |<br /> | rowspan=&quot;4&quot; |''Mounting hardware''<br /> <br /> ''(Not shown)''<br /> |4<br /> |-<br /> |19<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |8<br /> |-<br /> |20<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |4<br /> |-<br /> |21<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;[Current] Power Unit (20 HP)&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:(Current) BE-TS 30 Power Unit (20 HP).png|alt=(Current) BE-TS 30 Power Unit (20 HP)|frameless|531x531px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |E0040<br /> |MOTOR-ELECTRIC-20 HP<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |HC0357<br /> |ADAPTER-PUMP TO MOTOR<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0356<br /> |PUMP-PISTON-71CC<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |HC0358-M<br /> |COUPLING BODY-M300-1 5/8&quot; BORE<br /> |<br /> |''MOTOR SIDE''<br /> |1<br /> |-<br /> |5<br /> |HC0358-I<br /> |SPIDER-COUPLING INSERT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HC0358-P<br /> |COUPLING BODY-M300-1 1/4&quot; BORE<br /> |<br /> |''PUMP SIDE''<br /> |1<br /> |-<br /> |7<br /> |HW0602<br /> |BOLT-HHCS-5/8-11 X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0113<br /> |WASHER-LOCK-5/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |H1604<br /> |ADAPTER-90 DEG-#12 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HC0363<br /> |ADAPTER-FLANGE-#32 NPT<br /> |<br /> |''Includes O-ring''<br /> |1<br /> |-<br /> |11<br /> |HC0240<br /> |BLOCK-CHECK VALVE<br /> |<br /> |''Includes Cartridge &amp; O-ring''<br /> |1<br /> |-<br /> |12<br /> |N/A<br /> |CARTRIDGE-CHECK VALVE<br /> |<br /> |''† Replacement cartridge''<br /> |A/R<br /> |-<br /> |13<br /> |H0300<br /> |ELBOW-STR-90 DEG-#4 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |HC0318<br /> |GAUGE-PRESSURE<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |HE0704<br /> |ADAPTER-SPLIT FLANGE-1&quot;<br /> |<br /> |''2-Piece adapter with O-ring''<br /> |1<br /> |-<br /> |16<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |17<br /> |H0211<br /> |ADAPTER-#24 NPT X #12<br /> |<br /> |<br /> |1<br /> |-<br /> |18<br /> |E0661<br /> |RESTRAINT-3/4&quot;-90 DEG-LIQUID TIGHT<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |HW0513<br /> |BOLT-HHCS-1/2-13 X 2 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |20<br /> |HW0112<br /> |WASHER-FLAT-1/2&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |21<br /> |HW0110<br /> |WASHER-LOCK-1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |22<br /> |HW0007<br /> |NUT-HEX-1/2-13<br /> |<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTE<br /> |-<br /> | colspan=&quot;6&quot; |''† Consult factory''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;[Current] 45 Gallon Reservoir&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:(Current) BE-TS 45 Gallon Reservoir.png|alt=(Current) BE-TS 45 Gallon Reservoir|frameless|547x547px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |43842010<br /> |45 GAL RESERVOIR ASSEMBLY<br /> |<br /> |''Includes Items 1 through 7''<br /> |A/R<br /> |-<br /> |1<br /> |43848005<br /> |PLATE-COVER<br /> |<br /> |''† See note''<br /> |1<br /> |-<br /> |2<br /> |HC0308<br /> |FILLER/BREATHER ASSEMBLY<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0209<br /> |SCREW-RHMS-10-32 X 1/2&quot;<br /> |<br /> |<br /> |6<br /> |-<br /> |4<br /> |HC0340<br /> |GAUGE-SIGHT<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H0208<br /> |PLUG-#12 NPT<br /> |<br /> |''Non-IIoT equipped units only''<br /> |1<br /> |-<br /> |6<br /> |HW0302<br /> |BOLT-HHCS-1/4-20 X 3/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |7<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;<br /> |<br /> |<br /> |8<br /> |-<br /> |8<br /> |HC0361<br /> |HOUSING-FILTER<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HC0354<br /> |CARTRIDGE-FILTER<br /> |<br /> |''10 Micron filtration''<br /> |1<br /> |-<br /> |10<br /> |HC0362<br /> |FLANGE-SUCTION TUBE<br /> |<br /> |''Includes hardware''<br /> |1<br /> |-<br /> |11<br /> |43848008<br /> |TUBE-SUCTION<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |H1569<br /> |ADAPTER-45 DEG-#12 JICM X #12 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |H0202<br /> |REDUCER-#24 SAE X #12 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |H1622<br /> |ADAPTER-90 DEG-#12 SAEM X #12 JICM<br /> |<br /> |<br /> |1<br /> |-<br /> |15<br /> |H1644<br /> |PLUG-#24 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |16<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |18<br /> |H1610<br /> |ADAPTER-45 DEG-#12 JICSW X #12 JICM<br /> |<br /> |<br /> |1<br /> |-<br /> |19<br /> |PB0311-1<br /> |NIPPLE-#12 NPT X 2&quot;-BRASS<br /> |<br /> | rowspan=&quot;3&quot; |''†† See notes''<br /> |1<br /> |-<br /> |20<br /> |BI0301<br /> |TEE-#12 FNPT<br /> |<br /> |1<br /> |-<br /> |21<br /> |H1502<br /> |ADAPTER-#8 JICM X #12 MNPT<br /> |<br /> |2<br /> |-<br /> |22<br /> |HW0403<br /> |BOLT-HHCS-3/8-16 X 1 1/4&quot;<br /> |<br /> | rowspan=&quot;5&quot; |''Reservoir mounting hardware'' <br /> <br /> ''(Not shown)''<br /> |2<br /> |-<br /> |23<br /> |HW0405<br /> |BOLT-HHCS-3/8-16 X 2&quot;<br /> |<br /> |2<br /> |-<br /> |24<br /> |HW0108<br /> |WASHER-FLAT-3/8&quot;-SAE<br /> |<br /> |8<br /> |-<br /> |25<br /> |HW0107<br /> |WASHER-LOCK-3/8&quot;<br /> |<br /> |4<br /> |-<br /> |26<br /> |HW0005<br /> |NUT-HEX-3/8-16<br /> |<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† RVT silicone required to seal cover plate after removal.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† Components required for units equipped with radial piston drive wheel motors plumbed with case drain hoses. See Drive Wheel Assembly section.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Valve Assembly&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Lift Valve and Manifold Detail&lt;/big&gt;''''' ====<br /> [[File:BE-TS Lift Valve and Manifold.png|alt=BE-TS Lift Valve and Manifold|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |REF<br /> |80342001<br /> |LEVER VALVE RETRO KIT<br /> |<br /> |''† Required prior to 2006'' <br /> |A/R<br /> |-<br /> |1<br /> |HC0257<br /> |VALVE-LEVER<br /> |<br /> |''Effective from 2006 to Present''<br /> |1<br /> |-<br /> |2<br /> |HC0252<br /> |MANIFOLD-D05-1 BANK<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0318<br /> |BOLT-SHCS-1/4-20 X 1 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |H1642<br /> |PLUG-#12 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H1542<br /> |ADAPTER-#12 JICM X #12 SAEM<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |8<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |9<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |10<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |HC0248<br /> |FIXED FLOW REGULATOR<br /> |<br /> |''††14 GPM''<br /> |1<br /> |-<br /> |12<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |13<br /> |H1540<br /> |ADAPTER-#8 JICM X #8 SAEM<br /> |<br /> |''†† See notes''<br /> |1<br /> |-<br /> |14<br /> |43817085<br /> |PLATE-ADAPTER-VALVE<br /> |<br /> |''† Not shown''<br /> |1<br /> |-<br /> |15<br /> |SS0104<br /> |BOLT-SHCS-1/4-20 X 5/8&quot;-SST<br /> |<br /> |''† Not shown''<br /> |4<br /> |-<br /> |16<br /> |SS0300<br /> |WASHER-FLAT-1/4&quot;-SAE-SST<br /> |<br /> |''† Not shown''<br /> |4<br /> |-<br /> ! colspan=&quot;6&quot; |<br /> |-<br /> | colspan=&quot;6&quot; |''† Kit includes Items 1 &amp; 14 through 16. Minor modifications to the dash board required.''<br /> |-<br /> | colspan=&quot;6&quot; |''†† For units shipped April 2017 to present''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Floor Drive / Arm Rotation Valve and Manifold Detail&lt;/big&gt;''''' ====<br /> [[File:BE-TS Floor Drive-Arm Rotation Valve and Manifold.png|alt=BE-TS Floor Drive-Arm Rotation Valve and Manifold|frameless|570x570px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0233<br /> |VALVE-LEVER<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HC0251<br /> |MANIFOLD-D03-2 BANK<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1545<br /> |ADAPTER-#10 JICM X #10 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |H1600<br /> |ADAPTER-90 DEG-#6 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |H1587<br /> |ADAPTER-#6 JICSW X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HC0211<br /> |VALVE-ADJUSTABLE FLOW CONTROL<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |H1504<br /> |ADAPTER-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |H1640<br /> |PLUG-#6 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |11<br /> |43817033-2<br /> |RISER PLATE<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |13<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |14<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |15<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |HC0233-SK<br /> |SEAL KIT<br /> |<br /> |''For Item 1 (Not shown)''<br /> |A/R<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Valve Assembly&lt;/big&gt;''''' ====<br /> [[File:BE-TS Valve Assembly.png|alt=BE-TS Valve Assembly|frameless|538x538px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0233<br /> |VALVE-LEVER<br /> |<br /> |<br /> |3<br /> |-<br /> |2<br /> |HC0250<br /> |MANIFOLD-D03-3 BANK<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1610<br /> |ADAPTER-90 DEG-#10 JICM X #10 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |H1641<br /> |PLUG-#10 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H1000<br /> |ADAPTER-#8 SAEM X #4 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |H0001<br /> |NIPPLE-#4 NPT<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HC0247<br /> |FIXED FLOW REGULATOR-2.25 GPM<br /> |<br /> |''† See notes''<br /> |4<br /> |-<br /> |8<br /> |H1504<br /> |ADAPTER-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |9<br /> |H1640<br /> |PLUG-#6 SAE<br /> |<br /> |<br /> |1<br /> |-<br /> |10<br /> |H1540<br /> |ADAPTER-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |11<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |12<br /> |43817034-2<br /> |RISER PLATE<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |14<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |15<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |16<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |17<br /> |HC0233-SK<br /> |SEAL KIT<br /> |<br /> |''For Item 1 (Not shown)''<br /> |A/R<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Units built prior to January 2107 equipped with Adjustable Flow Controls. Fixed Flow Regulators are direct replacement for Adjustable Flow Controls.'' <br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Lift Cylinder&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Lift Cylinder.png|alt=BE-TS Lift Cylinder|frameless|582x582px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43822006<br /> |CLEVIS ASSEMBLY<br /> |<br /> |''Sold as assembly only''<br /> |4<br /> |-<br /> |2<br /> |HW0813<br /> |SCREW-SHSS-3/8-16 X 1/2&quot;<br /> |<br /> |''Nylon tipped''<br /> |8<br /> |-<br /> |3<br /> |HC0420<br /> |CYLINDER-LIFT<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |H1645<br /> |ADAPTER-90 DEG-#8 SAEM X #6 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |H0212<br /> |ADAPTER-#6 NPT X #8 FNPT<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HC0425<br /> |VELOCITY FUSE<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Lift Circuit&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Lift Circuit.png|alt=BE-TS Lift Circuit|frameless|553x553px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43017014-2<br /> |SUPPORT-PILOT DOWN MANIFOLD<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |43718008<br /> |STANDOFF<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0315<br /> |BOLT-HHCS-1/4-20 X 4 1/2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |10<br /> |-<br /> |7<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |5<br /> |-<br /> |8<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |5<br /> |}<br /> <br /> ==== '''''&lt;big&gt;[Discontinued] Lift Circuit Configuration&lt;/big&gt;''''' ====<br /> [[File:(Discontinued) BE-TS Lift Circuit Configuration.png|alt=(Discontinued) BE-TS Lift Circuit Configuration|frameless|507x507px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |H1507<br /> |ADAPTER-#8 JICM X #8 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |HC0264<br /> |VALVE-CHECK-PILOT TO OPEN<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H1621<br /> |ADAPTER-#4 SAEM X #2 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HC0269<br /> |VALVE-ADJUSTABLE FLOW CONTROL<br /> |<br /> |<br /> |1<br /> |-<br /> |7<br /> |H1591<br /> |ADAPTER-90 DEG-#6 JICM X #2 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |H1587<br /> |ADAPTER-#6 JICSW X #4 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1501<br /> |ADAPTER-#8 JICM X #6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43047002<br /> |MANIFOLD-PILOT DOWN<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> ==== '''''&lt;big&gt;[Current] Lift Circuit Configuration&lt;/big&gt;''''' ====<br /> [[File:(Current) BE-TS Lift Circuit Configuration.png|alt=(Current) BE-TS Lift Circuit Configuration|frameless|534x534px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0215<br /> |VALVE-CHECK-CARTRIDGE<br /> |<br /> |<br /> |8<br /> |-<br /> |2<br /> |H1560<br /> |ADAPTER-45 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |4<br /> |-<br /> |3<br /> |H1670<br /> |ADAPTER-45 DEG-#12 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |H1612<br /> |ADAPTER-90 DEG-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HC0283<br /> |VALVE-COUNTER BALANCE<br /> |<br /> |''Includes cartridge''<br /> |1<br /> |-<br /> |6<br /> |43846004<br /> |CARTRIDGE-COUNTER BALANCE<br /> |<br /> |''Replacement cartridge''<br /> |A/R<br /> |-<br /> |7<br /> |H1552<br /> |ADAPTER-#6 JICM X #6 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |H1587<br /> |ADAPTER-#6 JICSW X #4 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1501<br /> |ADAPTER-#8 JICM X #6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |43047002<br /> |MANIFOLD-PILOT DOWN<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H1579<br /> |ADAPTER-90 DEG-#6 JICM X #4 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Cartridges are for replacement only''<br /> |}<br /> <br /> ==== '''''&lt;big&gt;Down-Speed Flow Control&lt;/big&gt;''''' ====<br /> [[File:BE-TS Down-Speed Flow Control.png|alt=BE-TS Down-Speed Flow Control|frameless|551x551px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0270<br /> |VALVE-ADJUSTABLE FLOW CONTROL<br /> |<br /> |''Pressure compensated''<br /> |1<br /> |-<br /> |2<br /> |H0007<br /> |NIPPLE-#8 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1647<br /> |ADAPTER-90 DEG-#10 SAEM X #8 FNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |H1680<br /> |ADAPTER-#10 JICM X #8 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |H1690<br /> |ADAPTER-#10 JICSW X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |HC0248<br /> |FIXED FLOW REGULATOR<br /> |<br /> |''14 GPM''<br /> |1<br /> |-<br /> |7<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |H1612<br /> |ADAPTER-90 DEG-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |H1547<br /> |ADAPTER-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Cross Port Relief&lt;/u&gt;&lt;/big&gt;''' ===<br /> <br /> ==== '''''&lt;big&gt;Mounting Configuration&lt;/big&gt;''''' ====<br /> [[File:BE-TS Cross Port Relief Mounting Configuration.png|alt=BE-TS Cross Port Relief Mounting Configuration|frameless|546x546px]]<br /> {| class=&quot;wikitable&quot;<br /> ! colspan=&quot;6&quot; |UNITS BUILT PRIOR TO SEPTEMBER, 2014<br /> |-<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> ! colspan=&quot;6&quot; |UNITS BUILT SEPTEMBER, 2014 TO DECEMBER, 2014<br /> |-<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |2<br /> |HW0305<br /> |BOLT-HHCS-1/4-20 X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |7<br /> |43058004<br /> |PLATE-SPACER<br /> |<br /> |<br /> |1<br /> |}<br /> {| class=&quot;wikitable&quot;<br /> ! colspan=&quot;6&quot; |UNITS BUILT DECEMBER, 2014 TO PRESENT<br /> |-<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |2<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |<br /> |<br /> |&lt;nowiki&gt;-&lt;/nowiki&gt;<br /> |-<br /> |3<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |4<br /> |-<br /> |5<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |4<br /> |}<br /> ''NOTE: Effectivity dates refer to dates new extractor units shipped from the factory. Replacement part effectivity may differ due to factory inventory levels at time of parts order. Consult factory if unsure of parts needed.''<br /> <br /> ==== '''''&lt;big&gt;Components&lt;/big&gt;''''' ====<br /> [[File:BE-TS Cross Port Relief Components.png|alt=BE-TS Cross Port Relief Components|frameless|539x539px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0262<br /> |VALVE-CROSS PORT RELIEF<br /> |<br /> |''Includes cartridges''<br /> |1<br /> |-<br /> |2<br /> |43046002<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''For Item 1''<br /> |A/R<br /> |-<br /> |3<br /> |H1540<br /> |ADAPTER-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |<br /> |3<br /> |-<br /> |5<br /> |H1507<br /> |ADAPTER-#8 JICM X #8 MNPT<br /> |<br /> |<br /> |3<br /> |-<br /> |6<br /> |HC0239<br /> |VALVE-ADJUSTABLE FLOW CONTROL<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |H1568<br /> |ADAPTER-45 DEG-#8 JICM X #8 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |8<br /> |H1646<br /> |ADAPTER-90 DEG-#8 SAEM X #6 FNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |9<br /> |H0805<br /> |TEE-#6 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |HC0273<br /> |REGULATOR-FIXED FLOW<br /> |<br /> |''7.0 GPM''<br /> |4<br /> |-<br /> |11<br /> |H1501<br /> |ADAPTER-#8 JICM X #6 MNPT<br /> |<br /> |<br /> |4<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Floor Drive Cutout&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Floor Drive Cutout.png|alt=BE-TS Floor Drive Cutout|frameless|545x545px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |N/A<br /> |SOLENOID-DRIVE CUTOUT<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |H1521<br /> |ADAPTER-#8 JICSW X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1606<br /> |ADAPTER-90 DEG-#8 JICM X #8 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |4<br /> |E0611<br /> |JUNCTION BOX-4&quot; X 2&quot; X 2&quot;<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |E0612<br /> |COVER-JUNCTION BOX<br /> |<br /> |<br /> |1<br /> |-<br /> |6<br /> |E0616<br /> |RESTRAINT-1/2&quot;<br /> |<br /> |''Grip size .250&quot; to .375&quot;''<br /> |2<br /> |-<br /> |7<br /> |E0617<br /> |LOCKNUT-CONDUIT-1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |BI0001<br /> |NIPPLE-CLOSE-#8 NPT<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |N/A<br /> |SOLENOID-DRIVE CUTOUT<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |10<br /> |YE0501<br /> |CONNECTOR-SOLENOID<br /> |<br /> |''DIN 43650''<br /> |1<br /> |-<br /> |11<br /> |43058004<br /> |PLATE-SPACER<br /> |<br /> |<br /> |1<br /> |-<br /> |12<br /> |HC0278-TS/QS<br /> |SOLENOID-DRIVE CUTOUT<br /> |<br /> |<br /> |1<br /> |-<br /> |13<br /> |H1547<br /> |ADAPTER-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> |14<br /> |H1612<br /> |ADAPTER-90 DEG-#8 JICM X #10 SAEM<br /> |<br /> |<br /> |1<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Part obsolete. Must be replaced with Retro Kit Part # 80242007.''<br /> |-<br /> | colspan=&quot;6&quot; |''NOTE: Effectivity dates refer to dates new extractor units shipped from the factory. Replacement part effectivity may differ due to factory inventory levels at time of parts order. Consult factory if unsure of parts needed.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Counter Balance Valve&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Counter Balance Valve.png|alt=BE-TS Counter Balance Valve|frameless|554x554px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |HC0263<br /> |VALVE-COUNTER BALANCE<br /> |<br /> |<br /> |1<br /> |-<br /> |1a<br /> |43046004<br /> |REPLACEMENT CARTRIDGE<br /> |<br /> |''† For Item 1 (Not shown)''<br /> |A/R<br /> |-<br /> |2<br /> |H1615<br /> |ADAPTER-90 DEG-#6 JICM X #6 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |3<br /> |H1552<br /> |ADAPTER-#6 JICM X #6 SAEM<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0305<br /> |BOLT-HHCS-1/4-20 X 2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Cartridges are for replacement only''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Transition Plate&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Transition Plate.png|alt=BE-TS Transition Plate|frameless|576x576px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43817067-2<br /> |PLATE-TRANSITION<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |H0020<br /> |UNION-BULKHEAD-45 DEG-#6 JICM<br /> |<br /> |<br /> |8<br /> |-<br /> |3<br /> |H0021<br /> |NUT-BULKHEAD-#6 JIC<br /> |<br /> |<br /> |8<br /> |-<br /> |4<br /> |PL0501<br /> |GROMMET-1/2&quot; I.D.<br /> |<br /> |<br /> |1<br /> |-<br /> |5<br /> |HW0303<br /> |BOLT-HHCS-1/4-20 X 1&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |6<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |7<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Return Line Manifold&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Return Line Manifold.png|alt=BE-TS Return Line Manifold|frameless|555x555px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43847001<br /> |MANIFOLD-RETURN LINE<br /> |<br /> |<br /> |1<br /> |-<br /> |2<br /> |H1501<br /> |ADAPTER-#8 JICM X #6 MNPT<br /> |<br /> |<br /> |1<br /> |-<br /> |3<br /> |H1503<br /> |ADAPTER-#12 JICM X #12 MNPT<br /> |<br /> |<br /> |2<br /> |-<br /> |4<br /> |HW0308<br /> |BOLT-HHCS-1/4-20 X 2 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |5<br /> |HW0104<br /> |WASHER-FLAT-1/4&quot;-SAE<br /> |<br /> |<br /> |4<br /> |-<br /> |6<br /> |HW0103<br /> |WASHER-LOCK-1/4&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |7<br /> |HW0002<br /> |NUT-HEX-1/4-20<br /> |<br /> |<br /> |2<br /> |-<br /> |8<br /> |43817069-2<br /> |BRACKET-BULKHEAD<br /> |<br /> |<br /> |1<br /> |-<br /> |9<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> |10<br /> |H0015<br /> |UNION-BULKHEAD-90 DEG-#12 JICM<br /> |<br /> |<br /> |1<br /> |-<br /> |11<br /> |H0016<br /> |NUT-BULKHEAD-#12 JIC<br /> |<br /> |<br /> |1<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;EQ Chain Hose Guard&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS EQ Chain Hose Guard.png|alt=BE-TS EQ Chain Hose Guard|frameless|577x577px]]<br /> {| class=&quot;wikitable&quot;<br /> !ITEM<br /> !BHS PART NUMBER<br /> !DESCRIPTION<br /> !REF. KIT NO.<br /> !NOTES<br /> !NO. REQ<br /> |-<br /> |1<br /> |43017074-2<br /> |GUARD-HOSE-EQ CHAIN<br /> |<br /> |''† See notes''<br /> |1<br /> |-<br /> |2<br /> |HW0301<br /> |BOLT-SELF TAP &quot;F&quot;-1/4-20 X 1/2&quot;<br /> |<br /> |<br /> |2<br /> |-<br /> ! colspan=&quot;6&quot; |NOTES<br /> |-<br /> | colspan=&quot;6&quot; |''† Used on units manufactured after May 2015.''<br /> |}<br /> <br /> === '''&lt;big&gt;&lt;u&gt;Hydraulic Schematics&lt;/u&gt;&lt;/big&gt;''' ===<br /> [[File:BE-TS Hydraulic Schematic.png|alt=BE-TS Hydraulic Schematic|frameless|1180x1180px]]<br /> <br /> ==== '''''&lt;big&gt;Extended Reach Hydraulic Schematics&lt;/big&gt;''''' ====<br /> [[File:BE-TS Hydraulic Schematic Extended Reach.png|alt=BE-TS Hydraulic Schematic Extended Reach|frameless|905x905px]]<br /> <br /> == &lt;big&gt;Standard Available Options&lt;/big&gt; ==</div>

Kperrier https://tech.bhs1.com/index.php?title=File:BE-TS_Hydraulic_Schematic_Extended_Reach.png&diff=7636 2024-03-13T18:33:16Z

<p>Kperrier: </p> <hr /> <div>BE-TS Hydraulic Schematic Extended Reach</div>

Kperrier https://tech.bhs1.com/index.php?title=File:BE-TS_Hydraulic_Schematic.png&diff=7635 2024-03-13T18:31:58Z

<p>Kperrier: </p> <hr /> <div>BE-TS Hydraulic Schematic</div>

Kperrier https://tech.bhs1.com/index.php?title=File:BE-TS_EQ_Chain_Hose_Guard.png&diff=7634 2024-03-13T18:29:17Z

<p>Kperrier: </p> <hr /> <div>BE-TS EQ Chain Hose Guard</div>

Kperrier https://tech.bhs1.com/index.php?title=File:BE-TS_Return_Line_Manifold.png&diff=7633 2024-03-13T18:26:37Z

<p>Kperrier: </p> <hr /> <div>BE-TS Return Line Manifold</div>

Kperrier https://tech.bhs1.com/index.php?title=File:BE-TS_Transition_Plate.png&diff=7632 2024-03-13T18:24:26Z

<p>Kperrier: </p> <hr /> <div>BE-TS Transition Plate</div>

Kperrier https://tech.bhs1.com/index.php?title=File:BE-TS_Counter_Balance_Valve.png&diff=7631 2024-03-13T17:48:50Z

<p>Kperrier: </p> <hr /> <div>BE-TS Counter Balance Valve</div>

Kperrier